X-Git-Url: http://www.privoxy.org/gitweb/?p=privoxy.git;a=blobdiff_plain;f=GNUmakefile.in;h=e9d7d9488d68c520c15629b3c204c4a74a538595;hp=e2fe72c7cb3d1b9c57d0dc22256d9768baa53791;hb=6a20d658eced1f944d1a004276504bc53e05aa4e;hpb=87f0568a697e13a729cf294e4066eb207da223c9 diff --git a/GNUmakefile.in b/GNUmakefile.in index e2fe72c7..e9d7d948 100644 --- a/GNUmakefile.in +++ b/GNUmakefile.in @@ -1,6 +1,6 @@ # Note: Makefile is built automatically from Makefile.in # -# $Id: GNUmakefile.in,v 1.83 2002/04/12 09:39:25 oes Exp $ +# $Id: GNUmakefile.in,v 1.110 2002/06/04 14:51:48 jongfoster Exp $ # # Written by and Copyright (C) 2001 the SourceForge # Privoxy team. http://www.privoxy.org/ @@ -42,20 +42,26 @@ VERSION_MINOR = @VERSION_MINOR@ VERSION_POINT = @VERSION_POINT@ CODE_STATUS = @CODE_STATUS@ VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT) -# will automatically be postfixed with -$(RPM_PACKAGEV) in the SPECfile RPM_VERSION = $(VERSION) -RPM_PACKAGEV = @VERSION_RPM_PACKAGE@ +############################################################################# +# Source directories +############################################################################# +DIR_PRIVOXY_ROOT := . +DIR_PRIVOXY_SRC := $(DIR_PRIVOXY_ROOT)/src +DIR_PRIVOXY_SRC_PCRE := $(DIR_PRIVOXY_ROOT)/pcre +DIR_PRIVOXY_OBJ := $(DIR_PRIVOXY_ROOT)/obj + ############################################################################# # Directories for "make install" ############################################################################# -DEST = @prefix@ -CONFDEST = @prefix@@sysconfdir@ -SBIN_DEST = @prefix@@sbindir@ -MAN_DEST = @prefix@@mandir@ -DOK_WEB_USEM=doc/webserver/user-manual +DEST = @prefix@ +CONFDEST = @prefix@@sysconfdir@ +SBIN_DEST = @prefix@@sbindir@ +MAN_DEST = @prefix@@mandir@ +DOK_WEB_USEM = doc/webserver/user-manual ############################################################################# # Build tools @@ -65,7 +71,6 @@ PROGRAM = privoxy@EXEEXT@ CC = @CC@ ECHO = echo GZIP_PROG = gzip -#INSTALL = cp -f INSTALL = @INSTALL@ INSTALL_P = -m 0750 -g @GROUP@ -o @USER@ -b INSTALL_T = -m 0640 -g @GROUP@ -o @USER@ -b @@ -82,13 +87,18 @@ LN = ln WDUMP = @WDUMP@ -dump JADECAT = @JADECAT@ JADEBIN = @JADEBIN@ -DB = $(JADEBIN) $(JADECAT) -ihtml -t sgml -D.. -d ldpOK.dsl\#html -DB2HTML = @DB2HTML@ -DKPREFIX = @DKPREFIX@ +DOC_STATUS = @DOC_STATUS@ +# Note: Please make sure that -d ldp.dsl\#html stays the last option to +# $(JADEBIN), because for some targets "-notoc" will be appended +# to it (--> "ldp.dsl\#html-notoc"). +DB = $(JADEBIN) $(JADECAT) -i$(DOC_STATUS) -ihtml -t sgml -D.. -d ldp.dsl\#html MAN2HTML = @MAN2HTML@ G2H_CMD = groff -mandoc -Thtml TARGET_OS = @host@ PERL = perl +DOC_DIR = doc/source +DOC_TMP = $(DOC_DIR)/tmp + #User Group paras USER = @USER@ @@ -96,7 +106,7 @@ GROUP = @GROUP@ # Program to do LF->CRLF # -# The sed version should be the most portable, but it doesn't for for me, +# The sed version should be the most portable, but it doesn't work for me, # the other two do. FIXME. # - Jon #DOSFILTER = $(SED) -e $$'s,$$,\r,' @@ -118,13 +128,13 @@ RPM_BASE = @RPM_BASE@ # and escape every '#' in the find. doh. CONFIG_FILES = config trust \ default.action \ - basic.action intermediate.action advanced.action \ + standard.action user.action \ default.filter \ `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` DOC_FILES = AUTHORS LICENSE README ChangeLog \ `find doc/text/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` \ - `find doc/webserver/ -name "*.html"` \ + `find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \ `find doc/webserver/ -name "*.css"` \ privoxy.1 @@ -132,38 +142,54 @@ DOC_FILES = AUTHORS LICENSE README ChangeLog \ # Filenames and libraries ############################################################################# -C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \ - errlog.c filters.c gateway.c jbsockets.c jcc.c killpopup.c \ - list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \ - urlmatch.c - -C_OBJS = $(C_SRC:.c=.@OBJEXT@) +C_SRC = \ + $(DIR_PRIVOXY_SRC)/actions.c \ + $(DIR_PRIVOXY_SRC)/cgi.c \ + $(DIR_PRIVOXY_SRC)/cgiedit.c \ + $(DIR_PRIVOXY_SRC)/cgisimple.c \ + $(DIR_PRIVOXY_SRC)/deanimate.c \ + $(DIR_PRIVOXY_SRC)/encode.c \ + $(DIR_PRIVOXY_SRC)/errlog.c \ + $(DIR_PRIVOXY_SRC)/filters.c \ + $(DIR_PRIVOXY_SRC)/gateway.c \ + $(DIR_PRIVOXY_SRC)/jbsockets.c \ + $(DIR_PRIVOXY_SRC)/jcc.c \ + $(DIR_PRIVOXY_SRC)/killpopup.c \ + $(DIR_PRIVOXY_SRC)/list.c \ + $(DIR_PRIVOXY_SRC)/loadcfg.c \ + $(DIR_PRIVOXY_SRC)/loaders.c \ + $(DIR_PRIVOXY_SRC)/miscutil.c \ + $(DIR_PRIVOXY_SRC)/parsers.c \ + $(DIR_PRIVOXY_SRC)/ssplit.c \ + $(DIR_PRIVOXY_SRC)/urlmatch.c + +C_OBJS = $(C_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@) C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h -W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c -W32_FILES = @WIN_ONLY@w32.res -W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES) -W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h +W32_SRC = @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.c $(DIR_PRIVOXY_SRC)/w32taskbar.c $(DIR_PRIVOXY_SRC)/win32.c +W32_FILES = @WIN_ONLY@$(DIR_PRIVOXY_OBJ)/w32res.res +W32_OBJS = @WIN_ONLY@$(W32_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@) $(W32_FILES) +W32_HDRS = @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/w32taskbar.h $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC)/w32res.h W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32 W32_INIS = @WIN_ONLY@config.txt trust.txt -PCRS_SRC = @STATIC_PCRS_ONLY@pcrs.c -PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@) +PCRS_SRC = @STATIC_PCRS_ONLY@$(DIR_PRIVOXY_SRC)/pcrs.c +PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@) PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h) -PCRE_SRC = @STATIC_PCRE_ONLY@pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c -PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:.c=.@OBJEXT@) -PCRE_HDRS = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h +PCRE_SRC = @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/get.c $(DIR_PRIVOXY_SRC_PCRE)/maketables.c $(DIR_PRIVOXY_SRC_PCRE)/study.c $(DIR_PRIVOXY_SRC_PCRE)/pcre.c +PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:$(DIR_PRIVOXY_SRC_PCRE)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@) +PCRE_HDRS = @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/chartables.c $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h # No REGEX (maybe because dynamically linked pcreposix): REGEX_SRC = -@STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c +@STATIC_PCRE_ONLY@REGEX_SRC = $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.c -REGEX_OBJS = $(REGEX_SRC:.c=.@OBJEXT@) +REGEX_OBJS = $(REGEX_SRC:$(DIR_PRIVOXY_SRC_PCRE)/%.c=%.@OBJEXT@) REGEX_HDRS = $(REGEX_SRC:.c=.h) # Dependencies introduced by #include "project.h". -PROJECT_H_DEPS = project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@pcre/pcre.h +PROJECT_H_DEPS = $(DIR_PRIVOXY_SRC)/project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/pcre.h # Socket libraries for platforms that need them explicitly defined SOCKET_LIB = @SOCKET_LIB@ @@ -210,15 +236,21 @@ all: $(PROGRAM) ############################################################################# .PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \ suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \ -install +install conectiva-spec conectiva-dist conectiva-upload debian-dist \ +debian-upload ensure-wdump ensure-jadebin ensure-dkprefix ############################################################################# -# Define this explicitly because Solaris is broken! +# Compile command ############################################################################# -%.o: %.c +$(DIR_PRIVOXY_OBJ)/%.o: $(DIR_PRIVOXY_SRC)/%.c $(DIR_PRIVOXY_OBJ) + $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@ + +$(DIR_PRIVOXY_OBJ)/%.o: $(DIR_PRIVOXY_SRC_PCRE)/%.c $(DIR_PRIVOXY_OBJ) $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@ +$(DIR_PRIVOXY_OBJ): + mkdir obj ############################################################################# # Win32 config files @@ -282,26 +314,59 @@ rpm-stuff: dist-check clean clobber fi; \ done; \ +check-release: + @if [ "$(RPM_PACKAGEV)" = "" ]; then \ + echo ; \ + echo " ERROR: NO RPM_PACKAGEV VALUE"; \ + echo " No value given for RPM_PACKAGEV. Please use:"; \ + echo " make dist-upload RPM_PACKAGEV=release"; \ + echo " where \"release\" is the release number you want to and"; \ + echo " where \"dist\" is the name of the distro (redhat or suse)"; \ + echo ; \ + echo " Ex: make redhat-upload RPM_PACKAGEV=1"; \ + echo ""; \ + echo "ATTENTION: If your distribution use a specific tag on the"; \ + echo " release field (like \"cl\" for Conectiva, and"; \ + echo " \"mdk\" for Mandrake), DO NOT put it on the value"; \ + echo " given to RPM_PACKAGEV. It will be added automaticaly."; \ + echo " Do it like you would do for a redhat package,"; \ + echo " (i.e. just the number)."; \ + echo ; \ + exit 1; \ + fi + + +############################################################################# +# Create Conectiva specfile from RedHat specfile +############################################################################# +conectiva-spec: + $(RM) privoxy-cl.spec + chmod a+x genclspec.sh + ./genclspec.sh + +############################################################################# +# Conectiva distribution for x86 +############################################################################# +conectiva-dist: rpm-stuff conectiva-spec + + $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-rh.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) . + $(RPM) --clean -ta $(TAR_ARCH) + if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi + +conectiva-upload: check-release + make redhat-upload RPM_PACKAGEV=$(RPM_PACKAGEV)cl + ############################################################################# # redhat distribution alpha and x86 ############################################################################# redhat-dist: rpm-stuff - TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \ - if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \ - -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \ - privoxy-rh.spec > $$TMPFILE ; then \ - $(MV) -f $$TMPFILE privoxy-rh.spec; \ - else \ - $(ECHO) "Could not set version info in specfile."; \ - exit 1;\ - fi - $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" -czf $(TAR_ARCH) . + $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) . $(RPM) --clean -ta $(TAR_ARCH) if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi # anonymously ncftps the rpms to sourceforge -redhat-upload: +redhat-upload: check-release ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm # better should use `arch` here instead of ix86 to support other platforms too ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm @@ -316,22 +381,22 @@ redhat-upload: # suse distribution. works fine. no need to be root. ############################################################################# suse-dist: rpm-stuff - TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \ - if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \ - -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \ - privoxy-suse.spec > $$TMPFILE ; then \ - $(MV) -f $$TMPFILE privoxy-suse.spec; \ - else \ - $(ECHO) "Could not set version info in specfile."; \ - exit 1;\ - fi - - $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" -czf $(TAR_ARCH) . +# TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \ +# if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \ +# -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \ +# privoxy-suse.spec > $$TMPFILE ; then \ +# $(MV) -f $$TMPFILE privoxy-suse.spec; \ +# else \ +# $(ECHO) "Could not set version info in specfile."; \ +# exit 1;\ +# fi + + $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) . $(RPM) --clean -ta $(TAR_ARCH) if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi # anonymously ncftps the rpms to sourceforge -suse-upload: +suse-upload: check-release ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm # better should use `arch` here instead of ix86 to support other platforms too ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm @@ -343,24 +408,24 @@ suse-upload: # handle with care. use with root. suse-clean: - rpm -e junkbuster-suse || true - rm -rf /etc/junkbuster - rm -rf /etc/rc.d/junkbuster* - rm -rf /var/run/junkbuster.pid - rm -rf /var/log/junkbuster - rm -f /etc/init.d/junkbuster - rm -f /usr/sbin/junkbuster - rm -f /usr/sbin/rcjunkbuster - rm -f /usr/share/man/man1/junkbuster.1.gz - rpm -e privoxy-suse || true - rm -rf /etc/privoxy - rm -rf /etc/rc.d/privoxy* - rm -rf /var/run/privoxy.pid - rm -rf /var/log/privoxy - rm -f /etc/init.d/privoxy - rm -f /usr/sbin/privoxy - rm -f /usr/sbin/rcprivoxy - rm -f /usr/share/man/man1/privoxy.1.gz + $(RPM) -e junkbuster-suse || true + $(RM) -r /etc/junkbuster + $(RM) -r /etc/rc.d/junkbuster* + $(RM) -r /var/run/junkbuster.pid + $(RM) -r /var/log/junkbuster + $(RM) /etc/init.d/junkbuster + $(RM) /usr/sbin/junkbuster + $(RM) /usr/sbin/rcjunkbuster + $(RM) /usr/share/man/man1/junkbuster.1.gz + $(RPM) -e privoxy-suse || true + $(RM) -r /etc/privoxy + $(RM) -r /etc/rc.d/privoxy* + $(RM) -r /var/run/privoxy.pid + $(RM) -r /var/log/privoxy + $(RM) /etc/init.d/privoxy + $(RM) /usr/sbin/privoxy + $(RM) /usr/sbin/rcprivoxy + $(RM) /usr/share/man/man1/privoxy.1.gz ############################################################################# # generic distribution @@ -373,14 +438,14 @@ gen-dist: dist-check $(STRIP_PROG) $(PROGRAM) $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS) # add program - (cd .. && $(TAR) -cvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM)) + (cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM)) # add config files for foo in $(CONFIG_FILES); do \ - (cd .. && $(TAR) -uvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ + (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ done; # add documentation for foo in $(DOC_FILES); do \ - (cd .. && $(TAR) -uvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ + (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ done; # and zip the archive $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS) @@ -424,9 +489,16 @@ hpux-upload: # debian distribution ############################################################################# debian-dist: - @$(ECHO) coming soon. + @$(ECHO) Creating Debian package. Will exist in parent directory. + dpkg-buildpackage -rfakeroot -us -uc debian-upload: - @$(ECHO) coming soon. + ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy_$(shell dpkg-parsechangelog | grep "Version" | sed "s/Version: //")_$(shell dpkg --print-architecture).deb + @$(ECHO) ------------------------------------------------------- + @$(ECHO) Now goto + @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118 + @$(ECHO) ... and release the files. + @$(ECHO) ------------------------------------------------------- + ############################################################################# # macosx distribution @@ -460,7 +532,10 @@ freebsd-clean: gen-clean # Windows distribution ############################################################################# win-dist: - $(ECHO) Not implemented. + @$(ECHO) RTFM. You shouldn't run configure before making + @$(ECHO) the Windows release, so you need to start again from + @$(ECHO) a clean CVS export. + @false ############################################################################# @@ -472,10 +547,10 @@ tarball-dist: dist-check clean clobber $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS) for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \ - -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" \)`; do \ + -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o -name "PACKAGERS" \)`; do \ files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \ done && \ - cd .. && $(TAR) cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \ + cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \ # and zip the archive $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS) @@ -502,145 +577,9 @@ tarball-clean: # ############################################################################# -# our style file -doc/source/ldpOK.dsl: - if [ "$(DKPREFIX)" != "none" ]; then \ - sed -e "s@/usr/share/sgml/docbook/dsssl-stylesheets@$(DKPREFIX)@g" doc/source/ldp.dsl > doc/source/ldpOK.dsl; \ - else \ - cp doc/source/ldp.dsl doc/source/ldpOK.dsl; \ - fi -# Otherwise we get plain groff conversion. -groff2html: - $(G2H_CMD) ./privoxy.1 | $(SED) -e 's@@@' > doc/webserver/man-page/privoxy-man-page.html - -# developer manual -dok-devel: doc/source/ldpOK.dsl - rm -f doc/webserver/developer-manual/*.html - rm -rf doc/source/developer-manual - mkdir -p doc/text doc/source/developer-manual - cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/ - cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/developer-manual.txt && rm -rf tmp.html developer-manual - -# user manual -dok-user: doc/source/ldpOK.dsl - rm -f doc/webserver/user-manual/*.html - rm -rf doc/source/user-manual/ - mkdir -p doc/text doc/source/user-manual - cd doc/source/user-manual && $(DB) ../user-manual.sgml && cd .. && cp user-manual/*.html ../webserver/user-manual/ - cd doc/source && $(DB) -V nochunks user-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/user-manual.txt && rm -rf tmp.html user-manual - -# faq -dok-faq: doc/source/ldpOK.dsl - rm -f doc/webserver/faq/*.html - rm -rf doc/source/faq - mkdir -p doc/text doc/source/faq - cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/ - cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) tmp.html > ../text/faq.txt && rm -rf tmp.html faq - -# man page -dok-man: doc/source/ldpOK.dsl - rm -f doc/man/* doc/webserver/man-page/*.html -ifneq ($(MAN2HTML),false) - $(ECHO) "
<\/a><\/p><\/BODY/'\
- doc/webserver/index.html && rm -f doc/source/webserver/*.bak
-
-# Main documentation target.
-dok: dok-release dok-devel dok-user dok-faq dok-readme dok-webserver authors
-# kludge to force recreation on next run. Rodgrigo?
- @rm -f doc/source/ldpOK.dsl
- @$(ECHO) Documentation created.
-
-#
-# an alternative to the above dok. disabled man page creation for the moment
-#
-redhat-dok: dok-release dok-devel dok-user dok-faq redhat-readme dok-webserver authors
-# kludge to force recreation on next run. Rodgrigo?
- @rm -f doc/source/ldpOK.dsl
- @$(ECHO) Documentation created.
-
-# For those with man2html ala RH7's.
-man2html:
- mkdir -p doc/webserver/man-page
-ifneq ($(MAN2HTML),false)
- $(MAN2HTML) privoxy.1 |grep -v "^Content-type" > tmp.html
- $(PERL) -pi -e 's///; s//man2html/' tmp.html
- $(PERL) -pi -e 's/(<\/HEAD>)/<\/HEAD>/' tmp.html
-# Get rid of spurious from conversion. (How to do this with perl?)
- $(SED) -e 's///g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && rm -f tmp.html
-else
- $(MAKE) groff2html
-endif
-
-## Make README
-redhat-readme: doc/source/ldpOK.dsl
- cd doc/source && $(DB) -V nochunks readme.sgml > tmp.html && $(WDUMP) \
- tmp.html > ../../README && rm -rf tmp.html
- # kludge to force recreation on next run. Rodgrigo?
- @rm -f doc/source/ldpOK.dsl
-
-## Make AUTHORS file
-authors: doc/source/ldpOK.dsl
- cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && $(WDUMP) \
- tmp.html > ../../AUTHORS && rm -f tmp.html
- # kludge to force recreation on next run. Rodgrigo?
- @rm -f doc/source/ldpOK.dsl
-
-# make a man page, and then (lousy) HTML version.
-# Requires docbook2man (short perl script), see comments
-# in privoxy-man-page.sgml. This target is not invoked from other dok targets.
-# It is built separately due to dependencies on perl scripts.
-man: doc/source/ldpOK.dsl
- mkdir -p doc/source/man
- cd doc/source/man && docbook2man ../privoxy-man-page.sgml &&\
- perl -pi -e 's/