X-Git-Url: http://www.privoxy.org/gitweb/?p=privoxy.git;a=blobdiff_plain;f=ChangeLog;h=c8e861d3e87844ce4802588b51b7f751114d82fc;hp=49cc00ae05474e8d5aee886fce9a95d48834f41d;hb=f3dc050591f3f1183fa9adc161d47c043388a299;hpb=4c8a010e3c7ec8e2cbc8fb68278f58f230747164 diff --git a/ChangeLog b/ChangeLog index 49cc00ae..c8e861d3 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,13 +1,311 @@ -------------------------------------------------------------------- ChangeLog for Privoxy -------------------------------------------------------------------- +*** Version 3.0.17 Stable *** + +- Fixed last-chunk-detection for responses where the content was small + enough to be read with the body, causing Privoxy to wait for the + end of the content until the server closed the connection or the + request timed out. Reported by "Karsten" in #3028326. +- Responses with status code 204 weren't properly detected as body-less + like RFC2616 mandates. Like the previous bug, this caused Privoxy to + wait for the end of the content until the server closed the connection + or the request timed out. Fixes #3022042 and #3025553, reported by a + user with no visible name. Most likely also fixes a bunch of other + AJAX-related problem reports that got closed in the past due to + insufficient information and lack of feedback. +- Fixed an ACL bug that made it impossible to build a blacklist. + Usually the ACL directives are used in a whitelist, which worked + as expected, but blacklisting is still useful for public proxies + where one only needs to deny known abusers access. +- Added LOG_LEVEL_RECEIVED to log the not-yet-parsed data read from the + network. This should make debugging various parsing issues a lot easier. +- The IPv6 code is enabled by default on Windows versions that support it. + Patch submitted by oCameLo in #2942729. +- In mingw32 versions, the user.filter file is reachable through the + GUI, just like default.filter is. Feature request 3040263. +- Added the configure option --enable-large-file-support to set a few + defines that are required by platforms like GNU/Linux to support files + larger then 2GB. Mainly interesting for users without proper logfile + management. +- Logging with "debug 16" no longer stops at the first nul byte which is + pretty useless. Non-printable characters are replaced with their hex value + so the result can't span multiple lines making parsing them harder then + necessary. +- Privoxy logs when reading an action, filter or trust file. +- Fixed incorrect regression test markup which caused a test in + 3.0.16 to fail while Privoxy itself was working correctly. + While Privoxy accepts hide-referer, too, the action name is actually + hide-referrer which is also the name used one the final results page, + where the test expected the alias. + +- CGI interface improvements: + - In finish_http_response(), continue to add the 'Connection: close' + header if the client connection will not be kept alive. + Anonymously pointed out in #2987454. + - Apostrophes in block messages no longer cause parse errors + when the blocked page is viewed with JavaScript enabled. + Reported by dg1727 in #3062296. + - Fix a bunch of anchors that used underscores instead of dashes. + - Allow to keep the client connection alive after crunching the previous request. + Already opened server connections can be kept alive, too. + - In cgi_show_url_info(), don't forget to prefix URLs that only contain + http:// or https:// in the path. Fixes #2975765 reported by Adam Piggott. + - Show the 404 CGI page if cgi_send_user_manual() is called while + local user manual delivery is disabled. + +- Action file improvements: + - Enable user.filter by default. Suggested by David White in #3001830. + - Block .sitestat.com/. Reported by johnd16 in #3002725. + - Block .atemda.com/. Reported by johnd16 in #3002723. + - Block js.adlink.net/. Reported by johnd16 in #3002720. + - Block .analytics.yahoo.com/. Reported by johnd16 in #3002713. + - Block sb.scorecardresearch.com, too. Reported by dg1727 in #2992652. + - Fix problems noticed on Yahoo mail and news pages. + - Remove the too broad yahoo section, only keeping the + fast-redirects exception as discussed on ijbswa-devel@. + - Don't block adesklets.sourceforge.net. Reported in #2974204. + - Block chartbeat ping tracking. Reported in #2975895. + - Tag CSS and image requests with cautious and medium settings, too. + - Don't handle view.atdmt.com as image. It's used for click-throughs + so users should be able to "go there anyway". + Reported by Adam Piggott in #2975927. + - Also let the refresh-tags filter remove invalid refresh tags where + the 'url=' part is missing. Anonymously reported in #2986382. + While at it, update the description to mention the fact that only + refresh tags with refresh times above 9 seconds are covered. + - javascript needs to be blocked with +handle-as-empty-document to + work around Firefox bug 492459. So move .js blockers from + +block{Might be a web-bug.} -handle-as-empty-document to + +block{Might be a web-bug.} +handle-as-empty-document. + - ijbswa-Feature Requests-3006719 - Block 160x578 Banners. + - Block another omniture tracking domain. + - Added a range-requests tagger. + - Added two sections to get Flickr's Ajax interface working with + default pre-settings. If you change the configuration to block + cookies by default, you'll need additional exceptions. + Reported by Mathias Homann in #3101419 and by Patrick on ijbswa-users@. + +- Documentation improvements: + - Explicitly mention how to match all URLs. + - Consistently recommend socks5 in the Tor FAQ entry and mention + its advantage compared to socks4a. Reported by David in #2960129. + - Slightly improve the explanation of why filtering may appear + slower than it is. + - Grammar fixes for the ACL section. + - Fixed a link to the 'intercepting' entry and add another one. + - Rename the 'Other' section to 'Mailing Lists' and reword it + to make it clear that nobody is forced to use the trackers + - Note that 'anonymously' posting on the trackers may not always + be possible. + - Suggest to enable debug 32768 when suspecting parsing problems. + +- Privoxy-Log-Parser improvements: + - Gather statistics for ressources, methods, and HTTP versions + used by the client. + - Also gather statistics for blocked and redirected requests. + - Provide the percentage of keep-alive offers the client accepted. + - Add a --url-statistics-threshold option. + - Add a --host-statistics-threshold option to also gather + statistics about how many request where made per host. + - Fix a bug in handle_loglevel_header() where a 'scan: ' got lost. + - Add a --shorten-thread-ids option to replace the thread id with + a decimal number. + - Accept and ignore: Looks like we got the last chunk together + with the server headers. We better stop reading. + - Accept and ignore: Continue hack in da house. + - Accept and higlight: Rejecting connection from 10.0.0.2. + Maximum number of connections reached. + - Accept and highlight: Loading actions file: /usr/local/etc/privoxy/default.action + - Accept and highlight: Loading filter file: /usr/local/etc/privoxy/default.filter + - Accept and highlight: Killed all-caps Host header line: HOST: bestproxydb.com + - Accept and highlight: Reducing expected bytes to 0. Marking + the server socket tainted after throwing 4 bytes away. + - Accept: Merged multiple header lines to: 'X-FORWARDED-PROTO: http X-HOST: 127.0.0.1' + +- Code cleanups: + - Remove the next member from the client_state struct. Only the main + thread needs access to all client states so give it its own struct. + - Garbage-collect request_contains_null_bytes(). + - Ditch redundant code in unload_configfile(). + - Ditch LogGetURLUnderCursor() which doesn't seem to be used anywhere. + - In write_socket(), remove the write-only variable write_len in + an ifdef __OS2__ block. Spotted by cppcheck. + - In connect_to(), don't declare the variable 'flags' on OS/2 where + it isn't used. Spotted by cppcheck. + - Limit the scope of various variables. Spotted by cppcheck. + - In add_to_iob(), turn an interestingly looking for loop into a + boring while loop. + - Code cleanup in preparation for external filters. + - In listen_loop(), mention the socket on which we accepted the + connection, not just the source IP address. + - In write_socket(), also log the socket we're writing to. + - In log_error(), assert that escaped characters get logged + completely or not at all. + - In log_error(), assert that ival and sval have reasonable values. + There's no reason not to abort() if they don't. + - Remove an incorrect cgi_error_unknown() call in a + cannnot-happen-situation in send_crunch_response(). + - Clean up white-space in http_response definition and + move the crunch_reason to the beginning. + - Turn http_response.reason into an enum and rename it + to http_response.crunch_reason. + - Silence a 'gcc (Debian 4.3.2-1.1) 4.3.2' warning on i686 GNU/Linux. + - Fix white-space in a log message in remove_chunked_transfer_coding(). + While at it, add a note that the message doesn't seem to + be entirely correct and should be improved later on. + +- GNUmakefile improvements: + - Use $(SSH) instead of ssh, so one only needs to specify a username once. + - Removed references to the action feedback thingy that hasn't been + working for years. + - Consistently use shell.sourceforge.net instead of shell.sf.net so + one doesn't need to check server fingerprints twice. + - Removed GNUisms in the webserver and webactions targets so they + work with standard tar. + +*** Version 3.0.16 Stable *** + +- Added the config file option handle-as-empty-doc-returns-ok to + work around Firefox bug #492459, which causes Firefox to hang + if JavaScripts are blocked in certain situations. The option is + enabled in the default config file. +- Added the config file option default-server-timeout to control the + assumed default server timeout. Since Privoxy no longer returns + an error message for connection resets on reused client connections, + assuming larger server timeout values appears to actually work + pretty well as long as connections aren't shared. +- Added optional support for FreeBSD's accf_http(9). Use the + configure option --enable-accept-filter to enable it. +- Added fancier Privoxy icons for win32. Contributed by Jeff H. +- In daemon mode, fd 0, 1 and 2 are bound to /dev/null. +- Resolve localhost using whatever address family the operating + system feels like. Previous betas would try to use IPv4 as this + is what most users expect, but this didn't work reliably on + GNU/Linux systems. +- In the action lists on CGI pages, actions and their parameters are + no longer separated with a space. The action file parser doesn't + actually allow this and will throw an invalid syntax error if actions + and parameters in the action files are separated. Not adding the + spaces means copy and pasting CGI output into the action files works. +- The default keep-alive timeout has been reduced to 5 seconds to work + around hangs in clients that treat the proxy like any other host and + stop allowing any new connections if the "maximum number of + connections per host" is reached. +- Several webbug URLs that look like they are leading to images are now + blocked as image instead of empty documents. Doing the latter causes + WebKit-based clients to show a "missing image" icon which may mess up + the layout. +- The no-such-domain template is used for DNS resolution + problems with FEATURE_IPV6_SUPPORT enabled. Previously the + connect-failed template was used. Reported by 'zebul666'. +- Accepts quoted expiration dates even though RFC 2109 10.1.2 + doesn't seem to allow them. Reported anonymously. +- Don't try to forget connections if connection sharing is disabled. + This wasn't a real problem but caused an unnecessary log message. +- The still undocumented --enable-extended-host-patterns configure + option has a better description. +- Fixed an error message that would claim a write to the server + failed when actually writing to the client failed. +- Log the crunch reason before trying to write to the client. + The log is easier to read that way. +- Several log messages about client connections also mention + the socket number. +- handle-as-empty-document no longer depends on the image blocking + code being enabled. +- Privoxy-Log-Parser is roughly 40% faster in highlighting mode. +- uagen, a Firefox User-Agent generator for Privoxy and Mozilla + browsers has been imported and is available in the tarball's + tools directory. +- The scripts in the tools directory treat unknown parameters + as fatal errors. + +*** Version 3.0.15 Beta *** + +- In case of missing server data, no error message is send to the + client if the request arrived on a reused connection. The client + is then supposed to silently retry the request without bothering + the user. This should significantly reduce the frequency of the + "No server or forwarder data received" error message many users + reported. +- More reliable detection of prematurely closed client sockets + with keep-alive enabled. +- FEATURE_CONNECTION_KEEP_ALIVE is decoupled from + FEATURE_CONNECTION_SHARING and now available on + all platforms. +- Improved handling of POST requests on reused connections. + Should fix problems with stalled connections after submitting + form data with some browser configurations. +- Fixed various latency calculation issues. +- Allows the client to pass NTLM authentication requests to a + forwarding proxy. This was already assumed and hinted to work + in 3.0.13 beta but actually didn't. Now it's confirmed to work + with IE, Firefox and Chrome. + Thanks to Francois Botha and Wan-Teh Chang +- Fixed a calculation problem if receiving the server headers + takes more than two reads, that could cause Privoxy to terminate + the connection prematurely. Reported by Oliver. +- Compiles again on platforms such as OpenBSD and systems + using earlier glibc version that don't support AI_ADDRCONFIG. + Anonymously submitted in #2872591. +- A bunch of MS VC project files and Suse and Redhat RPM spec + files have been removed as they were no longer maintained for + quite some time. +- Overly long action lines are properly rejected with a proper + error message. Previously they would be either rejected as + invalid or cause a core dump through abort(). +- Already timed-out connections are no longer temporarily remembered. + They weren't reused anyway, but wasted a socket slot. +- len refers to the number of bytes actually read which might + differ from the ones received. Adjust log messages accordingly. +- The optional JavaScript on the CGI page uses encodeURIComponent() + instead of escape() which doesn't encode all characters that matter. + Anonymously reported in #2832722. +- Fix gcc45 warnings in decompress_iob(). +- Various log message improvements. +- Privoxy-Regression-Test supports redirect tests. +- Privoxy-Log-Parser can gather some connection statistics. + +*** Version 3.0.14 Beta *** + +- The latency is taken into account when evaluating whether or not to + reuse a connection. This should significantly reduce the number of + connections problems several users reported. +- If the server doesn't specify how long the connection stays alive, + Privoxy errs on the safe side of caution and assumes it's only a second. +- The error pages for connection timeouts or missing server data use a + Last-Modified date in the past. Retry attempts are detected and Privoxy + removes the If-Modified-Since header to prevent the server from responding + with status code 304 in which case the client would reuse the error message. +- Setting keep-alive-timeout to 0 disables keep-alive support. Previously + Privoxy would claim to allow persistence but not reuse the connection. +- Pipelined requests are less likely to be mistaken for the request + body of the previous request. Note that Privoxy still has no real + pipeline support and will either serialize pipelined requests or + drop them in which case the client has to resent them. +- Fixed a crash on some Windows versions when header randomization + is enabled and the date couldn't be parsed. +- Privoxy's keep-alive timeout for the current connection is reduced + to the one specified in the client's Keep-Alive header. +- For HTTP/1.1 requests, Privoxy implies keep-alive support by not + setting any Connection header instead of using 'Connection: keep-alive'. +- If the socket isn't reusable, Privoxy doesn't temporarily waste + a socket slot to remember the connection. +- If keep-alive support is disabled but compiled in, the client's + Keep-Alive header is removed. +- Fixed a bug on mingw32 where downloading large files failed if + keep-alive support was enabled. +- Fixed a bug that (at least theoretically) could cause log + timestamps to be occasionally off by about a second. +- No Proxy-Connection header if added if there already is one. +- The configure script respects the $PATH variable when searching + for groups and id. + *** Version 3.0.13 Beta *** - Added IPv6 support. Thanks to Petr Pisar who not only provided the initial patch but also helped a lot with the integration. -- Added client-side keep-alive support. This should also allow - NTLM authentication through Privoxy, but this hasn't been - confirmed yet. +- Added client-side keep-alive support. - The connection sharing code is only used if the connection-sharing option is enabled. - The max-client-connections option has been added to restrict @@ -40,7 +338,7 @@ ChangeLog for Privoxy the still-open connection will be reused for the client's next request to the same destination. Note that this only matters if connection-sharing is enabled. -- A TODO list has been added to the source tarballs to give potential +- A TODO list has been added to the source tarball to give potential volunteers a better idea of what the current goals are. Donations are still welcome too: http://www.privoxy.org/faq/general.html#DONATE @@ -79,7 +377,7 @@ ChangeLog for Privoxy skip reason. *** Version 3.0.11 *** - + - On most platforms, outgoing connections can be kept alive and reused if the server supports it. Whether or not this improves things depends on the connection. @@ -294,7 +592,7 @@ ChangeLog for Privoxy forbidden characters like dots. - New trust entries are saved with a comment that contains the trusted referring URL (Suggested by Daniel Griscom). -- Filter descriptions are HTML encoded automatically. +- Filter descriptions are HTML encoded automatically. - New config option "split-large-forms" to work around a browser bug that caused IE6 and IE7 to ignore the Submit button on the edit-actions-for-url CGI page. @@ -333,11 +631,11 @@ ChangeLog for Privoxy Privoxy detection "attack". Note that detecting Privoxy is still possible through other ways and Privoxy was never intended to be invisible anyway. -- Added support for AmigaOS 4, fixed build for AmigaOS 3.x. +- Added support for AmigaOS 4, fixed build for AmigaOS 3.x. - The show-url-info CGI page displays a warning if Privoxy is currently toggled off. - The show-status CGI page suppresses the edit button - for action files if Privoxy has no write access. + for action files if Privoxy has no write access. - Most CGI error pages react properly to HEAD requests. - Requests with RFC 3253 HTTP methods (used by Subversion) are accepted. (Patch provided by Petr Kadlec) @@ -412,18 +710,18 @@ ChangeLog for Privoxy - Improved the filters img-reorder, js-annoyances, webbugs, banners-by-size, banners-by-link and ie-exploits to make them less likely to break anything. -- Removed outdated URL patterns in default.action and added new ones. +- Removed outdated URL patterns in default.action and added new ones. - Added redirection from http://p.p/user-manual to http://p.p/user-manual/ - Changed webinterface default values for hide-user-agent, hide-referrer and set-image-blocker. - + *** Version 3.0.5 Beta *** - Windows version can be installed/started as a service. - Windows icon stays blue when Privoxy is idle, green when busy. - Integrated Fabian Keil's extensive patch. See: - http://www.fabiankeil.de/sourcecode/privoxy/. Includes the - following new or significantly improved actions (among many + http://www.fabiankeil.de/sourcecode/privoxy/. Includes the + following new or significantly improved actions (among many other improvements): content-type-overwrite{} @@ -451,17 +749,17 @@ ChangeLog for Privoxy - Added jpeg filtering to defend against MS jpeg vulnerability MS04-028 with the new inspect-jpegs action. - Removed the "arbitrary" 1000 filter limit - addresses tracker #911950 -- Thanks to Jindrich Makovicka for a race condition fix for the log +- Thanks to Jindrich Makovicka for a race condition fix for the log file. The race condition remains for non-pthread implementations. Reference patch #1175720. Various other logging enhancements. - A pile of assorted bug fixes, memory leaks, enhancements, etc. - Moved Actions file reporting mechanism to SF tracker. -- Two new options for config: enable-remote-http-toggle and +- Two new options for config: enable-remote-http-toggle and forwarded-connect-retries. - Trap unsupported FTP requests. - Let text/xml be filtered. - Numerous updates to default.action -- Increase the compiled in limit of trusted referrers from 64 to 512 +- Increase the compiled in limit of trusted referrers from 64 to 512 (for trustfile users). *** Version 3.0.3 *** @@ -478,15 +776,15 @@ ChangeLog for Privoxy - Workarounds for client (iTunes etc) and server (PHP < 4.2.3) bugs including the notorious "blank page" problem. - Various filter improvements; most notably the unsolicited-popups - filter became less destructive + filter became less destructive - Major revamp of the actions file - + *** Version 3.0.2 *** - Fixed two memory leaks, one serious - Fixed bug in pcrs which could cause crashes with user-defined filters - Fixed bug in domain name matching -- Assorted small fixes (Win32 menu, CGI URL editor, ..) +- Assorted small fixes (Win32 menu, CGI URL editor, ..) - Added basic support for the OPTIONS and TRACE http methods - Added workaround for Bug in Mac OSX that made Privoxy crash occasionally - Refined the default action file through >400 items of user feedback @@ -497,7 +795,7 @@ ChangeLog for Privoxy - Replaced filter "popups" by choice between two modes: - "unsolicited-popups" tries to catch only the unsolicited ones - "all-popups" tries to kill them all (as before) - - New filter "tiny-textforms" Help those tiny or hard-wrap textareas. + - New filter "tiny-textforms" Help those tiny or hard-wrap textareas. - New filter "jumping-windows" that prevents windows from resizing and moving themselves - New filter "demoronizer" which fixes MS's abuse of std charsets @@ -521,7 +819,7 @@ ChangeLog for Privoxy - Added quicktime-kioskmode filter and improved frameset-borders - Updated default.action based on latest feedback - New PDF doc build process -- Add a user contrib module to cvs: +- Add a user contrib module to cvs: http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/ijbswa/contrib/ *** Version 2.9.18 *** @@ -531,7 +829,7 @@ ChangeLog for Privoxy - Three filters fixed (again!) - Assorted small fixes and doc enhancements -*** Version 2.9.16 *** +*** Version 2.9.16 *** - Major revamp of default.action to get rid of years of cruft. - Same for default.filter @@ -543,11 +841,11 @@ ChangeLog for Privoxy - user-manual directive added to config for help links from within CGI editor. - Multiple actions files can now be specified in config. -- Actions files are changed to: default.action, standard.action, and +- Actions files are changed to: default.action, standard.action, and user.action. user.action is for personal/local configuration. - The usual many small and miscellaneous bug and security fixes. -*** Version 2.9.14 Beta *** +*** Version 2.9.14 Beta *** - Fix Solaris compile problem (gateway.h and filters.h) - Makefile fixes for Solaris, FreeBSD (?) @@ -561,30 +859,30 @@ ChangeLog for Privoxy - #include mechansim for common text in templates - Various other minor fixes. -*** Version 2.9.13 Beta *** +*** Version 2.9.13 Beta *** -- *NEWS*: The project has been renamed to Privoxy! The new name is +- *NEWS*: The project has been renamed to Privoxy! The new name is reflected throughout (file locations, etc). -- ijb.action is now default.action. re_filterfile is now +- ijb.action is now default.action. re_filterfile is now default.filter. - http://i.j.b/ is now http://p.p/ -- The 'logo' option for replacing ad iamges is removed now. 'Pattern' +- The 'logo' option for replacing ad iamges is removed now. 'Pattern' (checkerboard) is now the default. - RPM spec file make over. -*** Version 2.9.12 Beta *** +*** Version 2.9.12 Beta *** -- **READ**: The default listening PORT is NOW 8118!!! Changed from - 8000 due to conflict with NAS (Network Audio Server, whatever that +- **READ**: The default listening PORT is NOW 8118!!! Changed from + 8000 due to conflict with NAS (Network Audio Server, whatever that is.) - More CGI actions editor fixes and improvements. - Win32 command line fix ups. -- re_filterfile now has modular sections that can be activated on a +- re_filterfile now has modular sections that can be activated on a per site basis. Some new goodies there too. - +filter now takes arguments to match FILTER sections in re_filterfile - for even more flexibility. -- Added a new image blocker option: +image-blocker{pattern}, which + for even more flexibility. +- Added a new image blocker option: +image-blocker{pattern}, which displays a checkerboard patthern and scales better than the logo. - PNG images will be used in place of GIF for JB built-in images if configured with --enable-no-gif. @@ -597,14 +895,14 @@ ChangeLog for Privoxy - CGI Editor works on OS/2 now. - Fix restart failure where sockets were in TIME_WAIT. - Fixes for actions cgi editor, make sure we have right file. -- A --pidfile command line option now, in addition to --help, +- A --pidfile command line option now, in addition to --help, --version, --no-daemon, --user and configfile. --no-daemon replaces - the former -d option and _DEBUG define. --user will drop privileges + the former -d option and _DEBUG define. --user will drop privileges to the specified user. - Signal handling cleanups (*nix). - CGI actions editor improvements and fixes. - Error handling improvements, especially out of memory. -- Default re_filterfile fix that caused spurious IJB logos +- Default re_filterfile fix that caused spurious IJB logos (instead of 'blank'). - configure.in threading fixes for Solaris. - Various other minor fixes. @@ -612,14 +910,14 @@ ChangeLog for Privoxy *** Version 2.9.11 Beta Changes *** -- Add "session" cookie concept where cookies exist for the life -of that browser session only (ie never goes to disk). +- Add "session" cookie concept where cookies exist for the life + of that browser session only (ie never goes to disk). - Checks for correct header length. - Fix user:pass@host.domain.com auth bug. - Better signal handling on *nix. - Fix CFLAGS hard-coded in configure.in -- Fix threading bug re: gethostbyname() that caused random -URLs to fail in some cases. +- Fix threading bug re: gethostbyname() that caused random + URLs to fail in some cases. *** Version 2.9.11 Alpha Changes *** @@ -659,7 +957,7 @@ The only other URLs left are the GNU GPL: and the home page: http://ijbswa.sourceforge.net/ ... and various URLs which will be intercepted by Junkbuster anyway. -TODO: Still need to do something with the URLs in Junkbuster Corp's +TODO: Still need to do something with the URLs in Junkbuster Corp's copyright/trademark notice on the bottom of the show-proxy-args page. - PCRE or GNU Regex is now a #define option. @@ -683,7 +981,7 @@ parsers.c (again). They obviously got lost in our current patch war ;-) - Cut the credit for the ยง-referrer-option from the config file, that Stefan had placed there. -- Improved the re_filterfile +- Improved the re_filterfile *** Version 2.9.0 pre-Alpha Changes *** @@ -691,9 +989,9 @@ that Stefan had placed there. - Now use PCRE, not GNU REGEX. I have not yet had chance to check the syntax of the block/image/cookie file to ensure that they match what is expected - however they seem to work. -- Replaced "configure" script with one generated by "autoconf". Also -use a header "config.h" (was ijbconfig.h in my previous release) for -the #defines. "config.h" is now generated with "autoheader" from +- Replaced "configure" script with one generated by "autoconf". Also +use a header "config.h" (was ijbconfig.h in my previous release) for +the #defines. "config.h" is now generated with "autoheader" from "acconfig.h" and "configure.in". (Note that to install you do not need autoconf or autoheader - just run "./configure".) To see command-line options, run "./configure --help". @@ -706,7 +1004,7 @@ apply all of these, since I had already independently done conditional popup file, conditional image file, and integration of popup code. - ACL, Jar and trust files conditionally compiled. - New source file headers. -- Various cosmetic changes. (But I have not consistently ordered the +- Various cosmetic changes. (But I have not consistently ordered the config files - I think that's worthwhile, but it's 1am and I want to get this released!) - RCS tags on .h files. @@ -732,16 +1030,15 @@ being a mix of "U.S. English", "U.K. English" and "Irish English". - Version number changes to 2.9.0 - ---------------------------------------------------------------------- -Copyright : Written by and Copyright (C) 2001-2008 the SourceForge +Copyright : Written by and Copyright (C) 2001-2010 the Privoxy team. http://www.privoxy.org/ Based on the Internet Junkbuster originally written - by and Copyright (C) 1997 Anonymous Coders and + by and Copyright (C) 1997 Anonymous Coders and Junkbusters Corporation. http://www.junkbusters.com/ - This program is free software; you can redistribute it + This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at