Releasing a New Version

Prev 8. Releasing a New Version6. Releasing a New Version

When we release versions of 8.1. Version numbers6.1. Version numbers

First you need to determine which version number the release will have. @@ -116,7 +122,7 @@ NAME="VERSIONNUMBERS" CLASS="APPLICATION" >Privoxy version numbers consist of three numbers, - separated by dots, like in X.Y.Z, where: + separated by dots, like in X.Y.Z (e.g. 3.0.0), where:

Privoxy

Stable branches work a little differently, since there should be + little to no development happening in such branches. Remember, + only bugfixes, which presumably should have had some testing + before being committed. Stable branches will then have their + version reported as 0.0.0, during that period + between releases when changes are being added. This is to denote + that this code is not for release. Then + as the release nears, the version is bumped according: e.g. + 3.0.1 -> 0.0.0 -> 3.0.2. +

In summary, the main CVS trunk is the development branch where new + features are being worked on for the next stable series. This should + almost always be where the most activity takes place. There is always at + least one stable branch from the trunk, e.g now it is + 3.0, which is only used to release stable versions. + Once the initial *.0 release of the stable branch has been done, then as a + rule, only bugfixes that have had prior testing should be committed to + the stable branch. Once there are enough bugfixes to justify a new + release, the version of this branch is again incremented Example: 3.0.0 + -> 3.0.1 -> 3.0.2, etc are all stable releases from within the stable + branch. 3.1.x is currently the main trunk, and where work on 3.2.x is + taking place. If any questions, please post to the devel list + before committing to a stable branch! +

Developers should remember too that if they commit a bugfix to the stable + branch, this will more than likely require a separate submission to the + main trunk, since these are separate development trees within CVS. If you + are working on both, then this would require at least two separate check + outs (i.e main trunk, and the stable release branch, + which is v_3_0_branch at the moment). +

8.2. Before the Release: Freeze6.2. Before the Release: Freeze

The following The following must be done by one of the developers prior to each new release.

configure.in. +>. (RPM spec files + will need to be incremented as well.)

If the HTML documentation is not in sync with the SGML sources - you need to regenerate and upload it to the webserver. (If in - doubt, just do it.) See the Section "Updating the webserver" in - this manual for details. +> All documentation should be rebuild after the version bump. + Finished docs should be then be committed to CVS (for those + without the ability to build these). Some docs may require + rather obscure processing tools. config, + the man page (and the html version of the man page), and the PDF docs + fall in this category. REAMDE, the man page, AUTHORS, and config + should all also be committed to CVS for other packagers. The + formal docs should be uploaded to the webserver. See the + Section "Updating the webserver" in this manual for details. +

The User Manual is also used for context + sensitive help for the CGI editor. This is version sensitive, so that + the user will get appropriate help for his/her release. So with + each release a fresh version should be uploaded to the webserver + (this is in addition to the main User Manual + link from the main page since we need to keep manuals for various + versions available). The CGI pages will link to something like + http://privoxy.org/$(VERSION)/user-manual/. This + will need to be updated for each new release. There is no Makefile + target for this at this time!!! It needs to be done manually. +

All developers should look at the ChangeLog and + make sure noteworthy changes are referenced.

Commit all files that were changed in the above steps!

8.3. Building and Releasing the Packages6.3. Building and Releasing the Packages
Now the individual packages can be built and released. Note that for GPL reasons the first package to be released is always the source tarball.
For For all types of packages, including the source tarball, - you must make sure that you build from clean sources by exporting - the right version from CVS into an empty directory:. + the right version from CVS into an empty directory (just press return when + asked for a password):

mkdir dist # delete or choose different name if it already exists cd dist - cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login - cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current

Do NOT change a single bit, including, but not limited to version information after export from CVS. This is to make sure that all release packages, and with them, all future bug reports, are based on exactly the same code.
Warning
Every significant release of Privoxy has included at least one + package that either had incorrect versions of files, missing files, + or incidental leftovers from a previous build process that gave + unknown numbers of users headaches to try to figure out what was + wrong. PLEASE, make sure you are using pristene sources, and are + following the prescribed process! +
Please find additional instructions for the source tarball and the - individual platform dependent binary packages below. + individual platform dependent binary packages below. And details + on the Sourceforge release process below that.
6.3.1. Note on Privoxy Packaging
Please keep these general guidelines in mind when putting together + your package. These apply to all platforms! +

Privoxy requires + write access to: all *.action files, all + logfiles, and the trust file. You will + need to determine the best way to do this for your platform. +
Please include up to date documentation. At a bare minimum: +
LICENSE (top-level directory) +
README (top-level directory) +
AUTHORS (top-level directory) +
man page (top-level directory, Unix-like + platforms only) +
The User Manual (doc/webserver/user-manual/) +
FAQ (doc/webserver/faq/) +
Also suggested: Developer Manual + (doc/webserver/developer-manual) and ChangeLog + (top-level directory). FAQ and the manuals are + HTML docs. There are also text versions in + doc/text/ which could conceivably also be + included. +
The documentation has been designed such that the manuals are linked + to each other from parallel directories, and should be packaged + that way. privoxy-index.html can also be + included and can serve as a focal point for docs and other links of + interest (and possibly renamed to index.html). + This should be one level up from the manuals. There is a link also + on this page to an HTMLized version of the man page. To avoid 404 for + this, it is in CVS as + doc/webserver/man-page/privoxy-man-page.html, + and should be included along with the manuals. There is also a + css stylesheets that can be included for better presentation: + p_doc.css. This should be in the same directory + with privoxy-index.html, (i.e. one level up from + the manual directories). +
user.action and user.filter + are designed for local preferences. Make sure these do not get overwritten! + config should not be overwritten either. This + has especially important configuration data in it. + trust should be left in tact as well. +
Other configuration files (default.action and + default.filter) should be installed as the new + defaults, but all previously installed configuration files should be + preserved as backups. This is just good manners :-) These files are + likely to change between releases and contain important new features + and bug fixes. +
Please check platform specific notes in this doc, if you haven't + done "Privoxy" packaging before for other platform + specific issues. Conversely, please add any notes that you know + are important for your platform (or contact one of the doc + maintainers to do this if you can't). +
Packagers should do a "clean" install of their + package after building it. So any previous installs should be + removed first to ensure the integrity of the newly built package. + Then run the package for a while to make sure there are no + obvious problems, before uploading. +
+
8.3.1. Source Tarball6.3.2. Source Tarball
First, First, make sure that you have freshly exported the right version into an empty directory. (See "Building and releasing packages" above). Then run:
8.3.2. SuSE or Red Hat RPM6.3.3. SuSE, Conectiva or Red Hat RPM
In following text, replace for SuSE.
First, First, make sure that you have freshly exported the right version into an empty directory. (See "Building and releasing packages" above).
8.3.3. OS/26.3.4. OS/2 First, First, make sure that you have freshly exported the right version into an empty directory. (See "Building and releasing packages" above). Then get the OS/2 Setup module: cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa co os2setup cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co os2setup8.3.4. Solaris6.3.5. Solaris Login to Sourceforge's compilefarm via ssh: @@ -747,10 +1183,13 @@ CLASS="PROGRAMLISTING" Choose the right operating system (not the Debian one). - When logged in, make sure that you have freshly exported the right version into an empty directory. (See "Building and releasing packages" above). Then run: 8.3.5. Windows6.3.6. Windows You should ensure you have the latest version of Cygwin (from @@ -817,10 +1256,13 @@ TARGET="_top" Run the following commands from within a Cygwin bash shell. First, First, make sure that you have freshly exported the right version into an empty directory. (See "Building and releasing packages" above). Then get the Windows setup module: cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa co winsetup cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co winsetup cd winsetup - make cd winsetup + make8.3.6. Debian6.3.7. Debian First, First, make sure that you have freshly exported the right - version into an empty directory. (See "Building and releasing - packages" above). Then, run: - make sure that you have freshly exported the + right version into an empty directory. (See + "Building and releasing packages" above). Then add a log + entry to debian/changelog, if it is not + already there, for example by running: + cd current - autoheader && autoconf && ./configure debchange -v 3.0.12-stable-1 "New upstream version" - Then do FIXME. - Then, run: + dpkg-buildpackage -rfakeroot -us -uc -b + This will create + ../privoxy_3.0.12-stable-1_i386.deb + which can be uploaded. To upload the package to Sourceforge, simply + issue + make debian-upload +
8.3.7. Mac OSX6.3.8. Mac OS X First, First, make sure that you have freshly exported the right version into an empty directory. (See "Building and releasing - packages" above). Then get the Mac OSX setup module: + packages" above). Then get the Mac OS X setup module: cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa co osxsetup cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co osxsetup zip -r privoxyosx_setup_x.y.z.zip Privoxy.pkg zip -r privoxyosx_setup_x.y.z.zip Privoxy.pkg8.3.8. FreeBSD6.3.9. FreeBSD Login to Sourceforge's compilefarm via ssh: +> Login to Sourceforge's compile-farm via ssh: Choose the right operating system. - When logged in, make sure that you have freshly exported the right version into an empty directory. (See "Building and releasing packages" above). Then run: 8.3.9. HP-UX 116.3.10. HP-UX 11 First, First, make sure that you have freshly exported the right version into an empty directory. (See "Building and releasing packages" above). Then run: 8.3.10. Amiga OS6.3.11. Amiga OS First, First, make sure that you have freshly exported the right version into an empty directory. (See "Building and releasing packages" above). Then run: 8.3.11. AIX6.3.12. AIX Login to Sourceforge's compilefarm via ssh: @@ -1197,10 +1697,13 @@ CLASS="PROGRAMLISTING" Choose the right operating system. - When logged in, make sure that you have freshly exported the right version into an empty directory. (See "Building and releasing packages" above). Then run: 8.4. Uploading and Releasing Your Package6.4. Uploading and Releasing Your Package After the package is ready, it is time to upload it @@ -1296,10 +1799,16 @@ CLASS="LITERAL" > Or use the make targets as described above. + Once this done go to http://sourceforge.net/project/admin/editpackages.php?group_id=11118https://sourceforge.net/project/admin/editpackages.php?group_id=11118, making sure you are logged in. Find your target platform in the second column, and click $VERSION ($CODE_STATUS), e.g. , e.g. 2.9.14 +>3.0.12 (beta). 8.5. After the Release6.5. After the Release When all (or: most of the) packages have been uploaded and made available, @@ -1374,7 +1886,10 @@ HREF="http://sourceforge.net/project/showfiles.php?group_id=11118" TARGET="_top" >download location, the release notes and the change log. +>, the release notes and the Changelog. Also, post an + updated News item on the project page Sourceforge, and update the Home + page and docs linked from the Home page (see below). Other news sites + and release oriented sites, such as Freshmeat, should also be notified. PrevHome Next