X-Git-Url: http://www.privoxy.org/gitweb/?p=privoxy.git;a=blobdiff_plain;f=GNUmakefile.in;h=4d778bbbe83c854b6c21d4cd77eb4e6470fffb36;hp=94902a2f290fa548a5f7241d69b79b336c94cfab;hb=e4eb400d24d54c9ab715f8e293e439959d0f7ae9;hpb=7ef3d02e07f3bb7db27707cae8bfe61a1212ffd5;ds=sidebyside diff --git a/GNUmakefile.in b/GNUmakefile.in index 94902a2f..4d778bbb 100644 --- a/GNUmakefile.in +++ b/GNUmakefile.in @@ -1,15 +1,15 @@ # Note: Makefile is built automatically from Makefile.in # -# $Id: GNUmakefile.in,v 1.186 2010/02/20 12:49:54 fabiankeil Exp $ +# $Id: GNUmakefile.in,v 1.220 2013/02/05 14:01:38 fabiankeil Exp $ # -# Written by and Copyright (C) 2001-2010 members of the +# Written by and Copyright (C) 2001-2013 members of the # Privoxy team. http://www.privoxy.org/ # # Based on the Internet Junkbuster originally written -# by and Copyright (C) 1997 Anonymous Coders and +# by and Copyright (C) 1997 Anonymous Coders and # Junkbusters Corporation. http://www.junkbusters.com # -# This program is free software; you can redistribute it +# This program is free software; you can redistribute it # and/or modify it under the terms of the GNU General # Public License as published by the Free Software # Foundation; either version 2 of the License, or (at @@ -60,21 +60,22 @@ CONF_BASE = @sysconfdir@ SBIN_DEST = @sbindir@ MAN_DIR = @mandir@ MAN_DEST = $(MAN_DIR)/man1 +MAN_PAGE = privoxy.1 SHARE_DEST = @datadir@ DOC_DEST = $(SHARE_DEST)/doc/privoxy VAR_DEST = @localstatedir@ LOGS_DEST = $(VAR_DEST)/log/privoxy PIDS_DEST = $(VAR_DEST)/run -# if $prefix = /usr/local then the default CONFDEST change from -# CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy +# if $prefix = /usr/local then the default CONFDEST change from +# CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy # by the target rule CONF_DEST # # also if the $prefix is /usr/local and there is no # $(SHARE_DEST)/doc, it checks for $prefix/doc and installs there # instead in this situation # -# finally if $prefix=/usr/local and VAR_DEST=$prefix/var it +# finally if $prefix=/usr/local and VAR_DEST=$prefix/var it # changes this to /var for storing the logs and pidfile # used in source dir only, the install goes to $share_dest/doc/privoxy @@ -85,18 +86,18 @@ INSTALL = @INSTALL@ # Binaries BIN_MODE = 0755 # Support files, docs, etc. -RA_MODE = 0664 +RA_MODE = 0644 # Directory DIR_MODE = 0755 # Files daemon writes to. RWD_MODE = 0660 -INSTALL_P = -m $(BIN_MODE) +INSTALL_P = -m $(BIN_MODE) INSTALL_T = -m $(RA_MODE) INSTALL_D = -m $(DIR_MODE) -d INSTALL_R = -m $(RWD_MODE) # install options for superuser install -#INSTALL_S = -g @GROUP@ -o @USER@ +#INSTALL_S = -g @GROUP@ -o @USER@ ############################################################################# # Build tools @@ -129,7 +130,8 @@ CHMOD = chmod CHOWN = chown CHGRP = chgrp GROUPS = groups -WDUMP = @WDUMP@ -dump +W3M_DUMP = env -u LANG LC_ALL=C @W3M@ -dump +W3M_DUMP_UTF8 = @W3M@ -dump JADECAT = @JADECAT@ JADEBIN = @JADEBIN@ DB = $(JADEBIN) $(JADECAT) -ihtml -t sgml -D.. -d ldp.dsl\#html @@ -141,6 +143,7 @@ PERL = perl DOC_DIR = doc/source DOC_TMP = $(DOC_DIR)/tmp DOC_STATUS = @DOC_STATUS@ +TIDY = tidy -modify -indent -wrap 78 --tidy-mark no # Program to do LF->CRLF # @@ -152,6 +155,10 @@ DOC_STATUS = @DOC_STATUS@ DOSFILTER = $(PERL) -p -e 's/\n/\r\n/' CVSROOT = :pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa #TMPDIR := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX) +# If your SF user name differs from your local one, +# change this to "ssh -l sf-username" +SSH = ssh +WWW_ROOT = /home/project-web/ijbswa ############################################################################# # Setup for make distribution for now. @@ -172,7 +179,7 @@ CONFIG_FILES = $(CONFIGS) \ DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \ `find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \ `find doc/webserver/ -name "*.css"` \ - privoxy.1 + $(MAN_PAGE) ############################################################################# # Filenames and libraries @@ -234,11 +241,11 @@ LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB) # possibly other OSs). SPECIAL_CFLAGS = @SPECIAL_CFLAGS@ -# Add your flags here -OTHER_CFLAGS = +# Add your flags here +OTHER_CFLAGS = CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \ - @STATIC_PCRE_ONLY@ -Ipcre + @STATIC_PCRE_ONLY@ -Ipcre LDFLAGS = @LDFLAGS@ $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS) @@ -270,8 +277,7 @@ PID_DEST check_doc install-strip uninstall GROUP_T # Strip master copy comments from default.action: ############################################################################# default.action: default.action.master - $(GREP) -v '^#MASTER#' $< > $@ - + $(GREP) -v '^#MASTER#' default.action.master > $@ ############################################################################# # Win32 config files ############################################################################# @@ -290,7 +296,7 @@ config.txt: config $(DOSFILTER) default.filter.txt && mv default.filter.txt default.filter trust.txt: trust - $(DOSFILTER) < $< > $@ + $(DOSFILTER) < $< > $@ ############################################################################# # Pre-dist check: @@ -318,9 +324,9 @@ dist-check: ############################################################################# # create tar.gz from CVS: -# This make-target is usually called through 'create-archive'. If you +# This make-target is usually called through 'create-archive'. If you # run 'make create-snapshot' without setting SNAPVERSION, you'll get a -# tar.gz with the current date in the name and as a releasenumber in the +# tar.gz with the current date in the name and as a releasenumber in the # spec-file. But the main usage is to run it as follows (Red Hat example): # make SNAPVERSION=1.6x create-snapshot # This creates a tar.gz. @@ -340,7 +346,7 @@ create-snapshot: ############################################################################# # looks at the version of Makefile and exports a corresponding source-tree -# example: if the Makefile has the sticky tag v_2_9_13, you'll get +# example: if the Makefile has the sticky tag v_2_9_13, you'll get # privoxy-*-2.4.13.tar.gz. ############################################################################# create-archive: @@ -361,7 +367,7 @@ gen-dist: dist-check # add config files for foo in $(CONFIG_FILES); do \ (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ - done; + done; # add documentation for foo in $(DOC_FILES); do \ (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ @@ -400,7 +406,7 @@ tarball-dist: dist-check clean clobber cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \ # and zip the archive - $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS) + $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS) $(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar @$(ECHO) Tarball distribution created. @@ -425,14 +431,14 @@ tarball-clean: ############################################################################# # developer manual -dok-devel: +dok-devel: $(RM) doc/webserver/developer-manual/*.html $(RM) -r doc/source/developer-manual mkdir -p doc/source/developer-manual cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/ # user manual -dok-user: +dok-user: $(RM) doc/webserver/user-manual/*.html $(RM) -r doc/source/user-manual/ mkdir -p doc/source/user-manual @@ -443,87 +449,83 @@ dok-user: $(PERL) -pi.bak -e 's/<\/head/\n\n<\/head/i' doc/webserver/user-manual/*html # faq -dok-faq: +dok-faq: $(RM) doc/webserver/faq/*.html $(RM) -r doc/source/faq mkdir -p doc/source/faq cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/ -# man page, one variation. Try to use the next target, just 'make man'. -dok-man: +# man page, one variation. Try to use the next target, just 'make man'. +dok-man: $(RM) doc/man/* doc/webserver/man-page/*.html -ifneq ($(MAN2HTML),false) - $(ECHO) "Privoxy Man page

NAME

" > doc/webserver/man-page/privoxy-man-page.html - man ./privoxy.1 | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html - $(ECHO) "" >> doc/webserver/man-page/privoxy-man-page.html -else - $(MAKE) groff2html -endif + echo MAN2HTML is $(MAN2HTML) + @if [ $(MAN2HTML) != "false" ]; then \ + $(ECHO) "Privoxy Man page

NAME

" > doc/webserver/man-page/privoxy-man-page.html; \ + man ./$(MAN_PAGE) | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html; \ + $(ECHO) "" >> doc/webserver/man-page/privoxy-man-page.html; \ + else \ + $(MAKE) groff2html; \ + fi; # Build man page from sgml. This requires the SGMLSpm perl module. -# See CPAN, or your favorite perl repository. This is the preferred +# See CPAN, or your favorite perl repository. This is the preferred # target for man page generation! man: dok-release mkdir -p doc/source/temp && cd doc/source/temp && $(RM) * ;\ nsgmls ../privoxy-man-page.sgml | sgmlspl ../../../utils/docbook2man/docbook2man-spec.pl &&\ - perl -pi.bak -e 's/ //; s/\[ /\[/g' privoxy.1 ;\ - perl -pi.bak -e "s/\[ /\[/g;s/á/\\\\['a]/g;s/é/\\\\['e]/g" privoxy.1; \ - perl -pi.bak -e "s/ö/\\\\[:o]/g" privoxy.1; \ - perl -pi.bak -e 's/([ {])-([a-z])/$$1\\-$$2/g' privoxy.1; \ - perl -pi.bak -e 's/ --([a-z])/ \\-\\-$$1/g' privoxy.1; \ - perl -pi.bak -e 's/\\fB--/\\fB\\-\\-/g' privoxy.1; \ - $(DB) ../privoxy-man-page.sgml && $(MV) -f privoxy.1 ../../../privoxy.1 + perl -pi.bak -e 's/ //; s/\[ /\[/g' $(MAN_PAGE) ;\ + perl -pi.bak -e "s/\[ /\[/g;s/á/\\\\['a]/g;s/é/\\\\['e]/g" $(MAN_PAGE); \ + perl -pi.bak -e "s/ö/\\\\[:o]/g" $(MAN_PAGE); \ + perl -pi.bak -e 's/([ {])-([a-z])/$$1\\-$$2/g' $(MAN_PAGE); \ + perl -pi.bak -e 's/ --([a-z])/ \\-\\-$$1/g' $(MAN_PAGE); \ + perl -pi.bak -e 's/\\fB--/\\fB\\-\\-/g' $(MAN_PAGE); \ + $(DB) ../privoxy-man-page.sgml && $(MV) -f $(MAN_PAGE) ../../../$(MAN_PAGE) # For those with man2html ala RH7s. man2html: mkdir -p doc/webserver/man-page -ifneq ($(MAN2HTML),false) - $(MAN2HTML) privoxy.1 |grep -v "^Content-type" > tmp.html - $(PERL) -pi.bak -e 's///; s//man2html/' tmp.html - $(PERL) -pi.bak -e 's/(<\/HEAD>)/<\/HEAD>/' tmp.html -# Twice because my version of man2html is pulling in commas and periods in URLs. - $(PERL) -pi.bak -e 's/()/$$1$$2/g' tmp.html - $(PERL) -pi.bak -e 's,\.">,">,g' tmp.html - $(PERL) -pi.bak -e "s/\['a\]/\á/g;s/\['e\]/\é/g" tmp.html -# Get rid of spurious  from conversion. (How to do this with perl?) - $(SED) -e 's///g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.* -else - $(MAKE) groff2html -endif - + @if [ $(MAN2HTML) != "false" ]; then \ + $(MAN2HTML) $(MAN_PAGE) |grep -v "^Content-type" > tmp.html; \ + $(PERL) -pi.bak -e 's///; s//man2html/' tmp.html; \ + $(PERL) -pi.bak -e 's/(<\/HEAD>)/<\/HEAD>/' tmp.html; \ + $(PERL) -pi.bak -e 's/()/$$1$$2/g' tmp.html; \ + $(PERL) -pi.bak -e 's,\.">,">,g' tmp.html; \ + $(PERL) -pi.bak -e "s/\['a\]/\á/g;s/\['e\]/\é/g" tmp.html; \ + $(SED) -e 's///g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.*; \ + else \ + $(MAKE) groff2html; \ + fi; # Otherwise we get plain groff conversion. groff2html: - $(G2H_CMD) ./privoxy.1 | $(SED) -e 's@@@' > doc/webserver/man-page/privoxy-man-page.html + $(G2H_CMD) ./$(MAN_PAGE) | $(SED) -e 's@@@' > doc/webserver/man-page/privoxy-man-page.html # readme page and INSTALL file dok-readme: dok-release cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html &&\ - env -u LANG $(WDUMP) tmp.html > ../../README ;\ + $(W3M_DUMP) tmp.html > ../../README ;\ $(DB)-notoc -V nochunks install.sgml > tmp.html &&\ - env -u LANG $(WDUMP) tmp.html > ../../INSTALL ;\ + $(W3M_DUMP) tmp.html > ../../INSTALL ;\ $(RM) tmp.* # index.sgml is used to create both the Home Page, and a local index # for documentation, etc. # # index.html for webserver: -dok-webserver: +dok-webserver: cd doc/source/webserver && $(DB)-notoc -ip-homepage -V nochunks index.sgml > ../../webserver/index.html $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\ s/<\/HEAD/\n<\/HEAD/;\ - s/<\/HEAD/\n<\/HEAD/;\ s/\.\d\. //;\ s/__copy/©/'\ doc/webserver/index.html && $(RM) doc/webserver/*.bak # privoxy-index.html for local documentation: -dok-index: +dok-index: cd doc/source/webserver && $(DB)-notoc -ip-index -V nochunks index.sgml > ../../webserver/privoxy-index.html $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\ s/<\/HEAD/\n<\/HEAD/;\ - s/<\/HEAD/\n<\/HEAD/;\ s/\.\d\. //;\ s/__copy/©/' \ doc/webserver/privoxy-index.html && $(RM) doc/webserver/*.bak @@ -533,8 +535,8 @@ dok: dok-release dok-devel dok-user dok-faq dok-readme dok-webserver dok-authors @$(ECHO) Documentation created. ## Make AUTHORS file -dok-authors: - cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && env -u LANG $(WDUMP) \ +dok-authors: + cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && $(W3M_DUMP_UTF8) \ tmp.html > ../../AUTHORS && $(RM) tmp.html # Set doc entities for VERSION and CODE_STATUS in sgml docs. Toggle content @@ -545,54 +547,52 @@ dok-release: s///' \ doc/source/*sgml doc/source/*/*sgml $(RM) -r doc/source/*bak doc/source/*/*bak -ifeq ($(CODE_STATUS),stable) - @$(ECHO) Setting docs to stable $(VERSION) - @$(PERL) -pi.bak -e 's///;\ - s///' \ - doc/source/*sgml doc/source/*/*sgml - $(RM) -r doc/source/*bak doc/source/*/*bak -else - @$(ECHO) Setting docs to not stable $(VERSION) - @$(PERL) -pi.bak -e 's///;\ - s///' \ - doc/source/*sgml doc/source/*/*sgml - $(RM) -r doc/source/*bak doc/source/*/*bak -endif + @if [ $(CODE_STATUS) = "stable" ]; then \ + $(ECHO) Setting docs to stable $(VERSION); \ + $(PERL) -pi.bak -e 's///;\ + s///' \ + doc/source/*sgml doc/source/*/*sgml; \ + else \ + $(ECHO) Setting docs to not stable $(VERSION); \ + $(PERL) -pi.bak -e 's///; \ + s///' \ + doc/source/*sgml doc/source/*/*sgml; \ + fi; + $(RM) -r doc/source/*bak doc/source/*/*bak; # Create release announcement in text and html, with short and long versions. # This is a standalone target, and must be invoked directly. # announce: dok-release # mkdir -p $(DOC_TMP) # cd $(DOC_TMP) && cp -f ../announce.sgml . && $(DB) -iannounce-big announce.sgml &&\ -# mv -f index.html announce.html && $(WDUMP) announce.html > announce.txt +# mv -f index.html announce.html && $(W3M_DUMP) announce.html > announce.txt # cd $(DOC_TMP) && $(DB) announce.sgml &&\ -# mv -f index.html announce-mini.html && $(WDUMP) announce-mini.html > announce-mini.txt &&\ -# mv -f *html *txt ../../.. +# mv -f index.html announce-mini.html && $(W3M_DUMP) announce-mini.html > announce-mini.txt &&\ +# mv -f *html *txt ../../.. # rm -fr $(DOC_TMP) -# The main Privoxy config file, generated from sgml sources. -# NOTE: This will require some hand editing. The new file is outputted -# as config.new so that problem sections can be compared to previous -# version. This is hardcored to w3m for html/text conversion. Also, -# requires the shell util 'fmt'. -config-file: dok-release - cd doc/source && $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\ - env -u LANG w3m -dump __tmp.html | fmt -w 70 > ../../config.new && $(RM) -r __tmp.* - $(PERL) -i.bak utils/prepare-configfile.pl config.new - - $(RM) *.bak +# The main Privoxy config file, generated from sgml sources. +# NOTE: This will require some hand editing. +config-file: dok-release generate-config-file + + $(RM) config.bak config.html @$(ECHO) "****************************************************" - @$(ECHO) "The output file is config.new." - @$(ECHO) "Now -- you need to hand edit the results!!!" + @$(ECHO) "The config file has been optimistically updated" + @$(ECHO) "Now -- you may need to hand edit the results!" @$(ECHO) "In particular, check the Debug levels, the" @$(ECHO) "permit-access, forward & socks examples and the" @$(ECHO) "various user-manual examples, which all" - @$(ECHO) "probably got hammered." + @$(ECHO) "might have gotten hammered." @$(ECHO) "****************************************************" +generate-config-file: + cd doc/source && $(DB)-notoc -iconfig-file -V nochunks config.sgml > ../../config.html + $(W3M_DUMP) -cols 67 config.html > config + $(PERL) -i.bak utils/prepare-configfile.pl config + # config file, alternate version using lynx (perl stuff unfinished). Lynx # does not do so good a job. -config-file-alt: +config-file-alt: cd doc/source && $(ECHO) -e ".h2 JUSTIFY\\nJUSTIFY:FALSE" > __tmp.lynx_cfg &&\ $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\ lynx -cfg=__tmp.lynx_cfg -width=78 -dump __tmp.html > ../../config.new && $(RM) -r __tmp.* @@ -606,46 +606,50 @@ config-file-alt: # moves dokumentation to webserver # ############################################################################# -webserver: tidy +webserver: clean-editor-files @$(ECHO) ------------------------------------------------------- @$(ECHO) You will need to "create" a SF shell first: - @$(ECHO) ssh -t USER,PROJECT@shell.sourceforge.net create + @$(ECHO) ssh -t SF-USER-ID,ijbswa@shell.sourceforge.net create @$(ECHO) Please make sure your documentation files are up to date. - @$(ECHO) Note that this command updates the home page and scps + @$(ECHO) Note that this command updates the home page and copys @$(ECHO) all stuff to the webserver, it will not remove obsolete documents. - @$(ECHO) You will also need to change the user-manual symlink manually. + @$(ECHO) Note that a botched upload can result in the documentation + @$(ECHO) on the website becoming unreachable! Also the CSS files + @$(ECHO) currently seem to end up at the wrong place. @$(ECHO) ------------------------------------------------------- + @$(ECHO) Replacing the user-manual symlink + @$(SSH) shell.sourceforge.net "cd $(WWW_ROOT)/htdocs && rm user-manual \ + && mkdir -p $(VERSION)/user-manual && ln -s $(VERSION)/user-manual user-manual" + @$(ECHO) Uploading html @cd doc/webserver; \ upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \ - $(TAR) cf - $$upload | ssh shell.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp' + $(TAR) cf - $$upload | $(SSH) shell.sourceforge.net 'cd $(WWW_ROOT)/htdocs/; tar xvm 2>&1 | grep -v timestamp' @$(ECHO) Fixing permissions - @ssh shell.sourceforge.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true' - @ssh shell.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true' - @ssh shell.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null; true' + @$(SSH) shell.sourceforge.net 'chmod -R 775 $(WWW_ROOT)/htdocs 2>/dev/null; true' + @$(SSH) shell.sourceforge.net 'find $(WWW_ROOT)/htdocs/ -type f | xargs chmod 664 2>/dev/null; true' - -web-actions: tidy - @$(ECHO) Uploading +web-actions: clean-editor-files + @$(ECHO) Uploading @cd doc/webserver/actions; \ upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \ - $(TAR) cf - $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm' + $(TAR) cf - $$upload | $(SSH) ijbswa.sourceforge.net 'cd $(WWW_ROOT)/htdocs/actions; tar xvm' @$(ECHO) Fixing permissions - @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null' - @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null' + @$(SSH) ijbswa.sourceforge.net 'find $(WWW_ROOT)/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null' + @$(SSH) ijbswa.sourceforge.net 'chmod 666 $(WWW_ROOT)/htdocs/actions/results/actions-feedback.txt 2>/dev/null' -## +## dok-put: tar --exclude ".cvsignore" --exclude "CVS" --exclude "source" --exclude ".htaccess" \ --exclude "obsolete" --exclude "actions" --exclude "*.zip" --exclude "robots.txt"\ doc/* INSTALL LICENSE AUTHORS README \ -czf $(DOC_FILE) ;\ $(ECHO) "Uploading doc package ..." ;\ - scp $(DOC_FILE) ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/docs/ - @ssh ijbswa.sourceforge.net 'chmod 775 /home/groups/i/ij/ijbswa/htdocs/docs/*gz 2>/dev/null; true' + scp $(DOC_FILE) ijbswa.sourceforge.net:$(WWW_ROOT)/htdocs/docs/ + @$(SSH) ijbswa.sourceforge.net 'chmod 775 $(WWW_ROOT)/htdocs/docs/*gz 2>/dev/null; true' $(RM) $(DOC_FILE) dok-get: @@ -653,6 +657,22 @@ dok-get: $(WGET) http://www.privoxy.org/docs/$(DOC_FILE) ;\ $(TAR) -zxvf $(DOC_FILE) +############################################################################# +# +# Try to clean up the generated HTML files. +# +# The files are a such a mess that some of them require two tidy runs +# in row as the first abort prematurely. The vanilla tidy output renders +# poorly as it contains a bit too much white-space, so we additionally run +# the files through perl to fix this again. +# +############################################################################# +dok-tidy: + for html_file in `find doc/webserver -name "*.html"`; do \ + $(TIDY) $$html_file || $(TIDY) $$html_file; \ + $(PERL) -i'' -e 's@^\s*
\s*$$@@; s@ +$$@@;' -n -p $$html_file; \ + done + ############################################################################# # Source file dependencies @@ -665,7 +685,7 @@ cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h lis deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS) encode.@OBJEXT@: encode.c encode.h config.h errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h -filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h urlmatch.h @WIN_ONLY@win32.h +filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h urlmatch.h @WIN_ONLY@win32.h gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h w32svrapi.h cgi.h @@ -681,12 +701,12 @@ urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h # PCRS -pcrs.@OBJEXT@: pcrs.c pcrs.h config.h @STATIC_PCRE_ONLY@pcre/pcre.h +pcrs.@OBJEXT@: pcrs.c pcrs.h config.h @STATIC_PCRE_ONLY@pcre/pcre.h # PCRE pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h -pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c +pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c pcre/pcreposix.@OBJEXT@: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h pcre/study.@OBJEXT@: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h @@ -723,22 +743,24 @@ $(PROGRAM): $(OBJS) $(W32_FILES) clean: $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) default.action \ - `find . -name TAGS -o -name tags | $(GREP) -v .git` config.base config.tmp + config.base config.tmp \ + `find . \( -name TAGS -o -name tags \) -and -not -path "./.git/refs/tags"` \ + `find . -name "*.orig" -a -not -name rc.privoxy.orig` -tidy: +clean-editor-files: $(RM) `find . -name "*~"` $(RM) `find . -name "#*#"` # Emacs backup files $(RM) `find . -name ".\#*"` -clobber: tidy +clobber: clean-editor-files $(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \ privoxy.log core *.tar.gz *.tar privoxy-cl.spec doc/source/ldp.dsl config.new $(RM) -r autom4te.cache # -# FIXME: What is all this? +# FIXME: What is all this? # - $(RM) cscope.* *.pdb *.lib *.exp + $(RM) cscope.* *.pdb *.lib *.exp distclean: clobber @@ -779,11 +801,11 @@ GROUP_T:=$(shell if [ x$(GROUP) = x ] && [ x$(USER) != x ];then \ install-strip: $(MAKE) install STRIP=-s -# FIXME: Test USER and GROUP on Slack to make sure this works as +# FIXME: Test USER and GROUP on Slack to make sure this works as # intended. # -# FIXME: id handling needs help, probably via configure, since 'id -u' is not -# universally reliable (eg Solaris). Group handling could be better. +# FIXME: id handling needs help, probably via configure, since 'id -u' is not +# universally reliable (eg Solaris). Group handling could be better. # Perhaps the whole user/group validation should be done here, and simplified. PROGRAM_V = Privoxy $(VERSION) $(CODE_STATUS) install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T @@ -791,7 +813,7 @@ install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T @if [ -n "$(USER)" ]; then \ $(ID) $(USER) >/dev/null || exit 1;\ fi - @# Test for valid group. FIXME. USER does not have to belong to GROUP + @# Test for valid group. FIXME. USER does not have to belong to GROUP @# for file ownership purposes. # if [ -n "$(GROUP_T)" ] && [ -n "$(USER)" ] && ! $(GROUPS) $(USER) | $(GREP) "\<$(GROUP_T)\>" >/dev/null; then \ # $(ECHO) Group $(GROUP_T) for User $(USER) is invalid && exit 1 ;\ @@ -837,8 +859,8 @@ install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC/user-manual;\ fi @# Not all platforms support gzipped man pages. - @$(ECHO) Installing man page to $(DESTDIR)$(MAN_DEST)/privoxy.1 - -$(INSTALL) $(INSTALL_T) privoxy.1 $(DESTDIR)$(MAN_DEST)/privoxy.1 + @$(ECHO) Installing man page to $(DESTDIR)$(MAN_DEST)/$(MAN_PAGE) + -$(INSTALL) $(INSTALL_T) $(MAN_PAGE) $(DESTDIR)$(MAN_DEST)/$(MAN_PAGE) @# Change the config file default directories according to the configured ones @$(ECHO) Rewriting config for this installation @@ -854,10 +876,10 @@ install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T $(SED) 's+^#\?user-manual .*+user-manual $(prefix)/doc/privoxy/user-manual/+' config.tmp >config.updated ;\ fi;\ $(MV) config config.base - $(MV) config.updated config + $(MV) config.updated config - @# Install the config support files. Test for root install, and abort - @# if there is no privoxy user, and no other user was enabled during + @# Install the config support files. Test for root install, and abort + @# if there is no privoxy user, and no other user was enabled during @# configure. Later, install init script if appropriate. @$(ECHO) Installing templates to $(DESTDIR)$(CONF_DEST)/templates @for i in `find templates -type f`; do \ @@ -986,7 +1008,7 @@ uninstall: CONF_DEST LOG_DEST PID_DEST check_doc @# man page and docs @$(ECHO) Removing $(PROGRAM) docs - -$(RM) $(DESTDIR)$(MAN_DEST)/privoxy.1* + -$(RM) $(DESTDIR)$(MAN_DEST)/$(MAN_PAGE)* -$(RM) -r $(DESTDIR)$(DOC_DEST) || $(RM) -r $(DESTDIR)$(prefix)/doc/privoxy @# Log and pidfile