X-Git-Url: http://www.privoxy.org/gitweb/?p=privoxy.git;a=blobdiff_plain;f=config;h=06fac21be285f7ae17adb3d3a3e8624099e8ef70;hp=082f9308588c8297385c03c06aec6e9710c16066;hb=bcff1ccdbaae18be3577638568851b7e9aedaa30;hpb=21b120cca854eda6a61ff35c2568c8c3a4922bdc diff --git a/config b/config index 082f9308..06fac21b 100644 --- a/config +++ b/config @@ -1,343 +1,1179 @@ -# Sample Configuration file for the Internet Junkbuster 2.0 +# Sample Configuration File for Privoxy v3.0.4 +# +# $Id: p-config.sgml,v 2.9 2006/09/06 11:38:33 fabiankeil Exp $ +# +# Copyright (C) 2001-2006 Privoxy Developers http://privoxy.org +# +#################################################################### +# # +# Table of Contents # +# # +# I. INTRODUCTION # +# II. FORMAT OF THE CONFIGURATION FILE # +# # +# 1. LOCAL SET-UP DOCUMENTATION # +# 2. CONFIGURATION AND LOG FILE LOCATIONS # +# 3. DEBUGGING # +# 4. ACCESS CONTROL AND SECURITY # +# 5. FORWARDING # +# 6. WINDOWS GUI OPTIONS # +# # +#################################################################### +# +# +# I. INTRODUCTION +# =============== +# +# This file holds the Privoxy configuration. If you modify this file, +# you will need to send a couple of requests (of any kind) to the +# proxy before any changes take effect. +# +# When starting Privoxy on Unix systems, give the name of this file as +# an argument. On Windows systems, Privoxy will look for this file +# with the name 'config.txt' in the same directory where Privoxy +# is installed. +# +# +# II. FORMAT OF THE CONFIGURATION FILE +# ==================================== +# +# Configuration lines consist of an initial keyword followed by a +# list of values, all separated by whitespace (any number of spaces +# or tabs). For example, +# +# actionsfile default.action +# +# Indicates that the actionsfile is named 'default.action'. +# +# The '#' indicates a comment. Any part of a line following a '#' +# is ignored, except if the '#' is preceded by a '\'. +# +# Thus, by placing a # at the start of an existing configuration line, +# you can make it a comment and it will be treated as if it weren't +# there. This is called "commenting out" an option and can be useful. +# +# Note that commenting out and option and leaving it at its default +# are two completely different things! Most options behave very +# differently when unset. See the the "Effect if unset" explanation +# in each option's description for details. +# +# Long lines can be continued on the next line by using a `\' as the +# last character. +# # -# $Id: config,v 1.9 2001/06/01 20:17:10 jongfoster Exp $ +# 1. LOCAL SET-UP DOCUMENTATION +# ============================= +# +# If you intend to operate Privoxy for more users than just yourself, +# it might be a good idea to let them know how to reach you, what +# you block and why you do that, your policies, etc. # -# Table of Contents # -# 1. INTRODUCTION -# 2. FORMAT OF THE CONFIGURATION FILE -# 3. OTHER CONFIGURATION FILES -# 4. GENERAL OPTIONS -# 5. WINDOWS GUI OPTIONS +# 1.1. user-manual +# ================ # -# 1. INTRODUCTION +# Specifies: # -# This file holds the Junkbuster configuration. If you modify this -# file, you will need to stop & restart Junkbuster, or use the -# "Reload Config" option (Windows) before any changes take effect. +# Location of the Privoxy User Manual. # -# When starting Junkbuster on Unix systems, give the name of this -# file as an argument. On Windows systems, Junkbuster will look for -# this file with the name 'junkbustr.txt' in the same directory where -# Junkbuster is installed. +# Type of value: # -# 2. FORMAT OF THE CONFIGURATION FILE +# A fully qualified URI # -# Configuration lines consist of an initial keyword followed by a list -# of values, all separated by whitespace (any number of spaces or -# tabs). For example, +# Default value: # -# blockfile blocklist.ini +# Unset # -# Indicates that the blockfile is named 'blocklist.ini'. +# Effect if unset: # -# The '#' indicates a comment. Any part of a line following a '#' is -# ignored, except if the '#' is preceded by a '\'. +# http://www.privoxy.org/version/user-manual/ will be used, +# where version is the Privoxy version. # -# Thus, by placing a # at the start of an existing configuration line, -# you can make it a comment and it will be treated as if it weren't there. -# This is called "commenting out" an option and can be useful to turn -# off features: If you comment out the "logfile" line, junkbuster will -# not log at all. Watch for the "default:" section in each explanation -# to see what happens if the option is left unset (or commented out). -# -# Long lines can be continued on the next line by using a `\' as -# the last character. This also works if comments are present in -# between. -# +# Notes: +# +# The User Manual URI is the single best source of information on +# Privoxy, and is used for help links from some of the internal +# CGI pages. The manual itself is normally packaged with the +# binary distributions, so you probably want to set this to +# a locally installed copy. For multi-user setups, you could +# provide a copy on a local webserver for all your users and use +# the corresponding URL here. +# +# Examples: +# +# The best all purpose solution is simply to put the full local +# PATH to where the User Manual is located: +# +# user-manual /usr/share/doc/privoxy/user-manual +# +# The User Manual is then available to anyone with +# access to the proxy, by following the built-in URL: +# http://config.privoxy.org/user-manual/ (or the shortcut: +# http://p.p/user-manual/). +# +# If the documentation is not on the local system, it can be +# accessed from a remote server, as: +# +# user-manual http://example.com/privoxy/user-manual/ +# +# WARNING!!! +# +# If set, this option should be the first option in the config +# file, because it is used while the config file is being read. +# +#user-manual http://www.privoxy.org/user-manual/ # -# 3. OTHER CONFIGURATION FILES +# 1.2. trust-info-url +# =================== +# +# Specifies: +# +# A URL to be displayed in the error page that users will see if +# access to an untrusted page is denied. +# +# Type of value: +# +# URL +# +# Default value: +# +# Two example URL are provided +# +# Effect if unset: +# +# No links are displayed on the "untrusted" error page. +# +# Notes: +# +# The value of this option only matters if the experimental trust +# mechanism has been activated. (See trustfile above.) +# +# If you use the trust mechanism, it is a good idea to write +# up some on-line documentation about your trust policy and to +# specify the URL(s) here. Use multiple times for multiple URLs. # -# Junkbuster uses a number of other files to tell it what ads to -# block, what cookies to accept, etc. This section of the -# configuration file tells Junkbuster where to find all those other -# files. +# The URL(s) should be added to the trustfile as well, so users +# don't end up locked out from the information on why they were +# locked out in the first place! # -# On Windows, Junkbuster looks for these files in the same -# directory as the executable. On Unix, Junkbuster looks for these -# files in the current working directory. In either case, an -# absolute path name can be used to avoid problems. +trust-info-url http://www.example.com/why_we_block.html +trust-info-url http://www.example.com/what_we_allow.html -# While we go modular and multiuser, the blocker, filter, and -# per-user config will be stored in subdirectories of confdir. -# Now, only confdir/templates is used for storing HTML templates -# for CGI results. # -confdir /home/oes/projekte/pcrs/ijb/confdir +# 1.3. admin-address +# ================== +# +# Specifies: +# +# An email address to reach the proxy administrator. +# +# Type of value: +# +# Email address +# +# Default value: +# +# Unset +# +# Effect if unset: +# +# No email address is displayed on error pages and the CGI user +# interface. +# +# Notes: +# +# If both admin-address and proxy-info-url are unset, the whole +# "Local Privoxy Support" box on all generated pages will not +# be shown. +# +#admin-address privoxy-admin@example.com # -# The permissions file contains patterns to specify the -# filtering rules to apply to each site. +# 1.4. proxy-info-url +# =================== +# +# Specifies: +# +# A URL to documentation about the local Privoxy setup, +# configuration or policies. +# +# Type of value: +# +# URL +# +# Default value: +# +# Unset +# +# Effect if unset: +# +# No link to local documentation is displayed on error pages and +# the CGI user interface. +# +# Notes: +# +# If both admin-address and proxy-info-url are unset, the whole +# "Local Privoxy Support" box on all generated pages will not +# be shown. # -# Default: Cookies to and from all destinations are filtered. -# Popups are disabled for all sites. -# All sites are filtered if re_filterfile specified. -# No sites are blocked. Nothing is an image. +# This URL shouldn't be blocked ;-) # -permissionsfile ./permissionsfile +#proxy-info-url http://www.example.com/proxy-service.html # -# The re_filterfile contains content modification rules. These rules -# permit powerful changes on the content of Web pages, e.g., you -# could disable your favourite JavaScript annoyances, rewrite the -# actual content, or just have some fun replacing "Microsoft" -# with "Microsuck" wherever it appears on a Web page. +# 2. CONFIGURATION AND LOG FILE LOCATIONS +# ======================================= # -# Default: No content modification. +# Privoxy can (and normally does) use a number of other files for +# additional configuration, help and logging. This section of the +# configuration file tells Privoxy where to find those other files. +# +# The user running Privoxy, must have read permission for all +# configuration files, and write permission to any files that would +# be modified, such as log files and actions files. # -re_filterfile ./re_filterfile # -# The logfile is where all logging and error messages are written. -# The logfile can be useful for tracking down a problem with -# Junkbuster (e.g., it's not blocking an ad you think it should -# block) but in most cases you probably will never look at it. +# 2.1. confdir +# ============ +# +# Specifies: +# +# The directory where the other configuration files are located +# +# Type of value: +# +# Path name +# +# Default value: # -# Your logfile will grow indefinitely, and you will probably want to -# periodically remove it. On Unix systems, you can do this with a -# cron job (see 'man cron'). +# /etc/privoxy (Unix) or Privoxy installation dir (Windows) # -# On SuSE Linux systems, you can place a line like -# "/var/log/junkbuster.* +1024k 644 nobody.nogroup" in /etc/logfiles, -# with the effect that cron.daily will automatically archive, gzip, -# and empty the log, when it exceeds 1M size. +# Effect if unset: # -# Default: Log to the standard error channel, not to a file +# Mandatory # -logfile ./junkbuster.log +# Notes: +# +# No trailing "/", please +# +# When development goes modular and multi-user, the blocker, +# filter, and per-user config will be stored in subdirectories of +# "confdir". For now, the configuration directory structure is +# flat, except for confdir/templates, where the HTML templates +# for CGI output reside (e.g. Privoxy's 404 error page). +# +confdir . # -# The jarfile defines where Junkbuster stores the cookies it -# intercepts. Note that if you use a jarfile, it may grow quite -# large. +# 2.2. logdir +# =========== +# +# Specifies: +# +# The directory where all logging takes place (i.e. where logfile +# and jarfile are located) # -# Default: Don't store intercepted cookies +# Type of value: # -#jarfile ./jarfile +# Path name +# +# Default value: +# +# /var/log/privoxy (Unix) or Privoxy installation dir (Windows) +# +# Effect if unset: +# +# Mandatory +# +# Notes: +# +# No trailing "/", please +# +logdir . # -# The forwardfile defines domain-specific forwarding of HTTP -# requests. In some cases, you may want Junkbuster to forward your -# request to another proxy instead of trying to fetch the request -# itself. In those cases, you can use the forwardfile to indicate -# which requests should be forwarded and to where. +# 2.3. actionsfile +# ================ +# +# Specifies: +# +# The actions file(s) to use +# +# Type of value: # -# Default: Make all connections directly. +# File name, relative to confdir, without the .action suffix # -forwardfile ./forward +# Default values: +# +# standard # Internal purposes, no editing recommended +# +# default # Main actions file +# +# user # User customizations +# +# Effect if unset: +# +# No actions are taken at all. Simple neutral proxying. +# +# Notes: +# +# Multiple actionsfile lines are permitted, and are in fact +# recommended! +# +# The default values include standard.action, which is used +# for internal purposes and should be loaded, default.action, +# which is the "main" actions file maintained by the developers, +# and user.action, where you can make your personal additions. +# +# Actions files are where all the per site and per URL +# configuration is done for ad blocking, cookie management, +# privacy considerations, etc. There is no point in using Privoxy +# without at least one actions file. +# +actionsfile standard # Internal purpose, recommended +actionsfile default # Main actions file +actionsfile user # User customizations # -# Generally, Junkbuster is used as a personal proxy. The default -# behaviour of Junkbuster is to listen on port 8000 on the "loopback" -# interface, so that it will only listen to local requests from the -# same machine. Using 'listen-address' (see below) you can serve -# requests from other machines as well. +# 2.4. filterfile +# =============== +# +# Specifies: +# +# The filter file(s) to use +# +# Type of value: +# +# File name, relative to confdir +# +# Default value: +# +# default.filter (Unix) or default.filter.txt (Windows) +# +# Effect if unset: +# +# No textual content filtering takes place, i.e. all +filter{name} +# actions in the actions files are turned neutral. +# +# Notes: +# +# Multiple filterfile lines are permitted. +# +# The filter files contain content modification rules that use +# regular expressions. These rules permit powerful changes on +# the content of Web pages, and optionally the headers as well, +# e.g., you could disable your favorite JavaScript annoyances, +# re-write the actual displayed text, or just have some fun +# playing buzzword bingo with web pages. # -# In that case, it is a wise thing to define access control lists -# (acls), which state who can connect to your proxy and what service -# they will be given. Note that setting the listen-address to an IP -# address that is only internally reachable from your local network -# might already do the trick. +# The +filter{name} actions rely on the relevant filter (name) +# to be defined in a filter file! # -# Default: No access control. Everybody that can reach junkbuster -# will be served. +# A pre-defined filter file called default.filter that contains a +# number of useful filters for common problems is included in the +# distribution. See the section on the filter action for a list. # -#aclfile ./aclfile +# It is recommended to place any locally adapted filters into a +# separate file, such as user.filter. +# +filterfile default.filter +#filterfile user.filter # User customizations # -# 4. OPTIONS +# 2.5. logfile +# ============ +# +# Specifies: +# +# The log file to use +# +# Type of value: +# +# File name, relative to logdir +# +# Default value: +# +# logfile (Unix) or privoxy.log (Windows) +# +# Effect if unset: +# +# No log file is used, all log messages go to the console (STDERR). +# +# Notes: +# +# The logfile is where all logging and error messages are +# written. The level of detail and number of messages are set with +# the debug option (see below). The logfile can be useful for +# tracking down a problem with Privoxy (e.g., it's not blocking +# an ad you think it should block) but in most cases you probably +# will never look at it. # -# This part of the configuration file contains options that control -# how Junkbuster operates. +# Your logfile will grow indefinitely, and you will probably +# want to periodically remove it. On Unix systems, you can do +# this with a cron job (see "man cron"). For Red Hat, a logrotate +# script has been included. # +# On SuSE Linux systems, you can place a line like +# "/var/log/privoxy.* +1024k 644 nobody.nogroup" in /etc/logfiles, +# with the effect that cron.daily will automatically archive, +# gzip, and empty the log, when it exceeds 1M size. +# +# Any log files must be writable by whatever user Privoxy is +# being run as (default on UNIX, user id is "privoxy"). +# +logfile logfile # -# Listen-address specifies the address and port where Junkbuster will -# listen for connections from your Web browser. The default is to -# listen on the local host on port 8000, and this is suitable for -# most users. (In your web browser, under proxy configuration, list -# the proxy server as 'localhost' and the port as '8000'). -# -# If you already have another service running on port 8000, or if you -# want to serve requests from other machines (e.g. on your local -# network) as well, you will need to override the default. The syntax -# is "listen-address []:" If you leave out the ip -# adress, junkbuster will bind to all interfaces (addresses) on your -# machine and may become reachable from the internet. In that case, -# consider using access control lists (acl's) (see "aclfile" above). +# 2.6. jarfile +# ============ +# +# Specifies: +# +# The file to store intercepted cookies in +# +# Type of value: # -# For example, suppose you are running Junkbuster on a machine which -# has the address 192.168.0.1 on your local private network -# (192.168.0.0) and has another outside connection with a different -# address. You want it to serve requests from inside only: +# File name, relative to logdir # -# listen-address 192.168.0.1:8000 +# Default value: # -# If you want it to listen on all addresses (including the outside -# connection): +# Unset (commented out). When activated: jarfile (Unix) or +# privoxy.jar (Windows) # -# listen-address :8000 +# Effect if unset: # -# If you do this, consider using acls (see "aclfile" above). +# Intercepted cookies are not stored in a dedicated log file. # -# Note: you will need to point your browser(s) to the address -# and port that you have configured here. +# Notes: # -# Default: listen-address localhost:8000 -# listen-address 127.0.0.1:8000 +# The jarfile may grow to ridiculous sizes over time. # +# If debug 8 (show header parsing) is enabled, cookies are written +# to the logfile with the rest of the headers. +# +#jarfile jarfile +# +# 2.7. trustfile +# ============== +# +# Specifies: +# +# The trust file to use +# +# Type of value: +# +# File name, relative to confdir +# +# Default value: +# +# Unset (commented out). When activated: trust (Unix) or trust.txt +# (Windows) +# +# Effect if unset: +# +# The entire trust mechanism is turned off. +# +# Notes: +# +# The trust mechanism is an experimental feature for building +# white-lists and should be used with care. It is NOT recommended +# for the casual user. +# +# If you specify a trust file, Privoxy will only allow access to +# sites that are specified in the trustfile. Sites can be listed +# in one of two ways: +# +# Prepending a ~ character limits access to this site only (and +# any sub-paths within this site), e.g. ~www.example.com. +# +# Or, you can designate sites as trusted referrers, by prepending +# the name with a + character. The effect is that access to +# untrusted sites will be granted -- but only if a link from this +# trusted referrer was used. The link target will then be added +# to the "trustfile" so that future, direct accesses will be +# granted. Sites added via this mechanism do not become trusted +# referrers themselves (i.e. they are added with a ~ designation). +# +# If you use the + operator in the trust file, it may grow +# considerably over time. +# +# It is recommended that Privoxy be compiled with the +# --disable-force, --disable-toggle and --disable-editor options, +# if this feature is to be used. +# +# Possible applications include limiting Internet access for +# children. +# +#trustfile trust + +# +# 3. DEBUGGING +# ============ +# +# These options are mainly useful when tracing a problem. Note that +# you might also want to invoke Privoxy with the --no-daemon command +# line option when debugging. +# # -# The debug option sets the level of debugging information to log in -# the logfile (and to the console in the Windows version). A debug -# level of 1 is informative because it will show you each request as -# it happens. Higher levels of debug are probably only of interest -# to developers. +# 3.1. debug +# ========== +# +# Specifies: # -# debug 1 # GPC = show each GET/POST/CONNECT request -# debug 2 # CONN = show each connection status -# debug 4 # IO = show I/O status -# debug 8 # HDR = show header parsing -# debug 16 # LOG = log all data into the logfile -# debug 32 # FRC = debug force feature -# debug 64 # REF = debug regular expression filter -# debug 128 # RED = debug fast redirects -# debug 256 # CLF = Common Log Format -# debug 4096 # INFO = Startup banner and warnings. -# debug 8192 # ERROR = Non-fatal errors +# Key values that determine what information gets logged to +# the logfile. # -# It is *highly recommended* that you enable ERROR -# reporting. (debug 8192). +# Type of value: # -# The reporting of FATAL errors (i.e. ones which crash -# JunkBuster) is always on and cannot be disabled. +# Integer values # -# If you want to use CLF, you should set "debug 256" ONLY, -# do not enable anything else. +# Default value: # -# Multiple "debug" directives, are OK - they're logical-OR'd -# together. +# 12289 (i.e.: URLs plus informational and warning messages) # -# debug 15 # same as setting the first 4 listed above +# Effect if unset: # -# Default: 0, i.e. log nothing but fatal errors +# Nothing gets logged. # -debug 1 # URLs -debug 4096 # Info +# Notes: +# +# The available debug levels are: +# +# debug 1 # show each GET/POST/CONNECT request +# debug 2 # show each connection status +# debug 4 # show I/O status +# debug 8 # show header parsing +# debug 16 # log all data into the logfile +# debug 32 # debug force feature +# debug 64 # debug regular expression filter +# debug 128 # debug fast redirects +# debug 256 # debug GIF de-animation +# debug 512 # Common Log Format +# debug 1024 # debug kill pop-ups +# debug 2048 # CGI user interface +# debug 4096 # Startup banner and warnings. +# debug 8192 # Non-fatal errors +# +# To select multiple debug levels, you can either add them or +# use multiple debug lines. +# +# A debug level of 1 is informative because it will show you each +# request as it happens. 1, 4096 and 8192 are highly recommended +# so that you will notice when things go wrong. The other levels +# are probably only of interest if you are hunting down a specific +# problem. They can produce a hell of an output (especially 16). +# +# The reporting of fatal errors (i.e. ones which crash Privoxy) +# is always on and cannot be disabled. +# +# If you want to use CLF (Common Log Format), you should set +# "debug 512" ONLY and not enable anything else. +# +debug 1 # show each GET/POST/CONNECT request +debug 4096 # Startup banner and warnings debug 8192 # Errors - *we highly recommended enabling this* # -# Junkbuster normally uses "multi-threading", a software technique -# that permits it to handle many different requests simultaneously. -# In some cases you may wish to disable this -- particularly if -# you're trying to debug a problem. The 'single-threaded' option -# forces Junkbuster to handle requests sequentially. +# 3.2. single-threaded +# ==================== # -# Default: Multithreaded mode +# Specifies: +# +# Whether to run only one server thread +# +# Type of value: +# +# None +# +# Default value: +# +# Unset +# +# Effect if unset: +# +# Multi-threaded (or, where unavailable: forked) operation, +# i.e. the ability to serve multiple requests simultaneously. +# +# Notes: +# +# This option is only there for debug purposes and you should +# never need to use it. It will drastically reduce performance. # #single-threaded # -# 'toggle' allows you to temporarily disable all Junkbuster's -# filtering. Just set "toggle 0". -# -# The Windows version of Junkbuster puts an icon in the system -# tray, which allows you to change this option without having -# to edit this file. If you right-click on that icon (or select -# the 'Options' menu), one choice is "Enable". Clicking on enable -# toggles Junkbuster on and off. This is useful if you want to -# temporarily disable Junkbuster, e.g., to access a site that -# requires cookies which you normally have blocked. +# 4. ACCESS CONTROL AND SECURITY +# ============================== +# +# This section of the config file controls the security-relevant +# aspects of Privoxy's configuration. +# + +# +# 4.1. listen-address +# =================== +# +# Specifies: +# +# The IP address and TCP port on which Privoxy will listen for +# client requests. +# +# Type of value: +# +# [IP-Address]:Port +# +# Default value: +# +# 127.0.0.1:8118 +# +# Effect if unset: # -# 'toggle 1' means Junkbuster runs normally, 'toggle 0' means -# that Junkbuster becomes a non-anonymizing non-blocking -# proxy. +# Bind to 127.0.0.1 (localhost), port 8118. This is suitable and +# recommended for home users who run Privoxy on the same machine +# as their browser. # -# Default: 1 +# Notes: # -toggle 1 +# You will need to configure your browser(s) to this proxy address +# and port. +# +# If you already have another service running on port 8118, or +# if you want to serve requests from other machines (e.g. on your +# local network) as well, you will need to override the default. +# +# If you leave out the IP address, Privoxy will bind to all +# interfaces (addresses) on your machine and may become reachable +# from the Internet. In that case, consider using access control +# lists (ACL's, see below), and/or a firewall. +# +# If you open Privoxy to untrusted users, you will also want +# to turn off the enable-edit-actions and enable-remote-toggle +# options! +# +# Example: +# +# Suppose you are running Privoxy on a machine which has the +# address 192.168.0.1 on your local private network (192.168.0.0) +# and has another outside connection with a different address. You +# want it to serve requests from inside only: +# +# listen-address 192.168.0.1:8118 +# +listen-address 127.0.0.1:8118 # -# 5. WINDOWS GUI OPTIONS +# 4.2. toggle +# =========== # -# Junkbuster has a number of options specific to the Windows GUI -# interface: +# Specifies: +# +# Initial state of "toggle" status +# +# Type of value: +# +# 1 or 0 +# +# Default value: +# +# 1 +# +# Effect if unset: +# +# Act as if toggled on +# +# Notes: +# +# If set to 0, Privoxy will start in "toggled off" mode, +# i.e. behave like a normal, content-neutral proxy where all ad +# blocking, filtering, etc are disabled. See enable-remote-toggle +# below. This is not really useful anymore, since toggling is +# much easier via the web interface than via editing the conf file. +# +# The windows version will only display the toggle icon in the +# system tray if this option is present. +# +toggle 1 + +# +# 4.3. enable-remote-toggle +# ========================= +# +# Specifies: +# +# Whether or not the web-based toggle feature may be used +# +# Type of value: +# +# 0 or 1 +# +# Default value: +# +# 1 +# +# Effect if unset: +# +# The web-based toggle feature is disabled. +# +# Notes: +# +# When toggled off, Privoxy acts like a normal, content-neutral +# proxy, i.e. it acts as if none of the actions applied to +# any URL. +# +# For the time being, access to the toggle feature can not be +# controlled separately by "ACLs" or HTTP authentication, so that +# everybody who can access Privoxy (see "ACLs" and listen-address +# above) can toggle it for all users. So this option is not +# recommended for multi-user environments with untrusted users. +# +# Note that you must have compiled Privoxy with support for this +# feature, otherwise this option has no effect. +# +enable-remote-toggle 1 + +# +# 4.4. enable-remote-http-toggle +# ============================== +# +# Specifies: +# +# Whether or not Privoxy recognizes special HTTP headers to change +# its behaviour. +# +# Type of value: +# +# 0 or 1 +# +# Default value: +# +# 1 +# +# Effect if unset: +# +# Privoxy ignores special HTTP headers. +# +# Notes: +# +# When toggled on, the client can change Privoxy's behaviour by +# setting special HTTP headers. Currently the only supported +# special header is "X-Filter: No", to disable filtering for +# the ongoing request, even if it is enabled in one of the +# action files. +# +# If you are using Privoxy in a multi-user environment or with +# untrustworthy clients and want to enforce filtering, you will +# have to disable this option, otherwise you can ignore it. +# +enable-remote-http-toggle 1 + +# +# 4.5. enable-edit-actions +# ======================== +# +# Specifies: +# +# Whether or not the web-based actions file editor may be used +# +# Type of value: +# +# 0 or 1 +# +# Default value: +# +# 1 +# +# Effect if unset: +# +# The web-based actions file editor is disabled. +# +# Notes: +# +# For the time being, access to the editor can not be controlled +# separately by "ACLs" or HTTP authentication, so that everybody +# who can access Privoxy (see "ACLs" and listen-address above) +# can modify its configuration for all users. So this option is +# not recommended for multi-user environments with untrusted users. +# +# Note that you must have compiled Privoxy with support for this +# feature, otherwise this option has no effect. +# +enable-edit-actions 1 + +# +# 4.6. ACLs: permit-access and deny-access +# ======================================== +# +# Specifies: +# +# Who can access what. +# +# Type of value: +# +# src_addr[/src_masklen] [dst_addr[/dst_masklen]] +# +# Where src_addr and dst_addr are IP addresses in dotted decimal +# notation or valid DNS names, and src_masklen and dst_masklen are +# subnet masks in CIDR notation, i.e. integer values from 2 to 30 +# representing the length (in bits) of the network address. The +# masks and the whole destination part are optional. +# +# Default value: +# +# Unset +# +# Effect if unset: +# +# Don't restrict access further than implied by listen-address +# +# Notes: +# +# Access controls are included at the request of ISPs and systems +# administrators, and are not usually needed by individual +# users. For a typical home user, it will normally suffice to +# ensure that Privoxy only listens on the localhost (127.0.0.1) +# or internal (home) network address by means of the listen-address +# option. +# +# Please see the warnings in the FAQ that this proxy is not +# intended to be a substitute for a firewall or to encourage +# anyone to defer addressing basic security weaknesses. +# +# Multiple ACL lines are OK. If any ACLs are specified, then +# the Privoxy talks only to IP addresses that match at least one +# permit-access line and don't match any subsequent deny-access +# line. In other words, the last match wins, with the default +# being deny-access. +# +# If Privoxy is using a forwarder (see forward below) for a +# particular destination URL, the dst_addr that is examined is +# the address of the forwarder and NOT the address of the ultimate +# target. This is necessary because it may be impossible for the +# local Privoxy to determine the IP address of the ultimate target +# (that's often what gateways are used for). +# +# You should prefer using IP addresses over DNS names, because +# the address lookups take time. All DNS names must resolve! You +# can not use domain patterns like "*.org" or partial domain +# names. If a DNS name resolves to multiple IP addresses, only +# the first one is used. +# +# Denying access to particular sites by ACL may have undesired +# side effects if the site in question is hosted on a machine +# which also hosts other sites. +# +# Examples: +# +# Explicitly define the default behavior if no ACL and +# listen-address are set: "localhost" is OK. The absence of a +# dst_addr implies that all destination addresses are OK: +# +# permit-access localhost # -# activity-animation {1 or 0} +# Allow any host on the same class C subnet as www.privoxy.org +# access to nothing but www.example.com: # -# If set to 1, the Junkbuster icon will animate when Junkbuster is -# active. +# permit-access www.privoxy.org/24 www.example.com/32 +# +# Allow access from any host on the 26-bit subnet 192.168.45.64 +# to anywhere, with the exception that 192.168.45.73 may not +# access www.dirty-stuff.example.com: +# +# permit-access 192.168.45.64/26 +# deny-access 192.168.45.73 www.dirty-stuff.example.com # -#Win32-only: activity-animation 1 -# log-messages {1 or 0} # -# If set to 1, Junkbuster will log messages to the console window. +# 4.7. buffer-limit +# ================= +# +# Specifies: +# +# Maximum size of the buffer for content filtering. +# +# Type of value: +# +# Size in Kbytes +# +# Default value: +# +# 4096 +# +# Effect if unset: +# +# Use a 4MB (4096 KB) limit. +# +# Notes: # -#Win32-only: log-messages 1 +# For content filtering, i.e. the +filter and +deanimate-gif +# actions, it is necessary that Privoxy buffers the entire document +# body. This can be potentially dangerous, since a server could +# just keep sending data indefinitely and wait for your RAM to +# exhaust -- with nasty consequences. Hence this option. +# +# When a document buffer size reaches the buffer-limit, it is +# flushed to the client unfiltered and no further attempt to filter +# the rest of the document is made. Remember that there may be +# multiple threads running, which might require up to buffer-limit +# Kbytes each, unless you have enabled "single-threaded" above. +# +buffer-limit 4096 -# log-buffer-size {1 or 0}? # -# If log-buffer-size is set to 1, the size of the log buffer, that -# is the amount of memory used for the log messages displayed in -# the console window, will be limited to 'log-max-lines' (see below). +# 5. FORWARDING +# ============= +# +# This feature allows routing of HTTP requests through a chain +# of multiple proxies. It can be used to better protect privacy +# and confidentiality when accessing specific domains by routing +# requests to those domains through an anonymous public proxy (see +# e.g. http://www.multiproxy.org/anon_list.htm) Or to use a caching +# proxy to speed up browsing. Or chaining to a parent proxy may be +# necessary because the machine that Privoxy runs on has no direct +# Internet access. # -# Warning: Setting this to 0 will result in the buffer to grow -# infinitely and eat up all your memory! +# Also specified here are SOCKS proxies. Privoxy supports the SOCKS +# 4 and SOCKS 4A protocols. # -#Win32-only: log-buffer-size 1 -# log-max-lines {number of lines, e.g., '200'} # -# Maximum number of lines held in the log buffer. See above. +# 5.1. forward +# ============ +# +# Specifies: +# +# To which parent HTTP proxy specific requests should be routed. +# +# Type of value: +# +# target_pattern http_parent[:port] +# +# where target_pattern is a URL pattern that specifies to which +# requests (i.e. URLs) this forward rule shall apply. Use / +# to denote "all URLs". http_parent[:port] is the DNS name or +# IP address of the parent HTTP proxy through which the requests +# should be forwarded, optionally followed by its listening port +# (default: 8080). Use a single dot (.) to denote "no forwarding". +# +# Default value: +# +# Unset +# +# Effect if unset: +# +# Don't use parent HTTP proxies. +# +# Notes: +# +# If http_parent is ".", then requests are not forwarded to +# another HTTP proxy but are made directly to the web servers. +# +# Multiple lines are OK, they are checked in sequence, and the +# last match wins. +# +# Examples: +# +# Everything goes to an example anonymizing proxy, except SSL on +# port 443 (which it doesn't handle): +# +# forward / anon-proxy.example.org:8080 +# forward :443 . +# +# Everything goes to our example ISP's caching proxy, except for +# requests to that ISP's sites: +# +# forward / caching-proxy.example-isp.net:8000 +# forward .example-isp.net . # -#Win32-only: log-max-lines 200 -# log-highlight-messages {1 or 0} # -# If set to 1, Junkbuster will highlight portions of the log -# messages with a bold-faced font. +# 5.2. forward-socks4 and forward-socks4a +# ======================================= +# +# Specifies: +# +# Through which SOCKS proxy (and to which parent HTTP proxy) +# specific requests should be routed. +# +# Type of value: +# +# target_pattern socks_proxy[:port] http_parent[:port] +# +# where target_pattern is a URL pattern that specifies to which +# requests (i.e. URLs) this forward rule shall apply. Use / to +# denote "all URLs". http_parent and socks_proxy are IP addresses +# in dotted decimal notation or valid DNS names (http_parent may +# be "." to denote "no HTTP forwarding"), and the optional port +# parameters are TCP ports, i.e. integer values from 1 to 64535 +# +# Default value: +# +# Unset +# +# Effect if unset: +# +# Don't use SOCKS proxies. +# +# Notes: +# +# Multiple lines are OK, they are checked in sequence, and the +# last match wins. +# +# The difference between forward-socks4 and forward-socks4a +# is that in the SOCKS 4A protocol, the DNS resolution of the +# target hostname happens on the SOCKS server, while in SOCKS 4 +# it happens locally. +# +# If http_parent is ".", then requests are not forwarded to another +# HTTP proxy but are made (HTTP-wise) directly to the web servers, +# albeit through a SOCKS proxy. +# +# Examples: +# +# From the company example.com, direct connections are made to all +# "internal" domains, but everything outbound goes through their +# ISP's proxy by way of example.com's corporate SOCKS 4A gateway +# to the Internet. +# +# forward-socks4a / socks-gw.example.com:1080 www-cache.example-isp.net:8080 +# forward .example.com . +# +# A rule that uses a SOCKS 4 gateway for all destinations but no +# HTTP parent looks like this: +# +# forward-socks4 / socks-gw.example.com:1080 . +# +# To chain Privoxy and Tor, both running on the same system, +# you should use the rule: +# +# forward-socks4a / 127.0.0.1:9050 . +# +# The public Tor network can't be used to reach your local network, +# therefore it's a good idea to make some exceptions: +# +# forward 192.168.*.*/ . +# forward 10.*.*.*/ . +# forward 127.*.*.*/ . +# +# Unencrypted connections to systems in these address ranges will +# be as (un)secure as the local network is, but the alternative is +# that you can't reach the network at all. +# +# If you also want to be able to reach servers in your local +# network by using their names, you will need additional +# exceptions that look like this: +# +# forward localhost/ . # -#Win32-only: log-highlight-messages 1 -# log-font-name {font name, e.g., 'Comic Sans MS'} # -# The font used in the console window. +# 5.3. forwarded-connect-retries +# ============================== +# +# Specifies: +# +# How often Privoxy retries if a forwarded connection request +# fails. +# +# Type of value: +# +# Number of retries. +# +# Default value: +# +# 0 +# +# Effect if unset: # -#Win32-only: log-font-name Comic Sans MS +# Forwarded connections are treated like direct connections and +# no retry attempts are made. +# +# Notes: +# +# forwarded-connect-retries is mainly interesting for socks4a +# connections, where Privoxy can't detect why the connections +# failed. The connection might have failed because of a DNS timeout +# in which case a retry makes sense, but it might also have failed +# because the server doesn't exist or isn't reachable. In this +# case the retry will just delay the appearance of Privoxy's +# error message. +# +# Only use this option, if you are getting many forwarding related +# error messages, that go away when you try again manually. Start +# with a small value and check Privoxy's logfile from time to time, +# to see how many retries are usually needed. +# +# Examples: +# +# forwarded-connect-retries 1 +# +forwarded-connect-retries 0 + +# +# 6. WINDOWS GUI OPTIONS +# ====================== +# +# Privoxy has a number of options specific to the Windows GUI +# interface: +# + +# If "activity-animation" is set to 1, the Privoxy icon will animate +# when "Privoxy" is active. To turn off, set to 0. +# +#activity-animation 1 + +# If "log-messages" is set to 1, Privoxy will log messages to the +# console window: +# +#log-messages 1 -# log-font-size {font size in points, e.g., '8'} +# If "log-buffer-size" is set to 1, the size of the log buffer, +# i.e. the amount of memory used for the log messages displayed in +# the console window, will be limited to "log-max-lines" (see below). # -# Font size used in the console window. +# Warning: Setting this to 0 will result in the buffer to grow +# infinitely and eat up all your memory! # -#Win32-only: log-font-size 8 +#log-buffer-size 1 -# show-on-task-bar {1 or 0} +# log-max-lines is the maximum number of lines held in the log +# buffer. See above. # -# Controls whether or not Junkbuster will appear as a button on the Task -# bar when minimized. +#log-max-lines 200 + +# If "log-highlight-messages" is set to 1, Privoxy will highlight +# portions of the log messages with a bold-faced font: # -#Win32-only: show-on-task-bar 0 +#log-highlight-messages 1 +# The font used in the console window: +# +#log-font-name Comic Sans MS -# close-button-minimizes 1 +# Font size used in the console window: # -# If set, the Windows close button will minimize Junkbuster instead -# of closing the program (close with the exit option on the File -# menu). +#log-font-size 8 + +# "show-on-task-bar" controls whether or not Privoxy will appear as +# a button on the Task bar when minimized: # -#Win32-only: close-button-minimizes 1 +#show-on-task-bar 0 -# hide-console +# If "close-button-minimizes" is set to 1, the Windows close button +# will minimize Privoxy instead of closing the program (close with +# the exit option on the File menu). # -# If this option is used, Junkbuster will disconnect from and hide -# the command console. +#close-button-minimizes 1 + +# The "hide-console" option is specific to the MS-Win console version +# of Privoxy. If this option is used, Privoxy will disconnect from +# and hide the command console. # -#Win32-only: #hide-console +#hide-console -# Note: Junkbuster is distributed under the GNU General Public License (GPL) -# For details, see http://www.gnu.org/copyleft/gpl.html +#