--- /dev/null
+privoxy (2.9.13-beta-1) unstable; urgency=low
+
+ * Initial Release.
+
+ -- Roland Rosenfeld <roland@debian.org> Fri, 29 Mar 2002 11:52:03 +0100
+
--- /dev/null
+Source: privoxy
+Section: web
+Priority: optional
+Maintainer: Roland Rosenfeld <roland@debian.org>
+Build-Depends: debhelper (>> 3.0.0), autoconf, libpcre3-dev
+Standards-Version: 3.5.6
+
+Package: privoxy
+Architecture: any
+Depends: ${shlibs:Depends}, logrotate, adduser
+Description: Privacy enhancing HTTP Proxy
+ Privoxy is an instrumentable HTTP proxy that filters the HTTP data
+ stream between web servers and browsers. Privoxy can be used to
+ protect privacy, manage cookies, filter web page content, manage
+ access restrictions, and to discard such annoying Internet junk as
+ ads, banners, and pop-ups. Or whatever other annoyances strike your
+ fancy.
+ .
+ Privoxy is a derivate of junkbuster, but it uses a different name
+ space and a different port (8118), so junkbuster and privoxy can
+ coexist on one system.
--- /dev/null
+This package was debianized by Roland Rosenfeld <roland@debian.org> on
+Fri, 29 Mar 2002 11:52:03 +0100.
+
+It was downloaded from http://privoxy.org/ and
+http://sourceforge.net/project/showfiles.php?group_id=11118
+
+Upstream Authors: ijbswa-developers@lists.sourceforge.net
+
+Current Project developers:
+
+ Stefan Waldherr
+ Andreas Oesterhelt
+ Jon Foster
+
+ Markus Breitenbach
+ Thomas Steudten
+
+Originally developed by:
+
+ Junkbusters Corp.
+ Anonymous Coders
+
+Copyright: Written by and Copyright (C) 2001 the SourceForge
+ Privoxy team. http://ijbswa.sourceforge.net
+
+ Based on the Internet Junkbuster originally written
+ by and Copyright (C) 1997 Anonymous Coders and
+ Junkbusters Corporation. http://www.junkbusters.com
+
+ This program is free software; you can redistribute it
+ and/or modify it under the terms of the GNU General
+ Public License as published by the Free Software
+ Foundation; either version 2 of the License, or (at
+ your option) any later version.
+
+ This program is distributed in the hope that it will
+ be useful, but WITHOUT ANY WARRANTY; without even the
+ implied warranty of MERCHANTABILITY or FITNESS FOR A
+ PARTICULAR PURPOSE. See the GNU General Public
+ License for more details.
+
+ The GNU General Public License should be included with
+ this file. If not, you can view it at
+ http://www.gnu.org/copyleft/gpl.html
+ or write to the Free Software Foundation, Inc., 59
+ Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+The complete GNU General Public License can be found at
+/usr/share/common-licenses/GPL
--- /dev/null
+etc/privoxy
+usr/sbin
+usr/share/doc/privoxy
+var/log/privoxy
--- /dev/null
+Document: privoxy-developer
+Title: Privoxy Developer Manual
+Author: Privoxy Developers
+Abstract: The provoxy developer manual gives the users information on
+ how to help the developer team. It provides guidance on coding,
+ testing, documentation and other issues. Privoxy is a filtering web
+ proxy.
+Section: Apps/Net
+
+Format: HTML
+Index: /usr/share/doc/privoxy/developer-manual/index.html
+Files: /usr/share/doc/privoxy/developer-manual/*.html
--- /dev/null
+Document: privoxy-faq
+Title: Privoxy Frequently Asked Questions
+Author: Privoxy Developers
+Abstract: The FAQ document gives users and developers alike answers to
+ frequently asked questions about Privoxy. Privoxy is a filtering web
+ proxy.
+Section: Apps/Net
+
+Format: HTML
+Index: /usr/share/doc/privoxy/faq/index.html
+Files: /usr/share/doc/privoxy/faq/*.html
--- /dev/null
+Document: privoxy-user
+Title: Privoxy User Manual
+Author: Privoxy Developers
+Abstract: The user manual gives users information on how to install,
+ configure and use Privoxy. Privoxy is a filtering web proxy.
+Section: Apps/Net
+
+Format: HTML
+Index: /usr/share/doc/privoxy/user-manual/index.html
+Files: /usr/share/doc/privoxy/user-manual/*.html
--- /dev/null
+README
+AUTHORS
+doc/text/faq.txt
+doc/text/user-manual.txt
+doc/text/developer-manual.txt
+
--- /dev/null
+#! /bin/sh
+
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+DAEMON=/usr/sbin/privoxy
+NAME=privoxy
+DESC="filtering proxy server"
+OWNER=privoxy
+CONFIGFILE=/etc/privoxy/config
+PIDFILE=/var/run/$NAME.pid
+
+test -f $DAEMON || exit 0
+
+set -e
+
+case "$1" in
+ start)
+ echo -n "Starting $DESC: "
+ $DAEMON --pidfile $PIDFILE --user $OWNER $CONFIGFILE 2>/dev/null
+ echo "$NAME."
+ ;;
+ stop)
+ echo -n "Stopping $DESC: "
+ start-stop-daemon --oknodo --stop --quiet --pidfile $PIDFILE \
+ --exec $DAEMON
+ echo "$NAME."
+ ;;
+ #reload)
+ #
+ # If the daemon can reload its config files on the fly
+ # for example by sending it SIGHUP, do it here.
+ #
+ # If the daemon responds to changes in its config file
+ # directly anyway, make this a do-nothing entry.
+ #
+ # echo "Reloading $DESC configuration files."
+ # start-stop-daemon --stop --signal 1 --quiet --pidfile \
+ # /var/run/$NAME.pid --exec $DAEMON
+ #;;
+ restart|force-reload)
+ #
+ # If the "reload" option is implemented, move the "force-reload"
+ # option to the "reload" entry above. If not, "force-reload" is
+ # just the same as "restart".
+ #
+ echo "Restarting $DESC: "
+ start-stop-daemon --oknodo --stop --quiet --pidfile $PIDFILE \
+ --exec $DAEMON
+ sleep 1
+ $DAEMON --pidfile $PIDFILE --user $OWNER $CONFIGFILE
+ ;;
+ *)
+ N=/etc/init.d/$NAME
+ # echo "Usage: $N {start|stop|restart|reload|force-reload}" >&2
+ echo "Usage: $N {start|stop|restart|force-reload}" >&2
+ exit 1
+ ;;
+esac
+
+exit 0
--- /dev/null
+/var/log/privoxy/logfile {
+ create 0640 privoxy adm
+ missingok
+ weekly
+ rotate 7
+ compress
+ postrotate
+ touch /etc/privoxy/config
+ endscript
+}
+
+/var/log/privoxy/jarfile {
+ create 0640 privoxy adm
+ missingok
+ weekly
+ rotate 7
+ compress
+ postrotate
+ touch /etc/privoxy/config
+ endscript
+}
--- /dev/null
+#! /bin/sh
+# postinst script for privoxy
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+# * <postinst> `configure' <most-recently-configured-version>
+# * <old-postinst> `abort-upgrade' <new version>
+# * <conflictor's-postinst> `abort-remove' `in-favour' <package>
+# <new-version>
+# * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
+# <failed-install-package> <version> `removing'
+# <conflicting-package> <version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+#
+# quoting from the policy:
+# Any necessary prompting should almost always be confined to the
+# post-installation script, and should be protected with a conditional
+# so that unnecessary prompting doesn't happen if a package's
+# installation fails and the `postinst' is called with `abort-upgrade',
+# `abort-remove' or `abort-deconfigure'.
+
+case "$1" in
+ configure)
+ if ! grep -q '^privoxy:' /etc/passwd
+ then
+ adduser --system --home /etc/privoxy --ingroup nogroup \
+ --disabled-password privoxy >/dev/null
+ fi
+ chown -R privoxy.adm /var/log/privoxy
+ chmod 750 /var/log/privoxy
+ ;;
+
+ abort-upgrade|abort-remove|abort-deconfigure)
+
+ ;;
+
+ *)
+ echo "postinst called with unknown argument \`$1'" >&2
+ exit 1
+ ;;
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
+
+
--- /dev/null
+#! /bin/sh
+# postrm script for privoxy
+#
+# see: dh_installdeb(1)
+
+set -e
+
+# summary of how this script can be called:
+# * <postrm> `remove'
+# * <postrm> `purge'
+# * <old-postrm> `upgrade' <new-version>
+# * <new-postrm> `failed-upgrade' <old-version>
+# * <new-postrm> `abort-install'
+# * <new-postrm> `abort-install' <old-version>
+# * <new-postrm> `abort-upgrade' <old-version>
+# * <disappearer's-postrm> `disappear' <r>overwrit>r> <new-version>
+# for details, see http://www.debian.org/doc/debian-policy/ or
+# the debian-policy package
+
+
+case "$1" in
+ purge)
+ echo "Removing user privoxy"
+ userdel privoxy || echo "WARNING: Problem removing user privoxy."
+
+ echo "Deleting privoxy log files"
+ rm -rf /var/log/privoxy
+ ;;
+
+ remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
+ ;;
+
+ *)
+ echo "postrm called with unknown argument \`$1'" >&2
+ exit 1
+
+esac
+
+# dh_installdeb will replace this with shell code automatically
+# generated by other debhelper scripts.
+
+#DEBHELPER#
+
+exit 0
--- /dev/null
+#!/usr/bin/make -f
+# Sample debian/rules that uses debhelper.
+# GNU copyright 1997 to 1999 by Joey Hess.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+# This is the debhelper compatibility version to use.
+export DH_COMPAT=3
+
+# These are used for cross-compiling and for saving the configure script
+# from having to guess our platform (since we know it already)
+DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+
+DEBDIR=`pwd`/debian/privoxy
+
+CFLAGS="-O2"
+WITHDEBUG=""
+ifneq (,$(findstring debug,$(DEB_BUILD_OPTIONS)))
+ CFLAGS += -g
+ WITHDEBUG="--with-debug"
+endif
+
+configure: configure-stamp
+configure-stamp:
+ dh_testdir
+
+ autoheader
+ autoconf
+ env CFLAGS=$(CFLAGS) \
+ ./configure --prefix=/usr --sysconfdir=/etc \
+ --mandir=/usr/share/man --with-docbook=no \
+ $(WITHDEBUG)
+
+ touch configure-stamp
+
+build: build-stamp
+
+build-stamp: configure-stamp
+ dh_testdir
+
+ $(MAKE)
+
+ touch build-stamp
+
+clean:
+ dh_testdir
+ dh_testroot
+ rm -f build-stamp configure-stamp
+
+ -$(MAKE) clean
+ rm -f privoxy
+ rm -f configure config.h config.h.in config.log config.cache \
+ config.status GNUmakefile
+
+ dh_clean
+
+install: build
+ dh_testdir
+ dh_testroot
+ dh_clean -k
+ dh_installdirs
+
+ install -m 0755 privoxy $(DEBDIR)/usr/sbin/privoxy
+
+ sed -e 's/^\(\(trust\|proxy\)-info-url\|admin-address\)/#\1/' \
+ -e 's#^confdir \.#confdir /etc/privoxy#' \
+ -e 's#^logdir \.#logdir /var/log/privoxy#' \
+ < config > $(DEBDIR)/etc/privoxy/config
+ install -m 0644 default.action $(DEBDIR)/etc/privoxy/default.action
+ install -m 0644 default.filter $(DEBDIR)/etc/privoxy/default.filter
+ install -m 0644 trust $(DEBDIR)/etc/privoxy/trust
+
+ cp -r templates $(DEBDIR)/etc/privoxy/
+ rm -f $(DEBDIR)/etc/privoxy/templates/*~
+ rm -rf $(DEBDIR)/etc/privoxy/templates/CVS
+
+ cp -r doc/webserver/user-manual $(DEBDIR)/usr/share/doc/privoxy/
+ cp -r doc/webserver/faq $(DEBDIR)/usr/share/doc/privoxy/
+ cp -r doc/webserver/developer-manual $(DEBDIR)/usr/share/doc/privoxy/
+
+
+# Build architecture-independent files here.
+binary-indep: build install
+# We have nothing to do by default.
+
+# Build architecture-dependent files here.
+binary-arch: build install
+ dh_testdir
+ dh_testroot
+# dh_installdebconf
+ dh_installdocs
+ dh_installexamples
+ dh_installmenu
+ dh_installlogrotate
+# dh_installemacsen
+# dh_installpam
+# dh_installmime
+ dh_installinit
+ dh_installcron
+ dh_installman
+ dh_installinfo
+# dh_undocumented
+ dh_installchangelogs ChangeLog
+ dh_link
+ dh_strip
+ dh_compress
+ dh_fixperms
+# dh_makeshlibs
+ dh_installdeb
+# dh_perl
+ dh_shlibdeps
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install configure
projects / privoxy.git / commitdiff