-const char jcc_rcs[] = "$Id: jcc.c,v 1.149 2007/09/04 15:08:48 fabiankeil Exp $";
+const char jcc_rcs[] = "$Id: jcc.c,v 1.245 2009/04/24 15:29:43 fabiankeil Exp $";
/*********************************************************************
*
* File : $Source: /cvsroot/ijbswa/current/jcc.c,v $
* Purpose : Main file. Contains main() method, main loop, and
* the main connection-handling function.
*
- * Copyright : Written by and Copyright (C) 2001-2007 the SourceForge
+ * Copyright : Written by and Copyright (C) 2001-2009 the SourceForge
* Privoxy team. http://www.privoxy.org/
*
* Based on the Internet Junkbuster originally written
*
* Revisions :
* $Log: jcc.c,v $
+ * Revision 1.245 2009/04/24 15:29:43 fabiankeil
+ * Allow to limit the number of of client connections.
+ *
+ * Revision 1.244 2009/04/17 11:34:34 fabiankeil
+ * Style cosmetics for the IPv6 code.
+ *
+ * Revision 1.243 2009/04/17 11:27:49 fabiankeil
+ * Petr Pisar's privoxy-3.0.12-ipv6-3.diff.
+ *
+ * Revision 1.242 2009/04/11 10:44:47 fabiankeil
+ * Update a comment. We're not in Kansas anymore.
+ *
+ * Revision 1.241 2009/04/11 10:37:23 fabiankeil
+ * When dropping connections due to ACL, don't leak csp->ip_addr_str.
+ *
+ * Revision 1.240 2009/04/09 10:12:54 fabiankeil
+ * Fix two cases in which an invalid server response would result
+ * in the client connection being closed without sending an error
+ * message first.
+ *
+ * Revision 1.239 2009/04/07 11:43:50 fabiankeil
+ * If the server rudely resets the connection directly after sending the
+ * headers, pass the mess to the client instead of sending an incorrect
+ * connect-failed message. Fixes #2698674 reported by mybugaccount.
+ *
+ * Revision 1.238 2009/03/27 14:42:30 fabiankeil
+ * Correct the status code for CONNECTION_TIMEOUT_RESPONSE.
+ *
+ * Revision 1.237 2009/03/27 14:32:04 fabiankeil
+ * If spawning a child in listen_loop() fails, send a real
+ * HTTP response to the client and continue listening for
+ * new connections without artificial delay.
+ *
+ * Revision 1.236 2009/03/25 17:30:24 fabiankeil
+ * In serve(), keep the client socket open until we marked the
+ * server socket as unused. This should increase the chances
+ * that we reuse the connection for the client's next request
+ * to the same destination.
+ *
+ * Revision 1.235 2009/03/18 21:01:20 fabiankeil
+ * Comment fix. Spotted by Roland.
+ *
+ * Revision 1.234 2009/03/18 20:48:42 fabiankeil
+ * If the --no-daemon option is used, enable LOG_LEVEL_INFO
+ * before the config file has been parsed (as we always did).
+ *
+ * Revision 1.233 2009/03/13 14:10:07 fabiankeil
+ * Fix some more harmless warnings on amd64.
+ *
+ * Revision 1.232 2009/03/08 19:29:16 fabiankeil
+ * Reinitialize the timeout structure every time before passing
+ * it to select(). Apparently some implementations mess with it.
+ * Probably fixes #2669131 reported by cyberpatrol.
+ *
+ * Revision 1.231 2009/03/08 14:19:23 fabiankeil
+ * Fix justified (but harmless) compiler warnings
+ * on platforms where sizeof(int) < sizeof(long).
+ *
+ * Revision 1.230 2009/03/07 13:09:17 fabiankeil
+ * Change csp->expected_content and_csp->expected_content_length from
+ * size_t to unsigned long long to reduce the likelihood of integer
+ * overflows that would let us close the connection prematurely.
+ * Bug found while investigating #2669131, reported by cyberpatrol.
+ *
+ * Revision 1.229 2009/03/07 11:17:01 fabiankeil
+ * Fix compiler warning.
+ *
+ * Revision 1.228 2009/03/06 20:30:13 fabiankeil
+ * Log unsigned values as such.
+ *
+ * Revision 1.227 2009/03/02 19:18:11 fabiankeil
+ * Streamline parse_http_request()'s prototype. As
+ * cparser pointed out it doesn't actually use csp.
+ *
+ * Revision 1.226 2009/03/01 18:28:24 fabiankeil
+ * Help clang understand that we aren't dereferencing
+ * NULL pointers here.
+ *
+ * Revision 1.225 2009/02/19 18:09:32 fabiankeil
+ * Unbreak build without FEATURE_CONNECTION_KEEP_ALIVE.
+ * Noticed by David.
+ *
+ * Revision 1.224 2009/02/14 15:32:04 fabiankeil
+ * Add the request URL to the timeout message in chat().
+ * Suggested by Lee.
+ *
+ * Revision 1.223 2009/02/09 21:21:16 fabiankeil
+ * Now that init_log_module() is called earlier, call show_version()
+ * later on from main() directly so it doesn't get called for --help
+ * or --version.
+ *
+ * Revision 1.222 2009/02/08 12:56:51 fabiankeil
+ * Call initialize_mutexes() before init_log_module() again.
+ * Broken since r220, might be the cause of Lee's #2579448.
+ *
+ * Revision 1.221 2009/02/06 18:02:58 fabiankeil
+ * When dropping privileges, also give up membership in supplementary
+ * groups. Thanks to Matthias Drochner for reporting the problem,
+ * providing the initial patch and testing the final version.
+ *
+ * Revision 1.220 2009/02/04 18:29:07 fabiankeil
+ * Initialize the log module before parsing arguments.
+ * Thanks to Matthias Drochner for the report.
+ *
+ * Revision 1.219 2009/01/31 16:08:21 fabiankeil
+ * Remove redundant error check in receive_client_request().
+ *
+ * Revision 1.218 2009/01/31 12:25:54 fabiankeil
+ * Flatten indentation in receive_client_request().
+ *
+ * Revision 1.217 2009/01/07 19:50:09 fabiankeil
+ * - If the socket-timeout has been reached and the client
+ * hasn't received any data yet, send an explanation before
+ * closing the connection.
+ * - In get_request_line(), signal timeouts the right way.
+ *
+ * Revision 1.216 2008/12/24 22:13:11 ler762
+ * fix GCC 3.4.4 warning
+ *
+ * Revision 1.215 2008/12/24 17:06:19 fabiankeil
+ * Keep a thread around to timeout alive connections
+ * even if no new requests are coming in.
+ *
+ * Revision 1.214 2008/12/20 14:53:55 fabiankeil
+ * Add config option socket-timeout to control the time
+ * Privoxy waits for data to arrive on a socket. Useful
+ * in case of stale ssh tunnels or when fuzz-testing.
+ *
+ * Revision 1.213 2008/12/15 18:45:51 fabiankeil
+ * When logging crunches, log the whole URL, so one can easily
+ * differentiate between vanilla HTTP and CONNECT requests.
+ *
+ * Revision 1.212 2008/12/14 15:46:22 fabiankeil
+ * Give crunched requests their own log level.
+ *
+ * Revision 1.211 2008/12/06 10:05:03 fabiankeil
+ * Downgrade "Received x bytes while expecting y." message to
+ * LOG_LEVEL_CONNECT as it doesn't necessarily indicate an error.
+ *
+ * Revision 1.210 2008/12/02 22:03:18 fabiankeil
+ * Don't miscalculate byte_count if we don't get all the
+ * server headers with one read_socket() call. With keep-alive
+ * support enabled, this caused delays until the server closed
+ * the connection.
+ *
+ * Revision 1.209 2008/11/27 09:44:04 fabiankeil
+ * Cosmetics for the last commit: Don't watch out for
+ * the last chunk if the content isn't chunk-encoded or
+ * if we already determined the content length previously.
+ *
+ * Revision 1.208 2008/11/26 18:24:17 fabiankeil
+ * Recognize that the server response is complete if the
+ * last chunk is read together with the server headers.
+ * Reported by Lee.
+ *
+ * Revision 1.207 2008/11/25 17:25:16 fabiankeil
+ * Don't convert the client-header list to text until we need to.
+ *
+ * Revision 1.206 2008/11/23 17:00:11 fabiankeil
+ * Some more chat() cosmetics.
+ *
+ * Revision 1.205 2008/11/16 12:43:49 fabiankeil
+ * Turn keep-alive support into a runtime feature
+ * that is disabled by setting keep-alive-timeout
+ * to a negative value.
+ *
+ * Revision 1.204 2008/11/06 19:42:17 fabiankeil
+ * Fix last-chunk detection hack to also apply
+ * if buf[] contains nothing but the last-chunk.
+ *
+ * Revision 1.203 2008/11/06 18:34:35 fabiankeil
+ * Factor receive_client_request() and
+ * parse_client_request() out of chat().
+ *
+ * Revision 1.202 2008/11/02 18:40:34 fabiankeil
+ * If we received a different amount of data than we expected,
+ * log a warning and make sure the server socket isn't reused.
+ *
+ * Revision 1.201 2008/11/02 16:48:20 fabiankeil
+ * Revert revision 1.195 and try again.
+ *
+ * Revision 1.200 2008/10/26 16:53:18 fabiankeil
+ * Fix gcc44 warning.
+ *
+ * Revision 1.199 2008/10/26 15:36:10 fabiankeil
+ * Remove two debug messages with LOG_LEVEL_INFO.
+ *
+ * Revision 1.198 2008/10/22 15:19:55 fabiankeil
+ * Once More, With Feeling: if there is no logfile
+ * because the user didn't specify one, we shouldn't
+ * call init_error_log() after receiving SIGHUP either.
+ *
+ * Revision 1.197 2008/10/20 17:02:40 fabiankeil
+ * If SIGHUP is received while we aren't running in daemon
+ * mode, calling init_error_log() would be a mistake.
+ *
+ * Revision 1.196 2008/10/16 09:16:41 fabiankeil
+ * - Fix two gcc44 conversion warnings.
+ * - Don't bother logging the last five bytes
+ * of the 0-chunk.
+ *
+ * Revision 1.195 2008/10/13 16:04:37 fabiankeil
+ * Make sure we don't try to reuse tainted server sockets.
+ *
+ * Revision 1.194 2008/10/12 18:35:18 fabiankeil
+ * The last commit was a bit too ambitious, apparently the content
+ * length adjustment is only necessary if we aren't buffering.
+ *
+ * Revision 1.193 2008/10/12 15:57:35 fabiankeil
+ * Fix content length calculation if we read headers
+ * and the start of the body at once. Now that we have
+ * FEATURE_CONNECTION_KEEP_ALIVE, it actually matters.
+ *
+ * Revision 1.192 2008/10/11 18:19:14 fabiankeil
+ * Even more chat() cosmetics.
+ *
+ * Revision 1.191 2008/10/11 18:00:14 fabiankeil
+ * Reformat some comments in chat().
+ *
+ * Revision 1.190 2008/10/11 14:58:00 fabiankeil
+ * In case of chunk-encoded content, stop reading if
+ * the buffer looks like it ends with the last chunk.
+ *
+ * Revision 1.189 2008/10/11 09:53:00 fabiankeil
+ * Let server_response_is_complete() deal properly with
+ * content that is neither buffered nor read all at once.
+ *
+ * Revision 1.188 2008/10/09 18:21:41 fabiankeil
+ * Flush work-in-progress changes to keep outgoing connections
+ * alive where possible. Incomplete and mostly #ifdef'd out.
+ *
+ * Revision 1.187 2008/09/07 12:35:05 fabiankeil
+ * Add mutex lock support for _WIN32.
+ *
+ * Revision 1.186 2008/09/04 08:13:58 fabiankeil
+ * Prepare for critical sections on Windows by adding a
+ * layer of indirection before the pthread mutex functions.
+ *
+ * Revision 1.185 2008/08/30 12:03:07 fabiankeil
+ * Remove FEATURE_COOKIE_JAR.
+ *
+ * Revision 1.184 2008/08/22 15:34:45 fabiankeil
+ * - Silence LLVM/Clang complaint.
+ * - Make received_hup_signal static.
+ * - Hide definitions for basedir, pidfile and received_hup_signal
+ * from __EMX__ as they only seem to be used in case of #ifdef unix.
+ *
+ * Revision 1.183 2008/08/21 07:09:35 fabiankeil
+ * Accept Shoutcast responses again. Problem reported
+ * and fix suggested by Stefan in #2062860.
+ *
+ * Revision 1.182 2008/06/27 11:13:56 fabiankeil
+ * Fix possible NULL-pointer dereference reported
+ * by din_a4 in #2003937. Pointy hat to me.
+ *
+ * Revision 1.181 2008/05/21 15:47:15 fabiankeil
+ * Streamline sed()'s prototype and declare
+ * the header parse and add structures static.
+ *
+ * Revision 1.180 2008/05/21 15:26:32 fabiankeil
+ * - Mark csp as immutable for send_crunch_response().
+ * - Fix comment spelling.
+ *
+ * Revision 1.179 2008/05/20 20:13:32 fabiankeil
+ * Factor update_server_headers() out of sed(), ditch the
+ * first_run hack and make server_patterns_light static.
+ *
+ * Revision 1.178 2008/05/10 13:23:38 fabiankeil
+ * Don't provide get_header() with the whole client state
+ * structure when it only needs access to csp->iob.
+ *
+ * Revision 1.177 2008/05/10 11:51:12 fabiankeil
+ * Make the "read the rest of the headers" loop a bit more readable.
+ *
+ * Revision 1.176 2008/05/10 11:37:57 fabiankeil
+ * - Instead of logging when the IIS5 hack is enabled, log when it fails.
+ * - Remove useless comment.
+ *
+ * Revision 1.175 2008/05/09 18:53:59 fabiankeil
+ * Fix comment grammar.
+ *
+ * Revision 1.174 2008/05/07 18:05:53 fabiankeil
+ * Remove the pointless buffer in client_protocol_is_unsupported().
+ *
+ * Revision 1.173 2008/05/06 15:09:00 fabiankeil
+ * Least-effort fix for bug #1821930 (reported by Lee):
+ * If the response doesn't look like HTTP,
+ * tell the client and log the problem.
+ *
+ * Revision 1.172 2008/04/16 16:38:21 fabiankeil
+ * Don't pass the whole csp structure to flush_socket()
+ * when it only needs a file descriptor and a buffer.
+ *
+ * Revision 1.171 2008/03/27 18:27:25 fabiankeil
+ * Remove kill-popups action.
+ *
+ * Revision 1.170 2008/03/06 16:33:46 fabiankeil
+ * If limit-connect isn't used, don't limit CONNECT requests to port 443.
+ *
+ * Revision 1.169 2008/03/04 18:30:39 fabiankeil
+ * Remove the treat-forbidden-connects-like-blocks action. We now
+ * use the "blocked" page for forbidden CONNECT requests by default.
+ *
+ * Revision 1.168 2008/03/02 12:25:25 fabiankeil
+ * Also use shiny new connect_port_is_forbidden() in jcc.c.
+ *
+ * Revision 1.167 2008/02/23 16:57:12 fabiankeil
+ * Rename url_actions() to get_url_actions() and let it
+ * use the standard parameter ordering.
+ *
+ * Revision 1.166 2008/02/23 16:33:43 fabiankeil
+ * Let forward_url() use the standard parameter ordering
+ * and mark its second parameter immutable.
+ *
+ * Revision 1.165 2008/02/02 19:36:56 fabiankeil
+ * Remove the "Listening ... for local connections only" log message.
+ * Whether or not remote connections are able to reach Privoxy is up
+ * to the operating system.
+ *
+ * Revision 1.164 2007/12/16 18:32:46 fabiankeil
+ * Prevent the log messages for CONNECT requests to unacceptable
+ * ports from printing the limit-connect argument as [null] if
+ * limit-connect hasn't been explicitly enabled.
+ *
+ * Revision 1.163 2007/12/13 01:47:11 david__schmidt
+ * Make sure all console-mode apps get a usage() instance
+ *
+ * Revision 1.162 2007/12/06 17:54:57 fabiankeil
+ * Reword NO_SERVER_DATA_RESPONSE to make it harder
+ * to misunderstand what the message is all about.
+ *
+ * Revision 1.161 2007/12/04 19:44:22 fabiankeil
+ * Unbreak trustfile which previously didn't work without
+ * FEATURE_TOGGLE. Fixes BR#1843585, reported by Lee.
+ *
+ * Revision 1.160 2007/11/29 18:00:29 fabiankeil
+ * Plug memory leak. Spotted by Valgrind, triggered by
+ * Privoxy-Regression-Test feeding proxyfuzz.py.
+ *
+ * Revision 1.159 2007/11/24 14:34:09 fabiankeil
+ * In the HTTP snipplets, refer to the client as client.
+ *
+ * Revision 1.158 2007/11/11 16:44:17 fabiankeil
+ * Emit a log message when activating the MS IIS5 hack.
+ *
+ * Revision 1.157 2007/11/03 17:34:49 fabiankeil
+ * Log the "weak randomization factor" warning only
+ * once for mingw32 and provide some more details.
+ *
+ * Revision 1.156 2007/11/01 18:20:58 fabiankeil
+ * Initialize log module after initializing mutexes, future
+ * deadlocks in that code should now work cross-platform.
+ *
+ * Revision 1.155 2007/10/23 20:12:45 fabiankeil
+ * Fix first CSUCCEED line to end in \r\n as required by RFC1945.
+ * Reported by Bert van Leeuwen in BR#1818808.
+ *
+ * Revision 1.154 2007/10/19 17:00:08 fabiankeil
+ * Downgrade "Flushing header and buffers" message to LOG_LEVEL_INFO.
+ *
+ * Revision 1.153 2007/10/14 14:12:41 fabiankeil
+ * When in daemon mode, close stderr after the configuration file has been
+ * parsed the first time. If logfile isn't set, stop logging. Fixes BR#897436.
+ *
+ * Revision 1.152 2007/10/04 18:03:34 fabiankeil
+ * - Fix a crash when parsing invalid requests whose first header
+ * is rejected by get_header(). Regression (re?)introduced
+ * in r1.143 by yours truly.
+ * - Move ACTION_VANILLA_WAFER handling into parsers.c's
+ * client_cookie_adder() to make sure send-vanilla-wafer can be
+ * controlled through tags (and thus regression-tested).
+ *
+ * Revision 1.151 2007/09/29 10:21:16 fabiankeil
+ * - Move get_filter_function() from jcc.c to filters.c
+ * so the filter functions can be static.
+ * - Don't bother filtering body-less responses.
+ *
+ * Revision 1.150 2007/09/28 16:39:29 fabiankeil
+ * Execute content filters through execute_content_filter().
+ *
* Revision 1.149 2007/09/04 15:08:48 fabiankeil
* Initialize req to NULL to make sure it's defined if the
* first read_socket() call fails. Reported by icmp30.
#include "filters.h"
#include "loaders.h"
#include "parsers.h"
-#include "killpopup.h"
#include "miscutil.h"
#include "errlog.h"
#include "jbsockets.h"
static jb_err get_request_destination_elsewhere(struct client_state *csp, struct list *headers);
static jb_err get_server_headers(struct client_state *csp);
static const char *crunch_reason(const struct http_response *rsp);
-static void send_crunch_response(struct client_state *csp, struct http_response *rsp);
-/*
- * static int request_contains_null_bytes(const struct client_state *csp, char *buf, int len);
- */
+static void send_crunch_response(const struct client_state *csp, struct http_response *rsp);
+static char *get_request_line(struct client_state *csp);
+static jb_err receive_client_request(struct client_state *csp);
+static jb_err parse_client_request(struct client_state *csp);
static void build_request_line(struct client_state *csp, const struct forward_spec *fwd, char **request_line);
static jb_err change_request_destination(struct client_state *csp);
static void chat(struct client_state *csp);
static void serve(struct client_state *csp);
-#if defined(unix)
+#if !defined(_WIN32) || defined(_WIN_CONSOLE)
static void usage(const char *myname);
#endif
static void initialize_mutexes(void);
#define sleep(N) DosSleep(((N) * 100))
#endif
-#ifdef FEATURE_PTHREAD
-pthread_mutex_t log_mutex;
-pthread_mutex_t log_init_mutex;
+#ifdef MUTEX_LOCKS_AVAILABLE
+/*
+ * XXX: Does the locking stuff really belong in this file?
+ */
+privoxy_mutex_t log_mutex;
+privoxy_mutex_t log_init_mutex;
+privoxy_mutex_t connection_reuse_mutex;
#if !defined(HAVE_GETHOSTBYADDR_R) || !defined(HAVE_GETHOSTBYNAME_R)
-pthread_mutex_t resolver_mutex;
+privoxy_mutex_t resolver_mutex;
#endif /* !defined(HAVE_GETHOSTBYADDR_R) || !defined(HAVE_GETHOSTBYNAME_R) */
#ifndef HAVE_GMTIME_R
-pthread_mutex_t gmtime_mutex;
+privoxy_mutex_t gmtime_mutex;
#endif /* ndef HAVE_GMTIME_R */
#ifndef HAVE_LOCALTIME_R
-pthread_mutex_t localtime_mutex;
+privoxy_mutex_t localtime_mutex;
#endif /* ndef HAVE_GMTIME_R */
#ifndef HAVE_RANDOM
-pthread_mutex_t rand_mutex;
+privoxy_mutex_t rand_mutex;
#endif /* ndef HAVE_RANDOM */
-#endif /* FEATURE_PTHREAD */
+#endif /* def MUTEX_LOCKS_AVAILABLE */
-#if defined(unix) || defined(__EMX__)
+#if defined(unix)
const char *basedir = NULL;
const char *pidfile = NULL;
-int received_hup_signal = 0;
+static int received_hup_signal = 0;
#endif /* defined unix */
-/* The vanilla wafer. */
-static const char VANILLA_WAFER[] =
- "NOTICE=TO_WHOM_IT_MAY_CONCERN_"
- "Do_not_send_me_any_copyrighted_information_other_than_the_"
- "document_that_I_am_requesting_or_any_of_its_necessary_components._"
- "In_particular_do_not_send_me_any_cookies_that_"
- "are_subject_to_a_claim_of_copyright_by_anybody._"
- "Take_notice_that_I_refuse_to_be_bound_by_any_license_condition_"
- "(copyright_or_otherwise)_applying_to_any_cookie._";
-
/* HTTP snipplets. */
static const char CSUCCEED[] =
- "HTTP/1.0 200 Connection established\n"
+ "HTTP/1.0 200 Connection established\r\n"
"Proxy-Agent: Privoxy/" VERSION "\r\n\r\n";
static const char CHEADER[] =
- "HTTP/1.0 400 Invalid header received from browser\r\n"
+ "HTTP/1.0 400 Invalid header received from client\r\n"
"Proxy-Agent: Privoxy " VERSION "\r\n"
"Content-Type: text/plain\r\n"
"Connection: close\r\n\r\n"
- "Invalid header received from browser.\r\n";
-
-static const char CFORBIDDEN[] =
- "HTTP/1.0 403 Connection not allowable\r\n"
- "Proxy-Agent: Privoxy " VERSION "\r\n"
- "X-Hint: If you read this message interactively, then you know why this happens ,-)\r\n"
- "Connection: close\r\n\r\n";
+ "Invalid header received from client.\r\n";
static const char FTP_RESPONSE[] =
- "HTTP/1.0 400 Invalid request received from browser\r\n"
+ "HTTP/1.0 400 Invalid request received from client\r\n"
"Content-Type: text/plain\r\n"
"Connection: close\r\n\r\n"
"Invalid request. Privoxy doesn't support FTP.\r\n";
static const char GOPHER_RESPONSE[] =
- "HTTP/1.0 400 Invalid request received from browser\r\n"
+ "HTTP/1.0 400 Invalid request received from client\r\n"
"Content-Type: text/plain\r\n"
"Connection: close\r\n\r\n"
"Invalid request. Privoxy doesn't support gopher.\r\n";
/* XXX: should be a template */
static const char MISSING_DESTINATION_RESPONSE[] =
- "HTTP/1.0 400 Bad request received from browser\r\n"
+ "HTTP/1.0 400 Bad request received from client\r\n"
"Proxy-Agent: Privoxy " VERSION "\r\n"
"Content-Type: text/plain\r\n"
"Connection: close\r\n\r\n"
"Content-Type: text/plain\r\n"
"Connection: close\r\n\r\n"
"Empty server or forwarder response.\r\n"
- "The connection was closed without sending any data.\r\n";
+ "The connection has been closed but Privoxy didn't receive any data.\r\n";
+
+/* XXX: should be a template */
+static const char INVALID_SERVER_HEADERS_RESPONSE[] =
+ "HTTP/1.0 502 Server or forwarder response invalid\r\n"
+ "Proxy-Agent: Privoxy " VERSION "\r\n"
+ "Content-Type: text/plain\r\n"
+ "Connection: close\r\n\r\n"
+ "Bad response. The server or forwarder response doesn't look like HTTP.\r\n";
+#if 0
/* XXX: should be a template */
static const char NULL_BYTE_RESPONSE[] =
- "HTTP/1.0 400 Bad request received from browser\r\n"
+ "HTTP/1.0 400 Bad request received from client\r\n"
"Proxy-Agent: Privoxy " VERSION "\r\n"
"Content-Type: text/plain\r\n"
"Connection: close\r\n\r\n"
"Bad request. Null byte(s) before end of request.\r\n";
+#endif
/* XXX: should be a template */
static const char MESSED_UP_REQUEST_RESPONSE[] =
"Connection: close\r\n\r\n"
"Bad request. Messed up with header filters.\r\n";
+static const char TOO_MANY_CONNECTIONS_RESPONSE[] =
+ "HTTP/1.0 503 Too many open connections\r\n"
+ "Proxy-Agent: Privoxy " VERSION "\r\n"
+ "Content-Type: text/plain\r\n"
+ "Connection: close\r\n\r\n"
+ "Maximum number of open connections reached.\r\n";
+
+/* XXX: should be a template */
+static const char CONNECTION_TIMEOUT_RESPONSE[] =
+ "HTTP/1.0 504 Connection timeout\r\n"
+ "Proxy-Agent: Privoxy " VERSION "\r\n"
+ "Content-Type: text/plain\r\n"
+ "Connection: close\r\n\r\n"
+ "The connection timed out.\r\n";
+
/* A function to crunch a response */
typedef struct http_response *(*crunch_func_ptr)(struct client_state *);
};
static int crunch_response_triggered(struct client_state *csp, const struct cruncher crunchers[]);
-static filter_function_ptr get_filter_function(struct client_state *csp);
/* Complete list of cruncher functions */
static const struct cruncher crunchers_all[] = {
};
+/*
+ * XXX: Don't we really mean
+ *
+ * #if defined(unix)
+ *
+ * here?
+ */
#if !defined(_WIN32) && !defined(__OS2__) && !defined(AMIGA)
/*********************************************************************
*
break;
case SIGHUP:
+#if defined(unix)
received_hup_signal = 1;
+#endif
break;
default:
*********************************************************************/
static int client_protocol_is_unsupported(const struct client_state *csp, char *req)
{
- char buf[BUFFER_SIZE];
-
/*
* If it's a FTP or gopher request, we don't support it.
*
*/
if (!strncmpic(req, "GET ftp://", 10) || !strncmpic(req, "GET gopher://", 13))
{
+ const char *response = NULL;
+ const char *protocol = NULL;
+
if (!strncmpic(req, "GET ftp://", 10))
{
- strlcpy(buf, FTP_RESPONSE, sizeof(buf));
- log_error(LOG_LEVEL_ERROR, "%s tried to use Privoxy as FTP proxy: %s",
- csp->ip_addr_str, req);
+ response = FTP_RESPONSE;
+ protocol = "FTP";
}
else
{
- strlcpy(buf, GOPHER_RESPONSE, sizeof(buf));
- log_error(LOG_LEVEL_ERROR, "%s tried to use Privoxy as gopher proxy: %s",
- csp->ip_addr_str, req);
+ response = GOPHER_RESPONSE;
+ protocol = "GOPHER";
}
- log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" 400 0", csp->ip_addr_str, req);
+ log_error(LOG_LEVEL_ERROR,
+ "%s tried to use Privoxy as %s proxy: %s",
+ csp->ip_addr_str, protocol, req);
+ log_error(LOG_LEVEL_CLF,
+ "%s - - [%T] \"%s\" 400 0", csp->ip_addr_str, req);
freez(req);
- write_socket(csp->cfd, buf, strlen(buf));
+ write_socket(csp->cfd, response, strlen(response));
return TRUE;
}
int continue_hack_in_da_house = 0;
char * header;
- while (((header = get_header(csp)) != NULL) || continue_hack_in_da_house)
+ while (((header = get_header(csp->iob)) != NULL) || continue_hack_in_da_house)
{
if (header == NULL)
{
{
/*
* It's a bodyless continue response, don't
- * stop header parsing after reaching it's end.
+ * stop header parsing after reaching its end.
*
* As a result Privoxy will concatenate the
* next response's head and parse and deliver
return JB_ERR_PARSE;
}
- /* Enlist header */
if (JB_ERR_MEMORY == enlist(csp->headers, header))
{
/*
* Returns : Nothing.
*
*********************************************************************/
-static void send_crunch_response(struct client_state *csp, struct http_response *rsp)
+static void send_crunch_response(const struct client_state *csp, struct http_response *rsp)
{
const struct http_request *http = csp->http;
char status_code[4];
}
/* Log that the request was crunched and why. */
- log_error(LOG_LEVEL_GPC, "%s%s crunch! (%s)",
- http->hostport, http->path, crunch_reason(rsp));
- log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" %s %d",
+ log_error(LOG_LEVEL_CRUNCH, "%s: %s", crunch_reason(rsp), http->url);
+ log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" %s %u",
csp->ip_addr_str, http->ocmd, status_code, rsp->content_length);
/* Clean up and return */
} while (tmp_len < len);
log_error(LOG_LEVEL_ERROR, "%s\'s request contains at least one NULL byte "
- "(length=%d, strlen=%d).", csp->ip_addr_str, len, c_len);
+ "(length=%d, strlen=%u).", csp->ip_addr_str, len, c_len);
log_error(LOG_LEVEL_HEADER,
"Offending request data with NULL bytes turned into \'°\' characters: %s", buf);
log_error(LOG_LEVEL_INFO, "Rewrite detected: %s", csp->headers->first->str);
free_http_request(http);
- err = parse_http_request(csp->headers->first->str, http, csp);
+ err = parse_http_request(csp->headers->first->str, http);
if (JB_ERR_OK != err)
{
log_error(LOG_LEVEL_ERROR, "Couldn't parse rewritten request: %s.",
jb_err_to_string(err));
}
- http->ocmd = strdup(http->cmd); /* XXX: ocmd is a misleading name */
- if (http->ocmd == NULL)
+ else
{
- log_error(LOG_LEVEL_FATAL, "Out of memory copying rewritten HTTP request line");
+ /* XXX: ocmd is a misleading name */
+ http->ocmd = strdup(http->cmd);
+ if (http->ocmd == NULL)
+ {
+ log_error(LOG_LEVEL_FATAL,
+ "Out of memory copying rewritten HTTP request line");
+ }
}
return err;
}
+#ifdef FEATURE_CONNECTION_KEEP_ALIVE
/*********************************************************************
*
- * Function : get_filter_function
+ * Function : server_response_is_complete
*
- * Description : Decides which content filter function has
- * to be applied (if any).
- *
- * XXX: Doesn't handle filter_popups()
- * because of the different prototype. Probably
- * we should ditch filter_popups() anyway, it's
- * even less reliable than popup blocking based
- * on pcrs filters.
+ * Description : Determines whether we should stop reading
+ * from the server socket.
*
* Parameters :
* 1 : csp = Current client state (buffers, headers, etc...)
+ * 2 : content_length = Length of content received so far.
*
- * Returns : The content filter function to run, or
- * NULL if no content filter is active
+ * Returns : TRUE if the response is complete,
+ * FALSE otherwise.
*
*********************************************************************/
-static filter_function_ptr get_filter_function(struct client_state *csp)
+static int server_response_is_complete(struct client_state *csp,
+ unsigned long long content_length)
{
- filter_function_ptr filter_function = NULL;
+ int content_length_known = !!(csp->flags & CSP_FLAG_CONTENT_LENGTH_SET);
- /*
- * Are we enabling text mode by force?
- */
- if (csp->action->flags & ACTION_FORCE_TEXT_MODE)
+ if (!strcmpic(csp->http->gpc, "HEAD"))
{
/*
- * Do we really have to?
+ * "HEAD" implies no body, we are thus expecting
+ * no content. XXX: incomplete "list" of methods?
*/
- if (csp->content_type & CT_TEXT)
- {
- log_error(LOG_LEVEL_HEADER, "Text mode is already enabled.");
- }
- else
- {
- csp->content_type |= CT_TEXT;
- log_error(LOG_LEVEL_HEADER, "Text mode enabled by force. Take cover!");
- }
+ csp->expected_content_length = 0;
+ content_length_known = TRUE;
}
- if (!(csp->content_type & CT_DECLARED))
+ if (csp->http->status == 304)
{
/*
- * The server didn't bother to declare a MIME-Type.
- * Assume it's text that can be filtered.
- *
- * This also regulary happens with 304 responses,
- * therefore logging anything here would cause
- * too much noise.
+ * Expect no body. XXX: incomplete "list" of status codes?
*/
- csp->content_type |= CT_TEXT;
+ csp->expected_content_length = 0;
+ content_length_known = TRUE;
}
+ return (content_length_known && ((0 == csp->expected_content_length)
+ || (csp->expected_content_length <= content_length)));
+}
- /*
- * Choose the applying filter function based on
- * the content type and action settings.
- */
- if ((csp->content_type & CT_TEXT) &&
- (csp->rlist != NULL) &&
- (!list_is_empty(csp->action->multi[ACTION_MULTI_FILTER])))
+
+/*********************************************************************
+ *
+ * Function : wait_for_alive_connections
+ *
+ * Description : Waits for alive connections to timeout.
+ *
+ * Parameters : N/A
+ *
+ * Returns : N/A
+ *
+ *********************************************************************/
+static void wait_for_alive_connections()
+{
+ int connections_alive = close_unusable_connections();
+
+ while (0 < connections_alive)
+ {
+ log_error(LOG_LEVEL_CONNECT,
+ "Waiting for %d connections to timeout.",
+ connections_alive);
+ sleep(60);
+ connections_alive = close_unusable_connections();
+ }
+
+ log_error(LOG_LEVEL_CONNECT, "No connections to wait for left.");
+
+}
+
+
+/*********************************************************************
+ *
+ * Function : save_connection_destination
+ *
+ * Description : Remembers a connection for reuse later on.
+ *
+ * Parameters :
+ * 1 : sfd = Open socket to remember.
+ * 2 : http = The destination for the connection.
+ * 3 : fwd = The forwarder settings used.
+ * 3 : server_connection = storage.
+ *
+ * Returns : void
+ *
+ *********************************************************************/
+void save_connection_destination(jb_socket sfd,
+ const struct http_request *http,
+ const struct forward_spec *fwd,
+ struct reusable_connection *server_connection)
+{
+ assert(sfd != JB_INVALID_SOCKET);
+ assert(NULL != http->host);
+ server_connection->host = strdup(http->host);
+ if (NULL == server_connection->host)
{
- filter_function = pcrs_filter_response;
+ log_error(LOG_LEVEL_FATAL, "Out of memory saving socket.");
}
- else if ((csp->content_type & CT_GIF) &&
- (csp->action->flags & ACTION_DEANIMATE))
+ server_connection->port = http->port;
+
+ assert(NULL != fwd);
+ assert(server_connection->gateway_host == NULL);
+ assert(server_connection->gateway_port == 0);
+ assert(server_connection->forwarder_type == 0);
+ assert(server_connection->forward_host == NULL);
+ assert(server_connection->forward_port == 0);
+
+ server_connection->forwarder_type = fwd->type;
+ if (NULL != fwd->gateway_host)
{
- filter_function = gif_deanimate_response;
+ server_connection->gateway_host = strdup(fwd->gateway_host);
+ if (NULL == server_connection->gateway_host)
+ {
+ log_error(LOG_LEVEL_FATAL, "Out of memory saving gateway_host.");
+ }
}
- else if ((csp->content_type & CT_JPEG) &&
- (csp->action->flags & ACTION_JPEG_INSPECT))
+ else
{
- filter_function = jpeg_inspect_response;
+ server_connection->gateway_host = NULL;
}
+ server_connection->gateway_port = fwd->gateway_port;
- return filter_function;
+ if (NULL != fwd->forward_host)
+ {
+ server_connection->forward_host = strdup(fwd->forward_host);
+ if (NULL == server_connection->forward_host)
+ {
+ log_error(LOG_LEVEL_FATAL, "Out of memory saving forward_host.");
+ }
+ }
+ else
+ {
+ server_connection->forward_host = NULL;
+ }
+ server_connection->forward_port = fwd->forward_port;
}
+#endif /* FEATURE_CONNECTION_KEEP_ALIVE */
+
/*********************************************************************
*
- * Function : chat
+ * Function : mark_server_socket_tainted
*
- * Description : Once a connection to the client has been accepted,
- * this function is called (via serve()) to handle the
- * main business of the communication. When this
- * function returns, the caller must close the client
- * socket handle.
+ * Description : Makes sure we don't reuse a server socket
+ * (if we didn't read everything the server sent
+ * us reusing the socket would lead to garbage).
*
- * FIXME: chat is nearly thousand lines long.
- * Ridiculous.
+ * Parameters :
+ * 1 : csp = Current client state (buffers, headers, etc...)
+ *
+ * Returns : void.
+ *
+ *********************************************************************/
+static void mark_server_socket_tainted(struct client_state *csp)
+{
+ if ((csp->flags & CSP_FLAG_SERVER_CONNECTION_KEEP_ALIVE))
+ {
+ log_error(LOG_LEVEL_CONNECT, "Unsetting keep-alive flag.");
+ csp->flags &= ~CSP_FLAG_SERVER_CONNECTION_KEEP_ALIVE;
+ }
+}
+
+/*********************************************************************
+ *
+ * Function : get_request_line
+ *
+ * Description : Read the client request line.
*
* Parameters :
* 1 : csp = Current client state (buffers, headers, etc...)
*
- * Returns : Nothing.
+ * Returns : Pointer to request line or NULL in case of errors.
*
*********************************************************************/
-static void chat(struct client_state *csp)
+static char *get_request_line(struct client_state *csp)
{
char buf[BUFFER_SIZE];
- char *hdr;
- char *p;
- char *req = NULL;
- fd_set rfds;
- int n;
- jb_socket maxfd;
- int server_body;
- int ms_iis5_hack = 0;
- size_t byte_count = 0;
- int forwarded_connect_retries = 0;
- int max_forwarded_connect_retries = csp->config->forwarded_connect_retries;
- const struct forward_spec * fwd;
- struct http_request *http;
- int len; /* for buffer sizes (and negative error codes) */
- jb_err err;
-#ifdef FEATURE_KILL_POPUPS
- int block_popups_now = 0; /* bool, 1==currently blocking popups */
-#endif /* def FEATURE_KILL_POPUPS */
-
- /* Function that does the content filtering for the current request */
- filter_function_ptr content_filter = NULL;
-
- /* Skeleton for HTTP response, if we should intercept the request */
- struct http_response *rsp;
-
- /* Temporary copy of the client's headers before they get enlisted in csp->headers */
- struct list header_list;
- struct list *headers = &header_list;
-
- http = csp->http;
+ char *request_line = NULL;
+ int len;
memset(buf, 0, sizeof(buf));
- /*
- * Read the client's request. Note that since we're not using select() we
- * could get blocked here if a client connected, then didn't say anything!
- */
-
do
{
+ if (!data_is_available(csp->cfd, csp->config->socket_timeout))
+ {
+ log_error(LOG_LEVEL_ERROR,
+ "Stopped waiting for the request line.");
+ write_socket(csp->cfd, CONNECTION_TIMEOUT_RESPONSE,
+ strlen(CONNECTION_TIMEOUT_RESPONSE));
+ return NULL;
+ }
+
len = read_socket(csp->cfd, buf, sizeof(buf) - 1);
- if (len <= 0) break; /* error! */
+ if (len <= 0) return NULL;
/*
* If there is no memory left for buffering the
*/
if (add_to_iob(csp, buf, len))
{
- return;
+ return NULL;
}
- req = get_header(csp);
+ request_line = get_header(csp->iob);
- } while ((NULL != req) && ('\0' == *req));
+ } while ((NULL != request_line) && ('\0' == *request_line));
- if (NULL != req)
- {
- /* Request received. Validate and parse it. */
+ return request_line;
-#if 0
- /*
- * XXX: Temporary disabled to prevent problems
- * with POST requests whose bodies are allowed to
- * contain NULL bytes. BR#1730105.
- *
- * The main purpose of this check is to properly
- * log stuff like BitTorrent traffic and other junk
- * that hits public proxies. It's not required for
- * Privoxy to functions as those requests are discarded
- * later on anyway.
- *
- * It probably should be rewritten to only check
- * the head of the request. Another option would
- * be to let all POST requests pass, although that
- * may not be good enough.
- */
- if (request_contains_null_bytes(csp, buf, len))
- {
- /* NULL bytes found and dealt with, just hang up. */
- return;
- }
-#endif
+}
- /* Does the request line look invalid? */
- if (client_protocol_is_unsupported(csp, req))
- {
- /*
- * Yes. The request has already been
- * answered with a error response, the buffers
- * were freed and we're done with chatting.
- */
- return;
- }
-#ifdef FEATURE_FORCE_LOAD
- /*
- * If this request contains the FORCE_PREFIX and blocks
- * aren't enforced, get rid of it and set the force flag.
- */
- if (strstr(req, FORCE_PREFIX))
+/*********************************************************************
+ *
+ * Function : receive_client_request
+ *
+ * Description : Read the client's request (more precisely the
+ * client headers) and answer it if necessary.
+ *
+ * Note that since we're not using select() we could get
+ * blocked here if a client connected, then didn't say
+ * anything!
+ *
+ * Parameters :
+ * 1 : csp = Current client state (buffers, headers, etc...)
+ *
+ * Returns : JB_ERR_OK, JB_ERR_PARSE or JB_ERR_MEMORY
+ *
+ *********************************************************************/
+static jb_err receive_client_request(struct client_state *csp)
+{
+ char buf[BUFFER_SIZE];
+ char *p;
+ char *req = NULL;
+ struct http_request *http;
+ int len;
+ jb_err err;
+
+ /* Temporary copy of the client's headers before they get enlisted in csp->headers */
+ struct list header_list;
+ struct list *headers = &header_list;
+
+ http = csp->http;
+
+ memset(buf, 0, sizeof(buf));
+
+ req = get_request_line(csp);
+ if (req == NULL)
+ {
+ return JB_ERR_PARSE;
+ }
+ assert(*req != '\0');
+
+ if (client_protocol_is_unsupported(csp, req))
+ {
+ return JB_ERR_PARSE;
+ }
+
+#ifdef FEATURE_FORCE_LOAD
+ /*
+ * If this request contains the FORCE_PREFIX and blocks
+ * aren't enforced, get rid of it and set the force flag.
+ */
+ if (strstr(req, FORCE_PREFIX))
+ {
+ if (csp->config->feature_flags & RUNTIME_FEATURE_ENFORCE_BLOCKS)
{
- if (csp->config->feature_flags & RUNTIME_FEATURE_ENFORCE_BLOCKS)
- {
- log_error(LOG_LEVEL_FORCE,
- "Ignored force prefix in request: \"%s\".", req);
- }
- else
- {
- strclean(req, FORCE_PREFIX);
- log_error(LOG_LEVEL_FORCE, "Enforcing request: \"%s\".", req);
- csp->flags |= CSP_FLAG_FORCED;
- }
+ log_error(LOG_LEVEL_FORCE,
+ "Ignored force prefix in request: \"%s\".", req);
}
-
-#endif /* def FEATURE_FORCE_LOAD */
- err = parse_http_request(req, http, csp);
- if (JB_ERR_OK != err)
+ else
{
- log_error(LOG_LEVEL_ERROR, "Couldn't parse request: %s.", jb_err_to_string(err));
+ strclean(req, FORCE_PREFIX);
+ log_error(LOG_LEVEL_FORCE, "Enforcing request: \"%s\".", req);
+ csp->flags |= CSP_FLAG_FORCED;
}
-
- freez(req);
}
+#endif /* def FEATURE_FORCE_LOAD */
- if (http->cmd == NULL)
+ err = parse_http_request(req, http);
+ freez(req);
+ if (JB_ERR_OK != err)
{
write_socket(csp->cfd, CHEADER, strlen(CHEADER));
/* XXX: Use correct size */
log_error(LOG_LEVEL_CLF, "%s - - [%T] \"Invalid request\" 400 0", csp->ip_addr_str);
- log_error(LOG_LEVEL_ERROR, "Invalid header received from %s.", csp->ip_addr_str);
+ log_error(LOG_LEVEL_ERROR,
+ "Couldn't parse request line received from %s: %s",
+ csp->ip_addr_str, jb_err_to_string(err));
free_http_request(http);
- return;
+ return JB_ERR_PARSE;
}
/* grab the rest of the client's headers */
init_list(headers);
for (;;)
{
- if ( ( ( p = get_header(csp) ) != NULL) && ( *p == '\0' ) )
+ p = get_header(csp->iob);
+
+ if (p == NULL)
+ {
+ /* There are no additional headers to read. */
+ break;
+ }
+
+ if (*p == '\0')
{
+ /*
+ * We didn't receive a complete header
+ * line yet, get the rest of it.
+ */
+ if (!data_is_available(csp->cfd, csp->config->socket_timeout))
+ {
+ log_error(LOG_LEVEL_ERROR,
+ "Stopped grabbing the client headers.");
+ return JB_ERR_PARSE;
+ }
+
len = read_socket(csp->cfd, buf, sizeof(buf) - 1);
if (len <= 0)
{
log_error(LOG_LEVEL_ERROR, "read from client failed: %E");
- return;
+ destroy_list(headers);
+ return JB_ERR_PARSE;
}
- /*
- * If there is no memory left for buffering the
- * request, there is nothing we can do but hang up
- */
if (add_to_iob(csp, buf, len))
{
- return;
+ /*
+ * If there is no memory left for buffering the
+ * request, there is nothing we can do but hang up
+ */
+ destroy_list(headers);
+ return JB_ERR_MEMORY;
}
- continue;
}
-
- if (p == NULL) break;
-
- enlist(headers, p);
- freez(p);
-
+ else
+ {
+ /*
+ * We were able to read a complete
+ * header and can finaly enlist it.
+ */
+ enlist(headers, p);
+ freez(p);
+ }
}
if (http->host == NULL)
* An error response has already been send
* and we're done here.
*/
- return;
+ return JB_ERR_PARSE;
}
}
else
#endif /* ndef FEATURE_TOGGLE */
{
- url_actions(http, csp);
+ get_url_actions(csp, http);
}
/*
* Save a copy of the original request for logging
*/
http->ocmd = strdup(http->cmd);
-
if (http->ocmd == NULL)
{
- log_error(LOG_LEVEL_FATAL, "Out of memory copying HTTP request line");
+ log_error(LOG_LEVEL_FATAL,
+ "Out of memory copying HTTP request line");
}
-
enlist(csp->headers, http->cmd);
/* Append the previously read headers */
list_append_list_unique(csp->headers, headers);
destroy_list(headers);
- /*
- * If the user has not supplied any wafers, and the user has not
- * told us to suppress the vanilla wafer, then send the vanilla wafer.
- */
- if (list_is_empty(csp->action->multi[ACTION_MULTI_WAFER])
- && ((csp->action->flags & ACTION_VANILLA_WAFER) != 0))
- {
- enlist(csp->action->multi[ACTION_MULTI_WAFER], VANILLA_WAFER);
- }
+ return JB_ERR_OK;
+
+}
+
+
+/*********************************************************************
+ *
+ * Function : parse_client_request
+ *
+ * Description : Parses the client's request and decides what to do
+ * with it.
+ *
+ * Note that since we're not using select() we could get
+ * blocked here if a client connected, then didn't say
+ * anything!
+ *
+ * Parameters :
+ * 1 : csp = Current client state (buffers, headers, etc...)
+ *
+ * Returns : JB_ERR_OK or JB_ERR_PARSE
+ *
+ *********************************************************************/
+static jb_err parse_client_request(struct client_state *csp)
+{
+ struct http_request *http = csp->http;
+ jb_err err;
- err = sed(client_patterns, add_client_headers, csp);
+ err = sed(csp, FILTER_CLIENT_HEADERS);
if (JB_ERR_OK != err)
{
+ /* XXX: Should be handled in sed(). */
assert(err == JB_ERR_PARSE);
- log_error(LOG_LEVEL_FATAL, "Failed to parse client headers");
+ log_error(LOG_LEVEL_FATAL, "Failed to parse client headers.");
}
csp->flags |= CSP_FLAG_CLIENT_HEADER_PARSING_DONE;
*/
write_socket(csp->cfd, MESSED_UP_REQUEST_RESPONSE, strlen(MESSED_UP_REQUEST_RESPONSE));
/* XXX: Use correct size */
- log_error(LOG_LEVEL_CLF, "%s - - [%T] \"Invalid request generated\" 500 0", csp->ip_addr_str);
- log_error(LOG_LEVEL_ERROR, "Invalid request line after applying header filters.");
-
+ log_error(LOG_LEVEL_CLF,
+ "%s - - [%T] \"Invalid request generated\" 500 0", csp->ip_addr_str);
+ log_error(LOG_LEVEL_ERROR,
+ "Invalid request line after applying header filters.");
free_http_request(http);
+
+ return JB_ERR_PARSE;
+ }
+
+ return JB_ERR_OK;
+
+}
+
+
+/*********************************************************************
+ *
+ * Function : chat
+ *
+ * Description : Once a connection to the client has been accepted,
+ * this function is called (via serve()) to handle the
+ * main business of the communication. When this
+ * function returns, the caller must close the client
+ * socket handle.
+ *
+ * FIXME: chat is nearly thousand lines long.
+ * Ridiculous.
+ *
+ * Parameters :
+ * 1 : csp = Current client state (buffers, headers, etc...)
+ *
+ * Returns : Nothing.
+ *
+ *********************************************************************/
+static void chat(struct client_state *csp)
+{
+ char buf[BUFFER_SIZE];
+ char *hdr;
+ char *p;
+ fd_set rfds;
+ int n;
+ jb_socket maxfd;
+ int server_body;
+ int ms_iis5_hack = 0;
+ unsigned long long byte_count = 0;
+ int forwarded_connect_retries = 0;
+ int max_forwarded_connect_retries = csp->config->forwarded_connect_retries;
+ const struct forward_spec *fwd;
+ struct http_request *http;
+ long len = 0; /* for buffer sizes (and negative error codes) */
+
+ /* Function that does the content filtering for the current request */
+ filter_function_ptr content_filter = NULL;
+
+ /* Skeleton for HTTP response, if we should intercept the request */
+ struct http_response *rsp;
+ struct timeval timeout;
+
+ memset(buf, 0, sizeof(buf));
+
+ http = csp->http;
+
+ if (receive_client_request(csp) != JB_ERR_OK)
+ {
+ return;
+ }
+ if (parse_client_request(csp) != JB_ERR_OK)
+ {
return;
}
/* decide how to route the HTTP request */
- if (NULL == (fwd = forward_url(http, csp)))
+ fwd = forward_url(csp, http);
+ if (NULL == fwd)
{
log_error(LOG_LEVEL_FATAL, "gateway spec is NULL!?!? This can't happen!");
/* Never get here - LOG_LEVEL_FATAL causes program exit */
+ return;
}
/*
*
*/
- /*
- * Check if a CONNECT request is allowable:
- * In the absence of a +limit-connect action, allow only port 443.
- * If there is an action, allow whatever matches the specificaton.
- */
- if(http->ssl)
+ if (http->ssl && connect_port_is_forbidden(csp))
{
- if( ( !(csp->action->flags & ACTION_LIMIT_CONNECT) && csp->http->port != 443)
- || (csp->action->flags & ACTION_LIMIT_CONNECT
- && !match_portlist(csp->action->string[ACTION_STRING_LIMIT_CONNECT], csp->http->port)) )
- {
- if (csp->action->flags & ACTION_TREAT_FORBIDDEN_CONNECTS_LIKE_BLOCKS)
- {
- /*
- * The response may confuse some clients,
- * but makes unblocking easier.
- *
- * XXX: It seems to work with all major browsers,
- * so we should consider returning a body by default someday ...
- */
- log_error(LOG_LEVEL_INFO, "Request from %s marked for blocking. "
- "limit-connect{%s} doesn't allow CONNECT requests to port %d.",
- csp->ip_addr_str, csp->action->string[ACTION_STRING_LIMIT_CONNECT],
- csp->http->port);
- csp->action->flags |= ACTION_BLOCK;
- http->ssl = 0;
- }
- else
- {
- write_socket(csp->cfd, CFORBIDDEN, strlen(CFORBIDDEN));
- log_error(LOG_LEVEL_INFO, "Request from %s denied. "
- "limit-connect{%s} doesn't allow CONNECT requests to port %d.",
- csp->ip_addr_str, csp->action->string[ACTION_STRING_LIMIT_CONNECT],
- csp->http->port);
- assert(NULL != csp->http->ocmd);
- log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" 403 0", csp->ip_addr_str, csp->http->ocmd);
-
- list_remove_all(csp->headers);
- /*
- * XXX: For consistency we might want to log a crunch message here.
- */
- return;
- }
- }
+ const char *acceptable_connect_ports =
+ csp->action->string[ACTION_STRING_LIMIT_CONNECT];
+ assert(NULL != acceptable_connect_ports);
+ log_error(LOG_LEVEL_INFO, "Request from %s marked for blocking. "
+ "limit-connect{%s} doesn't allow CONNECT requests to port %d.",
+ csp->ip_addr_str, acceptable_connect_ports, csp->http->port);
+ csp->action->flags |= ACTION_BLOCK;
+ http->ssl = 0;
}
if (http->ssl == 0)
build_request_line(csp, fwd, &csp->headers->first->str);
}
- hdr = list_to_text(csp->headers);
- if (hdr == NULL)
- {
- /* FIXME Should handle error properly */
- log_error(LOG_LEVEL_FATAL, "Out of memory parsing client header");
- }
-
/*
* We have a request. Check if one of the crunchers wants it.
*/
* Yes. The client got the crunch response
* and we are done here after cleaning up.
*/
- freez(hdr);
+ /* XXX: why list_remove_all()? */
list_remove_all(csp->headers);
return;
}
- /*
- * The headers can't be removed earlier because
- * they were still needed for the referrer check
- * in case of CGI crunches.
- *
- * XXX: Would it be worth to move the referrer check
- * into client_referrer() and set a flag if it's trusted?
- */
- list_remove_all(csp->headers);
-
log_error(LOG_LEVEL_GPC, "%s%s", http->hostport, http->path);
if (fwd->forward_host)
{
- log_error(LOG_LEVEL_CONNECT, "via %s:%d to: %s",
- fwd->forward_host, fwd->forward_port, http->hostport);
+ log_error(LOG_LEVEL_CONNECT, "via [%s]:%d to: %s",
+ fwd->forward_host, fwd->forward_port, http->hostport);
}
else
{
/* here we connect to the server, gateway, or the forwarder */
- while ( (csp->sfd = forwarded_connect(fwd, http, csp))
- && (errno == EINVAL) && (forwarded_connect_retries++ < max_forwarded_connect_retries))
+#ifdef FEATURE_CONNECTION_KEEP_ALIVE
+ if ((csp->sfd != JB_INVALID_SOCKET)
+ && socket_is_still_usable(csp->sfd)
+ && connection_destination_matches(&csp->server_connection, http, fwd))
{
- log_error(LOG_LEVEL_ERROR, "failed request #%u to connect to %s. Trying again.",
- forwarded_connect_retries, http->hostport);
+ log_error(LOG_LEVEL_CONNECT,
+ "Reusing server socket %u. Opened for %s.",
+ csp->sfd, csp->server_connection.host);
}
-
- if (csp->sfd == JB_INVALID_SOCKET)
+ else
{
- if (fwd->type != SOCKS_NONE)
+ if (csp->sfd != JB_INVALID_SOCKET)
{
- /* Socks error. */
- rsp = error_response(csp, "forwarding-failed", errno);
+ log_error(LOG_LEVEL_CONNECT,
+ "Closing server socket %u. Opened for %s.",
+ csp->sfd, csp->server_connection.host);
+ close_socket(csp->sfd);
+ mark_connection_closed(&csp->server_connection);
}
- else if (errno == EINVAL)
+#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
+
+ while ((csp->sfd = forwarded_connect(fwd, http, csp))
+ && (errno == EINVAL)
+ && (forwarded_connect_retries++ < max_forwarded_connect_retries))
{
- rsp = error_response(csp, "no-such-domain", errno);
+ log_error(LOG_LEVEL_ERROR,
+ "failed request #%u to connect to %s. Trying again.",
+ forwarded_connect_retries, http->hostport);
}
- else
+
+ if (csp->sfd == JB_INVALID_SOCKET)
{
- rsp = error_response(csp, "connect-failed", errno);
- log_error(LOG_LEVEL_CONNECT, "connect to: %s failed: %E",
- http->hostport);
- }
+ if (fwd->type != SOCKS_NONE)
+ {
+ /* Socks error. */
+ rsp = error_response(csp, "forwarding-failed", errno);
+ }
+ else if (errno == EINVAL)
+ {
+ rsp = error_response(csp, "no-such-domain", errno);
+ }
+ else
+ {
+ rsp = error_response(csp, "connect-failed", errno);
+ log_error(LOG_LEVEL_CONNECT, "connect to: %s failed: %E",
+ http->hostport);
+ }
+ /* Write the answer to the client */
+ if (rsp != NULL)
+ {
+ send_crunch_response(csp, rsp);
+ }
- /* Write the answer to the client */
- if (rsp != NULL)
- {
- send_crunch_response(csp, rsp);
+ return;
}
+#ifdef FEATURE_CONNECTION_KEEP_ALIVE
+ save_connection_destination(csp->sfd, http, fwd, &csp->server_connection);
+ }
+#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
- freez(hdr);
- return;
+ hdr = list_to_text(csp->headers);
+ if (hdr == NULL)
+ {
+ /* FIXME Should handle error properly */
+ log_error(LOG_LEVEL_FATAL, "Out of memory parsing client header");
}
+ list_remove_all(csp->headers);
if (fwd->forward_host || (http->ssl == 0))
{
- /* write the client's (modified) header to the server
+ /*
+ * Write the client's (modified) header to the server
* (along with anything else that may be in the buffer)
*/
-
if (write_socket(csp->sfd, hdr, strlen(hdr))
- || (flush_socket(csp->sfd, csp) < 0))
+ || (flush_socket(csp->sfd, csp->iob) < 0))
{
- log_error(LOG_LEVEL_CONNECT, "write header to: %s failed: %E",
- http->hostport);
+ log_error(LOG_LEVEL_CONNECT,
+ "write header to: %s failed: %E", http->hostport);
rsp = error_response(csp, "connect-failed", errno);
-
- if(rsp)
+ if (rsp)
{
send_crunch_response(csp, rsp);
}
/* we're finished with the client's header */
freez(hdr);
- maxfd = ( csp->cfd > csp->sfd ) ? csp->cfd : csp->sfd;
+ maxfd = (csp->cfd > csp->sfd) ? csp->cfd : csp->sfd;
/* pass data between the client and server
* until one or the other shuts down the connection.
FD_SET(csp->cfd, &rfds);
FD_SET(csp->sfd, &rfds);
- n = select((int)maxfd+1, &rfds, NULL, NULL, NULL);
+#ifdef FEATURE_CONNECTION_KEEP_ALIVE
+ if ((csp->flags & CSP_FLAG_CHUNKED)
+ && !(csp->flags & CSP_FLAG_CONTENT_LENGTH_SET)
+ && ((csp->iob->eod - csp->iob->cur) >= 5)
+ && !memcmp(csp->iob->eod-5, "0\r\n\r\n", 5))
+ {
+ log_error(LOG_LEVEL_CONNECT,
+ "Looks like we read the last chunk together with "
+ "the server headers. We better stop reading.");
+ byte_count = (unsigned long long)(csp->iob->eod - csp->iob->cur);
+ csp->expected_content_length = byte_count;
+ csp->flags |= CSP_FLAG_CONTENT_LENGTH_SET;
+ }
+ if (server_body && server_response_is_complete(csp, byte_count))
+ {
+ log_error(LOG_LEVEL_CONNECT,
+ "Done reading from server. Expected content length: %llu. "
+ "Actual content length: %llu. Most recently received: %d.",
+ csp->expected_content_length, byte_count, len);
+ len = 0;
+ /*
+ * XXX: should not jump around,
+ * chat() is complicated enough already.
+ */
+ goto reading_done;
+ }
+#endif /* FEATURE_CONNECTION_KEEP_ALIVE */
- if (n < 0)
+ timeout.tv_sec = csp->config->socket_timeout;
+ timeout.tv_usec = 0;
+ n = select((int)maxfd+1, &rfds, NULL, NULL, &timeout);
+
+ if (n == 0)
+ {
+ log_error(LOG_LEVEL_ERROR,
+ "Didn't receive data in time: %s", http->url);
+ if ((byte_count == 0) && (http->ssl == 0))
+ {
+ write_socket(csp->cfd, CONNECTION_TIMEOUT_RESPONSE,
+ strlen(CONNECTION_TIMEOUT_RESPONSE));
+ }
+ mark_server_socket_tainted(csp);
+ return;
+ }
+ else if (n < 0)
{
log_error(LOG_LEVEL_ERROR, "select() failed!: %E");
+ mark_server_socket_tainted(csp);
return;
}
- /* this is the body of the browser's request
- * just read it and write it.
+ /*
+ * This is the body of the browser's request,
+ * just read and write it.
+ *
+ * XXX: Make sure the client doesn't use pipelining
+ * behind Privoxy's back.
*/
-
if (FD_ISSET(csp->cfd, &rfds))
{
len = read_socket(csp->cfd, buf, sizeof(buf) - 1);
if (len <= 0)
{
+ /* XXX: not sure if this is necessary. */
+ mark_server_socket_tainted(csp);
break; /* "game over, man" */
}
if (write_socket(csp->sfd, buf, (size_t)len))
{
log_error(LOG_LEVEL_ERROR, "write to: %s failed: %E", http->host);
+ mark_server_socket_tainted(csp);
return;
}
continue;
}
/*
- * The server wants to talk. It could be the header or the body.
+ * The server wants to talk. It could be the header or the body.
* If `hdr' is null, then it's the header otherwise it's the body.
* FIXME: Does `hdr' really mean `host'? No.
*/
-
-
if (FD_ISSET(csp->sfd, &rfds))
{
- fflush( 0 );
+ fflush(0);
len = read_socket(csp->sfd, buf, sizeof(buf) - 1);
if (len < 0)
*/
log_error(LOG_LEVEL_ERROR, "Already forwarded the original headers. "
"Unable to tell the client about the problem.");
+ mark_server_socket_tainted(csp);
return;
}
+ /*
+ * XXX: Consider handling the cases above the same.
+ */
+ mark_server_socket_tainted(csp);
+ len = 0;
+ }
- rsp = error_response(csp, "connect-failed", errno);
-
- if (rsp)
+#ifdef FEATURE_CONNECTION_KEEP_ALIVE
+ if (csp->flags & CSP_FLAG_CHUNKED)
+ {
+ if ((len >= 5) && !memcmp(buf+len-5, "0\r\n\r\n", 5))
{
- send_crunch_response(csp, rsp);
+ /* XXX: this is a temporary hack */
+ log_error(LOG_LEVEL_CONNECT,
+ "Looks like we reached the end of the last chunk. "
+ "We better stop reading.");
+ csp->expected_content_length = byte_count + (unsigned long long)len;
+ csp->flags |= CSP_FLAG_CONTENT_LENGTH_SET;
}
-
- return;
}
+ reading_done:
+#endif /* FEATURE_CONNECTION_KEEP_ALIVE */
- /* Add a trailing zero. This lets filter_popups
- * use string operations.
+ /*
+ * Add a trailing zero to let be able to use string operations.
+ * XXX: do we still need this with filter_popups gone?
*/
buf[len] = '\0';
-#ifdef FEATURE_KILL_POPUPS
- /* Filter the popups on this read. */
- if (block_popups_now)
- {
- filter_popups(buf, csp);
- }
-#endif /* def FEATURE_KILL_POPUPS */
-
- /* Normally, this would indicate that we've read
+ /*
+ * Normally, this would indicate that we've read
* as much as the server has sent us and we can
* close the client connection. However, Microsoft
* in its wisdom has released IIS/5 with a bug that
csp->content_length = (size_t)(csp->iob->eod - csp->iob->cur);
}
- if (JB_ERR_OK != sed(server_patterns_light, NULL, csp))
+ if (JB_ERR_OK != update_server_headers(csp))
{
- log_error(LOG_LEVEL_FATAL, "Failed to parse server headers.");
+ log_error(LOG_LEVEL_FATAL,
+ "Failed to update server headers. after filtering.");
}
hdr = list_to_text(csp->headers);
log_error(LOG_LEVEL_FATAL, "Out of memory parsing server header");
}
- /*
- * Shouldn't happen because this was the second sed run
- * and tags are only created for the first one.
- */
- assert(!crunch_response_triggered(csp, crunchers_all));
-
if (write_socket(csp->cfd, hdr, strlen(hdr))
- || write_socket(csp->cfd, p != NULL ? p : csp->iob->cur, csp->content_length))
+ || write_socket(csp->cfd,
+ ((p != NULL) ? p : csp->iob->cur), (size_t)csp->content_length))
{
log_error(LOG_LEVEL_ERROR, "write modified content to client failed: %E");
freez(hdr);
freez(p);
+ mark_server_socket_tainted(csp);
return;
}
* of the server document, just write it to the client,
* unless we need to buffer the body for later content-filtering
*/
-
if (server_body || http->ssl)
{
if (content_filter)
if (add_to_iob(csp, buf, len))
{
size_t hdrlen;
- int flushed;
+ long flushed;
- log_error(LOG_LEVEL_ERROR, "Flushing header and buffers. Stepping back from filtering.");
+ log_error(LOG_LEVEL_INFO,
+ "Flushing header and buffers. Stepping back from filtering.");
hdr = list_to_text(csp->headers);
if (hdr == NULL)
log_error(LOG_LEVEL_ERROR, "Out of memory while trying to flush.");
rsp = cgi_error_memory();
send_crunch_response(csp, rsp);
-
+ mark_server_socket_tainted(csp);
return;
}
hdrlen = strlen(hdr);
if (write_socket(csp->cfd, hdr, hdrlen)
- || ((flushed = flush_socket(csp->cfd, csp)) < 0)
+ || ((flushed = flush_socket(csp->cfd, csp->iob)) < 0)
|| (write_socket(csp->cfd, buf, (size_t)len)))
{
- log_error(LOG_LEVEL_CONNECT, "Flush header and buffers to client failed: %E");
-
+ log_error(LOG_LEVEL_CONNECT,
+ "Flush header and buffers to client failed: %E");
freez(hdr);
+ mark_server_socket_tainted(csp);
return;
}
* we just flushed. len will be added a few lines below,
* hdrlen doesn't matter for LOG_LEVEL_CLF.
*/
- byte_count = (size_t)flushed;
+ byte_count = (unsigned long long)flushed;
freez(hdr);
content_filter = NULL;
server_body = 1;
if (write_socket(csp->cfd, buf, (size_t)len))
{
log_error(LOG_LEVEL_ERROR, "write to client failed: %E");
+ mark_server_socket_tainted(csp);
return;
}
}
- byte_count += (size_t)len;
+ byte_count += (unsigned long long)len;
continue;
}
else
{
- /* we're still looking for the end of the
- * server's header ... (does that make header
- * parsing an "out of body experience" ?
- */
-
- /*
- * buffer up the data we just read. If that fails,
- * there's little we can do but send our static
- * out-of-memory page.
+ const char *header_start;
+ /*
+ * We're still looking for the end of the server's header.
+ * Buffer up the data we just read. If that fails, there's
+ * little we can do but send our static out-of-memory page.
*/
if (add_to_iob(csp, buf, len))
{
log_error(LOG_LEVEL_ERROR, "Out of memory while looking for end of server headers.");
rsp = cgi_error_memory();
send_crunch_response(csp, rsp);
-
+ mark_server_socket_tainted(csp);
return;
}
+ header_start = csp->iob->cur;
+
/* Convert iob into something sed() can digest */
if (JB_ERR_PARSE == get_server_headers(csp))
{
if (ms_iis5_hack)
{
- /* Well, we tried our MS IIS/5
- * hack and it didn't work.
- * The header is incomplete
- * and there isn't anything
+ /*
+ * Well, we tried our MS IIS/5 hack and it didn't work.
+ * The header is incomplete and there isn't anything
* we can do about it.
*/
- break;
+ log_error(LOG_LEVEL_ERROR, "Invalid server headers. "
+ "Applying the MS IIS5 hack didn't help.");
+ log_error(LOG_LEVEL_CLF,
+ "%s - - [%T] \"%s\" 502 0", csp->ip_addr_str, http->cmd);
+ write_socket(csp->cfd, INVALID_SERVER_HEADERS_RESPONSE,
+ strlen(INVALID_SERVER_HEADERS_RESPONSE));
+ mark_server_socket_tainted(csp);
+ return;
}
else
{
- /* Since we have to wait for
- * more from the server before
- * we can parse the headers
- * we just continue here.
+ /*
+ * Since we have to wait for more from the server before
+ * we can parse the headers we just continue here.
*/
+ long header_offset = csp->iob->cur - header_start;
+ assert(csp->iob->cur >= header_start);
+ byte_count += (unsigned long long)(len - header_offset);
+ log_error(LOG_LEVEL_CONNECT, "Continuing buffering headers. "
+ "byte_count: %llu. header_offset: %d. len: %d.",
+ byte_count, header_offset, len);
continue;
}
}
log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" 502 0", csp->ip_addr_str, http->cmd);
write_socket(csp->cfd, NO_SERVER_DATA_RESPONSE, strlen(NO_SERVER_DATA_RESPONSE));
free_http_request(http);
+ mark_server_socket_tainted(csp);
+ return;
+ }
+
+ assert(csp->headers->first->str);
+ assert(!http->ssl);
+ if (strncmpic(csp->headers->first->str, "HTTP", 4) &&
+ strncmpic(csp->headers->first->str, "ICY", 3))
+ {
+ /*
+ * It doesn't look like a HTTP (or Shoutcast) response:
+ * tell the client and log the problem.
+ */
+ if (strlen(csp->headers->first->str) > 30)
+ {
+ csp->headers->first->str[30] = '\0';
+ }
+ log_error(LOG_LEVEL_ERROR,
+ "Invalid server or forwarder response. Starts with: %s",
+ csp->headers->first->str);
+ log_error(LOG_LEVEL_CLF,
+ "%s - - [%T] \"%s\" 502 0", csp->ip_addr_str, http->cmd);
+ write_socket(csp->cfd, INVALID_SERVER_HEADERS_RESPONSE,
+ strlen(INVALID_SERVER_HEADERS_RESPONSE));
+ free_http_request(http);
+ mark_server_socket_tainted(csp);
return;
}
- /* we have now received the entire header.
+ /*
+ * We have now received the entire server header,
* filter it and send the result to the client
*/
- if (JB_ERR_OK != sed(server_patterns, add_server_headers, csp))
+ if (JB_ERR_OK != sed(csp, FILTER_SERVER_HEADERS))
{
log_error(LOG_LEVEL_FATAL, "Failed to parse server headers.");
}
* and are done here after cleaning up.
*/
freez(hdr);
+ mark_server_socket_tainted(csp);
return;
}
/* Buffer and pcrs filter this if appropriate. */
if (!http->ssl) /* We talk plaintext */
{
-
-#ifdef FEATURE_KILL_POPUPS
- /* Start blocking popups if appropriate. */
- if ((csp->content_type & CT_TEXT) && /* It's a text / * MIME-Type */
- (csp->action->flags & ACTION_NO_POPUPS) != 0) /* Policy allows */
- {
- block_popups_now = 1;
- /*
- * Filter the part of the body that came in the same read
- * as the last headers:
- */
- filter_popups(csp->iob->cur, csp);
- }
-#endif /* def FEATURE_KILL_POPUPS */
content_filter = get_filter_function(csp);
}
/*
*/
if (!content_filter)
{
- /* write the server's (modified) header to
+ /*
+ * Write the server's (modified) header to
* the client (along with anything else that
* may be in the buffer)
*/
if (write_socket(csp->cfd, hdr, strlen(hdr))
- || ((len = flush_socket(csp->cfd, csp)) < 0))
+ || ((len = flush_socket(csp->cfd, csp->iob)) < 0))
{
log_error(LOG_LEVEL_CONNECT, "write header to client failed: %E");
- /* the write failed, so don't bother
- * mentioning it to the client...
- * it probably can't hear us anyway.
+ /*
+ * The write failed, so don't bother mentioning it
+ * to the client... it probably can't hear us anyway.
*/
freez(hdr);
+ mark_server_socket_tainted(csp);
return;
}
- byte_count += (size_t)len;
+ byte_count += (unsigned long long)len;
+ }
+ else
+ {
+ /*
+ * XXX: the header lenght should probably
+ * be calculated by get_server_headers().
+ */
+ long header_length = csp->iob->cur - header_start;
+ assert(csp->iob->cur > header_start);
+ byte_count += (unsigned long long)(len - header_length);
}
/* we're finished with the server's header */
freez(hdr);
server_body = 1;
- /* If this was a MS IIS/5 hack then it means
- * the server has already closed the
- * connection. Nothing more to read. Time
- * to bail.
+ /*
+ * If this was a MS IIS/5 hack then it means the server
+ * has already closed the connection. Nothing more to read.
+ * Time to bail.
*/
if (ms_iis5_hack)
{
- break;
+ log_error(LOG_LEVEL_ERROR,
+ "Closed server connection detected. "
+ "Applying the MS IIS5 hack didn't help.");
+ log_error(LOG_LEVEL_CLF,
+ "%s - - [%T] \"%s\" 502 0", csp->ip_addr_str, http->cmd);
+ write_socket(csp->cfd, INVALID_SERVER_HEADERS_RESPONSE,
+ strlen(INVALID_SERVER_HEADERS_RESPONSE));
+ mark_server_socket_tainted(csp);
+ return;
}
}
continue;
}
-
+ mark_server_socket_tainted(csp);
return; /* huh? we should never get here */
}
if (csp->content_length == 0)
{
/*
- * If Privoxy didn't recalculate the
- * Content-Lenght, byte_count is still
- * correct.
+ * If Privoxy didn't recalculate the Content-Lenght,
+ * byte_count is still correct.
*/
csp->content_length = byte_count;
}
- log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" 200 %d",
+#ifdef FEATURE_CONNECTION_KEEP_ALIVE
+ if ((csp->flags & CSP_FLAG_CONTENT_LENGTH_SET)
+ && (csp->expected_content_length != byte_count))
+ {
+ log_error(LOG_LEVEL_CONNECT,
+ "Received %llu bytes while expecting %llu.",
+ byte_count, csp->expected_content_length);
+ mark_server_socket_tainted(csp);
+ }
+#endif
+
+ log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" 200 %llu",
csp->ip_addr_str, http->ocmd, csp->content_length);
}
* Function : serve
*
* Description : This is little more than chat. We only "serve" to
- * to close any socket that chat may have opened.
+ * to close (or remember) any socket that chat may have
+ * opened.
*
* Parameters :
* 1 : csp = Current client state (buffers, headers, etc...)
static void serve(struct client_state *csp)
#endif /* def AMIGA */
{
+#ifdef FEATURE_CONNECTION_KEEP_ALIVE
+ int continue_chatting = 0;
+ do
+ {
+ chat(csp);
+
+ continue_chatting = (csp->config->feature_flags
+ & RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE)
+ && (csp->flags & CSP_FLAG_SERVER_CONNECTION_KEEP_ALIVE)
+ && (csp->cfd != JB_INVALID_SOCKET)
+ && (csp->sfd != JB_INVALID_SOCKET)
+ && socket_is_still_usable(csp->sfd);
+
+ /*
+ * Get the csp in a mostly vergin state again.
+ * XXX: Should be done elsewhere.
+ */
+ csp->content_type = 0;
+ csp->content_length = 0;
+ csp->expected_content_length = 0;
+ list_remove_all(csp->headers);
+ freez(csp->iob->buf);
+ memset(csp->iob, 0, sizeof(csp->iob));
+ freez(csp->error_message);
+ free_http_request(csp->http);
+ destroy_list(csp->headers);
+ destroy_list(csp->tags);
+ free_current_action(csp->action);
+ if (NULL != csp->fwd)
+ {
+ unload_forward_spec(csp->fwd);
+ csp->fwd = NULL;
+ }
+
+ /* XXX: Store per-connection flags someplace else. */
+ csp->flags = CSP_FLAG_ACTIVE | (csp->flags & CSP_FLAG_TOGGLED_ON);
+
+ if (continue_chatting)
+ {
+ log_error(LOG_LEVEL_CONNECT,
+ "Waiting for the next client request. "
+ "Keeping the server socket %d to %s open.",
+ csp->sfd, csp->server_connection.host);
+
+ if ((csp->flags & CSP_FLAG_CLIENT_CONNECTION_KEEP_ALIVE)
+ && data_is_available(csp->cfd, csp->config->keep_alive_timeout)
+ && socket_is_still_usable(csp->cfd))
+ {
+ log_error(LOG_LEVEL_CONNECT, "Client request arrived in "
+ "time or the client closed the connection.");
+ }
+ else
+ {
+ log_error(LOG_LEVEL_CONNECT,
+ "No additional client request received in time. "
+ "Closing server socket %d, initially opened for %s.",
+ csp->sfd, csp->server_connection.host);
+ break;
+ }
+ }
+ else if (csp->sfd != JB_INVALID_SOCKET)
+ {
+ log_error(LOG_LEVEL_CONNECT,
+ "The connection on server socket %d to %s isn't reusable. "
+ "Closing.", csp->sfd, csp->server_connection.host);
+ }
+ } while (continue_chatting);
+#else
chat(csp);
- close_socket(csp->cfd);
+#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
if (csp->sfd != JB_INVALID_SOCKET)
{
close_socket(csp->sfd);
}
+ if (csp->cfd != JB_INVALID_SOCKET)
+ {
+ close_socket(csp->cfd);
+ }
+
csp->flags &= ~CSP_FLAG_ACTIVE;
}
#endif
-#if defined(unix)
+#if !defined(_WIN32) || defined(_WIN_CONSOLE)
/*********************************************************************
*
* Function : usage
exit(2);
}
-#endif /* defined(unix) */
+#endif /* #if !defined(_WIN32) || defined(_WIN_CONSOLE) */
+#ifdef MUTEX_LOCKS_AVAILABLE
+/*********************************************************************
+ *
+ * Function : privoxy_mutex_lock
+ *
+ * Description : Locks a mutex.
+ *
+ * Parameters :
+ * 1 : mutex = The mutex to lock.
+ *
+ * Returns : Void. May exit in case of errors.
+ *
+ *********************************************************************/
+void privoxy_mutex_lock(privoxy_mutex_t *mutex)
+{
+#ifdef FEATURE_PTHREAD
+ int err = pthread_mutex_lock(mutex);
+ if (err)
+ {
+ if (mutex != &log_mutex)
+ {
+ log_error(LOG_LEVEL_FATAL,
+ "Mutex locking failed: %s.\n", strerror(err));
+ }
+ exit(1);
+ }
+#else
+ EnterCriticalSection(mutex);
+#endif /* def FEATURE_PTHREAD */
+}
+
+
+/*********************************************************************
+ *
+ * Function : privoxy_mutex_unlock
+ *
+ * Description : Unlocks a mutex.
+ *
+ * Parameters :
+ * 1 : mutex = The mutex to unlock.
+ *
+ * Returns : Void. May exit in case of errors.
+ *
+ *********************************************************************/
+void privoxy_mutex_unlock(privoxy_mutex_t *mutex)
+{
+#ifdef FEATURE_PTHREAD
+ int err = pthread_mutex_unlock(mutex);
+ if (err)
+ {
+ if (mutex != &log_mutex)
+ {
+ log_error(LOG_LEVEL_FATAL,
+ "Mutex unlocking failed: %s.\n", strerror(err));
+ }
+ exit(1);
+ }
+#else
+ LeaveCriticalSection(mutex);
+#endif /* def FEATURE_PTHREAD */
+}
+
+
+/*********************************************************************
+ *
+ * Function : privoxy_mutex_init
+ *
+ * Description : Prepares a mutex.
+ *
+ * Parameters :
+ * 1 : mutex = The mutex to initialize.
+ *
+ * Returns : Void. May exit in case of errors.
+ *
+ *********************************************************************/
+static void privoxy_mutex_init(privoxy_mutex_t *mutex)
+{
+#ifdef FEATURE_PTHREAD
+ int err = pthread_mutex_init(mutex, 0);
+ if (err)
+ {
+ printf("Fatal error. Mutex initialization failed: %s.\n",
+ strerror(err));
+ exit(1);
+ }
+#else
+ InitializeCriticalSection(mutex);
+#endif /* def FEATURE_PTHREAD */
+}
+#endif /* def MUTEX_LOCKS_AVAILABLE */
+
/*********************************************************************
*
* Function : initialize_mutexes
*********************************************************************/
static void initialize_mutexes(void)
{
- int err = 0;
-
-#ifdef FEATURE_PTHREAD
+#ifdef MUTEX_LOCKS_AVAILABLE
/*
* Prepare global mutex semaphores
*/
- err = pthread_mutex_init(&log_mutex, 0);
-
- if (!err) err = pthread_mutex_init(&log_init_mutex, 0);
+ privoxy_mutex_init(&log_mutex);
+ privoxy_mutex_init(&log_init_mutex);
+ privoxy_mutex_init(&connection_reuse_mutex);
/*
* XXX: The assumptions below are a bit naive
* thread safe.
*/
#if !defined(HAVE_GETHOSTBYADDR_R) || !defined(HAVE_GETHOSTBYNAME_R)
- if (!err) err = pthread_mutex_init(&resolver_mutex, 0);
+ privoxy_mutex_init(&resolver_mutex);
#endif /* !defined(HAVE_GETHOSTBYADDR_R) || !defined(HAVE_GETHOSTBYNAME_R) */
/*
* XXX: should we use a single mutex for
* localtime() and gmtime() as well?
*/
#ifndef HAVE_GMTIME_R
- if (!err) err = pthread_mutex_init(&gmtime_mutex, 0);
+ privoxy_mutex_init(&gmtime_mutex);
#endif /* ndef HAVE_GMTIME_R */
#ifndef HAVE_LOCALTIME_R
- if (!err) err = pthread_mutex_init(&localtime_mutex, 0);
+ privoxy_mutex_init(&localtime_mutex);
#endif /* ndef HAVE_GMTIME_R */
#ifndef HAVE_RANDOM
- if (!err) err = pthread_mutex_init(&rand_mutex, 0);
+ privoxy_mutex_init(&rand_mutex);
#endif /* ndef HAVE_RANDOM */
-#endif /* FEATURE_PTHREAD */
-
- /*
- * TODO: mutex support for mingw32 would be swell.
- */
-
- if (err)
- {
- printf("Fatal error. Mutex initialization failed: %s.\n",
- strerror(err));
- exit(1);
- }
-
- return;
+#endif /* def MUTEX_LOCKS_AVAILABLE */
}
#endif
;
+ /* Prepare mutexes if supported and necessary. */
+ initialize_mutexes();
+
+ /* Enable logging until further notice. */
+ init_log_module();
+
/*
* Parse the command line arguments
*
* XXX: simply printing usage information in case of
- * invalid arguments isn't particular user friendly.
+ * invalid arguments isn't particularly user friendly.
*/
while (++argc_pos < argc)
{
else if (strcmp(argv[argc_pos], "--no-daemon" ) == 0)
{
+ set_debug_level(LOG_LEVEL_FATAL | LOG_LEVEL_ERROR | LOG_LEVEL_INFO);
no_daemon = 1;
}
} /* -END- while (more arguments) */
+ show_version(Argv[0]);
+
#if defined(unix)
if ( *configfile != '/' )
{
files->next = NULL;
clients->next = NULL;
+ /* XXX: factor out initialising after the next stable release. */
#ifdef AMIGA
InitAmiga();
#elif defined(_WIN32)
InitWin32();
#endif
- /* Prepare mutexes if supported and necessary. */
- initialize_mutexes();
-
random_seed = (unsigned int)time(NULL);
#ifdef HAVE_RANDOM
srandom(random_seed);
close ( fd );
}
#endif /* 1 */
- /* FIXME: should close stderr (fd 2) here too, but the test
- * for existence
- * and load config file is done in listen_loop() and puts
- * some messages on stderr there.
+ /*
+ * stderr (fd 2) will be closed later on,
+ * when the config file has been parsed.
*/
close( 0 );
{
log_error(LOG_LEVEL_FATAL, "Cannot setgid(): Insufficient permissions.");
}
+ if (NULL != grp)
+ {
+ if (setgroups(1, &grp->gr_gid))
+ {
+ log_error(LOG_LEVEL_FATAL, "setgroups() failed: %E");
+ }
+ }
+ else if (initgroups(pw->pw_name, pw->pw_gid))
+ {
+ log_error(LOG_LEVEL_FATAL, "initgroups() failed: %E");
+ }
if (do_chroot)
{
if (!pw->pw_dir)
int result;
jb_socket bfd;
- if ( (config->haddr != NULL)
- && (config->haddr[0] == '1')
- && (config->haddr[1] == '2')
- && (config->haddr[2] == '7')
- && (config->haddr[3] == '.') )
- {
- log_error(LOG_LEVEL_INFO, "Listening on port %d for local connections only",
- config->hport);
- }
- else if (config->haddr == NULL)
+ if (config->haddr == NULL)
{
log_error(LOG_LEVEL_INFO, "Listening on port %d on all IP addresses",
config->hport);
{
struct client_state *csp = NULL;
jb_socket bfd;
- struct configuration_spec * config;
+ struct configuration_spec *config;
+ unsigned int active_threads = 0;
config = load_config();
+#ifdef FEATURE_CONNECTION_KEEP_ALIVE
+ /*
+ * XXX: Should be relocated once it no
+ * longer needs to emit log messages.
+ */
+ initialize_reusable_connections();
+#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
+
bfd = bind_port_helper(config);
#ifdef FEATURE_GRACEFUL_TERMINATION
/*
* Free data that was used by died threads
*/
- sweep();
+ active_threads = sweep();
#if defined(unix)
/*
*/
if (received_hup_signal)
{
- init_error_log(Argv[0], config->logfile, config->debug);
+ if (NULL != config->logfile)
+ {
+ init_error_log(Argv[0], config->logfile);
+ }
received_hup_signal = 0;
}
#endif
-#ifdef __OS2__
-#ifdef FEATURE_COOKIE_JAR
- /*
- * Need a workaround here: we have to fclose() the jarfile, or we die because it's
- * already open. I think unload_configfile() is not being run, which should do
- * this work. Until that can get resolved, we'll use this workaround.
- */
- if (csp)
- if(csp->config)
- if (csp->config->jar)
- {
- fclose(csp->config->jar);
- csp->config->jar = NULL;
- }
-#endif /* FEATURE_COOKIE_JAR */
-#endif /* __OS2__ */
-
if ( NULL == (csp = (struct client_state *) zalloc(sizeof(*csp))) )
{
log_error(LOG_LEVEL_FATAL, "malloc(%d) for csp failed: %E", sizeof(*csp));
{
/*
* Since we were listening to the "old port", we will not see
- * a "listen" param change until the next IJB request. So, at
+ * a "listen" param change until the next request. So, at
* least 1 more request must be made for us to find the new
* setting. I am simply closing the old socket and binding the
* new one.
#ifdef FEATURE_TOGGLE
if (global_toggle_state)
+#endif /* def FEATURE_TOGGLE */
{
csp->flags |= CSP_FLAG_TOGGLED_ON;
}
-#endif /* def FEATURE_TOGGLE */
if (run_loader(csp))
{
{
log_error(LOG_LEVEL_CONNECT, "Connection from %s dropped due to ACL", csp->ip_addr_str);
close_socket(csp->cfd);
+ freez(csp->ip_addr_str);
freez(csp);
continue;
}
#endif /* def FEATURE_ACL */
+ if ((0 != config->max_client_connections)
+ && (active_threads >= config->max_client_connections))
+ {
+ log_error(LOG_LEVEL_CONNECT,
+ "Rejecting connection from %s. Maximum number of connections reached.",
+ csp->ip_addr_str);
+ write_socket(csp->cfd, TOO_MANY_CONNECTIONS_RESPONSE,
+ strlen(TOO_MANY_CONNECTIONS_RESPONSE));
+ close_socket(csp->cfd);
+ freez(csp->ip_addr_str);
+ freez(csp);
+ continue;
+ }
+
/* add it to the list of clients */
csp->next = clients->next;
clients->next = csp;
#undef SELECTED_ONE_OPTION
/* end of cpp switch () */
- if (child_id < 0) /* failed */
+ if (child_id < 0)
{
- char buf[BUFFER_SIZE];
-
- log_error(LOG_LEVEL_ERROR, "can't fork: %E");
-
- snprintf(buf , sizeof(buf), "Privoxy: can't fork: errno = %d", errno);
-
- write_socket(csp->cfd, buf, strlen(buf));
+ /*
+ * Spawning the child failed, assume it's because
+ * there are too many children running already.
+ * XXX: If you assume ...
+ */
+ log_error(LOG_LEVEL_ERROR,
+ "Unable to take any additional connections: %E");
+ write_socket(csp->cfd, TOO_MANY_CONNECTIONS_RESPONSE,
+ strlen(TOO_MANY_CONNECTIONS_RESPONSE));
close_socket(csp->cfd);
csp->flags &= ~CSP_FLAG_ACTIVE;
- sleep(5);
- continue;
}
}
else
#endif
freez(configfile);
-#ifdef FEATURE_COOKIE_JAR
- if (NULL != config->jar)
- {
- fclose(config->jar);
- }
-#endif
-
#if defined(_WIN32) && !defined(_WIN_CONSOLE)
/* Cleanup - remove taskbar icon etc. */
TermLogWindow();
projects / privoxy.git / blobdiff