- - - - - - - - - -

- Privoxy Developer Manual -
- Prev -	-	- Next -

+ } + :link { color: #0000FF } + :visited { color: #840084 } + :active { color: #0000FF } + table.c3 {background-color: #E0E0E0} + span.c2 {font-style: italic} + hr.c1 {text-align: left} + + + + +

+ + + + + + + + + + + + +

Privoxy Developer Manual
Prev		Next

+ +

4. Coding + Guidelines

+ +

4.1. Introduction

+ +

This set of standards is designed to make our lives easier. It is + developed with the simple goal of helping us keep the "new and improved + Privoxy" consistent and reliable. Thus + making maintenance easier and increasing chances of success of the + project.

+ +

And that of course comes back to us as individuals. If we can + increase our development and product efficiencies then we can solve + more of the request for changes/improvements and in general feel good + about ourselves. ;->

- 4. Coding Guidelines -

- 4.1. Introduction -

- This set of standards is designed to make our lives easier. It is - developed with the simple goal of helping us keep the "new and - improved Privoxy" consistent and - reliable. Thus making maintenance easier and increasing chances of - success of the project. -

- And that of course comes back to us as individuals. If we can - increase our development and product efficiencies then we can solve - more of the request for changes/improvements and in general feel - good about ourselves. ;-> -

- 4.2. Using Comments -

- 4.2.1. Comment, Comment, Comment -

- Explanation: -

- Comment as much as possible without commenting the obvious. For - example do not comment "variable_a is equal to variable_b". - Instead explain why variable_a should be equal to the variable_b. - Just because a person can read code does not mean they will - understand why or what is being done. A reader may spend a lot - more time figuring out what is going on when a simple comment or - explanation would have prevented the extra research. Please help - your brother IJB'ers out! -

- The comments will also help justify the intent of the code. If - the comment describes something different than what the code is - doing then maybe a programming error is occurring. -

- Example: -

- - - + +

+
+    
+      4.2. Using Comments
+
+      
+        4.2.1. Comment, Comment,
+        Comment
+
+        Explanation:
+
+        Comment as much as possible without commenting the obvious. For
+        example do not comment "variable_a is equal to variable_b". Instead
+        explain why variable_a should be equal to the variable_b. Just
+        because a person can read code does not mean they will understand why
+        or what is being done. A reader may spend a lot more time figuring
+        out what is going on when a simple comment or explanation would have
+        prevented the extra research. Please help your brother IJB'ers
+        out!
+
+        The comments will also help justify the intent of the code. If the
+        comment describes something different than what the code is doing
+        then maybe a programming error is occurring.
+
+        Example:
+
+        
+          
+            
-            
-          
+               /* if page size greater than 1k ... */
 if ( page_length() > 1024 )
 {
@@ -119,32 +113,29 @@ This demonstrates 2 cases of "what not to do".  The first is a
 "syntax comment".  The second is a comment that does not fit what
 is actually being done.
 
-              
-        
-        
-          
-            4.2.2. Use blocks for comments
-          
-          
-            Explanation:
-          
-          
-            Comments can help or they can clutter. They help when they are
-            differentiated from the code they describe. One line comments do
-            not offer effective separation between the comment and the code.
-            Block identifiers do, by surrounding the code with a clear,
-            definable pattern.
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+      
+
+      
+        4.2.2. Use blocks for
+        comments
+
+        Explanation:
+
+        Comments can help or they can clutter. They help when they are
+        differentiated from the code they describe. One line comments do not
+        offer effective separation between the comment and the code. Block
+        identifiers do, by surrounding the code with a clear, definable
+        pattern.
+
+        Example:
+
+        
+          
+            
-            
-          
+               /*********************************************************************
  * This will stand out clearly in your code!
  *********************************************************************/
@@ -166,43 +157,37 @@ if ( this_variable == that_variable ) /* this may not either */
    do_something_very_important();
 }
 
-              
-          
-            Exception:
-          
-          
-            If you are trying to add a small logic comment and do not wish to
-            "disrupt" the flow of the code, feel free to use a 1 line comment
-            which is NOT on the same line as the code.
-          
-        
-        
-          
-            4.2.3. Keep Comments on their own line
-          
-          
-            Explanation:
-          
-          
-            It goes back to the question of readability. If the comment is on
-            the same line as the code it will be harder to read than the
-            comment that is on its own line.
-          
-          
-            There are three exceptions to this rule, which should be violated
-            freely and often: during the definition of variables, at the end
-            of closing braces, when used to comment parameters.
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+
+        Exception:
+
+        If you are trying to add a small logic comment and do not wish to
+        "disrupt" the flow of the code, feel free to use a 1 line comment
+        which is NOT on the same line as the code.
+      
+
+      
+        4.2.3. Keep Comments on their
+        own line
+
+        Explanation:
+
+        It goes back to the question of readability. If the comment is on
+        the same line as the code it will be harder to read than the comment
+        that is on its own line.
+
+        There are three exceptions to this rule, which should be violated
+        freely and often: during the definition of variables, at the end of
+        closing braces, when used to comment parameters.
+
+        Example:
+
+        
+          
+            
-            
-          
+               /*********************************************************************
  * This will stand out clearly in your code,
  * But the second example won't.
@@ -238,86 +223,71 @@ short do_something_very_important(
 
 }   /* -END- do_something_very_important */
 
-              
-        
-        
-          
-            4.2.4. Comment each logical step
-          
-          
-            Explanation:
-          
-          
-            Logical steps should be commented to help others follow the
-            intent of the written code and comments will make the code more
-            readable.
-          
-          
-            If you have 25 lines of code without a comment, you should
-            probably go back into it to see where you forgot to put one.
-          
-          
-            Most "for", "while", "do", etc... loops _probably_ need a
-            comment. After all, these are usually major logic containers.
-          
-        
-        
-          
-            4.2.5. Comment All Functions Thoroughly
-          
-          
-            Explanation:
-          
-          
-            A reader of the code should be able to look at the comments just
-            prior to the beginning of a function and discern the reason for
-            its existence and the consequences of using it. The reader should
-            not have to read through the code to determine if a given
-            function is safe for a desired use. The proper information
-            thoroughly presented at the introduction of a function not only
-            saves time for subsequent maintenance or debugging, it more
-            importantly aids in code reuse by allowing a user to determine
-            the safety and applicability of any function for the problem at
-            hand. As a result of such benefits, all functions should contain
-            the information presented in the addendum section of this
-            document.
-          
-        
-        
-          
-            4.2.6. Comment at the end of braces if the content
-            is more than one screen length
-          
-          
-            Explanation:
-          
-          
-            Each closing brace should be followed on the same line by a
-            comment that describes the origination of the brace if the
-            original brace is off of the screen, or otherwise far away from
-            the closing brace. This will simplify the debugging, maintenance,
-            and readability of the code.
-          
-          
-            As a suggestion , use the following flags to make the comment and
-            its brace more readable:
-          
-          
-            use following a closing brace: } /* -END- if() or while () or
-            etc... */
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+      
+
+      
+        4.2.4. Comment each logical
+        step
+
+        Explanation:
+
+        Logical steps should be commented to help others follow the intent
+        of the written code and comments will make the code more
+        readable.
+
+        If you have 25 lines of code without a comment, you should
+        probably go back into it to see where you forgot to put one.
+
+        Most "for", "while", "do", etc... loops _probably_ need a comment.
+        After all, these are usually major logic containers.
+      
+
+      
+        4.2.5. Comment All Functions
+        Thoroughly
+
+        Explanation:
+
+        A reader of the code should be able to look at the comments just
+        prior to the beginning of a function and discern the reason for its
+        existence and the consequences of using it. The reader should not
+        have to read through the code to determine if a given function is
+        safe for a desired use. The proper information thoroughly presented
+        at the introduction of a function not only saves time for subsequent
+        maintenance or debugging, it more importantly aids in code reuse by
+        allowing a user to determine the safety and applicability of any
+        function for the problem at hand. As a result of such benefits, all
+        functions should contain the information presented in the addendum
+        section of this document.
+      
+
+      
+        4.2.6. Comment at the end of
+        braces if the content is more than one screen length
+
+        Explanation:
+
+        Each closing brace should be followed on the same line by a
+        comment that describes the origination of the brace if the original
+        brace is off of the screen, or otherwise far away from the closing
+        brace. This will simplify the debugging, maintenance, and readability
+        of the code.
+
+        As a suggestion , use the following flags to make the comment and
+        its brace more readable:
+
+        use following a closing brace: } /* -END- if() or while () or
+        etc... */
+
+        Example:
+
+        
+          
+            
-            
-          
+               if ( 1 == X )
 {
    do_something_very_important();
@@ -332,301 +302,268 @@ if ( 1 == X )
    ...some long list of commands...
 } /* -END- if ( 1 == X ) */
 
-              
-        
+

- 4.3. Naming Conventions -

- 4.3.1. Variable Names -

- Explanation: -

- Use all lowercase, and separate words via an underscore ('_'). Do - not start an identifier with an underscore. (ANSI C reserves - these for use by the compiler and system headers.) Do not use - identifiers which are reserved in ANSI C++. (E.g. template, - class, true, false, ...). This is in case we ever decide to port - Privoxy to C++. -

- Example: -

- - - + +

+    
+
+    
+      4.3. Naming Conventions
+
+      
+        4.3.1. Variable
+        Names
+
+        Explanation:
+
+        Use all lowercase, and separate words via an underscore ('_'). Do
+        not start an identifier with an underscore. (ANSI C reserves these
+        for use by the compiler and system headers.) Do not use identifiers
+        which are reserved in ANSI C++. (E.g. template, class, true, false,
+        ...). This is in case we ever decide to port Privoxy to C++.
+
+        Example:
+
+        
+          
+            
-            
-          
+               int ms_iis5_hack = 0;
 
-              
-          
-            Instead of:
-          
-          
-            
-              
+          
+        
-+            
+
+        Instead of:
+
+        
+          
+            
-            
-          
+               int msiis5hack = 0; int msIis5Hack = 0;
 
-              
-        
-        
-          
-            4.3.2. Function Names
-          
-          
-            Explanation:
-          
-          
-            Use all lowercase, and separate words via an underscore ('_'). Do
-            not start an identifier with an underscore. (ANSI C reserves
-            these for use by the compiler and system headers.) Do not use
-            identifiers which are reserved in ANSI C++. (E.g. template,
-            class, true, false, ...). This is in case we ever decide to port
-            Privoxy to C++.
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+      
+
+      
+        4.3.2. Function
+        Names
+
+        Explanation:
+
+        Use all lowercase, and separate words via an underscore ('_'). Do
+        not start an identifier with an underscore. (ANSI C reserves these
+        for use by the compiler and system headers.) Do not use identifiers
+        which are reserved in ANSI C++. (E.g. template, class, true, false,
+        ...). This is in case we ever decide to port Privoxy to C++.
+
+        Example:
+
+        
+          
+            
-            
-          
+               int load_some_file( struct client_state *csp )
 
-              
-          
-            Instead of:
-          
-          
-            
-              
+          
+        
-+            
+
+        Instead of:
+
+        
+          
+            
-            
-          
+               int loadsomefile( struct client_state *csp )
 int loadSomeFile( struct client_state *csp )
 
-              
-        
-        
-          
-            4.3.3. Header file prototypes
-          
-          
-            Explanation:
-          
-          
-            Use a descriptive parameter name in the function prototype in
-            header files. Use the same parameter name in the header file that
-            you use in the c file.
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+      
+
+      
+        4.3.3. Header file
+        prototypes
+
+        Explanation:
+
+        Use a descriptive parameter name in the function prototype in
+        header files. Use the same parameter name in the header file that you
+        use in the c file.
+
+        Example:
+
+        
+          
+            
-            
-          
+               (.h) extern int load_aclfile( struct client_state *csp );
 (.c) int load_aclfile( struct client_state *csp )
 
-              
-          
-            Instead of:
-          
-          
-            
-              
+          
+        
-+            
+
+        Instead of:
+
+        
+          
+            
-            
-          
+               (.h) extern int load_aclfile( struct client_state * ); or
 (.h) extern int load_aclfile();
 (.c) int load_aclfile( struct client_state *csp )
 
-              
-        
-        
-          
-            4.3.4. Enumerations, and #defines
-          
-          
-            Explanation:
-          
-          
-            Use all capital letters, with underscores between words. Do not
-            start an identifier with an underscore. (ANSI C reserves these
-            for use by the compiler and system headers.)
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+      
+
+      
+        4.3.4. Enumerations, and
+        #defines
+
+        Explanation:
+
+        Use all capital letters, with underscores between words. Do not
+        start an identifier with an underscore. (ANSI C reserves these for
+        use by the compiler and system headers.)
+
+        Example:
+
+        
+          
+            
-            
-          
+               (enumeration) : enum Boolean { FALSE, TRUE };
 (#define) : #define DEFAULT_SIZE 100;
 
-              
-          
-            Note: We
-            have a standard naming scheme for #defines that toggle a feature
-            in the preprocessor: FEATURE_>, where > is a short
-            (preferably 1 or 2 word) description.
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+
+        Note: We have a standard
+        naming scheme for #defines that toggle a feature in the preprocessor:
+        FEATURE_>, where > is a short (preferably 1 or 2 word)
+        description.
+
+        Example:
+
+        
+          
+            
-            
-          
+               #define FEATURE_FORCE 1
 
 #ifdef FEATURE_FORCE
 #define FORCE_PREFIX blah
 #endif /* def FEATURE_FORCE */
 
-              
-        
-        
-          
-            4.3.5. Constants
-          
-          
-            Explanation:
-          
-          
-            Spell common words out entirely (do not remove vowels).
-          
-          
-            Use only widely-known domain acronyms and abbreviations.
-            Capitalize all letters of an acronym.
-          
-          
-            Use underscore (_) to separate adjacent acronyms and
-            abbreviations. Never terminate a name with an underscore.
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+      
+
+      
+        4.3.5. Constants
+
+        Explanation:
+
+        Spell common words out entirely (do not remove vowels).
+
+        Use only widely-known domain acronyms and abbreviations.
+        Capitalize all letters of an acronym.
+
+        Use underscore (_) to separate adjacent acronyms and
+        abbreviations. Never terminate a name with an underscore.
+
+        Example:
+
+        
+          
+            
-            
-          
+               #define USE_IMAGE_LIST 1
 
-              
-          
-            Instead of:
-          
-          
-            
-              
+          
+        
-+            
+
+        Instead of:
+
+        
+          
+            
-            
-          
+               #define USE_IMG_LST 1 or
 #define _USE_IMAGE_LIST 1 or
 #define USE_IMAGE_LIST_ 1 or
 #define use_image_list 1 or
 #define UseImageList 1
 
-              
-        
+

- 4.4. Using Space -

- 4.4.1. Put braces on a line by themselves. -

- Explanation: -

- The brace needs to be on a line all by itself, not at the end of - the statement. Curly braces should line up with the construct - that they're associated with. This practice makes it easier to - identify the opening and closing braces for a block. -

- Example: -

- - - + +

+    
+
+    
+      4.4. Using Space
+
+      
+        4.4.1. Put braces on a line
+        by themselves.
+
+        Explanation:
+
+        The brace needs to be on a line all by itself, not at the end of
+        the statement. Curly braces should line up with the construct that
+        they're associated with. This practice makes it easier to identify
+        the opening and closing braces for a block.
+
+        Example:
+
+        
+          
+            
-            
-          
+               if ( this == that )
 {
    ...
 }
 
-              
-          
-            Instead of:
-          
-          
-            if ( this == that ) { ... }
-          
-          
-            or
-          
-          
-            if ( this == that ) { ... }
-          
-          
-            Note: In
-            the special case that the if-statement is inside a loop, and it
-            is trivial, i.e. it tests for a condition that is obvious from
-            the purpose of the block, one-liners as above may optically
-            preserve the loop structure and make it easier to read.
-          
-          
-            Status:
-            developer-discretion.
-          
-          
-            Example
-            exception:
-          
-          
-            
-              
+          
+        
-+            
+
+        Instead of:
+
+        if ( this == that ) { ... }
+
+        or
+
+        if ( this == that ) { ... }
+
+        Note: In the special
+        case that the if-statement is inside a loop, and it is trivial, i.e.
+        it tests for a condition that is obvious from the purpose of the
+        block, one-liners as above may optically preserve the loop structure
+        and make it easier to read.
+
+        Status:
+        developer-discretion.
+
+        Example exception:
+
+        
+          
+            
-            
-          
+               while ( more lines are read )
 {
    /* Please document what is/is not a comment line here */
@@ -635,112 +572,95 @@ while ( more lines are read )
    do_something( line );
 }
 
-              
-        
-        
-          
-            4.4.2. ALL control statements should have a
-            block
-          
-          
-            Explanation:
-          
-          
-            Using braces to make a block will make your code more readable
-            and less prone to error. All control statements should have a
-            block defined.
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+      
+
+      
+        4.4.2. ALL control
+        statements should have a block
+
+        Explanation:
+
+        Using braces to make a block will make your code more readable and
+        less prone to error. All control statements should have a block
+        defined.
+
+        Example:
+
+        
+          
+            
-            
-          
+               if ( this == that )
 {
    do_something();
    do_something_else();
 }
 
-              
-          
-            Instead of:
-          
-          
-            if ( this == that ) do_something(); do_something_else();
-          
-          
-            or
-          
-          
-            if ( this == that ) do_something();
-          
-          
-            Note: The
-            first example in "Instead of" will execute in a manner other than
-            that which the developer desired (per indentation). Using code
-            braces would have prevented this "feature". The "explanation" and
-            "exception" from the point above also applies.
-          
-        
-        
-          
-            4.4.3. Do not belabor/blow-up boolean
-            expressions
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+
+        Instead of:
+
+        if ( this == that ) do_something(); do_something_else();
+
+        or
+
+        if ( this == that ) do_something();
+
+        Note: The first example
+        in "Instead of" will execute in a manner other than that which the
+        developer desired (per indentation). Using code braces would have
+        prevented this "feature". The "explanation" and "exception" from the
+        point above also applies.
+      
+
+      
+        4.4.3. Do not
+        belabor/blow-up boolean expressions
+
+        Example:
+
+        
+          
+            
-            
-          
+               structure->flag = ( condition );
 
-              
-          
-            Instead of:
-          
-          
-            if ( condition ) { structure->flag = 1; } else {
-            structure->flag = 0; }
-          
-          
-            Note: The
-            former is readable and concise. The later is wordy and
-            inefficient. Please assume that any developer new to the project
-            has at least a "good" knowledge of C/C++. (Hope I do not offend
-            by that last comment ... 8-)
-          
-        
-        
-          
-            4.4.4. Use white space freely because it is
-            free
-          
-          
-            Explanation:
-          
-          
-            Make it readable. The notable exception to using white space
-            freely is listed in the next guideline.
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+
+        Instead of:
+
+        if ( condition ) { structure->flag = 1; } else {
+        structure->flag = 0; }
+
+        Note: The former is
+        readable and concise. The later is wordy and inefficient. Please
+        assume that any developer new to the project has at least a "good"
+        knowledge of C/C++. (Hope I do not offend by that last comment ...
+        8-)
+      
+
+      
+        4.4.4. Use white space
+        freely because it is free
+
+        Explanation:
+
+        Make it readable. The notable exception to using white space
+        freely is listed in the next guideline.
+
+        Example:
+
+        
+          
+            
-            
-          
+               int first_value   = 0;
 int some_value    = 0;
 int another_value = 0;
@@ -750,59 +670,52 @@ if ( this_variable == this_variable )
 
 first_value = old_value + ( ( some_value - another_value ) - whatever )
 
-              
-        
-        
-          
-            4.4.5. Don't use white space around structure
-            operators
-          
-          
-            Explanation:
-          
-          
-            - structure pointer operator ( "->" ) - member operator ( "."
-            ) - functions and parentheses
-          
-          
-            It is a general coding practice to put pointers, references, and
-            function parentheses next to names. With spaces, the connection
-            between the object and variable/function name is not as clear.
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+      
+
+      
+        4.4.5. Don't use white space
+        around structure operators
+
+        Explanation:
+
+        - structure pointer operator ( "->" ) - member operator ( "." )
+        - functions and parentheses
+
+        It is a general coding practice to put pointers, references, and
+        function parentheses next to names. With spaces, the connection
+        between the object and variable/function name is not as clear.
+
+        Example:
+
+        
+          
+            
-            
-          
+               a_struct->a_member;
 a_struct.a_member;
 function_name();
 
-              
-          
-            Instead of:
-            a_struct -> a_member; a_struct . a_member; function_name ();
-          
-        
-        
-          
-            4.4.6. Make the last brace of a function stand
-            out
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+
+        Instead of: a_struct
+        -> a_member; a_struct . a_member; function_name ();
+      
+
+      
+        4.4.6. Make the last brace
+        of a function stand out
+
+        Example:
+
+        
+          
+            
-            
-          
+               int function1( ... )
 {
    ...code...
@@ -815,52 +728,45 @@ int function2( ... )
 {
 }   /* -END- function2 */
 
-              
-          
-            Instead of:
-          
-          
-            int function1( ... ) { ...code... return( ret_code ); } int
-            function2( ... ) { }
-          
-          
-            Note: Use 1
-            blank line before the closing brace and 2 lines afterward. This
-            makes the end of function standout to the most casual viewer.
-            Although function comments help separate functions, this is still
-            a good coding practice. In fact, I follow these rules when using
-            blocks in "for", "while", "do" loops, and long if {} statements
-            too. After all whitespace is free!
-          
-          
-            Status:
-            developer-discretion on the number of blank lines. Enforced is
-            the end of function comments.
-          
-        
-        
-          
-            4.4.7. Use 3 character indentions
-          
-          
-            Explanation:
-          
-          
-            If some use 8 character TABs and some use 3 character TABs, the
-            code can look *very* ragged. So use 3 character indentions only.
-            If you like to use TABs, pass your code through a filter such as
-            "expand -t3" before checking in your code.
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+
+        Instead of:
+
+        int function1( ... ) { ...code... return( ret_code ); } int
+        function2( ... ) { }
+
+        Note: Use 1 blank line
+        before the closing brace and 2 lines afterward. This makes the end of
+        function standout to the most casual viewer. Although function
+        comments help separate functions, this is still a good coding
+        practice. In fact, I follow these rules when using blocks in "for",
+        "while", "do" loops, and long if {} statements too. After all
+        whitespace is free!
+
+        Status:
+        developer-discretion on the number of blank lines. Enforced is the
+        end of function comments.
+      
+
+      
+        4.4.7. Use 3 character
+        indentions
+
+        Explanation:
+
+        If some use 8 character TABs and some use 3 character TABs, the
+        code can look *very* ragged. So use 3 character indentions only. If
+        you like to use TABs, pass your code through a filter such as "expand
+        -t3" before checking in your code.
+
+        Example:
+
+        
+          
+            
-            
-          
+               static const char * const url_code_map[256] =
 {
    NULL, ...
@@ -882,154 +788,132 @@ int function1( ... )
 
 }
 
-              
-        
+

- 4.5. Initializing -

- 4.5.1. Initialize all variables -

- Explanation: -

- Do not assume that the variables declared will not be used until - after they have been assigned a value somewhere else in the code. - Remove the chance of accidentally using an unassigned variable. -

- Example: -

- - - + +

+    
+
+    
+      4.5. Initializing
+
+      
+        4.5.1. Initialize all
+        variables
+
+        Explanation:
+
+        Do not assume that the variables declared will not be used until
+        after they have been assigned a value somewhere else in the code.
+        Remove the chance of accidentally using an unassigned variable.
+
+        Example:
+
+        
+          
+            
-            
-          
+               short a_short = 0;
 float a_float  = 0;
 struct *ptr = NULL;
 
-              
-          
-            Note: It is
-            much easier to debug a SIGSEGV if the message says you are trying
-            to access memory address 00000000 and not 129FA012; or
-            array_ptr[20] causes a SIGSEV vs. array_ptr[0].
-          
-          
-            Status:
-            developer-discretion if and only if the variable is assigned a
-            value "shortly after" declaration.
-          
-        
+

+ +

Note: It is much easier + to debug a SIGSEGV if the message says you are trying to access + memory address 00000000 and not 129FA012; or array_ptr[20] causes a + SIGSEV vs. array_ptr[0].

+ +

Status: + developer-discretion if and only if the variable is assigned a value + "shortly after" declaration.

- 4.6. Functions -

- 4.6.1. Name functions that return a boolean as a - question. -

- Explanation: -

- Value should be phrased as a question that would logically be - answered as a true or false statement -

- Example: -

- - - + +

+    
+
+    
+      4.6. Functions
+
+      
+        4.6.1. Name functions that
+        return a boolean as a question.
+
+        Explanation:
+
+        Value should be phrased as a question that would logically be
+        answered as a true or false statement
+
+        Example:
+
+        
+          
+            
-            
-          
+               should_we_block_this();
 contains_an_image();
 is_web_page_blank();
 
-              
-        
-        
-          
-            4.6.2. Always specify a return type for a
-            function.
-          
-          
-            Explanation:
-          
-          
-            The default return for a function is an int. To avoid ambiguity,
-            create a return for a function when the return has a purpose, and
-            create a void return type if the function does not need to return
-            anything.
-          
-        
-        
-          
-            4.6.3. Minimize function calls when iterating by
-            using variables
-          
-          
-            Explanation:
-          
-          
-            It is easy to write the following code, and a clear argument can
-            be made that the code is easy to understand:
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+      
+
+      
+        4.6.2. Always specify a
+        return type for a function.
+
+        Explanation:
+
+        The default return for a function is an int. To avoid ambiguity,
+        create a return for a function when the return has a purpose, and
+        create a void return type if the function does not need to return
+        anything.
+      
+
+      
+        4.6.3. Minimize function
+        calls when iterating by using variables
+
+        Explanation:
+
+        It is easy to write the following code, and a clear argument can
+        be made that the code is easy to understand:
+
+        Example:
+
+        
+          
+            
-            
-          
+               for ( size_t cnt = 0; cnt < block_list_length(); cnt++ )
 {
    ....
 }
 
-              
-          
-            Note:
-            Unfortunately, this makes a function call for each and every
-            iteration. This increases the overhead in the program, because
-            the compiler has to look up the function each time, call it, and
-            return a value. Depending on what occurs in the
-            block_list_length() call, it might even be creating and
-            destroying structures with each iteration, even though in each
-            case it is comparing "cnt" to the same value, over and over.
-            Remember too - even a call to block_list_length() is a function
-            call, with the same overhead.
-          
-          
-            Instead of using a function call during the iterations, assign
-            the value to a variable, and evaluate using the variable.
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+
+        Note: Unfortunately,
+        this makes a function call for each and every iteration. This
+        increases the overhead in the program, because the compiler has to
+        look up the function each time, call it, and return a value.
+        Depending on what occurs in the block_list_length() call, it might
+        even be creating and destroying structures with each iteration, even
+        though in each case it is comparing "cnt" to the same value, over and
+        over. Remember too - even a call to block_list_length() is a function
+        call, with the same overhead.
+
+        Instead of using a function call during the iterations, assign the
+        value to a variable, and evaluate using the variable.
+
+        Example:
+
+        
+          
+            
-            
-          
+               size_t len = block_list_length();
 
 for ( size_t cnt = 0; cnt < len; cnt++ )
@@ -1037,161 +921,137 @@ for ( size_t cnt = 0; cnt < len; cnt++ )
    ....
 }
 
-              
-          
-            Exceptions:
-            if the value of block_list_length() *may* change or could
-            *potentially* change, then you must code the function call in the
-            for/while loop.
-          
-        
-        
-          
-            4.6.4. Pass and Return by Const Reference
-          
-          
-            Explanation:
-          
-          
-            This allows a developer to define a const pointer and call your
-            function. If your function does not have the const keyword, we
-            may not be able to use your function. Consider strcmp, if it were
-            defined as: extern int strcmp( char *s1, char *s2 );
-          
-          
-            I could then not use it to compare argv's in main: int main( int
-            argc, const char *argv[] ) { strcmp( argv[0], "privoxy" ); }
-          
-          
-            Both these pointers are *const*! If the c runtime library
-            maintainers do it, we should too.
-          
-        
-        
-          
-            4.6.5. Pass and Return by Value
-          
-          
-            Explanation:
-          
-          
-            Most structures cannot fit onto a normal stack entry (i.e. they
-            are not 4 bytes or less). Aka, a function declaration like: int
-            load_aclfile( struct client_state csp )
-          
-          
-            would not work. So, to be consistent, we should declare all
-            prototypes with "pass by value": int load_aclfile( struct
-            client_state *csp )
-          
-        
-        
-          
-            4.6.6. Names of include files
-          
-          
-            Explanation:
-          
-          
-            Your include statements should contain the file name without a
-            path. The path should be listed in the Makefile, using -I as
-            processor directive to search the indicated paths. An exception
-            to this would be for some proprietary software that utilizes a
-            partial path to distinguish their header files from system or
-            other header files.
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+
+        Exceptions: if the value
+        of block_list_length() *may* change or could *potentially* change,
+        then you must code the function call in the for/while loop.
+      
+
+      
+        4.6.4. Pass and Return by
+        Const Reference
+
+        Explanation:
+
+        This allows a developer to define a const pointer and call your
+        function. If your function does not have the const keyword, we may
+        not be able to use your function. Consider strcmp, if it were defined
+        as: extern int strcmp( char *s1, char *s2 );
+
+        I could then not use it to compare argv's in main: int main( int
+        argc, const char *argv[] ) { strcmp( argv[0], "privoxy" ); }
+
+        Both these pointers are *const*! If the c runtime library
+        maintainers do it, we should too.
+      
+
+      
+        4.6.5. Pass and Return by
+        Value
+
+        Explanation:
+
+        Most structures cannot fit onto a normal stack entry (i.e. they
+        are not 4 bytes or less). Aka, a function declaration like: int
+        load_aclfile( struct client_state csp )
+
+        would not work. So, to be consistent, we should declare all
+        prototypes with "pass by value": int load_aclfile( struct
+        client_state *csp )
+      
+
+      
+        4.6.6. Names of include
+        files
+
+        Explanation:
+
+        Your include statements should contain the file name without a
+        path. The path should be listed in the Makefile, using -I as
+        processor directive to search the indicated paths. An exception to
+        this would be for some proprietary software that utilizes a partial
+        path to distinguish their header files from system or other header
+        files.
+
+        Example:
+
+        
+          
+            
-            
-          
+               #include <iostream.h>     /* This is not a local include */
 #include "config.h"       /* This IS a local include */
 
-              
-          
-            Exception:
-          
-          
-            
-              
+          
+        
-+            
+
+        Exception:
+
+        
+          
+            
-            
-          
+               /* This is not a local include, but requires a path element. */
 #include <sys/fileName.h>
 
-              
-
-          
-            Note:
-            Please! do not add "-I." to the Makefile without a _very_ good
-            reason. This duplicates the #include "file.h" behavior.
-          
-        
-        
-          
-            4.6.7. Provide multiple inclusion protection
-          
-          
-            Explanation:
-          
-          
-            Prevents compiler and linker errors resulting from redefinition
-            of items.
-          
-          
-            Wrap each header file with the following syntax to prevent
-            multiple inclusions of the file. Of course, replace PROJECT_H
-            with your file name, with "." Changed to "_", and make it
-            uppercase.
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+
+        Note: Please! do not add
+        "-I." to the Makefile without a _very_ good reason. This duplicates
+        the #include "file.h" behavior.
+      
+
+      
+        4.6.7. Provide multiple
+        inclusion protection
+
+        Explanation:
+
+        Prevents compiler and linker errors resulting from redefinition of
+        items.
+
+        Wrap each header file with the following syntax to prevent
+        multiple inclusions of the file. Of course, replace PROJECT_H with
+        your file name, with "." Changed to "_", and make it uppercase.
+
+        Example:
+
+        
+          
+            
-            
-          
+               #ifndef PROJECT_H_INCLUDED
 #define PROJECT_H_INCLUDED
  ...
 #endif /* ndef PROJECT_H_INCLUDED */
 
-              
-        
-        
-          
-            4.6.8. Use `extern "C"` when appropriate
-          
-          
-            Explanation:
-          
-          
-            If our headers are included from C++, they must declare our
-            functions as `extern "C"`. This has no cost in C, but increases
-            the potential re-usability of our code.
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+      
+
+      
+        4.6.8. Use `extern "C"` when
+        appropriate
+
+        Explanation:
+
+        If our headers are included from C++, they must declare our
+        functions as `extern "C"`. This has no cost in C, but increases the
+        potential re-usability of our code.
+
+        Example:
+
+        
+          
+            
-            
-          
+               #ifdef __cplusplus
 extern "C"
 {
@@ -1203,90 +1063,78 @@ extern "C"
 }
 #endif /* def __cplusplus */
 
-              
-        
-        
-          
-            4.6.9. Where Possible, Use Forward Struct
-            Declaration Instead of Includes
-          
-          
-            Explanation:
-          
-          
-            Useful in headers that include pointers to other struct's.
-            Modifications to excess header files may cause needless compiles.
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+      
+
+      
+        4.6.9. Where Possible, Use
+        Forward Struct Declaration Instead of Includes
+
+        Explanation:
+
+        Useful in headers that include pointers to other struct's.
+        Modifications to excess header files may cause needless compiles.
+
+        Example:
+
+        
+          
+            
-            
-          
+               /*********************************************************************
  * We're avoiding an include statement here!
  *********************************************************************/
 struct file_list;
 extern file_list *xyz;
 
-              
-          
-            Note: If
-            you declare "file_list xyz;" (without the pointer), then
-            including the proper header file is necessary. If you only want
-            to prototype a pointer, however, the header file is unnecessary.
-          
-          
-            Status: Use
-            with discretion.
-          
-        
+

+ +

Note: If you declare + "file_list xyz;" (without the pointer), then including the proper + header file is necessary. If you only want to prototype a pointer, + however, the header file is unnecessary.

+ +

Status: Use with + discretion.

- 4.7. General Coding Practices -

- 4.7.1. Turn on warnings -

- Explanation -

- Compiler warnings are meant to help you find bugs. You should - turn on as many as possible. With GCC, the switch is "-Wall". Try - and fix as many warnings as possible. -

- 4.7.2. Provide a default case for all switch - statements -

- Explanation: -

- What you think is guaranteed is never really guaranteed. The - value that you don't think you need to check is the one that - someday will be passed. So, to protect yourself from the unknown, - always have a default step in a switch statement. -

- Example: -

- - - + +

+    
+
+    
+      4.7. General Coding
+      Practices
+
+      
+        4.7.1. Turn on
+        warnings
+
+        Explanation
+
+        Compiler warnings are meant to help you find bugs. You should turn
+        on as many as possible. With GCC, the switch is "-Wall". Try and fix
+        as many warnings as possible.
+      
+
+      
+        4.7.2. Provide a default
+        case for all switch statements
+
+        Explanation:
+
+        What you think is guaranteed is never really guaranteed. The value
+        that you don't think you need to check is the one that someday will
+        be passed. So, to protect yourself from the unknown, always have a
+        default step in a switch statement.
+
+        Example:
+
+        
+          
+            
-            
-          
+               switch( hash_string( cmd ) )
 {
    case hash_actions_file :
@@ -1304,297 +1152,244 @@ switch( hash_string( cmd ) )
 
 } /* end switch( hash_string( cmd ) ) */
 
-              
-          
-            Note: If
-            you already have a default condition, you are obviously exempt
-            from this point. Of note, most of the WIN32 code calls
-            `DefWindowProc' after the switch statement. This API call
-            *should* be included in a default statement.
-          
-          
-            Another
-            Note: This is not so much a readability issue as a
-            robust programming issue. The "anomaly code goes here" may be no
-            more than a print to the STDERR stream (as in load_config). Or it
-            may really be an abort condition.
-          
-          
-            Status:
-            Programmer discretion is advised.
-          
-        
-        
-          
-            4.7.3. Try to avoid falling through cases in a
-            switch statement.
-          
-          
-            Explanation:
-          
-          
-            In general, you will want to have a 'break' statement within each
-            'case' of a switch statement. This allows for the code to be more
-            readable and understandable, and furthermore can prevent unwanted
-            surprises if someone else later gets creative and moves the code
-            around.
-          
-          
-            The language allows you to plan the fall through from one case
-            statement to another simply by omitting the break statement
-            within the case statement. This feature does have benefits, but
-            should only be used in rare cases. In general, use a break
-            statement for each case statement.
-          
-          
-            If you choose to allow fall through, you should comment both the
-            fact of the fall through and reason why you felt it was
-            necessary.
-          
-        
-        
-          
-            4.7.4. Use 'long' or 'short' Instead of 'int'
-          
-          
-            Explanation:
-          
-          
-            On 32-bit platforms, int usually has the range of long. On 16-bit
-            platforms, int has the range of short.
-          
-          
-            Status:
-            open-to-debate. In the case of most FSF projects (including
-            X/GNU-Emacs), there are typedefs to int4, int8, int16, (or
-            equivalence ... I forget the exact typedefs now). Should we add
-            these to IJB now that we have a "configure" script?
-          
-        
-        
-          
-            4.7.5. Don't mix size_t and other types
-          
-          
-            Explanation:
-          
-          
-            The type of size_t varies across platforms. Do not make
-            assumptions about whether it is signed or unsigned, or about how
-            long it is. Do not compare a size_t against another variable of a
-            different type (or even against a constant) without casting one
-            of the values.
-          
-        
-        
-          
-            4.7.6. Declare each variable and struct on its own
-            line.
-          
-          
-            Explanation:
-          
-          
-            It can be tempting to declare a series of variables all on one
-            line. Don't.
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+
+        Note: If you already
+        have a default condition, you are obviously exempt from this point.
+        Of note, most of the WIN32 code calls `DefWindowProc' after the
+        switch statement. This API call *should* be included in a default
+        statement.
+
+        Another Note: This is
+        not so much a readability issue as a robust programming issue. The
+        "anomaly code goes here" may be no more than a print to the STDERR
+        stream (as in load_config). Or it may really be an abort
+        condition.
+
+        Status: Programmer
+        discretion is advised.
+      
+
+      
+        4.7.3. Try to avoid falling
+        through cases in a switch statement.
+
+        Explanation:
+
+        In general, you will want to have a 'break' statement within each
+        'case' of a switch statement. This allows for the code to be more
+        readable and understandable, and furthermore can prevent unwanted
+        surprises if someone else later gets creative and moves the code
+        around.
+
+        The language allows you to plan the fall through from one case
+        statement to another simply by omitting the break statement within
+        the case statement. This feature does have benefits, but should only
+        be used in rare cases. In general, use a break statement for each
+        case statement.
+
+        If you choose to allow fall through, you should comment both the
+        fact of the fall through and reason why you felt it was
+        necessary.
+      
+
+      
+        4.7.4. Use 'long' or 'short'
+        Instead of 'int'
+
+        Explanation:
+
+        On 32-bit platforms, int usually has the range of long. On 16-bit
+        platforms, int has the range of short.
+
+        Status: open-to-debate.
+        In the case of most FSF projects (including X/GNU-Emacs), there are
+        typedefs to int4, int8, int16, (or equivalence ... I forget the exact
+        typedefs now). Should we add these to IJB now that we have a
+        "configure" script?
+      
+
+      
+        4.7.5. Don't mix size_t and
+        other types
+
+        Explanation:
+
+        The type of size_t varies across platforms. Do not make
+        assumptions about whether it is signed or unsigned, or about how long
+        it is. Do not compare a size_t against another variable of a
+        different type (or even against a constant) without casting one of
+        the values.
+      
+
+      
+        4.7.6. Declare each variable
+        and struct on its own line.
+
+        Explanation:
+
+        It can be tempting to declare a series of variables all on one
+        line. Don't.
+
+        Example:
+
+        
+          
+            
-            
-          
+               long a = 0;
 long b = 0;
 long c = 0;
 
-              
-          
-            Instead of:
-          
-          
-            long a, b, c;
-          
-          
-            Explanation: - there is more room for
-            comments on the individual variables - easier to add new
-            variables without messing up the original ones - when searching
-            on a variable to find its type, there is less clutter to
-            "visually" eliminate
-          
-          
-            Exceptions:
-            when you want to declare a bunch of loop variables or other
-            trivial variables; feel free to declare them on one line. You
-            should, although, provide a good comment on their functions.
-          
-          
-            Status:
-            developer-discretion.
-          
-        
-        
-          
-            4.7.7. Use malloc/zalloc sparingly
-          
-          
-            Explanation:
-          
-          
-            Create a local struct (on the stack) if the variable will live
-            and die within the context of one function call.
-          
-          
-            Only "malloc" a struct (on the heap) if the variable's life will
-            extend beyond the context of one function call.
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+
+        Instead of:
+
+        long a, b, c;
+
+        Explanation: - there is
+        more room for comments on the individual variables - easier to add
+        new variables without messing up the original ones - when searching
+        on a variable to find its type, there is less clutter to "visually"
+        eliminate
+
+        Exceptions: when you
+        want to declare a bunch of loop variables or other trivial variables;
+        feel free to declare them on one line. You should, although, provide
+        a good comment on their functions.
+
+        Status:
+        developer-discretion.
+      
+
+      
+        4.7.7. Use malloc/zalloc
+        sparingly
+
+        Explanation:
+
+        Create a local struct (on the stack) if the variable will live and
+        die within the context of one function call.
+
+        Only "malloc" a struct (on the heap) if the variable's life will
+        extend beyond the context of one function call.
+
+        Example:
+
+        
+          
+            
-            
-          
+               If a function creates a struct and stores a pointer to it in a
 list, then it should definitely be allocated via `malloc'.
 
-              
-        
-        
-          
-            4.7.8. The Programmer Who Uses 'malloc' is
-            Responsible for Ensuring 'free'
-          
-          
-            Explanation:
-          
-          
-            If you have to "malloc" an instance, you are responsible for
-            insuring that the instance is `free'd, even if the deallocation
-            event falls within some other programmer's code. You are also
-            responsible for ensuring that deletion is timely (i.e. not too
-            soon, not too late). This is known as "low-coupling" and is a
-            "good thing (tm)". You may need to offer a free/unload/destructor
-            type function to accommodate this.
-          
-          
-            Example:
-          
-          
-            
-              
+          
+        
-+            
+      
+
+      
+        4.7.8. The Programmer Who
+        Uses 'malloc' is Responsible for Ensuring 'free'
+
+        Explanation:
+
+        If you have to "malloc" an instance, you are responsible for
+        insuring that the instance is `free'd, even if the deallocation event
+        falls within some other programmer's code. You are also responsible
+        for ensuring that deletion is timely (i.e. not too soon, not too
+        late). This is known as "low-coupling" and is a "good thing (tm)".
+        You may need to offer a free/unload/destructor type function to
+        accommodate this.
+
+        Example:
+
+        
+          
+            
-            
-          
+               int load_re_filterfile( struct client_state *csp ) { ... }
 static void unload_re_filterfile( void *f ) { ... }
 
-              
-          
-            Exceptions:
-          
-          
-            The developer cannot be expected to provide `free'ing functions
-            for C run-time library functions ... such as `strdup'.
-          
-          
-            Status:
-            developer-discretion. The "main" use of this standard is for
-            allocating and freeing data structures (complex or nested).
-          
-        
-        
-          
-            4.7.9. Add loaders to the `file_list' structure and
-            in order
-          
-          
-            Explanation:
-          
-          
-            I have ordered all of the "blocker" file code to be in alpha
-            order. It is easier to add/read new blockers when you expect a
-            certain order.
-          
-          
-            Note: It
-            may appear that the alpha order is broken in places by POPUP
-            tests coming before PCRS tests. But since POPUPs can also be
-            referred to as KILLPOPUPs, it is clear that it should come first.
-          
-        
-        
-          
-            4.7.10. "Uncertain" new code and/or changes to
-            existing code, use FIXME or XXX
-          
-          
-            Explanation:
-          
-          
-            If you have enough confidence in new code or confidence in your
-            changes, but are not *quite* sure of the repercussions, add this:
-          
-          
-            /* FIXME: this code has a logic error on platform XYZ, *
-            attempting to fix */ #ifdef PLATFORM ...changed code here...
-            #endif
-          
-          
-            or:
-          
-          
-            /* FIXME: I think the original author really meant this... */
-            ...changed code here...
-          
-          
-            or:
-          
-          
-            /* FIXME: new code that *may* break something else... */ ...new
-            code here...
-          
-          
-            Note: If
-            you make it clear that this may or may not be a "good thing
-            (tm)", it will be easier to identify and include in the project
-            (or conversely exclude from the project).
-          
-        
+

+ +

Exceptions:

+ +

The developer cannot be expected to provide `free'ing functions + for C run-time library functions ... such as `strdup'.

+ +

Status: + developer-discretion. The "main" use of this standard is for + allocating and freeing data structures (complex or nested).

- 4.8. Addendum: Template for files and function - comment blocks: -

- Example for file - comments: -

- - - +

-const char FILENAME_rcs[] = "$Id: coding.html,v 1.54 2010/11/13 12:50:18 fabiankeil Exp $";
+
+      
+        4.7.9. Add loaders to the
+        `file_list' structure and in order
+
+        Explanation:
+
+        I have ordered all of the "blocker" file code to be in alpha
+        order. It is easier to add/read new blockers when you expect a
+        certain order.
+
+        Note: It may appear that
+        the alpha order is broken in places by POPUP tests coming before PCRS
+        tests. But since POPUPs can also be referred to as KILLPOPUPs, it is
+        clear that it should come first.
+      
+
+      
+        4.7.10. "Uncertain" new code
+        and/or changes to existing code, use FIXME or XXX
+
+        Explanation:
+
+        If you have enough confidence in new code or confidence in your
+        changes, but are not *quite* sure of the repercussions, add this:
+
+        /* FIXME: this code has a logic error on platform XYZ, *
+        attempting to fix */ #ifdef PLATFORM ...changed code here...
+        #endif
+
+        or:
+
+        /* FIXME: I think the original author really meant this... */
+        ...changed code here...
+
+        or:
+
+        /* FIXME: new code that *may* break something else... */ ...new
+        code here...
+
+        Note: If you make it
+        clear that this may or may not be a "good thing (tm)", it will be
+        easier to identify and include in the project (or conversely exclude
+        from the project).
+      
+    
+
+    
+      4.8. Addendum: Template for
+      files and function comment blocks:
+
+      Example for file
+      comments:
+
+      
+        
+          
-          
-        
+            +const char FILENAME_rcs[] = "$Id$";
 /*********************************************************************
  *
- * File        :  $Source: /cvsroot/ijbswa/current/doc/webserver/developer-manual/coding.html,v $
+ * File        :  $Source$
  *
  * Purpose     :  (Fill me in with a good description!)
  *
@@ -1629,37 +1424,34 @@ const char FILENAME_rcs[] = "$Id: coding.html,v 1.54 2010/11/13 12:50:18 fabiank
 
 const char FILENAME_h_rcs[] = FILENAME_H_VERSION;
 
-            
-        
-          Note: This
-          declares the rcs variables that should be added to the
-          "show-proxy-args" page. If this is a brand new creation by you, you
-          are free to change the "Copyright" section to represent the rights
-          you wish to maintain.
-        
-        
-          Note: The
-          formfeed character that is present right after the comment flower
-          box is handy for (X|GNU)Emacs users to skip the verbiage and get to
-          the heart of the code (via `forward-page' and `backward-page').
-          Please include it if you can.
-        
-        
-          Example for file header
-          comments:
-        
-        
-          
-            
+        
+      
-+          
+
+      Note: This declares the
+      rcs variables that should be added to the "show-proxy-args" page. If
+      this is a brand new creation by you, you are free to change the
+      "Copyright" section to represent the rights you wish to maintain.
+
+      Note: The formfeed
+      character that is present right after the comment flower box is handy
+      for (X|GNU)Emacs users to skip the verbiage and get to the heart of the
+      code (via `forward-page' and `backward-page'). Please include it if you
+      can.
+
+      Example for file header
+      comments:
+
+      
+        
+          
-          
-        
+             #ifndef _FILENAME_H
 #define _FILENAME_H
-#define FILENAME_H_VERSION "$Id: coding.html,v 1.54 2010/11/13 12:50:18 fabiankeil Exp $"
+#define FILENAME_H_VERSION "$Id$"
 /*********************************************************************
  *
- * File        :  $Source: /cvsroot/ijbswa/current/doc/webserver/developer-manual/coding.html,v $
+ * File        :  $Source$
  *
  * Purpose     :  (Fill me in with a good description!)
  *
@@ -1714,17 +1506,17 @@ extern const char FILENAME_h_rcs[];
   end:
 */
 
-            
-        
-          Example for function
-          comments:
-        
-        
-          
-            
+        
+      
-+          
+
+      Example for function
+      comments:
+
+      
+        
+          
-          
-        
+             /*********************************************************************
  *
  * Function    :  FUNCTION_NAME
@@ -1745,44 +1537,41 @@ int FUNCTION_NAME( void *param1, const char *x )
 
 }
 
-            
-        
-          Note: If we
-          all follow this practice, we should be able to parse our code to
-          create a "self-documenting" web page.
-        
-      
-    
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-            Prev
-          
-            Home
-          
-            Next
-          

-            Documentation Guidelines
-          
-             
-          
-            Testing Guidelines
           
         
       
+
+      Note: If we all follow
+      this practice, we should be able to parse our code to create a
+      "self-documenting" web page.
     
-  
-
+  
+
+  
+    
+
+    
+      
+        
+
+        
 
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Documentation
+        Guidelines   Testing Guidelines
+  
+
+
diff --git a/doc/webserver/developer-manual/contact.html b/doc/webserver/developer-manual/contact.html
index 12d54193..61be520b 100644
--- a/doc/webserver/developer-manual/contact.html
+++ b/doc/webserver/developer-manual/contact.html
@@ -1,406 +1,366 @@
-
+
+
 
-  
-    
-    
-      Contacting the developers, Bug Reporting and Feature Requests
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
-        
-          
-          
-          
-        
-      
-            Privoxy Developer Manual
-          

-            Prev
-          
-          
-            Next
-          
-      
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  span.c2 {font-style: italic}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy Developer Manual
Prev Next
+    
+  
+
+  
+    8. Contacting the
+    developers, Bug Reporting and Feature Requests
+
+    We value your feedback. In fact, we rely on it to improve Privoxy and its configuration. However, please note
+    the following hints, so we can provide you with the best support:
+
+    
+      8.1.
+      Get Support
+
+      For casual users, our support forum at SourceForge is probably best suited:
+      http://sourceforge.net/tracker/?group_id=11118&atid=211118
+
+      All users are of course welcome to discuss their issues on the
+      users mailing list, where the developers also hang
+      around.
+
+      Please don't sent private support requests to individual Privoxy
+      developers, either use the mailing lists or the support trackers.
+
+      If you have to contact a Privoxy developer directly for other
+      reasons, please send a real mail and do not bother with SourceForge's
+      messaging system. Answers to SourceForge messages are usually bounced
+      by SourceForge's mail server in which case the developer wasted time
+      writing a response you don't get. From your point of view it will look
+      like your message has been completely ignored, so this is frustrating
+      for all parties involved.
+
+      Note that the Privoxy mailing lists are moderated. Posts from
+      unsubscribed addresses have to be accepted manually by a moderator.
+      This may cause a delay of several days and if you use a subject that
+      doesn't clearly mention Privoxy or one of its features, your message
+      may be accidentally discarded as spam.
+
+      If you aren't subscribed, you should therefore spend a few seconds
+      to come up with a proper subject. Additionally you should make it clear
+      that you want to get CC'd. Otherwise some responses will be directed to
+      the mailing list only, and you won't see them.
     
-    
-      
-        8. Contacting the developers, Bug Reporting and
-        Feature Requests
-      
-      
-        We value your feedback. In fact, we rely on it to improve Privoxy and its configuration. However,
-        please note the following hints, so we can provide you with the best
-        support:
-      
-      
-        
-          8.1. Get Support
-        
-        
-          For casual users, our support forum at SourceForge is probably best
-          suited: http://sourceforge.net/tracker/?group_id=11118&atid=211118
-        
-        
-          All users are of course welcome to discuss their issues on the users mailing list, where the developers also
-          hang around.
-        
-        
-          Please don't sent private support requests to individual Privoxy
-          developers, either use the mailing lists or the support trackers.
-        
-        
-          If you have to contact a Privoxy developer directly for other
-          reasons, please send a real mail and do not bother with
-          SourceForge's messaging system. Answers to SourceForge messages are
-          usually bounced by SourceForge's mail server in which case the
-          developer wasted time writing a response you don't get. From your
-          point of view it will look like your message has been completely
-          ignored, so this is frustrating for all parties involved.
-        
-        
-          Note that the Privoxy mailing lists are moderated. Posts from
-          unsubscribed addresses have to be accepted manually by a moderator.
-          This may cause a delay of several days and if you use a subject
-          that doesn't clearly mention Privoxy or one of its features, your
-          message may be accidentally discarded as spam.
-        
-        
-          If you aren't subscribed, you should therefore spend a few seconds
-          to come up with a proper subject. Additionally you should make it
-          clear that you want to get CC'd. Otherwise some responses will be
-          directed to the mailing list only, and you won't see them.
-        
+
+    
+      8.2. Reporting
+      Problems
+
+      "Problems" for our purposes, come in two
+      forms:
+
+      
+        
+          Configuration issues, such as ads that slip through, or sites
+          that don't function properly due to one Privoxy "action" or
+          another being turned "on".
+        
+
+        
+          "Bugs" in the programming code that
+          makes up Privoxy, such as that
+          might cause a crash.
+        
+      
+
+      
+        8.2.1.
+        Reporting Ads or Other Configuration Problems
+
+        Please send feedback on ads that slipped through, innocent images
+        that were blocked, sites that don't work properly, and other
+        configuration related problem of default.action file, to http://sourceforge.net/tracker/?group_id=11118&atid=460288,
+        the Actions File Tracker.
+
+        New, improved default.action files may
+        occasionally be made available based on your feedback. These will be
+        announced on the ijbswa-announce list and available from our the files section of our project page.
       
-      
-        
-          8.2. Reporting Problems
-        
-        
-          "Problems" for our purposes, come in two
-          forms:
-        
+
+      
+        8.2.2.
+        Reporting Bugs
+
+        Please report all bugs through our bug tracker: http://sourceforge.net/tracker/?group_id=11118&atid=111118.
+
+        Before doing so, please make sure that the bug has not already been submitted and observe
+        the additional hints at the top of the submit form. If already submitted, please feel free
+        to add any info to the original report that might help to solve the
+        issue.
+
+        Please try to verify that it is a Privoxy bug, and not a browser or site bug or
+        documented behaviour that just happens to be different than what you
+        expected. If unsure, try toggling
+        off Privoxy, and see if the
+        problem persists.
+
+        If you are using your own custom configuration, please try the
+        stock configs to see if the problem is configuration related. If
+        you're having problems with a feature that is disabled by default,
+        please ask around on the mailing list if others can reproduce the
+        problem.
+
+        If you aren't using the latest Privoxy version, the bug may have
+        been found and fixed in the meantime. We would appreciate if you
+        could take the time to upgrade to the latest version (or even the latest CVS
+        snapshot) and verify that your bug still exists.
+
+        Please be sure to provide the following information:
+
         
           
-            
-              Configuration issues, such as ads that slip through, or sites
-              that don't function properly due to one Privoxy "action" or another being turned "on".
-            
+            The exact Privoxy version you
+            are using (if you got the source from CVS, please also provide
+            the source code revisions as shown in http://config.privoxy.org/show-version).
+          
+
+          
+            The operating system and versions you run Privoxy on, (e.g. Windows XP SP2), if you are using a Unix
+            flavor, sending the output of "uname
+            -a" should do, in case of GNU/Linux, please also name the
+            distribution.
+          
+
+          
+            The name, platform, and version of the browser you were using (e.g. Internet Explorer v5.5 for Mac).
+          
+
+          
+            The URL where the problem occurred, or some way for us to
+            duplicate the problem (e.g. http://somesite.example.com/?somethingelse=123).
+          
+
+          
+            Whether your version of Privoxy is one supplied by the Privoxy developers via SourceForge, or if
+            you got your copy somewhere else.
+          
+
+          
+            Whether you are using Privoxy
+            in tandem with another proxy such as Tor. If so, please temporary disable the
+            other proxy to see if the symptoms change.
           
+
           
-            
-              "Bugs" in the programming code that
-              makes up Privoxy, such as that
-              might cause a crash.
-            
+            Whether you are using a personal firewall product. If so, does
+            Privoxy work without it?
+          
+
+          
+            Any other pertinent information to help identify the problem
+            such as config or log file excerpts (yes, you should have log
+            file entries for each action taken). To get a meaningful logfile,
+            please make sure that the logfile
+            directive is being used and the following debug
+            options are enabled:
+
+            
+            debug     1 # Log the destination for each request Privoxy let through. See also debug 1024.

+
+            debug     2 # show each connection status

+
+            debug     4 # show I/O status

+
+            debug     8 # show header parsing

+
+            debug   128 # debug redirects

+            debug   256 # debug GIF de-animation

+
+            debug   512 # Common Log Format

+
+            debug  1024 # Log the destination for requests Privoxy didn't let through, and the reason why.

+
+            debug  4096 # Startup banner and warnings.

+
+            debug  8192 # Non-fatal errorsIf you
+            are having trouble with a filter, please additionally enable
+
+            
+            debug    64 # debug regular expression filtersIf
+            you are using Privoxy 3.0.17 or later and suspect that it
+            interprets the request or the response incorrectly, please enable
+
+            
+            debug 32768 # log all data read from the networkNote
+            that Privoxy log files may contain sensitive information so
+            please don't submit any logfiles you didn't read first. You can
+            mask sensitive information as long as it's clear that you removed
+            something.
           
         
-        
-          
-            8.2.1. Reporting Ads or Other Configuration
-            Problems
-          
-          
-            Please send feedback on ads that slipped through, innocent images
-            that were blocked, sites that don't work properly, and other
-            configuration related problem of default.action file, to http://sourceforge.net/tracker/?group_id=11118&atid=460288,
-            the Actions File Tracker.
-          
-          
-            New, improved default.action files may
-            occasionally be made available based on your feedback. These will
-            be announced on the ijbswa-announce list and available from our the
-            files section of our project page.
-          
-        
-        
-          
-            8.2.2. Reporting Bugs
-          
-          
-            Please report all bugs through our bug tracker: http://sourceforge.net/tracker/?group_id=11118&atid=111118.
-          
-          
-            Before doing so, please make sure that the bug has not already been
-            submitted and observe the additional hints at the top
-            of the submit form. If already submitted, please feel
-            free to add any info to the original report that might help to
-            solve the issue.
-          
-          
-            Please try to verify that it is a Privoxy bug, and not a browser or site bug
-            or documented behaviour that just happens to be different than
-            what you expected. If unsure, try toggling off Privoxy,
-            and see if the problem persists.
-          
-          
-            If you are using your own custom configuration, please try the
-            stock configs to see if the problem is configuration related. If
-            you're having problems with a feature that is disabled by
-            default, please ask around on the mailing list if others can
-            reproduce the problem.
-          
-          
-            If you aren't using the latest Privoxy version, the bug may have
-            been found and fixed in the meantime. We would appreciate if you
-            could take the time to upgrade to the latest version (or even the latest CVS
-            snapshot) and verify that your bug still exists.
-          
-          
-            Please be sure to provide the following information:
-          
-          
-          
-          
-            
-              
-                The exact Privoxy version
-                you are using (if you got the source from CVS, please also
-                provide the source code revisions as shown in http://config.privoxy.org/show-version).
-              
-            
-            
-              
-                The operating system and versions you run Privoxy on, (e.g. Windows XP SP2), if you are using a Unix
-                flavor, sending the output of "uname
-                -a" should do, in case of GNU/Linux, please also name
-                the distribution.
-              
-            
-            
-              
-                The name, platform, and version of the browser you were using (e.g. Internet Explorer v5.5 for Mac).
-              
-            
-            
-              
-                The URL where the problem occurred, or some way for us to
-                duplicate the problem (e.g. http://somesite.example.com/?somethingelse=123).
-              
-            
-            
-              
-                Whether your version of Privoxy is one supplied by the Privoxy developers via
-                SourceForge, or if you got your copy somewhere else.
-              
-            
-            
-              
-                Whether you are using Privoxy in tandem with another proxy
-                such as Tor. If so, please
-                temporary disable the other proxy to see if the symptoms
-                change.
-              
-            
-            
-              
-                Whether you are using a personal firewall product. If so,
-                does Privoxy work without
-                it?
-              
-            
-            
-              
-                Any other pertinent information to help identify the problem
-                such as config or log file excerpts (yes, you should have log
-                file entries for each action taken). To get a meaningful
-                logfile, please make sure that the logfile
-                directive is being used and the following debug
-                options are enabled:
-              
-              
-                debug     1 # Log the destination for each request Privoxy let through. See also debug 1024.

-
-                 debug     2 # show each connection status

-
-                 debug     4 # show I/O status

-
-                 debug     8 # show header parsing

-
-                 debug   128 # debug redirects

-
-                 debug   256 # debug GIF de-animation

-
-                 debug   512 # Common Log Format

-
-                 debug  1024 # Log the destination for requests Privoxy didn't let through, and the reason why.

-
-                 debug  4096 # Startup banner and warnings.

-
-                 debug  8192 # Non-fatal errors
-              
-              If you are having trouble with a filter, please additionally
-              enable
-              
-                debug    64 # debug regular expression filters
-              
-              If you are using Privoxy 3.0.17 or later and suspect that it
-              interprets the request or the response incorrectly, please
-              enable
-              
-                debug 32768 # log all data read from the network
-              
-              Note that Privoxy log files may contain sensitive information
-              so please don't submit any logfiles you didn't read first. You
-              can mask sensitive information as long as it's clear that you
-              removed something.

-            
-          
-
-          
-            You don't have to tell us your actual name when filing a problem
-            report, but if you don't, please use a nickname so we can
-            differentiate between your messages and the ones entered by other
-            "anonymous" users that may respond to your request if they have
-            the same problem or already found a solution. Note that due to
-            spam the trackers may not always allow to post without being
-            logged into SourceForge. If that's the case, you are still free
-            to create a login that isn't directly linked to your name,
-            though.
-          
-          
-            Please also check the status of your request a few days after
-            submitting it, as we may request additional information. If you
-            use a SF id, you should automatically get a mail when someone
-            responds to your request. Please don't bother to add an email
-            address when using the tracker. If you prefer to communicate
-            through email, just use one of the mailing lists directly.
-          
-          
-            The appendix of the Privoxy User Manual also has
-            helpful information on understanding actions, and action
-            debugging.
-          
-        
-      
-      
-        
-          8.3. Request New Features
-        
-        
-          You are welcome to submit ideas on new features or other proposals
-          for improvement through our feature request tracker at http://sourceforge.net/tracker/?atid=361118&group_id=11118.
-        
-      
-      
-        
-          8.4. Mailing Lists
-        
-        
-          If you prefer to communicate through email, instead of using a web
-          interface, feel free to use one of the mailing lists. To discuss
-          issues that haven't been completely diagnosed yet, please use the
-          Privoxy users list. Technically interested users and people who
-          wish to contribute to the project are always welcome on the
-          developers list. You can find an overview of all Privoxy-related mailing lists, including list
-          archives, at: http://sourceforge.net/mail/?group_id=11118.
-        
+
+        You don't have to tell us your actual name when filing a problem
+        report, but if you don't, please use a nickname so we can
+        differentiate between your messages and the ones entered by other
+        "anonymous" users that may respond to your request if they have the
+        same problem or already found a solution. Note that due to spam the
+        trackers may not always allow to post without being logged into
+        SourceForge. If that's the case, you are still free to create a login
+        that isn't directly linked to your name, though.
+
+        Please also check the status of your request a few days after
+        submitting it, as we may request additional information. If you use a
+        SF id, you should automatically get a mail when someone responds to
+        your request. Please don't bother to add an email address when using
+        the tracker. If you prefer to communicate through email, just use one
+        of the mailing lists directly.
+
+        If you are new to reporting problems, you might be interested in
+        How to Report Bugs Effectively.
+
+        If you are new to reporting problems, you might be interested in
+        How to Report Bugs Effectively.
+
+        The appendix of the Privoxy User Manual also has
+        helpful information on understanding actions, and action
+        debugging.
       
     
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-            Prev
-          
-            Home
-          
-            Next
-          

-            Update the Webserver
-          
-             
-          
-            Privoxy Copyright, License and History
-          
+
+    
+      8.3.
+      Request New Features
+
+      You are welcome to submit ideas on new features or other proposals
+      for improvement through our feature request tracker at http://sourceforge.net/tracker/?atid=361118&group_id=11118.
     
-  
-
 
+    
+      8.4.
+      Mailing Lists
+
+      If you prefer to communicate through email, instead of using a web
+      interface, feel free to use one of the mailing lists. To discuss issues
+      that haven't been completely diagnosed yet, please use the Privoxy
+      users list. Technically interested users and people who wish to
+      contribute to the project are always welcome on the developers list.
+      You can find an overview of all Privoxy-related mailing lists, including list
+      archives, at: http://sourceforge.net/mail/?group_id=11118.
+    
+  
+
+  
+    
+
+    
+      
+        
+
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Update the Webserver   Privoxy Copyright, License
+        and History
+  
+
+
diff --git a/doc/webserver/developer-manual/copyright.html b/doc/webserver/developer-manual/copyright.html
index 39b1dd0f..39c52582 100644
--- a/doc/webserver/developer-manual/copyright.html
+++ b/doc/webserver/developer-manual/copyright.html
@@ -1,176 +1,161 @@
-
+
+
 
-  
-    
-    
-      Privoxy Copyright, License and History
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
-        
-          
-          
-          
-        
-      
-            Privoxy Developer Manual
-          

-            Prev
-          
-          
-            Next
-          
-      
-    
-    
-      
-        9. Privoxy Copyright, License and History
-      
-      
-        Copyright © 2001-2011 by Privoxy Developers <ijbswa-developers@lists.sourceforge.net>
-      
-      
-        Some source code is based on code Copyright © 1997 by Anonymous
-        Coders and Junkbusters, Inc. and licensed under the GNU General Public License.
-      
-      
-        
-          9.1. License
-        
-        
-          Privoxy is free software; you can
-          redistribute it and/or modify it under the terms of the GNU General Public License, version 2, as published
-          by the Free Software Foundation.
-        
-        
-          This program is distributed in the hope that it will be useful, but
-          WITHOUT ANY WARRANTY; without even the implied warranty of
-          MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
-          License for details.
-        
-        
-          You should have received a copy of the GNU
-          GPL along with this program; if not, write to the
-        
-        
-           Free Software

-            Foundation, Inc. 51 Franklin
-          Street, Fifth Floor

-            Boston, MA 02110-1301

-            USA 
-        
-      
-      
-        
-          9.2. History
-        
-        
-          A long time ago, there was the Internet Junkbuster, by Anonymous Coders
-          and Junkbusters
-          Corporation. This saved many users a lot of pain in the early
-          days of web advertising and user tracking.
-        
-        
-          But the web, its protocols and standards, and with it, the
-          techniques for forcing ads on users, give up autonomy over their
-          browsing, and for tracking them, keeps evolving. Unfortunately, the
-          Internet Junkbuster did not.
-          Version 2.0.2, published in 1998, was (and is) the last official release available from Junkbusters
-          Corporation. Fortunately, it had been released under the GNU GPL, which allowed further development by others.
-        
-        
-          So Stefan Waldherr started maintaining an improved version of the
-          software, to which eventually a number of people contributed
-          patches. It could already replace banners with a transparent image,
-          and had a first version of pop-up killing, but it was still very
-          closely based on the original, with all its limitations, such as
-          the lack of HTTP/1.1 support, flexible per-site configuration, or
-          content modification. The last release from this effort was version
-          2.0.2-10, published in 2000.
-        
-        
-          Then, some developers picked up the thread, and started turning the
-          software inside out, upside down, and then reassembled it, adding
-          many new features along the way.
-        
-        
-          The result of this is Privoxy,
-          whose first stable version, 3.0, was released August, 2002.
-        
-      
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  a.c2 {font-style: italic}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy Developer Manual
Prev Next
+    
+  
+
+  
+    9. Privoxy
+    Copyright, License and History
+
+    Copyright © 2001-2011 by Privoxy Developers <ijbswa-developers@lists.sourceforge.net>
+
+    Some source code is based on code Copyright © 1997 by Anonymous
+    Coders and Junkbusters, Inc. and licensed under the GNU General Public License.
+
+    
+      9.1. License
+
+      Privoxy is free software; you can
+      redistribute it and/or modify it under the terms of the GNU General Public License, version 2, as published by
+      the Free Software Foundation.
+
+      This program is distributed in the hope that it will be useful, but
+      WITHOUT ANY WARRANTY; without even the implied warranty of
+      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for details.
+
+      You should have received a copy of the GNU
+      GPL along with this program; if not, write to the
+
+       Free Software

+       Foundation, Inc. 51 Franklin
+      Street, Fifth Floor

+       Boston, MA 02110-1301

+       USA 
     
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-            Prev
-          
-            Home
-          
-            Next
-          

-            Contacting the developers, Bug Reporting and Feature Requests
-          
-             
-          
-            See also
-          
+
+    
+      9.2. History
+
+      A long time ago, there was the Internet Junkbuster, by Anonymous Coders and
+      Junkbusters
+      Corporation. This saved many users a lot of pain in the early days
+      of web advertising and user tracking.
+
+      But the web, its protocols and standards, and with it, the
+      techniques for forcing ads on users, give up autonomy over their
+      browsing, and for tracking them, keeps evolving. Unfortunately, the
+      Internet Junkbuster did not. Version
+      2.0.2, published in 1998, was (and is) the last official release available from Junkbusters Corporation. Fortunately, it had been
+      released under the GNU GPL, which allowed further development by others.
+
+      So Stefan Waldherr started maintaining an improved version of the
+      software, to which eventually a number of people contributed patches.
+      It could already replace banners with a transparent image, and had a
+      first version of pop-up killing, but it was still very closely based on
+      the original, with all its limitations, such as the lack of HTTP/1.1
+      support, flexible per-site configuration, or content modification. The
+      last release from this effort was version 2.0.2-10, published in
+      2000.
+
+      Then, some developers picked up the thread, and started turning the
+      software inside out, upside down, and then reassembled it, adding many
+      new features along the way.
+
+      The result of this is Privoxy,
+      whose first stable version, 3.0, was released August, 2002.
     
-  
-
+  
 
+  
+    
+
+    
+      
+        
+
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Contacting the developers,
+        Bug Reporting and Feature Requests   See also
+  
+
+
diff --git a/doc/webserver/developer-manual/cvs.html b/doc/webserver/developer-manual/cvs.html
index 3db67f4f..5a0f571e 100644
--- a/doc/webserver/developer-manual/cvs.html
+++ b/doc/webserver/developer-manual/cvs.html
@@ -1,209 +1,189 @@
-
+
+
 
-  
-    
-    
-      The CVS Repository
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
-        
-          
-          
-          
-        
-      
-            Privoxy Developer Manual
-          

-            Prev
-          
-          
-            Next
-          
-      
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  span.c2 {font-style: italic}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy Developer Manual
Prev Next
+    
+  
+
+  
+    2. The CVS Repository
+
+    If you become part of the active development team, you will eventually
+    need write access to our holy grail, the CVS repository. One of the team
+    members will need to set this up for you. Please read this chapter
+    completely before accessing via CVS.
+
+    
+      2.1. Access to
+      CVS
+
+      The project's CVS repository is hosted on SourceForge. Please refer
+      to the chapters 6 and 7 in SF's site
+      documentation for the technical access details for your operating
+      system. For historical reasons, the CVS server is called ijbswa.cvs.sourceforge.net, the repository is called
+      ijbswa, and the source tree module is called
+      current.
     
-    
-      
-        2. The CVS Repository
-      
-      
-        If you become part of the active development team, you will
-        eventually need write access to our holy grail, the CVS repository.
-        One of the team members will need to set this up for you. Please read
-        this chapter completely before accessing via CVS.
-      
-      
-        
-          2.1. Access to CVS
-        
-        
-          The project's CVS repository is hosted on SourceForge. Please
-          refer to the chapters 6 and 7 in SF's site
-          documentation for the technical access details for your
-          operating system. For historical reasons, the CVS server is called
-          ijbswa.cvs.sourceforge.net, the repository
-          is called ijbswa, and the source tree
-          module is called current.
-        
-      
-      
-        
-          2.2. Branches
-        
-        
-          Within the CVS repository, there are modules and branches. As
-          mentioned, the sources are in the current
-          "module". Other modules are present for
-          platform specific issues. There is a webview of the CVS hierarchy
-          at http://ijbswa.cvs.sourceforge.net/ijbswa/, which might
-          help with visualizing how these pieces fit together.
-        
-        
-          Branches are used to fork a sub-development path from the main
-          trunk. Within the current module where the
-          sources are, there is always at least one "branch" from the main trunk devoted to a stable
-          release series. The main trunk is where active development takes
-          place for the next stable series (e.g. 3.2.x). So just prior to
-          each stable series (e.g. 3.0.x), a branch is created just for
-          stable series releases (e.g. 3.0.0 -> 3.0.1 -> 3.0.2, etc).
-          Once the initial stable release of any stable branch has taken
-          place, this branch is only used for bugfixes, which have had prior
-          testing before being committed to CVS. (See Version Numbers below for
-          details on versioning.)
-        
-        
-          At one time there were two distinct branches: stable and unstable.
-          The more drastic changes were to be in the unstable branch. These
-          branches have now been merged to minimize time and effort of
-          maintaining two branches.
-        
-      
-      
-        
-          2.3. CVS Commit Guidelines
-        
-        
-          The source tree is the heart of every software project. Every
-          effort must be made to ensure that it is readable, compilable and
-          consistent at all times. There are differing guidelines for the
-          stable branch and the main development trunk, and we ask anyone
-          with CVS access to strictly adhere to the following guidelines:
-        
-        
-          Basic Guidelines, for all branches:
-        
-        
-        
-        
-          
-            
-              Please don't commit even a small change without testing it
-              thoroughly first. When we're close to a public release, ask a
-              fellow developer to review your changes.
-            
-          
-          
-            
-              Your commit message should give a concise overview of what you
-              changed (no big details) and why you changed it
-              Just check previous messages for good examples.
-            
-          
-          
-            
-              Don't use the same message on multiple files, unless it equally
-              applies to all those files.
-            
-          
-          
-            
-              If your changes span multiple files, and the code won't
-              recompile unless all changes are committed (e.g. when changing
-              the signature of a function), then commit all files one after
-              another, without long delays in between. If necessary, prepare
-              the commit messages in advance.
-            
-          
-          
-            
-              Before changing things on CVS, make sure that your changes are
-              in line with the team's general consensus on what should be
-              done.
-            
-          
-          
-            
-              Note that near a major public release, we get more cautious.
-              There is always the possibility to submit a patch to the patch tracker instead.
-            
-          
-        
-      
+
+    
+      2.2.
+      Branches
+
+      Within the CVS repository, there are modules and branches. As
+      mentioned, the sources are in the current
+      "module". Other modules are present for
+      platform specific issues. There is a webview of the CVS hierarchy at
+      http://ijbswa.cvs.sourceforge.net/ijbswa/, which might help
+      with visualizing how these pieces fit together.
+
+      Branches are used to fork a sub-development path from the main
+      trunk. Within the current module where the
+      sources are, there is always at least one "branch" from the main trunk devoted to a stable release
+      series. The main trunk is where active development takes place for the
+      next stable series (e.g. 3.2.x). So just prior to each stable series
+      (e.g. 3.0.x), a branch is created just for stable series releases (e.g.
+      3.0.0 -> 3.0.1 -> 3.0.2, etc). Once the initial stable release of
+      any stable branch has taken place, this branch is only used for bugfixes, which have had
+      prior testing before being committed to CVS. (See Version Numbers below for details
+      on versioning.)
+
+      At one time there were two distinct branches: stable and unstable.
+      The more drastic changes were to be in the unstable branch. These
+      branches have now been merged to minimize time and effort of
+      maintaining two branches.
     
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-            Prev
-          
-            Home
-          
-            Next
-          

-            Introduction
-          
-             
-          
-            Documentation Guidelines
-          
+
+    
+      2.3. CVS Commit
+      Guidelines
+
+      The source tree is the heart of every software project. Every effort
+      must be made to ensure that it is readable, compilable and consistent
+      at all times. There are differing guidelines for the stable branch and
+      the main development trunk, and we ask anyone with CVS access to
+      strictly adhere to the following guidelines:
+
+      Basic Guidelines, for all branches:
+
+      
+        
+          Please don't commit even a small change without testing it
+          thoroughly first. When we're close to a public release, ask a
+          fellow developer to review your changes.
+        
+
+        
+          Your commit message should give a concise overview of
+          what you changed (no big
+          details) and why you changed
+          it Just check previous messages for good examples.
+        
+
+        
+          Don't use the same message on multiple files, unless it equally
+          applies to all those files.
+        
+
+        
+          If your changes span multiple files, and the code won't
+          recompile unless all changes are committed (e.g. when changing the
+          signature of a function), then commit all files one after another,
+          without long delays in between. If necessary, prepare the commit
+          messages in advance.
+        
+
+        
+          Before changing things on CVS, make sure that your changes are
+          in line with the team's general consensus on what should be
+          done.
+        
+
+        
+          Note that near a major public release, we get more cautious.
+          There is always the possibility to submit a patch to the patch tracker instead.
+        
+      
     
-  
-
+  
 
+  
+    
+
+    
+      
+        
+
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Introduction   Documentation
+        Guidelines
+  
+
+
diff --git a/doc/webserver/developer-manual/documentation.html b/doc/webserver/developer-manual/documentation.html
index a57a2d26..a3f2338e 100644
--- a/doc/webserver/developer-manual/documentation.html
+++ b/doc/webserver/developer-manual/documentation.html
@@ -1,534 +1,464 @@
-
+
+
 
-  
-    
-    
-      Documentation Guidelines
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
-        
-          
-          
-          
-        
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  span.c3 {font-style: italic}
+  a.c2 {font-style: italic}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    

-            Privoxy Developer Manual
-          

-            Prev
-          
-          
-            Next
-          
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy Developer Manual
Prev Next
+    
+  
+
+  
+    3.
+    Documentation Guidelines
+
+    All formal documents are maintained in Docbook SGML and located in the
+    doc/source/* directory. You will need
+    Docbook, the Docbook
+    DTD's and the Docbook modular stylesheets (or comparable alternatives),
+    and either jade or openjade (recommended) installed in order to build
+    docs from source. Currently there is user-manual, FAQ, and, of
+    course this, the developer-manual in this
+    format. The README, AUTHORS, INSTALL, privoxy.1 (man page), and config
+    files are also now maintained as Docbook SGML. These files, when built,
+    in the top-level source directory are generated files! Also, the
+    Privoxy index.html (and a variation on this file, privoxy-index.html, meant for inclusion with doc
+    packages), are maintained as SGML as well. DO NOT edit these directly. Edit the SGML
+    source, or contact someone involved in the documentation.
+
+    config requires some special handling. The
+    reason it is maintained this way is so that the extensive comments in the
+    file mirror those in user-manual. But the
+    conversion process requires going from SGML to HTML to text to special
+    formatting required for the embedded comments. Some of this does not
+    survive so well. Especially some of the examples that are longer than 80
+    characters. The build process for this file outputs to config.new, which should be reviewed for errors and
+    mis-formatting. Once satisfied that it is correct, then it should be hand
+    copied to config.
+
+    Other, less formal documents (e.g. LICENSE)
+    are maintained as plain text files in the top-level source directory.
+
+    Packagers are encouraged to include this documentation. For those
+    without the ability to build the docs locally, text versions of each are
+    kept in CVS. HTML versions are also being kept in CVS under doc/webserver/*. And PDF version are kept in doc/pdf/*.
+
+    Formal documents are built with the Makefile targets of make dok, or alternately make redhat-dok. If you have problems, try both.
+    The build process uses the document SGML sources in doc/source/*/* to update all text files in
+    doc/text/ and to update all HTML
+    documents in doc/webserver/.
+
+    Documentation writers should please make sure documents build
+    successfully before committing to CVS, if possible.
+
+    How do you update the webserver (i.e. the pages on privoxy.org)?
+
+    
+      
+        First, build the docs by running make
+        dok (or alternately make
+        redhat-dok). For PDF docs, do make dok-pdf.
+      
+
+      
+        Run make webserver which
+        copies all files from doc/webserver to the sourceforge webserver
+        via scp.
+      
+    
+
+    Finished docs should be occasionally submitted to CVS (doc/webserver/*/*.html) so that those without the ability
+    to build them locally, have access to them if needed. This is especially
+    important just prior to a new release! Please do this after the $VERSION
+    and other release specific data in configure.in
+    has been updated (this is done just prior to a new release).
+
+    
+      3.1. Quickstart to Docbook
+      and SGML
+
+      If you are not familiar with SGML, it is a markup language similar
+      to HTML. Actually, not a mark up language per se, but a language used
+      to define markup languages. In fact, HTML is an SGML application. Both
+      will use "tags" to format text and other
+      content. SGML tags can be much more varied, and flexible, but do much
+      of the same kinds of things. The tags, or "elements", are definable in SGML. There is no set
+      "standards". Since we are using Docbook, our tags are those that are defined by
+      Docbook. Much of how the finish
+      document is rendered is determined by the "stylesheets". The stylesheets determine how each tag
+      gets translated to HTML, or other formats.
+
+      Tags in Docbook SGML need to be always "closed". If not, you will likely generate errors.
+      Example: <title>My Title</title>.
+      They are also case-insensitive, but we strongly suggest using all lower
+      case. This keeps compatibility with [Docbook] XML.
+
+      Our documents use "sections" for the most
+      part. Sections will be processed into HTML headers (e.g. h1 for sect1). The Docbook stylesheets will use these to also
+      generate the Table of Contents for each doc. Our TOC's are set to a
+      depth of three. Meaning sect1, sect2, and sect3 will have TOC
+      entries, but sect4 will not. Each section
+      requires a <title> element, and at least
+      one <para>. There is a limit of five
+      section levels in Docbook, but generally three should be sufficient for
+      our purposes.
+
+      Some common elements that you likely will use:
+
+      
+        
+          
+            
+          
+
+          
+            
+          
+
+          
+            
+          
+
+          
+            
+          
+
+          
+            
+          
+
+          
+            
+          
+
+          
+            
+          
+
+          
+            
+          
+
+          
+            
+          
+
+          
+            
+          
+        <para></para>,
+            paragraph delimiter. Most text needs to be within paragraph
+            elements (there are some exceptions).
<emphasis></emphasis>,
+            the stylesheets make this italics.
<filename></filename>,
+            files and directories.
<command></command>,
+            command examples.
<literallayout></literallayout>,
+            like <pre>, more or less.
<itemizedlist></itemizedlist>,
+            list with bullets.
<listitem></listitem>,
+            member of the above.
<screen></screen>,
+            screen output, implies <literallayout>.
<ulink
+            url="example.com"></ulink>, like HTML <a> tag.
<quote></quote>, for,
+            doh, quoting text.
       
-      
+
+      Look at any of the existing docs for examples of all these and
+      more.
+
+      You might also find "Writing Documentation Using DocBook - A Crash Course"
+      useful.
     
-    
-      
-        3. Documentation Guidelines
-      
-      
-        All formal documents are maintained in Docbook SGML and located in
-        the doc/source/* directory. You
-        will need Docbook,
-        the Docbook DTD's and the Docbook modular stylesheets (or comparable
-        alternatives), and either jade or
-        openjade (recommended) installed in
-        order to build docs from source. Currently there is user-manual, FAQ, and, of course this, the developer-manual in this format. The README, AUTHORS, INSTALL, privoxy.1 (man
-        page), and config files are also now
-        maintained as Docbook SGML. These files, when built, in the top-level
-        source directory are generated files! Also, the Privoxy index.html
-        (and a variation on this file, privoxy-index.html, meant for inclusion with doc
-        packages), are maintained as SGML as well. DO NOT edit these directly. Edit the SGML
-        source, or contact someone involved in the documentation.
-      
-      
-        config requires some special handling. The
-        reason it is maintained this way is so that the extensive comments in
-        the file mirror those in user-manual. But
-        the conversion process requires going from SGML to HTML to text to
-        special formatting required for the embedded comments. Some of this
-        does not survive so well. Especially some of the examples that are
-        longer than 80 characters. The build process for this file outputs to
-        config.new, which should be reviewed for
-        errors and mis-formatting. Once satisfied that it is correct, then it
-        should be hand copied to config.
-      
-      
-        Other, less formal documents (e.g. LICENSE)
-        are maintained as plain text files in the top-level source directory.
-      
-      
-        Packagers are encouraged to include this documentation. For those
-        without the ability to build the docs locally, text versions of each
-        are kept in CVS. HTML versions are also being kept in CVS under doc/webserver/*. And PDF version are kept in
-        doc/pdf/*.
-      
-      
-        Formal documents are built with the Makefile targets of make dok, or alternately make redhat-dok. If you have problems, try
-        both. The build process uses the document SGML sources in doc/source/*/* to update all text files
-        in doc/text/ and to update all
-        HTML documents in doc/webserver/.
-      
-      
-        Documentation writers should please make sure documents build
-        successfully before committing to CVS, if possible.
-      
-      
-        How do you update the webserver (i.e. the pages on privoxy.org)?
-      
-      
+
+    
+      3.2. Privoxy Documentation Style
+
+      It will be easier if everyone follows a similar writing style. This
+      just makes it easier to read what someone else has written if it is all
+      done in a similar fashion.
+
+      Here it is:
+
+      
+        
+          All tags should be lower case.
+        
+
         
-          
-            First, build the docs by running make dok (or alternately make redhat-dok). For PDF docs, do make dok-pdf.
-          
+          Tags delimiting a block of text (even small blocks)
+          should be on their own line. Like:
+
+           <para>

+            Some text goes here.

+           </para>

+                 Tags marking
+          individual words, or few words, should be in-line:
+
+          
+            Just to <emphasis>emphasize</emphasis>, some text goes here.

+
+                 
         
+
         
-          
-            Run make webserver which
-            copies all files from doc/webserver to the sourceforge
-            webserver via scp.
-          
+          Tags should be nested and step indented for block text like:
+          (except in-line tags)
+
+           <para>

+            <itemizedlist>

+             <para>

+              <listitem>

+                Some text goes here in our list example.

+
+               </listitem>

+             </para>

+            </itemizedlist>

+           </para>

+                 This makes it easier
+          to find the text amongst the tags ;-)
         
-      
-
-      
-        Finished docs should be occasionally submitted to CVS (doc/webserver/*/*.html) so that those without the
-        ability to build them locally, have access to them if needed. This is
-        especially important just prior to a new release! Please do this
-        after the $VERSION and other release specific data in configure.in has been updated (this is done
-        just prior to a new release).
-      
-      
-        
-          3.1. Quickstart to Docbook and SGML
-        
-        
-          If you are not familiar with SGML, it is a markup language similar
-          to HTML. Actually, not a mark up language per se, but a language
-          used to define markup languages. In fact, HTML is an SGML
-          application. Both will use "tags" to
-          format text and other content. SGML tags can be much more varied,
-          and flexible, but do much of the same kinds of things. The tags, or
-          "elements", are definable in SGML. There
-          is no set "standards". Since we are
-          using Docbook, our tags are those
-          that are defined by Docbook. Much
-          of how the finish document is rendered is determined by the "stylesheets". The stylesheets determine how
-          each tag gets translated to HTML, or other formats.
-        
-        
-          Tags in Docbook SGML need to be always "closed". If not, you will likely generate errors.
-          Example: <title>My
-          Title</title>. They are also case-insensitive, but we
-          strongly suggest using all lower case. This keeps compatibility
-          with [Docbook] XML.
-        
-        
-          Our documents use "sections" for the
-          most part. Sections will be processed into HTML headers (e.g. h1 for sect1). The
-          Docbook stylesheets will use these
-          to also generate the Table of Contents for each doc. Our TOC's are
-          set to a depth of three. Meaning sect1,
-          sect2, and sect3
-          will have TOC entries, but sect4 will not.
-          Each section requires a <title>
-          element, and at least one <para>.
-          There is a limit of five section levels in Docbook, but generally
-          three should be sufficient for our purposes.
-        
-        
-          Some common elements that you likely will use:
-        
-        
-        
-        
-          
-            
-              
-            
-            
-              
-            
-            
-              
-            
-            
-              
-            
-            
-              
-            
-            
-              
-            
-            
-              
-            
-            
-              
-            
-            
-              
-            
-            
-              
-            
-          
-        
-                <para></para>, paragraph
-                delimiter. Most text needs to be within paragraph elements
-                (there are some exceptions).
-              

-                <emphasis></emphasis>, the
-                stylesheets make this italics.
-              

-                <filename></filename>,
-                files and directories.
-              

-                <command></command>,
-                command examples.
-              

-                <literallayout></literallayout>,
-                like <pre>, more or less.
-              

-                <itemizedlist></itemizedlist>,
-                list with bullets.
-              

-                <listitem></listitem>,
-                member of the above.
-              

-                <screen></screen>, screen
-                output, implies <literallayout>.
-              

-                <ulink
-                url="example.com"></ulink>, like HTML <a> tag.
-              

-                <quote></quote>, for, doh,
-                quoting text.
-              
-
-        
-          Look at any of the existing docs for examples of all these and
-          more.
-        
-        
-          You might also find "Writing Documentation Using DocBook - A Crash
-          Course" useful.
-        
-      
-      
-        
-          3.2. Privoxy
-          Documentation Style
-        
-        
-          It will be easier if everyone follows a similar writing style. This
-          just makes it easier to read what someone else has written if it is
-          all done in a similar fashion.
-        
-        
-          Here it is:
-        
-        
-        
-        
-          
-            
-              All tags should be lower case.
-            
-          
-          
-            
-              Tags delimiting a block of text (even small blocks) should
-              be on their own line. Like:
-            
-            
-               <para>

-                 Some text goes here.

-                </para>

-                      
-            
-            Tags marking individual words, or few words, should be in-line:
-            
-                Just to <emphasis>emphasize</emphasis>, some text goes here.

-
-                      
-            
-          
-          
-            
-              Tags should be nested and step indented for block text like:
-              (except in-line tags)
-            
-            
-               <para>

-                 <itemizedlist>

-                  <para>

-                   <listitem>

-                     Some text goes here in our list example.

-
-                    </listitem>

-                  </para>

-                 </itemizedlist>

-                </para>

-                      
-            
-            This makes it easier to find the text amongst the tags ;-)

-          
-          
-            
-              Use white space to separate logical divisions within a
-              document, like between sections. Running everything together
-              consistently makes it harder to read and work on.
-            
-          
-          
-            
-              Do not hesitate to make comments. Comments can either use the
-              <comment> element, or the <!-- --> style comment
-              familiar from HTML. (Note in Docbook v4.x <comment> is
-              replaced by <remark>.)
-            
-          
-          
-            
-              We have an international audience. Refrain from slang, or
-              English idiosyncrasies (too many to list :). Humor also does
-              not translate well sometimes.
-            
-          
-          
-            
-              Try to keep overall line lengths in source files to 80
-              characters or less for obvious reasons. This is not always
-              possible, with lengthy URLs for instance.
-            
-          
-          
-            
-              Our documents are available in differing formats. Right now,
-              they are just plain text, HTML, and PDF, but others are always
-              a future possibility. Be careful with URLs (<ulink>), and
-              avoid this mistake:
-            
-            
-              My favorite site is <ulink
-              url="http://example.com">here</ulink>.
-            
-            
-              This will render as "My favorite site is
-              here", which is not real helpful in a text doc. Better
-              like this:
-            
-            
-              My favorite site is <ulink
-              url="http://example.com">example.com</ulink>.
-            
-          
-          
-            
-              All documents should be spell checked occasionally. aspell can check SGML with the -H option. (ispell I think too.)
-            
-          
-        
-      
-      
-        
-          3.3. Privoxy Custom Entities
-        
-        
-          Privoxy documentation is using a
-          number of customized "entities" to
-          facilitate documentation maintenance.
-        
-        
-          We are using a set of "boilerplate"
-          files with generic text, that is used by multiple docs. This way we
-          can write something once, and use it repeatedly without having to
-          re-write the same content over and over again. If editing such a
-          file, keep in mind that it should be generic. That is the purpose; so it can
-          be used in varying contexts without additional modifications.
-        
-        
-          We are also using what Docbook
-          calls "internal entities". These are
-          like variables in programming. Well, sort of. For instance, we have
-          the p-version entity that contains the
-          current Privoxy version string.
-          You are strongly encouraged to use these where possible. Some of
-          these obviously require re-setting with each release (done by the
-          Makefile). A sampling of custom entities are listed below. See any
-          of the main docs for examples.
-        
-        
-        
-        
-          
-            
-              Re- "boilerplate" text entities are
-              defined like:
-            
-            
-              <!entity supported SYSTEM
-              "supported.sgml">
-            
-            
-              In this example, the contents of the file, supported.sgml is available for inclusion
-              anywhere in the doc. To make this happen, just reference the
-              now defined entity: &supported;
-              (starts with an ampersand and ends with a semi-colon), and the
-              contents will be dumped into the finished doc at that point.
-            
-          
-          
-            
-              Commonly used "internal entities":
-            
-            
-              
-                
-                  
-                
-                
-                  
-                
-                
-                  
-                
-                
-                  
-                
-                
-                  
-                
-              
-            
-                    p-version: the Privoxy version string, e.g. "3.0.18".
-                  

-                    p-status: the project status,
-                    either "alpha", "beta", or "stable".
-                  

-                    p-not-stable: use to conditionally
-                    include text in "not stable"
-                    releases (e.g. "beta").
-                  

-                    p-stable: just the opposite.
-                  

-                    p-text: this doc is only generated
-                    as text.
-                  
-          
-        
-
-        
-          There are others in various places that are defined for a specific
-          purpose. Read the source!
-        
-      
+
+        
+          Use white space to separate logical divisions within a document,
+          like between sections. Running everything together consistently
+          makes it harder to read and work on.
+        
+
+        
+          Do not hesitate to make comments. Comments can either use the
+          <comment> element, or the <!-- --> style comment
+          familiar from HTML. (Note in Docbook v4.x <comment> is
+          replaced by <remark>.)
+        
+
+        
+          We have an international audience. Refrain from slang, or
+          English idiosyncrasies (too many to list :). Humor also does not
+          translate well sometimes.
+        
+
+        
+          Try to keep overall line lengths in source files to 80
+          characters or less for obvious reasons. This is not always
+          possible, with lengthy URLs for instance.
+        
+
+        
+          Our documents are available in differing formats. Right now,
+          they are just plain text, HTML, and PDF, but others are always a
+          future possibility. Be careful with URLs (<ulink>), and avoid
+          this mistake:
+
+          My favorite site is <ulink
+          url="http://example.com">here</ulink>.
+
+          This will render as "My favorite site is
+          here", which is not real helpful in a text doc. Better like
+          this:
+
+          My favorite site is <ulink
+          url="http://example.com">example.com</ulink>.
+        
+
+        
+          All documents should be spell checked occasionally. aspell can check SGML with the -H option. (ispell
+          I think too.)
+        
+      
     
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-            Prev
-          
-            Home
-          
-            Next
-          

-            The CVS Repository
-          
-             
-          
-            Coding Guidelines
-          
+
+    
+      3.3. Privoxy Custom
+      Entities
+
+      Privoxy documentation is using a
+      number of customized "entities" to
+      facilitate documentation maintenance.
+
+      We are using a set of "boilerplate" files
+      with generic text, that is used by multiple docs. This way we can write
+      something once, and use it repeatedly without having to re-write the
+      same content over and over again. If editing such a file, keep in mind
+      that it should be generic.
+      That is the purpose; so it can be used in varying contexts without
+      additional modifications.
+
+      We are also using what Docbook
+      calls "internal entities". These are like
+      variables in programming. Well, sort of. For instance, we have the
+      p-version entity that contains the current
+      Privoxy version string. You are
+      strongly encouraged to use these where possible. Some of these
+      obviously require re-setting with each release (done by the Makefile).
+      A sampling of custom entities are listed below. See any of the main
+      docs for examples.
+
+      
+        
+          Re- "boilerplate" text entities are
+          defined like:
+
+          <!entity supported SYSTEM
+          "supported.sgml">
+
+          In this example, the contents of the file, supported.sgml is available for inclusion anywhere
+          in the doc. To make this happen, just reference the now defined
+          entity: &supported; (starts with an
+          ampersand and ends with a semi-colon), and the contents will be
+          dumped into the finished doc at that point.
+        
+
+        
+          Commonly used "internal
+          entities":
+
+          
+            
+              
+                
+              
+
+              
+                
+              
+
+              
+                
+              
+
+              
+                
+              
+
+              
+                
+              
+            
+          p-version: the
+                Privoxy version string, e.g.
+                "3.0.18".
p-status: the
+                project status, either "alpha",
+                "beta", or "stable".
p-not-stable:
+                use to conditionally include text in "not
+                stable" releases (e.g. "beta").
p-stable: just
+                the opposite.
p-text: this
+                doc is only generated as text.
+        
+      
+
+      There are others in various places that are defined for a specific
+      purpose. Read the source!
     
-  
-
+  
+
+  
+    
+
+    
+      
+        
 
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
The CVS Repository   Coding Guidelines
+  
+
+
diff --git a/doc/webserver/developer-manual/index.html b/doc/webserver/developer-manual/index.html
index b3dc7337..319b5bbf 100644
--- a/doc/webserver/developer-manual/index.html
+++ b/doc/webserver/developer-manual/index.html
@@ -1,494 +1,406 @@
-
+
+
 
-  
-    
-    
-      Privoxy Developer Manual
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          Privoxy Developer Manual
-        
-        
-          _{Copyright © 2001-2009 by Privoxy
-          Developers}

-        
-        
-          $Id: index.html,v 1.55 2011/08/17 10:37:48 fabiankeil Exp $

-        
-        
-          
-          
-            The developer manual provides guidance on coding, testing,
-            packaging, documentation and other issues of importance to those
-            involved with Privoxy
-            development. It is mandatory (and helpful!) reading for anyone
-            who wants to join the team. Note that it's currently out of date
-            and may not be entirely correct. As always, patches are welcome.
-          
-          
-            Please note that this document is constantly evolving. This copy
-            represents the state at the release of version 3.0.18. You can
-            find the latest version of the this manual at http://www.privoxy.org/developer-manual/. Please see
-            the Contact section on how to contact
-            the developers.
-          
-        
-        
-      
-      
-        
-          
-            Table of Contents
-          
-          
-            1. Introduction
-          
-          
-            
-              
-                1.1. Quickstart to
-                Privoxy Development
-              
-            
-          
-          
-            2. The CVS Repository
-          
-          
-            
-              
-                2.1. Access to CVS
-              
-              
-                2.2. Branches
-              
-              
-                2.3. CVS Commit Guidelines
-              
-            
-          
-          
-            3. Documentation Guidelines
-          
-          
-            
-              
-                3.1. Quickstart to Docbook
-                and SGML
-              
-              
-                3.2. Privoxy Documentation Style
-              
-              
-                3.3. Privoxy Custom
-                Entities
-              
-            
-          
-          
-            4. Coding Guidelines
-          
-          
-            
-              
-                4.1. Introduction
-              
-              
-                4.2. Using Comments
-              
-              
-                
-                  
-                    4.2.1. Comment, Comment,
-                    Comment
-                  
-                  
-                    4.2.2. Use blocks for
-                    comments
-                  
-                  
-                    4.2.3. Keep Comments on their
-                    own line
-                  
-                  
-                    4.2.4. Comment each logical
-                    step
-                  
-                  
-                    4.2.5. Comment All Functions
-                    Thoroughly
-                  
-                  
-                    4.2.6. Comment at the end of
-                    braces if the content is more than one screen length
-                  
-                
-              
-              
-                4.3. Naming Conventions
-              
-              
-                
-                  
-                    4.3.1. Variable Names
-                  
-                  
-                    4.3.2. Function Names
-                  
-                  
-                    4.3.3. Header file
-                    prototypes
-                  
-                  
-                    4.3.4. Enumerations, and
-                    #defines
-                  
-                  
-                    4.3.5. Constants
-                  
-                
-              
-              
-                4.4. Using Space
-              
-              
-                
-                  
-                    4.4.1. Put braces on a line by
-                    themselves.
-                  
-                  
-                    4.4.2. ALL control statements
-                    should have a block
-                  
-                  
-                    4.4.3. Do not belabor/blow-up
-                    boolean expressions
-                  
-                  
-                    4.4.4. Use white space freely
-                    because it is free
-                  
-                  
-                    4.4.5. Don't use white space
-                    around structure operators
-                  
-                  
-                    4.4.6. Make the last brace of a
-                    function stand out
-                  
-                  
-                    4.4.7. Use 3 character
-                    indentions
-                  
-                
-              
-              
-                4.5. Initializing
-              
-              
-                
-                  
-                    4.5.1. Initialize all
-                    variables
-                  
-                
-              
-              
-                4.6. Functions
-              
-              
-                
-                  
-                    4.6.1. Name functions that
-                    return a boolean as a question.
-                  
-                  
-                    4.6.2. Always specify a return
-                    type for a function.
-                  
-                  
-                    4.6.3. Minimize function calls
-                    when iterating by using variables
-                  
-                  
-                    4.6.4. Pass and Return by Const
-                    Reference
-                  
-                  
-                    4.6.5. Pass and Return by
-                    Value
-                  
-                  
-                    4.6.6. Names of include
-                    files
-                  
-                  
-                    4.6.7. Provide multiple
-                    inclusion protection
-                  
-                  
-                    4.6.8. Use `extern "C"` when
-                    appropriate
-                  
-                  
-                    4.6.9. Where Possible, Use
-                    Forward Struct Declaration Instead of Includes
-                  
-                
-              
-              
-                4.7. General Coding Practices
-              
-              
-                
-                  
-                    4.7.1. Turn on warnings
-                  
-                  
-                    4.7.2. Provide a default case
-                    for all switch statements
-                  
-                  
-                    4.7.3. Try to avoid falling
-                    through cases in a switch statement.
-                  
-                  
-                    4.7.4. Use 'long' or 'short'
-                    Instead of 'int'
-                  
-                  
-                    4.7.5. Don't mix size_t and
-                    other types
-                  
-                  
-                    4.7.6. Declare each variable
-                    and struct on its own line.
-                  
-                  
-                    4.7.7. Use malloc/zalloc
-                    sparingly
-                  
-                  
-                    4.7.8. The Programmer Who Uses
-                    'malloc' is Responsible for Ensuring 'free'
-                  
-                  
-                    4.7.9. Add loaders to the
-                    `file_list' structure and in order
-                  
-                  
-                    4.7.10. "Uncertain" new code
-                    and/or changes to existing code, use FIXME or XXX
-                  
-                
-              
-              
-                4.8. Addendum: Template for files
-                and function comment blocks:
-              
-            
-          
-          
-            5. Testing Guidelines
-          
-          
-            
-              
-                5.1. Testplan for
-                releases
-              
-              
-                5.2. Test reports
-              
-            
-          
-          
-            6. Releasing a New Version
-          
-          
-            
-              
-                6.1. Version
-                numbers
-              
-              
-                6.2. Before the
-                Release: Freeze
-              
-              
-                6.3. Building and
-                Releasing the Packages
-              
-              
-                
-                  
-                    6.3.1. Note on
-                    Privoxy Packaging
-                  
-                  
-                    6.3.2. Source Tarball
-                  
-                  
-                    6.3.3. SuSE,
-                    Conectiva or Red Hat RPM
-                  
-                  
-                    6.3.4. OS/2
-                  
-                  
-                    6.3.5. Solaris
-                  
-                  
-                    6.3.6. Windows
-                  
-                  
-                    6.3.7. Debian
-                  
-                  
-                    6.3.8. Mac OS
-                    X
-                  
-                  
-                    6.3.9. FreeBSD
-                  
-                  
-                    6.3.10. HP-UX
-                    11
-                  
-                  
-                    6.3.11. Amiga
-                    OS
-                  
-                  
-                    6.3.12. AIX
-                  
-                
-              
-              
-                6.4. Uploading and
-                Releasing Your Package
-              
-              
-                6.5. After the
-                Release
-              
-            
-          
-          
-            7. Update the Webserver
-          
-          
-            8. Contacting the developers, Bug
-            Reporting and Feature Requests
-          
-          
-            
-              
-                8.1. Get Support
-              
-              
-                8.2. Reporting Problems
-              
-              
-                
-                  
-                    8.2.1. Reporting Ads
-                    or Other Configuration Problems
-                  
-                  
-                    8.2.2. Reporting
-                    Bugs
-                  
-                
-              
-              
-                8.3. Request New
-                Features
-              
-              
-                8.4. Mailing Lists
-              
-            
-          
-          
-            9. Privoxy Copyright, License and
-            History
-          
-          
-            
-              
-                9.1. License
-              
-              
-                9.2. History
-              
-            
-          
-          
-            10. See also
-          
-        
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  hr.c2 {text-align: left}
+  dt.c1 {font-weight: bold}
+  
+
+
+
+  
+    
+      Privoxy Developer
+      Manual
+
+      _{Copyright ©
+      2001-2009 by Privoxy
+      Developers}

+
+      $Id: developer-manual.sgml,v 2.36 2011/09/04
+      11:10:12 fabiankeil Exp $

+
+      
+        
+
+        The developer manual provides guidance on coding, testing,
+        packaging, documentation and other issues of importance to those
+        involved with Privoxy development.
+        It is mandatory (and helpful!) reading for anyone who wants to join
+        the team. Note that it's currently out of date and may not be
+        entirely correct. As always, patches are welcome.
+
+        Please note that this document is constantly evolving. This copy
+        represents the state at the release of version 3.0.18. You can find
+        the latest version of the this manual at http://www.privoxy.org/developer-manual/. Please see
+        the Contact section on how to contact the
+        developers.
       
+      
     
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-             
-          
-             
-          
-            Next
-          

-             
-          
-             
-          
-            Introduction
-          
+
+    
+      
+        Table of Contents
+
+        1. Introduction
+
+        
+          
+            1.1. Quickstart to
+            Privoxy Development
+          
+        
+
+        2. The CVS Repository
+
+        
+          
+            2.1. Access to CVS
+
+            2.2. Branches
+
+            2.3. CVS Commit
+            Guidelines
+          
+        
+
+        3. Documentation Guidelines
+
+        
+          
+            3.1. Quickstart to Docbook
+            and SGML
+
+            3.2. Privoxy Documentation Style
+
+            3.3. Privoxy Custom
+            Entities
+          
+        
+
+        4. Coding Guidelines
+
+        
+          
+            4.1. Introduction
+
+            4.2. Using Comments
+
+            
+              
+                4.2.1. Comment, Comment,
+                Comment
+
+                4.2.2. Use blocks for
+                comments
+
+                4.2.3. Keep Comments on their
+                own line
+
+                4.2.4. Comment each logical
+                step
+
+                4.2.5. Comment All Functions
+                Thoroughly
+
+                4.2.6. Comment at the end of
+                braces if the content is more than one screen length
+              
+            
+
+            4.3. Naming Conventions
+
+            
+              
+                4.3.1. Variable Names
+
+                4.3.2. Function Names
+
+                4.3.3. Header file
+                prototypes
+
+                4.3.4. Enumerations, and
+                #defines
+
+                4.3.5. Constants
+              
+            
+
+            4.4. Using Space
+
+            
+              
+                4.4.1. Put braces on a line by
+                themselves.
+
+                4.4.2. ALL control statements
+                should have a block
+
+                4.4.3. Do not belabor/blow-up
+                boolean expressions
+
+                4.4.4. Use white space freely
+                because it is free
+
+                4.4.5. Don't use white space
+                around structure operators
+
+                4.4.6. Make the last brace of a
+                function stand out
+
+                4.4.7. Use 3 character
+                indentions
+              
+            
+
+            4.5. Initializing
+
+            
+              
+                4.5.1. Initialize all
+                variables
+              
+            
+
+            4.6. Functions
+
+            
+              
+                4.6.1. Name functions that
+                return a boolean as a question.
+
+                4.6.2. Always specify a return
+                type for a function.
+
+                4.6.3. Minimize function calls
+                when iterating by using variables
+
+                4.6.4. Pass and Return by Const
+                Reference
+
+                4.6.5. Pass and Return by
+                Value
+
+                4.6.6. Names of include
+                files
+
+                4.6.7. Provide multiple
+                inclusion protection
+
+                4.6.8. Use `extern "C"` when
+                appropriate
+
+                4.6.9. Where Possible, Use
+                Forward Struct Declaration Instead of Includes
+              
+            
+
+            4.7. General Coding
+            Practices
+
+            
+              
+                4.7.1. Turn on
+                warnings
+
+                4.7.2. Provide a default case
+                for all switch statements
+
+                4.7.3. Try to avoid falling
+                through cases in a switch statement.
+
+                4.7.4. Use 'long' or 'short'
+                Instead of 'int'
+
+                4.7.5. Don't mix size_t and
+                other types
+
+                4.7.6. Declare each variable
+                and struct on its own line.
+
+                4.7.7. Use malloc/zalloc
+                sparingly
+
+                4.7.8. The Programmer Who Uses
+                'malloc' is Responsible for Ensuring 'free'
+
+                4.7.9. Add loaders to the
+                `file_list' structure and in order
+
+                4.7.10. "Uncertain" new code
+                and/or changes to existing code, use FIXME or XXX
+              
+            
+
+            4.8. Addendum: Template for files
+            and function comment blocks:
+          
+        
+
+        5. Testing Guidelines
+
+        
+          
+            5.1. Testplan for
+            releases
+
+            5.2. Test
+            reports
+          
+        
+
+        6. Releasing a New Version
+
+        
+          
+            6.1. Version
+            numbers
+
+            6.2. Before the
+            Release: Freeze
+
+            6.3. Building and
+            Releasing the Packages
+
+            
+              
+                6.3.1. Note on
+                Privoxy Packaging
+
+                6.3.2. Source Tarball
+
+                6.3.3. SuSE,
+                Conectiva or Red Hat RPM
+
+                6.3.4. OS/2
+
+                6.3.5. Solaris
+
+                6.3.6. Windows
+
+                6.3.7. Debian
+
+                6.3.8. Mac OS
+                X
+
+                6.3.9. FreeBSD
+
+                6.3.10. HP-UX
+                11
+
+                6.3.11. Amiga
+                OS
+
+                6.3.12. AIX
+              
+            
+
+            6.4. Uploading and
+            Releasing Your Package
+
+            6.5. After the
+            Release
+          
+        
+
+        7. Update the Webserver
+
+        8. Contacting the developers, Bug
+        Reporting and Feature Requests
+
+        
+          
+            8.1. Get
+            Support
+
+            8.2. Reporting
+            Problems
+
+            
+              
+                8.2.1. Reporting Ads
+                or Other Configuration Problems
+
+                8.2.2. Reporting
+                Bugs
+              
+            
+
+            8.3. Request New
+            Features
+
+            8.4. Mailing
+            Lists
+          
+        
+
+        9. Privoxy Copyright, License and
+        History
+
+        
+          
+            9.1. License
+
+            9.2. History
+          
+        
+
+        10. See also
+      
     
-  
-
+  
+
+  
+    
 
+    
+      
+        
+
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+        Next
    Introduction
+  
+
+
diff --git a/doc/webserver/developer-manual/introduction.html b/doc/webserver/developer-manual/introduction.html
index a47acf89..468f2fa6 100644
--- a/doc/webserver/developer-manual/introduction.html
+++ b/doc/webserver/developer-manual/introduction.html
@@ -1,123 +1,116 @@
-
+
+
 
-  
-    
-    
-      Introduction
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
-        
-          
-          
-          
-        
-      
-            Privoxy Developer Manual
-          

-            Prev
-          
-          
-            Next
-          
-      
-    
-    
-      
-        1. Introduction
-      
-      
-        Privoxy, as an heir to Junkbuster, is a Free Software project and the
-        code is licensed under the GNU General Public License version 2. As
-        such, Privoxy development is
-        potentially open to anyone who has the time, knowledge, and desire to
-        contribute in any capacity. Our goals are simply to continue the
-        mission, to improve Privoxy, and to
-        make it available to as wide an audience as possible.
-      
-      
-        One does not have to be a programmer to contribute. Packaging,
-        testing, documenting and porting, are all important jobs as well.
-      
-      
-        
-          1.1. Quickstart to Privoxy Development
-        
-        
-          The first step is to join the developer's mailing list. You can submit your ideas, or
-          even better patches. Patches are best submitted to the Sourceforge
-          tracker set up for this purpose, but can be sent to the list for
-          review too.
-        
-        
-          You will also need to have a cvs package installed, which will
-          entail having ssh installed as well (which seems to be a
-          requirement of SourceForge), in order to access the cvs repository.
-          Having the GNU build tools is also going to be important
-          (particularly, autoconf and gmake).
-        
-        
-          For the time being (read, this section is under construction), you
-          can also refer to the extensive comments in the source code. In
-          fact, reading the code is recommended in any case.
-        
-      
-    
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-            Prev
-          
-            Home
-          
-            Next
-          

-            Privoxy Developer Manual
-          
-             
-          
-            The CVS Repository
-          
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy Developer Manual
Prev Next
+    
+  
+
+  
+    1.
+    Introduction
+
+    Privoxy, as an heir to Junkbuster, is a Free Software project and the code
+    is licensed under the GNU General Public License version 2. As such,
+    Privoxy development is potentially open
+    to anyone who has the time, knowledge, and desire to contribute in any
+    capacity. Our goals are simply to continue the mission, to improve
+    Privoxy, and to make it available to as
+    wide an audience as possible.
+
+    One does not have to be a programmer to contribute. Packaging,
+    testing, documenting and porting, are all important jobs as well.
+
+    
+      1.1. Quickstart
+      to Privoxy Development
+
+      The first step is to join the developer's mailing list. You can submit your ideas, or even
+      better patches. Patches are best submitted to the Sourceforge tracker
+      set up for this purpose, but can be sent to the list for review
+      too.
+
+      You will also need to have a cvs package installed, which will
+      entail having ssh installed as well (which seems to be a requirement of
+      SourceForge), in order to access the cvs repository. Having the GNU
+      build tools is also going to be important (particularly, autoconf and
+      gmake).
+
+      For the time being (read, this section is under construction), you
+      can also refer to the extensive comments in the source code. In fact,
+      reading the code is recommended in any case.
     
-  
-
+  
+
+  
+    
+
+    
+      
+        
 
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Privoxy Developer
+        Manual   The CVS Repository
+  
+
+
diff --git a/doc/webserver/developer-manual/newrelease.html b/doc/webserver/developer-manual/newrelease.html
index 7b01ecf5..49f1e8da 100644
--- a/doc/webserver/developer-manual/newrelease.html
+++ b/doc/webserver/developer-manual/newrelease.html
@@ -1,1282 +1,1089 @@
-
+
+
 
-  
-    
-    
-      Releasing a New Version
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  tt.c5 {font-style: italic}
+  td.c4 {font-weight: bold}
+  table.c3 {background-color: #E0E0E0}
+  span.c2 {font-style: italic}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    

-            Privoxy Developer Manual
-          
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy Developer Manual
Prev Next
+    
+  
+
+  
+    6. Releasing a New
+    Version
+
+    When we release versions of Privoxy,
+    our work leaves our cozy secret lab and has to work in the cold
+    RealWorld[tm]. Once it is released, there is no way to call it back, so
+    it is very important that great care is taken to ensure that everything
+    runs fine, and not to introduce problems in the very last minute.
+
+    So when releasing a new version, please adhere exactly to the
+    procedure outlined in this chapter.
+
+    The following programs are required to follow this process: ncftpput (ncftp), scp, ssh
+    (ssh), gmake (GNU's version of make), autoconf,
+    cvs.
+
+    
+      6.1.
+      Version numbers
+
+      First you need to determine which version number the release will
+      have. Privoxy version numbers consist
+      of three numbers, separated by dots, like in X.Y.Z (e.g. 3.0.0),
+      where:
+
+      
+        
+          X, the version major, is rarely ever changed. It is increased by
+          one if turning a development branch into stable substantially
+          changes the functionality, user interface or configuration syntax.
+          Majors 1 and 2 were Junkbuster,
+          and 3 will be the first stable Privoxy release.
+        
+
+        
+          Y, the version minor, represents the branch within the major
+          version. At any point in time, there are two branches being
+          maintained: The stable branch, with an even minor, say, 2N, in
+          which no functionality is being added and only bug-fixes are made,
+          and 2N+1, the development branch, in which the further development
+          of Privoxy takes place. This
+          enables us to turn the code upside down and inside out, while at
+          the same time providing and maintaining a stable version. The minor
+          is reset to zero (and one) when the major is incremented. When a
+          development branch has matured to the point where it can be turned
+          into stable, the old stable branch 2N is given up (i.e. no longer
+          maintained), the former development branch 2N+1 becomes the new
+          stable branch 2N+2, and a new development branch 2N+3 is
+          opened.
+        
+
+        
+          Z, the point or sub version, represents a release of the
+          software within a branch. It is therefore incremented immediately
+          before each code freeze. In development branches, only the even
+          point versions correspond to actual releases, while the odd ones
+          denote the evolving state of the sources on CVS in between. It
+          follows that Z is odd on CVS in development branches most of the
+          time. There, it gets increased to an even number immediately before
+          a code freeze, and is increased to an odd number again immediately
+          thereafter. This ensures that builds from CVS snapshots are easily
+          distinguished from released versions. The point version is reset to
+          zero when the minor changes.
+
+          Stable branches work a little differently, since there should be
+          little to no development happening in such branches. Remember, only
+          bugfixes, which presumably should have had some testing before
+          being committed. Stable branches will then have their version
+          reported as 0.0.0, during that period
+          between releases when changes are being added. This is to denote
+          that this code is not for
+          release. Then as the release nears, the version is bumped
+          according: e.g. 3.0.1 -> 0.0.0 ->
+          3.0.2.
+        
+      
+
+      In summary, the main CVS trunk is the development branch where new
+      features are being worked on for the next stable series. This should
+      almost always be where the most activity takes place. There is always
+      at least one stable branch from the trunk, e.g now it is 3.0, which is only used to release stable versions. Once
+      the initial *.0 release of the stable branch has been done, then as a
+      rule, only bugfixes that have had prior testing should be committed to
+      the stable branch. Once there are enough bugfixes to justify a new
+      release, the version of this branch is again incremented Example: 3.0.0
+      -> 3.0.1 -> 3.0.2, etc are all stable releases from within the
+      stable branch. 3.1.x is currently the main trunk, and where work on
+      3.2.x is taking place. If any questions, please post to the devel list
+      before committing to a stable
+      branch!
+
+      Developers should remember too that if they commit a bugfix to the
+      stable branch, this will more than likely require a separate submission
+      to the main trunk, since these are separate development trees within
+      CVS. If you are working on both, then this would require at least two
+      separate check outs (i.e main trunk, and the stable release branch, which is
+      v_3_0_branch at the moment).
+    
+
+    
+      6.2.
+      Before the Release: Freeze
+
+      The following must be done by one
+      of the developers prior to each new release.
+
+      
+        
+          Make sure that everybody who has worked on the code in the last
+          couple of days has had a chance to yell "no!" in case they have pending changes/fixes in
+          their pipelines. Announce the freeze so that nobody will interfere
+          with last minute changes.
+        
+
+        
+          Increment the version number (point from odd to even in
+          development branches!) in configure.in.
+          (RPM spec files will need to be incremented as well.)
+        
+
+        
+          If default.action has changed since
+          last release (i.e. software release or standalone actions file
+          release), bump up its version info to A.B in this line:
+
+          
+            
+              
+            
+          
+                +  {+add-header{X-Actions-File-Version: A.B} -filter -no-popups}
+
+              
+
+          Then change the version info in doc/webserver/actions/index.php,
+          line: '$required_actions_file_version = "A.B";'
+        
+
+        
+          All documentation should be rebuild after the version bump.
+          Finished docs should be then be committed to CVS (for those without
+          the ability to build these). Some docs may require rather obscure
+          processing tools. config, the man page
+          (and the html version of the man page), and the PDF docs fall in
+          this category. REAMDE, the man page, AUTHORS, and config should all
+          also be committed to CVS for other packagers. The formal docs
+          should be uploaded to the webserver. See the Section "Updating the
+          webserver" in this manual for details.
+        
+
+        
+          The User Manual is also used for
+          context sensitive help for the CGI editor. This is version
+          sensitive, so that the user will get appropriate help for his/her
+          release. So with each release a fresh version should be uploaded to
+          the webserver (this is in addition to the main User Manual link from the main page since we need
+          to keep manuals for various versions available). The CGI pages will
+          link to something like http://privoxy.org/$(VERSION)/user-manual/. This
+          will need to be updated for each new release. There is no Makefile
+          target for this at this time!!! It needs to be done manually.
+        
+
+        
+          All developers should look at the ChangeLog and make sure noteworthy changes are
+          referenced.
+        
+
+        
+          Commit all files that were
+          changed in the above steps!
+        
+
+        
+          Tag all files in CVS with the version number with "cvs tag v_X_Y_Z". Don't use
+          vX_Y_Z, ver_X_Y_Z, v_X.Y.Z (won't work) etc.
+        
+
+        
+          If the release was in a development branch, increase the point
+          version from even to odd (X.Y.(Z+1)) again in configure.in and commit your change.
+        
+
+        
+          On the webserver, copy the user manual to a new top-level
+          directory called X.Y.Z. This ensures that
+          help links from the CGI pages, which have the version as a prefix,
+          will go into the right version of the manual. If this is a
+          development branch release, also symlink X.Y.(Z-1) to X.Y.Z and
+          X.Y.(Z+1) to .
+          (i.e. dot).
+        
+      
+    
+
+    
+      6.3. Building
+      and Releasing the Packages
+
+      Now the individual packages can be built and released. Note that for
+      GPL reasons the first package to be released is always the source
+      tarball.
+
+      For all types of packages,
+      including the source tarball, you
+      must make sure that you build from clean sources by exporting the right
+      version from CVS into an empty directory (just press return when
+      asked for a password):
+
+      
-          
-          
-          
         
-            Prev
-          
-          
-            Next
+          
+            +  mkdir dist # delete or choose different name if it already exists
+  cd dist
+  cvs -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa login
+  cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current
+
           
         
       
-      
-    
-    
-      
-        6. Releasing a New Version
-      
-      
-        When we release versions of Privoxy,
-        our work leaves our cozy secret lab and has to work in the cold
-        RealWorld[tm]. Once it is released, there is no way to call it back,
-        so it is very important that great care is taken to ensure that
-        everything runs fine, and not to introduce problems in the very last
-        minute.
-      
-      
-        So when releasing a new version, please adhere exactly to the
-        procedure outlined in this chapter.
-      
-      
-        The following programs are required to follow this process: ncftpput (ncftp), scp,
-        ssh (ssh), gmake (GNU's version of
-        make), autoconf, cvs.
-      
-      
-        
-          6.1. Version numbers
-        
-        
-          First you need to determine which version number the release will
-          have. Privoxy version numbers
-          consist of three numbers, separated by dots, like in X.Y.Z (e.g.
-          3.0.0), where:
-        
-        
-          
-            
-              X, the version major, is rarely ever changed. It is increased
-              by one if turning a development branch into stable
-              substantially changes the functionality, user interface or
-              configuration syntax. Majors 1 and 2 were Junkbuster, and 3 will be the first stable
-              Privoxy release.
-            
-          
-          
-            
-              Y, the version minor, represents the branch within the major
-              version. At any point in time, there are two branches being
-              maintained: The stable branch, with an even minor, say, 2N, in
-              which no functionality is being added and only bug-fixes are
-              made, and 2N+1, the development branch, in which the further
-              development of Privoxy takes
-              place. This enables us to turn the code upside down and inside
-              out, while at the same time providing and maintaining a stable
-              version. The minor is reset to zero (and one) when the major is
-              incremented. When a development branch has matured to the point
-              where it can be turned into stable, the old stable branch 2N is
-              given up (i.e. no longer maintained), the former development
-              branch 2N+1 becomes the new stable branch 2N+2, and a new
-              development branch 2N+3 is opened.
-            
-          
-          
-            
-              Z, the point or sub version, represents a release of the
-              software within a branch. It is therefore incremented
-              immediately before each code freeze. In development branches,
-              only the even point versions correspond to actual releases,
-              while the odd ones denote the evolving state of the sources on
-              CVS in between. It follows that Z is odd on CVS in development
-              branches most of the time. There, it gets increased to an even
-              number immediately before a code freeze, and is increased to an
-              odd number again immediately thereafter. This ensures that
-              builds from CVS snapshots are easily distinguished from
-              released versions. The point version is reset to zero when the
-              minor changes.
-            
-            
-              Stable branches work a little differently, since there should
-              be little to no development happening in such branches.
-              Remember, only bugfixes, which presumably should have had some
-              testing before being committed. Stable branches will then have
-              their version reported as 0.0.0,
-              during that period between releases when changes are being
-              added. This is to denote that this code is not for release. Then
-              as the release nears, the version is bumped according: e.g. 3.0.1 -> 0.0.0 -> 3.0.2.
-            
-          
-        
 
-        
-          In summary, the main CVS trunk is the development branch where new
-          features are being worked on for the next stable series. This
-          should almost always be where the most activity takes place. There
-          is always at least one stable branch from the trunk, e.g now it is
-          3.0, which is only used to release stable
-          versions. Once the initial *.0 release of the stable branch has
-          been done, then as a rule, only bugfixes that have had prior
-          testing should be committed to the stable branch. Once there are
-          enough bugfixes to justify a new release, the version of this
-          branch is again incremented Example: 3.0.0 -> 3.0.1 -> 3.0.2,
-          etc are all stable releases from within the stable branch. 3.1.x is
-          currently the main trunk, and where work on 3.2.x is taking place.
-          If any questions, please post to the devel list before committing to a
-          stable branch!
-        
-        
-          Developers should remember too that if they commit a bugfix to the
-          stable branch, this will more than likely require a separate
-          submission to the main trunk, since these are separate development
-          trees within CVS. If you are working on both, then this would
-          require at least two separate check outs (i.e main trunk, and the stable
-          release branch, which is v_3_0_branch at
-          the moment).
-        
+      Do NOT change a single
+      bit, including, but not limited to version information after export
+      from CVS. This is to make sure that all release packages, and with
+      them, all future bug reports, are based on exactly the same code.
+
+      
+        
+          
+            
+          
+
+          
+            
+          
+        Warning

+              Every significant release of Privoxy has included at least
+              one package that either had incorrect versions of files,
+              missing files, or incidental leftovers from a previous build
+              process that gave unknown numbers of users headaches to try to
+              figure out what was wrong. PLEASE, make sure you are using
+              pristene sources, and are following the prescribed process!
+            
       
-      
-        
-          6.2. Before the Release: Freeze
-        
-        
-          The following must be
-          done by one of the developers prior to each new release.
-        
-        
-        
+
+      Please find additional instructions for the source tarball and the
+      individual platform dependent binary packages below. And details on the
+      Sourceforge release process below that.
+
+      
+        6.3.1. Note on Privoxy Packaging
+
+        Please keep these general guidelines in mind when putting together
+        your package. These apply to all platforms!
+
         
           
-            
-              Make sure that everybody who has worked on the code in the last
-              couple of days has had a chance to yell "no!" in case they have pending changes/fixes in
-              their pipelines. Announce the freeze so that nobody will
-              interfere with last minute changes.
-            
-          
-          
-            
-              Increment the version number (point from odd to even in
-              development branches!) in configure.in. (RPM spec files will need to be
-              incremented as well.)
-            
+            Privoxy requires write access to: all
+            *.action files, all logfiles, and the
+            trust file. You will need to determine
+            the best way to do this for your platform.
           
+
           
-            
-              If default.action has changed since
-              last release (i.e. software release or standalone actions file
-              release), bump up its version info to A.B in this line:
-            
-            
-            
-            
-              
-                
-              
+            Please include up to date documentation. At a bare
+            minimum:
+
+            
--  {+add-header{X-Actions-File-Version: A.B} -filter -no-popups}
-
-                
+              
+                
+                  
+                
+              LICENSE (top-level
+                  directory)
             
 
-            
-              Then change the version info in
-              doc/webserver/actions/index.php, line:
-              '$required_actions_file_version = "A.B";'
-            
-          
-          
-            
-              All documentation should be rebuild after the version bump.
-              Finished docs should be then be committed to CVS (for those
-              without the ability to build these). Some docs may require
-              rather obscure processing tools. config, the man page (and the html version of
-              the man page), and the PDF docs fall in this category. REAMDE,
-              the man page, AUTHORS, and config should all also be committed
-              to CVS for other packagers. The formal docs should be uploaded
-              to the webserver. See the Section "Updating the webserver" in
-              this manual for details.
-            
-          
-          
-            
-              The User Manual is also used for
-              context sensitive help for the CGI editor. This is version
-              sensitive, so that the user will get appropriate help for
-              his/her release. So with each release a fresh version should be
-              uploaded to the webserver (this is in addition to the main User Manual link from the main page since
-              we need to keep manuals for various versions available). The
-              CGI pages will link to something like http://privoxy.org/$(VERSION)/user-manual/. This
-              will need to be updated for each new release. There is no
-              Makefile target for this at this time!!! It needs to be done
-              manually.
-            
-          
-          
-            
-              All developers should look at the ChangeLog and make sure noteworthy changes are
-              referenced.
-            
+            
+              
+                
+                  
+                
+              
+            README (top-level
+                  directory)
+
+            
+              
+                
+                  
+                
+              
+            AUTHORS (top-level
+                  directory)
+
+            
+              
+                
+                  
+                
+              
+            man page (top-level
+                  directory, Unix-like platforms only)
+
+            
+              
+                
+                  
+                
+              
+            The User Manual
+                  (doc/webserver/user-manual/)
+
+            
+              
+                
+                  
+                
+              
+            FAQ (doc/webserver/faq/)
+
+            Also suggested: Developer Manual
+            (doc/webserver/developer-manual) and ChangeLog (top-level directory). FAQ and the manuals are HTML docs. There are also
+            text versions in doc/text/ which could
+            conceivably also be included.
+
+            The documentation has been designed such that the manuals are
+            linked to each other from parallel directories, and should be
+            packaged that way. privoxy-index.html
+            can also be included and can serve as a focal point for docs and
+            other links of interest (and possibly renamed to index.html). This should be one level up from the
+            manuals. There is a link also on this page to an HTMLized version
+            of the man page. To avoid 404 for this, it is in CVS as
+            doc/webserver/man-page/privoxy-man-page.html,
+            and should be included along with the manuals. There is also a
+            css stylesheets that can be included for better presentation:
+            p_doc.css. This should be in the same
+            directory with privoxy-index.html,
+            (i.e. one level up from the manual directories).
           
+
           
-            
-              Commit all files
-              that were changed in the above steps!
-            
+            user.action and user.filter are designed for local preferences.
+            Make sure these do not get overwritten! config should not be overwritten either. This has
+            especially important configuration data in it. trust should be left in tact as well.
           
+
           
-            
-              Tag all files in CVS with the version number with "cvs tag v_X_Y_Z". Don't
-              use vX_Y_Z, ver_X_Y_Z, v_X.Y.Z (won't work) etc.
-            
+            Other configuration files (default.action and default.filter) should be installed as the new
+            defaults, but all previously installed configuration files should
+            be preserved as backups. This is just good manners :-) These
+            files are likely to change between releases and contain important
+            new features and bug fixes.
           
+
           
-            
-              If the release was in a development branch, increase the point
-              version from even to odd (X.Y.(Z+1)) again in configure.in and commit your change.
-            
+            Please check platform specific notes in this doc, if you
+            haven't done "Privoxy" packaging
+            before for other platform specific issues. Conversely, please add
+            any notes that you know are important for your platform (or
+            contact one of the doc maintainers to do this if you can't).
           
+
           
-            
-              On the webserver, copy the user manual to a new top-level
-              directory called X.Y.Z. This ensures
-              that help links from the CGI pages, which have the version as a
-              prefix, will go into the right version of the manual. If this
-              is a development branch release, also symlink X.Y.(Z-1) to X.Y.Z
-              and X.Y.(Z+1) to . (i.e. dot).
-            
+            Packagers should do a "clean"
+            install of their package after building it. So any previous
+            installs should be removed first to ensure the integrity of the
+            newly built package. Then run the package for a while to make
+            sure there are no obvious problems, before uploading.
           
         
       
-      
-        
-          6.3. Building and Releasing the Packages
-        
-        
-          Now the individual packages can be built and released. Note that
-          for GPL reasons the first package to be released is always the
-          source tarball.
-        
-        
-          For all types
-          of packages, including the source tarball, you must make sure that you build
-          from clean sources by exporting the right version from CVS into an
-          empty directory (just press return when asked for a
-          password):
-        
-        
-        
-        
+
+      
+        6.3.2. Source Tarball
+
+        First, make sure that you have
+        freshly exported the right version into an empty directory.
+        (See "Building and releasing packages" above). Then run:
+
+        

           
             
--  mkdir dist # delete or choose different name if it already exists
-  cd dist
-  cvs -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa login
-  cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current
+              +  cd current
+  autoheader && autoconf && ./configure
 
             
           
         
 
-        
-          Do NOT change
-          a single bit, including, but not limited to version information
-          after export from CVS. This is to make sure that all release
-          packages, and with them, all future bug reports, are based on
-          exactly the same code.
-        
-        
-          
-            
-              
-            
-            
-              
-            
-          
-                Warning
-              

-                
-                  Every significant release of Privoxy has included at least
-                  one package that either had incorrect versions of files,
-                  missing files, or incidental leftovers from a previous
-                  build process that gave unknown numbers of users headaches
-                  to try to figure out what was wrong. PLEASE, make sure you
-                  are using pristene sources, and are following the
-                  prescribed process!
-                
-              
-        
-        
-          Please find additional instructions for the source tarball and the
-          individual platform dependent binary packages below. And details on
-          the Sourceforge release process below that.
-        
-        
-          
-            6.3.1. Note on Privoxy Packaging
-          
-          
-            Please keep these general guidelines in mind when putting
-            together your package. These apply to all platforms!
-          
-          
-          
-          
-            
-              
-                Privoxy requires write
-                access to: all *.action files, all
-                logfiles, and the trust file. You
-                will need to determine the best way to do this for your
-                platform.
-              
-            
-            
-              
-                Please include up to date documentation. At a bare minimum:
-              
-              
-                
-                  
-                    
-                  
-                
-              
-                      LICENSE (top-level directory)
-                    
-              
-                
-                  
-                    
-                  
-                
-              
-                      README (top-level directory)
-                    
-              
-                
-                  
-                    
-                  
-                
-              
-                      AUTHORS (top-level directory)
-                    
-              
-                
-                  
-                    
-                  
-                
-              
-                      man page (top-level
-                      directory, Unix-like platforms only)
-                    
-              
-                
-                  
-                    
-                  
-                
-              
-                      The User Manual
-                      (doc/webserver/user-manual/)
-                    
-              
-                
-                  
-                    
-                  
-                
-              
-                      FAQ (doc/webserver/faq/)
-                    
-              
-                Also suggested: Developer Manual
-                (doc/webserver/developer-manual) and ChangeLog (top-level directory). FAQ and the manuals are HTML docs. There are
-                also text versions in doc/text/
-                which could conceivably also be included.
-              
-              
-                The documentation has been designed such that the manuals are
-                linked to each other from parallel directories, and should be
-                packaged that way. privoxy-index.html can also be included and
-                can serve as a focal point for docs and other links of
-                interest (and possibly renamed to index.html). This should be one level up from
-                the manuals. There is a link also on this page to an HTMLized
-                version of the man page. To avoid 404 for this, it is in CVS
-                as doc/webserver/man-page/privoxy-man-page.html,
-                and should be included along with the manuals. There is also
-                a css stylesheets that can be included for better
-                presentation: p_doc.css. This
-                should be in the same directory with privoxy-index.html, (i.e. one level up from
-                the manual directories).
-              
-            
-            
-              
-                user.action and user.filter are designed for local
-                preferences. Make sure these do not get overwritten! config should not be overwritten
-                either. This has especially important configuration data in
-                it. trust should be left in tact as
-                well.
-              
-            
-            
-              
-                Other configuration files (default.action and default.filter) should be installed as the
-                new defaults, but all previously installed configuration
-                files should be preserved as backups. This is just good
-                manners :-) These files are likely to change between releases
-                and contain important new features and bug fixes.
-              
-            
-            
-              
-                Please check platform specific notes in this doc, if you
-                haven't done "Privoxy" packaging
-                before for other platform specific issues. Conversely, please
-                add any notes that you know are important for your platform
-                (or contact one of the doc maintainers to do this if you
-                can't).
-              
-            
-            
-              
-                Packagers should do a "clean"
-                install of their package after building it. So any previous
-                installs should be removed first to ensure the integrity of
-                the newly built package. Then run the package for a while to
-                make sure there are no obvious problems, before uploading.
-              
-            
-          
-        
-        
-          
-            6.3.2. Source Tarball
-          
-          
-            First, make sure that
-            you have freshly exported the right version into an empty
-            directory. (See "Building and releasing packages"
-            above). Then run:
-          
-          
-          
-          
-            
-              
-            
-          
--  cd current
-  autoheader && autoconf && ./configure
-
-              
+        Then do:
 
-          
-            Then do:
-          
-          
-          
-          
-            
-              
+          
+        
-+        
+          
+            
-            
-          
+                 make tarball-dist
 
-              
+            
 
-          
-            To upload the package to Sourceforge, simply issue
-          
-          
-          
-          
-            
-              
+          
+        
-+        To upload the package to Sourceforge, simply issue
+
+        
+          
+            
-            
-          
+                 make tarball-upload
 
-              
+            
 
-          
-            Go to the displayed URL and release the file publicly on
-            Sourceforge. For the change log field, use the relevant section
-            of the ChangeLog file.
-          
-        
-        
-          
-            6.3.3. SuSE, Conectiva or Red Hat
-            RPM
-          
-          
-            In following text, replace dist with either "rh" for Red Hat or "suse" for SuSE.
-          
-          
-            First, make sure that
-            you have freshly exported the right version into an empty
-            directory. (See "Building and releasing packages"
-            above).
-          
-          
-            As the only exception to not changing anything after export from
-            CVS, now examine the file privoxy-dist.spec and make sure that the version information
-            and the RPM release number are correct. The RPM release numbers
-            for each version start at one. Hence it must be reset to one if
-            this is the first RPM for dist which is built from version X.Y.Z.
-            Check the file list if unsure. Else, it must be set to
-            the highest already available RPM release number for that version
-            plus one.
-          
-          
-            Then run:
-          
-          
-          
-          
-            
-              
+          
+        
-+        Go to the displayed URL and release the file publicly on
+        Sourceforge. For the change log field, use the relevant section of
+        the ChangeLog file.
+      
+
+      
+        6.3.3.
+        SuSE, Conectiva or Red Hat RPM
+
+        In following text, replace dist
+        with either "rh" for Red Hat or
+        "suse" for SuSE.
+
+        First, make sure that you have
+        freshly exported the right version into an empty directory.
+        (See "Building and releasing packages" above).
+
+        As the only exception to not changing anything after export from
+        CVS, now examine the file privoxy-dist.spec
+        and make sure that the version information and the RPM release number
+        are correct. The RPM release numbers for each version start at one.
+        Hence it must be reset to one if this is the first RPM for dist which is built from version X.Y.Z. Check
+        the file list if unsure. Else, it must be set to the highest
+        already available RPM release number for that version plus one.
+
+        Then run:
+
+        
+          
+            
-            
-          
+                 cd current
   autoheader && autoconf && ./configure
 
-              
+            
 
-          
-            Then do
-          
-          
-          
-          
-            
-              
+          
+        
--  make dist-dist
+        Then do
+
+        
+          
+            
-            
-          
+              +  make dist-dist
 
-              
+            
 
-          
-            To upload the package to Sourceforge, simply issue
-          
-          
-          
-          
-            
-              
+          
+        
--  make dist-upload rpm_packagerev
+        To upload the package to Sourceforge, simply issue
+
+        
+          
+            
-            
-          
+              +  make dist-upload rpm_packagerev
 
-              
+            
 
-          
-            where rpm_packagerev is the
-            RPM release number as determined above. Go to the displayed URL
-            and release the file publicly on Sourceforge. Use the release
-            notes and change log from the source tarball package.
-          
-        
-        
-          
-            6.3.4. OS/2
-          
-          
-            First, make sure that
-            you have freshly exported the right version into an empty
-            directory. (See "Building and releasing packages"
-            above). Then get the OS/2 Setup module:
-          
-          
-          
-          
-            
-              
+          
+        
-+        where rpm_packagerev is the RPM
+        release number as determined above. Go to the displayed URL and
+        release the file publicly on Sourceforge. Use the release notes and
+        change log from the source tarball package.
+      
+
+      
+        6.3.4.
+        OS/2
+
+        First, make sure that you have
+        freshly exported the right version into an empty directory.
+        (See "Building and releasing packages" above). Then get the OS/2
+        Setup module:
+
+        
+          
+            
-            
-          
+                 cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co os2setup
 
-              
+            
 
-          
-            You will need a mix of development tools. The main compilation
-            takes place with IBM Visual Age C++. Some ancillary work takes
-            place with GNU tools, available from various sources like
-            hobbes.nmsu.edu. Specificially, you will need autoheader, autoconf
-            and sh tools. The packaging takes place
-            with WarpIN, available from various sources, including its home
-            page: xworkplace.
-          
-          
-            Change directory to the os2setup
-            directory. Edit the os2build.cmd file to set the final executable
-            filename. For example,
-          
-          
-          
-          
-            
-              
+          
+        
-+        You will need a mix of development tools. The main compilation
+        takes place with IBM Visual Age C++. Some ancillary work takes place
+        with GNU tools, available from various sources like hobbes.nmsu.edu.
+        Specificially, you will need autoheader,
+        autoconf and sh
+        tools. The packaging takes place with WarpIN, available from various
+        sources, including its home page: xworkplace.
+
+        Change directory to the os2setup
+        directory. Edit the os2build.cmd file to set the final executable
+        filename. For example,
+
+        
+          
+            
-            
-          
+                 installExeName='privoxyos2_setup_X.Y.Z.exe'
 
-              
+            
 
-          
-            Next, edit the IJB.wis file so the
-            release number matches in the PACKAGEID
-            section:
-          
-          
-          
-          
-            
-              
+          
+        
-+        Next, edit the IJB.wis file so the
+        release number matches in the PACKAGEID
+        section:
+
+        
+          
+            
-            
-          
+                 PACKAGEID="Privoxy Team\Privoxy\Privoxy Package\X\Y\Z"
 
-              
+            
 
-          
-            You're now ready to build. Run:
-          
-          
-          
-          
-            
-              
+          
+        
-+        You're now ready to build. Run:
+
+        
+          
+            
-            
-          
+                 os2build
 
-              
+            
 
-          
-            You will find the WarpIN-installable executable in the ./files directory. Upload this anonymously to uploads.sourceforge.net/incoming, create a
-            release for it, and you're done. Use the release notes and Change
-            Log from the source tarball package.
-          
-        
-        
-          
-            6.3.5. Solaris
-          
-          
-            Login to Sourceforge's compilefarm via ssh:
-          
-          
-          
-          
-            
-              
+          
+        
-+        You will find the WarpIN-installable executable in the ./files directory. Upload this anonymously to
+        uploads.sourceforge.net/incoming, create a
+        release for it, and you're done. Use the release notes and Change Log
+        from the source tarball package.
+      
+
+      
+        6.3.5. Solaris
+
+        Login to Sourceforge's compilefarm via ssh:
+
+        
+          
+            
-            
-          
+                 ssh cf.sourceforge.net
 
-              
+            
 
-          
-            Choose the right operating system (not the Debian one). When
-            logged in, make sure
-            that you have freshly exported the right version into an empty
-            directory. (See "Building and releasing packages"
-            above). Then run:
-          
-          
-          
-          
-            
-              
+          
+        
-+        Choose the right operating system (not the Debian one). When
+        logged in, make sure that you have
+        freshly exported the right version into an empty directory.
+        (See "Building and releasing packages" above). Then run:
+
+        
+          
+            
-            
-          
+                 cd current
   autoheader && autoconf && ./configure
 
-              
+            
 
-          
-            Then run
-          
-          
-          
-          
-            
-              
+          
+        
-+        Then run
+
+        
+          
+            
-            
-          
+                 gmake solaris-dist
 
-              
+            
 
-          
-            which creates a gzip'ed tar archive. Sadly, you cannot use make solaris-upload on the Sourceforge
-            machine (no ncftpput). You now have to manually upload the
-            archive to Sourceforge's ftp server and release the file
-            publicly. Use the release notes and Change Log from the source
-            tarball package.
-          
-        
-        
-          
-            6.3.6. Windows
-          
-          
-            You should ensure you have the latest version of Cygwin (from http://www.cygwin.com/). Run the following commands
-            from within a Cygwin bash shell.
-          
-          
-            First, make sure that
-            you have freshly exported the right version into an empty
-            directory. (See "Building and releasing packages"
-            above). Then get the Windows setup module:
-          
-          
-          
-          
-            
-              
+          
+        
-+        which creates a gzip'ed tar archive. Sadly, you cannot use
+        make solaris-upload on the Sourceforge machine
+        (no ncftpput). You now have to manually upload the archive to
+        Sourceforge's ftp server and release the file publicly. Use the
+        release notes and Change Log from the source tarball package.
+      
+
+      
+        6.3.6. Windows
+
+        You should ensure you have the latest version of Cygwin (from
+        http://www.cygwin.com/). Run the following commands from
+        within a Cygwin bash shell.
+
+        First, make sure that you have
+        freshly exported the right version into an empty directory.
+        (See "Building and releasing packages" above). Then get the Windows
+        setup module:
+
+        
+          
+            
-            
-          
+                 cvs -z3  -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co winsetup
 
-              
+            
 
-          
-            Then you can build the package. This is fully automated, and is
-            controlled by winsetup/GNUmakefile. All
-            you need to do is:
-          
-          
-          
-          
-            
-              
+          
+        
-+        Then you can build the package. This is fully automated, and is
+        controlled by winsetup/GNUmakefile. All you
+        need to do is:
+
+        
+          
+            
-            
-          
+                 cd winsetup
   make
 
-              
+            
 
-          
-            Now you can manually rename privoxy_setup.exe to privoxy_setup_X_Y_Z.exe, and upload it to
-            SourceForge. When releasing the package on SourceForge, use the
-            release notes and Change Log from the source tarball package.
-          
-        
-        
-          
-            6.3.7. Debian
-          
-          
-            First, make sure that
-            you have freshly exported the right version into an empty
-            directory. (See "Building and releasing packages"
-            above). Then add a log entry to debian/changelog, if it is not already there, for
-            example by running:
-          
-          
-          
-          
-            
-              
+          
+        
--  debchange -v 3.0.18-UNRELEASED-1 "New upstream version"
+        Now you can manually rename privoxy_setup.exe to privoxy_setup_X_Y_Z.exe, and upload it to
+        SourceForge. When releasing the package on SourceForge, use the
+        release notes and Change Log from the source tarball package.
+      
+
+      
+        6.3.7. Debian
+
+        First, make sure that you have
+        freshly exported the right version into an empty directory.
+        (See "Building and releasing packages" above). Then add a log entry
+        to debian/changelog, if it is not already
+        there, for example by running:
+
+        
+          
+            
-            
-          
+              +  debchange -v 3.0.18-stable-1 "New upstream version"
 
-              
+            
 
-          
-            Then, run:
-          
-          
-          
-          
-            
-              
+          
+        
-+        Then, run:
+
+        
+          
+            
-            
-          
+                 dpkg-buildpackage -rfakeroot -us -uc -b
 
-              
+            
 
-          
-            This will create ../privoxy_3.0.18-UNRELEASED-1_i386.deb which can
-            be uploaded. To upload the package to Sourceforge, simply issue
-          
-          
-          
-          
-            
-              
+          
+        
-+        This will create ../privoxy_3.0.18-stable-1_i386.deb which can be
+        uploaded. To upload the package to Sourceforge, simply issue
+
+        
+          
+            
-            
-          
+                 make debian-upload
 
-              
-        
-        
-          
-            6.3.8. Mac OS X
-          
-          
-            First, make sure that
-            you have freshly exported the right version into an empty
-            directory. (See "Building and releasing packages"
-            above). Then get the Mac OS X setup module:
-          
-          
-          
-          
-            
-              
+          
+        
-+            
+      
+
+      
+        6.3.8. Mac OS X
+
+        First, make sure that you have
+        freshly exported the right version into an empty directory.
+        (See "Building and releasing packages" above). Then get the Mac OS X
+        setup module:
+
+        
+          
+            
-            
-          
+                 cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co osxsetup
 
-              
+            
 
-          
-            Then run:
-          
-          
-          
-          
-            
-              
+          
+        
-+        Then run:
+
+        
+          
+            
-            
-          
+                 cd osxsetup
   build
 
-              
+            
 
-          
-            This will run autoheader, autoconf and configure
-            as well as make. Finally, it will copy
-            over the necessary files to the ./osxsetup/files directory for
-            further processing by PackageMaker.
-          
-          
-            Bring up PackageMaker with the PrivoxyPackage.pmsp definition
-            file, modify the package name to match the release, and hit the
-            "Create package" button. If you specify ./Privoxy.pkg as the
-            output package name, you can then create the distributable zip
-            file with the command:
-          
-          
-          
-          
-            
-              
+          
+        
-+        This will run autoheader, autoconf and configure as
+        well as make. Finally, it will copy over
+        the necessary files to the ./osxsetup/files directory for further
+        processing by PackageMaker.
+
+        Bring up PackageMaker with the PrivoxyPackage.pmsp definition
+        file, modify the package name to match the release, and hit the
+        "Create package" button. If you specify ./Privoxy.pkg as the output
+        package name, you can then create the distributable zip file with the
+        command:
+
+        
+          
+            
-            
-          
+                 zip -r privoxyosx_setup_x.y.z.zip Privoxy.pkg
 
-              
+            
 
-          
-            You can then upload privoxyosx_setup_x.y.z.zip anonymously to uploads.sourceforge.net/incoming, create a
-            release for it, and you're done. Use the release notes and Change
-            Log from the source tarball package.
-          
-        
-        
-          
-            6.3.9. FreeBSD
-          
-          
-            Login to Sourceforge's compile-farm via ssh:
-          
-          
-          
-          
-            
-              
+          
+        
-+        You can then upload privoxyosx_setup_x.y.z.zip anonymously to uploads.sourceforge.net/incoming, create a release
+        for it, and you're done. Use the release notes and Change Log from
+        the source tarball package.
+      
+
+      
+        6.3.9. FreeBSD
+
+        Login to Sourceforge's compile-farm via ssh:
+
+        
+          
+            
-            
-          
+                 ssh cf.sourceforge.net
 
-              
+            
 
-          
-            Choose the right operating system. When logged in, make sure that you have freshly
-            exported the right version into an empty directory.
-            (See "Building and releasing packages" above). Then run:
-          
-          
-          
-          
-            
-              
+          
+        
-+        Choose the right operating system. When logged in, make sure that you have freshly exported the
+        right version into an empty directory. (See "Building and
+        releasing packages" above). Then run:
+
+        
+          
+            
-            
-          
+                 cd current
   autoheader && autoconf && ./configure
 
-              
+            
 
-          
-            Then run:
-          
-          
-          
-          
-            
-              
+          
+        
-+        Then run:
+
+        
+          
+            
-            
-          
+                 gmake freebsd-dist
 
-              
+            
 
-          
-            which creates a gzip'ed tar archive. Sadly, you cannot use make freebsd-upload on the Sourceforge
-            machine (no ncftpput). You now have to manually upload the
-            archive to Sourceforge's ftp server and release the file
-            publicly. Use the release notes and Change Log from the source
-            tarball package.
-          
-        
-        
-          
-            6.3.10. HP-UX 11
-          
-          
-            First, make sure that
-            you have freshly exported the right version into an empty
-            directory. (See "Building and releasing packages"
-            above). Then run:
-          
-          
-          
-          
-            
-              
+          
+        
-+        which creates a gzip'ed tar archive. Sadly, you cannot use
+        make freebsd-upload on the Sourceforge machine
+        (no ncftpput). You now have to manually upload the archive to
+        Sourceforge's ftp server and release the file publicly. Use the
+        release notes and Change Log from the source tarball package.
+      
+
+      
+        6.3.10. HP-UX 11
+
+        First, make sure that you have
+        freshly exported the right version into an empty directory.
+        (See "Building and releasing packages" above). Then run:
+
+        
+          
+            
-            
-          
+                 cd current
   autoheader && autoconf && ./configure
 
-              
+            
 
-          
-            Then do FIXME.
-          
-        
-        
-          
-            6.3.11. Amiga OS
-          
-          
-            First, make sure that
-            you have freshly exported the right version into an empty
-            directory. (See "Building and releasing packages"
-            above). Then run:
-          
-          
-          
-          
-            
-              
+          
+        
-+        Then do FIXME.
+      
+
+      
+        6.3.11. Amiga OS
+
+        First, make sure that you have
+        freshly exported the right version into an empty directory.
+        (See "Building and releasing packages" above). Then run:
+
+        
+          
+            
-            
-          
+                 cd current
   autoheader && autoconf && ./configure
 
-              
+            
 
-          
-            Then do FIXME.
-          
-        
-        
-          
-            6.3.12. AIX
-          
-          
-            Login to Sourceforge's compilefarm via ssh:
-          
-          
-          
-          
-            
-              
+          
+        
-+        Then do FIXME.
+      
+
+      
+        6.3.12. AIX
+
+        Login to Sourceforge's compilefarm via ssh:
+
+        
+          
+            
-            
-          
+                 ssh cf.sourceforge.net
 
-              
+            
 
-          
-            Choose the right operating system. When logged in, make sure that you have freshly
-            exported the right version into an empty directory.
-            (See "Building and releasing packages" above). Then run:
-          
-          
-          
-          
-            
-              
+          
+        
-+        Choose the right operating system. When logged in, make sure that you have freshly exported the
+        right version into an empty directory. (See "Building and
+        releasing packages" above). Then run:
+
+        
+          
+            
-            
-          
+                 cd current
   autoheader && autoconf && ./configure
 
-              
+            
 
-          
-            Then run:
-          
-          
-          
-          
-            
-              
+          
+        
-+        Then run:
+
+        
+          
+            
-            
-          
+                 make aix-dist
 
-              
+            
 
-          
-            which creates a gzip'ed tar archive. Sadly, you cannot use make aix-upload on the Sourceforge machine
-            (no ncftpput). You now have to manually upload the archive to
-            Sourceforge's ftp server and release the file publicly. Use the
-            release notes and Change Log from the source tarball package.
-          
-        
+        which creates a gzip'ed tar archive. Sadly, you cannot use
+        make aix-upload on the Sourceforge machine (no
+        ncftpput). You now have to manually upload the archive to
+        Sourceforge's ftp server and release the file publicly. Use the
+        release notes and Change Log from the source tarball package.
       
-      
-        
-          6.4. Uploading and Releasing Your Package
-        
-        
-          After the package is ready, it is time to upload it to SourceForge,
-          and go through the release steps. The upload is done via FTP:
-        
-        
-        
-        
-          
-            
-              Upload to: ftp://upload.sourceforge.net/incoming
-            
-          
-          
-            
-              user: anonymous
-            
-          
-          
-            
-              password: ijbswa-developers@lists.sourceforge.net
-            
-          
-        
+    
 
-        
-          Or use the make targets as described above.
-        
-        
-          Once this done go to https://sourceforge.net/project/admin/editpackages.php?group_id=11118,
-          making sure you are logged in. Find your target platform in the
-          second column, and click Add Release. You
-          will then need to create a new release for your package, using the
-          format of $VERSION ($CODE_STATUS), e.g.
-          3.0.18
-          (beta).
-        
-        
-          Now just follow the prompts. Be sure to add any appropriate Release
-          notes. You should see your freshly uploaded packages in "Step 2. Add Files To This Release". Check the
-          appropriate box(es). Remember at each step to hit the "Refresh/Submit" buttons! You should now see your
-          file(s) listed in Step 3. Fill out the forms with the appropriate
-          information for your platform, being sure to hit "Update" for each file. If anyone is monitoring your
-          platform, check the "email" box at the
-          very bottom to notify them of the new package. This should do it!
-        
-        
-          If you have made errors, or need to make changes, you can go
-          through essentially the same steps, but select Edit Release, instead of Add
-          Release.
-        
-      
-      
-        
-          6.5. After the Release
-        
-        
-          When all (or: most of the) packages have been uploaded and made
-          available, send an email to the announce mailing list, Subject: "Version X.Y.Z available
-          for download". Be sure to include the download location, the release notes and the
-          Changelog. Also, post an updated News item on the project page
-          Sourceforge, and update the Home page and docs linked from the Home
-          page (see below). Other news sites and release oriented sites, such
-          as Freshmeat, should also be notified.
-        
-      
+    
+      6.4. Uploading and
+      Releasing Your Package
+
+      After the package is ready, it is time to upload it to SourceForge,
+      and go through the release steps. The upload is done via FTP:
+
+      
+        
+          Upload to: ftp://upload.sourceforge.net/incoming
+        
+
+        
+          user: anonymous
+        
+
+        
+          password: ijbswa-developers@lists.sourceforge.net
+        
+      
+
+      Or use the make targets as described
+      above.
+
+      Once this done go to https://sourceforge.net/project/admin/editpackages.php?group_id=11118,
+      making sure you are logged in. Find your target platform in the second
+      column, and click Add Release. You will then
+      need to create a new release for your package, using the format of
+      $VERSION ($CODE_STATUS), e.g. 3.0.18 (beta).
+
+      Now just follow the prompts. Be sure to add any appropriate Release
+      notes. You should see your freshly uploaded packages in "Step 2. Add Files To This Release". Check the
+      appropriate box(es). Remember at each step to hit the "Refresh/Submit" buttons! You should now see your
+      file(s) listed in Step 3. Fill out the forms with the appropriate
+      information for your platform, being sure to hit "Update" for each file. If anyone is monitoring your
+      platform, check the "email" box at the very
+      bottom to notify them of the new package. This should do it!
+
+      If you have made errors, or need to make changes, you can go through
+      essentially the same steps, but select Edit
+      Release, instead of Add Release.
     
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-            Prev
-          
-            Home
-          
-            Next
-          

-            Testing Guidelines
-          
-             
-          
-            Update the Webserver
-          
+
+    
+      6.5. After
+      the Release
+
+      When all (or: most of the) packages have been uploaded and made
+      available, send an email to the announce
+      mailing list, Subject: "Version X.Y.Z available for download". Be
+      sure to include the download location, the release notes and the Changelog.
+      Also, post an updated News item on the project page Sourceforge, and
+      update the Home page and docs linked from the Home page (see below).
+      Other news sites and release oriented sites, such as Freshmeat, should
+      also be notified.
     
-  
-
+  
 
+  
+    
+
+    
+      
+        
+
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Testing Guidelines   Update the Webserver
+  
+
+
diff --git a/doc/webserver/developer-manual/seealso.html b/doc/webserver/developer-manual/seealso.html
index 3aba19ea..ee706f56 100644
--- a/doc/webserver/developer-manual/seealso.html
+++ b/doc/webserver/developer-manual/seealso.html
@@ -1,224 +1,204 @@
-
+
+
 
-  
-    
-    
-      See also
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    

+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy Developer Manual
Prev  
+    
+  
+
+  
+    10. See also
+
+    Other references and sites of interest to Privoxy users:
+
+    
+      
-          
+          
+      
+    
         
-            Privoxy Developer Manual
-          http://www.privoxy.org/, the Privoxy Home page.
         
+
+    
+      
-          
-          
-          
+          
-      
         
-            Prev
-          
-          
-             
-          http://www.privoxy.org/faq/, the Privoxy FAQ.
         
-      
-    
-    
-      
-        10. See also
-      
-      
-        Other references and sites of interest to Privoxy users:
-      
-      
-      
-      
-        
-          
-            
-          
-        
-      
-              http://www.privoxy.org/, the Privoxy Home page.
-            
-      
-        
-          
-            
-          
-        
-      
-              http://www.privoxy.org/faq/, the Privoxy FAQ.
-            
-      
-        
-          
-            
-          
-        
-      
-              http://www.privoxy.org/developer-manual/, the Privoxy developer manual.
-            
-      
-        
-          
-            
-          
-        
-      
-              https://sourceforge.net/projects/ijbswa/, the
-              Project Page for Privoxy on SourceForge.
-            
-      
-        
-          
-            
-          
-        
-      
-              http://config.privoxy.org/, the web-based user
-              interface. Privoxy must be
-              running for this to work. Shortcut: http://p.p/
-            
-      
-        
-          
-            
-          
-        
-      
-              https://sourceforge.net/tracker/?group_id=11118&atid=460288,
-              to submit "misses" and other
-              configuration related suggestions to the developers.
-            
-      
-        
-          
-            
-          
-        
-      
-              http://www.junkbusters.com/ht/en/cookies.html, an
-              explanation how cookies are used to track web users.
-            
-      
-        
-          
-            
-          
-        
-      
-              http://www.junkbusters.com/ijb.html, the original
-              Internet Junkbuster.
-            
-      
-        
-          
-            
-          
-        
-      
-              http://www.squid-cache.org/, a popular caching
-              proxy, which is often used together with Privoxy.
-            
-      
-        
-          
-            
-          
-        
-      
-              http://www.pps.jussieu.fr/~jch/software/polipo/,
-              Polipo is a caching proxy with
-              advanced features like pipelining, multiplexing and caching of
-              partial instances. In many setups it can be used as Squid replacement.
-            
-      
-        
-          
-            
-          
-        
-      
-              https://www.torproject.org/, Tor can help anonymize web browsing, web
-              publishing, instant messaging, IRC, SSH, and other
-              applications.
-            
-    
-    
-      
-      
+      
+    
+
+    
+      
-          
-          
-          
+          
+      
+    
         
-            Prev
-          
-            Home
-          
-             
-          http://www.privoxy.org/developer-manual/, the
+          Privoxy developer manual.
         
+
+    
+      
-          
-          
-          
+          
-      
         
-            Privoxy Copyright, License and History
-          
-             
-          
-             
-          https://sourceforge.net/projects/ijbswa/, the Project
+          Page for Privoxy on SourceForge.
         
-    
-  
-
+

+ + + + + + + +

http://config.privoxy.org/, the web-based user + interface. Privoxy must be running + for this to work. Shortcut: http://p.p/

+ + + + + + +

https://sourceforge.net/tracker/?group_id=11118&atid=460288, + to submit "misses" and other + configuration related suggestions to the developers.

+ + + + + + + +

http://www.junkbusters.com/ht/en/cookies.html, an + explanation how cookies are used to track web users.

+ + + + + + + +

http://www.junkbusters.com/ijb.html, the original + Internet Junkbuster.

+ + + + + + + +

http://www.squid-cache.org/, a popular caching proxy, + which is often used together with Privoxy.

+ + + + + + + +

http://www.pps.jussieu.fr/~jch/software/polipo/, + Polipo is a caching proxy with + advanced features like pipelining, multiplexing and caching of + partial instances. In many setups it can be used as Squid replacement.

+ + + + + + + +

https://www.torproject.org/, Tor can help anonymize web browsing, web + publishing, instant messaging, IRC, SSH, and other + applications.

+ +

+ + + + + + + + + + + + + + + + + +

Prev	Home
Privoxy Copyright, License + and History

+ + diff --git a/doc/webserver/developer-manual/testing.html b/doc/webserver/developer-manual/testing.html index bb607456..9f8abf6c 100644 --- a/doc/webserver/developer-manual/testing.html +++ b/doc/webserver/developer-manual/testing.html @@ -1,189 +1,169 @@ - + + - - - - Testing Guidelines - - - - - - - - - - -

- - - - - - - - - -

- Privoxy Developer Manual -
- Prev -	-	- Next -

- 5. Testing Guidelines -

- To be filled. -

- 5.1. Testplan for releases -

- Explain release numbers. major, minor. developer releases. etc. -

-
- Remove any existing rpm with rpm -e -
-
-
- Remove any file that was left over. This includes (but is not - limited to) -
-
- -
  - /var/log/privoxy -
  -
- -
  - /etc/privoxy -
  -
- -
  - /usr/sbin/privoxy -
  -
- -
  - /etc/init.d/privoxy -
  -
- -
  - /usr/doc/privoxy* -
  -
-
-
- Install the rpm. Any error messages? -
-
-
- start,stop,status Privoxy with - the specific script (e.g. /etc/rc.d/init/privoxy stop). Reboot - your machine. Does autostart work? -
-
-
- Start browsing. Does Privoxy - work? Logfile written? -
-
-
- Remove the rpm. Any error messages? All files removed? -
-

- 5.2. Test reports -

- Please submit test reports only with the test form at sourceforge. Three simple steps: -

-
- Select category: the distribution you test on. -
-
-
- Select group: the version of Privoxy that we are about to release. -
-
-
- Fill the Summary and Detailed Description with something - intelligent (keep it short and precise). -
-

- Do not mail to the mailing list (we cannot keep track on issues - there).
-

+ } + :link { color: #0000FF } + :visited { color: #840084 } + :active { color: #0000FF } + hr.c1 {text-align: left} + + + + +

+ + + + + + + + + + + + +

Privoxy Developer Manual
Prev		Next

+ +

5. Testing + Guidelines

+ +

To be filled.

+ +

5.1. + Testplan for releases

+ +

Explain release numbers. major, minor. developer releases. etc.

+ +

+
Remove any existing rpm with rpm -e
+
+
Remove any file that was left over. This includes (but is not + limited to)
+ +
- +
  /var/log/privoxy
  +
- +
  /etc/privoxy
  +
- +
  /usr/sbin/privoxy
  +
- +
  /etc/init.d/privoxy
  +
- +
  /usr/doc/privoxy*
  +
+
+
Install the rpm. Any error messages?
+
+
start,stop,status Privoxy with + the specific script (e.g. /etc/rc.d/init/privoxy stop). Reboot your + machine. Does autostart work?
+
+
Start browsing. Does Privoxy + work? Logfile written?
+
+
Remove the rpm. Any error messages? All files removed?
+

- - - - - - - - - - - -

- Prev -	- Home -	- Next -
- Coding Guidelines -	- -	- Releasing a New Version -

+ +

5.2. + Test reports

+ +

Please submit test reports only with the test form at sourceforge. Three simple steps:

+ +

+
Select category: the distribution you test on.
+
+
Select group: the version of Privoxy that we are about to release.
+
+
Fill the Summary and Detailed Description with something + intelligent (keep it short and precise).
+

Do not mail to the mailing list (we cannot keep track on issues + there).

- - +

+ +

+ + + + + + + + + + + + + + + + +

Prev	Home	Next
Coding Guidelines		Releasing a New + Version

+ + diff --git a/doc/webserver/developer-manual/webserver-update.html b/doc/webserver/developer-manual/webserver-update.html index 50985b83..76b66908 100644 --- a/doc/webserver/developer-manual/webserver-update.html +++ b/doc/webserver/developer-manual/webserver-update.html @@ -1,158 +1,147 @@ - + + - - - - Update the Webserver - - - - - - - - - - -

- - - - - - - - - -

- Privoxy Developer Manual -
- Prev -	-	- Next -

- 7. Update the Webserver -

- The webserver should be updated at least with each stable release. - When updating, please follow these steps to make sure that no broken - links, inconsistent contents or permission problems will occur (as it - has many times in the past!): -

- If you have changed anything in the stable-branch documentation - source SGML files, do: -

- - - + +

+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  span.c3 {font-style: italic}
+  table.c2 {background-color: #E0E0E0}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy Developer Manual
Prev Next
+    
+  
+
+  
+    7.
+    Update the Webserver
+
+    The webserver should be updated at least with each stable release.
+    When updating, please follow these steps to make sure that no broken
+    links, inconsistent contents or permission problems will occur (as it has
+    many times in the past!):
+
+    If you have changed anything in the stable-branch documentation source
+    SGML files, do:
+
+    
+      
+        
-        
-      
+             make dok dok-pdf # (or 'make redhat-dok dok-pdf' if 'make dok' doesn't work for you)
 
-          
-
-      
-        That will generate doc/webserver/user-manual, doc/webserver/developer-manual, doc/webserver/faq, doc/pdf/*.pdf and doc/webserver/index.html automatically.
-      
-      
-        If you changed the manual page sources, generate doc/webserver/man-page/privoxy-man-page.html by
-        running "make man".
-        (This is a separate target due to dependencies on some obscure perl
-        scripts [now in CVS, but not well tested]. See comments in GNUmakefile.)
-      
-      
-        If you want to add new files to the webserver, create them locally in
-        the doc/webserver/* directory (or create
-        new directories under doc/webserver).
-      
-      
-        Next, commit any changes from the above steps to CVS. All set? If
-        these are docs in the stable branch, then do:
-      
-      
-      
-      
-        
-          
+      
+    
-+        
+
+    That will generate doc/webserver/user-manual, doc/webserver/developer-manual, doc/webserver/faq, doc/pdf/*.pdf and doc/webserver/index.html automatically.
+
+    If you changed the manual page sources, generate doc/webserver/man-page/privoxy-man-page.html by running
+    "make man". (This is a
+    separate target due to dependencies on some obscure perl scripts [now in
+    CVS, but not well tested]. See comments in GNUmakefile.)
+
+    If you want to add new files to the webserver, create them locally in
+    the doc/webserver/* directory (or create new
+    directories under doc/webserver).
+
+    Next, commit any changes from the above steps to CVS. All set? If
+    these are docs in the stable branch, then do:
+
+    
+      
+        
-        
-      
+             make webserver
 
-          
-
-      
-        This will do the upload to the webserver (www.privoxy.org) and ensure all files and
-        directories there are group writable.
-      
-      
-        Please do NOT
-        use any other means of transferring files to the webserver to avoid
-        permission problems. Also, please do not upload docs from development
-        branches or versions. The publicly posted docs should be in sync with
-        the last official release.
-      
-    
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-            Prev
-          
-            Home
-          
-            Next
-          

-            Releasing a New Version
-          
-             
-          
-            Contacting the developers, Bug Reporting and Feature Requests
-          
-    
-  
-
+

+ +

This will do the upload to the webserver (www.privoxy.org) and ensure all files and + directories there are group writable.

+ +

Please do NOT use any other + means of transferring files to the webserver to avoid permission + problems. Also, please do not upload docs from development branches or + versions. The publicly posted docs should be in sync with the last + official release.

+ +

+ + + + + + + + + + + + + + + + +

Prev	Home	Next
Releasing a New + Version		Contacting the developers, + Bug Reporting and Feature Requests

+ + diff --git a/doc/webserver/faq/configuration.html b/doc/webserver/faq/configuration.html index 2c19d28e..892e46b1 100644 --- a/doc/webserver/faq/configuration.html +++ b/doc/webserver/faq/configuration.html @@ -1,215 +1,198 @@ - + + - - - - Configuration - - - - - - - - - - -

- - - - - - - - - -

- Privoxy Frequently Asked Questions -
- Prev -	-	- Next -

+ } + :link { color: #0000FF } + :visited { color: #840084 } + :active { color: #0000FF } + a.c4 {font-style: italic} + span.c3 {font-style: italic} + table.c2 {background-color: #E0E0E0} + hr.c1 {text-align: left} + + + + +

+ + + + + + + + + + + + +

Privoxy Frequently Asked + Questions
Prev		Next

+ +

3. + Configuration

+ +

3.1. What exactly is an + "actions" file?

+ +

Privoxy utilizes the concept of + " actions" that are used to manipulate and control web + page data. Actions files are where these actions + that Privoxy could take while + processing a certain request, are configured. Typically, you would + define a set of default actions that apply globally to all URLs, then + add exceptions to these defaults where needed. There is a wide array of + actions available that give the user a high degree of control and + flexibility on how to process each and every web page.

+ +

Actions can be defined on a URL + pattern basis, i.e. for single URLs, whole web sites, groups or + parts thereof etc. Actions can also be grouped together and then + applied to requests matching one or more patterns. There are many + possible actions that might apply to any given site. As an example, if + you are blocking cookies as one of your default actions, but need to + accept cookies from a given site, you would need to define an exception + for this site in one of your actions files, preferably in user.action.

+ +

3.2. The + "actions" concept confuses me. Please list + some of these "actions".

+ +

For a comprehensive discussion of the actions concept, please refer + to the actions + file chapter in the User Manual. It includes a list of all + actions and an actions + file tutorial to get you started.

+ +

3.3. How are actions + files configured? What is the easiest way to do this?

+ +

Actions files are just text files in a special syntax and can be + edited with a text editor. But probably the easiest way is to access + Privoxy's user interface with your web + browser at http://config.privoxy.org/ (Shortcut: http://p.p/) and then select "View & change the current configuration" from the + menu. Note that this feature must be explicitly enabled in the main + config file (see enable-edit-actions).

+ +

3.4. There are several + different "actions" files. What are the + differences?

+ +

Please have a look at the the actions chapter in the User Manual for a + detailed explanation.

- 3. Configuration -

- 3.1. What exactly is an "actions" file? -

- Privoxy utilizes the concept of - " actions" that are used to manipulate and control - web page data. Actions files are where these actions that Privoxy - could take while processing a certain request, are configured. - Typically, you would define a set of default actions that apply - globally to all URLs, then add exceptions to these defaults where - needed. There is a wide array of actions available that give the - user a high degree of control and flexibility on how to process - each and every web page. -

- Actions can be defined on a URL - pattern basis, i.e. for single URLs, whole web sites, groups or - parts thereof etc. Actions can also be grouped together and then - applied to requests matching one or more patterns. There are many - possible actions that might apply to any given site. As an example, - if you are blocking cookies as one of your default actions, but need to - accept cookies from a given site, you would need to define an - exception for this site in one of your actions files, preferably in - user.action. -

- 3.2. The "actions" - concept confuses me. Please list some of these "actions". -

- For a comprehensive discussion of the actions concept, please refer - to the actions file chapter in the User Manual. It - includes a list of all actions and an actions file tutorial to get you started. -

- 3.3. How are actions files configured? What is the - easiest way to do this? -

- Actions files are just text files in a special syntax and can be - edited with a text editor. But probably the easiest way is to - access Privoxy's user interface - with your web browser at http://config.privoxy.org/ (Shortcut: http://p.p/) and then select "View & change the current - configuration" from the menu. Note that this feature - must be explicitly enabled in the main config file (see enable-edit-actions). -

- 3.4. There are several different "actions" files. What are the differences? -

- Please have a look at the the actions - chapter in the User Manual for a detailed explanation. -

- 3.5. Where can I get updated Actions - Files? -

- Based on your feedback and the continuing development, updates of - default.action will be made available - from time to time on the files section of our project page. -

- If you wish to receive an email notification whenever we release - updates of Privoxy or the actions - file, subscribe to our announce mailing list, - ijbswa-announce@lists.sourceforge.net. -

- 3.6. Can I use my old config files? -

- The syntax and purpose of configuration files has remained roughly - the same throughout the 3.x series, but backwards compatibility is - not guaranteed. Also each release contains updated, "improved" versions and it is therefore strongly - recommended to install the newer configuration files and merge back - your modifications. -

- 3.7. Why is the configuration so - complicated? -

- "Complicated" is in the eye of the - beholder. Those that are familiar with some of the underlying - concepts, such as regular expression syntax, take to it like a fish - takes to water. Also, software that tries hard to be "user friendly", often lacks sophistication and - flexibility. There is always that trade-off there between power vs. - easy-of-use. Furthermore, anyone is welcome to contribute ideas and - implementations to enhance Privoxy. -

- 3.8. How can I make my Yahoo/Hotmail/Gmail account - work? -

- The default configuration shouldn't impact the usability of any of - these services. It may, however, make all cookies temporary, so that your browser will forget your - login credentials in between browser sessions. If you would like - not to have to log in manually each time you access those websites, - simply turn off all cookie handling for them in the user.action file. An example for yahoo might look - like: -

- - -

+
+    
+      3.5. Where can I
+      get updated Actions Files?
+
+      Based on your feedback and the continuing development, updates of
+      default.action will be made available from
+      time to time on the files section of our project page.
+
+      If you wish to receive an email notification whenever we release
+      updates of Privoxy or the actions
+      file, subscribe to our announce mailing list,
+      ijbswa-announce@lists.sourceforge.net.
+    
+
+    
+      3.6. Can I use my
+      old config files?
+
+      The syntax and purpose of configuration files has remained roughly
+      the same throughout the 3.x series, but backwards compatibility is not
+      guaranteed. Also each release contains updated, "improved" versions and it is therefore strongly
+      recommended to install the newer configuration files and merge back
+      your modifications.
+    
+
+    
+      3.7. Why is the
+      configuration so complicated?
+
+      "Complicated" is in the eye of the
+      beholder. Those that are familiar with some of the underlying concepts,
+      such as regular expression syntax, take to it like a fish takes to
+      water. Also, software that tries hard to be "user
+      friendly", often lacks sophistication and flexibility. There is
+      always that trade-off there between power vs. easy-of-use. Furthermore,
+      anyone is welcome to contribute ideas and implementations to enhance
+      Privoxy.
+    
+
+    
+      3.8. How can I make my
+      Yahoo/Hotmail/Gmail account work?
+
+      The default configuration shouldn't impact the usability of any of
+      these services. It may, however, make all cookies
+      temporary, so that your browser will forget your login credentials in
+      between browser sessions. If you would like not to have to log in
+      manually each time you access those websites, simply turn off all
+      cookie handling for them in the user.action
+      file. An example for yahoo might look like:
+
+      
+        
+          
-          
-        
+             # Allow all cookies for Yahoo login:
 #
 { -
 "_top">session-cookies-only }
 .login.yahoo.com
 
-            
-
-        
-          These kinds of sites are often quite complex and heavy with Javascript and thus "fragile". So if still a problem, we have an alias
-          just for such sticky situations:
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      These kinds of sites are often quite complex and heavy with Javascript
+      and thus "fragile". So if still a problem, we have an alias just
+      for such sticky situations:
+
+      
+        
+          
-          
-        
+             # Gmail is a _fragile_ site:
 #
 { fragile }
  # Gmail is ...
  mail.google.com
 
-            
-
-        
-          Be sure to flush your browser's caches whenever making these kinds
-          of changes, just to make sure the changes "take".
-        
-        
-          Make sure the domain, host and path are appropriate as well. Your
-          browser can tell you where you are specifically and you should use
-          that information for your configuration settings. Note that above
-          it is not referenced as gmail.com, which
-          is a valid domain name.
-        
-      
-      
-        
-          3.9. What's the difference between the "Cautious", "Medium" and "Advanced"
-          defaults?
-        
-        
-          Configuring Privoxy is not
-          entirely trivial. To help you get started, we provide you with
-          three different default action "profiles" in the web based actions file editor at
-          http://config.privoxy.org/show-status. See the User Manual for a list of actions, and how the
-          default profiles are set.
-        
-        
-          Where the defaults are likely to break some sites, exceptions for
-          known popular "problem" sites are
-          included, but in general, the more aggressive your default settings
-          are, the more exceptions you will have to make later. New users are
-          best to start off in "Cautious" setting.
-          This is safest and will have the fewest problems. See the User
-          Manual for a more detailed discussion.
-        
-        
-          It should be noted that the "Advanced"
-          profile (formerly known as the "Adventuresome" profile) is more aggressive, and
-          will make use of some of Privoxy's
-          advanced features. Use at your own risk!
-        
-      
-      
-        
-          3.10. Why can I change the configuration
-          with a browser? Does that not raise security issues?
-        
-        
-          It may seem strange that regular users can edit the config files
-          with their browsers, although the whole /etc/privoxy hierarchy belongs to the user "privoxy", with only 644 permissions.
-        
-        
-          When you use the browser-based editor, Privoxy itself is writing to the config files.
-          Because Privoxy is running as the
-          user "privoxy", it can update its own
-          config files.
-        
-        
-          If you run Privoxy for multiple
-          untrusted users (e.g. in a LAN) or aren't entirely in control of
-          your own browser, you will probably want to make sure that the
-          web-based editor and remote toggle features are "off" by setting "enable-edit-actions 0" and "enable-remote-toggle 0" in the main configuration
-          file.
-        
-        
-          As of Privoxy 3.0.7 these options
-          are disabled by default.
-        
-      
-      
-        
-          3.11. What is the default.filter file? What is a "filter"?
-        
-        
-          The default.filter file is where filters as supplied by
-          the developers are defined. Filters are a special subset of actions
-          that can be used to modify or remove web page content or headers on
-          the fly. Content filters can be applied to anything in the page
-          source, header filters can be applied to either server or client
-          headers. Regular expressions are used to accomplish this.
-        
-        
-          There are a number of pre-defined filters to deal with common
-          annoyances. The filters are only defined here, to invoke them, you
-          need to use the filter action in one of
-          the actions files. Content filtering is automatically disabled for
-          inappropriate MIME types, but if you know better than Privoxy what
-          should or should not be filtered you can filter any content you
-          like.
-        
-        
-          Filters should not be confused with blocks, which is a completely different action,
-          and is more typically used to block ads and unwanted sites.
-        
-        
-          If you are familiar with regular expressions, and HTML, you can
-          look at the provided default.filter with
-          a text editor and define your own filters. This is potentially a
-          very powerful feature, but requires some expertise in both regular
-          expressions and HTML/HTTP. You should place any modifications to
-          the default filters, or any new ones you create in a separate file,
-          such as user.filter, so they won't be
-          overwritten during upgrades. The ability to define multiple filter
-          files in config is a new feature as of v.
-          3.0.5.
-        
-        
-          There is no GUI editor option for this part of the configuration,
-          but you can disable/enable the various pre-defined filters of the
-          included default.filter file with the web-based actions file editor. Note that the custom
-          actions editor must be explicitly enabled in the main config file
-          (see enable-edit-actions).
-        
-        
-          If you intend to develop your own filters, you might want to have a
-          look at Privoxy-Filter-Test.
-        
-      
-      
-        
-          3.12. How can I set up Privoxy to act as a
-          proxy for my LAN?
-        
-        
-          By default, Privoxy only responds
-          to requests from 127.0.0.1 (localhost). To
-          have it act as a server for a network, this needs to be changed in
-          the main
-          configuration file. Look for the listen-address option, which may be commented out
-          with a "#" symbol. Make sure it is
-          uncommented, and assign it the address of the LAN gateway
-          interface, and port number to use. Assuming your LAN address is
-          192.168.1.1 and you wish to run Privoxy on port 8118, this line should look
-          like:
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      Be sure to flush your browser's caches whenever making these kinds
+      of changes, just to make sure the changes "take".
+
+      Make sure the domain, host and path are appropriate as well. Your
+      browser can tell you where you are specifically and you should use that
+      information for your configuration settings. Note that above it is not
+      referenced as gmail.com, which is a valid
+      domain name.
+    
+
+    
+      3.9. What's
+      the difference between the "Cautious",
+      "Medium" and "Advanced" defaults?
+
+      Configuring Privoxy is not entirely
+      trivial. To help you get started, we provide you with three different
+      default action "profiles" in the web based
+      actions file editor at http://config.privoxy.org/show-status. See the
+      User Manual for a list of actions, and how the default
+      profiles are set.
+
+      Where the defaults are likely to break some sites, exceptions for
+      known popular "problem" sites are included,
+      but in general, the more aggressive your default settings are, the more
+      exceptions you will have to make later. New users are best to start off
+      in "Cautious" setting. This is safest and
+      will have the fewest problems. See the User Manual for a more
+      detailed discussion.
+
+      It should be noted that the "Advanced"
+      profile (formerly known as the "Adventuresome" profile) is more aggressive, and will
+      make use of some of Privoxy's advanced
+      features. Use at your own risk!
+    
+
+    
+      3.10. Why
+      can I change the configuration with a browser? Does that not raise
+      security issues?
+
+      It may seem strange that regular users can edit the config files
+      with their browsers, although the whole /etc/privoxy hierarchy belongs to the user "privoxy", with only 644 permissions.
+
+      When you use the browser-based editor, Privoxy itself is writing to the config files.
+      Because Privoxy is running as the user
+      "privoxy", it can update its own config
+      files.
+
+      If you run Privoxy for multiple
+      untrusted users (e.g. in a LAN) or aren't entirely in control of your
+      own browser, you will probably want to make sure that the web-based
+      editor and remote toggle features are "off"
+      by setting "enable-edit-actions 0" and "enable-remote-toggle 0" in the main configuration
+      file.
+
+      As of Privoxy 3.0.7 these options
+      are disabled by default.
+    
+
+    
+      3.11. What is the
+      default.filter file? What is a "filter"?
+
+      The default.filter file is where
+      filters as supplied by the
+      developers are defined. Filters are a special subset of actions that
+      can be used to modify or remove web page content or headers on the fly.
+      Content filters can be applied to anything in the page source, header
+      filters can be applied to either server or client headers. Regular
+      expressions are used to accomplish this.
+
+      There are a number of pre-defined filters to deal with common
+      annoyances. The filters are only defined here, to invoke them, you need
+      to use the filter action in one of the actions
+      files. Content filtering is automatically disabled for inappropriate
+      MIME types, but if you know better than Privoxy what should or should
+      not be filtered you can filter any content you like.
+
+      Filters should not be
+      confused with blocks, which is a completely
+      different action, and is more typically used to block ads and unwanted
+      sites.
+
+      If you are familiar with regular expressions, and HTML, you can look
+      at the provided default.filter with a text
+      editor and define your own filters. This is potentially a very powerful
+      feature, but requires some expertise in both regular expressions and
+      HTML/HTTP. You should place any modifications to the default filters,
+      or any new ones you create in a separate file, such as user.filter, so they won't be overwritten during
+      upgrades. The ability to define multiple filter files in config is a new feature as of v. 3.0.5.
+
+      There is no GUI editor option for this part of the configuration,
+      but you can disable/enable the various pre-defined filters of the
+      included default.filter file with the
+      web-based
+      actions file editor. Note that the custom actions editor must be
+      explicitly enabled in the main config file (see enable-edit-actions).
+
+      If you intend to develop your own filters, you might want to have a
+      look at Privoxy-Filter-Test.
+    
+
+    
+      3.12. How can I
+      set up Privoxy to act as a proxy for my LAN?
+
+      By default, Privoxy only responds
+      to requests from 127.0.0.1 (localhost). To
+      have it act as a server for a network, this needs to be changed in the
+      main configuration
+      file. Look for the listen-address option, which may be commented out with
+      a "#" symbol. Make sure it is uncommented,
+      and assign it the address of the LAN gateway interface, and port number
+      to use. Assuming your LAN address is 192.168.1.1 and you wish to run
+      Privoxy on port 8118, this line should
+      look like:
+
+      
+        
+          
-          
-        
+               listen-address  192.168.1.1:8118
 
-            
-
-        
-          Save the file, and restart Privoxy. Configure all browsers on the network
-          then to use this address and port number.
-        
-        
-          Alternately, you can have Privoxy
-          listen on all available interfaces:
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      Save the file, and restart Privoxy.
+      Configure all browsers on the network then to use this address and port
+      number.
+
+      Alternately, you can have Privoxy
+      listen on all available interfaces:
+
+      
+        
+          
-          
-        
+               listen-address    :8118
 
-            
-
-        
-          And then use Privoxy's permit-access feature to limit connections. A firewall
-          in this situation is recommended as well.
-        
-        
-          The above steps should be the same for any TCP network, regardless
-          of operating system.
-        
-        
-          If you run Privoxy on a LAN with
-          untrusted users, we recommend that you double-check the access
-          control and security options!
-        
-      
-      
-        
-          3.13. Instead of ads, now I get a checkerboard
-          pattern. I don't want to see anything.
-        
-        
-          The replacement for blocked images can be controlled with the set-image-blocker action. You
-          have the choice of a checkerboard pattern, a transparent 1x1 GIF
-          image (aka "blank"), or a redirect to a
-          custom image of your choice. Note that this choice only has effect
-          for images which are blocked as images, i.e. whose URLs match both
-          a handle-as-image and block action.
-        
-        
-          If you want to see nothing, then change the set-image-blocker action to
-          "blank". This can be done by editing the
-          user.action file, or through the web-based
-          actions file editor.
-        
-      
-      
-        
-          3.14. Why would anybody want to see a checkerboard
-          pattern?
-        
-        
-          Remember that telling which image
-          is an ad and which isn't, is an educated guess. While we hope
-          that the standard configuration is rather smart, it will make
-          occasional mistakes. The checkerboard image is visually decent, and
-          it shows you where images have been blocked, which can be very
-          helpful in case some navigation aid or otherwise innocent image was
-          erroneously blocked. It is recommended for new users so they can
-          "see" what is happening. Some people
-          might also enjoy seeing how many banners they don't have to see.
-        
-      
-      
-        
-          3.15. I see some images being replaced with text
-          instead of the checkerboard image. Why and how do I get rid of
-          this?
-        
-        
-          This happens when the banners are not embedded in the HTML code of
-          the page itself, but in separate HTML (sub)documents that are
-          loaded into (i)frames or (i)layers, and these external HTML
-          documents are blocked. Being non-images they get replaced by a
-          substitute HTML page rather than a substitute image, which wouldn't
-          work out technically, since the browser expects and accepts only
-          HTML when it has requested an HTML document.
-        
-        
-          The substitute page adapts to the available space and shows itself
-          as a miniature two-liner if loaded into small frames, or full-blown
-          with a large red "BLOCKED" banner if space allows.
-        
-        
-          If you prefer the banners to be blocked by images, you must see to
-          it that the HTML documents in which they are embedded are not
-          blocked. Clicking the "See why" link
-          offered in the substitute page will show you which rule blocked the
-          page. After changing the rule and un-blocking the HTML documents,
-          the browser will try to load the actual banner images and the usual
-          image blocking will (hopefully!) kick in.
-        
-      
-      
-        
-          3.16. Can Privoxy run as a service on
-          Win2K/NT/XP?
-        
-        
-          Yes. Version 3.0.5 introduces full Windows service functionality. See the User Manual for details on
-          how to install and configure Privoxy as a service.
-        
-        
-          Earlier 3.x versions could run as a system service using srvany.exe. See the discussion at http://sourceforge.net/tracker/?func=detail&atid=361118&aid=485617&group_id=11118,
-          for details, and a sample configuration.
-        
-      
-      
-        
-          3.17. How can I make Privoxy work with other
-          proxies?
-        
-        
-          This can be done and is often useful to combine the benefits of
-          Privoxy with those of a another
-          proxy, for example to cache content. See the forwarding
-          chapter in the User Manual which describes how to do this. If you
-          intend to use Privoxy with Tor, please also have a look at How do I use Privoxy together with Tor.
-        
-      
-      
-        
-          3.18. Can I just set Privoxy to use port 80 and
-          thus avoid individual browser configuration?
-        
-        
-          No, its more complicated than that. This only works with special
-          kinds of proxies known as "intercepting"
-          proxies (see below).
-        
-      
-      
-        
-          3.19. Can Privoxy run as a "transparent" proxy?
-        
-        
-          The whole idea of Privoxy is to modify client requests and server
-          responses in all sorts of ways and therefore it's not a transparent
-          proxy as described in RFC 2616.
-        
-        
-          However, some people say "transparent
-          proxy" when they mean "intercepting
-          proxy". If you are one of them, please read the next entry.
-        
-      
-      
-        
-          3.20. Can Privoxy run as a "intercepting" proxy?
-        
-        
-          Privoxy can't intercept traffic
-          itself, but it can handle requests that where intercepted and
-          redirected with a packet filter (like PF or iptables), as long as the Host header is present.
-        
-        
-          As the Host header is required by HTTP/1.1
-          and as most web sites rely on it anyway, this limitation shouldn't
-          be a problem.
-        
-        
-          Please refer to your packet filter's documentation to learn how to
-          intercept and redirect traffic into Privoxy. Afterward you just have to configure
-          Privoxy to accept intercepted requests.
-        
-      
-      
-        
-          3.21. How can I configure Privoxy for use with
-          Outlook?
-        
-        
-          Versions of Outlook prior to
-          Office 2007, use Internet Explorer
-          components to both render HTML, and fetch any HTTP requests that
-          may be embedded in an HTML email. So however you have Privoxy configured to work with IE, this
-          configuration should automatically be shared, at least with older
-          version of Internet Explorer.
-        
-        
-          Starting with Office 2007, Microsoft is instead using the MS-Word
-          rendering engine with Outlook. It is unknown whether this can be
-          configured to use a proxy.
-        
-      
-      
-        
-          3.22. How can I have separate rules just for
-          HTML mail?
-        
-        
-          The short answer is, you can't. Privoxy has no way of knowing which particular
-          application makes a request, so there is no way to distinguish
-          between web pages and HTML mail. Privoxy just blindly proxies all requests. In
-          the case of Outlook Express (see
-          above), OE uses IE anyway, and there is no way for Privoxy to ever be able to distinguish between
-          them (nor could any other proxy type application for that matter).
-        
-        
-          For a good discussion of some of the issues involved (including
-          privacy and security issues), see http://sourceforge.net/tracker/?func=detail&atid=211118&aid=629518&group_id=11118.
-        
-      
-      
-        
-          3.23. I sometimes notice cookies sneaking
-          through. How?
-        
-        
-          Cookies can be set in several ways. The classic method
-          is via the Set-Cookie HTTP header. This is
-          straightforward, and an easy one to manipulate, such as the Privoxy concept of session-cookies-only. There is also the possibility of
-          using Javascript to set cookies (Privoxy calls these content-cookies). This is trickier because the
-          syntax can vary widely, and thus requires a certain amount of
-          guesswork. It is not realistic to catch all of these short of
-          disabling Javascript, which would break many sites. And lastly, if
-          the cookies are embedded in a HTTPS/SSL secure session via
-          Javascript, they are beyond Privoxy's reach.
-        
-        
-          All in all, Privoxy can help
-          manage cookies in general, can help minimize the loss of privacy
-          posed by cookies, but can't realistically stop all cookies.
-        
-      
-      
-        
-          3.24. Are all cookies bad? Why?
-        
-        
-          No, in fact there are many beneficial uses of cookies. Cookies are just a method that browsers can use
-          to store data between pages, or between browser sessions. Sometimes
-          there is a good reason for this, and the user's life is a bit
-          easier as a result. But there is a long history of some websites
-          taking advantage of this layer of trust, and using the data they
-          glean from you and your browsing habits for their own purposes, and
-          maybe to your potential detriment. Such sites are using you and
-          storing their data on your system. That is why the privacy
-          conscious watch from whom those cookies come, and why they really
-          need to be
-          there.
-        
-        
-          See the Wikipedia cookie definition for more.
-        
-      
-      
-        
-          3.25. How can I allow permanent cookies for
-          my trusted sites?
-        
-        
-          There are several actions that relate to cookies. The default
-          behavior is to allow only "session
-          cookies", which means the cookies only last for the current
-          browser session. This eliminates most kinds of abuse related to
-          cookies. But there may be cases where you want cookies to last.
-        
-        
-          To disable all cookie actions, so that cookies are allowed
-          unrestricted, both in and out, for example.com:
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      And then use Privoxy's permit-access feature to limit connections. A firewall in
+      this situation is recommended as well.
+
+      The above steps should be the same for any TCP network, regardless
+      of operating system.
+
+      If you run Privoxy on a LAN with
+      untrusted users, we recommend that you double-check the access
+      control and security options!
+    
+
+    
+      3.13. Instead of ads,
+      now I get a checkerboard pattern. I don't want to see
+      anything.
+
+      The replacement for blocked images can be controlled with the
+      set-image-blocker action. You have
+      the choice of a checkerboard pattern, a transparent 1x1 GIF image (aka
+      "blank"), or a redirect to a custom image of
+      your choice. Note that this choice only has effect for images which are
+      blocked as images, i.e. whose URLs match both a handle-as-image and block
+      action.
+
+      If you want to see nothing, then change the set-image-blocker action to
+      "blank". This can be done by editing the
+      user.action file, or through the web-based actions
+      file editor.
+    
+
+    
+      3.14. Why would anybody
+      want to see a checkerboard pattern?
+
+      Remember that telling which image
+      is an ad and which isn't, is an educated guess. While we hope that
+      the standard configuration is rather smart, it will make occasional
+      mistakes. The checkerboard image is visually decent, and it shows you
+      where images have been blocked, which can be very helpful in case some
+      navigation aid or otherwise innocent image was erroneously blocked. It
+      is recommended for new users so they can "see" what is happening. Some people might also enjoy
+      seeing how many banners they don't have to see.
+    
+
+    
+      3.15. I see some images
+      being replaced with text instead of the checkerboard image. Why and how
+      do I get rid of this?
+
+      This happens when the banners are not embedded in the HTML code of
+      the page itself, but in separate HTML (sub)documents that are loaded
+      into (i)frames or (i)layers, and these external HTML documents are
+      blocked. Being non-images they get replaced by a substitute HTML page
+      rather than a substitute image, which wouldn't work out technically,
+      since the browser expects and accepts only HTML when it has requested
+      an HTML document.
+
+      The substitute page adapts to the available space and shows itself
+      as a miniature two-liner if loaded into small frames, or full-blown
+      with a large red "BLOCKED" banner if space allows.
+
+      If you prefer the banners to be blocked by images, you must see to
+      it that the HTML documents in which they are embedded are not blocked.
+      Clicking the "See why" link offered in the
+      substitute page will show you which rule blocked the page. After
+      changing the rule and un-blocking the HTML documents, the browser will
+      try to load the actual banner images and the usual image blocking will
+      (hopefully!) kick in.
+    
+
+    
+      3.16. Can Privoxy run as
+      a service on Win2K/NT/XP?
+
+      Yes. Version 3.0.5 introduces full Windows service functionality. See the User Manual for details on how
+      to install and configure Privoxy as a
+      service.
+
+      Earlier 3.x versions could run as a system service using srvany.exe. See the discussion at http://sourceforge.net/tracker/?func=detail&atid=361118&aid=485617&group_id=11118,
+      for details, and a sample configuration.
+    
+
+    
+      3.17. How can I
+      make Privoxy work with other proxies?
+
+      This can be done and is often useful to combine the benefits of
+      Privoxy with those of a another proxy,
+      for example to cache content. See the forwarding
+      chapter in the User Manual which describes how to do this. If you intend to
+      use Privoxy with Tor, please also have a look at How do I use Privoxy together with Tor.
+    
+
+    
+      3.18. Can I just set
+      Privoxy to use port 80 and thus avoid individual browser
+      configuration?
+
+      No, its more complicated than that. This only works with special
+      kinds of proxies known as "intercepting"
+      proxies (see below).
+    
+
+    
+      3.19. Can
+      Privoxy run as a "transparent"
+      proxy?
+
+      The whole idea of Privoxy is to modify client requests and server
+      responses in all sorts of ways and therefore it's not a transparent
+      proxy as described in RFC 2616.
+
+      However, some people say "transparent
+      proxy" when they mean "intercepting
+      proxy". If you are one of them, please read the next entry.
+    
+
+    
+      3.20. Can
+      Privoxy run as a "intercepting"
+      proxy?
+
+      Privoxy can't intercept traffic
+      itself, but it can handle requests that where intercepted and
+      redirected with a packet filter (like PF or iptables),
+      as long as the Host header is present.
+
+      As the Host header is required by HTTP/1.1
+      and as most web sites rely on it anyway, this limitation shouldn't be a
+      problem.
+
+      Please refer to your packet filter's documentation to learn how to
+      intercept and redirect traffic into Privoxy. Afterward you just have to configure
+      Privoxy to accept intercepted requests.
+    
+
+    
+      3.21. How can I
+      configure Privoxy for use with Outlook?
+
+      Versions of Outlook prior to Office
+      2007, use Internet Explorer components
+      to both render HTML, and fetch any HTTP requests that may be embedded
+      in an HTML email. So however you have Privoxy configured to work with IE, this
+      configuration should automatically be shared, at least with older
+      version of Internet Explorer.
+
+      Starting with Office 2007, Microsoft is instead using the MS-Word
+      rendering engine with Outlook. It is unknown whether this can be
+      configured to use a proxy.
+    
+
+    
+      3.22. How
+      can I have separate rules just for HTML mail?
+
+      The short answer is, you can't. Privoxy has no way of knowing which particular
+      application makes a request, so there is no way to distinguish between
+      web pages and HTML mail. Privoxy just
+      blindly proxies all requests. In the case of Outlook Express (see above), OE uses IE anyway,
+      and there is no way for Privoxy to
+      ever be able to distinguish between them (nor could any other proxy
+      type application for that matter).
+
+      For a good discussion of some of the issues involved (including
+      privacy and security issues), see http://sourceforge.net/tracker/?func=detail&atid=211118&aid=629518&group_id=11118.
+    
+
+    
+      3.23. I
+      sometimes notice cookies sneaking through. How?
+
+      Cookies can be set in several ways. The classic method is
+      via the Set-Cookie HTTP header. This is
+      straightforward, and an easy one to manipulate, such as the
+      Privoxy concept of session-cookies-only. There is also the possibility of using
+      Javascript to set cookies (Privoxy calls these content-cookies). This is trickier because the syntax
+      can vary widely, and thus requires a certain amount of guesswork. It is
+      not realistic to catch all of these short of disabling Javascript,
+      which would break many sites. And lastly, if the cookies are embedded
+      in a HTTPS/SSL secure session via Javascript, they are beyond
+      Privoxy's reach.
+
+      All in all, Privoxy can help manage
+      cookies in general, can help minimize the loss of privacy posed by
+      cookies, but can't realistically stop all cookies.
+    
+
+    
+      3.24. Are
+      all cookies bad? Why?
+
+      No, in fact there are many beneficial uses of cookies. Cookies are just a method that browsers can use to
+      store data between pages, or between browser sessions. Sometimes there
+      is a good reason for this, and the user's life is a bit easier as a
+      result. But there is a long history of some websites taking advantage
+      of this layer of trust, and using the data they glean from you and your
+      browsing habits for their own purposes, and maybe to your potential
+      detriment. Such sites are using you and storing their data on your
+      system. That is why the privacy conscious watch from whom those cookies
+      come, and why they really need to be there.
+
+      See the Wikipedia cookie definition for more.
+    
+
+    
+      3.25. How
+      can I allow permanent cookies for my trusted sites?
+
+      There are several actions that relate to cookies. The default
+      behavior is to allow only "session cookies",
+      which means the cookies only last for the current browser session. This
+      eliminates most kinds of abuse related to cookies. But there may be
+      cases where you want cookies to last.
+
+      To disable all cookie actions, so that cookies are allowed
+      unrestricted, both in and out, for example.com:
+
+      
+        
+          
-          
-        
+              { -crunch-incoming-cookies -crunch-outgoing-cookies -session-cookies-only -filter{content-cookies} }
   .example.com
 
-            
-
-        
-          Place the above in user.action. Note that
-          some of these may be off by default anyway, so this might be
-          redundant, but there is no harm being explicit in what you want to
-          happen. user.action includes an alias for
-          this situation, called allow-all-cookies.
-        
-      
-      
-        
-          3.26. Can I have separate configurations for
-          different users?
-        
-        
-          Each instance of Privoxy has its
-          own configuration, including such attributes as the TCP port that
-          it listens on. What you can do is run multiple instances of Privoxy, each with a unique listen-address configuration setting, and configuration
-          path, and then each of these can have their own configurations.
-          Think of it as per-port configuration.
-        
-        
-          Simple enough for a few users, but for large installations,
-          consider having groups of users that might share like
-          configurations.
-        
-      
-      
-        
-          3.27. Can I set-up Privoxy as a whitelist of
-          "good" sites?
-        
-        
-          Sure. There are a couple of things you can do for simple
-          white-listing. Here's one real easy one:
-        
-        
-          
-            
+        
+      
-+          
+
+      Place the above in user.action. Note that
+      some of these may be off by default anyway, so this might be redundant,
+      but there is no harm being explicit in what you want to happen.
+      user.action includes an alias for this
+      situation, called allow-all-cookies.
+    
+
+    
+      3.26. Can I have
+      separate configurations for different users?
+
+      Each instance of Privoxy has its
+      own configuration, including such attributes as the TCP port that it
+      listens on. What you can do is run multiple instances of Privoxy, each with a unique listen-address configuration setting, and configuration
+      path, and then each of these can have their own configurations. Think
+      of it as per-port configuration.
+
+      Simple enough for a few users, but for large installations, consider
+      having groups of users that might share like configurations.
+    
+
+    
+      3.27. Can I
+      set-up Privoxy as a whitelist of "good"
+      sites?
+
+      Sure. There are a couple of things you can do for simple
+      white-listing. Here's one real easy one:
+
+      
+        
+          
-          
-        
+              ############################################################
  # Blacklist
  ############################################################
@@ -825,83 +727,71 @@ Transitional//EN""http://www.w3.org/TR/html4/loose.dtd">
   toys.example.com
   games.example.com
 
-            
-        
-          This allows access to only those three sites by first blocking all
-          URLs, and then subsequently allowing three specific exceptions.
-        
-        
-          Another approach is Privoxy's trustfile concept, which incorporates the
-          notion of "trusted referrers". See the
-          Trust
-          documentation for details.
-        
-        
-          These are fairly simple approaches and are not completely
-          foolproof. There are various other configuration options that
-          should be disabled (described elsewhere here and in the User Manual) so that users
-          can't modify their own configuration and easily circumvent the
-          whitelist.
-        
-      
-      
-        
-          3.28. How can I turn off ad-blocking?
-        
-        
-          Ad blocking is achieved through a complex application of various
-          Privoxy actions. These
-          actions are deployed against simple images, banners, flash
-          animations, text pages, JavaScript, pop-ups and pop-unders, etc.,
-          so its not as simple as just turning one or two actions off. The
-          various actions that make up Privoxy ad blocking are hard-coded into the
-          default configuration files. It has been assumed that everyone
-          using Privoxy is interested in
-          this particular feature.
-        
-        
-          If you want to do without this, there are several approaches you
-          can take: You can manually undo the many block rules in default.action. Or even easier, just create your
-          own default.action file from scratch
-          without the many ad blocking rules, and corresponding exceptions.
-          Or lastly, if you are not concerned about the additional blocks
-          that are done for privacy reasons, you can very easily over-ride
-          all blocking
-          with the following very simple rule in your user.action:
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      This allows access to only those three sites by first blocking all
+      URLs, and then subsequently allowing three specific exceptions.
+
+      Another approach is Privoxy's
+      trustfile concept, which incorporates the
+      notion of "trusted referrers". See the
+      Trust
+      documentation for details.
+
+      These are fairly simple approaches and are not completely foolproof.
+      There are various other configuration options that should be disabled
+      (described elsewhere here and in the User Manual) so that users can't modify their own
+      configuration and easily circumvent the whitelist.
+    
+
+    
+      3.28. How can I
+      turn off ad-blocking?
+
+      Ad blocking is achieved through a complex application of various
+      Privoxy actions. These
+      actions are deployed against simple images, banners, flash animations,
+      text pages, JavaScript, pop-ups and pop-unders, etc., so its not as
+      simple as just turning one or two actions off. The various actions that
+      make up Privoxy ad blocking are
+      hard-coded into the default configuration files. It has been assumed
+      that everyone using Privoxy is
+      interested in this particular feature.
+
+      If you want to do without this, there are several approaches you can
+      take: You can manually undo the many block rules in default.action. Or even easier, just create your own
+      default.action file from scratch without the
+      many ad blocking rules, and corresponding exceptions. Or lastly, if you
+      are not concerned about the additional blocks that are done for privacy
+      reasons, you can very easily over-ride all blocking with the following very
+      simple rule in your user.action:
+
+      
+        
+          
-          
-        
+              # Unblock everybody, everywhere
  { -block }
  / # UN-Block *all* URLs
 
-            
-
-        
-          Or even a more comprehensive reversing of various ad related
-          actions:
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      Or even a more comprehensive reversing of various ad related
+      actions:
+
+      
+        
+          
-          
-        
+              # Unblock everybody, everywhere, and turn off appropriate filtering, etc
  { -block \
@@ -913,115 +803,98 @@ Transitional//EN""http://www.w3.org/TR/html4/loose.dtd">
  }
  / # UN-Block *all* URLs and allow ads
 
-            
-
-        
-          This last "action" in this compound
-          statement, allow-popups, is an alias
-          that disables various pop-up blocking features.
-        
-      
-      
-        
-          3.29. How can I have custom template pages,
-          like the BLOCKED page?
-        
-        
-          Privoxy "templates" are specialized text files utilized by
-          Privoxy for various purposes and
-          can easily be modified using any text editor. All the template
-          pages are installed in a sub-directory appropriately named: templates. Knowing something about HTML
-          syntax will of course be helpful.
-        
-        
-          Be forewarned that the default templates are subject to being
-          overwritten during upgrades. You can, however, create completely
-          new templates, place them in another directory and specify the
-          alternate path in the main config. For
-          details, have a look at the templdir
-          option.
-        
-      
-      
-        
-          3.30. How can I remove the "Go There Anyway" link from the BLOCKED page?
-        
-        
-          There is more than one way to do it (although Perl is not
-          involved).
-        
-        
-          Editing the BLOCKED template page (see above) may dissuade some
-          users, but this method is easily circumvented. Where you need this
-          level of control, you might want to build Privoxy from source, and disable various
-          features that are available as compile-time options. You should configure the sources as follows:
-        
-        
-        
-        
-          
-            
-          
-        
-- ./configure  --disable-toggle  --disable-editor  --disable-force
-
-            
-
-        
-          This will create an executable with hard-coded security features so
-          that Privoxy does not allow easy
-          bypassing of blocked sites, or changing the current configuration
-          via any connected user's web browser.
-        
-        
-          Finally, all of these features can also be toggled on/off via
-          options in Privoxy's main config file which means you don't have to recompile
-          anything.
-        
-      
-    
-    
-      
-      
-        
-          
-          
-          
+      
-            Prev
-          
-            Home
-          
-            Next
           
         
+
+      This last "action" in this compound
+      statement, allow-popups, is an alias that
+      disables various pop-up blocking features.
+    
+
+    
+      3.29. How can I
+      have custom template pages, like the BLOCKED page?
+
+      Privoxy "templates" are specialized text files utilized by
+      Privoxy for various purposes and can
+      easily be modified using any text editor. All the template pages are
+      installed in a sub-directory appropriately named: templates. Knowing something about HTML syntax will of
+      course be helpful.
+
+      Be forewarned that the default templates are subject to being
+      overwritten during upgrades. You can, however, create completely new
+      templates, place them in another directory and specify the alternate
+      path in the main config. For details, have a
+      look at the templdir option.
+    
+
+    
+      3.30. How can I
+      remove the "Go There Anyway" link from the
+      BLOCKED page?
+
+      There is more than one way to do it (although Perl is not
+      involved).
+
+      Editing the BLOCKED template page (see above) may dissuade some
+      users, but this method is easily circumvented. Where you need this
+      level of control, you might want to build Privoxy from source, and disable various features
+      that are available as compile-time options. You should configure the sources as follows:
+
+      
-          
-          
-          
         
-            Installation
-          
-             
-          
-            Miscellaneous
+          
+            + ./configure  --disable-toggle  --disable-editor  --disable-force
+
           
         
       
+
+      This will create an executable with hard-coded security features so
+      that Privoxy does not allow easy
+      bypassing of blocked sites, or changing the current configuration via
+      any connected user's web browser.
+
+      Finally, all of these features can also be toggled on/off via
+      options in Privoxy's main config
+      file which means you don't have to recompile anything.
     
-  
-
+  
+
+  
+    
 
+    
+      
+        
+
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Installation   Miscellaneous
+  
+
+
diff --git a/doc/webserver/faq/contact.html b/doc/webserver/faq/contact.html
index 5ae45f29..ccb3f427 100644
--- a/doc/webserver/faq/contact.html
+++ b/doc/webserver/faq/contact.html
@@ -1,406 +1,367 @@
-
+
+
 
-  
-    
-    
-      Contacting the developers, Bug Reporting and Feature Requests
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
-        
-          
-          
-          
-        
-      
-            Privoxy Frequently Asked Questions
-          

-            Prev
-          
-          
-            Next
-          
-      
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  span.c2 {font-style: italic}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy Frequently Asked
+        Questions
Prev Next
+    
+  
+
+  
+    6. Contacting the
+    developers, Bug Reporting and Feature Requests
+
+    We value your feedback. In fact, we rely on it to improve Privoxy and its configuration. However, please note
+    the following hints, so we can provide you with the best support:
+
+    
+      6.1.
+      Get Support
+
+      For casual users, our support forum at SourceForge is probably best suited:
+      http://sourceforge.net/tracker/?group_id=11118&atid=211118
+
+      All users are of course welcome to discuss their issues on the
+      users mailing list, where the developers also hang
+      around.
+
+      Please don't sent private support requests to individual Privoxy
+      developers, either use the mailing lists or the support trackers.
+
+      If you have to contact a Privoxy developer directly for other
+      reasons, please send a real mail and do not bother with SourceForge's
+      messaging system. Answers to SourceForge messages are usually bounced
+      by SourceForge's mail server in which case the developer wasted time
+      writing a response you don't get. From your point of view it will look
+      like your message has been completely ignored, so this is frustrating
+      for all parties involved.
+
+      Note that the Privoxy mailing lists are moderated. Posts from
+      unsubscribed addresses have to be accepted manually by a moderator.
+      This may cause a delay of several days and if you use a subject that
+      doesn't clearly mention Privoxy or one of its features, your message
+      may be accidentally discarded as spam.
+
+      If you aren't subscribed, you should therefore spend a few seconds
+      to come up with a proper subject. Additionally you should make it clear
+      that you want to get CC'd. Otherwise some responses will be directed to
+      the mailing list only, and you won't see them.
     
-    
-      
-        6. Contacting the developers, Bug Reporting and
-        Feature Requests
-      
-      
-        We value your feedback. In fact, we rely on it to improve Privoxy and its configuration. However,
-        please note the following hints, so we can provide you with the best
-        support:
-      
-      
-        
-          6.1. Get Support
-        
-        
-          For casual users, our support forum at SourceForge is probably best
-          suited: http://sourceforge.net/tracker/?group_id=11118&atid=211118
-        
-        
-          All users are of course welcome to discuss their issues on the users mailing list, where the developers also
-          hang around.
-        
-        
-          Please don't sent private support requests to individual Privoxy
-          developers, either use the mailing lists or the support trackers.
-        
-        
-          If you have to contact a Privoxy developer directly for other
-          reasons, please send a real mail and do not bother with
-          SourceForge's messaging system. Answers to SourceForge messages are
-          usually bounced by SourceForge's mail server in which case the
-          developer wasted time writing a response you don't get. From your
-          point of view it will look like your message has been completely
-          ignored, so this is frustrating for all parties involved.
-        
-        
-          Note that the Privoxy mailing lists are moderated. Posts from
-          unsubscribed addresses have to be accepted manually by a moderator.
-          This may cause a delay of several days and if you use a subject
-          that doesn't clearly mention Privoxy or one of its features, your
-          message may be accidentally discarded as spam.
-        
-        
-          If you aren't subscribed, you should therefore spend a few seconds
-          to come up with a proper subject. Additionally you should make it
-          clear that you want to get CC'd. Otherwise some responses will be
-          directed to the mailing list only, and you won't see them.
-        
+
+    
+      6.2. Reporting
+      Problems
+
+      "Problems" for our purposes, come in two
+      forms:
+
+      
+        
+          Configuration issues, such as ads that slip through, or sites
+          that don't function properly due to one Privoxy "action" or
+          another being turned "on".
+        
+
+        
+          "Bugs" in the programming code that
+          makes up Privoxy, such as that
+          might cause a crash.
+        
+      
+
+      
+        6.2.1.
+        Reporting Ads or Other Configuration Problems
+
+        Please send feedback on ads that slipped through, innocent images
+        that were blocked, sites that don't work properly, and other
+        configuration related problem of default.action file, to http://sourceforge.net/tracker/?group_id=11118&atid=460288,
+        the Actions File Tracker.
+
+        New, improved default.action files may
+        occasionally be made available based on your feedback. These will be
+        announced on the ijbswa-announce list and available from our the files section of our project page.
       
-      
-        
-          6.2. Reporting Problems
-        
-        
-          "Problems" for our purposes, come in two
-          forms:
-        
+
+      
+        6.2.2.
+        Reporting Bugs
+
+        Please report all bugs through our bug tracker: http://sourceforge.net/tracker/?group_id=11118&atid=111118.
+
+        Before doing so, please make sure that the bug has not already been submitted and observe
+        the additional hints at the top of the submit form. If already submitted, please feel free
+        to add any info to the original report that might help to solve the
+        issue.
+
+        Please try to verify that it is a Privoxy bug, and not a browser or site bug or
+        documented behaviour that just happens to be different than what you
+        expected. If unsure, try toggling
+        off Privoxy, and see if the
+        problem persists.
+
+        If you are using your own custom configuration, please try the
+        stock configs to see if the problem is configuration related. If
+        you're having problems with a feature that is disabled by default,
+        please ask around on the mailing list if others can reproduce the
+        problem.
+
+        If you aren't using the latest Privoxy version, the bug may have
+        been found and fixed in the meantime. We would appreciate if you
+        could take the time to upgrade to the latest version (or even the latest CVS
+        snapshot) and verify that your bug still exists.
+
+        Please be sure to provide the following information:
+
         
           
-            
-              Configuration issues, such as ads that slip through, or sites
-              that don't function properly due to one Privoxy "action" or another being turned "on".
-            
+            The exact Privoxy version you
+            are using (if you got the source from CVS, please also provide
+            the source code revisions as shown in http://config.privoxy.org/show-version).
+          
+
+          
+            The operating system and versions you run Privoxy on, (e.g. Windows XP SP2), if you are using a Unix
+            flavor, sending the output of "uname
+            -a" should do, in case of GNU/Linux, please also name the
+            distribution.
+          
+
+          
+            The name, platform, and version of the browser you were using (e.g. Internet Explorer v5.5 for Mac).
+          
+
+          
+            The URL where the problem occurred, or some way for us to
+            duplicate the problem (e.g. http://somesite.example.com/?somethingelse=123).
+          
+
+          
+            Whether your version of Privoxy is one supplied by the Privoxy developers via SourceForge, or if
+            you got your copy somewhere else.
+          
+
+          
+            Whether you are using Privoxy
+            in tandem with another proxy such as Tor. If so, please temporary disable the
+            other proxy to see if the symptoms change.
           
+
           
-            
-              "Bugs" in the programming code that
-              makes up Privoxy, such as that
-              might cause a crash.
-            
+            Whether you are using a personal firewall product. If so, does
+            Privoxy work without it?
+          
+
+          
+            Any other pertinent information to help identify the problem
+            such as config or log file excerpts (yes, you should have log
+            file entries for each action taken). To get a meaningful logfile,
+            please make sure that the logfile
+            directive is being used and the following debug
+            options are enabled:
+
+            
+            debug     1 # Log the destination for each request Privoxy let through. See also debug 1024.

+
+            debug     2 # show each connection status

+
+            debug     4 # show I/O status

+
+            debug     8 # show header parsing

+
+            debug   128 # debug redirects

+            debug   256 # debug GIF de-animation

+
+            debug   512 # Common Log Format

+
+            debug  1024 # Log the destination for requests Privoxy didn't let through, and the reason why.

+
+            debug  4096 # Startup banner and warnings.

+
+            debug  8192 # Non-fatal errorsIf you
+            are having trouble with a filter, please additionally enable
+
+            
+            debug    64 # debug regular expression filtersIf
+            you are using Privoxy 3.0.17 or later and suspect that it
+            interprets the request or the response incorrectly, please enable
+
+            
+            debug 32768 # log all data read from the networkNote
+            that Privoxy log files may contain sensitive information so
+            please don't submit any logfiles you didn't read first. You can
+            mask sensitive information as long as it's clear that you removed
+            something.
           
         
-        
-          
-            6.2.1. Reporting Ads or Other Configuration
-            Problems
-          
-          
-            Please send feedback on ads that slipped through, innocent images
-            that were blocked, sites that don't work properly, and other
-            configuration related problem of default.action file, to http://sourceforge.net/tracker/?group_id=11118&atid=460288,
-            the Actions File Tracker.
-          
-          
-            New, improved default.action files may
-            occasionally be made available based on your feedback. These will
-            be announced on the ijbswa-announce list and available from our the
-            files section of our project page.
-          
-        
-        
-          
-            6.2.2. Reporting Bugs
-          
-          
-            Please report all bugs through our bug tracker: http://sourceforge.net/tracker/?group_id=11118&atid=111118.
-          
-          
-            Before doing so, please make sure that the bug has not already been
-            submitted and observe the additional hints at the top
-            of the submit form. If already submitted, please feel
-            free to add any info to the original report that might help to
-            solve the issue.
-          
-          
-            Please try to verify that it is a Privoxy bug, and not a browser or site bug
-            or documented behaviour that just happens to be different than
-            what you expected. If unsure, try toggling off Privoxy,
-            and see if the problem persists.
-          
-          
-            If you are using your own custom configuration, please try the
-            stock configs to see if the problem is configuration related. If
-            you're having problems with a feature that is disabled by
-            default, please ask around on the mailing list if others can
-            reproduce the problem.
-          
-          
-            If you aren't using the latest Privoxy version, the bug may have
-            been found and fixed in the meantime. We would appreciate if you
-            could take the time to upgrade to the latest version (or even the latest CVS
-            snapshot) and verify that your bug still exists.
-          
-          
-            Please be sure to provide the following information:
-          
-          
-          
-          
-            
-              
-                The exact Privoxy version
-                you are using (if you got the source from CVS, please also
-                provide the source code revisions as shown in http://config.privoxy.org/show-version).
-              
-            
-            
-              
-                The operating system and versions you run Privoxy on, (e.g. Windows XP SP2), if you are using a Unix
-                flavor, sending the output of "uname
-                -a" should do, in case of GNU/Linux, please also name
-                the distribution.
-              
-            
-            
-              
-                The name, platform, and version of the browser you were using (e.g. Internet Explorer v5.5 for Mac).
-              
-            
-            
-              
-                The URL where the problem occurred, or some way for us to
-                duplicate the problem (e.g. http://somesite.example.com/?somethingelse=123).
-              
-            
-            
-              
-                Whether your version of Privoxy is one supplied by the Privoxy developers via
-                SourceForge, or if you got your copy somewhere else.
-              
-            
-            
-              
-                Whether you are using Privoxy in tandem with another proxy
-                such as Tor. If so, please
-                temporary disable the other proxy to see if the symptoms
-                change.
-              
-            
-            
-              
-                Whether you are using a personal firewall product. If so,
-                does Privoxy work without
-                it?
-              
-            
-            
-              
-                Any other pertinent information to help identify the problem
-                such as config or log file excerpts (yes, you should have log
-                file entries for each action taken). To get a meaningful
-                logfile, please make sure that the logfile
-                directive is being used and the following debug
-                options are enabled:
-              
-              
-                debug     1 # Log the destination for each request Privoxy let through. See also debug 1024.

-
-                 debug     2 # show each connection status

-
-                 debug     4 # show I/O status

-
-                 debug     8 # show header parsing

-
-                 debug   128 # debug redirects

-
-                 debug   256 # debug GIF de-animation

-
-                 debug   512 # Common Log Format

-
-                 debug  1024 # Log the destination for requests Privoxy didn't let through, and the reason why.

-
-                 debug  4096 # Startup banner and warnings.

-
-                 debug  8192 # Non-fatal errors
-              
-              If you are having trouble with a filter, please additionally
-              enable
-              
-                debug    64 # debug regular expression filters
-              
-              If you are using Privoxy 3.0.17 or later and suspect that it
-              interprets the request or the response incorrectly, please
-              enable
-              
-                debug 32768 # log all data read from the network
-              
-              Note that Privoxy log files may contain sensitive information
-              so please don't submit any logfiles you didn't read first. You
-              can mask sensitive information as long as it's clear that you
-              removed something.

-            
-          
-
-          
-            You don't have to tell us your actual name when filing a problem
-            report, but if you don't, please use a nickname so we can
-            differentiate between your messages and the ones entered by other
-            "anonymous" users that may respond to your request if they have
-            the same problem or already found a solution. Note that due to
-            spam the trackers may not always allow to post without being
-            logged into SourceForge. If that's the case, you are still free
-            to create a login that isn't directly linked to your name,
-            though.
-          
-          
-            Please also check the status of your request a few days after
-            submitting it, as we may request additional information. If you
-            use a SF id, you should automatically get a mail when someone
-            responds to your request. Please don't bother to add an email
-            address when using the tracker. If you prefer to communicate
-            through email, just use one of the mailing lists directly.
-          
-          
-            The appendix of the Privoxy User Manual also has
-            helpful information on understanding actions, and action
-            debugging.
-          
-        
-      
-      
-        
-          6.3. Request New Features
-        
-        
-          You are welcome to submit ideas on new features or other proposals
-          for improvement through our feature request tracker at http://sourceforge.net/tracker/?atid=361118&group_id=11118.
-        
-      
-      
-        
-          6.4. Mailing Lists
-        
-        
-          If you prefer to communicate through email, instead of using a web
-          interface, feel free to use one of the mailing lists. To discuss
-          issues that haven't been completely diagnosed yet, please use the
-          Privoxy users list. Technically interested users and people who
-          wish to contribute to the project are always welcome on the
-          developers list. You can find an overview of all Privoxy-related mailing lists, including list
-          archives, at: http://sourceforge.net/mail/?group_id=11118.
-        
+
+        You don't have to tell us your actual name when filing a problem
+        report, but if you don't, please use a nickname so we can
+        differentiate between your messages and the ones entered by other
+        "anonymous" users that may respond to your request if they have the
+        same problem or already found a solution. Note that due to spam the
+        trackers may not always allow to post without being logged into
+        SourceForge. If that's the case, you are still free to create a login
+        that isn't directly linked to your name, though.
+
+        Please also check the status of your request a few days after
+        submitting it, as we may request additional information. If you use a
+        SF id, you should automatically get a mail when someone responds to
+        your request. Please don't bother to add an email address when using
+        the tracker. If you prefer to communicate through email, just use one
+        of the mailing lists directly.
+
+        If you are new to reporting problems, you might be interested in
+        How to Report Bugs Effectively.
+
+        If you are new to reporting problems, you might be interested in
+        How to Report Bugs Effectively.
+
+        The appendix of the Privoxy User Manual also has
+        helpful information on understanding actions, and action
+        debugging.
       
     
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-            Prev
-          
-            Home
-          
-            Next
-          

-            Troubleshooting
-          
-             
-          
-            Privoxy Copyright, License and History
-          
+
+    
+      6.3.
+      Request New Features
+
+      You are welcome to submit ideas on new features or other proposals
+      for improvement through our feature request tracker at http://sourceforge.net/tracker/?atid=361118&group_id=11118.
     
-  
-
 
+    
+      6.4.
+      Mailing Lists
+
+      If you prefer to communicate through email, instead of using a web
+      interface, feel free to use one of the mailing lists. To discuss issues
+      that haven't been completely diagnosed yet, please use the Privoxy
+      users list. Technically interested users and people who wish to
+      contribute to the project are always welcome on the developers list.
+      You can find an overview of all Privoxy-related mailing lists, including list
+      archives, at: http://sourceforge.net/mail/?group_id=11118.
+    
+  
+
+  
+    
+
+    
+      
+        
+
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Troubleshooting   Privoxy Copyright, License
+        and History
+  
+
+
diff --git a/doc/webserver/faq/copyright.html b/doc/webserver/faq/copyright.html
index c0710630..5e0eec56 100644
--- a/doc/webserver/faq/copyright.html
+++ b/doc/webserver/faq/copyright.html
@@ -1,182 +1,165 @@
-
+
+
 
-  
-    
-    
-      Privoxy Copyright, License and History
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
-        
-          
-          
-          
-        
-      
-            Privoxy Frequently Asked Questions
-          

-            Prev
-          
-          
-             
-          
-      
-    
-    
-      
-        7. Privoxy Copyright, License and History
-      
-      
-        Copyright © 2001-2011 by Privoxy Developers <ijbswa-developers@lists.sourceforge.net>
-      
-      
-        Some source code is based on code Copyright © 1997 by Anonymous
-        Coders and Junkbusters, Inc. and licensed under the GNU General Public License.
-      
-      
-        Portions of this document are "borrowed"
-        from the original Junkbuster (tm)
-        FAQ, and modified as appropriate for Privoxy.
-      
-      
-        
-          7.1. License
-        
-        
-          Privoxy is free software; you can
-          redistribute it and/or modify it under the terms of the GNU General Public License, version 2, as published
-          by the Free Software Foundation.
-        
-        
-          This program is distributed in the hope that it will be useful, but
-          WITHOUT ANY WARRANTY; without even the implied warranty of
-          MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
-          License for details.
-        
-        
-          You should have received a copy of the GNU
-          GPL along with this program; if not, write to the
-        
-        
-           Free Software

-            Foundation, Inc. 51 Franklin
-          Street, Fifth Floor

-            Boston, MA 02110-1301

-            USA 
-        
-      
-      
-        
-          7.2. History
-        
-        
-          A long time ago, there was the Internet Junkbuster, by Anonymous Coders
-          and Junkbusters
-          Corporation. This saved many users a lot of pain in the early
-          days of web advertising and user tracking.
-        
-        
-          But the web, its protocols and standards, and with it, the
-          techniques for forcing ads on users, give up autonomy over their
-          browsing, and for tracking them, keeps evolving. Unfortunately, the
-          Internet Junkbuster did not.
-          Version 2.0.2, published in 1998, was (and is) the last official release available from Junkbusters
-          Corporation. Fortunately, it had been released under the GNU GPL, which allowed further development by others.
-        
-        
-          So Stefan Waldherr started maintaining an improved version of the
-          software, to which eventually a number of people contributed
-          patches. It could already replace banners with a transparent image,
-          and had a first version of pop-up killing, but it was still very
-          closely based on the original, with all its limitations, such as
-          the lack of HTTP/1.1 support, flexible per-site configuration, or
-          content modification. The last release from this effort was version
-          2.0.2-10, published in 2000.
-        
-        
-          Then, some developers picked up the thread, and started turning the
-          software inside out, upside down, and then reassembled it, adding
-          many new features along the way.
-        
-        
-          The result of this is Privoxy,
-          whose first stable version, 3.0, was released August, 2002.
-        
-      
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  a.c2 {font-style: italic}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy Frequently Asked
+        Questions
Prev  
+    
+  
+
+  
+    7. Privoxy
+    Copyright, License and History
+
+    Copyright © 2001-2011 by Privoxy Developers <ijbswa-developers@lists.sourceforge.net>
+
+    Some source code is based on code Copyright © 1997 by Anonymous
+    Coders and Junkbusters, Inc. and licensed under the GNU General Public License.
+
+    Portions of this document are "borrowed"
+    from the original Junkbuster (tm) FAQ,
+    and modified as appropriate for Privoxy.
+
+    
+      7.1. License
+
+      Privoxy is free software; you can
+      redistribute it and/or modify it under the terms of the GNU General Public License, version 2, as published by
+      the Free Software Foundation.
+
+      This program is distributed in the hope that it will be useful, but
+      WITHOUT ANY WARRANTY; without even the implied warranty of
+      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for details.
+
+      You should have received a copy of the GNU
+      GPL along with this program; if not, write to the
+
+       Free Software

+       Foundation, Inc. 51 Franklin
+      Street, Fifth Floor

+       Boston, MA 02110-1301

+       USA 
     
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-            Prev
-          
-            Home
-          
-             
-          

-            Contacting the developers, Bug Reporting and Feature Requests
-          
-             
-          
-             
-          
+
+    
+      7.2. History
+
+      A long time ago, there was the Internet Junkbuster, by Anonymous Coders and
+      Junkbusters
+      Corporation. This saved many users a lot of pain in the early days
+      of web advertising and user tracking.
+
+      But the web, its protocols and standards, and with it, the
+      techniques for forcing ads on users, give up autonomy over their
+      browsing, and for tracking them, keeps evolving. Unfortunately, the
+      Internet Junkbuster did not. Version
+      2.0.2, published in 1998, was (and is) the last official release available from Junkbusters Corporation. Fortunately, it had been
+      released under the GNU GPL, which allowed further development by others.
+
+      So Stefan Waldherr started maintaining an improved version of the
+      software, to which eventually a number of people contributed patches.
+      It could already replace banners with a transparent image, and had a
+      first version of pop-up killing, but it was still very closely based on
+      the original, with all its limitations, such as the lack of HTTP/1.1
+      support, flexible per-site configuration, or content modification. The
+      last release from this effort was version 2.0.2-10, published in
+      2000.
+
+      Then, some developers picked up the thread, and started turning the
+      software inside out, upside down, and then reassembled it, adding many
+      new features along the way.
+
+      The result of this is Privoxy,
+      whose first stable version, 3.0, was released August, 2002.
     
-  
-
+  
 
+  
+    
+
+    
+      
+        
+
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home  
Contacting the developers,
+        Bug Reporting and Feature Requests    
+  
+
+
diff --git a/doc/webserver/faq/general.html b/doc/webserver/faq/general.html
index 24a54427..3fb3b53a 100644
--- a/doc/webserver/faq/general.html
+++ b/doc/webserver/faq/general.html
@@ -1,685 +1,614 @@
-
+
+
 
-  
-    
-    
-      General Information
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
-        
-          
-          
-          
-        
-      
-            Privoxy Frequently Asked Questions
-          

-            Prev
-          
-          
-            Next
-          
-      
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  span.c2 {font-style: italic}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy Frequently Asked
+        Questions
Prev Next
+    
+  
+
+  
+    1. General
+    Information
+
+    
+      1.1. Who should give
+      Privoxy a try?
+
+      Anyone who is interested in security, privacy, or in finer-grained
+      control over their web and Internet experience.
     
-    
-      
-        1. General Information
-      
-      
-        
-          1.1. Who should give Privoxy a try?
-        
-        
-          Anyone who is interested in security, privacy, or in finer-grained
-          control over their web and Internet experience.
-        
-      
-      
-        
-          1.2. Is Privoxy the best choice for me?
-        
-        
-          Privoxy is certainly a good
-          choice, especially for those who want more control and security.
-          Those with the willingness to read the documentation and the
-          ability to fine-tune their installation will benefit the most.
-        
-        
-          One of Privoxy's strengths is that
-          it is highly configurable giving you the ability to completely
-          personalize your installation. Being familiar with, or at least
-          having an interest in learning about HTTP and
-          other networking protocols, HTML, and "Regular Expressions" will be
-          a big plus and will help you get the most out of Privoxy. A new installation just includes a
-          very basic configuration. The user should take this as a starting
-          point only, and enhance it as he or she sees fit. In fact, the user
-          is encouraged, and expected to, fine-tune the configuration.
-        
-        
-          Much of Privoxy's configuration
-          can be done with a Web
-          browser. But there are areas where configuration is done using
-          a text editor to edit configuration files. Also note that
-          the web-based action editor doesn't use authentication and should
-          only be enabled in environments where all clients with access to
-          Privoxy listening port can be
-          trusted.
-        
-      
-      
-        
-          1.3. What is a "proxy"? How does Privoxy work?
-        
-        
-          A web proxy is a service, based on a software such as
-          Privoxy, that clients (i.e.
-          browsers) can use instead of connecting to web servers directly.
-          The clients then ask the proxy to request objects (web pages,
-          images, movies etc) on their behalf and to forward the data to the
-          clients. It is a "go-between". For
-          details, see Wikipedia's proxy definition.
-        
-        
-          There are many reasons to use web proxies, such as security
-          (firewalling), efficiency (caching) and others, and there are any
-          number of proxies to accommodate those needs.
-        
-        
-          Privoxy is a proxy that is
-          primarily focused on privacy enhancement, ad and junk elimination
-          and freeing the user from restrictions placed on his activities.
-          Sitting between your browser(s) and the Internet, it is in a
-          perfect position to filter outbound personal information that your
-          browser is leaking, as well as inbound junk. It uses a variety of
-          techniques to do this, all of which are under your complete control
-          via the various configuration files and options. Being a proxy also
-          makes it easier to share configurations among multiple browsers
-          and/or users.
-        
-      
-      
-        
-          1.4. Does Privoxy do anything more than ad
-          blocking?
-        
-        
-          Yes, ad blocking is but one possible use. There are many, many ways
-          Privoxy can be used to sanitize
-          and customize web browsing.
-        
-      
-      
-        
-          1.5. What is this new version of "Junkbuster"?
-        
-        
-          A long time ago, there was the Internet Junkbuster, by Anonymous Coders
-          and Junkbusters
-          Corporation. This saved many users a lot of pain in the early
-          days of web advertising and user tracking.
-        
-        
-          But the web, its protocols and standards, and with it, the
-          techniques for forcing ads on users, give up autonomy over their
-          browsing, and for tracking them, keeps evolving. Unfortunately, the
-          Internet Junkbuster did not.
-          Version 2.0.2, published in 1998, was (and is) the last official release available from Junkbusters
-          Corporation. Fortunately, it had been released under the GNU GPL, which allowed further development by others.
-        
-        
-          So Stefan Waldherr started maintaining an improved version of the
-          software, to which eventually a number of people contributed
-          patches. It could already replace banners with a transparent image,
-          and had a first version of pop-up killing, but it was still very
-          closely based on the original, with all its limitations, such as
-          the lack of HTTP/1.1 support, flexible per-site configuration, or
-          content modification. The last release from this effort was version
-          2.0.2-10, published in 2000.
-        
-        
-          Then, some developers picked up the thread, and started turning the
-          software inside out, upside down, and then reassembled it, adding
-          many new features along the way.
-        
-        
-          The result of this is Privoxy,
-          whose first stable version, 3.0, was released August, 2002.
-        
-      
-      
-        
-          1.6. Why "Privoxy"? Why
-          change the name from Junkbuster at all?
-        
-        
-          Though outdated, Junkbusters Corporation continues to offer their
-          original version of the Internet
-          Junkbuster, so publishing our Junkbuster-derived software under the same
-          name led to confusion.
-        
-        
-          There are also potential legal complications from our use of the
-          Junkbuster name, which is a
-          registered trademark of Junkbusters Corporation. There are, however, no
-          objections from Junkbusters Corporation to the Privoxy project itself, and they, in fact,
-          still share our ideals and goals.
-        
-        
-          The developers also believed that there are so many improvements
-          over the original code, that it was time to make a clean break from
-          the past and make a name in their own right.
-        
-        
-          Privoxy is the "Privacy
-          Enhancing Proxy". Also, its content modification
-          and junk suppression gives you, the user, more control, more freedom,
-          and allows you to browse your personal and "private edition" of the web.
-        
+
+    
+      1.2. Is Privoxy
+      the best choice for me?
+
+      Privoxy is certainly a good choice,
+      especially for those who want more control and security. Those with the
+      willingness to read the documentation and the ability to fine-tune
+      their installation will benefit the most.
+
+      One of Privoxy's strengths is that
+      it is highly configurable giving you the ability to completely
+      personalize your installation. Being familiar with, or at least having
+      an interest in learning about HTTP and other
+      networking protocols, HTML, and "Regular Expressions" will be a
+      big plus and will help you get the most out of Privoxy. A new installation just includes a very
+      basic configuration. The user should take this as a starting point
+      only, and enhance it as he or she sees fit. In fact, the user is
+      encouraged, and expected to, fine-tune the configuration.
+
+      Much of Privoxy's configuration can
+      be done with a Web browser. But there are areas where configuration
+      is done using a text editor to edit configuration files. Also note
+      that the web-based action editor doesn't use authentication and should
+      only be enabled in environments where all clients with access to
+      Privoxy listening port can be
+      trusted.
+    
+
+    
+      1.3. What is a
+      "proxy"? How does Privoxy work?
+
+      A web proxy is a service, based on a software such as
+      Privoxy, that clients (i.e. browsers)
+      can use instead of connecting to web servers directly. The clients then
+      ask the proxy to request objects (web pages, images, movies etc) on
+      their behalf and to forward the data to the clients. It is a
+      "go-between". For details, see Wikipedia's
+      proxy definition.
+
+      There are many reasons to use web proxies, such as security
+      (firewalling), efficiency (caching) and others, and there are any
+      number of proxies to accommodate those needs.
+
+      Privoxy is a proxy that is
+      primarily focused on privacy enhancement, ad and junk elimination and
+      freeing the user from restrictions placed on his activities. Sitting
+      between your browser(s) and the Internet, it is in a perfect position
+      to filter outbound personal information that your browser is leaking,
+      as well as inbound junk. It uses a variety of techniques to do this,
+      all of which are under your complete control via the various
+      configuration files and options. Being a proxy also makes it easier to
+      share configurations among multiple browsers and/or users.
+    
+
+    
+      1.4. Does
+      Privoxy do anything more than ad blocking?
+
+      Yes, ad blocking is but one possible use. There are many, many ways
+      Privoxy can be used to sanitize and
+      customize web browsing.
+    
+
+    
+      1.5. What is this new
+      version of "Junkbuster"?
+
+      A long time ago, there was the Internet Junkbuster, by Anonymous Coders and
+      Junkbusters
+      Corporation. This saved many users a lot of pain in the early days
+      of web advertising and user tracking.
+
+      But the web, its protocols and standards, and with it, the
+      techniques for forcing ads on users, give up autonomy over their
+      browsing, and for tracking them, keeps evolving. Unfortunately, the
+      Internet Junkbuster did not. Version
+      2.0.2, published in 1998, was (and is) the last official release available from Junkbusters Corporation. Fortunately, it had been
+      released under the GNU GPL, which allowed further development by others.
+
+      So Stefan Waldherr started maintaining an improved version of the
+      software, to which eventually a number of people contributed patches.
+      It could already replace banners with a transparent image, and had a
+      first version of pop-up killing, but it was still very closely based on
+      the original, with all its limitations, such as the lack of HTTP/1.1
+      support, flexible per-site configuration, or content modification. The
+      last release from this effort was version 2.0.2-10, published in
+      2000.
+
+      Then, some developers picked up the thread, and started turning the
+      software inside out, upside down, and then reassembled it, adding many
+      new features along the way.
+
+      The result of this is Privoxy,
+      whose first stable version, 3.0, was released August, 2002.
+    
+
+    
+      1.6. Why "Privoxy"? Why change the name from Junkbuster at
+      all?
+
+      Though outdated, Junkbusters Corporation continues to offer their original
+      version of the Internet Junkbuster, so
+      publishing our Junkbuster-derived
+      software under the same name led to confusion.
+
+      There are also potential legal complications from our use of the
+      Junkbuster name, which is a registered
+      trademark of Junkbusters Corporation. There are, however, no objections
+      from Junkbusters Corporation to the Privoxy project itself, and they, in fact, still
+      share our ideals and goals.
+
+      The developers also believed that there are so many improvements
+      over the original code, that it was time to make a clean break from the
+      past and make a name in their own right.
+
+      Privoxy is the "Privacy Enhancing
+      Proxy". Also, its content modification and junk
+      suppression gives you, the
+      user, more control, more freedom, and allows you to browse your
+      personal and "private edition" of the web.
+    
+
+    
+      1.7. How does Privoxy
+      differ from the old Junkbuster?
+
+      Privoxy picks up where Junkbuster left off. The new Privoxy still blocks ads and banners, still
+      manages cookies, and still helps protect your privacy. But, most of
+      these features have been enhanced, and many new ones have been added,
+      all in the same vein.
+
+      Privoxy's new features include:
+
+      
+        
+          Supports "Connection: keep-alive". Outgoing connections can be
+          kept alive independently from the client.
+        
+
+        
+          Supports IPv6, provided the operating system does so too, and
+          the configure script detects it.
+        
+
+        
+          Supports tagging which allows to change the behaviour based on
+          client and server headers.
+        
+
+        
+          Can be run as an "intercepting" proxy, which obviates the need
+          to configure browsers individually.
+        
+
+        
+          Sophisticated actions and filters for manipulating both server
+          and client headers.
+        
+
+        
+          Can be chained with other proxies.
+        
+
+        
+          Integrated browser-based configuration and control utility at
+          http://config.privoxy.org/ (shortcut: http://p.p/). Browser-based tracing
+          of rule and filter effects. Remote toggling.
+        
+
+        
+          Web page filtering (text replacements, removes banners based on
+          size, invisible "web-bugs" and HTML
+          annoyances, etc.)
+        
+
+        
+          Modularized configuration that allows for standard settings and
+          user settings to reside in separate files, so that installing
+          updated actions files won't overwrite individual user settings.
+        
+
+        
+          Support for Perl Compatible Regular Expressions in the
+          configuration files, and a more sophisticated and flexible
+          configuration syntax.
+        
+
+        
+          GIF de-animation.
+        
+
+        
+          Bypass many click-tracking scripts (avoids script
+          redirection).
+        
+
+        
+          User-customizable HTML templates for most proxy-generated pages
+          (e.g. "blocked" page).
+        
+
+        
+          Auto-detection and re-reading of config file changes.
+        
+
+        
+          Most features are controllable on a per-site or per-location
+          basis.
+        
+
+        
+          Many smaller new features added, limitations and bugs
+          removed.
+        
+      
+    
+
+    
+      1.8. How does
+      Privoxy know what is an ad, and what is not?
+
+      Privoxy's approach to blocking ads
+      is twofold:
+
+      First, there are certain patterns in the locations (URLs) of banner images. This
+      applies to both the path (you wouldn't guess how many web sites serve
+      their banners from a directory called "banners"!) and the host (blocking the big banner
+      hosting services like doublecklick.net already helps a lot).
+      Privoxy takes advantage of this fact
+      by using URL patterns to sort out and block the requests for things
+      that sound like they would be ads or banners.
+
+      Second, banners tend to come in certain sizes. But you can't tell the size of an
+      image by its URL without downloading it, and if you do, it's too late
+      to save bandwidth. Therefore, Privoxy
+      also inspects the HTML sources of web pages while they are loaded, and
+      replaces references to images with standard banner sizes by dummy
+      references, so that your browser doesn't request them anymore in the
+      first place.
+
+      Both of this involves a certain amount of guesswork and is, of
+      course, freely and readily configurable.
+    
+
+    
+      1.9. Can Privoxy make
+      mistakes? This does not sound very scientific.
+
+      Actually, it's a black art ;-) And yes, it is always possible to
+      have a broad rule accidentally block or change something by mistake.
+      You will almost surely run into such situations at some point. It is
+      tricky writing rules to cover every conceivable possibility, and not
+      occasionally get false positives.
+
+      But this should not be a big concern since the Privoxy configuration is very flexible, and
+      includes tools to help identify these types of situations so they can
+      be addressed as needed, allowing you to customize your installation.
+      (See the Troubleshooting section
+      below.)
+    
+
+    
+      1.10. Will I have to
+      configure Privoxy before I can use it?
+
+      That depends on your expectations. The default installation should
+      give you a good starting point, and block most ads and unwanted content, but many
+      of the more advanced features are off by default, and require you to
+      activate them.
+
+      You do have to set up your browser to use Privoxy (see the Installation section below).
+
+      And you will certainly run into situations where there are false
+      positives, or ads not being blocked that you may not want to see. In
+      these cases, you would certainly benefit by customizing Privoxy's configuration to more closely match your
+      individual situation. And we encourage you to do this. This is where
+      the real power of Privoxy lies!
+    
+
+    
+      1.11. Can Privoxy run as a
+      server on a network?
+
+      Yes, Privoxy runs as a server
+      already, and can easily be configured to "serve" more than one client. See How can I set up Privoxy to act as a
+      proxy for my LAN below.
+    
+
+    
+      1.12. My browser
+      does the same things as Privoxy. Why should I use Privoxy at
+      all?
+
+      Modern browsers do indeed have some of the same functionality as
+      Privoxy. Maybe this is adequate for
+      you. But Privoxy is very versatile and
+      powerful, and can probably do a number of things your browser just
+      can't.
+
+      In addition, a proxy is good choice if you use multiple browsers, or
+      have a LAN with multiple computers since Privoxy can run as a server application. This way
+      all the configuration is in one place, and you don't have to maintain a
+      similar configuration for possibly many browsers or users.
+
+      Note, however, that it's recommended to leverage both your browser's
+      and Privoxy's privacy enhancing
+      features at the same time. While your browser probably lacks some
+      features Privoxy offers, it should
+      also be able to do some things more reliable, for example restricting
+      and suppressing JavaScript.
+    
+
+    
+      1.13. Why should I
+      trust Privoxy?
+
+      The most important reason is because you have access to everything, and you can control
+      everything. You can check every line of every configuration file
+      yourself. You can check every last bit of source code should you
+      desire. And even if you can't read code, there should be some comfort
+      in knowing that other people can, and do read it. You can build the
+      software from scratch, if you want, so that you know the executable is
+      clean, and that it is yours.
+      In fact, we encourage this level of scrutiny. It is one reason we use
+      Privoxy ourselves.
+    
+
+    
+      1.14. Is there is a
+      license or fee? What about a warranty? Registration?
+
+      Privoxy is free software and
+      licensed under the GNU General Public License (GPL) version 2. It is free to
+      use, copy, modify or distribute as you wish under the terms of this
+      license. Please see the Copyright section
+      for more information on the license and copyright. Or the LICENSE file that should be included.
+
+      There is no warranty of
+      any kind, expressed, implied or otherwise. That is something that would
+      cost real money ;-) There is no registration either.
+    
+
+    
+      1.15. Can Privoxy
+      remove spyware? Adware? Viruses?
+
+      No, at least not reliably enough to trust it. Privoxy is not designed to be a malware removal
+      tool and the default configuration doesn't even try to filter out any
+      malware.
+
+      Privoxy could help prevent contact
+      from (known) sites that use such tactics with appropriate configuration
+      rules, and thus could conceivably prevent contamination from such
+      sites. However, keeping such a configuration up to date would require a
+      lot of time and effort that would be better spend on keeping your
+      software itself up to date so it doesn't have known
+      vulnerabilities.
+    
+
+    
+      1.16. Can I use
+      Privoxy with other ad-blocking software?
+
+      Privoxy should work fine with other
+      proxies and other software in general.
+
+      But it is probably not necessary to use Privoxy in conjunction with other ad-blocking
+      products, and this could conceivably cause undesirable results. It
+      might be better to choose one software or the other and work a little
+      to tweak its configuration to your liking.
+
+      Note that this is an advice specific to ad blocking.
+    
+
+    
+      1.17. I would like to help you, what can I
+      do?
+
+      
+        1.17.1.
+        Would you like to participate?
+
+        Well, we always need
+        help. There is something for everybody who wants to help us. We
+        welcome new developers, packagers, testers, documentation writers or
+        really anyone with a desire to help in any way. You DO NOT need to be a "programmer". There are many other tasks available. In
+        fact, the programmers often can't spend as much time programming
+        because of some of the other, more mundane things that need to be
+        done, like checking the Tracker feedback sections or responding to
+        user questions on the mailing lists.
+
+        So first thing, subscribe to the Privoxy Users or the Privoxy Developers mailing list, join the
+        discussion, help out other users, provide general feedback or report
+        problems you noticed.
+
+        If you intend to help out with the trackers, you also might want
+        to get an account on SourceForge.net so we don't confuse you
+        with the other name-less users.
+
+        We also have a Developer's Manual. While it is partly out of date, it's
+        still worth reading.
+
+        Our TODO list may be of interest to you as well. Please
+        let us know if you want to work on one of the items listed.
       
-      
-        
-          1.7. How does Privoxy differ from the old
-          Junkbuster?
-        
-        
-          Privoxy picks up where Junkbuster left off. The new Privoxy still blocks ads and banners,
-          still manages cookies, and still helps protect your privacy.
-          But, most of these features have been enhanced, and many new ones
-          have been added, all in the same vein.
-        
-        
-          Privoxy's new features include:
-        
-        
-        
+
+      
+        1.17.2. Would you like
+        to donate?
+
+        Privoxy is developed by unpaid
+        volunteers and thus our current running costs are pretty low.
+        Nevertheless, we have plans that will cost money in the future. They
+        include, but aren't limited to spending money on:
+
         
           
-            
-              Supports "Connection: keep-alive". Outgoing connections can be
-              kept alive independently from the client.
-            
-          
-          
-            
-              Supports IPv6, provided the operating system does so too, and
-              the configure script detects it.
-            
-          
-          
-            
-              Supports tagging which allows to change the behaviour based on
-              client and server headers.
-            
-          
-          
-            
-              Can be run as an "intercepting" proxy, which obviates the need
-              to configure browsers individually.
-            
-          
-          
-            
-              Sophisticated actions and filters for manipulating both server
-              and client headers.
-            
-          
-          
-            
-              Can be chained with other proxies.
-            
-          
-          
-            
-              Integrated browser-based configuration and control utility at
-              http://config.privoxy.org/ (shortcut: http://p.p/). Browser-based
-              tracing of rule and filter effects. Remote toggling.
-            
-          
-          
-            
-              Web page filtering (text replacements, removes banners based on
-              size, invisible "web-bugs" and HTML
-              annoyances, etc.)
-            
-          
-          
-            
-              Modularized configuration that allows for standard settings and
-              user settings to reside in separate files, so that installing
-              updated actions files won't overwrite individual user settings.
-            
-          
-          
-            
-              Support for Perl Compatible Regular Expressions in the
-              configuration files, and a more sophisticated and flexible
-              configuration syntax.
-            
-          
-          
-            
-              GIF de-animation.
-            
-          
-          
-            
-              Bypass many click-tracking scripts (avoids script redirection).
-            
-          
-          
-            
-              User-customizable HTML templates for most proxy-generated pages
-              (e.g. "blocked" page).
-            
-          
-          
-            
-              Auto-detection and re-reading of config file changes.
-            
+            Hardware to help make sure Privoxy keeps running on platforms the
+            developers currently can't test on and can be ported to
+            others.
           
+
           
-            
-              Most features are controllable on a per-site or per-location
-              basis.
-            
+            Technical books to educate our developers about said platforms
+            or to improve their knowledge in general.
           
+
           
-            
-              Many smaller new features added, limitations and bugs removed.
-            
+            More reliable hosting,
           
         
+
+        We would like to get this money through donations made by our
+        users.
+
+        Privoxy has therefore become an
+        associated project of Software
+        in the Public Interest (SPI), which allows us to receive
+        donations. In the United States they are tax-deductible, in a few
+        other western countries they might be tax-deductible in the
+        future.
+
+        If you read this section before you may notice that paying for the
+        project domain privoxy.org is no longer on the list. It has been
+        transferred to SPI is sponsored by Mythic Beasts Ltd.
+
+        If you enjoy our software and feel like helping out with a
+        donation, please have a look at SPI's donation
+        page to see what the options are. If you have any questions
+        regarding donations please mail to either the public user mailing
+        list or, if it's a private matter, to Fabian Keil (Privoxy's
+        SPI liason) directly.
       
-      
-        
-          1.8. How does Privoxy know what is an ad, and
-          what is not?
-        
-        
-          Privoxy's approach to blocking ads
-          is twofold:
-        
-        
-          First, there are certain patterns in the locations (URLs) of banner images. This
-          applies to both the path (you wouldn't guess how many web sites
-          serve their banners from a directory called "banners"!) and the host (blocking the big banner
-          hosting services like doublecklick.net already helps a lot). Privoxy takes advantage of this fact by
-          using URL patterns to sort out and block the requests
-          for things that sound like they would be ads or banners.
-        
-        
-          Second, banners tend to come in certain sizes. But you can't tell the size of
-          an image by its URL without downloading it, and if you do, it's too
-          late to save bandwidth. Therefore, Privoxy also inspects the HTML sources of web
-          pages while they are loaded, and replaces references to images with
-          standard banner sizes by dummy references, so that your browser
-          doesn't request them anymore in the first place.
-        
-        
-          Both of this involves a certain amount of guesswork and is, of
-          course, freely and readily configurable.
-        
-      
-      
-        
-          1.9. Can Privoxy make mistakes? This does not
-          sound very scientific.
-        
-        
-          Actually, it's a black art ;-) And yes, it is always possible to
-          have a broad rule accidentally block or change something by
-          mistake. You will almost surely run into such situations at some
-          point. It is tricky writing rules to cover every conceivable
-          possibility, and not occasionally get false positives.
-        
-        
-          But this should not be a big concern since the Privoxy configuration is very flexible, and
-          includes tools to help identify these types of situations so they
-          can be addressed as needed, allowing you to customize your
-          installation. (See the
-          Troubleshooting section below.)
-        
-      
-      
-        
-          1.10. Will I have to configure Privoxy before I
-          can use it?
-        
-        
-          That depends on your expectations. The default installation should
-          give you a good starting point, and block most ads and unwanted content, but many
-          of the more advanced features are off by default, and require you
-          to activate them.
-        
-        
-          You do have to set up your browser to use Privoxy (see the Installation section below).
-        
-        
-          And you will certainly run into situations where there are false
-          positives, or ads not being blocked that you may not want to see.
-          In these cases, you would certainly benefit by customizing Privoxy's configuration to more closely
-          match your individual situation. And we encourage you to do this.
-          This is where the real power of Privoxy lies!
-        
-      
-      
-        
-          1.11. Can Privoxy run as a server on a network?
-        
-        
-          Yes, Privoxy runs as a server
-          already, and can easily be configured to "serve" more than one client. See How can I set up Privoxy to act as a
-          proxy for my LAN below.
-        
-      
-      
-        
-          1.12. My browser does the same things as
-          Privoxy. Why should I use Privoxy at all?
-        
-        
-          Modern browsers do indeed have some of the same functionality as Privoxy. Maybe this is adequate for you.
-          But Privoxy is very versatile and
-          powerful, and can probably do a number of things your browser just
-          can't.
-        
-        
-          In addition, a proxy is good choice if you use multiple browsers,
-          or have a LAN with multiple computers since Privoxy can run as a server application. This
-          way all the configuration is in one place, and you don't have to
-          maintain a similar configuration for possibly many browsers or
-          users.
-        
-        
-          Note, however, that it's recommended to leverage both your
-          browser's and Privoxy's privacy
-          enhancing features at the same time. While your browser probably
-          lacks some features Privoxy
-          offers, it should also be able to do some things more reliable, for
-          example restricting and suppressing JavaScript.
-        
-      
-      
-        
-          1.13. Why should I trust Privoxy?
-        
-        
-          The most important reason is because you have access to everything, and you
-          can control everything. You can check every line of every
-          configuration file yourself. You can check every last bit of source
-          code should you desire. And even if you can't read code, there
-          should be some comfort in knowing that other people can, and do
-          read it. You can build the software from scratch, if you want, so
-          that you know the executable is clean, and that it is yours. In fact, we
-          encourage this level of scrutiny. It is one reason we use Privoxy ourselves.
-        
-      
-      
-        
-          1.14. Is there is a license or fee? What about a
-          warranty? Registration?
-        
-        
-          Privoxy is free software and
-          licensed under the GNU General Public License (GPL) version 2. It is free
-          to use, copy, modify or distribute as you wish under the terms of
-          this license. Please see the Copyright
-          section for more information on the license and copyright. Or the
-          LICENSE file that should be included.
-        
-        
-          There is no
-          warranty of any kind, expressed, implied or otherwise.
-          That is something that would cost real money ;-) There is no
-          registration either.
-        
-      
-      
-        
-          1.15. Can Privoxy remove spyware? Adware?
-          Viruses?
-        
-        
-          No, at least not reliably enough to trust it. Privoxy is not designed to be a malware
-          removal tool and the default configuration doesn't even try to
-          filter out any malware.
-        
-        
-          Privoxy could help prevent contact
-          from (known) sites that use such tactics with appropriate
-          configuration rules, and thus could conceivably prevent
-          contamination from such sites. However, keeping such a
-          configuration up to date would require a lot of time and effort
-          that would be better spend on keeping your software itself up to
-          date so it doesn't have known vulnerabilities.
-        
-      
-      
-        
-          1.16. Can I use Privoxy with other ad-blocking
-          software?
-        
-        
-          Privoxy should work fine with
-          other proxies and other software in general.
-        
-        
-          But it is probably not necessary to use Privoxy in conjunction with other ad-blocking
-          products, and this could conceivably cause undesirable results. It
-          might be better to choose one software or the other and work a
-          little to tweak its configuration to your liking.
-        
-        
-          Note that this is an advice specific to ad blocking.
-        
-      
-      
-        
-          1.17. I would like to help you, what
-          can I do?
-        
-        
-          
-            1.17.1. Would you like to participate?
-          
-          
-            Well, we always need help. There is something for
-            everybody who wants to help us. We welcome new developers,
-            packagers, testers, documentation writers or really anyone with a
-            desire to help in any way. You DO NOT need to be a "programmer". There are many other tasks
-            available. In fact, the programmers often can't spend as much
-            time programming because of some of the other, more mundane
-            things that need to be done, like checking the Tracker feedback
-            sections or responding to user questions on the mailing lists.
-          
-          
-            So first thing, subscribe to the Privoxy Users or the Privoxy Developers mailing list, join the
-            discussion, help out other users, provide general feedback or
-            report problems you noticed.
-          
-          
-            If you intend to help out with the trackers, you also might want
-            to get an account on SourceForge.net so we don't confuse
-            you with the other name-less users.
-          
-          
-            We also have a Developer's Manual. While it is partly out of date,
-            it's still worth reading.
-          
-          
-            Our TODO list may be of interest to you as well.
-            Please let us know if you want to work on one of the items
-            listed.
-          
-        
-        
-          
-            1.17.2. Would you like to donate?
-          
-          
-            Privoxy is developed by unpaid
-            volunteers and thus our current running costs are pretty low.
-            Nevertheless, we have plans that will cost money in the future.
-            We would like to get this money through donations made by our
-            users.
-          
-          
-            Privoxy has therefore become an
-            associated project of Software in the Public Interest (SPI), which allows us
-            to receive tax-deductible donations in most western countries.
-          
-          
-            We intend to use the donations to pay for our domain after
-            transferring it to SPI. Our goal is to make sure there's no
-            single point of failure and the bill gets paid and the site keeps
-            running even if a some of the currently active developers were to
-            suddenly disappear for a while.
-          
-          
-            We would also like to spend some money on more reliable hosting,
-            on hardware to help make sure Privoxy keeps running on platforms the
-            developers currently can't test on, and on technical books to
-            educate our developers about said platforms or to improve their
-            knowledge in general.
-          
-          
-            If you enjoy our software and feel like helping out with a
-            donation, please have a look at SPI's donation
-            page to see what the options are.
-          
-        
-      
-    
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-            Prev
-          
-            Home
-          
-            Next
-          

-            Privoxy Frequently Asked Questions
-          
-             
-          
-            Installation
-          
     
-  
-
+  
+
+  
+    
+
+    
+      
+        
 
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Privoxy Frequently Asked
+        Questions   Installation
+  
+
+
diff --git a/doc/webserver/faq/index.html b/doc/webserver/faq/index.html
index d73498c9..4ba7e892 100644
--- a/doc/webserver/faq/index.html
+++ b/doc/webserver/faq/index.html
@@ -1,686 +1,558 @@
-
+
+
 
-  
-    
-    
-      Privoxy Frequently Asked Questions
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          Privoxy Frequently Asked Questions
-        
-        
-          _{Copyright © 2001-2011 by Privoxy
-          Developers}

-        
-        
-          $Id: index.html,v 1.67 2011/08/26 16:14:03 fabiankeil Exp $

-        
-        
-          
-          
-            This FAQ gives quick answers to frequently asked questions about
-            Privoxy. It
-            is not a substitute for the Privoxy User Manual.
-          
-          
-            What is Privoxy?
-          
-          
-            Privoxy is a non-caching web proxy with advanced filtering
-            capabilities for enhancing privacy, modifying web page data and
-            HTTP headers, controlling access, and removing ads and other
-            obnoxious Internet junk. Privoxy has a flexible configuration and
-            can be customized to suit individual needs and tastes. It has
-            application for both stand-alone systems and multi-user networks.
-          
-          
-            Privoxy is Free Software and licensed under the GNU GPLv2.
-          
-          
-            Privoxy is an associated project of Software in the Public
-            Interest (SPI).
-          
-          
-            Helping hands and donations are welcome:
-          
-          
-            
-              
-                http://www.privoxy.org/faq/general.html#PARTICIPATE
-              
-            
-            
-              
-                http://www.privoxy.org/faq/general.html#DONATE
-              
-            
-          
-
-          
-            Please note that this document is a work in progress. This copy
-            represents the state at the release of version 3.0.18. You can
-            find the latest version of the document at http://www.privoxy.org/faq/. Please see the Contact section if you want to contact the
-            developers.
-          
-        
-        
-      
-      
-        
-          
-            Table of Contents
-          
-          
-            1. General Information
-          
-          
-            
-              
-                1.1. Who should give Privoxy a try?
-              
-              
-                1.2. Is Privoxy the best
-                choice for me?
-              
-              
-                1.3. What is a "proxy"? How does Privoxy work?
-              
-              
-                1.4. Does Privoxy do
-                anything more than ad blocking?
-              
-              
-                1.5. What is this new version of
-                "Junkbuster"?
-              
-              
-                1.6. Why "Privoxy"? Why change the name from Junkbuster
-                at all?
-              
-              
-                1.7. How does Privoxy differ
-                from the old Junkbuster?
-              
-              
-                1.8. How does Privoxy know
-                what is an ad, and what is not?
-              
-              
-                1.9. Can Privoxy make mistakes?
-                This does not sound very scientific.
-              
-              
-                1.10. Will I have to configure
-                Privoxy before I can use it?
-              
-              
-                1.11. Can Privoxy run as a server
-                on a network?
-              
-              
-                1.12. My browser does the
-                same things as Privoxy. Why should I use Privoxy at all?
-              
-              
-                1.13. Why should I trust
-                Privoxy?
-              
-              
-                1.14. Is there is a license or
-                fee? What about a warranty? Registration?
-              
-              
-                1.15. Can Privoxy remove
-                spyware? Adware? Viruses?
-              
-              
-                1.16. Can I use Privoxy with
-                other ad-blocking software?
-              
-              
-                1.17. I would like
-                to help you, what can I do?
-              
-              
-                
-                  
-                    1.17.1. Would you like
-                    to participate?
-                  
-                  
-                    1.17.2. Would you like to
-                    donate?
-                  
-                
-              
-            
-          
-          
-            2. Installation
-          
-          
-            
-              
-                2.1. Which browsers
-                are supported by Privoxy?
-              
-              
-                2.2. Which operating
-                systems are supported?
-              
-              
-                2.3. Can I use
-                Privoxy with my email client?
-              
-              
-                2.4. I just installed
-                Privoxy. Is there anything special I have to do now?
-              
-              
-                2.5. What is the proxy
-                address of Privoxy?
-              
-              
-                2.6. I just installed
-                Privoxy, and nothing is happening. All the ads are there.
-                What's wrong?
-              
-              
-                2.7. I get a "Privoxy is not being used" dummy page
-                although Privoxy is running and being used.
-              
-            
-          
-          
-            3. Configuration
-          
-          
-            
-              
-                3.1. What exactly is an
-                "actions" file?
-              
-              
-                3.2. The "actions" concept confuses me. Please list
-                some of these "actions".
-              
-              
-                3.3. How are actions
-                files configured? What is the easiest way to do this?
-              
-              
-                3.4. There are several
-                different "actions" files. What
-                are the differences?
-              
-              
-                3.5. Where can I get
-                updated Actions Files?
-              
-              
-                3.6. Can I use my old
-                config files?
-              
-              
-                3.7. Why is the
-                configuration so complicated?
-              
-              
-                3.8. How can I make my
-                Yahoo/Hotmail/Gmail account work?
-              
-              
-                3.9. What's the
-                difference between the "Cautious",
-                "Medium" and "Advanced" defaults?
-              
-              
-                3.10. Why can I
-                change the configuration with a browser? Does that not raise
-                security issues?
-              
-              
-                3.11. What is the default.filter file? What is a "filter"?
-              
-              
-                3.12. How can I set up
-                Privoxy to act as a proxy for my LAN?
-              
-              
-                3.13. Instead of ads, now
-                I get a checkerboard pattern. I don't want to see
-                anything.
-              
-              
-                3.14. Why would anybody
-                want to see a checkerboard pattern?
-              
-              
-                3.15. I see some images
-                being replaced with text instead of the checkerboard image.
-                Why and how do I get rid of this?
-              
-              
-                3.16. Can Privoxy run as
-                a service on Win2K/NT/XP?
-              
-              
-                3.17. How can I make
-                Privoxy work with other proxies?
-              
-              
-                3.18. Can I just set
-                Privoxy to use port 80 and thus avoid individual browser
-                configuration?
-              
-              
-                3.19. Can Privoxy
-                run as a "transparent" proxy?
-              
-              
-                3.20. Can Privoxy
-                run as a "intercepting" proxy?
-              
-              
-                3.21. How can I
-                configure Privoxy for use with Outlook?
-              
-              
-                3.22. How can I
-                have separate rules just for HTML mail?
-              
-              
-                3.23. I sometimes
-                notice cookies sneaking through. How?
-              
-              
-                3.24. Are all
-                cookies bad? Why?
-              
-              
-                3.25. How can I
-                allow permanent cookies for my trusted sites?
-              
-              
-                3.26. Can I have
-                separate configurations for different users?
-              
-              
-                3.27. Can I set-up
-                Privoxy as a whitelist of "good"
-                sites?
-              
-              
-                3.28. How can I turn
-                off ad-blocking?
-              
-              
-                3.29. How can I have
-                custom template pages, like the BLOCKED page?
-              
-              
-                3.30. How can I remove
-                the "Go There Anyway" link from
-                the BLOCKED page?
-              
-            
-          
-          
-            4. Miscellaneous
-          
-          
-            
-              
-                4.1. How much does Privoxy slow my
-                browsing down? This has to add extra time to browsing.
-              
-              
-                4.2. I notice considerable
-                delays in page requests. What's wrong?
-              
-              
-                4.3. What are
-                "http://config.privoxy.org/" and "http://p.p/"?
-              
-              
-                4.4. How can I submit new ads, or
-                report problems?
-              
-              
-                4.5. If I do submit missed ads,
-                will they be included in future updates?
-              
-              
-                4.6. Why doesn't anyone answer
-                my support request?
-              
-              
-                4.7. How can I hide my IP address?
-              
-              
-                4.8. Can Privoxy guarantee I am
-                anonymous?
-              
-              
-                4.9. A test site says I am not
-                using a Proxy.
-              
-              
-                4.10. How do I use Privoxy together
-                with Tor?
-              
-              
-                4.11. Might some things break
-                because header information or content is being altered?
-              
-              
-                4.12. Can Privoxy act as a "caching" proxy to speed up web
-                browsing?
-              
-              
-                4.13. What about as a firewall?
-                Can Privoxy protect me?
-              
-              
-                4.14. I have large empty spaces /
-                a checkerboard pattern now where ads used to be. Why?
-              
-              
-                4.15. How can Privoxy filter
-                Secure (HTTPS) URLs?
-              
-              
-                4.16. Privoxy runs as a "server". How secure is it? Do I need to
-                take any special precautions?
-              
-              
-                4.17. Can I temporarily disable
-                Privoxy?
-              
-              
-                4.18. When "disabled" is Privoxy totally out of the
-                picture?
-              
-              
-                4.19. How can I tell Privoxy to
-                totally ignore certain sites?
-              
-              
-                4.20. My logs show Privoxy "crunches" ads, but also its own
-                internal CGI pages. What is a "crunch"?
-              
-              
-                4.21. Can Privoxy effect files
-                that I download from a webserver? FTP server?
-              
-              
-                4.22. I just downloaded a Perl
-                script, and Privoxy altered it! Yikes, what is wrong!
-              
-              
-                4.23. Should I continue to use
-                a "HOSTS" file for
-                ad-blocking?
-              
-              
-                4.24. Where can I find more
-                information about Privoxy and related issues?
-              
-              
-                4.25. I've noticed that Privoxy
-                changes "Microsoft" to "MicroSuck"! Why are you manipulating my
-                browsing?
-              
-              
-                4.26. Does Privoxy produce "valid" HTML (or XHTML)?
-              
-              
-                4.27. How did you manage
-                to get Privoxy on my computer without my consent?
-              
-            
-          
-          
-            5. Troubleshooting
-          
-          
-            
-              
-                5.1. I cannot connect to any
-                websites. Or, I am getting "connection
-                refused" message with every web page. Why?
-              
-              
-                5.2. Why am I getting a 503
-                Error (WSAECONNREFUSED) on every page?
-              
-              
-                5.3. I just added a new rule,
-                but the steenkin ad is still getting through. How?
-              
-              
-                5.4. One of my favorite sites
-                does not work with Privoxy. What can I do?
-              
-              
-                5.5. After installing Privoxy, I
-                have to log in every time I start IE. What gives?
-              
-              
-                5.6. I cannot connect to any FTP
-                sites. Privoxy is blocking me.
-              
-              
-                5.7. In Mac OS X, I can't
-                configure Microsoft Internet Explorer to use Privoxy as the
-                HTTP proxy.
-              
-              
-                5.8. In Mac OS X, I
-                dragged the Privoxy folder to the trash in order to uninstall
-                it. Now the finder tells me I don't have sufficient
-                privileges to empty the trash.
-              
-              
-                5.9. In Mac OS X Panther
-                (10.3), images often fail to load and/or I experience random
-                delays in page loading. I'm using localhost as my browser's proxy setting.
-              
-              
-                5.10. I get a completely
-                blank page at one site. "View
-                Source" shows only: <html><body></body></html>.
-                Without Privoxy the page loads fine.
-              
-              
-                5.11. My logs show many
-                "Unable to get my own hostname"
-                lines. Why?
-              
-              
-                5.12. When I try to launch
-                Privoxy, I get an error message "port
-                8118 is already in use" (or similar wording). Why?
-              
-              
-                5.13. Pages with UTF-8
-                fonts are garbled.
-              
-              
-                5.14. Why are binary
-                files (such as images) corrupted when Privoxy is used?
-              
-              
-                5.15. What is the "demoronizer" and why is it there?
-              
-              
-                5.16. Why do I keep seeing
-                "PrivoxyWindowOpen()" in raw
-                source code?
-              
-              
-                5.17. I am getting too many
-                DNS errors like "404 No Such
-                Domain". Why can't Privoxy do this better?
-              
-              
-                5.18. At one site Privoxy just
-                hangs, and starts taking all CPU. Why is this?
-              
-              
-                5.19. I just installed
-                Privoxy, and all my browsing has slowed to a crawl. What
-                gives?
-              
-              
-                5.20. Why do my filters
-                work on some sites but not on others?
-              
-              
-                5.21. On some HTTPS sites
-                my browser warns me about unauthenticated content, the URL
-                bar doesn't get highlighted and the lock symbol appears to be
-                broken. What's going on?
-              
-              
-                5.22. I get selinux error
-                messages. How can I fix this?
-              
-              
-                5.23. I compiled Privoxy with Gentoo's portage and
-                it appears to be very slow. Why?
-              
-            
-          
-          
-            6. Contacting the developers, Bug
-            Reporting and Feature Requests
-          
-          
-            
-              
-                6.1. Get Support
-              
-              
-                6.2. Reporting Problems
-              
-              
-                
-                  
-                    6.2.1. Reporting Ads
-                    or Other Configuration Problems
-                  
-                  
-                    6.2.2. Reporting
-                    Bugs
-                  
-                
-              
-              
-                6.3. Request New
-                Features
-              
-              
-                6.4. Mailing Lists
-              
-            
-          
-          
-            7. Privoxy Copyright, License and
-            History
-          
-          
-            
-              
-                7.1. License
-              
-              
-                7.2. History
-              
-            
-          
-        
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  hr.c4 {text-align: left}
+  span.c3 {font-style: italic}
+  dt.c2 {font-weight: bold}
+  a.c1 {font-style: italic}
+  
+
+
+
+  
+    
+      Privoxy Frequently Asked
+      Questions
+
+      _{Copyright ©
+      2001-2011 by Privoxy
+      Developers}

+
+      $Id: faq.sgml,v 2.81 2011/09/04 11:10:12 fabiankeil
+      Exp $

+
+      
+        
+
+        This FAQ gives quick answers to frequently asked questions about
+        Privoxy. It is
+        not a substitute for the Privoxy User
+        Manual.
+
+        What is Privoxy?
+
+        Privoxy is a non-caching web proxy with advanced filtering
+        capabilities for enhancing privacy, modifying web page data and HTTP
+        headers, controlling access, and removing ads and other obnoxious
+        Internet junk. Privoxy has a flexible configuration and can be
+        customized to suit individual needs and tastes. It has application
+        for both stand-alone systems and multi-user networks.
+
+        Privoxy is Free Software and licensed under the GNU GPLv2.
+
+        Privoxy is an associated project of Software in the Public
+        Interest (SPI).
+
+        Helping hands and donations are welcome:
+
+        
+          
+            http://www.privoxy.org/faq/general.html#PARTICIPATE
+          
+
+          
+            http://www.privoxy.org/faq/general.html#DONATE
+          
+        
+
+        Please note that this document is a work in progress. This copy
+        represents the state at the release of version 3.0.18. You can find
+        the latest version of the document at http://www.privoxy.org/faq/. Please see the Contact section if you want to contact the
+        developers.
       
+      
     
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-             
-          
-             
-          
-            Next
-          

-             
-          
-             
-          
-            General Information
-          
+
+    
+      
+        Table of Contents
+
+        1. General Information
+
+        
+          
+            1.1. Who should give
+            Privoxy a try?
+
+            1.2. Is Privoxy the best
+            choice for me?
+
+            1.3. What is a "proxy"? How does Privoxy work?
+
+            1.4. Does Privoxy do
+            anything more than ad blocking?
+
+            1.5. What is this new version of
+            "Junkbuster"?
+
+            1.6. Why "Privoxy"? Why change the name from Junkbuster at
+            all?
+
+            1.7. How does Privoxy differ
+            from the old Junkbuster?
+
+            1.8. How does Privoxy know
+            what is an ad, and what is not?
+
+            1.9. Can Privoxy make mistakes?
+            This does not sound very scientific.
+
+            1.10. Will I have to configure
+            Privoxy before I can use it?
+
+            1.11. Can Privoxy run as a server
+            on a network?
+
+            1.12. My browser does the
+            same things as Privoxy. Why should I use Privoxy at all?
+
+            1.13. Why should I trust
+            Privoxy?
+
+            1.14. Is there is a license or
+            fee? What about a warranty? Registration?
+
+            1.15. Can Privoxy remove
+            spyware? Adware? Viruses?
+
+            1.16. Can I use Privoxy with
+            other ad-blocking software?
+
+            1.17. I would like
+            to help you, what can I do?
+
+            
+              
+                1.17.1. Would you like
+                to participate?
+
+                1.17.2. Would you like to
+                donate?
+              
+            
+          
+        
+
+        2. Installation
+
+        
+          
+            2.1. Which browsers
+            are supported by Privoxy?
+
+            2.2. Which operating
+            systems are supported?
+
+            2.3. Can I use
+            Privoxy with my email client?
+
+            2.4. I just installed
+            Privoxy. Is there anything special I have to do now?
+
+            2.5. What is the proxy
+            address of Privoxy?
+
+            2.6. I just installed
+            Privoxy, and nothing is happening. All the ads are there. What's
+            wrong?
+
+            2.7. I get a "Privoxy is not being used" dummy page although
+            Privoxy is running and being used.
+          
+        
+
+        3. Configuration
+
+        
+          
+            3.1. What exactly is an
+            "actions" file?
+
+            3.2. The "actions" concept confuses me. Please list some of
+            these "actions".
+
+            3.3. How are actions
+            files configured? What is the easiest way to do this?
+
+            3.4. There are several
+            different "actions" files. What are
+            the differences?
+
+            3.5. Where can I get
+            updated Actions Files?
+
+            3.6. Can I use my old
+            config files?
+
+            3.7. Why is the
+            configuration so complicated?
+
+            3.8. How can I make my
+            Yahoo/Hotmail/Gmail account work?
+
+            3.9. What's the
+            difference between the "Cautious",
+            "Medium" and "Advanced" defaults?
+
+            3.10. Why can I
+            change the configuration with a browser? Does that not raise
+            security issues?
+
+            3.11. What is the
+            default.filter file? What is a
+            "filter"?
+
+            3.12. How can I set up
+            Privoxy to act as a proxy for my LAN?
+
+            3.13. Instead of ads, now
+            I get a checkerboard pattern. I don't want to see
+            anything.
+
+            3.14. Why would anybody
+            want to see a checkerboard pattern?
+
+            3.15. I see some images
+            being replaced with text instead of the checkerboard image. Why
+            and how do I get rid of this?
+
+            3.16. Can Privoxy run as
+            a service on Win2K/NT/XP?
+
+            3.17. How can I make
+            Privoxy work with other proxies?
+
+            3.18. Can I just set
+            Privoxy to use port 80 and thus avoid individual browser
+            configuration?
+
+            3.19. Can Privoxy
+            run as a "transparent" proxy?
+
+            3.20. Can Privoxy
+            run as a "intercepting"
+            proxy?
+
+            3.21. How can I
+            configure Privoxy for use with Outlook?
+
+            3.22. How can I
+            have separate rules just for HTML mail?
+
+            3.23. I sometimes
+            notice cookies sneaking through. How?
+
+            3.24. Are all
+            cookies bad? Why?
+
+            3.25. How can I
+            allow permanent cookies for my trusted sites?
+
+            3.26. Can I have
+            separate configurations for different users?
+
+            3.27. Can I set-up
+            Privoxy as a whitelist of "good"
+            sites?
+
+            3.28. How can I turn
+            off ad-blocking?
+
+            3.29. How can I have
+            custom template pages, like the BLOCKED page?
+
+            3.30. How can I remove
+            the "Go There Anyway" link from the
+            BLOCKED page?
+          
+        
+
+        4. Miscellaneous
+
+        
+          
+            4.1. How much does Privoxy slow my
+            browsing down? This has to add extra time to browsing.
+
+            4.2. I notice considerable
+            delays in page requests. What's wrong?
+
+            4.3. What are
+            "http://config.privoxy.org/" and "http://p.p/"?
+
+            4.4. How can I submit new ads, or
+            report problems?
+
+            4.5. If I do submit missed ads,
+            will they be included in future updates?
+
+            4.6. Why doesn't anyone answer
+            my support request?
+
+            4.7. How can I hide my IP
+            address?
+
+            4.8. Can Privoxy guarantee I am
+            anonymous?
+
+            4.9. A test site says I am not
+            using a Proxy.
+
+            4.10. How do I use Privoxy together
+            with Tor?
+
+            4.11. Might some things break
+            because header information or content is being altered?
+
+            4.12. Can Privoxy act as a
+            "caching" proxy to speed up web
+            browsing?
+
+            4.13. What about as a firewall?
+            Can Privoxy protect me?
+
+            4.14. I have large empty spaces /
+            a checkerboard pattern now where ads used to be. Why?
+
+            4.15. How can Privoxy filter
+            Secure (HTTPS) URLs?
+
+            4.16. Privoxy runs as a
+            "server". How secure is it? Do I need
+            to take any special precautions?
+
+            4.17. Can I temporarily disable
+            Privoxy?
+
+            4.18. When "disabled" is Privoxy totally out of the
+            picture?
+
+            4.19. How can I tell Privoxy to
+            totally ignore certain sites?
+
+            4.20. My logs show Privoxy
+            "crunches" ads, but also its own
+            internal CGI pages. What is a "crunch"?
+
+            4.21. Can Privoxy effect files
+            that I download from a webserver? FTP server?
+
+            4.22. I just downloaded a Perl
+            script, and Privoxy altered it! Yikes, what is wrong!
+
+            4.23. Should I continue to use
+            a "HOSTS" file for
+            ad-blocking?
+
+            4.24. Where can I find more
+            information about Privoxy and related issues?
+
+            4.25. I've noticed that Privoxy
+            changes "Microsoft" to "MicroSuck"! Why are you manipulating my
+            browsing?
+
+            4.26. Does Privoxy produce
+            "valid" HTML (or XHTML)?
+
+            4.27. How did you manage
+            to get Privoxy on my computer without my consent?
+          
+        
+
+        5. Troubleshooting
+
+        
+          
+            5.1. I cannot connect to any
+            websites. Or, I am getting "connection
+            refused" message with every web page. Why?
+
+            5.2. Why am I getting a 503
+            Error (WSAECONNREFUSED) on every page?
+
+            5.3. I just added a new rule,
+            but the steenkin ad is still getting through. How?
+
+            5.4. One of my favorite sites
+            does not work with Privoxy. What can I do?
+
+            5.5. After installing Privoxy, I
+            have to log in every time I start IE. What gives?
+
+            5.6. I cannot connect to any FTP
+            sites. Privoxy is blocking me.
+
+            5.7. In Mac OS X, I can't
+            configure Microsoft Internet Explorer to use Privoxy as the HTTP
+            proxy.
+
+            5.8. In Mac OS X, I
+            dragged the Privoxy folder to the trash in order to uninstall it.
+            Now the finder tells me I don't have sufficient privileges to
+            empty the trash.
+
+            5.9. In Mac OS X Panther
+            (10.3), images often fail to load and/or I experience random
+            delays in page loading. I'm using localhost as my browser's proxy setting.
+
+            5.10. I get a completely
+            blank page at one site. "View Source"
+            shows only: <html><body></body></html>.
+            Without Privoxy the page loads fine.
+
+            5.11. My logs show many
+            "Unable to get my own hostname" lines.
+            Why?
+
+            5.12. When I try to launch
+            Privoxy, I get an error message "port 8118 is
+            already in use" (or similar wording). Why?
+
+            5.13. Pages with UTF-8
+            fonts are garbled.
+
+            5.14. Why are binary
+            files (such as images) corrupted when Privoxy is used?
+
+            5.15. What is the
+            "demoronizer" and why is it
+            there?
+
+            5.16. Why do I keep seeing
+            "PrivoxyWindowOpen()" in raw source
+            code?
+
+            5.17. I am getting too many
+            DNS errors like "404 No Such Domain".
+            Why can't Privoxy do this better?
+
+            5.18. At one site Privoxy just
+            hangs, and starts taking all CPU. Why is this?
+
+            5.19. I just installed
+            Privoxy, and all my browsing has slowed to a crawl. What
+            gives?
+
+            5.20. Why do my filters
+            work on some sites but not on others?
+
+            5.21. On some HTTPS sites
+            my browser warns me about unauthenticated content, the URL bar
+            doesn't get highlighted and the lock symbol appears to be broken.
+            What's going on?
+
+            5.22. I get selinux error
+            messages. How can I fix this?
+
+            5.23. I compiled
+            Privoxy with Gentoo's portage
+            and it appears to be very slow. Why?
+          
+        
+
+        6. Contacting the developers, Bug
+        Reporting and Feature Requests
+
+        
+          
+            6.1. Get
+            Support
+
+            6.2. Reporting
+            Problems
+
+            
+              
+                6.2.1. Reporting Ads
+                or Other Configuration Problems
+
+                6.2.2. Reporting
+                Bugs
+              
+            
+
+            6.3. Request New
+            Features
+
+            6.4. Mailing
+            Lists
+          
+        
+
+        7. Privoxy Copyright, License and
+        History
+
+        
+          
+            7.1. License
+
+            7.2. History
+          
+        
+      
     
-  
-
+  
+
+  
+    
+
+    
+      
+        
+
+        
 
+        
+      
+
+      
+        
+
+        
+
+        
+      
+        Next
    General Information
+  
+
+
diff --git a/doc/webserver/faq/installation.html b/doc/webserver/faq/installation.html
index 38841a88..47ecf734 100644
--- a/doc/webserver/faq/installation.html
+++ b/doc/webserver/faq/installation.html
@@ -1,288 +1,259 @@
-
+
+
 
-  
-    
-    
-      Installation
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
-        
-          
-          
-          
-        
-      
-            Privoxy Frequently Asked Questions
-          

-            Prev
-          
-          
-            Next
-          
-      
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  span.c2 {font-style: italic}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy Frequently Asked
+        Questions
Prev Next
+    
+  
+
+  
+    2.
+    Installation
+
+    
+      2.1. Which
+      browsers are supported by Privoxy?
+
+      Any browser that can be configured to use a proxy, which should be
+      virtually all browsers, including Firefox, Internet
+      Explorer, Opera, and
+      Safari among others. Direct browser
+      support is not an absolute requirement since Privoxy runs as a separate application and talks
+      to the browser in the standardized HTTP protocol, just like a web
+      server does.
     
-    
-      
-        2. Installation
-      
-      
-        
-          2.1. Which browsers are supported by
-          Privoxy?
-        
-        
-          Any browser that can be configured to use a proxy, which should be
-          virtually all browsers, including Firefox, Internet
-          Explorer, Opera, and Safari among others. Direct browser
-          support is not an absolute requirement since Privoxy runs as a separate application and
-          talks to the browser in the standardized HTTP protocol, just like a
-          web server does.
-        
-      
-      
-        
-          2.2. Which operating systems are supported?
-        
-        
-          At present, Privoxy is known to
-          run on Windows(95, 98, ME, 2000, XP, Vista), GNU/Linux (RedHat,
-          SuSE, Debian, Fedora, Gentoo, Slackware and others), Mac OSX, OS/2,
-          AmigaOS, FreeBSD, NetBSD, OpenBSD, Solaris, and various other
-          flavors of Unix.
-        
-        
-          But any operating system that runs TCP/IP, can conceivably take
-          advantage of Privoxy in a
-          networked situation where Privoxy
-          would run as a server on a LAN gateway. Then only the "gateway" needs to be running one of the above
-          operating systems.
-        
-        
-          Source code is freely available, so porting to other operating
-          systems is always a possibility.
-        
-      
-      
-        
-          2.3. Can I use Privoxy with my email
-          client?
-        
-        
-          As long as there is some way to set a HTTP proxy for the client,
-          then yes, any application can be used, whether it is strictly
-          speaking a "browser" or not. Though this
-          may not be the best approach for dealing with some of the common
-          abuses of HTML in email. See How can I configure Privoxy with Outlook? below for more on this.
-        
-        
-          Be aware that HTML email presents a number of unique security and
-          privacy related issues, that can require advanced skills to
-          overcome. The developers recommend using email clients that can be
-          configured to convert HTML to plain text for these reasons.
-        
-      
-      
-        
-          2.4. I just installed Privoxy. Is there
-          anything special I have to do now?
-        
-        
-          All browsers should be told to use Privoxy as a proxy by specifying the correct
-          proxy address and port number in the appropriate configuration area
-          for the browser. It's possible to combine Privoxy with a packet filter to intercept HTTP
-          requests even if the client isn't explicitly configured to use
-          Privoxy, but where possible,
-          configuring the client is recommended. See the User Manual for
-          more details. You should also flush your browser's memory and
-          disk cache to get rid of any cached junk items, and remove any
-          stored cookies.
-        
-      
-      
-        
-          2.5. What is the proxy address of Privoxy?
-        
-        
-          If you set up the Privoxy to run
-          on the computer you browse from (rather than your ISP's server or
-          some networked computer on a LAN), the proxy will be on 127.0.0.1 (sometimes referred to as "localhost", which is the special name used by every
-          computer on the Internet to refer to itself) and the port will be
-          8118 (unless you used the listen-address config option to tell Privoxy to run on a different port).
-        
-        
-          When configuring your browser's proxy settings you typically enter
-          the word "localhost" or the IP address
-          "127.0.0.1" in the boxes next to "HTTP" and "Secure"
-          (HTTPS) and then the number "8118" for
-          "port". This tells your browser to send
-          all web requests to Privoxy
-          instead of directly to the Internet.
-        
-        
-          Privoxy can also be used to proxy
-          for a Local Area Network. In this case, your would enter either the
-          IP address of the LAN host where Privoxy is running, or the equivalent
-          hostname, e.g. 192.168.1.1. Port
-          assignment would be same as above. Note that Privoxy doesn't listen on any LAN interfaces
-          by default.
-        
-        
-          Privoxy does not currently handle
-          any other protocols such as FTP, SMTP, IM, IRC, ICQ, etc.
-        
-      
-      
-        
-          2.6. I just installed Privoxy, and nothing is
-          happening. All the ads are there. What's wrong?
-        
-        
-          Did you configure your browser to use Privoxy as a proxy? It does not sound like it.
-          See above. You might also try flushing the browser's caches to
-          force a full re-reading of pages. You can verify that Privoxy is running, and your browser is
-          correctly configured by entering the special URL: http://p.p/. This should take you
-          to a page titled "This is Privoxy.."
-          with access to Privoxy's internal
-          configuration. If you see this, then you are good to go. If you
-          receive a page saying "Privoxy is not
-          running", then the browser is not set up to use your Privoxy installation. If you receive
-          anything else (probably nothing at all), it could either be that
-          the browser is not set up correctly, or that Privoxy is not running at all. Check the log
-          file. For instructions on starting Privoxy and browser configuration, see the chapter on starting Privoxy in the User
-          Manual.
-        
-      
-      
-        
-          2.7. I get a "Privoxy is not
-          being used" dummy page although Privoxy is running and being
-          used.
-        
-        
-          First, make sure that Privoxy is really running and being used by visiting http://p.p/. You should see
-          the Privoxy main page. If not, see
-          the chapter on starting Privoxy in the User
-          Manual.
-        
-        
-          Now if http://p.p/ works
-          for you, but other parts of Privoxy's web interface show the dummy page,
-          your browser has cached a redirection it encountered before Privoxy was being used. You need to
-          clear your browser's cache. Note that shift-reloading the dummy
-          page won't help, since that'll only refresh the dummy page, not the
-          redirection that lead you there.
-        
-        
-          The procedure for clearing the cache varies from browser to
-          browser. For example, Mozilla/Netscape users would click Edit --> Preferences --> Advanced --> Cache and then click both "Clear Memory Cache"
-          and "Clear Disk
-          Cache". In some Firefox versions it's Tools --> Options --> Privacy --> Cache and then click "Clear Cache Now".
-        
-      
+
+    
+      2.2. Which operating
+      systems are supported?
+
+      At present, Privoxy is known to run
+      on Windows(95, 98, ME, 2000, XP, Vista), GNU/Linux (RedHat, SuSE,
+      Debian, Fedora, Gentoo, Slackware and others), Mac OSX, OS/2, AmigaOS,
+      FreeBSD, NetBSD, OpenBSD, Solaris, and various other flavors of
+      Unix.
+
+      But any operating system that runs TCP/IP, can conceivably take
+      advantage of Privoxy in a networked
+      situation where Privoxy would run as a
+      server on a LAN gateway. Then only the "gateway" needs to be running one of the above operating
+      systems.
+
+      Source code is freely available, so porting to other operating
+      systems is always a possibility.
+    
+
+    
+      2.3. Can I
+      use Privoxy with my email client?
+
+      As long as there is some way to set a HTTP proxy for the client,
+      then yes, any application can be used, whether it is strictly speaking
+      a "browser" or not. Though this may not be
+      the best approach for dealing with some of the common abuses of HTML in
+      email. See How can I configure
+      Privoxy with Outlook? below for more on this.
+
+      Be aware that HTML email presents a number of unique security and
+      privacy related issues, that can require advanced skills to overcome.
+      The developers recommend using email clients that can be configured to
+      convert HTML to plain text for these reasons.
     
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-            Prev
-          
-            Home
-          
-            Next
-          

-            General Information
-          
-             
-          
-            Configuration
-          
+
+    
+      2.4. I just
+      installed Privoxy. Is there anything special I have to do now?
+
+      All browsers should be told to use Privoxy as a proxy by specifying the correct proxy
+      address and port number in the appropriate configuration area for the
+      browser. It's possible to combine Privoxy with a packet filter to intercept HTTP
+      requests even if the client isn't explicitly configured to use
+      Privoxy, but where possible,
+      configuring the client is recommended. See the User Manual for more
+      details. You should also flush your browser's memory and disk cache
+      to get rid of any cached junk items, and remove any stored cookies.
     
-  
-
 
+    
+      2.5. What is the
+      proxy address of Privoxy?
+
+      If you set up the Privoxy to run on
+      the computer you browse from (rather than your ISP's server or some
+      networked computer on a LAN), the proxy will be on 127.0.0.1 (sometimes referred to as "localhost", which is the special name used by every
+      computer on the Internet to refer to itself) and the port will be 8118
+      (unless you used the listen-address config option to tell Privoxy to run on a different port).
+
+      When configuring your browser's proxy settings you typically enter
+      the word "localhost" or the IP address
+      "127.0.0.1" in the boxes next to
+      "HTTP" and "Secure" (HTTPS) and then the number "8118" for "port". This tells
+      your browser to send all web requests to Privoxy instead of directly to the Internet.
+
+      Privoxy can also be used to proxy
+      for a Local Area Network. In this case, your would enter either the IP
+      address of the LAN host where Privoxy
+      is running, or the equivalent hostname, e.g. 192.168.1.1. Port assignment would be same as above.
+      Note that Privoxy doesn't listen on
+      any LAN interfaces by default.
+
+      Privoxy does not currently handle
+      any other protocols such as FTP, SMTP, IM, IRC, ICQ, etc.
+    
+
+    
+      2.6. I just installed
+      Privoxy, and nothing is happening. All the ads are there. What's
+      wrong?
+
+      Did you configure your browser to use Privoxy as a proxy? It does not sound like it. See
+      above. You might also try flushing the browser's caches to force a full
+      re-reading of pages. You can verify that Privoxy is running, and your browser is correctly
+      configured by entering the special URL: http://p.p/. This should take you to a page titled
+      "This is Privoxy.." with access to
+      Privoxy's internal configuration. If
+      you see this, then you are good to go. If you receive a page saying
+      "Privoxy is not running", then the browser
+      is not set up to use your Privoxy
+      installation. If you receive anything else (probably nothing at all),
+      it could either be that the browser is not set up correctly, or that
+      Privoxy is not running at all. Check
+      the log
+      file. For instructions on starting Privoxy and browser configuration, see the
+      chapter on starting Privoxy
+      in the User
+      Manual.
+    
+
+    
+      2.7. I get a
+      "Privoxy is not being used" dummy page
+      although Privoxy is running and being used.
+
+      First, make sure that Privoxy is really running and being used by visiting
+      http://p.p/. You should see the
+      Privoxy main page. If not, see the
+      chapter on starting Privoxy
+      in the User
+      Manual.
+
+      Now if http://p.p/ works for
+      you, but other parts of Privoxy's web
+      interface show the dummy page, your browser has cached a redirection it
+      encountered before Privoxy was being
+      used. You need to clear your browser's cache. Note that shift-reloading
+      the dummy page won't help, since that'll only refresh the dummy page,
+      not the redirection that lead you there.
+
+      The procedure for clearing the cache varies from browser to browser.
+      For example, Mozilla/Netscape users
+      would click Edit --> Preferences --> Advanced --> Cache
+      and then click both "Clear
+      Memory Cache" and "Clear Disk Cache". In some Firefox versions it's Tools --> Options
+      --> Privacy --> Cache and then click "Clear Cache Now".
+    
+  
+
+  
+    
+
+    
+      
+        
+
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
General Information   Configuration
+  
+
+
diff --git a/doc/webserver/faq/misc.html b/doc/webserver/faq/misc.html
index cc1b1baa..b028cf6d 100644
--- a/doc/webserver/faq/misc.html
+++ b/doc/webserver/faq/misc.html
@@ -1,1062 +1,929 @@
-
+
+
 
-  
-    
-    
-      Miscellaneous
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  table.c3 {background-color: #E0E0E0}
+  span.c2 {font-style: italic}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    

-            Privoxy Frequently Asked Questions
-          
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy Frequently Asked
+        Questions
Prev Next
+    
+  
+
+  
+    4. Miscellaneous
+
+    
+      4.1. How much does
+      Privoxy slow my browsing down? This has to add extra time to
+      browsing.
+
+      How much of an impact depends on many things, including the CPU of
+      the host system, how aggressive the configuration is, which specific
+      actions are being triggered, the size of the page, the bandwidth of the
+      connection, etc.
+
+      Overall, it should not slow you down any in real terms, and may
+      actually help speed things up since ads, banners and other junk are not
+      typically being retrieved and displayed. The actual processing time
+      required by Privoxy itself for each
+      page, is relatively small in the overall scheme of things, and happens
+      very quickly. This is typically more than offset by time saved not
+      downloading and rendering ad images and other junk content (if ad
+      blocking is being used).
+
+      "Filtering" content via the filter or deanimate-gifs actions may cause a perceived slowdown,
+      since the entire document needs to be buffered before displaying. And
+      on very large documents, filtering may have some measurable impact. How
+      much depends on the page size, the actual definition of the filter(s),
+      etc. See below. Most other actions have little to no impact on
+      speed.
+
+      Also, when filtering is enabled but zlib support isn't available,
+      compression is often disabled (see prevent-compression). This can have an impact on speed as
+      well, although it's probably smaller than you might think. Again, the
+      page size, etc. will determine how much of an impact.
+    
+
+    
+      4.2. I
+      notice considerable delays in page requests. What's wrong?
+
+      If you use any filter
+      action, such as filtering banners by size, web-bugs etc, or the
+      deanimate-gifs action, the entire document must be
+      loaded into memory in order for the filtering mechanism to work, and
+      nothing is sent to the browser during this time.
+
+      The loading time typically does not really change much in real
+      numbers, but the feeling is different, because most browsers are able
+      to start rendering incomplete content, giving the user a feeling of "it
+      works". This effect is more noticeable on slower dialup connections.
+      Extremely large documents may have some impact on the time to load the
+      page where there is filtering being done. But overall, the difference
+      should be very minimal. If there is a big impact, then probably some
+      other situation is contributing (like anti-virus software).
+
+      Filtering is automatically disabled for inappropriate MIME types.
+      But note that if the web server mis-reports the MIME type, then content
+      that should not be filtered, could be. Privoxy only knows how to differentiate filterable
+      content because of the MIME type as reported by the server, or because
+      of some configuration setting that enables/disables filtering.
+    
+
+    
+      4.3. What are
+      "http://config.privoxy.org/" and "http://p.p/"?
+
+      http://config.privoxy.org/ is the address of Privoxy's built-in user interface, and http://p.p/ is a shortcut for it.
+
+      Since Privoxy sits between your web
+      browser and the Internet, it can simply intercept requests for these
+      addresses and answer them with its built-in "web
+      server".
+
+      This also makes for a good test for your browser configuration: If
+      entering the URL http://config.privoxy.org/ takes you to a page saying
+      "This is Privoxy ...", everything is OK. If
+      you get a page saying "Privoxy is not
+      working" instead, then your browser didn't use Privoxy for the request, hence it could not be
+      intercepted, and you have accessed the real web site at config.privoxy.org.
+    
+
+    
+      4.4. How can I submit
+      new ads, or report problems?
+
+      Please see the Contact section for
+      various ways to interact with the developers.
+    
+
+    
+      4.5. If I do submit
+      missed ads, will they be included in future updates?
+
+      Whether such submissions are eventually included in the default.action configuration file depends on how
+      significant the issue is. We of course want to address any potential
+      problem with major, high-profile sites such as Google, Yahoo, etc. Any site
+      with global or regional reach, has a good chance of being a candidate.
+      But at the other end of the spectrum are any number of smaller,
+      low-profile sites such as for local clubs or schools. Since their reach
+      and impact are much less, they are best handled by inclusion in the
+      user's user.action, and thus would be
+      unlikely to be included.
+    
+
+    
+      4.6. Why doesn't
+      anyone answer my support request?
+
+      Rest assured that it has been read and considered. Why it is not
+      answered, could be for various reasons, including no one has a good
+      answer for it, no one has had time to yet investigate it thoroughly, it
+      has been reported numerous times already, or because not enough
+      information was provided to help us help you. Your efforts are not
+      wasted, and we do appreciate them.
+    
+
+    
+      4.7. How can I hide my IP
+      address?
+
+      If you run both the browser and Privoxy locally, you cannot hide your IP address
+      with Privoxy or ultimately any other
+      software alone. The server needs to know your IP address so that it
+      knows where to send the responses back.
+
+      There are many publicly usable "anonymous" proxies out there, which
+      provide a further level of indirection between you and the web
+      server.
+
+      However, these proxies are called "anonymous" because you don't need
+      to authenticate, not because they would offer any real anonymity. Most
+      of them will log your IP address and make it available to the
+      authorities in case you violate the law of the country they run in. In
+      fact you can't even rule out that some of them only exist to *collect*
+      information on (those suspicious) people with a more than average
+      preference for privacy.
+
+      If you want to hide your IP address from most adversaries, you
+      should consider chaining Privoxy with
+      Tor. The
+      configuration details can be found in How
+      do I use Privoxy together with
+      Tor section just below.
+    
+
+    
+      4.8. Can Privoxy
+      guarantee I am anonymous?
+
+      No. Your chances of remaining anonymous are improved, but unless you
+      chain Privoxy with Tor or a similar proxy and know what you're
+      doing when it comes to configuring the rest of your system, you should
+      assume that everything you do on the Web can be traced back to you.
+
+      Privoxy can remove various
+      information about you, and allows you more freedom to decide which sites
+      you can trust, and what details you want to reveal. But it neither
+      hides your IP address, nor can it guarantee that the rest of the system
+      behaves correctly. There are several possibilities how a web sites can
+      find out who you are, even if you are using a strict Privoxy configuration and chained it with
+      Tor.
+
+      Most of Privoxy's privacy-enhancing
+      features can be easily subverted by an insecure browser configuration,
+      therefore you should use a browser that can be configured to only
+      execute code from trusted sites, and be careful which sites you trust.
+      For example there is no point in having Privoxy modify the User-Agent header, if websites
+      can get all the information they want through JavaScript, ActiveX,
+      Flash, Java etc.
+
+      A few browsers disclose the user's email address in certain
+      situations, such as when transferring a file by FTP. Privoxy does not filter FTP. If you need this
+      feature, or are concerned about the mail handler of your browser
+      disclosing your email address, you might consider products such as
+      NSClean.
+
+      Browsers available only as binaries could use non-standard headers
+      to give out any information they can have access to: see the
+      manufacturer's license agreement. It's impossible to anticipate and
+      prevent every breach of privacy that might occur. The professionally
+      paranoid prefer browsers available as source code, because anticipating
+      their behavior is easier. Trust the source, Luke!
+    
+
+    
+      4.9. A test site says I
+      am not using a Proxy.
+
+      Good! Actually, they are probably testing for some other kinds of
+      proxies. Hiding yourself completely would require additional steps.
+    
+
+    
+      4.10. How do I use Privoxy
+      together with Tor?
+
+      Before you configure Privoxy to use
+      Tor, please
+      follow the User Manual chapters 2. Installation
+      and 5. Startup
+      to make sure Privoxy itself is setup
+      correctly.
+
+      If it is, refer to Tor's
+      extensive documentation to learn how to install Tor, and make sure Tor's logfile says that "Tor
+      has successfully opened a circuit" and it "looks like client functionality is working".
+
+      If either Tor or Privoxy isn't working, their combination most
+      likely will neither. Testing them on their own will also help you to
+      direct problem reports to the right audience. If Privoxy isn't working, don't bother the
+      Tor developers. If Tor isn't working, don't send bug reports to the
+      Privoxy Team.
+
+      If you verified that Privoxy and
+      Tor are working, it is time to connect
+      them. As far as Privoxy is concerned,
+      Tor is just another proxy that can be
+      reached by socks4, socks4a and socks5. Most likely you are interested
+      in Tor to increase your anonymity
+      level, therefore you should use socks5, to make sure DNS requests are
+      done through Tor and thus invisible to
+      your local network. Using socks4a would work too, but with socks5 you
+      get more precise error messages.
+
+      Since Privoxy 3.0.5, its main configuration file
+      is already prepared for Tor, if you
+      are using a default Tor configuration
+      and run it on the same system as Privoxy, you just have to edit the forwarding
+      section and uncomment the line:
+
+      
-          
-          
-          
         
-            Prev
-          
-          
-            Next
+          
+            +#        forward-socks5             /     127.0.0.1:9050 .
+
+
           
         
       
-      
-    
-    
-      
-        4. Miscellaneous
-      
-      
-        
-          4.1. How much does Privoxy slow my browsing down?
-          This has to add extra time to browsing.
-        
-        
-          How much of an impact depends on many things, including the CPU of
-          the host system, how aggressive the configuration is, which
-          specific actions are being triggered, the size of the page, the
-          bandwidth of the connection, etc.
-        
-        
-          Overall, it should not slow you down any in real terms, and may
-          actually help speed things up since ads, banners and other junk are
-          not typically being retrieved and displayed. The actual processing
-          time required by Privoxy itself
-          for each page, is relatively small in the overall scheme of things,
-          and happens very quickly. This is typically more than offset by
-          time saved not downloading and rendering ad images and other junk
-          content (if ad blocking is being used).
-        
-        
-          "Filtering" content via the filter or deanimate-gifs actions may cause a perceived
-          slowdown, since the entire document needs to be buffered before
-          displaying. And on very large documents, filtering may have some
-          measurable impact. How much depends on the page size, the actual
-          definition of the filter(s), etc. See below. Most other actions
-          have little to no impact on speed.
-        
-        
-          Also, when filtering is enabled but zlib support isn't available,
-          compression is often disabled (see prevent-compression). This can have an impact on speed
-          as well, although it's probably smaller than you might think.
-          Again, the page size, etc. will determine how much of an impact.
-        
-      
-      
-        
-          4.2. I notice considerable delays in page
-          requests. What's wrong?
-        
-        
-          If you use any filter action, such as filtering banners by size,
-          web-bugs etc, or the deanimate-gifs action, the entire document must be
-          loaded into memory in order for the filtering mechanism to work,
-          and nothing is sent to the browser during this time.
-        
-        
-          The loading time typically does not really change much in real
-          numbers, but the feeling is different, because most browsers are
-          able to start rendering incomplete content, giving the user a
-          feeling of "it works". This effect is more noticeable on slower
-          dialup connections. Extremely large documents may have some impact
-          on the time to load the page where there is filtering being done.
-          But overall, the difference should be very minimal. If there is a
-          big impact, then probably some other situation is contributing
-          (like anti-virus software).
-        
-        
-          Filtering is automatically disabled for inappropriate MIME types.
-          But note that if the web server mis-reports the MIME type, then
-          content that should not be filtered, could be. Privoxy only knows how to differentiate
-          filterable content because of the MIME type as reported by the
-          server, or because of some configuration setting that
-          enables/disables filtering.
-        
-      
-      
-        
-          4.3. What are "http://config.privoxy.org/" and
-          "http://p.p/"?
-        
-        
-          http://config.privoxy.org/ is the address of Privoxy's built-in user interface, and
-          http://p.p/ is a shortcut
-          for it.
-        
-        
-          Since Privoxy sits between your
-          web browser and the Internet, it can simply intercept requests for
-          these addresses and answer them with its built-in "web server".
-        
-        
-          This also makes for a good test for your browser configuration: If
-          entering the URL http://config.privoxy.org/ takes you to a page saying
-          "This is Privoxy ...", everything is OK.
-          If you get a page saying "Privoxy is not
-          working" instead, then your browser didn't use Privoxy for the request, hence it could not be
-          intercepted, and you have accessed the real web site at config.privoxy.org.
-        
-      
-      
-        
-          4.4. How can I submit new ads, or report
-          problems?
-        
-        
-          Please see the Contact section for
-          various ways to interact with the developers.
-        
-      
-      
-        
-          4.5. If I do submit missed ads, will they be
-          included in future updates?
-        
-        
-          Whether such submissions are eventually included in the default.action configuration file depends on how
-          significant the issue is. We of course want to address any
-          potential problem with major, high-profile sites such as Google, Yahoo, etc. Any
-          site with global or regional reach, has a good chance of being a
-          candidate. But at the other end of the spectrum are any number of
-          smaller, low-profile sites such as for local clubs or schools.
-          Since their reach and impact are much less, they are best handled
-          by inclusion in the user's user.action,
-          and thus would be unlikely to be included.
-        
-      
-      
-        
-          4.6. Why doesn't anyone answer my support
-          request?
-        
-        
-          Rest assured that it has been read and considered. Why it is not
-          answered, could be for various reasons, including no one has a good
-          answer for it, no one has had time to yet investigate it
-          thoroughly, it has been reported numerous times already, or because
-          not enough information was provided to help us help you. Your
-          efforts are not wasted, and we do appreciate them.
-        
-      
-      
-        
-          4.7. How can I hide my IP address?
-        
-        
-          If you run both the browser and Privoxy locally, you cannot hide your IP
-          address with Privoxy or ultimately
-          any other software alone. The server needs to know your IP address
-          so that it knows where to send the responses back.
-        
-        
-          There are many publicly usable "anonymous" proxies out there, which
-          provide a further level of indirection between you and the web
-          server.
-        
-        
-          However, these proxies are called "anonymous" because you don't
-          need to authenticate, not because they would offer any real
-          anonymity. Most of them will log your IP address and make it
-          available to the authorities in case you violate the law of the
-          country they run in. In fact you can't even rule out that some of
-          them only exist to *collect* information on (those suspicious)
-          people with a more than average preference for privacy.
-        
-        
-          If you want to hide your IP address from most adversaries, you
-          should consider chaining Privoxy
-          with Tor.
-          The configuration details can be found in How do I use Privoxy
-          together with Tor section just
-          below.
-        
-      
-      
-        
-          4.8. Can Privoxy guarantee I am anonymous?
-        
-        
-          No. Your chances of remaining anonymous are improved, but unless
-          you chain Privoxy with Tor or a similar proxy and know what
-          you're doing when it comes to configuring the rest of your system,
-          you should assume that everything you do on the Web can be traced
-          back to you.
-        
-        
-          Privoxy can remove various
-          information about you, and allows you more freedom to decide which sites you
-          can trust, and what details you want to reveal. But it neither
-          hides your IP address, nor can it guarantee that the rest of the
-          system behaves correctly. There are several possibilities how a web
-          sites can find out who you are, even if you are using a strict
-          Privoxy configuration and chained
-          it with Tor.
-        
-        
-          Most of Privoxy's
-          privacy-enhancing features can be easily subverted by an insecure
-          browser configuration, therefore you should use a browser that can
-          be configured to only execute code from trusted sites, and be
-          careful which sites you trust. For example there is no point in
-          having Privoxy modify the
-          User-Agent header, if websites can get all the information they
-          want through JavaScript, ActiveX, Flash, Java etc.
-        
-        
-          A few browsers disclose the user's email address in certain
-          situations, such as when transferring a file by FTP. Privoxy does not filter FTP. If you need this
-          feature, or are concerned about the mail handler of your browser
-          disclosing your email address, you might consider products such as
-          NSClean.
-        
-        
-          Browsers available only as binaries could use non-standard headers
-          to give out any information they can have access to: see the
-          manufacturer's license agreement. It's impossible to anticipate and
-          prevent every breach of privacy that might occur. The
-          professionally paranoid prefer browsers available as source code,
-          because anticipating their behavior is easier. Trust the source,
-          Luke!
-        
-      
-      
-        
-          4.9. A test site says I am not using a Proxy.
-        
-        
-          Good! Actually, they are probably testing for some other kinds of
-          proxies. Hiding yourself completely would require additional steps.
-        
-      
-      
-        
-          4.10. How do I use Privoxy together with Tor?
-        
-        
-          Before you configure Privoxy to
-          use Tor,
-          please follow the User Manual chapters 2.
-          Installation and 5. Startup to make sure Privoxy itself is setup correctly.
-        
-        
-          If it is, refer to Tor's
-          extensive documentation to learn how to install Tor, and make sure Tor's logfile says that "Tor has successfully opened a circuit" and it "looks like client functionality is working".
-        
-        
-          If either Tor or Privoxy isn't working, their combination most
-          likely will neither. Testing them on their own will also help you
-          to direct problem reports to the right audience. If Privoxy isn't working, don't bother the Tor developers. If Tor isn't working, don't send bug reports to
-          the Privoxy Team.
-        
-        
-          If you verified that Privoxy and
-          Tor are working, it is time to
-          connect them. As far as Privoxy is
-          concerned, Tor is just another
-          proxy that can be reached by socks4, socks4a and socks5. Most
-          likely you are interested in Tor
-          to increase your anonymity level, therefore you should use socks5,
-          to make sure DNS requests are done through Tor and thus invisible to your local network.
-          Using socks4a would work too, but with socks5 you get more precise
-          error messages.
-        
-        
-          Since Privoxy 3.0.5, its main configuration
-          file is already prepared for Tor, if you are using a default Tor configuration and run it on the same
-          system as Privoxy, you just have
-          to edit the forwarding section and uncomment the line:
-        
-        
-        
-        
-          
-            
-          
-        
--#        forward-socks5             /     127.0.0.1:9050 .
-
-            
-
-        
-          This is enough to reach the Internet, but additionally you might
-          want to uncomment the following forward rules, to make sure your
-          local network is still reachable through Privoxy:
-        
-        
-        
-        
-          
-            
-+
+      This is enough to reach the Internet, but additionally you might
+      want to uncomment the following forward rules, to make sure your local
+      network is still reachable through Privoxy:
+
+      
+        
+          
-          
-        
+             #        forward         192.168.*.*/     .
 #        forward            10.*.*.*/     .
 #        forward           127.*.*.*/     .
+
 
-            
-
-        
-          Unencrypted connections to systems in these address ranges will be
-          as (un)secure as the local network is, but the alternative is that
-          your browser can't reach the network at all. Then again, that may
-          actually be desired and if you don't know for sure that your
-          browser has to be able to reach the local network, there's no
-          reason to allow it.
-        
-        
-          If you want your browser to be able to reach servers in your local
-          network by using their names, you will need additional exceptions
-          that look like this:
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      Unencrypted connections to systems in these address ranges will be
+      as (un)secure as the local network is, but the alternative is that your
+      browser can't reach the network at all. Then again, that may actually
+      be desired and if you don't know for sure that your browser has to be
+      able to reach the local network, there's no reason to allow it.
+
+      If you want your browser to be able to reach servers in your local
+      network by using their names, you will need additional exceptions that
+      look like this:
+
+      
+        
+          
-          
-        
+             #        forward           localhost/     .
+
 
-            
-
-        
-          Save the modified configuration file and open http://config.privoxy.org/show-status/ in your browser,
-          confirm that Privoxy has reloaded
-          its configuration and that there are no other forward lines, unless
-          you know that you need them. If everything looks good, refer to Tor Faq 4.2 to learn how to verify that you are
-          really using Tor.
-        
-        
-          Afterward, please take the time to at least skim through the rest
-          of Tor's documentation. Make sure
-          you understand what Tor does, why
-          it is no replacement for application level security, and why you
-          probably don't want to use it for unencrypted logins.
-        
-      
-      
-        
-          4.11. Might some things break because header
-          information or content is being altered?
-        
-        
-          Definitely. It is common for sites to use browser type, browser
-          version, HTTP header content, and various other techniques in order
-          to dynamically decide what to display and how to display it. What
-          you see, and what I see, might be very different. There are many,
-          many ways that this can be handled, so having hard and fast rules,
-          is tricky.
-        
-        
-          The "User-Agent" is sometimes used in
-          this way to identify the browser, and adjust content accordingly.
-        
-        
-          Also, different browsers use different encodings of non-English
-          characters, certain web servers convert pages on-the-fly according
-          to the User Agent header. Giving a "User
-          Agent" with the wrong operating system or browser
-          manufacturer causes some sites in these languages to be garbled;
-          Surfers to Eastern European sites should change it to something
-          closer. And then some page access counters work by looking at the
-          "Referer" header; they may fail or break
-          if unavailable. The weather maps of Intellicast have been blocked
-          by their server when no "Referer" or
-          cookie is provided, is another example. (But you can forge both
-          headers without giving information away). There are many other ways
-          things can go wrong when trying to fool a web server. The results
-          of which could inadvertently cause pages to load incorrectly,
-          partially, or even not at all. And there may be no obvious clues as
-          to just what went wrong, or why. Nowhere will there be a message
-          that says "Turn off fast-redirects or
-          else! "
-        
-        
-          Similar thoughts apply to modifying JavaScript, and, to a lesser
-          degree, HTML elements.
-        
-        
-          If you have problems with a site, you will have to adjust your
-          configuration accordingly. Cookies are probably the most likely
-          adjustment that may be required, but by no means the only one.
-        
-      
-      
-        
-          4.12. Can Privoxy act as a "caching" proxy to speed up web browsing?
-        
-        
-          No, it does not have this ability at all. You want something like
-          Squid or Polipo for this. And, yes, before you ask, Privoxy can co-exist with other kinds of
-          proxies like Squid. See the forwarding chapter in the user manual for
-          details.
-        
-      
-      
-        
-          4.13. What about as a firewall? Can Privoxy
-          protect me?
-        
-        
-          Not in the way you mean, or in the way some firewall vendors claim
-          they can. Privoxy can help protect
-          your privacy, but can't protect your system from intrusion
-          attempts. It is, of course, perfectly possible to use both.
-        
-      
-      
-        
-          4.14. I have large empty spaces / a checkerboard
-          pattern now where ads used to be. Why?
-        
-        
-          It is technically possible to eliminate banners and ads in a way
-          that frees their allocated page space. This could easily be done by
-          blocking with Privoxy's filters,
-          and eliminating the entire image references from the HTML page
-          source.
-        
-        
-          But, this would consume considerably more CPU resources (IOW, slow
-          things down), would likely destroy the layout of some web pages
-          which rely on the banners utilizing a certain amount of page space,
-          and might fail in other cases, where the screen space is reserved
-          (e.g. by HTML tables for instance). Also, making ads and banners
-          disappear without any trace complicates troubleshooting, and would
-          sooner or later be problematic.
-        
-        
-          The better alternative is to instead let them stay, and block the
-          resulting requests for the banners themselves as is now the case.
-          This leaves either empty space, or the familiar checkerboard
-          pattern.
-        
-        
-          So the developers won't support this in the default configuration,
-          but you can of course define appropriate filters yourself to
-          achieve this.
-        
-      
-      
-        
-          4.15. How can Privoxy filter Secure (HTTPS)
-          URLs?
-        
-        
-          Since secure HTTP connections are encrypted SSL sessions between
-          your browser and the secure site, and are meant to be reliably
-          secure, there
-          is little that Privoxy can do but
-          hand the raw gibberish data though from one end to the other
-          unprocessed.
-        
-        
-          The only exception to this is blocking by host patterns, as the
-          client needs to tell Privoxy the
-          name of the remote server, so that Privoxy can establish the connection. If that
-          name matches a host-only pattern, the connection will be blocked.
-        
-        
-          As far as ad blocking is concerned, this is less of a restriction
-          than it may seem, since ad sources are often identifiable by the
-          host name, and often the banners to be placed in an encrypted page
-          come unencrypted nonetheless for efficiency reasons, which exposes
-          them to the full power of Privoxy's ad blocking.
-        
-        
-          "Content cookies" (those that are
-          embedded in the actual HTML or JS page content, see filter{content-cookies}), in an SSL transaction
-          will be impossible to block under these conditions. Fortunately,
-          this does not seem to be a very common scenario since most cookies
-          come by traditional means.
-        
-      
-      
-        
-          4.16. Privoxy runs as a "server". How secure is it? Do I need to take any
-          special precautions?
-        
-        
-          On Unix-like systems, Privoxy can
-          run as a non-privileged user, which is how we recommend it be run.
-          Also, by default Privoxy listens
-          to requests from "localhost" only.
-        
-        
-          The server aspect of Privoxy is
-          not itself directly exposed to the Internet in this configuration.
-          If you want to have Privoxy serve
-          as a LAN proxy, this will have to be opened up to allow for LAN
-          requests. In this case, we'd recommend you specify only the LAN
-          gateway address, e.g. 192.168.1.1, in the main Privoxy configuration file and check all access control and security options. All LAN hosts can
-          then use this as their proxy address in the browser proxy
-          configuration, but Privoxy will
-          not listen on any external interfaces. ACLs can be defined in
-          addition, and using a firewall is always good too. Better safe than
-          sorry.
-        
-      
-      
-        
-          4.17. Can I temporarily disable Privoxy?
-        
-        
-          Privoxy doesn't have a transparent
-          proxy mode, but you can toggle off blocking and content filtering.
-        
-        
-          The easiest way to do that is to point your browser to the remote
-          toggle URL: http://config.privoxy.org/toggle.
-        
-        
-          See the Bookmarklets section of the User
-          Manual for an easy way to access this feature. Note that this
-          is a feature that may need to be enabled in the main config file.
-        
-      
-      
-        
-          4.18. When "disabled" is Privoxy totally out of the
-          picture?
-        
-        
-          No, this just means all optional filtering and actions are
-          disabled. Privoxy is still acting
-          as a proxy, but just doing less of the things that Privoxy would normally be expected to do. It
-          is still a "middle-man" in the
-          interaction between your browser and web sites. See below to bypass
-          the proxy.
-        
-      
-      
-        
-          4.19. How can I tell Privoxy to totally ignore
-          certain sites?
-        
-        
-          Bypassing a proxy, or proxying based on arbitrary criteria, is
-          purely a browser configuration issue, not a Privoxy issue. Modern browsers typically do
-          have settings for not proxying certain sites. Check your browser's
-          help files.
-        
-      
-      
-        
-          4.20. My logs show Privoxy "crunches" ads, but also its own internal CGI pages.
-          What is a "crunch"?
-        
-        
-          A "crunch" simply means Privoxy intercepted something, nothing more. Often this is
-          indeed ads or banners, but Privoxy
-          uses the same mechanism for trapping requests for its own internal
-          pages. For instance, a request for Privoxy's configuration page at: http://config.privoxy.org, is intercepted (i.e. it does
-          not go out to the 'net), and the familiar CGI configuration is
-          returned to the browser, and the log consequently will show a "crunch".
-        
-        
-          Since version 3.0.7, Privoxy will also log the crunch reason. If
-          you are using an older version you might want to upgrade.
-        
-      
-      
-        
-          4.21. Can Privoxy effect files that I download
-          from a webserver? FTP server?
-        
-        
-          From the webserver's perspective, there is no difference between
-          viewing a document (i.e. a page), and downloading a file. The same
-          is true of Privoxy. If there is a
-          match for a block pattern, it will still be blocked, and of
-          course this is obvious.
-        
-        
-          Filtering is potentially more of a concern since the results are
-          not always so obvious, and the effects of filtering are there
-          whether the file is simply viewed, or downloaded. And potentially
-          whether the content is some obnoxious advertisement, or Mr. Jimmy's
-          latest/greatest source code jewel. Of course, one of these
-          presumably is "bad" content that we
-          don't want, and the other is "good"
-          content that we do want. Privoxy
-          is blind to the differences, and can only distinguish "good from bad" by the configuration parameters
-          we give it.
-        
-        
-          Privoxy knows the differences in
-          files according to the "Content Type" as
-          reported by the webserver. If this is reported accurately (e.g.
-          "application/zip" for a zip archive),
-          then Privoxy knows to ignore these
-          where appropriate. Privoxy
-          potentially can filter HTML as well as plain text documents,
-          subject to configuration parameters of course. Also, documents that
-          are of an unknown type (generally assumed to be "text/plain") can be filtered, as will those that
-          might be incorrectly reported by the webserver. If such a file is a
-          downloaded file that is intended to be saved to disk, then any
-          content that might have been altered by filtering, will be saved
-          too, for these (probably rare) cases.
-        
-        
-          Note that versions later than 3.0.2 do NOT filter document types
-          reported as "text/plain". Prior to this,
-          Privoxy did filter this document
-          type.
-        
-        
-          In short, filtering is "ON" if a) the
-          content type as reported by the webserver is appropriate and b) the
-          configuration allows it (or at least does not disallow it). That's
-          it. There is no magic cookie anywhere to say this is "good" and this is "bad".
-          It's the configuration that lets it all happen or not.
-        
-        
-          If you download text files, you probably do not want these to be
-          filtered, particularly if the content is source code, or other
-          critical content. Source code sometimes might be mistaken for
-          Javascript (i.e. the kind that might open a pop-up window). It is
-          recommended to turn off filtering for download sites (particularly
-          if the content may be plain text files and you are using version
-          3.0.2 or earlier) in your user.action
-          file. And also, for any site or page where making any changes at all to the
-          content is to be avoided.
-        
-        
-          Privoxy does not do FTP at all,
-          only HTTP and HTTPS (SSL) protocols.
-        
-      
-      
-        
-          4.22. I just downloaded a Perl script, and
-          Privoxy altered it! Yikes, what is wrong!
-        
-        
-          Please read above.
-        
-      
-      
-        
-          4.23. Should I continue to use a "HOSTS" file for ad-blocking?
-        
-        
-          One time-tested technique to defeat common ads is to trick the
-          local DNS system by giving a phony IP address for the ad generator
-          in the local HOSTS file, typically using
-          127.0.0.1, aka localhost. This effectively blocks the ad.
-        
-        
-          There is no reason to use this technique in conjunction with Privoxy. Privoxy does essentially the same thing, much
-          more elegantly and with much more flexibility. A large HOSTS file, in fact, not only duplicates effort,
-          but may get in the way and seriously slow down your system. It is
-          recommended to remove such entries from your HOSTS file. If you think your hosts list is
-          neglected by Privoxy's
-          configuration, consider adding your list to your user.action file:
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      Save the modified configuration file and open http://config.privoxy.org/show-status/ in your browser,
+      confirm that Privoxy has reloaded its
+      configuration and that there are no other forward lines, unless you
+      know that you need them. If everything looks good, refer to Tor Faq 4.2 to learn how to verify that you are
+      really using Tor.
+
+      Afterward, please take the time to at least skim through the rest of
+      Tor's documentation. Make sure you
+      understand what Tor does, why it is no
+      replacement for application level security, and why you probably don't
+      want to use it for unencrypted logins.
+    
+
+    
+      4.11. Might some things
+      break because header information or content is being altered?
+
+      Definitely. It is common for sites to use browser type, browser
+      version, HTTP header content, and various other techniques in order to
+      dynamically decide what to display and how to display it. What you see,
+      and what I see, might be very different. There are many, many ways that
+      this can be handled, so having hard and fast rules, is tricky.
+
+      The "User-Agent" is sometimes used in
+      this way to identify the browser, and adjust content accordingly.
+
+      Also, different browsers use different encodings of non-English
+      characters, certain web servers convert pages on-the-fly according to
+      the User Agent header. Giving a "User Agent"
+      with the wrong operating system or browser manufacturer causes some
+      sites in these languages to be garbled; Surfers to Eastern European
+      sites should change it to something closer. And then some page access
+      counters work by looking at the "Referer"
+      header; they may fail or break if unavailable. The weather maps of
+      Intellicast have been blocked by their server when no "Referer" or cookie is provided, is another example.
+      (But you can forge both headers without giving information away). There
+      are many other ways things can go wrong when trying to fool a web
+      server. The results of which could inadvertently cause pages to load
+      incorrectly, partially, or even not at all. And there may be no obvious
+      clues as to just what went wrong, or why. Nowhere will there be a
+      message that says "Turn off fast-redirects
+      or else! "
+
+      Similar thoughts apply to modifying JavaScript, and, to a lesser
+      degree, HTML elements.
+
+      If you have problems with a site, you will have to adjust your
+      configuration accordingly. Cookies are probably the most likely
+      adjustment that may be required, but by no means the only one.
+    
+
+    
+      4.12. Can Privoxy act as
+      a "caching" proxy to speed up web
+      browsing?
+
+      No, it does not have this ability at all. You want something like
+      Squid or
+      Polipo for this. And, yes, before you ask, Privoxy can co-exist with other kinds of proxies
+      like Squid. See the forwarding
+      chapter in the user manual for details.
+    
+
+    
+      4.13. What about as a
+      firewall? Can Privoxy protect me?
+
+      Not in the way you mean, or in the way some firewall vendors claim
+      they can. Privoxy can help protect
+      your privacy, but can't protect your system from intrusion attempts. It
+      is, of course, perfectly possible to use both.
+    
+
+    
+      4.14. I have large empty
+      spaces / a checkerboard pattern now where ads used to be. Why?
+
+      It is technically possible to eliminate banners and ads in a way
+      that frees their allocated page space. This could easily be done by
+      blocking with Privoxy's filters, and
+      eliminating the entire image
+      references from the HTML page source.
+
+      But, this would consume considerably more CPU resources (IOW, slow
+      things down), would likely destroy the layout of some web pages which
+      rely on the banners utilizing a certain amount of page space, and might
+      fail in other cases, where the screen space is reserved (e.g. by HTML
+      tables for instance). Also, making ads and banners disappear without
+      any trace complicates troubleshooting, and would sooner or later be
+      problematic.
+
+      The better alternative is to instead let them stay, and block the
+      resulting requests for the banners themselves as is now the case. This
+      leaves either empty space, or the familiar checkerboard pattern.
+
+      So the developers won't support this in the default configuration,
+      but you can of course define appropriate filters yourself to achieve
+      this.
+    
+
+    
+      4.15. How can Privoxy
+      filter Secure (HTTPS) URLs?
+
+      Since secure HTTP connections are encrypted SSL sessions between
+      your browser and the secure site, and are meant to be reliably
+      secure, there is little that
+      Privoxy can do but hand the raw
+      gibberish data though from one end to the other unprocessed.
+
+      The only exception to this is blocking by host patterns, as the
+      client needs to tell Privoxy the name
+      of the remote server, so that Privoxy
+      can establish the connection. If that name matches a host-only pattern,
+      the connection will be blocked.
+
+      As far as ad blocking is concerned, this is less of a restriction
+      than it may seem, since ad sources are often identifiable by the host
+      name, and often the banners to be placed in an encrypted page come
+      unencrypted nonetheless for efficiency reasons, which exposes them to
+      the full power of Privoxy's ad
+      blocking.
+
+      "Content cookies" (those that are
+      embedded in the actual HTML or JS page content, see filter{content-cookies}), in an SSL transaction will be
+      impossible to block under these conditions. Fortunately, this does not
+      seem to be a very common scenario since most cookies come by
+      traditional means.
+    
+
+    
+      4.16. Privoxy runs as a
+      "server". How secure is it? Do I need to
+      take any special precautions?
+
+      On Unix-like systems, Privoxy can
+      run as a non-privileged user, which is how we recommend it be run.
+      Also, by default Privoxy listens to
+      requests from "localhost" only.
+
+      The server aspect of Privoxy is not
+      itself directly exposed to the Internet in this configuration. If you
+      want to have Privoxy serve as a LAN
+      proxy, this will have to be opened up to allow for LAN requests. In
+      this case, we'd recommend you specify only the LAN gateway address,
+      e.g. 192.168.1.1, in the main Privoxy
+      configuration file and check all access
+      control and security options. All LAN hosts can then use this as
+      their proxy address in the browser proxy configuration, but
+      Privoxy will not listen on any
+      external interfaces. ACLs can be defined in addition, and using a
+      firewall is always good too. Better safe than sorry.
+    
+
+    
+      4.17. Can I
+      temporarily disable Privoxy?
+
+      Privoxy doesn't have a transparent
+      proxy mode, but you can toggle off blocking and content filtering.
+
+      The easiest way to do that is to point your browser to the remote
+      toggle URL: http://config.privoxy.org/toggle.
+
+      See the Bookmarklets section of the User
+      Manual for an easy way to access this feature. Note that this is a
+      feature that may need to be enabled in the main config file.
+    
+
+    
+      4.18. When
+      "disabled" is Privoxy totally out of the
+      picture?
+
+      No, this just means all optional filtering and actions are disabled.
+      Privoxy is still acting as a proxy,
+      but just doing less of the things that Privoxy would normally be expected to do. It is
+      still a "middle-man" in the interaction
+      between your browser and web sites. See below to bypass the proxy.
+    
+
+    
+      4.19. How can I tell
+      Privoxy to totally ignore certain sites?
+
+      Bypassing a proxy, or proxying based on arbitrary criteria, is
+      purely a browser configuration issue, not a Privoxy issue. Modern browsers typically do have
+      settings for not proxying certain sites. Check your browser's help
+      files.
+    
+
+    
+      4.20. My logs show
+      Privoxy "crunches" ads, but also its own
+      internal CGI pages. What is a "crunch"?
+
+      A "crunch" simply means Privoxy intercepted something, nothing more. Often this is
+      indeed ads or banners, but Privoxy
+      uses the same mechanism for trapping requests for its own internal
+      pages. For instance, a request for Privoxy's configuration page at: http://config.privoxy.org, is intercepted (i.e. it does not
+      go out to the 'net), and the familiar CGI configuration is returned to
+      the browser, and the log consequently will show a "crunch".
+
+      Since version 3.0.7, Privoxy will also log the crunch reason. If you
+      are using an older version you might want to upgrade.
+    
+
+    
+      4.21. Can Privoxy
+      effect files that I download from a webserver? FTP server?
+
+      From the webserver's perspective, there is no difference between
+      viewing a document (i.e. a page), and downloading a file. The same is
+      true of Privoxy. If there is a match
+      for a block
+      pattern, it will still be blocked, and of course this is obvious.
+
+      Filtering is potentially more of a concern since the results are not
+      always so obvious, and the effects of filtering are there whether the
+      file is simply viewed, or downloaded. And potentially whether the
+      content is some obnoxious advertisement, or Mr. Jimmy's latest/greatest
+      source code jewel. Of course, one of these presumably is "bad" content that we don't want, and the other is
+      "good" content that we do want. Privoxy is blind to the differences, and can only
+      distinguish "good from bad" by the
+      configuration parameters we
+      give it.
+
+      Privoxy knows the differences in
+      files according to the "Content Type" as
+      reported by the webserver. If this is reported accurately (e.g.
+      "application/zip" for a zip archive), then
+      Privoxy knows to ignore these where
+      appropriate. Privoxy potentially can
+      filter HTML as well as plain text documents, subject to configuration
+      parameters of course. Also, documents that are of an unknown type
+      (generally assumed to be "text/plain") can
+      be filtered, as will those that might be incorrectly reported by the
+      webserver. If such a file is a downloaded file that is intended to be
+      saved to disk, then any content that might have been altered by
+      filtering, will be saved too, for these (probably rare) cases.
+
+      Note that versions later than 3.0.2 do NOT filter document types
+      reported as "text/plain". Prior to this,
+      Privoxy did filter this document
+      type.
+
+      In short, filtering is "ON" if a) the
+      content type as reported by the webserver is appropriate and b) the configuration allows it (or at
+      least does not disallow it). That's it. There is no magic cookie
+      anywhere to say this is "good" and this is
+      "bad". It's the configuration that lets it
+      all happen or not.
+
+      If you download text files, you probably do not want these to be
+      filtered, particularly if the content is source code, or other critical
+      content. Source code sometimes might be mistaken for Javascript (i.e.
+      the kind that might open a pop-up window). It is recommended to turn
+      off filtering for download sites (particularly if the content may be
+      plain text files and you are using version 3.0.2 or earlier) in your
+      user.action file. And also, for any site or
+      page where making any changes
+      at all to the content is to be avoided.
+
+      Privoxy does not do FTP at all,
+      only HTTP and HTTPS (SSL) protocols.
+    
+
+    
+      4.22. I just
+      downloaded a Perl script, and Privoxy altered it! Yikes, what is
+      wrong!
+
+      Please read above.
+    
+
+    
+      4.23. Should I
+      continue to use a "HOSTS" file for
+      ad-blocking?
+
+      One time-tested technique to defeat common ads is to trick the local
+      DNS system by giving a phony IP address for the ad generator in the
+      local HOSTS file, typically using 127.0.0.1, aka localhost. This
+      effectively blocks the ad.
+
+      There is no reason to use this technique in conjunction with
+      Privoxy. Privoxy does essentially the same thing, much more
+      elegantly and with much more flexibility. A large HOSTS file, in fact, not only duplicates effort, but
+      may get in the way and seriously slow down your system. It is
+      recommended to remove such entries from your HOSTS file. If you think your hosts list is neglected
+      by Privoxy's configuration, consider
+      adding your list to your user.action
+      file:
+
+      
+        
+          
-          
-        
+               { +block }
    www.ad.example1.com
    ad.example2.com
    ads.galore.example.com
    etc.example.com
 
-            
-      
-      
-        
-          4.24. Where can I find more information about
-          Privoxy and related issues?
-        
-        
-          Other references and sites of interest to Privoxy users:
-        
-        
-        
-        
-          
-            
-              
-            
-          
-        
-                http://www.privoxy.org/, the Privoxy Home page.
-              
-        
-          
-            
-              
-            
-          
-        
-                http://www.privoxy.org/faq/, the Privoxy FAQ.
-              
-        
-          
-            
-              
-            
-          
-        
-                http://www.privoxy.org/developer-manual/, the
-                Privoxy developer manual.
-              
-        
-          
-            
-              
-            
-          
-        
-                https://sourceforge.net/projects/ijbswa/, the
-                Project Page for Privoxy on
-                SourceForge.
-              
-        
-          
-            
-              
-            
-          
-        
-                http://config.privoxy.org/, the web-based user
-                interface. Privoxy must be
-                running for this to work. Shortcut: http://p.p/
-              
-        
-          
-            
-              
-            
-          
-        
-                https://sourceforge.net/tracker/?group_id=11118&atid=460288,
-                to submit "misses" and other
-                configuration related suggestions to the developers.
-              
-        
-          
-            
-              
-            
-          
-        
-                http://www.junkbusters.com/ht/en/cookies.html, an
-                explanation how cookies are used to track web users.
-              
-        
-          
-            
-              
-            
-          
-        
-                http://www.junkbusters.com/ijb.html, the original
-                Internet Junkbuster.
-              
-        
-          
-            
-              
-            
-          
-        
-                http://www.squid-cache.org/, a popular caching
-                proxy, which is often used together with Privoxy.
-              
-        
-          
-            
-              
-            
-          
-        
-                http://www.pps.jussieu.fr/~jch/software/polipo/,
-                Polipo is a caching proxy
-                with advanced features like pipelining, multiplexing and
-                caching of partial instances. In many setups it can be used
-                as Squid replacement.
-              
-        
-          
-            
-              
-            
-          
-        
-                https://www.torproject.org/, Tor can help anonymize web browsing, web
-                publishing, instant messaging, IRC, SSH, and other
-                applications.
-              
-      
-      
-        
-          4.25. I've noticed that Privoxy changes "Microsoft" to "MicroSuck"! Why are you manipulating my
-          browsing?
-        
-        
-          We're not. The text substitutions that you are seeing are disabled
-          in the default configuration as shipped. You have either manually
-          activated the "fun" filter which is clearly labeled "Text replacements for subversive browsing
-          fun!" or you are using an older Privoxy version and have
-          implicitly activated it by choosing the "Advanced" profile in the web-based editor. Please
-          upgrade.
-        
-      
-      
-        
-          4.26. Does Privoxy produce "valid" HTML (or XHTML)?
-        
-        
-          Privoxy generates HTML in both its own "templates", and possibly whenever there are text
-          substitutions via a Privoxy
-          filter. While this should always conform to the HTML 4.01
-          specifications, it has not been validated against this or any other
-          standard.
-        
-      
-      
-        
-          4.27. How did you manage to get Privoxy
-          on my computer without my consent?
-        
-        
-          We didn't. We make Privoxy available for download, but we don't go
-          around installing it on other people's systems behind their back.
-          If you discover Privoxy running on your system and are sure you
-          didn't install it yourself, somebody else did. You may not even be
-          running the real Privoxy, but maybe something else that only
-          pretends to be Privoxy, or maybe something that is based on the
-          real Privoxy, but has been modified.
-        
-        
-          Lately there have been reports of problems with some kind of
-          Privoxy versions that come preinstalled on some Netbooks. Some of
-          the problems described are inconsistent with the behaviour of
-          official Privoxy versions, which suggests that the preinstalled
-          software may contain vendor modifications that we don't know about
-          and thus can't debug.
-        
-        
-          Privoxy's license allows vendor
-          modifications, but the vendor has to comply with the license, which
-          involves informing the user about the changes and to make the
-          changes available under the same license as Privoxy itself.
-        
-        
-          If you are having trouble with a modified Privoxy version, please
-          try to talk to whoever made the modifications before reporting the
-          problem to us. Please also try to convince whoever made the
-          modifications to talk to us. If you think somebody gave you a
-          modified Privoxy version without complying to the license, please
-          let us know.
-        
-      
-    
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-            Prev
-          
-            Home
-          
-            Next
-          

-            Configuration
-          
-             
-          
-            Troubleshooting
           
         
       
     
-  
-
 
+    
+      4.24. Where can I find
+      more information about Privoxy and related issues?
+
+      Other references and sites of interest to Privoxy users:
+
+      
+        
+          
+            
+          
+        
+      http://www.privoxy.org/, the Privoxy Home page.
+
+      
+        
+          
+            
+          
+        
+      http://www.privoxy.org/faq/, the Privoxy FAQ.
+
+      
+        
+          
+            
+          
+        
+      http://www.privoxy.org/developer-manual/, the
+            Privoxy developer manual.
+
+      
+        
+          
+            
+          
+        
+      https://sourceforge.net/projects/ijbswa/, the Project
+            Page for Privoxy on SourceForge.
+
+      
+        
+          
+            
+          
+        
+      http://config.privoxy.org/, the web-based user
+            interface. Privoxy must be
+            running for this to work. Shortcut: http://p.p/
+
+      
+        
+          
+            
+          
+        
+      https://sourceforge.net/tracker/?group_id=11118&atid=460288,
+            to submit "misses" and other
+            configuration related suggestions to the developers.
+
+      
+        
+          
+            
+          
+        
+      http://www.junkbusters.com/ht/en/cookies.html,
+            an explanation how cookies are used to track web users.
+
+      
+        
+          
+            
+          
+        
+      http://www.junkbusters.com/ijb.html, the original
+            Internet Junkbuster.
+
+      
+        
+          
+            
+          
+        
+      http://www.squid-cache.org/, a popular caching proxy,
+            which is often used together with Privoxy.
+
+      
+        
+          
+            
+          
+        
+      http://www.pps.jussieu.fr/~jch/software/polipo/,
+            Polipo is a caching proxy with
+            advanced features like pipelining, multiplexing and caching of
+            partial instances. In many setups it can be used as Squid replacement.
+
+      
+        
+          
+            
+          
+        
+      https://www.torproject.org/, Tor can help anonymize web browsing, web
+            publishing, instant messaging, IRC, SSH, and other
+            applications.
+    
+
+    
+      4.25. I've noticed
+      that Privoxy changes "Microsoft" to
+      "MicroSuck"! Why are you manipulating my
+      browsing?
+
+      We're not. The text substitutions that you are seeing are disabled
+      in the default configuration as shipped. You have either manually
+      activated the "fun"
+      filter which is clearly labeled "Text replacements
+      for subversive browsing fun!" or you are using an older Privoxy
+      version and have implicitly activated it by choosing the "Advanced" profile in the web-based editor. Please
+      upgrade.
+    
+
+    
+      4.26. Does Privoxy produce
+      "valid" HTML (or XHTML)?
+
+      Privoxy generates HTML in both its own "templates", and possibly whenever there are text
+      substitutions via a Privoxy filter.
+      While this should always conform to the HTML 4.01 specifications, it
+      has not been validated against this or any other standard.
+    
+
+    
+      4.27. How did you manage to get Privoxy on my
+      computer without my consent?
+
+      We didn't. We make Privoxy available for download, but we don't go
+      around installing it on other people's systems behind their back. If
+      you discover Privoxy running on your system and are sure you didn't
+      install it yourself, somebody else did. You may not even be running the
+      real Privoxy, but maybe something else that only pretends to be
+      Privoxy, or maybe something that is based on the real Privoxy, but has
+      been modified.
+
+      Lately there have been reports of problems with some kind of Privoxy
+      versions that come preinstalled on some Netbooks. Some of the problems
+      described are inconsistent with the behaviour of official Privoxy
+      versions, which suggests that the preinstalled software may contain
+      vendor modifications that we don't know about and thus can't debug.
+
+      Privoxy's license allows vendor
+      modifications, but the vendor has to comply with the license, which
+      involves informing the user about the changes and to make the changes
+      available under the same license as Privoxy itself.
+
+      If you are having trouble with a modified Privoxy version, please
+      try to talk to whoever made the modifications before reporting the
+      problem to us. Please also try to convince whoever made the
+      modifications to talk to us. If you think somebody gave you a modified
+      Privoxy version without complying to the license, please let us
+      know.
+    
+  
+
+  
+    
+
+    
+      
+        
+
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Configuration   Troubleshooting
+  
+
+
diff --git a/doc/webserver/faq/trouble.html b/doc/webserver/faq/trouble.html
index 141a835e..12fc01d7 100644
--- a/doc/webserver/faq/trouble.html
+++ b/doc/webserver/faq/trouble.html
@@ -1,166 +1,156 @@
-
+
+
 
-  
-    
-    
-      Troubleshooting
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
-        
-          
-          
-          
-        
-      
-            Privoxy Frequently Asked Questions
-          

-            Prev
-          
-          
-            Next
-          
-      
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  span.c3 {font-style: italic}
+  table.c2 {background-color: #E0E0E0}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy Frequently Asked
+        Questions
Prev Next
+    
+  
+
+  
+    5.
+    Troubleshooting
+
+    
+      5.1. I cannot connect
+      to any websites. Or, I am getting "connection
+      refused" message with every web page. Why?
+
+      There are several possibilities:
+
+      
+        
+          Privoxy is not running.
+          Solution: verify that Privoxy is
+          installed correctly, has not crashed, and is indeed running. Turn
+          on Privoxy's logging, and look at
+          the logs to see what they say.
+        
+
+        
+          Or your browser is configured for a different port than what
+          Privoxy is using. Solution: verify
+          that Privoxy and your browser are
+          set to the same port (listen-address).
+        
+
+        
+          Or if using a forwarding rule, you have a configuration problem
+          or a problem with a host in the forwarding chain. Solution:
+          temporarily alter your configuration and take the forwarders out of
+          the equation.
+        
+
+        
+          Or you have a firewall that is interfering and blocking you.
+          Solution: try disabling or removing the firewall as a simple
+          test.
+        
+      
     
-    
-      
-        5. Troubleshooting
-      
-      
-        
-          5.1. I cannot connect to any websites. Or, I am
-          getting "connection refused" message
-          with every web page. Why?
-        
-        
-          There are several possibilities:
-        
-        
-          
-            
-              Privoxy is not running.
-              Solution: verify that Privoxy
-              is installed correctly, has not crashed, and is indeed running.
-              Turn on Privoxy's logging, and
-              look at the logs to see what they say.
-            
-          
-          
-            
-              Or your browser is configured for a different port than what
-              Privoxy is using. Solution:
-              verify that Privoxy and your
-              browser are set to the same port (listen-address).
-            
-          
-          
-            
-              Or if using a forwarding rule, you have a configuration problem
-              or a problem with a host in the forwarding chain. Solution:
-              temporarily alter your configuration and take the forwarders
-              out of the equation.
-            
-          
-          
-            
-              Or you have a firewall that is interfering and blocking you.
-              Solution: try disabling or removing the firewall as a simple
-              test.
-            
-          
-        
-      
-      
-        
-          5.2. Why am I getting a 503 Error
-          (WSAECONNREFUSED) on every page?
-        
-        
-          More than likely this is a problem with your TCP/IP networking.
-          ZoneAlarm has been reported to cause this symptom -- even if not
-          running! The solution is to either fight the ZA configuration, or
-          uninstall ZoneAlarm, and then find something better behaved in its
-          place. Other personal firewall type products may cause similar type
-          problems if not configured correctly.
-        
-      
-      
-        
-          5.3. I just added a new rule, but the steenkin ad
-          is still getting through. How?
-        
-        
-          If the ad had been displayed before you added its URL, it will
-          probably be held in the browser's cache for some time, so it will
-          be displayed without the need for any request to the server, and
-          Privoxy will not be involved.
-          Flush the browser's caches, and then try again.
-        
-        
-          If this doesn't help, you probably have an error in the rule you
-          applied. Try pasting the full URL of the offending ad into http://config.privoxy.org/show-url-info and see if it
-          really matches your new rule. Blocking ads is like blocking spam: a
-          lot of tinkering is required to stay ahead of the game. And
-          remember you need to block the URL of the ad in question, which may
-          be entirely different from the site URL itself. Most ads are hosted
-          on different servers than the main site itself. If you right-click
-          on the ad, you should be able to get all the relevant information
-          you need. Alternately, you can find the correct URL by looking at
-          Privoxy's logs (you may need to
-          enable logging in the main config file if its disabled).
-        
-        
-          Below is a slightly modified real-life log snippet that originates
-          with one requested URL: www.example.com
-          (name of site was changed for this example, the number of requests
-          is real). You can see in this the complexity of what goes into
-          making up this one "page". There are
-          eight different domains involved here, with thirty two separate
-          URLs requested in all, making up all manner of images, Shockwave
-          Flash, JavaScript, CSS stylesheets, scripts, and other related
-          content. Some of this content is obviously "good" or "bad", but not
-          all. Many of the more questionable looking requests, are going to
-          outside domains that seem to be identifying themselves with
-          suspicious looking names, making our job a little easier. Privoxy has "crunched" (meaning caught and BLOCKED) quite a few
-          items in this example, but perhaps missed a few as well.
-        
-        
-          
-            
-+
+    
+      5.2. Why am I
+      getting a 503 Error (WSAECONNREFUSED) on every page?
+
+      More than likely this is a problem with your TCP/IP networking.
+      ZoneAlarm has been reported to cause this symptom -- even if not
+      running! The solution is to either fight the ZA configuration, or
+      uninstall ZoneAlarm, and then find something better behaved in its
+      place. Other personal firewall type products may cause similar type
+      problems if not configured correctly.
+    
+
+    
+      5.3. I just added a
+      new rule, but the steenkin ad is still getting through. How?
+
+      If the ad had been displayed before you added its URL, it will
+      probably be held in the browser's cache for some time, so it will be
+      displayed without the need for any request to the server, and
+      Privoxy will not be involved. Flush
+      the browser's caches, and then try again.
+
+      If this doesn't help, you probably have an error in the rule you
+      applied. Try pasting the full URL of the offending ad into http://config.privoxy.org/show-url-info and see if it really
+      matches your new rule. Blocking ads is like blocking spam: a lot of
+      tinkering is required to stay ahead of the game. And remember you need
+      to block the URL of the ad in question, which may be entirely different
+      from the site URL itself. Most ads are hosted on different servers than
+      the main site itself. If you right-click on the ad, you should be able
+      to get all the relevant information you need. Alternately, you can find
+      the correct URL by looking at Privoxy's logs (you may need to enable logging in
+      the main config file if its disabled).
+
+      Below is a slightly modified real-life log snippet that originates
+      with one requested URL: www.example.com (name
+      of site was changed for this example, the number of requests is real).
+      You can see in this the complexity of what goes into making up this one
+      "page". There are eight different domains
+      involved here, with thirty two separate URLs requested in all, making
+      up all manner of images, Shockwave Flash, JavaScript, CSS stylesheets,
+      scripts, and other related content. Some of this content is obviously
+      "good" or "bad",
+      but not all. Many of the more questionable looking requests, are going
+      to outside domains that seem to be identifying themselves with
+      suspicious looking names, making our job a little easier. Privoxy has "crunched"
+      (meaning caught and BLOCKED) quite a few items in this example, but
+      perhaps missed a few as well.
+
+      
+        
+          
-          
-        
+             Request: www.example.com/
 Request: www.example.com/favicon.ico
 Request: img.example.com/main.css
@@ -195,636 +185,552 @@ Request: 66.70.21.80/img/pixel.gif
 Request: www.adtrak.net/adlog.php?bannerid=1309&clientid=439&zoneid=58&source=Ua&block=86400 crunch! (Blocked)
 Request: 66.70.21.80/scripts/click.php?hid=a71b9f6504b0c5681fa5&si=Ua
 
-            
-
-        
-          Despite 12 out of 32 requests being blocked, the page looked, and
-          seemed to behave perfectly "normal"
-          (minus some ads, of course).
-        
-      
-      
-        
-          5.4. One of my favorite sites does not work with
-          Privoxy. What can I do?
-        
-        
-          First verify that it is indeed a Privoxy problem, by toggling off Privoxy through http://config.privoxy.org/toggle (the toggle feature may
-          need to be enabled in the main config),
-          and then shift-reloading the problem page (i.e. holding down the
-          shift key while clicking reload. Alternatively, flush your
-          browser's disk and memory caches).
-        
-        
-          If the problem went away, we know we have a configuration related
-          problem. Now go to http://config.privoxy.org/show-url-info and paste the
-          full URL of the page in question into the prompt. See which actions
-          are being applied to the URL, and which matches in which actions
-          files are responsible for that. It might be helpful also to look at
-          your logs for this site too, to see what else might be happening
-          (note: logging may need to be enabled in the main config file).
-          Many sites are complex and require a number of related pages to
-          help present their content. Look at what else might be used by the
-          page in question, and what of that might be required. Now, armed with
-          this information, go to http://config.privoxy.org/show-status and select the
-          appropriate actions files for editing.
-        
-        
-          You can now either look for a section which disables the actions
-          that you suspect to cause the problem and add a pattern for your
-          site there, or make up a completely new section for your site. In
-          any case, the recommended way is to disable only the prime suspect,
-          reload the problem page, and only if the problem persists, disable
-          more and more actions until you have identified the culprit. You
-          may or may not want to turn the other actions on again. Remember to
-          flush your browser's caches in between any such changes!
-        
-        
-          Alternately, if you are comfortable with a text editor, you can
-          accomplish the same thing by editing the appropriate actions file.
-          Probably the easiest way to deal with such problems when editing by
-          hand is to add your site to a { fragile }
-          section in user.action, which is an alias
-          that turns off most "dangerous" actions,
-          but is also likely to turn off more actions then needed, and thus
-          lower your privacy and protection more than necessary,
-        
-        
-          Troubleshooting actions is discussed in more detail in the User
-          Manual appendix, Troubleshooting: the Anatomy of an Action.
-          There is also an actions tutorial with general configuration information
-          and examples.
-        
-        
-          As a last resort, you can always see if your browser has a setting
-          that will bypass the proxy setting for selective sites. Modern
-          browsers can do this.
-        
-      
-      
-        
-          5.5. After installing Privoxy, I have to log in every
-          time I start IE. What gives?
-        
-        
-          This is a quirk that effects the installation of Privoxy, in conjunction with Internet Explorer
-          and Internet Connection Sharing on Windows 2000 and Windows XP. The
-          symptoms may appear to be corrupted or invalid DUN settings, or
-          passwords.
-        
-        
-          When setting up an NT based Windows system with Privoxy you may find that things do not seem
-          to be doing what you expect. When you set your system up you will
-          probably have set up Internet Connection Sharing (ICS) with Dial up
-          Networking (DUN) when logged in with administrator privileges. You
-          will probably have made this DUN connection available to other
-          accounts that you may have set-up on your system. E.g. Mum or Dad
-          sets up the system and makes accounts suitably configured for the
-          kids.
-        
-        
-          When setting up Privoxy in this
-          environment you will have to alter the proxy set-up of Internet
-          Explorer (IE) for the specific DUN connection on which you wish to
-          use Privoxy. When you do this the
-          ICS DUN set-up becomes user specific. In this instance you will see
-          no difference if you change the DUN connection under the account
-          used to set-up the connection. However when you do this from
-          another user you will notice that the DUN connection changes to
-          make available to "Me only". You will also find that you have to
-          store the password under each different user!
-        
-        
-          The reason for this is that each user's set-up for IE is user
-          specific. Each set-up DUN connection and each LAN connection in IE
-          store the settings for each user individually. As such this
-          enforces individual configurations rather than common ones. Hence
-          the first time you use a DUN connection after re-booting your
-          system it may not perform as you expect, and prompt you for the
-          password. Just set and save the password again and all should be
-          OK.
-        
-        
-          [Thanks to Ray Griffith for this submission.]
-        
-      
-      
-        
-          5.6. I cannot connect to any FTP sites. Privoxy is
-          blocking me.
-        
-        
-          Privoxy cannot act as a proxy for
-          FTP traffic, so do not configure your browser to use Privoxy as an FTP proxy. The same is true for
-          any protocol other than
-          HTTP or HTTPS (SSL).
-        
-        
-          Most browsers understand FTP as well as HTTP. If you connect to a
-          site, with a URL like ftp://ftp.example.com, your browser is making an FTP
-          connection, and not a HTTP connection. So while your browser may
-          speak FTP, Privoxy does not, and
-          cannot proxy such traffic.
-        
-        
-          To complicate matters, some systems may have a generic "proxy" setting, which will enable various
-          protocols, including both HTTP and FTP proxying! So it is possible
-          to accidentally enable FTP proxying in these cases. And of course,
-          if this happens, Privoxy will
-          indeed cause problems since it does not know FTP. Newer version
-          will give a sane error message if a FTP connection is attempted.
-          Just disable the FTP setting and all will be well again.
-        
-        
-          Will Privoxy ever proxy FTP
-          traffic? Unlikely. There just is not much reason, and the work to
-          make this happen is more than it may seem.
-        
-      
-      
-        
-          5.7. In Mac OS X, I can't configure Microsoft
-          Internet Explorer to use Privoxy as the HTTP proxy.
-        
-        
-          Microsoft Internet Explorer (in versions like 5.1) respects
-          system-wide network settings. In order to change the HTTP proxy,
-          open System Preferences, and click on the Network icon. In the
-          settings pane that comes up, click on the Proxies tab. Ensure the
-          "Web Proxy (HTTP)" checkbox is checked and enter 127.0.0.1 in the entry field. Enter 8118 in the Port field. The next time you start IE,
-          it should reflect these values.
-        
-      
-      
-        
-          5.8. In Mac OS X, I dragged the Privoxy
-          folder to the trash in order to uninstall it. Now the finder tells
-          me I don't have sufficient privileges to empty the trash.
-        
-        
-          Note: This ONLY applies to privoxy 3.0.6 and earlier.
-        
-        
-          Just dragging the Privoxy folder
-          to the trash is not enough to delete it. Privoxy supplies an uninstall.command file that takes care of
-          these details. Open the trash, drag the uninstall.command file out of the trash and
-          double-click on it. You will be prompted for confirmation and the
-          administration password.
-        
-        
-          The trash may still appear full after this command; emptying the
-          trash from the desktop should make it appear empty again.
-        
-      
-      
-        
-          5.9. In Mac OS X Panther (10.3), images
-          often fail to load and/or I experience random delays in page
-          loading. I'm using localhost as my
-          browser's proxy setting.
-        
-        
-          We believe this is due to an IPv6-related bug in Mac OS X, but
-          don't fully understand the issue yet. In any case, changing the
-          proxy setting to 127.0.0.1 instead of localhost works around the problem.
-        
-      
-      
-        
-          5.10. I get a completely blank page at one
-          site. "View Source" shows only: <html><body></body></html>.
-          Without Privoxy the page loads fine.
-        
-        
-          Chances are that the site suffers from a bug in PHP, which results in empty pages being
-          sent if the client explicitly requests an uncompressed page, like
-          Privoxy does. This bug has been
-          fixed in PHP 4.2.3.
-        
-        
-          To find out if this is in fact the source of the problem, try
-          adding the site to a -prevent-compression
-          section in user.action:
-        
-        
-          
-            
+        
+      
-+          
+
+      Despite 12 out of 32 requests being blocked, the page looked, and
+      seemed to behave perfectly "normal" (minus
+      some ads, of course).
+    
+
+    
+      5.4. One of my
+      favorite sites does not work with Privoxy. What can I do?
+
+      First verify that it is indeed a Privoxy problem, by toggling off Privoxy through http://config.privoxy.org/toggle (the toggle feature may
+      need to be enabled in the main config), and
+      then shift-reloading the problem page (i.e. holding down the shift key
+      while clicking reload. Alternatively, flush your browser's disk and
+      memory caches).
+
+      If the problem went away, we know we have a configuration related
+      problem. Now go to http://config.privoxy.org/show-url-info and paste the
+      full URL of the page in question into the prompt. See which actions are
+      being applied to the URL, and which matches in which actions files are
+      responsible for that. It might be helpful also to look at your logs for
+      this site too, to see what else might be happening (note: logging may
+      need to be enabled in the main config file). Many sites are complex and
+      require a number of related pages to help present their content. Look
+      at what else might be used by the page in question, and what of that
+      might be required. Now, armed
+      with this information, go to http://config.privoxy.org/show-status and select the
+      appropriate actions files for editing.
+
+      You can now either look for a section which disables the actions
+      that you suspect to cause the problem and add a pattern for your site
+      there, or make up a completely new section for your site. In any case,
+      the recommended way is to disable only the prime suspect, reload the
+      problem page, and only if the problem persists, disable more and more
+      actions until you have identified the culprit. You may or may not want
+      to turn the other actions on again. Remember to flush your browser's
+      caches in between any such changes!
+
+      Alternately, if you are comfortable with a text editor, you can
+      accomplish the same thing by editing the appropriate actions file.
+      Probably the easiest way to deal with such problems when editing by
+      hand is to add your site to a { fragile }
+      section in user.action, which is an alias
+      that turns off most "dangerous" actions, but
+      is also likely to turn off more actions then needed, and thus lower
+      your privacy and protection more than necessary,
+
+      Troubleshooting actions is discussed in more detail in the User Manual
+      appendix, Troubleshooting: the Anatomy of an Action. There is also
+      an actions tutorial with general configuration information and
+      examples.
+
+      As a last resort, you can always see if your browser has a setting
+      that will bypass the proxy setting for selective sites. Modern browsers
+      can do this.
+    
+
+    
+      5.5. After installing Privoxy,
+      I have to log in every time I start IE. What gives?
+
+      This is a quirk that effects the installation of Privoxy, in conjunction with Internet Explorer and
+      Internet Connection Sharing on Windows 2000 and Windows XP. The
+      symptoms may appear to be corrupted or invalid DUN settings, or
+      passwords.
+
+      When setting up an NT based Windows system with Privoxy you may find that things do not seem to be
+      doing what you expect. When you set your system up you will probably
+      have set up Internet Connection Sharing (ICS) with Dial up Networking
+      (DUN) when logged in with administrator privileges. You will probably
+      have made this DUN connection available to other accounts that you may
+      have set-up on your system. E.g. Mum or Dad sets up the system and
+      makes accounts suitably configured for the kids.
+
+      When setting up Privoxy in this
+      environment you will have to alter the proxy set-up of Internet
+      Explorer (IE) for the specific DUN connection on which you wish to use
+      Privoxy. When you do this the ICS DUN
+      set-up becomes user specific. In this instance you will see no
+      difference if you change the DUN connection under the account used to
+      set-up the connection. However when you do this from another user you
+      will notice that the DUN connection changes to make available to "Me
+      only". You will also find that you have to store the password under
+      each different user!
+
+      The reason for this is that each user's set-up for IE is user
+      specific. Each set-up DUN connection and each LAN connection in IE
+      store the settings for each user individually. As such this enforces
+      individual configurations rather than common ones. Hence the first time
+      you use a DUN connection after re-booting your system it may not
+      perform as you expect, and prompt you for the password. Just set and
+      save the password again and all should be OK.
+
+      [Thanks to Ray Griffith for this submission.]
+    
+
+    
+      5.6. I cannot connect to any
+      FTP sites. Privoxy is blocking me.
+
+      Privoxy cannot act as a proxy for
+      FTP traffic, so do not configure your browser to use Privoxy as an FTP proxy. The same is true for
+      any protocol other than HTTP or
+      HTTPS (SSL).
+
+      Most browsers understand FTP as well as HTTP. If you connect to a
+      site, with a URL like ftp://ftp.example.com,
+      your browser is making an FTP connection, and not a HTTP connection. So
+      while your browser may speak FTP, Privoxy does not, and cannot proxy such
+      traffic.
+
+      To complicate matters, some systems may have a generic "proxy" setting, which will enable various protocols,
+      including both HTTP and FTP
+      proxying! So it is possible to accidentally enable FTP proxying in
+      these cases. And of course, if this happens, Privoxy will indeed cause problems since it does
+      not know FTP. Newer version will give a sane error message if a FTP
+      connection is attempted. Just disable the FTP setting and all will be
+      well again.
+
+      Will Privoxy ever proxy FTP
+      traffic? Unlikely. There just is not much reason, and the work to make
+      this happen is more than it may seem.
+    
+
+    
+      5.7. In Mac OS X, I
+      can't configure Microsoft Internet Explorer to use Privoxy as the HTTP
+      proxy.
+
+      Microsoft Internet Explorer (in versions like 5.1) respects
+      system-wide network settings. In order to change the HTTP proxy, open
+      System Preferences, and click on the Network icon. In the settings pane
+      that comes up, click on the Proxies tab. Ensure the "Web Proxy (HTTP)"
+      checkbox is checked and enter 127.0.0.1 in the
+      entry field. Enter 8118 in the Port field. The
+      next time you start IE, it should reflect these values.
+    
+
+    
+      5.8.
+      In Mac OS X, I dragged the Privoxy folder to the trash in order to
+      uninstall it. Now the finder tells me I don't have sufficient
+      privileges to empty the trash.
+
+      Note: This ONLY applies to privoxy 3.0.6 and earlier.
+
+      Just dragging the Privoxy folder to
+      the trash is not enough to delete it. Privoxy supplies an uninstall.command file that takes care of these
+      details. Open the trash, drag the uninstall.command file out of the trash and
+      double-click on it. You will be prompted for confirmation and the
+      administration password.
+
+      The trash may still appear full after this command; emptying the
+      trash from the desktop should make it appear empty again.
+    
+
+    
+      5.9. In Mac
+      OS X Panther (10.3), images often fail to load and/or I experience
+      random delays in page loading. I'm using localhost as my browser's proxy setting.
+
+      We believe this is due to an IPv6-related bug in Mac OS X, but don't
+      fully understand the issue yet. In any case, changing the proxy setting
+      to 127.0.0.1 instead of localhost works around the problem.
+    
+
+    
+      5.10. I get a
+      completely blank page at one site. "View
+      Source" shows only: <html><body></body></html>.
+      Without Privoxy the page loads fine.
+
+      Chances are that the site suffers from a bug in PHP, which results in empty pages being sent
+      if the client explicitly requests an uncompressed page, like
+      Privoxy does. This bug has been fixed
+      in PHP 4.2.3.
+
+      To find out if this is in fact the source of the problem, try adding
+      the site to a -prevent-compression section in
+      user.action:
+
+      
+        
+          
-          
-        
+                # Make exceptions for ill-behaved sites:
    #
    {-prevent-compression}
     .example.com
 
-            
-        
-          If that works, you may also want to report the problem to the
-          site's webmasters, telling them to use zlib.output_compression
-          instead of ob_gzhandler in their PHP applications (workaround) or
-          upgrade to PHP 4.2.3 or later (fix).
-        
-      
-      
-        
-          5.11. My logs show many "Unable to get my own hostname" lines. Why?
-        
-        
-          Privoxy tries to get the hostname
-          of the system its running on from the IP address of the system
-          interface it is bound to (from the config
-          file listen-address setting). If the system cannot
-          supply this information, Privoxy
-          logs this condition.
-        
-        
-          Typically, this would be considered a minor system configuration
-          error. It is not a fatal error to Privoxy however, but may result in a much
-          slower response from Privoxy on
-          some platforms due to DNS timeouts.
-        
-        
-          This can be caused by a problem with the local hosts file. If this file has been changed from the
-          original, try reverting it to see if that helps. Make sure whatever
-          name(s) are used for the local system, that they resolve both ways.
-        
-        
-          You should also be able to work around the problem with the hostname
-          option.
-        
-      
-      
-        
-          5.12. When I try to launch Privoxy, I get an error
-          message "port 8118 is already in use"
-          (or similar wording). Why?
-        
-        
-          Port 8118 is Privoxy's default TCP
-          "listening" port. Typically this message
-          would mean that there is already one instance of Privoxy running, and your system is actually
-          trying to start a second Privoxy
-          on the same port, which will not work. (You can have multiple
-          instances but they must be assigned different ports.) How and why
-          this might happen varies from platform to platform, but you need to
-          check your installation and start-up procedures.
-        
-      
-      
-        
-          5.13. Pages with UTF-8 fonts are garbled.
-        
-        
-          This is caused by the "demoronizer"
-          filter. You should either upgrade Privoxy, or at least upgrade to the most
-          recent default.action file available from
-          SourceForge. Or you can simply disable the
-          demoronizer filter.
-        
-      
-      
-        
-          5.14. Why are binary files (such as images)
-          corrupted when Privoxy is used?
-        
-        
-          This may also be caused by the "demoronizer" filter, in conjunction with a web
-          server that is misreporting the content type. Binary files are
-          exempted from Privoxy's filtering
-          (unless the web server by mistake says the file is something else).
-          Either upgrade Privoxy, or go to
-          the most recent default.action file
-          available from SourceForge.
-        
-      
-      
-        
-          5.15. What is the "demoronizer" and why is it there?
-        
-        
-          The original demoronizer was a Perl script that cleaned up HTML
-          pages which were created with certain Microsoft products. MS has
-          used proprietary extensions to standardized font encodings (ISO
-          8859-1), which has caused problems for pages that are viewed with
-          non-Microsoft products (and are expecting to see a standard set of
-          fonts). The demoronizer corrected these errors so the pages
-          displayed correctly. Privoxy
-          borrowed from this script, introducing a filter based on the
-          original demoronizer, which in turn could correct these errors on
-          the fly.
-        
-        
-          But this is only needed in some situations, and will cause serious
-          problems in some other situations.
-        
-        
-          If you are using Microsoft products, you do not need it. If you
-          need to view pages with UTF-8 characters (such as Cyrillic or
-          Chinese), then it will cause corruption of the fonts, and thus
-          should not be
-          on.
-        
-        
-          On the other hand, if you use non-Microsoft products, and you
-          occasionally notice weird characters on pages, you might want to
-          try it.
-        
-      
-      
-        
-          5.16. Why do I keep seeing "PrivoxyWindowOpen()" in raw source code?
-        
-        
-          Privoxy is attempting to disable
-          malicious Javascript in this case, with the unsolicited-popups filter. Privoxy cannot tell very well "good" code snippets from "bad" code snippets.
-        
-        
-          If you see this in HTML source, and the page displays without
-          problems, then this is good, and likely some pop-up window was
-          disabled. If you see this where it is causing a problem, such as a
-          downloaded program source code file, then you should set an
-          exception for this site or page such that the integrity of the page
-          stays in tact by disabling all filtering.
-        
-      
-      
-        
-          5.17. I am getting too many DNS errors like
-          "404 No Such Domain". Why can't Privoxy
-          do this better?
-        
-        
-          There are potentially several factors here. First of all, the DNS
-          resolution is done by the underlying operating system -- not Privoxy itself. Privoxy merely initiates the process and hands
-          it off, and then later reports whatever the outcome was and tries
-          to give a coherent message if there seems to be a problem. In some
-          cases, this might otherwise be mitigated by the browser itself
-          which might try some work-arounds and alternate approaches (e.g
-          adding "www." to the URL).
-        
-        
-          In other cases, if Privoxy is
-          being chained with another proxy, this could complicate the issue,
-          and cause undue delays and timeouts. In the case of a "socks4a" proxy, the socks server handles all the
-          DNS. Privoxy would just be the
-          "messenger" which is reporting whatever
-          problem occurred downstream, and not the root cause of the error.
-        
-        
-          In any case, versions newer than 3.0.3 include various improvements
-          to help Privoxy better handle
-          these cases.
-        
-      
-      
-        
-          5.18. At one site Privoxy just hangs, and starts
-          taking all CPU. Why is this?
-        
-        
-          This is probably a manifestation of the "100%
-          cpu" problem that occurs on pages containing many (thousands
-          upon thousands) of blank lines. The blank lines are in the raw HTML
-          source of the page, and the browser just ignores them. But the
-          pattern matching in Privoxy's page
-          filtering mechanism is trying to match against absurdly long
-          strings and this becomes very CPU-intensive, taking a long, long
-          time to complete.
-        
-        
-          Until a better solution comes along, disable filtering on these
-          pages, particularly the js-annoyances and
-          unsolicited-popups filters. If you run
-          into this problem with a recent Privoxy version, please send a problem report.
-        
-      
-      
-        
-          5.19. I just installed Privoxy, and all my
-          browsing has slowed to a crawl. What gives?
-        
-        
-          This should not happen, and for the overwhelming number of users
-          world-wide, it does not happen. I would suspect some inadvertent
-          interaction of software components such as anti-virus software,
-          spyware protectors, personal firewalls or similar components. Try
-          disabling (or uninstalling) these one at a time and see if that
-          helps. Either way, if you are using a recent Privoxy version, please report the problem.
-        
-      
-      
-        
-          5.20. Why do my filters work on some sites
-          but not on others?
-        
-        
-          It's probably due to compression. It is a common practice for web
-          servers to send their content "compressed" in order to speed things up, and then
-          let the browser "uncompress" them. When
-          compiled with zlib support Privoxy
-          can decompress content before filtering, otherwise you may want to
-          enable prevent-compression.
-        
-        
-          As of Privoxy 3.0.9, zlib support
-          is enabled in the default builds.
-        
-      
-      
-        
-          5.21. On some HTTPS sites my browser warns
-          me about unauthenticated content, the URL bar doesn't get
-          highlighted and the lock symbol appears to be broken. What's going
-          on?
-        
-        
-          Probably the browser is requesting ads through HTTPS and Privoxy is blocking the requests.
-          Privoxy's error messages are delivered unencrypted and while it's
-          obvious for the browser that the HTTPS request is already blocked
-          by the proxy, some warn about unauthenticated content anyway.
-        
-        
-          To work around the problem you can redirect those requests to an
-          invalid local address instead of blocking them. While the redirects
-          aren't encrypted either, many browsers don't care. They simply
-          follow the redirect, fail to reach a server and display an error
-          message instead of the ad.
-        
-        
-          To do that, enable logging to figure out which requests get blocked
-          by Privoxy and add the hosts (no
-          path patterns) to a section like this:
-        
-        
-          
-            
-          
-        
--{+redirect{http://127.0.0.1:0/} -block -limit-connect}
-.ivwbox.de:443/
-
-            
-
-        
-          Additionally you have to configure your browser to contact "127.0.0.1:0" directly (instead of through
-          Privoxy).
-        
-        
-          To add a proxy exception in Mozilla
-          Firefox open the "Preferences",
-          click the "Settings" button located on
-          the "Network" tab in the "Advanced" section, and add "127.0.0.1:0" in the "No Proxy
-          for:" field.
-        
-      
-      
-        
-          5.22. I get selinux error messages. How can I
-          fix this?
-        
-        
-          Please report the problem to the creator of your selinux policies.
-        
-        
-          The problem is that some selinux policy writers aren't familiar
-          with the application they are trying to "secure" and thus create policies that make no
-          sense.
-        
-        
-          In Privoxy's case the problem
-          usually is that the policy only allows outgoing connections for
-          certain destination ports (e.g. 80 and 443). While this may cover
-          the standard ports, websites occasionally use other ports as well.
-          This isn't a security problem and therefore Privoxy's default configuration doesn't block
-          these requests.
-        
-        
-          If you really want to block these ports (and don't be able to load
-          websites that don't use standard ports), you should configure
-          Privoxy to block these ports as well, so it doesn't trigger the
-          selinux warnings.
-        
-      
-      
-        
-          5.23. I compiled Privoxy with Gentoo's portage and it appears
-          to be very slow. Why?
-        
-        
-          Probably you unintentionally compiled Privoxy without threading support in which
-          case requests have to be serialized and only one can be served at
-          the same time.
-        
-        
-          Check your "USE" flags and make sure
-          they include "threads". If they don't,
-          add the flag and rebuild Privoxy.
-        
-        
-          If you compiled Privoxy with
-          threading support (on POSIX-based systems), the "Conditional #defines" section on http://config.privoxy.org/show-status will list "FEATURE_PTHREAD" as "enabled".
-        
-      
-    
-    
-      
-      
-        
-          
-          
-          
+      
-            Prev
-          
-            Home
-          
-            Next
           
         
+
+      If that works, you may also want to report the problem to the site's
+      webmasters, telling them to use zlib.output_compression instead of
+      ob_gzhandler in their PHP applications (workaround) or upgrade to PHP
+      4.2.3 or later (fix).
+    
+
+    
+      5.11. My logs
+      show many "Unable to get my own hostname"
+      lines. Why?
+
+      Privoxy tries to get the hostname
+      of the system its running on from the IP address of the system
+      interface it is bound to (from the config
+      file listen-address setting).
+      If the system cannot supply this information, Privoxy logs this condition.
+
+      Typically, this would be considered a minor system configuration
+      error. It is not a fatal error to Privoxy however, but may result in a much slower
+      response from Privoxy on some
+      platforms due to DNS timeouts.
+
+      This can be caused by a problem with the local hosts file. If this file has been changed from the
+      original, try reverting it to see if that helps. Make sure whatever
+      name(s) are used for the local system, that they resolve both ways.
+
+      You should also be able to work around the problem with the hostname
+      option.
+    
+
+    
+      5.12. When I try to launch
+      Privoxy, I get an error message "port 8118 is
+      already in use" (or similar wording). Why?
+
+      Port 8118 is Privoxy's default TCP
+      "listening" port. Typically this message
+      would mean that there is already one instance of Privoxy running, and your system is actually
+      trying to start a second Privoxy on
+      the same port, which will not work. (You can have multiple instances
+      but they must be assigned different ports.) How and why this might
+      happen varies from platform to platform, but you need to check your
+      installation and start-up procedures.
+    
+
+    
+      5.13. Pages
+      with UTF-8 fonts are garbled.
+
+      This is caused by the "demoronizer"
+      filter. You should either upgrade Privoxy, or at least upgrade to the most recent
+      default.action file available from SourceForge. Or you can simply disable the demoronizer
+      filter.
+    
+
+    
+      5.14. Why
+      are binary files (such as images) corrupted when Privoxy is
+      used?
+
+      This may also be caused by the "demoronizer" filter, in conjunction with a web server
+      that is misreporting the content type. Binary files are exempted from
+      Privoxy's filtering (unless the web
+      server by mistake says the file is something else). Either upgrade
+      Privoxy, or go to the most recent
+      default.action file available from SourceForge.
+    
+
+    
+      5.15. What
+      is the "demoronizer" and why is it
+      there?
+
+      The original demoronizer was a Perl script that cleaned up HTML
+      pages which were created with certain Microsoft products. MS has used
+      proprietary extensions to standardized font encodings (ISO 8859-1),
+      which has caused problems for pages that are viewed with non-Microsoft
+      products (and are expecting to see a standard set of fonts). The
+      demoronizer corrected these errors so the pages displayed correctly.
+      Privoxy borrowed from this script,
+      introducing a filter based on the original demoronizer, which in turn
+      could correct these errors on the fly.
+
+      But this is only needed in some situations, and will cause serious
+      problems in some other situations.
+
+      If you are using Microsoft products, you do not need it. If you need
+      to view pages with UTF-8 characters (such as Cyrillic or Chinese), then
+      it will cause corruption of the fonts, and thus should not be on.
+
+      On the other hand, if you use non-Microsoft products, and you
+      occasionally notice weird characters on pages, you might want to try
+      it.
+    
+
+    
+      5.16. Why do I
+      keep seeing "PrivoxyWindowOpen()" in raw
+      source code?
+
+      Privoxy is attempting to disable
+      malicious Javascript in this case, with the unsolicited-popups filter. Privoxy cannot tell very well "good" code snippets from "bad" code snippets.
+
+      If you see this in HTML source, and the page displays without
+      problems, then this is good, and likely some pop-up window was
+      disabled. If you see this where it is causing a problem, such as a
+      downloaded program source code file, then you should set an exception
+      for this site or page such that the integrity of the page stays in tact
+      by disabling all filtering.
+    
+
+    
+      5.17. I am getting
+      too many DNS errors like "404 No Such
+      Domain". Why can't Privoxy do this better?
+
+      There are potentially several factors here. First of all, the DNS
+      resolution is done by the underlying operating system -- not
+      Privoxy itself. Privoxy merely initiates the process and hands it
+      off, and then later reports whatever the outcome was and tries to give
+      a coherent message if there seems to be a problem. In some cases, this
+      might otherwise be mitigated by the browser itself which might try some
+      work-arounds and alternate approaches (e.g adding "www." to the URL).
+
+      In other cases, if Privoxy is being
+      chained with another proxy, this could complicate the issue, and cause
+      undue delays and timeouts. In the case of a "socks4a" proxy, the socks server handles all the DNS.
+      Privoxy would just be the "messenger" which is reporting whatever problem occurred
+      downstream, and not the root cause of the error.
+
+      In any case, versions newer than 3.0.3 include various improvements
+      to help Privoxy better handle these
+      cases.
+    
+
+    
+      5.18. At one site
+      Privoxy just hangs, and starts taking all CPU. Why is this?
+
+      This is probably a manifestation of the "100%
+      cpu" problem that occurs on pages containing many (thousands
+      upon thousands) of blank lines. The blank lines are in the raw HTML
+      source of the page, and the browser just ignores them. But the pattern
+      matching in Privoxy's page filtering
+      mechanism is trying to match against absurdly long strings and this
+      becomes very CPU-intensive, taking a long, long time to complete.
+
+      Until a better solution comes along, disable filtering on these
+      pages, particularly the js-annoyances and
+      unsolicited-popups filters. If you run into
+      this problem with a recent Privoxy
+      version, please send a problem report.
+    
+
+    
+      5.19. I just
+      installed Privoxy, and all my browsing has slowed to a crawl. What
+      gives?
+
+      This should not happen, and for the overwhelming number of users
+      world-wide, it does not happen. I would suspect some inadvertent
+      interaction of software components such as anti-virus software, spyware
+      protectors, personal firewalls or similar components. Try disabling (or
+      uninstalling) these one at a time and see if that helps. Either way, if
+      you are using a recent Privoxy
+      version, please report the problem.
+    
+
+    
+      5.20. Why do
+      my filters work on some sites but not on others?
+
+      It's probably due to compression. It is a common practice for web
+      servers to send their content "compressed"
+      in order to speed things up, and then let the browser "uncompress" them. When compiled with zlib support
+      Privoxy can decompress content before
+      filtering, otherwise you may want to enable prevent-compression.
+
+      As of Privoxy 3.0.9, zlib support
+      is enabled in the default builds.
+    
+
+    
+      5.21. On
+      some HTTPS sites my browser warns me about unauthenticated content, the
+      URL bar doesn't get highlighted and the lock symbol appears to be
+      broken. What's going on?
+
+      Probably the browser is requesting ads through HTTPS and
+      Privoxy is blocking the requests.
+      Privoxy's error messages are delivered unencrypted and while it's
+      obvious for the browser that the HTTPS request is already blocked by
+      the proxy, some warn about unauthenticated content anyway.
+
+      To work around the problem you can redirect those requests to an
+      invalid local address instead of blocking them. While the redirects
+      aren't encrypted either, many browsers don't care. They simply follow
+      the redirect, fail to reach a server and display an error message
+      instead of the ad.
+
+      To do that, enable logging to figure out which requests get blocked
+      by Privoxy and add the hosts (no path
+      patterns) to a section like this:
+
+      
-          
-          
-          
         
-            Miscellaneous
-          
-             
-          
-            Contacting the developers, Bug Reporting and Feature Requests
+          
+            +{+redirect{http://127.0.0.1:0/} -block -limit-connect}
+.ivwbox.de:443/
+
           
         
       
+
+      Additionally you have to configure your browser to contact
+      "127.0.0.1:0" directly (instead of through
+      Privoxy).
+
+      To add a proxy exception in Mozilla
+      Firefox open the "Preferences", click
+      the "Settings" button located on the
+      "Network" tab in the "Advanced" section, and add "127.0.0.1:0" in the "No Proxy
+      for:" field.
     
-  
-
 
+    
+      5.22. I get selinux
+      error messages. How can I fix this?
+
+      Please report the problem to the creator of your selinux
+      policies.
+
+      The problem is that some selinux policy writers aren't familiar with
+      the application they are trying to "secure"
+      and thus create policies that make no sense.
+
+      In Privoxy's case the problem
+      usually is that the policy only allows outgoing connections for certain
+      destination ports (e.g. 80 and 443). While this may cover the standard
+      ports, websites occasionally use other ports as well. This isn't a
+      security problem and therefore Privoxy's default configuration doesn't block
+      these requests.
+
+      If you really want to block these ports (and don't be able to load
+      websites that don't use standard ports), you should configure Privoxy
+      to block these ports as well, so it doesn't trigger the selinux
+      warnings.
+    
+
+    
+      5.23. I
+      compiled Privoxy with Gentoo's portage
+      and it appears to be very slow. Why?
+
+      Probably you unintentionally compiled Privoxy without threading support in which case
+      requests have to be serialized and only one can be served at the same
+      time.
+
+      Check your "USE" flags and make sure they
+      include "threads". If they don't, add the
+      flag and rebuild Privoxy.
+
+      If you compiled Privoxy with
+      threading support (on POSIX-based systems), the "Conditional #defines" section on http://config.privoxy.org/show-status will list "FEATURE_PTHREAD" as "enabled".
+    
+  
+
+  
+    
+
+    
+      
+        
+
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Miscellaneous   Contacting the developers,
+        Bug Reporting and Feature Requests
+  
+
+
diff --git a/doc/webserver/index.html b/doc/webserver/index.html
index 4920dc4e..c3fbe90c 100644
--- a/doc/webserver/index.html
+++ b/doc/webserver/index.html
@@ -1,234 +1,207 @@
-
+
+
 
-  
-    
-    
-      Privoxy - Home Page
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          Privoxy - Home Page
-        
-        
-          
-          
-            Privoxy is a non-caching web proxy with advanced filtering
-            capabilities for enhancing privacy, modifying web page data and
-            HTTP headers, controlling access, and removing ads and other
-            obnoxious Internet junk. Privoxy has a flexible configuration and
-            can be customized to suit individual needs and tastes. It has
-            application for both stand-alone systems and multi-user networks.
-          
-          
-            Privoxy is Free Software and licensed under the GNU GPLv2.
-          
-          
-            Privoxy is an associated project of Software in the Public
-            Interest (SPI).
-          
-          
-            Helping hands and donations are welcome:
-          
-          
-            
-              
-                http://www.privoxy.org/faq/general.html#PARTICIPATE
-              
-            
-            
-              
-                http://www.privoxy.org/faq/general.html#DONATE
-              
-            
-          
-
-          
-            The most recent release is 3.0.18 (UNRELEASED).
-          
-        
-        
-      
-      
-        
-          Download
-        
-        
-        
-        
-          
-            
-              Download recent releases
-            
-          
-          
-            
-              Quickstart
-              after installation
-            
-          
-        
-      
-      
-        
-        
-          Documentation
-        
-        
-        
-        
-          
-            
-              User manual
-            
-          
-          
-            
-              Frequently Asked
-              Questions
-            
-          
-          
-            
-              Developer
-              Manual
-            
-          
-          
-            
-              Classic
-              Man Page
-            
-          
-        
-      
-      
-        
-        
-          More information
-        
-        
-        
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  col.c1 {text-align: center}
+  
+
+
+
+  
+    
+      Privoxy - Home Page
+
+      
+        
+
+        Privoxy is a non-caching web proxy with advanced filtering
+        capabilities for enhancing privacy, modifying web page data and HTTP
+        headers, controlling access, and removing ads and other obnoxious
+        Internet junk. Privoxy has a flexible configuration and can be
+        customized to suit individual needs and tastes. It has application
+        for both stand-alone systems and multi-user networks.
+
+        Privoxy is Free Software and licensed under the GNU GPLv2.
+
+        Privoxy is an associated project of Software in the Public
+        Interest (SPI).
+
+        Helping hands and donations are welcome:
+
         
           
-            
-              Support &
-              Service
-            
-          
-          
-            
-              Copyright,
-              License, History & Authors
-            
-          
-          
-            
-              List of (new) Features
-            
-          
-          
-            
-              The project page
-            
-          
-          
-            
-              Related
-              links
-            
+            http://www.privoxy.org/faq/general.html#PARTICIPATE
           
+
           
-            
-              Pictures of the Privoxy Team
-            
+            http://www.privoxy.org/faq/general.html#DONATE
           
         
+
+        The most recent release is 3.0.18 (stable).
       
-      
-        
-        
-          
-        
-        
-          
-          
-            -            
-              
-                
-              
-              
-                
-              
-            
-          

-                  Privoxy is developed on:
-                

-                  
-                  
-                
-        
-
-        
-          _{Copyright © 2001-2010 by Privoxy Developers}
-        
+      
+    
+
+    
+      Download
+
+      
+        
+          Download recent releases
+        
+
+        
+          Quickstart
+          after installation
+        
+      
+    
+
+    
+      
+
+      Documentation
+
+      
+        
+          User
+          manual
+        
+
+        
+          Frequently Asked
+          Questions
+        
+
+        
+          Developer
+          Manual
+        
+
+        
+          Classic
+          Man Page
+        
+      
+    
+
+    
+      
+
+      More
+      information
+
+      
+        
+          Support &
+          Service
+        
+
+        
+          Copyright,
+          License, History & Authors
+        
+
+        
+          List of (new) Features
+        
+
+        
+          The project page
+        
+
+        
+          Related
+          links
+        
+
+        
+          Pictures of the Privoxy Team
+        
+      
+    
+
+    
+      
+
+      
+
+      
+        
+
+        
+          +
+          
+            
+              
+            
+
+            
+              
+            
+          
+        
Privoxy is developed on:

       
+
+      _{Copyright © 2001-2010 by Privoxy Developers}
     
-  
+  
+
 
-
diff --git a/doc/webserver/man-page/privoxy-man-page.html b/doc/webserver/man-page/privoxy-man-page.html
index 1bb72e28..e9e78852 100644
--- a/doc/webserver/man-page/privoxy-man-page.html
+++ b/doc/webserver/man-page/privoxy-man-page.html
@@ -1,24 +1,23 @@
-
+
+
 
-  
-    
-    
-      Privoxy Man page
-    
-    
-  
-  
-    
-      NAME
-    
-+
+  
+
+  Privoxy Man page
+  
+
+
+
+  NAME
+   
 
 
-    
-      SYNOPSIS
-    
-+
+  SYNOPSIS
+          privoxy   [--help   ]  [--version   ]  [--no-daemon  ] [--pidfile pidfile ]
        [--user user[.group] ] [--chroot    ]  [--pre-chroot-nslookup  hostname  ]
        [configfile ]
@@ -26,10 +25,9 @@
 
 
 
-    
-      OPTIONS
-    
-+
+  OPTIONS
+          Privoxy may be invoked with the following command line options:
 
        --help Print brief usage  info and exit.
@@ -72,10 +70,9 @@
 
 
 
-    
-      DESCRIPTION
-    
-+
+  DESCRIPTION
+          Privoxy is a non-caching web proxy with advanced filtering capabilities
        for enhancing privacy, modifying web page data and HTTP  headers,  con-
        trolling  access,  and  removing ads and other obnoxious Internet junk.
@@ -83,10 +80,9 @@
 
 
 
-    
-      INSTALLATION AND USAGE
-    
-+
+  INSTALLATION AND USAGE
+          Browsers can either be individually configured to use Privoxy as  a HTTP
        proxy (recommended), or Privoxy can be combined with a packet filter to
        build  an intercepting proxy (see config).  The default setting is  for
@@ -107,10 +103,9 @@
 
 
 
-    
-      CONFIGURATION
-    
-+
+  CONFIGURATION
+          Privoxy   can  be  configured  with the various configuration files. The
        default configuration files are: config,  default.filter,  default.action
        and  default.action.  user.action  should  be  used for locally defined
@@ -138,10 +133,9 @@
 
 
 
-    
-      FILES
-    
-+
+  FILES
+       /usr/sbin/privoxy
     /etc/privoxy/config
     /etc/privoxy/match-all.action
@@ -152,10 +146,9 @@
 
 
 
-    
-      NOTES
-    
-+
+  NOTES
+          This  is  a  UNRELEASED  version  of Privoxy. Not all features are well
        tested.
 
@@ -164,10 +157,9 @@
 
 
 
-    
-      SEE ALSO
-    
-+
+  SEE ALSO
+          Other references and sites of interest to Privoxy users:
 
 
@@ -189,10 +181,9 @@
 
 
 
-    
-      DEVELOPMENT TEAM
-    
-+
+  DEVELOPMENT TEAM
+       Fabian Keil, lead developer
     David Schmidt, developer
 
@@ -204,10 +195,9 @@
 
 
 
-    
-      COPYRIGHT AND LICENSE
-    
-+
+  COPYRIGHT AND LICENSE
+      COPYRIGHT
        Copyright  (C)  2001-2011  by   Privoxy   Developers   <ijbswa-develop-
        ers@lists.sourceforge.net>
@@ -221,6 +211,5 @@
        under the terms of the GNU General Public License, version 2,  as  pub-
        lished by the Free Software Foundation.
 
-  
+
 
-
diff --git a/doc/webserver/privoxy-index.html b/doc/webserver/privoxy-index.html
index 83d05985..01511ec0 100644
--- a/doc/webserver/privoxy-index.html
+++ b/doc/webserver/privoxy-index.html
@@ -1,209 +1,185 @@
-
+
+
 
-  
-    
-    
-      Privoxy - The Privacy Enhancing Proxy
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          Privoxy - The Privacy Enhancing Proxy
-        
-        
-          Project Index Page v3.0.18
-        
-        
-          
-          
-            Privoxy is a non-caching web proxy with advanced filtering
-            capabilities for enhancing privacy, modifying web page data and
-            HTTP headers, controlling access, and removing ads and other
-            obnoxious Internet junk. Privoxy has a flexible configuration and
-            can be customized to suit individual needs and tastes. It has
-            application for both stand-alone systems and multi-user networks.
-          
-          
-            Privoxy is Free Software and licensed under the GNU GPLv2.
-          
-          
-            Privoxy is an associated project of Software in the Public
-            Interest (SPI).
-          
-          
-            Helping hands and donations are welcome:
-          
-          
-            
-              
-                http://www.privoxy.org/faq/general.html#PARTICIPATE
-              
-            
-            
-              
-                http://www.privoxy.org/faq/general.html#DONATE
-              
-            
-          
-        
-        
-      
-      
-        
-          Download
-        
-        
-        
-        
-          
-            
-              Download recent releases
-            
-          
-          
-            
-              Quickstart
-              after installation
-            
-          
-        
-      
-      
-        
-        
-          Documentation
-        
-        
-        
-        
-          
-            
-              User manual
-            
-          
-          
-            
-              Frequently Asked
-              Questions
-            
-          
-          
-            
-              Developer
-              Manual
-            
-          
-          
-            
-              Classic
-              Man Page
-            
-          
-        
-      
-      
-        
-        
-          More information
-        
-        
-        
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  
+
+
+
+  
+    
+      Privoxy - The Privacy
+      Enhancing Proxy
+
+      Project Index Page v3.0.18
+
+      
+        
+
+        Privoxy is a non-caching web proxy with advanced filtering
+        capabilities for enhancing privacy, modifying web page data and HTTP
+        headers, controlling access, and removing ads and other obnoxious
+        Internet junk. Privoxy has a flexible configuration and can be
+        customized to suit individual needs and tastes. It has application
+        for both stand-alone systems and multi-user networks.
+
+        Privoxy is Free Software and licensed under the GNU GPLv2.
+
+        Privoxy is an associated project of Software in the Public
+        Interest (SPI).
+
+        Helping hands and donations are welcome:
+
         
           
-            
-              Support &
-              Service
-            
-          
-          
-            
-              Copyright,
-              License, History & Authors
-            
-          
-          
-            
-              List of (new) Features
-            
-          
-          
-            
-              The project page
-            
-          
-          
-            
-              Related
-              links
-            
+            http://www.privoxy.org/faq/general.html#PARTICIPATE
           
+
           
-            
-              Pictures of the Privoxy Team
-            
+            http://www.privoxy.org/faq/general.html#DONATE
           
         
       
-      
-        
-        
-          
-        
-        
-          _{Copyright © 2001-2010 by Privoxy Developers}
-        
-      
+      
     
-  
-
 
+    
+      Download
+
+      
+        
+          Download recent releases
+        
+
+        
+          Quickstart
+          after installation
+        
+      
+    
+
+    
+      
+
+      Documentation
+
+      
+        
+          User
+          manual
+        
+
+        
+          Frequently Asked
+          Questions
+        
+
+        
+          Developer
+          Manual
+        
+
+        
+          Classic
+          Man Page
+        
+      
+    
+
+    
+      
+
+      More
+      information
+
+      
+        
+          Support &
+          Service
+        
+
+        
+          Copyright,
+          License, History & Authors
+        
+
+        
+          List of (new) Features
+        
+
+        
+          The project page
+        
+
+        
+          Related
+          links
+        
+
+        
+          Pictures of the Privoxy Team
+        
+      
+    
+
+    
+      
+
+      
+
+      _{Copyright © 2001-2010 by Privoxy Developers}
+    
+  
+
+
diff --git a/doc/webserver/team/index.html b/doc/webserver/team/index.html
index 0d093d1a..168c9637 100644
--- a/doc/webserver/team/index.html
+++ b/doc/webserver/team/index.html
@@ -1,62 +1,52 @@
-
+
+
 
-  
-    
-    
-    
-      Privoxy - Team Photos
-    
-    
-
-  
-  
-    
-      Privoxy - Team Photos
-    
-    
-    
-      In our day jobs, we're all models ;-)
-    
-    
-      
-        
-        
-        
-        
-      
-      
-        
-        
-        
-        
-      
-    
-          
-        
-          
-        
-          
-        
-          
-        

-          
-        
-          
-        
-          
-        
-          
-        
-  
-
+
+  
+  
+
+  Privoxy - Team Photos
+  
+  
+
+
+
+  Privoxy - Team Photos
+  
+
+  In our day jobs, we're all models ;-)
+
+  
+    
+      
+
+      
 
+      
+
+      
+    
+
+    
+      
+
+      
+
+      
+
+      
+    
+  

+
+
diff --git a/doc/webserver/user-manual/actions-file.html b/doc/webserver/user-manual/actions-file.html
index cbffcee7..f8885724 100644
--- a/doc/webserver/user-manual/actions-file.html
+++ b/doc/webserver/user-manual/actions-file.html
@@ -1,504 +1,417 @@
-
+
+
 
-  
-    
-    
-      Actions Files
-    
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
-        
-          
-          
-          
-        
-      
-            Privoxy 3.0.18 User Manual
-          

-            Prev
-          
-          
-            Next
-          
-      
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  td.c6 {font-weight: bold}
+  tt.c5 {font-style: italic}
+  table.c4 {background-color: #E0E0E0}
+  p.c3 {font-weight: bold}
+  span.c2 {font-style: italic}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy 3.0.18 User Manual
Prev Next
+    
+  
+
+  
+    8. Actions
+    Files
+
+    The actions files are used to define what actions Privoxy takes for which URLs, and thus determines
+    how ad images, cookies and various other aspects of HTTP content and
+    transactions are handled, and on which sites (or even parts thereof).
+    There are a number of such actions, with a wide range of functionality.
+    Each action does something a little different. These actions give us a
+    veritable arsenal of tools with which to exert our control, preferences
+    and independence. Actions can be combined so that their effects are
+    aggregated when applied against a given set of URLs.
+
+    There are three action files included with Privoxy with differing purposes:
+
+    
+      
+        match-all.action - is used to define
+        which "actions" relating to
+        banner-blocking, images, pop-ups, content modification, cookie
+        handling etc should be applied by default. It should be the first
+        actions file loaded
+      
+
+      
+        default.action - defines many exceptions
+        (both positive and negative) from the default set of actions that's
+        configured in match-all.action. It is a set
+        of rules that should work reasonably well as-is for most users. This
+        file is only supposed to be edited by the developers. It should be
+        the second actions file loaded.
+      
+
+      
+        user.action - is intended to be for
+        local site preferences and exceptions. As an example, if your ISP or
+        your bank has specific requirements, and need special handling, this
+        kind of thing should go here. This file will not be upgraded.
+      
+
+      
+        Edit Set to
+        Cautious Set to Medium
+        Set to Advanced
+
+        These have increasing levels of aggressiveness and have no influence on your browsing unless
+        you select them explicitly in the editor. A default
+        installation should be pre-set to Cautious.
+        New users should try this for a while before adjusting the settings
+        to more aggressive levels. The more aggressive the settings, then the
+        more likelihood there is of problems such as sites not working as
+        they should.
+
+        The Edit button allows you to turn
+        each action on/off individually for fine-tuning. The Cautious button changes the actions list to
+        low/safe settings which will activate ad blocking and a minimal set
+        of Privoxy's features, and
+        subsequently there will be less of a chance for accidental problems.
+        The Medium button sets the list to a
+        medium level of other features and a low level set of privacy
+        features. The Advanced button sets the
+        list to a high level of ad blocking and medium level of privacy. See
+        the chart below. The latter three buttons over-ride any changes via
+        with the Edit button. More fine-tuning
+        can be done in the lower sections of this internal page.
+
+        While the actions file editor allows to enable these settings in
+        all actions files, they are only supposed to be enabled in the first
+        one to make sure you don't unintentionally overrule earlier
+        rules.
+
+        The default profiles, and their associated actions, as pre-defined
+        in default.action are:
+
+        
+          
+
+          Table 1. Default Configurations
+
+          
+            +            +            +            +
+            
+              
+                
+
+                
+
+                
+
+                
+              
+            
+
+            
+              
+                
+
+                
+
+                
+
+                
+              
+
+              
+                
+
+                
+
+                
+
+                
+              
+
+              
+                
+
+                
+
+                
+
+                
+              
+
+              
+                
+
+                
+
+                
+
+                
+              
+
+              
+                
+
+                
+
+                
+
+                
+              
+
+              
+                
+
+                
+
+                
+
+                
+              
+
+              
+                
+
+                
+
+                
+
+                
+              
+
+              
+                
+
+                
+
+                
+
+                
+              
+
+              
+                
+
+                
+
+                
+
+                
+              
+
+              
+                
+
+                
+
+                
+
+                
+              
+
+              
+                
+
+                
+
+                
+
+                
+              
+
+              
+                
+
+                
+
+                
+
+                
+              
+
+              
+                
+
+                
+
+                
+
+                
+              
+            
+          



Feature Cautious Medium Advanced
Ad-blocking Aggressiveness medium high high
Ad-filtering by size no yes yes
Ad-filtering by link no no yes
Pop-up killing blocks only blocks only blocks only
Privacy Features low medium medium/high
Cookie handling none session-only kill
Referer forging no yes yes
GIF de-animation no yes yes
Fast redirects no no yes
HTML taming no no yes
JavaScript taming no no yes
Web-bug killing no yes yes
Image tag reordering no yes yes
+        
+      
+    
+
+    The list of actions files to be used are defined in the main
+    configuration file, and are processed in the order they are defined (e.g.
+    default.action is typically processed before
+    user.action). The content of these can all be
+    viewed and edited from http://config.privoxy.org/show-status. The over-riding
+    principle when applying actions, is that the last action that matches a
+    given URL wins. The broadest, most general rules go first (defined in
+    default.action), followed by any exceptions
+    (typically also in default.action), which are
+    then followed lastly by any local preferences (typically in user.action).
+    Generally, user.action has the last word.
+
+    An actions file typically has multiple sections. If you want to use
+    "aliases" in an actions file, you have to
+    place the (optional) alias
+    section at the top of that file. Then comes the default set of rules
+    which will apply universally to all sites and pages (be very careful with using such a universal
+    set in user.action or any other actions file
+    after default.action, because it will override
+    the result from consulting any previous file). And then below that,
+    exceptions to the defined universal policies. You can regard user.action as an appendix to default.action, with the advantage that it is a separate
+    file, which makes preserving your personal settings across Privoxy upgrades easier.
+
+    Actions can be used to block anything you want, including ads,
+    banners, or just some obnoxious URL whose content you would rather not
+    see. Cookies can be accepted or rejected, or accepted only during the
+    current browser session (i.e. not written to disk), content can be
+    modified, some JavaScripts tamed, user-tracking fooled, and much more.
+    See below for a complete list of
+    actions.
+
+    
+      8.1. Finding the Right
+      Mix
+
+      Note that some actions, like
+      cookie suppression or script disabling, may render some sites unusable
+      that rely on these techniques to work properly. Finding the right mix
+      of actions is not always easy and certainly a matter of personal taste.
+      And, things can always change, requiring refinements in the
+      configuration. In general, it can be said that the more "aggressive" your default settings (in the top section
+      of the actions file) are, the more exceptions for "trusted" sites you will have to make later. If, for
+      example, you want to crunch all cookies per default, you'll have to
+      make exceptions from that rule for sites that you regularly use and
+      that require cookies for actually useful purposes, like maybe your
+      bank, favorite shop, or newspaper.
+
+      We have tried to provide you with reasonable rules to start from in
+      the distribution actions files. But there is no general rule of thumb
+      on these things. There just are too many variables, and sites are
+      constantly changing. Sooner or later you will want to change the rules
+      (and read this chapter again :).
     
-    
-      
-        8. Actions Files
-      
-      
-        The actions files are used to define what actions Privoxy takes for which URLs, and thus
-        determines how ad images, cookies and various other aspects of HTTP
-        content and transactions are handled, and on which sites (or even
-        parts thereof). There are a number of such actions, with a wide range
-        of functionality. Each action does something a little different.
-        These actions give us a veritable arsenal of tools with which to
-        exert our control, preferences and independence. Actions can be
-        combined so that their effects are aggregated when applied against a
-        given set of URLs.
-      
-      
-        There are three action files included with Privoxy with differing purposes:
-      
-      
-      
-      
-        
-          
-            match-all.action - is used to define
-            which "actions" relating to
-            banner-blocking, images, pop-ups, content modification, cookie
-            handling etc should be applied by default. It should be the first
-            actions file loaded
-          
-        
-        
-          
-            default.action - defines many
-            exceptions (both positive and negative) from the default set of
-            actions that's configured in match-all.action. It is a set of rules that
-            should work reasonably well as-is for most users. This file is
-            only supposed to be edited by the developers. It should be the
-            second actions file loaded.
-          
-        
-        
-          
-            user.action - is intended to be for
-            local site preferences and exceptions. As an example, if your ISP
-            or your bank has specific requirements, and need special
-            handling, this kind of thing should go here. This file will not
-            be upgraded.
-          
-        
-        
-          
-            Edit Set
-            to Cautious Set to Medium
-            Set to Advanced
-          
-          
-            These have increasing levels of aggressiveness and have no influence on your
-            browsing unless you select them explicitly in the
-            editor. A default installation should be pre-set to
-            Cautious. New users should try this for
-            a while before adjusting the settings to more aggressive levels.
-            The more aggressive the settings, then the more likelihood there
-            is of problems such as sites not working as they should.
-          
-          
-            The Edit button allows you to turn
-            each action on/off individually for fine-tuning. The Cautious button changes the actions list to
-            low/safe settings which will activate ad blocking and a minimal
-            set of Privoxy's features, and
-            subsequently there will be less of a chance for accidental
-            problems. The Medium button sets
-            the list to a medium level of other features and a low level set
-            of privacy features. The Advanced
-            button sets the list to a high level of ad blocking and medium
-            level of privacy. See the chart below. The latter three buttons
-            over-ride any changes via with the Edit button. More fine-tuning can be done in
-            the lower sections of this internal page.
-          
-          
-            While the actions file editor allows to enable these settings in
-            all actions files, they are only supposed to be enabled in the
-            first one to make sure you don't unintentionally overrule earlier
-            rules.
-          
-          
-            The default profiles, and their associated actions, as
-            pre-defined in default.action are:
-          
-          
-          
-          
-            
-            
-              Table 1. Default Configurations
-            
-            
-              -              -              -              -              
-                
-                  
-                  
-                  
-                  
-                
-              
-              
-                
-                  
-                  
-                  
-                  
-                
-                
-                  
-                  
-                  
-                  
-                
-                
-                  
-                  
-                  
-                  
-                
-                
-                  
-                  
-                  
-                  
-                
-                
-                  
-                  
-                  
-                  
-                
-                
-                  
-                  
-                  
-                  
-                
-                
-                  
-                  
-                  
-                  
-                
-                
-                  
-                  
-                  
-                  
-                
-                
-                  
-                  
-                  
-                  
-                
-                
-                  
-                  
-                  
-                  
-                
-                
-                  
-                  
-                  
-                  
-                
-                
-                  
-                  
-                  
-                  
-                
-                
-                  
-                  
-                  
-                  
-                
-              
-            




-                    Feature
-                  
-                    Cautious
-                  
-                    Medium
-                  
-                    Advanced
-                  

-                    Ad-blocking Aggressiveness
-                  
-                    medium
-                  
-                    high
-                  
-                    high
-                  

-                    Ad-filtering by size
-                  
-                    no
-                  
-                    yes
-                  
-                    yes
-                  

-                    Ad-filtering by link
-                  
-                    no
-                  
-                    no
-                  
-                    yes
-                  

-                    Pop-up killing
-                  
-                    blocks only
-                  
-                    blocks only
-                  
-                    blocks only
-                  

-                    Privacy Features
-                  
-                    low
-                  
-                    medium
-                  
-                    medium/high
-                  

-                    Cookie handling
-                  
-                    none
-                  
-                    session-only
-                  
-                    kill
-                  

-                    Referer forging
-                  
-                    no
-                  
-                    yes
-                  
-                    yes
-                  

-                    GIF de-animation
-                  
-                    no
-                  
-                    yes
-                  
-                    yes
-                  

-                    Fast redirects
-                  
-                    no
-                  
-                    no
-                  
-                    yes
-                  

-                    HTML taming
-                  
-                    no
-                  
-                    no
-                  
-                    yes
-                  

-                    JavaScript taming
-                  
-                    no
-                  
-                    no
-                  
-                    yes
-                  

-                    Web-bug killing
-                  
-                    no
-                  
-                    yes
-                  
-                    yes
-                  

-                    Image tag reordering
-                  
-                    no
-                  
-                    yes
-                  
-                    yes
-                  
-          
-        
-      
 
-      
-        The list of actions files to be used are defined in the main
-        configuration file, and are processed in the order they are defined
-        (e.g. default.action is typically processed
-        before user.action). The content of these
-        can all be viewed and edited from http://config.privoxy.org/show-status. The over-riding
-        principle when applying actions, is that the last action that matches
-        a given URL wins. The broadest, most general rules go first (defined
-        in default.action), followed by any
-        exceptions (typically also in default.action), which are then followed lastly by
-        any local preferences (typically in user.action).
-        Generally, user.action has the last word.
-      
-      
-        An actions file typically has multiple sections. If you want to use
-        "aliases" in an actions file, you have to
-        place the (optional) alias
-        section at the top of that file. Then comes the default set of
-        rules which will apply universally to all sites and pages (be very careful with
-        using such a universal set in user.action
-        or any other actions file after default.action, because it will override the result
-        from consulting any previous file). And then below that, exceptions
-        to the defined universal policies. You can regard user.action as an appendix to default.action, with the advantage that it is a
-        separate file, which makes preserving your personal settings across
-        Privoxy upgrades easier.
-      
-      
-        Actions can be used to block anything you want, including ads,
-        banners, or just some obnoxious URL whose content you would rather
-        not see. Cookies can be accepted or rejected, or accepted only during
-        the current browser session (i.e. not written to disk), content can
-        be modified, some JavaScripts tamed, user-tracking fooled, and much
-        more. See below for a complete
-        list of actions.
-      
-      
-        
-          8.1. Finding the Right Mix
-        
-        
-          Note that some actions,
-          like cookie suppression or script disabling, may render some sites
-          unusable that rely on these techniques to work properly. Finding
-          the right mix of actions is not always easy and certainly a matter
-          of personal taste. And, things can always change, requiring
-          refinements in the configuration. In general, it can be said that
-          the more "aggressive" your default
-          settings (in the top section of the actions file) are, the more
-          exceptions for "trusted" sites you will
-          have to make later. If, for example, you want to crunch all cookies
-          per default, you'll have to make exceptions from that rule for
-          sites that you regularly use and that require cookies for actually
-          useful purposes, like maybe your bank, favorite shop, or newspaper.
-        
-        
-          We have tried to provide you with reasonable rules to start from in
-          the distribution actions files. But there is no general rule of
-          thumb on these things. There just are too many variables, and sites
-          are constantly changing. Sooner or later you will want to change
-          the rules (and read this chapter again :).
-        
-      
-      
-        
-          8.2. How to Edit
-        
-        
-          The easiest way to edit the actions files is with a browser by
-          using our browser-based editor, which can be reached from http://config.privoxy.org/show-status. Note: the config
-          file option enable-edit-actions must be
-          enabled for this to work. The editor allows both fine-grained
-          control over every single feature on a per-URL basis, and easy
-          choosing from wholesale sets of defaults like "Cautious", "Medium" or
-          "Advanced". Warning: the "Advanced" setting is more aggressive, and will be
-          more likely to cause problems for some sites. Experienced users
-          only!
-        
-        
-          If you prefer plain text editing to GUIs, you can of course also
-          directly edit the the actions files with your favorite text editor.
-          Look at default.action which is richly
-          commented with many good examples.
-        
-      
-      
-        
-          8.3. How Actions are Applied to
-          Requests
-        
-        
-          Actions files are divided into sections. There are special
-          sections, like the "alias" sections which will
-          be discussed later. For now let's concentrate on regular sections:
-          They have a heading line (often split up to multiple lines for
-          readability) which consist of a list of actions, separated by
-          whitespace and enclosed in curly braces. Below that, there is a
-          list of URL and tag patterns, each on a separate line.
-        
-        
-          To determine which actions apply to a request, the URL of the
-          request is compared to all URL patterns in each "action file". Every time it matches, the list of
-          applicable actions for the request is incrementally updated, using
-          the heading of the section in which the pattern is located. The
-          same is done again for tags and tag patterns later on.
-        
-        
-          If multiple applying sections set the same action differently, the
-          last match wins. If not, the effects are aggregated. E.g. a URL
-          might match a regular section with a heading line of { +handle-as-image },
-          then later another one with just { +block }, resulting in both actions to
-          apply. And there may well be cases where you will want to combine
-          actions together. Such a section then might look like:
-        
-        
-        
-        
-          
-            
+        
+      
-+    
+      8.2. How to
+      Edit
+
+      The easiest way to edit the actions files is with a browser by using
+      our browser-based editor, which can be reached from http://config.privoxy.org/show-status. Note: the config file
+      option enable-edit-actions must be
+      enabled for this to work. The editor allows both fine-grained control
+      over every single feature on a per-URL basis, and easy choosing from
+      wholesale sets of defaults like "Cautious",
+      "Medium" or "Advanced". Warning: the "Advanced" setting is more aggressive, and will be more
+      likely to cause problems for some sites. Experienced users only!
+
+      If you prefer plain text editing to GUIs, you can of course also
+      directly edit the the actions files with your favorite text editor.
+      Look at default.action which is richly
+      commented with many good examples.
+    
+
+    
+      8.3. How
+      Actions are Applied to Requests
+
+      Actions files are divided into sections. There are special sections,
+      like the "alias" sections which will be
+      discussed later. For now let's concentrate on regular sections: They
+      have a heading line (often split up to multiple lines for readability)
+      which consist of a list of actions, separated by whitespace and
+      enclosed in curly braces. Below that, there is a list of URL and tag
+      patterns, each on a separate line.
+
+      To determine which actions apply to a request, the URL of the
+      request is compared to all URL patterns in each "action file". Every time it matches, the list of
+      applicable actions for the request is incrementally updated, using the
+      heading of the section in which the pattern is located. The same is
+      done again for tags and tag patterns later on.
+
+      If multiple applying sections set the same action differently, the
+      last match wins. If not, the effects are aggregated. E.g. a URL might
+      match a regular section with a heading line of {
+      +handle-as-image
+      }, then later another one with just {
+      +block }, resulting in
+      both actions to apply. And
+      there may well be cases where you will want to combine actions
+      together. Such a section then might look like:
+
+      
+        
+          
-          
-        
+               { +handle-as-image  +block{Banner ads.} }
   # Block these as if they were images. Send no block page.
@@ -506,786 +419,663 @@ Transitional//EN""http://www.w3.org/TR/html4/loose.dtd">
    media.example.com/.*banners
    .example.com/images/ads/
 
-            
+          
+
+      You can trace this process for URL patterns and any given URL by
+      visiting http://config.privoxy.org/show-url-info.
+
+      Examples and more detail on this is provided in the Appendix,
+      Troubleshooting: Anatomy of an
+      Action section.
+    
+
+    
+      8.4.
+      Patterns
+
+      As mentioned, Privoxy uses
+      "patterns" to determine what actions might apply to which sites and
+      pages your browser attempts to access. These "patterns" use wild card type pattern matching to achieve a high degree
+      of flexibility. This allows one expression to be expanded and
+      potentially match against many similar patterns.
+
+      Generally, an URL pattern has the form <domain><port>/<path>, where the
+      <domain>, the <port> and the <path> are optional. (This is why the special
+      / pattern matches all URLs). Note that the
+      protocol portion of the URL pattern (e.g. http://) should not be included in the pattern. This is
+      assumed already!
+
+      The pattern matching syntax is different for the domain and path
+      parts of the URL. The domain part uses a simple globbing type matching
+      technique, while the path part uses more flexible "Regular Expressions" (POSIX
+      1003.2).
 
-        
-          You can trace this process for URL patterns and any given URL by
-          visiting http://config.privoxy.org/show-url-info.
-        
-        
-          Examples and more detail on this is provided in the Appendix, Troubleshooting: Anatomy of an
-          Action section.
-        
+      The port part of a pattern is a decimal port number preceded by a
+      colon (:). If the domain part contains a
+      numerical IPv6 address, it has to be put into angle brackets
+      (<, >).
+
+      
+        
+          www.example.com/
+
+          
+            is a domain-only pattern and will match any request to
+            www.example.com, regardless of which
+            document on that server is requested. So ALL pages in this domain
+            would be covered by the scope of this action. Note that a simple
+            example.com is different and would NOT
+            match.
+          
+
+          www.example.com
+
+          
+            means exactly the same. For domain-only patterns, the trailing
+            / may be omitted.
+          
+
+          www.example.com/index.html
+
+          
+            matches all the documents on www.example.com whose name starts with /index.html.
+          
+
+          www.example.com/index.html$
+
+          
+            matches only the single document /index.html on www.example.com.
+          
+
+          /index.html$
+
+          
+            matches the document /index.html,
+            regardless of the domain, i.e. on any web server anywhere.
+          
+
+          /
+
+          
+            Matches any URL because there's no requirement for either the
+            domain or the path to match anything.
+          
+
+          :8000/
+
+          
+            Matches any URL pointing to TCP port 8000.
+          
+
+          <2001:db8::1>/
+
+          
+            Matches any URL with the host address 2001:db8::1. (Note that the real URL uses plain
+            brackets, not angle brackets.)
+          
+
+          index.html
+
+          
+            matches nothing, since it would be interpreted as a domain
+            name and there is no top-level domain called .html. So its a mistake.
+          
+        
       
-      
-        
-          8.4. Patterns
-        
-        
-          As mentioned, Privoxy uses "patterns" to determine what actions might apply to
-          which sites and pages your browser attempts to access. These "patterns" use wild card type pattern matching to
-          achieve a high degree of flexibility. This allows one expression to
-          be expanded and potentially match against many similar patterns.
-        
-        
-          Generally, an URL pattern has the form <domain><port>/<path>, where the
-          <domain>, the <port> and the <path> are optional. (This is why the special
-          / pattern matches all URLs). Note that the
-          protocol portion of the URL pattern (e.g. http://) should not be included in the pattern. This is
-          assumed already!
-        
-        
-          The pattern matching syntax is different for the domain and path
-          parts of the URL. The domain part uses a simple globbing type
-          matching technique, while the path part uses more flexible "Regular Expressions" (POSIX
-          1003.2).
-        
-        
-          The port part of a pattern is a decimal port number preceded by a
-          colon (:). If the domain part contains a
-          numerical IPv6 address, it has to be put into angle brackets (<, >).
-        
+
+      
+        8.4.1. The Domain
+        Pattern
+
+        The matching of the domain part offers some flexible options: if
+        the domain starts or ends with a dot, it becomes unanchored at that
+        end. For example:
+
         
           
-            
-              www.example.com/
-            
-            
-              
-                is a domain-only pattern and will match any request to www.example.com, regardless of which
-                document on that server is requested. So ALL pages in this
-                domain would be covered by the scope of this action. Note
-                that a simple example.com is
-                different and would NOT match.
-              
-            
-            
-              www.example.com
-            
-            
-              
-                means exactly the same. For domain-only patterns, the
-                trailing / may be omitted.
-              
-            
-            
-              www.example.com/index.html
-            
-            
-              
-                matches all the documents on www.example.com whose name starts with /index.html.
-              
-            
-            
-              www.example.com/index.html$
-            
-            
-              
-                matches only the single document /index.html on www.example.com.
-              
-            
-            
-              /index.html$
-            
-            
-              
-                matches the document /index.html,
-                regardless of the domain, i.e. on any web server anywhere.
-              
-            
-            
-              /
-            
-            
-              
-                Matches any URL because there's no requirement for either the
-                domain or the path to match anything.
-              
-            
-            
-              :8000/
-            
-            
-              
-                Matches any URL pointing to TCP port 8000.
-              
-            
-            
-              <2001:db8::1>/
-            
-            
-              
-                Matches any URL with the host address 2001:db8::1. (Note that the real URL uses
-                plain brackets, not angle brackets.)
-              
-            
-            
-              index.html
-            
-            
-              
-                matches nothing, since it would be interpreted as a domain
-                name and there is no top-level domain called .html. So its a mistake.
-              
+            
.example.com
+
+            
+              matches any domain with first-level domain com and second-level domain example. For example www.example.com, example.com and foo.bar.baz.example.com. Note that it wouldn't
+              match if the second-level domain was another-example.
+            
+
+            www.
+
+            
+              matches any domain that STARTS with www. (It also matches the domain www but most of the time that doesn't
+              matter.)
+            
+
+            .example.
+
+            
+              matches any domain that CONTAINS .example.. And, by the way, also included would
+              be any files or documents that exist within that domain since
+              no path limitations are specified. (Correctly speaking: It
+              matches any FQDN that contains example
+              as a domain.) This might be www.example.com, news.example.de, or www.example.net/cgi/testing.pl for instance. All
+              these cases are matched.
             
           
         
-        
-          
-            8.4.1. The Domain Pattern
-          
-          
-            The matching of the domain part offers some flexible options: if
-            the domain starts or ends with a dot, it becomes unanchored at
-            that end. For example:
-          
-          
-            
-              
-                .example.com
-              
-              
-                
-                  matches any domain with first-level domain com and second-level domain example. For example www.example.com, example.com and foo.bar.baz.example.com. Note that it
-                  wouldn't match if the second-level domain was another-example.
-                
-              
-              
-                www.
-              
-              
-                
-                  matches any domain that STARTS with www. (It also matches the domain www but most of the time that doesn't
-                  matter.)
-                
-              
-              
-                .example.
-              
-              
-                
-                  matches any domain that CONTAINS .example.. And, by the way, also included
-                  would be any files or documents that exist within that
-                  domain since no path limitations are specified. (Correctly
-                  speaking: It matches any FQDN that contains example as a domain.) This might be www.example.com, news.example.de, or www.example.net/cgi/testing.pl for instance.
-                  All these cases are matched.
-                
-              
-            
-          
-          
-            Additionally, there are wild-cards that you can use in the domain
-            names themselves. These work similarly to shell globbing type
-            wild-cards: "*" represents zero or
-            more arbitrary characters (this is equivalent to the "Regular Expression" based
-            syntax of ".*"), "?" represents any single character (this is
-            equivalent to the regular expression syntax of a simple "."), and you can define "character classes" in square brackets which is
-            similar to the same regular expression technique. All of this can
-            be freely mixed:
-          
-          
-            
-              
-                ad*.example.com
-              
-              
-                
-                  matches "adserver.example.com",
-                  "ads.example.com", etc but not
-                  "sfads.example.com"
-                
-              
-              
-                *ad*.example.com
-              
-              
-                
-                  matches all of the above, and then some.
-                
-              
-              
-                .?pix.com
-              
-              
-                
-                  matches www.ipix.com, pictures.epix.com, a.b.c.d.e.upix.com etc.
-                
-              
-              
-                www[1-9a-ez].example.c*
-              
-              
-                
-                  matches www1.example.com, www4.example.cc, wwwd.example.cy, wwwz.example.com etc., but not wwww.example.com.
-                
-              
-            
-          
-          
-            While flexible, this is not the sophistication of full regular
-            expression based syntax.
-          
-        
-        
-          
-            8.4.2. The Path Pattern
-          
-          
-            Privoxy uses "modern" POSIX 1003.2 "Regular Expressions" for
-            matching the path portion (after the slash), and is thus more
-            flexible.
-          
-          
-            There is an Appendix with a
-            brief quick-start into regular expressions, you also might want
-            to have a look at your operating system's documentation on
-            regular expressions (try man re_format).
-          
-          
-            Note that the path pattern is automatically left-anchored at the
-            "/", i.e. it matches as if it would
-            start with a "^" (regular expression
-            speak for the beginning of a line).
-          
-          
-            Please also note that matching in the path is CASE INSENSITIVE by
-            default, but you can switch to case sensitive at any point in the
-            pattern by using the "(?-i)" switch:
-            www.example.com/(?-i)PaTtErN.* will
-            match only documents whose path starts with PaTtErN in exactly this capitalization.
-          
-          
-            
-              
-                .example.com/.*
-              
-              
-                
-                  Is equivalent to just ".example.com", since any documents within
-                  that domain are matched with or without the ".*" regular expression. This is redundant
-                
-              
-              
-                .example.com/.*/index.html$
-              
-              
-                
-                  Will match any page in the domain of "example.com" that is named "index.html", and that is part of some path.
-                  For example, it matches "www.example.com/testing/index.html" but NOT
-                  "www.example.com/index.html"
-                  because the regular expression called for at least two
-                  "/'s", thus the path
-                  requirement. It also would match "www.example.com/testing/index_html",
-                  because of the special meta-character ".".
-                
-              
-              
-                .example.com/(.*/)?index\.html$
-              
-              
-                
-                  This regular expression is conditional so it will match any
-                  page named "index.html"
-                  regardless of path which in this case can have one or more
-                  "/'s". And this one must contain
-                  exactly ".html" (but does not
-                  have to end with that!).
-                
-              
-              
-                .example.com/(.*/)(ads|banners?|junk)
-              
-              
-                
-                  This regular expression will match any path of "example.com" that contains any of the words
-                  "ads", "banner", "banners" (because of the "?") or "junk".
-                  The path does not have to end in these words, just contain
-                  them.
-                
-              
-              
-                .example.com/(.*/)(ads|banners?|junk)/.*\.(jpe?g|gif|png)$
-              
-              
-                
-                  This is very much the same as above, except now it must end
-                  in either ".jpg", ".jpeg", ".gif"
-                  or ".png". So this one is
-                  limited to common image formats.
-                
-              
-            
-          
-          
-            There are many, many good examples to be found in default.action, and more tutorials below in Appendix on regular expressions.
-          
+
+        Additionally, there are wild-cards that you can use in the domain
+        names themselves. These work similarly to shell globbing type
+        wild-cards: "*" represents zero or more
+        arbitrary characters (this is equivalent to the "Regular Expression" based
+        syntax of ".*"), "?" represents any single character (this is
+        equivalent to the regular expression syntax of a simple "."), and you can define "character classes" in square brackets which is
+        similar to the same regular expression technique. All of this can be
+        freely mixed:
+
+        
+          
+            ad*.example.com
+
+            
+              matches "adserver.example.com",
+              "ads.example.com", etc but not
+              "sfads.example.com"
+            
+
+            *ad*.example.com
+
+            
+              matches all of the above, and then some.
+            
+
+            .?pix.com
+
+            
+              matches www.ipix.com, pictures.epix.com, a.b.c.d.e.upix.com etc.
+            
+
+            www[1-9a-ez].example.c*
+
+            
+              matches www1.example.com,
+              www4.example.cc, wwwd.example.cy, wwwz.example.com etc., but not wwww.example.com.
+            
+          
         
-        
-          
-            8.4.3. The Tag Pattern
-          
-          
-            Tag patterns are used to change the applying actions based on the
-            request's tags. Tags can be created with either the client-header-tagger
-            or the server-header-tagger
-            action.
-          
-          
-            Tag patterns have to start with "TAG:", so Privoxy can tell them apart from URL
-            patterns. Everything after the colon including white space, is
-            interpreted as a regular expression with path pattern syntax,
-            except that tag patterns aren't left-anchored automatically
-            (Privoxy doesn't silently add a
-            "^", you have to do it yourself if you
-            need it).
-          
-          
-            To match all requests that are tagged with "foo" your pattern line should be "TAG:^foo$", "TAG:foo"
-            would work as well, but it would also match requests whose tags
-            contain "foo" somewhere. "TAG: foo" wouldn't work as it requires white
-            space.
-          
-          
-            Sections can contain URL and tag patterns at the same time, but
-            tag patterns are checked after the URL patterns and thus always
-            overrule them, even if they are located before the URL patterns.
-          
-          
-            Once a new tag is added, Privoxy checks right away if it's
-            matched by one of the tag patterns and updates the action
-            settings accordingly. As a result tags can be used to activate
-            other tagger actions, as long as these other taggers look for
-            headers that haven't already be parsed.
-          
-          
-            For example you could tag client requests which use the POST method, then use this tag to activate
-            another tagger that adds a tag if cookies are sent, and then use
-            a block action based on the cookie tag. This allows the outcome
-            of one action, to be input into a subsequent action. However if
-            you'd reverse the position of the described taggers, and
-            activated the method tagger based on the cookie tagger, no method
-            tags would be created. The method tagger would look for the
-            request line, but at the time the cookie tag is created, the
-            request line has already been parsed.
-          
-          
-            While this is a limitation you should be aware of, this kind of
-            indirection is seldom needed anyway and even the example doesn't
-            make too much sense.
-          
+
+        While flexible, this is not the sophistication of full regular
+        expression based syntax.
+      
+
+      
+        8.4.2. The Path
+        Pattern
+
+        Privoxy uses "modern" POSIX 1003.2 "Regular Expressions" for
+        matching the path portion (after the slash), and is thus more
+        flexible.
+
+        There is an Appendix with a
+        brief quick-start into regular expressions, you also might want to
+        have a look at your operating system's documentation on regular
+        expressions (try man re_format).
+
+        Note that the path pattern is automatically left-anchored at the
+        "/", i.e. it matches as if it would start
+        with a "^" (regular expression speak for
+        the beginning of a line).
+
+        Please also note that matching in the path is CASE INSENSITIVE by default, but you
+        can switch to case sensitive at any point in the pattern by using the
+        "(?-i)" switch: www.example.com/(?-i)PaTtErN.* will match only
+        documents whose path starts with PaTtErN in
+        exactly this
+        capitalization.
+
+        
+          
+            .example.com/.*
+
+            
+              Is equivalent to just ".example.com", since any documents within that
+              domain are matched with or without the ".*" regular expression. This is redundant
+            
+
+            .example.com/.*/index.html$
+
+            
+              Will match any page in the domain of "example.com" that is named "index.html", and that is part of some path. For
+              example, it matches "www.example.com/testing/index.html" but NOT
+              "www.example.com/index.html" because
+              the regular expression called for at least two "/'s", thus the path requirement. It also would
+              match "www.example.com/testing/index_html", because of
+              the special meta-character ".".
+            
+
+            .example.com/(.*/)?index\.html$
+
+            
+              This regular expression is conditional so it will match any
+              page named "index.html" regardless
+              of path which in this case can have one or more "/'s". And this one must contain exactly
+              ".html" (but does not have to end
+              with that!).
+            
+
+            .example.com/(.*/)(ads|banners?|junk)
+
+            
+              This regular expression will match any path of "example.com" that contains any of the words
+              "ads", "banner", "banners"
+              (because of the "?") or "junk". The path does not have to end in these
+              words, just contain them.
+            
+
+            .example.com/(.*/)(ads|banners?|junk)/.*\.(jpe?g|gif|png)$
+
+            
+              This is very much the same as above, except now it must end
+              in either ".jpg", ".jpeg", ".gif" or
+              ".png". So this one is limited to
+              common image formats.
+            
+          
         
+
+        There are many, many good examples to be found in default.action, and more tutorials below in Appendix on regular expressions.
       
-      
-        
-          8.5. Actions
-        
-        
-          All actions are disabled by default, until they are explicitly
-          enabled somewhere in an actions file. Actions are turned on if
-          preceded with a "+", and turned off if
-          preceded with a "-". So a +action means "do that
-          action", e.g. +block means "please block URLs that match the following
-          patterns", and -block means "don't block URLs that match the following patterns,
-          even if +block previously
-          applied."
-        
-        
-          Again, actions are invoked by placing them on a line, enclosed in
-          curly braces and separated by whitespace, like in {+some-action -some-other-action{some-parameter}},
-          followed by a list of URL patterns, one per line, to which they
-          apply. Together, the actions line and the following pattern lines
-          make up a section of the actions file.
-        
-        
-          Actions fall into three categories:
-        
-        
-        
-        
-          
-            
-              Boolean, i.e the action can only be "enabled" or "disabled". Syntax:
-            
-            
-            
-            
-              
-                
+                
+              
--  +name        # enable action name
-  -name        # disable action name
+
+      
+        8.4.3. The
+        Tag Pattern
+
+        Tag patterns are used to change the applying actions based on the
+        request's tags. Tags can be created with either the client-header-tagger or
+        the server-header-tagger
+        action.
+
+        Tag patterns have to start with "TAG:",
+        so Privoxy can tell them apart from
+        URL patterns. Everything after the colon including white space, is
+        interpreted as a regular expression with path pattern syntax, except
+        that tag patterns aren't left-anchored automatically (Privoxy doesn't silently add a "^", you have to do it yourself if you need it).
+
+        To match all requests that are tagged with "foo" your pattern line should be "TAG:^foo$", "TAG:foo"
+        would work as well, but it would also match requests whose tags
+        contain "foo" somewhere. "TAG: foo" wouldn't work as it requires white
+        space.
+
+        Sections can contain URL and tag patterns at the same time, but
+        tag patterns are checked after the URL patterns and thus always
+        overrule them, even if they are located before the URL patterns.
+
+        Once a new tag is added, Privoxy checks right away if it's matched
+        by one of the tag patterns and updates the action settings
+        accordingly. As a result tags can be used to activate other tagger
+        actions, as long as these other taggers look for headers that haven't
+        already be parsed.
+
+        For example you could tag client requests which use the POST method, then use this tag to activate another
+        tagger that adds a tag if cookies are sent, and then use a block
+        action based on the cookie tag. This allows the outcome of one
+        action, to be input into a subsequent action. However if you'd
+        reverse the position of the described taggers, and activated the
+        method tagger based on the cookie tagger, no method tags would be
+        created. The method tagger would look for the request line, but at
+        the time the cookie tag is created, the request line has already been
+        parsed.
+
+        While this is a limitation you should be aware of, this kind of
+        indirection is seldom needed anyway and even the example doesn't make
+        too much sense.
+      
+    
+
+    
+      8.5. Actions
+
+      All actions are disabled by default, until they are explicitly
+      enabled somewhere in an actions file. Actions are turned on if preceded
+      with a "+", and turned off if preceded with
+      a "-". So a +action
+      means "do that action", e.g. +block means "please block URLs that
+      match the following patterns", and -block means "don't block URLs that
+      match the following patterns, even if +block
+      previously applied."
+
+      Again, actions are invoked by placing them on a line, enclosed in
+      curly braces and separated by whitespace, like in {+some-action -some-other-action{some-parameter}},
+      followed by a list of URL patterns, one per line, to which they apply.
+      Together, the actions line and the following pattern lines make up a
+      section of the actions file.
+
+      Actions fall into three categories:
+
+      
+        
+          Boolean, i.e the action can only be "enabled" or "disabled".
+          Syntax:
+
+          
+            
+              
-              
-            
+                +  +name        # enable action name
+  -name        # disable action name
 
-                
-
-            
-              Example: +handle-as-image
-            
-          
-          
-            
-              Parameterized, where some value is required in order to enable
-              this type of action. Syntax:
-            
-            
-            
-            
-              
-                
+            
+          
--  +name{param}  # enable action and set parameter to param,
+              
+
+          Example: +handle-as-image
+        
+
+        
+          Parameterized, where some value is required in order to enable
+          this type of action. Syntax:
+
+          
+            
+              
-              
-            
+                +  +name{param}  # enable action and set parameter to param,
                # overwriting parameter from previous match if necessary
   -name         # disable action. The parameter can be omitted
+"REPLACEABLE c5">name         # disable action. The parameter can be omitted
 
-                
-
-            
-              Note that if the URL matches multiple positive forms of a
-              parameterized action, the last match wins, i.e. the params from
-              earlier matches are simply ignored.
-            
-            
-              Example: +hide-user-agent{Mozilla/5.0 (X11;
-              U; FreeBSD i386; en-US; rv:1.8.1.4) Gecko/20070602
-              Firefox/2.0.0.4}
-            
-          
-          
-            
-              Multi-value. These look exactly like parameterized actions, but
-              they behave differently: If the action applies multiple times
-              to the same URL, but with different parameters, all the parameters
-              from all
-              matches are remembered. This is used for actions that can be
-              executed for the same request repeatedly, like adding multiple
-              headers, or filtering through multiple filters. Syntax:
-            
-            
-            
-            
-              
-                
+            
+          
--  +name{param}   # enable action and add param to the list of parameters
-  -name{param}   # remove the parameter param from the list of parameters
+              
+
+          Note that if the URL matches multiple positive forms of a
+          parameterized action, the last match wins, i.e. the params from
+          earlier matches are simply ignored.
+
+          Example: +hide-user-agent{Mozilla/5.0 (X11;
+          U; FreeBSD i386; en-US; rv:1.8.1.4) Gecko/20070602
+          Firefox/2.0.0.4}
+        
+
+        
+          Multi-value. These look exactly like parameterized actions, but
+          they behave differently: If the action applies multiple times to
+          the same URL, but with different parameters, all the parameters from all matches are remembered. This is
+          used for actions that can be executed for the same request
+          repeatedly, like adding multiple headers, or filtering through
+          multiple filters. Syntax:
+
+          
+            
+              
-              
-            
+                +  +name{param}   # enable action and add param to the list of parameters
+  -name{param}   # remove the parameter param from the list of parameters
                 # If it was the last one left, disable the action.
   -name          # disable this action completely and remove all parameters from the list
+"REPLACEABLE c5">-name          # disable this action completely and remove all parameters from the list
 
-                
-
-            
-              Examples: +add-header{X-Fun-Header: Some
-              text} and +filter{html-annoyances}
-            
-          
-        
-
-        
-          If nothing is specified in any actions file, no "actions" are taken. So in this case Privoxy would just be a normal, non-blocking,
-          non-filtering proxy. You must specifically enable the privacy and
-          blocking features you need (although the provided default actions
-          files will give a good starting point).
-        
-        
-          Later defined action sections always over-ride earlier ones of the
-          same type. So exceptions to any rules you make, should come in the
-          latter part of the file (or in a file that is processed later when
-          using multiple actions files such as user.action). For multi-valued actions, the actions
-          are applied in the order they are specified. Actions files are
-          processed in the order they are defined in config (the default installation has three actions
-          files). It also quite possible for any given URL to match more than
-          one "pattern" (because of wildcards and
-          regular expressions), and thus to trigger more than one set of
-          actions! Last match wins.
-        
-        
-          The list of valid Privoxy actions
-          are:
-        
-        
-          
-            8.5.1. add-header
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Confuse log analysis, custom applications
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Sends a user defined HTTP header to the web server.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Multi-value.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  Any string value is possible. Validity of the defined HTTP
-                  headers is not checked. It is recommended that you use the
-                  "X-"
-                  prefix for custom headers.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  This action may be specified multiple times, in order to
-                  define multiple headers. This is rarely needed for the
-                  typical user. If you don't know what "HTTP headers" are, you definitely don't
-                  need to worry about this one.
-                
-                
-                  Headers added by this action are not modified by other
-                  actions.
-                
-              
-              
-                Example usage:
-              
-              
-                
-                
-                
-                  
-                    
+            
+          
-+              
+
+          Examples: +add-header{X-Fun-Header: Some
+          text} and +filter{html-annoyances}
+        
+      
+
+      If nothing is specified in any actions file, no "actions" are taken. So in this case Privoxy would just be a normal, non-blocking,
+      non-filtering proxy. You must specifically enable the privacy and
+      blocking features you need (although the provided default actions files
+      will give a good starting point).
+
+      Later defined action sections always over-ride earlier ones of the
+      same type. So exceptions to any rules you make, should come in the
+      latter part of the file (or in a file that is processed later when
+      using multiple actions files such as user.action). For multi-valued actions, the actions are
+      applied in the order they are specified. Actions files are processed in
+      the order they are defined in config (the
+      default installation has three actions files). It also quite possible
+      for any given URL to match more than one "pattern" (because of wildcards and regular
+      expressions), and thus to trigger more than one set of actions! Last
+      match wins.
+
+      The list of valid Privoxy actions
+      are:
+
+      
+        8.5.1.
+        add-header
+
+        
+          
+            Typical use:
+
+            
+              Confuse log analysis, custom applications
+            
+
+            Effect:
+
+            
+              Sends a user defined HTTP header to the web server.
+            
+
+            Type:
+
+            
+              Multi-value.
+            
+
+            Parameter:
+
+            
+              Any string value is possible. Validity of the defined HTTP
+              headers is not checked. It is recommended that you use the
+              "X-" prefix
+              for custom headers.
+            
+
+            Notes:
+
+            
+              This action may be specified multiple times, in order to
+              define multiple headers. This is rarely needed for the typical
+              user. If you don't know what "HTTP
+              headers" are, you definitely don't need to worry about
+              this one.
+
+              Headers added by this action are not modified by other
+              actions.
+            
+
+            Example usage:
+
+            
+              
+                
+                  
-                  
-                
+                     +add-header{X-User-Tracking: sucks}
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.2. block
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Block ads or other unwanted content
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Requests for URLs to which this action applies are blocked,
-                  i.e. the requests are trapped by Privoxy and the requested URL is never
-                  retrieved, but is answered locally with a substitute page
-                  or image, as determined by the handle-as-image,
-                  set-image-blocker,
-                  and handle-as-empty-document
-                  actions.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  A block reason that should be given to the user.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Privoxy sends a special
-                  "BLOCKED" page for requests to
-                  blocked pages. This page contains the block reason given as
-                  parameter, a link to find out why the block action applies,
-                  and a click-through to the blocked content (the latter only
-                  if the force feature is available and enabled).
-                
-                
-                  A very important exception occurs if both block and handle-as-image,
-                  apply to the same request: it will then be replaced by an
-                  image. If set-image-blocker
-                  (see below) also applies, the type of image will be
-                  determined by its parameter, if not, the standard
-                  checkerboard pattern is sent.
-                
-                
-                  It is important to understand this process, in order to
-                  understand how Privoxy
-                  deals with ads and other unwanted content. Blocking is a
-                  core feature, and one upon which various other features
-                  depend.
-                
-                
-                  The filter action can
-                  perform a very similar task, by "blocking" banner images and other content
-                  through rewriting the relevant URLs in the document's HTML
-                  source, so they don't get requested in the first place.
-                  Note that this is a totally different technique, and it's
-                  easy to confuse the two.
-                
-              
-              
-                Example usage (section):
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        8.5.2. block
+
+        
+          
+            Typical use:
+
+            
+              Block ads or other unwanted content
+            
+
+            Effect:
+
+            
+              Requests for URLs to which this action applies are blocked,
+              i.e. the requests are trapped by Privoxy and the requested URL is never
+              retrieved, but is answered locally with a substitute page or
+              image, as determined by the handle-as-image,
+              set-image-blocker,
+              and handle-as-empty-document
+              actions.
+            
+
+            Type:
+
+            
+              Parameterized.
+            
+
+            Parameter:
+
+            
+              A block reason that should be given to the user.
+            
+
+            Notes:
+
+            
+              Privoxy sends a special
+              "BLOCKED" page for requests to
+              blocked pages. This page contains the block reason given as
+              parameter, a link to find out why the block action applies, and
+              a click-through to the blocked content (the latter only if the
+              force feature is available and enabled).
+
+              A very important exception occurs if both block and handle-as-image,
+              apply to the same request: it will then be replaced by an
+              image. If set-image-blocker
+              (see below) also applies, the type of image will be determined
+              by its parameter, if not, the standard checkerboard pattern is
+              sent.
+
+              It is important to understand this process, in order to
+              understand how Privoxy deals
+              with ads and other unwanted content. Blocking is a core
+              feature, and one upon which various other features depend.
+
+              The filter action can perform a
+              very similar task, by "blocking"
+              banner images and other content through rewriting the relevant
+              URLs in the document's HTML source, so they don't get requested
+              in the first place. Note that this is a totally different
+              technique, and it's easy to confuse the two.
+            
+
+            Example usage (section):
+
+            
+              
+                
+                  
-                  
-                
+                     {+block{No nasty stuff for you.}}
 # Block and replace with "blocked" page
  .nasty-stuff.example.com
@@ -1299,255 +1089,212 @@ class="REPLACEABLE">param,
 # Block and then ignore
  adserver.example.net/.*\.js$
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.3.
-            change-x-forwarded-for
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Improve privacy by not forwarding the source of the request
-                  in the HTTP headers.
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Deletes the "X-Forwarded-For:"
-                  HTTP header from the client request, or adds a new one.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  
-                    
-                      "block" to delete the
-                      header.
-                    
-                  
-                  
-                    
-                      "add" to create the header
-                      (or append the client's IP address to an already
-                      existing one).
-                    
-                  
-                
-              
-              
-                Notes:
-              
-              
-                
-                  It is safe and recommended to use block.
-                
-                
-                  Forwarding the source address of the request may make sense
-                  in some multi-user setups but is also a privacy risk.
-                
-              
-              
-                Example usage:
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        8.5.3. change-x-forwarded-for
+
+        
+          
+            Typical use:
+
+            
+              Improve privacy by not forwarding the source of the request
+              in the HTTP headers.
+            
+
+            Effect:
+
+            
+              Deletes the "X-Forwarded-For:"
+              HTTP header from the client request, or adds a new one.
+            
+
+            Type:
+
+            
+              Parameterized.
+            
+
+            Parameter:
+
+            
+              
+                
+                  "block" to delete the
+                  header.
+                
+
+                
+                  "add" to create the header
+                  (or append the client's IP address to an already existing
+                  one).
+                
+              
+            
+
+            Notes:
+
+            
+              It is safe and recommended to use block.
+
+              Forwarding the source address of the request may make sense
+              in some multi-user setups but is also a privacy risk.
+            
+
+            Example usage:
+
+            
+              
+                
+                  
-                  
-                
+                     +change-x-forwarded-for{block}
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.4. client-header-filter
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Rewrite or remove single client headers.
-                
-              
-              
-                Effect:
-              
-              
-                
-                  All client headers to which this action applies are
-                  filtered on-the-fly through the specified regular
-                  expression based substitutions.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  The name of a client-header filter, as defined in one of
-                  the filter files.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Client-header filters are applied to each header on its
-                  own, not to all at once. This makes it easier to diagnose
-                  problems, but on the downside you can't write filters that
-                  only change header x if header y's value is z. You can do
-                  that by using tags though.
-                
-                
-                  Client-header filters are executed after the other header
-                  actions have finished and use their output as input.
-                
-                
-                  If the request URL gets changed, Privoxy will detect that and use the
-                  new one. This can be used to rewrite the request
-                  destination behind the client's back, for example to
-                  specify a Tor exit relay for certain requests.
-                
-                
-                  Please refer to the filter file
-                  chapter to learn which client-header filters are
-                  available by default, and how to create your own.
-                
-              
-              
-                Example usage (section):
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        8.5.4. client-header-filter
+
+        
+          
+            Typical use:
+
+            
+              Rewrite or remove single client headers.
+            
+
+            Effect:
+
+            
+              All client headers to which this action applies are filtered
+              on-the-fly through the specified regular expression based
+              substitutions.
+            
+
+            Type:
+
+            
+              Parameterized.
+            
+
+            Parameter:
+
+            
+              The name of a client-header filter, as defined in one of the
+              filter files.
+            
+
+            Notes:
+
+            
+              Client-header filters are applied to each header on its own,
+              not to all at once. This makes it easier to diagnose problems,
+              but on the downside you can't write filters that only change
+              header x if header y's value is z. You can do that by using
+              tags though.
+
+              Client-header filters are executed after the other header
+              actions have finished and use their output as input.
+
+              If the request URL gets changed, Privoxy will detect that and use the new
+              one. This can be used to rewrite the request destination behind
+              the client's back, for example to specify a Tor exit relay for
+              certain requests.
+
+              Please refer to the filter file
+              chapter to learn which client-header filters are available
+              by default, and how to create your own.
+            
+
+            Example usage (section):
+
+            
+              
+                
+                  
-                  
-                
+                     # Hide Tor exit notation in Host and Referer Headers
 {+client-header-filter{hide-tor-exit-notation}}
 /
 
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.5. client-header-tagger
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Block requests based on their headers.
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Client headers to which this action applies are filtered
-                  on-the-fly through the specified regular expression based
-                  substitutions, the result is used as tag.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  The name of a client-header tagger, as defined in one of
-                  the filter files.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Client-header taggers are applied to each header on its
-                  own, and as the header isn't modified, each tagger "sees" the original.
-                
-                
-                  Client-header taggers are the first actions that are
-                  executed and their tags can be used to control every other
-                  action.
-                
-              
-              
-                Example usage (section):
-              
-              
-                
-                
-                
-                  
-                    
-+      
+
+      
+        8.5.5. client-header-tagger
+
+        
+          
+            Typical use:
+
+            
+              Block requests based on their headers.
+            
+
+            Effect:
+
+            
+              Client headers to which this action applies are filtered
+              on-the-fly through the specified regular expression based
+              substitutions, the result is used as tag.
+            
+
+            Type:
+
+            
+              Parameterized.
+            
+
+            Parameter:
+
+            
+              The name of a client-header tagger, as defined in one of the
+              filter files.
+            
+
+            Notes:
+
+            
+              Client-header taggers are applied to each header on its own,
+              and as the header isn't modified, each tagger "sees" the original.
+
+              Client-header taggers are the first actions that are
+              executed and their tags can be used to control every other
+              action.
+            
+
+            Example usage (section):
+
+            
+              
+                
+                  
-                  
-                
+                     # Tag every request with the User-Agent header
 {+client-header-tagger{user-agent}}
 /
@@ -1571,126 +1318,107 @@ TAG:^User-Agent: fetch libfetch/
 TAG:^User-Agent: Ubuntu APT-HTTP/
 TAG:^User-Agent: MPlayer/
 
-
-                    
-              
-            
-          
-        
-        
-          
-            8.5.6.
-            content-type-overwrite
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Stop useless download menus from popping up, or change the
-                  browser's rendering mode
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Replaces the "Content-Type:"
-                  HTTP server header.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  Any string.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  The "Content-Type:" HTTP server
-                  header is used by the browser to decide what to do with the
-                  document. The value of this header can cause the browser to
-                  open a download menu instead of displaying the document by
-                  itself, even if the document's format is supported by the
-                  browser.
-                
-                
-                  The declared content type can also affect which rendering
-                  mode the browser chooses. If XHTML is delivered as "text/html", many browsers treat it as
-                  yet another broken HTML document. If it is send as "application/xml", browsers with XHTML
-                  support will only display it, if the syntax is correct.
-                
-                
-                  If you see a web site that proudly uses XHTML buttons, but
-                  sets "Content-Type: text/html",
-                  you can use Privoxy to
-                  overwrite it with "application/xml" and validate the web
-                  master's claim inside your XHTML-supporting browser. If the
-                  syntax is incorrect, the browser will complain loudly.
-                
-                
-                  You can also go the opposite direction: if your browser
-                  prints error messages instead of rendering a document
-                  falsely declared as XHTML, you can overwrite the content
-                  type with "text/html" and have
-                  it rendered as broken HTML document.
-                
-                
-                  By default content-type-overwrite
-                  only replaces "Content-Type:"
-                  headers that look like some kind of text. If you want to
-                  overwrite it unconditionally, you have to combine it with
-                  force-text-mode.
-                  This limitation exists for a reason, think twice before
-                  circumventing it.
-                
-                
-                  Most of the time it's easier to replace this action with a
-                  custom server-header
-                  filter. It allows you to activate it for every
-                  document of a certain site and it will still only replace
-                  the content types you aimed at.
-                
-                
-                  Of course you can apply content-type-overwrite to a whole site and
-                  then make URL based exceptions, but it's a lot more work to
-                  get the same precision.
-                
-              
-              
-                Example usage (sections):
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+
+                  
+            
+          
+        
+      
+
+      
+        8.5.6. content-type-overwrite
+
+        
+          
+            Typical use:
+
+            
+              Stop useless download menus from popping up, or change the
+              browser's rendering mode
+            
+
+            Effect:
+
+            
+              Replaces the "Content-Type:" HTTP
+              server header.
+            
+
+            Type:
+
+            
+              Parameterized.
+            
+
+            Parameter:
+
+            
+              Any string.
+            
+
+            Notes:
+
+            
+              The "Content-Type:" HTTP server
+              header is used by the browser to decide what to do with the
+              document. The value of this header can cause the browser to
+              open a download menu instead of displaying the document by
+              itself, even if the document's format is supported by the
+              browser.
+
+              The declared content type can also affect which rendering
+              mode the browser chooses. If XHTML is delivered as "text/html", many browsers treat it as yet
+              another broken HTML document. If it is send as "application/xml", browsers with XHTML support
+              will only display it, if the syntax is correct.
+
+              If you see a web site that proudly uses XHTML buttons, but
+              sets "Content-Type: text/html", you
+              can use Privoxy to overwrite
+              it with "application/xml" and
+              validate the web master's claim inside your XHTML-supporting
+              browser. If the syntax is incorrect, the browser will complain
+              loudly.
+
+              You can also go the opposite direction: if your browser
+              prints error messages instead of rendering a document falsely
+              declared as XHTML, you can overwrite the content type with
+              "text/html" and have it rendered as
+              broken HTML document.
+
+              By default content-type-overwrite
+              only replaces "Content-Type:"
+              headers that look like some kind of text. If you want to
+              overwrite it unconditionally, you have to combine it with
+              force-text-mode.
+              This limitation exists for a reason, think twice before
+              circumventing it.
+
+              Most of the time it's easier to replace this action with a
+              custom server-header
+              filter. It allows you to activate it for every
+              document of a certain site and it will still only replace the
+              content types you aimed at.
+
+              Of course you can apply content-type-overwrite to a whole site and then
+              make URL based exceptions, but it's a lot more work to get the
+              same precision.
+            
+
+            Example usage (sections):
+
+            
+              
+                
+                  
+                
+              
+                     # Check if www.example.net/ really uses valid XHTML
 { +content-type-overwrite{application/xml} }
 www.example.net/
@@ -1700,197 +1428,166 @@ www.example.net/
 www.example.net/.*\.css$
 www.example.net/.*style
 
+                  
+            
+          
+        
+      
+
+      
+        8.5.7. crunch-client-header
+
+        
+          
+            Typical use:
+
+            
+              Remove a client header Privoxy has no dedicated action for.
+            
+
+            Effect:
+
+            
+              Deletes every header sent by the client that contains the
+              string the user supplied as parameter.
+            
+
+            Type:
+
+            
+              Parameterized.
+            
+
+            Parameter:
+
+            
+              Any string.
+            
+
+            Notes:
+
+            
+              This action allows you to block client headers for which no
+              dedicated Privoxy action
+              exists. Privoxy will remove
+              every client header that contains the string you supplied as
+              parameter.
+
+              Regular expressions are not supported and you can't use
+              this action to block different headers in the same request,
+              unless they contain the same string.
+
+              crunch-client-header is only meant
+              for quick tests. If you have to block several different
+              headers, or only want to modify parts of them, you should use a
+              client-header
+              filter.
+
+              
+                
+                  
+                    
+                  
+
+                  
+                    Warning

+                      Don't block any header without understanding the
+                      consequences.
                     
                   
                 
-              
-            
-          
-        
-        
-          
-            8.5.7. crunch-client-header
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Remove a client header Privoxy has no dedicated action for.
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Deletes every header sent by the client that contains the
-                  string the user supplied as parameter.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  Any string.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  This action allows you to block client headers for which no
-                  dedicated Privoxy action
-                  exists. Privoxy will
-                  remove every client header that contains the string you
-                  supplied as parameter.
-                
-                
-                  Regular expressions are not supported and you can't use this
-                  action to block different headers in the same request,
-                  unless they contain the same string.
-                
-                
-                  crunch-client-header is only meant
-                  for quick tests. If you have to block several different
-                  headers, or only want to modify parts of them, you should
-                  use a client-header
-                  filter.
-                
-                
-                  
-                    
-                      
-                    
-                    
-                      
-                    
-                  
-                        Warning
-                      

-                        
-                          Don't block any header without understanding the
-                          consequences.
-                        
-                      
-                
-              
-              
-                Example usage (section):
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+              
+            
+
+            Example usage (section):
+
+            
+              
+                
+                  
-                  
-                
+                     # Block the non-existent "Privacy-Violation:" client header
 { +crunch-client-header{Privacy-Violation:} }
 /
 
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.8. crunch-if-none-match
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Prevent yet another way to track the user's steps between
-                  sessions.
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Deletes the "If-None-Match:"
-                  HTTP client header.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Boolean.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  N/A
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Removing the "If-None-Match:"
-                  HTTP client header is useful for filter testing, where you
-                  want to force a real reload instead of getting status code
-                  "304" which would cause the
-                  browser to use a cached copy of the page.
-                
-                
-                  It is also useful to make sure the header isn't used as a
-                  cookie replacement (unlikely but possible).
-                
-                
-                  Blocking the "If-None-Match:"
-                  header shouldn't cause any caching problems, as long as the
-                  "If-Modified-Since:" header
-                  isn't blocked or missing as well.
-                
-                
-                  It is recommended to use this action together with hide-if-modified-since
-                  and overwrite-last-modified.
-                
-              
-              
-                Example usage (section):
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        8.5.8. crunch-if-none-match
+
+        
+          
+            Typical use:
+
+            
+              Prevent yet another way to track the user's steps between
+              sessions.
+            
+
+            Effect:
+
+            
+              Deletes the "If-None-Match:" HTTP
+              client header.
+            
+
+            Type:
+
+            
+              Boolean.
+            
+
+            Parameter:
+
+            
+              N/A
+            
+
+            Notes:
+
+            
+              Removing the "If-None-Match:"
+              HTTP client header is useful for filter testing, where you want
+              to force a real reload instead of getting status code
+              "304" which would cause the browser
+              to use a cached copy of the page.
+
+              It is also useful to make sure the header isn't used as a
+              cookie replacement (unlikely but possible).
+
+              Blocking the "If-None-Match:"
+              header shouldn't cause any caching problems, as long as the
+              "If-Modified-Since:" header isn't
+              blocked or missing as well.
+
+              It is recommended to use this action together with
+              hide-if-modified-since
+              and overwrite-last-modified.
+            
+
+            Example usage (section):
+
+            
+              
+                
+                  
-                  
-                
+                     # Let the browser revalidate cached documents but don't
 # allow the server to use the revalidation headers for user tracking.
 {+hide-if-modified-since{-60} \
@@ -1898,1302 +1595,1140 @@ www.example.net/.*style
  +crunch-if-none-match}
 /
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.9.
-            crunch-incoming-cookies
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Prevent the web server from setting HTTP cookies on your
-                  system
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Deletes any "Set-Cookie:" HTTP
-                  headers from server replies.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Boolean.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  N/A
-                
-              
-              
-                Notes:
-              
-              
-                
-                  This action is only concerned with incoming HTTP
-                  cookies. For outgoing HTTP cookies, use crunch-outgoing-cookies.
-                  Use both to disable HTTP cookies
-                  completely.
-                
-                
-                  It makes no
-                  sense at all to use this action in conjunction
-                  with the session-cookies-only
-                  action, since it would prevent the session cookies from
-                  being set. See also filter-content-cookies.
-                
-              
-              
-                Example usage:
-              
-              
-                
-                
-                
-                  
-                    
-+      
+
+      
+        8.5.9. crunch-incoming-cookies
+
+        
+          
+            Typical use:
+
+            
+              Prevent the web server from setting HTTP cookies on your
+              system
+            
+
+            Effect:
+
+            
+              Deletes any "Set-Cookie:" HTTP
+              headers from server replies.
+            
+
+            Type:
+
+            
+              Boolean.
+            
+
+            Parameter:
+
+            
+              N/A
+            
+
+            Notes:
+
+            
+              This action is only concerned with incoming HTTP cookies. For
+              outgoing HTTP
+              cookies, use crunch-outgoing-cookies.
+              Use both to disable
+              HTTP cookies completely.
+
+              It makes no sense at
+              all to use this action in conjunction with the
+              session-cookies-only
+              action, since it would prevent the session cookies from being
+              set. See also filter-content-cookies.
+            
+
+            Example usage:
+
+            
+              
+                
+                  
+                
+              
+                     +crunch-incoming-cookies
 
+                  
+            
+          
+        
+      
+
+      
+        8.5.10. crunch-server-header
+
+        
+          
+            Typical use:
+
+            
+              Remove a server header Privoxy has no dedicated action for.
+            
+
+            Effect:
+
+            
+              Deletes every header sent by the server that contains the
+              string the user supplied as parameter.
+            
+
+            Type:
+
+            
+              Parameterized.
+            
+
+            Parameter:
+
+            
+              Any string.
+            
+
+            Notes:
+
+            
+              This action allows you to block server headers for which no
+              dedicated Privoxy action
+              exists. Privoxy will remove
+              every server header that contains the string you supplied as
+              parameter.
+
+              Regular expressions are not supported and you can't use
+              this action to block different headers in the same request,
+              unless they contain the same string.
+
+              crunch-server-header is only meant
+              for quick tests. If you have to block several different
+              headers, or only want to modify parts of them, you should use a
+              custom server-header
+              filter.
+
+              
+                
+                  
+                    
+                  
+
+                  
+                    Warning

+                      Don't block any header without understanding the
+                      consequences.
                     
                   
                 
-              
-            
-          
-        
-        
-          
-            8.5.10. crunch-server-header
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Remove a server header Privoxy has no dedicated action for.
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Deletes every header sent by the server that contains the
-                  string the user supplied as parameter.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  Any string.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  This action allows you to block server headers for which no
-                  dedicated Privoxy action
-                  exists. Privoxy will
-                  remove every server header that contains the string you
-                  supplied as parameter.
-                
-                
-                  Regular expressions are not supported and you can't use this
-                  action to block different headers in the same request,
-                  unless they contain the same string.
-                
-                
-                  crunch-server-header is only meant
-                  for quick tests. If you have to block several different
-                  headers, or only want to modify parts of them, you should
-                  use a custom server-header
-                  filter.
-                
-                
-                  
-                    
-                      
-                    
-                    
-                      
-                    
-                  
-                        Warning
-                      

-                        
-                          Don't block any header without understanding the
-                          consequences.
-                        
-                      
-                
-              
-              
-                Example usage (section):
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+              
+            
+
+            Example usage (section):
+
+            
+              
+                
+                  
-                  
-                
+                     # Crunch server headers that try to prevent caching
 { +crunch-server-header{no-cache} }
 /
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.11.
-            crunch-outgoing-cookies
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Prevent the web server from reading any HTTP cookies from
-                  your system
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Deletes any "Cookie:" HTTP
-                  headers from client requests.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Boolean.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  N/A
-                
-              
-              
-                Notes:
-              
-              
-                
-                  This action is only concerned with outgoing HTTP
-                  cookies. For incoming HTTP cookies, use crunch-incoming-cookies.
-                  Use both to disable HTTP cookies
-                  completely.
-                
-                
-                  It makes no
-                  sense at all to use this action in conjunction
-                  with the session-cookies-only
-                  action, since it would prevent the session cookies from
-                  being read.
-                
-              
-              
-                Example usage:
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        8.5.11. crunch-outgoing-cookies
+
+        
+          
+            Typical use:
+
+            
+              Prevent the web server from reading any HTTP cookies from
+              your system
+            
+
+            Effect:
+
+            
+              Deletes any "Cookie:" HTTP
+              headers from client requests.
+            
+
+            Type:
+
+            
+              Boolean.
+            
+
+            Parameter:
+
+            
+              N/A
+            
+
+            Notes:
+
+            
+              This action is only concerned with outgoing HTTP cookies. For
+              incoming HTTP
+              cookies, use crunch-incoming-cookies.
+              Use both to disable
+              HTTP cookies completely.
+
+              It makes no sense at
+              all to use this action in conjunction with the
+              session-cookies-only
+              action, since it would prevent the session cookies from being
+              read.
+            
+
+            Example usage:
+
+            
+              
+                
+                  
-                  
-                
+                     +crunch-outgoing-cookies
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.12. deanimate-gifs
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Stop those annoying, distracting animated GIF images.
-                
-              
-              
-                Effect:
-              
-              
-                
-                  De-animate GIF animations, i.e. reduce them to their first
-                  or last image.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  "last" or "first"
-                
-              
-              
-                Notes:
-              
-              
-                
-                  This will also shrink the images considerably (in bytes,
-                  not pixels!). If the option "first" is given, the first frame of the
-                  animation is used as the replacement. If "last" is given, the last frame of the
-                  animation is used instead, which probably makes more sense
-                  for most banner animations, but also has the risk of not
-                  showing the entire last frame (if it is only a delta to an
-                  earlier frame).
-                
-                
-                  You can safely use this action with patterns that will also
-                  match non-GIF objects, because no attempt will be made at
-                  anything that doesn't look like a GIF.
-                
-              
-              
-                Example usage:
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        8.5.12. deanimate-gifs
+
+        
+          
+            Typical use:
+
+            
+              Stop those annoying, distracting animated GIF images.
+            
+
+            Effect:
+
+            
+              De-animate GIF animations, i.e. reduce them to their first
+              or last image.
+            
+
+            Type:
+
+            
+              Parameterized.
+            
+
+            Parameter:
+
+            
+              "last" or "first"
+            
+
+            Notes:
+
+            
+              This will also shrink the images considerably (in bytes, not
+              pixels!). If the option "first" is
+              given, the first frame of the animation is used as the
+              replacement. If "last" is given, the
+              last frame of the animation is used instead, which probably
+              makes more sense for most banner animations, but also has the
+              risk of not showing the entire last frame (if it is only a
+              delta to an earlier frame).
+
+              You can safely use this action with patterns that will also
+              match non-GIF objects, because no attempt will be made at
+              anything that doesn't look like a GIF.
+            
+
+            Example usage:
+
+            
+              
+                
+                  
-                  
-                
+                     +deanimate-gifs{last}
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.13.
-            downgrade-http-version
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Work around (very rare) problems with HTTP/1.1
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Downgrades HTTP/1.1 client requests and server replies to
-                  HTTP/1.0.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Boolean.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  N/A
-                
-              
-              
-                Notes:
-              
-              
-                
-                  This is a left-over from the time when Privoxy didn't support important
-                  HTTP/1.1 features well. It is left here for the unlikely
-                  case that you experience HTTP/1.1 related problems with
-                  some server out there. Not all HTTP/1.1 features and
-                  requirements are supported yet, so there is a chance you
-                  might need this action.
-                
-              
-              
-                Example usage (section):
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        8.5.13. downgrade-http-version
+
+        
+          
+            Typical use:
+
+            
+              Work around (very rare) problems with HTTP/1.1
+            
+
+            Effect:
+
+            
+              Downgrades HTTP/1.1 client requests and server replies to
+              HTTP/1.0.
+            
+
+            Type:
+
+            
+              Boolean.
+            
+
+            Parameter:
+
+            
+              N/A
+            
+
+            Notes:
+
+            
+              This is a left-over from the time when Privoxy didn't support important HTTP/1.1
+              features well. It is left here for the unlikely case that you
+              experience HTTP/1.1 related problems with some server out
+              there. Not all HTTP/1.1 features and requirements are supported
+              yet, so there is a chance you might need this action.
+            
+
+            Example usage (section):
+
+            
+              
+                
+                  
-                  
-                
+                     {+downgrade-http-version}
 problem-host.example.com
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.14. fast-redirects
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Fool some click-tracking scripts and speed up indirect
-                  links.
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Detects redirection URLs and redirects the browser without
-                  contacting the redirection server first.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  
-                    
-                      "simple-check" to just
-                      search for the string "http://" to detect redirection URLs.
-                    
-                  
-                  
-                    
-                      "check-decoded-url" to
-                      decode URLs (if necessary) before searching for
-                      redirection URLs.
-                    
-                  
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Many sites, like yahoo.com, don't just link to other sites.
-                  Instead, they will link to some script on their own
-                  servers, giving the destination as a parameter, which will
-                  then redirect you to the final target. URLs resulting from
-                  this scheme typically look like: "http://www.example.org/click-tracker.cgi?target=http%3a//www.example.net/".
-                
-                
-                  Sometimes, there are even multiple consecutive redirects
-                  encoded in the URL. These redirections via scripts make
-                  your web browsing more traceable, since the server from
-                  which you follow such a link can see where you go to. Apart
-                  from that, valuable bandwidth and time is wasted, while
-                  your browser asks the server for one redirect after the
-                  other. Plus, it feeds the advertisers.
-                
-                
-                  This feature is currently not very smart and is scheduled
-                  for improvement. If it is enabled by default, you will have
-                  to create some exceptions to this action. It can lead to
-                  failures in several ways:
-                
-                
-                  Not every URLs with other URLs as parameters is evil. Some
-                  sites offer a real service that requires this information
-                  to work. For example a validation service needs to know,
-                  which document to validate. fast-redirects assumes that every URL
-                  parameter that looks like another URL is a redirection
-                  target, and will always redirect to the last one. Most of
-                  the time the assumption is correct, but if it isn't, the
-                  user gets redirected anyway.
-                
-                
-                  Another failure occurs if the URL contains other parameters
-                  after the URL parameter. The URL: "http://www.example.org/?redirect=http%3a//www.example.net/&foo=bar".
-                  contains the redirection URL "http://www.example.net/", followed by
-                  another parameter. fast-redirects
-                  doesn't know that and will cause a redirect to "http://www.example.net/&foo=bar".
-                  Depending on the target server configuration, the parameter
-                  will be silently ignored or lead to a "page not found" error. You can prevent this
-                  problem by first using the redirect action to
-                  remove the last part of the URL, but it requires a little
-                  effort.
-                
-                
-                  To detect a redirection URL, fast-redirects only looks for the string
-                  "http://", either in plain text
-                  (invalid but often used) or encoded as "http%3a//". Some sites use their own URL
-                  encoding scheme, encrypt the address of the target server
-                  or replace it with a database id. In theses cases fast-redirects is fooled and the
-                  request reaches the redirection server where it probably
-                  gets logged.
-                
-              
-              
-                Example usage:
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        8.5.14. fast-redirects
+
+        
+          
+            Typical use:
+
+            
+              Fool some click-tracking scripts and speed up indirect
+              links.
+            
+
+            Effect:
+
+            
+              Detects redirection URLs and redirects the browser without
+              contacting the redirection server first.
+            
+
+            Type:
+
+            
+              Parameterized.
+            
+
+            Parameter:
+
+            
+              
+                
+                  "simple-check" to just search
+                  for the string "http://" to
+                  detect redirection URLs.
+                
+
+                
+                  "check-decoded-url" to decode
+                  URLs (if necessary) before searching for redirection
+                  URLs.
+                
+              
+            
+
+            Notes:
+
+            
+              Many sites, like yahoo.com, don't just link to other sites.
+              Instead, they will link to some script on their own servers,
+              giving the destination as a parameter, which will then redirect
+              you to the final target. URLs resulting from this scheme
+              typically look like: "http://www.example.org/click-tracker.cgi?target=http%3a//www.example.net/".
+
+              Sometimes, there are even multiple consecutive redirects
+              encoded in the URL. These redirections via scripts make your
+              web browsing more traceable, since the server from which you
+              follow such a link can see where you go to. Apart from that,
+              valuable bandwidth and time is wasted, while your browser asks
+              the server for one redirect after the other. Plus, it feeds the
+              advertisers.
+
+              This feature is currently not very smart and is scheduled
+              for improvement. If it is enabled by default, you will have to
+              create some exceptions to this action. It can lead to failures
+              in several ways:
+
+              Not every URLs with other URLs as parameters is evil. Some
+              sites offer a real service that requires this information to
+              work. For example a validation service needs to know, which
+              document to validate. fast-redirects
+              assumes that every URL parameter that looks like another URL is
+              a redirection target, and will always redirect to the last one.
+              Most of the time the assumption is correct, but if it isn't,
+              the user gets redirected anyway.
+
+              Another failure occurs if the URL contains other parameters
+              after the URL parameter. The URL: "http://www.example.org/?redirect=http%3a//www.example.net/&foo=bar".
+              contains the redirection URL "http://www.example.net/", followed by another
+              parameter. fast-redirects doesn't know
+              that and will cause a redirect to "http://www.example.net/&foo=bar". Depending
+              on the target server configuration, the parameter will be
+              silently ignored or lead to a "page not
+              found" error. You can prevent this problem by first
+              using the redirect action to remove
+              the last part of the URL, but it requires a little effort.
+
+              To detect a redirection URL, fast-redirects only looks for the string
+              "http://", either in plain text
+              (invalid but often used) or encoded as "http%3a//". Some sites use their own URL
+              encoding scheme, encrypt the address of the target server or
+              replace it with a database id. In theses cases fast-redirects is fooled and the request reaches
+              the redirection server where it probably gets logged.
+            
+
+            Example usage:
+
+            
+              
+                
+                  
-                  
-                
+                      { +fast-redirects{simple-check} }
    one.example.com
 
  { +fast-redirects{check-decoded-url} }
    another.example.com/testing
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.15. filter
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Get rid of HTML and JavaScript annoyances, banner
-                  advertisements (by size), do fun text replacements, add
-                  personalized effects, etc.
-                
-              
-              
-                Effect:
-              
-              
-                
-                  All instances of text-based type, most notably HTML and
-                  JavaScript, to which this action applies, can be filtered
-                  on-the-fly through the specified regular expression based
-                  substitutions. (Note: as of version 3.0.3 plain text
-                  documents are exempted from filtering, because web servers
-                  often use the text/plain MIME type
-                  for all files whose type they don't know.)
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  The name of a content filter, as defined in the filter file. Filters can be defined
-                  in one or more files as defined by the filterfile option in the
-                  config file. default.filter is the collection of filters
-                  supplied by the developers. Locally defined filters should
-                  go in their own file, such as user.filter.
-                
-                
-                  When used in its negative form, and without parameters,
-                  all
-                  filtering is completely disabled.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  For your convenience, there are a number of pre-defined
-                  filters available in the distribution filter file that you
-                  can use. See the examples below for a list.
-                
-                
-                  Filtering requires buffering the page content, which may
-                  appear to slow down page rendering since nothing is
-                  displayed until all content has passed the filters. (The
-                  total time until the page is completely rendered doesn't
-                  change much, but it may be perceived as slower since the
-                  page is not incrementally displayed.) This effect will be
-                  more noticeable on slower connections.
-                
-                
-                  "Rolling your own" filters
-                  requires a knowledge of "Regular Expressions"
-                  and "HTML". This is very
-                  powerful feature, and potentially very intrusive. Filters
-                  should be used with caution, and where an equivalent "action" is not available.
-                
-                
-                  The amount of data that can be filtered is limited to the
-                  buffer-limit option in
-                  the main config file. The default
-                  is 4096 KB (4 Megs). Once this limit is exceeded, the
-                  buffered data, and all pending data, is passed through
-                  unfiltered.
-                
-                
-                  Inappropriate MIME types, such as zipped files, are not
-                  filtered at all. (Again, only text-based types except plain
-                  text). Encrypted SSL data (from HTTPS servers) cannot be
-                  filtered either, since this would violate the integrity of
-                  the secure transaction. In some situations it might be
-                  necessary to protect certain text, like source code, from
-                  filtering by defining appropriate -filter exceptions.
-                
-                
-                  Compressed content can't be filtered either, unless Privoxy is compiled with zlib
-                  support (requires at least Privoxy 3.0.7), in which case Privoxy will decompress the
-                  content before filtering it.
-                
-                
-                  If you use a Privoxy
-                  version without zlib support, but want filtering to work on
-                  as much documents as possible, even those that would
-                  normally be sent compressed, you must use the prevent-compression
-                  action in conjunction with filter.
-                
-                
-                  Content filtering can achieve some of the same effects as
-                  the block action, i.e. it
-                  can be used to block ads and banners. But the mechanism
-                  works quite differently. One effective use, is to block ad
-                  banners based on their size (see below), since many of
-                  these seem to be somewhat standardized.
-                
-                
-                  Feedback with suggestions for
-                  new or improved filters is particularly welcome!
-                
-                
-                  The below list has only the names and a one-line
-                  description of each predefined filter. There are more verbose
-                  explanations of what these filters do in the filter file chapter.
-                
-              
-              
-                Example usage (with filters from the distribution default.filter file). See the Predefined Filters
-                section for more explanation on each:
-              
-              
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        8.5.15.
+        filter
+
+        
+          
+            Typical use:
+
+            
+              Get rid of HTML and JavaScript annoyances, banner
+              advertisements (by size), do fun text replacements, add
+              personalized effects, etc.
+            
+
+            Effect:
+
+            
+              All instances of text-based type, most notably HTML and
+              JavaScript, to which this action applies, can be filtered
+              on-the-fly through the specified regular expression based
+              substitutions. (Note: as of version 3.0.3 plain text documents
+              are exempted from filtering, because web servers often use the
+              text/plain MIME type for all files
+              whose type they don't know.)
+            
+
+            Type:
+
+            
+              Parameterized.
+            
+
+            Parameter:
+
+            
+              The name of a content filter, as defined in the filter file. Filters can be defined in
+              one or more files as defined by the filterfile
+              option in the config file. default.filter is the collection of filters
+              supplied by the developers. Locally defined filters should go
+              in their own file, such as user.filter.
+
+              When used in its negative form, and without parameters,
+              all filtering is
+              completely disabled.
+            
+
+            Notes:
+
+            
+              For your convenience, there are a number of pre-defined
+              filters available in the distribution filter file that you can
+              use. See the examples below for a list.
+
+              Filtering requires buffering the page content, which may
+              appear to slow down page rendering since nothing is displayed
+              until all content has passed the filters. (The total time until
+              the page is completely rendered doesn't change much, but it may
+              be perceived as slower since the page is not incrementally
+              displayed.) This effect will be more noticeable on slower
+              connections.
+
+              "Rolling your own" filters
+              requires a knowledge of "Regular Expressions" and
+              "HTML". This is very
+              powerful feature, and potentially very intrusive. Filters
+              should be used with caution, and where an equivalent
+              "action" is not available.
+
+              The amount of data that can be filtered is limited to the
+              buffer-limit option in the
+              main config file. The default is 4096
+              KB (4 Megs). Once this limit is exceeded, the buffered data,
+              and all pending data, is passed through unfiltered.
+
+              Inappropriate MIME types, such as zipped files, are not
+              filtered at all. (Again, only text-based types except plain
+              text). Encrypted SSL data (from HTTPS servers) cannot be
+              filtered either, since this would violate the integrity of the
+              secure transaction. In some situations it might be necessary to
+              protect certain text, like source code, from filtering by
+              defining appropriate -filter
+              exceptions.
+
+              Compressed content can't be filtered either, but if
+              Privoxy is compiled with zlib
+              support and a supported compression algorithm is used (gzip or
+              deflate), Privoxy can first
+              decompress the content and then filter it.
+
+              If you use a Privoxy
+              version without zlib support, but want filtering to work on as
+              much documents as possible, even those that would normally be
+              sent compressed, you must use the prevent-compression
+              action in conjunction with filter.
+
+              Content filtering can achieve some of the same effects as
+              the block action, i.e. it can be
+              used to block ads and banners. But the mechanism works quite
+              differently. One effective use, is to block ad banners based on
+              their size (see below), since many of these seem to be somewhat
+              standardized.
+
+              Feedback with suggestions for new
+              or improved filters is particularly welcome!
+
+              The below list has only the names and a one-line description
+              of each predefined filter. There are more verbose
+              explanations of what these filters do in the filter file chapter.
+            
+
+            Example usage (with filters from the distribution default.filter file). See the Predefined Filters
+            section for more explanation on each:
+
+            
+              
+
+              
+                
+                  
-                  
-                
+                     +filter{js-annoyances}       # Get rid of particularly annoying JavaScript abuse.
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{js-events}           # Kill all JS event bindings and timers (Radically destructive! Only for extra nasty sites).
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{html-annoyances}     # Get rid of particularly annoying HTML abuse.
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{content-cookies}     # Kill cookies that come in the HTML or JS content.
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{refresh-tags}        # Kill automatic refresh tags (for dial-on-demand setups).
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{unsolicited-popups}  # Disable only unsolicited pop-up windows. Useful if your browser lacks this ability.
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{all-popups}          # Kill all popups in JavaScript and HTML. Useful if your browser lacks this ability.
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{img-reorder}         # Reorder attributes in <img> tags to make the banners-by-* filters more effective.
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{banners-by-size}     # Kill banners by size.
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{banners-by-link}     # Kill banners by their links to known clicktrackers.
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{webbugs}             # Squish WebBugs (1x1 invisible GIFs used for user tracking).
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{tiny-textforms}      # Extend those tiny textareas up to 40x80 and kill the hard wrap.
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{jumping-windows}     # Prevent windows from resizing and moving themselves.
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
-                  
-                
--+filter{frameset-borders}    # Give frames a border and make them resizable.
-
-                    
+              
+
+              
+                
+                  
+                
+              
+                    ++filter{frameset-borders}    # Give frames a border and make them resizable.
+
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{demoronizer}         # Fix MS's non-standard use of standard charsets.
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{shockwave-flash}     # Kill embedded Shockwave Flash objects.
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{quicktime-kioskmode} # Make Quicktime movies saveable.
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{fun}                 # Text replacements for subversive browsing fun!
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{crude-parental}      # Crude parental filtering. Note that this filter doesn't work reliably.
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{ie-exploits}         # Disable some known Internet Explorer bug exploits.
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{site-specifics}      # Cure for site-specific problems. Don't apply generally!
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{no-ping}             # Removes non-standard ping attributes in <a> and <area> tags.
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{google}              # CSS-based block for Google text ads. Also removes a width limitation and the toolbar advertisement.
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{yahoo}               # CSS-based block for Yahoo text ads. Also removes a width limitation.
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
+                
+              
-+              
+
+              
+                
+                  
-                  
-                
+                     +filter{msn}                 # CSS-based block for MSN text ads. Also removes tracking URLs and a width limitation.
 
-                    
+                  
 
-                
-                  
-                
-                
-                  
-                    
-+              
+
+              
+                
+                  
+                
+              
+                     +filter{blogspot}            # Cleans up some Blogspot blogs. Read the fine print before using this.
 
+                  
+            
+          
+        
+      
+
+      
+        8.5.16. force-text-mode
+
+        
+          
+            Typical use:
+
+            
+              Force Privoxy to treat a
+              document as if it was in some kind of text format.
+            
+
+            Effect:
+
+            
+              Declares a document as text, even if the "Content-Type:" isn't detected as such.
+            
+
+            Type:
+
+            
+              Boolean.
+            
+
+            Parameter:
+
+            
+              N/A
+            
+
+            Notes:
+
+            
+              As explained above, Privoxy tries to only filter files that
+              are in some kind of text format. The same restrictions apply to
+              content-type-overwrite.
+              force-text-mode declares a document as
+              text, without looking at the "Content-Type:" first.
+
+              
+                
+                  
+                    
+                  
+
+                  
+                    Warning

+                      Think twice before activating this action. Filtering
+                      binary data with regular expressions can cause file
+                      damage.
                     
                   
                 
-              
-            
-          
-        
-        
-          
-            8.5.16. force-text-mode
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Force Privoxy to treat a
-                  document as if it was in some kind of text format.
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Declares a document as text, even if the "Content-Type:" isn't detected as such.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Boolean.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  N/A
-                
-              
-              
-                Notes:
-              
-              
-                
-                  As explained above, Privoxy tries to only filter files
-                  that are in some kind of text format. The same restrictions
-                  apply to content-type-overwrite.
-                  force-text-mode declares a
-                  document as text, without looking at the "Content-Type:" first.
-                
-                
-                  
-                    
-                      
-                    
-                    
-                      
-                    
-                  
-                        Warning
-                      

-                        
-                          Think twice before activating this action.
-                          Filtering binary data with regular expressions can
-                          cause file damage.
-                        
-                      
-                
-              
-              
-                Example usage:
-              
-              
-                
-                
-                
-                  
-                    
-+              
+            
+
+            Example usage:
+
+            
+              
+                
+                  
+                
+              
+                     +force-text-mode
 
 
+                  
+            
+          
+        
+      
+
+      
+        8.5.17. forward-override
+
+        
+          
+            Typical use:
+
+            
+              Change the forwarding settings based on User-Agent or
+              request origin
+            
+
+            Effect:
+
+            
+              Overrules the forward directives in the configuration
+              file.
+            
+
+            Type:
+
+            
+              Multi-value.
+            
+
+            Parameter:
+
+            
+              
+                
+                  "forward ." to use a direct
+                  connection without any additional proxies.
+                
+
+                
+                  "forward 127.0.0.1:8123" to
+                  use the HTTP proxy listening at 127.0.0.1 port 8123.
+                
+
+                
+                  "forward-socks4a 127.0.0.1:9050
+                  ." to use the socks4a proxy listening at 127.0.0.1
+                  port 9050. Replace "forward-socks4a" with "forward-socks4" to use a socks4 connection
+                  (with local DNS resolution) instead, use "forward-socks5" for socks5 connections
+                  (with remote DNS resolution).
+                
+
+                
+                  "forward-socks4a 127.0.0.1:9050
+                  proxy.example.org:8000" to use the socks4a proxy
+                  listening at 127.0.0.1 port 9050 to reach the HTTP proxy
+                  listening at proxy.example.org port 8000. Replace
+                  "forward-socks4a" with
+                  "forward-socks4" to use a socks4
+                  connection (with local DNS resolution) instead, use
+                  "forward-socks5" for socks5
+                  connections (with remote DNS resolution).
+                
+              
+            
+
+            Notes:
+
+            
+              This action takes parameters similar to the forward directives in the
+              configuration file, but without the URL pattern. It can be used
+              as replacement, but normally it's only used in cases where
+              matching based on the request URL isn't sufficient.
+
+              
+                
+                  
+                    
+                  
+
+                  
+                    Warning

+                      Please read the description for the forward directives before
+                      using this action. Forwarding to the wrong people will
+                      reduce your privacy and increase the chances of
+                      man-in-the-middle attacks.
+
+                      If the ports are missing or invalid, default values
+                      will be used. This might change in the future and you
+                      shouldn't rely on it. Otherwise incorrect syntax causes
+                      Privoxy to exit.
+
+                      Use the show-url-info CGI page to verify that your
+                      forward settings do what you thought the do.
                     
                   
                 
-              
-            
-          
-        
-        
-          
-            8.5.17. forward-override
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Change the forwarding settings based on User-Agent or
-                  request origin
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Overrules the forward directives in the configuration file.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Multi-value.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  
-                    
-                      "forward ." to use a direct
-                      connection without any additional proxies.
-                    
-                  
-                  
-                    
-                      "forward 127.0.0.1:8123" to
-                      use the HTTP proxy listening at 127.0.0.1 port 8123.
-                    
-                  
-                  
-                    
-                      "forward-socks4a 127.0.0.1:9050
-                      ." to use the socks4a proxy listening at
-                      127.0.0.1 port 9050. Replace "forward-socks4a" with "forward-socks4" to use a socks4
-                      connection (with local DNS resolution) instead, use
-                      "forward-socks5" for socks5
-                      connections (with remote DNS resolution).
-                    
-                  
-                  
-                    
-                      "forward-socks4a 127.0.0.1:9050
-                      proxy.example.org:8000" to use the socks4a proxy
-                      listening at 127.0.0.1 port 9050 to reach the HTTP
-                      proxy listening at proxy.example.org port 8000. Replace
-                      "forward-socks4a" with "forward-socks4" to use a socks4
-                      connection (with local DNS resolution) instead, use
-                      "forward-socks5" for socks5
-                      connections (with remote DNS resolution).
-                    
-                  
-                
-              
-              
-                Notes:
-              
-              
-                
-                  This action takes parameters similar to the forward directives in the
-                  configuration file, but without the URL pattern. It can be
-                  used as replacement, but normally it's only used in cases
-                  where matching based on the request URL isn't sufficient.
-                
-                
-                  
-                    
-                      
-                    
-                    
-                      
-                    
-                  
-                        Warning
-                      

-                        
-                          Please read the description for the forward directives
-                          before using this action. Forwarding to the wrong
-                          people will reduce your privacy and increase the
-                          chances of man-in-the-middle attacks.
-                        
-                        
-                          If the ports are missing or invalid, default values
-                          will be used. This might change in the future and
-                          you shouldn't rely on it. Otherwise incorrect
-                          syntax causes Privoxy to exit.
-                        
-                        
-                          Use the show-url-info CGI page to verify that
-                          your forward settings do what you thought the do.
-                        
-                      
-                
-              
-              
-                Example usage:
-              
-              
-                
-                
-                
-                  
-                    
-                  
-                
-+              
+            
+
+            Example usage:
+
+            
+              
+                
+                  
-                  
-                
+                     # Always use direct connections for requests previously tagged as
 # "User-Agent: fetch libfetch/2.0" and make sure
 # resuming downloads continues to work.
@@ -3208,193 +2743,162 @@ problem-host.example.com
 }
 TAG:^User-Agent: fetch libfetch/2\.0$
 
-
-                    
-              
-            
-          
-        
-        
-          
-            8.5.18.
-            handle-as-empty-document
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Mark URLs that should be replaced by empty documents if they get
-                  blocked
-                
-              
-              
-                Effect:
-              
-              
-                
-                  This action alone doesn't do anything noticeable. It just
-                  marks URLs. If the block action also
-                  applies, the presence or absence of this mark
-                  decides whether an HTML "BLOCKED" page, or an empty document will be
-                  sent to the client as a substitute for the blocked content.
-                  The empty document isn't literally empty,
-                  but actually contains a single space.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Boolean.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  N/A
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Some browsers complain about syntax errors if JavaScript
-                  documents are blocked with Privoxy's default HTML page; this
-                  option can be used to silence them. And of course this
-                  action can also be used to eliminate the Privoxy BLOCKED message in frames.
-                
-                
-                  The content type for the empty document can be specified
-                  with content-type-overwrite{},
-                  but usually this isn't necessary.
-                
-              
-              
-                Example usage:
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
--# Block all documents on example.org that end with ".js",
-# but send an empty document instead of the usual HTML message.
-{+block{Blocked JavaScript} +handle-as-empty-document}
-example.org/.*\.js$
+
+                  
+            
+          
+        
+      
+
+      
+        8.5.18. handle-as-empty-document
+
+        
+          
+            Typical use:
+
+            
+              Mark URLs that should be replaced by empty documents
+              if they get
+              blocked
+            
+
+            Effect:
+
+            
+              This action alone doesn't do anything noticeable. It just
+              marks URLs. If the block action also applies, the presence or
+              absence of this mark decides whether an HTML "BLOCKED" page, or an empty document will be
+              sent to the client as a substitute for the blocked content. The
+              empty document isn't
+              literally empty, but actually contains a single space.
+            
+
+            Type:
+
+            
+              Boolean.
+            
+
+            Parameter:
+
+            
+              N/A
+            
+
+            Notes:
+
+            
+              Some browsers complain about syntax errors if JavaScript
+              documents are blocked with Privoxy's default HTML page; this option
+              can be used to silence them. And of course this action can also
+              be used to eliminate the Privoxy BLOCKED message in frames.
+
+              The content type for the empty document can be specified
+              with content-type-overwrite{},
+              but usually this isn't necessary.
+            
+
+            Example usage:
+
+            
+              
+                
+                  
+                
+              
+                    +# Block all documents on example.org that end with ".js",
+# but send an empty document instead of the usual HTML message.
+{+block{Blocked JavaScript} +handle-as-empty-document}
+example.org/.*\.js$
+
+
+                  
+            
+          
+        
+      
+
+      
+        8.5.19. handle-as-image
+
+        
+          
+            Typical use:
+
+            
+              Mark URLs as belonging to images (so they'll be replaced by
+              images if they do get
+              blocked, rather than HTML pages)
+            
+
+            Effect:
+
+            
+              This action alone doesn't do anything noticeable. It just
+              marks URLs as images. If the block action also applies, the presence or
+              absence of this mark decides whether an HTML "blocked" page, or a replacement image (as
+              determined by the set-image-blocker
+              action) will be sent to the client as a substitute for the
+              blocked content.
+            
+
+            Type:
+
+            
+              Boolean.
+            
+
+            Parameter:
 
-
-                    
-              
-            
-          
-        
-        
-          
-            8.5.19. handle-as-image
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Mark URLs as belonging to images (so they'll be replaced by
-                  images if they
-                  do get blocked, rather than HTML pages)
-                
-              
-              
-                Effect:
-              
-              
-                
-                  This action alone doesn't do anything noticeable. It just
-                  marks URLs as images. If the block action also
-                  applies, the presence or absence of this mark
-                  decides whether an HTML "blocked" page, or a replacement image (as
-                  determined by the set-image-blocker
-                  action) will be sent to the client as a substitute for the
-                  blocked content.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Boolean.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  N/A
-                
-              
-              
-                Notes:
-              
-              
-                
-                  The below generic example section is actually part of default.action. It marks all URLs
-                  with well-known image file name extensions as images and
-                  should be left intact.
-                
-                
-                  Users will probably only want to use the handle-as-image
-                  action in conjunction with block, to block sources
-                  of banners, whose URLs don't reflect the file type, like in
-                  the second example section.
-                
-                
-                  Note that you cannot treat HTML pages as images in most
-                  cases. For instance, (in-line) ad frames require an HTML
-                  page to be sent, or they won't display properly. Forcing
-                  handle-as-image in this situation
-                  will not replace the ad frame with an image, but lead to
-                  error messages.
-                
-              
-              
-                Example usage (sections):
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+            
+              N/A
+            
+
+            Notes:
+
+            
+              The below generic example section is actually part of
+              default.action. It marks all URLs
+              with well-known image file name extensions as images and should
+              be left intact.
+
+              Users will probably only want to use the handle-as-image
+              action in conjunction with block, to block sources of
+              banners, whose URLs don't reflect the file type, like in the
+              second example section.
+
+              Note that you cannot treat HTML pages as images in most
+              cases. For instance, (in-line) ad frames require an HTML page
+              to be sent, or they won't display properly. Forcing handle-as-image in this situation will not
+              replace the ad frame with an image, but lead to error
+              messages.
+            
+
+            Example usage (sections):
+
+            
+              
+                
+                  
-                  
-                
+                     # Generic image extensions:
 #
 {+handle-as-image}
@@ -3406,847 +2910,710 @@ example.org/.*\.js$
 {+block{Nasty banners.} +handle-as-image}
 nasty-banner-server.example.com/junk.cgi\?output=trash
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.20. hide-accept-language
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Pretend to use different language settings.
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Deletes or replaces the "Accept-Language:" HTTP header in client
-                  requests.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  Keyword: "block", or any user
-                  defined value.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Faking the browser's language settings can be useful to
-                  make a foreign User-Agent set with hide-user-agent
-                  more believable.
-                
-                
-                  However some sites with content in different languages
-                  check the "Accept-Language:" to
-                  decide which one to take by default. Sometimes it isn't
-                  possible to later switch to another language without
-                  changing the "Accept-Language:"
-                  header first.
-                
-                
-                  Therefore it's a good idea to either only change the "Accept-Language:" header to languages
-                  you understand, or to languages that aren't wide spread.
-                
-                
-                  Before setting the "Accept-Language:" header to a rare
-                  language, you should consider that it helps to make your
-                  requests unique and thus easier to trace. If you don't plan
-                  to change this header frequently, you should stick to a
-                  common language.
-                
-              
-              
-                Example usage (section):
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        8.5.20. hide-accept-language
+
+        
+          
+            Typical use:
+
+            
+              Pretend to use different language settings.
+            
+
+            Effect:
+
+            
+              Deletes or replaces the "Accept-Language:" HTTP header in client
+              requests.
+            
+
+            Type:
+
+            
+              Parameterized.
+            
+
+            Parameter:
+
+            
+              Keyword: "block", or any user
+              defined value.
+            
+
+            Notes:
+
+            
+              Faking the browser's language settings can be useful to make
+              a foreign User-Agent set with hide-user-agent
+              more believable.
+
+              However some sites with content in different languages check
+              the "Accept-Language:" to decide
+              which one to take by default. Sometimes it isn't possible to
+              later switch to another language without changing the
+              "Accept-Language:" header first.
+
+              Therefore it's a good idea to either only change the
+              "Accept-Language:" header to
+              languages you understand, or to languages that aren't wide
+              spread.
+
+              Before setting the "Accept-Language:" header to a rare language,
+              you should consider that it helps to make your requests unique
+              and thus easier to trace. If you don't plan to change this
+              header frequently, you should stick to a common language.
+            
+
+            Example usage (section):
+
+            
+              
+                
+                  
-                  
-                
+                     # Pretend to use Canadian language settings.
 {+hide-accept-language{en-ca} \
 +hide-user-agent{Mozilla/5.0 (X11; U; OpenBSD i386; en-CA; rv:1.8.0.4) Gecko/20060628 Firefox/1.5.0.4} \
 }
 /
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.21.
-            hide-content-disposition
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Prevent download menus for content you prefer to view
-                  inside the browser.
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Deletes or replaces the "Content-Disposition:" HTTP header set by
-                  some servers.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  Keyword: "block", or any user
-                  defined value.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Some servers set the "Content-Disposition:" HTTP header for
-                  documents they assume you want to save locally before
-                  viewing them. The "Content-Disposition:" header contains the
-                  file name the browser is supposed to use by default.
-                
-                
-                  In most browsers that understand this header, it makes it
-                  impossible to just view the document, without
-                  downloading it first, even if it's just a simple text file
-                  or an image.
-                
-                
-                  Removing the "Content-Disposition:" header helps to
-                  prevent this annoyance, but some browsers additionally
-                  check the "Content-Type:"
-                  header, before they decide if they can display a document
-                  without saving it first. In these cases, you have to change
-                  this header as well, before the browser stops displaying
-                  download menus.
-                
-                
-                  It is also possible to change the server's file name
-                  suggestion to another one, but in most cases it isn't worth
-                  the time to set it up.
-                
-                
-                  This action will probably be removed in the future, use
-                  server-header filters instead.
-                
-              
-              
-                Example usage:
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        8.5.21. hide-content-disposition
+
+        
+          
+            Typical use:
+
+            
+              Prevent download menus for content you prefer to view inside
+              the browser.
+            
+
+            Effect:
+
+            
+              Deletes or replaces the "Content-Disposition:" HTTP header set by some
+              servers.
+            
+
+            Type:
+
+            
+              Parameterized.
+            
+
+            Parameter:
+
+            
+              Keyword: "block", or any user
+              defined value.
+            
+
+            Notes:
+
+            
+              Some servers set the "Content-Disposition:" HTTP header for documents
+              they assume you want to save locally before viewing them. The
+              "Content-Disposition:" header
+              contains the file name the browser is supposed to use by
+              default.
+
+              In most browsers that understand this header, it makes it
+              impossible to just
+              view the document, without downloading it first, even if
+              it's just a simple text file or an image.
+
+              Removing the "Content-Disposition:" header helps to prevent
+              this annoyance, but some browsers additionally check the
+              "Content-Type:" header, before they
+              decide if they can display a document without saving it first.
+              In these cases, you have to change this header as well, before
+              the browser stops displaying download menus.
+
+              It is also possible to change the server's file name
+              suggestion to another one, but in most cases it isn't worth the
+              time to set it up.
+
+              This action will probably be removed in the future, use
+              server-header filters instead.
+            
+
+            Example usage:
+
+            
+              
+                
+                  
-                  
-                
+                     # Disarm the download link in Sourceforge's patch tracker
 { -filter \
  +content-type-overwrite{text/plain}\
  +hide-content-disposition{block} }
  .sourceforge.net/tracker/download\.php
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.22.
-            hide-if-modified-since
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Prevent yet another way to track the user's steps between
-                  sessions.
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Deletes the "If-Modified-Since:"
-                  HTTP client header or modifies its value.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  Keyword: "block", or a user
-                  defined value that specifies a range of hours.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Removing this header is useful for filter testing, where
-                  you want to force a real reload instead of getting status
-                  code "304", which would cause
-                  the browser to use a cached copy of the page.
-                
-                
-                  Instead of removing the header, hide-if-modified-since can also add or
-                  subtract a random amount of time to/from the header's
-                  value. You specify a range of minutes where the random
-                  factor should be chosen from and Privoxy does the rest. A negative
-                  value means subtracting, a positive value adding.
-                
-                
-                  Randomizing the value of the "If-Modified-Since:" makes it less likely
-                  that the server can use the time as a cookie replacement,
-                  but you will run into caching problems if the random range
-                  is too high.
-                
-                
-                  It is a good idea to only use a small negative value and
-                  let overwrite-last-modified
-                  handle the greater changes.
-                
-                
-                  It is also recommended to use this action together with crunch-if-none-match,
-                  otherwise it's more or less pointless.
-                
-              
-              
-                Example usage (section):
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        8.5.22. hide-if-modified-since
+
+        
+          
+            Typical use:
+
+            
+              Prevent yet another way to track the user's steps between
+              sessions.
+            
+
+            Effect:
+
+            
+              Deletes the "If-Modified-Since:"
+              HTTP client header or modifies its value.
+            
+
+            Type:
+
+            
+              Parameterized.
+            
+
+            Parameter:
+
+            
+              Keyword: "block", or a user
+              defined value that specifies a range of hours.
+            
+
+            Notes:
+
+            
+              Removing this header is useful for filter testing, where you
+              want to force a real reload instead of getting status code
+              "304", which would cause the browser
+              to use a cached copy of the page.
+
+              Instead of removing the header, hide-if-modified-since can also add or subtract
+              a random amount of time to/from the header's value. You specify
+              a range of minutes where the random factor should be chosen
+              from and Privoxy does the
+              rest. A negative value means subtracting, a positive value
+              adding.
+
+              Randomizing the value of the "If-Modified-Since:" makes it less likely that
+              the server can use the time as a cookie replacement, but you
+              will run into caching problems if the random range is too
+              high.
+
+              It is a good idea to only use a small negative value and let
+              overwrite-last-modified
+              handle the greater changes.
+
+              It is also recommended to use this action together with
+              crunch-if-none-match,
+              otherwise it's more or less pointless.
+            
+
+            Example usage (section):
+
+            
+              
+                
+                  
-                  
-                
+                     # Let the browser revalidate but make tracking based on the time less likely.
 {+hide-if-modified-since{-60} \
  +overwrite-last-modified{randomize} \
  +crunch-if-none-match}
 /
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.23. hide-from-header
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Keep your (old and ill) browser from telling web servers
-                  your email address
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Deletes any existing "From:"
-                  HTTP header, or replaces it with the specified string.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  Keyword: "block", or any user
-                  defined value.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  The keyword "block" will
-                  completely remove the header (not to be confused with the
-                  block action).
-                
-                
-                  Alternately, you can specify any value you prefer to be
-                  sent to the web server. If you do, it is a matter of
-                  fairness not to use any address that is actually used by a
-                  real person.
-                
-                
-                  This action is rarely needed, as modern web browsers don't
-                  send "From:" headers anymore.
-                
-              
-              
-                Example usage:
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        8.5.23. hide-from-header
+
+        
+          
+            Typical use:
+
+            
+              Keep your (old and ill) browser from telling web servers
+              your email address
+            
+
+            Effect:
+
+            
+              Deletes any existing "From:" HTTP
+              header, or replaces it with the specified string.
+            
+
+            Type:
+
+            
+              Parameterized.
+            
+
+            Parameter:
+
+            
+              Keyword: "block", or any user
+              defined value.
+            
+
+            Notes:
+
+            
+              The keyword "block" will
+              completely remove the header (not to be confused with the
+              block action).
+
+              Alternately, you can specify any value you prefer to be sent
+              to the web server. If you do, it is a matter of fairness not to
+              use any address that is actually used by a real person.
+
+              This action is rarely needed, as modern web browsers don't
+              send "From:" headers anymore.
+            
+
+            Example usage:
+
+            
+              
+                
+                  
-                  
-                
+                     +hide-from-header{block}
 
-                    
-                or
-                
-                  
-                    
+                
+              
-+                  or
+
+              
+                
+                  
-                  
-                
+                     +hide-from-header{spam-me-senseless@sittingduck.example.com}
 
-                    
-              
-            
-          
+                  
+            
+          
+        
+      
+
+      
+        8.5.24.
+        hide-referrer

+
+        
+          
+            Typical use:
+
+            
+              Conceal which link you followed to get to a particular
+              site
+            
+
+            Effect:
+
+            
+              Deletes the "Referer:" (sic) HTTP
+              header from the client request, or replaces it with a forged
+              one.
+            
+
+            Type:
+
+            
+              Parameterized.
+            
+
+            Parameter:
+
+            
+              
+                
+                  "conditional-block" to delete
+                  the header completely if the host has changed.
+                
+
+                
+                  "conditional-forge" to forge
+                  the header if the host has changed.
+                
+
+                
+                  "block" to delete the header
+                  unconditionally.
+                
+
+                
+                  "forge" to pretend to be
+                  coming from the homepage of the server we are talking
+                  to.
+                
+
+                
+                  Any other string to set a user defined referrer.
+                
+              
+            
+
+            Notes:
+
+            
+              conditional-block is the only
+              parameter, that isn't easily detected in the server's log file.
+              If it blocks the referrer, the request will look like the
+              visitor used a bookmark or typed in the address directly.
+
+              Leaving the referrer unmodified for requests on the same
+              host allows the server owner to see the visitor's "click path", but in most cases she could also
+              get that information by comparing other parts of the log file:
+              for example the User-Agent if it isn't a very common one, or
+              the user's IP address if it doesn't change between different
+              requests.
+
+              Always blocking the referrer, or using a custom one, can
+              lead to failures on servers that check the referrer before they
+              answer any requests, in an attempt to prevent their content
+              from being embedded or linked to elsewhere.
+
+              Both conditional-block and
+              forge will work with referrer checks,
+              as long as content and valid referring page are on the same
+              host. Most of the time that's the case.
+
+              hide-referer is an alternate
+              spelling of hide-referrer and the two
+              can be can be freely substituted with each other. ("referrer" is the correct English spelling,
+              however the HTTP specification has a bug - it requires it to be
+              spelled as "referer".)
+            
+
+            Example usage:
+
+            
+              
+                
+                  
+                
+              
+                    ++hide-referrer{forge}
+
+                  or
+
+              
+                
+                  
+                
+              
+                    ++hide-referrer{http://www.yahoo.com/}
+
+                  
+            
+          
         
-        
-          
-            8.5.24. hide-referrer
-          
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Conceal which link you followed to get to a particular site
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Deletes the "Referer:" (sic)
-                  HTTP header from the client request, or replaces it with a
-                  forged one.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  
-                    
-                      "conditional-block" to
-                      delete the header completely if the host has changed.
-                    
-                  
-                  
-                    
-                      "conditional-forge" to forge
-                      the header if the host has changed.
-                    
-                  
-                  
-                    
-                      "block" to delete the header
-                      unconditionally.
-                    
-                  
-                  
-                    
-                      "forge" to pretend to be
-                      coming from the homepage of the server we are talking
-                      to.
-                    
-                  
-                  
-                    
-                      Any other string to set a user defined referrer.
-                    
-                  
-                
-              
-              
-                Notes:
-              
-              
-                
-                  conditional-block is the only
-                  parameter, that isn't easily detected in the server's log
-                  file. If it blocks the referrer, the request will look like
-                  the visitor used a bookmark or typed in the address
-                  directly.
-                
-                
-                  Leaving the referrer unmodified for requests on the same
-                  host allows the server owner to see the visitor's "click path", but in most cases she
-                  could also get that information by comparing other parts of
-                  the log file: for example the User-Agent if it isn't a very
-                  common one, or the user's IP address if it doesn't change
-                  between different requests.
-                
-                
-                  Always blocking the referrer, or using a custom one, can
-                  lead to failures on servers that check the referrer before
-                  they answer any requests, in an attempt to prevent their
-                  content from being embedded or linked to elsewhere.
-                
-                
-                  Both conditional-block and forge will work with referrer checks,
-                  as long as content and valid referring page are on the same
-                  host. Most of the time that's the case.
-                
-                
-                  hide-referer is an alternate
-                  spelling of hide-referrer and the
-                  two can be can be freely substituted with each other.
-                  ("referrer" is the correct
-                  English spelling, however the HTTP specification has a bug
-                  - it requires it to be spelled as "referer".)
-                
-              
-              
-                Example usage:
-              
-              
-                
-                
-                
+      
+
+      
+        8.5.25. hide-user-agent
+
+        
+          
+            Typical use:
+
+            
+              Try to conceal your type of browser and client operating
+              system
+            
+
+            Effect:
+
+            
+              Replaces the value of the "User-Agent:" HTTP header in client requests
+              with the specified value.
+            
+
+            Type:
+
+            
+              Parameterized.
+            
+
+            Parameter:
+
+            
+              Any user-defined string.
+            
+
+            Notes:
+
+            
+              
+                

-                    
+                    
-                
                   
--+hide-referrer{forge}
-
-                    Warning
                   
-                or
-                
+
                   
-                    
--+hide-referrer{http://www.yahoo.com/}
-
+                    
+                      This can lead to problems on web sites that depend
+                      on looking at this header in order to customize their
+                      content for different browsers (which, by the way, is
+                      NOT the right
+                      thing to do: good web sites work
+                      browser-independently).
                     
                   
                 
-              
-            
-          
-        
-        
-          
-            8.5.25. hide-user-agent
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Try to conceal your type of browser and client operating
-                  system
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Replaces the value of the "User-Agent:" HTTP header in client requests
-                  with the specified value.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  Any user-defined string.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  
-                    
-                      
-                    
-                    
-                      
-                    
-                  
-                        Warning
-                      

-                        
-                          This can lead to problems on web sites that depend
-                          on looking at this header in order to customize
-                          their content for different browsers (which, by the
-                          way, is NOT the right thing to do:
-                          good web sites work browser-independently).
-                        
-                      
-                
-                
-                  Using this action in multi-user setups or wherever
-                  different types of browsers will access the same Privoxy is not recommended.
-                  In single-user, single-browser setups, you might use it to
-                  delete your OS version information from the headers,
-                  because it is an invitation to exploit known bugs for your
-                  OS. It is also occasionally useful to forge this in order
-                  to access sites that won't let you in otherwise (though
-                  there may be a good reason in some cases).
-                
-                
-                  More information on known user-agent strings can be found
-                  at http://www.user-agents.org/ and http://en.wikipedia.org/wiki/User_agent.
-                
-              
-              
-                Example usage:
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+              
+
+              Using this action in multi-user setups or wherever different
+              types of browsers will access the same Privoxy is not recommended. In single-user,
+              single-browser setups, you might use it to delete your OS
+              version information from the headers, because it is an
+              invitation to exploit known bugs for your OS. It is also
+              occasionally useful to forge this in order to access sites that
+              won't let you in otherwise (though there may be a good reason
+              in some cases).
+
+              More information on known user-agent strings can be found at
+              http://www.user-agents.org/ and http://en.wikipedia.org/wiki/User_agent.
+            
+
+            Example usage:
+
+            
+              
+                
+                  
-                  
-                
+                     +hide-user-agent{Netscape 6.1 (X11; I; Linux 2.4.18 i686)}
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.26. limit-connect
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Prevent abuse of Privoxy
-                  as a TCP proxy relay or disable SSL for untrusted sites
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Specifies to which ports HTTP CONNECT requests are
-                  allowable.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  A comma-separated list of ports or port ranges (the latter
-                  using dashes, with the minimum defaulting to 0 and the
-                  maximum to 65K).
-                
-              
-              
-                Notes:
-              
-              
-                
-                  By default, i.e. if no limit-connect action applies, Privoxy allows HTTP CONNECT requests
-                  to all ports. Use limit-connect if
-                  fine-grained control is desired for some or all
-                  destinations.
-                
-                
-                  The CONNECT methods exists in HTTP to allow access to
-                  secure websites ("https://"
-                  URLs) through proxies. It works very simply: the proxy
-                  connects to the server on the specified port, and then
-                  short-circuits its connections to the client and to the
-                  remote server. This means CONNECT-enabled proxies can be
-                  used as TCP relays very easily.
-                
-                
-                  Privoxy relays HTTPS
-                  traffic without seeing the decoded content. Websites can
-                  leverage this limitation to circumvent Privoxy's filters. By specifying an
-                  invalid port range you can disable HTTPS entirely.
-                
-              
-              
-                Example usages:
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        8.5.26.
+        limit-connect
+
+        
+          
+            Typical use:
+
+            
+              Prevent abuse of Privoxy as
+              a TCP proxy relay or disable SSL for untrusted sites
+            
+
+            Effect:
+
+            
+              Specifies to which ports HTTP CONNECT requests are
+              allowable.
+            
+
+            Type:
+
+            
+              Parameterized.
+            
+
+            Parameter:
+
+            
+              A comma-separated list of ports or port ranges (the latter
+              using dashes, with the minimum defaulting to 0 and the maximum
+              to 65K).
+            
+
+            Notes:
+
+            
+              By default, i.e. if no limit-connect action applies, Privoxy allows HTTP CONNECT requests to
+              all ports. Use limit-connect if
+              fine-grained control is desired for some or all
+              destinations.
+
+              The CONNECT methods exists in HTTP to allow access to secure
+              websites ("https://" URLs) through
+              proxies. It works very simply: the proxy connects to the server
+              on the specified port, and then short-circuits its connections
+              to the client and to the remote server. This means
+              CONNECT-enabled proxies can be used as TCP relays very
+              easily.
+
+              Privoxy relays HTTPS
+              traffic without seeing the decoded content. Websites can
+              leverage this limitation to circumvent Privoxy's filters. By specifying an
+              invalid port range you can disable HTTPS entirely.
+            
+
+            Example usages:
+
+            
+              
+                
+                  
-                  
-                
+                     +limit-connect{443}                   # Port 443 is OK.
 +limit-connect{80,443}                # Ports 80 and 443 are OK.
 +limit-connect{-3, 7, 20-100, 500-}   # Ports less than 3, 7, 20 to 100 and above 500 are OK.
 +limit-connect{-}                     # All ports are OK
 +limit-connect{,}                     # No HTTPS/SSL traffic is allowed
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.27. prevent-compression
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Ensure that servers send the content uncompressed, so it
-                  can be passed through filters.
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Removes the Accept-Encoding header which can be used to ask
-                  for compressed transfer.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Boolean.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  N/A
-                
-              
-              
-                Notes:
-              
-              
-                
-                  More and more websites send their content compressed by
-                  default, which is generally a good idea and saves
-                  bandwidth. But the filter and deanimate-gifs
-                  actions need access to the uncompressed data.
-                
-                
-                  When compiled with zlib support (available since Privoxy 3.0.7), content that
-                  should be filtered is decompressed on-the-fly and you don't
-                  have to worry about this action. If you are using an older
-                  Privoxy version, or one
-                  that hasn't been compiled with zlib support, this action
-                  can be used to convince the server to send the content
-                  uncompressed.
-                
-                
-                  Most text-based instances compress very well, the size is
-                  seldom decreased by less than 50%, for markup-heavy
-                  instances like news feeds saving more than 90% of the
-                  original size isn't unusual.
-                
-                
-                  Not using compression will therefore slow down the
-                  transfer, and you should only enable this action if you
-                  really need it. As of Privoxy 3.0.7 it's disabled in all
-                  predefined action settings.
-                
-                
-                  Note that some (rare) ill-configured sites don't handle
-                  requests for uncompressed documents correctly. Broken PHP
-                  applications tend to send an empty document body, some IIS
-                  versions only send the beginning of the content. If you
-                  enable prevent-compression per
-                  default, you might want to add exceptions for those sites.
-                  See the example for how to do that.
-                
-              
-              
-                Example usage (sections):
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        8.5.27. prevent-compression
+
+        
+          
+            Typical use:
+
+            
+              Ensure that servers send the content uncompressed, so it can
+              be passed through filters.
+            
+
+            Effect:
+
+            
+              Removes the Accept-Encoding header which can be used to ask
+              for compressed transfer.
+            
+
+            Type:
+
+            
+              Boolean.
+            
+
+            Parameter:
+
+            
+              N/A
+            
+
+            Notes:
+
+            
+              More and more websites send their content compressed by
+              default, which is generally a good idea and saves bandwidth.
+              But the filter and deanimate-gifs
+              actions need access to the uncompressed data.
+
+              When compiled with zlib support (available since
+              Privoxy 3.0.7), content that
+              should be filtered is decompressed on-the-fly and you don't
+              have to worry about this action. If you are using an older
+              Privoxy version, or one that
+              hasn't been compiled with zlib support, this action can be used
+              to convince the server to send the content uncompressed.
+
+              Most text-based instances compress very well, the size is
+              seldom decreased by less than 50%, for markup-heavy instances
+              like news feeds saving more than 90% of the original size isn't
+              unusual.
+
+              Not using compression will therefore slow down the transfer,
+              and you should only enable this action if you really need it.
+              As of Privoxy 3.0.7 it's
+              disabled in all predefined action settings.
+
+              Note that some (rare) ill-configured sites don't handle
+              requests for uncompressed documents correctly. Broken PHP
+              applications tend to send an empty document body, some IIS
+              versions only send the beginning of the content. If you enable
+              prevent-compression per default, you
+              might want to add exceptions for those sites. See the example
+              for how to do that.
+            
+
+            Example usage (sections):
+
+            
+              
+                
+                  
-                  
-                
+                     # Selectively turn off compression, and enable a filter
 #
 { +filter{tiny-textforms} +prevent-compression }
@@ -4265,316 +3632,268 @@ nasty-banner-server.example.com/junk.cgi\?output=trash
 { -prevent-compression }
 .compusa.com/
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.28.
-            overwrite-last-modified
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Prevent yet another way to track the user's steps between
-                  sessions.
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Deletes the "Last-Modified:"
-                  HTTP server header or modifies its value.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  One of the keywords: "block",
-                  "reset-to-request-time" and
-                  "randomize"
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Removing the "Last-Modified:"
-                  header is useful for filter testing, where you want to
-                  force a real reload instead of getting status code "304", which would cause the browser
-                  to reuse the old version of the page.
-                
-                
-                  The "randomize" option
-                  overwrites the value of the "Last-Modified:" header with a randomly
-                  chosen time between the original value and the current
-                  time. In theory the server could send each document with a
-                  different "Last-Modified:"
-                  header to track visits without using cookies. "Randomize" makes it impossible and the
-                  browser can still revalidate cached documents.
-                
-                
-                  "reset-to-request-time"
-                  overwrites the value of the "Last-Modified:" header with the current
-                  time. You could use this option together with hide-if-modified-since
-                  to further customize your random range.
-                
-                
-                  The preferred parameter here is "randomize". It is safe to use, as long as
-                  the time settings are more or less correct. If the server
-                  sets the "Last-Modified:" header
-                  to the time of the request, the random range becomes zero
-                  and the value stays the same. Therefore you should later
-                  randomize it a second time with hided-if-modified-since,
-                  just to be sure.
-                
-                
-                  It is also recommended to use this action together with crunch-if-none-match.
-                
-              
-              
-                Example usage:
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        8.5.28. overwrite-last-modified
+
+        
+          
+            Typical use:
+
+            
+              Prevent yet another way to track the user's steps between
+              sessions.
+            
+
+            Effect:
+
+            
+              Deletes the "Last-Modified:" HTTP
+              server header or modifies its value.
+            
+
+            Type:
+
+            
+              Parameterized.
+            
+
+            Parameter:
+
+            
+              One of the keywords: "block",
+              "reset-to-request-time" and
+              "randomize"
+            
+
+            Notes:
+
+            
+              Removing the "Last-Modified:"
+              header is useful for filter testing, where you want to force a
+              real reload instead of getting status code "304", which would cause the browser to reuse
+              the old version of the page.
+
+              The "randomize" option overwrites
+              the value of the "Last-Modified:"
+              header with a randomly chosen time between the original value
+              and the current time. In theory the server could send each
+              document with a different "Last-Modified:" header to track visits without
+              using cookies. "Randomize" makes it
+              impossible and the browser can still revalidate cached
+              documents.
+
+              "reset-to-request-time"
+              overwrites the value of the "Last-Modified:" header with the current time.
+              You could use this option together with hide-if-modified-since
+              to further customize your random range.
+
+              The preferred parameter here is "randomize". It is safe to use, as long as the
+              time settings are more or less correct. If the server sets the
+              "Last-Modified:" header to the time
+              of the request, the random range becomes zero and the value
+              stays the same. Therefore you should later randomize it a
+              second time with hided-if-modified-since,
+              just to be sure.
+
+              It is also recommended to use this action together with
+              crunch-if-none-match.
+            
+
+            Example usage:
+
+            
+              
+                
+                  
-                  
-                
+                     # Let the browser revalidate without being tracked across sessions
 { +hide-if-modified-since{-60} \
  +overwrite-last-modified{randomize} \
  +crunch-if-none-match}
 /
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.29. redirect
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Redirect requests to other sites.
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Convinces the browser that the requested document has been
-                  moved to another location and the browser should get it
-                  from there.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  An absolute URL or a single pcrs command.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Requests to which this action applies are answered with a
-                  HTTP redirect to URLs of your choosing. The new URL is
-                  either provided as parameter, or derived by applying a
-                  single pcrs command to the original URL.
-                
-                
-                  This action will be ignored if you use it together with block. It can be
-                  combined with fast-redirects{check-decoded-url}
-                  to redirect to a decoded version of a rewritten URL.
-                
-                
-                  Use this action carefully, make sure not to create
-                  redirection loops and be aware that using your own
-                  redirects might make it possible to fingerprint your
-                  requests.
-                
-                
-                  In case of problems with your redirects, or simply to watch
-                  them working, enable debug
-                  128.
-                
-              
-              
-                Example usages:
-              
-              
-                
-                
-                
-                  
-                    
-                  
-                
-+      
+
+      
+        8.5.29.
+        redirect
+
+        
+          
+            Typical use:
+
+            
+              Redirect requests to other sites.
+            
+
+            Effect:
+
+            
+              Convinces the browser that the requested document has been
+              moved to another location and the browser should get it from
+              there.
+            
+
+            Type:
+
+            
+              Parameterized
+            
+
+            Parameter:
+
+            
+              An absolute URL or a single pcrs command.
+            
+
+            Notes:
+
+            
+              Requests to which this action applies are answered with a
+              HTTP redirect to URLs of your choosing. The new URL is either
+              provided as parameter, or derived by applying a single pcrs
+              command to the original URL.
+
+              This action will be ignored if you use it together with
+              block. It can be combined
+              with fast-redirects{check-decoded-url}
+              to redirect to a decoded version of a rewritten URL.
+
+              Use this action carefully, make sure not to create
+              redirection loops and be aware that using your own redirects
+              might make it possible to fingerprint your requests.
+
+              In case of problems with your redirects, or simply to watch
+              them working, enable debug
+              128.
+            
+
+            Example usages:
+
+            
+              
+                
+                  
+                
+              
+                     # Replace example.com's style sheet with another one
 { +redirect{http://localhost/css-replacements/example.com.css} }
  example.com/stylesheet\.css
 
-# Create a short, easy to remember nickname for a favorite site
-# (relies on the browser accept and forward invalid URLs to Privoxy)
-{ +redirect{http://www.privoxy.org/user-manual/actions-file.html} }
- a
+# Create a short, easy to remember nickname for a favorite site
+# (relies on the browser accept and forward invalid URLs to Privoxy)
+{ +redirect{http://www.privoxy.org/user-manual/actions-file.html} }
+ a
+
+# Always use the expanded view for Undeadly.org articles
+# (Note the $ at the end of the URL pattern to make sure
+# the request for the rewritten URL isn't redirected as well)
+{+redirect{s@$@&mode=expanded@}}
+undeadly.org/cgi\?action=article&sid=\d*$
+
+# Redirect Google search requests to MSN
+{+redirect{s@^http://[^/]*/search\?q=([^&]*).*@http://search.msn.com/results.aspx?q=$1@}}
+.google.com/search
+
+# Redirect MSN search requests to Yahoo
+{+redirect{s@^http://[^/]*/results\.aspx\?q=([^&]*).*@http://search.yahoo.com/search?p=$1@}}
+search.msn.com//results\.aspx\?q=
+
+# Redirect remote requests for this manual
+# to the local version delivered by Privoxy
+{+redirect{s@^http://www@http://config@}}
+www.privoxy.org/user-manual/
+
+                  
+            
+          
+        
+      
+
+      
+        8.5.30. server-header-filter
+
+        
+          
+            Typical use:
+
+            
+              Rewrite or remove single server headers.
+            
+
+            Effect:
+
+            
+              All server headers to which this action applies are filtered
+              on-the-fly through the specified regular expression based
+              substitutions.
+            
+
+            Type:
+
+            
+              Parameterized.
+            
+
+            Parameter:
+
+            
+              The name of a server-header filter, as defined in one of the
+              filter files.
+            
+
+            Notes:
+
+            
+              Server-header filters are applied to each header on its own,
+              not to all at once. This makes it easier to diagnose problems,
+              but on the downside you can't write filters that only change
+              header x if header y's value is z. You can do that by using
+              tags though.
 
-# Always use the expanded view for Undeadly.org articles
-# (Note the $ at the end of the URL pattern to make sure
-# the request for the rewritten URL isn't redirected as well)
-{+redirect{s@$@&mode=expanded@}}
-undeadly.org/cgi\?action=article&sid=\d*$
+              Server-header filters are executed after the other header
+              actions have finished and use their output as input.
 
-# Redirect Google search requests to MSN
-{+redirect{s@^http://[^/]*/search\?q=([^&]*).*@http://search.msn.com/results.aspx?q=$1@}}
-.google.com/search
+              Please refer to the filter file
+              chapter to learn which server-header filters are available
+              by default, and how to create your own.
+            
 
-# Redirect MSN search requests to Yahoo
-{+redirect{s@^http://[^/]*/results\.aspx\?q=([^&]*).*@http://search.yahoo.com/search?p=$1@}}
-search.msn.com//results\.aspx\?q=
+            Example usage (section):
 
-# Redirect remote requests for this manual
-# to the local version delivered by Privoxy
-{+redirect{s@^http://www@http://config@}}
-www.privoxy.org/user-manual/
-
-                    
-              
-            
-          
-        
-        
-          
-            8.5.30. server-header-filter
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Rewrite or remove single server headers.
-                
-              
-              
-                Effect:
-              
-              
-                
-                  All server headers to which this action applies are
-                  filtered on-the-fly through the specified regular
-                  expression based substitutions.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  The name of a server-header filter, as defined in one of
-                  the filter files.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Server-header filters are applied to each header on its
-                  own, not to all at once. This makes it easier to diagnose
-                  problems, but on the downside you can't write filters that
-                  only change header x if header y's value is z. You can do
-                  that by using tags though.
-                
-                
-                  Server-header filters are executed after the other header
-                  actions have finished and use their output as input.
-                
-                
-                  Please refer to the filter file
-                  chapter to learn which server-header filters are
-                  available by default, and how to create your own.
-                
-              
-              
-                Example usage (section):
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+            
+              
+                
+                  
-                  
-                
+                     {+server-header-filter{html-to-xml}}
 example.org/xml-instance-that-is-delivered-as-html
 
@@ -4582,451 +3901,381 @@ example.org/xml-instance-that-is-delivered-as-html
 example.org/instance-that-is-delivered-as-xml-but-is-not
 
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.31. server-header-tagger
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Enable or disable filters based on the Content-Type header.
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Server headers to which this action applies are filtered
-                  on-the-fly through the specified regular expression based
-                  substitutions, the result is used as tag.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  The name of a server-header tagger, as defined in one of
-                  the filter files.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Server-header taggers are applied to each header on its
-                  own, and as the header isn't modified, each tagger "sees" the original.
-                
-                
-                  Server-header taggers are executed before all other header
-                  actions that modify server headers. Their tags can be used
-                  to control all of the other server-header actions, the
-                  content filters and the crunch actions (redirect and block).
-                
-                
-                  Obviously crunching based on tags created by server-header
-                  taggers doesn't prevent the request from showing up in the
-                  server's log file.
-                
-              
-              
-                Example usage (section):
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        8.5.31. server-header-tagger
+
+        
+          
+            Typical use:
+
+            
+              Enable or disable filters based on the Content-Type
+              header.
+            
+
+            Effect:
+
+            
+              Server headers to which this action applies are filtered
+              on-the-fly through the specified regular expression based
+              substitutions, the result is used as tag.
+            
+
+            Type:
+
+            
+              Parameterized.
+            
+
+            Parameter:
+
+            
+              The name of a server-header tagger, as defined in one of the
+              filter files.
+            
+
+            Notes:
+
+            
+              Server-header taggers are applied to each header on its own,
+              and as the header isn't modified, each tagger "sees" the original.
+
+              Server-header taggers are executed before all other header
+              actions that modify server headers. Their tags can be used to
+              control all of the other server-header actions, the content
+              filters and the crunch actions (redirect and block).
+
+              Obviously crunching based on tags created by server-header
+              taggers doesn't prevent the request from showing up in the
+              server's log file.
+            
+
+            Example usage (section):
+
+            
+              
+                
+                  
-                  
-                
+                     # Tag every request with the content type declared by the server
 {+server-header-tagger{content-type}}
 /
 
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.32. session-cookies-only
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Allow only temporary "session"
-                  cookies (for the current browser session only).
-                
-              
-              
-                Effect:
-              
-              
-                
-                  Deletes the "expires" field from
-                  "Set-Cookie:" server headers.
-                  Most browsers will not store such cookies permanently and
-                  forget them in between sessions.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Boolean.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  N/A
-                
-              
-              
-                Notes:
-              
-              
-                
-                  This is less strict than crunch-incoming-cookies
-                  / crunch-outgoing-cookies
-                  and allows you to browse websites that insist or rely on
-                  setting cookies, without compromising your privacy too
-                  badly.
-                
-                
-                  Most browsers will not permanently store cookies that have
-                  been processed by session-cookies-only and will forget about
-                  them between sessions. This makes profiling cookies
-                  useless, but won't break sites which require cookies so
-                  that you can log in for transactions. This is generally
-                  turned on for all sites, and is the recommended setting.
-                
-                
-                  It makes no
-                  sense at all to use session-cookies-only together with crunch-incoming-cookies
-                  or crunch-outgoing-cookies.
-                  If you do, cookies will be plainly killed.
-                
-                
-                  Note that it is up to the browser how it handles such
-                  cookies without an "expires"
-                  field. If you use an exotic browser, you might want to try
-                  it out to be sure.
-                
-                
-                  This setting also has no effect on cookies that may have
-                  been stored previously by the browser before starting Privoxy. These would have to be
-                  removed manually.
-                
-                
-                  Privoxy also uses the content-cookies
-                  filter to block some types of cookies. Content cookies
-                  are not effected by session-cookies-only.
-                
-              
-              
-                Example usage:
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        8.5.32. session-cookies-only
+
+        
+          
+            Typical use:
+
+            
+              Allow only temporary "session"
+              cookies (for the current browser session only).
+            
+
+            Effect:
+
+            
+              Deletes the "expires" field from
+              "Set-Cookie:" server headers. Most
+              browsers will not store such cookies permanently and forget
+              them in between sessions.
+            
+
+            Type:
+
+            
+              Boolean.
+            
+
+            Parameter:
+
+            
+              N/A
+            
+
+            Notes:
+
+            
+              This is less strict than crunch-incoming-cookies
+              / crunch-outgoing-cookies
+              and allows you to browse websites that insist or rely on
+              setting cookies, without compromising your privacy too
+              badly.
+
+              Most browsers will not permanently store cookies that have
+              been processed by session-cookies-only
+              and will forget about them between sessions. This makes
+              profiling cookies useless, but won't break sites which require
+              cookies so that you can log in for transactions. This is
+              generally turned on for all sites, and is the recommended
+              setting.
+
+              It makes no sense at
+              all to use session-cookies-only
+              together with crunch-incoming-cookies
+              or crunch-outgoing-cookies.
+              If you do, cookies will be plainly killed.
+
+              Note that it is up to the browser how it handles such
+              cookies without an "expires" field.
+              If you use an exotic browser, you might want to try it out to
+              be sure.
+
+              This setting also has no effect on cookies that may have
+              been stored previously by the browser before starting
+              Privoxy. These would have to
+              be removed manually.
+
+              Privoxy also uses the
+              content-cookies
+              filter to block some types of cookies. Content cookies are
+              not effected by session-cookies-only.
+            
+
+            Example usage:
+
+            
+              
+                
+                  
-                  
-                
+                     +session-cookies-only
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            8.5.33. set-image-blocker
-          
-          
-            
-              
-                Typical use:
-              
-              
-                
-                  Choose the replacement for blocked images
-                
-              
-              
-                Effect:
-              
-              
-                
-                  This action alone doesn't do anything noticeable. If both block and handle-as-image
-                  also
-                  apply, i.e. if the request is to be blocked as an image,
-                  then
-                  the parameter of this action decides what will be sent as a
-                  replacement.
-                
-              
-              
-                Type:
-              
-              
-                
-                  Parameterized.
-                
-              
-              
-                Parameter:
-              
-              
-                
-                  
-                    
-                      "pattern" to send a built-in
-                      checkerboard pattern image. The image is visually
-                      decent, scales very well, and makes it obvious where
-                      banners were busted.
-                    
-                  
-                  
-                    
-                      "blank" to send a built-in
-                      transparent image. This makes banners disappear
-                      completely, but makes it hard to detect where Privoxy has blocked images
-                      on a given page and complicates troubleshooting if
-                      Privoxy has blocked
-                      innocent images, like navigation icons.
-                    
-                  
-                  
-                    
-                      "target-url" to send a
-                      redirect to target-url. You can redirect
-                      to any image anywhere, even in your local filesystem
-                      via "file:///" URL. (But
-                      note that not all browsers support redirecting to a
-                      local file system).
-                    
-                    
-                      A good application of redirects is to use special Privoxy-built-in URLs, which
-                      send the built-in images, as target-url. This has the same
-                      visual effect as specifying "blank" or "pattern" in the first place, but
-                      enables your browser to cache the replacement image,
-                      instead of requesting it over and over again.
-                    
-                  
-                
-              
-              
-                Notes:
-              
-              
-                
-                  The URLs for the built-in images are "http://config.privoxy.org/send-banner?type=type", where type is either "blank" or "pattern".
-                
-                
-                  There is a third (advanced) type, called "auto". It is NOT to be used in set-image-blocker, but meant for use from filters. Auto will select the
-                  type of image that would have applied to the referring
-                  page, had it been an image.
-                
-              
-              
-                Example usage:
-              
-              
-                
-                  Built-in pattern:
-                
-                
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        8.5.33. set-image-blocker
+
+        
+          
+            Typical use:
+
+            
+              Choose the replacement for blocked images
+            
+
+            Effect:
+
+            
+              This action alone doesn't do anything noticeable. If
+              both block
+              and handle-as-image
+              also apply, i.e. if
+              the request is to be blocked as an image, then the parameter of this action
+              decides what will be sent as a replacement.
+            
+
+            Type:
+
+            
+              Parameterized.
+            
+
+            Parameter:
+
+            
+              
+                
+                  "pattern" to send a built-in
+                  checkerboard pattern image. The image is visually decent,
+                  scales very well, and makes it obvious where banners were
+                  busted.
+                
+
+                
+                  "blank" to send a built-in
+                  transparent image. This makes banners disappear completely,
+                  but makes it hard to detect where Privoxy has blocked images on a given
+                  page and complicates troubleshooting if Privoxy has blocked innocent images,
+                  like navigation icons.
+                
+
+                
+                  "target-url" to send a redirect
+                  to target-url. You can
+                  redirect to any image anywhere, even in your local
+                  filesystem via "file:///" URL.
+                  (But note that not all browsers support redirecting to a
+                  local file system).
+
+                  A good application of redirects is to use special
+                  Privoxy-built-in URLs,
+                  which send the built-in images, as target-url. This has the same visual
+                  effect as specifying "blank" or
+                  "pattern" in the first place,
+                  but enables your browser to cache the replacement image,
+                  instead of requesting it over and over again.
+                
+              
+            
+
+            Notes:
+
+            
+              The URLs for the built-in images are "http://config.privoxy.org/send-banner?type=type", where type is either "blank" or "pattern".
+
+              There is a third (advanced) type, called "auto". It is NOT to be used in set-image-blocker, but meant for use from
+              filters. Auto will select the
+              type of image that would have applied to the referring page,
+              had it been an image.
+            
+
+            Example usage:
+
+            
+              Built-in pattern:
+
+              
+                
+                  
-                  
-                
+                     +set-image-blocker{pattern}
 
-                    
+                  
 
-                
-                  Redirect to the BSD daemon:
-                
-                
-                
-                
-                  
-                    
+                
+              
-+              Redirect to the BSD daemon:
+
+              
+                
+                  
-                  
-                
+                     +set-image-blocker{http://www.freebsd.org/gifs/dae_up3.gif}
 
-                    
+                  
 
-                
-                  Redirect to the built-in pattern for better caching:
-                
-                
-                
-                
-                  
-                    
+                
+              
-+              Redirect to the built-in pattern for better caching:
+
+              
+                
+                  
-                  
-                
+                     +set-image-blocker{http://config.privoxy.org/send-banner?type=pattern}
 
-                    
-              
-            
-          
-        
-        
-          
-            8.5.34. Summary
-          
-          
-            Note that many of these actions have the potential to cause a
-            page to misbehave, possibly even not to display at all. There are
-            many ways a site designer may choose to design his site, and what
-            HTTP header content, and other criteria, he may depend on. There
-            is no way to have hard and fast rules for all sites. See the Appendix for a brief example
-            on troubleshooting actions.
-          
+                  
+            
+          
         
       
-      
-        
-          8.6. Aliases
-        
-        
-          Custom "actions", known to Privoxy as "aliases", can be defined by combining other
-          actions. These can in turn be invoked just like the built-in
-          actions. Currently, an alias name can contain any character except
-          space, tab, "=", "{" and "}", but we strongly recommend
-          that you only use "a" to "z", "0" to "9", "+", and "-". Alias names are not case sensitive, and
-          are not required to start with a "+" or
-          "-" sign, since they are merely
-          textually expanded.
-        
-        
-          Aliases can be used throughout the actions file, but they must be defined in a special
-          section at the top of the file! And there can only be
-          one such section per actions file. Each actions file may have its
-          own alias section, and the aliases defined in it are only visible
-          within that file.
-        
-        
-          There are two main reasons to use aliases: One is to save typing
-          for frequently used combinations of actions, the other one is a
-          gain in flexibility: If you decide once how you want to handle
-          shops by defining an alias called "shop", you can later change your policy on shops in
-          one place,
-          and your changes will take effect everywhere in the actions file
-          where the "shop" alias is used. Calling
-          aliases by their purpose also makes your actions files more
-          readable.
-        
-        
-          Currently, there is one big drawback to using aliases, though:
-          Privoxy's built-in web-based
-          action file editor honors aliases when reading the actions files,
-          but it expands them before writing. So the effects of your aliases
-          are of course preserved, but the aliases themselves are lost when
-          you edit sections that use aliases with it.
-        
-        
-          Now let's define some aliases...
-        
-        
-        
-        
-          
-            
+        
+      
-+
+      
+        8.5.34.
+        Summary
+
+        Note that many of these actions have the potential to cause a page
+        to misbehave, possibly even not to display at all. There are many
+        ways a site designer may choose to design his site, and what HTTP
+        header content, and other criteria, he may depend on. There is no way
+        to have hard and fast rules for all sites. See the Appendix for a brief example on
+        troubleshooting actions.
+      
+    
+
+    
+      8.6. Aliases
+
+      Custom "actions", known to Privoxy as "aliases",
+      can be defined by combining other actions. These can in turn be invoked
+      just like the built-in actions. Currently, an alias name can contain
+      any character except space, tab, "=",
+      "{" and "}", but
+      we strongly recommend that
+      you only use "a" to "z", "0" to "9", "+", and "-". Alias names are not case sensitive, and are not
+      required to start with a "+" or "-" sign, since they are merely textually expanded.
+
+      Aliases can be used throughout the actions file, but they
+      must be defined in a special section
+      at the top of the file! And there can only be one such section
+      per actions file. Each actions file may have its own alias section, and
+      the aliases defined in it are only visible within that file.
+
+      There are two main reasons to use aliases: One is to save typing for
+      frequently used combinations of actions, the other one is a gain in
+      flexibility: If you decide once how you want to handle shops by
+      defining an alias called "shop", you can
+      later change your policy on shops in one place, and your changes will take
+      effect everywhere in the actions file where the "shop" alias is used. Calling aliases by their purpose
+      also makes your actions files more readable.
+
+      Currently, there is one big drawback to using aliases, though:
+      Privoxy's built-in web-based action
+      file editor honors aliases when reading the actions files, but it
+      expands them before writing. So the effects of your aliases are of
+      course preserved, but the aliases themselves are lost when you edit
+      sections that use aliases with it.
+
+      Now let's define some aliases...
+
+      
+        
+          
-          
-        
+              # Useful custom aliases we can use later.
  #
  # Note the (required!) section header line and that this section
@@ -5038,11 +4287,9 @@ example.org/instance-that-is-delivered-as-xml-but-is-not
  # (Note that some already use other aliases!)
  #
  +crunch-all-cookies = +crunch-incoming-cookies +crunch-outgoing-cookies
+"actions-file.html#CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies +crunch-outgoing-cookies
  -crunch-all-cookies = -crunch-incoming-cookies -crunch-outgoing-cookies
+"actions-file.html#CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies -crunch-outgoing-cookies
  +block-as-image      = +block{Blocked image.} +handle-as-image
  allow-all-cookies   = -crunch-all-cookies -session-cookies-only -crunch-outgoing-cookies
  c0 = +crunch-all-cookies
  c1 = -crunch-all-cookies
 
-            
+          
 
-        
-          ...and put them to use. These sections would appear in the lower
-          part of an actions file and define exceptions to the default
-          actions (as specified further up for the "/" pattern):
-        
-        
-        
-        
-          
-            
+        
+      
-+      ...and put them to use. These sections would appear in the lower
+      part of an actions file and define exceptions to the default actions
+      (as specified further up for the "/"
+      pattern):
+
+      
+        
+          
-          
-        
+              # These sites are either very complex or very keen on
  # user data and require minimal interference to work:
  #
@@ -5104,71 +4348,62 @@ href="actions-file.html#CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies
   .dabs.com
   .overclockers.co.uk
 
-            
+          
 
-        
-          Aliases like "shop" and "fragile" are typically used for "problem" sites that require more than one action to
-          be disabled in order to function properly.
-        
-      
-      
-        
-          8.7. Actions Files Tutorial
-        
-        
-          The above chapters have shown which
-          actions files there are and how they are organized, how actions
-          are specified and applied to URLs, how patterns work, and how to
-          define and use aliases.
-          Now, let's look at an example match-all.action, default.action and user.action file and see how all these pieces come
-          together:
-        
-        
-          
-            8.7.1. match-all.action
-          
-          
-            Remember all actions
-            are disabled when matching starts, so we have to
-            explicitly enable the ones we want.
-          
-          
-            While the match-all.action file only
-            contains a single section, it is probably the most important one.
-            It has only one pattern, "/", but this pattern matches all URLs. Therefore,
-            the set of actions used in this "default" section will be applied to all requests as a start.
-            It can be partly or wholly overridden by other actions files like
-            default.action and user.action, but it will still be largely
-            responsible for your overall browsing experience.
-          
-          
-            Again, at the start of matching, all actions are disabled, so
-            there is no need to disable any actions here. (Remember: a "+" preceding the action name enables the
-            action, a "-" disables!). Also note
-            how this long line has been made more readable by splitting it
-            into multiple lines with line continuation.
-          
-          
-          
-          
-            
-              
+          
+        
-+      Aliases like "shop" and "fragile" are typically used for "problem" sites that require more than one action to be
+      disabled in order to function properly.
+    
+
+    
+      8.7. Actions
+      Files Tutorial
+
+      The above chapters have shown which
+      actions files there are and how they are organized, how actions are
+      specified and applied to URLs, how patterns work, and how to define
+      and use aliases. Now, let's
+      look at an example match-all.action,
+      default.action and user.action file and see how all these pieces come
+      together:
+
+      
+        8.7.1.
+        match-all.action
+
+        Remember all actions are
+        disabled when matching starts, so we have to explicitly enable
+        the ones we want.
+
+        While the match-all.action file only
+        contains a single section, it is probably the most important one. It
+        has only one pattern, "/", but this pattern matches all URLs. Therefore, the
+        set of actions used in this "default"
+        section will be applied to all
+        requests as a start. It can be partly or wholly overridden by
+        other actions files like default.action and
+        user.action, but it will still be largely
+        responsible for your overall browsing experience.
+
+        Again, at the start of matching, all actions are disabled, so
+        there is no need to disable any actions here. (Remember: a
+        "+" preceding the action name enables the
+        action, a "-" disables!). Also note how
+        this long line has been made more readable by splitting it into
+        multiple lines with line continuation.
+
+        
+          
+            
-            
-          
+               { \
  +change-x-forwarded-for{block} \
@@ -5177,64 +4412,56 @@ href="actions-file.html#CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies
 "actions-file.html#SET-IMAGE-BLOCKER">set-image-blocker{pattern} \
 }
 / # Match all URLs
+
 
-              
+            
 
-          
-            The default behavior is now set.
-          
-        
-        
-          
-            8.7.2. default.action
-          
-          
-            If you aren't a developer, there's no need for you to edit the
-            default.action file. It is maintained
-            by the Privoxy developers and if
-            you disagree with some of the sections, you should overrule them
-            in your user.action.
-          
-          
-            Understanding the default.action file
-            can help you with your user.action,
-            though.
-          
-          
-            The first section in this file is a special section for internal
-            use that prevents older Privoxy
-            versions from reading the file:
-          
-          
-          
-          
-            
-              
+          
+        
-+        The default behavior is now set.
+      
+
+      
+        8.7.2.
+        default.action
+
+        If you aren't a developer, there's no need for you to edit the
+        default.action file. It is maintained by
+        the Privoxy developers and if you
+        disagree with some of the sections, you should overrule them in your
+        user.action.
+
+        Understanding the default.action file
+        can help you with your user.action,
+        though.
+
+        The first section in this file is a special section for internal
+        use that prevents older Privoxy
+        versions from reading the file:
+
+        
+          
+            
-            
-          
+               ##########################################################################
 # Settings -- Don't change! For internal Privoxy use ONLY.
 ##########################################################################
 {{settings}}
 for-privoxy-version=3.0.11
 
-              
+            
 
-          
-            After that comes the (optional) alias section. We'll use the
-            example section from the above chapter on aliases, that also
-            explains why and how aliases are used:
-          
-          
-          
-          
-            
-              
+          
+        
-+        After that comes the (optional) alias section. We'll use the
+        example section from the above chapter on aliases, that also
+        explains why and how aliases are used:
+
+        
+          
+            
-            
-          
+               ##########################################################################
 # Aliases
 ##########################################################################
@@ -5244,11 +4471,9 @@ for-privoxy-version=3.0.11
  # (Note that some already use other aliases!)
  #
  +crunch-all-cookies = +crunch-incoming-cookies +crunch-outgoing-cookies
+"actions-file.html#CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies +crunch-outgoing-cookies
  -crunch-all-cookies = -crunch-incoming-cookies -crunch-outgoing-cookies
+"actions-file.html#CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies -crunch-outgoing-cookies
  +block-as-image      = +block{Blocked image.} +handle-as-image
  mercy-for-cookies   = -crunch-all-cookies -session-cookies-only -crunch-outgoing-cookies
 "actions-file.html#HIDE-REFERER">hide-referrer
  shop        = -crunch-all-cookies -filter{all-popups}
-
-              
+
+            
 
-          
-            The first of our specialized sections is concerned with "fragile" sites, i.e. sites that require
-            minimum interference, because they are either very complex or
-            very keen on tracking you (and have mechanisms in place that make
-            them unusable for people who avoid being tracked). We will simply
-            use our pre-defined fragile alias
-            instead of stating the list of actions explicitly:
-          
-          
-          
-          
-            
-              
+          
+        
-+        The first of our specialized sections is concerned with
+        "fragile" sites, i.e. sites that require
+        minimum interference, because they are either very complex or very
+        keen on tracking you (and have mechanisms in place that make them
+        unusable for people who avoid being tracked). We will simply use our
+        pre-defined fragile alias instead of stating
+        the list of actions explicitly:
+
+        
+          
+            
-            
-          
+               ##########################################################################
 # Exceptions for sites that'll break under the default action set:
 ##########################################################################
@@ -5294,21 +4516,18 @@ href="actions-file.html#CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies
 .windowsupdate.microsoft.com
 mail.google.com
 
-              
+            
 
-          
-            Shopping sites are not as fragile, but they typically require
-            cookies to log in, and pop-up windows for shopping carts or item
-            details. Again, we'll use a pre-defined alias:
-          
-          
-          
-          
-            
-              
+          
+        
-+        Shopping sites are not as fragile, but they typically require
+        cookies to log in, and pop-up windows for shopping carts or item
+        details. Again, we'll use a pre-defined alias:
+
+        
+          
+            
-            
-          
+               # Shopping sites:
 #
 { shop }
@@ -5317,23 +4536,20 @@ mail.google.com
 .jungle.com
 .scan.co.uk
 
-              
+            
 
-          
-            The fast-redirects
-            action, which may have been enabled in match-all.action, breaks some sites. So disable
-            it for popular sites where we know it misbehaves:
-          
-          
-          
-          
-            
-              
+          
+        
-+        The fast-redirects action,
+        which may have been enabled in match-all.action, breaks some sites. So disable it
+        for popular sites where we know it misbehaves:
+
+        
+          
+            
-            
-          
+               { -fast-redirects }
 login.yahoo.com
 edit.*.yahoo.com
@@ -5342,30 +4558,26 @@ edit.*.yahoo.com
 .altavista.com/trans.*urltext=http
 .nytimes.com
 
-              
+            
 
-          
-            It is important that Privoxy
-            knows which URLs belong to images, so that if they are to be
-            blocked, a substitute image can be sent, rather than an HTML
-            page. Contacting the remote site to find out is not an option,
-            since it would destroy the loading time advantage of banner
-            blocking, and it would feed the advertisers information about
-            you. We can mark any URL as an image with the handle-as-image
-            action, and marking all URLs that end in a known image file
-            extension is a good start:
-          
-          
-          
-          
-            
-              
+          
+        
-+        It is important that Privoxy
+        knows which URLs belong to images, so that if they are to be blocked, a substitute
+        image can be sent, rather than an HTML page. Contacting the remote
+        site to find out is not an option, since it would destroy the loading
+        time advantage of banner blocking, and it would feed the advertisers
+        information about you. We can mark any URL as an image with the
+        handle-as-image action,
+        and marking all URLs that end in a known image file extension is a
+        good start:
+
+        
+          
+            
-            
-          
+               ##########################################################################
 # Images:
 ##########################################################################
@@ -5376,34 +4588,30 @@ edit.*.yahoo.com
 { +handle-as-image }
 /.*\.(gif|jpe?g|png|bmp|ico)$
 
-              
+            
 
-          
-            And then there are known banner sources. They often use scripts
-            to generate the banners, so it won't be visible from the URL that
-            the request is for an image. Hence we block them and mark them as images
-            in one go, with the help of our +block-as-image alias defined above. (We could of
-            course just as well use +block +handle-as-image
-            here.) Remember that the type of the replacement image is chosen
-            by the set-image-blocker
-            action. Since all URLs have matched the default section with its
-            +set-image-blocker{pattern}
-            action before, it still applies and needn't be repeated:
-          
-          
-          
-          
-            
-              
+          
+        
-+        And then there are known banner sources. They often use scripts to
+        generate the banners, so it won't be visible from the URL that the
+        request is for an image. Hence we block them and mark them as images in one go, with
+        the help of our +block-as-image alias
+        defined above. (We could of course just as well use +block +handle-as-image here.)
+        Remember that the type of the replacement image is chosen by the
+        set-image-blocker
+        action. Since all URLs have matched the default section with its
+        +set-image-blocker{pattern}
+        action before, it still applies and needn't be repeated:
+
+        
+          
+            
-            
-          
+               # Known ad generators:
 #
 { +block-as-image }
@@ -5415,37 +4623,32 @@ ar.atwola.com
 bs*.gsanet.com
 .qkimg.net
 
-              
+            
 
-          
-            One of the most important jobs of Privoxy is to block banners. Many of these
-            can be "blocked" by the filter{banners-by-size}
-            action, which we enabled above, and which deletes the references
-            to banner images from the pages while they are loaded, so the
-            browser doesn't request them anymore, and hence they don't need
-            to be blocked here. But this naturally doesn't catch all banners,
-            and some people choose not to use filters, so we need a
-            comprehensive list of patterns for banner URLs here, and apply
-            the block action to them.
-          
-          
-            First comes many generic patterns, which do most of the work, by
-            matching typical domain and path name components of banners. Then
-            comes a list of individual patterns for specific sites, which is
-            omitted here to keep the example short:
-          
-          
-          
-          
-            
-              
+          
+        
-+        One of the most important jobs of Privoxy is to block banners. Many of these can
+        be "blocked" by the filter{banners-by-size} action,
+        which we enabled above, and which deletes the references to banner
+        images from the pages while they are loaded, so the browser doesn't
+        request them anymore, and hence they don't need to be blocked here.
+        But this naturally doesn't catch all banners, and some people choose
+        not to use filters, so we need a comprehensive list of patterns for
+        banner URLs here, and apply the block action to them.
+
+        First comes many generic patterns, which do most of the work, by
+        matching typical domain and path name components of banners. Then
+        comes a list of individual patterns for specific sites, which is
+        omitted here to keep the example short:
+
+        
+          
+            
-            
-          
+               ##########################################################################
 # Block these fine banners:
 ##########################################################################
@@ -5464,55 +4667,47 @@ count*.
 #
 .hitbox.com
 
-              
+            
 
-          
-            It's quite remarkable how many advertisers actually call their
-            banner servers ads.company.com, or call the directory in
-            which the banners are stored simply "banners". So the above generic patterns are
-            surprisingly effective.
-          
-          
-            But being very generic, they necessarily also catch URLs that we
-            don't want to block. The pattern .*ads.
-            e.g. catches "nasty-ads.nasty-corp.com" as
-            intended, but also "downloads.sourcefroge.net" or "adsl.some-provider.net." So here
-            come some well-known exceptions to the +block section above.
-          
-          
-            Note that these are exceptions to exceptions from the default!
-            Consider the URL "downloads.sourcefroge.net": Initially, all
-            actions are deactivated, so it wouldn't get blocked. Then comes
-            the defaults section, which matches the URL, but just deactivates
-            the block action once again. Then
-            it matches .*ads., an exception to the
-            general non-blocking policy, and suddenly +block applies. And now,
-            it'll match .*loads., where -block
-            applies, so (unless it matches again further down) it ends up with no block
-            action applying.
-          
-          
-          
-          
-            
-              
+          
+        
-+        It's quite remarkable how many advertisers actually call their
+        banner servers ads.company.com, or
+        call the directory in which the banners are stored simply
+        "banners". So the above generic patterns
+        are surprisingly effective.
+
+        But being very generic, they necessarily also catch URLs that we
+        don't want to block. The pattern .*ads. e.g.
+        catches "nasty-ads.nasty-corp.com" as intended,
+        but also "downloads.sourcefroge.net" or
+        "adsl.some-provider.net." So here
+        come some well-known exceptions to the +block section above.
+
+        Note that these are exceptions to exceptions from the default!
+        Consider the URL "downloads.sourcefroge.net": Initially, all actions
+        are deactivated, so it wouldn't get blocked. Then comes the defaults
+        section, which matches the URL, but just deactivates the block action
+        once again. Then it matches .*ads., an
+        exception to the general non-blocking policy, and suddenly +block applies.
+        And now, it'll match .*loads., where
+        -block
+        applies, so (unless it matches again further down) it ends up with no
+        block
+        action applying.
+
+        
+          
+            
-            
-          
+               ##########################################################################
 # Save some innocent victims of the above generic block patterns:
 ##########################################################################
@@ -5536,24 +4731,21 @@ ad[ud]*.   # (adult.* and add.*)
 www.globalintersec.com/adv # (adv = advanced)
 www.ugu.com/sui/ugu/adv
 
-              
+            
 
-          
-            Filtering source code can have nasty side effects, so make an
-            exception for our friends at sourceforge.net, and all paths with
-            "cvs" in them. Note that -filter
-            disables all filters in one fell swoop!
-          
-          
-          
-          
-            
-              
+          
+        
-+        Filtering source code can have nasty side effects, so make an
+        exception for our friends at sourceforge.net, and all paths with
+        "cvs" in them. Note that -filter
+        disables all filters in one
+        fell swoop!
+
+        
+          
+            
-            
-          
+               # Don't filter code!
 #
 { -filter }
@@ -5563,65 +4755,55 @@ developer.
 wiki.
 .sourceforge.net
 
-              
+            
 
-          
-            The actual default.action is of course
-            much more comprehensive, but we hope this example made clear how
-            it works.
-          
-        
-        
-          
-            8.7.3. user.action
-          
-          
-            So far we are painting with a broad brush by setting general
-            policies, which would be a reasonable starting point for many
-            people. Now, you might want to be more specific and have
-            customized rules that are more suitable to your personal habits
-            and preferences. These would be for narrowly defined situations
-            like your ISP or your bank, and should be placed in user.action, which is parsed after all other
-            actions files and hence has the last word, over-riding any
-            previously defined actions. user.action
-            is also a safe place for your personal settings,
-            since default.action is actively
-            maintained by the Privoxy
-            developers and you'll probably want to install updated versions
-            from time to time.
-          
-          
-            So let's look at a few examples of things that one might
-            typically do in user.action:
-          
-          
-          
-          
-            
-              
+          
+        
-+        The actual default.action is of course
+        much more comprehensive, but we hope this example made clear how it
+        works.
+      
+
+      
+        8.7.3.
+        user.action
+
+        So far we are painting with a broad brush by setting general
+        policies, which would be a reasonable starting point for many people.
+        Now, you might want to be more specific and have customized rules
+        that are more suitable to your personal habits and preferences. These
+        would be for narrowly defined situations like your ISP or your bank,
+        and should be placed in user.action, which
+        is parsed after all other actions files and hence has the last word,
+        over-riding any previously defined actions. user.action is also a safe place for your personal settings,
+        since default.action is actively maintained
+        by the Privoxy developers and you'll
+        probably want to install updated versions from time to time.
+
+        So let's look at a few examples of things that one might typically
+        do in user.action:
+
+        
+          
+            
-            
-          
+               # My user.action file. <fred@example.com>
 
-              
+            
 
-          
-            As aliases are local to
-            the actions file that they are defined in, you can't use the ones
-            from default.action, unless you repeat
-            them here:
-          
-          
-          
-          
-            
-              
+          
+        
-+        As aliases are local to
+        the actions file that they are defined in, you can't use the ones
+        from default.action, unless you repeat them
+        here:
+
+        
+          
+            
-            
-          
+               # Aliases are local to the file they are defined in.
 # (Re-)define aliases for this file:
 #
@@ -5650,65 +4832,54 @@ allow-ads   = -block -filter{banners-by-size} -filter{banners-by-link}
 # Alias for specific file types that are text, but might have conflicting
 # MIME types. We want the browser to force these to be text documents.
 handle-as-text = -filter +-content-type-overwrite{text/plain} +-force-text-mode -hide-content-disposition
+"actions-file.html#CONTENT-TYPE-OVERWRITE">content-type-overwrite{text/plain} +-force-text-mode -hide-content-disposition
 
-              
-          

-
-          
-            Say you have accounts on some sites that you visit regularly, and
-            you don't want to have to log in manually each time. So you'd
-            like to allow persistent cookies for these sites. The allow-all-cookies alias defined above does exactly
-            that, i.e. it disables crunching of cookies in any direction, and
-            the processing of cookies to make them only temporary.
-          
-          
-          
-          
-            
-              
+          
+        
-+            
+
+        Say you have accounts on some sites that you visit regularly, and
+        you don't want to have to log in manually each time. So you'd like to
+        allow persistent cookies for these sites. The allow-all-cookies alias defined above does exactly
+        that, i.e. it disables crunching of cookies in any direction, and the
+        processing of cookies to make them only temporary.
+
+        
+          
+            
-            
-          
+               { allow-all-cookies }
  sourceforge.net
  .yahoo.com
  .msdn.microsoft.com
  .redhat.com
 
-              
+            
 
-          
-            Your bank is allergic to some filter, but you don't know which,
-            so you disable them all:
-          
-          
-          
-          
-            
-              
+          
+        
-+        Your bank is allergic to some filter, but you don't know which, so
+        you disable them all:
+
+        
+          
+            
-            
-          
+               { -filter }
  .your-home-banking-site.com
 
-              
+            
 
-          
-            Some file types you may not want to filter for various reasons:
-          
-          
-          
-          
-            
-              
+          
+        
-+        Some file types you may not want to filter for various
+        reasons:
+
+        
+          
+            
-            
-          
+               # Technical documentation is likely to contain strings that might
 # erroneously get altered by the JavaScript-oriented filters:
 #
@@ -5720,215 +4891,196 @@ handle-as-text = -filter +-
-              
+            
 
-          
-            Example of a simple block
-            action. Say you've seen an ad on your favourite page on
-            example.com that you want to get rid of. You have right-clicked
-            the image, selected "copy image
-            location" and pasted the URL below while removing the
-            leading http://, into a { +block{} }
-            section. Note that { +handle-as-image }
-            need not be specified, since all URLs ending in .gif will be tagged as images by the general rules
-            as set in default.action anyway:
-          
-          
-          
-          
-            
-              
+          
+        
-+        Example of a simple block
+        action. Say you've seen an ad on your favourite page on example.com
+        that you want to get rid of. You have right-clicked the image,
+        selected "copy image location" and pasted
+        the URL below while removing the leading http://, into a { +block{} } section. Note that {
+        +handle-as-image } need not be specified, since all URLs ending
+        in .gif will be tagged as images by the
+        general rules as set in default.action anyway:
+
+        
+          
+            
-            
-          
+               { +block{Nasty ads.} }
  www.example.com/nasty-ads/sponsor\.gif
  another.example.net/more/junk/here/
 
-              
+            
 
-          
-            The URLs of dynamically generated banners, especially from large
-            banner farms, often don't use the well-known image file name
-            extensions, which makes it impossible for Privoxy to guess the file type just by
-            looking at the URL. You can use the +block-as-image alias defined above for these
-            cases. Note that objects which match this rule but then turn out
-            NOT to be an image are typically rendered as a "broken image" icon by the browser. Use
-            cautiously.
-          
-          
-          
-          
-            
-              
+          
+        
-+        The URLs of dynamically generated banners, especially from large
+        banner farms, often don't use the well-known image file name
+        extensions, which makes it impossible for Privoxy to guess the file type just by looking
+        at the URL. You can use the +block-as-image
+        alias defined above for these cases. Note that objects which match
+        this rule but then turn out NOT to be an image are typically rendered
+        as a "broken image" icon by the browser.
+        Use cautiously.
+
+        
+          
+            
-            
-          
+               { +block-as-image }
  .doubleclick.net
  .fastclick.net
  /Realmedia/ads/
  ar.atwola.com/
 
-              
+            
 
-          
-            Now you noticed that the default configuration breaks Forbes
-            Magazine, but you were too lazy to find out which action is the
-            culprit, and you were again too lazy to give feedback, so you just used the fragile alias on the site, and -- whoa! -- it worked. The
-            fragile aliases disables those actions
-            that are most likely to break a site. Also, good for testing
-            purposes to see if it is Privoxy
-            that is causing the problem or not. We later find other regular
-            sites that misbehave, and add those to our personalized list of
-            troublemakers:
-          
-          
-            
-              
+          
+        
-+        Now you noticed that the default configuration breaks Forbes
+        Magazine, but you were too lazy to find out which action is the
+        culprit, and you were again too lazy to give feedback, so you just used the fragile alias on the site, and -- whoa! -- it worked. The fragile aliases disables those actions that are most
+        likely to break a site. Also, good for testing purposes to see if it
+        is Privoxy that is causing the
+        problem or not. We later find other regular sites that misbehave, and
+        add those to our personalized list of troublemakers:
+
+        
+          
+            
-            
-          
+               { fragile }
  .forbes.com
  webmail.example.com
  .mybank.com
 
-              
+            
 
-          
-            You like the "fun" text replacements
-            in default.filter, but it is disabled
-            in the distributed actions file. So you'd like to turn it on in
-            your private, update-safe config, once and for all:
-          
-          
-            
-              
+          
+        
-+        You like the "fun" text replacements in
+        default.filter, but it is disabled in the
+        distributed actions file. So you'd like to turn it on in your
+        private, update-safe config, once and for all:
+
+        
+          
+            
-            
-          
+               { +filter{fun} }
  / # For ALL sites!
 
-              
+            
 
-          
-            Note that the above is not really a good idea: There are
-            exceptions to the filters in default.action for things that really shouldn't
-            be filtered, like code on CVS->Web interfaces. Since user.action has the last word, these
-            exceptions won't be valid for the "fun" filtering specified here.
-          
-          
-            You might also worry about how your favourite free websites are
-            funded, and find that they rely on displaying banner
-            advertisements to survive. So you might want to specifically
-            allow banners for those sites that you feel provide value to you:
-          
-          
-            
-              
+          
+        
-+        Note that the above is not really a good idea: There are
+        exceptions to the filters in default.action
+        for things that really shouldn't be filtered, like code on
+        CVS->Web interfaces. Since user.action
+        has the last word, these exceptions won't be valid for the
+        "fun" filtering specified here.
+
+        You might also worry about how your favourite free websites are
+        funded, and find that they rely on displaying banner advertisements
+        to survive. So you might want to specifically allow banners for those
+        sites that you feel provide value to you:
+
+        
+          
+            
-            
-          
+               { allow-ads }
  .sourceforge.net
  .slashdot.org
  .osdn.net
 
-              
+            
 
-          
-            Note that allow-ads has been aliased to
-            -block, -filter{banners-by-size},
-            and -filter{banners-by-link}
-            above.
-          
-          
-            Invoke another alias here to force an over-ride of the MIME type
-            application/x-sh which typically would
-            open a download type dialog. In my case, I want to look at the
-            shell script, and then I can save it should I choose to.
-          
-          
-            
-              
+          
+        
-+        Note that allow-ads has been aliased to
+        -block, -filter{banners-by-size},
+        and -filter{banners-by-link}
+        above.
+
+        Invoke another alias here to force an over-ride of the MIME type
+        application/x-sh which typically would open
+        a download type dialog. In my case, I want to look at the shell
+        script, and then I can save it should I choose to.
+
+        
+          
+            
-            
-          
+               { handle-as-text }
  /.*\.sh$
 
-              
+            
 
-          
-            user.action is generally the best place
-            to define exceptions and additions to the default policies of default.action. Some actions are safe to
-            have their default policies set here though. So let's set a
-            default policy to have a "blank" image
-            as opposed to the checkerboard pattern for ALL sites. "/" of course matches all URL paths and patterns:
-          
-          
-            
-              
+          
+        
-+        user.action is generally the best place
+        to define exceptions and additions to the default policies of
+        default.action. Some actions are safe to
+        have their default policies set here though. So let's set a default
+        policy to have a "blank" image as opposed
+        to the checkerboard pattern for ALL sites. "/" of course matches all URL paths and patterns:
+
+        
+          
+            
-            
-          
+               { +set-image-blocker{blank} }
 / # ALL sites
 
-              
-        
+            
       
     
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-            Prev
-          
-            Home
-          
-            Next
-          

-            The Main Configuration File
-          
-             
-          
-            Filter Files
-          
-    
-  
-
+  
+
+  
+    
+
+    
+      
+        
+
+        
 
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
The Main Configuration
+        File   Filter Files
+  
+
+
diff --git a/doc/webserver/user-manual/appendix.html b/doc/webserver/user-manual/appendix.html
index 8bc96bc4..45b706d0 100644
--- a/doc/webserver/user-manual/appendix.html
+++ b/doc/webserver/user-manual/appendix.html
@@ -1,766 +1,661 @@
-
+
+
 
-  
-    
-    
-      Appendix
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
-        
-          
-          
-          
-        
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  table.c3 {background-color: #E0E0E0}
+  span.c2 {font-style: italic}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    

-            Privoxy 3.0.18 User Manual
-          

-            Prev
-          
-          
-             
-          
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy 3.0.18 User Manual
Prev  
+    
+  
+
+  
+    14. Appendix
+
+    
+      14.1. Regular
+      Expressions
+
+      Privoxy uses Perl-style
+      "regular expressions" in its actions files and filter file, through the PCRE and PCRS libraries.
+
+      If you are reading this, you probably don't understand what
+      "regular expressions" are, or what they can
+      do. So this will be a very brief introduction only. A full explanation
+      would require a book ;-)
+
+      Regular expressions provide a language to describe patterns that can
+      be run against strings of characters (letter, numbers, etc), to see if
+      they match the string or not. The patterns are themselves (sometimes
+      complex) strings of literal characters, combined with wild-cards, and
+      other special characters, called meta-characters. The "meta-characters" have special meanings and are used to
+      build complex patterns to be matched against. Perl Compatible Regular
+      Expressions are an especially convenient "dialect" of the regular expression language.
+
+      To make a simple analogy, we do something similar when we use
+      wild-card characters when listing files with the dir command in DOS. *.* matches
+      all filenames. The "special" character here
+      is the asterisk which matches any and all characters. We can be more
+      specific and use ? to match just individual
+      characters. So "dir file?.text" would match
+      "file1.txt", "file2.txt", etc. We are pattern matching, using a
+      similar technique to "regular
+      expressions"!
+
+      Regular expressions do essentially the same thing, but are much,
+      much more powerful. There are many more "special
+      characters" and ways of building complex patterns however. Let's
+      look at a few of the common ones, and then some examples:
+
+      
+        
+          
+            
+          
+        
+      . - Matches any
+            single character, e.g. "a",
+            "A", "4",
+            ":", or "@".
+
+      
+        
+          
+            
+          
+        
+      ? - The preceding
+            character or expression is matched ZERO or ONE times.
+            Either/or.
+
+      
+        
+          
+            
+          
+        
+      + - The preceding
+            character or expression is matched ONE or MORE times.
+
+      
+        
+          
+            
+          
+        
+      * - The preceding
+            character or expression is matched ZERO or MORE times.
+
+      
+        
+          
+            
+          
+        
+      \ - The
+            "escape" character denotes that the
+            following character should be taken literally. This is used where
+            one of the special characters (e.g. ".") needs to be taken literally and not as a
+            special meta-character. Example: "example\.com", makes sure the period is
+            recognized only as a period (and not expanded to its
+            meta-character meaning of any single character).
+
+      
+        
+          
+            
+          
+        
+      [ ] - Characters
+            enclosed in brackets will be matched if any of the enclosed
+            characters are encountered. For instance, "[0-9]" matches any numeric digit (zero through
+            nine). As an example, we can combine this with "+" to match any digit one of more times:
+            "[0-9]+".
+
+      
+        
+          
+            
+          
+        
+      ( ) - parentheses
+            are used to group a sub-expression, or multiple
+            sub-expressions.
+
+      
+        
+          
+            
+          
+        | - The
+            "bar" character works like an
+            "or" conditional statement. A match is
+            successful if the sub-expression on either side of "|" matches. As an example: "/(this|that) example/" uses grouping and the bar
+            character and would match either "this
+            example" or "that example", and
+            nothing else.
       
-      
+
+      These are just some of the ones you are likely to use when matching
+      URLs with Privoxy, and is a long way
+      from a definitive list. This is enough to get us started with a few
+      simple examples which may be more illuminating:
+
+      /.*/banners/.* - A simple example that uses the
+      common combination of "." and "*" to denote any character, zero or more times. In
+      other words, any string at all. So we start with a literal forward
+      slash, then our regular expression pattern (".*") another literal forward slash, the string
+      "banners", another forward slash, and lastly
+      another ".*". We are building a directory
+      path here. This will match any file with the path that has a directory
+      named "banners" in it. The ".*" matches any characters, and this could conceivably
+      be more forward slashes, so it might expand into a much longer looking
+      path. For example, this could match: "/eye/hate/spammers/banners/annoy_me_please.gif", or
+      just "/banners/annoying.html", or almost an
+      infinite number of other possible combinations, just so it has
+      "banners" in the path somewhere.
+
+      And now something a little more complex:
+
+      /.*/adv((er)?ts?|ertis(ing|ements?))?/ - We have
+      several literal forward slashes again ("/"),
+      so we are building another expression that is a file path statement. We
+      have another ".*", so we are matching
+      against any conceivable sub-path, just so it matches our expression.
+      The only true literal that must
+      match our pattern is adv,
+      together with the forward slashes. What comes after the "adv" string is the interesting part.
+
+      Remember the "?" means the preceding
+      expression (either a literal character or anything grouped with
+      "(...)" in this case) can exist or not,
+      since this means either zero or one match. So "((er)?ts?|ertis(ing|ements?))" is optional, as are the
+      individual sub-expressions: "(er)",
+      "(ing|ements?)", and the "s". The "|" means
+      "or". We have two of those. For instance,
+      "(ing|ements?)", can expand to match either
+      "ing" OR "ements?".
+      What is being done here, is an attempt at matching as many variations
+      of "advertisement", and similar, as
+      possible. So this would expand to match just "adv", or "advert", or
+      "adverts", or "advertising", or "advertisement", or "advertisements". You get the idea. But it would not
+      match "advertizements" (with a "z"). We could fix that by changing our regular
+      expression to: "/.*/adv((er)?ts?|erti(s|z)(ing|ements?))?/", which
+      would then match either spelling.
+
+      /.*/advert[0-9]+\.(gif|jpe?g) - Again another
+      path statement with forward slashes. Anything in the square brackets
+      "[ ]" can be matched. This is using
+      "0-9" as a shorthand expression to mean any
+      digit one through nine. It is the same as saying "0123456789". So any digit matches. The "+" means one or more of the preceding expression must
+      be included. The preceding expression here is what is in the square
+      brackets -- in this case, any digit one through nine. Then, at the end,
+      we have a grouping: "(gif|jpe?g)". This
+      includes a "|", so this needs to match the
+      expression on either side of that bar character also. A simple
+      "gif" on one side, and the other side will
+      in turn match either "jpeg" or "jpg", since the "?" means
+      the letter "e" is optional and can be
+      matched once or not at all. So we are building an expression here to
+      match image GIF or JPEG type image file. It must include the literal
+      string "advert", then one or more digits,
+      and a "." (which is now a literal, and not a
+      special character, since it is escaped with "\"), and lastly either "gif", or "jpeg", or
+      "jpg". Some possible matches would include:
+      "//advert1.jpg", "/nasty/ads/advert1234.gif", "/banners/from/hell/advert99.jpg". It would not match
+      "advert1.gif" (no leading slash), or
+      "/adverts232.jpg" (the expression does not
+      include an "s"), or "/advert1.jsp" ("jsp" is not
+      in the expression anywhere).
+
+      We are barely scratching the surface of regular expressions here so
+      that you can understand the default Privoxy configuration files, and maybe use this
+      knowledge to customize your own installation. There is much, much more
+      that can be done with regular expressions. Now that you know enough to
+      get started, you can learn more on your own :/
+
+      More reading on Perl Compatible Regular expressions: http://perldoc.perl.org/perlre.html
+
+      For information on regular expression based substitutions and their
+      applications in filters, please see the filter file tutorial in this manual.
     
-    
-      
-        14. Appendix
-      
-      
-        
-          14.1. Regular Expressions
-        
-        
-          Privoxy uses Perl-style "regular expressions" in its actions files and filter file, through the PCRE and PCRS libraries.
-        
-        
-          If you are reading this, you probably don't understand what "regular expressions" are, or what they can
-          do. So this will be a very brief introduction only. A full
-          explanation would require a book ;-)
-        
-        
-          Regular expressions provide a language to describe patterns that
-          can be run against strings of characters (letter, numbers, etc), to
-          see if they match the string or not. The patterns are themselves
-          (sometimes complex) strings of literal characters, combined with
-          wild-cards, and other special characters, called meta-characters.
-          The "meta-characters" have special
-          meanings and are used to build complex patterns to be matched
-          against. Perl Compatible Regular Expressions are an especially
-          convenient "dialect" of the regular
-          expression language.
-        
-        
-          To make a simple analogy, we do something similar when we use
-          wild-card characters when listing files with the dir command in DOS. *.*
-          matches all filenames. The "special"
-          character here is the asterisk which matches any and all
-          characters. We can be more specific and use ? to match just individual characters. So "dir file?.text" would match "file1.txt", "file2.txt",
-          etc. We are pattern matching, using a similar technique to "regular expressions"!
-        
-        
-          Regular expressions do essentially the same thing, but are much,
-          much more powerful. There are many more "special characters" and ways of building complex
-          patterns however. Let's look at a few of the common ones, and then
-          some examples:
-        
-        
-          
-            
-              
-            
-          
-        
-                . -
-                Matches any single character, e.g. "a", "A", "4", ":", or
-                "@".
-              
-
-        
-          
-            
-              
-            
-          
-        
-                ? - The
-                preceding character or expression is matched ZERO or ONE
-                times. Either/or.
-              
-
-        
-          
-            
-              
-            
-          
-        
-                + - The
-                preceding character or expression is matched ONE or MORE
-                times.
-              
-
-        
-          
-            
-              
-            
-          
-        
-                * - The
-                preceding character or expression is matched ZERO or MORE
-                times.
-              
-
-        
-          
-            
-              
-            
-          
-        
-                \ - The
-                "escape" character denotes that
-                the following character should be taken literally. This is
-                used where one of the special characters (e.g. ".") needs to be taken literally and not as a
-                special meta-character. Example: "example\.com", makes sure the period is
-                recognized only as a period (and not expanded to its
-                meta-character meaning of any single character).
-              
-
-        
-          
-            
-              
-            
-          
-        
-                [ ] -
-                Characters enclosed in brackets will be matched if any of the
-                enclosed characters are encountered. For instance, "[0-9]" matches any numeric digit (zero
-                through nine). As an example, we can combine this with "+" to match any digit one of more
-                times: "[0-9]+".
-              
-
-        
-          
-            
-              
-            
-          
-        
-                ( ) -
-                parentheses are used to group a sub-expression, or multiple
-                sub-expressions.
-              
-
-        
-          
-            
-              
-            
-          
-        
-                | - The
-                "bar" character works like an
-                "or" conditional statement. A
-                match is successful if the sub-expression on either side of
-                "|" matches. As an example: "/(this|that) example/" uses grouping
-                and the bar character and would match either "this example" or "that
-                example", and nothing else.
-              
-
-        
-          These are just some of the ones you are likely to use when matching
-          URLs with Privoxy, and is a long
-          way from a definitive list. This is enough to get us started with a
-          few simple examples which may be more illuminating:
-        
-        
-          /.*/banners/.* - A simple example that
-          uses the common combination of "." and
-          "*" to denote any character, zero or
-          more times. In other words, any string at all. So we start with a
-          literal forward slash, then our regular expression pattern (".*") another literal forward slash, the
-          string "banners", another forward slash,
-          and lastly another ".*". We are building
-          a directory path here. This will match any file with the path that
-          has a directory named "banners" in it.
-          The ".*" matches any characters, and
-          this could conceivably be more forward slashes, so it might expand
-          into a much longer looking path. For example, this could match:
-          "/eye/hate/spammers/banners/annoy_me_please.gif", or
-          just "/banners/annoying.html", or almost
-          an infinite number of other possible combinations, just so it has
-          "banners" in the path somewhere.
-        
-        
-          And now something a little more complex:
-        
-        
-          /.*/adv((er)?ts?|ertis(ing|ements?))?/ -
-          We have several literal forward slashes again ("/"), so we are building another expression that is
-          a file path statement. We have another ".*", so we are matching against any conceivable
-          sub-path, just so it matches our expression. The only true literal
-          that must
-          match our pattern is adv, together with the forward slashes. What
-          comes after the "adv" string is the
-          interesting part.
-        
-        
-          Remember the "?" means the preceding
-          expression (either a literal character or anything grouped with
-          "(...)" in this case) can exist or not,
-          since this means either zero or one match. So "((er)?ts?|ertis(ing|ements?))" is optional, as are
-          the individual sub-expressions: "(er)",
-          "(ing|ements?)", and the "s". The "|" means "or". We have two of those. For instance,
-          "(ing|ements?)", can expand to match
-          either "ing" OR "ements?". What is being done here, is an attempt at
-          matching as many variations of "advertisement", and similar, as possible. So this
-          would expand to match just "adv", or
-          "advert", or "adverts", or "advertising", or "advertisement", or "advertisements". You get the idea. But it would not
-          match "advertizements" (with a "z"). We could fix that by changing our
-          regular expression to: "/.*/adv((er)?ts?|erti(s|z)(ing|ements?))?/", which
-          would then match either spelling.
-        
-        
-          /.*/advert[0-9]+\.(gif|jpe?g) - Again
-          another path statement with forward slashes. Anything in the square
-          brackets "[ ]" can be matched. This is
-          using "0-9" as a shorthand expression to
-          mean any digit one through nine. It is the same as saying "0123456789". So any digit matches. The "+" means one or more of the preceding
-          expression must be included. The preceding expression here is what
-          is in the square brackets -- in this case, any digit one through
-          nine. Then, at the end, we have a grouping: "(gif|jpe?g)". This includes a "|", so this needs to match the expression on either
-          side of that bar character also. A simple "gif" on one side, and the other side will in turn
-          match either "jpeg" or "jpg", since the "?"
-          means the letter "e" is optional and can
-          be matched once or not at all. So we are building an expression
-          here to match image GIF or JPEG type image file. It must include
-          the literal string "advert", then one or
-          more digits, and a "." (which is now a
-          literal, and not a special character, since it is escaped with
-          "\"), and lastly either "gif", or "jpeg", or
-          "jpg". Some possible matches would
-          include: "//advert1.jpg", "/nasty/ads/advert1234.gif", "/banners/from/hell/advert99.jpg". It would not
-          match "advert1.gif" (no leading slash),
-          or "/adverts232.jpg" (the expression
-          does not include an "s"), or "/advert1.jsp" ("jsp" is not in the expression anywhere).
-        
-        
-          We are barely scratching the surface of regular expressions here so
-          that you can understand the default Privoxy configuration files, and maybe use
-          this knowledge to customize your own installation. There is much,
-          much more that can be done with regular expressions. Now that you
-          know enough to get started, you can learn more on your own :/
-        
-        
-          More reading on Perl Compatible Regular expressions: http://perldoc.perl.org/perlre.html
-        
-        
-          For information on regular expression based substitutions and their
-          applications in filters, please see the filter file tutorial in this manual.
-        
-      
-      
-        
-          14.2. Privoxy's Internal Pages
-        
-        
-          Since Privoxy proxies each
-          requested web page, it is easy for Privoxy to trap certain special URLs. In this
-          way, we can talk directly to Privoxy, and see how it is configured, see how
-          our rules are being applied, change these rules and other
-          configuration options, and even turn Privoxy's filtering off, all with a web
-          browser.
-        
-        
-          The URLs listed below are the special ones that allow direct access
-          to Privoxy. Of course, Privoxy must be running to access these.
-          If not, you will get a friendly error message. Internet access is
-          not necessary either.
-        
-        
-        
-        
-          
-            
-              Privoxy main page:
-            
-            
-            
-              
-                http://config.privoxy.org/
-              
-            
-            
-              There is a shortcut: http://p.p/ (But it doesn't provide a fall-back to a
-              real page, in case the request is not sent through Privoxy)
-            
-          
-          
-            
-              Show information about the current configuration, including
-              viewing and editing of actions files:
-            
-            
-            
-              
-                http://config.privoxy.org/show-status
-              
-            
-          
-          
-            
-              Show the source code version numbers:
-            
-            
-            
-              
-                http://config.privoxy.org/show-version
-              
-            
-          
-          
-            
-              Show the browser's request headers:
-            
-            
-            
-              
-                http://config.privoxy.org/show-request
-              
-            
-          
-          
-            
-              Show which actions apply to a URL and why:
-            
-            
-            
-              
-                http://config.privoxy.org/show-url-info
-              
-            
-          
-          
-            
-              Toggle Privoxy on or off. This feature can be turned off/on in
-              the main config file. When toggled
-              "off", "Privoxy" continues to run, but only as a
-              pass-through proxy, with no actions taking place:
-            
-            
-            
-              
-                http://config.privoxy.org/toggle
-              
-            
-            
-              Short cuts. Turn off, then on:
-            
-            
-            
-              
-                http://config.privoxy.org/toggle?set=disable
-              
-            
-            
-            
-              
-                http://config.privoxy.org/toggle?set=enable
-              
-            
-          
-        
 
-        
-          These may be bookmarked for quick reference. See next.
-        
-        
-          
-            14.2.1. Bookmarklets
-          
-          
-            Below are some "bookmarklets" to allow
-            you to easily access a "mini" version
-            of some of Privoxy's special
-            pages. They are designed for MS Internet Explorer, but should
-            work equally well in Netscape, Mozilla, and other browsers which
-            support JavaScript. They are designed to run directly from your
-            bookmarks - not by clicking the links below (although that should
-            work for testing).
-          
-          
-            To save them, right-click the link and choose "Add to Favorites" (IE) or "Add Bookmark" (Netscape). You will get a warning
-            that the bookmark "may not be safe" -
-            just click OK. Then you can run the Bookmarklet directly from
-            your favorites/bookmarks. For even faster access, you can put
-            them on the "Links" bar (IE) or the
-            "Personal Toolbar" (Netscape), and run
-            them with a single click.
-          
-          
-          
-          
-            
-              
-                Privoxy - Enable
-              
-            
-            
-              
-                Privoxy - Disable
-              
-            
-            
-              
-                Privoxy - Toggle Privoxy (Toggles between
-                enabled and disabled)
-              
-            
-            
-              
-                Privoxy- View Status
-              
-            
-            
-              
-                Privoxy - Why?
-              
-            
-          
-
-          
-            Credit: The site which gave us the general idea for these
-            bookmarklets is www.bookmarklets.com. They have more information about
-            bookmarklets.
-          
-        
-      
-      
-        
-          14.3. Chain of Events
-        
-        
-          Let's take a quick look at how some of Privoxy's core features are triggered, and the
-          ensuing sequence of events when a web page is requested by your
-          browser:
-        
-        
-        
+    
+      14.2. Privoxy's
+      Internal Pages
+
+      Since Privoxy proxies each
+      requested web page, it is easy for Privoxy to trap certain special URLs. In this way,
+      we can talk directly to Privoxy, and
+      see how it is configured, see how our rules are being applied, change
+      these rules and other configuration options, and even turn Privoxy's filtering off, all with a web
+      browser.
+
+      The URLs listed below are the special ones that allow direct access
+      to Privoxy. Of course, Privoxy must be running to access these. If not,
+      you will get a friendly error message. Internet access is not necessary
+      either.
+
+      
+        
+          Privoxy main page:

+
+          
+            http://config.privoxy.org/
+          
+
+          There is a shortcut: http://p.p/ (But it doesn't provide a fall-back to a
+          real page, in case the request is not sent through Privoxy)
+        
+
+        
+          Show information about the current configuration, including
+          viewing and editing of actions files:

+
+          
+            http://config.privoxy.org/show-status
+          
+        
+
+        
+          Show the source code version numbers:

+
+          
+            http://config.privoxy.org/show-version
+          
+        
+
+        
+          Show the browser's request headers:

+
+          
+            http://config.privoxy.org/show-request
+          
+        
+
+        
+          Show which actions apply to a URL and why:

+
+          
+            http://config.privoxy.org/show-url-info
+          
+        
+
+        
+          Toggle Privoxy on or off. This feature can be turned off/on in
+          the main config file. When toggled
+          "off", "Privoxy" continues to run, but only as a
+          pass-through proxy, with no actions taking place:

+
+          
+            http://config.privoxy.org/toggle
+          
+
+          Short cuts. Turn off, then on:

+
+          
+            http://config.privoxy.org/toggle?set=disable
+          

+
+          
+            http://config.privoxy.org/toggle?set=enable
+          
+        
+      
+
+      These may be bookmarked for quick reference. See next.
+
+      
+        14.2.1.
+        Bookmarklets
+
+        Below are some "bookmarklets" to allow
+        you to easily access a "mini" version of
+        some of Privoxy's special pages.
+        They are designed for MS Internet Explorer, but should work equally
+        well in Netscape, Mozilla, and other browsers which support
+        JavaScript. They are designed to run directly from your bookmarks -
+        not by clicking the links below (although that should work for
+        testing).
+
+        To save them, right-click the link and choose "Add to Favorites" (IE) or "Add
+        Bookmark" (Netscape). You will get a warning that the bookmark
+        "may not be safe" - just click OK. Then
+        you can run the Bookmarklet directly from your favorites/bookmarks.
+        For even faster access, you can put them on the "Links" bar (IE) or the "Personal
+        Toolbar" (Netscape), and run them with a single click.
+
         
           
-            
-              First, your web browser requests a web page. The browser knows
-              to send the request to Privoxy, which will in turn, relay the
-              request to the remote web server after passing the following
-              tests:
-            
-          
-          
-            
-              Privoxy traps any request for
-              its own internal CGI pages (e.g http://p.p/) and sends the CGI page back to the
-              browser.
-            
-          
-          
-            
-              Next, Privoxy checks to see if
-              the URL matches any "+block" patterns. If so, the URL is
-              then blocked, and the remote web server will not be contacted.
-              "+handle-as-image" and "+handle-as-empty-document" are then
-              checked, and if there is no match, an HTML "BLOCKED" page is sent back to the browser.
-              Otherwise, if it does match, an image is returned for the
-              former, and an empty text document for the latter. The type of
-              image would depend on the setting of "+set-image-blocker" (blank, checkerboard
-              pattern, or an HTTP redirect to an image elsewhere).
-            
-          
-          
-            
-              Untrusted URLs are blocked. If URLs are being added to the trust file, then that is done.
-            
-          
-          
-            
-              If the URL pattern matches the "+fast-redirects" action, it is then
-              processed. Unwanted parts of the requested URL are stripped.
-            
-          
-          
-            
-              Now the rest of the client browser's request headers are
-              processed. If any of these match any of the relevant actions
-              (e.g. "+hide-user-agent", etc.), headers are
-              suppressed or forged as determined by these actions and their
-              parameters.
-            
+            Privoxy - Enable
           
+
           
-            
-              Now the web server starts sending its response back (i.e.
-              typically a web page).
-            
+            Privoxy - Disable
           
+
           
-            
-              First, the server headers are read and processed to determine,
-              among other things, the MIME type (document type) and encoding.
-              The headers are then filtered as determined by the "+crunch-incoming-cookies", "+session-cookies-only", and "+downgrade-http-version" actions.
-            
+            Privoxy - Toggle Privoxy (Toggles between
+            enabled and disabled)
           
+
           
-            
-              If any "+filter" action or "+deanimate-gifs" action applies (and the
-              document type fits the action), the rest of the page is read
-              into memory (up to a configurable limit). Then the filter rules
-              (from default.filter and any other
-              filter files) are processed against the buffered content.
-              Filters are applied in the order they are specified in one of
-              the filter files. Animated GIFs, if present, are reduced to
-              either the first or last frame, depending on the action
-              setting.The entire page, which is now filtered, is then sent by
-              Privoxy back to your browser.
-            
-            
-              If neither a "+filter" action or "+deanimate-gifs" matches, then Privoxy passes the raw data through to the
-              client browser as it becomes available.
-            
+            Privoxy- View Status
           
+
           
-            
-              As the browser receives the now (possibly filtered) page
-              content, it reads and then requests any URLs that may be
-              embedded within the page source, e.g. ad images, stylesheets,
-              JavaScript, other HTML documents (e.g. frames), sounds, etc.
-              For each of these objects, the browser issues a separate
-              request (this is easily viewable in Privoxy's logs). And each such request is
-              in turn processed just as above. Note that a complex web page
-              will have many, many such embedded URLs. If these secondary
-              requests are to a different server, then quite possibly a very
-              differing set of actions is triggered.
-            
+            Privoxy - Why?
           
         
 
-        
-          NOTE: This is somewhat of a simplistic overview of what happens
-          with each URL request. For the sake of brevity and simplicity, we
-          have focused on Privoxy's core
-          features only.
-        
+        Credit: The site which gave us the general idea for these
+        bookmarklets is www.bookmarklets.com. They have more information about
+        bookmarklets.
       
-      
-        
-          14.4. Troubleshooting: Anatomy of an
-          Action
-        
-        
-          The way Privoxy applies actions and filters to any given URL can be
-          complex, and not always so easy to understand what is happening.
-          And sometimes we need to be able to see just what Privoxy is doing. Especially, if something
-          Privoxy is doing is causing us a
-          problem inadvertently. It can be a little daunting to look at the
-          actions and filters files themselves, since they tend to be filled
-          with regular expressions whose
-          consequences are not always so obvious.
-        
-        
-          One quick test to see if Privoxy
-          is causing a problem or not, is to disable it temporarily. This
-          should be the first troubleshooting step. See the Bookmarklets section on a
-          quick and easy way to do this (be sure to flush caches afterward!).
-          Looking at the logs is a good idea too. (Note that both the toggle
-          feature and logging are enabled via config file settings, and may need to be turned
-          "on".)
-        
-        
-          Another easy troubleshooting step to try is if you have done any
-          customization of your installation, revert back to the installed
-          defaults and see if that helps. There are times the developers get
-          complaints about one thing or another, and the problem is more
-          related to a customized configuration issue.
-        
-        
-          Privoxy also provides the http://config.privoxy.org/show-url-info page that can
-          show us very specifically how actions are being applied to any given URL.
-          This is a big help for troubleshooting.
-        
-        
-          First, enter one URL (or partial URL) at the prompt, and then Privoxy will tell us how the current
-          configuration will handle it. This will not help with filtering
-          effects (i.e. the "+filter" action) from one of the filter files
-          since this is handled very differently and not so easy to trap! It
-          also will not tell you about any other URLs that may be embedded
-          within the URL you are testing. For instance, images such as ads
-          are expressed as URLs within the raw page source of HTML pages. So
-          you will only get info for the actual URL that is pasted into the
-          prompt area -- not any sub-URLs. If you want to know about embedded
-          URLs like ads, you will have to dig those out of the HTML source.
-          Use your browser's "View Page Source"
-          option for this. Or right click on the ad, and grab the URL.
-        
-        
-          Let's try an example, google.com, and look at it one section at a time in a
-          sample configuration (your real configuration may vary):
-        
-        
-        
-        
-          
-            
-+    
+
+    
+      14.3. Chain of
+      Events
+
+      Let's take a quick look at how some of Privoxy's core features are triggered, and the
+      ensuing sequence of events when a web page is requested by your
+      browser:
+
+      
+        
+          First, your web browser requests a web page. The browser knows
+          to send the request to Privoxy,
+          which will in turn, relay the request to the remote web server
+          after passing the following tests:
+        
+
+        
+          Privoxy traps any request for
+          its own internal CGI pages (e.g http://p.p/) and sends the CGI page back to the
+          browser.
+        
+
+        
+          Next, Privoxy checks to see if
+          the URL matches any "+block" patterns. If so, the URL is then
+          blocked, and the remote web server will not be contacted. "+handle-as-image" and "+handle-as-empty-document" are then checked,
+          and if there is no match, an HTML "BLOCKED" page is sent back to the browser.
+          Otherwise, if it does match, an image is returned for the former,
+          and an empty text document for the latter. The type of image would
+          depend on the setting of "+set-image-blocker" (blank, checkerboard
+          pattern, or an HTTP redirect to an image elsewhere).
+        
+
+        
+          Untrusted URLs are blocked. If URLs are being added to the
+          trust file, then that is done.
+        
+
+        
+          If the URL pattern matches the "+fast-redirects" action, it is then processed.
+          Unwanted parts of the requested URL are stripped.
+        
+
+        
+          Now the rest of the client browser's request headers are
+          processed. If any of these match any of the relevant actions (e.g.
+          "+hide-user-agent", etc.), headers are
+          suppressed or forged as determined by these actions and their
+          parameters.
+        
+
+        
+          Now the web server starts sending its response back (i.e.
+          typically a web page).
+        
+
+        
+          First, the server headers are read and processed to determine,
+          among other things, the MIME type (document type) and encoding. The
+          headers are then filtered as determined by the "+crunch-incoming-cookies", "+session-cookies-only", and "+downgrade-http-version" actions.
+        
+
+        
+          If any "+filter" action or "+deanimate-gifs" action applies (and the
+          document type fits the action), the rest of the page is read into
+          memory (up to a configurable limit). Then the filter rules (from
+          default.filter and any other filter
+          files) are processed against the buffered content. Filters are
+          applied in the order they are specified in one of the filter files.
+          Animated GIFs, if present, are reduced to either the first or last
+          frame, depending on the action setting.The entire page, which is
+          now filtered, is then sent by Privoxy back to your browser.
+
+          If neither a "+filter" action or "+deanimate-gifs" matches, then Privoxy passes the raw data through to the
+          client browser as it becomes available.
+        
+
+        
+          As the browser receives the now (possibly filtered) page
+          content, it reads and then requests any URLs that may be embedded
+          within the page source, e.g. ad images, stylesheets, JavaScript,
+          other HTML documents (e.g. frames), sounds, etc. For each of these
+          objects, the browser issues a separate request (this is easily
+          viewable in Privoxy's logs). And
+          each such request is in turn processed just as above. Note that a
+          complex web page will have many, many such embedded URLs. If these
+          secondary requests are to a different server, then quite possibly a
+          very differing set of actions is triggered.
+        
+      
+
+      NOTE: This is somewhat of a simplistic overview of what happens with
+      each URL request. For the sake of brevity and simplicity, we have
+      focused on Privoxy's core features
+      only.
+    
+
+    
+      14.4.
+      Troubleshooting: Anatomy of an Action
+
+      The way Privoxy applies actions and filters to any given URL can be complex,
+      and not always so easy to understand what is happening. And sometimes
+      we need to be able to see
+      just what Privoxy is doing.
+      Especially, if something Privoxy is
+      doing is causing us a problem inadvertently. It can be a little
+      daunting to look at the actions and filters files themselves, since
+      they tend to be filled with regular
+      expressions whose consequences are not always so obvious.
+
+      One quick test to see if Privoxy is
+      causing a problem or not, is to disable it temporarily. This should be
+      the first troubleshooting step. See the Bookmarklets section on a quick
+      and easy way to do this (be sure to flush caches afterward!). Looking
+      at the logs is a good idea too. (Note that both the toggle feature and
+      logging are enabled via config file settings,
+      and may need to be turned "on".)
+
+      Another easy troubleshooting step to try is if you have done any
+      customization of your installation, revert back to the installed
+      defaults and see if that helps. There are times the developers get
+      complaints about one thing or another, and the problem is more related
+      to a customized configuration issue.
+
+      Privoxy also provides the http://config.privoxy.org/show-url-info page that can show
+      us very specifically how actions are
+      being applied to any given URL. This is a big help for
+      troubleshooting.
+
+      First, enter one URL (or partial URL) at the prompt, and then
+      Privoxy will tell us how the current
+      configuration will handle it. This will not help with filtering effects
+      (i.e. the "+filter" action) from one of the filter files since
+      this is handled very differently and not so easy to trap! It also will
+      not tell you about any other URLs that may be embedded within the URL
+      you are testing. For instance, images such as ads are expressed as URLs
+      within the raw page source of HTML pages. So you will only get info for
+      the actual URL that is pasted into the prompt area -- not any sub-URLs.
+      If you want to know about embedded URLs like ads, you will have to dig
+      those out of the HTML source. Use your browser's "View Page Source" option for this. Or right click on
+      the ad, and grab the URL.
+
+      Let's try an example, google.com, and look at it one section at a time in a sample
+      configuration (your real configuration may vary):
+
+      
+        
+          
-          
-        
+              Matches for http://www.google.com:
 
  In file: default.action [ View ] [ View ] [ Edit ]
 (no matches in this file)
 
-            
-
-        
-          This is telling us how we have defined our "actions", and which ones match for our test
-          case, "google.com". Displayed is all the
-          actions that are available to us. Remember, the + sign denotes "on". - denotes "off". So
-          some are "on" here, but many are "off". Each example we try may provide a
-          slightly different end result, depending on our configuration
-          directives.
-        
-        
-          The first listing is for our default.action file. The large, multi-line listing,
-          is how the actions are set to match for all URLs, i.e. our default
-          settings. If you look at your "actions"
-          file, this would be the section just below the "aliases" section near the top. This will apply to
-          all URLs as signified by the single forward slash at the end of the
-          listing -- " / ".
-        
-        
-          But we have defined additional actions that would be exceptions to
-          these general rules, and then we list specific URLs (or patterns)
-          that these exceptions would apply to. Last match wins. Just below
-          this then are two explicit matches for ".google.com". The first is negating our previous
-          cookie setting, which was for "+session-cookies-only" (i.e. not persistent).
-          So we will allow persistent cookies for google, at least that is
-          how it is in this example. The second turns off any "+fast-redirects" action, allowing this to take
-          place unmolested. Note that there is a leading dot here -- ".google.com". This will match any hosts and
-          sub-domains, in the google.com domain also, such as "www.google.com" or "mail.google.com". But it would not match "www.google.de"! So, apparently, we have these
-          two actions defined as exceptions to the general rules at the top
-          somewhere in the lower part of our default.action file, and "google.com" is referenced somewhere in these latter
-          sections.
-        
-        
-          Then, for our user.action file, we again
-          have no hits. So there is nothing google-specific that we might
-          have added to our own, local configuration. If there was, those
-          actions would over-rule any actions from previously processed
-          files, such as default.action. user.action typically has the last word. This is
-          the best place to put hard and fast exceptions,
-        
-        
-          And finally we pull it all together in the bottom section and
-          summarize how Privoxy is applying
-          all its "actions" to "google.com":
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      This is telling us how we have defined our "actions",
+      and which ones match for our test case, "google.com". Displayed is all the actions that are
+      available to us. Remember, the + sign denotes
+      "on". - denotes
+      "off". So some are "on" here, but many are "off". Each example we try may provide a slightly
+      different end result, depending on our configuration directives.
+
+      The first listing is for our default.action file. The large, multi-line listing, is
+      how the actions are set to match for all URLs, i.e. our default
+      settings. If you look at your "actions"
+      file, this would be the section just below the "aliases" section near the top. This will apply to all
+      URLs as signified by the single forward slash at the end of the listing
+      -- " / ".
+
+      But we have defined additional actions that would be exceptions to
+      these general rules, and then we list specific URLs (or patterns) that
+      these exceptions would apply to. Last match wins. Just below this then
+      are two explicit matches for ".google.com".
+      The first is negating our previous cookie setting, which was for
+      "+session-cookies-only" (i.e. not persistent). So we
+      will allow persistent cookies for google, at least that is how it is in
+      this example. The second turns off any "+fast-redirects" action, allowing this to take
+      place unmolested. Note that there is a leading dot here -- ".google.com". This will match any hosts and
+      sub-domains, in the google.com domain also, such as "www.google.com" or "mail.google.com". But it would not match "www.google.de"! So, apparently, we have these two
+      actions defined as exceptions to the general rules at the top somewhere
+      in the lower part of our default.action file,
+      and "google.com" is referenced somewhere in
+      these latter sections.
+
+      Then, for our user.action file, we again
+      have no hits. So there is nothing google-specific that we might have
+      added to our own, local configuration. If there was, those actions
+      would over-rule any actions from previously processed files, such as
+      default.action. user.action typically has the last word. This is the
+      best place to put hard and fast exceptions,
+
+      And finally we pull it all together in the bottom section and
+      summarize how Privoxy is applying all
+      its "actions" to "google.com":
+
+      
+        
+          
-          
-        
+              Final results:
 
  -add-header
@@ -924,27 +809,23 @@ In file: user.action [ View ] 
-            
-
-        
-          Notice the only difference here to the previous listing, is to
-          "fast-redirects" and "session-cookies-only", which are activated
-          specifically for this site in our configuration, and thus show in
-          the "Final Results".
-        
-        
-          Now another example, "ad.doubleclick.net":
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      Notice the only difference here to the previous listing, is to
+      "fast-redirects" and "session-cookies-only", which are activated specifically
+      for this site in our configuration, and thus show in the "Final Results".
+
+      Now another example, "ad.doubleclick.net":
+
+      
+        
+          
-          
-        
+              { +block{Domains starts with "ad"} }
   ad*.
 
@@ -954,48 +835,41 @@ In file: user.action [ View ] 
-            
-
-        
-          We'll just show the interesting part here - the explicit matches.
-          It is matched three different times. Two "+block{}" sections, and a "+block{} +handle-as-image", which is the expanded
-          form of one of our aliases that had been defined as: "+block-as-image". ("Aliases" are defined in the first section of
-          the actions file and typically used to combine more than one
-          action.)
-        
-        
-          Any one of these would have done the trick and blocked this as an
-          unwanted image. This is unnecessarily redundant since the last case
-          effectively would also cover the first. No point in taking chances
-          with these guys though ;-) Note that if you want an ad or obnoxious
-          URL to be invisible, it should be defined as "ad.doubleclick.net" is done here -- as both a "+block{}" and an "+handle-as-image". The custom alias "+block-as-image"
-          just simplifies the process and make it more readable.
-        
-        
-          One last example. Let's try "http://www.example.net/adsl/HOWTO/". This one is
-          giving us problems. We are getting a blank page. Hmmm ...
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      We'll just show the interesting part here - the explicit matches. It
+      is matched three different times. Two "+block{}" sections, and a "+block{}
+      +handle-as-image", which is the expanded form of one of our
+      aliases that had been defined as: "+block-as-image". ("Aliases"
+      are defined in the first section of the actions file and typically used
+      to combine more than one action.)
+
+      Any one of these would have done the trick and blocked this as an
+      unwanted image. This is unnecessarily redundant since the last case
+      effectively would also cover the first. No point in taking chances with
+      these guys though ;-) Note that if you want an ad or obnoxious URL to
+      be invisible, it should be defined as "ad.doubleclick.net" is done here -- as both a "+block{}"
+      and an "+handle-as-image". The custom alias "+block-as-image" just
+      simplifies the process and make it more readable.
+
+      One last example. Let's try "http://www.example.net/adsl/HOWTO/". This one is giving
+      us problems. We are getting a blank page. Hmmm ...
+
+      
+        
+          
-          
-        
+              Matches for http://www.example.net/adsl/HOWTO/:
 
  In file: default.action [ View ] [ View ] 
-            
-
-        
-          Ooops, the "/adsl/" is matching "/ads" in our configuration! But we did not
-          want this at all! Now we see why we get the blank page. It is
-          actually triggering two different actions here, and the effects are
-          aggregated so that the URL is blocked, and Privoxy is told to treat the block as if it
-          were an image. But this is, of course, all wrong. We could now add
-          a new action below this (or better in our own user.action file) that explicitly un blocks ( "{-block}") paths with "adsl" in them (remember, last match in the
-          configuration wins). There are various ways to handle such
-          exceptions. Example:
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      Ooops, the "/adsl/" is matching
+      "/ads" in our configuration! But we did not
+      want this at all! Now we see why we get the blank page. It is actually
+      triggering two different actions here, and the effects are aggregated
+      so that the URL is blocked, and Privoxy is told to treat the block as if it were
+      an image. But this is, of course, all wrong. We could now add a new
+      action below this (or better in our own user.action file) that explicitly un blocks ( "{-block}")
+      paths with "adsl" in them (remember, last
+      match in the configuration wins). There are various ways to handle such
+      exceptions. Example:
+
+      
+        
+          
-          
-        
+              { -block }
   /adsl
 
-            
-
-        
-          Now the page displays ;-) Remember to flush your browser's caches
-          when making these kinds of changes to your configuration to insure
-          that you get a freshly delivered page! Or, try using Shift+Reload.
-        
-        
-          But now what about a situation where we get no explicit matches
-          like we did with:
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      Now the page displays ;-) Remember to flush your browser's caches
+      when making these kinds of changes to your configuration to insure that
+      you get a freshly delivered page! Or, try using Shift+Reload.
+
+      But now what about a situation where we get no explicit matches like
+      we did with:
+
+      
+        
+          
-          
-        
+              { +block{Path starts with "ads".} +handle-as-image }
  /ads
 
-            
-
-        
-          That actually was very helpful and pointed us quickly to where the
-          problem was. If you don't get this kind of match, then it means one
-          of the default rules in the first section of default.action is causing the problem. This would
-          require some guesswork, and maybe a little trial and error to
-          isolate the offending rule. One likely cause would be one of the "+filter" actions. These tend to be harder to
-          troubleshoot. Try adding the URL for the site to one of aliases
-          that turn off "+filter":
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      That actually was very helpful and pointed us quickly to where the
+      problem was. If you don't get this kind of match, then it means one of
+      the default rules in the first section of default.action is causing the problem. This would
+      require some guesswork, and maybe a little trial and error to isolate
+      the offending rule. One likely cause would be one of the "+filter"
+      actions. These tend to be harder to troubleshoot. Try adding the URL
+      for the site to one of aliases that turn off "+filter":
+
+      
+        
+          
-          
-        
+              { shop }
  .quietpc.com
  .worldpay.com   # for quietpc.com
@@ -1143,111 +1006,96 @@ In file: user.action [ View ] 
-            
-
-        
-          "{ shop }" is
-          an "alias" that expands to "{ -filter -session-cookies-only
-          }". Or you could do your own exception to negate
-          filtering:
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      "{ shop }" is an
+      "alias" that expands to "{ -filter -session-cookies-only
+      }". Or you could do your own exception to negate
+      filtering:
+
+      
+        
+          
-          
-        
+              { -filter }
  # Disable ALL filter actions for sites in this section
  .forbes.com
  developer.ibm.com
  localhost
 
-            
-
-        
-          This would turn off all filtering for these sites. This is best put
-          in user.action, for local site
-          exceptions. Note that when a simple domain pattern is used by
-          itself (without the subsequent path portion), all sub-pages within
-          that domain are included automatically in the scope of the action.
-        
-        
-          Images that are inexplicably being blocked, may well be hitting the
-          "+filter{banners-by-size}" rule, which assumes
-          that images of certain sizes are ad banners (works well most of the time
-          since these tend to be standardized).
-        
-        
-          "{ fragile }"
-          is an alias that disables most actions that are the most likely to
-          cause trouble. This can be used as a last resort for problem sites.
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      This would turn off all filtering for these sites. This is best put
+      in user.action, for local site exceptions.
+      Note that when a simple domain pattern is used by itself (without the
+      subsequent path portion), all sub-pages within that domain are included
+      automatically in the scope of the action.
+
+      Images that are inexplicably being blocked, may well be hitting the
+      "+filter{banners-by-size}" rule, which assumes that
+      images of certain sizes are ad banners (works well most of the time since these tend to be
+      standardized).
+
+      "{ fragile }" is
+      an alias that disables most actions that are the most likely to cause
+      trouble. This can be used as a last resort for problem sites.
+
+      
+        
+          
-          
-        
+              { fragile }
  # Handle with care: easy to break
  mail.google.
  mybank.example.com
 
-            
-
-        
-          Remember to flush
-          caches! Note that the mail.google reference lacks the TLD portion (e.g.
-          ".com"). This will effectively match any
-          TLD with google in it, such as mail.google.de., just as an example.
-        
-        
-          If this still does not work, you will have to go through the
-          remaining actions one by one to find which one(s) is causing the
-          problem.
-        
-      
-    
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-            Prev
-          
-            Home
-          
-             
-          

-            See Also
-          
-             
-          
-             
           
         
       
+
+      Remember to flush caches!
+      Note that the mail.google reference lacks the
+      TLD portion (e.g. ".com"). This will
+      effectively match any TLD with google in it,
+      such as mail.google.de., just as an
+      example.
+
+      If this still does not work, you will have to go through the
+      remaining actions one by one to find which one(s) is causing the
+      problem.
     
-  
-
+  
 
+  
+    
+
+    
+      
+        
+
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home  
See Also    
+  
+
+
diff --git a/doc/webserver/user-manual/config.html b/doc/webserver/user-manual/config.html
index 9c4ba598..3c5c45c6 100644
--- a/doc/webserver/user-manual/config.html
+++ b/doc/webserver/user-manual/config.html
@@ -1,1007 +1,840 @@
-
+
+
 
-  
-    
-    
-      The Main Configuration File
-    
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
-        
-          
-          
-          
-        
-      
-            Privoxy 3.0.18 User Manual
-          

-            Prev
-          
-          
-            Next
-          
-      
-    
-    
-      
-        7. The Main Configuration File
-      
-      
-        By default, the main configuration file is named config, with the exception of Windows, where it is
-        named config.txt. Configuration lines
-        consist of an initial keyword followed by a list of values, all
-        separated by whitespace (any number of spaces or tabs). For example:
-      
-      
-      
-      
-          confdir /etc/privoxy
-      
-
-      
-        Assigns the value /etc/privoxy to the option
-        confdir and thus indicates that the
-        configuration directory is named "/etc/privoxy/".
-      
-      
-        All options in the config file except for confdir and logdir are
-        optional. Watch out in the below description for what happens if you
-        leave them unset.
-      
-      
-        The main config file controls all aspects of Privoxy's operation that are not location
-        dependent (i.e. they apply universally, no matter where you may be
-        surfing). Like the filter and action files, the config file is a
-        plain text file and can be modified with a text editor like emacs,
-        vim or notepad.exe.
-      
-      
-        
-          7.1. Local Set-up Documentation
-        
-        
-          If you intend to operate Privoxy
-          for more users than just yourself, it might be a good idea to let
-          them know how to reach you, what you block and why you do that,
-          your policies, etc.
-        
-        
-          
-            7.1.1. user-manual
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  Location of the Privoxy
-                  User Manual.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  A fully qualified URI
-                
-              
-              
-                Default value:
-              
-              
-                
-                  Unset
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  http://www.privoxy.org/version/user-manual/ will be
-                  used, where version is
-                  the Privoxy version.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  The User Manual URI is the single best source of
-                  information on Privoxy,
-                  and is used for help links from some of the internal CGI
-                  pages. The manual itself is normally packaged with the
-                  binary distributions, so you probably want to set this to a
-                  locally installed copy.
-                
-                
-                  Examples:
-                
-                
-                  The best all purpose solution is simply to put the full
-                  local PATH to where the User Manual is located:
-                
-                
-                
-                
-                  
-                    
+                
+              
-+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  td.c5 {font-weight: bold}
+  table.c4 {background-color: #E0E0E0}
+  tt.c3 {font-style: italic}
+  span.c2 {font-style: italic}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy 3.0.18 User Manual
Prev Next
+    
+  
+
+  
+    7. The Main Configuration
+    File
+
+    By default, the main configuration file is named config, with the exception of Windows, where it is named
+    config.txt. Configuration lines consist of an
+    initial keyword followed by a list of values, all separated by whitespace
+    (any number of spaces or tabs). For example:
+
+      confdir /etc/privoxy
+
+    Assigns the value /etc/privoxy to the option
+    confdir and thus indicates that the
+    configuration directory is named "/etc/privoxy/".
+
+    All options in the config file except for confdir and logdir are optional.
+    Watch out in the below description for what happens if you leave them
+    unset.
+
+    The main config file controls all aspects of Privoxy's operation that are not location dependent
+    (i.e. they apply universally, no matter where you may be surfing). Like
+    the filter and action files, the config file is a plain text file and can
+    be modified with a text editor like emacs, vim or notepad.exe.
+
+    
+      7.1. Local
+      Set-up Documentation
+
+      If you intend to operate Privoxy
+      for more users than just yourself, it might be a good idea to let them
+      know how to reach you, what you block and why you do that, your
+      policies, etc.
+
+      
+        7.1.1.
+        user-manual
+
+        
+          
+            Specifies:
+
+            
+              Location of the Privoxy
+              User Manual.
+            
+
+            Type of value:
+
+            
+              A fully qualified URI
+            
+
+            Default value:
+
+            
+              Unset
+            
+
+            Effect if unset:
+
+            
+              http://www.privoxy.org/version/user-manual/ will be used,
+              where version is the
+              Privoxy version.
+            
+
+            Notes:
+
+            
+              The User Manual URI is the single best source of information
+              on Privoxy, and is used for
+              help links from some of the internal CGI pages. The manual
+              itself is normally packaged with the binary distributions, so
+              you probably want to set this to a locally installed copy.
+
+              Examples:
+
+              The best all purpose solution is simply to put the full
+              local PATH to where the User Manual is located:
+
+              
+                
+                  
-                  
-                
+                       user-manual  /usr/share/doc/privoxy/user-manual
 
-                    
+                  
 
-                
-                  The User Manual is then available to anyone with access to
-                  Privoxy, by following the
-                  built-in URL: http://config.privoxy.org/user-manual/ (or
-                  the shortcut: http://p.p/user-manual/).
-                
-                
-                  If the documentation is not on the local system, it can be
-                  accessed from a remote server, as:
-                
-                
-                
-                
-                  
-                    
-+              The User Manual is then available to anyone with access to
+              Privoxy, by following the
+              built-in URL: http://config.privoxy.org/user-manual/ (or the
+              shortcut: http://p.p/user-manual/).
+
+              If the documentation is not on the local system, it can be
+              accessed from a remote server, as:
+
+              
+                
+                  
+                
+              
+                       user-manual  http://example.com/privoxy/user-manual/
 
+                  
+
+              
+                
+                  
+                    
+                  
+
+                  
+                    Warning

+                      If set, this option should be the first option in the config
+                      file, because it is used while the config file
+                      is being read on start-up.
                     
                   
                 
-
-                
-                  
-                    
-                      
-                    
-                    
-                      
-                    
-                  
-                        Warning
-                      

-                        
-                          If set, this option should be the first option in
-                          the config file, because it is used
-                          while the config file is being read on start-up.
-                        
-                      
-                
-              
-            
-          
+              
+            
+          
         
-        
-          
-            7.1.2. trust-info-url
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  A URL to be displayed in the error page that users will see
-                  if access to an untrusted page is denied.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  URL
-                
-              
-              
-                Default value:
-              
-              
-                
-                  Unset
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  No links are displayed on the "untrusted" error page.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  The value of this option only matters if the experimental
-                  trust mechanism has been activated. (See trustfile below.)
-                
-                
-                  If you use the trust mechanism, it is a good idea to write
-                  up some on-line documentation about your trust policy and
-                  to specify the URL(s) here. Use multiple times for multiple
-                  URLs.
-                
-                
-                  The URL(s) should be added to the trustfile as well, so
-                  users don't end up locked out from the information on why
-                  they were locked out in the first place!
-                
-              
-            
-          
+      
+
+      
+        7.1.2.
+        trust-info-url
+
+        
+          
+            Specifies:
+
+            
+              A URL to be displayed in the error page that users will see
+              if access to an untrusted page is denied.
+            
+
+            Type of value:
+
+            
+              URL
+            
+
+            Default value:
+
+            
+              Unset
+            
+
+            Effect if unset:
+
+            
+              No links are displayed on the "untrusted" error page.
+            
+
+            Notes:
+
+            
+              The value of this option only matters if the experimental
+              trust mechanism has been activated. (See trustfile below.)
+
+              If you use the trust mechanism, it is a good idea to write
+              up some on-line documentation about your trust policy and to
+              specify the URL(s) here. Use multiple times for multiple
+              URLs.
+
+              The URL(s) should be added to the trustfile as well, so
+              users don't end up locked out from the information on why they
+              were locked out in the first place!
+            
+          
         
-        
-          
-            7.1.3. admin-address
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  An email address to reach the Privoxy administrator.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  Email address
-                
-              
-              
-                Default value:
-              
-              
-                
-                  Unset
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  No email address is displayed on error pages and the CGI
-                  user interface.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  If both admin-address and proxy-info-url are unset, the whole
-                  "Local Privoxy Support" box on all generated pages will not
-                  be shown.
-                
-              
-            
-          
+      
+
+      
+        7.1.3.
+        admin-address
+
+        
+          
+            Specifies:
+
+            
+              An email address to reach the Privoxy administrator.
+            
+
+            Type of value:
+
+            
+              Email address
+            
+
+            Default value:
+
+            
+              Unset
+            
+
+            Effect if unset:
+
+            
+              No email address is displayed on error pages and the CGI
+              user interface.
+            
+
+            Notes:
+
+            
+              If both admin-address and
+              proxy-info-url are unset, the whole
+              "Local Privoxy Support" box on all generated pages will not be
+              shown.
+            
+          
         
-        
-          
-            7.1.4. proxy-info-url
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  A URL to documentation about the local Privoxy setup, configuration or
-                  policies.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  URL
-                
-              
-              
-                Default value:
-              
-              
-                
-                  Unset
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  No link to local documentation is displayed on error pages
-                  and the CGI user interface.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  If both admin-address and proxy-info-url are unset, the whole
-                  "Local Privoxy Support" box on all generated pages will not
-                  be shown.
-                
-                
-                  This URL shouldn't be blocked ;-)
-                
-              
-            
-          
+      
+
+      
+        7.1.4.
+        proxy-info-url
+
+        
+          
+            Specifies:
+
+            
+              A URL to documentation about the local Privoxy setup, configuration or
+              policies.
+            
+
+            Type of value:
+
+            
+              URL
+            
+
+            Default value:
+
+            
+              Unset
+            
+
+            Effect if unset:
+
+            
+              No link to local documentation is displayed on error pages
+              and the CGI user interface.
+            
+
+            Notes:
+
+            
+              If both admin-address and
+              proxy-info-url are unset, the whole
+              "Local Privoxy Support" box on all generated pages will not be
+              shown.
+
+              This URL shouldn't be blocked ;-)
+            
+          
         
       
-      
-        
-          7.2. Configuration and Log File
-          Locations
-        
-        
-          Privoxy can (and normally does)
-          use a number of other files for additional configuration, help and
-          logging. This section of the configuration file tells Privoxy where to find those other files.
-        
-        
-          The user running Privoxy, must
-          have read permission for all configuration files, and write
-          permission to any files that would be modified, such as log files
-          and actions files.
-        
-        
-          
-            7.2.1. confdir
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  The directory where the other configuration files are
-                  located.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  Path name
-                
-              
-              
-                Default value:
-              
-              
-                
-                  /etc/privoxy (Unix) or Privoxy installation dir (Windows)
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  Mandatory
-                
-              
-              
-                Notes:
-              
-              
-                
-                  No trailing "/", please.
-                
-              
-            
-          
+    
+
+    
+      7.2.
+      Configuration and Log File Locations
+
+      Privoxy can (and normally does) use
+      a number of other files for additional configuration, help and logging.
+      This section of the configuration file tells Privoxy where to find those other files.
+
+      The user running Privoxy, must have
+      read permission for all configuration files, and write permission to
+      any files that would be modified, such as log files and actions
+      files.
+
+      
+        7.2.1.
+        confdir
+
+        
+          
+            Specifies:
+
+            
+              The directory where the other configuration files are
+              located.
+            
+
+            Type of value:
+
+            
+              Path name
+            
+
+            Default value:
+
+            
+              /etc/privoxy (Unix) or Privoxy installation dir (Windows)
+            
+
+            Effect if unset:
+
+            
+              Mandatory
+            
+
+            Notes:
+
+            
+              No trailing "/", please.
+            
+          
         
-        
-          
-            7.2.2. templdir
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  An alternative directory where the templates are loaded
-                  from.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  Path name
-                
-              
-              
-                Default value:
-              
-              
-                
-                  unset
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  The templates are assumed to be located in
-                  confdir/template.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Privoxy's original
-                  templates are usually overwritten with each update. Use
-                  this option to relocate customized templates that should be
-                  kept. As template variables might change between updates,
-                  you shouldn't expect templates to work with Privoxy releases other than the one
-                  they were part of, though.
-                
-              
-            
-          
+      
+
+      
+        7.2.2.
+        templdir
+
+        
+          
+            Specifies:
+
+            
+              An alternative directory where the templates are loaded
+              from.
+            
+
+            Type of value:
+
+            
+              Path name
+            
+
+            Default value:
+
+            
+              unset
+            
+
+            Effect if unset:
+
+            
+              The templates are assumed to be located in
+              confdir/template.
+            
+
+            Notes:
+
+            
+              Privoxy's original
+              templates are usually overwritten with each update. Use this
+              option to relocate customized templates that should be kept. As
+              template variables might change between updates, you shouldn't
+              expect templates to work with Privoxy releases other than the one they
+              were part of, though.
+            
+          
         
-        
-          
-            7.2.3. logdir
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  The directory where all logging takes place (i.e. where the
-                  logfile is located).
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  Path name
-                
-              
-              
-                Default value:
-              
-              
-                
-                  /var/log/privoxy (Unix) or Privoxy installation dir (Windows)
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  Mandatory
-                
-              
-              
-                Notes:
-              
-              
-                
-                  No trailing "/", please.
-                
-              
-            
-          
+      
+
+      
+        7.2.3. logdir
+
+        
+          
+            Specifies:
+
+            
+              The directory where all logging takes place (i.e. where the
+              logfile is located).
+            
+
+            Type of value:
+
+            
+              Path name
+            
+
+            Default value:
+
+            
+              /var/log/privoxy (Unix) or Privoxy installation dir (Windows)
+            
+
+            Effect if unset:
+
+            
+              Mandatory
+            
+
+            Notes:
+
+            
+              No trailing "/", please.
+            
+          
         
-        
-          
-            7.2.4. actionsfile
-          
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  The actions file(s) to use
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  Complete file name, relative to confdir
-                
-              
-              
-                Default values:
-              
-              
-                
-                  
-                    
-                      
-                    
-                    
-                      
-                    
-                    
-                      
-                    
-                  
-                
-                        
-                            match-all.action # Actions that are applied to all sites and maybe overruled later on.
-                        
-                      

-                        
-                            default.action   # Main actions file
-                        
-                      

-                        
-                            user.action      # User customizations
-                        
-                      
-              
-              
-                Effect if unset:
-              
-              
-                
-                  No actions are taken at all. More or less neutral proxying.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Multiple actionsfile lines are
-                  permitted, and are in fact recommended!
-                
-                
-                  The default values are default.action, which is the "main" actions file maintained by the
-                  developers, and user.action,
-                  where you can make your personal additions.
-                
-                
-                  Actions files contain all the per site and per URL
-                  configuration for ad blocking, cookie management, privacy
-                  considerations, etc. There is no point in using Privoxy without at least one
-                  actions file.
-                
-                
-                  Note that since Privoxy 3.0.7, the complete filename,
-                  including the ".action"
-                  extension has to be specified. The syntax change was
-                  necessary to be consistent with the other file options and
-                  to allow previously forbidden characters.
-                
-              
-            
-          
+      
+
+      
+        7.2.4.
+        actionsfile

+
+        
+          
+            Specifies:
+
+            
+              The actions file(s) to
+              use
+            
+
+            Type of value:
+
+            
+              Complete file name, relative to confdir
+            
+
+            Default values:
+
+            
+              
+                
+                  
+                    
+                  
+
+                  
+                    
+                  
+
+                  
+                    
+                  
+                
+              
+                      
+                        match-all.action # Actions that are applied to all sites and maybe overruled later on.
+                    

+                      
+                        default.action   # Main actions file
+                    

+                      
+                        user.action      # User customizations
+                    
+            
+
+            Effect if unset:
+
+            
+              No actions are taken at all. More or less neutral
+              proxying.
+            
+
+            Notes:
+
+            
+              Multiple actionsfile lines are
+              permitted, and are in fact recommended!
+
+              The default values are default.action, which is the "main" actions file maintained by the
+              developers, and user.action, where
+              you can make your personal additions.
+
+              Actions files contain all the per site and per URL
+              configuration for ad blocking, cookie management, privacy
+              considerations, etc. There is no point in using Privoxy without at least one actions
+              file.
+
+              Note that since Privoxy 3.0.7, the complete filename,
+              including the ".action" extension
+              has to be specified. The syntax change was necessary to be
+              consistent with the other file options and to allow previously
+              forbidden characters.
+            
+          
         
-        
-          
-            7.2.5. filterfile
-          
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  The filter file(s) to use
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  File name, relative to confdir
-                
-              
-              
-                Default value:
-              
-              
-                
-                  default.filter (Unix) or default.filter.txt (Windows)
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  No textual content filtering takes place, i.e. all +filter{name} actions in the actions
-                  files are turned neutral.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Multiple filterfile lines are
-                  permitted.
-                
-                
-                  The filter files contain
-                  content modification rules that use regular expressions. These rules
-                  permit powerful changes on the content of Web pages, and
-                  optionally the headers as well, e.g., you could try to
-                  disable your favorite JavaScript annoyances, re-write the
-                  actual displayed text, or just have some fun playing
-                  buzzword bingo with web pages.
-                
-                
-                  The +filter{name} actions rely on the
-                  relevant filter (name)
-                  to be defined in a filter file!
-                
-                
-                  A pre-defined filter file called default.filter that contains a number of
-                  useful filters for common problems is included in the
-                  distribution. See the section on the filter action for
-                  a list.
-                
-                
-                  It is recommended to place any locally adapted filters into
-                  a separate file, such as user.filter.
-                
-              
-            
-          
+      
+
+      
+        7.2.5.
+        filterfile

+
+        
+          
+            Specifies:
+
+            
+              The filter file(s) to use
+            
+
+            Type of value:
+
+            
+              File name, relative to confdir
+            
+
+            Default value:
+
+            
+              default.filter (Unix) or default.filter.txt
+              (Windows)
+            
+
+            Effect if unset:
+
+            
+              No textual content filtering takes place, i.e. all
+              +filter{name} actions in the actions files
+              are turned neutral.
+            
+
+            Notes:
+
+            
+              Multiple filterfile lines are
+              permitted.
+
+              The filter files contain
+              content modification rules that use regular expressions. These rules
+              permit powerful changes on the content of Web pages, and
+              optionally the headers as well, e.g., you could try to disable
+              your favorite JavaScript annoyances, re-write the actual
+              displayed text, or just have some fun playing buzzword bingo
+              with web pages.
+
+              The +filter{name} actions rely on the relevant
+              filter (name) to be defined in
+              a filter file!
+
+              A pre-defined filter file called default.filter that contains a number of useful
+              filters for common problems is included in the distribution.
+              See the section on the filter action for a
+              list.
+
+              It is recommended to place any locally adapted filters into
+              a separate file, such as user.filter.
+            
+          
         
-        
-          
-            7.2.6. logfile
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  The log file to use
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  File name, relative to logdir
-                
-              
-              
-                Default value:
-              
-              
-                
-                  Unset (commented
-                  out). When activated: logfile (Unix) or
-                  privoxy.log (Windows).
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  No logfile is written.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  The logfile is where all logging and error messages are
-                  written. The level of detail and number of messages are set
-                  with the debug option (see below).
-                  The logfile can be useful for tracking down a problem with
-                  Privoxy (e.g., it's not
-                  blocking an ad you think it should block) and it can help
-                  you to monitor what your browser is doing.
-                
-                
-                  Depending on the debug options below, the logfile may be a
-                  privacy risk if third parties can get access to it. As most
-                  users will never look at it, Privoxy 3.0.7 and later only log fatal
-                  errors by default.
-                
-                
-                  For most troubleshooting purposes, you will have to change
-                  that, please refer to the debugging section for details.
-                
-                
-                  Your logfile will grow indefinitely, and you will probably
-                  want to periodically remove it. On Unix systems, you can do
-                  this with a cron job (see "man
-                  cron"). For Red Hat based Linux distributions, a logrotate script has been included.
-                
-                
-                  Any log files must be writable by whatever user Privoxy is being run as (on
-                  Unix, default user id is "privoxy").
-                
-              
-            
-          
+      
+
+      
+        7.2.6.
+        logfile
+
+        
+          
+            Specifies:
+
+            
+              The log file to use
+            
+
+            Type of value:
+
+            
+              File name, relative to logdir
+            
+
+            Default value:
+
+            
+              Unset (commented
+              out). When activated: logfile (Unix) or privoxy.log (Windows).
+            
+
+            Effect if unset:
+
+            
+              No logfile is written.
+            
+
+            Notes:
+
+            
+              The logfile is where all logging and error messages are
+              written. The level of detail and number of messages are set
+              with the debug option (see below). The
+              logfile can be useful for tracking down a problem with
+              Privoxy (e.g., it's not
+              blocking an ad you think it should block) and it can help you
+              to monitor what your browser is doing.
+
+              Depending on the debug options below, the logfile may be a
+              privacy risk if third parties can get access to it. As most
+              users will never look at it, Privoxy 3.0.7 and later only log fatal
+              errors by default.
+
+              For most troubleshooting purposes, you will have to change
+              that, please refer to the debugging section for details.
+
+              Your logfile will grow indefinitely, and you will probably
+              want to periodically remove it. On Unix systems, you can do
+              this with a cron job (see "man
+              cron"). For Red Hat based Linux distributions, a
+              logrotate script has been included.
+
+              Any log files must be writable by whatever user Privoxy is being run as (on Unix, default
+              user id is "privoxy").
+            
+          
         
-        
-          
-            7.2.7. trustfile
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  The name of the trust file to use
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  File name, relative to confdir
-                
-              
-              
-                Default value:
-              
-              
-                
-                  Unset (commented
-                  out). When activated: trust (Unix) or trust.txt
-                  (Windows)
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  The entire trust mechanism is disabled.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  The trust mechanism is an experimental feature for building
-                  white-lists and should be used with care. It is NOT
-                  recommended for the casual user.
-                
-                
-                  If you specify a trust file, Privoxy will only allow access to
-                  sites that are specified in the trustfile. Sites can be
-                  listed in one of two ways:
-                
-                
-                  Prepending a ~ character limits
-                  access to this site only (and any sub-paths within this
-                  site), e.g. ~www.example.com
-                  allows access to ~www.example.com/features/news.html, etc.
-                
-                
-                  Or, you can designate sites as trusted referrers, by
-                  prepending the name with a +
-                  character. The effect is that access to untrusted sites
-                  will be granted -- but only if a link from this trusted
-                  referrer was used to get there. The link target will then
-                  be added to the "trustfile" so
-                  that future, direct accesses will be granted. Sites added
-                  via this mechanism do not become trusted referrers
-                  themselves (i.e. they are added with a ~ designation). There is a limit of 512 such
-                  entries, after which new entries will not be made.
-                
-                
-                  If you use the + operator in the
-                  trust file, it may grow considerably over time.
-                
-                
-                  It is recommended that Privoxy be compiled with the --disable-force, --disable-toggle and --disable-editor options, if this feature is
-                  to be used.
-                
-                
-                  Possible applications include limiting Internet access for
-                  children.
-                
-              
-            
-          
+      
+
+      
+        7.2.7.
+        trustfile
+
+        
+          
+            Specifies:
+
+            
+              The name of the trust file to use
+            
+
+            Type of value:
+
+            
+              File name, relative to confdir
+            
+
+            Default value:
+
+            
+              Unset (commented
+              out). When activated: trust (Unix) or trust.txt (Windows)
+            
+
+            Effect if unset:
+
+            
+              The entire trust mechanism is disabled.
+            
+
+            Notes:
+
+            
+              The trust mechanism is an experimental feature for building
+              white-lists and should be used with care. It is NOT recommended for the casual
+              user.
+
+              If you specify a trust file, Privoxy will only allow access to sites
+              that are specified in the trustfile. Sites can be listed in one
+              of two ways:
+
+              Prepending a ~ character limits
+              access to this site only (and any sub-paths within this site),
+              e.g. ~www.example.com allows access to
+              ~www.example.com/features/news.html,
+              etc.
+
+              Or, you can designate sites as trusted referrers, by prepending
+              the name with a + character. The
+              effect is that access to untrusted sites will be granted -- but
+              only if a link from this trusted referrer was used to get
+              there. The link target will then be added to the "trustfile" so that future, direct accesses will
+              be granted. Sites added via this mechanism do not become
+              trusted referrers themselves (i.e. they are added with a
+              ~ designation). There is a limit of
+              512 such entries, after which new entries will not be made.
+
+              If you use the + operator in the
+              trust file, it may grow considerably over time.
+
+              It is recommended that Privoxy be compiled with the --disable-force, --disable-toggle and --disable-editor options, if this feature is to
+              be used.
+
+              Possible applications include limiting Internet access for
+              children.
+            
+          
         
       
-      
-        
-          7.3. Debugging
-        
-        
-          These options are mainly useful when tracing a problem. Note that
-          you might also want to invoke Privoxy with the --no-daemon command line option when debugging.
-        
-        
-          
-            7.3.1. debug
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  Key values that determine what information gets logged.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  Integer values
-                
-              
-              
-                Default value:
-              
-              
-                
-                  0 (i.e.: only fatal errors (that cause Privoxy to exit) are
-                  logged)
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  Default value is used (see above).
-                
-              
-              
-                Notes:
-              
-              
-                
-                  The available debug levels are:
-                
-                
-                
-                
-                  
-                    
+                
+              
-+    
+
+    
+      7.3.
+      Debugging
+
+      These options are mainly useful when tracing a problem. Note that
+      you might also want to invoke Privoxy
+      with the --no-daemon command line option when
+      debugging.
+
+      
+        7.3.1. debug
+
+        
+          
+            Specifies:
+
+            
+              Key values that determine what information gets logged.
+            
+
+            Type of value:
+
+            
+              Integer values
+            
+
+            Default value:
+
+            
+              0 (i.e.: only fatal errors (that cause Privoxy to exit) are
+              logged)
+            
+
+            Effect if unset:
+
+            
+              Default value is used (see above).
+            
+
+            Notes:
+
+            
+              The available debug levels are:
+
+              
+                
+                  
-                  
-                
+                       debug     1 # Log the destination for each request Privoxy let through. See also debug 1024.
   debug     2 # show each connection status
@@ -1020,1491 +853,1236 @@ Transitional//EN""http://www.w3.org/TR/html4/loose.dtd">
   debug  8192 # Non-fatal errors
   debug 32768 # log all data read from the network
 
-                    
+                  
+
+              To select multiple debug levels, you can either add them or
+              use multiple debug lines.
+
+              A debug level of 1 is informative because it will show you
+              each request as it happens. 1, 1024, 4096 and 8192 are
+              recommended so that you will notice when things go
+              wrong. The other levels are probably only of interest if you
+              are hunting down a specific problem. They can produce a hell of
+              an output (especially 16).
+
+              Privoxy used to ship with
+              the debug levels recommended above enabled by default, but due
+              to privacy concerns 3.0.7 and later are configured to only log
+              fatal errors.
+
+              If you are used to the more verbose settings, simply enable
+              the debug lines below again.
+
+              If you want to use pure CLF (Common Log Format), you should
+              set "debug 512" ONLY and not enable anything
+              else.
+
+              Privoxy has a hard-coded
+              limit for the length of log messages. If it's reached, messages
+              are logged truncated and marked with "...
+              [too long, truncated]".
+
+              Please don't file any support requests without trying to
+              reproduce the problem with increased debug level first. Once
+              you read the log messages, you may even be able to solve the
+              problem on your own.
+            
+          
+        
+      
+
+      
+        7.3.2. single-threaded
+
+        
+          
+            Specifies:
+
+            
+              Whether to run only one server thread.
+            
+
+            Type of value:
+
+            
+              None
+            
+
+            Default value:
+
+            
+              Unset
+            
+
+            Effect if unset:
+
+            
+              Multi-threaded (or, where unavailable: forked) operation,
+              i.e. the ability to serve multiple requests simultaneously.
+            
+
+            Notes:
+
+            
+              This option is only there for debugging purposes.
+              It will drastically reduce
+              performance.
+            
+          
+        
+      
+
+      
+        7.3.3.
+        hostname
+
+        
+          
+            Specifies:
+
+            
+              The hostname shown on the CGI pages.
+            
+
+            Type of value:
+
+            
+              Text
+            
+
+            Default value:
+
+            
+              Unset
+            
+
+            Effect if unset:
+
+            
+              The hostname provided by the operating system is used.
+            
+
+            Notes:
+
+            
+              On some misconfigured systems resolving the hostname fails
+              or takes too much time and slows Privoxy down. Setting a fixed
+              hostname works around the problem.
+
+              In other circumstances it might be desirable to show a
+              hostname other than the one returned by the operating system.
+              For example if the system has several different hostnames and
+              you don't want to use the first one.
+
+              Note that Privoxy does not validate the specified hostname
+              value.
+            
+          
+        
+      
+    
+
+    
+      7.4.
+      Access Control and Security
+
+      This section of the config file controls the security-relevant
+      aspects of Privoxy's
+      configuration.
+
+      
+        7.4.1.
+        listen-address
+
+        
+          
+            Specifies:
+
+            
+              The address and TCP port on which Privoxy will listen for client
+              requests.
+            
+
+            Type of value:
+
+            
+              [IP-Address]:Port
+
+              [Hostname]:Port
+            
+
+            Default value:
+
+            
+              127.0.0.1:8118
+            
+
+            Effect if unset:
+
+            
+              Bind to 127.0.0.1 (IPv4 localhost), port 8118. This is
+              suitable and recommended for home users who run Privoxy on the same machine as their
+              browser.
+            
+
+            Notes:
+
+            
+              You will need to configure your browser(s) to this proxy
+              address and port.
+
+              If you already have another service running on port 8118, or
+              if you want to serve requests from other machines (e.g. on your
+              local network) as well, you will need to override the
+              default.
+
+              You can use this statement multiple times to make
+              Privoxy listen on more ports
+              or more IP addresses. Suitable if
+              your operating system does not support sharing IPv6 and IPv4
+              protocols on the same socket.
 
-                
-                  To select multiple debug levels, you can either add them or
-                  use multiple debug lines.
-                
-                
-                  A debug level of 1 is informative because it will show you
-                  each request as it happens. 1, 1024, 4096 and 8192 are
-                  recommended so that you will notice when things
-                  go wrong. The other levels are probably only of interest if
-                  you are hunting down a specific problem. They can produce a
-                  hell of an output (especially 16).
-                
-                
-                  Privoxy used to ship with
-                  the debug levels recommended above enabled by default, but
-                  due to privacy concerns 3.0.7 and later are configured to
-                  only log fatal errors.
-                
-                
-                  If you are used to the more verbose settings, simply enable
-                  the debug lines below again.
-                
-                
-                  If you want to use pure CLF (Common Log Format), you should
-                  set "debug 512" ONLY and not
-                  enable anything else.
-                
-                
-                  Privoxy has a hard-coded
-                  limit for the length of log messages. If it's reached,
-                  messages are logged truncated and marked with "... [too long, truncated]".
-                
-                
-                  Please don't file any support requests without trying to
-                  reproduce the problem with increased debug level first.
-                  Once you read the log messages, you may even be able to
-                  solve the problem on your own.
-                
-              
-            
-          
-        
-        
-          
-            7.3.2. single-threaded
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  Whether to run only one server thread.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  None
-                
-              
-              
-                Default value:
-              
-              
-                
-                  Unset
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  Multi-threaded (or, where unavailable: forked) operation,
-                  i.e. the ability to serve multiple requests simultaneously.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  This option is only there for debugging purposes. It will drastically
-                  reduce performance.
-                
-              
-            
-          
-        
-        
-          
-            7.3.3. hostname
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  The hostname shown on the CGI pages.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  Text
-                
-              
-              
-                Default value:
-              
-              
-                
-                  Unset
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  The hostname provided by the operating system is used.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  On some misconfigured systems resolving the hostname fails
-                  or takes too much time and slows Privoxy down. Setting a
-                  fixed hostname works around the problem.
-                
-                
-                  In other circumstances it might be desirable to show a
-                  hostname other than the one returned by the operating
-                  system. For example if the system has several different
-                  hostnames and you don't want to use the first one.
-                
-                
-                  Note that Privoxy does not validate the specified hostname
-                  value.
-                
-              
-            
-          
-        
-      
-      
-        
-          7.4. Access Control and Security
-        
-        
-          This section of the config file controls the security-relevant
-          aspects of Privoxy's
-          configuration.
-        
-        
-          
-            7.4.1. listen-address
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  The address and TCP port on which Privoxy will listen for client
-                  requests.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  [IP-Address]:Port
-                
-                
-                  [Hostname]:Port
-                
-              
-              
-                Default value:
-              
-              
-                
-                  127.0.0.1:8118
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  Bind to 127.0.0.1 (IPv4 localhost), port 8118. This is
-                  suitable and recommended for home users who run Privoxy on the same machine as
-                  their browser.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  You will need to configure your browser(s) to this proxy
-                  address and port.
-                
-                
-                  If you already have another service running on port 8118,
-                  or if you want to serve requests from other machines (e.g.
-                  on your local network) as well, you will need to override
-                  the default.
-                
-                
-                  You can use this statement multiple times to make Privoxy listen on more ports or
-                  more IP addresses. Suitable if
-                  your operating system does not support sharing IPv6 and IPv4
-                  protocols on the same socket.
-                
-                
-                  If a hostname is used instead of an IP address, Privoxy will try to resolve it
-                  to an IP address and if there are multiple, use the first
-                  one returned.
-                
-                
-                  If the address for the hostname isn't already known on the
-                  system (for example because it's in /etc/hostname), this
-                  may result in DNS traffic.
-                
-                
-                  If the specified address isn't available on the system, or
-                  if the hostname can't be resolved, Privoxy will fail to start.
-                
-                
-                  IPv6 addresses containing colons have to be quoted by
-                  brackets. They can only be used if Privoxy has been compiled with IPv6
-                  support. If you aren't sure if your version supports it,
-                  have a look at http://config.privoxy.org/show-status.
-                
-                
-                  Some operating systems will prefer IPv6 to IPv4 addresses
-                  even if the system has no IPv6 connectivity which is
-                  usually not expected by the user. Some even rely on DNS to
-                  resolve localhost which mean the "localhost" address used
-                  may not actually be local.
-                
-                
-                  It is therefore recommended to explicitly configure the
-                  intended IP address instead of relying on the operating
-                  system, unless there's a strong reason not to.
-                
-                
-                  If you leave out the address, Privoxy will bind to all IPv4
-                  interfaces (addresses) on your machine and may become
-                  reachable from the Internet and/or the local network. Be
-                  aware that some GNU/Linux distributions modify that
-                  behaviour without updating the documentation. Check for
-                  non-standard patches if your Privoxyversion behaves differently.
-                
-                
-                  If you configure Privoxyto
-                  be reachable from the network, consider using access control lists (ACL's, see
-                  below), and/or a firewall.
-                
-                
-                  If you open Privoxy to
-                  untrusted users, you will also want to make sure that the
-                  following actions are disabled: enable-edit-actions
-                  and enable-remote-toggle
-                
-                
-                  With the exception noted above, listening on multiple
-                  addresses is currently not supported by Privoxy directly. It can be done on
-                  most operating systems by letting a packet filter redirect
-                  request for certain addresses to Privoxy, though.
-                
-              
-              
-                Example:
-              
-              
-                
-                  Suppose you are running Privoxy on a machine which has the
-                  address 192.168.0.1 on your local private network
-                  (192.168.0.0) and has another outside connection with a
-                  different address. You want it to serve requests from
-                  inside only:
-                
-                
-                
-                
-                  
-                    
+                
+              
-+              If a hostname is used instead of an IP address, Privoxy will try to resolve it to an IP
+              address and if there are multiple, use the first one
+              returned.
+
+              If the address for the hostname isn't already known on the
+              system (for example because it's in /etc/hostname), this may
+              result in DNS traffic.
+
+              If the specified address isn't available on the system, or
+              if the hostname can't be resolved, Privoxy will fail to start.
+
+              IPv6 addresses containing colons have to be quoted by
+              brackets. They can only be used if Privoxy has been compiled with IPv6
+              support. If you aren't sure if your version supports it, have a
+              look at http://config.privoxy.org/show-status.
+
+              Some operating systems will prefer IPv6 to IPv4 addresses
+              even if the system has no IPv6 connectivity which is usually
+              not expected by the user. Some even rely on DNS to resolve
+              localhost which mean the "localhost" address used may not
+              actually be local.
+
+              It is therefore recommended to explicitly configure the
+              intended IP address instead of relying on the operating system,
+              unless there's a strong reason not to.
+
+              If you leave out the address, Privoxy will bind to all IPv4 interfaces
+              (addresses) on your machine and may become reachable from the
+              Internet and/or the local network. Be aware that some GNU/Linux
+              distributions modify that behaviour without updating the
+              documentation. Check for non-standard patches if your
+              Privoxyversion behaves
+              differently.
+
+              If you configure Privoxyto
+              be reachable from the network, consider using access control lists (ACL's, see below),
+              and/or a firewall.
+
+              If you open Privoxy to
+              untrusted users, you will also want to make sure that the
+              following actions are disabled: enable-edit-actions
+              and enable-remote-toggle
+
+              With the exception noted above, listening on multiple
+              addresses is currently not supported by Privoxy directly. It can be done on most
+              operating systems by letting a packet filter redirect request
+              for certain addresses to Privoxy, though.
+            
+
+            Example:
+
+            
+              Suppose you are running Privoxy on a machine which has the address
+              192.168.0.1 on your local private network (192.168.0.0) and has
+              another outside connection with a different address. You want
+              it to serve requests from inside only:
+
+              
+                
+                  
-                  
-                
+                       listen-address  192.168.0.1:8118
 
-                    
+                  
 
-                
-                  Suppose you are running Privoxy on an IPv6-capable machine and
-                  you want it to listen on the IPv6 address of the loopback
-                  device:
-                
-                
-                
-                
-                  
-                    
+                
+              
-+              Suppose you are running Privoxy on an IPv6-capable machine and you
+              want it to listen on the IPv6 address of the loopback
+              device:
+
+              
+                
+                  
-                  
-                
+                       listen-address [::1]:8118
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            7.4.2. toggle
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  Initial state of "toggle" status
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  1 or 0
-                
-              
-              
-                Default value:
-              
-              
-                
-                  1
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  Act as if toggled on
-                
-              
-              
-                Notes:
-              
-              
-                
-                  If set to 0, Privoxy will
-                  start in "toggled off" mode,
-                  i.e. mostly behave like a normal, content-neutral proxy
-                  with both ad blocking and content filtering disabled. See
-                  enable-remote-toggle below.
-                
-                
-                  The windows version will only display the toggle icon in
-                  the system tray if this option is present.
-                
-              
-            
-          
+      
+
+      
+        7.4.2. toggle
+
+        
+          
+            Specifies:
+
+            
+              Initial state of "toggle" status
+            
+
+            Type of value:
+
+            
+              1 or 0
+            
+
+            Default value:
+
+            
+              1
+            
+
+            Effect if unset:
+
+            
+              Act as if toggled on
+            
+
+            Notes:
+
+            
+              If set to 0, Privoxy will
+              start in "toggled off" mode, i.e.
+              mostly behave like a normal, content-neutral proxy with both ad
+              blocking and content filtering disabled. See enable-remote-toggle below.
+
+              The windows version will only display the toggle icon in the
+              system tray if this option is present.
+            
+          
         
-        
-          
-            7.4.3. enable-remote-toggle
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  Whether or not the web-based
-                  toggle feature may be used
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  0 or 1
-                
-              
-              
-                Default value:
-              
-              
-                
-                  0
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  The web-based toggle feature is disabled.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  When toggled off, Privoxy
-                  mostly acts like a normal, content-neutral proxy, i.e.
-                  doesn't block ads or filter content.
-                
-                
-                  Access to the toggle feature can not be controlled separately by
-                  "ACLs" or HTTP authentication,
-                  so that everybody who can access Privoxy (see "ACLs" and listen-address above) can toggle it for all
-                  users. So this option is not recommended for multi-user
-                  environments with untrusted users.
-                
-                
-                  Note that malicious client side code (e.g Java) is also
-                  capable of using this option.
-                
-                
-                  As a lot of Privoxy users
-                  don't read documentation, this feature is disabled by
-                  default.
-                
-                
-                  Note that you must have compiled Privoxy with support for this feature,
-                  otherwise this option has no effect.
-                
-              
-            
-          
+      
+
+      
+        7.4.3. enable-remote-toggle
+
+        
+          
+            Specifies:
+
+            
+              Whether or not the web-based
+              toggle feature may be used
+            
+
+            Type of value:
+
+            
+              0 or 1
+            
+
+            Default value:
+
+            
+              0
+            
+
+            Effect if unset:
+
+            
+              The web-based toggle feature is disabled.
+            
+
+            Notes:
+
+            
+              When toggled off, Privoxy
+              mostly acts like a normal, content-neutral proxy, i.e. doesn't
+              block ads or filter content.
+
+              Access to the toggle feature can not be controlled separately by
+              "ACLs" or HTTP authentication, so
+              that everybody who can access Privoxy (see "ACLs" and listen-address above) can toggle it for all
+              users. So this option is not
+              recommended for multi-user environments with untrusted
+              users.
+
+              Note that malicious client side code (e.g Java) is also
+              capable of using this option.
+
+              As a lot of Privoxy users
+              don't read documentation, this feature is disabled by
+              default.
+
+              Note that you must have compiled Privoxy with support for this feature,
+              otherwise this option has no effect.
+            
+          
         
-        
-          
-            7.4.4.
-            enable-remote-http-toggle
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  Whether or not Privoxy recognizes special HTTP headers to
-                  change its behaviour.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  0 or 1
-                
-              
-              
-                Default value:
-              
-              
-                
-                  0
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  Privoxy ignores special HTTP headers.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  When toggled on, the client can change Privoxy's behaviour by setting special
-                  HTTP headers. Currently the only supported special header
-                  is "X-Filter: No", to disable
-                  filtering for the ongoing request, even if it is enabled in
-                  one of the action files.
-                
-                
-                  This feature is disabled by default. If you are using Privoxy in a environment with
-                  trusted clients, you may enable this feature at your
-                  discretion. Note that malicious client side code (e.g Java)
-                  is also capable of using this feature.
-                
-                
-                  This option will be removed in future releases as it has
-                  been obsoleted by the more general header taggers.
-                
-              
-            
-          
+      
+
+      
+        7.4.4. enable-remote-http-toggle
+
+        
+          
+            Specifies:
+
+            
+              Whether or not Privoxy recognizes special HTTP headers to
+              change its behaviour.
+            
+
+            Type of value:
+
+            
+              0 or 1
+            
+
+            Default value:
+
+            
+              0
+            
+
+            Effect if unset:
+
+            
+              Privoxy ignores special HTTP headers.
+            
+
+            Notes:
+
+            
+              When toggled on, the client can change Privoxy's behaviour by setting special
+              HTTP headers. Currently the only supported special header is
+              "X-Filter: No", to disable filtering
+              for the ongoing request, even if it is enabled in one of the
+              action files.
+
+              This feature is disabled by default. If you are using
+              Privoxy in a environment with
+              trusted clients, you may enable this feature at your
+              discretion. Note that malicious client side code (e.g Java) is
+              also capable of using this feature.
+
+              This option will be removed in future releases as it has
+              been obsoleted by the more general header taggers.
+            
+          
         
-        
-          
-            7.4.5. enable-edit-actions
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  Whether or not the web-based actions file editor may be used
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  0 or 1
-                
-              
-              
-                Default value:
-              
-              
-                
-                  0
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  The web-based actions file editor is disabled.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Access to the editor can not be controlled separately by "ACLs" or HTTP authentication, so that
-                  everybody who can access Privoxy (see "ACLs" and listen-address above) can modify its
-                  configuration for all users.
-                
-                
-                  This option is not recommended for environments with
-                  untrusted users and as a lot of Privoxy users don't read
-                  documentation, this feature is disabled by default.
-                
-                
-                  Note that malicious client side code (e.g Java) is also
-                  capable of using the actions editor and you shouldn't
-                  enable this options unless you understand the consequences
-                  and are sure your browser is configured correctly.
-                
-                
-                  Note that you must have compiled Privoxy with support for this feature,
-                  otherwise this option has no effect.
-                
-              
-            
-          
+      
+
+      
+        7.4.5. enable-edit-actions
+
+        
+          
+            Specifies:
+
+            
+              Whether or not the web-based
+              actions file editor may be used
+            
+
+            Type of value:
+
+            
+              0 or 1
+            
+
+            Default value:
+
+            
+              0
+            
+
+            Effect if unset:
+
+            
+              The web-based actions file editor is disabled.
+            
+
+            Notes:
+
+            
+              Access to the editor can not be controlled separately by
+              "ACLs" or HTTP authentication, so
+              that everybody who can access Privoxy (see "ACLs" and listen-address above) can modify its
+              configuration for all users.
+
+              This option is not
+              recommended for environments with untrusted users and as
+              a lot of Privoxy users don't
+              read documentation, this feature is disabled by default.
+
+              Note that malicious client side code (e.g Java) is also
+              capable of using the actions editor and you shouldn't enable
+              this options unless you understand the consequences and are
+              sure your browser is configured correctly.
+
+              Note that you must have compiled Privoxy with support for this feature,
+              otherwise this option has no effect.
+            
+          
         
-        
-          
-            7.4.6. enforce-blocks
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  Whether the user is allowed to ignore blocks and can "go there anyway".
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  0 or 1
-                
-              
-              
-                Default value:
-              
-              
-                
-                  0
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  Blocks are not enforced.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Privoxy is mainly used to
-                  block and filter requests as a service to the user, for
-                  example to block ads and other junk that clogs the pipes.
-                  Privoxy's configuration
-                  isn't perfect and sometimes innocent pages are blocked. In
-                  this situation it makes sense to allow the user to enforce
-                  the request and have Privoxy ignore the block.
-                
-                
-                  In the default configuration Privoxy's "Blocked" page contains a "go there anyway" link to adds a special
-                  string (the force prefix) to the request URL. If that link
-                  is used, Privoxy will
-                  detect the force prefix, remove it again and let the
-                  request pass.
-                
-                
-                  Of course Privoxy can also
-                  be used to enforce a network policy. In that case the user
-                  obviously should not be able to bypass any blocks, and
-                  that's what the "enforce-blocks"
-                  option is for. If it's enabled, Privoxy hides the "go there anyway" link. If the user adds the
-                  force prefix by hand, it will not be accepted and the
-                  circumvention attempt is logged.
-                
-              
-              
-                Examples:
-              
-              
-                
-                  enforce-blocks 1
-                
-              
-            
-          
+      
+
+      
+        7.4.6.
+        enforce-blocks
+
+        
+          
+            Specifies:
+
+            
+              Whether the user is allowed to ignore blocks and can
+              "go there anyway".
+            
+
+            Type of value:
+
+            
+              0 or 1
+            
+
+            Default value:
+
+            
+              0
+            
+
+            Effect if unset:
+
+            
+              Blocks are not enforced.
+            
+
+            Notes:
+
+            
+              Privoxy is mainly used to
+              block and filter requests as a service to the user, for example
+              to block ads and other junk that clogs the pipes. Privoxy's configuration isn't perfect and
+              sometimes innocent pages are blocked. In this situation it
+              makes sense to allow the user to enforce the request and have
+              Privoxy ignore the block.
+
+              In the default configuration Privoxy's "Blocked" page contains a "go there anyway" link to adds a special string
+              (the force prefix) to the request URL. If that link is used,
+              Privoxy will detect the force
+              prefix, remove it again and let the request pass.
+
+              Of course Privoxy can also
+              be used to enforce a network policy. In that case the user
+              obviously should not be able to bypass any blocks, and that's
+              what the "enforce-blocks" option is
+              for. If it's enabled, Privoxy
+              hides the "go there anyway" link. If
+              the user adds the force prefix by hand, it will not be accepted
+              and the circumvention attempt is logged.
+            
+
+            Examples:
+
+            
+              enforce-blocks 1
+            
+          
         
-        
-          
-            7.4.7. ACLs: permit-access and deny-access
-          
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  Who can access what.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  src_addr[:port][/src_masklen] [dst_addr[:port][/dst_masklen]]
-                
-                
-                  Where src_addr and dst_addr are IPv4 addresses
-                  in dotted decimal notation or valid DNS names, port is a port number, and src_masklen and dst_masklen are subnet masks in
-                  CIDR notation, i.e. integer values from 2 to 30
-                  representing the length (in bits) of the network address.
-                  The masks and the whole destination part are optional.
-                
-                
-                  If your system implements RFC
-                  3493, then src_addr
-                  and dst_addr can be
-                  IPv6 addresses delimeted by brackets, port can be a number or a service
-                  name, and src_masklen
-                  and dst_masklen can be
-                  a number from 0 to 128.
-                
-              
-              
-                Default value:
-              
-              
-                
-                  Unset
-                
-                
-                  If no port is
-                  specified, any port will match. If no src_masklen or src_masklen is given, the
-                  complete IP address has to match (i.e. 32 bits for IPv4 and
-                  128 bits for IPv6).
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  Don't restrict access further than implied by listen-address
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Access controls are included at the request of ISPs and
-                  systems administrators, and are not usually needed by individual
-                  users. For a typical home user, it will normally
-                  suffice to ensure that Privoxy only listens on the localhost
-                  (127.0.0.1) or internal (home) network address by means of
-                  the listen-address option.
-                
-                
-                  Please see the warnings in the FAQ that Privoxy is not intended to be a
-                  substitute for a firewall or to encourage anyone to defer
-                  addressing basic security weaknesses.
-                
-                
-                  Multiple ACL lines are OK. If any ACLs are specified, Privoxy only talks to IP
-                  addresses that match at least one permit-access line and don't match any
-                  subsequent deny-access line. In
-                  other words, the last match wins, with the default being
-                  deny-access.
-                
-                
-                  If Privoxy is using a
-                  forwarder (see forward below) for
-                  a particular destination URL, the dst_addr that is examined is the
-                  address of the forwarder and NOT the address of the ultimate
-                  target. This is necessary because it may be impossible for
-                  the local Privoxy to
-                  determine the IP address of the ultimate target (that's
-                  often what gateways are used for).
-                
-                
-                  You should prefer using IP addresses over DNS names,
-                  because the address lookups take time. All DNS names must
-                  resolve! You can not use domain patterns like "*.org" or partial domain names. If a
-                  DNS name resolves to multiple IP addresses, only the first
-                  one is used.
-                
-                
-                  Some systems allow IPv4 clients to connect to IPv6 server
-                  sockets. Then the client's IPv4 address will be translated
-                  by the system into IPv6 address space with special prefix
-                  ::ffff:0:0/96 (so called IPv4 mapped IPv6 address). Privoxy can handle it and maps
-                  such ACL addresses automatically.
-                
-                
-                  Denying access to particular sites by ACL may have
-                  undesired side effects if the site in question is hosted on
-                  a machine which also hosts other sites (most sites are).
-                
-              
-              
-                Examples:
-              
-              
-                
-                  Explicitly define the default behavior if no ACL and listen-address are set: "localhost" is OK. The absence of a dst_addr implies that all
-                  destination addresses are OK:
-                
-                
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        7.4.7. ACLs: permit-access
+        and deny-access

+
+        
+          
+            Specifies:
+
+            
+              Who can access what.
+            
+
+            Type of value:
+
+            
+              src_addr[:port][/src_masklen] [dst_addr[:port][/dst_masklen]]
+
+              Where src_addr and
+              dst_addr are IPv4 addresses in
+              dotted decimal notation or valid DNS names, port is a port number, and src_masklen and dst_masklen are subnet masks in CIDR
+              notation, i.e. integer values from 2 to 30 representing the
+              length (in bits) of the network address. The masks and the
+              whole destination part are optional.
+
+              If your system implements RFC
+              3493, then src_addr and
+              dst_addr can be IPv6 addresses
+              delimeted by brackets, port can
+              be a number or a service name, and src_masklen and dst_masklen can be a number from 0 to
+              128.
+            
+
+            Default value:
+
+            
+              Unset
+
+              If no port is specified, any
+              port will match. If no src_masklen or src_masklen is given, the complete IP
+              address has to match (i.e. 32 bits for IPv4 and 128 bits for
+              IPv6).
+            
+
+            Effect if unset:
+
+            
+              Don't restrict access further than implied by listen-address
+            
+
+            Notes:
+
+            
+              Access controls are included at the request of ISPs and
+              systems administrators, and are not usually needed by individual
+              users. For a typical home user, it will normally suffice
+              to ensure that Privoxy only
+              listens on the localhost (127.0.0.1) or internal (home) network
+              address by means of the listen-address option.
+
+              Please see the warnings in the FAQ that Privoxy is not intended to be a substitute
+              for a firewall or to encourage anyone to defer addressing basic
+              security weaknesses.
+
+              Multiple ACL lines are OK. If any ACLs are specified,
+              Privoxy only talks to IP
+              addresses that match at least one permit-access line and don't match any
+              subsequent deny-access line. In other
+              words, the last match wins, with the default being deny-access.
+
+              If Privoxy is using a
+              forwarder (see forward below) for a
+              particular destination URL, the dst_addr that is examined is the address
+              of the forwarder and NOT the address of the ultimate
+              target. This is necessary because it may be impossible for the
+              local Privoxy to determine the
+              IP address of the ultimate target (that's often what gateways
+              are used for).
+
+              You should prefer using IP addresses over DNS names, because
+              the address lookups take time. All DNS names must resolve! You
+              can not use domain
+              patterns like "*.org" or partial
+              domain names. If a DNS name resolves to multiple IP addresses,
+              only the first one is used.
+
+              Some systems allow IPv4 clients to connect to IPv6 server
+              sockets. Then the client's IPv4 address will be translated by
+              the system into IPv6 address space with special prefix
+              ::ffff:0:0/96 (so called IPv4 mapped IPv6 address).
+              Privoxy can handle it and maps
+              such ACL addresses automatically.
+
+              Denying access to particular sites by ACL may have undesired
+              side effects if the site in question is hosted on a machine
+              which also hosts other sites (most sites are).
+            
+
+            Examples:
+
+            
+              Explicitly define the default behavior if no ACL and
+              listen-address are set: "localhost" is OK. The absence of a dst_addr implies that all destination addresses are
+              OK:
+
+              
+                
+                  
-                  
-                
+                       permit-access  localhost
 
-                    
+                  
 
-                
-                  Allow any host on the same class C subnet as
-                  www.privoxy.org access to nothing but www.example.com (or
-                  other domains hosted on the same system):
-                
-                
-                
-                
-                  
-                    
+                
+              
-+              Allow any host on the same class C subnet as www.privoxy.org
+              access to nothing but www.example.com (or other domains hosted
+              on the same system):
+
+              
+                
+                  
-                  
-                
+                       permit-access  www.privoxy.org/24 www.example.com/32
 
-                    
+                  
 
-                
-                  Allow access from any host on the 26-bit subnet
-                  192.168.45.64 to anywhere, with the exception that
-                  192.168.45.73 may not access the IP address behind
-                  www.dirty-stuff.example.com:
-                
-                
-                
-                
-                  
-                    
+                
+              
-+              Allow access from any host on the 26-bit subnet
+              192.168.45.64 to anywhere, with the exception that
+              192.168.45.73 may not access the IP address behind
+              www.dirty-stuff.example.com:
+
+              
+                
+                  
-                  
-                
+                       permit-access  192.168.45.64/26
   deny-access    192.168.45.73    www.dirty-stuff.example.com
 
-                    
+                  
 
-                
-                  Allow access from the IPv4 network 192.0.2.0/24 even if
-                  listening on an IPv6 wild card address (not supported on
-                  all platforms):
-                
-                
-                
-                
-                  
-                    
+                
+              
-+              Allow access from the IPv4 network 192.0.2.0/24 even if
+              listening on an IPv6 wild card address (not supported on all
+              platforms):
+
+              
+                
+                  
-                  
-                
+                       permit-access  192.0.2.0/24
 
-                    
+                  
 
-                
-                  This is equivalent to the following line even if listening
-                  on an IPv4 address (not supported on all platforms):
-                
-                
-                
-                
-                  
-                    
+                
+              
-+              This is equivalent to the following line even if listening
+              on an IPv4 address (not supported on all platforms):
+
+              
+                
+                  
-                  
-                
+                       permit-access  [::ffff:192.0.2.0]/120
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            7.4.8. buffer-limit
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  Maximum size of the buffer for content filtering.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  Size in Kbytes
-                
-              
-              
-                Default value:
-              
-              
-                
-                  4096
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  Use a 4MB (4096 KB) limit.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  For content filtering, i.e. the +filter and +deanimate-gif actions, it is necessary that
-                  Privoxy buffers the entire
-                  document body. This can be potentially dangerous, since a
-                  server could just keep sending data indefinitely and wait
-                  for your RAM to exhaust -- with nasty consequences. Hence
-                  this option.
-                
-                
-                  When a document buffer size reaches the buffer-limit, it is flushed to the client
-                  unfiltered and no further attempt to filter the rest of the
-                  document is made. Remember that there may be multiple
-                  threads running, which might require up to buffer-limit Kbytes each, unless you
-                  have enabled "single-threaded"
-                  above.
-                
-              
-            
-          
+      
+
+      
+        7.4.8.
+        buffer-limit
+
+        
+          
+            Specifies:
+
+            
+              Maximum size of the buffer for content filtering.
+            
+
+            Type of value:
+
+            
+              Size in Kbytes
+            
+
+            Default value:
+
+            
+              4096
+            
+
+            Effect if unset:
+
+            
+              Use a 4MB (4096 KB) limit.
+            
+
+            Notes:
+
+            
+              For content filtering, i.e. the +filter and +deanimate-gif actions, it is necessary that
+              Privoxy buffers the entire
+              document body. This can be potentially dangerous, since a
+              server could just keep sending data indefinitely and wait for
+              your RAM to exhaust -- with nasty consequences. Hence this
+              option.
+
+              When a document buffer size reaches the buffer-limit, it is flushed to the client
+              unfiltered and no further attempt to filter the rest of the
+              document is made. Remember that there may be multiple threads
+              running, which might require up to buffer-limit Kbytes each, unless you have enabled
+              "single-threaded" above.
+            
+          
         
       
-      
-        
-          7.5. Forwarding
-        
-        
-          This feature allows routing of HTTP requests through a chain of
-          multiple proxies.
-        
-        
-          Forwarding can be used to chain Privoxy with a caching proxy to
-          speed up browsing. Using a parent proxy may also be necessary if
-          the machine that Privoxy runs on
-          has no direct Internet access.
-        
-        
-          Note that parent proxies can severely decrease your privacy level.
-          For example a parent proxy could add your IP address to the request
-          headers and if it's a caching proxy it may add the "Etag" header to revalidation requests again, even
-          though you configured Privoxy to remove it. It may also ignore
-          Privoxy's header time randomization and use the original values
-          which could be used by the server as cookie replacement to track
-          your steps between visits.
-        
-        
-          Also specified here are SOCKS proxies. Privoxy supports the SOCKS 4 and SOCKS 4A
-          protocols.
-        
-        
-          
-            7.5.1. forward
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  To which parent HTTP proxy specific requests should be
-                  routed.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  target_pattern http_parent[:port]
-                
-                
-                  where target_pattern is
-                  a URL pattern
-                  that specifies to which requests (i.e. URLs) this forward
-                  rule shall apply. Use / to denote
-                  "all URLs". http_parent[:port] is the DNS name or IP
-                  address of the parent HTTP proxy through which the requests
-                  should be forwarded, optionally followed by its listening
-                  port (default: 8000). Use a single dot (.) to denote "no
-                  forwarding".
-                
-              
-              
-                Default value:
-              
-              
-                
-                  Unset
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  Don't use parent HTTP proxies.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  If http_parent is ".", then requests are not forwarded
-                  to another HTTP proxy but are made directly to the web
-                  servers.
-                
-                
-                  http_parent can be a
-                  numerical IPv6 address (if RFC
-                  3493 is implemented). To prevent clashes with the port
-                  delimiter, the whole IP address has to be put into
-                  brackets. On the other hand a target_pattern containing an IPv6
-                  address has to be put into angle brackets (normal brackets
-                  are reserved for regular expressions already).
-                
-                
-                  Multiple lines are OK, they are checked in sequence, and
-                  the last match wins.
-                
-              
-              
-                Examples:
-              
-              
-                
-                  Everything goes to an example parent proxy, except SSL on
-                  port 443 (which it doesn't handle):
-                
-                
-                
-                
-                  
-                    
+                
+              
-+    
+
+    
+      7.5.
+      Forwarding
+
+      This feature allows routing of HTTP requests through a chain of
+      multiple proxies.
+
+      Forwarding can be used to chain Privoxy with a caching proxy to
+      speed up browsing. Using a parent proxy may also be necessary if the
+      machine that Privoxy runs on has no
+      direct Internet access.
+
+      Note that parent proxies can severely decrease your privacy level.
+      For example a parent proxy could add your IP address to the request
+      headers and if it's a caching proxy it may add the "Etag" header to revalidation requests again, even
+      though you configured Privoxy to remove it. It may also ignore
+      Privoxy's header time randomization and use the original values which
+      could be used by the server as cookie replacement to track your steps
+      between visits.
+
+      Also specified here are SOCKS proxies. Privoxy supports the SOCKS 4 and SOCKS 4A
+      protocols.
+
+      
+        7.5.1.
+        forward
+
+        
+          
+            Specifies:
+
+            
+              To which parent HTTP proxy specific requests should be
+              routed.
+            
+
+            Type of value:
+
+            
+              target_pattern http_parent[:port]
+
+              where target_pattern is a
+              URL pattern that
+              specifies to which requests (i.e. URLs) this forward rule shall
+              apply. Use / to denote "all URLs". http_parent[:port] is the DNS name or IP address of
+              the parent HTTP proxy through which the requests should be
+              forwarded, optionally followed by its listening port (default:
+              8000). Use a single dot (.) to denote
+              "no forwarding".
+            
+
+            Default value:
+
+            
+              Unset
+            
+
+            Effect if unset:
+
+            
+              Don't use parent HTTP proxies.
+            
+
+            Notes:
+
+            
+              If http_parent is
+              ".", then requests are not forwarded
+              to another HTTP proxy but are made directly to the web
+              servers.
+
+              http_parent can be a
+              numerical IPv6 address (if RFC 3493
+              is implemented). To prevent clashes with the port delimiter,
+              the whole IP address has to be put into brackets. On the other
+              hand a target_pattern
+              containing an IPv6 address has to be put into angle brackets
+              (normal brackets are reserved for regular expressions
+              already).
+
+              Multiple lines are OK, they are checked in sequence, and the
+              last match wins.
+            
+
+            Examples:
+
+            
+              Everything goes to an example parent proxy, except SSL on
+              port 443 (which it doesn't handle):
+
+              
+                
+                  
-                  
-                
+                       forward   /      parent-proxy.example.org:8080
   forward   :443   .
 
-                    
+                  
 
-                
-                  Everything goes to our example ISP's caching proxy, except
-                  for requests to that ISP's sites:
-                
-                
-                
-                
-                  
-                    
+                
+              
-+              Everything goes to our example ISP's caching proxy, except
+              for requests to that ISP's sites:
+
+              
+                
+                  
-                  
-                
+                       forward   /                  caching-proxy.isp.example.net:8000
   forward   .isp.example.net   .
 
-                    
+                  
 
-                
-                  Parent proxy specified by an IPv6 address:
-                
-                
-                
-                
-                  
-                    
+                
+              
-+              Parent proxy specified by an IPv6 address:
+
+              
+                
+                  
-                  
-                
+                       forward   /                   [2001:DB8::1]:8000
 
-                    
+                  
 
-                
-                  Suppose your parent proxy doesn't support IPv6:
-                
-                
-                
-                
-                  
-                    
+                
+              
-+              Suppose your parent proxy doesn't support IPv6:
+
+              
+                
+                  
-                  
-                
+                       forward  /                        parent-proxy.example.org:8000
   forward  ipv6-server.example.org  .
   forward  <[2-3][0-9a-f][0-9a-f][0-9a-f]:*>   .
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            7.5.2. forward-socks4, forward-socks4a and
-            forward-socks5
-          
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  Through which SOCKS proxy (and optionally to which parent
-                  HTTP proxy) specific requests should be routed.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  target_pattern socks_proxy[:port] http_parent[:port]
-                
-                
-                  where target_pattern is
-                  a URL pattern
-                  that specifies to which requests (i.e. URLs) this forward
-                  rule shall apply. Use / to denote
-                  "all URLs". http_parent and socks_proxy are IP addresses in
-                  dotted decimal notation or valid DNS names (http_parent may be "." to denote "no HTTP
-                  forwarding"), and the optional port parameters are TCP ports,
-                  i.e. integer values from 1 to 65535
-                
-              
-              
-                Default value:
-              
-              
-                
-                  Unset
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  Don't use SOCKS proxies.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Multiple lines are OK, they are checked in sequence, and
-                  the last match wins.
-                
-                
-                  The difference between forward-socks4 and forward-socks4a is that in the SOCKS 4A
-                  protocol, the DNS resolution of the target hostname happens
-                  on the SOCKS server, while in SOCKS 4 it happens locally.
-                
-                
-                  With forward-socks5 the DNS
-                  resolution will happen on the remote server as well.
-                
-                
-                  socks_proxy and http_parent can be a
-                  numerical IPv6 address (if RFC
-                  3493 is implemented). To prevent clashes with the port
-                  delimiter, the whole IP address has to be put into
-                  brackets. On the other hand a target_pattern containing an IPv6
-                  address has to be put into angle brackets (normal brackets
-                  are reserved for regular expressions already).
-                
-                
-                  If http_parent is ".", then requests are not forwarded
-                  to another HTTP proxy but are made (HTTP-wise) directly to
-                  the web servers, albeit through a SOCKS proxy.
-                
-              
-              
-                Examples:
-              
-              
-                
-                  From the company example.com, direct connections are made
-                  to all "internal" domains, but
-                  everything outbound goes through their ISP's proxy by way
-                  of example.com's corporate SOCKS 4A gateway to the
-                  Internet.
-                
-                
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        7.5.2. forward-socks4,
+        forward-socks4a and forward-socks5

+
+        
+          
+            Specifies:
+
+            
+              Through which SOCKS proxy (and optionally to which parent
+              HTTP proxy) specific requests should be routed.
+            
+
+            Type of value:
+
+            
+              target_pattern socks_proxy[:port] http_parent[:port]
+
+              where target_pattern is a
+              URL pattern that
+              specifies to which requests (i.e. URLs) this forward rule shall
+              apply. Use / to denote "all URLs". http_parent and socks_proxy are IP addresses in dotted
+              decimal notation or valid DNS names (http_parent may be "." to denote "no HTTP
+              forwarding"), and the optional port parameters are TCP ports, i.e.
+              integer values from 1 to 65535
+            
+
+            Default value:
+
+            
+              Unset
+            
+
+            Effect if unset:
+
+            
+              Don't use SOCKS proxies.
+            
+
+            Notes:
+
+            
+              Multiple lines are OK, they are checked in sequence, and the
+              last match wins.
+
+              The difference between forward-socks4 and forward-socks4a is that in the SOCKS 4A
+              protocol, the DNS resolution of the target hostname happens on
+              the SOCKS server, while in SOCKS 4 it happens locally.
+
+              With forward-socks5 the DNS
+              resolution will happen on the remote server as well.
+
+              socks_proxy and http_parent can be a numerical IPv6
+              address (if RFC 3493 is implemented). To prevent clashes
+              with the port delimiter, the whole IP address has to be put
+              into brackets. On the other hand a target_pattern containing an IPv6 address
+              has to be put into angle brackets (normal brackets are reserved
+              for regular expressions already).
+
+              If http_parent is
+              ".", then requests are not forwarded
+              to another HTTP proxy but are made (HTTP-wise) directly to the
+              web servers, albeit through a SOCKS proxy.
+            
+
+            Examples:
+
+            
+              From the company example.com, direct connections are made to
+              all "internal" domains, but
+              everything outbound goes through their ISP's proxy by way of
+              example.com's corporate SOCKS 4A gateway to the Internet.
+
+              
+                
+                  
-                  
-                
+                       forward-socks4a   /              socks-gw.example.com:1080  www-cache.isp.example.net:8080
   forward           .example.com   .
 
-                    
+                  
 
-                
-                  A rule that uses a SOCKS 4 gateway for all destinations but
-                  no HTTP parent looks like this:
-                
-                
-                
-                
-                  
-                    
+                
+              
-+              A rule that uses a SOCKS 4 gateway for all destinations but
+              no HTTP parent looks like this:
+
+              
+                
+                  
-                  
-                
+                       forward-socks4   /               socks-gw.example.com:1080  .
 
-                    
+                  
 
-                
-                  To chain Privoxy and Tor, both running on the same system,
-                  you would use something like:
-                
-                
-                
-                
-                  
-                    
+                
+              
-+              To chain Privoxy and Tor, both running on the same system,
+              you would use something like:
+
+              
+                
+                  
-                  
-                
+                       forward-socks5   /               127.0.0.1:9050 .
 
-                    
+                  
 
-                
-                  The public Tor network
-                  can't be used to reach your local network, if you need to
-                  access local servers you therefore might want to make some
-                  exceptions:
-                
-                
-                
-                
-                  
-                    
+                
+              
-+              The public Tor network
+              can't be used to reach your local network, if you need to
+              access local servers you therefore might want to make some
+              exceptions:
+
+              
+                
+                  
-                  
-                
+                       forward         192.168.*.*/     .
   forward            10.*.*.*/     .
   forward           127.*.*.*/     .
 
-                    
+                  
 
-                
-                  Unencrypted connections to systems in these address ranges
-                  will be as (un)secure as the local network is, but the
-                  alternative is that you can't reach the local network
-                  through Privoxy at all. Of
-                  course this may actually be desired and there is no reason
-                  to make these exceptions if you aren't sure you need them.
-                
-                
-                  If you also want to be able to reach servers in your local
-                  network by using their names, you will need additional
-                  exceptions that look like this:
-                
-                
-                
-                
-                  
-                    
+                
+              
-+              Unencrypted connections to systems in these address ranges
+              will be as (un)secure as the local network is, but the
+              alternative is that you can't reach the local network through
+              Privoxy at all. Of course this
+              may actually be desired and there is no reason to make these
+              exceptions if you aren't sure you need them.
+
+              If you also want to be able to reach servers in your local
+              network by using their names, you will need additional
+              exceptions that look like this:
+
+              
+                
+                  
-                  
-                
+                      forward           localhost/     .
 
-                    
-              
-            
-          
+                  
+            
+          
         
-        
-          
-            7.5.3. Advanced Forwarding
-            Examples
-          
-          
-            If you have links to multiple ISPs that provide various special
-            content only to their subscribers, you can configure multiple
-            Privoxies which have connections
-            to the respective ISPs to act as forwarders to each other, so
-            that your
-            users can see the internal content of all ISPs.
-          
-          
-            Assume that host-a has a PPP connection to isp-a.example.net. And
-            host-b has a PPP connection to isp-b.example.org. Both run Privoxy. Their forwarding
-            configuration can look like this:
-          
-          
-            host-a:
-          
-          
-          
-          
-            
-              
+          
+        
-+      
+
+      
+        7.5.3. Advanced Forwarding
+        Examples
+
+        If you have links to multiple ISPs that provide various special
+        content only to their subscribers, you can configure multiple
+        Privoxies which have connections to
+        the respective ISPs to act as forwarders to each other, so that
+        your users can see the
+        internal content of all ISPs.
+
+        Assume that host-a has a PPP connection to isp-a.example.net. And
+        host-b has a PPP connection to isp-b.example.org. Both run
+        Privoxy. Their forwarding
+        configuration can look like this:
+
+        host-a:
+
+        
+          
+            
-            
-          
+                 forward    /           .
   forward    .isp-b.example.net  host-b:8118
 
-              
-
-          
-            host-b:
-          
-          
-          
-          
-            
-              
+          
+        
-+            
+
+        host-b:
+
+        
+          
+            
-            
-          
+                 forward    /           .
   forward    .isp-a.example.org  host-a:8118
 
-              
-
-          
-            Now, your users can set their browser's proxy to use either
-            host-a or host-b and be able to browse the internal content of
-            both isp-a and isp-b.
-          
-          
-            If you intend to chain Privoxy
-            and squid locally, then chaining
-            as browser -> squid -> privoxy is
-            the recommended way.
-          
-          
-            Assuming that Privoxy and squid run on the same box, your squid configuration could then look
-            like this:
-          
-          
-          
-          
-            
-              
+          
+        
-+            
+
+        Now, your users can set their browser's proxy to use either host-a
+        or host-b and be able to browse the internal content of both isp-a
+        and isp-b.
+
+        If you intend to chain Privoxy
+        and squid locally, then chaining as
+        browser -> squid -> privoxy is the
+        recommended way.
+
+        Assuming that Privoxy and
+        squid run on the same box, your
+        squid configuration could then look
+        like this:
+
+        
+          
+            
-            
-          
+                 # Define Privoxy as parent proxy (without ICP)
   cache_peer 127.0.0.1 parent 8118 7 no-query
 
@@ -2517,995 +2095,811 @@ Transitional//EN""http://www.w3.org/TR/html4/loose.dtd">
   # Forward all the rest to Privoxy
   never_direct allow all
 
-              
-
-          
-            You would then need to change your browser's proxy settings to
-            squid's address and port. Squid
-            normally uses port 3128. If unsure consult http_port in squid.conf.
-          
-          
-            You could just as well decide to only forward requests you
-            suspect of leading to Windows executables through a
-            virus-scanning parent proxy, say, on antivir.example.com, port 8010:
-          
-          
-          
-          
-            
-              
+          
+        
-+            
+
+        You would then need to change your browser's proxy settings to
+        squid's address and port. Squid
+        normally uses port 3128. If unsure consult http_port in squid.conf.
+
+        You could just as well decide to only forward requests you suspect
+        of leading to Windows executables through a virus-scanning parent
+        proxy, say, on antivir.example.com, port
+        8010:
+
+        
+          
+            
-            
-          
+                 forward   /                          .
   forward   /.*\.(exe|com|dll|zip)$    antivir.example.com:8010
 
-              
-        
-        
-          
-            7.5.4.
-            forwarded-connect-retries
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  How often Privoxy retries if a forwarded connection request
-                  fails.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  Number of retries.
-                
-              
-              
-                Default value:
-              
-              
-                
-                  0
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  Connections forwarded through other proxies are treated
-                  like direct connections and no retry attempts are made.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  forwarded-connect-retries is
-                  mainly interesting for socks4a connections, where Privoxy can't detect why the
-                  connections failed. The connection might have failed
-                  because of a DNS timeout in which case a retry makes sense,
-                  but it might also have failed because the server doesn't
-                  exist or isn't reachable. In this case the retry will just
-                  delay the appearance of Privoxy's error message.
-                
-                
-                  Note that in the context of this option, "forwarded connections" includes all
-                  connections that Privoxy forwards through other proxies.
-                  This option is not limited to the HTTP CONNECT method.
-                
-                
-                  Only use this option, if you are getting lots of
-                  forwarding-related error messages that go away when you try
-                  again manually. Start with a small value and check
-                  Privoxy's logfile from time to time, to see how many
-                  retries are usually needed.
-                
-              
-              
-                Examples:
-              
-              
-                
-                  forwarded-connect-retries 1
-                
-              
-            
-          
+            
+      
+
+      
+        7.5.4. forwarded-connect-retries
+
+        
+          
+            Specifies:
+
+            
+              How often Privoxy retries if a forwarded connection request
+              fails.
+            
+
+            Type of value:
+
+            
+              Number of retries.
+            
+
+            Default value:
+
+            
+              0
+            
+
+            Effect if unset:
+
+            
+              Connections forwarded through other proxies are treated like
+              direct connections and no retry attempts are made.
+            
+
+            Notes:
+
+            
+              forwarded-connect-retries is
+              mainly interesting for socks4a connections, where Privoxy can't detect why the connections
+              failed. The connection might have failed because of a DNS
+              timeout in which case a retry makes sense, but it might also
+              have failed because the server doesn't exist or isn't
+              reachable. In this case the retry will just delay the
+              appearance of Privoxy's error message.
+
+              Note that in the context of this option, "forwarded connections" includes all connections
+              that Privoxy forwards through other proxies. This option is not
+              limited to the HTTP CONNECT method.
+
+              Only use this option, if you are getting lots of
+              forwarding-related error messages that go away when you try
+              again manually. Start with a small value and check Privoxy's
+              logfile from time to time, to see how many retries are usually
+              needed.
+            
+
+            Examples:
+
+            
+              forwarded-connect-retries 1
+            
+          
         
       
-      
-        
-          7.6. Miscellaneous
-        
-        
-          
-            7.6.1.
-            accept-intercepted-requests
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  Whether intercepted requests should be treated as valid.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  0 or 1
-                
-              
-              
-                Default value:
-              
-              
-                
-                  0
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  Only proxy requests are accepted, intercepted requests are
-                  treated as invalid.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  If you don't trust your clients and want to force them to
-                  use Privoxy, enable this
-                  option and configure your packet filter to redirect
-                  outgoing HTTP connections into Privoxy.
-                
-                
-                  Make sure that Privoxy's
-                  own requests aren't redirected as well. Additionally take
-                  care that Privoxy can't
-                  intentionally connect to itself, otherwise you could run
-                  into redirection loops if Privoxy's listening port is reachable
-                  by the outside or an attacker has access to the pages you
-                  visit.
-                
-              
-              
-                Examples:
-              
-              
-                
-                  accept-intercepted-requests 1
-                
-              
-            
-          
+    
+
+    
+      7.6. Miscellaneous
+
+      
+        7.6.1.
+        accept-intercepted-requests
+
+        
+          
+            Specifies:
+
+            
+              Whether intercepted requests should be treated as valid.
+            
+
+            Type of value:
+
+            
+              0 or 1
+            
+
+            Default value:
+
+            
+              0
+            
+
+            Effect if unset:
+
+            
+              Only proxy requests are accepted, intercepted requests are
+              treated as invalid.
+            
+
+            Notes:
+
+            
+              If you don't trust your clients and want to force them to
+              use Privoxy, enable this
+              option and configure your packet filter to redirect outgoing
+              HTTP connections into Privoxy.
+
+              Make sure that Privoxy's
+              own requests aren't redirected as well. Additionally take care
+              that Privoxy can't
+              intentionally connect to itself, otherwise you could run into
+              redirection loops if Privoxy's
+              listening port is reachable by the outside or an attacker has
+              access to the pages you visit.
+            
+
+            Examples:
+
+            
+              accept-intercepted-requests 1
+            
+          
         
-        
-          
-            7.6.2.
-            allow-cgi-request-crunching
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  Whether requests to Privoxy's CGI pages can be blocked or
-                  redirected.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  0 or 1
-                
-              
-              
-                Default value:
-              
-              
-                
-                  0
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  Privoxy ignores block and
-                  redirect actions for its CGI pages.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  By default Privoxy ignores
-                  block or redirect actions for its CGI pages. Intercepting
-                  these requests can be useful in multi-user setups to
-                  implement fine-grained access control, but it can also
-                  render the complete web interface useless and make
-                  debugging problems painful if done without care.
-                
-                
-                  Don't enable this option unless you're sure that you really
-                  need it.
-                
-              
-              
-                Examples:
-              
-              
-                
-                  allow-cgi-request-crunching 1
-                
-              
-            
-          
+      
+
+      
+        7.6.2.
+        allow-cgi-request-crunching
+
+        
+          
+            Specifies:
+
+            
+              Whether requests to Privoxy's CGI pages can be blocked or
+              redirected.
+            
+
+            Type of value:
+
+            
+              0 or 1
+            
+
+            Default value:
+
+            
+              0
+            
+
+            Effect if unset:
+
+            
+              Privoxy ignores block and
+              redirect actions for its CGI pages.
+            
+
+            Notes:
+
+            
+              By default Privoxy ignores
+              block or redirect actions for its CGI pages. Intercepting these
+              requests can be useful in multi-user setups to implement
+              fine-grained access control, but it can also render the
+              complete web interface useless and make debugging problems
+              painful if done without care.
+
+              Don't enable this option unless you're sure that you really
+              need it.
+            
+
+            Examples:
+
+            
+              allow-cgi-request-crunching 1
+            
+          
         
-        
-          
-            7.6.3. split-large-forms
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  Whether the CGI interface should stay compatible with
-                  broken HTTP clients.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  0 or 1
-                
-              
-              
-                Default value:
-              
-              
-                
-                  0
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  The CGI form generate long GET URLs.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Privoxy's CGI forms can
-                  lead to rather long URLs. This isn't a problem as far as
-                  the HTTP standard is concerned, but it can confuse clients
-                  with arbitrary URL length limitations.
-                
-                
-                  Enabling split-large-forms causes Privoxy to divide big forms into
-                  smaller ones to keep the URL length down. It makes editing
-                  a lot less convenient and you can no longer submit all
-                  changes at once, but at least it works around this browser
-                  bug.
-                
-                
-                  If you don't notice any editing problems, there is no
-                  reason to enable this option, but if one of the submit
-                  buttons appears to be broken, you should give it a try.
-                
-              
-              
-                Examples:
-              
-              
-                
-                  split-large-forms 1
-                
-              
-            
-          
+      
+
+      
+        7.6.3. split-large-forms
+
+        
+          
+            Specifies:
+
+            
+              Whether the CGI interface should stay compatible with broken
+              HTTP clients.
+            
+
+            Type of value:
+
+            
+              0 or 1
+            
+
+            Default value:
+
+            
+              0
+            
+
+            Effect if unset:
+
+            
+              The CGI form generate long GET URLs.
+            
+
+            Notes:
+
+            
+              Privoxy's CGI forms can
+              lead to rather long URLs. This isn't a problem as far as the
+              HTTP standard is concerned, but it can confuse clients with
+              arbitrary URL length limitations.
+
+              Enabling split-large-forms causes Privoxy to divide big forms into smaller
+              ones to keep the URL length down. It makes editing a lot less
+              convenient and you can no longer submit all changes at once,
+              but at least it works around this browser bug.
+
+              If you don't notice any editing problems, there is no reason
+              to enable this option, but if one of the submit buttons appears
+              to be broken, you should give it a try.
+            
+
+            Examples:
+
+            
+              split-large-forms 1
+            
+          
         
-        
-          
-            7.6.4. keep-alive-timeout
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  Number of seconds after which an open connection will no
-                  longer be reused.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  Time in seconds.
-                
-              
-              
-                Default value:
-              
-              
-                
-                  None
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  Connections are not kept alive.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  This option allows clients to keep the connection to Privoxy alive. If the server
-                  supports it, Privoxy will
-                  keep the connection to the server alive as well. Under
-                  certain circumstances this may result in speed-ups.
-                
-                
-                  By default, Privoxy will
-                  close the connection to the server if the client connection
-                  gets closed, or if the specified timeout has been reached
-                  without a new request coming in. This behaviour can be
-                  changed with the connection-sharing option.
-                
-                
-                  This option has no effect if Privoxy has been compiled without
-                  keep-alive support.
-                
-                
-                  Note that a timeout of five seconds as used in the default
-                  configuration file significantly decreases the number of
-                  connections that will be reused. The value is used because
-                  some browsers limit the number of connections they open to
-                  a single host and apply the same limit to proxies. This can
-                  result in a single website "grabbing" all the connections the browser
-                  allows, which means connections to other websites can't be
-                  opened until the connections currently in use time out.
-                
-                
-                  Several users have reported this as a Privoxy bug, so the
-                  default value has been reduced. Consider increasing it to
-                  300 seconds or even more if you think your browser can
-                  handle it. If your browser appears to be hanging it can't.
-                
-              
-              
-                Examples:
-              
-              
-                
-                  keep-alive-timeout 300
-                
-              
-            
-          
+      
+
+      
+        7.6.4. keep-alive-timeout
+
+        
+          
+            Specifies:
+
+            
+              Number of seconds after which an open connection will no
+              longer be reused.
+            
+
+            Type of value:
+
+            
+              Time in seconds.
+            
+
+            Default value:
+
+            
+              None
+            
+
+            Effect if unset:
+
+            
+              Connections are not kept alive.
+            
+
+            Notes:
+
+            
+              This option allows clients to keep the connection to
+              Privoxy alive. If the server
+              supports it, Privoxy will keep
+              the connection to the server alive as well. Under certain
+              circumstances this may result in speed-ups.
+
+              By default, Privoxy will
+              close the connection to the server if the client connection
+              gets closed, or if the specified timeout has been reached
+              without a new request coming in. This behaviour can be changed
+              with the connection-sharing option.
+
+              This option has no effect if Privoxy has been compiled without
+              keep-alive support.
+
+              Note that a timeout of five seconds as used in the default
+              configuration file significantly decreases the number of
+              connections that will be reused. The value is used because some
+              browsers limit the number of connections they open to a single
+              host and apply the same limit to proxies. This can result in a
+              single website "grabbing" all the
+              connections the browser allows, which means connections to
+              other websites can't be opened until the connections currently
+              in use time out.
+
+              Several users have reported this as a Privoxy bug, so the
+              default value has been reduced. Consider increasing it to 300
+              seconds or even more if you think your browser can handle it.
+              If your browser appears to be hanging it can't.
+            
+
+            Examples:
+
+            
+              keep-alive-timeout 300
+            
+          
         
-        
-          
-            7.6.5.
-            default-server-timeout
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  Assumed server-side keep-alive timeout if not specified by
-                  the server.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  Time in seconds.
-                
-              
-              
-                Default value:
-              
-              
-                
-                  None
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  Connections for which the server didn't specify the
-                  keep-alive timeout are not reused.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Enabling this option significantly increases the number of
-                  connections that are reused, provided the keep-alive-timeout
-                  option is also enabled.
-                
-                
-                  While it also increases the number of connections problems
-                  when Privoxy tries to
-                  reuse a connection that already has been closed on the
-                  server side, or is closed while Privoxy is trying to reuse it, this
-                  should only be a problem if it happens for the first
-                  request sent by the client. If it happens for requests on
-                  reused client connections, Privoxy will simply close the
-                  connection and the client is supposed to retry the request
-                  without bothering the user.
-                
-                
-                  Enabling this option is therefore only recommended if the
-                  connection-sharing option is disabled.
-                
-                
-                  It is an error to specify a value larger than the keep-alive-timeout
-                  value.
-                
-                
-                  This option has no effect if Privoxy has been compiled without
-                  keep-alive support.
-                
-              
-              
-                Examples:
-              
-              
-                
-                  default-server-timeout 60
-                
-              
-            
-          
+      
+
+      
+        7.6.5. default-server-timeout
+
+        
+          
+            Specifies:
+
+            
+              Assumed server-side keep-alive timeout if not specified by
+              the server.
+            
+
+            Type of value:
+
+            
+              Time in seconds.
+            
+
+            Default value:
+
+            
+              None
+            
+
+            Effect if unset:
+
+            
+              Connections for which the server didn't specify the
+              keep-alive timeout are not reused.
+            
+
+            Notes:
+
+            
+              Enabling this option significantly increases the number of
+              connections that are reused, provided the keep-alive-timeout
+              option is also enabled.
+
+              While it also increases the number of connections problems
+              when Privoxy tries to reuse a
+              connection that already has been closed on the server side, or
+              is closed while Privoxy is
+              trying to reuse it, this should only be a problem if it happens
+              for the first request sent by the client. If it happens for
+              requests on reused client connections, Privoxy will simply close the connection
+              and the client is supposed to retry the request without
+              bothering the user.
+
+              Enabling this option is therefore only recommended if the
+              connection-sharing option is disabled.
+
+              It is an error to specify a value larger than the keep-alive-timeout
+              value.
+
+              This option has no effect if Privoxy has been compiled without
+              keep-alive support.
+            
+
+            Examples:
+
+            
+              default-server-timeout 60
+            
+          
         
-        
-          
-            7.6.6. connection-sharing
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  Whether or not outgoing connections that have been kept
-                  alive should be shared between different incoming
-                  connections.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  0 or 1
-                
-              
-              
-                Default value:
-              
-              
-                
-                  None
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  Connections are not shared.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  This option has no effect if Privoxy has been compiled without
-                  keep-alive support, or if it's disabled.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Note that reusing connections doesn't necessary cause
-                  speedups. There are also a few privacy implications you
-                  should be aware of.
-                
-                
-                  If this option is effective, outgoing connections are
-                  shared between clients (if there are more than one) and
-                  closing the browser that initiated the outgoing connection
-                  does no longer affect the connection between Privoxy and the server unless the
-                  client's request hasn't been completed yet.
-                
-                
-                  If the outgoing connection is idle, it will not be closed
-                  until either Privoxy's or
-                  the server's timeout is reached. While it's open, the
-                  server knows that the system running Privoxy is still there.
-                
-                
-                  If there are more than one client (maybe even belonging to
-                  multiple users), they will be able to reuse each others
-                  connections. This is potentially dangerous in case of
-                  authentication schemes like NTLM where only the connection
-                  is authenticated, instead of requiring authentication for
-                  each request.
-                
-                
-                  If there is only a single client, and if said client can
-                  keep connections alive on its own, enabling this option has
-                  next to no effect. If the client doesn't support connection
-                  keep-alive, enabling this option may make sense as it
-                  allows Privoxy to keep
-                  outgoing connections alive even if the client itself
-                  doesn't support it.
-                
-                
-                  You should also be aware that enabling this option
-                  increases the likelihood of getting the "No server or
-                  forwarder data" error message, especially if you are using
-                  a slow connection to the Internet.
-                
-                
-                  This option should only be used by experienced users who
-                  understand the risks and can weight them against the
-                  benefits.
-                
-              
-              
-                Examples:
-              
-              
-                
-                  connection-sharing 1
-                
-              
-            
-          
+      
+
+      
+        7.6.6. connection-sharing
+
+        
+          
+            Specifies:
+
+            
+              Whether or not outgoing connections that have been kept
+              alive should be shared between different incoming
+              connections.
+            
+
+            Type of value:
+
+            
+              0 or 1
+            
+
+            Default value:
+
+            
+              None
+            
+
+            Effect if unset:
+
+            
+              Connections are not shared.
+            
+
+            Notes:
+
+            
+              This option has no effect if Privoxy has been compiled without
+              keep-alive support, or if it's disabled.
+            
+
+            Notes:
+
+            
+              Note that reusing connections doesn't necessary cause
+              speedups. There are also a few privacy implications you should
+              be aware of.
+
+              If this option is effective, outgoing connections are shared
+              between clients (if there are more than one) and closing the
+              browser that initiated the outgoing connection does no longer
+              affect the connection between Privoxy and the server unless the client's
+              request hasn't been completed yet.
+
+              If the outgoing connection is idle, it will not be closed
+              until either Privoxy's or the
+              server's timeout is reached. While it's open, the server knows
+              that the system running Privoxy is still there.
+
+              If there are more than one client (maybe even belonging to
+              multiple users), they will be able to reuse each others
+              connections. This is potentially dangerous in case of
+              authentication schemes like NTLM where only the connection is
+              authenticated, instead of requiring authentication for each
+              request.
+
+              If there is only a single client, and if said client can
+              keep connections alive on its own, enabling this option has
+              next to no effect. If the client doesn't support connection
+              keep-alive, enabling this option may make sense as it allows
+              Privoxy to keep outgoing
+              connections alive even if the client itself doesn't support
+              it.
+
+              You should also be aware that enabling this option increases
+              the likelihood of getting the "No server or forwarder data"
+              error message, especially if you are using a slow connection to
+              the Internet.
+
+              This option should only be used by experienced users who
+              understand the risks and can weight them against the
+              benefits.
+            
+
+            Examples:
+
+            
+              connection-sharing 1
+            
+          
         
-        
-          
-            7.6.7. socket-timeout
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  Number of seconds after which a socket times out if no data
-                  is received.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  Time in seconds.
-                
-              
-              
-                Default value:
-              
-              
-                
-                  None
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  A default value of 300 seconds is used.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  The default is quite high and you probably want to reduce
-                  it. If you aren't using an occasionally slow proxy like
-                  Tor, reducing it to a few seconds should be fine.
-                
-              
-              
-                Examples:
-              
-              
-                
-                  socket-timeout 300
-                
-              
-            
-          
+      
+
+      
+        7.6.7.
+        socket-timeout
+
+        
+          
+            Specifies:
+
+            
+              Number of seconds after which a socket times out if no data
+              is received.
+            
+
+            Type of value:
+
+            
+              Time in seconds.
+            
+
+            Default value:
+
+            
+              None
+            
+
+            Effect if unset:
+
+            
+              A default value of 300 seconds is used.
+            
+
+            Notes:
+
+            
+              The default is quite high and you probably want to reduce
+              it. If you aren't using an occasionally slow proxy like Tor,
+              reducing it to a few seconds should be fine.
+            
+
+            Examples:
+
+            
+              socket-timeout 300
+            
+          
         
-        
-          
-            7.6.8.
-            max-client-connections
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  Maximum number of client connections that will be served.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  Positive number.
-                
-              
-              
-                Default value:
-              
-              
-                
-                  None
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  Connections are served until a resource limit is reached.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Privoxy creates one thread
-                  (or process) for every incoming client connection that
-                  isn't rejected based on the access control settings.
-                
-                
-                  If the system is powerful enough, Privoxy can theoretically deal with
-                  several hundred (or thousand) connections at the same time,
-                  but some operating systems enforce resource limits by
-                  shutting down offending processes and their default limits
-                  may be below the ones Privoxy would require under heavy
-                  load.
-                
-                
-                  Configuring Privoxy to
-                  enforce a connection limit below the thread or process
-                  limit used by the operating system makes sure this doesn't
-                  happen. Simply increasing the operating system's limit
-                  would work too, but if Privoxy isn't the only application
-                  running on the system, you may actually want to limit the
-                  resources used by Privoxy.
-                
-                
-                  If Privoxy is only used by
-                  a single trusted user, limiting the number of client
-                  connections is probably unnecessary. If there are multiple
-                  possibly untrusted users you probably still want to
-                  additionally use a packet filter to limit the maximal
-                  number of incoming connections per client. Otherwise a
-                  malicious user could intentionally create a high number of
-                  connections to prevent other users from using Privoxy.
-                
-                
-                  Obviously using this option only makes sense if you choose
-                  a limit below the one enforced by the operating system.
-                
-              
-              
-                Examples:
-              
-              
-                
-                  max-client-connections 256
-                
-              
-            
-          
+      
+
+      
+        7.6.8. max-client-connections
+
+        
+          
+            Specifies:
+
+            
+              Maximum number of client connections that will be
+              served.
+            
+
+            Type of value:
+
+            
+              Positive number.
+            
+
+            Default value:
+
+            
+              None
+            
+
+            Effect if unset:
+
+            
+              Connections are served until a resource limit is
+              reached.
+            
+
+            Notes:
+
+            
+              Privoxy creates one thread
+              (or process) for every incoming client connection that isn't
+              rejected based on the access control settings.
+
+              If the system is powerful enough, Privoxy can theoretically deal with
+              several hundred (or thousand) connections at the same time, but
+              some operating systems enforce resource limits by shutting down
+              offending processes and their default limits may be below the
+              ones Privoxy would require
+              under heavy load.
+
+              Configuring Privoxy to
+              enforce a connection limit below the thread or process limit
+              used by the operating system makes sure this doesn't happen.
+              Simply increasing the operating system's limit would work too,
+              but if Privoxy isn't the only
+              application running on the system, you may actually want to
+              limit the resources used by Privoxy.
+
+              If Privoxy is only used by
+              a single trusted user, limiting the number of client
+              connections is probably unnecessary. If there are multiple
+              possibly untrusted users you probably still want to
+              additionally use a packet filter to limit the maximal number of
+              incoming connections per client. Otherwise a malicious user
+              could intentionally create a high number of connections to
+              prevent other users from using Privoxy.
+
+              Obviously using this option only makes sense if you choose a
+              limit below the one enforced by the operating system.
+            
+
+            Examples:
+
+            
+              max-client-connections 256
+            
+          
         
-        
-          
-            7.6.9.
-            handle-as-empty-doc-returns-ok
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  The status code Privoxy returns for pages blocked with +handle-as-empty-document.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  0 or 1
-                
-              
-              
-                Default value:
-              
-              
-                
-                  0
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  Privoxy returns a status 403(forbidden) for all blocked
-                  pages.
-                
-              
-              
-                Effect if set:
-              
-              
-                
-                  Privoxy returns a status 200(OK) for pages blocked with
-                  +handle-as-empty-document and a status 403(Forbidden) for
-                  all other blocked pages.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  This is a work-around for Firefox bug 492459: " Websites are no longer rendered if SSL requests
-                  for JavaScripts are blocked by a proxy. " (https://bugzilla.mozilla.org/show_bug.cgi?id=492459)
-                  As the bug has been fixed for quite some time this option
-                  should no longer be needed and will be removed in a future
-                  release. Please speak up if you have a reason why the
-                  option should be kept around.
-                
-              
-            
-          
+      
+
+      
+        7.6.9.
+        handle-as-empty-doc-returns-ok
+
+        
+          
+            Specifies:
+
+            
+              The status code Privoxy returns for pages blocked with
+              +handle-as-empty-document.
+            
+
+            Type of value:
+
+            
+              0 or 1
+            
+
+            Default value:
+
+            
+              0
+            
+
+            Effect if unset:
+
+            
+              Privoxy returns a status 403(forbidden) for all blocked
+              pages.
+            
+
+            Effect if set:
+
+            
+              Privoxy returns a status 200(OK) for pages blocked with
+              +handle-as-empty-document and a status 403(Forbidden) for all
+              other blocked pages.
+            
+
+            Notes:
+
+            
+              This is a work-around for Firefox bug 492459: " Websites are no longer rendered if SSL requests for
+              JavaScripts are blocked by a proxy. " (https://bugzilla.mozilla.org/show_bug.cgi?id=492459)
+              As the bug has been fixed for quite some time this option
+              should no longer be needed and will be removed in a future
+              release. Please speak up if you have a reason why the option
+              should be kept around.
+            
+          
         
-        
-          
-            7.6.10. enable-compression
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  Whether or not buffered content is compressed before
-                  delivery.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  0 or 1
-                
-              
-              
-                Default value:
-              
-              
-                
-                  0
-                
-              
-              
-                Effect if unset:
-              
-              
-                
-                  Privoxy does not compress buffered content.
-                
-              
-              
-                Effect if set:
-              
-              
-                
-                  Privoxy compresses buffered content before delivering it to
-                  the client, provided the client supports it.
-                
-              
-              
-                Notes:
-              
-              
-                
-                  This directive is only supported if Privoxy has been
-                  compiled with FEATURE_COMPRESSION, which should not to be
-                  confused with FEATURE_ZLIB.
-                
-                
-                  Compressing buffered content is mainly useful if Privoxy
-                  and the client are running on different systems. If they
-                  are running on the same system, enabling compression is
-                  likely to slow things down. If you didn't measure
-                  otherwise, you should assume that it does and keep this
-                  option disabled.
-                
-                
-                  Privoxy will not compress buffered content below a certain
-                  length.
-                
-              
-            
-          
+      
+
+      
+        7.6.10. enable-compression
+
+        
+          
+            Specifies:
+
+            
+              Whether or not buffered content is compressed before
+              delivery.
+            
+
+            Type of value:
+
+            
+              0 or 1
+            
+
+            Default value:
+
+            
+              0
+            
+
+            Effect if unset:
+
+            
+              Privoxy does not compress buffered content.
+            
+
+            Effect if set:
+
+            
+              Privoxy compresses buffered content before delivering it to
+              the client, provided the client supports it.
+            
+
+            Notes:
+
+            
+              This directive is only supported if Privoxy has been
+              compiled with FEATURE_COMPRESSION, which should not to be
+              confused with FEATURE_ZLIB.
+
+              Compressing buffered content is mainly useful if Privoxy and
+              the client are running on different systems. If they are
+              running on the same system, enabling compression is likely to
+              slow things down. If you didn't measure otherwise, you should
+              assume that it does and keep this option disabled.
+
+              Privoxy will not compress buffered content below a certain
+              length.
+            
+          
         
-        
-          
-            7.6.11. compression-level
-          
-          
-            
-              
-                Specifies:
-              
-              
-                
-                  The compression level that is passed to the zlib library
-                  when compressing buffered content.
-                
-              
-              
-                Type of value:
-              
-              
-                
-                  Positive number ranging from 0
-                  to 9.
-                
-              
-              
-                Default value:
-              
-              
-                
-                  1
-                
-              
-              
-                Notes:
-              
-              
-                
-                  Compressing the data more takes usually longer than
-                  compressing it less or not compressing it at all. Which
-                  level is best depends on the connection between Privoxy and
-                  the client. If you can't be bothered to benchmark it for
-                  yourself, you should stick with the default and keep
-                  compression disabled.
-                
-                
-                  If compression is disabled, the compression level is
-                  irrelevant.
-                
-              
-              
-                Examples:
-              
-              
-                
-                
-                
-                  
-                    
+                
+              
-+      
+
+      
+        7.6.11. compression-level
+
+        
+          
+            Specifies:
+
+            
+              The compression level that is passed to the zlib library
+              when compressing buffered content.
+            
+
+            Type of value:
+
+            
+              Positive number ranging from 0 to
+              9.
+            
+
+            Default value:
+
+            
+              1
+            
+
+            Notes:
+
+            
+              Compressing the data more takes usually longer than
+              compressing it less or not compressing it at all. Which level
+              is best depends on the connection between Privoxy and the
+              client. If you can't be bothered to benchmark it for yourself,
+              you should stick with the default and keep compression
+              disabled.
+
+              If compression is disabled, the compression level is
+              irrelevant.
+            
+
+            Examples:
+
+            
+              
+                
+                  
-                  
-                
+                         # Best speed (compared to the other levels)
     compression-level 1
     # Best compression
@@ -3518,186 +2912,140 @@ Transitional//EN""http://www.w3.org/TR/html4/loose.dtd">
     compression-level 0
 
 
-                    
-              
-            
-          
+                  
+            
+          
         
       
-      
-        
-          7.7. Windows GUI Options
-        
-        
-          Privoxy has a number of options
-          specific to the Windows GUI interface:
-        
-        
-        
-          If "activity-animation" is set to 1, the
-          Privoxy icon will animate when
-          "Privoxy" is active. To turn off, set to
-          0.
-        
-        
-        
-        
-            activity-animation 1

-              
-        
-         
-        
-          If "log-messages" is set to 1, Privoxy will log messages to the console
-          window:
-        
-        
-        
-        
-            log-messages 1

-              
-        
-         
-        
-          If "log-buffer-size" is set to 1, the
-          size of the log buffer, i.e. the amount of memory used for the log
-          messages displayed in the console window, will be limited to "log-max-lines" (see below).
-        
-        
-          Warning: Setting this to 0 will result in the buffer to grow
-          infinitely and eat up all your memory!
-        
-        
-        
-        
-            log-buffer-size 1

-              
-        
-         
-        
-          log-max-lines is the maximum
-          number of lines held in the log buffer. See above.
-        
-        
-        
-        
-            log-max-lines 200

-              
-        
-         
-        
-          If "log-highlight-messages" is set to 1,
-          Privoxy will highlight portions of
-          the log messages with a bold-faced font:
-        
-        
-        
-        
-            log-highlight-messages 1

-              
-        
-         
-        
-          The font used in the console window:
-        
-        
-        
-        
-            log-font-name Comic Sans MS

-              
-        
-         
-        
-          Font size used in the console window:
-        
-        
-        
-        
-            log-font-size 8

-              
-        
-         
-        
-          "show-on-task-bar" controls whether or
-          not Privoxy will appear as a
-          button on the Task bar when minimized:
-        
-        
-        
-        
-            show-on-task-bar 0

-              
-        
-         
-        
-          If "close-button-minimizes" is set to 1,
-          the Windows close button will minimize Privoxy instead of closing the program (close
-          with the exit option on the File menu).
-        
-        
-        
-        
-            close-button-minimizes 1

-              
-        
-         
-        
-          The "hide-console" option is specific to
-          the MS-Win console version of Privoxy. If this option is used, Privoxy will disconnect from and hide the
-          command console.
-        
-        
-        
-        
-            #hide-console

-              
-        
-      
     
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-            Prev
-          
-            Home
-          
-            Next
-          

-            Privoxy Configuration
-          
-             
-          
-            Actions Files
-          
+
+    
+      7.7. Windows
+      GUI Options
+
+      Privoxy has a number of options
+      specific to the Windows GUI interface:

+
+      If "activity-animation" is set to 1, the
+      Privoxy icon will animate when
+      "Privoxy" is active. To turn off, set to
+      0.
+
+        activity-animation 1

+         

+
+      If "log-messages" is set to 1,
+      Privoxy will log messages to the
+      console window:
+
+        log-messages 1

+         

+
+      If "log-buffer-size" is set to 1, the
+      size of the log buffer, i.e. the amount of memory used for the log
+      messages displayed in the console window, will be limited to
+      "log-max-lines" (see below).
+
+      Warning: Setting this to 0 will result in the buffer to grow
+      infinitely and eat up all your memory!
+
+        log-buffer-size 1

+         

+
+      log-max-lines is the maximum number
+      of lines held in the log buffer. See above.
+
+        log-max-lines 200

+         

+
+      If "log-highlight-messages" is set to 1,
+      Privoxy will highlight portions of the
+      log messages with a bold-faced font:
+
+        log-highlight-messages 1

+         

+
+      The font used in the console window:
+
+        log-font-name Comic Sans MS

+         

+
+      Font size used in the console window:
+
+        log-font-size 8

+         

+
+      "show-on-task-bar" controls whether or
+      not Privoxy will appear as a button on
+      the Task bar when minimized:
+
+        show-on-task-bar 0

+         

+
+      If "close-button-minimizes" is set to 1,
+      the Windows close button will minimize Privoxy instead of closing the program (close with
+      the exit option on the File menu).
+
+        close-button-minimizes 1

+         

+
+      The "hide-console" option is specific to
+      the MS-Win console version of Privoxy.
+      If this option is used, Privoxy will
+      disconnect from and hide the command console.
+
+        #hide-console

+         
     
-  
-
+  
+
+  
+    
+
+    
+      
+        
+
+        
 
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Privoxy Configuration   Actions Files
+  
+
+
diff --git a/doc/webserver/user-manual/configuration.html b/doc/webserver/user-manual/configuration.html
index 1885bdae..a03e6f83 100644
--- a/doc/webserver/user-manual/configuration.html
+++ b/doc/webserver/user-manual/configuration.html
@@ -1,320 +1,282 @@
-
+
+
 
-  
-    
-    
-      Privoxy Configuration
-    
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  span.c3 {font-style: italic}
+  table.c2 {background-color: #E0E0E0}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    

-            Privoxy 3.0.18 User Manual
-          
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy 3.0.18 User Manual
Prev Next
+    
+  
+
+  
+    6. Privoxy
+    Configuration
+
+    All Privoxy configuration is stored
+    in text files. These files can be edited with a text editor. Many
+    important aspects of Privoxy can also be
+    controlled easily with a web browser.
+
+    
+      6.1. Controlling
+      Privoxy with Your Web Browser
+
+      Privoxy's user interface can be
+      reached through the special URL http://config.privoxy.org/ (shortcut: http://p.p/), which is a built-in page
+      and works without Internet access. You will see the following
+      section:
+
+      
-          
-          
-          
-        
-      
         
-            Prev
-          
-          
-            Next
-          
-      
-    
-    
-      
-        6. Privoxy Configuration
-      
-      
-        All Privoxy configuration is stored
-        in text files. These files can be edited with a text editor. Many
-        important aspects of Privoxy can
-        also be controlled easily with a web browser.
-      
-      
-        
-          6.1. Controlling Privoxy with Your Web Browser
-        
-        
-          Privoxy's user interface can be
-          reached through the special URL http://config.privoxy.org/ (shortcut: http://p.p/), which is a built-in
-          page and works without Internet access. You will see the following
-          section:
-        
-        
-          
-            
-          
-        
-+          
+             
 
-              
-                    Privoxy Menu
-              
--
-              
-                
-                  
-                    
-                  
-                  
-                    
-                  
-                  
-                    
-                  
-                  
-                    
-                  
-                  
-                    
-                  
-                  
-                    
-                  
-                
-              
-                              ▪  View & change the current configuration
-                    

-                              ▪  View the source code version numbers
-                    

-                              ▪  View the request headers.
-                    

-                              ▪  Look up which actions apply to a URL and why
-
-                    

-                              ▪  Toggle Privoxy on or off
-                    

-                              ▪  Documentation
-                    
-+
+                Privoxy Menu
+             
-            
-        
-          This should be self-explanatory. Note the first item leads to an
-          editor for the actions files, which
-          is where the ad, banner, cookie, and URL blocking magic is
-          configured as well as other advanced features of Privoxy. This is an easy way to adjust various
-          aspects of Privoxy configuration.
-          The actions file, and other configuration files, are explained in
-          detail below.
-        
-        
-          "Toggle Privoxy On or Off" is handy for
-          sites that might have problems with your current actions and
-          filters. You can in fact use it as a test to see whether it is
-          Privoxy causing the problem or
-          not. Privoxy continues to run as a
-          proxy in this case, but all manipulation is disabled, i.e. Privoxy acts like a normal forwarding
-          proxy. There is even a toggle Bookmarklet offered, so that you
-          can toggle Privoxy with one click
-          from your browser.
-        
-        
-          Note that several of the features described above are disabled by
-          default in Privoxy 3.0.7 beta and
-          later. Check the configuration
-          file to learn why and in which cases it's safe to enable them
-          again.
-        
-      
-      
-        
-          6.2. Configuration Files Overview
-        
-        
-          For Unix, *BSD and Linux, all configuration files are located in
-          /etc/privoxy/ by default. For MS Windows,
-          OS/2, and AmigaOS these are all in the same directory as the Privoxy executable. The name and number
-          of configuration files has changed from previous versions, and is
-          subject to change as development progresses.
-        
-        
-          The installed defaults provide a reasonable starting point, though
-          some settings may be aggressive by some standards. For the time
-          being, the principle configuration files are:
-        
-        
-        
-        
-          
-            
-              The main configuration file is named
-              config on Linux, Unix, BSD, OS/2, and
-              AmigaOS and config.txt on Windows.
-              This is a required file.
-            
-          
-          
-            
-              match-all.action is used to define
-              which "actions" relating to
-              banner-blocking, images, pop-ups, content modification, cookie
-              handling etc should be applied by default. It should be the
-              first actions file loaded.
-            
-            
-              default.action defines many
-              exceptions (both positive and negative) from the default set of
-              actions that's configured in match-all.action. It should be the second
-              actions file loaded and shouldn't be edited by the user.
-            
-            
-              Multiple actions files may be defined in config. These are processed in the order they
-              are defined. Local customizations and locally preferred
-              exceptions to the default policies as defined in match-all.action (which you will most probably
-              want to define sooner or later) are best applied in user.action, where you can preserve them across
-              upgrades. The file isn't installed by all installers, but you
-              can easily create it yourself with a text editor.
-            
-            
-              There is also a web based editor that can be accessed from http://config.privoxy.org/show-status (Shortcut: http://p.p/show-status) for the various actions
-              files.
-            
-          
-          
-            
-              "Filter files" (the filter file) can be used to re-write the
-              raw page content, including viewable text as well as embedded
-              HTML and JavaScript, and whatever else lurks on any given web
-              page. The filtering jobs are only pre-defined here; whether to
-              apply them or not is up to the actions files. default.filter includes various filters made
-              available for use by the developers. Some are much more
-              intrusive than others, and all should be used with caution. You
-              may define additional filter files in config as you can with actions files. We
-              suggest user.filter for any locally
-              defined filters or customizations.
-            
-          
-        
-
-        
-          The syntax of the configuration and filter files may change between
-          different Privoxy versions, unfortunately some enhancements cost
-          backwards compatibility.
-        
-        
-          All files use the "#" character to denote a comment (the rest of
-          the line will be ignored) and understand line continuation through
-          placing a backslash ("\") as the very last
-          character in a line. If the # is preceded
-          by a backslash, it looses its special function. Placing a # in front of an otherwise valid configuration
-          line to prevent it from being interpreted is called "commenting
-          out" that line. Blank lines are ignored.
-        
-        
-          The actions files and filter files can use Perl style regular expressions for maximum
-          flexibility.
-        
-        
-          After making any changes, there is no need to restart Privoxy in order for the changes to take
-          effect. Privoxy detects such
-          changes automatically. Note, however, that it may take one or two
-          additional requests for the change to take effect. When changing
-          the listening address of Privoxy,
-          these "wake up" requests must obviously
-          be sent to the old listening address.
-        
-        
-          While under development, the configuration content is subject to
-          change. The below documentation may not be accurate by the time you
-          read this. Also, what constitutes a "default" setting, may change, so please check all
-          your configuration files on important issues.
-        
-      
-    
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-            Prev
-          
-            Home
-          
-            Next
-          

-            Starting Privoxy
-          
-             
-          
-            The Main Configuration File
+
+            
+              
+                
+                  
+                
+
+                
+                  
+                
+
+                
+                  
+                
+
+                
+                  
+                
+
+                
+                  
+                
+
+                
+                  
+                
+              
+            
+                          ▪  View & change the current
+                  configuration

+                          ▪  View the source code version numbers

+                          ▪  View the request headers.

+                          ▪  Look up which actions apply to a URL and
+                  why

+                          ▪  Toggle Privoxy on or off

+                          ▪  Documentation
           
         
       
+
+      This should be self-explanatory. Note the first item leads to an
+      editor for the actions files, which is
+      where the ad, banner, cookie, and URL blocking magic is configured as
+      well as other advanced features of Privoxy. This is an easy way to adjust various
+      aspects of Privoxy configuration. The
+      actions file, and other configuration files, are explained in detail
+      below.
+
+      "Toggle Privoxy On or Off" is handy for
+      sites that might have problems with your current actions and filters.
+      You can in fact use it as a test to see whether it is Privoxy causing the problem or not. Privoxy continues to run as a proxy in this case,
+      but all manipulation is disabled, i.e. Privoxy acts like a normal forwarding proxy. There
+      is even a toggle Bookmarklet
+      offered, so that you can toggle Privoxy with one click from your browser.
+
+      Note that several of the features described above are disabled by
+      default in Privoxy 3.0.7 beta and
+      later. Check the configuration
+      file to learn why and in which cases it's safe to enable them
+      again.
     
-  
-
 
+    
+      6.2.
+      Configuration Files Overview
+
+      For Unix, *BSD and Linux, all configuration files are located in
+      /etc/privoxy/ by default. For MS Windows,
+      OS/2, and AmigaOS these are all in the same directory as the
+      Privoxy executable.
+
+      The installed defaults provide a reasonable starting point, though
+      some settings may be aggressive by some standards. For the time being,
+      the principle configuration files are:
+
+      
+        
+          The main configuration file is named
+          config on Linux, Unix, BSD, OS/2, and
+          AmigaOS and config.txt on Windows. This
+          is a required file.
+        
+
+        
+          match-all.action is used to define
+          which "actions" relating to
+          banner-blocking, images, pop-ups, content modification, cookie
+          handling etc should be applied by default. It should be the first
+          actions file loaded.
+
+          default.action defines many exceptions
+          (both positive and negative) from the default set of actions that's
+          configured in match-all.action. It should
+          be the second actions file loaded and shouldn't be edited by the
+          user.
+
+          Multiple actions files may be defined in config. These are processed in the order they are
+          defined. Local customizations and locally preferred exceptions to
+          the default policies as defined in match-all.action (which you will most probably want
+          to define sooner or later) are best applied in user.action, where you can preserve them across
+          upgrades. The file isn't installed by all installers, but you can
+          easily create it yourself with a text editor.
+
+          There is also a web based editor that can be accessed from
+          http://config.privoxy.org/show-status (Shortcut:
+          http://p.p/show-status) for the various actions
+          files.
+        
+
+        
+          "Filter files" (the filter file) can be used to re-write the raw
+          page content, including viewable text as well as embedded HTML and
+          JavaScript, and whatever else lurks on any given web page. The
+          filtering jobs are only pre-defined here; whether to apply them or
+          not is up to the actions files. default.filter includes various filters made
+          available for use by the developers. Some are much more intrusive
+          than others, and all should be used with caution. You may define
+          additional filter files in config as you
+          can with actions files. We suggest user.filter for any locally defined filters or
+          customizations.
+        
+      
+
+      The syntax of the configuration and filter files may change between
+      different Privoxy versions, unfortunately some enhancements cost
+      backwards compatibility.
+
+      All files use the "#" character to denote a comment (the rest of the
+      line will be ignored) and understand line continuation through placing
+      a backslash ("\") as the very last character
+      in a line. If the # is preceded by a
+      backslash, it looses its special function. Placing a # in front of an otherwise valid configuration line to
+      prevent it from being interpreted is called "commenting out" that line.
+      Blank lines are ignored.
+
+      The actions files and filter files can use Perl style regular expressions for maximum
+      flexibility.
+
+      After making any changes, there is no need to restart Privoxy in order for the changes to take effect.
+      Privoxy detects such changes
+      automatically. Note, however, that it may take one or two additional
+      requests for the change to take effect. When changing the listening
+      address of Privoxy, these "wake up" requests must obviously be sent to the
+      old listening address.
+    
+  
+
+  
+    
+
+    
+      
+        
+
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Starting Privoxy   The Main Configuration
+        File
+  
+
+
diff --git a/doc/webserver/user-manual/contact.html b/doc/webserver/user-manual/contact.html
index 189114c3..cce50c59 100644
--- a/doc/webserver/user-manual/contact.html
+++ b/doc/webserver/user-manual/contact.html
@@ -1,407 +1,368 @@
-
+
+
 
-  
-    
-    
-      Contacting the Developers, Bug Reporting and Feature Requests
-    
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
-        
-          
-          
-          
-        
-      
-            Privoxy 3.0.18 User Manual
-          

-            Prev
-          
-          
-            Next
-          
-      
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  span.c2 {font-style: italic}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy 3.0.18 User Manual
Prev Next
+    
+  
+
+  
+    11. Contacting the
+    Developers, Bug Reporting and Feature Requests
+
+    We value your feedback. In fact, we rely on it to improve Privoxy and its configuration. However, please note
+    the following hints, so we can provide you with the best support:
+
+    
+      11.1.
+      Get Support
+
+      For casual users, our support forum at SourceForge is probably best suited:
+      http://sourceforge.net/tracker/?group_id=11118&atid=211118
+
+      All users are of course welcome to discuss their issues on the
+      users mailing list, where the developers also hang
+      around.
+
+      Please don't sent private support requests to individual Privoxy
+      developers, either use the mailing lists or the support trackers.
+
+      If you have to contact a Privoxy developer directly for other
+      reasons, please send a real mail and do not bother with SourceForge's
+      messaging system. Answers to SourceForge messages are usually bounced
+      by SourceForge's mail server in which case the developer wasted time
+      writing a response you don't get. From your point of view it will look
+      like your message has been completely ignored, so this is frustrating
+      for all parties involved.
+
+      Note that the Privoxy mailing lists are moderated. Posts from
+      unsubscribed addresses have to be accepted manually by a moderator.
+      This may cause a delay of several days and if you use a subject that
+      doesn't clearly mention Privoxy or one of its features, your message
+      may be accidentally discarded as spam.
+
+      If you aren't subscribed, you should therefore spend a few seconds
+      to come up with a proper subject. Additionally you should make it clear
+      that you want to get CC'd. Otherwise some responses will be directed to
+      the mailing list only, and you won't see them.
     
-    
-      
-        11. Contacting the Developers, Bug Reporting and
-        Feature Requests
-      
-      
-        We value your feedback. In fact, we rely on it to improve Privoxy and its configuration. However,
-        please note the following hints, so we can provide you with the best
-        support:
-      
-      
-        
-          11.1. Get Support
-        
-        
-          For casual users, our support forum at SourceForge is probably best
-          suited: http://sourceforge.net/tracker/?group_id=11118&atid=211118
-        
-        
-          All users are of course welcome to discuss their issues on the users mailing list, where the developers also
-          hang around.
-        
-        
-          Please don't sent private support requests to individual Privoxy
-          developers, either use the mailing lists or the support trackers.
-        
-        
-          If you have to contact a Privoxy developer directly for other
-          reasons, please send a real mail and do not bother with
-          SourceForge's messaging system. Answers to SourceForge messages are
-          usually bounced by SourceForge's mail server in which case the
-          developer wasted time writing a response you don't get. From your
-          point of view it will look like your message has been completely
-          ignored, so this is frustrating for all parties involved.
-        
-        
-          Note that the Privoxy mailing lists are moderated. Posts from
-          unsubscribed addresses have to be accepted manually by a moderator.
-          This may cause a delay of several days and if you use a subject
-          that doesn't clearly mention Privoxy or one of its features, your
-          message may be accidentally discarded as spam.
-        
-        
-          If you aren't subscribed, you should therefore spend a few seconds
-          to come up with a proper subject. Additionally you should make it
-          clear that you want to get CC'd. Otherwise some responses will be
-          directed to the mailing list only, and you won't see them.
-        
+
+    
+      11.2. Reporting
+      Problems
+
+      "Problems" for our purposes, come in two
+      forms:
+
+      
+        
+          Configuration issues, such as ads that slip through, or sites
+          that don't function properly due to one Privoxy "action" or
+          another being turned "on".
+        
+
+        
+          "Bugs" in the programming code that
+          makes up Privoxy, such as that
+          might cause a crash.
+        
+      
+
+      
+        11.2.1.
+        Reporting Ads or Other Configuration Problems
+
+        Please send feedback on ads that slipped through, innocent images
+        that were blocked, sites that don't work properly, and other
+        configuration related problem of default.action file, to http://sourceforge.net/tracker/?group_id=11118&atid=460288,
+        the Actions File Tracker.
+
+        New, improved default.action files may
+        occasionally be made available based on your feedback. These will be
+        announced on the ijbswa-announce list and available from our the files section of our project page.
       
-      
-        
-          11.2. Reporting Problems
-        
-        
-          "Problems" for our purposes, come in two
-          forms:
-        
+
+      
+        11.2.2.
+        Reporting Bugs
+
+        Please report all bugs through our bug tracker: http://sourceforge.net/tracker/?group_id=11118&atid=111118.
+
+        Before doing so, please make sure that the bug has not already been submitted and observe
+        the additional hints at the top of the submit form. If already submitted, please feel free
+        to add any info to the original report that might help to solve the
+        issue.
+
+        Please try to verify that it is a Privoxy bug, and not a browser or site bug or
+        documented behaviour that just happens to be different than what you
+        expected. If unsure, try toggling
+        off Privoxy, and see if the
+        problem persists.
+
+        If you are using your own custom configuration, please try the
+        stock configs to see if the problem is configuration related. If
+        you're having problems with a feature that is disabled by default,
+        please ask around on the mailing list if others can reproduce the
+        problem.
+
+        If you aren't using the latest Privoxy version, the bug may have
+        been found and fixed in the meantime. We would appreciate if you
+        could take the time to upgrade to the latest version (or even the latest CVS
+        snapshot) and verify that your bug still exists.
+
+        Please be sure to provide the following information:
+
         
           
-            
-              Configuration issues, such as ads that slip through, or sites
-              that don't function properly due to one Privoxy "action" or another being turned "on".
-            
+            The exact Privoxy version you
+            are using (if you got the source from CVS, please also provide
+            the source code revisions as shown in http://config.privoxy.org/show-version).
+          
+
+          
+            The operating system and versions you run Privoxy on, (e.g. Windows XP SP2), if you are using a Unix
+            flavor, sending the output of "uname
+            -a" should do, in case of GNU/Linux, please also name the
+            distribution.
+          
+
+          
+            The name, platform, and version of the browser you were using (e.g. Internet Explorer v5.5 for Mac).
+          
+
+          
+            The URL where the problem occurred, or some way for us to
+            duplicate the problem (e.g. http://somesite.example.com/?somethingelse=123).
+          
+
+          
+            Whether your version of Privoxy is one supplied by the Privoxy developers via SourceForge, or if
+            you got your copy somewhere else.
+          
+
+          
+            Whether you are using Privoxy
+            in tandem with another proxy such as Tor. If so, please temporary disable the
+            other proxy to see if the symptoms change.
           
+
           
-            
-              "Bugs" in the programming code that
-              makes up Privoxy, such as that
-              might cause a crash.
-            
+            Whether you are using a personal firewall product. If so, does
+            Privoxy work without it?
+          
+
+          
+            Any other pertinent information to help identify the problem
+            such as config or log file excerpts (yes, you should have log
+            file entries for each action taken). To get a meaningful logfile,
+            please make sure that the logfile
+            directive is being used and the following debug
+            options are enabled:
+
+            
+            debug     1 # Log the destination for each request Privoxy let through. See also debug 1024.

+
+            debug     2 # show each connection status

+
+            debug     4 # show I/O status

+
+            debug     8 # show header parsing

+
+            debug   128 # debug redirects

+            debug   256 # debug GIF de-animation

+
+            debug   512 # Common Log Format

+
+            debug  1024 # Log the destination for requests Privoxy didn't let through, and the reason why.

+
+            debug  4096 # Startup banner and warnings.

+
+            debug  8192 # Non-fatal errorsIf you
+            are having trouble with a filter, please additionally enable
+
+            
+            debug    64 # debug regular expression filtersIf
+            you are using Privoxy 3.0.17 or later and suspect that it
+            interprets the request or the response incorrectly, please enable
+
+            
+            debug 32768 # log all data read from the networkNote
+            that Privoxy log files may contain sensitive information so
+            please don't submit any logfiles you didn't read first. You can
+            mask sensitive information as long as it's clear that you removed
+            something.
           
         
-        
-          
-            11.2.1. Reporting Ads or Other
-            Configuration Problems
-          
-          
-            Please send feedback on ads that slipped through, innocent images
-            that were blocked, sites that don't work properly, and other
-            configuration related problem of default.action file, to http://sourceforge.net/tracker/?group_id=11118&atid=460288,
-            the Actions File Tracker.
-          
-          
-            New, improved default.action files may
-            occasionally be made available based on your feedback. These will
-            be announced on the ijbswa-announce list and available from our the
-            files section of our project page.
-          
-        
-        
-          
-            11.2.2. Reporting Bugs
-          
-          
-            Please report all bugs through our bug tracker: http://sourceforge.net/tracker/?group_id=11118&atid=111118.
-          
-          
-            Before doing so, please make sure that the bug has not already been
-            submitted and observe the additional hints at the top
-            of the submit form. If already submitted, please feel
-            free to add any info to the original report that might help to
-            solve the issue.
-          
-          
-            Please try to verify that it is a Privoxy bug, and not a browser or site bug
-            or documented behaviour that just happens to be different than
-            what you expected. If unsure, try toggling off Privoxy,
-            and see if the problem persists.
-          
-          
-            If you are using your own custom configuration, please try the
-            stock configs to see if the problem is configuration related. If
-            you're having problems with a feature that is disabled by
-            default, please ask around on the mailing list if others can
-            reproduce the problem.
-          
-          
-            If you aren't using the latest Privoxy version, the bug may have
-            been found and fixed in the meantime. We would appreciate if you
-            could take the time to upgrade to the latest version (or even the latest CVS
-            snapshot) and verify that your bug still exists.
-          
-          
-            Please be sure to provide the following information:
-          
-          
-          
-          
-            
-              
-                The exact Privoxy version
-                you are using (if you got the source from CVS, please also
-                provide the source code revisions as shown in http://config.privoxy.org/show-version).
-              
-            
-            
-              
-                The operating system and versions you run Privoxy on, (e.g. Windows XP SP2), if you are using a Unix
-                flavor, sending the output of "uname
-                -a" should do, in case of GNU/Linux, please also name
-                the distribution.
-              
-            
-            
-              
-                The name, platform, and version of the browser you were using (e.g. Internet Explorer v5.5 for Mac).
-              
-            
-            
-              
-                The URL where the problem occurred, or some way for us to
-                duplicate the problem (e.g. http://somesite.example.com/?somethingelse=123).
-              
-            
-            
-              
-                Whether your version of Privoxy is one supplied by the Privoxy developers via
-                SourceForge, or if you got your copy somewhere else.
-              
-            
-            
-              
-                Whether you are using Privoxy in tandem with another proxy
-                such as Tor. If so, please
-                temporary disable the other proxy to see if the symptoms
-                change.
-              
-            
-            
-              
-                Whether you are using a personal firewall product. If so,
-                does Privoxy work without
-                it?
-              
-            
-            
-              
-                Any other pertinent information to help identify the problem
-                such as config or log file excerpts (yes, you should have log
-                file entries for each action taken). To get a meaningful
-                logfile, please make sure that the logfile
-                directive is being used and the following debug
-                options are enabled:
-              
-              
-                debug     1 # Log the destination for each request Privoxy let through. See also debug 1024.

-
-                 debug     2 # show each connection status

-
-                 debug     4 # show I/O status

-
-                 debug     8 # show header parsing

-
-                 debug   128 # debug redirects

-
-                 debug   256 # debug GIF de-animation

-
-                 debug   512 # Common Log Format

-
-                 debug  1024 # Log the destination for requests Privoxy didn't let through, and the reason why.

-
-                 debug  4096 # Startup banner and warnings.

-
-                 debug  8192 # Non-fatal errors
-              
-              If you are having trouble with a filter, please additionally
-              enable
-              
-                debug    64 # debug regular expression filters
-              
-              If you are using Privoxy 3.0.17 or later and suspect that it
-              interprets the request or the response incorrectly, please
-              enable
-              
-                debug 32768 # log all data read from the network
-              
-              Note that Privoxy log files may contain sensitive information
-              so please don't submit any logfiles you didn't read first. You
-              can mask sensitive information as long as it's clear that you
-              removed something.

-            
-          
-
-          
-            You don't have to tell us your actual name when filing a problem
-            report, but if you don't, please use a nickname so we can
-            differentiate between your messages and the ones entered by other
-            "anonymous" users that may respond to your request if they have
-            the same problem or already found a solution. Note that due to
-            spam the trackers may not always allow to post without being
-            logged into SourceForge. If that's the case, you are still free
-            to create a login that isn't directly linked to your name,
-            though.
-          
-          
-            Please also check the status of your request a few days after
-            submitting it, as we may request additional information. If you
-            use a SF id, you should automatically get a mail when someone
-            responds to your request. Please don't bother to add an email
-            address when using the tracker. If you prefer to communicate
-            through email, just use one of the mailing lists directly.
-          
-          
-            The appendix of the Privoxy User Manual also has
-            helpful information on understanding actions, and action
-            debugging.
-          
-        
-      
-      
-        
-          11.3. Request New Features
-        
-        
-          You are welcome to submit ideas on new features or other proposals
-          for improvement through our feature request tracker at http://sourceforge.net/tracker/?atid=361118&group_id=11118.
-        
-      
-      
-        
-          11.4. Mailing Lists
-        
-        
-          If you prefer to communicate through email, instead of using a web
-          interface, feel free to use one of the mailing lists. To discuss
-          issues that haven't been completely diagnosed yet, please use the
-          Privoxy users list. Technically interested users and people who
-          wish to contribute to the project are always welcome on the
-          developers list. You can find an overview of all Privoxy-related mailing lists, including list
-          archives, at: http://sourceforge.net/mail/?group_id=11118.
-        
+
+        You don't have to tell us your actual name when filing a problem
+        report, but if you don't, please use a nickname so we can
+        differentiate between your messages and the ones entered by other
+        "anonymous" users that may respond to your request if they have the
+        same problem or already found a solution. Note that due to spam the
+        trackers may not always allow to post without being logged into
+        SourceForge. If that's the case, you are still free to create a login
+        that isn't directly linked to your name, though.
+
+        Please also check the status of your request a few days after
+        submitting it, as we may request additional information. If you use a
+        SF id, you should automatically get a mail when someone responds to
+        your request. Please don't bother to add an email address when using
+        the tracker. If you prefer to communicate through email, just use one
+        of the mailing lists directly.
+
+        If you are new to reporting problems, you might be interested in
+        How to Report Bugs Effectively.
+
+        If you are new to reporting problems, you might be interested in
+        How to Report Bugs Effectively.
+
+        The appendix of the Privoxy User Manual also has
+        helpful information on understanding actions, and action
+        debugging.
       
     
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-            Prev
-          
-            Home
-          
-            Next
-          

-            Privoxy's Template Files
-          
-             
-          
-            Privoxy Copyright, License and History
-          
+
+    
+      11.3.
+      Request New Features
+
+      You are welcome to submit ideas on new features or other proposals
+      for improvement through our feature request tracker at http://sourceforge.net/tracker/?atid=361118&group_id=11118.
     
-  
-
 
+    
+      11.4.
+      Mailing Lists
+
+      If you prefer to communicate through email, instead of using a web
+      interface, feel free to use one of the mailing lists. To discuss issues
+      that haven't been completely diagnosed yet, please use the Privoxy
+      users list. Technically interested users and people who wish to
+      contribute to the project are always welcome on the developers list.
+      You can find an overview of all Privoxy-related mailing lists, including list
+      archives, at: http://sourceforge.net/mail/?group_id=11118.
+    
+  
+
+  
+    
+
+    
+      
+        
+
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Privoxy's Template
+        Files   Privoxy Copyright, License
+        and History
+  
+
+
diff --git a/doc/webserver/user-manual/copyright.html b/doc/webserver/user-manual/copyright.html
index 217336e8..4d0ed29a 100644
--- a/doc/webserver/user-manual/copyright.html
+++ b/doc/webserver/user-manual/copyright.html
@@ -1,306 +1,281 @@
-
+
+
 
-  
-    
-    
-      Privoxy Copyright, License and History
-    
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
-        
-          
-          
-          
-        
-      
-            Privoxy 3.0.18 User Manual
-          

-            Prev
-          
-          
-            Next
-          
-      
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  a.c2 {font-style: italic}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy 3.0.18 User Manual
Prev Next
+    
+  
+
+  
+    12. Privoxy
+    Copyright, License and History
+
+    Copyright © 2001-2011 by Privoxy Developers <ijbswa-developers@lists.sourceforge.net>
+
+    Some source code is based on code Copyright © 1997 by Anonymous
+    Coders and Junkbusters, Inc. and licensed under the GNU General Public License.
+
+    
+      12.1. License
+
+      Privoxy is free software; you can
+      redistribute it and/or modify it under the terms of the GNU General Public License, version 2, as published by
+      the Free Software Foundation.
+
+      This program is distributed in the hope that it will be useful, but
+      WITHOUT ANY WARRANTY; without even the implied warranty of
+      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for details.
+
+      You should have received a copy of the GNU
+      GPL along with this program; if not, write to the
+
+       Free Software

+       Foundation, Inc. 51 Franklin
+      Street, Fifth Floor

+       Boston, MA 02110-1301

+       USA 
     
-    
-      
-        12. Privoxy Copyright, License and History
-      
-      
-        Copyright © 2001-2011 by Privoxy Developers <ijbswa-developers@lists.sourceforge.net>
-      
-      
-        Some source code is based on code Copyright © 1997 by Anonymous
-        Coders and Junkbusters, Inc. and licensed under the GNU General Public License.
-      
-      
-        
-          12.1. License
-        
-        
-          Privoxy is free software; you can
-          redistribute it and/or modify it under the terms of the GNU General Public License, version 2, as published
-          by the Free Software Foundation.
-        
-        
-          This program is distributed in the hope that it will be useful, but
-          WITHOUT ANY WARRANTY; without even the implied warranty of
-          MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
-          License for details.
-        
-        
-          You should have received a copy of the GNU
-          GPL along with this program; if not, write to the
-        
-        
-           Free Software

-            Foundation, Inc. 51 Franklin
-          Street, Fifth Floor

-            Boston, MA 02110-1301

-            USA 
-        
-      
-      
-        
-          12.2. History
-        
-        
-          A long time ago, there was the Internet Junkbuster, by Anonymous Coders
-          and Junkbusters
-          Corporation. This saved many users a lot of pain in the early
-          days of web advertising and user tracking.
-        
-        
-          But the web, its protocols and standards, and with it, the
-          techniques for forcing ads on users, give up autonomy over their
-          browsing, and for tracking them, keeps evolving. Unfortunately, the
-          Internet Junkbuster did not.
-          Version 2.0.2, published in 1998, was (and is) the last official release available from Junkbusters
-          Corporation. Fortunately, it had been released under the GNU GPL, which allowed further development by others.
-        
-        
-          So Stefan Waldherr started maintaining an improved version of the
-          software, to which eventually a number of people contributed
-          patches. It could already replace banners with a transparent image,
-          and had a first version of pop-up killing, but it was still very
-          closely based on the original, with all its limitations, such as
-          the lack of HTTP/1.1 support, flexible per-site configuration, or
-          content modification. The last release from this effort was version
-          2.0.2-10, published in 2000.
-        
-        
-          Then, some developers picked up the thread, and started turning the
-          software inside out, upside down, and then reassembled it, adding
-          many new features along the way.
-        
-        
-          The result of this is Privoxy,
-          whose first stable version, 3.0, was released August, 2002.
-        
-      
-      
-        
-          12.3. Authors
-        
-        
-          Current Privoxy Team:
-        
-        
-           Fabian Keil, lead developer

-            David Schmidt, developer

-            Hal Burgiss

-            Mark Miller

-            Gerry Murphy

-            Lee Rian

-            Roland Rosenfeld
-        
-        
-          Former Privoxy Team Members:
-        
-        
-           Johny Agotnes

-            Rodrigo Barbosa

-            Moritz Barsnick

-            Ian Cummings

-            Brian Dessent

-            Jon Foster

-            Karsten Hopp

-            Alexander Lazic

-            Daniel Leite

-            Gábor Lipták

-            Adam Lock

-            Guy Laroche

-            Justin McMurtry

-            Andreas Oesterhelt

-            Haroon Rafique

-            Georg Sauthoff

-            Thomas Steudten

-            Jörg Strohmayer

-            Rodney Stromlund

-            Sviatoslav Sviridov

-            Sarantis Paskalis

-            Stefan Waldherr
-        
-        
-          Thanks to the many people who have tested Privoxy, reported bugs,
-          provided patches, made suggestions or contributed in some way.
-          These include (in alphabetical order):
-        
-        
-           Ken Arromdee

-            Devin Bayer

-            Havard Berland

-            Gergely Bor

-            Francois Botha

-            Reiner Buehl

-            Andrew J. Caines

-            Clifford Caoile

-            Wan-Teh Chang

-            Frédéric Crozat

-            Michael T. Davis

-            Mattes Dolak

-            Matthias Drochner

-            Peter E.

-            Florian Effenberger

-            Markus Elfring

-            Dean Gaudet

-            Stephen Gildea

-            Daniel Griscom

-            Felix Gröbert

-            Jeff H.

-            Aaron Hamid

-            Darel Henman

-            Magnus Holmgren

-            Eric M. Hopper

-            Ralf Horstmann

-            Stefan Huehner

-            Peter Hyman

-            Derek Jennings

-            Petr Kadlec

-            David Laight

-            Bert van Leeuwen

-            Don Libes

-            Paul Lieverse

-            Toby Lyward

-            Wil Mahan

-            Jindrich Makovicka

-            Francois Marier

-            David Mediavilla

-            Raphael Moll

-            Amuro Namie

-            Adam Piggott

-            Petr Písar

-            Dan Price

-            Roberto Ragusa

-            Félix Rauch

-            Maynard Riley

-            Chung-chieh Shan

-            Spinor S.

-            Bart Schelstraete

-            Oliver Stoeneberg

-            Peter Thoenen

-            Martin Thomas

-            Bobby G. Vinyard

-            Jochen Voss

-            Glenn Washburn

-            Song Weijia

-            Jörg Weinmann

-            Darren Wiebe

-            Anduin Withers

-            Oliver Yeoh

-            Jamie Zawinski
-        
-        
-          Privoxy is based in part on code originally developed by
-          Junkbusters Corp. and Anonymous Coders.
-        
-        
-          Privoxy heavily relies on Philip Hazel's PCRE.
-        
-        
-          The code to filter compressed content makes use of zlib which is
-          written by Jean-loup Gailly and Mark Adler.
-        
-        
-          On systems that lack snprintf(), Privoxy is using a version written
-          by Mark Martinec. On systems that lack strptime(), Privoxy is using
-          the one from the GNU C Library written by Ulrich Drepper.
-        
-      
+
+    
+      12.2. History
+
+      A long time ago, there was the Internet Junkbuster, by Anonymous Coders and
+      Junkbusters
+      Corporation. This saved many users a lot of pain in the early days
+      of web advertising and user tracking.
+
+      But the web, its protocols and standards, and with it, the
+      techniques for forcing ads on users, give up autonomy over their
+      browsing, and for tracking them, keeps evolving. Unfortunately, the
+      Internet Junkbuster did not. Version
+      2.0.2, published in 1998, was (and is) the last official release available from Junkbusters Corporation. Fortunately, it had been
+      released under the GNU GPL, which allowed further development by others.
+
+      So Stefan Waldherr started maintaining an improved version of the
+      software, to which eventually a number of people contributed patches.
+      It could already replace banners with a transparent image, and had a
+      first version of pop-up killing, but it was still very closely based on
+      the original, with all its limitations, such as the lack of HTTP/1.1
+      support, flexible per-site configuration, or content modification. The
+      last release from this effort was version 2.0.2-10, published in
+      2000.
+
+      Then, some developers picked up the thread, and started turning the
+      software inside out, upside down, and then reassembled it, adding many
+      new features along the way.
+
+      The result of this is Privoxy,
+      whose first stable version, 3.0, was released August, 2002.
     
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-            Prev
-          
-            Home
-          
-            Next
-          

-            Contacting the Developers, Bug Reporting and Feature Requests
-          
-             
-          
-            See Also
-          
+
+    
+      12.3. Authors
+
+      Current Privoxy Team:
+
+      
+       Fabian Keil, lead developer

+       David Schmidt, developer

+       Hal Burgiss

+       Mark Miller

+       Gerry Murphy

+       Lee Rian

+       Roland Rosenfeld
+
+      Former Privoxy Team Members:
+
+       Johny Agotnes

+       Rodrigo Barbosa

+       Moritz Barsnick

+       Ian Cummings

+       Brian Dessent

+       Jon Foster

+       Karsten Hopp

+       Alexander Lazic

+       Daniel Leite

+       Gábor Lipták

+       Adam Lock

+       Guy Laroche

+       Justin McMurtry

+       Andreas Oesterhelt

+       Haroon Rafique

+       Georg Sauthoff

+       Thomas Steudten

+       Jörg Strohmayer

+       Rodney Stromlund

+       Sviatoslav Sviridov

+       Sarantis Paskalis

+       Stefan Waldherr
+
+      Thanks to the many people who have tested Privoxy, reported bugs,
+      provided patches, made suggestions or contributed in some way. These
+      include (in alphabetical order):
+
+       Ken Arromdee

+       Devin Bayer

+       Havard Berland

+       Gergely Bor

+       Francois Botha

+       Reiner Buehl

+       Andrew J. Caines

+       Clifford Caoile

+       Wan-Teh Chang

+       Frédéric Crozat

+       Michael T. Davis

+       Mattes Dolak

+       Matthias Drochner

+       Peter E.

+       Florian Effenberger

+       Markus Elfring

+       Dean Gaudet

+       Stephen Gildea

+       Daniel Griscom

+       Felix Gröbert

+       Jeff H.

+       Aaron Hamid

+       Darel Henman

+       Magnus Holmgren

+       Eric M. Hopper

+       Ralf Horstmann

+       Stefan Huehner

+       Peter Hyman

+       Derek Jennings

+       Petr Kadlec

+       David Laight

+       Bert van Leeuwen

+       Don Libes

+       Paul Lieverse

+       Toby Lyward

+       Wil Mahan

+       Jindrich Makovicka

+       Francois Marier

+       David Mediavilla

+       Raphael Moll

+       Amuro Namie

+       Adam Piggott

+       Petr Písar

+       Dan Price

+       Roberto Ragusa

+       Félix Rauch

+       Maynard Riley

+       Chung-chieh Shan

+       Spinor S.

+       Bart Schelstraete

+       Oliver Stoeneberg

+       Peter Thoenen

+       Martin Thomas

+       Bobby G. Vinyard

+       Jochen Voss

+       Glenn Washburn

+       Song Weijia

+       Jörg Weinmann

+       Darren Wiebe

+       Anduin Withers

+       Oliver Yeoh

+       Jamie Zawinski
+
+      Privoxy is based in part on code originally developed by Junkbusters
+      Corp. and Anonymous Coders.
+
+      Privoxy heavily relies on Philip Hazel's PCRE.
+
+      The code to filter compressed content makes use of zlib which is
+      written by Jean-loup Gailly and Mark Adler.
+
+      On systems that lack snprintf(), Privoxy is using a version written
+      by Mark Martinec. On systems that lack strptime(), Privoxy is using the
+      one from the GNU C Library written by Ulrich Drepper.
     
-  
-
+  
+
+  
+    
+
+    
+      
+        
+
+        
 
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Contacting the Developers,
+        Bug Reporting and Feature Requests   See Also
+  
+
+
diff --git a/doc/webserver/user-manual/filter-file.html b/doc/webserver/user-manual/filter-file.html
index d48f67e7..c7383a81 100644
--- a/doc/webserver/user-manual/filter-file.html
+++ b/doc/webserver/user-manual/filter-file.html
@@ -1,459 +1,406 @@
-
+
+
 
-  
-    
-    
-      Filter Files
-    
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  table.c4 {background-color: #E0E0E0}
+  tt.c3 {font-style: italic}
+  span.c2 {font-style: italic}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    

-            Privoxy 3.0.18 User Manual
-          
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy 3.0.18 User Manual
Prev Next
+    
+  
+
+  
+    9. Filter
+    Files
+
+    On-the-fly text substitutions need to be defined in a "filter file". Once defined, they can then be invoked as
+    an "action".
+
+    Privoxy supports three different
+    filter actions: filter to rewrite the content that is
+    send to the client, client-header-filter to
+    rewrite headers that are send by the client, and server-header-filter to
+    rewrite headers that are send by the server.
+
+    Privoxy also supports two tagger
+    actions: client-header-tagger
+    and server-header-tagger.
+    Taggers and filters use the same syntax in the filter files, the
+    difference is that taggers don't modify the text they are filtering, but
+    use a rewritten version of the filtered text as tag. The tags can then be
+    used to change the applying actions through sections with tag-patterns.
+
+    Multiple filter files can be defined through the filterfile config
+    directive. The filters as supplied by the developers are located in
+    default.filter. It is recommended that any
+    locally defined or modified filters go in a separately defined file such
+    as user.filter.
+
+    Common tasks for content filters are to eliminate common annoyances in
+    HTML and JavaScript, such as pop-up windows, exit consoles, crippled
+    windows without navigation tools, the infamous <BLINK> tag etc, to
+    suppress images with certain width and height attributes (standard banner
+    sizes or web-bugs), or just to have fun.
+
+    Enabled content filters are applied to any content whose "Content Type" header is recognised as a sign of
+    text-based content, with the exception of text/plain. Use the force-text-mode action to also
+    filter other content.
+
+    Substitutions are made at the source level, so if you want to
+    "roll your own" filters, you should first be
+    familiar with HTML syntax, and, of course, regular expressions.
+
+    Just like the actions files, the
+    filter file is organized in sections, which are called filters here. Each filter consists of a
+    heading line, that starts with one of the keywords FILTER:,
+    CLIENT-HEADER-FILTER: or SERVER-HEADER-FILTER: followed by the filter's
+    name, and a short (one line)
+    description of what it does.
+    Below that line come the jobs,
+    i.e. lines that define the actual text substitutions. By convention, the
+    name of a filter should describe what the filter eliminates. The comment is used in the
+    web-based user
+    interface.
+
+    Once a filter called name has been
+    defined in the filter file, it can be invoked by using an action of the
+    form +filter{name} in any actions file.
+
+    Filter definitions start with a header line that contains the filter
+    type, the filter name and the filter description. A content filter header
+    line for a filter called "foo" could look like
+    this:
+
+    
+      
+        
+      
+    
+          +FILTER: foo Replace all "foo" with "bar"
+
+        
+
+    Below that line, and up to the next header line, come the jobs that
+    define what text replacements the filter executes. They are specified in
+    a syntax that imitates Perl's s/// operator. If you are
+    familiar with Perl, you will find this to be quite intuitive, and may
+    want to look at the PCRS documentation for the subtle differences to Perl
+    behaviour. Most notably, the non-standard option letter U is supported, which turns the default to ungreedy
+    matching.
+
+    If you are new to "Regular Expressions", you might
+    want to take a look at the Appendix on
+    regular expressions, and see the Perl manual for
+    the
+    s/// operator's syntax and Perl-style regular
+    expressions in general. The below examples might also help to get you
+    started.
+
+    
+      9.1. Filter File
+      Tutorial
+
+      Now, let's complete our "foo" content
+      filter. We have already defined the heading, but the jobs are still
+      missing. Since all it does is to replace "foo" with "bar", there is
+      only one (trivial) job needed:
+
+      
-          
-          
-          
         
-            Prev
-          
-          
-            Next
+          
+            +s/foo/bar/
+
           
         
       
-      
-    
-    
-      
-        9. Filter Files
-      
-      
-        On-the-fly text substitutions need to be defined in a "filter file". Once defined, they can then be invoked
-        as an "action".
-      
-      
-        Privoxy supports three different
-        filter actions: filter to rewrite the content
-        that is send to the client, client-header-filter
-        to rewrite headers that are send by the client, and server-header-filter
-        to rewrite headers that are send by the server.
-      
-      
-        Privoxy also supports two tagger
-        actions: client-header-tagger
-        and server-header-tagger.
-        Taggers and filters use the same syntax in the filter files, the
-        difference is that taggers don't modify the text they are filtering,
-        but use a rewritten version of the filtered text as tag. The tags can
-        then be used to change the applying actions through sections with tag-patterns.
-      
-      
-        Multiple filter files can be defined through the filterfile config
-        directive. The filters as supplied by the developers are located in
-        default.filter. It is recommended that any
-        locally defined or modified filters go in a separately defined file
-        such as user.filter.
-      
-      
-        Common tasks for content filters are to eliminate common annoyances
-        in HTML and JavaScript, such as pop-up windows, exit consoles,
-        crippled windows without navigation tools, the infamous <BLINK>
-        tag etc, to suppress images with certain width and height attributes
-        (standard banner sizes or web-bugs), or just to have fun.
-      
-      
-        Enabled content filters are applied to any content whose "Content Type" header is recognised as a sign of
-        text-based content, with the exception of text/plain. Use the force-text-mode action to
-        also filter other content.
-      
-      
-        Substitutions are made at the source level, so if you want to "roll your own" filters, you should first be
-        familiar with HTML syntax, and, of course, regular expressions.
-      
-      
-        Just like the actions files, the
-        filter file is organized in sections, which are called filters here. Each filter
-        consists of a heading line, that starts with one of the keywords FILTER:, CLIENT-HEADER-FILTER: or SERVER-HEADER-FILTER: followed by the filter's name, and a short
-        (one line) description of what it does. Below that line
-        come the jobs,
-        i.e. lines that define the actual text substitutions. By convention,
-        the name of a filter should describe what the filter eliminates. The comment is
-        used in the web-based user interface.
-      
-      
-        Once a filter called name has
-        been defined in the filter file, it can be invoked by using an action
-        of the form +filter{name} in any actions file.
-      
-      
-        Filter definitions start with a header line that contains the filter
-        type, the filter name and the filter description. A content filter
-        header line for a filter called "foo"
-        could look like this:
-      
-      
-      
-      
+
+      But wait! Didn't the comment say that all occurrences of "foo" should be replaced? Our current job will only take
+      care of the first "foo" on each page. For
+      global substitution, we'll need to add the g
+      option:
+
+      

         
           
--FILTER: foo Replace all "foo" with "bar"
+            +s/foo/bar/g
 
           
         
       
 
-      
-        Below that line, and up to the next header line, come the jobs that
-        define what text replacements the filter executes. They are specified
-        in a syntax that imitates Perl's s/// operator. If you are
-        familiar with Perl, you will find this to be quite intuitive, and may
-        want to look at the PCRS documentation for the subtle differences to
-        Perl behaviour. Most notably, the non-standard option letter U is supported, which turns the default to
-        ungreedy matching.
-      
-      
-        If you are new to "Regular Expressions", you
-        might want to take a look at the Appendix on regular expressions, and see
-        the Perl
-        manual for the s/// operator's syntax and Perl-style
-        regular expressions in general. The below examples might also
-        help to get you started.
-      
-      
-        
-          9.1. Filter File Tutorial
-        
-        
-          Now, let's complete our "foo" content
-          filter. We have already defined the heading, but the jobs are still
-          missing. Since all it does is to replace "foo" with "bar", there
-          is only one (trivial) job needed:
-        
-        
-        
-        
-          
-            
-          
-        
--s/foo/bar/
-
-            
-
-        
-          But wait! Didn't the comment say that all occurrences of "foo" should be replaced? Our current job will only
-          take care of the first "foo" on each
-          page. For global substitution, we'll need to add the g option:
-        
-        
-        
-        
-          
-            
-          
-        
--s/foo/bar/g
-
-            
-
-        
-          Our complete filter now looks like this:
-        
-        
-        
-        
-          
-            
-+      Our complete filter now looks like this:
+
+      
+        
+          
-          
-        
+             FILTER: foo Replace all "foo" with "bar"
 s/foo/bar/g
 
-            
-
-        
-          Let's look at some real filters for more interesting examples. Here
-          you see a filter that protects against some common annoyances that
-          arise from JavaScript abuse. Let's look at its jobs one after the
-          other:
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      Let's look at some real filters for more interesting examples. Here
+      you see a filter that protects against some common annoyances that
+      arise from JavaScript abuse. Let's look at its jobs one after the
+      other:
+
+      
+        
+          
-          
-        
+             FILTER: js-annoyances Get rid of particularly annoying JavaScript abuse
 
 # Get rid of JavaScript referrer tracking. Test page: http://www.randomoddness.com/untitled.htm
 #
 s|(<script.*)document\.referrer(.*</script>)|$1"Not Your Business!"$2|Usg
 
-            
-
-        
-          Following the header line and a comment, you see the job. Note that
-          it uses | as the delimiter instead of /, because the pattern contains a forward
-          slash, which would otherwise have to be escaped by a backslash (\).
-        
-        
-          Now, let's examine the pattern: it starts with the text <script.* enclosed in parentheses. Since the dot
-          matches any character, and * means: "Match an arbitrary number of the element left of
-          myself", this matches "<script", followed by any text, i.e. it matches the whole
-          page, from the start of the first <script> tag.
-        
-        
-          That's more than we want, but the pattern continues: document\.referrer matches only the exact string
-          "document.referrer". The dot needed to
-          be escaped,
-          i.e. preceded by a backslash, to take away its special meaning as a
-          joker, and make it just a regular dot. So far, the meaning is:
-          Match from the start of the first <script> tag in a the page,
-          up to, and including, the text "document.referrer", if both are present in the page (and
-          appear in that order).
-        
-        
-          But there's still more pattern to go. The next element, again
-          enclosed in parentheses, is .*</script>. You already know what .* means, so the whole pattern translates to: Match
-          from the start of the first <script> tag in a page to the end
-          of the last <script> tag, provided that the text "document.referrer" appears somewhere in between.
-        
-        
-          This is still not the whole story, since we have ignored the
-          options and the parentheses: The portions of the page matched by
-          sub-patterns that are enclosed in parentheses, will be remembered
-          and be available through the variables $1, $2,
-          ... in the substitute. The U option
-          switches to ungreedy matching, which means that the first .* in the pattern will only "eat up" all text in between "<script" and the first occurrence of "document.referrer", and that the second .* will only span the text up to the first "</script>" tag. Furthermore, the s option says that the match may span multiple lines
-          in the page, and the g option again means
-          that the substitution is global.
-        
-        
-          So, to summarize, the pattern means: Match all scripts that contain
-          the text "document.referrer". Remember
-          the parts of the script from (and including) the start tag up to
-          (and excluding) the string "document.referrer" as $1,
-          and the part following that string, up to and including the closing
-          tag, as $2.
-        
-        
-          Now the pattern is deciphered, but wasn't this about substituting
-          things? So lets look at the substitute: $1"Not
-          Your Business!"$2 is easy to read: The text remembered as $1, followed by "Not Your
-          Business!" (including the quotation marks!), followed by
-          the text remembered as $2. This produces
-          an exact copy of the original string, with the middle part (the
-          "document.referrer") replaced by "Not Your Business!".
-        
-        
-          The whole job now reads: Replace "document.referrer" by "Not Your
-          Business!" wherever it appears inside a <script> tag.
-          Note that this job won't break JavaScript syntax, since both the
-          original and the replacement are syntactically valid string
-          objects. The script just won't have access to the referrer
-          information anymore.
-        
-        
-          We'll show you two other jobs from the JavaScript taming
-          department, but this time only point out the constructs of special
-          interest:
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      Following the header line and a comment, you see the job. Note that
+      it uses | as the delimiter instead of
+      /, because the pattern contains a forward
+      slash, which would otherwise have to be escaped by a backslash
+      (\).
+
+      Now, let's examine the pattern: it starts with the text <script.* enclosed in parentheses. Since the dot
+      matches any character, and * means:
+      "Match an arbitrary number of the element left of
+      myself", this matches "<script",
+      followed by any text, i.e. it
+      matches the whole page, from the start of the first <script>
+      tag.
+
+      That's more than we want, but the pattern continues: document\.referrer matches only the exact string
+      "document.referrer". The dot needed to be
+      escaped, i.e. preceded by a
+      backslash, to take away its special meaning as a joker, and make it
+      just a regular dot. So far, the meaning is: Match from the start of the
+      first <script> tag in a the page, up to, and including, the text
+      "document.referrer", if both are present in the page (and appear
+      in that order).
+
+      But there's still more pattern to go. The next element, again
+      enclosed in parentheses, is .*</script>.
+      You already know what .* means, so the whole
+      pattern translates to: Match from the start of the first <script>
+      tag in a page to the end of the last <script> tag, provided that
+      the text "document.referrer" appears
+      somewhere in between.
+
+      This is still not the whole story, since we have ignored the options
+      and the parentheses: The portions of the page matched by sub-patterns
+      that are enclosed in parentheses, will be remembered and be available
+      through the variables $1, $2, ... in the
+      substitute. The U option switches to ungreedy
+      matching, which means that the first .* in the
+      pattern will only "eat up" all text in
+      between "<script" and the first occurrence of "document.referrer", and that the second .* will only span the text up to the first "</script>" tag. Furthermore, the s option says that the match may span multiple lines in
+      the page, and the g option again means that
+      the substitution is global.
+
+      So, to summarize, the pattern means: Match all scripts that contain
+      the text "document.referrer". Remember the
+      parts of the script from (and including) the start tag up to (and
+      excluding) the string "document.referrer" as
+      $1, and the part following that string, up to
+      and including the closing tag, as $2.
+
+      Now the pattern is deciphered, but wasn't this about substituting
+      things? So lets look at the substitute: $1"Not Your
+      Business!"$2 is easy to read: The text remembered as $1, followed by "Not Your
+      Business!" (including
+      the quotation marks!), followed by the text remembered as $2. This produces an exact copy of the original string,
+      with the middle part (the "document.referrer") replaced by "Not Your Business!".
+
+      The whole job now reads: Replace "document.referrer" by "Not Your
+      Business!" wherever it appears inside a <script> tag. Note
+      that this job won't break JavaScript syntax, since both the original
+      and the replacement are syntactically valid string objects. The script
+      just won't have access to the referrer information anymore.
+
+      We'll show you two other jobs from the JavaScript taming department,
+      but this time only point out the constructs of special interest:
+
+      
+        
+          
-          
-        
+             # The status bar is for displaying link targets, not pointless blahblah
 #
 s/window\.status\s*=\s*(['"]).*?\1/dUmMy=1/ig
 
-            
-
-        
-          \s stands for whitespace characters
-          (space, tab, newline, carriage return, form feed), so that \s* means: "zero or more
-          whitespace". The ? in .*? makes this matching of arbitrary text ungreedy.
-          (Note that the U option is not set). The
-          ['"] construct means: "a single or a double quote". Finally, \1 is a back-reference to the first
-          parenthesis just like $1 above, with the
-          difference that in the pattern, a backslash indicates a
-          back-reference, whereas in the substitute, it's the dollar.
-        
-        
-          So what does this job do? It replaces assignments of single- or
-          double-quoted strings to the "window.status" object with a dummy assignment
-          (using a variable name that is hopefully odd enough not to conflict
-          with real variables in scripts). Thus, it catches many cases where
-          e.g. pointless descriptions are displayed in the status bar instead
-          of the link target when you move your mouse over links.
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      \s stands for whitespace characters (space,
+      tab, newline, carriage return, form feed), so that \s* means: "zero or more
+      whitespace". The ? in .*? makes this matching of arbitrary text ungreedy.
+      (Note that the U option is not set). The
+      ['"] construct means: "a
+      single or a double
+      quote". Finally, \1 is a back-reference
+      to the first parenthesis just like $1 above,
+      with the difference that in the pattern, a backslash indicates a
+      back-reference, whereas in the substitute, it's the dollar.
+
+      So what does this job do? It replaces assignments of single- or
+      double-quoted strings to the "window.status"
+      object with a dummy assignment (using a variable name that is hopefully
+      odd enough not to conflict with real variables in scripts). Thus, it
+      catches many cases where e.g. pointless descriptions are displayed in
+      the status bar instead of the link target when you move your mouse over
+      links.
+
+      
+        
+          
-          
-        
+             # Kill OnUnload popups. Yummy. Test: http://www.zdnet.com/zdsubs/yahoo/tree/yfs.html
 #
 s/(<body [^>]*)onunload(.*>)/$1never$2/iU
 
-            
-
-        
-          Including the OnUnload event binding in the HTML DOM was a
-          CRIME. When I
-          close a browser window, I want it to close and die. Basta. This job
-          replaces the "onunload" attribute in
-          "<body>" tags with the dummy word
-          never. Note that the i option makes the pattern matching
-          case-insensitive. Also note that ungreedy matching alone doesn't
-          always guarantee a minimal match: In the first parenthesis, we had
-          to use [^>]* instead of .* to prevent the match from exceeding the
-          <body> tag if it doesn't contain "OnUnload", but the page's content does.
-        
-        
-          The last example is from the fun department:
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      Including the OnUnload event binding in the HTML DOM was a
+      CRIME. When I close a browser
+      window, I want it to close and die. Basta. This job replaces the
+      "onunload" attribute in "<body>" tags with the dummy word never. Note that the i option
+      makes the pattern matching case-insensitive. Also note that ungreedy
+      matching alone doesn't always guarantee a minimal match: In the first
+      parenthesis, we had to use [^>]* instead of
+      .* to prevent the match from exceeding the
+      <body> tag if it doesn't contain "OnUnload", but the page's content does.
+
+      The last example is from the fun department:
+
+      
+        
+          
-          
-        
+             FILTER: fun Fun text replacements
 
 # Spice the daily news:
 #
 s/microsoft(?!\.com)/MicroSuck/ig
 
-            
-
-        
-          Note the (?!\.com) part (a so-called
-          negative lookahead) in the job's pattern, which means: Don't match,
-          if the string ".com" appears directly
-          following "microsoft" in the page. This
-          prevents links to microsoft.com from being trashed, while still
-          replacing the word everywhere else.
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      Note the (?!\.com) part (a so-called
+      negative lookahead) in the job's pattern, which means: Don't match, if
+      the string ".com" appears directly following
+      "microsoft" in the page. This prevents links
+      to microsoft.com from being trashed, while still replacing the word
+      everywhere else.
+
+      
+        
+          
-          
-        
+             # Buzzword Bingo (example for extended regex syntax)
 #
 s* industry[ -]leading \
@@ -469,539 +416,429 @@ s* industry[ -]leading \
 *<font color="red"><b>BINGO!</b></font> \
 *igx
 
-            
-
-        
-          The x option in this job turns on extended
-          syntax, and allows for e.g. the liberal use of (non-interpreted!)
-          whitespace for nicer formatting.
-        
-        
-          You get the idea?
-        
-      
-      
-        
-          9.2. The Pre-defined Filters
-        
-        
-          The distribution default.filter file
-          contains a selection of pre-defined filters for your convenience:
-        
-        
-          
-            
-              js-annoyances
-            
-            
-              
-                The purpose of this filter is to get rid of particularly
-                annoying JavaScript abuse. To that end, it
-              
-              
-                
-                  
-                    replaces JavaScript references to the browser's referrer
-                    information with the string "Not Your Business!". This
-                    compliments the hide-referrer
-                    action on the content level.
-                  
-                
-                
-                  
-                    removes the bindings to the DOM's unload event which we feel has no
-                    right to exist and is responsible for most "exit consoles", i.e. nasty windows that
-                    pop up when you close another one.
-                  
-                
-                
-                  
-                    removes code that causes new windows to be opened with
-                    undesired properties, such as being full-screen,
-                    non-resizeable, without location, status or menu bar etc.
-                  
-                
-              
-
-              
-                Use with caution. This is an aggressive filter, and can break
-                sites that rely heavily on JavaScript.
-              
-            
-            
-              js-events
-            
-            
-              
-                This is a very radical measure. It removes virtually all
-                JavaScript event bindings, which means that scripts can not
-                react to user actions such as mouse movements or clicks,
-                window resizing etc, anymore. Use with caution!
-              
-              
-                We strongly
-                discourage using this filter as a default since it
-                breaks many legitimate scripts. It is meant for use only on
-                extra-nasty sites (should you really need to go there).
-              
-            
-            
-              html-annoyances
-            
-            
-              
-                This filter will undo many common instances of HTML based
-                abuse.
-              
-              
-                The BLINK and MARQUEE tags are neutralized (yeah baby!), and
-                browser windows will be created as resizeable (as of course
-                they should be!), and will have location, scroll and menu
-                bars -- even if specified otherwise.
-              
-            
-            
-              content-cookies
-            
-            
-              
-                Most cookies are set in the HTTP dialog, where they can be
-                intercepted by the crunch-incoming-cookies
-                and crunch-outgoing-cookies
-                actions. But web sites increasingly make use of HTML meta
-                tags and JavaScript to sneak cookies to the browser on the
-                content level.
-              
-              
-                This filter disables most HTML and JavaScript code that reads
-                or sets cookies. It cannot detect all clever uses of these
-                types of code, so it should not be relied on as an absolute
-                fix. Use it wherever you would also use the cookie crunch
-                actions.
-              
-            
-            
-              refresh
-              tags
-            
-            
-              
-                Disable any refresh tags if the interval is greater than nine
-                seconds (so that redirections done via refresh tags are not
-                destroyed). This is useful for dial-on-demand setups, or for
-                those who find this HTML feature annoying.
-              
-            
-            
-              unsolicited-popups
-            
-            
-              
-                This filter attempts to prevent only "unsolicited" pop-up windows from opening, yet
-                still allow pop-up windows that the user has explicitly
-                chosen to open. It was added in version 3.0.1, as an
-                improvement over earlier such filters.
-              
-              
-                Technical note: The filter works by redefining the
-                window.open JavaScript function to a dummy function, PrivoxyWindowOpen(), during the loading
-                and rendering phase of each HTML page access, and restoring
-                the function afterward.
-              
-              
-                This is recommended only for browsers that cannot perform
-                this function reliably themselves. And be aware that some
-                sites require such windows in order to function normally. Use
-                with caution.
-              
-            
-            
-              all-popups
-            
-            
-              
-                Attempt to prevent all pop-up windows from opening. Note
-                this should be used with even more discretion than the above,
-                since it is more likely to break some sites that require
-                pop-ups for normal usage. Use with caution.
-              
-            
-            
-              img-reorder
-            
-            
-              
-                This is a helper filter that has no value if used alone. It
-                makes the banners-by-size and banners-by-link (see below) filters more
-                effective and should be enabled together with them.
-              
-            
-            
-              banners-by-size
-            
-            
-              
-                This filter removes image tags purely based on what size they
-                are. Fortunately for us, many ads and banner images tend to
-                conform to certain standardized sizes, which makes this
-                filter quite effective for ad stripping purposes.
-              
-              
-                Occasionally this filter will cause false positives on images
-                that are not ads, but just happen to be of one of the
-                standard banner sizes.
-              
-              
-                Recommended only for those who require extreme ad blocking.
-                The default block rules should catch 95+% of all ads without this
-                filter enabled.
-              
-            
-            
-              banners-by-link
-            
-            
-              
-                This is an experimental filter that attempts to kill any
-                banners if their URLs seem to point to known or suspected
-                click trackers. It is currently not of much value and is not
-                recommended for use by default.
-              
-            
-            
-              webbugs
-            
-            
-              
-                Webbugs are small, invisible images (technically 1X1 GIF
-                images), that are used to track users across websites, and
-                collect information on them. As an HTML page is loaded by the
-                browser, an embedded image tag causes the browser to contact
-                a third-party site, disclosing the tracking information
-                through the requested URL and/or cookies for that third-party
-                domain, without the user ever becoming aware of the
-                interaction with the third-party site. HTML-ized spam also
-                uses a similar technique to verify email addresses.
-              
-              
-                This filter removes the HTML code that loads such "webbugs".
-              
-            
-            
-              tiny-textforms
-            
-            
-              
-                A rather special-purpose filter that can be used to enlarge
-                textareas (those multi-line text boxes in web forms) and turn
-                off hard word wrap in them. It was written for the
-                sourceforge.net tracker system where such boxes are a
-                nuisance, but it can be handy on other sites, too.
-              
-              
-                It is not recommended to use this filter as a default.
-              
-            
-            
-              jumping-windows
-            
-            
-              
-                Many consider windows that move, or resize themselves to be
-                abusive. This filter neutralizes the related JavaScript code.
-                Note that some sites might not display or behave as intended
-                when using this filter. Use with caution.
-              
-            
-            
-              frameset-borders
-            
-            
-              
-                Some web designers seem to assume that everyone in the world
-                will view their web sites using the same browser brand and
-                version, screen resolution etc, because only that assumption
-                could explain why they'd use static frame sizes, yet prevent
-                their frames from being resized by the user, should they be
-                too small to show their whole content.
-              
-              
-                This filter removes the related HTML code. It should only be
-                applied to sites which need it.
-              
-            
-            
-              demoronizer
-            
-            
-              
-                Many Microsoft products that generate HTML use non-standard
-                extensions (read: violations) of the ISO 8859-1 aka Latin-1
-                character set. This can cause those HTML documents to display
-                with errors on standard-compliant platforms.
-              
-              
-                This filter translates the MS-only characters into Latin-1
-                equivalents. It is not necessary when using MS products, and
-                will cause corruption of all documents that use 8-bit
-                character sets other than Latin-1. It's mostly worthwhile for
-                Europeans on non-MS platforms, if weird garbage characters
-                sometimes appear on some pages, or user agents that don't
-                correct for this on the fly.
-              
-            
-            
-              shockwave-flash
-            
-            
-              
-                A filter for shockwave haters. As the name suggests, this
-                filter strips code out of web pages that is used to embed
-                shockwave flash objects.
-              
-              
-              
-            
-            
-              quicktime-kioskmode
-            
-            
-              
-                Change HTML code that embeds Quicktime objects so that
-                kioskmode, which prevents saving, is disabled.
-              
-            
-            
-              fun
-            
-            
-              
-                Text replacements for subversive browsing fun. Make fun of
-                your favorite Monopolist or play buzzword bingo.
-              
-            
-            
-              crude-parental
-            
-            
-              
-                A demonstration-only filter that shows how Privoxy can be used to delete web
-                content on a keyword basis.
-              
-            
-            
-              ie-exploits
-            
-            
-              
-                An experimental collection of text replacements to disable
-                malicious HTML and JavaScript code that exploits known
-                security holes in Internet Explorer.
-              
-              
-                Presently, it only protects against Nimda and a cross-site
-                scripting bug, and would need active maintenance to provide
-                more substantial protection.
-              
-            
-            
-              site-specifics
-            
-            
-              
-                Some web sites have very specific problems, the cure for
-                which doesn't apply anywhere else, or could even cause damage
-                on other sites.
-              
-              
-                This is a collection of such site-specific cures which should
-                only be applied to the sites they were intended for, which is
-                what the supplied default.action
-                file does. Users shouldn't need to change anything regarding
-                this filter.
-              
-            
-            
-              google
-            
-            
-              
-                A CSS based block for Google text ads. Also removes a width
-                limitation and the toolbar advertisement.
-              
-            
-            
-              yahoo
-            
-            
-              
-                Another CSS based block, this time for Yahoo text ads. And
-                removes a width limitation as well.
-              
-            
-            
-              msn
-            
-            
-              
-                Another CSS based block, this time for MSN text ads. And
-                removes tracking URLs, as well as a width limitation.
-              
-            
-            
-              blogspot
-            
-            
-              
-                Cleans up some Blogspot blogs. Read the fine print before
-                using this one!
-              
-              
-                This filter also intentionally removes some navigation stuff
-                and sets the page width to 100%. As a result, some rounded
-                "corners" would appear to early or
-                not at all and as fixing this would require a browser that
-                understands background-size (CSS3), they are removed instead.
-              
-            
-            
-              xml-to-html
-            
-            
-              
-                Server-header filter to change the Content-Type from xml to
-                html.
-              
-            
-            
-              html-to-xml
-            
-            
-              
-                Server-header filter to change the Content-Type from html to
-                xml.
-              
-            
-            
-              no-ping
-            
-            
-              
-                Removes the non-standard ping
-                attribute from anchor and area HTML tags.
-              
-            
-            
-              hide-tor-exit-notation
-            
-            
-              
-                Client-header filter to remove the Tor
-                exit node notation found in Host and Referer headers.
-              
-              
-                If Privoxy and Tor are chained and Privoxy is configured to use socks4a,
-                one can use "http://www.example.org.foobar.exit/" to
-                access the host "www.example.org"
-                through the Tor exit node "foobar".
-              
-              
-                As the HTTP client isn't aware of this notation, it treats
-                the whole string "www.example.org.foobar.exit" as host and uses
-                it for the "Host" and "Referer" headers. From the server's point of
-                view the resulting headers are invalid and can cause
-                problems.
-              
-              
-                An invalid "Referer" header can
-                trigger "hot-linking" protections,
-                an invalid "Host" header will make
-                it impossible for the server to find the right vhost (several
-                domains hosted on the same IP address).
-              
-              
-                This client-header filter removes the "foo.exit" part in those headers to prevent
-                the mentioned problems. Note that it only modifies the HTTP
-                headers, it doesn't make it impossible for the server to
-                detect your Tor exit node based on the
-                IP address the request is coming from.
-              
-            
-          
-        
-      
-    
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-            Prev
-          
-            Home
-          
-            Next
-          

-            Actions Files
-          
-             
-          
-            Privoxy's Template Files
           
         
       
+
+      The x option in this job turns on extended
+      syntax, and allows for e.g. the liberal use of (non-interpreted!)
+      whitespace for nicer formatting.
+
+      You get the idea?
     
-  
-
 
+    
+      9.2. The Pre-defined Filters
+
+      The distribution default.filter file
+      contains a selection of pre-defined filters for your convenience:
+
+      
+        
+          js-annoyances
+
+          
+            The purpose of this filter is to get rid of particularly
+            annoying JavaScript abuse. To that end, it
+
+            
+              
+                replaces JavaScript references to the browser's referrer
+                information with the string "Not Your Business!". This
+                compliments the hide-referrer
+                action on the content level.
+              
+
+              
+                removes the bindings to the DOM's unload event which we feel has no right to
+                exist and is responsible for most "exit
+                consoles", i.e. nasty windows that pop up when you
+                close another one.
+              
+
+              
+                removes code that causes new windows to be opened with
+                undesired properties, such as being full-screen,
+                non-resizeable, without location, status or menu bar etc.
+              
+            
+
+            Use with caution. This is an aggressive filter, and can break
+            sites that rely heavily on JavaScript.
+          
+
+          js-events
+
+          
+            This is a very radical measure. It removes virtually all
+            JavaScript event bindings, which means that scripts can not react
+            to user actions such as mouse movements or clicks, window
+            resizing etc, anymore. Use with caution!
+
+            We strongly
+            discourage using this filter as a default since it breaks
+            many legitimate scripts. It is meant for use only on extra-nasty
+            sites (should you really need to go there).
+          
+
+          html-annoyances
+
+          
+            This filter will undo many common instances of HTML based
+            abuse.
+
+            The BLINK and MARQUEE tags are neutralized (yeah baby!), and
+            browser windows will be created as resizeable (as of course they
+            should be!), and will have location, scroll and menu bars -- even
+            if specified otherwise.
+          
+
+          content-cookies
+
+          
+            Most cookies are set in the HTTP dialog, where they can be
+            intercepted by the crunch-incoming-cookies
+            and crunch-outgoing-cookies
+            actions. But web sites increasingly make use of HTML meta tags
+            and JavaScript to sneak cookies to the browser on the content
+            level.
+
+            This filter disables most HTML and JavaScript code that reads
+            or sets cookies. It cannot detect all clever uses of these types
+            of code, so it should not be relied on as an absolute fix. Use it
+            wherever you would also use the cookie crunch actions.
+          
+
+          refresh tags
+
+          
+            Disable any refresh tags if the interval is greater than nine
+            seconds (so that redirections done via refresh tags are not
+            destroyed). This is useful for dial-on-demand setups, or for
+            those who find this HTML feature annoying.
+          
+
+          unsolicited-popups
+
+          
+            This filter attempts to prevent only "unsolicited" pop-up windows from opening, yet
+            still allow pop-up windows that the user has explicitly chosen to
+            open. It was added in version 3.0.1, as an improvement over
+            earlier such filters.
+
+            Technical note: The filter works by redefining the window.open
+            JavaScript function to a dummy function, PrivoxyWindowOpen(), during the loading and
+            rendering phase of each HTML page access, and restoring the
+            function afterward.
+
+            This is recommended only for browsers that cannot perform this
+            function reliably themselves. And be aware that some sites
+            require such windows in order to function normally. Use with
+            caution.
+          
+
+          all-popups
+
+          
+            Attempt to prevent all pop-up windows from opening.
+            Note this should be used with even more discretion than the
+            above, since it is more likely to break some sites that require
+            pop-ups for normal usage. Use with caution.
+          
+
+          img-reorder
+
+          
+            This is a helper filter that has no value if used alone. It
+            makes the banners-by-size and banners-by-link (see below) filters more effective
+            and should be enabled together with them.
+          
+
+          banners-by-size
+
+          
+            This filter removes image tags purely based on what size they
+            are. Fortunately for us, many ads and banner images tend to
+            conform to certain standardized sizes, which makes this filter
+            quite effective for ad stripping purposes.
+
+            Occasionally this filter will cause false positives on images
+            that are not ads, but just happen to be of one of the standard
+            banner sizes.
+
+            Recommended only for those who require extreme ad blocking.
+            The default block rules should catch 95+% of all ads without this filter enabled.
+          
+
+          banners-by-link
+
+          
+            This is an experimental filter that attempts to kill any
+            banners if their URLs seem to point to known or suspected click
+            trackers. It is currently not of much value and is not
+            recommended for use by default.
+          
+
+          webbugs
+
+          
+            Webbugs are small, invisible images (technically 1X1 GIF
+            images), that are used to track users across websites, and
+            collect information on them. As an HTML page is loaded by the
+            browser, an embedded image tag causes the browser to contact a
+            third-party site, disclosing the tracking information through the
+            requested URL and/or cookies for that third-party domain, without
+            the user ever becoming aware of the interaction with the
+            third-party site. HTML-ized spam also uses a similar technique to
+            verify email addresses.
+
+            This filter removes the HTML code that loads such "webbugs".
+          
+
+          tiny-textforms
+
+          
+            A rather special-purpose filter that can be used to enlarge
+            textareas (those multi-line text boxes in web forms) and turn off
+            hard word wrap in them. It was written for the sourceforge.net
+            tracker system where such boxes are a nuisance, but it can be
+            handy on other sites, too.
+
+            It is not recommended to use this filter as a default.
+          
+
+          jumping-windows
+
+          
+            Many consider windows that move, or resize themselves to be
+            abusive. This filter neutralizes the related JavaScript code.
+            Note that some sites might not display or behave as intended when
+            using this filter. Use with caution.
+          
+
+          frameset-borders
+
+          
+            Some web designers seem to assume that everyone in the world
+            will view their web sites using the same browser brand and
+            version, screen resolution etc, because only that assumption
+            could explain why they'd use static frame sizes, yet prevent
+            their frames from being resized by the user, should they be too
+            small to show their whole content.
+
+            This filter removes the related HTML code. It should only be
+            applied to sites which need it.
+          
+
+          demoronizer
+
+          
+            Many Microsoft products that generate HTML use non-standard
+            extensions (read: violations) of the ISO 8859-1 aka Latin-1
+            character set. This can cause those HTML documents to display
+            with errors on standard-compliant platforms.
+
+            This filter translates the MS-only characters into Latin-1
+            equivalents. It is not necessary when using MS products, and will
+            cause corruption of all documents that use 8-bit character sets
+            other than Latin-1. It's mostly worthwhile for Europeans on
+            non-MS platforms, if weird garbage characters sometimes appear on
+            some pages, or user agents that don't correct for this on the
+            fly.
+          
+
+          shockwave-flash
+
+          
+            A filter for shockwave haters. As the name suggests, this
+            filter strips code out of web pages that is used to embed
+            shockwave flash objects.
+          
+
+          quicktime-kioskmode
+
+          
+            Change HTML code that embeds Quicktime objects so that
+            kioskmode, which prevents saving, is disabled.
+          
+
+          fun
+
+          
+            Text replacements for subversive browsing fun. Make fun of
+            your favorite Monopolist or play buzzword bingo.
+          
+
+          crude-parental
+
+          
+            A demonstration-only filter that shows how Privoxy can be used to delete web content on
+            a keyword basis.
+          
+
+          ie-exploits
+
+          
+            An experimental collection of text replacements to disable
+            malicious HTML and JavaScript code that exploits known security
+            holes in Internet Explorer.
+
+            Presently, it only protects against Nimda and a cross-site
+            scripting bug, and would need active maintenance to provide more
+            substantial protection.
+          
+
+          site-specifics
+
+          
+            Some web sites have very specific problems, the cure for which
+            doesn't apply anywhere else, or could even cause damage on other
+            sites.
+
+            This is a collection of such site-specific cures which should
+            only be applied to the sites they were intended for, which is
+            what the supplied default.action file
+            does. Users shouldn't need to change anything regarding this
+            filter.
+          
+
+          google
+
+          
+            A CSS based block for Google text ads. Also removes a width
+            limitation and the toolbar advertisement.
+          
+
+          yahoo
+
+          
+            Another CSS based block, this time for Yahoo text ads. And
+            removes a width limitation as well.
+          
+
+          msn
+
+          
+            Another CSS based block, this time for MSN text ads. And
+            removes tracking URLs, as well as a width limitation.
+          
+
+          blogspot
+
+          
+            Cleans up some Blogspot blogs. Read the fine print before
+            using this one!
+
+            This filter also intentionally removes some navigation stuff
+            and sets the page width to 100%. As a result, some rounded
+            "corners" would appear to early or not
+            at all and as fixing this would require a browser that
+            understands background-size (CSS3), they are removed instead.
+          
+
+          xml-to-html
+
+          
+            Server-header filter to change the Content-Type from xml to
+            html.
+          
+
+          html-to-xml
+
+          
+            Server-header filter to change the Content-Type from html to
+            xml.
+          
+
+          no-ping
+
+          
+            Removes the non-standard ping
+            attribute from anchor and area HTML tags.
+          
+
+          hide-tor-exit-notation
+
+          
+            Client-header filter to remove the Tor
+            exit node notation found in Host and Referer headers.
+
+            If Privoxy and Tor are chained and Privoxy is configured to use socks4a, one
+            can use "http://www.example.org.foobar.exit/" to access
+            the host "www.example.org" through the
+            Tor exit node "foobar".
+
+            As the HTTP client isn't aware of this notation, it treats the
+            whole string "www.example.org.foobar.exit" as host and uses it
+            for the "Host" and "Referer" headers. From the server's point of view
+            the resulting headers are invalid and can cause problems.
+
+            An invalid "Referer" header can
+            trigger "hot-linking" protections, an
+            invalid "Host" header will make it
+            impossible for the server to find the right vhost (several
+            domains hosted on the same IP address).
+
+            This client-header filter removes the "foo.exit" part in those headers to prevent the
+            mentioned problems. Note that it only modifies the HTTP headers,
+            it doesn't make it impossible for the server to detect your
+            Tor exit node based on the IP address the
+            request is coming from.
+          
+        
+      
+    
+  
+
+  
+    
+
+    
+      
+        
+
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Actions Files   Privoxy's Template
+        Files
+  
+
+
diff --git a/doc/webserver/user-manual/index.html b/doc/webserver/user-manual/index.html
index d2f17e42..1dd8cc37 100644
--- a/doc/webserver/user-manual/index.html
+++ b/doc/webserver/user-manual/index.html
@@ -1,771 +1,621 @@
-
+
+
 
-  
-    
-    
-      Privoxy 3.0.18 User Manual
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          Privoxy 3.0.18 User Manual
-        
-        
-          _{Copyright © 2001-2011 by Privoxy
-          Developers}

-        
-        
-          $Id: index.html,v 1.77 2011/08/26 16:14:24 fabiankeil Exp $

-        
-        
-          
-          
-            The Privoxy User Manual gives users
-            information on how to install, configure and use Privoxy.
-          
-          
-            Privoxy is a non-caching web proxy with advanced filtering
-            capabilities for enhancing privacy, modifying web page data and
-            HTTP headers, controlling access, and removing ads and other
-            obnoxious Internet junk. Privoxy has a flexible configuration and
-            can be customized to suit individual needs and tastes. It has
-            application for both stand-alone systems and multi-user networks.
-          
-          
-            Privoxy is Free Software and licensed under the GNU GPLv2.
-          
-          
-            Privoxy is an associated project of Software in the Public
-            Interest (SPI).
-          
-          
-            Helping hands and donations are welcome:
-          
-          
-            
-              
-                http://www.privoxy.org/faq/general.html#PARTICIPATE
-              
-            
-            
-              
-                http://www.privoxy.org/faq/general.html#DONATE
-              
-            
-          
-
-          
-            You can find the latest version of the Privoxy User Manual at http://www.privoxy.org/user-manual/. Please see the Contact section on how to contact the
-            developers.
-          
-        
-        
-      
-      
-        
-          
-            Table of Contents
-          
-          
-            1. Introduction
-          
-          
-            
-              
-                1.1. Features
-              
-            
-          
-          
-            2. Installation
-          
-          
-            
-              
-                2.1. Binary
-                Packages
-              
-              
-                
-                  
-                    2.1.1. Red Hat and
-                    Fedora RPMs
-                  
-                  
-                    2.1.2. Debian and
-                    Ubuntu
-                  
-                  
-                    2.1.3. Windows
-                  
-                  
-                    2.1.4. Solaris
-                  
-                  
-                    2.1.5. OS/2
-                  
-                  
-                    2.1.6. Mac
-                    OS X
-                  
-                  
-                    2.1.7. AmigaOS
-                  
-                  
-                    2.1.8. FreeBSD
-                  
-                  
-                    2.1.9. Gentoo
-                  
-                
-              
-              
-                2.2. Building
-                from Source
-              
-              
-                2.3. Keeping your
-                Installation Up-to-Date
-              
-            
-          
-          
-            3. What's New in this Release
-          
-          
-            
-              
-                3.1. Note to
-                Upgraders
-              
-            
-          
-          
-            4. Quickstart to Using Privoxy
-          
-          
-            
-              
-                4.1. Quickstart to Ad
-                Blocking
-              
-            
-          
-          
-            5. Starting Privoxy
-          
-          
-            
-              
-                5.1. Red Hat and
-                Fedora
-              
-              
-                5.2. Debian
-              
-              
-                5.3. Windows
-              
-              
-                5.4. Solaris, NetBSD,
-                FreeBSD, HP-UX and others
-              
-              
-                5.5. OS/2
-              
-              
-                5.6. Mac OS X
-              
-              
-                5.7. AmigaOS
-              
-              
-                5.8. Gentoo
-              
-              
-                5.9. Command Line
-                Options
-              
-            
-          
-          
-            6. Privoxy Configuration
-          
-          
-            
-              
-                6.1. Controlling Privoxy
-                with Your Web Browser
-              
-              
-                6.2. Configuration
-                Files Overview
-              
-            
-          
-          
-            7. The Main Configuration File
-          
-          
-            
-              
-                7.1. Local Set-up
-                Documentation
-              
-              
-                
-                  
-                    7.1.1. user-manual
-                  
-                  
-                    7.1.2. trust-info-url
-                  
-                  
-                    7.1.3. admin-address
-                  
-                  
-                    7.1.4. proxy-info-url
-                  
-                
-              
-              
-                7.2. Configuration and Log
-                File Locations
-              
-              
-                
-                  
-                    7.2.1. confdir
-                  
-                  
-                    7.2.2. templdir
-                  
-                  
-                    7.2.3. logdir
-                  
-                  
-                    7.2.4. actionsfile
-                  
-                  
-                    7.2.5. filterfile
-                  
-                  
-                    7.2.6. logfile
-                  
-                  
-                    7.2.7. trustfile
-                  
-                
-              
-              
-                7.3. Debugging
-              
-              
-                
-                  
-                    7.3.1. debug
-                  
-                  
-                    7.3.2. single-threaded
-                  
-                  
-                    7.3.3. hostname
-                  
-                
-              
-              
-                7.4. Access Control and
-                Security
-              
-              
-                
-                  
-                    7.4.1. listen-address
-                  
-                  
-                    7.4.2. toggle
-                  
-                  
-                    7.4.3. enable-remote-toggle
-                  
-                  
-                    7.4.4. enable-remote-http-toggle
-                  
-                  
-                    7.4.5. enable-edit-actions
-                  
-                  
-                    7.4.6. enforce-blocks
-                  
-                  
-                    7.4.7. ACLs: permit-access and
-                    deny-access
-                  
-                  
-                    7.4.8. buffer-limit
-                  
-                
-              
-              
-                7.5. Forwarding
-              
-              
-                
-                  
-                    7.5.1. forward
-                  
-                  
-                    7.5.2. forward-socks4,
-                    forward-socks4a and forward-socks5
-                  
-                  
-                    7.5.3. Advanced
-                    Forwarding Examples
-                  
-                  
-                    7.5.4. forwarded-connect-retries
-                  
-                
-              
-              
-                7.6. Miscellaneous
-              
-              
-                
-                  
-                    7.6.1. accept-intercepted-requests
-                  
-                  
-                    7.6.2. allow-cgi-request-crunching
-                  
-                  
-                    7.6.3. split-large-forms
-                  
-                  
-                    7.6.4. keep-alive-timeout
-                  
-                  
-                    7.6.5. default-server-timeout
-                  
-                  
-                    7.6.6. connection-sharing
-                  
-                  
-                    7.6.7. socket-timeout
-                  
-                  
-                    7.6.8. max-client-connections
-                  
-                  
-                    7.6.9. handle-as-empty-doc-returns-ok
-                  
-                  
-                    7.6.10. enable-compression
-                  
-                  
-                    7.6.11. compression-level
-                  
-                
-              
-              
-                7.7. Windows GUI
-                Options
-              
-            
-          
-          
-            8. Actions Files
-          
-          
-            
-              
-                8.1. Finding the Right
-                Mix
-              
-              
-                8.2. How to Edit
-              
-              
-                8.3. How Actions
-                are Applied to Requests
-              
-              
-                8.4. Patterns
-              
-              
-                
-                  
-                    8.4.1. The Domain
-                    Pattern
-                  
-                  
-                    8.4.2. The Path
-                    Pattern
-                  
-                  
-                    8.4.3. The Tag
-                    Pattern
-                  
-                
-              
-              
-                8.5. Actions
-              
-              
-                
-                  
-                    8.5.1. add-header
-                  
-                  
-                    8.5.2. block
-                  
-                  
-                    8.5.3. change-x-forwarded-for
-                  
-                  
-                    8.5.4. client-header-filter
-                  
-                  
-                    8.5.5. client-header-tagger
-                  
-                  
-                    8.5.6. content-type-overwrite
-                  
-                  
-                    8.5.7. crunch-client-header
-                  
-                  
-                    8.5.8. crunch-if-none-match
-                  
-                  
-                    8.5.9. crunch-incoming-cookies
-                  
-                  
-                    8.5.10. crunch-server-header
-                  
-                  
-                    8.5.11. crunch-outgoing-cookies
-                  
-                  
-                    8.5.12. deanimate-gifs
-                  
-                  
-                    8.5.13. downgrade-http-version
-                  
-                  
-                    8.5.14. fast-redirects
-                  
-                  
-                    8.5.15. filter
-                  
-                  
-                    8.5.16. force-text-mode
-                  
-                  
-                    8.5.17. forward-override
-                  
-                  
-                    8.5.18. handle-as-empty-document
-                  
-                  
-                    8.5.19. handle-as-image
-                  
-                  
-                    8.5.20. hide-accept-language
-                  
-                  
-                    8.5.21. hide-content-disposition
-                  
-                  
-                    8.5.22. hide-if-modified-since
-                  
-                  
-                    8.5.23. hide-from-header
-                  
-                  
-                    8.5.24. hide-referrer
-                  
-                  
-                    8.5.25. hide-user-agent
-                  
-                  
-                    8.5.26. limit-connect
-                  
-                  
-                    8.5.27. prevent-compression
-                  
-                  
-                    8.5.28. overwrite-last-modified
-                  
-                  
-                    8.5.29. redirect
-                  
-                  
-                    8.5.30. server-header-filter
-                  
-                  
-                    8.5.31. server-header-tagger
-                  
-                  
-                    8.5.32. session-cookies-only
-                  
-                  
-                    8.5.33. set-image-blocker
-                  
-                  
-                    8.5.34. Summary
-                  
-                
-              
-              
-                8.6. Aliases
-              
-              
-                8.7. Actions Files
-                Tutorial
-              
-              
-                
-                  
-                    8.7.1. match-all.action
-                  
-                  
-                    8.7.2. default.action
-                  
-                  
-                    8.7.3. user.action
-                  
-                
-              
-            
-          
-          
-            9. Filter Files
-          
-          
-            
-              
-                9.1. Filter File
-                Tutorial
-              
-              
-                9.2. The
-                Pre-defined Filters
-              
-            
-          
-          
-            10. Privoxy's Template Files
-          
-          
-            11. Contacting the Developers, Bug
-            Reporting and Feature Requests
-          
-          
-            
-              
-                11.1. Get Support
-              
-              
-                11.2. Reporting Problems
-              
-              
-                
-                  
-                    11.2.1. Reporting Ads
-                    or Other Configuration Problems
-                  
-                  
-                    11.2.2. Reporting
-                    Bugs
-                  
-                
-              
-              
-                11.3. Request New
-                Features
-              
-              
-                11.4. Mailing Lists
-              
-            
-          
-          
-            12. Privoxy Copyright, License and
-            History
-          
-          
-            
-              
-                12.1. License
-              
-              
-                12.2. History
-              
-              
-                12.3. Authors
-              
-            
-          
-          
-            13. See Also
-          
-          
-            14. Appendix
-          
-          
-            
-              
-                14.1. Regular Expressions
-              
-              
-                14.2. Privoxy's Internal
-                Pages
-              
-              
-                
-                  
-                    14.2.1. Bookmarklets
-                  
-                
-              
-              
-                14.3. Chain of Events
-              
-              
-                14.4. Troubleshooting:
-                Anatomy of an Action
-              
-            
-          
-        
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  hr.c2 {text-align: left}
+  dt.c1 {font-weight: bold}
+  
+
+
+
+  
+    
+      Privoxy 3.0.18 User
+      Manual
+
+      _{Copyright ©
+      2001-2011 by Privoxy
+      Developers}

+
+      $Id: user-manual.sgml,v 2.136 2011/10/14 16:53:10
+      fabiankeil Exp $

+
+      
+        
+
+        The Privoxy User Manual gives users
+        information on how to install, configure and use Privoxy.
+
+        Privoxy is a non-caching web proxy with advanced filtering
+        capabilities for enhancing privacy, modifying web page data and HTTP
+        headers, controlling access, and removing ads and other obnoxious
+        Internet junk. Privoxy has a flexible configuration and can be
+        customized to suit individual needs and tastes. It has application
+        for both stand-alone systems and multi-user networks.
+
+        Privoxy is Free Software and licensed under the GNU GPLv2.
+
+        Privoxy is an associated project of Software in the Public
+        Interest (SPI).
+
+        Helping hands and donations are welcome:
+
+        
+          
+            http://www.privoxy.org/faq/general.html#PARTICIPATE
+          
+
+          
+            http://www.privoxy.org/faq/general.html#DONATE
+          
+        
+
+        You can find the latest version of the Privoxy User Manual at http://www.privoxy.org/user-manual/. Please see the
+        Contact section on how to contact the
+        developers.
       
+      
     
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-             
-          
-             
-          
-            Next
-          

-             
-          
-             
-          
-            Introduction
-          
+
+    
+      
+        Table of Contents
+
+        1. Introduction
+
+        
+          
+            1.1. Features
+          
+        
+
+        2. Installation
+
+        
+          
+            2.1. Binary
+            Packages
+
+            
+              
+                2.1.1. Red Hat and Fedora
+                RPMs
+
+                2.1.2. Debian and
+                Ubuntu
+
+                2.1.3. Windows
+
+                2.1.4. Solaris
+
+                2.1.5. OS/2
+
+                2.1.6. Mac
+                OS X
+
+                2.1.7. AmigaOS
+
+                2.1.8. FreeBSD
+
+                2.1.9. Gentoo
+              
+            
+
+            2.2. Building
+            from Source
+
+            2.3. Keeping your
+            Installation Up-to-Date
+          
+        
+
+        3. What's New in this Release
+
+        
+          
+            3.1. Note to
+            Upgraders
+          
+        
+
+        4. Quickstart to Using Privoxy
+
+        
+          
+            4.1. Quickstart to Ad
+            Blocking
+          
+        
+
+        5. Starting Privoxy
+
+        
+          
+            5.1. Red Hat and
+            Fedora
+
+            5.2. Debian
+
+            5.3. Windows
+
+            5.4. Solaris, NetBSD,
+            FreeBSD, HP-UX and others
+
+            5.5. OS/2
+
+            5.6. Mac OS X
+
+            5.7. AmigaOS
+
+            5.8. Gentoo
+
+            5.9. Command Line
+            Options
+          
+        
+
+        6. Privoxy Configuration
+
+        
+          
+            6.1. Controlling Privoxy
+            with Your Web Browser
+
+            6.2. Configuration
+            Files Overview
+          
+        
+
+        7. The Main Configuration File
+
+        
+          
+            7.1. Local Set-up
+            Documentation
+
+            
+              
+                7.1.1. user-manual
+
+                7.1.2. trust-info-url
+
+                7.1.3. admin-address
+
+                7.1.4. proxy-info-url
+              
+            
+
+            7.2. Configuration and Log
+            File Locations
+
+            
+              
+                7.2.1. confdir
+
+                7.2.2. templdir
+
+                7.2.3. logdir
+
+                7.2.4. actionsfile
+
+                7.2.5. filterfile
+
+                7.2.6. logfile
+
+                7.2.7. trustfile
+              
+            
+
+            7.3. Debugging
+
+            
+              
+                7.3.1. debug
+
+                7.3.2. single-threaded
+
+                7.3.3. hostname
+              
+            
+
+            7.4. Access Control and
+            Security
+
+            
+              
+                7.4.1. listen-address
+
+                7.4.2. toggle
+
+                7.4.3. enable-remote-toggle
+
+                7.4.4. enable-remote-http-toggle
+
+                7.4.5. enable-edit-actions
+
+                7.4.6. enforce-blocks
+
+                7.4.7. ACLs: permit-access and
+                deny-access
+
+                7.4.8. buffer-limit
+              
+            
+
+            7.5. Forwarding
+
+            
+              
+                7.5.1. forward
+
+                7.5.2. forward-socks4,
+                forward-socks4a and forward-socks5
+
+                7.5.3. Advanced
+                Forwarding Examples
+
+                7.5.4. forwarded-connect-retries
+              
+            
+
+            7.6. Miscellaneous
+
+            
+              
+                7.6.1. accept-intercepted-requests
+
+                7.6.2. allow-cgi-request-crunching
+
+                7.6.3. split-large-forms
+
+                7.6.4. keep-alive-timeout
+
+                7.6.5. default-server-timeout
+
+                7.6.6. connection-sharing
+
+                7.6.7. socket-timeout
+
+                7.6.8. max-client-connections
+
+                7.6.9. handle-as-empty-doc-returns-ok
+
+                7.6.10. enable-compression
+
+                7.6.11. compression-level
+              
+            
+
+            7.7. Windows GUI
+            Options
+          
+        
+
+        8. Actions Files
+
+        
+          
+            8.1. Finding the Right
+            Mix
+
+            8.2. How to Edit
+
+            8.3. How Actions
+            are Applied to Requests
+
+            8.4. Patterns
+
+            
+              
+                8.4.1. The Domain
+                Pattern
+
+                8.4.2. The Path
+                Pattern
+
+                8.4.3. The Tag
+                Pattern
+              
+            
+
+            8.5. Actions
+
+            
+              
+                8.5.1. add-header
+
+                8.5.2. block
+
+                8.5.3. change-x-forwarded-for
+
+                8.5.4. client-header-filter
+
+                8.5.5. client-header-tagger
+
+                8.5.6. content-type-overwrite
+
+                8.5.7. crunch-client-header
+
+                8.5.8. crunch-if-none-match
+
+                8.5.9. crunch-incoming-cookies
+
+                8.5.10. crunch-server-header
+
+                8.5.11. crunch-outgoing-cookies
+
+                8.5.12. deanimate-gifs
+
+                8.5.13. downgrade-http-version
+
+                8.5.14. fast-redirects
+
+                8.5.15. filter
+
+                8.5.16. force-text-mode
+
+                8.5.17. forward-override
+
+                8.5.18. handle-as-empty-document
+
+                8.5.19. handle-as-image
+
+                8.5.20. hide-accept-language
+
+                8.5.21. hide-content-disposition
+
+                8.5.22. hide-if-modified-since
+
+                8.5.23. hide-from-header
+
+                8.5.24. hide-referrer
+
+                8.5.25. hide-user-agent
+
+                8.5.26. limit-connect
+
+                8.5.27. prevent-compression
+
+                8.5.28. overwrite-last-modified
+
+                8.5.29. redirect
+
+                8.5.30. server-header-filter
+
+                8.5.31. server-header-tagger
+
+                8.5.32. session-cookies-only
+
+                8.5.33. set-image-blocker
+
+                8.5.34. Summary
+              
+            
+
+            8.6. Aliases
+
+            8.7. Actions Files
+            Tutorial
+
+            
+              
+                8.7.1. match-all.action
+
+                8.7.2. default.action
+
+                8.7.3. user.action
+              
+            
+          
+        
+
+        9. Filter Files
+
+        
+          
+            9.1. Filter File
+            Tutorial
+
+            9.2. The
+            Pre-defined Filters
+          
+        
+
+        10. Privoxy's Template Files
+
+        11. Contacting the Developers, Bug
+        Reporting and Feature Requests
+
+        
+          
+            11.1. Get
+            Support
+
+            11.2. Reporting
+            Problems
+
+            
+              
+                11.2.1. Reporting Ads
+                or Other Configuration Problems
+
+                11.2.2. Reporting
+                Bugs
+              
+            
+
+            11.3. Request New
+            Features
+
+            11.4. Mailing
+            Lists
+          
+        
+
+        12. Privoxy Copyright, License and
+        History
+
+        
+          
+            12.1. License
+
+            12.2. History
+
+            12.3. Authors
+          
+        
+
+        13. See Also
+
+        14. Appendix
+
+        
+          
+            14.1. Regular
+            Expressions
+
+            14.2. Privoxy's Internal
+            Pages
+
+            
+              
+                14.2.1. Bookmarklets
+              
+            
+
+            14.3. Chain of Events
+
+            14.4. Troubleshooting:
+            Anatomy of an Action
+          
+        
+      
     
-  
-
+  
+
+  
+    
+
+    
+      
+        
 
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+        Next
    Introduction
+  
+
+
diff --git a/doc/webserver/user-manual/installation.html b/doc/webserver/user-manual/installation.html
index b57ae844..a8c75bc9 100644
--- a/doc/webserver/user-manual/installation.html
+++ b/doc/webserver/user-manual/installation.html
@@ -1,419 +1,368 @@
-
+
+
 
-  
-    
-    
-      Installation
-    
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  table.c4 {background-color: #E0E0E0}
+  tt.c3 {font-style: italic}
+  span.c2 {font-style: italic}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    

-            Privoxy 3.0.18 User Manual
-          
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy 3.0.18 User Manual
Prev Next
+    
+  
+
+  
+    2.
+    Installation
+
+    Privoxy is available both in
+    convenient pre-compiled packages for a wide range of operating systems,
+    and as raw source code. For most users, we recommend using the packages,
+    which can be downloaded from our Privoxy Project
+    Page.
+
+    Note: On some platforms, the installer may remove previously installed
+    versions, if found. (See below for your platform). In any case
+    be sure to backup your old
+    configuration if it is valuable to you. See the note to upgraders section below.
+
+    
+      2.1. Binary Packages
+
+      How to install the binary packages depends on your operating
+      system:
+
+      
+        2.1.1. Red Hat and Fedora RPMs
+
+        RPMs can be installed with rpm -Uvh
+        privoxy-3.0.18-1.rpm, and will use /etc/privoxy for the location of configuration
+        files.
+
+        Note that on Red Hat, Privoxy
+        will not be automatically
+        started on system boot. You will need to enable that using chkconfig, ntsysv, or similar
+        methods.
+
+        If you have problems with failed dependencies, try rebuilding the
+        SRC RPM: rpm --rebuild
+        privoxy-3.0.18-1.src.rpm. This will use your locally installed
+        libraries and RPM version.
+
+        Also note that if you have a Junkbuster RPM installed on your system, you
+        need to remove it first, because the packages conflict. Otherwise,
+        RPM will try to remove Junkbuster
+        automatically if found, before installing Privoxy.
+      
+
+      
+        2.1.2. Debian and Ubuntu
+
+        DEBs can be installed with apt-get install
+        privoxy, and will use /etc/privoxy for
+        the location of configuration files.
+      
+
+      
+        2.1.3. Windows
+
+        Just double-click the installer, which will guide you through the
+        installation process. You will find the configuration files in the
+        same directory as you installed Privoxy in.
+
+        Version 3.0.5 beta introduced full Windows service functionality. On Windows only,
+        the Privoxy program has two new
+        command line arguments to install and uninstall Privoxy as a service.
+
+        
+          
+            Arguments:
+
+            
+              --install[:service_name]
+
+              --uninstall[:service_name]
+            
+          
+        
+
+        After invoking Privoxy with
+        --install, you will need to bring up the
+        Windows service console to assign
+        the user you want Privoxy to run
+        under, and whether or not you want it to run whenever the system
+        starts. You can start the Windows
+        services console with the following command: services.msc. If you do not take the manual step of
+        modifying Privoxy's service
+        settings, it will not start. Note too that you will need to give
+        Privoxy a user account that actually exists, or it will not be
+        permitted to write to its log and configuration files.
+      
+
+      
+        2.1.4. Solaris
+
+        Create a new directory, cd to it, then
+        unzip and untar the archive. For the most part, you'll have to figure
+        out where things go.
+      
+
+      
+        2.1.5. OS/2
+
+        First, make sure that no previous installations of Junkbuster and / or Privoxy are left on your system. Check that no
+        Junkbuster or Privoxy objects are in your startup folder.
+
+        Then, just double-click the WarpIN self-installing archive, which
+        will guide you through the installation process. A shadow of the
+        Privoxy executable will be placed in
+        your startup folder so it will start automatically whenever OS/2
+        starts.
+
+        The directory you choose to install Privoxy into will contain all of the
+        configuration files.
+      
+
+      
+        2.1.6. Mac OS X
+
+        Unzip the downloaded file (you can either double-click on the zip
+        file icon from the Finder, or from the desktop if you downloaded it
+        there). Then, double-click on the package installer icon and follow
+        the installation process.
+
+        The privoxy service will automatically start after a successful
+        installation (in addition to every time your computer starts up). To
+        prevent the privoxy service from automatically starting when your
+        computer starts up, remove or rename the folder named /Library/StartupItems/Privoxy.
+
+        To manually start or stop the privoxy service, use the Privoxy
+        Utility for Mac OS X. This application controls the privoxy service
+        (e.g. starting and stopping the service as well as uninstalling the
+        software).
+      
+
+      
+        2.1.7. AmigaOS
+
+        Copy and then unpack the lha archive to
+        a suitable location. All necessary files will be installed into
+        Privoxy directory, including all
+        configuration and log files. To uninstall, just remove this
+        directory.
+      
+
+      
+        2.1.8. FreeBSD
+
+        Privoxy is part of FreeBSD's Ports Collection, you can build and
+        install it with cd /usr/ports/www/privoxy; make
+        install clean.
+
+        If you don't use the ports, you can fetch and install the package
+        with pkg_add -r privoxy.
+
+        The port skeleton and the package can also be downloaded from the
+        File Release Page, but there's no reason to use
+        them unless you're interested in the beta releases which are only
+        available there.
+      
+
+      
+        2.1.9. Gentoo
+
+        Gentoo source packages (Ebuilds) for Privoxy are contained in the Gentoo Portage Tree
+        (they are not on the download page, but there is a Gentoo section,
+        where you can see when a new Privoxy
+        Version is added to the Portage Tree).
+
+        Before installing Privoxy under
+        Gentoo just do first emerge --sync to get
+        the latest changes from the Portage tree. With emerge privoxy you install the latest version.
+
+        Configuration files are in /etc/privoxy,
+        the documentation is in /usr/share/doc/privoxy-3.0.18 and the Log directory
+        is in /var/log/privoxy.
+      
+    
+
+    
+      2.2. Building from Source
+
+      The most convenient way to obtain the Privoxy sources is to download the source tarball
+      from our project download page.
+
+      If you like to live on the bleeding edge and are not afraid of using
+      possibly unstable development versions, you can check out the
+      up-to-the-minute version directly from the CVS
+      repository.
+
+      To build Privoxy from source,
+      autoconf, GNU make
+      (gmake), and, of course, a C compiler like gcc are
+      required.
+
+      When building from a source tarball, first unpack the source:
+
+      
-          
-          
-          
         
-            Prev
-          
-          
-            Next
+          
+            + tar xzvf privoxy-3.0.18-stable-src.tar.gz
+ cd privoxy-3.0.18-stable
+
           
         
       
-      
-    
-    
-      
-        2. Installation
-      
-      
-        Privoxy is available both in
-        convenient pre-compiled packages for a wide range of operating
-        systems, and as raw source code. For most users, we recommend using
-        the packages, which can be downloaded from our Privoxy
-        Project Page.
-      
-      
-        Note: On some platforms, the installer may remove previously
-        installed versions, if found. (See below for your platform). In any
-        case be sure to backup
-        your old configuration if it is valuable to you. See the
-        note to upgraders section
-        below.
-      
-      
-        
-          2.1. Binary Packages
-        
-        
-          How to install the binary packages depends on your operating
-          system:
-        
-        
-          
-            2.1.1. Red Hat and Fedora
-            RPMs
-          
-          
-            RPMs can be installed with rpm -Uvh
-            privoxy-3.0.18-1.rpm, and will use /etc/privoxy for the location of configuration
-            files.
-          
-          
-            Note that on Red Hat, Privoxy
-            will not be
-            automatically started on system boot. You will need to enable
-            that using chkconfig, ntsysv, or similar methods.
-          
-          
-            If you have problems with failed dependencies, try rebuilding the
-            SRC RPM: rpm --rebuild
-            privoxy-3.0.18-1.src.rpm. This will use your locally
-            installed libraries and RPM version.
-          
-          
-            Also note that if you have a Junkbuster RPM installed on your system, you
-            need to remove it first, because the packages conflict.
-            Otherwise, RPM will try to remove Junkbuster automatically if found, before
-            installing Privoxy.
-          
-        
-        
-          
-            2.1.2. Debian and Ubuntu
-          
-          
-            DEBs can be installed with apt-get install
-            privoxy, and will use /etc/privoxy
-            for the location of configuration files.
-          
-        
-        
-          
-            2.1.3. Windows
-          
-          
-            Just double-click the installer, which will guide you through the
-            installation process. You will find the configuration files in
-            the same directory as you installed Privoxy in.
-          
-          
-            Version 3.0.5 beta introduced full Windows service functionality. On Windows
-            only, the Privoxy program has
-            two new command line arguments to install and uninstall Privoxy as a service.
-          
-          
-            
-              
-                Arguments:
-              
-              
-                
-                  --install[:service_name]
-                
-                
-                  --uninstall[:service_name]
-                
-              
-            
-          
-          
-            After invoking Privoxy with --install, you will need to bring up the
-            Windows service console to
-            assign the user you want Privoxy
-            to run under, and whether or not you want it to run whenever the
-            system starts. You can start the Windows services console with the following
-            command: services.msc. If you do not take
-            the manual step of modifying Privoxy's service settings, it will not
-            start. Note too that you will need to give Privoxy a user account
-            that actually exists, or it will not be permitted to write to its
-            log and configuration files.
-          
-        
-        
-          
-            2.1.4. Solaris
-          
-          
-            Create a new directory, cd to it, then
-            unzip and untar the archive. For the most part, you'll have to
-            figure out where things go.
-          
-        
-        
-          
-            2.1.5. OS/2
-          
-          
-            First, make sure that no previous installations of Junkbuster and / or Privoxy are left on your system. Check that
-            no Junkbuster or Privoxy objects are in your startup
-            folder.
-          
-          
-            Then, just double-click the WarpIN self-installing archive, which
-            will guide you through the installation process. A shadow of the
-            Privoxy executable will be
-            placed in your startup folder so it will start automatically
-            whenever OS/2 starts.
-          
-          
-            The directory you choose to install Privoxy into will contain all of the
-            configuration files.
-          
-        
-        
-          
-            2.1.6. Mac OS X
-          
-          
-            Unzip the downloaded file (you can either double-click on the zip
-            file icon from the Finder, or from the desktop if you downloaded
-            it there). Then, double-click on the package installer icon and
-            follow the installation process.
-          
-          
-            The privoxy service will automatically start after a successful
-            installation (in addition to every time your computer starts up).
-            To prevent the privoxy service from automatically starting when
-            your computer starts up, remove or rename the folder named /Library/StartupItems/Privoxy.
-          
-          
-            To manually start or stop the privoxy service, use the Privoxy
-            Utility for Mac OS X. This application controls the privoxy
-            service (e.g. starting and stopping the service as well as
-            uninstalling the software).
-          
-        
-        
-          
-            2.1.7. AmigaOS
-          
-          
-            Copy and then unpack the lha archive to
-            a suitable location. All necessary files will be installed into
-            Privoxy directory, including all
-            configuration and log files. To uninstall, just remove this
-            directory.
-          
-        
-        
-          
-            2.1.8. FreeBSD
-          
-          
-            Privoxy is part of FreeBSD's Ports Collection, you can build and
-            install it with cd /usr/ports/www/privoxy;
-            make install clean.
-          
-          
-            If you don't use the ports, you can fetch and install the package
-            with pkg_add -r privoxy.
-          
-          
-            The port skeleton and the package can also be downloaded from the
-            File Release Page, but there's no reason to use
-            them unless you're interested in the beta releases which are only
-            available there.
-          
-        
-        
-          
-            2.1.9. Gentoo
-          
-          
-            Gentoo source packages (Ebuilds) for Privoxy are contained in the Gentoo Portage
-            Tree (they are not on the download page, but there is a Gentoo
-            section, where you can see when a new Privoxy Version is added to the Portage
-            Tree).
-          
-          
-            Before installing Privoxy under
-            Gentoo just do first emerge --sync to
-            get the latest changes from the Portage tree. With emerge privoxy you install the latest version.
-          
-          
-            Configuration files are in /etc/privoxy, the documentation is in /usr/share/doc/privoxy-3.0.18 and the Log
-            directory is in /var/log/privoxy.
-          
-        
-      
-      
-        
-          2.2. Building from Source
-        
-        
-          The most convenient way to obtain the Privoxy sources is to download the source
-          tarball from our project download page.
-        
-        
-          If you like to live on the bleeding edge and are not afraid of
-          using possibly unstable development versions, you can check out the
-          up-to-the-minute version directly from the CVS
-          repository.
-        
-        
-          To build Privoxy from source, autoconf, GNU make
-          (gmake), and, of course, a C compiler like gcc
-          are required.
-        
-        
-          When building from a source tarball, first unpack the source:
-        
-        
-        
-        
-          
-            
-          
-        
-- tar xzvf privoxy-3.0.18-beta-src.tar.gz
- cd privoxy-3.0.18-beta
-
-            
-
-        
-          For retrieving the current CVS sources, you'll need a CVS client
-          installed. Note that sources from CVS are typically development
-          quality, and may not be stable, or well tested. To download CVS
-          source, check the Sourceforge documentation, which might give
-          commands like:
-        
-        
-        
-        
-          
-            
+    
-+
+      For retrieving the current CVS sources, you'll need a CVS client
+      installed. Note that sources from CVS are typically development
+      quality, and may not be stable, or well tested. To download CVS source,
+      check the Sourceforge documentation, which might give commands
+      like:
+
+      
+        
+          
-          
-        
+               cvs -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa login
   cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co current
   cd current
 
-            
-
-        
-          This will create a directory named current/, which will contain the source tree.
-        
-        
-          You can also check out any Privoxy
-          "branch", just exchange the current name with the wanted branch name
-          (Example: v_3_0_branch for the 3.0 cvs tree).
-        
-        
-          It is also strongly recommended to not run Privoxy as root. You should
-          configure/install/run Privoxy as
-          an unprivileged user, preferably by creating a "privoxy" user and group just for this purpose. See
-          your local documentation for the correct command line to do add new
-          users and groups (something like adduser,
-          but the command syntax may vary from platform to platform).
-        
-        
-          /etc/passwd might then look like:
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      This will create a directory named current/, which will contain the source tree.
+
+      You can also check out any Privoxy
+      "branch", just exchange the current name with the wanted branch name (Example:
+      v_3_0_branch for the 3.0 cvs tree).
+
+      It is also strongly recommended to not run Privoxy as root. You should configure/install/run
+      Privoxy as an unprivileged user,
+      preferably by creating a "privoxy" user and
+      group just for this purpose. See your local documentation for the
+      correct command line to do add new users and groups (something like
+      adduser, but the command syntax may vary from
+      platform to platform).
+
+      /etc/passwd might then look like:
+
+      
+        
+          
-          
-        
+               privoxy:*:7777:7777:privoxy proxy:/no/home:/no/shell
 
-            
-
-        
-          And then /etc/group, like:
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      And then /etc/group, like:
+
+      
+        
+          
-          
-        
+               privoxy:*:7777:
 
-            
-
-        
-          Some binary packages may do this for you.
-        
-        
-          Then, to build from either unpacked tarball or CVS source:
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      Some binary packages may do this for you.
+
+      Then, to build from either unpacked tarball or CVS source:
+
+      
+        
+          
-          
-        
+              autoheader
  autoconf
  ./configure      # (--help to see options)
@@ -422,225 +371,193 @@ Transitional//EN""http://www.w3.org/TR/html4/loose.dtd">
  make -n install  # (to see where all the files will go)
  make -s install  # (to really install, -s to silence output)
 
-            
-
-        
-          Using GNU make, you can have the first four
-          steps automatically done for you by just typing:
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      Using GNU make, you can have the first four
+      steps automatically done for you by just typing:
+
+      
+        
+          
-          
-        
+               make
 
-            
-
-        
-          in the freshly downloaded or unpacked source directory.
-        
-        
-          To build an executable with security enhanced features so that
-          users cannot easily bypass the proxy (e.g. "Go
-          There Anyway"), or alter their own configurations, configure like this:
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+
+      in the freshly downloaded or unpacked source directory.
+
+      To build an executable with security enhanced features so that users
+      cannot easily bypass the proxy (e.g. "Go There
+      Anyway"), or alter their own configurations, configure like this:
+
+      
+        
+          
-          
-        
+              ./configure  --disable-toggle  --disable-editor  --disable-force
 
-            
-
-        
-          Then build as above. In Privoxy 3.0.7 and later, all of these
-          options can also be disabled through the configuration file.
-        
-        
-          WARNING: If
-          installing as root, the install will fail unless a non-root user or
-          group is specified, or a privoxy user and
-          group already exist on the system. If a non-root user is specified,
-          and no group, then the installation will try to also use a group of
-          the same name as "user". If a group is
-          specified (and no user), then the support files will be installed
-          as writable by that group, and owned by the user running the
-          installation.
-        
-        
-          configure accepts --with-user and --with-group options for setting user and group
-          ownership of the configuration files (which need to be writable by
-          the daemon). The specified user must already exist. When starting Privoxy, it must be run as this same
-          user to insure write access to configuration and log files!
-        
-        
-          Alternately, you can specify user and group on the make
-          command line, but be sure both already exist:
-        
-        
-        
-        
-          
-            
-          
-        
-- make -s install  USER=privoxy GROUP=privoxy
-
-            
-
-        
-          The default installation path for make
-          install is /usr/local. This may of
-          course be customized with the various ./configure path options. If you are doing an install
-          to anywhere besides /usr/local, be sure
-          to set the appropriate paths with the correct configure options (./configure --help). Non-privileged users must
-          of course have write access permissions to wherever the target
-          installation is going.
-        
-        
-          If you do install to /usr/local, the
-          install will use sysconfdir=$prefix/etc/privoxy by default. All other
-          destinations, and the direct usage of --sysconfdir flag behave like normal, i.e. will not
-          add the extra privoxy directory. This is
-          for a safer install, as there may already exist another program
-          that uses a file with the "config" name,
-          and thus makes /usr/local/etc cleaner.
-        
-        
-          If installing to /usr/local, the
-          documentation will go by default to $prefix/share/doc. But if this directory doesn't
-          exist, it will then try $prefix/doc and
-          install there before creating a new $prefix/share/doc just for Privoxy.
-        
-        
-          Again, if the installs goes to /usr/local, the localstatedir (ie: var/)
-          will default to /var instead of $prefix/var so the logs will go to /var/log/privoxy/, and the pid file will be created
-          in /var/run/privoxy.pid.
-        
-        
-          make install will attempt to set the correct
-          values in config (main configuration
-          file). You should check this to make sure all values are correct.
-          If appropriate, an init script will be installed, but it is up to
-          the user to determine how and where to start Privoxy. The init script should be checked for
-          correct paths and values, if anything other than a default install
-          is done.
-        
-        
-          If install finds previous versions of local configuration files,
-          most of these will not be overwritten, and the new ones will be
-          installed with a "new" extension.
-          default.action and default.filter will be overwritten. You will then need to
-          manually update the other installed configuration files as needed.
-          The default template files will be overwritten. If you have customized,
-          local templates, these should be stored safely in a separate
-          directory and defined in config by the
-          "templdir" directive. It is of course
-          wise to always back-up any important configuration files "just in case". If a previous version of Privoxy is already running, you will
-          have to restart it manually.
-        
-        
-          For more detailed instructions on how to build Redhat RPMs, Windows
-          self-extracting installers, building on platforms with special
-          requirements etc, please consult the developer manual.
-        
-      
-      
-        
-          2.3. Keeping your Installation
-          Up-to-Date
-        
-        
-          As user feedback comes in and development continues, we will make
-          updated versions of both the main actions file (as a separate package) and the software itself
-          (including the actions file) available for download.
-        
-        
-          If you wish to receive an email notification whenever we release
-          updates of Privoxy or the actions
-          file, subscribe to our announce mailing list,
-          ijbswa-announce@lists.sourceforge.net.
-        
-        
-          In order not to lose your personal changes and adjustments when
-          updating to the latest default.action file
-          we strongly
-          recommend that you use user.action and user.filter
-          for your local customizations of Privoxy. See the Chapter on actions files for details.
-        
-      
-    
-    
-      
-      
-        
-          
-          
-          
+      
-            Prev
-          
-            Home
-          
-            Next
           
         
+
+      Then build as above. In Privoxy 3.0.7 and later, all of these
+      options can also be disabled through the configuration file.
+
+      WARNING: If installing as
+      root, the install will fail unless a non-root user or group is
+      specified, or a privoxy user and group already
+      exist on the system. If a non-root user is specified, and no group,
+      then the installation will try to also use a group of the same name as
+      "user". If a group is specified (and no
+      user), then the support files will be installed as writable by that
+      group, and owned by the user running the installation.
+
+      configure accepts --with-user and --with-group
+      options for setting user and group ownership of the configuration files
+      (which need to be writable by the daemon). The specified user must already exist. When starting
+      Privoxy, it must be run as this same
+      user to insure write access to configuration and log files!
+
+      Alternately, you can specify user and
+      group on the make
+      command line, but be sure both already exist:
+
+      
-          
-          
-          
         
-            Introduction
-          
-             
-          
-            What's New in this Release
+          
+            + make -s install  USER=privoxy GROUP=privoxy
+
           
         
       
+
+      The default installation path for make
+      install is /usr/local. This may of course
+      be customized with the various ./configure path
+      options. If you are doing an install to anywhere besides /usr/local, be sure to set the appropriate paths with
+      the correct configure options (./configure
+      --help). Non-privileged users must of course have write access
+      permissions to wherever the target installation is going.
+
+      If you do install to /usr/local, the
+      install will use sysconfdir=$prefix/etc/privoxy by default. All other
+      destinations, and the direct usage of --sysconfdir flag behave like normal, i.e. will not add
+      the extra privoxy directory. This is for a
+      safer install, as there may already exist another program that uses a
+      file with the "config" name, and thus makes
+      /usr/local/etc cleaner.
+
+      If installing to /usr/local, the
+      documentation will go by default to $prefix/share/doc. But if this directory doesn't exist,
+      it will then try $prefix/doc and install
+      there before creating a new $prefix/share/doc
+      just for Privoxy.
+
+      Again, if the installs goes to /usr/local,
+      the localstatedir (ie: var/) will default to /var
+      instead of $prefix/var so the logs will go to
+      /var/log/privoxy/, and the pid file will be
+      created in /var/run/privoxy.pid.
+
+      make install will attempt to set the correct
+      values in config (main configuration file).
+      You should check this to make sure all values are correct. If
+      appropriate, an init script will be installed, but it is up to the user
+      to determine how and where to start Privoxy. The init script should be checked for
+      correct paths and values, if anything other than a default install is
+      done.
+
+      If install finds previous versions of local configuration files,
+      most of these will not be overwritten, and the new ones will be
+      installed with a "new" extension.
+      default.action and default.filter will be overwritten. You will then need
+      to manually update the other installed configuration files as needed.
+      The default template files will be overwritten. If you have
+      customized, local templates, these should be stored safely in a
+      separate directory and defined in config by
+      the "templdir" directive. It is of course
+      wise to always back-up any important configuration files "just in case". If a previous version of Privoxy is already running, you will have to
+      restart it manually.
+
+      For more detailed instructions on how to build Redhat RPMs, Windows
+      self-extracting installers, building on platforms with special
+      requirements etc, please consult the developer manual.
     
-  
-
 
+    
+      2.3. Keeping your Installation
+      Up-to-Date
+
+      As user feedback comes in and development continues, we will make
+      updated versions of both the main actions
+      file (as a separate package) and the software itself (including
+      the actions file) available for download.
+
+      If you wish to receive an email notification whenever we release
+      updates of Privoxy or the actions
+      file, subscribe to our announce mailing list,
+      ijbswa-announce@lists.sourceforge.net.
+
+      In order not to lose your personal changes and adjustments when
+      updating to the latest default.action file we
+      strongly recommend that you
+      use user.action and user.filter for your local customizations of
+      Privoxy. See the Chapter on actions files for details.
+    
+  
+
+  
+    
+
+    
+      
+        
+
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Introduction   What's New in this
+        Release
+  
+
+
diff --git a/doc/webserver/user-manual/introduction.html b/doc/webserver/user-manual/introduction.html
index eb4d9587..d66b17a9 100644
--- a/doc/webserver/user-manual/introduction.html
+++ b/doc/webserver/user-manual/introduction.html
@@ -1,215 +1,182 @@
-
+
+
 
-  
-    
-    
-      Introduction
-    
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
-        
-          
-          
-          
-        
-      
-            Privoxy 3.0.18 User Manual
-          

-            Prev
-          
-          
-            Next
-          
-      
-    
-    
-      
-        1. Introduction
-      
-      
-        This documentation is included with the current UNRELEASED version of
-        Privoxy, v.3.0.18, and is mostly
-        complete at this point. The most up to date reference for the time
-        being is still the comments in the source files and in the individual
-        configuration files. Development of a new version is currently
-        nearing completion, and includes significant changes and enhancements
-        over earlier versions.
-      
-      
-        Since this is a UNRELEASED version, not all new features are well
-        tested. This documentation may be slightly out of sync as a result
-        (especially with CVS sources). And there may be bugs, though hopefully not many!
-      
-      
-        
-          1.1. Features
-        
-        
-          In addition to the core features of ad blocking and cookie management, Privoxy provides many supplemental features,
-          some of them currently under development, that give the end-user
-          more control, more privacy and more freedom:
-        
-        
-        
-        
-          
-            
-              Supports "Connection: keep-alive". Outgoing connections can be
-              kept alive independently from the client.
-            
-          
-          
-            
-              Supports IPv6, provided the operating system does so too, and
-              the configure script detects it.
-            
-          
-          
-            
-              Supports tagging which allows to change the behaviour based on
-              client and server headers.
-            
-          
-          
-            
-              Can be run as an "intercepting" proxy, which obviates the need
-              to configure browsers individually.
-            
-          
-          
-            
-              Sophisticated actions and filters for manipulating both server
-              and client headers.
-            
-          
-          
-            
-              Can be chained with other proxies.
-            
-          
-          
-            
-              Integrated browser-based configuration and control utility at
-              http://config.privoxy.org/ (shortcut: http://p.p/). Browser-based
-              tracing of rule and filter effects. Remote toggling.
-            
-          
-          
-            
-              Web page filtering (text replacements, removes banners based on
-              size, invisible "web-bugs" and HTML
-              annoyances, etc.)
-            
-          
-          
-            
-              Modularized configuration that allows for standard settings and
-              user settings to reside in separate files, so that installing
-              updated actions files won't overwrite individual user settings.
-            
-          
-          
-            
-              Support for Perl Compatible Regular Expressions in the
-              configuration files, and a more sophisticated and flexible
-              configuration syntax.
-            
-          
-          
-            
-              GIF de-animation.
-            
-          
-          
-            
-              Bypass many click-tracking scripts (avoids script redirection).
-            
-          
-          
-            
-              User-customizable HTML templates for most proxy-generated pages
-              (e.g. "blocked" page).
-            
-          
-          
-            
-              Auto-detection and re-reading of config file changes.
-            
-          
-          
-            
-              Most features are controllable on a per-site or per-location
-              basis.
-            
-          
-          
-            
-              Many smaller new features added, limitations and bugs removed.
-            
-          
-        
-      
-    
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-            Prev
-          
-            Home
-          
-            Next
-          

-            Privoxy 3.0.18 User Manual
-          
-             
-          
-            Installation
-          
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy 3.0.18 User Manual
Prev Next
+    
+  
+
+  
+    1.
+    Introduction
+
+    This documentation is included with the current stable version of
+    Privoxy, v.3.0.18.
+
+    
+      1.1.
+      Features
+
+      In addition to the core features of ad blocking and cookie
+      management, Privoxy provides many
+      supplemental features, that give the end-user more control, more
+      privacy and more freedom:
+
+      
+        
+          Supports "Connection: keep-alive". Outgoing connections can be
+          kept alive independently from the client.
+        
+
+        
+          Supports IPv6, provided the operating system does so too, and
+          the configure script detects it.
+        
+
+        
+          Supports tagging which allows to change the behaviour based on
+          client and server headers.
+        
+
+        
+          Can be run as an "intercepting" proxy, which obviates the need
+          to configure browsers individually.
+        
+
+        
+          Sophisticated actions and filters for manipulating both server
+          and client headers.
+        
+
+        
+          Can be chained with other proxies.
+        
+
+        
+          Integrated browser-based configuration and control utility at
+          http://config.privoxy.org/ (shortcut: http://p.p/). Browser-based tracing
+          of rule and filter effects. Remote toggling.
+        
+
+        
+          Web page filtering (text replacements, removes banners based on
+          size, invisible "web-bugs" and HTML
+          annoyances, etc.)
+        
+
+        
+          Modularized configuration that allows for standard settings and
+          user settings to reside in separate files, so that installing
+          updated actions files won't overwrite individual user settings.
+        
+
+        
+          Support for Perl Compatible Regular Expressions in the
+          configuration files, and a more sophisticated and flexible
+          configuration syntax.
+        
+
+        
+          GIF de-animation.
+        
+
+        
+          Bypass many click-tracking scripts (avoids script
+          redirection).
+        
+
+        
+          User-customizable HTML templates for most proxy-generated pages
+          (e.g. "blocked" page).
+        
+
+        
+          Auto-detection and re-reading of config file changes.
+        
+
+        
+          Most features are controllable on a per-site or per-location
+          basis.
+        
+
+        
+          Many smaller new features added, limitations and bugs
+          removed.
+        
+      
     
-  
-
+  
+
+  
+    
+
+    
+      
+        
+
+        
 
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Privoxy 3.0.18 User
+        Manual   Installation
+  
+
+
diff --git a/doc/webserver/user-manual/quickstart.html b/doc/webserver/user-manual/quickstart.html
index c17cca06..2991107e 100644
--- a/doc/webserver/user-manual/quickstart.html
+++ b/doc/webserver/user-manual/quickstart.html
@@ -1,516 +1,451 @@
-
+
+
 
-  
-    
-    
-      Quickstart to Using Privoxy
-    
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
-        
-          
-          
-          
-        
-      
-            Privoxy 3.0.18 User Manual
-          

-            Prev
-          
-          
-            Next
-          
-      
-    
-    
-      
-        4. Quickstart to Using Privoxy
-      
-      
-      
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  p.c3 {font-weight: bold}
+  span.c2 {font-style: italic}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy 3.0.18 User Manual
Prev Next
+    
+  
+
+  
+    4. Quickstart to
+    Using Privoxy
+
+    
+      
+        Install Privoxy. See the Installation Section below for platform
+        specific information.
+      
+
+      
+        Advanced users and those who want to offer Privoxy service to more than just their local
+        machine should check the main config file,
+        especially the security-relevant options. These are
+        off by default.
+      
+
+      
+        Start Privoxy, if the
+        installation program has not done this already (may vary according to
+        platform). See the section Starting
+        Privoxy.
+      
+
+      
+        Set your browser to use Privoxy
+        as HTTP and HTTPS (SSL) proxy
+        by setting the proxy configuration for address of 127.0.0.1 and port 8118.
+        DO NOT activate proxying
+        for FTP or any protocols besides HTTP and
+        HTTPS (SSL) unless you intend to prevent your browser from using
+        these protocols.
+      
+
+      
+        Flush your browser's disk and memory caches, to remove any cached
+        ad images. If using Privoxy to
+        manage cookies, you should remove any currently stored cookies
+        too.
+      
+
+      
+        A default installation should provide a reasonable starting point
+        for most. There will undoubtedly be occasions where you will want to
+        adjust the configuration, but that can be dealt with as the need
+        arises. Little to no initial configuration is required in most cases,
+        you may want to enable the web-based action editor though. Be sure to read the
+        warnings first.
+
+        See the Configuration section for
+        more configuration options, and how to customize your installation.
+        You might also want to look at the next section for a quick
+        introduction to how Privoxy blocks
+        ads and banners.
+      
+
+      
+        If you experience ads that slip through, innocent images that are
+        blocked, or otherwise feel the need to fine-tune Privoxy's behavior, take a look at the actions files. As a quick start, you might
+        find the richly commented
+        examples helpful. You can also view and edit the actions files
+        through the web-based user interface. The Appendix "Troubleshooting: Anatomy
+        of an Action" has hints on how to understand and debug
+        actions that "misbehave".
+      
+
+      
+        Please see the section Contacting the
+        Developers on how to report bugs, problems with websites or to
+        get help.
+      
+
+      
+        Now enjoy surfing with enhanced control, comfort and privacy!
+      
+    
+
+    
+      4.1. Quickstart to Ad Blocking
+
+      Ad blocking is but one of Privoxy's
+      array of features. Many of these features are for the technically
+      minded advanced user. But, ad and banner blocking is surely common
+      ground for everybody.
+
+      This section will provide a quick summary of ad blocking so you can
+      get up to speed quickly without having to read the more extensive
+      information provided below, though this is highly recommended.
+
+      First a bit of a warning ... blocking ads is much like blocking
+      SPAM: the more aggressive you are about it, the more likely you are to
+      block things that were not intended. And the more likely that some
+      things may not work as intended. So there is a trade off here. If you
+      want extreme ad free browsing, be prepared to deal with more
+      "problem" sites, and to spend more time
+      adjusting the configuration to solve these unintended consequences. In
+      short, there is not an easy way to eliminate all ads. Either take the easy way and
+      settle for most ads blocked
+      with the default configuration, or jump in and tweak it for your
+      personal surfing habits and preferences.
+
+      Secondly, a brief explanation of Privoxy's "actions".
+      "Actions" in this context, are the
+      directives we use to tell Privoxy to
+      perform some task relating to HTTP transactions (i.e. web browsing). We
+      tell Privoxy to take some "action". Each action has a unique name and function.
+      While there are many potential actions
+      in Privoxy's arsenal, only a few are
+      used for ad blocking. Actions,
+      and action configuration files, are
+      explained in depth below.
+
+      Actions are specified in Privoxy's
+      configuration, followed by one or more URLs to which the action should
+      apply. URLs can actually be URL type patterns that use wildcards so they
+      can apply potentially to a range of similar URLs. The actions, together
+      with the URL patterns are called a section.
+
+      When you connect to a website, the full URL will either match one or
+      more of the sections as defined in Privoxy's configuration, or not. If so, then
+      Privoxy will perform the respective
+      actions. If not, then nothing special happens. Furthermore, web pages
+      may contain embedded, secondary URLs that your web browser will use to
+      load additional components of the page, as it parses the original
+      page's HTML content. An ad image for instance, is just an URL embedded
+      in the page somewhere. The image itself may be on the same server, or a
+      server somewhere else on the Internet. Complex web pages will have many
+      such embedded URLs. Privoxy can deal
+      with each URL individually, so, for instance, the main page text is not
+      touched, but images from such-and-such server are blocked.
+
+      The most important actions for basic ad blocking are: block, handle-as-image,
+      handle-as-empty-document,and
+      set-image-blocker:
+
       
         
-          
-            Install Privoxy. See the Installation Section below for
-            platform specific information.
-          
+          block - this is perhaps the
+          single most used action, and is particularly important for ad
+          blocking. This action stops any contact between your browser and
+          any URL patterns that match this action's configuration. It can be
+          used for blocking ads, but also anything that is determined to be
+          unwanted. By itself, it simply stops any communication with the
+          remote server and sends Privoxy's
+          own built-in BLOCKED page instead to let you now what has happened
+          (with some exceptions, see below).
         
+
         
-          
-            Advanced users and those who want to offer Privoxy service to more than just their
-            local machine should check the main config
-            file, especially the security-relevant options. These
-            are off by default.
-          
+          handle-as-image -
+          tells Privoxy to treat this URL as
+          an image. Privoxy's default
+          configuration already does this for all common image types (e.g.
+          GIF), but there are many situations where this is not so easy to
+          determine. So we'll force it in these cases. This is particularly
+          important for ad blocking, since only if we know that it's an image
+          of some kind, can we replace it with an image of our choosing,
+          instead of the Privoxy BLOCKED
+          page (which would only result in a "broken
+          image" icon). There are some limitations to this though. For
+          instance, you can't just brute-force an image substitution for an
+          entire HTML page in most situations.
         
+
         
-          
-            Start Privoxy, if the
-            installation program has not done this already (may vary
-            according to platform). See the section Starting Privoxy.
-          
+          handle-as-empty-document
+          - sends an empty document instead of Privoxy's normal BLOCKED HTML page. This is
+          useful for file types that are neither HTML nor images, such as
+          blocking JavaScript files.
         
+
         
-          
-            Set your browser to use Privoxy
-            as HTTP and HTTPS (SSL) proxy by setting the proxy configuration for address
-            of 127.0.0.1 and port 8118. DO NOT activate proxying for FTP or any protocols besides HTTP and HTTPS (SSL)
-            unless you intend to prevent your browser from using these
-            protocols.
-          
+          set-image-blocker -
+          tells Privoxy what to display in
+          place of an ad image that has hit a block rule. For this to come
+          into play, the URL must match a block action somewhere in the
+          configuration, and, it
+          must also match an handle-as-image
+          action.
+
+          The configuration options on what to display instead of the ad
+          are:
+
+          
+            
+              
+                
+              
+            
+             pattern - a checkerboard
+                pattern, so that an ad replacement is obvious. This is the
+                default.
+
+          
+            
+              
+                
+              
+            
+             blank - A very small empty GIF
+                image is displayed. This is the so-called "invisible" configuration option.
+
+          
+            
+              
+                
+              
+            
+             http://<URL> - A redirect
+                to any image anywhere of the user's choosing (advanced
+                usage).
         
+      
+
+      Advanced users will eventually want to explore Privoxy filters as well. Filters are very
+      different from blocks. A "block" blocks a site, page, or unwanted contented.
+      Filters are a way of filtering or modifying what is actually on the
+      page. An example filter usage: a text replacement of "no-no" for "nasty-word".
+      That is a very simple example. This process can be used for ad
+      blocking, but it is more in the realm of advanced usage and has some
+      pitfalls to be wary off.
+
+      The quickest way to adjust any of these settings is with your
+      browser through the special Privoxy
+      editor at http://config.privoxy.org/show-status (shortcut: http://p.p/show-status). This is an
+      internal page, and does not require Internet access.
+
+      Note that as of Privoxy 3.0.7 beta
+      the action editor is disabled by default. Check the enable-edit-actions
+      section in the configuration file to learn why and in which cases
+      it's safe to enable again.
+
+      If you decided to enable the action editor, select the appropriate
+      "actions" file, and click "Edit". It is best to put
+      personal or local preferences in user.action
+      since this is not meant to be overwritten during upgrades, and will
+      over-ride the settings in other files. Here you can insert new
+      "actions", and URLs for ad blocking or other
+      purposes, and make other adjustments to the configuration. Privoxy will detect these changes
+      automatically.
+
+      A quick and simple step by step example:
+
+      
         
-          
-            Flush your browser's disk and memory caches, to remove any cached
-            ad images. If using Privoxy to
-            manage cookies, you should remove any currently stored
-            cookies too.
-          
+          Right click on the ad image to be blocked, then select
+          "Copy Link
+          Location" from the pop-up menu.
         
+
         
-          
-            A default installation should provide a reasonable starting point
-            for most. There will undoubtedly be occasions where you will want
-            to adjust the configuration, but that can be dealt with as the
-            need arises. Little to no initial configuration is required in
-            most cases, you may want to enable the web-based action
-            editor though. Be sure to read the warnings first.
-          
-          
-            See the Configuration section
-            for more configuration options, and how to customize your
-            installation. You might also want to look at the next section for a
-            quick introduction to how Privoxy blocks ads and banners.
-          
+          Set your browser to http://config.privoxy.org/show-status
         
+
         
-          
-            If you experience ads that slip through, innocent images that are
-            blocked, or otherwise feel the need to fine-tune Privoxy's behavior, take a look at the actions files. As a quick start, you
-            might find the richly
-            commented examples helpful. You can also view and edit the
-            actions files through the web-based user interface. The Appendix "Troubleshooting: Anatomy of an
-            Action" has hints on how to understand and debug
-            actions that "misbehave".
-          
+          Find user.action in the top section,
+          and click on "Edit":
+
+          
+            
+
+            Figure 1. Actions Files in Use
+
+            
+              
+            
+          
         
+
         
-          
-            Please see the section Contacting the
-            Developers on how to report bugs, problems with websites or
-            to get help.
-          
+          You should have a section with only block listed under "Actions:". If not, click a "Insert new section
+          below" button, and in the new section that just
+          appeared, click the Edit button
+          right under the word "Actions:". This
+          will bring up a list of all actions. Find block near the
+          top, and click in the "Enabled" column,
+          then "Submit" just below the list.
         
+
         
-          
-            Now enjoy surfing with enhanced control, comfort and privacy!
-          
+          Now, in the block actions section, click the
+          "Add"
+          button, and paste the URL the browser got from "Copy Link
+          Location". Remove the http:// at the beginning of the URL. Then, click
+          "Submit"
+          (or "OK"
+          if in a pop-up window).
+        
+
+        
+          Now go back to the original page, and press SHIFT-Reload (or flush all browser caches). The image
+          should be gone now.
         
       
 
-      
-        
-          4.1. Quickstart to Ad Blocking
-        
-        
-          Ad blocking is but one of Privoxy's array of features. Many of these
-          features are for the technically minded advanced user. But, ad and
-          banner blocking is surely common ground for everybody.
-        
-        
-          This section will provide a quick summary of ad blocking so you can
-          get up to speed quickly without having to read the more extensive
-          information provided below, though this is highly recommended.
-        
-        
-          First a bit of a warning ... blocking ads is much like blocking
-          SPAM: the more aggressive you are about it, the more likely you are
-          to block things that were not intended. And the more likely that
-          some things may not work as intended. So there is a trade off here.
-          If you want extreme ad free browsing, be prepared to deal with more
-          "problem" sites, and to spend more time
-          adjusting the configuration to solve these unintended consequences.
-          In short, there is not an easy way to eliminate all ads. Either take the
-          easy way and settle for most ads blocked with the default
-          configuration, or jump in and tweak it for your personal surfing
-          habits and preferences.
-        
-        
-          Secondly, a brief explanation of Privoxy's "actions". "Actions" in
-          this context, are the directives we use to tell Privoxy to perform some task relating to HTTP
-          transactions (i.e. web browsing). We tell Privoxy to take some "action". Each action has a unique name and
-          function. While there are many potential actions in Privoxy's arsenal, only a few are used for ad
-          blocking. Actions, and action configuration files, are
-          explained in depth below.
-        
-        
-          Actions are specified in Privoxy's
-          configuration, followed by one or more URLs to which the action
-          should apply. URLs can actually be URL type patterns that use wildcards so
-          they can apply potentially to a range of similar URLs. The actions,
-          together with the URL patterns are called a section.
-        
-        
-          When you connect to a website, the full URL will either match one
-          or more of the sections as defined in Privoxy's configuration, or not. If so, then
-          Privoxy will perform the
-          respective actions. If not, then nothing special happens.
-          Furthermore, web pages may contain embedded, secondary URLs that
-          your web browser will use to load additional components of the
-          page, as it parses the original page's HTML content. An ad image
-          for instance, is just an URL embedded in the page somewhere. The
-          image itself may be on the same server, or a server somewhere else
-          on the Internet. Complex web pages will have many such embedded
-          URLs. Privoxy can deal with each
-          URL individually, so, for instance, the main page text is not
-          touched, but images from such-and-such server are blocked.
-        
-        
-          The most important actions for basic ad blocking are: block, handle-as-image, handle-as-empty-document,and
-          set-image-blocker:
-        
-        
-        
-        
-          
-            
-              block - this is perhaps the
-              single most used action, and is particularly important for ad
-              blocking. This action stops any contact between your browser
-              and any URL patterns that match this action's configuration. It
-              can be used for blocking ads, but also anything that is
-              determined to be unwanted. By itself, it simply stops any
-              communication with the remote server and sends Privoxy's own built-in BLOCKED page
-              instead to let you now what has happened (with some exceptions,
-              see below).
-            
-          
-          
-            
-              handle-as-image -
-              tells Privoxy to treat this
-              URL as an image. Privoxy's
-              default configuration already does this for all common image
-              types (e.g. GIF), but there are many situations where this is
-              not so easy to determine. So we'll force it in these cases.
-              This is particularly important for ad blocking, since only if
-              we know that it's an image of some kind, can we replace it with
-              an image of our choosing, instead of the Privoxy BLOCKED page (which would only
-              result in a "broken image" icon).
-              There are some limitations to this though. For instance, you
-              can't just brute-force an image substitution for an entire HTML
-              page in most situations.
-            
-          
-          
-            
-              handle-as-empty-document
-              - sends an empty document instead of Privoxy's normal BLOCKED HTML page. This
-              is useful for file types that are neither HTML nor images, such
-              as blocking JavaScript files.
-            
-          
-          
-            
-              set-image-blocker
-              - tells Privoxy what to
-              display in place of an ad image that has hit a block rule. For
-              this to come into play, the URL must match a block
-              action somewhere in the configuration, and, it must also
-              match an handle-as-image
-              action.
-            
-            
-              The configuration options on what to display instead of the ad
-              are:
-            
-            
-              
-                
-                  
-                
-              
-            
-                       pattern - a checkerboard pattern,
-                    so that an ad replacement is obvious. This is the
-                    default.
-                  
-            
-              
-                
-                  
-                
-              
-            
-                       blank - A very small empty GIF
-                    image is displayed. This is the so-called "invisible" configuration option.
-                  
-            
-              
-                
-                  
-                
-              
-            
-                       http://<URL> - A redirect to
-                    any image anywhere of the user's choosing (advanced
-                    usage).
-                  
-          
-        
-
-        
-          Advanced users will eventually want to explore Privoxy filters as well. Filters are
-          very different from blocks. A "block" blocks a site, page, or unwanted contented.
-          Filters are a way of filtering or modifying what is actually on the
-          page. An example filter usage: a text replacement of "no-no" for "nasty-word".
-          That is a very simple example. This process can be used for ad
-          blocking, but it is more in the realm of advanced usage and has
-          some pitfalls to be wary off.
-        
-        
-          The quickest way to adjust any of these settings is with your
-          browser through the special Privoxy editor at http://config.privoxy.org/show-status (shortcut: http://p.p/show-status). This
-          is an internal page, and does not require Internet access.
-        
-        
-          Note that as of Privoxy 3.0.7 beta
-          the action editor is disabled by default. Check the enable-edit-actions
-          section in the configuration file to learn why and in which
-          cases it's safe to enable again.
-        
-        
-          If you decided to enable the action editor, select the appropriate
-          "actions" file, and click "Edit". It is best to
-          put personal or local preferences in user.action since this is not meant to be
-          overwritten during upgrades, and will over-ride the settings in
-          other files. Here you can insert new "actions", and URLs for ad blocking or other
-          purposes, and make other adjustments to the configuration. Privoxy will detect these changes
-          automatically.
-        
-        
-          A quick and simple step by step example:
-        
-        
-        
-        
-          
-            
-              Right click on the ad image to be blocked, then select "Copy Link
-              Location" from the pop-up menu.
-            
-          
-          
-            
-              Set your browser to http://config.privoxy.org/show-status
-            
-          
-          
-            
-              Find user.action in the top section,
-              and click on "Edit":
-            
-            
-            
-            
-              
-              
-                Figure 1. Actions Files in Use
-              
-              
-                
-                  
-                
-              
-            
-          
-          
-            
-              You should have a section with only block listed under
-              "Actions:". If not, click a "Insert new section
-              below" button, and in the new section that just
-              appeared, click the Edit button
-              right under the word "Actions:".
-              This will bring up a list of all actions. Find block near
-              the top, and click in the "Enabled"
-              column, then "Submit" just below the list.
-            
-          
-          
-            
-              Now, in the block actions section, click
-              the "Add" button, and paste the URL the
-              browser got from "Copy Link Location". Remove the http:// at the beginning of the URL. Then,
-              click "Submit" (or "OK" if in a
-              pop-up window).
-            
-          
-          
-            
-              Now go back to the original page, and press SHIFT-Reload (or flush all browser caches). The
-              image should be gone now.
-            
-          
-        
-
-        
-          This is a very crude and simple example. There might be good
-          reasons to use a wildcard pattern match to include potentially
-          similar images from the same site. For a more extensive explanation
-          of "patterns", and the entire actions
-          concept, see the Actions section.
-        
-        
-          For advanced users who want to hand edit their config files, you
-          might want to now go to the Actions Files Tutorial. The
-          ideas explained therein also apply to the web-based editor.
-        
-        
-          There are also various filters that can be used for ad
-          blocking (filters are a special subset of actions). These fall into
-          the "advanced" usage category, and are
-          explained in depth in later sections.
-        
-      
-    
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-            Prev
-          
-            Home
-          
-            Next
-          

-            What's New in this Release
-          
-             
-          
-            Starting Privoxy
-          
+      This is a very crude and simple example. There might be good reasons
+      to use a wildcard pattern match to include potentially similar images
+      from the same site. For a more extensive explanation of "patterns", and the entire actions concept, see the Actions section.
+
+      For advanced users who want to hand edit their config files, you
+      might want to now go to the Actions Files Tutorial. The ideas
+      explained therein also apply to the web-based editor.
+
+      There are also various filters that can be used for ad blocking
+      (filters are a special subset of actions). These fall into the
+      "advanced" usage category, and are explained
+      in depth in later sections.
     
-  
-
+  
+
+  
+    
+
+    
+      
+        
+
+        
 
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
What's New in this
+        Release   Starting Privoxy
+  
+
+
diff --git a/doc/webserver/user-manual/seealso.html b/doc/webserver/user-manual/seealso.html
index a3ae8571..c6f011da 100644
--- a/doc/webserver/user-manual/seealso.html
+++ b/doc/webserver/user-manual/seealso.html
@@ -1,226 +1,208 @@
-
+
+
 
-  
-    
-    
-      See Also
-    
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    

+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy 3.0.18 User Manual
Prev Next
+    
+  
+
+  
+    13. See Also
+
+    Other references and sites of interest to Privoxy users:
+
+    
+      
-          
+          
+      
+    
         
-            Privoxy 3.0.18 User Manual
-          http://www.privoxy.org/, the Privoxy Home page.
         
+
+    
+      
-          
-          
-          
+          
-      
         
-            Prev
-          
-          
-            Next
-          http://www.privoxy.org/faq/, the Privoxy FAQ.
         
-      
-    
-    
-      
-        13. See Also
-      
-      
-        Other references and sites of interest to Privoxy users:
-      
-      
-      
-      
-        
-          
-            
-          
-        
-      
-              http://www.privoxy.org/, the Privoxy Home page.
-            
-      
-        
-          
-            
-          
-        
-      
-              http://www.privoxy.org/faq/, the Privoxy FAQ.
-            
-      
-        
-          
-            
-          
-        
-      
-              http://www.privoxy.org/developer-manual/, the Privoxy developer manual.
-            
-      
-        
-          
-            
-          
-        
-      
-              https://sourceforge.net/projects/ijbswa/, the
-              Project Page for Privoxy on SourceForge.
-            
-      
-        
-          
-            
-          
-        
-      
-              http://config.privoxy.org/, the web-based user
-              interface. Privoxy must be
-              running for this to work. Shortcut: http://p.p/
-            
-      
-        
-          
-            
-          
-        
-      
-              https://sourceforge.net/tracker/?group_id=11118&atid=460288,
-              to submit "misses" and other
-              configuration related suggestions to the developers.
-            
-      
-        
-          
-            
-          
-        
-      
-              http://www.junkbusters.com/ht/en/cookies.html, an
-              explanation how cookies are used to track web users.
-            
-      
-        
-          
-            
-          
-        
-      
-              http://www.junkbusters.com/ijb.html, the original
-              Internet Junkbuster.
-            
-      
-        
-          
-            
-          
-        
-      
-              http://www.squid-cache.org/, a popular caching
-              proxy, which is often used together with Privoxy.
-            
-      
-        
-          
-            
-          
-        
-      
-              http://www.pps.jussieu.fr/~jch/software/polipo/,
-              Polipo is a caching proxy with
-              advanced features like pipelining, multiplexing and caching of
-              partial instances. In many setups it can be used as Squid replacement.
-            
-      
-        
-          
-            
-          
-        
-      
-              https://www.torproject.org/, Tor can help anonymize web browsing, web
-              publishing, instant messaging, IRC, SSH, and other
-              applications.
-            
-    
-    
-      
-      
+      
+    
+
+    
+      
-          
-          
-          
+          
+      
+    
         
-            Prev
-          
-            Home
-          
-            Next
-          http://www.privoxy.org/developer-manual/, the
+          Privoxy developer manual.
         
+
+    
+      
-          
-          
-          
+          
-      
         
-            Privoxy Copyright, License and History
-          
-             
-          
-            Appendix
-          https://sourceforge.net/projects/ijbswa/, the Project
+          Page for Privoxy on SourceForge.
         
-    
-  
-
+      
+
+    
+      
+        
+          
+        
+      
+    http://config.privoxy.org/, the web-based user
+          interface. Privoxy must be running
+          for this to work. Shortcut: http://p.p/
 
+    
+      
+        
+          
+        
+      
+    https://sourceforge.net/tracker/?group_id=11118&atid=460288,
+          to submit "misses" and other
+          configuration related suggestions to the developers.
+
+    
+      
+        
+          
+        
+      
+    http://www.junkbusters.com/ht/en/cookies.html, an
+          explanation how cookies are used to track web users.
+
+    
+      
+        
+          
+        
+      
+    http://www.junkbusters.com/ijb.html, the original
+          Internet Junkbuster.
+
+    
+      
+        
+          
+        
+      
+    http://www.squid-cache.org/, a popular caching proxy,
+          which is often used together with Privoxy.
+
+    
+      
+        
+          
+        
+      
+    http://www.pps.jussieu.fr/~jch/software/polipo/,
+          Polipo is a caching proxy with
+          advanced features like pipelining, multiplexing and caching of
+          partial instances. In many setups it can be used as Squid replacement.
+
+    
+      
+        
+          
+        
+      
+    https://www.torproject.org/, Tor can help anonymize web browsing, web
+          publishing, instant messaging, IRC, SSH, and other
+          applications.
+  
+
+  
+    
+
+    
+      
+        
+
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Privoxy Copyright, License
+        and History   Appendix
+  
+
+
diff --git a/doc/webserver/user-manual/startup.html b/doc/webserver/user-manual/startup.html
index df6da50a..3e4fa152 100644
--- a/doc/webserver/user-manual/startup.html
+++ b/doc/webserver/user-manual/startup.html
@@ -1,533 +1,458 @@
-
+
+
 
-  
-    
-    
-      Starting Privoxy
-    
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  table.c4 {background-color: #E0E0E0}
+  p.c3 {font-weight: bold}
+  span.c2 {font-style: italic}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    

+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy 3.0.18 User Manual
Prev Next
+    
+  
+
+  
+    5. Starting
+    Privoxy
+
+    Before launching Privoxy for the
+    first time, you will want to configure your browser(s) to use
+    Privoxy as a HTTP and HTTPS (SSL)
+    proxy. The default is 127.0.0.1 (or localhost) for the proxy
+    address, and port 8118 (earlier versions used port 8000). This is the one
+    configuration step that must be
+    done!
+
+    Please note that Privoxy can only
+    proxy HTTP and HTTPS traffic. It will not work with FTP or other
+    protocols.
+
+    
+      
+
+      Figure 2. Proxy Configuration Showing Mozilla/Netscape
+      HTTP and HTTPS (SSL) Settings
+
+      
+        
+      
+    
+
+    With Firefox, this is typically set
+    under:
+
+     Tools -> Options ->  Advanced -> Network ->Connection -> Settings

+
+    Or optionally on some platforms:
+
+     Edit -> Preferences -> General -> Connection Settings -> Manual Proxy Configuration

+
+    With Netscape (and Mozilla), this can be set under:
+
+     Edit -> Preferences -> Advanced -> Proxies -> HTTP
+    Proxy

+
+    For Internet Explorer v.5-7:
+
+     Tools -> Internet
+    Options -> Connections -> LAN Settings
+
+    Then, check "Use Proxy" and fill in the
+    appropriate info (Address: 127.0.0.1, Port: 8118). Include HTTPS (SSL),
+    if you want HTTPS proxy support too (sometimes labeled "Secure"). Make sure any checkboxes like "Use the same proxy server for all protocols" is
+    UNCHECKED. You want only HTTP
+    and HTTPS (SSL)!
+
+    
+      
+
+      Figure 3. Proxy Configuration Showing Internet Explorer
+      HTTP and HTTPS (Secure) Settings
+
+      
+        
+      
+    
+
+    After doing this, flush your browser's disk and memory caches to force
+    a re-reading of all pages and to get rid of any ads that may be cached.
+    Remove any cookies, if you want Privoxy
+    to manage that. You are now ready to start enjoying the benefits of using
+    Privoxy!
+
+    Privoxy itself is typically started
+    by specifying the main configuration file to be used on the command line.
+    If no configuration file is specified on the command line, Privoxy will look for a file named config in the current directory. Except on Win32 where it
+    will try config.txt.
+
+    
+      5.1. Red Hat
+      and Fedora
+
+      A default Red Hat installation may not start Privoxy upon boot. It will use the file /etc/privoxy/config as its main configuration file.
+
+      
-          
+          
+      
         
-            Privoxy 3.0.18 User Manual
-          
+            + # /etc/rc.d/init.d/privoxy start
+
+          
         
+
+      Or ...
+
+      
-          
-          
-          
         
-            Prev
-          
-          
-            Next
+          
+            + # service privoxy start
+
           
         
       
-      
     
-    
-      
-        5. Starting Privoxy
-      
-      
-        Before launching Privoxy for the
-        first time, you will want to configure your browser(s) to use Privoxy as a HTTP and HTTPS (SSL) proxy.
-        The default is 127.0.0.1 (or localhost) for the proxy address, and
-        port 8118 (earlier versions used port 8000). This is the one
-        configuration step that
-        must be done!
-      
-      
-        Please note that Privoxy can only
-        proxy HTTP and HTTPS traffic. It will not work with FTP or other
-        protocols.
-      
-      
-      
-      
-        
-        
-          Figure 2. Proxy Configuration Showing Mozilla/Netscape HTTP and
-          HTTPS (SSL) Settings
-        
-        
-          
-            
-          
-        
-      
 
-      
-        With Firefox, this is typically set
-        under:
-      
-      
-         Tools -> Options ->  Advanced -> Network ->Connection -> Settings

-         
-      
-      
-        Or optionally on some platforms:
-      
-      
-         Edit -> Preferences -> General -> Connection Settings -> Manual Proxy Configuration

-         
-      
-      
-        With Netscape (and Mozilla), this can be set under:
-      
-      
-         Edit -> Preferences -> Advanced -> Proxies -> HTTP Proxy

-         
-      
-      
-        For Internet Explorer v.5-7:
-      
-      
-         Tools -> Internet Options -> Connections -> LAN Settings
-      
-      
-        Then, check "Use Proxy" and fill in the
-        appropriate info (Address: 127.0.0.1, Port: 8118). Include HTTPS
-        (SSL), if you want HTTPS proxy support too (sometimes labeled "Secure"). Make sure any checkboxes like "Use the same proxy server for all protocols" is
-        UNCHECKED. You
-        want only HTTP and HTTPS (SSL)!
-      
-      
-      
-      
-        
-        
-          Figure 3. Proxy Configuration Showing Internet Explorer HTTP and
-          HTTPS (Secure) Settings
-        
-        
-          
-            
-          
-        
-      
+    
+      5.2.
+      Debian
 
-      
-        After doing this, flush your browser's disk and memory caches to
-        force a re-reading of all pages and to get rid of any ads that may be
-        cached. Remove any cookies, if you want Privoxy to manage that. You are now ready to
-        start enjoying the benefits of using Privoxy!
-      
-      
-        Privoxy itself is typically started
-        by specifying the main configuration file to be used on the command
-        line. If no configuration file is specified on the command line,
-        Privoxy will look for a file named
-        config in the current directory. Except on
-        Win32 where it will try config.txt.
-      
-      
-        
-          5.1. Red Hat and Fedora
-        
-        
-          A default Red Hat installation may not start Privoxy upon boot. It will use the file /etc/privoxy/config as its main configuration
-          file.
-        
-        
-        
-        
-          
-            
-          
-        
-- # /etc/rc.d/init.d/privoxy start
-
-            
-
-        
-          Or ...
-        
-        
-        
-        
-          
-            
-          
-        
-- # service privoxy start
-
-            
-      
-      
-        
-          5.2. Debian
-        
-        
-          We use a script. Note that Debian typically starts Privoxy upon booting per default. It will use
-          the file /etc/privoxy/config as its main
-          configuration file.
-        
-        
-        
-        
-          
-            
+        
+      
-+      We use a script. Note that Debian typically starts Privoxy upon booting per default. It will use the
+      file /etc/privoxy/config as its main
+      configuration file.
+
+      
+        
+          
-          
-        
+              # /etc/init.d/privoxy start
 
-            
-      
-      
-        
-          5.3. Windows
-        
-        
-          Click on the Privoxy Icon to start
-          Privoxy. If no configuration file
-          is specified on the command line, Privoxy will look for a file named config.txt. Note that Windows will automatically
-          start Privoxy when the system
-          starts if you chose that option when installing.
-        
-        
-          Privoxy can run with full Windows
-          service functionality. On Windows only, the Privoxy program has two new command line
-          arguments to install and uninstall Privoxy as a service. See the Windows Installation
-          instructions for details.
-        
-      
-      
-        
-          5.4. Solaris, NetBSD, FreeBSD, HP-UX and
-          others
-        
-        
-          Example Unix startup command:
-        
-        
-        
-        
-          
-            
+        
+      
-+          
+    
+
+    
+      5.3.
+      Windows
+
+      Click on the Privoxy Icon to start
+      Privoxy. If no configuration file is
+      specified on the command line, Privoxy
+      will look for a file named config.txt. Note
+      that Windows will automatically start Privoxy when the system starts if you chose that
+      option when installing.
+
+      Privoxy can run with full Windows
+      service functionality. On Windows only, the Privoxy program has two new command line arguments
+      to install and uninstall Privoxy as a
+      service. See the Windows Installation
+      instructions for details.
+    
+
+    
+      5.4.
+      Solaris, NetBSD, FreeBSD, HP-UX and others
+
+      Example Unix startup command:
+
+      
+        
+          
-          
-        
+              # /usr/sbin/privoxy /etc/privoxy/config
 
-            
-      
-      
-        
-          5.5. OS/2
-        
-        
-          During installation, Privoxy is
-          configured to start automatically when the system restarts. You can
-          start it manually by double-clicking on the Privoxy icon in the Privoxy folder.
-        
-      
-      
-        
-          5.6. Mac OS X
-        
-        
-          After downloading the privoxy software, unzip the downloaded file
-          by double-clicking on the zip file icon. Then, double-click on the
-          installer package icon and follow the installation process.
-        
-        
-          The privoxy service will automatically start after a successful
-          installation. In addition, the privoxy service will automatically
-          start every time your computer starts up.
-        
-        
-          To prevent the privoxy service from automatically starting when
-          your computer starts up, remove or rename the folder named
-          /Library/StartupItems/Privoxy.
-        
-        
-          A simple application named Privoxy Utility has been created which
-          enables administrators to easily start and stop the privoxy
-          service.
-        
-        
-          In addition, the Privoxy Utility presents a simple way for
-          administrators to edit the various privoxy config files. A method
-          to uninstall the software is also available.
-        
-        
-          An administrator username and password must be supplied in order
-          for the Privoxy Utility to perform any of the tasks.
-        
-      
-      
-        
-          5.7. AmigaOS
-        
-        
-          Start Privoxy (with RUN
-          <>NIL:) in your startnet script
-          (AmiTCP), in s:user-startup (RoadShow),
-          as startup program in your startup script (Genesis), or as startup
-          action (Miami and MiamiDx). Privoxy will automatically quit when you quit
-          your TCP/IP stack (just ignore the harmless warning your TCP/IP
-          stack may display that Privoxy is
-          still running).
-        
-      
-      
-        
-          5.8. Gentoo
-        
-        
-          A script is again used. It will use the file /etc/privoxy/config as its main configuration file.
-        
-        
-        
-        
-          
-            
-          
-        
-- /etc/init.d/privoxy start
-
-            
-
-        
-          Note that Privoxy is not
-          automatically started at boot time by default. You can change this
-          with the rc-update command.
-        
-        
-        
-        
-          
-            
-          
-        
-- rc-update add privoxy default
-
-            
-      
-      
-        
-          5.9. Command Line Options
-        
-        
-          Privoxy may be invoked with the
-          following command-line options:
-        
-        
-        
-        
-          
-            
-              --version
-            
-            
-              Print version info and exit. Unix only.
-            
-          
-          
-            
-              --help
-            
-            
-              Print short usage info and exit. Unix only.
-            
-          
-          
-            
-              --no-daemon
-            
-            
-              Don't become a daemon, i.e. don't fork and become process group
-              leader, and don't detach from controlling tty. Unix only.
-            
-          
-          
-            
-              --pidfile
-              FILE
-            
-            
-              On startup, write the process ID to FILE. Delete the FILE on exit. Failure
-              to create or delete the FILE is non-fatal. If no FILE option is given,
-              no PID file will be used. Unix only.
-            
-          
-          
-            
-              --user
-              USER[.GROUP]
-            
-            
-              After (optionally) writing the PID file, assume the user ID of
-              USER, and
-              if included the GID of GROUP. Exit if the privileges are not
-              sufficient to do so. Unix only.
-            
-          
-          
-            
-              --chroot
-            
-            
-              Before changing to the user ID given in the --user option, chroot
-              to that user's home directory, i.e. make the kernel pretend to
-              the Privoxy process that the
-              directory tree starts there. If set up carefully, this can
-              limit the impact of possible vulnerabilities in Privoxy to the files contained in that
-              hierarchy. Unix only.
-            
-          
-          
-            
-              --pre-chroot-nslookup hostname
-            
-            
-              Specifies a hostname to look up before doing a chroot. On some
-              systems, initializing the resolver library involves reading
-              config files from /etc and/or loading additional shared
-              libraries from /lib. On these systems, doing a hostname lookup
-              before the chroot reduces the number of files that must be
-              copied into the chroot tree.
-            
-            
-              For fastest startup speed, a good value is a hostname that is
-              not in /etc/hosts but that your local name server (listed in
-              /etc/resolv.conf) can resolve without recursion (that is,
-              without having to ask any other name servers). The hostname
-              need not exist, but if it doesn't, an error message (which can
-              be ignored) will be output.
-            
-          
-          
-            
-              configfile
-            
-            
-              If no configfile is included on the command
-              line, Privoxy will look for a
-              file named "config" in the current
-              directory (except on Win32 where it will look for "config.txt" instead). Specify full path to
-              avoid confusion. If no config file is found, Privoxy will fail to start.
-            
-          
-        
-
-        
-          On MS Windows only there are two
-          additional command-line options to allow Privoxy to install and run as a service. See the Window Installation
-          section for details.
-        
-      
+          
     
-    
-      
-      
+
+    
+      5.5. OS/2
+
+      During installation, Privoxy is
+      configured to start automatically when the system restarts. You can
+      start it manually by double-clicking on the Privoxy icon in the Privoxy folder.
+    
+
+    
+      5.6. Mac OS
+      X
+
+      After downloading the privoxy software, unzip the downloaded file by
+      double-clicking on the zip file icon. Then, double-click on the
+      installer package icon and follow the installation process.
+
+      The privoxy service will automatically start after a successful
+      installation. In addition, the privoxy service will automatically start
+      every time your computer starts up.
+
+      To prevent the privoxy service from automatically starting when your
+      computer starts up, remove or rename the folder named
+      /Library/StartupItems/Privoxy.
+
+      A simple application named Privoxy Utility has been created which
+      enables administrators to easily start and stop the privoxy
+      service.
+
+      In addition, the Privoxy Utility presents a simple way for
+      administrators to edit the various privoxy config files. A method to
+      uninstall the software is also available.
+
+      An administrator username and password must be supplied in order for
+      the Privoxy Utility to perform any of the tasks.
+    
+
+    
+      5.7.
+      AmigaOS
+
+      Start Privoxy (with RUN
+      <>NIL:) in your startnet script
+      (AmiTCP), in s:user-startup (RoadShow), as
+      startup program in your startup script (Genesis), or as startup action
+      (Miami and MiamiDx). Privoxy will
+      automatically quit when you quit your TCP/IP stack (just ignore the
+      harmless warning your TCP/IP stack may display that Privoxy is still running).
+    
+
+    
+      5.8.
+      Gentoo
+
+      A script is again used. It will use the file /etc/privoxy/config as its main configuration file.
+
+      

-          
-          
-          
+      
         
-            Prev
-          
-            Home
-          
-            Next
+          
+            + /etc/init.d/privoxy start
+
+
           
         
+
+      Note that Privoxy is not
+      automatically started at boot time by default. You can change this with
+      the rc-update command.
+
+      
-          
-          
-          
         
-            Quickstart to Using Privoxy
-          
-             
-          
-            Privoxy Configuration
+          
+            + rc-update add privoxy default
+
+
           
         
       
     
-  
-
 
+    
+      5.9. Command
+      Line Options
+
+      Privoxy may be invoked with the
+      following command-line options:
+
+      
+        
+          --version
+
+          Print version info and exit. Unix only.
+        
+
+        
+          --help
+
+          Print short usage info and exit. Unix only.
+        
+
+        
+          --no-daemon
+
+          Don't become a daemon, i.e. don't fork and become process group
+          leader, and don't detach from controlling tty. Unix only.
+        
+
+        
+          --pidfile FILE
+
+          On startup, write the process ID to FILE. Delete the FILE on exit. Failure to create or
+          delete the FILE is
+          non-fatal. If no FILE
+          option is given, no PID file will be used. Unix only.
+        
+
+        
+          --user
+          USER[.GROUP]
+
+          After (optionally) writing the PID file, assume the user ID of
+          USER, and if included the
+          GID of GROUP. Exit if the privileges are not sufficient to do so.
+          Unix only.
+        
+
+        
+          --chroot
+
+          Before changing to the user ID given in the --user option, chroot to that user's
+          home directory, i.e. make the kernel pretend to the Privoxy process that the directory tree starts
+          there. If set up carefully, this can limit the impact of possible
+          vulnerabilities in Privoxy to the
+          files contained in that hierarchy. Unix only.
+        
+
+        
+          --pre-chroot-nslookup
+          hostname
+
+          Specifies a hostname to look up before doing a chroot. On some
+          systems, initializing the resolver library involves reading config
+          files from /etc and/or loading additional shared libraries from
+          /lib. On these systems, doing a hostname lookup before the chroot
+          reduces the number of files that must be copied into the chroot
+          tree.
+
+          For fastest startup speed, a good value is a hostname that is
+          not in /etc/hosts but that your local name server (listed in
+          /etc/resolv.conf) can resolve without recursion (that is, without
+          having to ask any other name servers). The hostname need not exist,
+          but if it doesn't, an error message (which can be ignored) will be
+          output.
+        
+
+        
+          configfile
+
+          If no configfile is
+          included on the command line, Privoxy will look for a file named
+          "config" in the current directory
+          (except on Win32 where it will look for "config.txt" instead). Specify full path to avoid
+          confusion. If no config file is found, Privoxy will fail to start.
+        
+      
+
+      On MS Windows only there are two
+      additional command-line options to allow Privoxy to install and run as a service. See the Window Installation
+      section for details.
+    
+  
+
+  
+    
+
+    
+      
+        
+
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Quickstart to Using
+        Privoxy   Privoxy Configuration
+  
+
+
diff --git a/doc/webserver/user-manual/templates.html b/doc/webserver/user-manual/templates.html
index 11784d98..9342a8da 100644
--- a/doc/webserver/user-manual/templates.html
+++ b/doc/webserver/user-manual/templates.html
@@ -1,186 +1,172 @@
-
+
+
 
-  
-    
-    
-      Privoxy's Template Files
-    
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
-        
-          
-          
-          
-        
-      
-            Privoxy 3.0.18 User Manual
-          

-            Prev
-          
-          
-            Next
-          
-      
-    
-    
-      
-        10. Privoxy's Template Files
-      
-      
-        All Privoxy built-in pages, i.e.
-        error pages such as the "404 - No Such Domain" error
-        page, the "BLOCKED" page and all pages of
-        its web-based user
-        interface, are generated from templates. (Privoxy must be running for the above links to
-        work as intended.)
-      
-      
-        These templates are stored in a subdirectory of the configuration directory called templates. On Unixish platforms, this is typically /etc/privoxy/templates/.
-      
-      
-        The templates are basically normal HTML files, but with place-holders
-        (called symbols or exports), which Privoxy fills at run time. It is possible to
-        edit the templates with a normal text editor, should you want to
-        customize them. (Not
-        recommended for the casual user). Should you create your
-        own custom templates, you should use the config setting templdir to specify an alternate location,
-        so your templates do not get overwritten during upgrades.
-      
-      
-        Note that just like in configuration files, lines starting with # are ignored when the templates are filled in.
-      
-      
-        The place-holders are of the form @name@,
-        and you will find a list of available symbols, which vary from
-        template to template, in the comments at the start of each file. Note
-        that these comments are not always accurate, and that it's probably
-        best to look at the existing HTML code to find out which symbols are
-        supported and what they are filled in with.
-      
-      
-        A special application of this substitution mechanism is to make whole
-        blocks of HTML code disappear when a specific symbol is set. We use
-        this for many purposes, one of them being to include the beta warning
-        in all our user interface (CGI) pages when Privoxy is in an alpha or beta development
-        stage:
-      
-      
-      
-      
-        
-          
+      
+    
-+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  table.c3 {background-color: #E0E0E0}
+  span.c2 {font-style: italic}
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy 3.0.18 User Manual
Prev Next
+    
+  
+
+  
+    10. Privoxy's
+    Template Files
+
+    All Privoxy built-in pages, i.e.
+    error pages such as the "404 - No Such Domain" error page,
+    the "BLOCKED" page and all pages
+    of its web-based user
+    interface, are generated from templates. (Privoxy must be running for the above links to work
+    as intended.)
+
+    These templates are stored in a subdirectory of the configuration directory called templates. On Unixish platforms, this is typically
+    /etc/privoxy/templates/.
+
+    The templates are basically normal HTML files, but with place-holders
+    (called symbols or exports), which Privoxy fills at run time. It is possible to edit
+    the templates with a normal text editor, should you want to customize
+    them. (Not recommended for the casual
+    user). Should you create your own custom templates, you should use
+    the config setting templdir to specify an alternate location, so
+    your templates do not get overwritten during upgrades.
+
+    Note that just like in configuration files, lines starting with
+    # are ignored when the templates are filled
+    in.
+
+    The place-holders are of the form @name@, and
+    you will find a list of available symbols, which vary from template to
+    template, in the comments at the start of each file. Note that these
+    comments are not always accurate, and that it's probably best to look at
+    the existing HTML code to find out which symbols are supported and what
+    they are filled in with.
+
+    A special application of this substitution mechanism is to make whole
+    blocks of HTML code disappear when a specific symbol is set. We use this
+    for many purposes, one of them being to include the beta warning in all
+    our user interface (CGI) pages when Privoxy is in an alpha or beta development
+    stage:
+
+    
+      
+        
-        
-      
+           <!-- @if-unstable-start -->
 
   ... beta warning HTML code goes here ...
 
 <!-- if-unstable-end@ -->
 
-          
-
-      
-        If the "unstable" symbol is set, everything in between and including
-        @if-unstable-start and if-unstable-end@ will disappear, leaving nothing but
-        an empty comment:
-      
-      
-      
-      
-        
-          
+      
+    
-+        
+
+    If the "unstable" symbol is set, everything in between and including
+    @if-unstable-start and if-unstable-end@ will disappear, leaving nothing but an
+    empty comment:
+
+    
+      
+        
-        
-      
+           <!--  -->
 
-          
-
-      
-        There's also an if-then-else construct and an #include mechanism, but you'll sure find out if you
-        are inclined to edit the templates ;-)
-      
-      
-        All templates refer to a style located at http://config.privoxy.org/send-stylesheet. This
-        is, of course, locally served by Privoxy and the source for it can be found and
-        edited in the cgi-style.css template.
-      
-    
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-            Prev
-          
-            Home
-          
-            Next
-          

-            Filter Files
-          
-             
-          
-            Contacting the Developers, Bug Reporting and Feature Requests
-          
-    
-  
-
+        
+
+    There's also an if-then-else construct and an #include mechanism, but you'll sure find out if you are
+    inclined to edit the templates ;-)
+
+    All templates refer to a style located at http://config.privoxy.org/send-stylesheet. This is, of
+    course, locally served by Privoxy and
+    the source for it can be found and edited in the cgi-style.css template.
+  
+
+  
+    
 
+    
+      
+        
+
+        
+
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Filter Files   Contacting the Developers,
+        Bug Reporting and Feature Requests
+  
+
+
diff --git a/doc/webserver/user-manual/whatsnew.html b/doc/webserver/user-manual/whatsnew.html
index 5a8cfa65..3e38ba0c 100644
--- a/doc/webserver/user-manual/whatsnew.html
+++ b/doc/webserver/user-manual/whatsnew.html
@@ -1,700 +1,1010 @@
-
+
+
 
-  
-    
-    
-      What's New in this Release
-    
-    
-    
-    
-    
-    
-    
-    
-
-  
-  
-    
-      
-        
-          
-        
-        
-          
-          
-          
-        
-      
-            Privoxy 3.0.18 User Manual
-          

-            Prev
-          
-          
-            Next
-          
-      
-    
-    
-      
-        3. What's New in this Release
-      
-      
-        Privoxy 3.0.17 is a stable release.
-        The changes since 3.0.16 stable are:
-      
-      
-      
+  }
+  :link { color: #0000FF }
+  :visited { color: #840084 }
+  :active { color: #0000FF }
+  hr.c1 {text-align: left}
+  
+
+
+
+  
+    
+      
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Privoxy 3.0.18 User Manual
Prev Next
+    
+  
+
+  
+    3. What's New in this
+    Release
+
+    Privoxy 3.0.18 is a stable release.
+    The changes since 3.0.17 stable are:
+
+    
+      
+        Bug fixes:
+
+        
+          
+            Fix a logic bug that could cause Privoxy to reuse a tainted
+            server socket. It could happen for server sockets that got
+            tainted by a server-header-tagger-induced block, in which case
+            Privoxy doesn't necessarily read the whole server response. If
+            keep-alive was enabled and the request following the blocked one
+            was to the same host and using the same forwarding settings,
+            Privoxy would send it on the tainted server socket. While the
+            server would simply treat it as a pipelined request, Privoxy
+            would later on fail to properly parse the server's response as it
+            would try to parse the unread data from the first response as
+            server headers for the second one. Regression introduced in
+            3.0.17.
+          
+
+          
+            When implying keep-alive in client_connection(), remember that
+            the client didn't Fixes a regression introduced in 3.0.13 that
+            would cause Privoxy to wait for additional client requests after
+            receiving a HTTP/1.1 request with "Connection: close" set and
+            connection sharing enabled. With clients like curl which
+            terminates the client connection after detecting that the whole
+            body has been received it doesn't really matter, but with clients
+            like FreeBSD's fetch the client connection would be kept open
+            until it timed out.
+          
+
+          
+            Fix a subtle race condition between
+            prepare_csp_for_next_request() and sweep() A thread preparing
+            itself for the next client request could briefly appear to be
+            inactive. If all other threads were already using more recent
+            files, the thread could get its files swept away under its feet.
+            I've only seen it while stress testing in valgrind while touching
+            action files in a loop. It's unlikely to have caused any actual
+            problems in the real world.
+          
+        
+      
+
+      
+        General improvements:
+
+        
+          
+            Privoxy can (re)compress buffered content before delivering it
+            to the client. Disabled by default as most users wouldn't benefit
+            from it.
+          
+
+          
+            The +fast-redirects{check-decoded-url} action checks URL
+            segments separately. If there are other parameters behind the
+            redirect URL, this makes it unnecessary to cut them of by
+            additionally using a +redirect{} pcrs command. Initial patch
+            submitted by Jamie Zawinski in #3429848.
+          
+
+          
+            Properly deal with FEATURE_TOGGLE being disabled
+          
+
+          
+            Adjust url_code_map[] so spaces are replaced with %20 instead
+            of '+' While '+' can be used by client's submitting form data,
+            this is not actually what Privoxy is using the lookups for. This
+            is more of a cosmetic issue and doesn't fix any actual problems
+            I'm aware of.
+          
+
+          
+            When compiled without FEATURE_FAST_REDIRECTS, do not silently
+            ignore +fast-redirect{} directives
+          
+
+          
+            Added a workaround for GNU libc's strptime() reporting
+            negative year values when the parsed year is only specified with
+            two digits. On affected systems cookies with such a date would
+            not be turned into session cookies by the +session-cookies-only
+            action. Reported by Vaeinoe in #3403560
+          
+
+          
+            When loading action sections, verify that the referenced
+            filters exist Currently missing filters only result in an error
+            message, but eventually the severity will be upgraded to
+            fatal.
+          
+
+          
+            Allow to bind to multiple separate addresses. Patch set
+            submitted by Petr Pisar in #3354485.
+          
+
+          
+            Set socket_error to errno if connecting fails in
+            rfc2553_connect_to() Previously rejected direct connections could
+            be incorrectly reported as DNS issues.
+          
+
+          
+            Fixed bind failures with certain GNU libc versions if no
+            non-loopback IP address has been configured on the system. This
+            is mainly an issue if the system is using DHCP and Privoxy is
+            started before the network is completely configured. Reported by
+            Raphael Marichez in #3349356. Additional insight from Petr
+            Pisar.
+          
+
+          
+            Disable filters if SDCH compression is used unless filtering
+            is forced. If SDCH was combined with a supported compression
+            algorithm, we'd previously try to decompress it, when successful
+            apply the enabled filters and ditch the Content-Encoding header
+            even though the SDCH compression wasn't removed. Reported by
+            zebul666 in #3225863.
+          
+
+          
+            Privoxy log messages now use the ISO 8601 date format
+            %Y-%m-%d. It's only slightly longer than the old format, but
+            contains the full date including the year and allows sorting by
+            date (when grepping in multiple log files) without hassle.
+          
+
+          
+            Make a copy of the --user value and only mess with that when
+            splitting user and group. On some operating systems modifying the
+            value directly is reflected in the output of ps and friends and
+            can be misleading. Reported by zepard in #3292710.
+          
+
+          
+            If forwarded-connect-retries is set, only retry if the we are
+            actually forwarding the request. Previously direct connections
+            would be retried as well.
+          
+
+          
+            Fixed a small memory leak when retrying connection
+          
+
+          
+            Remove an incorrect assertion in
+            compile_dynamic_pcrs_job_list() It could be triggered by a pcrs
+            job with an invalid pcre pattern (for example one that contains a
+            lone quantifier).
+          
+        
+      
+
+      
+        Action file improvements:
+
+        
+          
+            Moved the site-specific block pattern section below the one
+            for the generic patterns so for requests that are matched in
+            both, the block reason for the domain is shown which is usually
+            more useful than showing the one for the generic pattern.
+          
+
+          
+            Add a (disabled) section to block various Facebook tracking
+            URLs Reported by Dan Stahlke in #3421764.
+          
+
+          
+            Add a (disabled) section to rewrite and redirect
+            click-tracking URLs used on news.google.com Reported by Dan
+            Stahlke in #3421755.
+          
+
+          
+            Unblock linuxcounter.net/ Reported by Dan Stahlke in
+            #3422612.
+          
+
+          
+            Block 'www91.intel.com/' which is used by Omniture. Reported
+            by Adam Piggott in #3167370.
+          
+
+          
+            Disable the handle-as-empty-doc-returns-ok option and mark it
+            as deprecated. Reminded by tceverling in #2790091.
+          
+
+          
+            Add ".ivwbox.de/" to the "Cross-site user tracking" section.
+            Reported by Nettozahler in #3172525.
+          
+
+          
+            Unblock and fast-redirect ".awin1.com/.*=http://" Reported by
+            Adam Piggott in #3170921.
+          
+
+          
+            Block "b.collective-media.net/".
+          
+
+          
+            Widen the Debian popcon exception to "qa.debian.org/popcon".
+            Seen in Debian's 05_default_action.dpatch by Roland
+            Rosenfeld.
+          
+
+          
+            Block ".gemius.pl/" which only seems to be used for user
+            tracking. Reported by johnd16 in #3002731. Additional input from
+            Lee and movax.
+          
+
+          
+            Disable banners-by-size filters for '.thinkgeek.com/' The
+            filter only seems to catch pictures of the inventory.
+          
+
+          
+            Block requests for 'go.idmnet.bbelements.com/please/showit/'
+            Reported by kacperdominik in #3372959.
+          
+
+          
+            Unblock adainitiative.org/
+          
+
+          
+            Add a fast-redirects exception for
+            '.googleusercontent.com/.*=cache'
+          
+
+          
+            Add a fast-redirects exception for
+            webcache.googleusercontent.com/
+          
+
+          
+            Remove -prevent-compression from the fragile alias It's no
+            longer used anywhere by default and isn't known to break stuff
+            anyway.
+          
+
+          
+            Unblock http://adassier.wordpress.com/ and
+            http://adassier.files.wordpress.com/
+          
+        
+      
+
+      
+        Filter file improvements:
+
+        
+          
+            Let the yahoo filter hide '.ads'
+          
+
+          
+            Let the msn filter hide overlay ads for Facebook 'likes' in
+            search results.
+          
+
+          
+            Let the msn filter hide elements with the id 's_notf_div'.
+            They only seem to be used to advertise site 'enhancements'.
+          
+
+          
+            Let the js-events filter additionally disarm setInterval()
+            Suggested by dg1727 in #3423775.
+          
+        
+      
+
+      
+        Documentation improvements:
+
+        
+          
+            Clarify the effect of compiling Privoxy with zlib support
+            Suggested by dg1727 in #3423782.
+          
+
+          
+            Point out that the SourceForge messaging system works like a
+            blackhole and should thus not be used
+          
+
+          
+            Mention some of the problems one can experience when not
+            explicitly configuring an IP addresses as listen address.
+          
+
+          
+            Explicitly mention that hostnames can be used instead of IP
+            addresses for the listen-address, that only the first address
+            returned will be used and what happens if the address is invalid.
+            Requested by Calestyo in #3302213.
+          
+        
+      
+
+      
+        Log message improvements:
+
+        
+          
+            If only the server connection is kept alive, do not pretent to
+            wait for a new client request.
+          
+
+          
+            Remove a superfluos log message in forget_connection()
+          
+
+          
+            In chat(), properly report missing server responses as such
+            instead of calling them empty
+          
+
+          
+            In forwarded_connect(), fix a log message nobody should ever
+            see
+          
+
+          
+            Fix a log message in socks5_connect(), a failed write
+            operation was logged as failed read operation
+          
+
+          
+            Let load_one_actions_file() properly complain about a missing
+            '{' at the beginning of the file Simply stating that a line is
+            invalid isn't particularly helpful.
+          
+
+          
+            Do not claim to listen on a socket until we actually do. Patch
+            submitted by Petr Pisar #3354485
+          
+
+          
+            Prevent a duplicated LOG_LEVEL_CLF message when sending out
+            the "no-server-data" response
+          
+
+          
+            Also log the client socket when dropping a connection.
+          
+
+          
+            Include the destination host in the 'Request ... marked for
+            blocking. limit-connect{...} doesn't allow CONNECT ...' message
+            Patch submitted by Saperski in #3296250.
+          
+
+          
+            Prevent a duplicated log message if none of the resolved IP
+            addresses were reachable
+          
+
+          
+            In connect_to(), do not pretend to retry if
+            forwarded-connect-retries is zero or unset.
+          
+
+          
+            When a specified user or group can't be found, put the name in
+            single-quotes when logging it.
+          
+
+          
+            In rfc2553_connect_to(), explain getnameinfo() errors
+            differently.
+          
+
+          
+            Remove a useless log message in chat()
+          
+
+          
+            When retrying to connect, also log the maximum number of
+            connection attempts
+          
+
+          
+            Rephrase a log message in compile_dynamic_pcrs_job_list()
+            Divide the error code and its meaning with a colon. Call the pcrs
+            job dynamic and not the filter. Filters may contain dynamic and
+            non-dynamic pcrs jobs at the same time. Only mention the name of
+            the filter or tagger, but don't claim it's a filter when it could
+            be a tagger.
+          
+
+          
+            In a fatal error message in load_one_actions_file(), cover
+            both URL and TAG patterns
+          
+
+          
+            In pcrs_strerror(), properly report unknown positive error
+            code values as unknown. Previously they were handled like 0 (no
+            error).
+          
+
+          
+            In compile_dynamic_pcrs_job_list(), also log the actual error
+            code as pcrs_strerror() doesn't handle all errors reported by
+            pcre
+          
+
+          
+            Don't bother trying to continue chatting if the client didn't
+            ask for it. Reduces log noise a bit.
+          
+
+          
+            Make two fatal error message in load_one_actions_file() more
+            descriptive
+          
+
+          
+            In cgi_send_user_manual(), log when rejecting a file name due
+            to '/' or '..'
+          
+
+          
+            In load_file(), log a message if opening a file failed The CGI
+            error message alone isn't too helpful.
+          
+
+          
+            In connection_destination_matches(), improve two log messages
+            to help understand why the destinations don't match
+          
+
+          
+            Rephrase a log message in serve(). Client request arrival
+            should be differentiated from closed client connections now.
+          
+
+          
+            In serve(), log if a client connection isn't reused due to a
+            configuration file change.
+          
+
+          
+            Let mark_server_socket_tainted() always mark the server socket
+            tainted, just don't talk about it in cases where it has no
+            effect. It doesn't change Privoxy's behaviour, but makes
+            understanding the log file easier.
+          
+        
+      
+
+      
+        Miscellaneous Privoxy improvements:
+
+        
+          
+            In get_last_url(), do not bother trying to decode URLs that do
+            not contain at least one '%' sign. It reduces the log noise and a
+            number of unnecessary memory allocations.
+          
+
+          
+            If the --user argument user[.group] contains a dot, always
+            bail out if no group has been specified. Previously the intended,
+            but undocumented (and apparently untested), behaviour was to try
+            interpreting the whole argument as user name, but the detection
+            was flawed and checked for '0' isntead of '\0', thus merely
+            preventing group names beginning with a zero.
+          
+
+          
+            Simplify the signal setup in main()
+          
+
+          
+            Streamline socks5_connect() slightly
+          
+
+          
+            In case of SOCKS5 failures, dump the socks response
+          
+
+          
+            In socks5_connect(), require a complete socks response from
+            the server Previously we didn't care how much data the server
+            response contained as long as the first two bytes contained the
+            expected values. While at it, shrink the buffer size so we can't
+            read more than a whole socks response. This is required to
+            support Tor's optimistic data extension.
+          
+
+          
+            In chat(), do not bother to generate a client request in case
+            of direct CONNECT requests
+          
+
+          
+            Reduce server_last_modified()'s stack size
+          
+
+          
+            Shorten get_http_time() by using strftime()
+          
+
+          
+            Constify the known_http_methods pointers in
+            unknown_method()
+          
+
+          
+            Constify the time_formats pointers in parse_header_time()
+          
+
+          
+            Constify the formerly_valid_actions pointers in
+            action_used_to_be_valid()
+          
+
+          
+            In html_code_map[], use a numeric character reference instead
+            of ' which wasn't standardized before XHTML 1.0
+          
+
+          
+            Introduce a MAN_PAGE variable that defaults to privoxy.1. The
+            Debian package uses section 8 for the man page and this should
+            simplify the patch.
+          
+
+          
+            Deduplicate the INADDR_NONE definition for Solaris by moving
+            it to jbsockets.h
+          
+
+          
+            In block_url(), ditch the obsolete workaround for ancient
+            Netscape versions that supposedly couldn't properly deal with
+            status code 403.
+          
+
+          
+            Remove a useless NULL pointer check in load_trustfile()
+          
+
+          
+            Remove two useless NULL pointer checks in
+            load_one_re_filterfile().
+          
+
+          
+            Change url_code_map[] from an array of pointers to an array of
+            arrays It removes an unnecessary layer of indirection and on
+            64bit system reduces the size of the binary a bit.
+          
+
+          
+            Fix various typos. Fixes taken from Debian's 29_typos.dpatch
+            by Roland Rosenfeld.
+          
+
+          
+            Add a dok-tidy GNUMakefile target to clean up the messy HTML
+            generated by the other dok targets.
+          
+
+          
+            GNUisms in the GNUMakefile have been removed.
+          
+
+          
+            Change the HTTP version in static responses to 1.1
+          
+
+          
+            Synced config.sub and config.guess with upstream
+            2011-11-11/386c7218162c145f5f9e1ff7f558a3fbb66c37c5.
+          
+
+          
+            Add a dedicated function to parse the values of toggles
+            Reduces duplicated code in load_config() and provides better
+            error handling. Invalid or missing toggle values are now a fatal
+            error instead of being silently ignored.
+          
+
+          
+            Terminate HTML lines in static error messages with \n instead
+            of \r\n.
+          
+
+          
+            Simplify cgi_error_unknown() a bit.
+          
+
+          
+            In LogPutString(), don't bother looking at pszText when not
+            actually logging anything
+          
+
+          
+            Change ssplit()'s fourth parameter from int to size_t. Fixes a
+            clang complaint.
+          
+
+          
+            Add a warning that the statistics currently can't be trusted.
+            Mention Privoxy-Log-Parser's --statistics option as an
+            alternative for the time being.
+          
+
+          
+            In rfc2553_connect_to(), start setting cgi->error_message
+            on error
+          
+
+          
+            Change the expected status code returned for http://p.p/die
+            depending on whether or not FEATURE_GRACEFUL_TERMINATION is
+            available.
+          
+
+          
+            In cgi_die(), mark the client connection for closing. If the
+            client will fetch the style sheet through another connection it
+            gets the main thread out of the accept() state and should thus
+            trigger the actual shutdown.
+          
+
+          
+            Add a proper CGI message for cgi_die().
+          
+
+          
+            Fix an invalid free when compiled with
+            FEATURE_GRACEFUL_TERMINATION and shut down through
+            http://config.privoxy.org/die
+          
+
+          
+            Don't enforce a logical line length limit in
+            read_config_line()
+          
+
+          
+            Slightly refactor server_last_modified() to remove useless
+            gmtime*() calls
+          
+
+          
+            In get_content_type(), also recognize '.jpeg' as JPEG
+            extension
+          
+
+          
+            Add '.png' to the list of recognized file extenstions in
+            get_content_type()
+          
+
+          
+            In block_url(), consistently use the block reason "Request
+            blocked by Privoxy" In two places the reason was "Request for
+            blocked URL" which hides the fact that the request got blocked by
+            Privoxy and isn't necessarly correct as the block may be due to
+            tags.
+          
+
+          
+            In get_actions(), fix the "temporary" backwards compatibility
+            hack to accept block actions without reason. It also covered
+            other actions that should be rejected as invalid. Reported by
+            Billy Crook.
+          
+
+          
+            In listen_loop(), reload the configuration files after
+            accepting a new connection instead of before. Previously the
+            first connection that arrived after a configuration change would
+            still be handled with the old configuration.
+          
+
+          
+            In chat()'s receive-data loop, skip a client socket check if
+            the socket will be written to right away anyway. This can
+            increase the transfer speed for unfiltered content on fast
+            network connections.
+          
+
+          
+            The socket timeout is used for SOCKS negotiation as well.
+          
+
+          
+            Don't keep the client connection alive if any configuration
+            file changed since the time the connection came in. This is
+            closer to Privoxy's behaviour before keep-alive support for
+            client connection has been added and also less confusing in
+            general.
+          
+
+          
+            Treat all Content-Type header values containing the pattern
+            'script' as a sign of text. Reported by pribog in #3134970.
+          
+        
+      
+
+      
+        configure:
+
+        
+          
+            Added a --disable-ipv6-support switch for platforms where
+            support is detected but doesn't actually work.
+          
+
+          
+            Do not check for the existence of strerror() and memmove()
+            twice
+          
+
+          
+            Remove a useless test for setpgrp(2). Privoxy doesn't need it
+            and it can cause problems when cross-compiling
+          
+
+          
+            Rename the --disable-acl-files switch to --disable-acl-support
+            Since about 2001, ACL directives are specified in the standard
+            config file.
+          
+
+          
+            Update the URL of the 'Removing outdated PCRE version after
+            the next stable release' posting. The old URL stopped working
+            after one of SF's recent layout pessimizations. Reported by Han
+            Liu.
+          
+        
+      
+
+      
+        Privoxy-Regression-Test:
+
+        
+          
+            Added --shuffle-tests option to increase the chances of
+            detection race conditions
+          
+
+          
+            Added a --local-test-file option that allows to use
+            Privoxy-Regression-Test without Privoxy
+          
+
+          
+            Added tests for missing socks4 and socks4a forwarders
+          
+
+          
+            The --privoxy-address option now works with IPv6 addresses
+            containing brackets, too
+          
+
+          
+            Perform limited sanity checks for parameters that are supposed
+            to have numerical values.
+          
+
+          
+            Added a --sleep-time option to specify a number of seconds to
+            sleep between tests, defaults to 0.
+          
+
+          
+            Disable the range-requests tagger for tests that break if it's
+            enabled
+          
+
+          
+            Log messages use the ISO 8601 date format %Y-%m-%d.
+          
+
+          
+            Fix spelling in two error messages.
+          
+
+          
+            In the --help output, include a list of supported tests and
+            their default levels.
+          
+        
+      
+
+      
+        Privoxy-Log-Parser:
+
+        
+          
+            Perform limited sanity checks for parameters that are supposed
+            to have numerical values.
+          
+
+          
+            Implement a --unbreak-lines-only option to try to revert MUA
+            breakage.
+          
+
+          
+            Accept and highlight: Added header: Content-Encoding:
+            deflate
+          
+
+          
+            Accept and highlight: Compressed content from 29258 to 8630
+            bytes.
+          
+
+          
+            Accept and highlight: Client request arrived in time on socket
+            21.
+          
+
+          
+            Highlight: Didn't receive data in time: a.fsdn.com:443
+          
+
+          
+            Accept log messages with ISO 8601 time stamps, too
+          
+        
+      
+
+      
+        uagen:
+
+        
+          
+            Bump generated Firefox version to 9.0
+          
+
+          
+            Only randomize the release date if the new
+            --randomize-release-date option is enabled. Firefox versions
+            after 4 use a fixed date string without meaning.
+          
+        
+      
+    
+
+    
+      3.1. Note
+      to Upgraders
+
+      A quick list of things to be aware of before upgrading from earlier
+      versions of Privoxy:
+
       
         
-          
-            Fixed last-chunk-detection for responses where the content was
-            small enough to be read with the body, causing Privoxy to wait
-            for the end of the content until the server closed the connection
-            or the request timed out. Reported by "Karsten" in #3028326.
-          
-        
-        
-          
-            Responses with status code 204 weren't properly detected as
-            body-less like RFC2616 mandates. Like the previous bug, this
-            caused Privoxy to wait for the end of the content until the
-            server closed the connection or the request timed out. Fixes
-            #3022042 and #3025553, reported by a user with no visible name.
-            Most likely also fixes a bunch of other AJAX-related problem
-            reports that got closed in the past due to insufficient
-            information and lack of feedback.
-          
-        
-        
-          
-            Fixed an ACL bug that made it impossible to build a blacklist.
-            Usually the ACL directives are used in a whitelist, which worked
-            as expected, but blacklisting is still useful for public proxies
-            where one only needs to deny known abusers access.
-          
-        
-        
-          
-            Added LOG_LEVEL_RECEIVED to log the not-yet-parsed data read from
-            the network. This should make debugging various parsing issues a
-            lot easier.
-          
-        
-        
-          
-            The IPv6 code is enabled by default on Windows versions that
-            support it. Patch submitted by oCameLo in #2942729.
-          
-        
-        
-          
-            In mingw32 versions, the user.filter file is reachable through
-            the GUI, just like default.filter is. Feature request 3040263.
-          
-        
-        
-          
-            Added the configure option --enable-large-file-support to set a
-            few defines that are required by platforms like GNU/Linux to
-            support files larger then 2GB. Mainly interesting for users
-            without proper logfile management.
-          
-        
-        
-          
-            Logging with "debug 16" no longer stops at the first nul byte
-            which is pretty useless. Non-printable characters are replaced
-            with their hex value so the result can't span multiple lines
-            making parsing them harder then necessary.
-          
-        
-        
-          
-            Privoxy logs when reading an action, filter or trust file.
-          
-        
-        
-          
-            Fixed incorrect regression test markup which caused a test in
-            3.0.16 to fail while Privoxy itself was working correctly. While
-            Privoxy accepts hide-referer, too, the action name is actually
-            hide-referrer which is also the name used one the final results
-            page, where the test expected the alias.
-          
-        
-        
-          
-            CGI interface improvements:
-          
-          
-            
-              
-                In finish_http_response(), continue to add the 'Connection:
-                close' header if the client connection will not be kept
-                alive. Anonymously pointed out in #2987454.
-              
-            
-            
-              
-                Apostrophes in block messages no longer cause parse errors
-                when the blocked page is viewed with JavaScript enabled.
-                Reported by dg1727 in #3062296.
-              
-            
-            
-              
-                Fix a bunch of anchors that used underscores instead of
-                dashes.
-              
-            
-            
-              
-                Allow to keep the client connection alive after crunching the
-                previous request. Already opened server connections can be
-                kept alive, too.
-              
-            
-            
-              
-                In cgi_show_url_info(), don't forget to prefix URLs that only
-                contain http:// or https:// in the path. Fixes #2975765
-                reported by Adam Piggott.
-              
-            
-            
-              
-                Show the 404 CGI page if cgi_send_user_manual() is called
-                while local user manual delivery is disabled.
-              
-            
-          
+          The recommended way to upgrade Privoxy is to backup your old configuration
+          files, install the new ones, verify that Privoxy is working correctly and finally merge
+          back your changes using diff and
+          maybe patch.
+
+          There are a number of new features in each Privoxy release and most of them have to be
+          explicitly enabled in the configuration files. Old configuration
+          files obviously don't do that and due to syntax changes using old
+          configuration files with a new Privoxy isn't always possible anyway.
         
+
         
-          
-            Action file improvements:
-          
-          
-            
-              
-                Enable user.filter by default. Suggested by David White in
-                #3001830.
-              
-            
-            
-              
-                Block .sitestat.com/. Reported by johnd16 in #3002725.
-              
-            
-            
-              
-                Block .atemda.com/. Reported by johnd16 in #3002723.
-              
-            
-            
-              
-                Block js.adlink.net/. Reported by johnd16 in #3002720.
-              
-            
-            
-              
-                Block .analytics.yahoo.com/. Reported by johnd16 in #3002713.
-              
-            
-            
-              
-                Block sb.scorecardresearch.com, too. Reported by dg1727 in
-                #2992652.
-              
-            
-            
-              
-                Fix problems noticed on Yahoo mail and news pages.
-              
-            
-            
-              
-                Remove the too broad yahoo section, only keeping the
-                fast-redirects exception as discussed on ijbswa-devel@.
-              
-            
-            
-              
-                Don't block adesklets.sourceforge.net. Reported in #2974204.
-              
-            
-            
-              
-                Block chartbeat ping tracking. Reported in #2975895.
-              
-            
-            
-              
-                Tag CSS and image requests with cautious and medium settings,
-                too.
-              
-            
-            
-              
-                Don't handle view.atdmt.com as image. It's used for
-                click-throughs so users should be able to "go there anyway".
-                Reported by Adam Piggott in #2975927.
-              
-            
-            
-              
-                Also let the refresh-tags filter remove invalid refresh tags
-                where the 'url=' part is missing. Anonymously reported in
-                #2986382. While at it, update the description to mention the
-                fact that only refresh tags with refresh times above 9
-                seconds are covered.
-              
-            
-            
-              
-                javascript needs to be blocked with +handle-as-empty-document
-                to work around Firefox bug 492459. So move .js blockers from
-                +block{Might be a web-bug.} -handle-as-empty-document to
-                +block{Might be a web-bug.} +handle-as-empty-document.
-              
-            
-            
-              
-                ijbswa-Feature Requests-3006719 - Block 160x578 Banners.
-              
-            
-            
-              
-                Block another omniture tracking domain.
-              
-            
-            
-              
-                Added a range-requests tagger.
-              
-            
-            
-              
-                Added two sections to get Flickr's Ajax interface working
-                with default pre-settings. If you change the configuration to
-                block cookies by default, you'll need additional exceptions.
-                Reported by Mathias Homann in #3101419 and by Patrick on
-                ijbswa-users@.
-              
-            
-          
+          Note that some installers remove earlier versions completely,
+          including configuration files, therefore you should really save any
+          important configuration files!
         
+
         
-          
-            Documentation improvements:
-          
-          
-            
-              
-                Explicitly mention how to match all URLs.
-              
-            
-            
-              
-                Consistently recommend socks5 in the Tor FAQ entry and
-                mention its advantage compared to socks4a. Reported by David
-                in #2960129.
-              
-            
-            
-              
-                Slightly improve the explanation of why filtering may appear
-                slower than it is.
-              
-            
-            
-              
-                Grammar fixes for the ACL section.
-              
-            
-            
-              
-                Fixed a link to the 'intercepting' entry and add another one.
-              
-            
-            
-              
-                Rename the 'Other' section to 'Mailing Lists' and reword it
-                to make it clear that nobody is forced to use the trackers
-              
-            
-            
-              
-                Note that 'anonymously' posting on the trackers may not
-                always be possible.
-              
-            
-            
-              
-                Suggest to enable debug 32768 when suspecting parsing
-                problems.
-              
-            
-          
+          On the other hand, other installers don't overwrite existing
+          configuration files, thinking you will want to do that
+          yourself.
         
+
         
-          
-            Privoxy-Log-Parser improvements:
-          
-          
-            
-              
-                Gather statistics for ressources, methods, and HTTP versions
-                used by the client.
-              
-            
-            
-              
-                Also gather statistics for blocked and redirected requests.
-              
-            
-            
-              
-                Provide the percentage of keep-alive offers the client
-                accepted.
-              
-            
-            
-              
-                Add a --url-statistics-threshold option.
-              
-            
-            
-              
-                Add a --host-statistics-threshold option to also gather
-                statistics about how many request where made per host.
-              
-            
-            
-              
-                Fix a bug in handle_loglevel_header() where a 'scan: ' got
-                lost.
-              
-            
-            
-              
-                Add a --shorten-thread-ids option to replace the thread id
-                with a decimal number.
-              
-            
-            
-              
-                Accept and ignore: Looks like we got the last chunk together
-                with the server headers. We better stop reading.
-              
-            
-            
-              
-                Accept and ignore: Continue hack in da house.
-              
-            
-            
-              
-                Accept and higlight: Rejecting connection from 10.0.0.2.
-                Maximum number of connections reached.
-              
-            
-            
-              
-                Accept and highlight: Loading actions file:
-                /usr/local/etc/privoxy/default.action
-              
-            
-            
-              
-                Accept and highlight: Loading filter file:
-                /usr/local/etc/privoxy/default.filter
-              
-            
-            
-              
-                Accept and highlight: Killed all-caps Host header line: HOST:
-                bestproxydb.com
-              
-            
-            
-              
-                Accept and highlight: Reducing expected bytes to 0. Marking
-                the server socket tainted after throwing 4 bytes away.
-              
-            
-            
-              
-                Accept: Merged multiple header lines to: 'X-FORWARDED-PROTO:
-                http X-HOST: 127.0.0.1'
-              
-            
-          
+          standard.action has been merged into
+          the default.action file.
         
+
         
-          
-            Code cleanups:
-          
-          
-            
-              
-                Remove the next member from the client_state struct. Only the
-                main thread needs access to all client states so give it its
-                own struct.
-              
-            
-            
-              
-                Garbage-collect request_contains_null_bytes().
-              
-            
-            
-              
-                Ditch redundant code in unload_configfile().
-              
-            
-            
-              
-                Ditch LogGetURLUnderCursor() which doesn't seem to be used
-                anywhere.
-              
-            
-            
-              
-                In write_socket(), remove the write-only variable write_len
-                in an ifdef __OS2__ block. Spotted by cppcheck.
-              
-            
-            
-              
-                In connect_to(), don't declare the variable 'flags' on OS/2
-                where it isn't used. Spotted by cppcheck.
-              
-            
-            
-              
-                Limit the scope of various variables. Spotted by cppcheck.
-              
-            
-            
-              
-                In add_to_iob(), turn an interestingly looking for loop into
-                a boring while loop.
-              
-            
-            
-              
-                Code cleanup in preparation for external filters.
-              
-            
-            
-              
-                In listen_loop(), mention the socket on which we accepted the
-                connection, not just the source IP address.
-              
-            
-            
-              
-                In write_socket(), also log the socket we're writing to.
-              
-            
-            
-              
-                In log_error(), assert that escaped characters get logged
-                completely or not at all.
-              
-            
-            
-              
-                In log_error(), assert that ival and sval have reasonable
-                values. There's no reason not to abort() if they don't.
-              
-            
-            
-              
-                Remove an incorrect cgi_error_unknown() call in a
-                cannot-happen-situation in send_crunch_response().
-              
-            
-            
-              
-                Clean up white-space in http_response definition and move the
-                crunch_reason to the beginning.
-              
-            
-            
-              
-                Turn http_response.reason into an enum and rename it to
-                http_response.crunch_reason.
-              
-            
-            
-              
-                Silence a 'gcc (Debian 4.3.2-1.1) 4.3.2' warning on i686
-                GNU/Linux.
-              
-            
-            
-              
-                Fix white-space in a log message in
-                remove_chunked_transfer_coding(). While at it, add a note
-                that the message doesn't seem to be entirely correct and
-                should be improved later on.
-              
-            
-          
+          In the default configuration only fatal errors are logged now.
+          You can change that in the debug
+          section of the configuration file. You may also want to enable
+          more verbose logging until you verified that the new Privoxy version is working as expected.
         
+
         
-          
-            GNUmakefile improvements:
-          
-          
-            
-              
-                Use $(SSH) instead of ssh, so one only needs to specify a
-                username once.
-              
-            
-            
-              
-                Removed references to the action feedback thingy that hasn't
-                been working for years.
-              
-            
-            
-              
-                Consistently use shell.sourceforge.net instead of
-                shell.sf.net so one doesn't need to check server fingerprints
-                twice.
-              
-            
-            
-              
-                Removed GNUisms in the webserver and webactions targets so
-                they work with standard tar.
-              
-            
-          
+          Three other config file settings are now off by default:
+          enable-remote-toggle,
+          enable-remote-http-toggle,
+          and enable-edit-actions. If you
+          use or want these, you will need to explicitly enable them, and be
+          aware of the security issues involved.
         
       
-
-      
-        
-          3.1. Note to Upgraders
-        
-        
-          A quick list of things to be aware of before upgrading from earlier
-          versions of Privoxy:
-        
-        
-        
-        
-          
-            
-              The recommended way to upgrade Privoxy is to backup your old
-              configuration files, install the new ones, verify that Privoxy is working correctly and
-              finally merge back your changes using diff and maybe patch.
-            
-            
-              There are a number of new features in each Privoxy release and most of them have to
-              be explicitly enabled in the configuration files. Old
-              configuration files obviously don't do that and due to syntax
-              changes using old configuration files with a new Privoxy isn't always possible anyway.
-            
-          
-          
-            
-              Note that some installers remove earlier versions completely,
-              including configuration files, therefore you should really save
-              any important configuration files!
-            
-          
-          
-            
-              On the other hand, other installers don't overwrite existing
-              configuration files, thinking you will want to do that
-              yourself.
-            
-          
-          
-            
-              standard.action has been merged into
-              the default.action file.
-            
-          
-          
-            
-              In the default configuration only fatal errors are logged now.
-              You can change that in the debug
-              section of the configuration file. You may also want to
-              enable more verbose logging until you verified that the new
-              Privoxy version is working as
-              expected.
-            
-          
-          
-            
-              Three other config file settings are now off by default: enable-remote-toggle, enable-remote-http-toggle,
-              and enable-edit-actions. If
-              you use or want these, you will need to explicitly enable them,
-              and be aware of the security issues involved.
-            
-          
-        
-      
-    
-    
-      
-      
-        
-          
-          
-          
-        
-        
-          
-          
-          
-        
-      
-            Prev
-          
-            Home
-          
-            Next
-          

-            Installation
-          
-             
-          
-            Quickstart to Using Privoxy
-          
     
-  
-
+  
+
+  
+    
+
+    
+      
+        
+
+        
 
+        
+      
+
+      
+        
+
+        
+
+        
+      
+    Prev Home Next
Installation   Quickstart to Using
+        Privoxy
+  
+
+
-- 
2.39.2

- 4. Coding Guidelines -

- 4.1. Introduction -

- 4.2. Using Comments -

- 4.2.1. Comment, Comment, Comment -

- 4.2.2. Use blocks for comments -

- 4.2.3. Keep Comments on their own line -

- 4.2.4. Comment each logical step -

- 4.2.5. Comment All Functions Thoroughly -

- 4.2.6. Comment at the end of braces if the content - is more than one screen length -

- 4.3. Naming Conventions -

- 4.3.1. Variable Names -

- 4.3.2. Function Names -

- 4.3.3. Header file prototypes -

- 4.3.4. Enumerations, and #defines -

- 4.3.5. Constants -

- 4.4. Using Space -

- 4.4.1. Put braces on a line by themselves. -

- 4.4.2. ALL control statements should have a - block -

- 4.4.3. Do not belabor/blow-up boolean - expressions -

- 4.4.4. Use white space freely because it is - free -

- 4.4.5. Don't use white space around structure - operators -

- 4.4.6. Make the last brace of a function stand - out -

- 4.4.7. Use 3 character indentions -

- 4.5. Initializing -

- 4.5.1. Initialize all variables -

- 4.6. Functions -

- 4.6.1. Name functions that return a boolean as a - question. -

- 4.6.2. Always specify a return type for a - function. -

- 4.6.3. Minimize function calls when iterating by - using variables -

- 4.6.4. Pass and Return by Const Reference -

- 4.6.5. Pass and Return by Value -

- 4.6.6. Names of include files -

- 4.6.7. Provide multiple inclusion protection -

- 4.6.8. Use `extern "C"` when appropriate -

- 4.6.9. Where Possible, Use Forward Struct - Declaration Instead of Includes -

- 4.7. General Coding Practices -

- 4.7.1. Turn on warnings -

- 4.7.2. Provide a default case for all switch - statements -

- 4.7.3. Try to avoid falling through cases in a - switch statement. -

- 4.7.4. Use 'long' or 'short' Instead of 'int' -

- 4.7.5. Don't mix size_t and other types -

- 4.7.6. Declare each variable and struct on its own - line. -

- 4.7.7. Use malloc/zalloc sparingly -

- 4.7.8. The Programmer Who Uses 'malloc' is - Responsible for Ensuring 'free' -

- 4.7.9. Add loaders to the `file_list' structure and - in order -

- 4.7.10. "Uncertain" new code and/or changes to - existing code, use FIXME or XXX -

- 4.8. Addendum: Template for files and function - comment blocks: -

- 8. Contacting the developers, Bug Reporting and - Feature Requests -

- 8.1. Get Support -

- 8.2. Reporting Problems -

- 8.2.1. Reporting Ads or Other Configuration - Problems -

- 8.2.2. Reporting Bugs -

- 8.3. Request New Features -

- 8.4. Mailing Lists -

- 9. Privoxy Copyright, License and History -

- 9.1. License -

- 9.2. History -

- 2. The CVS Repository -

- 2.1. Access to CVS -

- 2.2. Branches -

- 2.3. CVS Commit Guidelines -

- 3. Documentation Guidelines -

- 3.1. Quickstart to Docbook and SGML -

- 3.2. Privoxy - Documentation Style -

- 3.3. Privoxy Custom Entities -

- Privoxy Developer Manual -

- 1. Introduction -

- 1.1. Quickstart to Privoxy Development -

- 6. Releasing a New Version -

- 6.1. Version numbers -

- 6.2. Before the Release: Freeze -

- 6.3. Building and Releasing the Packages -

- 6.3.1. Note on Privoxy Packaging -

- 6.3.2. Source Tarball -

- 6.3.3. SuSE, Conectiva or Red Hat - RPM -