1 --------------------------------------------------------------------
3 --------------------------------------------------------------------
4 *** Version 3.0.24 stable ***
6 - Security fixes (denial of service):
7 - Prevent invalid reads in case of corrupt chunk-encoded content.
8 CVE-2016-1982. Bug discovered with afl-fuzz and AddressSanitizer.
9 - Remove empty Host headers in client requests.
10 Previously they would result in invalid reads. CVE-2016-1983.
11 Bug discovered with afl-fuzz and AddressSanitizer.
14 - When using socks5t, send the request body optimistically as well.
15 Previously the request body wasn't guaranteed to be sent at all
16 and the error message incorrectly blamed the server.
17 Fixes #1686 reported by Peter Müller and G4JC.
18 - Fixed buffer scaling in execute_external_filter() that could lead
19 to crashes. Submitted by Yang Xia in #892.
20 - Fixed crashes when executing external filters on platforms like
21 Mac OS X. Reported by Jonathan McKenzie on ijbswa-users@.
22 - Properly parse ACL directives with ports when compiled with HAVE_RFC2553.
23 Previously the port wasn't removed from the host and in case of
24 'permit-access 127.0.0.1 example.org:80' Privoxy would try (and fail)
25 to resolve "example.org:80" instead of example.org.
26 Reported by Pak Chan on ijbswa-users@.
27 - Check requests more carefully before serving them forcefully
28 when blocks aren't enforced. Privoxy always adds the force token
29 at the beginning of the path, but would previously accept it anywhere
30 in the request line. This could result in requests being served that
31 should be blocked. For example in case of pages that were loaded with
32 force and contained JavaScript to create additionally requests that
33 embed the origin URL (thus inheriting the force prefix).
34 The bug is not considered a security issue and the fix does not make
35 it harder for remote sites to intentionally circumvent blocks if
36 Privoxy isn't configured to enforce them.
37 Fixes #1695 reported by Korda.
38 - Normalize the request line in intercepted requests to make rewriting
39 the destination more convenient. Previously rewrites for intercepted
40 requests were expected to fail unless $hostport was being used, but
41 they failed "the wrong way" and would result in an out-of-memory
42 message (vanilla host patterns) or a crash (extended host patterns).
43 Reported by "Guybrush Threepwood" in #1694.
44 - Enable socket lingering for the correct socket.
45 Previously it was repeatedly enabled for the listen socket
46 instead of for the accepted socket. The bug was found by
47 code inspection and did not cause any (reported) issues.
48 - Detect and reject parameters for parameter-less actions.
49 Previously they were silently ignored.
50 - Fixed invalid reads in internal and outdated pcre code.
51 Found with afl-fuzz and AddressSanitizer.
52 - Prevent invalid read when loading invalid action files.
53 Found with afl-fuzz and AddressSanitizer.
54 - Windows build: Use the correct function to close the event handle.
55 It's unclear if this bug had a negative impact on Privoxy's behaviour.
56 Reported by Jarry Xu in #891.
57 - In case of invalid forward-socks5(t) directives, use the
58 correct directive name in the error messages. Previously they
59 referred to forward-socks4t failures.
60 Reported by Joel Verhagen in #889.
62 - General improvements:
63 - Set NO_DELAY flag for the accepting socket. This significantly reduces
64 the latency if the operating system is not configured to set the flag
65 by default. Reported by Johan Sintorn in #894.
66 - Allow to build with mingw x86_64. Submitted by Rustam Abdullaev in #135.
67 - Introduce the new forwarding type 'forward-webserver'.
68 Currently it is only supported by the forward-override{} action and
69 there's no config directive with the same name. The forwarding type
70 is similar to 'forward', but the request line only contains the path
71 instead of the complete URL.
72 - The CGI editor no longer treats 'standard.action' special.
73 Nowadays the official "standards" are part of default.action
74 and there's no obvious reason to disallow editing them through
75 the cgi editor anyway (if the user decided that the lack of
76 authentication isn't an issue in her environment).
77 - Improved error messages when rejecting intercepted requests
78 with unknown destination.
79 - A couple of log messages now include the number of active threads.
80 - Removed non-standard Proxy-Agent headers in HTTP snipplets
81 to make testing more convenient.
82 - Include the error code for pcre errors Privoxy does not recognize.
83 - Config directives with numerical arguments are checked more carefully.
84 - Privoxy's malloc() wrapper has been changed to prevent zero-size
85 allocations which should only occur as the result of bugs.
86 - Various cosmetic changes.
88 - Action file improvements:
89 - Unblock ".deutschlandradiokultur.de/".
90 Reported by u302320 in #924.
91 - Add two fast-redirect exceptions for "yandex.ru".
92 - Disable filter{banners-by-size} for ".plasmaservice.de/".
93 - Unblock "klikki.fi/adv/".
94 - Block requests for "resources.infolinks.com/".
95 Reported by "Black Rider" on ijbswa-users@.
96 - Block a bunch of criteo domains.
97 Reported by Black Rider.
98 - Block "abs.proxistore.com/abe/".
99 Reported by Black Rider.
100 - Disable filter{banners-by-size} for ".black-mosquito.org/".
101 - Disable fast-redirects for "disqus.com/".
103 - Documentation improvements:
104 - FAQ: Explicitly point fingers at ASUS as an example of a
105 company that has been reported to force malware based on
106 Privoxy upon its customers.
107 - Correctly document the action type for a bunch of "multi-value"
108 actions that were incorrectly documented to be "parameterized".
109 Reported by Gregory Seidman on ijbswa-users@.
110 - Fixed the documented type of the forward-override{} action
111 which is obviously 'parameterized'.
113 - Website improvements:
114 - Users who don't trust binaries served by SourceForge
115 can get them from a mirror. Migrating away from SourceForge
116 is planned for 2016 (TODO list item #53).
117 - The website is now available as onion service
118 (http://jvauzb4sb3bwlsnc.onion/).
120 *** Version 3.0.23 stable ***
123 - Fixed a DoS issue in case of client requests with incorrect
124 chunk-encoded body. When compiled with assertions enabled
125 (the default) they could previously cause Privoxy to abort().
126 Reported by Matthew Daley. CVE-2015-1380.
127 - Fixed multiple segmentation faults and memory leaks in the
128 pcrs code. This fix also increases the chances that an invalid
129 pcrs command is rejected as such. Previously some invalid commands
130 would be loaded without error. Note that Privoxy's pcrs sources
131 (action and filter files) are considered trustworthy input and
132 should not be writable by untrusted third-parties. CVE-2015-1381.
133 - Fixed an 'invalid read' bug which could at least theoretically
134 cause Privoxy to crash. So far, no crashes have been observed.
136 - Compiles with --disable-force again. Reported by Kai Raven.
137 - Client requests with body that can't be delivered no longer
138 cause pipelined requests behind them to be rejected as invalid.
139 Reported by Basil Hussain.
141 - General improvements:
142 - If a pcrs command is rejected as invalid, Privoxy now logs
143 the cause of the problem as text. Previously the pcrs error
145 - The tests are less likely to cause false positives.
147 - Action file improvements:
148 - '.sify.com/' is no longer blocked. Apparently it is not actually
149 a pure tracking site (anymore?). Reported by Andrew on ijbswa-users@.
150 - Unblock banners on .amnesty.de/ which aren't ads.
152 - Documentation improvements:
153 - The 'Would you like to donate?' section now also contains
155 - The list of supported operating systems has been updated.
156 - The existence of the SF support and feature trackers has been
157 deemphasized because they have been broken for months.
158 Most of the time the mailing lists still work.
159 - The claim that default.action updates are sometimes released
160 on their own has been removed. It hasn't happened in years.
161 - Explicitly mention that Tor's port may deviate from the default
162 when using a bundle. Requested by Andrew on ijbswa-users@.
164 *** Version 3.0.22 stable ***
167 - Fixed a memory leak when rejecting client connections due to
168 the socket limit being reached (CID 66382). This affected
169 Privoxy 3.0.21 when compiled with IPv6 support (on most
170 platforms this is the default). CVE-2015-1030.
171 - Fixed an immediate-use-after-free bug (CID 66394) and two
172 additional unconfirmed use-after-free complaints made by
173 Coverity scan (CID 66391, CID 66376). CVE-2015-1031.
174 - Actually show the FORCE_PREFIX value on the show-status page.
175 - Properly deal with Keep-Alive headers with timeout= parameters
176 If the timeout still can't be parsed, use the configured
177 timeout instead of preventing the client from keeping the
178 connection alive. Fixes #3615312/#870 reported by Bernard Guillot.
179 - Not using any filter files no longer results in warning messages
180 unless an action file is referencing header taggers or filters.
181 Reported by Stefan Kurtz in #3614835.
182 - Fixed a bug that prevented Privoxy from reusing some reusable
183 connections. Two bit masks with different purpose unintentionally
185 - A couple of additional bugs were discovered by Coverity Scan.
186 The fixes that are not expected to affect users are not explicitly
187 mentioned here, for details please have a look at the CVS logs.
189 - General improvements:
190 - Introduced negative tag patterns NO-REQUEST-TAG and NO-RESPONSE-TAG.
191 They apply if no matching tag is found after parsing client or
193 - Add support for external filters which allow to process the
194 response body with a script or program written in any language
195 the platform supports. External filters are enabled with
196 +external-filter{} after they have been defined in one of the
197 filter files with a header line starting with "EXTERNAL-FILTER:".
198 External filter support is experimental, not compiled by default
199 and known not to work on all platforms.
200 - Add support for the 'PATCH' method as defined in RFC5789.
201 - Reject requests with unsupported Expect header values.
202 Fixes a couple of Co-Advisor tests.
203 - Normalize the HTTP-version in forwarded requests and responses.
204 This is an explicit RFC 2616 MUST and RFC 7230 mandates that
205 intermediaries send their own HTTP-version in forwarded
207 - Server 'Keep-Alive' headers are no longer forwarded. From a user's
208 point of view it doesn't really matter, but RFC 2616 (obsolete)
209 mandates that the header is removed and this fixes a Co-Advisor
211 - Change declared template file encoding to UTF-8. The templates
212 already used a subset of UTF-8 anyway and changing the declaration
213 allows to properly display UTF-8 characters used in the action files.
214 This change may require existing action files with ISO-8859-1
215 characters that aren't valid UTF-8 to be converted to UTF-8.
216 Requested by Sam Chen in #582.
217 - Do not pass rejected keep-alive timeouts to the server. It might
218 not have caused any problems (we know of), but doing the right
219 thing shouldn't hurt either.
220 - Let log_error() use its own buffer size #define to make changing
221 the log buffer size slightly less inconvenient.
222 - Turned single-threaded into a "proper" toggle directive with arguments.
223 - CGI templates no longer enforce new windows for some links.
224 - Remove an undocumented workaround ('HOST' header removal) for
225 an Apple iTunes bug that according to #729900 got fixed in 2003.
227 - Action file improvements:
228 - The pattern 'promotions.' is no longer being blocked.
229 Reported by rakista in #3608540.
230 - Disable fast-redirects for .microsofttranslator.com/.
231 - Disable filter{banners-by-size} for .dgb-tagungszentren.de/.
232 - Add adn.speedtest.net as a site-specific unblocker.
233 Support request #3612908.
234 - Disable filter{banners-by-size} for creativecommons.org/.
235 - Block requests to data.gosquared.com/. Reported by cbug in #3613653.
236 - Unblock .conrad./newsletter/. Reported by David Bo in #3614238.
237 - Unblock .bundestag.de/.
238 - Unblock .rote-hilfe.de/.
239 - Disable fast-redirects for .facebook.com/plugins/like.php.
240 - Unblock Stackexchange popup URLs that aren't used to serve ads.
241 Reported by David Wagner in #3615179.
242 - Disable fast-redirects for creativecommons.org/.
243 - Unblock .stopwatchingus.info/.
244 - Block requests for .adcash.com/script/.
245 Reported by Tyrexionibus in #3615289.
246 - Disable HTML filters if the response was tagged as JavaScript.
247 Filtering JavaScript code with filters intended to deal with HTML
248 is usually a waste of time and, more importantly, may break stuff.
249 - Use a custom redirect{} for .washingtonpost.com/wp-apps/imrs\.php\?src=
250 Previously enabling the 'Advanced' settings (or manually enabling
251 +fast-redirects{}) prevented some images from being loaded properly.
252 - Unblock "adina*." Fixes #919 reported by Morton A. Goldberg.
254 - Unblock 'adele*.'. Reported by Adele Lime in #1663.
255 - Disable banners-by-size for kggp.de/.
257 - Filter file improvements & bug fixes:
258 - Decrease the chances that js-annoyances creates invalid JavaScript.
259 Submitted by John McGowan on ijbswa-users@.
260 - Let the msn filter hide 'related' ads again.
261 - Remove a stray '1' in the 'html-annoyances' filter.
262 - Prevent img-reorder from messing up img tags with empty src
263 attributes. Fixes #880 reported by Duncan.
265 - Documentation improvements:
266 - Updated the 'Would you like to donate?' section.
267 - Note that invalid forward-override{} parameter syntax isn't
268 detected until the parameter is used.
269 - Add another +redirect{} example: a shortcut for illumos bugs.
270 - Make it more obvious that many operating systems support log
271 rotation out of the box.
272 - Fixed dead links. Reported by Mark Nelson in #3614557.
273 - Rephrased the 'Why is the configuration so complicated?' answer
274 to be slightly less condescending. Anonymously suggested in #3615122.
275 - Be more explicit about accept-intercepted-requests's lack of MITM support.
276 - Make 'demoronizer' FAQ entries more generic.
277 - Add an example hostname to the --pre-chroot-nslookup description.
278 - Add an example for a host pattern that matches an IP address.
279 - Rename the 'domain pattern' to 'host pattern' as it may
280 contain IP addresses as well.
281 - Recommend forward-socks5t when using Tor. It seems to work fine and
282 modifying the Tor configuration to profit from it hasn't been necessary
284 - Add another redirect{} example to stress that redirect loops can
285 and should be avoided.
286 - The usual spelling and grammar fixes. Parts of them were
287 reported by Reuben Thomas in #3615276.
288 - Mention the PCRS option letters T and D in the filter section.
289 - Clarify that handle-as-empty-doc-returns-ok is still useful
290 and will not be removed without replacement.
291 - Note that security issues shouldn't be reported using the bug tracker.
292 - Clarify what Privoxy does if both +block{} and +redirect{} apply.
293 - Removed the obsolete bookmarklets section.
295 - Build system improvements:
296 - Let --with-group properly deal with secondary groups.
297 Patch submitted by Anatoly Arzhnikov in #3615187.
298 - Fix web-actions target.
299 - Add a web-faq target that only updates the FAQ on the webserver.
300 - Remove already-commented-out non-portable DOSFILTER alternatives.
301 - Remove the obsolete targets dok-put and dok-get.
302 - Add a sf-shell target.
304 *** Version 3.0.21 stable ***
307 - On POSIX-like platforms, network sockets with file descriptor
308 values above FD_SETSIZE are properly rejected. Previously they
309 could cause memory corruption in configurations that allowed
310 the limit to be reached.
311 - Proxy authentication headers are removed unless the new directive
312 enable-proxy-authentication-forwarding is used. Forwarding the
313 headers potentially allows malicious sites to trick the user
314 into providing them with login information.
315 Reported by Chris John Riley.
316 - Compiles on OS/2 again now that unistd.h is only included
317 on platforms that have it.
319 - General improvements:
320 - The show-status page shows the FEATURE_STRPTIME_SANITY_CHECKS status.
321 - A couple of assert()s that could theoretically dereference
322 NULL pointers in debug builds have been relocated.
323 - Added an LSB info block to the generic start script.
324 Based on a patch from Natxo Asenjo.
325 - The max-client-connections default has been changed to 128
326 which should be more than enough for most setups.
328 - Action file improvements:
329 - Block rover.ebay./ar.*\&adtype= instead of "/.*\&adtype=" which
330 caused too man false positives.
331 Reported by u302320 in #360284, additional feedback from Adam Piggott.
332 - Unblock '.advrider.com/' and '/.*ADVrider'.
333 Anonymously reported in #3603636.
334 - Stop blocking '/js/slider\.js'.
335 Reported by Adam Piggott in #3606635 and _lvm in #2791160.
337 - Filter file improvements:
338 - Added an iframes filter.
340 - Documentation improvements:
341 - The whole GPLv2 text is included in the user manual now,
342 so Privoxy can serve it itself and the user can read it
343 without having to wade through GPLv3 ads first.
344 - Properly numbered and underlined a couple of section titles
345 in the config that where previously overlooked due to a flaw
346 in the conversion script. Reported by Ralf Jungblut.
347 - Improved the support instruction to hopefully make it harder to
348 unintentionally provide insufficient information when requesting
349 support. Previously it wasn't obvious that the information we need
350 in bug reports is usually also required in support requests.
351 - Removed documentation about packages that haven't been provided
354 - Privoxy-Regression-Test:
355 - Only log the test number when not running in verbose mode
356 The position of the test is rarely relevant and it previously
357 wasn't exactly obvious which one of the numbers was useful to
358 repeat the test with --test-number.
360 - GNUmakefile improvements:
361 - Factor generate-config-file out of config-file to make testing
363 - The clean target now also takes care of patch leftovers.
365 *** Version 3.0.20 beta ***
368 - Client sockets are now properly shutdown and drained before being
369 closed. This fixes page truncation issues with clients that aggressively
370 pipeline data on platforms that otherwise discard already written data.
371 The issue mainly affected Opera users and was initially reported
372 by Kevin in #3464439, szotsaki provided additional information to track
374 - Fix latency calculation for shared connections (disabled by default).
375 It was broken since their introduction in 2009. The calculated latency
376 for most connections would be 0 in which case the timeout detection
377 failed to account for the real latency.
378 - Reject URLs with invalid port. Previously they were parsed incorrectly and
379 characters between the port number and the first slash were silently
380 dropped as shown by curl test 187.
381 - The default-server-timeout and socket-timeout directives accept 0 as
383 - Fix a race condition on Windows that could cause Privoxy to become
384 unresponsive after toggling it on or off through the taskbar icon.
385 Reported by Tim H. in #3525694.
386 - Fix the compilation on Windows when configured without IPv6 support.
387 - Fix an assertion that could cause debug builds to abort() in case of
388 socks5 connection failures with "debug 2" enabled.
389 - Fix an assertion that could cause debug builds to abort() if a filter
390 contained nul bytes in the replacement text.
392 - General improvements:
393 - Significantly improved keep-alive support for both client and server
395 - New debug log level 65536 which logs all actions that were applied to
397 - New directive client-header-order to forward client headers in a
398 different order than the one in which they arrived.
399 - New directive tolerate-pipelining to allow client-side pipelining.
400 If enabled (3.0.20 beta enables it by default), Privoxy will keep
401 pipelined client requests around to deal with them once the current
402 request has been served.
403 - New --config-test option to let Privoxy exit after checking whether or not
404 the configuration seems valid. The limitations noted in TODO #22 and #23
405 still apply. Based on a patch by Ramkumar Chinchani.
406 - New limit-cookie-lifetime{} action to let cookies expire before the end
407 of the session. Suggested by Rick Sykes in #1049575.
408 - Increase the hard-coded maximum number of actions and filter files from
409 10 to 30 (each). It doesn't significantly affect Privoxy's memory usage
410 and recompiling wasn't an option for all Privoxy users that reached the
412 - Add support for chunk-encoded client request bodies. Previously
413 chunk-encoded request bodies weren't guaranteed to be forwarded correctly,
414 so this can also be considered a bug fix although chunk-encoded request
415 bodies aren't commonly used in the real world.
416 - Add support for Tor's optimistic-data SOCKS extension, which can reduce the
417 latency for requests on newly created connections. Currently only the
418 headers are sent optimistically and only if the client request has already
419 been read completely which rules out requests with large bodies.
420 - After preventing the client from pipelining, don't signal keep-alive
421 intentions. When looking at the response headers alone, it previously
422 wasn't obvious from the client's perspective that no additional responses
424 - Stop considering client sockets tainted after receiving a request with body.
425 It hasn't been necessary for a while now and unnecessarily causes test
426 failures when using curl's test suite.
427 - Allow HTTP/1.0 clients to signal interest in keep-alive through the
428 Proxy-Connection header. While such client are rare in the real world, it
429 doesn't hurt and couple of curl tests rely on it.
430 - Only remove duplicated Content-Type headers when filters are enabled.
431 If they are not it doesn't cause ill effects and the user might not want it.
432 Downgrade the removal message to LOG_LEVEL_HEADER to clarify that it's not
433 an error in Privoxy and is unlikely to cause any problems in general.
434 Anonymously reported in #3599335.
435 - Set the socket option SO_LINGER for the client socket.
436 - Move several variable declarations to the beginning of their code block.
437 It's required when compiling with gcc 2.95 which is still used on some
438 platforms. Initial patch submitted by Simon South in #3564815.
439 - Optionally try to sanity-check strptime() results before trusting them.
440 Broken strptime() implementations have caused problems in the past and
441 the most recent offender seems to be FreeBSD's libc (standards/173421).
442 - When filtering is enabled, let Range headers pass if the range starts at
443 the beginning. This should work around (or at least reduce) the video
444 playback issues with various Apple clients as reported by Duc in #3426305.
445 - Do not confuse a client hanging up with a connection time out. If a client
446 closes its side of the connection without sending a request line, do not
447 send the CLIENT_CONNECTION_TIMEOUT_RESPONSE, but report the condition
449 - Allow closing curly braces as part of action values as long as they are
451 - On Windows, the logfile is now written before showing the GUI error
452 message which blocks until the user acknowledges it.
453 Reported by Adriaan in #3593603.
454 - Remove an unreasonable parameter limit in the CGI interface. The new
455 parameter limit depends on the memory available and is currently unlikely
456 to be reachable, due to other limits in both Privoxy and common clients.
457 Reported by Andrew on ijbswa-users@.
458 - Decrease the chances of parse failures after requests with unsupported
459 methods were sent to the CGI interface.
461 - Action file improvements:
462 - Remove the comment that indicated that updated default.action versions
463 are released on their own.
464 - Block 'optimize.indieclick.com/' and 'optimized-by.rubiconproject.com/'
465 - Unblock 'adjamblog.wordpress.com/' and 'adjamblog.files.wordpress.com/'.
466 Reported by Ryan Farmer in #3496116.
467 - Unblock '/.*Bugtracker'. Reported by pwhk in #3522341.
468 - Add test URLs for '.freebsd.org' and '.watson.org'.
469 - Unblock '.urbandictionary.com/popular'.
470 - Block '.adnxs.com/'.
471 - Block 'farm.plista.com/widgetdata.php'.
472 - Block 'rotation.linuxnewmedia.com/'.
473 - Block 'reklamy.sfd.pl/'. Reported by kacperdominik in #3399948.
474 - Block 'g.adspeed.net/'.
475 - Unblock 'websupport.wdc.com/'. Reported by Adam Piggot in #3577851.
476 - Block '/openx/www/delivery/'.
477 - Disable fast-redirects for '.googleapis.com/'.
478 - Block 'imp.double.net/'. Reported by David Bo in #3070411.
479 - Block 'gm-link.com/' which is used for email tracking.
480 Reported by David Bo in #1812733.
481 - Verify that requests to "bwp." are blocked. URL taken from #1736879
482 submitted by Francois Marier.
483 - Block '/.*bannerid='. Reported by Adam Piggott in #2975779.
484 - Block 'cltomedia.info/delivery/' and '.adexprt.com/'.
485 Anonymously reported in #2965254.
486 - Block 'de17a.com/'. Reported by David Bo in #3061472.
487 - Block 'oskar.tradera.com/'. Reported by David Bo in #3060596.
488 - Block '/scripts/webtrends\.js'. Reported by johnd16 in #3002729.
489 - Block requests for 'pool.*.adhese.com/'. Reported by johnd16 in #3002716.
490 - Update path pattern for Coremetrics and add tests.
491 Pattern and URLs submitted by Adam Piggott #3168443.
492 - Enable +fast-redirects{check-decoded-url} for 'tr.anp.se/'.
493 Reported by David Bo in #3268832.
494 - Unblock '.conrad.se/newsletter/banners/'. Reported by David Bo in #3413824.
495 - Block '.tynt.com/'. Reported by Dan Stahlke in #3421767.
496 - Unblock '.bbci.co.uk/radio/'. Reported by Adam Piggott in #3569603.
497 - Block requests to 'service.maxymiser.net/'.
498 Reported by johnd16 in #3118401 (with a previous URL).
499 - Disable fast-redirects for Google's "let's pretend your computer is
501 - Unblock '/.*download' to resolve actionsfile feedback #3498129.
502 Submitted by Steven Kolins (soundcloud.com not working).
503 - Unblock '.wlxrs.com/' which is required by hotmail.com.
504 Fixes #3413827 submitted by David Bo.
505 - Add two unblock patterns for popup radio and TV players.
506 Submitted by Adam Piggott in #3596089.
508 - Filter file improvements & bug fixes:
509 - Add a referer tagger.
510 - Reduce the likelihood that the google filter messes up HTML-generating
511 JavaScript. Reported by Zeno Kugy in #3520260.
513 - Documentation improvements:
514 - Revised all OS X sections due to new packaging module (OSXPackageBuilder).
515 - Update the list of supported operating systems to clarify that all Windows
516 versions after 95 are expected to work and note that the platform-specific
517 code for AmigaOS and QNX currently isn't maintained.
518 - Update 'Signals' section, the only explicitly handled signals are SIGINT,
520 - Add Haiku to the list of operating systems on which Privoxy is known to
522 - Add DragonFly to the list of BSDs on which Privoxy is known to run.
523 - Removed references to redhat-specific documentation set since it no longer
525 - Removed references to building PDFs since we no longer do so.
526 - Multiple listen-address directives are supported since 3.0.18, correct the
527 documentation to say so.
528 - Remove bogus section about long and short being preferable to int.
529 - Corrected some Internet JunkBuster references to Privoxy.
530 - Removed references to www.junkbusters.com since it is no longer
531 maintained. Reported by Angelina Matson.
532 - Various grammar and spelling corrections
533 - Add a client-header-tagger{} example for disabling filtering for range
535 - Correct a URL in the "Privoxy with Tor" FAQ.
536 - Spell 'refresh-tags' correctly. Reported by Don in #3571927.
537 - Sort manpage options alphabetically.
538 - Remove an incorrect sentence in the toggle section. The toggle state
539 doesn't affect whether or not the Windows version uses the tray icon.
540 Reported by Zeno Kugy in #3596395.
541 - Add new contributors since 3.0.19.
543 - Log message improvements:
544 - When stopping to watch a client socket due to pipelining, additionally log
546 - Log the client socket and its condition before closing it. This makes it
547 more obvious that the socket actually gets closed and should help when
548 diagnosing problems like #3464439.
549 - In case of SOCKS5 failures, do not explicitly log the server's response.
550 It hasn't helped so far and the response can already be logged by enabling
551 "debug 32768" anyway. This reverts v1.81 and the follow-up bug fix v1.84.
552 - Relocate the connection-accepted message from listen_loop() to serve().
553 This way it's printed by the thread that is actually serving the
554 connection which is nice when grepping for thread ids in log files.
557 - Remove compatibility layer for versions prior to 3.0 since it has been
558 obsolete for more than 10 years now.
559 - Remove the ijb_isupper() and ijb_tolower() macros from parsers.c since
560 they aren't used in this file.
561 - Removed the 'Functions declared include:' comment sections since they tend
562 to be incomplete, incorrect and out of date and the benefit seems
564 - Various comment grammar and comprehensibility improvements.
565 - Remove a pointless fflush() call in chat(). Flushing all streams pretty
566 much all the time for no obvious reason is ridiculous.
567 - Relocate ijb_isupper()'s definition to project.h and get the ijb_tolower()
568 definition from there, too.
569 - Relocate ijb_isdigit()'s definition to project.h.
570 - Rename ijb_foo macros to privoxy_foo.
571 - Add malloc_or_die() which will allow to simplify code paths where malloc()
572 failures don't need to be handled gracefully.
573 - Add strdup_or_die() which will allow to simplify code paths where strdup()
574 failures don't need to be handled gracefully.
575 - Replace strdup() calls with strdup_or_die() calls where it's safe and
577 - Fix white-space around parentheses.
578 - Add missing white-space behind if's and the following parentheses.
579 - Unwrap a memcpy() call in resolve_hostname_to_ip().
580 - Declare pcrs_get_delimiter()'s delimiters[] static const.
581 - Various optimisations to remove dead code and merge inefficient code
582 structures for improved clarity, performance or code compactness.
583 - Various data type corrections.
584 - Change visibility of several code segments when compiling without
585 FEATURE_CONNECTION_KEEP_ALIVE enabled for clarity.
586 - In pcrs_get_delimiter(), do not use delimiters outside the ASCII range.
587 Fixes a clang complaint.
588 - Fix an error message in get_last_url() nobody is supposed to see.
589 Reported by Matthew Fischer in #3507301.
590 - Fix a typo in the no-zlib-support complaint. Patch submitted by Matthew
592 - Shorten ssplit()'s prototype by removing the last two arguments. We always
593 want to skip empty fields and ignore leading delimiters, so having
594 parameters for this only complicates the API.
595 - Use an enum for the type of the action value.
596 - Rename action_name's member takes_value to value_type as it isn't used as
598 - Turn family mismatches in match_sockaddr() into fatal errors.
599 - Let enlist_unique_header() verify that the caller didn't pass a header
600 containing either \r or \n.
601 - Change the hashes used in load_config() to unsigned int. That's what
602 hash_string() actually returns and using a potentially larger type
604 - Use privoxy_tolower() instead of vanilla tolower() with manual casting of
606 - Catch ssplit() failures in parse_cgi_parameters().
608 - Privoxy-Regression-Test:
609 - Add an 'Overwrite condition' directive to skip any matching tests before
610 it. As it has a global scope, using it is more convenient than clowning
611 around with the Ignore directive.
612 - Log to STDOUT instead of STDERR.
613 - Include the Privoxy version in the output.
614 - Various grammar and spelling corrections in documentation and code.
615 - Additional tests for range requests with filtering enabled.
616 - Tests with mostly invalid range request.
617 - Add a couple of hide-if-modified-since{} tests with different date formats.
618 - Cleaned up the format of the regression-tests.action file to match the
619 format of default.action.
620 - Remove the "Copyright" line from print_version(). When using --help, every
621 line of screen space matters and thus shouldn't be wasted on things the
622 user doesn't care about.
624 - Privoxy-Log-Parser:
625 - Improve the --statistics performance by skipping sanity checks for input
626 that shouldn't affect the results anyway. Add a --strict-checks option
627 that enables some of the checks again, just in case anybody cares.
628 - The distribution of client requests per connection is included in
629 the --statistic output.
630 - The --accept-unknown-messages option has been removed and the behavior
632 - Accept and (mostly) highlight new log messages introduced with
636 - Bump generated Firefox version to 17.
638 - GNUmakefile improvements:
639 - The dok-tidy target no longer taints documents with a tidy-mark
640 - Change RA_MODE from 0664 to 0644. Suggested by Markus Dittrich in
642 - Remove tidy's clean flag as it changes the scope of attributes.
643 Link-specific colors end up being applied to all text. Reported by Adam
645 - Leave it up to the user whether or not smart tags are inserted.
646 - Let w3m itself do the line wrapping for the config file. It works better
647 than fmt as it can honour pre tags causing less unintentional line breaks.
648 - Ditch a pointless '-r' passed to rm to delete files.
649 - The config-file target now requires less manual intervention and updates
651 - Change WDUMP to generate ASCII. Add WDUMP_UTF8 to allow UTF-8 in the
652 AUTHORS file so the names are right.
653 - Stop pretending that lynx and links are supported for the documentation.
655 - configure improvements:
656 - On Haiku, do not pass -lpthread to the compiler. Haiku's pthreads
657 implementation is contained in its system library, libroot, so no
658 additional library needs to be searched.
659 Patch submitted by Simon South in #3564815.
660 - Additional Haiku-specific improvements. Disable checks intended for
661 multi-user systems as Haiku is presently single-user. Group Haiku-specific
662 settings in their own section, following the pattern for Solaris, OS/2 and
663 AmigaOS. Add additional library-related settings to remove the need for
664 providing configure with custom LDFLAGS.
665 Submitted by Simon South in #3574538.
667 *** Version 3.0.19 Stable ***
670 - Prevent a segmentation fault when de-chunking buffered content.
671 It could be triggered by malicious web servers if Privoxy was
672 configured to filter the content and running on a platform
673 where SIZE_T_MAX isn't larger than UINT_MAX, which probably
674 includes most 32-bit systems. On those platforms, all Privoxy
675 versions before 3.0.19 appear to be affected.
676 To be on the safe side, this bug should be presumed to allow
677 code execution as proving that it doesn't seems unrealistic.
678 - Do not expect a response from the SOCKS4/4A server until it
679 got something to respond to. This regression was introduced
680 in 3.0.18 and prevented the SOCKS4/4A negotiation from working.
681 Reported by qqqqqw in #3459781.
683 - General improvements:
684 - Fix an off-by-one in an error message about connect failures.
685 - Use a GNUMakefile variable for the webserver root directory and
686 update the path. Sourceforge changed it which broke various
688 - Update the CODE_STATUS description.
690 *** Version 3.0.18 Stable ***
693 - If a generated redirect URL contains characters RFC 3986 doesn't
694 permit, they are (re)encoded. Not doing this makes Privoxy versions
695 from 3.0.5 to 3.0.17 susceptible to HTTP response splitting (CWE-113)
696 attacks if the +fast-redirects{check-decoded-url} action is used.
697 - Fix a logic bug that could cause Privoxy to reuse a server
698 socket after it got tainted by a server-header-tagger-induced
699 block that was triggered before the whole server response had
700 been read. If keep-alive was enabled and the request following
701 the blocked one was to the same host and using the same forwarding
702 settings, Privoxy would send it on the tainted server socket.
703 While the server would simply treat it as a pipelined request,
704 Privoxy would later on fail to properly parse the server's
705 response as it would try to parse the unread data from the
706 first response as server headers for the second one.
707 Regression introduced in 3.0.17.
708 - When implying keep-alive in client_connection(), remember that
709 the client didn't. Fixes a regression introduced in 3.0.13 that
710 would cause Privoxy to wait for additional client requests after
711 receiving a HTTP/1.1 request with "Connection: close" set
712 and connection sharing enabled.
713 With clients which terminates the client connection after detecting
714 that the whole body has been received it doesn't really matter,
715 but with clients that don't the connection would be kept open until
717 - Fix a subtle race condition between prepare_csp_for_next_request()
718 and sweep(). A thread preparing itself for the next client request
719 could briefly appear to be inactive.
720 If all other threads were already using more recent files,
721 the thread could get its files swept away under its feet.
722 So far this has only been reproduced while stress testing in
723 valgrind while touching action files in a loop. It's unlikely
724 to have caused any actual problems in the real world.
725 - Disable filters if SDCH compression is used unless filtering is forced.
726 If SDCH was combined with a supported compression algorithm, Privoxy
727 previously could try to decompress it and ditch the Content-Encoding
728 header even though the SDCH compression wasn't dealt with.
729 Reported by zebul666 in #3225863.
730 - Make a copy of the --user value and only mess with that when splitting
731 user and group. On some operating systems modifying the value directly
732 is reflected in the output of ps and friends and can be misleading.
733 Reported by zepard in #3292710.
734 - If forwarded-connect-retries is set, only retry if Privoxy is actually
735 forwarding the request. Previously direct connections would be retried
737 - Fixed a small memory leak when retrying connections with IPv6
739 - Remove an incorrect assertion in compile_dynamic_pcrs_job_list()
740 It could be triggered by a pcrs job with an invalid pcre
741 pattern (for example one that contains a lone quantifier).
742 - If the --user argument user[.group] contains a dot, always bail out
743 if no group has been specified. Previously the intended, but undocumented
744 (and apparently untested), behaviour was to try interpreting the whole
745 argument as user name, but the detection was flawed and checked for '0'
746 instead of '\0', thus merely preventing group names beginning with a zero.
747 - In html_code_map[], use a numeric character reference instead of '
748 which wasn't standardized before XHTML 1.0.
749 - Fix an invalid free when compiled with FEATURE_GRACEFUL_TERMINATION
750 and shut down through http://config.privoxy.org/die
751 - In get_actions(), fix the "temporary" backwards compatibility hack
752 to accept block actions without reason.
753 It also covered other actions that should be rejected as invalid.
754 Reported by Billy Crook.
756 - General improvements:
757 - Privoxy can (re)compress buffered content before delivering
758 it to the client. Disabled by default as most users wouldn't
760 - The +fast-redirects{check-decoded-url} action checks URL
761 segments separately. If there are other parameters behind
762 the redirect URL, this makes it unnecessary to cut them off
763 by additionally using a +redirect{} pcrs command.
764 Initial patch submitted by Jamie Zawinski in #3429848.
765 - When loading action sections, verify that the referenced filters
766 exist. Currently missing filters only result in an error message,
767 but eventually the severity will be upgraded to fatal.
768 - Allow to bind to multiple separate addresses.
769 Patch set submitted by Petr Pisar in #3354485.
770 - Set socket_error to errno if connecting fails in rfc2553_connect_to().
771 Previously rejected direct connections could be incorrectly reported
772 as DNS issues if Privoxy was compiled with IPv6 support.
773 - Adjust url_code_map[] so spaces are replaced with %20 instead of '+'
774 While '+' can be used by client's submitting form data, this is not
775 actually what Privoxy is using the lookups for. This is more of a
776 cosmetic issue and doesn't fix any known problems.
777 - When compiled without FEATURE_FAST_REDIRECTS, do not silently
778 ignore +fast-redirect{} directives
779 - Added a workaround for GNU libc's strptime() reporting negative
780 year values when the parsed year is only specified with two digits.
781 On affected systems cookies with such a date would not be turned
782 into session cookies by the +session-cookies-only action.
783 Reported by Vaeinoe in #3403560
784 - Fixed bind failures with certain GNU libc versions if no non-loopback
785 IP address has been configured on the system. This is mainly an issue
786 if the system is using DHCP and Privoxy is started before the network
787 is completely configured.
788 Reported by Raphael Marichez in #3349356.
789 Additional insight from Petr Pisar.
790 - Privoxy log messages now use the ISO 8601 date format %Y-%m-%d.
791 It's only slightly longer than the old format, but contains
792 the full date including the year and allows sorting by date
793 (when grepping in multiple log files) without hassle.
794 - In get_last_url(), do not bother trying to decode URLs that do
795 not contain at least one '%' sign. It reduces the log noise and
796 a number of unnecessary memory allocations.
797 - In case of SOCKS5 failures, dump the socks response in the log message.
798 - Simplify the signal setup in main().
799 - Streamline socks5_connect() slightly.
800 - In socks5_connect(), require a complete socks response from the server.
801 Previously Privoxy didn't care how much data the server response
802 contained as long as the first two bytes contained the expected
803 values. While at it, shrink the buffer size so Privoxy can't read
804 more than a whole socks response.
805 - In chat(), do not bother to generate a client request in case of
806 direct CONNECT requests. It will not be used anyway.
807 - Reduce server_last_modified()'s stack size.
808 - Shorten get_http_time() by using strftime().
809 - Constify the known_http_methods pointers in unknown_method().
810 - Constify the time_formats pointers in parse_header_time().
811 - Constify the formerly_valid_actions pointers in action_used_to_be_valid().
812 - Introduce a GNUMakefile MAN_PAGE variable that defaults to privoxy.1.
813 The Debian package uses section 8 for the man page and this
814 should simplify the patch.
815 - Deduplicate the INADDR_NONE definition for Solaris by moving it to jbsockets.h
816 - In block_url(), ditch the obsolete workaround for ancient Netscape versions
817 that supposedly couldn't properly deal with status code 403.
818 - Remove a useless NULL pointer check in load_trustfile().
819 - Remove two useless NULL pointer checks in load_one_re_filterfile().
820 - Change url_code_map[] from an array of pointers to an array of arrays
821 It removes an unnecessary layer of indirection and on 64bit system reduces
822 the size of the binary a bit.
823 - Fix various typos. Fixes taken from Debian's 29_typos.dpatch by Roland Rosenfeld.
824 - Add a dok-tidy GNUMakefile target to clean up the messy HTML
825 generated by the other dok targets.
826 - GNUisms in the GNUMakefile have been removed.
827 - Change the HTTP version in static responses to 1.1
828 - Synced config.sub and config.guess with upstream
829 2011-11-11/386c7218162c145f5f9e1ff7f558a3fbb66c37c5.
830 - Add a dedicated function to parse the values of toggles. Reduces duplicated
831 code in load_config() and provides better error handling. Invalid or missing
832 toggle values are now a fatal error instead of being silently ignored.
833 - Terminate HTML lines in static error messages with \n instead of \r\n.
834 - Simplify cgi_error_unknown() a bit.
835 - In LogPutString(), don't bother looking at pszText when not
836 actually logging anything.
837 - Change ssplit()'s fourth parameter from int to size_t.
838 Fixes a clang complaint.
839 - Add a warning that the statistics currently can't be trusted.
840 Mention Privoxy-Log-Parser's --statistics option as
841 an alternative for the time being.
842 - In rfc2553_connect_to(), start setting cgi->error_message on error.
843 - Change the expected status code returned for http://p.p/die depending
844 on whether or not FEATURE_GRACEFUL_TERMINATION is available.
845 - In cgi_die(), mark the client connection for closing.
846 If the client will fetch the style sheet through another connection
847 it gets the main thread out of the accept() state and should thus
848 trigger the actual shutdown.
849 - Add a proper CGI message for cgi_die().
850 - Don't enforce a logical line length limit in read_config_line().
851 - Slightly refactor server_last_modified() to remove useless gmtime*() calls.
852 - In get_content_type(), also recognize '.jpeg' as JPEG extension.
853 - Add '.png' to the list of recognized file extensions in get_content_type().
854 - In block_url(), consistently use the block reason "Request blocked by Privoxy"
855 In two places the reason was "Request for blocked URL" which hides the
856 fact that the request got blocked by Privoxy and isn't necessarily
857 correct as the block may be due to tags.
858 - In listen_loop(), reload the configuration files after accepting
859 a new connection instead of before.
860 Previously the first connection that arrived after a configuration
861 change would still be handled with the old configuration.
862 - In chat()'s receive-data loop, skip a client socket check if
863 the socket will be written to right away anyway. This can
864 increase the transfer speed for unfiltered content on fast
866 - The socket timeout is used for SOCKS negotiations as well which
867 previously couldn't timeout.
868 - Don't keep the client connection alive if any configuration file
869 changed since the time the connection came in. This is closer to
870 Privoxy's behaviour before keep-alive support for client connection
871 has been added and also less confusing in general.
872 - Treat all Content-Type header values containing the pattern
873 'script' as a sign of text. Reported by pribog in #3134970.
875 - Action file improvements:
876 - Moved the site-specific block pattern section below the one for the
877 generic patterns so for requests that are matched in both, the block
878 reason for the domain is shown which is usually more useful than showing
879 the one for the generic pattern.
880 - Remove -prevent-compression from the fragile alias. It's no longer
881 used anywhere by default and isn't known to break stuff anyway.
882 - Add a (disabled) section to block various Facebook tracking URLs.
883 Reported by Dan Stahlke in #3421764.
884 - Add a (disabled) section to rewrite and redirect click-tracking
885 URLs used on news.google.com.
886 Reported by Dan Stahlke in #3421755.
887 - Unblock linuxcounter.net/.
888 Reported by Dan Stahlke in #3422612.
889 - Block 'www91.intel.com/' which is used by Omniture.
890 Reported by Adam Piggott in #3167370.
891 - Disable the handle-as-empty-doc-returns-ok option and mark it as deprecated.
892 Reminded by tceverling in #2790091.
893 - Add ".ivwbox.de/" to the "Cross-site user tracking" section.
894 Reported by Nettozahler in #3172525.
895 - Unblock and fast-redirect ".awin1.com/.*=http://".
896 Reported by Adam Piggott in #3170921.
897 - Block "b.collective-media.net/".
898 - Widen the Debian popcon exception to "qa.debian.org/popcon".
899 Seen in Debian's 05_default_action.dpatch by Roland Rosenfeld.
900 - Block ".gemius.pl/" which only seems to be used for user tracking.
901 Reported by johnd16 in #3002731. Additional input from Lee and movax.
902 - Disable banners-by-size filters for '.thinkgeek.com/'.
903 The filter only seems to catch pictures of the inventory.
904 - Block requests for 'go.idmnet.bbelements.com/please/showit/'.
905 Reported by kacperdominik in #3372959.
906 - Unblock adainitiative.org/.
907 - Add a fast-redirects exception for '.googleusercontent.com/.*=cache'.
908 - Add a fast-redirects exception for webcache.googleusercontent.com/.
909 - Unblock http://adassier.wordpress.com/ and http://adassier.files.wordpress.com/.
911 - Filter file improvements:
912 - Let the yahoo filter hide '.ads'.
913 - Let the msn filter hide overlay ads for Facebook 'likes' in search
914 results and elements with the id 's_notf_div'. They only seem to be
915 used to advertise site 'enhancements'.
916 - Let the js-events filter additionally disarm setInterval().
917 Suggested by dg1727 in #3423775.
919 - Documentation improvements:
920 - Clarify the effect of compiling Privoxy with zlib support.
921 Suggested by dg1727 in #3423782.
922 - Point out that the SourceForge messaging system works like a black
923 hole and should thus not be used to contact individual developers.
924 - Mention some of the problems one can experience when not explicitly
925 configuring an IP addresses as listen address.
926 - Explicitly mention that hostnames can be used instead of IP addresses
927 for the listen-address, that only the first address returned will be
928 used and what happens if the address is invalid.
929 Requested by Calestyo in #3302213.
931 - Log message improvements:
932 - If only the server connection is kept alive, do not pretend to
933 wait for a new client request.
934 - Remove a superfluous log message in forget_connection().
935 - In chat(), properly report missing server responses as such
936 instead of calling them empty.
937 - In forwarded_connect(), fix a log message nobody should ever see.
938 - Fix a log message in socks5_connect(), a failed write operation
939 was logged as failed read operation.
940 - Let load_one_actions_file() properly complain about a missing
941 '{' at the beginning of the file.
942 Simply stating that a line is invalid isn't particularly helpful.
943 - Do not claim to listen on a socket until Privoxy actually does.
944 Patch submitted by Petr Pisar #3354485
945 - Prevent a duplicated LOG_LEVEL_CLF message when sending out
946 the "no-server-data" response.
947 - Also log the client socket when dropping a connection.
948 - Include the destination host in the 'Request ... marked for
949 blocking. limit-connect{...} doesn't allow CONNECT ...' message
950 Patch submitted by Saperski in #3296250.
951 - Prevent a duplicated log message if none of the resolved IP
952 addresses were reachable.
953 - In connect_to(), do not pretend to retry if forwarded-connect-retries
955 - When a specified user or group can't be found, put the name in
956 single-quotes when logging it.
957 - In rfc2553_connect_to(), explain getnameinfo() errors better.
958 - Remove a useless log message in chat().
959 - When retrying to connect, also log the maximum number of connection
961 - Rephrase a log message in compile_dynamic_pcrs_job_list().
962 Divide the error code and its meaning with a colon. Call the pcrs
963 job dynamic and not the filter. Filters may contain dynamic and
964 non-dynamic pcrs jobs at the same time. Only mention the name of
965 the filter or tagger, but don't claim it's a filter when it could
967 - In a fatal error message in load_one_actions_file(), cover both
968 URL and TAG patterns.
969 - In pcrs_strerror(), properly report unknown positive error code
970 values as such. Previously they were handled like 0 (no error).
971 - In compile_dynamic_pcrs_job_list(), also log the actual error code as
972 pcrs_strerror() doesn't handle all errors reported by pcre.
973 - Don't bother trying to continue chatting if the client didn't ask for it.
974 Reduces log noise a bit.
975 - Make two fatal error message in load_one_actions_file() more descriptive.
976 - In cgi_send_user_manual(), log when rejecting a file name due to '/' or '..'.
977 - In load_file(), log a message if opening a file failed.
978 The CGI error message alone isn't too helpful.
979 - In connection_destination_matches(), improve two log messages
980 to help understand why the destinations don't match.
981 - Rephrase a log message in serve(). Client request arrival
982 should be differentiated from closed client connections now.
983 - In serve(), log if a client connection isn't reused due to a
984 configuration file change.
985 - Let mark_server_socket_tainted() always mark the server socket tainted,
986 just don't talk about it in cases where it has no effect. It doesn't change
987 Privoxy's behaviour, but makes understanding the log file easier.
990 - Added a --disable-ipv6-support switch for platforms where support
991 is detected but doesn't actually work.
992 - Do not check for the existence of strerror() and memmove() twice
993 - Remove a useless test for setpgrp(2). Privoxy doesn't need it and
994 it can cause problems when cross-compiling.
995 - Rename the --disable-acl-files switch to --disable-acl-support.
996 Since about 2001, ACL directives are specified in the standard
998 - Update the URL of the 'Removing outdated PCRE version after the
999 next stable release' posting. The old URL stopped working after
1000 one of SF's recent site "optimizations". Reported by Han Liu.
1002 - Privoxy-Regression-Test:
1003 - Added --shuffle-tests option to increase the chances of detection race conditions.
1004 - Added a --local-test-file option that allows to use Privoxy-Regression-Test without Privoxy.
1005 - Added tests for missing socks4 and socks4a forwarders.
1006 - The --privoxy-address option now works with IPv6 addresses containing brackets, too.
1007 - Perform limited sanity checks for parameters that are supposed to have numerical values.
1008 - Added a --sleep-time option to specify a number of seconds to
1009 sleep between tests, defaults to 0.
1010 - Disable the range-requests tagger for tests that break if it's enabled.
1011 - Log messages use the ISO 8601 date format %Y-%m-%d.
1012 - Fix spelling in two error messages.
1013 - In the --help output, include a list of supported tests and their default levels.
1014 - Adjust the tests to properly deal with FEATURE_TOGGLE being disabled.
1016 - Privoxy-Log-Parser:
1017 - Perform limited sanity checks for command line parameters that
1018 are supposed to have numerical values.
1019 - Implement a --unbreak-lines-only option to try to revert MUA breakage.
1020 - Accept and highlight: Added header: Content-Encoding: deflate
1021 - Accept and highlight: Compressed content from 29258 to 8630 bytes.
1022 - Accept and highlight: Client request arrived in time on socket 21.
1023 - Highlight: Didn't receive data in time: a.fsdn.com:443
1024 - Accept log messages with ISO 8601 time stamps, too.
1027 - Bump generated Firefox version to 8.0.
1028 - Only randomize the release date if the new --randomize-release-date
1029 option is enabled. Firefox versions after 4 use a fixed date string
1032 *** Version 3.0.17 Stable ***
1034 - Fixed last-chunk-detection for responses where the body was small
1035 enough to be read with the headers, causing Privoxy to wait for the
1036 end of the content until the server closed the connection or the
1037 request timed out. Reported by "Karsten" in #3028326.
1038 - Responses with status code 204 weren't properly detected as body-less
1039 like RFC2616 mandates. Like the previous bug, this caused Privoxy to
1040 wait for the end of the content until the server closed the connection
1041 or the request timed out. Fixes #3022042 and #3025553, reported by a
1042 user with no visible name. Most likely also fixes a bunch of other
1043 AJAX-related problem reports that got closed in the past due to
1044 insufficient information and lack of feedback.
1045 - Fixed an ACL bug that made it impossible to build a blacklist.
1046 Usually the ACL directives are used in a whitelist, which worked
1047 as expected, but blacklisting is still useful for public proxies
1048 where one only needs to deny known abusers access.
1049 - Added LOG_LEVEL_RECEIVED to log the not-yet-parsed data read from the
1050 network. This should make debugging various parsing issues a lot easier.
1051 - The IPv6 code is enabled by default on Windows versions that support it.
1052 Patch submitted by oCameLo in #2942729.
1053 - In mingw32 versions, the user.filter file is reachable through the
1054 GUI, just like default.filter is. Feature request 3040263.
1055 - Added the configure option --enable-large-file-support to set a few
1056 defines that are required by platforms like GNU/Linux to support files
1057 larger then 2GB. Mainly interesting for users without proper logfile
1059 - Logging with "debug 16" no longer stops at the first nul byte which is
1060 pretty useless. Non-printable characters are replaced with their hex value
1061 so the result can't span multiple lines making parsing them harder then
1063 - Privoxy logs when reading an action, filter or trust file.
1064 - Fixed incorrect regression test markup which caused a test in
1065 3.0.16 to fail while Privoxy itself was working correctly.
1066 While Privoxy accepts hide-referer, too, the action name is actually
1067 hide-referrer which is also the name used one the final results page,
1068 where the test expected the alias.
1070 - CGI interface improvements:
1071 - In finish_http_response(), continue to add the 'Connection: close'
1072 header if the client connection will not be kept alive.
1073 Anonymously pointed out in #2987454.
1074 - Apostrophes in block messages no longer cause parse errors
1075 when the blocked page is viewed with JavaScript enabled.
1076 Reported by dg1727 in #3062296.
1077 - Fix a bunch of anchors that used underscores instead of dashes.
1078 - Allow to keep the client connection alive after crunching the previous request.
1079 Already opened server connections can be kept alive, too.
1080 - In cgi_show_url_info(), don't forget to prefix URLs that only contain
1081 http:// or https:// in the path. Fixes #2975765 reported by Adam Piggott.
1082 - Show the 404 CGI page if cgi_send_user_manual() is called while
1083 local user manual delivery is disabled.
1085 - Action file improvements:
1086 - Enable user.filter by default. Suggested by David White in #3001830.
1087 - Block .sitestat.com/. Reported by johnd16 in #3002725.
1088 - Block .atemda.com/. Reported by johnd16 in #3002723.
1089 - Block js.adlink.net/. Reported by johnd16 in #3002720.
1090 - Block .analytics.yahoo.com/. Reported by johnd16 in #3002713.
1091 - Block sb.scorecardresearch.com, too. Reported by dg1727 in #2992652.
1092 - Fix problems noticed on Yahoo mail and news pages.
1093 - Remove the too broad yahoo section, only keeping the
1094 fast-redirects exception as discussed on ijbswa-devel@.
1095 - Don't block adesklets.sourceforge.net. Reported in #2974204.
1096 - Block chartbeat ping tracking. Reported in #2975895.
1097 - Tag CSS and image requests with cautious and medium settings, too.
1098 - Don't handle view.atdmt.com as image. It's used for click-throughs
1099 so users should be able to "go there anyway".
1100 Reported by Adam Piggott in #2975927.
1101 - Also let the refresh-tags filter remove invalid refresh tags where
1102 the 'url=' part is missing. Anonymously reported in #2986382.
1103 While at it, update the description to mention the fact that only
1104 refresh tags with refresh times above 9 seconds are covered.
1105 - javascript needs to be blocked with +handle-as-empty-document to
1106 work around Firefox bug 492459. So move .js blockers from
1107 +block{Might be a web-bug.} -handle-as-empty-document to
1108 +block{Might be a web-bug.} +handle-as-empty-document.
1109 - ijbswa-Feature Requests-3006719 - Block 160x578 Banners.
1110 - Block another omniture tracking domain.
1111 - Added a range-requests tagger.
1112 - Added two sections to get Flickr's Ajax interface working with
1113 default pre-settings. If you change the configuration to block
1114 cookies by default, you'll need additional exceptions.
1115 Reported by Mathias Homann in #3101419 and by Patrick on ijbswa-users@.
1117 - Documentation improvements:
1118 - Explicitly mention how to match all URLs.
1119 - Consistently recommend socks5 in the Tor FAQ entry and mention
1120 its advantage compared to socks4a. Reported by David in #2960129.
1121 - Slightly improve the explanation of why filtering may appear
1123 - Grammar fixes for the ACL section.
1124 - Fixed a link to the 'intercepting' entry and add another one.
1125 - Rename the 'Other' section to 'Mailing Lists' and reword it
1126 to make it clear that nobody is forced to use the trackers
1127 - Note that 'anonymously' posting on the trackers may not always
1129 - Suggest to enable debug 32768 when suspecting parsing problems.
1131 - Privoxy-Log-Parser improvements:
1132 - Gather statistics for ressources, methods, and HTTP versions
1134 - Also gather statistics for blocked and redirected requests.
1135 - Provide the percentage of keep-alive offers the client accepted.
1136 - Add a --url-statistics-threshold option.
1137 - Add a --host-statistics-threshold option to also gather
1138 statistics about how many request where made per host.
1139 - Fix a bug in handle_loglevel_header() where a 'scan: ' got lost.
1140 - Add a --shorten-thread-ids option to replace the thread id with
1142 - Accept and ignore: Looks like we got the last chunk together
1143 with the server headers. We better stop reading.
1144 - Accept and ignore: Continue hack in da house.
1145 - Accept and higlight: Rejecting connection from 10.0.0.2.
1146 Maximum number of connections reached.
1147 - Accept and highlight: Loading actions file: /usr/local/etc/privoxy/default.action
1148 - Accept and highlight: Loading filter file: /usr/local/etc/privoxy/default.filter
1149 - Accept and highlight: Killed all-caps Host header line: HOST: bestproxydb.com
1150 - Accept and highlight: Reducing expected bytes to 0. Marking
1151 the server socket tainted after throwing 4 bytes away.
1152 - Accept: Merged multiple header lines to: 'X-FORWARDED-PROTO: http X-HOST: 127.0.0.1'
1155 - Remove the next member from the client_state struct. Only the main
1156 thread needs access to all client states so give it its own struct.
1157 - Garbage-collect request_contains_null_bytes().
1158 - Ditch redundant code in unload_configfile().
1159 - Ditch LogGetURLUnderCursor() which doesn't seem to be used anywhere.
1160 - In write_socket(), remove the write-only variable write_len in
1161 an ifdef __OS2__ block. Spotted by cppcheck.
1162 - In connect_to(), don't declare the variable 'flags' on OS/2 where
1163 it isn't used. Spotted by cppcheck.
1164 - Limit the scope of various variables. Spotted by cppcheck.
1165 - In add_to_iob(), turn an interestingly looking for loop into a
1167 - Code cleanup in preparation for external filters.
1168 - In listen_loop(), mention the socket on which we accepted the
1169 connection, not just the source IP address.
1170 - In write_socket(), also log the socket we're writing to.
1171 - In log_error(), assert that escaped characters get logged
1172 completely or not at all.
1173 - In log_error(), assert that ival and sval have reasonable values.
1174 There's no reason not to abort() if they don't.
1175 - Remove an incorrect cgi_error_unknown() call in a
1176 cannot-happen-situation in send_crunch_response().
1177 - Clean up white-space in http_response definition and
1178 move the crunch_reason to the beginning.
1179 - Turn http_response.reason into an enum and rename it
1180 to http_response.crunch_reason.
1181 - Silence a 'gcc (Debian 4.3.2-1.1) 4.3.2' warning on i686 GNU/Linux.
1182 - Fix white-space in a log message in remove_chunked_transfer_coding().
1183 While at it, add a note that the message doesn't seem to
1184 be entirely correct and should be improved later on.
1186 - GNUmakefile improvements:
1187 - Use $(SSH) instead of ssh, so one only needs to specify a username once.
1188 - Removed references to the action feedback thingy that hasn't been
1190 - Consistently use shell.sourceforge.net instead of shell.sf.net so
1191 one doesn't need to check server fingerprints twice.
1192 - Removed GNUisms in the webserver and webactions targets so they
1193 work with standard tar.
1195 *** Version 3.0.16 Stable ***
1197 - Added the config file option handle-as-empty-doc-returns-ok to
1198 work around Firefox bug #492459, which causes Firefox to hang
1199 if JavaScripts are blocked in certain situations. The option is
1200 enabled in the default config file.
1201 - Added the config file option default-server-timeout to control the
1202 assumed default server timeout. Since Privoxy no longer returns
1203 an error message for connection resets on reused client connections,
1204 assuming larger server timeout values appears to actually work
1205 pretty well as long as connections aren't shared.
1206 - Added optional support for FreeBSD's accf_http(9). Use the
1207 configure option --enable-accept-filter to enable it.
1208 - Added fancier Privoxy icons for win32. Contributed by Jeff H.
1209 - In daemon mode, fd 0, 1 and 2 are bound to /dev/null.
1210 - Resolve localhost using whatever address family the operating
1211 system feels like. Previous betas would try to use IPv4 as this
1212 is what most users expect, but this didn't work reliably on
1214 - In the action lists on CGI pages, actions and their parameters are
1215 no longer separated with a space. The action file parser doesn't
1216 actually allow this and will throw an invalid syntax error if actions
1217 and parameters in the action files are separated. Not adding the
1218 spaces means copy and pasting CGI output into the action files works.
1219 - The default keep-alive timeout has been reduced to 5 seconds to work
1220 around hangs in clients that treat the proxy like any other host and
1221 stop allowing any new connections if the "maximum number of
1222 connections per host" is reached.
1223 - Several webbug URLs that look like they are leading to images are now
1224 blocked as image instead of empty documents. Doing the latter causes
1225 WebKit-based clients to show a "missing image" icon which may mess up
1227 - The no-such-domain template is used for DNS resolution
1228 problems with FEATURE_IPV6_SUPPORT enabled. Previously the
1229 connect-failed template was used. Reported by 'zebul666'.
1230 - Accepts quoted expiration dates even though RFC 2109 10.1.2
1231 doesn't seem to allow them. Reported anonymously.
1232 - Don't try to forget connections if connection sharing is disabled.
1233 This wasn't a real problem but caused an unnecessary log message.
1234 - The still undocumented --enable-extended-host-patterns configure
1235 option has a better description.
1236 - Fixed an error message that would claim a write to the server
1237 failed when actually writing to the client failed.
1238 - Log the crunch reason before trying to write to the client.
1239 The log is easier to read that way.
1240 - Several log messages about client connections also mention
1242 - handle-as-empty-document no longer depends on the image blocking
1244 - Privoxy-Log-Parser is roughly 40% faster in highlighting mode.
1245 - uagen, a Firefox User-Agent generator for Privoxy and Mozilla
1246 browsers has been imported and is available in the tarball's
1248 - The scripts in the tools directory treat unknown parameters
1251 *** Version 3.0.15 beta ***
1253 - In case of missing server data, no error message is send to the
1254 client if the request arrived on a reused connection. The client
1255 is then supposed to silently retry the request without bothering
1256 the user. This should significantly reduce the frequency of the
1257 "No server or forwarder data received" error message many users
1259 - More reliable detection of prematurely closed client sockets
1260 with keep-alive enabled.
1261 - FEATURE_CONNECTION_KEEP_ALIVE is decoupled from
1262 FEATURE_CONNECTION_SHARING and now available on
1264 - Improved handling of POST requests on reused connections.
1265 Should fix problems with stalled connections after submitting
1266 form data with some browser configurations.
1267 - Fixed various latency calculation issues.
1268 - Allows the client to pass NTLM authentication requests to a
1269 forwarding proxy. This was already assumed and hinted to work
1270 in 3.0.13 beta but actually didn't. Now it's confirmed to work
1271 with IE, Firefox and Chrome.
1272 Thanks to Francois Botha and Wan-Teh Chang
1273 - Fixed a calculation problem if receiving the server headers
1274 takes more than two reads, that could cause Privoxy to terminate
1275 the connection prematurely. Reported by Oliver.
1276 - Compiles again on platforms such as OpenBSD and systems
1277 using earlier glibc version that don't support AI_ADDRCONFIG.
1278 Anonymously submitted in #2872591.
1279 - A bunch of MS VC project files and Suse and Redhat RPM spec
1280 files have been removed as they were no longer maintained for
1282 - Overly long action lines are properly rejected with a proper
1283 error message. Previously they would be either rejected as
1284 invalid or cause a core dump through abort().
1285 - Already timed-out connections are no longer temporarily remembered.
1286 They weren't reused anyway, but wasted a socket slot.
1287 - len refers to the number of bytes actually read which might
1288 differ from the ones received. Adjust log messages accordingly.
1289 - The optional JavaScript on the CGI page uses encodeURIComponent()
1290 instead of escape() which doesn't encode all characters that matter.
1291 Anonymously reported in #2832722.
1292 - Fix gcc45 warnings in decompress_iob().
1293 - Various log message improvements.
1294 - Privoxy-Regression-Test supports redirect tests.
1295 - Privoxy-Log-Parser can gather some connection statistics.
1297 *** Version 3.0.14 beta ***
1299 - The latency is taken into account when evaluating whether or not to
1300 reuse a connection. This should significantly reduce the number of
1301 connections problems several users reported.
1302 - If the server doesn't specify how long the connection stays alive,
1303 Privoxy errs on the safe side of caution and assumes it's only a second.
1304 - The error pages for connection timeouts or missing server data use a
1305 Last-Modified date in the past. Retry attempts are detected and Privoxy
1306 removes the If-Modified-Since header to prevent the server from responding
1307 with status code 304 in which case the client would reuse the error message.
1308 - Setting keep-alive-timeout to 0 disables keep-alive support. Previously
1309 Privoxy would claim to allow persistence but not reuse the connection.
1310 - Pipelined requests are less likely to be mistaken for the request
1311 body of the previous request. Note that Privoxy still has no real
1312 pipeline support and will either serialize pipelined requests or
1313 drop them in which case the client has to resent them.
1314 - Fixed a crash on some Windows versions when header randomization
1315 is enabled and the date couldn't be parsed.
1316 - Privoxy's keep-alive timeout for the current connection is reduced
1317 to the one specified in the client's Keep-Alive header.
1318 - For HTTP/1.1 requests, Privoxy implies keep-alive support by not
1319 setting any Connection header instead of using 'Connection: keep-alive'.
1320 - If the socket isn't reusable, Privoxy doesn't temporarily waste
1321 a socket slot to remember the connection.
1322 - If keep-alive support is disabled but compiled in, the client's
1323 Keep-Alive header is removed.
1324 - Fixed a bug on mingw32 where downloading large files failed if
1325 keep-alive support was enabled.
1326 - Fixed a bug that (at least theoretically) could cause log
1327 timestamps to be occasionally off by about a second.
1328 - No Proxy-Connection header if added if there already is one.
1329 - The configure script respects the $PATH variable when searching
1332 *** Version 3.0.13 beta ***
1334 - Added IPv6 support. Thanks to Petr Pisar who not only provided
1335 the initial patch but also helped a lot with the integration.
1336 - Added client-side keep-alive support.
1337 - The connection sharing code is only used if the connection-sharing
1339 - The max-client-connections option has been added to restrict
1340 the number of client connections below a value enforced by
1341 the operating system.
1342 - Fixed a regression reintroduced in 3.0.12 that could cause
1343 crashes on mingw32 if header date randomization was enabled.
1344 - Compressed content with extra fields couldn't be decompressed
1345 and would get passed to the client unfiltered. This problem
1346 has only be detected through statical analysis with clang as
1347 nobody seems to be using extra fields anyway.
1348 - If the server resets the Connection after sending only the headers
1349 Privoxy forwards what it got to the client. Previously Privoxy
1350 would deliver an error message instead.
1351 - Error messages in case of connection timeouts use the right
1353 - If spawning a child to handle a request fails, the client
1354 gets an error message and Privoxy continues to listen for
1355 new requests right away.
1356 - The error messages in case of server-connection timeouts or
1357 prematurely closed server connections are now template-based.
1358 - If zlib support isn't compiled in, Privoxy no longer tries to
1359 filter compressed content unless explicitly asked to do so.
1360 - In case of connections that are denied based on ACL directives,
1361 the memory used for the client IP is no longer leaked.
1362 - Fixed another small memory leak if the client request times out
1363 while waiting for client headers other than the request line.
1364 - The client socket is kept open until the server socket has
1365 been marked as unused. This should increase the chances that
1366 the still-open connection will be reused for the client's next
1367 request to the same destination. Note that this only matters
1368 if connection-sharing is enabled.
1369 - A TODO list has been added to the source tarball to give potential
1370 volunteers a better idea of what the current goals are. Donations
1371 are still welcome too: http://www.privoxy.org/faq/general.html#DONATE
1373 *** Version 3.0.12 ***
1375 - The socket-timeout option now also works on platforms whose
1376 select() implementation modifies the timeout structure.
1377 Previously the timeout was triggered even if the connection
1378 didn't stall. Reported by cyberpatrol.
1379 - The Connection: keep-alive code properly deals with files
1380 larger than 2GB. Previously the connection was closed too
1382 - The content length for files above 2GB is logged correctly.
1383 - The user-manual directive on the show-status page links to
1384 the documentation location specified with the directive,
1385 not to the Privoxy website.
1386 - When running in daemon mode, Privoxy doesn't log anything
1387 to the console unless there are errors before the logfile
1389 - The show-status page prints warnings about invalid directives
1390 on the same line as the directives themselves.
1391 - Fixed several justified (but harmless) compiler warnings,
1392 mostly on 64 bit platforms.
1393 - The mingw32 version explicitly requests the default charset
1394 to prevent display problems with some fonts available on more
1395 recent Windows versions. Patch by Burberry.
1396 - The mingw32 version uses the Privoxy icon in the alt-tab
1397 windows. Patch by Burberry.
1398 - The timestamp and the thread id is omitted in the "Fatal error"
1399 message box on mingw32.
1400 - Fixed two related mingw32-only buffer overflows. Triggering
1401 them required control over the configuration file, therefore
1402 this isn't seen as a security issue.
1403 - In verbose mode, or if the new option --show-skipped-tests
1404 is used, Privoxy-Regression-Test logs skipped tests and the
1407 *** Version 3.0.11 ***
1409 - On most platforms, outgoing connections can be kept alive and
1410 reused if the server supports it. Whether or not this improves
1411 things depends on the connection.
1412 - When dropping privileges, membership in supplementary groups
1413 is given up as well. Not doing that can lead to Privoxy running
1414 with more rights than necessary and violates the principle of
1415 least privilege. Users of the --user option are advised to update.
1416 Thanks to Matthias Drochner for reporting the problem,
1417 providing the initial patch and testing the final version.
1418 - Passing invalid users or groups with the --user option
1419 didn't lead to program exit. Regression introduced in 3.0.7.
1420 - The match all section has been moved from default.action
1421 to a new file called match-all.action. As a result the
1422 default.action no longer needs to be touched by the user
1423 and can be safely overwritten by updates.
1424 - The standard.action file has been removed. Its content
1425 is now part of the default.action file.
1426 - In some situations the logged content length was slightly too low.
1427 - Crunched requests are logged with their own log level.
1428 If you used "debug 1" in the past, you'll probably want
1429 to additionally enable "debug 1024", otherwise only passed
1430 requests will be logged. If you only care about crunched
1431 requests, simply replace "debug 1" with "debug 1024".
1432 - The crunch reason has been moved to the beginning of the
1433 crunch message. For HTTP URLs, the protocol is logged as well.
1434 - Log messages are shortened by printing the thread id on its
1435 own (as opposed to putting it inside the string "Privoxy()").
1436 - The config option socket-timeout has been added to control
1437 the time Privoxy waits for data to arrive on a socket.
1438 - Support for remote toggling is controlled by the configure
1439 option --disable-toggle only. In previous versions it also
1440 depended on the action editor and thus configuring with the
1441 --disable-editor option would disable remote toggling support
1443 - Requests with invalid HTTP versions are rejected.
1444 - The template symbol @date@ can be used to include a date(1)-like
1445 time string. Initial patch submitted by Endre Szabo.
1446 - Responses from shoutcast servers are accepted again.
1447 Problem reported and fix suggested by Stefan.
1448 - The hide-forwarded-for-headers action has been replaced with
1449 the change-x-forwarded-for{} action which can also be used to
1450 add X-Forwarded-For headers. The latter functionality already
1451 existed in Privoxy versions prior to 3.0.7 but has been removed
1452 as it was often used unintentionally (by not using the
1453 hide-forwarded-for-headers action).
1454 - A "clear log" view option was added to the mingw32 version
1455 to clear out all of the lines in the Privoxy log window.
1456 Based on a patch submitted by T Ford.
1457 - The mingw32 version uses "critical sections" now, which prevents
1458 log message corruption under load. As a side effect, the
1459 "no thread-safe PRNG" warning could be removed as well.
1460 - The mingw32 version's task bar icon is crossed out and
1461 the color changed to gray if Privoxy is toggled off.
1463 *** Version 3.0.10 ***
1465 - Ordinary configuration file changes no longer cause program
1466 termination on OS/2 if the name of the logfile hasn't been
1467 changed as well. This regression probably crept in with the
1468 logging improvements in 3.0.7. Reported by Maynard.
1469 - The img-reorder filter is less likely to mess up JavaScript code in
1470 img tags. Problem and solution reported by Glenn Washburn in #2014552.
1471 - The source tar ball now includes Privoxy-Log-Parser,
1472 a syntax-highlighter for Privoxy logs. For fancy screenshots see:
1473 http://www.fabiankeil.de/sourcecode/privoxy-log-parser/
1474 Documentation is available through perldoc(1).
1476 *** Version 3.0.9 beta ***
1478 - Added SOCKS5 support (with address resolution done by
1479 the SOCKS5 server). Patch provided by Eric M. Hopper.
1480 - The "blocked" CGI pages include a block reason that was
1481 provided as argument to the last-applying block action.
1482 - If enable-edit-actions is disabled (the default since 3.0.7 beta)
1483 the show-status page hides the edit buttons and explains why.
1484 Previously the user would get the "this feature has been disabled"
1485 message after using the edit button.
1486 - Forbidden CONNECT requests are treated like blocks by default.
1487 The now-pointless treat-forbidden-connects-like-blocks action
1489 - Not enabling limit-connect now allows CONNECT requests to all ports.
1490 In previous versions it would only allow CONNECT requests to port 443.
1491 Use +limit-connect{443} if you think you need the old default behaviour.
1492 - The CGI editor gets turned off after three edit requests with invalid
1493 file modification timestamps. This makes life harder for attackers
1494 who can leverage browser bugs to send fake Referers and intend to
1495 brute-force edit URLs.
1496 - Action settings for multiple patterns in the same section are
1497 shared in memory. As a result these sections take up less space
1498 (and are loaded slightly faster). Problem reported by Franz Schwartau.
1499 - Linear white space in HTTP headers will be normalized to single
1500 spaces before parsing the header's content, headers split across
1501 multiple lines get merged first. This should prevent problems like:
1502 * letting the session-cookies-only action slip
1503 some Cookies through unmodified,
1504 * only suppressing the first line of a header,
1505 thus creating an invalid one, and
1506 * to incorrectly block headers with valid timestamps
1507 that weren't properly recognized.
1508 Headers that could trigger these problems are unlikely to appear
1509 in "normal" web traffic, but could be intentionally generated to
1510 fool some of Privoxy's header parsers.
1511 - Host information is gathered outside the main thread so it's less
1512 likely to delay other incoming connections if the host is misconfigured.
1513 - New config option "hostname" to use a hostname other than
1514 the one returned by the operating system. Useful to speed-up responses
1515 for CGI requests on misconfigured systems. Requested by Max Khon.
1516 - The CGI editor supports the "disable all filters of this type"
1517 directives "-client-header-filter", "-server-header-filter",
1518 "-client-header-tagger" and "-server-header-tagger".
1519 - Fixed false-positives with the link-by-url filter and URLs that
1520 contain the pattern "/jump/".
1521 - The less-download-windows filter no longer messes
1522 "Content-Type: application/x-shockwave-flash" headers up.
1523 - In the show-url-info page's "Final results" section active and
1524 inactive actions are listed separately. Patch provided by Lee.
1525 - The GNUmakefile supports the DESTDIR variable. Patch for
1526 the install target submitted by Radoslaw Zielinski.
1527 - Embedding the content of configuration files in the show-status
1528 page is significantly faster now. For a largish action file (1 MB)
1529 a speedup of about 2450 times has been measured. This is mostly
1530 interesting if you are using large action files or regularly use
1531 Privoxy-Regression-Test while running Privoxy through Valgrind,
1532 for stock configuration files it doesn't really matter.
1533 - If zlib support is unavailable and there are content
1534 filters active but the prevent-compression action is disabled,
1535 the show-url-info page includes a warning that compression
1536 might prevent filtering.
1537 - The show-url-info page provides an OpenSearch Description that
1538 allows to access the page through browser search plugins.
1539 - Custom client-header filters that rewrite the request line
1540 incorrectly no longer cause Privoxy to crash. Reported by din_a4.
1541 - The obsolete kill-popups action has been removed as the
1542 PCRS-based popup filters can do the same and are slightly
1544 - The inspect-jpegs action has been removed.
1545 - The send-wafer and send-vanilla-wafer actions have been removed.
1546 They weren't particular useful and their behaviour could be emulated
1547 with add-header anyway.
1548 - Privoxy-Regression-Test has been significantly improved.
1549 - Most sections in the default.action file contain tests for
1550 Privoxy-Regression-Test to verify that they are working as intended.
1551 - Parts of Privoxy have been refactored to increase maintainability.
1552 - Building with zlib (if available) is done by default.
1554 *** Version 3.0.8 ***
1556 - Fixed a small memory leak when listen-address only specifies the port.
1557 - The source tar balls now include Privoxy-Regression-Test which
1558 (upon other things) can be used to automatically detect some
1559 packaging problems. Packagers are welcome to give it a try.
1560 - Reverted a change in 3.0.7 that caused path patterns to be checked
1561 even if the host pattern match already failed. While this doesn't
1562 noticeable affect the performance, it makes it less likely to run
1563 out of stack space with overly-complex path patterns the user might
1565 - Updated the msn, yahoo and google filters to work as advertised again.
1566 - The warning message shown by the show-status CGI page is easier to
1567 understand. Previously it wasn't clear that the error message
1568 is shown below the invalid directive. (Reported by Lee)
1569 - When regenerating Content-Disposition headers the more common
1570 spelling is used for the name. Previously it was written without caps.
1571 - Less confusing log message if the content type isn't overwritten
1572 because force-text-type wasn't used but the old type doesn't look
1573 like content that would be filtered normally.
1574 - Better log messages if the user tries to execute filters that
1576 - Treat the non-standard Request-Range headers like standard range
1577 headers and suppress them if content filtering is enabled.
1578 - Prevent the log messages for CONNECT requests to unacceptable
1579 ports from printing the limit-connect argument as [null] if
1580 limit-connect hasn't been explicitly enabled.
1581 - Don't disable the mingw32 log window if the logfile directive
1582 isn't used. While it was an intentional change in 3.0.7 at least
1583 one user perceived it as a regression and the same effect can
1584 be achieved by disabling all debug directives.
1585 - Fixed two minor problems related to the win32 build process: a css
1586 file was not being in the installer and the trustfile comment in the
1587 config.txt referenced a nonexisting file
1588 - Minor documentation fixes.
1590 *** Version 3.0.7 beta ***
1592 - Added zlib support to filter content with gzip and deflate
1593 encoding. (Patch provided by Wil Mahan)
1594 - Dedicated filters and actions are used for header filtering.
1595 "filter-client-headers" and "filter-client-headers" are no longer
1596 supported, use server-header-filter{} and client-header-filter{}
1598 - Tags can be used to change actions based on HTTP headers.
1599 - New server-header filter: less-download-windows.
1600 - New client-header taggers: css-requests, image-requests,
1601 client-ip-address, http-method, allow-post, complete-url,
1602 user-agent and privoxy-control.
1603 - New server-header taggers: content-type and privoxy-control.
1604 - The forward-override{} action allows to change the forwarding
1605 settings through the action files, for example based on client
1606 headers like the User-Agent, or the request origin.
1607 - Socks errors are no longer handled by the CGI page for
1608 DNS resolution failures.
1609 - CGI pages use favicons to signal whether they are error
1610 or control pages. This is useful if you rely heavily on
1612 - The show-url-info CGI page shows the forwarding settings.
1613 - "Crunch!" log messages (used when Privoxy answers requests
1614 by itself) now also contain the reason.
1615 - Allow to rewrite the request destination behind the client's back.
1616 - Fix socks requests on big-endian platforms. Patch provided by Song Weijia.
1617 - Fixes possible deadlocks and crashes on OpenBSD.
1618 Patch provided by Ralf Horstmann.
1619 - The CGI action editor allows to edit actionfiles with previously
1620 forbidden characters like dots.
1621 - New trust entries are saved with a comment that contains the
1622 trusted referring URL (Suggested by Daniel Griscom).
1623 - Filter descriptions are HTML encoded automatically.
1624 - New config option "split-large-forms" to work
1625 around a browser bug that caused IE6 and IE7 to ignore
1626 the Submit button on the edit-actions-for-url CGI page.
1627 - New config option "allow-cgi-request-crunching" to allow
1628 requests for Privoxy's CGI pages to be blocked, redirected
1629 or (un)trusted like ordinary requests.
1630 - Empty filter files no longer interrupt the filtering process
1631 prematurely and are correctly listed on the show-status CGI page.
1632 - New config option "accept-intercepted-requests" to combine
1633 Privoxy with any packet filter to build an intercepting proxy
1634 for HTTP/1.1 requests (and for HTTP/1.0 requests with Host header set).
1635 - fast-redirects{} catch redirects to https URLs as well.
1636 - redirect{s@foo@bar@} can be used to redirect to a rewritten
1637 version of the original URL.
1638 - Trap unsupported gopher proxy requests.
1639 - Fixed a bug in the User Manual delivery on Windows
1640 (mingw32 only). Images now show up correctly and HTML
1641 pages are no longer padded with garbage data.
1642 - Fixed several minor memory leaks, most of them discovered with Valgrind.
1643 - Only unlink the pidfile if it's actually used.
1644 - Retries after connection problems with forced requests
1645 aren't blocked again.
1646 - On Unix SIGABRT causes a core dump as expected and is no
1647 longer treated as normal shutdown signal.
1648 - The "access denied" CGI page is more descriptive and
1649 allows retries to circumvent the referrer check.
1650 - Updated PCRS to handle unexpected PCRE errors properly.
1651 Fixed crashes that could occur if Privoxy was build
1652 with external PCRE versions newer than Privoxy's internal
1653 one. (Reported by Chung-chieh Shan)
1654 - Fixed crashes with null bytes in PCRS replacement strings
1655 (Patch provided by Felix Gröbert).
1656 - Fixed crashes with header time randomization on mingw32.
1657 - The CGI style sheet is no longer delivered if the referring
1658 page isn't a Privoxy CGI page. This prevents a JavaScript-based
1659 Privoxy detection "attack". Note that detecting Privoxy is
1660 still possible through other ways and Privoxy was never intended
1661 to be invisible anyway.
1662 - Added support for AmigaOS 4, fixed build for AmigaOS 3.x.
1663 - The show-url-info CGI page displays a warning if Privoxy
1664 is currently toggled off.
1665 - The show-status CGI page suppresses the edit button
1666 for action files if Privoxy has no write access.
1667 - Most CGI error pages react properly to HEAD requests.
1668 - Requests with RFC 3253 HTTP methods (used by Subversion)
1669 are accepted. (Patch provided by Petr Kadlec)
1670 - New config option "templdir" to change the location
1671 of the CGI templates to make sure customized templates
1673 - Better handling of "HTTP/1.1 100 Continue" responses.
1674 - The background of the PNG pattern is transparent.
1675 - Fixed XML syntax errors caused by banners-by-size and banners-by-url.
1676 - Fixed crashes and possible action file corruptions
1677 when lines containing hashes are written through the CGI editor.
1678 - Supports dynamic filters which can contain variables.
1679 - Supports tags to change the actions based on client or server headers.
1680 - Incorrect actions are logged before program termination.
1681 - The "actionsfile" syntax in the configuration file is consistent
1682 with the rest of the configuration options and requires the
1683 whole file name. This is an incompatible change, if you use
1684 an old configuration file you might have to append ".action"
1685 to your "actionsfile" directives.
1686 - With the configuration file option "enforce-blocks" the
1687 "go there anyway" mechanism can be disabled without recompiling
1689 - More precise error messages in case of incorrect acl syntax.
1690 - Logs a warning if filtering is enabled but impossible due
1691 to lack of zlib support or use of the prevent-compression action.
1692 - Less noisy handling of Cookie:" and "Connection:" headers.
1693 - Improved error messages in case of connection problems.
1694 - Fix a command-line-parsing bug that was introduced before 3.0.5
1695 beta and caused Privoxy to treat the last argument as configuration
1696 file if no configuration file was specified.
1697 - Treat unknown command line options as fatal errors instead
1698 of silently ignoring them.
1699 - Use string functions with length checks more often.
1700 - Don't log CONNECT requests twice.
1701 - Allow to log the source address for ACL-related connection drops.
1702 - Don't ignore applying filters if the server didn't
1703 specify a Content-Type. Bug reported by Amuro Namie.
1704 - Rejected CONNECT requests are logged with log level info
1705 (enabled by default) and the reason for the block.
1706 - New command line option "--pre-chroot-nslookup hostname" to
1707 intialize the resolver library before chroot'ing. On some systems this
1708 reduces the number of files that must be copied into the chroot tree.
1709 (Patch provided by Stephen Gildea)
1710 - Fix a long-standing memory corruption bug that could cause
1711 Privoxy to overwrite a single byte in memory it didn't explicitly
1712 allocate (but that probably was allocated anyway due to bucket size).
1713 - Send template-based CGI pages as HTTP/1.1 unless the client
1715 - Let the first line in connection established responses
1716 end in \r\n as required by RFC1945. Reported by Bert van Leeuwen.
1717 - If no log file has been specified, disable logging instead of logging
1719 - Don't block stderr when in daemon mode.
1720 - Ignore missing zero-chunks when filtering chunk-encoded content.
1721 Earlier Privoxy versions would buffer and then forward the content
1722 unmodified which caused some browsers to simply show empty pages.
1723 - Fix double free in cgi_edit_actions_list(). Reported by Venustech AD-LAB.
1724 - The code to add X-Forwarded-For headers when the hide-forwarded-for-headers
1725 action isn't being used has been removed.
1726 - Fixed trustfile feature which previously didn't work without FEATURE_TOGGLE.
1728 - Minor code clean-ups, filter and action file updates.
1729 (Some of them reported by Davide Alberani, Markus Elfring,
1730 Stefan Huehner and Adam Piggott)
1732 *** Version 3.0.6 ***
1734 - New content filters: no-ping, google, msn, yahoo and blogspot.
1735 - New header filters: x-httpd-php-to-html, html-to-xml, xml-to-html
1736 and hide-tor-exit-notation.
1737 - The special header "X-Filter: No" now disables header filtering as well.
1738 - Improved the filters img-reorder, js-annoyances, webbugs,
1739 banners-by-size, banners-by-link and ie-exploits to make them
1740 less likely to break anything.
1741 - Removed outdated URL patterns in default.action and added new ones.
1742 - Added redirection from http://p.p/user-manual to http://p.p/user-manual/
1743 - Changed webinterface default values for hide-user-agent, hide-referrer
1744 and set-image-blocker.
1746 *** Version 3.0.5 beta ***
1748 - Windows version can be installed/started as a service.
1749 - Windows icon stays blue when Privoxy is idle, green when busy.
1750 - Integrated Fabian Keil's extensive patch. See:
1751 http://www.fabiankeil.de/sourcecode/privoxy/. Includes the
1752 following new or significantly improved actions (among many
1753 other improvements):
1755 content-type-overwrite{}
1756 crunch-client-header{string}
1757 crunch-if-none-match
1758 crunch-server-header{string}
1759 fast-redirects{check-decoded-url}
1760 filter-client-headers
1761 filter-server-headers
1763 handle-as-empty-document
1764 hide-accept-language{}
1765 hide-content-disposition{}
1766 hide-if-modified-since
1767 hide-referrer{conditional-block}
1768 overwrite-last-modified{}
1770 treat-forbidden-connects-like-blocks
1772 - Standard-compliant clients are prevented from displaying cached
1773 copies of Privoxy's error messages after the cause of the problem
1775 - Improved DNS error handling.
1776 - Multiple filter files can now be specified in config.
1777 - Added jpeg filtering to defend against MS jpeg vulnerability MS04-028
1778 with the new inspect-jpegs action.
1779 - Removed the "arbitrary" 1000 filter limit - addresses tracker #911950
1780 - Thanks to Jindrich Makovicka for a race condition fix for the log
1781 file. The race condition remains for non-pthread implementations.
1782 Reference patch #1175720. Various other logging enhancements.
1783 - A pile of assorted bug fixes, memory leaks, enhancements, etc.
1784 - Moved Actions file reporting mechanism to SF tracker.
1785 - Two new options for config: enable-remote-http-toggle and
1786 forwarded-connect-retries.
1787 - Trap unsupported FTP requests.
1788 - Let text/xml be filtered.
1789 - Numerous updates to default.action
1790 - Increase the compiled in limit of trusted referrers from 64 to 512
1791 (for trustfile users).
1793 *** Version 3.0.3 ***
1795 - Fixed yet another two memory leaks. Process growth seems stopped now.
1796 - Further tightened security against malicious toggle-off links.
1797 - Excluded text/plain MIME types from filtering. This fixes a
1798 couple of client-crashing, download corruption and
1799 Privoxy performance issues, whose root cause lies in
1800 web servers labelling content of unknown type as text/plain.
1801 - Assorted fixes for POSIX compliance, signal handling, graceful
1802 termination, compiler warnings, OSX support, Win32 systray,
1803 error logging, hostname wildcards, correct detection of NetBSD.
1804 - Workarounds for client (iTunes etc) and server (PHP < 4.2.3) bugs
1805 including the notorious "blank page" problem.
1806 - Various filter improvements; most notably the unsolicited-popups
1807 filter became less destructive
1808 - Major revamp of the actions file
1810 *** Version 3.0.2 ***
1812 - Fixed two memory leaks, one serious
1813 - Fixed bug in pcrs which could cause crashes with user-defined filters
1814 - Fixed bug in domain name matching
1815 - Assorted small fixes (Win32 menu, CGI URL editor, ..)
1816 - Added basic support for the OPTIONS and TRACE http methods
1817 - Added workaround for Bug in Mac OSX that made Privoxy crash occasionally
1818 - Refined the default action file through >400 items of user feedback
1820 - Assorted refinements, optimizations and fixes in the js-annoyances,
1821 img-reorder, banners-by-size, banners-by-link, webbugs, refresh-tags,
1822 html-annoyances, content-cookies and fun filters
1823 - Replaced filter "popups" by choice between two modes:
1824 - "unsolicited-popups" tries to catch only the unsolicited ones
1825 - "all-popups" tries to kill them all (as before)
1826 - New filter "tiny-textforms" Help those tiny or hard-wrap textareas.
1827 - New filter "jumping-windows" that prevents windows from resizing
1828 and moving themselves
1829 - New filter "demoronizer" which fixes MS's abuse of std charsets
1830 (common cases anyway).
1831 - Replaced "nimda" with more general "ie-exploits" filter in which
1832 all filters for exploits shall be collected
1833 - Improved cookie logging
1834 - Rewrote make install target. Added uninstall and install-strip
1836 - Fixed a potential (application-level, NOT OS-level!) security
1837 problem involving remote toggling and action file manipulation
1838 by mailicious websites.
1839 - Added ability to chroot (thanks to Sviatoslav Sviridov)
1840 - Added more action aliases for prehistoric action names
1841 - Add Slackware support to Makefile.
1845 - Fixed Windows startmenu items, log window and tray icon menus.
1846 - Added warning for bogus install target
1847 - Added quicktime-kioskmode filter and improved frameset-borders
1848 - Updated default.action based on latest feedback
1849 - New PDF doc build process
1850 - Add a user contrib module to cvs:
1851 http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/ijbswa/contrib/
1853 *** Version 2.9.18 ***
1855 - Added workaround for IE bug that broke CGI interface
1856 - Bugfix: String actions now reliably editable through CGI interface
1857 - Three filters fixed (again!)
1858 - Assorted small fixes and doc enhancements
1860 *** Version 2.9.16 ***
1862 - Major revamp of default.action to get rid of years of cruft.
1863 - Same for default.filter
1864 - Re-design and major improvements to the CGI editor interface.
1865 - Address spurious 'out of memory' error due to incorrect file permissions.
1866 - Impose buffer limits while reading client and server headers.
1867 - Better memory and CPU optimization.
1868 - Add Conectiva Linux package.
1869 - user-manual directive added to config for help links from within CGI
1871 - Multiple actions files can now be specified in config.
1872 - Actions files are changed to: default.action, standard.action, and
1873 user.action. user.action is for personal/local configuration.
1874 - The usual many small and miscellaneous bug and security fixes.
1876 *** Version 2.9.14 beta ***
1878 - Fix Solaris compile problem (gateway.h and filters.h)
1879 - Makefile fixes for Solaris, FreeBSD (?)
1880 - Fix build failure where certain features were disabled.
1881 - 'blocked-compact' template is removed. Various CGI improvements,
1882 including an adaptive 'blocked' template.
1883 - Various tweaks for actions file to get ready for stable 3.0
1884 - Included a 'Bookmarklet' and PHP scripts for reporting actions file
1885 problems via web interface at privoxy.org. Accessed via internal CGIs.
1886 - Include cgi-style.css for templates.
1887 - #include mechansim for common text in templates
1888 - Various other minor fixes.
1890 *** Version 2.9.13 beta ***
1892 - *NEWS*: The project has been renamed to Privoxy! The new name is
1893 reflected throughout (file locations, etc).
1894 - ijb.action is now default.action. re_filterfile is now
1896 - http://i.j.b/ is now http://p.p/
1897 - The 'logo' option for replacing ad iamges is removed now. 'Pattern'
1898 (checkerboard) is now the default.
1899 - RPM spec file make over.
1902 *** Version 2.9.12 beta ***
1904 - **READ**: The default listening PORT is NOW 8118!!! Changed from
1905 8000 due to conflict with NAS (Network Audio Server, whatever that
1907 - More CGI actions editor fixes and improvements.
1908 - Win32 command line fix ups.
1909 - re_filterfile now has modular sections that can be activated on a
1910 per site basis. Some new goodies there too.
1911 - +filter now takes arguments to match FILTER sections in re_filterfile
1912 for even more flexibility.
1913 - Added a new image blocker option: +image-blocker{pattern}, which
1914 displays a checkerboard patthern and scales better than the logo.
1915 - PNG images will be used in place of GIF for JB built-in images
1916 if configured with --enable-no-gif.
1917 - Clean up compiler warnings (mostly).
1918 - Improved handling of failed DNS lookups & diagnostics for failed bind
1920 - Made --no-daemon mode log to tty instead of logfile.
1921 - Various spec file and init script cleanups and improvements (Redhat and
1923 - CGI Editor works on OS/2 now.
1924 - Fix restart failure where sockets were in TIME_WAIT.
1925 - Fixes for actions cgi editor, make sure we have right file.
1926 - A --pidfile command line option now, in addition to --help,
1927 --version, --no-daemon, --user and configfile. --no-daemon replaces
1928 the former -d option and _DEBUG define. --user will drop privileges
1929 to the specified user.
1930 - Signal handling cleanups (*nix).
1931 - CGI actions editor improvements and fixes.
1932 - Error handling improvements, especially out of memory.
1933 - Default re_filterfile fix that caused spurious IJB logos
1934 (instead of 'blank').
1935 - configure.in threading fixes for Solaris.
1936 - Various other minor fixes.
1939 *** Version 2.9.11 beta Changes ***
1941 - Add "session" cookie concept where cookies exist for the life
1942 of that browser session only (ie never goes to disk).
1943 - Checks for correct header length.
1944 - Fix user:pass@host.domain.com auth bug.
1945 - Better signal handling on *nix.
1946 - Fix CFLAGS hard-coded in configure.in
1947 - Fix threading bug re: gethostbyname() that caused random
1948 URLs to fail in some cases.
1951 *** Version 2.9.11 Alpha Changes ***
1953 - A web-based editor for the actions file is included (go to http://i.j.b/).
1954 - Web-based toggle IJB on/off support.
1955 - Cookie handling has changed - the new +no-cookies-keep feature is now the
1957 - actionsfile is renamed to ijb.action.
1958 - junkbstr.txt is now config.txt on Win32.
1959 - Support for running IJB as a UNIX daemon process has improved.
1960 - Unix daemon now returns error code on failed start.
1961 - Timestamps in logfile and jarfile now.
1962 - Fix for the Netscape bug reintroduced in 2.9.9.
1963 - make should now abort if gmake (GNU make) not present.
1964 - Many other minor bugfixes
1965 - Start a ChangeLog :)
1969 *** Version 2.9.3 pre-Alpha Changes ***
1971 - Amiga support (completely untested by me - I don't have an Amiga)
1972 - "tinygif 3" support (redirects blocked images to a specified URL, so
1973 the browser doesn't have to load and cache many copies of the same
1975 - one case where there were both local and global "referrer" variables
1976 (yuck!) clarified by renaming the local one to "refer".
1977 - Fixed some places where close() was used instead of close_socket().
1978 Thanks to Jörg Strohmayer (joergs at users.sourceforge.net) for these.
1979 - Temporary hack to get FORCE_LOAD to work with IE. I just lowercased the
1980 FORCE_LOAD_PREFIX. Needs fixing properly.
1981 - Most URLs hardcoded into Junkbuster were changed to go through a script
1982 e.g. http://ijbswa.sourceforge.net/redirect.php?v=2.9.3&to=faq
1983 The only other URLs left are the GNU GPL:
1984 http://www.fsf.org/copyleft/gpl.html
1986 http://ijbswa.sourceforge.net/
1987 ... and various URLs which will be intercepted by Junkbuster anyway.
1988 TODO: Still need to do something with the URLs in Junkbuster Corp's
1989 copyright/trademark notice on the bottom of the show-proxy-args page.
1990 - PCRE or GNU Regex is now a #define option.
1993 *** Version 2.9.2 pre-Alpha Changes ***
1995 - Andreas applied the latest version of the FORCE patch.
1998 *** Version 2.9.1 pre-Alpha Changes ***
2000 - in parsers.c, fixed two #ifdef FORCE to #ifdef FORCE_LOAD
2001 (BTW: I think FORCE is precise enough, since loading remote
2002 data is the whole purpose of a proxy..)
2003 - Set the FORCE_PREFIX (back) to 'IJB-FORCE-LOAD-'. While 'noijb.'
2004 is more elegant and looks like a hostname in the URL, it doesn't
2005 make clear to the inexperienced user that the proxy is bypassed. It
2006 also has a higher name collision risk.
2007 - Filled in the function header templates for my functions in
2008 parsers.c (again). They obviously got lost in our current
2010 - Cut the credit for the §-referrer-option from the config file,
2011 that Stefan had placed there.
2012 - Improved the re_filterfile
2015 *** Version 2.9.0 pre-Alpha Changes ***
2017 - Now use PCRE, not GNU REGEX. I have not yet had chance to check the
2018 syntax of the block/image/cookie file to ensure that they match what
2019 is expected - however they seem to work.
2020 - Replaced "configure" script with one generated by "autoconf". Also
2021 use a header "config.h" (was ijbconfig.h in my previous release) for
2022 the #defines. "config.h" is now generated with "autoheader" from
2023 "acconfig.h" and "configure.in". (Note that to install you do not
2024 need autoconf or autoheader - just run "./configure".)
2025 To see command-line options, run "./configure --help".
2026 This is my first ever autoconf script, so it has some rough edges
2027 (how PCRE is handled is the roughest).
2028 - Error logging code replaced with new module errlog.c, based on the
2029 one from JunkbusterMT (but with the threading code removed).
2030 - Most of Rodney's 0.21 and 0.21A patches applied. (Marked *). I did not
2031 apply all of these, since I had already independently done conditional
2032 popup file, conditional image file, and integration of popup code.
2033 - ACL, Jar and trust files conditionally compiled.
2034 - New source file headers.
2035 - Various cosmetic changes. (But I have not consistently ordered the
2036 config files - I think that's worthwhile, but it's 1am and I want to
2038 - RCS tags on .h files.
2039 - RCS tags are const char[] rather than const char *. (Saves 4 bytes
2041 - VC++ project files renamed to vc_junkbuster.*.
2042 - show-proxy-args now shows status of all conditionals, not just REGEX
2043 - Various functions moved around. Most notably all the system-specific
2044 sockets code which was spread between jcc.c, bind.c, and connect.c,
2045 has been moved to "jbsockets.c". The non-system-specific code from
2046 connect.c and socks4.c has been movet to "gateway.c". Also, the
2047 config file loader and the global variables it writes to have been
2048 moved to "loadcfg.c". (Maybe this should go into loaders.c?)
2049 And candidate for the "worst filename ever" award is "miscutil.c",
2050 which contains, well, miscellaneous utility functions like zalloc.
2051 (Suggestions for a better name for this file are welcome!)
2052 - Loaders now use a common function to read a line and skip comments,
2053 and this function also stores the proxy_args.
2054 - Added ./junkbuster --help (Not for Win32 GUI)
2055 - Added ./junkbuster --version (Not for Win32 GUI)
2056 - Win32 resources are now all marked as "U.S. English", rather than
2057 being a mix of "U.S. English", "U.K. English" and "Irish English".
2058 - Version number changes to 2.9.0
2061 ----------------------------------------------------------------------
2062 Copyright : Written by and Copyright (C) 2001-2016 the
2063 Privoxy team. https://www.privoxy.org/
2065 Based on the Internet Junkbuster originally written
2066 by and Copyright (C) 1997 Anonymous Coders and
2067 Junkbusters Corporation. http://www.junkbusters.com/
2069 This program is free software; you can redistribute it
2070 and/or modify it under the terms of the GNU General
2071 Public License as published by the Free Software
2072 Foundation; either version 2 of the License, or (at
2073 your option) any later version.
2075 This program is distributed in the hope that it will
2076 be useful, but WITHOUT ANY WARRANTY; without even the
2077 implied warranty of MERCHANTABILITY or FITNESS FOR A
2078 PARTICULAR PURPOSE. See the GNU General Public
2079 License for more details.
2081 The GNU General Public License should be included with
2082 this file. If not, you can view it at
2083 http://www.gnu.org/copyleft/gpl.html
2084 or write to the Free Software Foundation, Inc., 59
2085 Temple Place - Suite 330, Boston, MA 02111-1307, USA.