+# socks_proxy and http_parent can be a numerical IPv6 address
+# (if RFC 3493 is implemented). To prevent clashes with the port
+# delimiter, the whole IP address has to be put into brackets.
+# On the other hand a target_pattern containing an IPv6 address
+# has to be put into angle brackets (normal brackets are
+# reserved for regular expressions already).
+#
+# If http_parent is ".", then requests are not forwarded to
+# another HTTP proxy but are made (HTTP-wise) directly to the
+# web servers, albeit through a SOCKS proxy.
+#
+# Examples:
+#
+# From the company example.com, direct connections are made to
+# all "internal" domains, but everything outbound goes through
+# their ISP's proxy by way of example.com's corporate SOCKS 4A
+# gateway to the Internet.
+#
+# forward-socks4a / socks-gw.example.com:1080 www-cache.isp.example.net:8080
+# forward .example.com .
+#
+# A rule that uses a SOCKS 4 gateway for all destinations but no
+# HTTP parent looks like this:
+#
+# forward-socks4 / socks-gw.example.com:1080 .
+#
+# To connect SOCKS5 proxy which requires username/password
+# authentication:
+#
+# forward-socks5 / user:pass@socks-gw.example.com:1080 .
+#
+# To chain Privoxy and Tor, both running on the same system, you
+# would use something like:
+#
+# forward-socks5t / 127.0.0.1:9050 .
+#
+# Note that if you got Tor through one of the bundles, you may
+# have to change the port from 9050 to 9150 (or even another
+# one). For details, please check the documentation on the Tor
+# website.
+#
+# The public Tor network can't be used to reach your local
+# network, if you need to access local servers you therefore
+# might want to make some exceptions:
+#
+# forward 192.168.*.*/ .
+# forward 10.*.*.*/ .
+# forward 127.*.*.*/ .
+#
+# Unencrypted connections to systems in these address ranges
+# will be as (un)secure as the local network is, but the
+# alternative is that you can't reach the local network through
+# Privoxy at all. Of course this may actually be desired and
+# there is no reason to make these exceptions if you aren't sure
+# you need them.
+#
+# If you also want to be able to reach servers in your local
+# network by using their names, you will need additional
+# exceptions that look like this:
+#
+# forward localhost/ .
+#
+#
+# 5.3. forwarded-connect-retries
+# ===============================
+#
+# Specifies:
+#
+# How often Privoxy retries if a forwarded connection request
+# fails.
+#
+# Type of value:
+#
+# Number of retries.
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# Connections forwarded through other proxies are treated like
+# direct connections and no retry attempts are made.
+#
+# Notes:
+#
+# forwarded-connect-retries is mainly interesting for socks4a
+# connections, where Privoxy can't detect why the connections
+# failed. The connection might have failed because of a DNS
+# timeout in which case a retry makes sense, but it might also
+# have failed because the server doesn't exist or isn't
+# reachable. In this case the retry will just delay the
+# appearance of Privoxy's error message.
+#
+# Note that in the context of this option, "forwarded
+# connections" includes all connections that Privoxy forwards
+# through other proxies. This option is not limited to the HTTP
+# CONNECT method.
+#
+# Only use this option, if you are getting lots of
+# forwarding-related error messages that go away when you try
+# again manually. Start with a small value and check Privoxy's
+# logfile from time to time, to see how many retries are usually
+# needed.
+#
+# Example:
+#
+# forwarded-connect-retries 1
+#
+forwarded-connect-retries 0
+#
+# 6. MISCELLANEOUS
+# =================
+#
+# 6.1. accept-intercepted-requests
+# =================================
+#
+# Specifies:
+#
+# Whether intercepted requests should be treated as valid.
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# Only proxy requests are accepted, intercepted requests are
+# treated as invalid.
+#
+# Notes:
+#
+# If you don't trust your clients and want to force them to use
+# Privoxy, enable this option and configure your packet filter
+# to redirect outgoing HTTP connections into Privoxy.
+#
+# Note that intercepting encrypted connections (HTTPS) isn't
+# supported.
+#
+# Make sure that Privoxy's own requests aren't redirected as
+# well. Additionally take care that Privoxy can't intentionally
+# connect to itself, otherwise you could run into redirection
+# loops if Privoxy's listening port is reachable by the outside
+# or an attacker has access to the pages you visit.
+#
+# If you are running Privoxy as intercepting proxy without being
+# able to intercept all client requests you may want to adjust
+# the CGI templates to make sure they don't reference content
+# from config.privoxy.org.
+#
+# Example:
+#
+# accept-intercepted-requests 1
+#
+accept-intercepted-requests 0
+#
+# 6.2. allow-cgi-request-crunching
+# =================================
+#
+# Specifies:
+#
+# Whether requests to Privoxy's CGI pages can be blocked or
+# redirected.
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# Privoxy ignores block and redirect actions for its CGI pages.
+#
+# Notes:
+#
+# By default Privoxy ignores block or redirect actions for its
+# CGI pages. Intercepting these requests can be useful in
+# multi-user setups to implement fine-grained access control,
+# but it can also render the complete web interface useless and
+# make debugging problems painful if done without care.
+#
+# Don't enable this option unless you're sure that you really
+# need it.
+#
+# Example:
+#
+# allow-cgi-request-crunching 1
+#
+allow-cgi-request-crunching 0
+#
+# 6.3. split-large-forms
+# =======================
+#
+# Specifies:
+#
+# Whether the CGI interface should stay compatible with broken
+# HTTP clients.
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# The CGI form generate long GET URLs.
+#
+# Notes:
+#
+# Privoxy's CGI forms can lead to rather long URLs. This isn't a
+# problem as far as the HTTP standard is concerned, but it can
+# confuse clients with arbitrary URL length limitations.
+#
+# Enabling split-large-forms causes Privoxy to divide big forms
+# into smaller ones to keep the URL length down. It makes
+# editing a lot less convenient and you can no longer submit all
+# changes at once, but at least it works around this browser
+# bug.
+#
+# If you don't notice any editing problems, there is no reason
+# to enable this option, but if one of the submit buttons
+# appears to be broken, you should give it a try.
+#
+# Example:
+#
+# split-large-forms 1
+#
+split-large-forms 0
+#
+# 6.4. keep-alive-timeout
+# ========================
+#
+# Specifies:
+#
+# Number of seconds after which an open connection will no
+# longer be reused.
+#
+# Type of value:
+#
+# Time in seconds.
+#
+# Default value:
+#
+# None
+#
+# Effect if unset:
+#
+# Connections are not kept alive.
+#
+# Notes:
+#
+# This option allows clients to keep the connection to Privoxy
+# alive. If the server supports it, Privoxy will keep the
+# connection to the server alive as well. Under certain
+# circumstances this may result in speed-ups.
+#
+# By default, Privoxy will close the connection to the server if
+# the client connection gets closed, or if the specified timeout
+# has been reached without a new request coming in. This
+# behaviour can be changed with the connection-sharing option.
+#
+# This option has no effect if Privoxy has been compiled without
+# keep-alive support.
+#
+# Note that a timeout of five seconds as used in the default
+# configuration file significantly decreases the number of
+# connections that will be reused. The value is used because
+# some browsers limit the number of connections they open to a
+# single host and apply the same limit to proxies. This can
+# result in a single website "grabbing" all the connections the
+# browser allows, which means connections to other websites
+# can't be opened until the connections currently in use time
+# out.
+#
+# Several users have reported this as a Privoxy bug, so the
+# default value has been reduced. Consider increasing it to 300
+# seconds or even more if you think your browser can handle it.
+# If your browser appears to be hanging, it probably can't.
+#
+# Example:
+#
+# keep-alive-timeout 300
+#
+keep-alive-timeout 5
+#
+# 6.5. tolerate-pipelining
+# =========================
+#
+# Specifies:
+#
+# Whether or not pipelined requests should be served.
+#
+# Type of value:
+#
+# 0 or 1.
+#
+# Default value:
+#
+# None
+#
+# Effect if unset:
+#
+# If Privoxy receives more than one request at once, it
+# terminates the client connection after serving the first one.
+#
+# Notes:
+#
+# Privoxy currently doesn't pipeline outgoing requests, thus
+# allowing pipelining on the client connection is not guaranteed
+# to improve the performance.
+#
+# By default Privoxy tries to discourage clients from pipelining
+# by discarding aggressively pipelined requests, which forces
+# the client to resend them through a new connection.
+#
+# This option lets Privoxy tolerate pipelining. Whether or not
+# that improves performance mainly depends on the client
+# configuration.
+#
+# If you are seeing problems with pages not properly loading,
+# disabling this option could work around the problem.
+#
+# Example:
+#
+# tolerate-pipelining 1
+#
+tolerate-pipelining 1
+#
+# 6.6. default-server-timeout
+# ============================
+#
+# Specifies:
+#
+# Assumed server-side keep-alive timeout if not specified by the
+# server.
+#
+# Type of value:
+#
+# Time in seconds.
+#
+# Default value:
+#
+# None
+#
+# Effect if unset:
+#
+# Connections for which the server didn't specify the keep-alive
+# timeout are not reused.
+#
+# Notes:
+#
+# Enabling this option significantly increases the number of
+# connections that are reused, provided the keep-alive-timeout
+# option is also enabled.
+#
+# While it also increases the number of connections problems
+# when Privoxy tries to reuse a connection that already has been
+# closed on the server side, or is closed while Privoxy is
+# trying to reuse it, this should only be a problem if it
+# happens for the first request sent by the client. If it
+# happens for requests on reused client connections, Privoxy
+# will simply close the connection and the client is supposed to
+# retry the request without bothering the user.
+#
+# Enabling this option is therefore only recommended if the
+# connection-sharing option is disabled.
+#
+# It is an error to specify a value larger than the
+# keep-alive-timeout value.
+#
+# This option has no effect if Privoxy has been compiled without
+# keep-alive support.
+#
+# Example:
+#
+# default-server-timeout 60
+#
+#default-server-timeout 5
+#
+# 6.7. connection-sharing
+# ========================
+#
+# Specifies:
+#
+# Whether or not outgoing connections that have been kept alive
+# should be shared between different incoming connections.
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# None
+#
+# Effect if unset:
+#
+# Connections are not shared.
+#
+# Notes:
+#
+# This option has no effect if Privoxy has been compiled without
+# keep-alive support, or if it's disabled.
+#
+# Notes:
+#
+# Note that reusing connections doesn't necessary cause
+# speedups. There are also a few privacy implications you should
+# be aware of.
+#
+# If this option is enabled, outgoing connections are shared
+# between clients (if there are more than one) and closing the
+# browser that initiated the outgoing connection does not affect
+# the connection between Privoxy and the server unless the
+# client's request hasn't been completed yet.
+#
+# If the outgoing connection is idle, it will not be closed
+# until either Privoxy's or the server's timeout is reached.
+# While it's open, the server knows that the system running
+# Privoxy is still there.
+#
+# If there are more than one client (maybe even belonging to
+# multiple users), they will be able to reuse each others
+# connections. This is potentially dangerous in case of
+# authentication schemes like NTLM where only the connection is
+# authenticated, instead of requiring authentication for each
+# request.
+#
+# If there is only a single client, and if said client can keep
+# connections alive on its own, enabling this option has next to
+# no effect. If the client doesn't support connection
+# keep-alive, enabling this option may make sense as it allows
+# Privoxy to keep outgoing connections alive even if the client
+# itself doesn't support it.
+#
+# You should also be aware that enabling this option increases
+# the likelihood of getting the "No server or forwarder data"
+# error message, especially if you are using a slow connection