| Privoxy 3.0.18 User Manual | +Privoxy 3.0.21 User Manual | ||||
|---|---|---|---|---|---|
Privoxy 3.0.18 is a stable release. - The changes since 3.0.17 stable are:
+Privoxy 3.0.20 is a beta release. The + changes since 3.0.19 stable are:
Fix a logic bug that could cause Privoxy to reuse a server - socket after it got tainted by a server-header-tagger-induced - block that was triggered before the whole server response had - been read. If keep-alive was enabled and the request following - the blocked one was to the same host and using the same - forwarding settings, Privoxy would send it on the tainted server - socket. While the server would simply treat it as a pipelined - request, Privoxy would later on fail to properly parse the - server's response as it would try to parse the unread data from - the first response as server headers for the second one. - Regression introduced in 3.0.17.
+Client sockets are now properly shutdown and drained before + being closed. This fixes page truncation issues with clients that + aggressively pipeline data on platforms that otherwise discard + already written data. The issue mainly affected Opera users and + was initially reported by Kevin in #3464439, szotsaki provided + additional information to track down the cause.
When implying keep-alive in client_connection(), remember that - the client didn't. Fixes a regression introduced in 3.0.13 that - would cause Privoxy to wait for additional client requests after - receiving a HTTP/1.1 request with "Connection: close" set and - connection sharing enabled. With clients which terminates the - client connection after detecting that the whole body has been - received it doesn't really matter, but with clients that don't - the connection would be kept open until it timed out.
+Fix latency calculation for shared connections (disabled by + default). It was broken since their introduction in 2009. The + calculated latency for most connections would be 0 in which case + the timeout detection failed to account for the real latency.
Fix a subtle race condition between - prepare_csp_for_next_request() and sweep() A thread preparing - itself for the next client request could briefly appear to be - inactive. If all other threads were already using more recent - files, the thread could get its files swept away under its feet. - So far this has only been reproduced while stress testing in - valgrind while touching action files in a loop. It's unlikely to - have caused any actual problems in the real world.
+Reject URLs with invalid port. Previously they were parsed + incorrectly and characters between the port number and the first + slash were silently dropped as shown by curl test 187.
Disable filters if SDCH compression is used unless filtering - is forced. If SDCH was combined with a supported compression - algorithm, Privoxy previously could try to decompress it and - ditch the Content-Encoding header even though the SDCH - compression wasn't dealt with. Reported by zebul666 in - #3225863.
+The default-server-timeout and socket-timeout directives + accept 0 as valid value.
Make a copy of the --user value and only mess with that when - splitting user and group. On some operating systems modifying the - value directly is reflected in the output of ps and friends and - can be misleading. Reported by zepard in #3292710.
+Fix a race condition on Windows that could cause Privoxy to + become unresponsive after toggling it on or off through the + taskbar icon. Reported by Tim H. in #3525694.
If forwarded-connect-retries is set, only retry if Privoxy is - actually forwarding the request. Previously direct connections - would be retried as well.
+Fix the compilation on Windows when configured without IPv6 + support.
Fixed a small memory leak when retrying connections with IPv6 - support enabled.
+Fix an assertion that could cause debug builds to abort() in + case of socks5 connection failures with "debug 2" enabled.
Remove an incorrect assertion in - compile_dynamic_pcrs_job_list() It could be triggered by a pcrs - job with an invalid pcre pattern (for example one that contains a - lone quantifier).
+Fix an assertion that could cause debug builds to abort() if a + filter contained nul bytes in the replacement text.
If the --user argument user[.group] contains a dot, always - bail out if no group has been specified. Previously the intended, - but undocumented (and apparently untested), behaviour was to try - interpreting the whole argument as user name, but the detection - was flawed and checked for '0' instead of '\0', thus merely - preventing group names beginning with a zero.
-General improvements:
+In html_code_map[], use a numeric character reference instead - of ' which wasn't standardized before XHTML 1.0.
+Significantly improved keep-alive support for both client and + server connections.
Fix an invalid free when compiled with - FEATURE_GRACEFUL_TERMINATION and shut down through - http://config.privoxy.org/die
+New debug log level 65536 which logs all actions that were + applied to the request.
In get_actions(), fix the "temporary" backwards compatibility - hack to accept block actions without reason. It also covered - other actions that should be rejected as invalid. Reported by - Billy Crook.
+New directive client-header-order to forward client headers in + a different order than the one in which they arrived.
General improvements:
- -Privoxy can (re)compress buffered content before delivering it - to the client. Disabled by default as most users wouldn't benefit - from it.
+New directive tolerate-pipelining to allow client-side + pipelining. If enabled (3.0.20 beta enables it by default), + Privoxy will keep pipelined client requests around to deal with + them once the current request has been served.
The +fast-redirects{check-decoded-url} action checks URL - segments separately. If there are other parameters behind the - redirect URL, this makes it unnecessary to cut them off by - additionally using a +redirect{} pcrs command. Initial patch - submitted by Jamie Zawinski in #3429848.
+New --config-test option to let Privoxy exit after checking + whether or not the configuration seems valid. The limitations + noted in TODO #22 and #23 still apply. Based on a patch by + Ramkumar Chinchani.
When loading action sections, verify that the referenced - filters exist. Currently missing filters only result in an error - message, but eventually the severity will be upgraded to - fatal.
+New limit-cookie-lifetime{} action to let cookies expire + before the end of the session. Suggested by Rick Sykes in + #1049575.
Allow to bind to multiple separate addresses. Patch set - submitted by Petr Pisar in #3354485.
+Increase the hard-coded maximum number of actions and filter + files from 10 to 30 (each). It doesn't significantly affect + Privoxy's memory usage and recompiling wasn't an option for all + Privoxy users that reached the limit.
Set socket_error to errno if connecting fails in - rfc2553_connect_to() Previously rejected direct connections could - be incorrectly reported as DNS issues if Privoxy was compiled - with IPv6 support.
+Add support for chunk-encoded client request bodies. + Previously chunk-encoded request bodies weren't guaranteed to be + forwarded correctly, so this can also be considered a bug fix + although chunk-encoded request bodies aren't commonly used in the + real world.
Adjust url_code_map[] so spaces are replaced with %20 instead - of '+' While '+' can be used by client's submitting form data, - this is not actually what Privoxy is using the lookups for. This - is more of a cosmetic issue and doesn't fix any known - problems.
+Add support for Tor's optimistic-data SOCKS extension, which + can reduce the latency for requests on newly created connections. + Currently only the headers are sent optimistically and only if + the client request has already been read completely which rules + out requests with large bodies.
When compiled without FEATURE_FAST_REDIRECTS, do not silently - ignore +fast-redirect{} directives
+After preventing the client from pipelining, don't signal + keep-alive intentions. When looking at the response headers + alone, it previously wasn't obvious from the client's perspective + that no additional responses should be expected.
Added a workaround for GNU libc's strptime() reporting - negative year values when the parsed year is only specified with - two digits. On affected systems cookies with such a date would - not be turned into session cookies by the +session-cookies-only - action. Reported by Vaeinoe in #3403560
+Stop considering client sockets tainted after receiving a + request with body. It hasn't been necessary for a while now and + unnecessarily causes test failures when using curl's test + suite.
Fixed bind failures with certain GNU libc versions if no - non-loopback IP address has been configured on the system. This - is mainly an issue if the system is using DHCP and Privoxy is - started before the network is completely configured. Reported by - Raphael Marichez in #3349356. Additional insight from Petr - Pisar.
+Allow HTTP/1.0 clients to signal interest in keep-alive + through the Proxy-Connection header. While such client are rare + in the real world, it doesn't hurt and couple of curl tests rely + on it.
Privoxy log messages now use the ISO 8601 date format - %Y-%m-%d. It's only slightly longer than the old format, but - contains the full date including the year and allows sorting by - date (when grepping in multiple log files) without hassle.
+Only remove duplicated Content-Type headers when filters are + enabled. If they are not it doesn't cause ill effects and the + user might not want it. Downgrade the removal message to + LOG_LEVEL_HEADER to clarify that it's not an error in Privoxy and + is unlikely to cause any problems in general. Anonymously + reported in #3599335.
In get_last_url(), do not bother trying to decode URLs that do - not contain at least one '%' sign. It reduces the log noise and a - number of unnecessary memory allocations.
+Set the socket option SO_LINGER for the client socket.
In case of SOCKS5 failures, dump the socks response in the log - message.
+Move several variable declarations to the beginning of their + code block. It's required when compiling with gcc 2.95 which is + still used on some platforms. Initial patch submitted by Simon + South in #3564815.
Simplify the signal setup in main()
+Optionally try to sanity-check strptime() results before + trusting them. Broken strptime() implementations have caused + problems in the past and the most recent offender seems to be + FreeBSD's libc (standards/173421).
Streamline socks5_connect() slightly
+When filtering is enabled, let Range headers pass if the range + starts at the beginning. This should work around (or at least + reduce) the video playback issues with various Apple clients as + reported by Duc in #3426305.
In socks5_connect(), require a complete socks response from - the server Previously Privoxy didn't care how much data the - server response contained as long as the first two bytes - contained the expected values. While at it, shrink the buffer - size so Privoxy can't read more than a whole socks response.
+Do not confuse a client hanging up with a connection time out. + If a client closes its side of the connection without sending a + request line, do not send the CLIENT_CONNECTION_TIMEOUT_RESPONSE, + but report the condition properly.
In chat(), do not bother to generate a client request in case - of direct CONNECT requests. It will not be used anyway.
+Allow closing curly braces as part of action values as long as + they are escaped.
Reduce server_last_modified()'s stack size.
+On Windows, the logfile is now written before showing the GUI + error message which blocks until the user acknowledges it. + Reported by Adriaan in #3593603.
Shorten get_http_time() by using strftime().
+Remove an unreasonable parameter limit in the CGI interface. + The new parameter limit depends on the memory available and is + currently unlikely to be reachable, due to other limits in both + Privoxy and common clients. Reported by Andrew on + ijbswa-users@.
Constify the known_http_methods pointers in - unknown_method().
+Decrease the chances of parse failures after requests with + unsupported methods were sent to the CGI interface.
Action file improvements:
+Constify the time_formats pointers in parse_header_time().
+Remove the comment that indicated that updated default.action + versions are released on their own.
Constify the formerly_valid_actions pointers in - action_used_to_be_valid().
+Block 'optimize.indieclick.com/' and + 'optimized-by.rubiconproject.com/'
Introduce a GNUMakefile MAN_PAGE variable that defaults to - privoxy.1. The Debian package uses section 8 for the man page and - this should simplify the patch.
+Unblock 'adjamblog.wordpress.com/' and + 'adjamblog.files.wordpress.com/'. Reported by Ryan Farmer in + #3496116.
Deduplicate the INADDR_NONE definition for Solaris by moving - it to jbsockets.h
+Unblock '/.*Bugtracker'. Reported by pwhk in #3522341.
In block_url(), ditch the obsolete workaround for ancient - Netscape versions that supposedly couldn't properly deal with - status code 403.
+Add test URLs for '.freebsd.org' and '.watson.org'.
Remove a useless NULL pointer check in load_trustfile().
+Unblock '.urbandictionary.com/popular'.
Remove two useless NULL pointer checks in - load_one_re_filterfile().
+Block '.adnxs.com/'.
Change url_code_map[] from an array of pointers to an array of - arrays It removes an unnecessary layer of indirection and on - 64bit system reduces the size of the binary a bit.
+Block 'farm.plista.com/widgetdata.php'.
Fix various typos. Fixes taken from Debian's 29_typos.dpatch - by Roland Rosenfeld.
+Block 'rotation.linuxnewmedia.com/'.
Add a dok-tidy GNUMakefile target to clean up the messy HTML - generated by the other dok targets.
+Block 'reklamy.sfd.pl/'. Reported by kacperdominik in + #3399948.
GNUisms in the GNUMakefile have been removed.
+Block 'g.adspeed.net/'.
Change the HTTP version in static responses to 1.1
+Unblock 'websupport.wdc.com/'. Reported by Adam Piggot in + #3577851.
Synced config.sub and config.guess with upstream - 2011-11-11/386c7218162c145f5f9e1ff7f558a3fbb66c37c5.
+Block '/openx/www/delivery/'.
Add a dedicated function to parse the values of toggles. - Reduces duplicated code in load_config() and provides better - error handling. Invalid or missing toggle values are now a fatal - error instead of being silently ignored.
+Disable fast-redirects for '.googleapis.com/'.
Terminate HTML lines in static error messages with \n instead - of \r\n.
+Block 'imp.double.net/'. Reported by David Bo in #3070411.
Simplify cgi_error_unknown() a bit.
+Block 'gm-link.com/' which is used for email tracking. + Reported by David Bo in #1812733.
In LogPutString(), don't bother looking at pszText when not - actually logging anything.
+Verify that requests to "bwp." are blocked. URL taken from + #1736879 submitted by Francois Marier.
Change ssplit()'s fourth parameter from int to size_t. Fixes a - clang complaint.
+Block '/.*bannerid='. Reported by Adam Piggott in + #2975779.
Add a warning that the statistics currently can't be trusted. - Mention Privoxy-Log-Parser's --statistics option as an - alternative for the time being.
+Block 'cltomedia.info/delivery/' and '.adexprt.com/'. + Anonymously reported in #2965254.
In rfc2553_connect_to(), start setting cgi->error_message - on error
+Block 'de17a.com/'. Reported by David Bo in #3061472.
Change the expected status code returned for http://p.p/die - depending on whether or not FEATURE_GRACEFUL_TERMINATION is - available.
+Block 'oskar.tradera.com/'. Reported by David Bo in + #3060596.
In cgi_die(), mark the client connection for closing. If the - client will fetch the style sheet through another connection it - gets the main thread out of the accept() state and should thus - trigger the actual shutdown.
+Block '/scripts/webtrends\.js'. Reported by johnd16 in + #3002729.
Add a proper CGI message for cgi_die().
+Block requests for 'pool.*.adhese.com/'. Reported by johnd16 + in #3002716.
Don't enforce a logical line length limit in - read_config_line()
+Update path pattern for Coremetrics and add tests. Pattern and + URLs submitted by Adam Piggott #3168443.
Slightly refactor server_last_modified() to remove useless - gmtime*() calls
+Enable +fast-redirects{check-decoded-url} for 'tr.anp.se/'. + Reported by David Bo in #3268832.
In get_content_type(), also recognize '.jpeg' as JPEG - extension
+Unblock '.conrad.se/newsletter/banners/'. Reported by David Bo + in #3413824.
Add '.png' to the list of recognized file extenstions in - get_content_type()
+Block '.tynt.com/'. Reported by Dan Stahlke in #3421767.
In block_url(), consistently use the block reason "Request - blocked by Privoxy" In two places the reason was "Request for - blocked URL" which hides the fact that the request got blocked by - Privoxy and isn't necessarily correct as the block may be due to - tags.
+Unblock '.bbci.co.uk/radio/'. Reported by Adam Piggott in + #3569603.
In listen_loop(), reload the configuration files after - accepting a new connection instead of before. Previously the - first connection that arrived after a configuration change would - still be handled with the old configuration.
+Block requests to 'service.maxymiser.net/'. Reported by + johnd16 in #3118401 (with a previous URL).
In chat()'s receive-data loop, skip a client socket check if - the socket will be written to right away anyway. This can - increase the transfer speed for unfiltered content on fast - network connections.
+Disable fast-redirects for Google's "let's pretend your + computer is infected" page.
The socket timeout is used for SOCKS negotiations as well - which previously couldn't timeout.
+Unblock '/.*download' to resolve actionsfile feedback + #3498129. Submitted by Steven Kolins (soundcloud.com not + working).
Don't keep the client connection alive if any configuration - file changed since the time the connection came in. This is - closer to Privoxy's behaviour before keep-alive support for - client connection has been added and also less confusing in - general.
+Unblock '.wlxrs.com/' which is required by hotmail.com. Fixes + #3413827 submitted by David Bo.
Treat all Content-Type header values containing the pattern - 'script' as a sign of text. Reported by pribog in #3134970.
+Add two unblock patterns for popup radio and TV players. + Submitted by Adam Piggott in #3596089.
Action file improvements:
+Filter file improvements & bug fixes:
Moved the site-specific block pattern section below the one - for the generic patterns so for requests that are matched in - both, the block reason for the domain is shown which is usually - more useful than showing the one for the generic pattern.
+Add a referer tagger.
Remove -prevent-compression from the fragile alias It's no - longer used anywhere by default and isn't known to break stuff - anyway.
+Reduce the likelihood that the google filter messes up + HTML-generating JavaScript. Reported by Zeno Kugy in + #3520260.
Add a (disabled) section to block various Facebook tracking - URLs Reported by Dan Stahlke in #3421764.
-Documentation improvements:
+Add a (disabled) section to rewrite and redirect - click-tracking URLs used on news.google.com Reported by Dan - Stahlke in #3421755.
+Revised all OS X sections due to new packaging module + (OSXPackageBuilder).
Unblock linuxcounter.net/ Reported by Dan Stahlke in - #3422612.
+Update the list of supported operating systems to clarify that + all Windows versions after 95 are expected to work and note that + the platform-specific code for AmigaOS and QNX currently isn't + maintained.
Block 'www91.intel.com/' which is used by Omniture. Reported - by Adam Piggott in #3167370.
+Update 'Signals' section, the only explicitly handled signals + are SIGINT, SIGTERM and SIGHUP.
Disable the handle-as-empty-doc-returns-ok option and mark it - as deprecated. Reminded by tceverling in #2790091.
+Add Haiku to the list of operating systems on which Privoxy is + known to run.
Add ".ivwbox.de/" to the "Cross-site user tracking" section. - Reported by Nettozahler in #3172525.
+Add DragonFly to the list of BSDs on which Privoxy is known to + run.
Unblock and fast-redirect ".awin1.com/.*=http://" Reported by - Adam Piggott in #3170921.
+Removed references to redhat-specific documentation set since + it no longer exists.
Block "b.collective-media.net/".
+Removed references to building PDFs since we no longer do + so.
Widen the Debian popcon exception to "qa.debian.org/popcon". - Seen in Debian's 05_default_action.dpatch by Roland - Rosenfeld.
+Multiple listen-address directives are supported since 3.0.18, + correct the documentation to say so.
Block ".gemius.pl/" which only seems to be used for user - tracking. Reported by johnd16 in #3002731. Additional input from - Lee and movax.
+Remove bogus section about long and short being preferable to + int.
Disable banners-by-size filters for '.thinkgeek.com/' The - filter only seems to catch pictures of the inventory.
+Corrected some Internet JunkBuster references to Privoxy.
Block requests for 'go.idmnet.bbelements.com/please/showit/' - Reported by kacperdominik in #3372959.
+Removed references to www.junkbusters.com since it is no + longer maintained. Reported by Angelina Matson.
Unblock adainitiative.org/
+Various grammar and spelling corrections
Add a fast-redirects exception for - '.googleusercontent.com/.*=cache'
+Add a client-header-tagger{} example for disabling filtering + for range requests.
Add a fast-redirects exception for - webcache.googleusercontent.com/
+Correct a URL in the "Privoxy with Tor" FAQ.
Unblock http://adassier.wordpress.com/ and - http://adassier.files.wordpress.com/
+Spell 'refresh-tags' correctly. Reported by Don in + #3571927.
Filter file improvements:
-Let the yahoo filter hide '.ads'
+Sort manpage options alphabetically.
Let the msn filter hide overlay ads for Facebook 'likes' in - search results and elements with the id 's_notf_div'. They only - seem to be used to advertise site 'enhancements'.
+Remove an incorrect sentence in the toggle section. The toggle + state doesn't affect whether or not the Windows version uses the + tray icon. Reported by Zeno Kugy in #3596395.
Let the js-events filter additionally disarm setInterval() - Suggested by dg1727 in #3423775.
+Add new contributors since 3.0.19.
Documentation improvements:
+Log message improvements:
Clarify the effect of compiling Privoxy with zlib support - Suggested by dg1727 in #3423782.
+When stopping to watch a client socket due to pipelining, + additionally log the socket number.
Point out that the SourceForge messaging system works like a - black hole and should thus not be used to contact individual - developers.
+Log the client socket and its condition before closing it. + This makes it more obvious that the socket actually gets closed + and should help when diagnosing problems like #3464439.
Mention some of the problems one can experience when not - explicitly configuring an IP addresses as listen address.
+In case of SOCKS5 failures, do not explicitly log the server's + response. It hasn't helped so far and the response can already be + logged by enabling "debug 32768" anyway. This reverts v1.81 and + the follow-up bug fix v1.84.
Explicitly mention that hostnames can be used instead of IP - addresses for the listen-address, that only the first address - returned will be used and what happens if the address is invalid. - Requested by Calestyo in #3302213.
+Relocate the connection-accepted message from listen_loop() to + serve(). This way it's printed by the thread that is actually + serving the connection which is nice when grepping for thread ids + in log files.
Log message improvements:
+Code cleanups:
If only the server connection is kept alive, do not pretent to - wait for a new client request.
+Remove compatibility layer for versions prior to 3.0 since it + has been obsolete for more than 10 years now.
Remove a superfluos log message in forget_connection()
+Remove the ijb_isupper() and ijb_tolower() macros from + parsers.c since they aren't used in this file.
In chat(), properly report missing server responses as such - instead of calling them empty
+Removed the 'Functions declared include:' comment sections + since they tend to be incomplete, incorrect and out of date and + the benefit seems questionable.
In forwarded_connect(), fix a log message nobody should ever - see
+Various comment grammar and comprehensibility + improvements.
Fix a log message in socks5_connect(), a failed write - operation was logged as failed read operation
+Remove a pointless fflush() call in chat(). Flushing all + streams pretty much all the time for no obvious reason is + ridiculous.
Let load_one_actions_file() properly complain about a missing - '{' at the beginning of the file Simply stating that a line is - invalid isn't particularly helpful.
+Relocate ijb_isupper()'s definition to project.h and get the + ijb_tolower() definition from there, too.
Do not claim to listen on a socket until Privoxy actually - does. Patch submitted by Petr Pisar #3354485
+Relocate ijb_isdigit()'s definition to project.h.
Prevent a duplicated LOG_LEVEL_CLF message when sending out - the "no-server-data" response
+Rename ijb_foo macros to privoxy_foo.
Also log the client socket when dropping a connection.
+Add malloc_or_die() which will allow to simplify code paths + where malloc() failures don't need to be handled gracefully.
Include the destination host in the 'Request ... marked for - blocking. limit-connect{...} doesn't allow CONNECT ...' message - Patch submitted by Saperski in #3296250.
+Add strdup_or_die() which will allow to simplify code paths + where strdup() failures don't need to be handled gracefully.
Prevent a duplicated log message if none of the resolved IP - addresses were reachable
+Replace strdup() calls with strdup_or_die() calls where it's + safe and simplifies the code.
In connect_to(), do not pretend to retry if - forwarded-connect-retries is zero or unset.
+Fix white-space around parentheses.
When a specified user or group can't be found, put the name in - single-quotes when logging it.
+Add missing white-space behind if's and the following + parentheses.
In rfc2553_connect_to(), explain getnameinfo() errors - better.
+Unwrap a memcpy() call in resolve_hostname_to_ip().
Remove a useless log message in chat()
+Declare pcrs_get_delimiter()'s delimiters[] static const.
When retrying to connect, also log the maximum number of - connection attempts
+Various optimisations to remove dead code and merge + inefficient code structures for improved clarity, performance or + code compactness.
Rephrase a log message in compile_dynamic_pcrs_job_list(). - Divide the error code and its meaning with a colon. Call the pcrs - job dynamic and not the filter. Filters may contain dynamic and - non-dynamic pcrs jobs at the same time. Only mention the name of - the filter or tagger, but don't claim it's a filter when it could - be a tagger.
+Various data type corrections.
In a fatal error message in load_one_actions_file(), cover - both URL and TAG patterns.
+Change visibility of several code segments when compiling + without FEATURE_CONNECTION_KEEP_ALIVE enabled for clarity.
In pcrs_strerror(), properly report unknown positive error - code values as such. Previously they were handled like 0 (no - error).
+In pcrs_get_delimiter(), do not use delimiters outside the + ASCII range. Fixes a clang complaint.
In compile_dynamic_pcrs_job_list(), also log the actual error - code as pcrs_strerror() doesn't handle all errors reported by - pcre
+Fix an error message in get_last_url() nobody is supposed to + see. Reported by Matthew Fischer in #3507301.
Don't bother trying to continue chatting if the client didn't - ask for it. Reduces log noise a bit.
+Fix a typo in the no-zlib-support complaint. Patch submitted + by Matthew Fischer in #3507304.
Make two fatal error message in load_one_actions_file() more - descriptive
+Shorten ssplit()'s prototype by removing the last two + arguments. We always want to skip empty fields and ignore leading + delimiters, so having parameters for this only complicates the + API.
In cgi_send_user_manual(), log when rejecting a file name due - to '/' or '..'
+Use an enum for the type of the action value.
In load_file(), log a message if opening a file failed The CGI - error message alone isn't too helpful.
+Rename action_name's member takes_value to value_type as it + isn't used as boolean.
In connection_destination_matches(), improve two log messages - to help understand why the destinations don't match.
+Turn family mismatches in match_sockaddr() into fatal + errors.
Rephrase a log message in serve(). Client request arrival - should be differentiated from closed client connections now.
+Let enlist_unique_header() verify that the caller didn't pass + a header containing either \r or \n.
In serve(), log if a client connection isn't reused due to a - configuration file change.
+Change the hashes used in load_config() to unsigned int. + That's what hash_string() actually returns and using a + potentially larger type is at best useless.
Let mark_server_socket_tainted() always mark the server socket - tainted, just don't talk about it in cases where it has no - effect. It doesn't change Privoxy's behaviour, but makes - understanding the log file easier.
+Use privoxy_tolower() instead of vanilla tolower() with manual + casting of the argument.
+Catch ssplit() failures in parse_cgi_parameters().
configure:
+Privoxy-Regression-Test:
Added a --disable-ipv6-support switch for platforms where - support is detected but doesn't actually work.
+Add an 'Overwrite condition' directive to skip any matching + tests before it. As it has a global scope, using it is more + convenient than clowning around with the Ignore directive.
Do not check for the existence of strerror() and memmove() - twice
+Log to STDOUT instead of STDERR.
Remove a useless test for setpgrp(2). Privoxy doesn't need it - and it can cause problems when cross-compiling.
+Include the Privoxy version in the output.
Rename the --disable-acl-files switch to - --disable-acl-support. Since about 2001, ACL directives are - specified in the standard config file.
+Various grammar and spelling corrections in documentation and + code.
Update the URL of the 'Removing outdated PCRE version after - the next stable release' posting. The old URL stopped working - after one of SF's recent site "optimizations". Reported by Han - Liu.
+Additional tests for range requests with filtering + enabled.
Privoxy-Regression-Test:
-Added --shuffle-tests option to increase the chances of - detection race conditions.
+Tests with mostly invalid range request.
Added a --local-test-file option that allows to use - Privoxy-Regression-Test without Privoxy
+Add a couple of hide-if-modified-since{} tests with different + date formats.
Added tests for missing socks4 and socks4a forwarders
+Cleaned up the format of the regression-tests.action file to + match the format of default.action.
The --privoxy-address option now works with IPv6 addresses - containing brackets, too
+Remove the "Copyright" line from print_version(). When using + --help, every line of screen space matters and thus shouldn't be + wasted on things the user doesn't care about.
Perform limited sanity checks for parameters that are supposed - to have numerical values.
-Privoxy-Log-Parser:
+Added a --sleep-time option to specify a number of seconds to - sleep between tests, defaults to 0.
+Improve the --statistics performance by skipping sanity checks + for input that shouldn't affect the results anyway. Add a + --strict-checks option that enables some of the checks again, + just in case anybody cares.
Disable the range-requests tagger for tests that break if it's - enabled
+The distribution of client requests per connection is included + in the --statistic output.
Log messages use the ISO 8601 date format %Y-%m-%d.
+The --accept-unknown-messages option has been removed and the + behavior is now the default.
Fix spelling in two error messages.
+Accept and (mostly) highlight new log messages introduced with + Privoxy 3.0.20.
In the --help output, include a list of supported tests and - their default levels.
-uagen:
+Adjust the tests to properly deal with FEATURE_TOGGLE being - disabled.
+Bump generated Firefox version to 17.
Privoxy-Log-Parser:
+GNUmakefile improvements:
Perform limited sanity checks for command line parameters that - are supposed to have numerical values.
+The dok-tidy target no longer taints documents with a + tidy-mark
Implement a --unbreak-lines-only option to try to revert MUA - breakage.
+Change RA_MODE from 0664 to 0644. Suggested by Markus Dittrich + in #3505445.
Accept and highlight: Added header: Content-Encoding: - deflate
+Remove tidy's clean flag as it changes the scope of + attributes. Link-specific colors end up being applied to all + text. Reported by Adam Piggott in #3569551.
Accept and highlight: Compressed content from 29258 to 8630 - bytes.
+Leave it up to the user whether or not smart tags are + inserted.
Accept and highlight: Client request arrived in time on socket - 21.
+Let w3m itself do the line wrapping for the config file. It + works better than fmt as it can honour pre tags causing less + unintentional line breaks.
Highlight: Didn't receive data in time: a.fsdn.com:443
+Ditch a pointless '-r' passed to rm to delete files.
Accept log messages with ISO 8601 time stamps, too
+The config-file target now requires less manual intervention + and updates the original config.
+Change WDUMP to generate ASCII. Add WDUMP_UTF8 to allow UTF-8 + in the AUTHORS file so the names are right.
+Stop pretending that lynx and links are supported for the + documentation.
uagen:
+configure improvements:
Bump generated Firefox version to 8.0
+On Haiku, do not pass -lpthread to the compiler. Haiku's + pthreads implementation is contained in its system library, + libroot, so no additional library needs to be searched. Patch + submitted by Simon South in #3564815.
Only randomize the release date if the new - --randomize-release-date option is enabled. Firefox versions - after 4 use a fixed date string without meaning.
+Additional Haiku-specific improvements. Disable checks + intended for multi-user systems as Haiku is presently + single-user. Group Haiku-specific settings in their own section, + following the pattern for Solaris, OS/2 and AmigaOS. Add + additional library-related settings to remove the need for + providing configure with custom LDFLAGS. Submitted by Simon South + in #3574538.
standard.action has been merged into - the default.action file.
-In the default configuration only fatal errors are logged now. You can change that in the debug @@ -974,7 +923,7 @@ body {