Releasing a new version

Prev 8. Releasing a new version6. Releasing a New Version

To minimize trouble with distribution contents, web-page - errors and the like, we strongly encourage you - to follow this section if you prepare a new release of - code or new pages on the webserver. +> When we release versions of Privoxy, + our work leaves our cozy secret lab and has to work in the cold + RealWorld[tm]. Once it is released, there is no way to call it + back, so it is very important that great care is taken to ensure + that everything runs fine, and not to introduce problems in the + very last minute. +

So when releasing a new version, please adhere exactly to the + procedure outlined in this chapter.

The following programs are required to follow this process: @@ -86,29 +101,162 @@ CLASS="FILENAME" >ncftpput (ncftp), scpscp, ssh (ssh), -gmake (GNU's version of make), autoconf, cvs, ???. +> (GNU's version of make), autoconf, cvs. +

6.1. Version numbers

First you need to determine which version number the release will have. + Privoxy version numbers consist of three numbers, + separated by dots, like in X.Y.Z (e.g. 3.0.0), where: +

X, the version major, is rarely ever changed. It is increased by one if + turning a development branch into stable substantially changes the functionality, + user interface or configuration syntax. Majors 1 and 2 were + Junkbuster, and 3 will be the first stable + Privoxy release. +
Y, the version minor, represents the branch within the major version. + At any point in time, there are two branches being maintained: + The stable branch, with an even minor, say, 2N, in which no functionality is + being added and only bug-fixes are made, and 2N+1, the development branch, in + which the further development of Privoxy takes + place. + This enables us to turn the code upside down and inside out, while at the same time + providing and maintaining a stable version. + The minor is reset to zero (and one) when the major is incremented. When a development + branch has matured to the point where it can be turned into stable, the old stable branch + 2N is given up (i.e. no longer maintained), the former development branch 2N+1 becomes the + new stable branch 2N+2, and a new development branch 2N+3 is opened. +
Z, the point or sub version, represents a release of the software within a branch. + It is therefore incremented immediately before each code freeze. + In development branches, only the even point versions correspond to actual releases, + while the odd ones denote the evolving state of the sources on CVS in between. + It follows that Z is odd on CVS in development branches most of the time. There, it gets + increased to an even number immediately before a code freeze, and is increased to an odd + number again immediately thereafter. + This ensures that builds from CVS snapshots are easily distinguished from released versions. + The point version is reset to zero when the minor changes. +
Stable branches work a little differently, since there should be + little to no development happening in such branches. Remember, + only bugfixes, which presumably should have had some testing + before being committed. Stable branches will then have their + version reported as 0.0.0, during that period + between releases when changes are being added. This is to denote + that this code is not for release. Then + as the release nears, the version is bumped according: e.g. + 3.0.1 -> 0.0.0 -> 3.0.2. +

In summary, the main CVS trunk is the development branch where new + features are being worked on for the next stable series. This should + almost always be where the most activity takes place. There is always at + least one stable branch from the trunk, e.g now it is + 3.0, which is only used to release stable versions. + Once the initial *.0 release of the stable branch has been done, then as a + rule, only bugfixes that have had prior testing should be committed to + the stable branch. Once there are enough bugfixes to justify a new + release, the version of this branch is again incremented Example: 3.0.0 + -> 3.0.1 -> 3.0.2, etc are all stable releases from within the stable + branch. 3.1.x is currently the main trunk, and where work on 3.2.x is + taking place. If any questions, please post to the devel list + before committing to a stable branch!

Replace X, Y and Z with the actual version number (X = major, Y = minor, Z = point): +> Developers should remember too that if they commit a bugfix to the stable + branch, this will more than likely require a separate submission to the + main trunk, since these are separate development trees within CVS. If you + are working on both, then this would require at least two separate check + outs (i.e main trunk, and the stable release branch, + which is v_3_0_branch at the moment).

8.1. Before the Release6.2. Before the Release: Freeze

The following The following must be done by one of the developers prior to each new release.

"no!" in case - they have pending changes/fixes in their pipelines. + they have pending changes/fixes in their pipelines. Announce the + freeze so that nobody will interfere with last minute changes.

Increment the version number in configure.in in - CVS. Also, increase or reset the RPM release number in - configure.in as appropriate. Do NOT - touch version information after export from CVS. - All packages will use the version and release data - from Increment the version number (point from odd to even in development + branches!) in configure.in. - Local files should not be changed, except prior to a CVS commit!!! - This way we are all on the same page! +>. (RPM spec files + will need to be incremented as well.)

If the default If actionsfiledefault.action has changed since last - release, bump up its version info in this line: + release (i.e. software release or standalone actions file release), + bump up its version info to A.B in this line:

@@ -170,8 +303,7 @@ WIDTH="90%" >

  {+add-header{X-Actions-File-Version: A.B} -filter -no-popups}
-

{+add-header{X-Actions-File-Version: A.B} -filter -no-popups}

All documentation should be rebuild after the version bump. + Finished docs should be then be committed to CVS (for those + without the ability to build these). Some docs may require + rather obscure processing tools. config, + the man page (and the html version of the man page), and the PDF docs + fall in this category. REAMDE, the man page, AUTHORS, and config + should all also be committed to CVS for other packagers. The + formal docs should be uploaded to the webserver. See the + Section "Updating the webserver" in this manual for details. +

The User Manual is also used for context + sensitive help for the CGI editor. This is version sensitive, so that + the user will get appropriate help for his/her release. So with + each release a fresh version should be uploaded to the webserver + (this is in addition to the main User Manual + link from the main page since we need to keep manuals for various + versions available). The CGI pages will link to something like + http://privoxy.org/$(VERSION)/user-manual/. This + will need to be updated for each new release. There is no Makefile + target for this at this time!!! It needs to be done manually. +

All developers should look at the ChangeLog and + make sure noteworthy changes are referenced. +

Commit all files that were changed in the above steps!

The first package uploaded should be the official - "tarball" release, as required by the GPL. This is built - with the "make tarball-dist" Makefile - target, and then can be uploaded with - "make tarball-upload" (see below). +> If the release was in a development branch, increase the point version + from even to odd (X.Y.(Z+1)) again in configure.in and + commit your change. +

On the webserver, copy the user manual to a new top-level directory + called X.Y.Z. This ensures that help links from the CGI + pages, which have the version as a prefix, will go into the right version of the manual. + If this is a development branch release, also symlink X.Y.(Z-1) + to X.Y.Z and X.Y.(Z+1) to + . (i.e. dot).

`8.2. Update the webserver6.3. Building and Releasing the Packages`

All files must be group-readable and group-writable (or no one else - will be able to change them)! To update the webserver, create any - pages locally in the doc/webserver/* directory (or - create new directories under doc/webserver), then do -

Now the individual packages can be built and released. Note that for + GPL reasons the first package to be released is always the source tarball. + For all types of packages, including the source tarball, + you must make sure that you build from clean sources by exporting + the right version from CVS into an empty directory (just press return when + asked for a password): + make webserver - mkdir dist # delete or choose different name if it already exists + cd dist + cvs -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa login + cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current - Do NOT change a single bit, including, but not limited to + version information after export from CVS. This is to make sure that + all release packages, and with them, all future bug reports, are based + on exactly the same code. + Warning This will do the upload to the webserver (www.privoxy.org). +> Every significant release of Privoxy has included at least one + package that either had incorrect versions of files, missing files, + or incidental leftovers from a previous build process that gave + unknown numbers of users headaches to try to figure out what was + wrong. PLEASE, make sure you are using pristene sources, and are + following the prescribed process! Note that "make dok" - (or "make redhat-dok") creates - doc/webserver/user-manual, - doc/webserver/developer-manual, - doc/webserver/faq and - Please find additional instructions for the source tarball and the + individual platform dependent binary packages below. And details + on the Sourceforge release process below that. + 6.3.1. Note on Privoxy Packaging Please keep these general guidelines in mind when putting together + your package. These apply to all platforms! + Privoxy requires + write access to: all doc/webserver/index.html automatically. - (*.action files, all + logfiles, and the doc/webserver/man-page/privoxy-man-page.html - is created by a separate Makefile target, "make - man", due to dependencies on some obscure perl scripts. - See comments in trust file. You will + need to determine the best way to do this for your platform. + Please include up to date documentation. At a bare minimum: + GNUmakefile.) - LICENSE (top-level directory) + - Someone should also commit these to CVS so that packagers without the - ability to build docs locally, have access to them. This is a separate - step, and should also be done before each official release. - Please do NOT use any other means of transferring files to the - webserver. "make webserver" not only - uploads, but will make sure that the appropriate permissions are - preserved for shared group access. - 8.3. SuSE or Red Hat README (top-level directory) + Ensure that you have the latest code version. Hence run: - AUTHORS (top-level directory) + cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login - cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current - cd current - - first. - man page (top-level directory, Unix-like + platforms only) + autoheader && autoconf && ./configure - - Then do - The User Manual (doc/webserver/user-manual/) + make suse-dist or make redhat-dist - - To upload the package to Sourceforge, simply issue - FAQ (doc/webserver/faq/) + make suse-upload (or make redhat-upload) - Also suggested: Developer Manual - ChangeLog + (top-level directory). FAQ and the manuals are + HTML docs. There are also text versions in + doc/text/ which could conceivably also be + included. + Go to the displayed URL and release the file publicly on Sourceforge. +> The documentation has been designed such that the manuals are linked + to each other from parallel directories, and should be packaged + that way. privoxy-index.html can also be + included and can serve as a focal point for docs and other links of + interest (and possibly renamed to index.html). + This should be one level up from the manuals. There is a link also + on this page to an HTMLized version of the man page. To avoid 404 for + this, it is in CVS as + doc/webserver/man-page/privoxy-man-page.html, + and should be included along with the manuals. There is also a + css stylesheets that can be included for better presentation: + p_doc.css. This should be in the same directory + with privoxy-index.html, (i.e. one level up from + the manual directories). + user.action and user.filter + are designed for local preferences. Make sure these do not get overwritten! + config should not be overwritten either. This + has especially important configuration data in it. + trust should be left in tact as well. + Other configuration files (default.action and + default.filter) should be installed as the new + defaults, but all previously installed configuration files should be + preserved as backups. This is just good manners :-) These files are + likely to change between releases and contain important new features + and bug fixes. + Please check platform specific notes in this doc, if you haven't + done "Privoxy" packaging before for other platform + specific issues. Conversely, please add any notes that you know + are important for your platform (or contact one of the doc + maintainers to do this if you can't). Packagers should do a "clean" install of their + package after building it. So any previous installs should be + removed first to ensure the integrity of the newly built package. + Then run the package for a while to make sure there are no + obvious problems, before uploading. + + 8.4. OS/2 6.3.2. Source Tarball Ensure that you have the latest code version. Hence run: +> First, make sure that you have freshly exported the right + version into an empty directory. (See "Building and releasing + packages" above). Then run: cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login - cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current - cd .. - cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa co os2setup - cd current + autoheader && autoconf && ./configure You will need a mix of development tools. - The main compilation takes place with IBM Visual Age C++. - Some ancillary work takes place with GNU tools, available from - various sources like hobbes.nmsu.edu. - Specificially, you will need autoheader, - autoconf and sh tools. - The packaging takes place with WarpIN, available from various sources, including - its home page: xworkplace. +> Then do: Change directory to the os2setup directory. - Edit the os2build.cmd file to set the final executable filename. - For example, - installExeName='privoxyos2_setup_X.Y.Z.exe' - - Next, edit the IJB.wis file so the release number matches - in the PACKAGEID section: - PACKAGEID="Privoxy Team\Privoxy\Privoxy Package\X\Y\Z" - make tarball-dist - You're now ready to build. Run: - To upload the package to Sourceforge, simply issue + os2build - make tarball-upload - And in the ./files directory you will have the - WarpIN-installable executable. - Upload this anonymously to - uploads.sourceforge.net/incoming, create a release - for it, and you're done. Go to the displayed URL and release the file publicly on Sourceforge. + For the change log field, use the relevant section of the + ChangeLog file. + 8.5. Solaris 6.3.3. SuSE, Conectiva or Red Hat RPM In following text, replace dist + with either "rh" for Red Hat or "suse" for SuSE. + Login to Sourceforge's compilefarm via ssh +> First, make sure that you have freshly exported the right + version into an empty directory. (See "Building and releasing + packages" above). ssh cf.sourceforge.net - As the only exception to not changing anything after export from CVS, + now examine the file privoxy-dist.spec + and make sure that the version information and the RPM release number are + correct. The RPM release numbers for each version start at one. Hence it must + be reset to one if this is the first RPM for + dist which is built from version + X.Y.Z. Check the + file + list if unsure. Else, it must be set to the highest already available RPM + release number for that version plus one. Choose the right operating system (not the Debian one). If you have - downloaded Privoxy before, +> Then run: cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login - cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current - cd current - cd current + autoheader && autoconf && ./configure If not, please checkout - Privoxy via CVS first. Run: +> Then do autoheader && autoconf && ./configure - make dist-dist Then run +> To upload the package to Sourceforge, simply issue gmake solaris-dist - make dist-upload rpm_packagerev which creates a gzip'ed tar archive. Sadly, you cannot use make - solaris-upload on the Sourceforge machine (no ncftpput). You now have - to manually upload the archive to Sourceforge's ftp server and release - the file publicly. - where rpm_packagerev is the + RPM release number as determined above. + Go to the displayed URL and release the file publicly on Sourceforge. + Use the release notes and change log from the source tarball package. + 8.6. Windows You should ensure you have the latest version of Cygwin (from - http://www.cygwin.com/). - Run the following commands from within a Cygwin bash shell. - 6.3.4. OS/2 First check out a clean copy of the correct code version, by running: - First, make sure that you have freshly exported the right + version into an empty directory. (See "Building and releasing + packages" above). Then get the OS/2 Setup module: + mkdir dist - cd dist - cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login - cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z . - cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co os2setup - (Note: It is important that this is a clean copy of the code, - do not re-use a working directory after you have manually compiled - there). - Then you can build the package. This is fully automated, and is - controlled by You will need a mix of development tools. + The main compilation takes place with IBM Visual Age C++. + Some ancillary work takes place with GNU tools, available from + various sources like hobbes.nmsu.edu. + Specificially, you will need winsetup/GNUmakefileautoheader, + autoconf and sh tools. + The packaging takes place with WarpIN, available from various sources, including + its home page: xworkplace. - All you need to do is: - Change directory to the os2setup directory. + Edit the os2build.cmd file to set the final executable filename. + For example, + cd winsetup - make - installExeName='privoxyos2_setup_X.Y.Z.exe' - Now you can manually rename Next, edit the privoxy_setup.exe to - IJB.wis file so the release number matches + in the privoxy_setup_X_Y_Z.exe, and upload it to - SourceForge. - 8.7. Debian Ensure that you have the latest code version. Hence run: - PACKAGEID section: + cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login - cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current - cd current - PACKAGEID="Privoxy Team\Privoxy\Privoxy Package\X\Y\Z" first. Run: +> You're now ready to build. Run: autoheader && autoconf && ./configure - os2build Then do FIXME. +> You will find the WarpIN-installable executable in the + ./files directory. Upload this anonymously to + uploads.sourceforge.net/incoming, create a release + for it, and you're done. Use the release notes and Change Log from the + source tarball package. 8.8. Mac OSX 6.3.5. Solaris Ensure that you have the latest code version. Hence run: +> Login to Sourceforge's compilefarm via ssh: cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login - cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current - cd .. - cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa co osxsetup - - From the osxsetup directory, run: - build - ssh cf.sourceforge.net This will run autoheader, autoconf and - configure as well as make. - Finally, it will copy over the necessary files to the ./osxsetup/files directory - for further processing by PackageMaker. +> Choose the right operating system (not the Debian one). + When logged in, make sure that you have freshly exported the right + version into an empty directory. (See "Building and releasing + packages" above). Then run: Bring up PackageMaker with the PrivoxyPackage.pmsp definition file, modify the package - name to match the release, and hit the "Create package" button. - If you specify ./Privoxy.pkg as the output package name, you can then create - the distributable zip file with the command: - zip -r privoxyosx_setup_x.y.z.zip Privoxy.pkg - cd current + autoheader && autoconf && ./configure - You can then upload privoxyosx_setup_x.y.z.zip anonymously to - uploads.sourceforge.net/incoming, - create a release for it, and you're done. 8.9. FreeBSD Change the version number of Privoxy in the - configure.in file. Run: - Then run + autoheader && autoconf && ./configure - gmake solaris-dist - Then ... - Login to Sourceforge's compilefarm via ssh: +> which creates a gzip'ed tar archive. Sadly, you cannot use make + solaris-upload on the Sourceforge machine (no ncftpput). You now have + to manually upload the archive to Sourceforge's ftp server and release + the file publicly. Use the release notes and Change Log from the + source tarball package. 6.3.6. Windows You should ensure you have the latest version of Cygwin (from + http://www.cygwin.com/). + Run the following commands from within a Cygwin bash shell. + First, make sure that you have freshly exported the right + version into an empty directory. (See "Building and releasing + packages" above). Then get the Windows setup module: + ssh cf.sourceforge.net - cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co winsetup - Choose the right operating system. - Then you can build the package. This is fully automated, and is + controlled by winsetup/GNUmakefile. + All you need to do is: + cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login - cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current - cd current - cd winsetup + make - Run: - Now you can manually rename privoxy_setup.exe to + privoxy_setup_X_Y_Z.exe, and upload it to + SourceForge. When releasing the package on SourceForge, use the release notes + and Change Log from the source tarball package. + 6.3.7. Debian First, make sure that you have freshly exported the + right version into an empty directory. (See + "Building and releasing packages" above). Then add a log + entry to debian/changelog, if it is not + already there, for example by running: + autoheader && autoconf && ./configure - debchange -v 3.0.17-stable-1 "New upstream version" - Then run: - Then, run: + gmake freebsd-dist - dpkg-buildpackage -rfakeroot -us -uc -b - which creates a gzip'ed tar archive. Sadly, you cannot use make - freebsd-upload on the Sourceforge machine (no ncftpput). You now have - to manually upload the archive to Sourceforge's ftp server and release - the file publicly. - 8.10. Tarball Ensure that you have the right code version. Hence run: - This will create + ../privoxy_3.0.17-stable-1_i386.deb + which can be uploaded. To upload the package to Sourceforge, simply + issue + cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login - cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current - cd current - make debian-upload - 6.3.8. Mac OS X first. Run: +> First, make sure that you have freshly exported the right + version into an empty directory. (See "Building and releasing + packages" above). Then get the Mac OS X setup module: autoheader && autoconf && ./configure - cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co osxsetup Then do: +> Then run: make tarball-dist - cd osxsetup + build To upload the package to Sourceforge, simply issue +> This will run autoheader, autoconf and + configure as well as make. + Finally, it will copy over the necessary files to the ./osxsetup/files directory + for further processing by PackageMaker. + Bring up PackageMaker with the PrivoxyPackage.pmsp definition file, modify the package + name to match the release, and hit the "Create package" button. + If you specify ./Privoxy.pkg as the output package name, you can then create + the distributable zip file with the command: make tarball-upload - zip -r privoxyosx_setup_x.y.z.zip Privoxy.pkg Goto the displayed URL and release the file publicly on Sourceforge. - You can then upload privoxyosx_setup_x.y.z.zip anonymously to + uploads.sourceforge.net/incoming, + create a release for it, and you're done. Use the release notes + and Change Log from the source tarball package. + 8.11. HP-UX 11 6.3.9. FreeBSD Ensure that you have the latest code version. Hence run: +> Login to Sourceforge's compile-farm via ssh: cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login - cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current - cd current - ssh cf.sourceforge.net first. Run: +> Choose the right operating system. + When logged in, make sure that you have freshly exported the right + version into an empty directory. (See "Building and releasing + packages" above). Then run: autoheader && autoconf && ./configure - cd current + autoheader && autoconf && ./configure Then do FIXME. - 8.12. Amiga OS Ensure that you have the latest code version. Hence run: +> Then run: cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login - cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current - cd current - gmake freebsd-dist first. Run: +> which creates a gzip'ed tar archive. Sadly, you cannot use make + freebsd-upload on the Sourceforge machine (no ncftpput). You now have + to manually upload the archive to Sourceforge's ftp server and release + the file publicly. Use the release notes and Change Log from the + source tarball package. + 6.3.10. HP-UX 11 First, make sure that you have freshly exported the right + version into an empty directory. (See "Building and releasing + packages" above). Then run: autoheader && autoconf && ./configure - cd current + autoheader && autoconf && ./configure 8.13. AIX 6.3.11. Amiga OS Login to Sourceforge's compilefarm via ssh: +> First, make sure that you have freshly exported the right + version into an empty directory. (See "Building and releasing + packages" above). Then run: ssh cf.sourceforge.net - cd current + autoheader && autoconf && ./configure Choose the right operating system. If you have downloaded Privoxy - before: +> Then do FIXME. + 6.3.12. AIX Login to Sourceforge's compilefarm via ssh: cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login - cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current - cd current - ssh cf.sourceforge.net If not, please checkout - Privoxy via CVS first. Run: +> Choose the right operating system. + When logged in, make sure that you have freshly exported the right + version into an empty directory. (See "Building and releasing + packages" above). Then run: autoheader && autoconf && ./configure - cd current + autoheader && autoconf && ./configure make aix-dist - make aix-dist on the Sourceforge machine (no ncftpput). You now have to manually upload the archive to Sourceforge's ftp server and release - the file publicly. + the file publicly. Use the release notes and Change Log from the + source tarball package.

6.1. Version numbers

8.1. Before the Release6.2. Before the Release: Freeze

`8.2. Update the webserver6.3. Building and Releasing the Packages`

`6.3.1. Note on Privoxy Packaging`

`8.3. SuSE or Red Hat`

8.4. OS/2

8.5. Solaris

8.6. Windows

`8.7. Debian`

8.8. Mac OSX

8.9. FreeBSD

6.3.6. Windows

6.3.7. Debian

8.10. Tarball

6.3.8. Mac OS X

8.11. HP-UX 11

8.12. Amiga OS

6.3.10. HP-UX 11

8.13. AIX

6.3.12. AIX

`6.4. Uploading and Releasing Your Package`

`6.5. After the Release`