X-Git-Url: http://www.privoxy.org/gitweb/?p=privoxy.git;a=blobdiff_plain;f=GNUmakefile.in;h=fe5d15f6180ae0f9cf17ef64033fd956bd953d04;hp=04933670aab9a9d37feb522799128ca0ecda3a2e;hb=4880f78d657e6f68dfbde5ffafd026049cb3c216;hpb=061a6415261830282bd38413c631708e47d4cfef diff --git a/GNUmakefile.in b/GNUmakefile.in index 04933670..fe5d15f6 100644 --- a/GNUmakefile.in +++ b/GNUmakefile.in @@ -1,9 +1,9 @@ # Note: Makefile is built automatically from Makefile.in # -# $Id: GNUmakefile.in,v 1.8 2002/03/05 14:07:42 morcego Exp $ +# $Id: GNUmakefile.in,v 1.120 2002/10/10 20:39:27 dessent Exp $ # # Written by and Copyright (C) 2001 the SourceForge -# IJBSWA team. http://ijbswa.sourceforge.net +# Privoxy team. http://www.privoxy.org/ # # Based on the Internet Junkbuster originally written # by and Copyright (C) 1997 Anonymous Coders and @@ -27,7 +27,1441 @@ # or write to the Free Software Foundation, Inc., 59 # Temple Place - Suite 330, Boston, MA 02111-1307, USA. # + +############################################################################# +# Set make command correctly +############################################################################# +@SET_MAKE@ + +############################################################################# +# Version number (for RPM) +############################################################################# + +VERSION_MAJOR = @VERSION_MAJOR@ +VERSION_MINOR = @VERSION_MINOR@ +VERSION_POINT = @VERSION_POINT@ +CODE_STATUS = @CODE_STATUS@ +VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT) +RPM_VERSION = $(VERSION) +RPM_PACKAGEV = "" +SNAPVERSION = $(RPM_VERSION)-$(shell date "+%Y%m%d") + + +############################################################################# +# Source directories +############################################################################# +DIR_PRIVOXY_ROOT := . +DIR_PRIVOXY_SRC := $(DIR_PRIVOXY_ROOT)/src +DIR_PRIVOXY_SRC_PCRE := $(DIR_PRIVOXY_ROOT)/pcre +DIR_PRIVOXY_OBJ := $(DIR_PRIVOXY_ROOT)/obj + +############################################################################# +# Directories for "make install" +############################################################################# + +prefix = @prefix@ +exec_prefix = @exec_prefix@ +CONF_BASE = @sysconfdir@ +SBIN_DEST = @sbindir@ +MAN_DIR = @mandir@ +MAN_DEST = $(MAN_DIR)/man1 +SHARE_DEST = @datadir@ +DOC_DEST = $(SHARE_DEST)/doc/privoxy +VAR_DEST = @localstatedir@ +LOGS_DEST = $(VAR_DEST)/log/privoxy +PIDS_DEST = $(VAR_DEST)/run + +# if $prefix = /usr/local then the default CONFDEST change from +# CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy +# by the target rule CONF_DEST +# +# also if the $prefix is /usr/local and there is no +# $(SHARE_DEST)/doc, it checks for $prefix/doc and installs there +# instead in this situation +# +# finally if $prefix=/usr/local and VAR_DEST=$prefix/var it +# changes this to /var for storing the logs and pidfile + +# used in source dir only, the install goes to $share_dest/doc/privoxy +DOK_WEB_USEM = doc/webserver/user-manual + +############################################################################# +# Build tools +############################################################################# + +PROGRAM = privoxy@EXEEXT@ +CC = @CC@ +ECHO = echo +GZIP_PROG = gzip +INSTALL = @INSTALL@ +INSTALL_P = -m 0755 +INSTALL_T = -m 0644 +INSTALL_D = -m 0755 -d +# install options for superuser install +#INSTALL_S = -g @GROUP@ -o @USER@ +ID = id -u +LD = @CC@ +RM = rm -f +RMDIR = rmdir +MKDIR = ./mkinstalldirs +STRIP_PROG = strip +SED = sed +GREP = grep +CAT = cat +RPM = rpm +MV = mv +TAR = tar +LN = ln +TOUCH = touch +KILL = kill +CHMOD = chmod +CHOWN = chown +WDUMP = @WDUMP@ -dump +JADECAT = @JADECAT@ +JADEBIN = @JADEBIN@ +DOC_STATUS = @DOC_STATUS@ +# Note: Please make sure that -d ldp.dsl\#html stays the last option to +# $(JADEBIN), because for some targets "-notoc" will be appended +# to it (--> "ldp.dsl\#html-notoc"). +DB = $(JADEBIN) $(JADECAT) -i$(DOC_STATUS) -ihtml -t sgml -D.. -d ldp.dsl\#html +MAN2HTML = @MAN2HTML@ +G2H_CMD = groff -mandoc -Thtml +TARGET_OS = @host@ +PERL = perl +DOC_DIR = doc/source +DOC_TMP = $(DOC_DIR)/tmp +DKPREFIX = @DKPREFIX@ + +#User Group paras +USER = @USER@ +GROUP = @GROUP@ + +# Program to do LF->CRLF +# +# The sed version should be the most portable, but it doesn't work for me, +# the other two do. FIXME. +# - Jon +#DOSFILTER = $(SED) -e $$'s,$$,\r,' +#DOSFILTER = gawk -v ORS='\r\n' '{print $0;}' +DOSFILTER = $(PERL) -p -e 's/\n/\r\n/' + +############################################################################# +# Setup for make distribution rh and suse for now +############################################################################# + +TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz +RPM_BASE = @RPM_BASE@ + +############################################################################# +# We include these files in our distributions +############################################################################# +# take care that no CVS .cvsignore or other crappy files +# are included here +# and escape every '#' in the find. doh. +CONFIG_FILES = config trust \ + default.action \ + standard.action user.action \ + default.filter \ + `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` + +DOC_FILES = AUTHORS LICENSE README ChangeLog \ + `find doc/text/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` \ + `find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \ + `find doc/webserver/ -name "*.css"` \ + privoxy.1 + +############################################################################# +# Filenames and libraries +############################################################################# + +C_SRC = \ + $(DIR_PRIVOXY_SRC)/actions.c \ + $(DIR_PRIVOXY_SRC)/cgi.c \ + $(DIR_PRIVOXY_SRC)/cgiedit.c \ + $(DIR_PRIVOXY_SRC)/cgisimple.c \ + $(DIR_PRIVOXY_SRC)/deanimate.c \ + $(DIR_PRIVOXY_SRC)/encode.c \ + $(DIR_PRIVOXY_SRC)/errlog.c \ + $(DIR_PRIVOXY_SRC)/filters.c \ + $(DIR_PRIVOXY_SRC)/gateway.c \ + $(DIR_PRIVOXY_SRC)/jbsockets.c \ + $(DIR_PRIVOXY_SRC)/jcc.c \ + $(DIR_PRIVOXY_SRC)/killpopup.c \ + $(DIR_PRIVOXY_SRC)/list.c \ + $(DIR_PRIVOXY_SRC)/loadcfg.c \ + $(DIR_PRIVOXY_SRC)/loaders.c \ + $(DIR_PRIVOXY_SRC)/miscutil.c \ + $(DIR_PRIVOXY_SRC)/parsers.c \ + $(DIR_PRIVOXY_SRC)/ssplit.c \ + $(DIR_PRIVOXY_SRC)/urlmatch.c + +C_OBJS = $(C_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@) +C_HDRS = $(C_SRC:.c=.h) $(DIR_PRIVOXY_SRC)/project.h $(DIR_PRIVOXY_SRC)/actionlist.h + +W32_SRC = @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.c $(DIR_PRIVOXY_SRC)/w32taskbar.c $(DIR_PRIVOXY_SRC)/win32.c +W32_FILES = @WIN_ONLY@$(DIR_PRIVOXY_OBJ)/w32res.res +W32_OBJS = @WIN_ONLY@$(W32_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@) $(W32_FILES) +W32_HDRS = @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/w32taskbar.h $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC)/w32res.h +W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32 +W32_INIS = @WIN_ONLY@config.txt trust.txt + +PCRS_SRC = @STATIC_PCRS_ONLY@$(DIR_PRIVOXY_SRC)/pcrs.c +PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@) +PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h) + +PCRE_SRC = @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/get.c $(DIR_PRIVOXY_SRC_PCRE)/maketables.c $(DIR_PRIVOXY_SRC_PCRE)/study.c $(DIR_PRIVOXY_SRC_PCRE)/pcre.c +PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:$(DIR_PRIVOXY_SRC_PCRE)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@) +PCRE_HDRS = @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/chartables.c $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h + +# No REGEX (maybe because dynamically linked pcreposix): +REGEX_SRC = +@STATIC_PCRE_ONLY@REGEX_SRC = $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.c + +REGEX_OBJS = $(REGEX_SRC:$(DIR_PRIVOXY_SRC_PCRE)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@) +REGEX_HDRS = $(REGEX_SRC:.c=.h) + +# Dependencies introduced by #include "project.h". +PROJECT_H_DEPS = $(DIR_PRIVOXY_SRC)/project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/pcre.h + +# Socket libraries for platforms that need them explicitly defined +SOCKET_LIB = @SOCKET_LIB@ + +# PThreads library, if needed. +PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@ + +SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC) +OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS) +HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS) +LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB) + + +############################################################################# +# Compiler switches +############################################################################# + +# The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build. +# The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a +# Win32 GUI build. +# The flag "-pthread" is required if using Pthreads under Linux (and +# possibly other OSs). +SPECIAL_CFLAGS = @SPECIAL_CFLAGS@ + +# Add your flags here +OTHER_CFLAGS = + +CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \ + @STATIC_PCRE_ONLY@ -Ipcre + +LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS) + + +############################################################################# +# Build section. +# +# There should NOT be any targets above this line. +############################################################################# +all: $(PROGRAM) default.action + + +############################################################################# +# Phony targets +############################################################################# +.PHONY: all inifiles redhat-dist redhat-upload redhat-test solaris-dist suse-dist \ +suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \ +install conectiva-spec conectiva-dist conectiva-upload debian-dist \ +debian-upload ensure-wdump ensure-jadebin ensure-dkprefix CONF_DEST LOG_DEST \ +PID_DEST check_doc install-strip + + +############################################################################# +# Compile command +############################################################################# +$(DIR_PRIVOXY_OBJ)/%.o: $(DIR_PRIVOXY_SRC)/%.c $(DIR_PRIVOXY_OBJ) + $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@ + +$(DIR_PRIVOXY_OBJ)/%.o: $(DIR_PRIVOXY_SRC_PCRE)/%.c $(DIR_PRIVOXY_OBJ) + $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@ + +$(DIR_PRIVOXY_OBJ): + $(MKDIR) obj + +############################################################################# +# Strip master copy comments from default.action: +############################################################################# +default.action: default.action.master + $(GREP) -v '^#MASTER#' $< > $@ + +############################################################################# +# Win32 config files +############################################################################# + +inifiles: $(W32_INIS) + +config.txt: config + $(SED) -e 's!\trustfile trust!trustfile trust.txt!' \ + -e 's!\jarfile jarfile!jarfile jar.log!' \ + -e 's!\logfile logfile!logfile privoxy.log!' \ + -e 's!#Win32-only: !!' \ + < $< | \ + $(DOSFILTER) > $@ + # LF to CRLF in default.action + $(DOSFILTER) default.action.txt && mv default.action.txt default.action + # LF to CRLF in default.filter + $(DOSFILTER) default.filter.txt && mv default.filter.txt default.filter + +trust.txt: trust + $(DOSFILTER) < $< > $@ + +############################################################################# +# Pre-dist check: +############################################################################# +dist-check: + @if [ -d CVS ]; then \ + $(ECHO) "***************************************************"; \ + $(ECHO) "*** ***"; \ + $(ECHO) "*** WARNING ***"; \ + $(ECHO) "*** ***"; \ + $(ECHO) "*** The presence of a CVS subdirectory suggests ***"; \ + $(ECHO) "*** that you are trying to build a distribution ***"; \ + $(ECHO) "*** package based on a checked out, not an ***"; \ + $(ECHO) "*** exported copy of the source tree. Please ***"; \ + $(ECHO) "*** see \"Releasing a new version\" in the ***"; \ + $(ECHO) "*** developer manual. ***"; \ + $(ECHO) "*** ***"; \ + $(ECHO) "***************************************************"; \ + $(ECHO) "Type \"yes i am sure\" if you are sure that you"; \ + $(ECHO) -n "really want to proceed: "; \ + read answer; \ + if [ "$$answer" != "yes i am sure" ]; then exit 1; fi \ + fi; + +############################################################################# +# create tar.gz from CVS: +# This make-target is usually called through 'create-archive'. If you +# run 'make create-snapshot' without setting SNAPVERSION, you'll get a +# tar.gz with the current date in the name and as a releasenumber in the +# spec-file. But the main usage is to run it as follows (Red Hat example): +# make SNAPVERSION=1.6x create-snapshot +# This creates a tar.gz and spec-file for a Red Hat 6.x version. +############################################################################# +create-snapshot: + @tag=`cvs -d $(CVSROOT) status Makefile | awk ' /Sticky Tag/ { print $$3 } '` 2> /dev/null; \ + [ x"$$tag" = x"(none)" ] && tag=HEAD; \ + echo "*** Creating package from $$tag!"; \ + cd $(TMPDIR) ; cvs -Q -d $(CVSROOT) export -r $$tag current || echo "Um... export aborted." + @cd $(TMPDIR)/current; \ + TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \ + if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \ + -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \ + privoxy-rh.spec > $$TMPFILE ; then \ + $(MV) -f $$TMPFILE privoxy-rh.spec; \ + else \ + $(ECHO) "Could not set version info in specfile."; \ + exit 1;\ + fi;\ + if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \ + -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \ + privoxy-suse.spec > $$TMPFILE ; then \ + $(MV) -f $$TMPFILE privoxy-suse.spec; \ + else \ + $(ECHO) "Could not set version info in specfile."; \ + exit 1;\ + fi; \ + $(RM) $(TMPFILE); \ + cd $(TMPDIR)/current; \ + $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude \ + "privoxy-suse.spec" -czf $(TMPDIR)/$(PROGRAM)-rh-$(VERSION).tar.gz .; \ + $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude \ + "privoxy-rh.spec" -czf $(TMPDIR)/$(PROGRAM)-suse-$(VERSION).tar.gz . + @$(MV) -f $(TMPDIR)/$(PROGRAM)-rh-$(VERSION).tar.gz . + @$(MV) -f $(TMPDIR)/$(PROGRAM)-suse-$(VERSION).tar.gz . + @$(RM) -rf $(TMPDIR) + @echo "Resulting files are $(PROGRAM)-rh-$(VERSION).tar.gz and" + @echo " $(PROGRAM)-suse-$(VERSION).tar.gz" + + +############################################################################# +# looks at the version of Makefile and exports a corresponding source-tree +# example: if the Makefile has the sticky tag v_2_9_13, you'll get +# privoxy-*-2.4.13.tar.gz. Two different tar files will be written, one for +# Red Hat and one for SuSe (different spec-files) +############################################################################# +create-archive: + make SNAPVERSION=$(SNAPVERSION) create-snapshot + + +############################################################################# +# RPM specific stuff (SuSE or Redhat, ..) +############################################################################# +rpm-stuff: dist-check clean clobber + for dir in RPMS SRPMS BUILD SOURCES SPECS; do \ + if [ ! -w $(RPM_BASE)/$$dir ]; then \ + $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \ + $(ECHO) "Or add a suitable path to .rpmmacros like."; \ + $(ECHO) "%_topdir /home/foo/rpm-build"; \ + exit 1; \ + fi; \ + done; \ + +check-release: + @if [ "$(RPM_PACKAGEV)" = "" ]; then \ + echo ; \ + echo " ERROR: NO RPM_PACKAGEV VALUE"; \ + echo " No value given for RPM_PACKAGEV. Please use:"; \ + echo " make dist-upload RPM_PACKAGEV=release"; \ + echo " where \"release\" is the release number you want to and"; \ + echo " where \"dist\" is the name of the distro (redhat or suse)"; \ + echo ; \ + echo " Ex: make redhat-upload RPM_PACKAGEV=1"; \ + echo ""; \ + echo "ATTENTION: If your distribution use a specific tag on the"; \ + echo " release field (like \"cl\" for Conectiva, and"; \ + echo " \"mdk\" for Mandrake), DO NOT put it on the value"; \ + echo " given to RPM_PACKAGEV. It will be added automaticaly."; \ + echo " Do it like you would do for a redhat package,"; \ + echo " (i.e. just the number)."; \ + echo ; \ + exit 1; \ + fi + + +############################################################################# +# Create Conectiva specfile from RedHat specfile +############################################################################# +conectiva-spec: + $(RM) privoxy-cl.spec + chmod a+x genclspec.sh + ./genclspec.sh + +############################################################################# +# Conectiva distribution for x86 +############################################################################# +conectiva-dist: rpm-stuff conectiva-spec + + $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-rh.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) . + $(RPM) --clean -ta $(TAR_ARCH) + if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi + +conectiva-upload: check-release + make redhat-upload RPM_PACKAGEV=$(RPM_PACKAGEV)cl + +############################################################################# +# redhat distribution alpha and x86 +############################################################################# +redhat-dist: rpm-stuff + echo $(CONFIG_FILES) + $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) . + $(RPMBUILD) --clean -ta $(TAR_ARCH) + if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi + +# For testing build issues only! Use redhat-dist for official releases. +redhat-test: + echo $(CONFIG_FILES) + $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) . + $(RPMBUILD) --clean -tb $(TAR_ARCH) + if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi + @echo "WARNING: This target is only for testing. Use redhat-dist for releases!!!" + +# anonymously ncftps the rpms to sourceforge +redhat-upload: check-release + ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm +# better should use `arch` here instead of ix86 to support other platforms too + ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm + @$(ECHO) ------------------------------------------------------- + @$(ECHO) Now goto + @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118 + @$(ECHO) ... and release the files. + @$(ECHO) ------------------------------------------------------- + # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118 + +############################################################################# +# suse distribution. works fine. no need to be root. +############################################################################# +suse-dist: rpm-stuff +# TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \ +# if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \ +# -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \ +# privoxy-suse.spec > $$TMPFILE ; then \ +# $(MV) -f $$TMPFILE privoxy-suse.spec; \ +# else \ +# $(ECHO) "Could not set version info in specfile."; \ +# exit 1;\ +# fi + + $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) . + $(RPM) --clean -ta $(TAR_ARCH) + if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi + +# anonymously ncftps the rpms to sourceforge +suse-upload: check-release + ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm +# better should use `arch` here instead of ix86 to support other platforms too + ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm + @$(ECHO) ------------------------------------------------------- + @$(ECHO) Now goto + @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118 + @$(ECHO) ... and release the files. + @$(ECHO) ------------------------------------------------------- + +# handle with care. use with root. +suse-clean: + $(RPM) -e junkbuster-suse || true + $(RM) -r /etc/junkbuster + $(RM) -r /etc/rc.d/junkbuster* + $(RM) -r /var/run/junkbuster.pid + $(RM) -r /var/log/junkbuster + $(RM) /etc/init.d/junkbuster + $(RM) /usr/sbin/junkbuster + $(RM) /usr/sbin/rcjunkbuster + $(RM) /usr/share/man/man1/junkbuster.1.gz + $(RPM) -e privoxy-suse || true + $(RM) -r /etc/privoxy + $(RM) -r /etc/rc.d/privoxy* + $(RM) -r /var/run/privoxy.pid + $(RM) -r /var/log/privoxy + $(RM) /etc/init.d/privoxy + $(RM) /usr/sbin/privoxy + $(RM) /usr/sbin/rcprivoxy + $(RM) /usr/share/man/man1/privoxy.1.gz + + +############################################################################# +# generic distribution +############################################################################# +gen-dist: dist-check + @$(ECHO) "" + @$(ECHO) "You have run autoconf && autoheader && ./configure right?" + @$(ECHO) "" + $(MAKE) $(PROGRAM) + $(STRIP_PROG) $(PROGRAM) + $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS) +# add program + (cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM)) +# add config files + for foo in $(CONFIG_FILES); do \ + (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ + done; +# add documentation + for foo in $(DOC_FILES); do \ + (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ + done; +# and zip the archive + $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS) + $(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar + @$(ECHO) Distribution with binary created. + +# anonymously ncftps the package to sourceforge +gen-upload: + ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz + @$(ECHO) ------------------------------------------------------- + @$(ECHO) Now goto + @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118 + @$(ECHO) ... and release the files. + @$(ECHO) ------------------------------------------------------- + +# use with care +gen-clean: + $(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar* + +############################################################################# +# solaris distribution. verified on SF machines by swa. +############################################################################# +solaris-dist: gen-dist + @$(ECHO) Done. +# anonymously ncftps the package to sourceforge +solaris-upload: gen-upload + @$(ECHO) Done. +# use with care +solaris-clean: gen-clean + @$(ECHO) Done. + +############################################################################# +# hpux distribution +############################################################################# +hpux-dist: + @$(ECHO) coming soon. +hpux-upload: + @$(ECHO) coming soon. + +############################################################################# +# debian distribution +############################################################################# +debian-dist: + @$(ECHO) Creating Debian package. Will exist in parent directory. + dpkg-buildpackage -rfakeroot -us -uc +debian-upload: + ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy_$(shell dpkg-parsechangelog | grep "Version" | sed "s/Version: //")_$(shell dpkg --print-architecture).deb + @$(ECHO) ------------------------------------------------------- + @$(ECHO) Now goto + @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118 + @$(ECHO) ... and release the files. + @$(ECHO) ------------------------------------------------------- + + +############################################################################# +# macosx distribution +############################################################################# +macosx-dist: + @$(ECHO) coming soon. +macosx-upload: + @$(ECHO) coming soon. + +############################################################################# +# amiga distribution +############################################################################# +amiga-dist: + @$(ECHO) coming soon. +amiga-upload: + @$(ECHO) coming soon. + +############################################################################# +# freebsd distribution. verified on SF machines by swa. +############################################################################# +freebsd-dist: gen-dist + @$(ECHO) Done. +# anonymously ncftps the package to sourceforge +freebsd-upload: gen-upload + @$(ECHO) Done. +# use with care +freebsd-clean: gen-clean + @$(ECHO) Done. + +############################################################################# +# Windows distribution +############################################################################# +win-dist: + @$(ECHO) RTFM. You shouldn't run configure before making + @$(ECHO) the Windows release, so you need to start again from + @$(ECHO) a clean CVS export. + @false + + +############################################################################# +# Tarball distribution: No CVS dirs, dotfiles, debian build dir, +# (FIXME:) only parts of the static / generated docs mix in doc/webserver +############################################################################# + +tarball-dist: dist-check clean clobber + $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS) + + for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \ + -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o -name "PACKAGERS" \)`; do \ + files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \ + done && \ + cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \ + +# and zip the archive + $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS) + $(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar + @$(ECHO) Tarball distribution created. + +# anonymously ncftps the tarball to sourceforge +tarball-upload: + ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz + @$(ECHO) ------------------------------------------------------- + @$(ECHO) Now goto + @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118 + @$(ECHO) ... and release the files. + @$(ECHO) ------------------------------------------------------- + +tarball-clean: + $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz + +############################################################################# +# +# Documentation +# +# converts doc/source/*.sgml into html, text and man pages +# +############################################################################# + + +dok: + cd $(DOC_DIR) && $(MAKE) + +############################################################################# +# +# Webserver +# +# moves dokumentation to webserver +# +############################################################################# +webserver: tidy + @$(ECHO) ------------------------------------------------------- + @$(ECHO) You have run make dok/redhat-dok before, right? + @$(ECHO) Note that this command scps all stuff to the webserver, + @$(ECHO) it will not remove obsolete documents. + @$(ECHO) ------------------------------------------------------- + + @$(ECHO) Uploading html + @cd doc/webserver; \ + upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \ + $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp' + + @$(ECHO) Uploading pdf + @cd doc/pdf;\ + zip privoxy-pdf-docs *.pdf ;\ + scp -q privoxy-pdf-docs.zip ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/pdf + + @$(ECHO) Fixing permissions + @ssh ijbswa.sourceforge.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true' + @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true' + @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null; true' + + +web-actions: tidy + @$(ECHO) Uploading + @cd doc/webserver/actions; \ + upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \ + $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm' + + @$(ECHO) Fixing permissions + @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null' + @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null' + +############################################################################# +# Source file dependencies +############################################################################# + +$(DIR_PRIVOXY_OBJ)/actions.@OBJEXT@: $(DIR_PRIVOXY_SRC)/actions.c $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/actionlist.h +$(DIR_PRIVOXY_OBJ)/cgi.@OBJEXT@: $(DIR_PRIVOXY_SRC)/cgi.c $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/cgiedit.h $(DIR_PRIVOXY_SRC)/cgisimple.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h +$(DIR_PRIVOXY_OBJ)/cgiedit.@OBJEXT@: $(DIR_PRIVOXY_SRC)/cgiedit.c $(DIR_PRIVOXY_SRC)/cgiedit.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h +$(DIR_PRIVOXY_OBJ)/cgisimple.@OBJEXT@: $(DIR_PRIVOXY_SRC)/cgisimple.c $(DIR_PRIVOXY_SRC)/cgisimple.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/actions.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h +$(DIR_PRIVOXY_OBJ)/deanimate.@OBJEXT@: $(DIR_PRIVOXY_SRC)/deanimate.c $(DIR_PRIVOXY_SRC)/deanimate.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) +$(DIR_PRIVOXY_OBJ)/encode.@OBJEXT@: $(DIR_PRIVOXY_SRC)/encode.c $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/config.h +$(DIR_PRIVOXY_OBJ)/errlog.@OBJEXT@: $(DIR_PRIVOXY_SRC)/errlog.c $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h +$(DIR_PRIVOXY_OBJ)/filters.@OBJEXT@: $(DIR_PRIVOXY_SRC)/filters.c $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/parsers.h $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/cgi.h $(DIR_PRIVOXY_SRC)/deanimate.h @WIN_ONLY@$(DIR_PRIVOXY_SRC)/win32.h +$(DIR_PRIVOXY_OBJ)/gateway.@OBJEXT@: $(DIR_PRIVOXY_SRC)/gateway.c $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h +$(DIR_PRIVOXY_OBJ)/jbsockets.@OBJEXT@: $(DIR_PRIVOXY_SRC)/jbsockets.c $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/filters.h +$(DIR_PRIVOXY_OBJ)/jcc.@OBJEXT@: $(DIR_PRIVOXY_SRC)/jcc.c $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/killpopup.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/parsers.h @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC)/cgi.h +$(DIR_PRIVOXY_OBJ)/killpopup.@OBJEXT@: $(DIR_PRIVOXY_SRC)/killpopup.c $(DIR_PRIVOXY_SRC)/killpopup.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h +$(DIR_PRIVOXY_OBJ)/list.@OBJEXT@: $(DIR_PRIVOXY_SRC)/list.c $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/list.h $(DIR_PRIVOXY_SRC)/miscutil.h +$(DIR_PRIVOXY_OBJ)/loadcfg.@OBJEXT@: $(DIR_PRIVOXY_SRC)/loadcfg.c $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/killpopup.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/parsers.h @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/win32.h +$(DIR_PRIVOXY_OBJ)/loaders.@OBJEXT@: $(DIR_PRIVOXY_SRC)/loaders.c $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/gateway.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/parsers.h $(DIR_PRIVOXY_SRC)/ssplit.h +$(DIR_PRIVOXY_OBJ)/miscutil.@OBJEXT@: $(DIR_PRIVOXY_SRC)/miscutil.c $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/config.h +$(DIR_PRIVOXY_OBJ)/parsers.@OBJEXT@: $(DIR_PRIVOXY_SRC)/parsers.c $(DIR_PRIVOXY_SRC)/parsers.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/encode.h $(DIR_PRIVOXY_SRC)/filters.h $(DIR_PRIVOXY_SRC)/jbsockets.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/loaders.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/ssplit.h +$(DIR_PRIVOXY_OBJ)/ssplit.@OBJEXT@: $(DIR_PRIVOXY_SRC)/ssplit.c $(DIR_PRIVOXY_SRC)/ssplit.h $(DIR_PRIVOXY_SRC)/config.h $(DIR_PRIVOXY_SRC)/miscutil.h +$(DIR_PRIVOXY_OBJ)/urlmatch.@OBJEXT@: $(DIR_PRIVOXY_SRC)/urlmatch.c $(DIR_PRIVOXY_SRC)/urlmatch.h $(DIR_PRIVOXY_SRC)/config.h $(PROJECT_H_DEPS) $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/ssplit.h + +# PCRS +$(DIR_PRIVOXY_OBJ)/pcrs.@OBJEXT@: $(DIR_PRIVOXY_SRC)/pcrs.c $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/config.h + +# PCRE +$(DIR_PRIVOXY_OBJ)/get.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/get.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h +$(DIR_PRIVOXY_OBJ)/maketables.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/maketables.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h +$(DIR_PRIVOXY_OBJ)/pcre.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/pcre.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/chartables.c +$(DIR_PRIVOXY_OBJ)/pcreposix.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h +$(DIR_PRIVOXY_OBJ)/study.@OBJEXT@: $(DIR_PRIVOXY_SRC_PCRE)/study.c $(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h + +# An auxiliary program makes the PCRE default character table source + +$(DIR_PRIVOXY_SRC_PCRE)/chartables.c: $(DIR_PRIVOXY_OBJ)/dftables@EXEEXT@ + $(DIR_PRIVOXY_SRC_PCRE)/dftables@EXEEXT@ >$(DIR_PRIVOXY_SRC_PCRE)/chartables.c + +$(DIR_PRIVOXY_OBJ)/dftables@EXEEXT@: $(DIR_PRIVOXY_SRC_PCRE)/dftables.c $(DIR_PRIVOXY_SRC_PCRE)/maketables.c $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/config.h + $(CC) -o $(DIR_PRIVOXY_SRC_PCRE)/dftables@EXEEXT@ $(CFLAGS) $(DIR_PRIVOXY_SRC_PCRE)/dftables.c + +# Win32 +$(DIR_PRIVOXY_OBJ)/w32log.@OBJEXT@: $(DIR_PRIVOXY_SRC)/config.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/project.h $(DIR_PRIVOXY_SRC)/w32log.c $(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/w32taskbar.h $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h +$(DIR_PRIVOXY_OBJ)/win32.@OBJEXT@: $(DIR_PRIVOXY_SRC)/config.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/project.h $(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/win32.c $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h +$(DIR_PRIVOXY_OBJ)/w32taskbar.@OBJEXT@: $(DIR_PRIVOXY_SRC)/config.h $(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/w32taskbar.c $(DIR_PRIVOXY_SRC)/w32taskbar.h + +$(DIR_PRIVOXY_OBJ)/w32res.res: $(DIR_PRIVOXY_SRC)/w32res.rc \ + $(DIR_PRIVOXY_SRC)/w32res.h \ + $(DIR_PRIVOXY_SRC)/config.h \ + $(DIR_PRIVOXY_SRC)/icons/ico00001.ico \ + $(DIR_PRIVOXY_SRC)/icons/ico00002.ico \ + $(DIR_PRIVOXY_SRC)/icons/ico00003.ico \ + $(DIR_PRIVOXY_SRC)/icons/ico00004.ico \ + $(DIR_PRIVOXY_SRC)/icons/ico00005.ico \ + $(DIR_PRIVOXY_SRC)/icons/ico00006.ico \ + $(DIR_PRIVOXY_SRC)/icons/ico00007.ico \ + $(DIR_PRIVOXY_SRC)/icons/ico00008.ico \ + $(DIR_PRIVOXY_SRC)/icons/idle.ico \ + $(DIR_PRIVOXY_SRC)/icons/privoxy.ico + windres -D__MINGW32__=0.2 -O coff -i $< -o $@ + +# AmigaOS +@AMIGAOS_ONLY@OBJS += $(DIR_PRIVOXY_OBJ)/amiga.@OBJEXT@ +@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code +@AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel +@AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o +$(DIR_PRIVOXY_OBJ)/amiga.@OBJEXT@: $(DIR_PRIVOXY_SRC)/amiga.c $(DIR_PRIVOXY_SRC)/amiga.h $(DIR_PRIVOXY_SRC)/config.h + + +$(PROGRAM): $(OBJS) $(W32_FILES) + $(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS) + +clean: + $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) \ + default.action `find . -name TAGS -o -name tags` + +tidy: + $(RM) `find . -name "*~"` +# $(RM) `find . -name "#*#"` # what is this for?? + $(RM) `find . -name ".\#*"` + +clobber: tidy + $(RM) GNUmakefile configure src/config.h.in src/config.h config.cache config.status config.log logfile \ + privoxy.log core *.tar.gz *.tar privoxy-cl.spec $(DOC_DIR)/ldp.dsl \ + $(DOC_DIR)/GNUmakefile + +# +# FIXME: What is all this? +# + $(RM) cscope.* *.pdb *.lib *.exp + +distclean: clobber + +tags: $(SRCS) $(HDRS) + etags $(SRCS) $(HDRS) + +CONF_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(CONF_BASE)" = "$(prefix)/etc" ];then \ + $(ECHO) "$(CONF_BASE)/privoxy";\ + else\ + $(ECHO) "$(CONF_BASE)";\ + fi) + +LOG_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(LOGS_DEST)" = "$(prefix)/var/log/privoxy" ];then \ + $(ECHO) "/var/log/privoxy" ;\ + else\ + $(ECHO) "$(LOGS_DEST)";\ + fi) + +PID_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(PIDS_DEST)" = "$(prefix)/var/run" ];then \ + $(ECHO) "/var/run" ;\ + else\ + $(ECHO) "$(PIDS_DEST)";\ + fi) + +check_doc:=$(shell if [ ! -d "$(SHARE_DEST)/doc" ] && [ "$(prefix)" = "/usr/local" ] && [ -d "$(prefix)/doc" ];then \ + $(ECHO) "1";\ + else\ + $(ECHO) "0";\ + fi) + +install-strip: + $(MAKE) INSTALL_P='$(INSTALL_P) -s' install + +install: CONF_DEST LOG_DEST PID_DEST check_doc all + # + # FIXME: test this in all systems and with several options and report any bugs + # + + $(MKDIR) $(SBIN_DEST) $(prefix) $(CONF_DEST) $(SHARE_DEST) $(MAN_DEST) $(LOG_DEST) $(PID_DEST) + + # Install the executable binary + $(INSTALL) $(INSTALL_P) $(PROGRAM) $(SBIN_DEST) + + $(INSTALL) $(INSTALL_D) $(CONF_DEST) + $(INSTALL) $(INSTALL_D) $(CONF_DEST)/templates + + # Install the DOCS and man page + if [ $(check_doc) = 0 ]; then \ + DOC=$(DOC_DEST) ;\ + else \ + DOC=$(prefix)/doc/privoxy ;\ + fi;\ + $(INSTALL) $(INSTALL_D) $$DOC ;\ + $(INSTALL) $(INSTALL_D) $$DOC/user-manual ;\ + $(INSTALL) $(INSTALL_D) $$DOC/faq ;\ + if [ -d "$(DOK_WEB_USEM)" ]; then \ + $(INSTALL) $(INSTALL_T) $(DOK_WEB_USEM)/[^C]* $$DOC/user-manual;\ + $(INSTALL) $(INSTALL_T) $(DOK_WEB_USEM)/[^C]* $$DOC/faq;\ + $(INSTALL) $(INSTALL_T) $(DOK_WEB_USEM)/../p_doc.css $$DOC;\ + $(INSTALL) $(INSTALL_T) AUTHORS $$DOC;\ + $(INSTALL) $(INSTALL_T) LICENSE $$DOC;\ + $(INSTALL) $(INSTALL_T) README $$DOC;\ + $(INSTALL) $(INSTALL_T) ChangeLog $$DOC;\ + fi + -$(GZIP_PROG) -c privoxy.1 > $(MAN_DEST)/privoxy.1.gz + + # Change the Config file default directories acording to the configured ones + if [ -e config.base ] ; then \ + $(CAT) config >config~ ;\ + $(MV) config.base config ;\ + fi + $(SED) 's+confdir .+confdir $(CONF_DEST)+' config | \ + $(SED) 's+logdir .+logdir $(LOG_DEST)+' >config.updated + $(MV) config config.base + $(MV) config.updated config + + # Install the config support files. Test for root install, and abort + # if there is no privoxy user, and no other user was enabled during + # configure. + $(INSTALL) $(INSTALL_T) templates/[^C]* $(CONF_DEST)/templates + if [ `$(ID)` = 0 ] ;then\ + if [ x$(USER) = x ]; then \ + if [ `$(ID) privoxy` ]; then \ + $(ECHO) -e "\n Setting user and group to privoxy";\ + INSTALL_CONF="$(INSTALL_T) -b -g privoxy -o privoxy" ;\ + else \ + $(ECHO) -e "******************************************************************" ;\ + $(ECHO) -e " WARNING! WARNING! installing config files as root!" ;\ + $(ECHO) -e " It is strongly recommended to run $(PROGRAM) as non-root user," ;\ + $(ECHO) -e " and to install the config files as that user!" ;\ + $(ECHO) -e " Please read INSTALL, and create a privoxy user!" ;\ + $(ECHO) -e "*******************************************************************" ;\ + exit 1 ;\ + fi ;\ + else \ + if [ x$(GROUP) = x ]; then \ + $(ECHO) -e "\n Superuser install, installing config files as $(USER),$(USER)" ;\ + INSTALL_CONF="$(INSTALL_T) -b -o $(USER) -g $(USER)" ;\ + else \ + $(ECHO) -e "\n Superuser install, installing config files as $(USER),$(GROUP)" ;\ + INSTALL_CONF="$(INSTALL_T) -b -o $(USER) -g $(GROUP)" ;\ + fi ;\ + fi ;\ + else \ + if [ ! `$(ID) $(USER)` = `$(ID)` ] ;then \ + $(ECHO) -e "\n ** WARNING ** current install user different from configured user!! edit may fail.\n" ;\ + fi ;\ + INSTALL_CONF="$(INSTALL_T) -b " ;\ + fi ;\ + $(INSTALL) $$INSTALL_CONF config default.action default.filter standard.action $(CONF_DEST) ;\ + if [ ! -s "$(CONF_DEST)/user.action" ] ; then \ + $(INSTALL) $$INSTALL_CONF user.action $(CONF_DEST) ;\ + fi ;\ + if [ ! -s "$(CONF_DEST)/trust" ] ; then \ + $(INSTALL) $$INSTALL_CONF trust $(CONF_DEST) ;\ + fi ;\ + + # setup the logfiles + # mode 0640 in the logs for privacy reasons + $(TOUCH) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile + -$(CHOWN) $(USER),$(GROUP) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || \ + $(ECHO) -e "\n ** WARNING ** current install user different from configured user!! Loging may fail\n" + -$(CHMOD) 0640 $(LOG_DEST)/logfile $(LOG_DEST)/jarfile + + # Install the init and logrotate scripts. Test for Slackware and Red Hat only. + # Install if dest is writable. + if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \ + $(SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \ + $(SED) 's+%SBIN_DEST%+$(SBIN_DEST)+' | \ + $(SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \ + $(SED) 's+%USER%+$(USER)+' | \ + $(SED) 's+%GROUP%+$(GROUP)+' >slackware/rc.privoxy ;\ + $(INSTALL) $(INSTALL_P) slackware/rc.privoxy /etc/rc.d/ ;\ + $(ECHO) -e "\n Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\ + elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \ + $(INSTALL) $(INSTALL_P) privoxy.init /etc/init.d/privoxy ;\ + $(MKDIR) /etc/logrotate.d/ ;\ + $(INSTALL) $(INSTALL_P) privoxy.logrotate /etc/logrotate.d/privoxy ;\ + elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \ + $(INSTALL) $(INSTALL_P) privoxy-generic.init /etc/init.d/privoxy ;\ + else \ + $(ECHO) -e "\n No init script installed, install it manually" ;\ + fi + # FIXME $(ECHO) privoxy.logrotate privoxy.monthly privoxy.weekly + +uninstall: CONF_DEST LOG_DEST PID_DEST check_doc + # + # FIXME: test this in all systems and with several options and report any bugs + # + + # KILL privoxy if running + -@ $(KILL) `$(CAT) $(PID_DEST)/privoxy.pid ` >/dev/nul 2>/dev/null + -@ $(KILL) `$(CAT) /var/run/privoxy.pid ` >/dev/nul 2>/dev/null + + # Program binary + $(RM) $(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~ + + # config files and dir and maybe old install backups + $(RM) $(CONF_DEST)/config $(CONF_DEST)/default.action $(CONF_DEST)/default.filter \ + $(CONF_DEST)/trust $(CONF_DEST)/standard.action $(CONF_DEST)/user.action \ + $(CONF_DEST)/config~ $(CONF_DEST)/default.action~ $(CONF_DEST)/default.filter~ \ + $(CONF_DEST)/trust~ $(CONF_DEST)/standard.action~ $(CONF_DEST)/user.action~ + $(RM) -r $(CONF_DEST)/templates + -$(RMDIR) $(CONF_DEST) || $(ECHO) -e " $(CONF_DEST) is not empty, couldnt remove it\n" ;\ + + # man page and docs + -$(RM) $(MAN_DEST)/privoxy.1.gz + -$(RM) -r $(DOC_DEST) || $(RM) -r $(prefix)/doc/privoxy + + # Log and jarfile and pidfile + -$(RM) $(LOG_DEST)/logfile || $(RM) /var/log/privoxy/logfile + -$(RM) $(LOG_DEST)/jarfile || $(RM) /var/log/privoxy/jarfile + -$(RM) $(PID_DEST)/privoxy.pid || $(RM) /var/run/privoxy.pid + + # final clean up of unused directories + if [ ! "$(prefix)" = "/usr/local" ] ;then \ + $(RMDIR) $(MAN_DEST) || $(ECHO) -e " $(MAN_DEST) is not empty, couldnt remove it\n" ;\ + $(RMDIR) $(MAN_DIR) || $(ECHO) -e " $(MAN_DIR) is not empty, couldnt remove it\n" ;\ + $(RMDIR) $(SHARE_DEST)/doc || $(ECHO) -e " $(SHARE_DEST)/doc is not empty, couldnt remove it\n" ;\ + $(RMDIR) $(SHARE_DEST) || $(ECHO) -e " $(SHARE_DEST) is not empty, couldnt remove it\n" ;\ + $(RMDIR) $(CONF_BASE) || $(ECHO) -e " $(CONF_BASE) is not empty, couldnt remove it\n" ;\ + $(RMDIR) $(SBIN_DEST) || $(ECHO) -e " $(SBIN_DEST) is not empty, couldnt remove it\n" ;\ + $(RMDIR) $(LOG_DEST) || $(ECHO) -e " $(LOG_DEST) is not empty, couldnt remove it\n" ;\ + $(RMDIR) $(prefix) || $(ECHO) -e " $(prefix) is not empty, couldnt remove it\n" ;\ + fi + # init scripts and logrotate + if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \ + $(RM) /etc/rc.d/rc.privoxy ;\ + elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \ + $(RM) /etc/rc.d/init.d/privoxy /etc/logrotate.d/privoxy;\ + elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \ + $(RM) /etc/init.d/privoxy ;\ + else \ + $(ECHO) -e "\n Unable to remove privoxy init script... not installed or permition denied" ;\ + fi + +coffee: + @perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,101,0,109,143,205,13,192,32,8,133,\ + 239,78,241,110,234,1,28,160,171,152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,143,\ + 13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,69,253,36,102,81,49,83,236,19,225,171,131,\ + 214,172,163,73,4,168,123,115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,187,54,220,125,\ + 193,51,228,11,1,0,0);'|zcat + +############################################################################# + +## Local Variables: +## tab-width: 3 +## end: + # $Log: GNUmakefile.in,v $ +# Revision 1.120 2002/10/10 20:39:27 dessent +# +# +# Fixes for Win32 GUI build (added "$(DIR_PRIVOXY_SRC)/" to dependencies list) +# +# Revision 1.119 2002/09/23 03:42:41 hal9 +# This is higuita's make install/uninstall patch. Needs testing please!!! +# +# Revision 1.118 2002/09/11 08:22:37 oes +# Fixed path (C_HDRS are in src/ now) +# +# Revision 1.117 2002/09/06 23:33:35 hal9 +# Fix clobber for config.h and config.h.in are in src now. +# +# Revision 1.116 2002/09/06 05:22:57 hal9 +# Adapt make webserver target to 3.0 for pdf uploading. +# +# Revision 1.115 2002/09/05 19:13:04 hal9 +# Migrate Karstens make snapshot stuff (not tested). +# +# Revision 1.114 2002/09/05 11:58:30 oes +# Synced in some changes fromm the stable branch: +# From Revision 1.104.2.14 2002/08/10 11:19:37 oes: +# - Add dependency: pcrs.o deps on config.h +# Revision 1.104.2.9 2002/07/26 15:17:02 oes +# - Added generation of default.action from defaul.action.master +# - Deleted obsolete re_filterfile.txt generation +# +# Revision 1.113 2002/07/30 21:50:25 hal9 +# Add redhat-test target, and migrate the RPM_PACKAGEV stuff from 3.0 branch. +# +# Revision 1.112 2002/06/28 18:30:10 jongfoster +# Fixing bugs compiling PCRE +# +# Revision 1.111 2002/06/05 00:26:21 hal9 +# Move all doc build stuff to doc/source/GNUmakefile, leaving a 'make dok' +# target only in toplevel. Add DOC_STATUS variable so docs can be built without +# touching sgml source. +# +# Revision 1.110 2002/06/04 14:51:48 jongfoster +# Updating for new paths: +# - Source files in src/ +# - Object files in obj/ +# +# Revision 1.109 2002/05/28 09:16:15 oes +# Added comment for -notoc kludge +# +# Revision 1.108 2002/05/28 03:56:08 hal9 +# make dok-index target for privoxy-index.html. Fix *bak dead soldiers in +# doc/webserver. +# +# Revision 1.107 2002/05/27 23:26:33 mal0rd +# Made doc-generation configuration automatic. +# References to DB2HTML were removed, not used. +# --with-docbook now only needed if in odd path. +# +# Revision 1.106 2002/05/26 04:55:11 mal0rd +# Added debian-dist and debian-upload targets. Also documented usage. +# +# Revision 1.105 2002/05/25 22:48:19 hal9 +# Add -notoc to README build (per oes's dsl magic). +# +# Revision 1.104 2002/05/24 00:03:49 oes +# Use p_doc.css for the Homepage for consistency +# +# Revision 1.103 2002/05/23 23:19:00 oes +# Use dsl without TOC for the homepage +# +# Revision 1.102 2002/05/16 01:20:17 hal9 +# make announce target added. +# +# Revision 1.101 2002/05/15 12:28:46 oes +# Trying to keep Hal happy :) +# +# Revision 1.100 2002/05/08 13:48:18 hal9 +# Ooops, that trashed JB v2.0.2 comment. Fixed. +# +# Revision 1.99 2002/05/08 13:42:07 hal9 +# This fixes the numbering problem on index.html in contact info section (.1.). Using +# perl, since its way too convoluted to try to fix proper with docbook. +# +# Revision 1.98 2002/05/03 14:33:06 oes +# Replaced ldp(OK).dsl handling with generation via autoconf; handle all file exeptions to src tarball via find +# +# Revision 1.97 2002/04/27 20:27:43 swa +# no longer needed due to new +# PACKAGE_VERSION process +# +# Revision 1.96 2002/04/27 17:44:32 morcego +# - Correcting typo in my name (Rodrigo, not Rodgrigo) :-) +# - Using the RM macro everywhere rm is called (either we use, or don't) +# - Same for RPM +# +# Revision 1.95 2002/04/27 15:37:25 swa +# replacing directory in document creation process +# no longer necessary. +# +# Revision 1.94 2002/04/27 08:23:29 swa +# pdf process reviewed and cleaned up +# +# Revision 1.93 2002/04/27 04:55:53 morcego +# privoxy-cl.spec now gets removed by clobber target +# +# Revision 1.92 2002/04/27 04:53:40 morcego +# Adding --exclude "PACKAGERS" to every tar command that applies (not for +# webserver target) +# +# Revision 1.91 2002/04/27 04:44:51 morcego +# GNUmakefile.in: The tarball created on redhat-dist and suse-dist now ignore +# the PACKAGERS file, as well privoxy-cl.spec (in case it was created) +# GNUmakefile.in: New targets -> conectiva-spec, conectiva-dist and +# conectiva-upload +# genclspec.sh : New file to generate, from privoxy-rh.spec, a specfile +# for Conectiva Linux +# +# Revision 1.90 2002/04/26 17:46:53 swa +# be consistent +# +# Revision 1.89 2002/04/26 17:20:54 swa +# just produce single html files to proces them later with Destiller or somesuch. looks prettier. +# +# Revision 1.88 2002/04/25 19:13:57 morcego +# Removed RPM release number declaration on configure.in +# Changed makefile to use given value for RPM_PACKAGEV when on uploading +# targets (will produce an error, explaining who to do it, if no value +# if provided). +# +# Revision 1.87 2002/04/23 14:10:59 swa +# now create pdf documents +# +# Revision 1.86 2002/04/15 04:30:27 hal9 +# Missed two -pi.bak's on perl/cygwin problem. +# +# Revision 1.85 2002/04/14 01:05:34 hal9 +# Revert dok-webserver change for SF logo. +# +# Revision 1.84 2002/04/13 22:43:25 hal9 +# -Fix dok-webserver for SF logo (more perl). +# -Change all perl -pi to perl -pi.bak for Cygwin problem. +# +# Revision 1.83 2002/04/12 09:39:25 oes +# Excluding yet more files from tarball; making dist warning yet more scary +# +# Revision 1.82 2002/04/11 21:07:11 oes +# Excluding more files from tarball build +# +# Revision 1.81 2002/04/11 14:40:27 oes +# Fixed typo -- Thanks, Moritz! +# +# Revision 1.80 2002/04/11 12:50:00 oes +# Fixed tarball-dist target +# +# Revision 1.79 2002/04/11 06:49:28 oes +# webserver target: silenced timestamp warnings resulting from uploading westwards, made permissions fixing independant of screwed local dir permissions, suppress (false alarm) make error if not owner of feedback log +# +# Revision 1.78 2002/04/09 13:37:11 sarantis +# fix tar options typo +# +# Revision 1.77 2002/04/09 13:28:53 swa +# build suse and gen-dist with html docs +# +# Revision 1.76 2002/04/08 22:43:41 oes +# Fix: Include dotfiles in fixing webserver permissions +# +# Revision 1.75 2002/04/08 22:14:59 oes +# Silencing tar warnings in the web* targets +# +# Revision 1.74 2002/04/08 15:22:44 hal9 +# This has finishing touches for dok building. Should be ready to go. +# -The main doc build is now 'make dok', should work on Redhat too. +# -Removed man page from main doc build. It is built separately due to +# perl scripts that most aren't likely to have. +# +# Revision 1.73 2002/04/08 14:03:24 oes +# oes for al: Fix install target +# +# Revision 1.72 2002/04/08 13:42:11 oes +# Added safety check to *-dist targets; fixed permissions for feedback logfile +# +# Revision 1.71 2002/04/07 20:32:03 hal9 +# -Add meta data kludge for make dok-webserver via $(PERL). +# -Add subdirs for 'make dok-release'. +# +# Revision 1.70 2002/04/07 08:59:40 swa +# generated files. do NOT edit. +# fixed directory bug in makefile. +# +# Revision 1.69 2002/04/07 08:10:47 swa +# create some of the webserver docs +# automatically (in particular if +# those docs recycle other documentation +# fragments). Now committed webserver's +# index file. +# +# Revision 1.68 2002/04/07 07:58:11 swa +# create some of the webserver docs +# automatically (in particular if +# those docs recycle other documentation +# fragments) +# +# Revision 1.67 2002/04/07 05:31:42 hal9 +# Add 'dok-release' target: +# -Set doc entities to VERSION and CODE_STATUS during make. +# -Set doc conditional content flags (stable vs non-stable). +# A separate target for the time being but needs to be incorporated into +# dok build at some point. +# -Filter out a spurious ^G from new man page > html converion in man2html. +# +# Revision 1.66 2002/04/06 20:28:21 jongfoster +# Prettifying groff2html. +# Using GNU Make's conditional makefile feature rather than shell "if"s. +# (The shell "if"s were hiding errors) +# "perl" -> "$(PERL)" +# Spaces->tabs in a couple of places. +# +# Revision 1.65 2002/04/06 05:16:39 hal9 +# -Add 'authors' and 'man' targets for AUTHORS and man-page (WIP). +# -Both of these will soon be generated files. +# +# Revision 1.64 2002/04/04 22:14:51 oes +# No longer rely on find honoring -iname +# +# Revision 1.63 2002/04/04 21:06:22 swa +# cosmetics. +# +# Revision 1.62 2002/04/04 20:49:50 swa +# attempt to consolidate the +# different dokbook versions. +# +# Revision 1.61 2002/04/04 19:18:21 swa +# readme was leftover directory. use w3m instead +# of lynx to be consistent among developers. use +# consistent target naming. +# +# Revision 1.60 2002/04/04 12:25:41 oes +# Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions +# +# Revision 1.59 2002/04/04 08:32:45 swa +# wrong name for tarball-dist target. further fixed content of tarball dist +# +# Revision 1.58 2002/04/04 06:32:58 hal9 +# New dok targets for make readme. +# +# Revision 1.57 2002/04/04 00:36:36 gliptak +# always use pcre for matching +# +# Revision 1.56 2002/04/03 22:28:03 gliptak +# Removed references to gnu_regex +# +# Revision 1.55 2002/04/03 19:54:29 swa +# freebsd tested to work. attempt to move tarball dist target forward +# +# Revision 1.54 2002/04/03 14:54:07 oes +# Standard clean and clobber semantics II +# +# Revision 1.53 2002/04/03 14:19:16 oes +# Standard clean and clobber semantics +# +# Revision 1.52 2002/04/03 02:56:18 hal9 +# Revert previous FAQ numbering kludge. +# +# Revision 1.51 2002/04/02 13:03:56 oes +# Added fix for webserver permissions +# +# Revision 1.50 2002/04/02 03:46:24 hal9 +# Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort +# to make the Table of Contents not so 'busy' looking. SuSE needs testing :) +# +# Revision 1.49 2002/03/30 22:20:12 swa +# cd didn't work. neither did find. +# +# Revision 1.48 2002/03/30 19:04:06 swa +# people release differently. no good. +# I want to make parts of the docs only. +# +# Revision 1.47 2002/03/30 09:05:21 swa +# better packaging. better rpm building. +# tar failed on sun (no exclude there). +# +# Revision 1.46 2002/03/29 20:09:01 swa +# al's patch +# +# Revision 1.45 2002/03/29 19:45:45 swa +# for lazy swa +# +# Revision 1.44 2002/03/29 17:42:44 gliptak +# Correcting for Solaris tar limitations +# +# Revision 1.43 2002/03/29 07:40:03 swa +# fixed make webserver. doh +# +# Revision 1.42 2002/03/29 06:59:04 swa +# other users could not modify files on webserver +# +# Revision 1.41 2002/03/28 20:43:00 swa +# set make correctly +# +# Revision 1.40 2002/03/28 04:22:44 hal9 +# More on man2html stuff. +# +# Revision 1.39 2002/03/28 01:04:14 hal9 +# More man2html stuff for docs. +# +# Revision 1.38 2002/03/27 16:02:30 swa +# have a generic target +# +# Revision 1.37 2002/03/27 15:30:26 swa +# have a consistent appearance +# +# Revision 1.36 2002/03/27 14:58:08 swa +# can be used by mutilple targets +# +# Revision 1.35 2002/03/27 14:53:19 swa +# added solaris-dist +# +# Revision 1.34 2002/03/27 10:30:11 swa +# we want a html man file on the webserver +# +# Revision 1.33 2002/03/27 03:05:35 hal9 +# Added man2html target for docs (redhat-dok only for now) +# +# Revision 1.32 2002/03/26 22:29:54 swa +# we have a new homepage! +# +# Revision 1.31 2002/03/26 14:00:18 swa +# fixed make tarball, tarball-dist, tarball-clean +# +# Revision 1.30 2002/03/25 12:52:25 swa +# new targets +# +# Revision 1.29 2002/03/24 17:03:55 jongfoster +# Name change +# +# Revision 1.28 2002/03/24 16:19:48 swa +# configure needs to be generated. +# +# Revision 1.27 2002/03/24 16:13:57 swa +# generated files are a nono in cvs +# +# Revision 1.26 2002/03/24 15:36:02 swa +# did not build. +# +# Revision 1.25 2002/03/24 14:31:08 swa +# remove more crappy files. set RPM +# release version correctly. +# +# Revision 1.24 2002/03/24 14:19:55 swa +# set rpm package release in configure.in. nowhere else. +# +# Revision 1.23 2002/03/24 13:06:49 swa +# suse-clean now runs fine +# +# Revision 1.22 2002/03/24 12:56:21 swa +# name change related issues. +# +# Revision 1.21 2002/03/24 12:43:57 swa +# name change +# +# Revision 1.20 2002/03/24 11:39:17 jongfoster +# Renaming config files +# +# Revision 1.19 2002/03/22 20:53:03 morcego +# - Ongoing process to change name to JunkbusterNG +# - configure/configure.in: no change needed +# - GNUmakefile.in: +# - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz +# - PROGRAM = jbng@EXEEXT@ +# - rh-spec now references as junkbusterng-rh.spec +# - redhat-upload: references changed to junkbusterng-* (package names) +# - tarball-dist: references changed to JunkbusterNG-distribution-* +# - tarball-src: now JunkbusterNG-* +# - install: initscript now junkbusterng.init and junkbusterng (when +# installed) +# - junkbuster-rh.spec: renamed to junkbusterng-rh.spec +# - junkbusterng.spec: +# - References to the expression ijb where changed where possible +# - New package name: junkbusterng (all in lower case, acording to +# the LSB recomendation) +# - Version changed to: 2.9.13 +# - Release: 1 +# - Added: junkbuster to obsoletes and conflicts (Not sure this is +# right. If it obsoletes, why conflict ? Have to check it later) +# - Summary changed: Stefan, please check and aprove it +# - Changes description to use the new name +# - Sed string was NOT changed. Have to wait to the manpage to +# change first +# - Keeping the user junkbuster for now. It will require some aditional +# changes on the script (scheduled for the next specfile release) +# - Added post entry to move the old logfile to the new log directory +# - Removing "chkconfig --add" entry (not good to have it automaticaly +# added to the startup list). +# - Added preun section to stop the service with the old name, as well +# as remove it from the startup list +# - Removed the chkconfig --del entry from the conditional block on +# the preun scriptlet (now handled on the %files section) +# - junkbuster.init: renamed to junkbusterng.init +# - junkbusterng.init: +# - Changed JB_BIN to jbng +# - Created JB_OBIN with the old value of JB_BIN (junkbuster), to +# be used where necessary (config dir) +# +# Aditional notes: +# - The config directory is /etc/junkbuster yet. Have to change it on the +# specfile, after it is changes on the code +# - The only files that got renamed on the cvs tree were the rh specfile and +# the init file. Some file references got changes on the makefile and on the +# rh-spec (as listed above) +# +# Revision 1.18 2002/03/21 23:00:00 swa +# want to autogenerate stuff. +# +# Revision 1.17 2002/03/19 19:30:04 morcego +# - Fixing stylesheet checking on configure. If it is found, no further checks +# should be done +# +# - configure will now check for db2html or docbook2html (should work now +# on SuSe without the docbktls package) +# +# Revision 1.16 2002/03/14 22:32:32 hal9 +# Bumped the RPM version. +# +# Revision 1.15 2002/03/08 20:00:28 swa +# some leftovers. +# +# Revision 1.14 2002/03/07 18:25:56 swa +# synced redhat and suse build process +# +# Revision 1.13 2002/03/07 17:17:56 oes +# (Hopefully) fixed for older make versions +# +# Revision 1.12 2002/03/07 15:28:27 swa +# more informative +# +# Revision 1.11 2002/03/06 14:33:18 sarantis +# Use proper temp file, not "abc". +# +# Revision 1.10 2002/03/06 14:19:35 sarantis +# Cleanup PID_FILE_PATH from redhat-dist target +# +# Revision 1.9 2002/03/05 17:31:11 morcego +# Search for docbook.dsl. Should solve portability problems for SuSe. +# # Revision 1.8 2002/03/05 14:07:42 morcego # configure now detects rpm topdir, and change GNUmakefile acordingly # (based on sugestion by Sarantis Paskalis) @@ -218,458 +1652,3 @@ # Initial import of version 2.9.3 source tree # # - -############################################################################# -# Version number (for RPM) -############################################################################# - -VERSION_MAJOR = @VERSION_MAJOR@ -VERSION_MINOR = @VERSION_MINOR@ -VERSION_POINT = @VERSION_POINT@ -CODE_STATUS = @CODE_STATUS@ -VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT) -# will automatically be postfixed with -$(RPM_PACKAGEV) in the SPECfile -RPM_VERSION = $(VERSION) -RPM_PACKAGEV = 1 - - -############################################################################# -# Directories for "make install" -############################################################################# - -DEST = @sysconfdir@/junkbuster -SBIN_DEST = @sbindir@ -MAN_DEST = @mandir@ - - -############################################################################# -# Build tools -############################################################################# - -PROGRAM = junkbuster@EXEEXT@ -CC = @CC@ -ECHO = echo -GZIP_PROG = gzip -INSTALL = cp -f -LD = @CC@ -RM = rm -f -STRIP_PROG = strip -SED = sed -CAT = cat -RPM = rpm -MV = mv -TAR = tar -MAKE = make -LN = ln -WDUMP = @WDUMP@ -dump -JADEBIN = @JADEBIN@ -DB = $(JADEBIN) -t sgml -ihtml -D.. -d ldpOK.dsl\#html -DKPREFIX = @DKPREFIX@ - -# Program to do LF->CRLF -# -# The sed version should be the most portable, but it doesn't for for me, -# the other two do. FIXME. -# - Jon -#DOSFILTER = $(SED) -e $$'s,$$,\r,' -#DOSFILTER = gawk -v ORS='\r\n' '{print $0;}' -DOSFILTER = perl -p -e 's/\n/\r\n/' - -############################################################################# -# Setup for make distribution rh and suse for now -############################################################################# - -TAR_ARCH = /tmp/ijbswa-$(RPM_VERSION).tar.gz -RPM_BASE = @RPM_BASE@ - -############################################################################# -# Filenames and libraries -############################################################################# - -C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \ - errlog.c filters.c gateway.c jbsockets.c jcc.c killpopup.c \ - list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \ - urlmatch.c - -C_OBJS = $(C_SRC:.c=.@OBJEXT@) -C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h - -W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c -W32_FILES = @WIN_ONLY@w32.res -W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES) -W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h -W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32 -W32_INIS = @WIN_ONLY@config.txt trust.txt re_filterfile.txt - -PCRS_SRC = @STATIC_PCRS_ONLY@pcrs.c -PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@) -PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h) - -PCRE_SRC = @STATIC_PCRE_ONLY@pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c -PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:.c=.@OBJEXT@) -PCRE_HDRS = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h - -# No REGEX (Either because dynamically linked pcreposix, or no regex at all): -REGEX_SRC = -# GNU REGEX: -@GNU_REGEX_ONLY@REGEX_SRC = gnu_regex.c -# PCRE REGEX: -@PCRE_REGEX_ONLY@@STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c - -REGEX_OBJS = $(REGEX_SRC:.c=.@OBJEXT@) -REGEX_HDRS = $(REGEX_SRC:.c=.h) - -# Dependencies introduced by #include "project.h". -PROJECT_H_DEPS = project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@pcre/pcre.h - -# Socket libraries for platforms that need them explicitly defined -SOCKET_LIB = @SOCKET_LIB@ - -# PThreads library, if needed. -PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@ - -SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC) -OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS) -HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS) -LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB) - - -############################################################################# -# Compiler switches -############################################################################# - -# The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build. -# The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a -# Win32 GUI build. -# The flag "-pthread" is required if using Pthreads under Linux (and -# possibly other OSs). -SPECIAL_CFLAGS = @SPECIAL_CFLAGS@ - -# Add your flags here -OTHER_CFLAGS = - -CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \ - @STATIC_PCRE_ONLY@ -Ipcre - -LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS) - - -############################################################################# -# Build section. -# -# There should NOT be any targets above this line. -############################################################################# -all: $(PROGRAM) - - -############################################################################# -# Phony targets -############################################################################# -.PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \ -suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \ -install - - -############################################################################# -# Define this explicitly because Solaris is broken! -############################################################################# -%.o: %.c - $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@ - - -############################################################################# -# Win32 config files -############################################################################# - -inifiles: $(W32_INIS) - -config.txt: config - $(SED) -e 's!\trustfile trust!trustfile trust.txt!' \ - -e 's!\jarfile jarfile!jarfile jar.log!' \ - -e 's!\logfile logfile!logfile junkbuster.log!' \ - -e 's!\re_filterfile re_filterfile!re_filterfile re_filterfile.txt!' \ - -e 's!#Win32-only: !!' \ - < $< | \ - $(DOSFILTER) > $@ - # LF to CRLF in ijb.action - $(DOSFILTER) ijb.action.txt && mv ijb.action.txt ijb.action - -trust.txt: trust - $(DOSFILTER) < $< > $@ - -re_filterfile.txt: re_filterfile - $(DOSFILTER) < $< > $@ - - -############################################################################# -# redhat distribution alpha and x86 -############################################################################# - -redhat-dist: - @for dir in RPMS SRPMS BUILD SOURCES SPECS; do \ - if [ ! -w $(RPM_BASE)/$$dir ]; then \ - $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \ - exit; \ - fi; \ - done ; \ - $(MAKE) clobber; \ - [ -f $(TAR_ARCH) ] && $(RM) $(TAR_ARCH); \ - $(CAT) junkbuster-rh.spec | \ - $(SED) 's/^Version:.*/Version: $(RPM_VERSION)/g;s/^Release:.*/Release: $(RPM_PACKAGEV)/g' > abc && \ - $(MV) -f abc junkbuster-rh.spec; \ - $(CAT) junkbuster.init | \ - $(SED) 's#JB_PID=.*/\(.*\.pid\).*#JB_PID=@PID_FILE_PATH@/\1#g' > abc && \ - $(MV) -f abc junkbuster.init; \ - $(TAR) --exclude "CVS" --exclude "junkbuster-suse.spec" -cvzf $(TAR_ARCH) . ; \ - $(RPM) --clean -ta $(TAR_ARCH); \ - [ -f $(TAR_ARCH) ] && $(RM) $(TAR_ARCH) - -# -# anonymously ncftps the rpms to sourceforge -# -redhat-upload: - ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/junkbuster-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm -# better should use `arch` here instead of ix86 to support other platforms too - ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/junkbuster-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm - @$(ECHO) ------------------------------------------------------- - @$(ECHO) Now goto - @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118 - @$(ECHO) ... and release the files. - @$(ECHO) ------------------------------------------------------- - # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118 - -############################################################################# -# sun solaris distribution -############################################################################# -solaris-dist: - @$(ECHO) coming soon. - -############################################################################# -# suse distribution (need to be root to build) -############################################################################# - -suse-dist: - @make clobber -# verify that i'm root needs to be done - rm -f ../ijbswa.tar.gz -# verify all version strings, FLAGS, etc. in the spec file - cat junkbuster-suse.spec | sed 's/^Version:.*/Version: $(RPM_VERSION)/g' | sed 's/^Release:.*/Release: $(RPM_PACKAGEV)/g' > abc && mv -f abc junkbuster-suse.spec - tar --exclude "CVS" --exclude "junkbuster-rh.spec" -cvzf ../ijbswa.tar.gz . -# verify all files in their correct location needs to be done -# never use buildroot to define the location inside the spec -# file or suse will fuck up the build process. - cd .. && rpm -ta --buildroot /tmp/xxx ijbswa.tar.gz - chmod a+r /usr/src/packages/SRPMS/* - chmod a+r /usr/src/packages/RPMS/i386/* - -# -# anonymously ncftps the rpms to sourceforge -# -suse-upload: - ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming /usr/src/packages/SRPMS/junkbuster-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm -# better should use `arch` here instead of ix86 to support other platforms too - ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming /usr/src/packages/RPMS/*/junkbuster-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm - @$(ECHO) ------------------------------------------------------- - @$(ECHO) Now goto - @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118 - @$(ECHO) ... and release the files. - @$(ECHO) ------------------------------------------------------- - -# handle with care. use with root. -suse-clean: - rpm -e junkbuster-suse - rm -rf /etc/junkbuster - rm -rf /var/log/junkbuster - rm -f /etc/init.d/junkbuster - rm -f /usr/sbin/junkbuster - rm -f /usr/sbin/rcjunkbuster - rm -f /usr/share/man/man1/junkbuster.1.gz - -############################################################################# -# Windows distribution -############################################################################# -win-dist: - $(ECHO) Not implemented. - - -############################################################################# -# Tarball distribution -############################################################################# -tarball-dist: - @make clean - make $(PROGRAM) -# remove all objects and create the tarball with the binary - cd .. && $(RM) ijb/a.out ijb/core ijb/*.@OBJEXT@ && tar --exclude "ijb/CVS" -cvzf ../ijb-distribution-$(VERSION).tar.gz ijb/ - chmod a+r ../../ijb-distribution-$(VERSION).tar.gz - @$(ECHO) Tarball with binary created. - -############################################################################# -# -# Documentation -# -# converts doc/source/*.sgml into html, text and man pages -# -############################################################################# -dok: doc/source/ldpOK.dsl - mkdir -p doc/text doc/man -# user manual - rm -rf doc/webserver/user-manual - cd doc/source && db2html -s ldpOK.dsl user-manual.sgml && mv user-manual ../webserver - cd doc/source && db2html -s ldpOK.dsl --nochunks user-manual.sgml > tmp.html && lynx -dump tmp.html > ../text/user-manual.txt && rm -rf tmp.html user-manual -## developer manual - rm -rf doc/webserver/developer-manual - cd doc/source && db2html -s ldpOK.dsl developer-manual.sgml && mv developer-manual ../webserver - cd doc/source && db2html -s ldpOK.dsl --nochunks developer-manual.sgml > tmp.html && lynx -dump tmp.html > ../text/developer-manual.txt && rm -rf tmp.html developer-manual -## faq - rm -rf doc/webserver/faq - cd doc/source && db2html -s ldpOK.dsl faq.sgml && mv faq ../webserver - cd doc/source && db2html -s ldpOK.dsl --nochunks faq.sgml > tmp.html && lynx -dump tmp.html > ../text/faq.txt && rm -rf tmp.html faq - -redhat-dok: doc/source/ldpOK.dsl - mkdir -p doc/text doc/man doc/source/user-manual \ - doc/source/developer-manual doc/source/faq -## user manual - rm -rf doc/webserver/user-manual - cd doc/source/user-manual && $(DB) ../user-manual.sgml && cd .. &&\ - mv user-manual ../webserver - cd doc/source && $(DB) -V nochunks user-manual.sgml > tmp.html && \ - $(WDUMP) tmp.html > ../text/user-manual.txt && rm -rf tmp.html \ - user-manual -## developer manual - rm -rf doc/webserver/developer-manual - cd doc/source/developer-manual && $(DB) ../developer-manual.sgml &&\ - cd .. && mv developer-manual ../webserver - cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && \ - $(WDUMP) tmp.html > ../text/developer-manual.txt && rm -rf tmp.html \ - developer-manual -## faq - rm -rf doc/webserver/faq - cd doc/source/faq && $(DB) ../faq.sgml && cd .. && mv faq ../webserver - cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) \ - tmp.html > ../text/faq.txt && rm -rf tmp.html faq - -doc/source/ldpOK.dsl: - if [ "$(DKPREFIX)" != "none" ]; then \ - sed -e "s@/usr/share/sgml/docbook/dsssl-stylesheets@$(DKPREFIX)@g" doc/source/ldp.dsl > doc/source/ldpOK.dsl; \ - else \ - cp doc/source/ldp.dsl doc/source/ldpOK.dsl; \ - fi - -############################################################################# -# -# Webserver -# -# moves dokumentation to webserver -# -############################################################################# -webserver: - @$(ECHO) ------------------------------------------------------- - @$(ECHO) You have run make dok/redhat-dok before, right? - @$(ECHO) Note that this command scps all stuff to the webserver, - @$(ECHO) it will not remove obsolete documents. - @$(ECHO) ------------------------------------------------------- - chmod -R a+r doc/webserver - find doc/webserver -type d -exec chmod a+rx {} \; - cd doc/webserver && scp -Cr . ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/ - -############################################################################# -# Source file dependencies -############################################################################# - -actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h -cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h -cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h -cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h -deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS) -encode.@OBJEXT@: encode.c encode.h config.h -errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h -filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h @WIN_ONLY@win32.h -gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h -jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h -jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h killpopup.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h cgi.h -killpopup.@OBJEXT@: killpopup.c killpopup.h config.h $(PROJECT_H_DEPS) jcc.h loadcfg.h -list.@OBJEXT@: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h -loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h killpopup.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h -loaders.@OBJEXT@: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h -miscutil.@OBJEXT@: miscutil.c miscutil.h config.h -parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h -ssplit.@OBJEXT@: ssplit.c ssplit.h config.h miscutil.h -urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h - -# GNU regex -gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h - -# PCRS -pcrs.@OBJEXT@: pcrs.c pcre/pcre.h pcrs.h - -# PCRE -pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h -pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h -pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c -pcre/pcreposix.@OBJEXT@: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h -pcre/study.@OBJEXT@: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h - -# An auxiliary program makes the PCRE default character table source - -pcre/chartables.c: pcre/dftables@EXEEXT@ - pcre/dftables@EXEEXT@ >pcre/chartables.c - -pcre/dftables@EXEEXT@: pcre/dftables.c pcre/maketables.c pcre/pcre.h pcre/internal.h pcre/config.h - $(CC) -o pcre/dftables@EXEEXT@ $(CFLAGS) pcre/dftables.c - -# Win32 -w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h -w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h -win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h - -w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/junkbust.ico config.h - windres -D__MINGW32__=0.2 -O coff -i $< -o $@ - -# AmigaOS -@AMIGAOS_ONLY@OBJS += amiga.o -@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code -@AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel -@AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o -@AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h - - -$(PROGRAM): $(OBJS) $(W32_FILES) - $(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS) - -clean: - $(RM) a.out core $(OBJS) $(W32_FILES) $(W32_INIS) - -clobber: clean - $(RM) $(PROGRAM) cscope.* logfile *.pdb *.lib *.exp `find . -name tags` TAGS junkbuster.log config.cache *~ *.tar.gz - -tags: $(SRCS) $(HDRS) - etags $(SRCS) $(HDRS) - -tarball-src: clobber - $(LN) -s current ../ijb-$(VERSION)-$(CODE_STATUS) - $(TAR) -C.. -cvhzf ijb-$(VERSION)-$(CODE_STATUS)-src.tar.gz ijb-$(VERSION)-$(CODE_STATUS) - $(RM) ../ijb-$(VERSION)-$(CODE_STATUS) - -install: all - # - # FIXME: This is a dirty hack to have an install target - # that works at least for some setups. This needs - # to be fixed! - # - $(STRIP_PROG) $(PROGRAM) - $(INSTALL) $(PROGRAM) $(SBIN_DEST) - mkdir -p $(DEST)/user-manual - mkdir -p $(DEST)/templates - cp -r doc/webserver/user-manual $(DEST) - cp -r templates $(DEST) - $(INSTALL) config ijb.action re_filterfile trust $(DEST) - # FIXME $(ECHO) junkbuster.logrotate junkbuster.monthly junkbuster.weekly - # FIXME: Need new manual! $(GZIP_PROG) -c junkbuster.1 > $(MAN_DEST)/junkbuster.1.gz - $(INSTALL) junkbuster.init /etc/init.d/junkbuster - - -############################################################################# - -## Local Variables: -## tab-width: 3 -## end: