# Note: GNUmakefile is built automatically from GNUmakefile.in # # Written by and Copyright (C) 2001-2018 members of the # Privoxy team. https://www.privoxy.org/ # # Based on the Internet Junkbuster originally written # by and Copyright (C) 1997 Anonymous Coders and # Junkbusters Corporation. http://www.junkbusters.com # # This program is free software; you can redistribute it # and/or modify it under the terms of the GNU General # Public License as published by the Free Software # Foundation; either version 2 of the License, or (at # your option) any later version. # # This program is distributed in the hope that it will # be useful, but WITHOUT ANY WARRANTY; without even the # implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. See the GNU General Public # License for more details. # # The GNU General Public License should be included with # this file. If not, you can view it at # http://www.gnu.org/copyleft/gpl.html # or write to the Free Software Foundation, Inc., 59 # Temple Place - Suite 330, Boston, MA 02111-1307, USA. # ############################################################################# # Set make command correctly ############################################################################# @SET_MAKE@ ############################################################################# # Version number (for RPM) ############################################################################# VERSION_MAJOR = @VERSION_MAJOR@ VERSION_MINOR = @VERSION_MINOR@ VERSION_POINT = @VERSION_POINT@ CODE_STATUS = @CODE_STATUS@ VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT) SNAPVERSION = $(VERSION)-$(shell date "+%Y%m%d") SOURCE_DATE_EPOCH = @SOURCE_DATE_EPOCH@ MTREE_SPEC_FILE = privoxy-$(VERSION)-$(CODE_STATUS).spec ############################################################################# # "make install" directories and variables ############################################################################# #User Group paras USER = @USER@ GROUP = @GROUP@ datarootdir = @datarootdir@ prefix = @prefix@ exec_prefix = @exec_prefix@ CONF_BASE = @sysconfdir@ SBIN_DEST = @sbindir@ MAN_DIR = @mandir@ MAN_DEST = $(MAN_DIR)/man1 MAN_PAGE = privoxy.1 SHARE_DEST = @datadir@ DOC_DEST = $(SHARE_DEST)/doc/privoxy VAR_DEST = @localstatedir@ LOGS_DEST = $(VAR_DEST)/log/privoxy PIDS_DEST = $(VAR_DEST)/run # if $prefix = /usr/local then the default CONFDEST change from # CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy # by the target rule CONF_DEST # # also if the $prefix is /usr/local and there is no # $(SHARE_DEST)/doc, it checks for $prefix/doc and installs there # instead in this situation # # finally if $prefix=/usr/local and VAR_DEST=$prefix/var it # changes this to /var for storing the logs and pidfile # used in source dir only, the install goes to $share_dest/doc/privoxy DOK_WEB = doc/webserver/ # Install usage should be compatible with install-sh. INSTALL = @INSTALL@ # Binaries BIN_MODE = 0755 # Support files, docs, etc. RA_MODE = 0644 # Directory DIR_MODE = 0755 # Files daemon writes to. RWD_MODE = 0660 INSTALL_P = -m $(BIN_MODE) INSTALL_T = -m $(RA_MODE) INSTALL_D = -m $(DIR_MODE) -d INSTALL_R = -m $(RWD_MODE) # install options for superuser install #INSTALL_S = -g @GROUP@ -o @USER@ ############################################################################# # Build tools ############################################################################# PROGRAM = privoxy@EXEEXT@ CC = @CC@ ECHO = echo GZIP_PROG = gzip # id -u is not universal. FIXME: need to set from configure. Breaks on # Solaris. #ID = id -u ID = id LD = @CC@ RM = rm -f CP = cp -f RMDIR = rmdir MKDIR = ./mkinstalldirs STRIP_PROG = strip SED = sed GREP = grep CAT = cat MV = mv TAR = tar LN = ln TOUCH = touch KILL = kill CHMOD = chmod CHOWN = chown CHGRP = chgrp GROUPS = groups W3M_DUMP = @W3M@ -I ISO-8859 -O ASCII -dump W3M_DUMP_UTF8 = @W3M@ -I ISO-8859 -O UTF-8 -dump # docbook output is ISO-8859 (which is a superset of ascii) JADECAT = @JADECAT@ JADEBIN = @JADEBIN@ NSGMLS = @NSGMLS@ DB = $(JADEBIN) $(JADECAT) -ihtml -t sgml -D.. -d ldp.dsl\#html DB_TXT = $(JADEBIN) $(JADECAT) -ihtml -t sgml -D.. -d ldp.dsl\#print # -d dsssl_spec # This specifies that dsssl_spec is the system identifier of the DSSSL specification to be used. # ldp.dsl#html : keep '&char;' strings as is # ldp.dsl#print : convert '&char;' strings to ISO-8859 equivalent # NOTE: '-d ldp.dsl\#whatever' _MUST_ be last and _MUST NOT_ have # a trailing space so that '$(DB)-notoc' or '$(DB_TXT)-notoc' # pulls in the correct dsl stylesheet DB2HTML = @DB2HTML@ MAN2HTML = @MAN2HTML@ G2H_CMD = groff -mandoc -Thtml TARGET_OS = @host@ PERL = perl DOC_DIR = doc/source DOC_TMP = $(DOC_DIR)/tmp DOC_STATUS = @DOC_STATUS@ TIDY = tidy -latin1 -q -modify -indent -wrap 120 --tidy-mark no --preserve-entities yes \ --mute MISSING_ATTRIBUTE --mute TRIM_EMPTY_ELEMENT # -latin1 # use ISO-8859-1 for both input and output # docbook output is ISO-8859 and tidy assumes UTF-8 # -q # suppress nonessential output # -modify # modify the original input file # --mute MISSING_ATTRIBUTE # don't show lacks "alt" attribute # or lacks "summary" attribute # --mute TRIM_EMPTY_ELEMENT # don't show trimming empty

# RSYNC = rsync -av -c --chmod=D755,F644 # Program to do LF->CRLF DOSFILTER = $(PERL) -p -e 's/\n/\r\n/' CVSROOT = :pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa #TMPDIR := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX) # If your SF user name differs from your local one, # change this to "ssh -l sf-username" SSH = ssh WWW_ROOT = /home/project-web/ijbswa # SourceForge login name used by the 'sf-shell' target (optional) SOURCE_FORGE_NAME = '' ############################################################################# # Setup for make distribution for now. ############################################################################# TAR_ARCH = /tmp/privoxy-$(VERSION).tar.gz GEN_DIST_TAR_NAME = privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS).tar ############################################################################# # We include these files in our distributions ############################################################################# CONFIGS = config trust default.action match-all.action \ user.action default.filter user.filter \ regression-tests.action # take care that no CVS .cvsignore or other crappy files # are included here # and escape every '#' in the find. doh. CONFIG_FILES = $(CONFIGS) \ `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS" | sort` DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \ `find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html" | sort` \ `find doc/webserver/ -name "*.css" | sort` \ $(MAN_PAGE) ############################################################################# # Filenames and libraries ############################################################################# C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \ errlog.c filters.c gateway.c jbsockets.c jcc.c \ list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \ urlmatch.c C_OBJS = $(C_SRC:.c=.@OBJEXT@) C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h CLIENT_TAG_SRC = @FEATURE_CLIENT_TAGS_ONLY@client-tags.c CLIENT_TAG_OBJS = @FEATURE_CLIENT_TAGS_ONLY@client-tags.@OBJEXT@ FUZZ_SRC = @FUZZ_ONLY@fuzz.c FUZZ_OBJS = @FUZZ_ONLY@fuzz.@OBJEXT@ W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c w32svrapi.c W32_FILES = @WIN_ONLY@w32.res W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES) W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h w32svrapi.h W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32 W32_INIS = @WIN_ONLY@config.txt trust.txt SSL_SRC = @FEATURE_HTTPS_INSPECTION_ONLY@ssl.c SSL_OBJS = @FEATURE_HTTPS_INSPECTION_ONLY@$(SSL_SRC:.c=.o) SSL_HDRS = @FEATURE_HTTPS_INSPECTION_ONLY@$(SSL_SRC:.c=.h) project.h PCRS_SRC = @STATIC_PCRS_ONLY@pcrs.c PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@) PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h) PCRE_SRC = @STATIC_PCRE_ONLY@pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:.c=.@OBJEXT@) PCRE_HDRS = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h # No REGEX (maybe because dynamically linked pcreposix): REGEX_SRC = @STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c REGEX_OBJS = $(REGEX_SRC:.c=.@OBJEXT@) REGEX_HDRS = $(REGEX_SRC:.c=.h) # Dependencies introduced by #include "project.h". PROJECT_H_DEPS = project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@pcre/pcre.h # Socket libraries for platforms that need them explicitly defined SOCKET_LIB = @SOCKET_LIB@ # PThreads library, if needed. PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@ SRCS = $(C_SRC) $(CLIENT_TAG_SRC) $(FUZZ_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC) $(SSL_SRC) OBJS = $(C_OBJS) $(CLIENT_TAG_OBJS) $(FUZZ_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS) $(SSL_OBJS) HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS) $(SSL_HDRS) LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB) ############################################################################# # Compiler switches ############################################################################# # The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build. # The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a # Win32 GUI build. # The flag "-pthread" is required if using Pthreads under Linux (and # possibly other OSs). SPECIAL_CFLAGS = @SPECIAL_CFLAGS@ # Add your flags here OTHER_CFLAGS = CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \ -Imbedtls/include \ @STATIC_PCRE_ONLY@ -Ipcre LDFLAGS = @LDFLAGS@ $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS) ############################################################################# # Build section. # # There should NOT be any targets above this line. ############################################################################# all: $(PROGRAM) default.action ############################################################################# # Phony targets ############################################################################# .PHONY: all inifiles \ win-dist tarball-dist dok webserver clean clobber tags \ install CONF_DEST LOG_DEST \ PID_DEST check_doc install-strip uninstall GROUP_T ############################################################################# # Define this explicitly because Solaris is broken! ############################################################################# %.o: %.c $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@ ############################################################################# # Strip master copy comments from default.action: ############################################################################# default.action: default.action.master $(GREP) -v '^#MASTER#' default.action.master > $@ ############################################################################# # Win32 config files ############################################################################# inifiles: $(W32_INIS) config.txt: config $(SED) -e 's!\trustfile trust!trustfile trust.txt!' \ -e 's!\logfile logfile!logfile privoxy.log!' \ -e 's!#Win32-only: !!' \ < $< | \ $(DOSFILTER) > $@ # LF to CRLF in default.action $(DOSFILTER) default.action.txt && mv default.action.txt default.action # LF to CRLF in default.filter $(DOSFILTER) default.filter.txt && mv default.filter.txt default.filter trust.txt: trust $(DOSFILTER) < $< > $@ ############################################################################# # Pre-dist check: ############################################################################# dist-check: @if [ -d CVS ]; then \ $(ECHO) "***************************************************"; \ $(ECHO) "*** ***"; \ $(ECHO) "*** WARNING ***"; \ $(ECHO) "*** ***"; \ $(ECHO) "*** The presence of a CVS subdirectory suggests ***"; \ $(ECHO) "*** that you are trying to build a distribution ***"; \ $(ECHO) "*** package based on a checked out, not an ***"; \ $(ECHO) "*** exported copy of the source tree. Please ***"; \ $(ECHO) "*** see \"Releasing a new version\" in the ***"; \ $(ECHO) "*** developer manual. ***"; \ $(ECHO) "*** ***"; \ $(ECHO) "***************************************************"; \ $(ECHO) "Type \"yes i am sure\" if you are sure that you"; \ $(ECHO) -n "really want to proceed: "; \ read answer; \ if [ "$$answer" != "yes i am sure" ]; then exit 1; fi \ fi; ############################################################################# # create tar.gz from CVS: # This make-target is usually called through 'create-archive'. If you # run 'make create-snapshot' without setting SNAPVERSION, you'll get a # tar.gz with the current date in the name. # The main usage is to run it as follows (Red Hat example): # make SNAPVERSION=1.6x create-snapshot # This creates a tar.gz. ############################################################################# create-snapshot: @tag=`cvs -d $(CVSROOT) status Makefile | awk ' /Sticky Tag/ { print $$3 } '` 2> /dev/null; \ [ x"$$tag" = x"(none)" ] && tag=HEAD; \ echo "*** Creating package from $$tag!"; \ TMPDIR=$(shell mktemp -d /tmp/$(PROGRAM).XXXXXX); \ cd $$TMPDIR ; cvs -Q -d $(CVSROOT) export -r $$tag current || echo "Um... export aborted."; \ cd $$TMPDIR/current; \ $(TAR) --exclude ".cvsignore" --exclude "CVS" \ -czf /tmp/$(PROGRAM)-$(VERSION).tar.gz .; \ $(RM) -rf $$TMPDIR @echo "Resulting file is /tmp/$(PROGRAM)-$(VERSION).tar.gz" ############################################################################# # looks at the version of Makefile and exports a corresponding source-tree # example: if the Makefile has the sticky tag v_2_9_13, you'll get # privoxy-*-2.4.13.tar.gz. ############################################################################# create-archive: make SNAPVERSION=$(SNAPVERSION) create-snapshot ############################################################################# # generic distribution ############################################################################# gen-dist: dist-check @$(ECHO) "" @$(ECHO) "You have run autoconf && autoheader && ./configure right?" @$(ECHO) "" $(MAKE) $(PROGRAM) $(STRIP_PROG) $(PROGRAM) $(LN) -s `pwd` ../privoxy-$(VERSION)-$(CODE_STATUS) # add program (cd .. && $(TAR) --exclude "PACKAGERS" -cvhf $(GEN_DIST_TAR_NAME) privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM)) # add config files for foo in $(CONFIG_FILES); do \ (cd .. && $(TAR) --exclude "PACKAGERS" -uvhf $(GEN_DIST_TAR_NAME) privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ done; # add documentation for foo in $(DOC_FILES); do \ (cd .. && $(TAR) --exclude "PACKAGERS" -uvhf $(GEN_DIST_TAR_NAME) privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ done; # add tools (cd .. && $(TAR) -uvhf $(GEN_DIST_TAR_NAME) privoxy-$(VERSION)-$(CODE_STATUS)/tools) # and zip the archive $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS) $(GZIP_PROG) ../$(GEN_DIST_TAR_NAME) @$(ECHO) Distribution with binary created. # anonymously ncftps the package to sourceforge gen-upload: ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../$(GEN_DIST_TAR_NAME).gz @$(ECHO) ------------------------------------------------------- @$(ECHO) Now goto @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118 @$(ECHO) ... and release the files. @$(ECHO) ------------------------------------------------------- # use with care gen-clean: $(RM) ../$(GEN_DIST_TAR_NAME)* ############################################################################# # Tarball distribution: No CVS dirs, dotfiles, debian build dir, # (FIXME:) only parts of the static / generated docs mix in doc/webserver ############################################################################# tarball-dist: dist-check clean clobber $(LN) -s `pwd` ../privoxy-$(VERSION)-$(CODE_STATUS) for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \ -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o \ -name "PACKAGERS" -o -path "*.git/*" \) | sort`; do \ files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \ done && \ cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \ # and zip the archive $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS) $(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar @$(ECHO) Tarball distribution created. # Create a mtree spec file that can be used to get a reproducible tar ball mtree-spec: $(LN) -s `pwd` ../privoxy-$(VERSION)-$(CODE_STATUS) $(ECHO) "#mtree 2.0" > $(MTREE_SPEC_FILE) for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \ -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o \ -name "PACKAGERS" -o -path "*.git/*" -o -name "*.spec" \) | env -i sort`; do \ $(ECHO) "privoxy-$(VERSION)-$(CODE_STATUS)/$$i time=$(SOURCE_DATE_EPOCH) type=file uname=privoxy gname=privoxy mode=0555"; \ done >> $(MTREE_SPEC_FILE) $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS) # Create a reproducible tarball. # Requires a tar implementation with mtree support. reproducible-tarball-dist: dist-check clean clobber mtree-spec $(LN) -s `pwd` ../privoxy-$(VERSION)-$(CODE_STATUS) $(TAR) cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar -C .. @privoxy-$(VERSION)-$(CODE_STATUS)/$(MTREE_SPEC_FILE) $(GZIP_PROG) -n privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS) $(MTREE_SPEC_FILE) @$(ECHO) Reproducible tarball distribution created. # anonymously ncftps the tarball to sourceforge tarball-upload: ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz @$(ECHO) ------------------------------------------------------- @$(ECHO) Now goto @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118 @$(ECHO) ... and release the files. @$(ECHO) ------------------------------------------------------- tarball-clean: $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz ############################################################################# # # Documentation # # converts doc/source/*.sgml into html and man pages # ############################################################################# # developer manual dok-devel: $(RM) doc/webserver/developer-manual/*.html $(RM) -r doc/source/developer-manual mkdir -p doc/source/developer-manual cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/ # user manual dok-user: $(RM) doc/webserver/user-manual/*.html $(RM) -r doc/source/user-manual/ mkdir -p doc/source/user-manual cd doc/source/user-manual && $(DB) -iuser-man ../user-manual.sgml && cd .. && cp user-manual/*.html ../webserver/user-manual/ # FIXME: temp fix so same stylesheet gets in more than one place so it works # for all doc set-ups, including the 'user manual' config option in local # system where it MUST be in same directory as html. $(PERL) -pi.bak -e 's/<\/head/\n\n<\/head/i' doc/webserver/user-manual/*html && \ rm doc/webserver/user-manual/*html.bak # faq dok-faq: $(RM) doc/webserver/faq/*.html $(RM) -r doc/source/faq mkdir -p doc/source/faq cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/ # man page, one variation. Try to use the next target, just 'make man'. dok-man: $(RM) doc/man/* doc/webserver/man-page/*.html echo MAN2HTML is $(MAN2HTML) @if [ $(MAN2HTML) != "false" ]; then \ $(ECHO) "Privoxy Man page

NAME

" > doc/webserver/man-page/privoxy-man-page.html; \ man ./$(MAN_PAGE) | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html; \ $(ECHO) "" >> doc/webserver/man-page/privoxy-man-page.html; \ else \ $(MAKE) groff2html; \ fi; # Build man page from sgml. This requires the SGMLSpm perl module. # See CPAN, or your favorite perl repository. This is the preferred # target for man page generation! man: dok-release mkdir -p doc/source/temp && cd doc/source/temp && $(RM) * ;\ $(NSGMLS) ../privoxy-man-page.sgml | sgmlspl ../../../utils/docbook2man/docbook2man-spec.pl &&\ perl -pi.bak -e 's/ //; s/\[ /\[/g' $(MAN_PAGE) ;\ perl -pi.bak -e "s/\[ /\[/g;s/á/\\\\['a]/g;s/é/\\\\['e]/g" $(MAN_PAGE); \ perl -pi.bak -e "s/ö/\\\\[:o]/g" $(MAN_PAGE); \ perl -pi.bak -e 's/([ {])-([a-z])/$$1\\-$$2/g' $(MAN_PAGE); \ perl -pi.bak -e 's/ --([a-z])/ \\-\\-$$1/g' $(MAN_PAGE); \ perl -pi.bak -e 's/\\fB--/\\fB\\-\\-/g' $(MAN_PAGE); \ $(DB) ../privoxy-man-page.sgml && $(MV) -f $(MAN_PAGE) ../../../$(MAN_PAGE) # For those with man2html ala RH7s. man2html: mkdir -p doc/webserver/man-page @if [ $(MAN2HTML) != "false" ]; then \ $(MAN2HTML) $(MAN_PAGE) |grep -v "^Content-type" > tmp.html; \ $(PERL) -pi.bak -e 's///; s//man2html/' tmp.html; \ $(PERL) -pi.bak -e 's/(<\/HEAD>)/<\/HEAD>/' tmp.html; \ $(PERL) -pi.bak -e 's/()/$$1$$2/g' tmp.html; \ $(PERL) -pi.bak -e 's,\.">,">,g' tmp.html; \ $(PERL) -pi.bak -e "s/\['a\]/\á/g;s/\['e\]/\é/g" tmp.html; \ $(SED) -e 's///g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.*; \ else \ $(MAKE) groff2html; \ fi; # Otherwise we get plain groff conversion. groff2html: $(G2H_CMD) ./$(MAN_PAGE) | $(SED) -e 's@@@' > doc/webserver/man-page/privoxy-man-page.html # readme page and INSTALL file dok-readme: dok-release cd doc/source && $(DB_TXT)-notoc -V nochunks readme.sgml > tmp.html &&\ $(W3M_DUMP) tmp.html > ../../README ;\ $(DB_TXT)-notoc -V nochunks install.sgml > tmp.html &&\ $(W3M_DUMP) tmp.html > ../../INSTALL ;\ $(RM) tmp.* # index.sgml is used to create both the Home Page, and a local index # for documentation, etc. # # index.html for webserver: dok-webserver: cd doc/source/webserver && $(DB)-notoc -ip-homepage -V nochunks index.sgml > ../../webserver/index.html $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\ s/<\/HEAD/\n<\/HEAD/;\ s/\.\d\. //;\ s/__copy/©/;\ s@(\1@; s@( ../../webserver/privoxy-index.html $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\ s/<\/HEAD/\n<\/HEAD/;\ s/\.\d\. //;\ s/__copy/©/' \ doc/webserver/privoxy-index.html && $(RM) doc/webserver/*.bak # Main documentation target. dok: dok-release dok-devel dok-user dok-faq dok-readme dok-webserver dok-authors dok-index @$(ECHO) Documentation created. ## Make AUTHORS file dok-authors: cd doc/source && $(DB_TXT) -V nochunks authors.sgml > tmp.html && \ $(W3M_DUMP_UTF8) tmp.html > ../../AUTHORS && $(RM) tmp.html # Set doc entities for VERSION and CODE_STATUS in sgml docs. Toggle content # exceptions accordingly. This needs to go before any doc building (doh). dok-release: @$(ECHO) Setting doc version and status to $(VERSION), $(CODE_STATUS) @$(PERL) -pi.bak -e 's///;\ s///' \ doc/source/*sgml doc/source/*/*sgml $(RM) -r doc/source/*bak doc/source/*/*bak @if [ $(CODE_STATUS) = "stable" ]; then \ $(ECHO) Setting docs to stable $(VERSION); \ $(PERL) -pi.bak -e 's///;\ s///' \ doc/source/*sgml doc/source/*/*sgml; \ else \ $(ECHO) Setting docs to not stable $(VERSION); \ $(PERL) -pi.bak -e 's///; \ s///' \ doc/source/*sgml doc/source/*/*sgml; \ fi; $(RM) -r doc/source/*bak doc/source/*/*bak; # The main Privoxy config file, generated from sgml sources. # NOTE: This will require some hand editing. config-file: dok-release generate-config-file $(RM) config.bak config.html @$(ECHO) "****************************************************" @$(ECHO) "The config file has been optimistically updated" @$(ECHO) "Now -- you may need to hand edit the results!" @$(ECHO) "In particular, check the Debug levels, the" @$(ECHO) "permit-access, forward & socks examples and the" @$(ECHO) "various user-manual examples, which all" @$(ECHO) "might have gotten hammered." @$(ECHO) "****************************************************" generate-config-file: cd doc/source && $(DB_TXT)-notoc -iconfig-file -V nochunks config.sgml > ../../config.html $(W3M_DUMP) -cols 67 config.html > config $(PERL) -i.bak utils/prepare-configfile.pl config ############################################################################# # # Webserver # # moves documentation to webserver # ############################################################################# sf-shell: @sf_name=$(SOURCE_FORGE_NAME); \ [ -n "$${sf_name}" ] || read -p "Enter SourceForge username: " sf_name || exit 1; \ echo "Opening shell for $${sf_name} ..."; \ ssh -t $${sf_name},ijbswa@shell.sourceforge.net create webserver: clean-editor-files @$(ECHO) ------------------------------------------------------- @$(ECHO) You will need to "create" a SF shell first: @$(ECHO) ssh -t SF-USER-ID,ijbswa@shell.sourceforge.net create @$(ECHO) Please make sure your documentation files are up to date. @$(ECHO) Note that this command updates the home page and copys @$(ECHO) all stuff to the webserver, it will not remove obsolete documents. @$(ECHO) Note that a botched upload can result in the documentation @$(ECHO) on the website becoming unreachable! Also the CSS files @$(ECHO) currently seem to end up at the wrong place. @$(ECHO) ------------------------------------------------------- @$(ECHO) Replacing the user-manual symlink @$(SSH) shell.sourceforge.net "cd $(WWW_ROOT)/htdocs && rm user-manual \ && mkdir -p $(VERSION)/user-manual && ln -s $(VERSION)/user-manual user-manual" @$(ECHO) Uploading html @cd doc/webserver; \ upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \ $(TAR) cf - $$upload | $(SSH) shell.sourceforge.net 'cd $(WWW_ROOT)/htdocs/; tar xvm 2>&1 | grep -v timestamp' web-actions: @$(ECHO) Updating the actions on the webserver ... @$(RSYNC) doc/webserver/actions/*.php shell.sourceforge.net:$(WWW_ROOT)/htdocs/actions web-homepage: @$(ECHO) "Updating the home page (index.html) only (be careful in case of version changes) ..." @$(RSYNC) doc/webserver/index.html shell.sourceforge.net:$(WWW_ROOT)/htdocs/ web-faq: @$(ECHO) Updating the FAQ on the webserver ... @$(RSYNC) doc/webserver/faq/*.html shell.sourceforge.net:$(WWW_ROOT)/htdocs/faq web-sponsors: @$(ECHO) "Updating the sponsor page (index.html) only ..." @$(RSYNC) doc/webserver/sponsors/index.html shell.sourceforge.net:$(WWW_ROOT)/htdocs/sponsors/ web-user-manual: @$(ECHO) Updating the user manual on the webserver (do not use in case of version changes) ... @$(RSYNC) doc/webserver/user-manual/*.html shell.sourceforge.net:$(WWW_ROOT)/htdocs/user-manual/ ############################################################################# # # Try to clean up the generated HTML files. # # The files are such a mess that some of them require two tidy runs in a # row as the first one aborts prematurely. The vanilla tidy output renders # poorly because it contains a bit too much whitespace, so we additionally # run the files through perl to fix this again. # ############################################################################# dok-tidy: for html_file in `find doc/webserver -name "*.html"`; do \ $(ECHO) "------ begin processing $$html_file" >&2 ; \ $(TIDY) $$html_file || $(TIDY) $$html_file; \ $(PERL) -i'' -e 's@^\s*
\s*$$@@; s@ +$$@@;' -n -p $$html_file; \ done ############################################################################# # Source file dependencies ############################################################################# actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h filters.h jcc.h list.h loaders.h miscutil.h actionlist.h ssplit.h cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h jbsockets.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actionlist.h actions.h errlog.h miscutil.h cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h urlmatch.h deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS) encode.@OBJEXT@: encode.c encode.h config.h errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h urlmatch.h @WIN_ONLY@win32.h gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h w32svrapi.h cgi.h list.@OBJEXT@: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h loaders.@OBJEXT@: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h miscutil.@OBJEXT@: miscutil.c miscutil.h config.h parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h ssplit.@OBJEXT@: ssplit.c ssplit.h config.h miscutil.h urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h client-tags.@OBJEXT@: client-tags.c client-tags.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h fuzz.@OBJEXT@: fuzz.c config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h ssl.@OBJEXT@: ssl.c ssl.h config.h $(PROJECT_H_DEPS) encode.h errlog.h jcc.h miscutil.h # GNU regex gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h # PCRS pcrs.@OBJEXT@: pcrs.c pcrs.h config.h @STATIC_PCRE_ONLY@pcre/pcre.h # PCRE pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c pcre/pcreposix.@OBJEXT@: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h pcre/study.@OBJEXT@: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h # An auxiliary program makes the PCRE default character table source pcre/chartables.c: pcre/dftables@EXEEXT@ pcre/dftables@EXEEXT@ >pcre/chartables.c pcre/dftables@EXEEXT@: pcre/dftables.c pcre/maketables.c pcre/pcre.h pcre/internal.h pcre/config.h $(CC) -o pcre/dftables@EXEEXT@ $(CFLAGS) pcre/dftables.c # Win32 w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h w32svrapi.h w32.res: w32.rc w32res.h icons/radar-01.ico icons/radar-02.ico icons/radar-03.ico icons/radar-04.ico icons/radar-05.ico icons/radar-06.ico icons/radar-07.ico icons/radar-08.ico icons/idle.ico icons/privoxy.ico config.h windres -F pe-i386 -D__MINGW32__=0.2 -O coff -i $< -o $@ $(PROGRAM): $(OBJS) $(W32_FILES) $(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS) clean: $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) default.action \ config.base config.tmp \ `find . \( -name TAGS -o -name tags \) -a -not -path "./.git/*"` \ `find . -name "*.orig" -a -not -name rc.privoxy.orig -a -not -path "./.git/*"` clean-editor-files: $(RM) `find . -name "*~"` $(RM) `find . -name "#*#"` # Emacs backup files $(RM) `find . -name ".\#*"` clobber: clean-editor-files $(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \ privoxy.log core *.tar.gz *.tar privoxy-cl.spec doc/source/ldp.dsl config.new $(RM) -r autom4te.cache # # FIXME: What is all this? # $(RM) cscope.* *.pdb *.lib *.exp distclean: clobber tags: $(SRCS) $(HDRS) etags $(SRCS) $(HDRS) CONF_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(CONF_BASE)" = "$(prefix)/etc" ];then \ $(ECHO) "$(CONF_BASE)/privoxy";\ else\ $(ECHO) "$(CONF_BASE)";\ fi) LOG_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(LOGS_DEST)" = "$(prefix)/var/log/privoxy" ];then \ $(ECHO) "/var/log/privoxy" ;\ else\ $(ECHO) "$(LOGS_DEST)";\ fi) PID_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(PIDS_DEST)" = "$(prefix)/var/run" ];then \ $(ECHO) "/var/run" ;\ else\ $(ECHO) "$(PIDS_DEST)";\ fi) check_doc:=$(shell if [ ! -d "$(SHARE_DEST)/doc" ] && [ "$(prefix)" = "/usr/local" ] && [ -d "$(prefix)/doc" ];then \ $(ECHO) "1";\ else\ $(ECHO) "0";\ fi) # If USER is specified but no GROUP, assume there is a GROUP of same name. GROUP_T:=$(shell if [ x$(GROUP) = x ] && [ x$(USER) != x ];then \ $(ECHO) "$(USER)" ;\ else\ $(ECHO) "$(GROUP)";\ fi) install-strip: $(MAKE) install STRIP=-s # FIXME: Test USER and GROUP on Slack to make sure this works as # intended. # # FIXME: id handling needs help, probably via configure, since 'id -u' is not # universally reliable (eg Solaris). Group handling could be better. # Perhaps the whole user/group validation should be done here, and simplified. PROGRAM_V = Privoxy $(VERSION) $(CODE_STATUS) install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T @# Quick test for valid USER. @if [ -n "$(USER)" ]; then \ $(ID) $(USER) >/dev/null || exit 1;\ fi @# Test for valid group. FIXME. USER does not have to belong to GROUP @# for file ownership purposes. # if [ -n "$(GROUP_T)" ] && [ -n "$(USER)" ] && ! $(GROUPS) $(USER) | $(GREP) "\<$(GROUP_T)\>" >/dev/null; then \ # $(ECHO) Group $(GROUP_T) for User $(USER) is invalid && exit 1 ;\ # fi @$(ECHO) "Creating directories, and preparing $(PROGRAM_V) installation" $(CHMOD) $(DIR_MODE) $(MKDIR) @$(MKDIR) $(DESTDIR)$(SBIN_DEST) $(DESTDIR)$(prefix) $(DESTDIR)$(CONF_DEST) \ $(DESTDIR)$(CONF_DEST)/templates $(DESTDIR)$(SHARE_DEST) \ $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(PID_DEST) @# Install the executable binary, strip if invoked as install-strip @test -n "$(STRIP)" &&\ $(ECHO) Installing $(PROGRAM) stripped executable to $(SBIN_DEST) ||\ $(ECHO) Installing $(PROGRAM) executable to $(DESTDIR)$(SBIN_DEST) $(INSTALL) $(INSTALL_P) $(STRIP) $(PROGRAM) $(DESTDIR)$(SBIN_DEST) @# Install the DOCS and man page. install-sh only does one file at a time. @# FIXME: only handles jpegs. -@if [ $(check_doc) = 0 ]; then \ DOC=$(DOC_DEST) ;\ else \ DOC=$(prefix)/doc/privoxy ;\ fi;\ $(MKDIR) $(DESTDIR)$$DOC $(DESTDIR)$$DOC/user-manual $(DESTDIR)$$DOC/faq $(DESTDIR)$$DOC/developer-manual \ $(DESTDIR)$$DOC/man-page $(DESTDIR)$$DOC/images $(DESTDIR)$(MAN_DEST) ;\ if [ -d "$(DOK_WEB)" ]; then \ $(ECHO) Installing FAQ, Manual, and other docs to $(DESTDIR)$$DOC;\ for i in user-manual developer-manual faq; do \ for ii in $(DOK_WEB)/$$i/*html; do \ $(INSTALL) $(INSTALL_T) $$ii $(DESTDIR)$$DOC/$$i;\ done ;\ done ;\ for i in $(DOK_WEB)/user-manual/*jpg; do \ $(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$$DOC/user-manual;\ done ;\ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/man-page/*html $(DESTDIR)$$DOC/man-page;\ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/privoxy-index.html $(DESTDIR)$$DOC/index.html;\ $(INSTALL) $(INSTALL_T) AUTHORS $(DESTDIR)$$DOC;\ $(INSTALL) $(INSTALL_T) LICENSE $(DESTDIR)$$DOC;\ $(INSTALL) $(INSTALL_T) README $(DESTDIR)$$DOC;\ $(INSTALL) $(INSTALL_T) ChangeLog $(DESTDIR)$$DOC;\ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC;\ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC/user-manual;\ fi @# Not all platforms support gzipped man pages. @$(ECHO) Installing man page to $(DESTDIR)$(MAN_DEST)/$(MAN_PAGE) -$(INSTALL) $(INSTALL_T) $(MAN_PAGE) $(DESTDIR)$(MAN_DEST)/$(MAN_PAGE) @# Change the config file default directories according to the configured ones @$(ECHO) Rewriting config for this installation @if [ -f config.base ] ; then \ $(CAT) config >config~ ;\ $(MV) config.base config ;\ fi $(SED) 's+^confdir \.+confdir $(CONF_DEST)+' config | \ $(SED) 's+^logdir \.+logdir $(LOG_DEST)+' >config.tmp -@if [ $(check_doc) = 0 ]; then \ $(SED) 's+^#\?user-manual .*+user-manual $(DOC_DEST)/user-manual/+' config.tmp >config.updated ;\ else \ $(SED) 's+^#\?user-manual .*+user-manual $(prefix)/doc/privoxy/user-manual/+' config.tmp >config.updated ;\ fi;\ $(MV) config config.base $(MV) config.updated config @# Install the config support files. Test for root install, and abort @# if there is no privoxy user, and no other user was enabled during @# configure. Later, install init script if appropriate. @$(ECHO) Installing templates to $(DESTDIR)$(CONF_DEST)/templates @for i in `find templates -type f`; do \ $(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$(CONF_DEST)/templates ;\ done @# FIXME: group/user validation is overly convoluted. @# If superuser install ... we require a minimum of group ownership @# of those files the daemon writes to, to be non-root owned. @if [ "`$(ID) |sed 's/(.*//' |sed 's/.*=//'`" = "0" ] ;then\ if [ x$(USER) = x ] || [ $(USER) = root ]; then \ if [ x$(GROUP) = x ] || [ $(GROUP) = root ]; then \ if [ "`$(ID) privoxy`" ] && \ $(GROUPS) privoxy | $(SED) 's/^.*://' |$(GREP) "\" >/dev/null; then \ $(ECHO) "Warning: Setting group owner to privoxy";\ GROUP_T=privoxy ;\ else \ $(ECHO) "******************************************************************" ;\ $(ECHO) " WARNING! WARNING! installing config files as root!" ;\ $(ECHO) " It is strongly recommended to run $(PROGRAM) as a non-root user," ;\ $(ECHO) " and to install the config files as that user and/or group!" ;\ $(ECHO) " Please read INSTALL, and create a privoxy user and group!" ;\ $(ECHO) "*******************************************************************" ;\ exit 1 ;\ fi ;\ else \ GROUP_T=$(GROUP) ;\ fi ;\ INSTALL_CONF="$(INSTALL_R) -g $$GROUP_T " ;\ else \ $(ECHO) "Superuser install, installing config files as $(USER):$(GROUP_T)" ;\ INSTALL_CONF="$(INSTALL_R) -o $(USER) -g $(GROUP_T)" ;\ GROUP_T=$(GROUP_T) ;\ fi ;\ else \ if [ ! "`id $(USER)`" = "`id`" ] ;then \ $(ECHO) "** WARNING ** current install user different from configured user!!" ;\ $(ECHO) "Edit may fail." ;\ fi ;\ INSTALL_CONF="$(INSTALL_R)" ;\ fi ;\ $(ECHO) Installing configuration files to $(DESTDIR)$(CONF_DEST);\ for i in $(CONFIGS); do \ if [ "$$i" = "default.action" ] || [ "$$i" = "default.filter" ] ; then \ $(RM) $(DESTDIR)$(CONF_DEST)/$$i ;\ $(ECHO) Installing fresh $$i;\ $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\ elif [ -s "$(CONF_DEST)/$$i" ]; then \ $(ECHO) Installing $$i as $$i.new ;\ $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST)/$$i.new || exit 1;\ NEW=1;\ else \ $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\ fi ;\ done ;\ if [ -n "$$NEW" ]; then \ $(CHMOD) $(RWD_MODE) $(DESTDIR)$(CONF_DEST)/*.new || exit 1 ;\ $(ECHO) "Warning: Older config files are preserved. Check new versions for changes!" ;\ fi ;\ [ ! -f $(DESTDIR)$(LOG_DEST)/logfile ] && $(ECHO) Creating logfiles in $(DESTDIR)$(LOG_DEST) || \ $(ECHO) Checking logfiles in $(DESTDIR)$(LOG_DEST) ;\ $(TOUCH) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\ if [ x$$USER != x ]; then \ $(CHOWN) $$USER $(DESTDIR)$(LOG_DEST)/logfile || \ $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\ fi ;\ if [ x$$GROUP_T != x ]; then \ $(CHGRP) $$GROUP_T $(DESTDIR)$(LOG_DEST)/logfile || \ $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\ fi ;\ $(CHMOD) $(RWD_MODE) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\ if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \ if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \ $(SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \ $(SED) 's+%SBIN_DEST%+$(SBIN_DEST)+' | \ $(SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \ $(SED) 's+%USER%+$(USER)+' | \ $(SED) 's+%GROUP%+$(GROUP_T)+' >slackware/rc.privoxy ;\ $(INSTALL) $(INSTALL_P) slackware/rc.privoxy $(DESTDIR)/etc/rc.d/ ;\ $(ECHO) "Installing for Slackware." ;\ $(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\ elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \ $(ECHO) "Installing generic init script to $(DESTDIR)/etc/init.d/privoxy" ;\ $(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\ $(INSTALL) $(INSTALL_P) privoxy-generic.init $(DESTDIR)/etc/init.d/privoxy ;\ fi ;\ else \ $(ECHO) "No init script installed, install it manually if needed" ;\ fi $(RM) config.base config.tmp @# mmmmm, good. @$(ECHO) "$(PROGRAM_V) installation succeeded!" @$(ECHO) "The Privoxy configuration files have been installed in $(DESTDIR)$(CONF_DEST)" # rmdir is used as a precaution since it will not remove non-empty # directories. RH init script creates lock file and pid file. uninstall: CONF_DEST LOG_DEST PID_DEST check_doc @$(ECHO) Starting Privoxy uninstallation @# KILL privoxy if running @# XXX: the chkconfig line may need a DESTDIR prefix. -@test -f $(DESTDIR)$(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\ $(KILL) `$(CAT) $(DESTDIR)$(PID_DEST)/privoxy.pid` || : -@test -f $(DESTDIR)/var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\ $(KILL) `$(CAT) $(DESTDIR)/var/run/privoxy.pid ` || : @# Program binary @$(ECHO) Removing $(PROGRAM) binary $(RM) $(DESTDIR)$(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~ @# config files and dir, and maybe old install backups -@if [ -d $(DESTDIR)$(CONF_DEST) ]; then \ $(ECHO) Saving $(PROGRAM) config files to $(DESTDIR)/tmp/$(PROGRAM)-save ;\ $(MKDIR) $(DESTDIR)/tmp/$(PROGRAM)-save ;\ cd $(DESTDIR)$(CONF_DEST) ;\ for i in $(DESTDIR)$(CONFIGS); do \ [ -f $$i ] && $(CP) $$i $(DESTDIR)/tmp/$(PROGRAM)-save ;\ done ;\ fi @$(ECHO) Removing $(PROGRAM) config files -@for i in $(DESTDIR)$(CONFIGS); do \ test -f $(CONF_DEST)/$$i && $(ECHO) Removing $$i ;\ $(RM) $(DESTDIR)$(CONF_DEST)/$$i $(DESTDIR)$(CONF_DEST)/$$i~ $(DESTDIR)$(CONF_DEST)/$$i.new ;\ done -@test -d $(DESTDIR)$(CONF_DEST)/templates && $(RM) -r $(DESTDIR)$(CONF_DEST)/templates &&\ $(ECHO) "Removing $(DESTDIR)$(CONF_DEST)/templates/*" @# man page and docs @$(ECHO) Removing $(PROGRAM) docs -$(RM) $(DESTDIR)$(MAN_DEST)/$(MAN_PAGE)* -$(RM) -r $(DESTDIR)$(DOC_DEST) || $(RM) -r $(DESTDIR)$(prefix)/doc/privoxy @# Log and pidfile @$(ECHO) Removing $(PROGRAM) logs -$(RM) $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(PID_DEST)/privoxy.pid @# Final clean up of unused directories. Special handling of CONF and LOG # destinations. @$(ECHO) Removing $(PROGRAM) directories @for i in $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(CONF_DEST); do \ if test -d $$i; then \ $(ECHO) Removing $$i ;\ $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\ fi;\ done @if [ ! "$(prefix)" = "/usr/local" ] ;then \ for i in $(DESTDIR)$(MAN_DEST) $(DESTDIR)$(MAN_DIR) $(DESTDIR)$(SHARE_DEST)/doc \ $(DESTDIR)$(SHARE_DEST) $(DESTDIR)$(SBIN_DEST); do \ if test -d $$i; then \ $(ECHO) Removing $$i ;\ $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\ fi;\ done;\ if test $(LOG_DEST) != /var/log/privoxy && test -d $(DESTDIR)$(prefix)/var/log; then \ $(ECHO) Removing $(DESTDIR)$(prefix)/var/log ;\ $(RMDIR) $(DESTDIR)$(prefix)/var/log || $(ECHO) "$(DESTDIR)$(prefix)/var/log is not empty, not removed";\ fi ;\ if test $(PID_DEST) != /var/run && test -d $(DESTDIR)$(prefix)/var/run; then \ $(ECHO) Removing $(DESTDIR)$(prefix)/var/run ;\ $(RMDIR) $(DESTDIR)$(prefix)/var/run || $(ECHO) "$(DESTDIR)$(prefix)/var/run is not empty, not removed";\ fi ;\ if test $(prefix)/var != /var && test -d $(DESTDIR)$(prefix)/var; then \ $(ECHO) Removing $(DESTDIR)$(prefix)/var ;\ $(RMDIR) $(DESTDIR)$(prefix)/var || $(ECHO) "$(DESTDIR)$(prefix)/var is not empty, not removed" ;\ fi ;\ if test $(prefix) != / && test $(prefix) != /usr && test -d $(DESTDIR)$(prefix); then \ $(ECHO) Removing $(DESTDIR)$(prefix) ;\ $(ECHO) Removing installation directory $(DESTDIR)$(prefix) ;\ $(RMDIR) $(DESTDIR)$(prefix) || $(ECHO) "$(DESTDIR)$(prefix) is not empty, not removed" ;\ fi;\ fi @# init scripts @if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \ $(ECHO) Removing $(PROGRAM) init script ;\ if [ -f $(DESTDIR)/etc/slackware-version ] && \ [ -d $(DESTDIR)/etc/rc.d/ ] && [ -w $(DESTDIR)/etc/rc.d/ ] ; then \ $(RM) $(DESTDIR)/etc/rc.d/rc.privoxy ;\ elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \ $(RM) $(DESTDIR)/etc/init.d/privoxy ;\ else \ $(ECHO) "Unable to remove privoxy init script, not installed or permission denied" ;\ fi ;\ fi @$(ECHO) Privoxy uninstalled, bye coffee: @perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,' \ -e '101,0,109,143,205,13,192,32,8,133,239,78,241,110,234,1,28,160,171,' \ -e '152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,' \ -e '143,13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,' \ -e '69,253,36,102,81,49,83,236,19,225,171,131,214,172,163,73,4,168,123,' \ -e '115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,' \ -e '187,54,220,125,193,51,228,11,1,0,0);' | zcat