-const char jcc_rcs[] = "$Id: jcc.c,v 1.202 2008/11/02 18:40:34 fabiankeil Exp $";
+const char jcc_rcs[] = "$Id: jcc.c,v 1.384 2012/07/27 17:31:10 fabiankeil Exp $";
/*********************************************************************
*
* File : $Source: /cvsroot/ijbswa/current/jcc.c,v $
* Purpose : Main file. Contains main() method, main loop, and
* the main connection-handling function.
*
- * Copyright : Written by and Copyright (C) 2001-2008 the SourceForge
+ * Copyright : Written by and Copyright (C) 2001-2010 the
* Privoxy team. http://www.privoxy.org/
*
* Based on the Internet Junkbuster originally written
* or write to the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
- * Revisions :
- * $Log: jcc.c,v $
- * Revision 1.202 2008/11/02 18:40:34 fabiankeil
- * If we received a different amount of data than we expected,
- * log a warning and make sure the server socket isn't reused.
- *
- * Revision 1.201 2008/11/02 16:48:20 fabiankeil
- * Revert revision 1.195 and try again.
- *
- * Revision 1.200 2008/10/26 16:53:18 fabiankeil
- * Fix gcc44 warning.
- *
- * Revision 1.199 2008/10/26 15:36:10 fabiankeil
- * Remove two debug messages with LOG_LEVEL_INFO.
- *
- * Revision 1.198 2008/10/22 15:19:55 fabiankeil
- * Once More, With Feeling: if there is no logfile
- * because the user didn't specify one, we shouldn't
- * call init_error_log() after receiving SIGHUP either.
- *
- * Revision 1.197 2008/10/20 17:02:40 fabiankeil
- * If SIGHUP is received while we aren't running in daemon
- * mode, calling init_error_log() would be a mistake.
- *
- * Revision 1.196 2008/10/16 09:16:41 fabiankeil
- * - Fix two gcc44 conversion warnings.
- * - Don't bother logging the last five bytes
- * of the 0-chunk.
- *
- * Revision 1.195 2008/10/13 16:04:37 fabiankeil
- * Make sure we don't try to reuse tainted server sockets.
- *
- * Revision 1.194 2008/10/12 18:35:18 fabiankeil
- * The last commit was a bit too ambitious, apparently the content
- * length adjustment is only necessary if we aren't buffering.
- *
- * Revision 1.193 2008/10/12 15:57:35 fabiankeil
- * Fix content length calculation if we read headers
- * and the start of the body at once. Now that we have
- * FEATURE_CONNECTION_KEEP_ALIVE, it actually matters.
- *
- * Revision 1.192 2008/10/11 18:19:14 fabiankeil
- * Even more chat() cosmetics.
- *
- * Revision 1.191 2008/10/11 18:00:14 fabiankeil
- * Reformat some comments in chat().
- *
- * Revision 1.190 2008/10/11 14:58:00 fabiankeil
- * In case of chunk-encoded content, stop reading if
- * the buffer looks like it ends with the last chunk.
- *
- * Revision 1.189 2008/10/11 09:53:00 fabiankeil
- * Let server_response_is_complete() deal properly with
- * content that is neither buffered nor read all at once.
- *
- * Revision 1.188 2008/10/09 18:21:41 fabiankeil
- * Flush work-in-progress changes to keep outgoing connections
- * alive where possible. Incomplete and mostly #ifdef'd out.
- *
- * Revision 1.187 2008/09/07 12:35:05 fabiankeil
- * Add mutex lock support for _WIN32.
- *
- * Revision 1.186 2008/09/04 08:13:58 fabiankeil
- * Prepare for critical sections on Windows by adding a
- * layer of indirection before the pthread mutex functions.
- *
- * Revision 1.185 2008/08/30 12:03:07 fabiankeil
- * Remove FEATURE_COOKIE_JAR.
- *
- * Revision 1.184 2008/08/22 15:34:45 fabiankeil
- * - Silence LLVM/Clang complaint.
- * - Make received_hup_signal static.
- * - Hide definitions for basedir, pidfile and received_hup_signal
- * from __EMX__ as they only seem to be used in case of #ifdef unix.
- *
- * Revision 1.183 2008/08/21 07:09:35 fabiankeil
- * Accept Shoutcast responses again. Problem reported
- * and fix suggested by Stefan in #2062860.
- *
- * Revision 1.182 2008/06/27 11:13:56 fabiankeil
- * Fix possible NULL-pointer dereference reported
- * by din_a4 in #2003937. Pointy hat to me.
- *
- * Revision 1.181 2008/05/21 15:47:15 fabiankeil
- * Streamline sed()'s prototype and declare
- * the header parse and add structures static.
- *
- * Revision 1.180 2008/05/21 15:26:32 fabiankeil
- * - Mark csp as immutable for send_crunch_response().
- * - Fix comment spelling.
- *
- * Revision 1.179 2008/05/20 20:13:32 fabiankeil
- * Factor update_server_headers() out of sed(), ditch the
- * first_run hack and make server_patterns_light static.
- *
- * Revision 1.178 2008/05/10 13:23:38 fabiankeil
- * Don't provide get_header() with the whole client state
- * structure when it only needs access to csp->iob.
- *
- * Revision 1.177 2008/05/10 11:51:12 fabiankeil
- * Make the "read the rest of the headers" loop a bit more readable.
- *
- * Revision 1.176 2008/05/10 11:37:57 fabiankeil
- * - Instead of logging when the IIS5 hack is enabled, log when it fails.
- * - Remove useless comment.
- *
- * Revision 1.175 2008/05/09 18:53:59 fabiankeil
- * Fix comment grammar.
- *
- * Revision 1.174 2008/05/07 18:05:53 fabiankeil
- * Remove the pointless buffer in client_protocol_is_unsupported().
- *
- * Revision 1.173 2008/05/06 15:09:00 fabiankeil
- * Least-effort fix for bug #1821930 (reported by Lee):
- * If the response doesn't look like HTTP,
- * tell the client and log the problem.
- *
- * Revision 1.172 2008/04/16 16:38:21 fabiankeil
- * Don't pass the whole csp structure to flush_socket()
- * when it only needs a file descriptor and a buffer.
- *
- * Revision 1.171 2008/03/27 18:27:25 fabiankeil
- * Remove kill-popups action.
- *
- * Revision 1.170 2008/03/06 16:33:46 fabiankeil
- * If limit-connect isn't used, don't limit CONNECT requests to port 443.
- *
- * Revision 1.169 2008/03/04 18:30:39 fabiankeil
- * Remove the treat-forbidden-connects-like-blocks action. We now
- * use the "blocked" page for forbidden CONNECT requests by default.
- *
- * Revision 1.168 2008/03/02 12:25:25 fabiankeil
- * Also use shiny new connect_port_is_forbidden() in jcc.c.
- *
- * Revision 1.167 2008/02/23 16:57:12 fabiankeil
- * Rename url_actions() to get_url_actions() and let it
- * use the standard parameter ordering.
- *
- * Revision 1.166 2008/02/23 16:33:43 fabiankeil
- * Let forward_url() use the standard parameter ordering
- * and mark its second parameter immutable.
- *
- * Revision 1.165 2008/02/02 19:36:56 fabiankeil
- * Remove the "Listening ... for local connections only" log message.
- * Whether or not remote connections are able to reach Privoxy is up
- * to the operating system.
- *
- * Revision 1.164 2007/12/16 18:32:46 fabiankeil
- * Prevent the log messages for CONNECT requests to unacceptable
- * ports from printing the limit-connect argument as [null] if
- * limit-connect hasn't been explicitly enabled.
- *
- * Revision 1.163 2007/12/13 01:47:11 david__schmidt
- * Make sure all console-mode apps get a usage() instance
- *
- * Revision 1.162 2007/12/06 17:54:57 fabiankeil
- * Reword NO_SERVER_DATA_RESPONSE to make it harder
- * to misunderstand what the message is all about.
- *
- * Revision 1.161 2007/12/04 19:44:22 fabiankeil
- * Unbreak trustfile which previously didn't work without
- * FEATURE_TOGGLE. Fixes BR#1843585, reported by Lee.
- *
- * Revision 1.160 2007/11/29 18:00:29 fabiankeil
- * Plug memory leak. Spotted by Valgrind, triggered by
- * Privoxy-Regression-Test feeding proxyfuzz.py.
- *
- * Revision 1.159 2007/11/24 14:34:09 fabiankeil
- * In the HTTP snipplets, refer to the client as client.
- *
- * Revision 1.158 2007/11/11 16:44:17 fabiankeil
- * Emit a log message when activating the MS IIS5 hack.
- *
- * Revision 1.157 2007/11/03 17:34:49 fabiankeil
- * Log the "weak randomization factor" warning only
- * once for mingw32 and provide some more details.
- *
- * Revision 1.156 2007/11/01 18:20:58 fabiankeil
- * Initialize log module after initializing mutexes, future
- * deadlocks in that code should now work cross-platform.
- *
- * Revision 1.155 2007/10/23 20:12:45 fabiankeil
- * Fix first CSUCCEED line to end in \r\n as required by RFC1945.
- * Reported by Bert van Leeuwen in BR#1818808.
- *
- * Revision 1.154 2007/10/19 17:00:08 fabiankeil
- * Downgrade "Flushing header and buffers" message to LOG_LEVEL_INFO.
- *
- * Revision 1.153 2007/10/14 14:12:41 fabiankeil
- * When in daemon mode, close stderr after the configuration file has been
- * parsed the first time. If logfile isn't set, stop logging. Fixes BR#897436.
- *
- * Revision 1.152 2007/10/04 18:03:34 fabiankeil
- * - Fix a crash when parsing invalid requests whose first header
- * is rejected by get_header(). Regression (re?)introduced
- * in r1.143 by yours truly.
- * - Move ACTION_VANILLA_WAFER handling into parsers.c's
- * client_cookie_adder() to make sure send-vanilla-wafer can be
- * controlled through tags (and thus regression-tested).
- *
- * Revision 1.151 2007/09/29 10:21:16 fabiankeil
- * - Move get_filter_function() from jcc.c to filters.c
- * so the filter functions can be static.
- * - Don't bother filtering body-less responses.
- *
- * Revision 1.150 2007/09/28 16:39:29 fabiankeil
- * Execute content filters through execute_content_filter().
- *
- * Revision 1.149 2007/09/04 15:08:48 fabiankeil
- * Initialize req to NULL to make sure it's defined if the
- * first read_socket() call fails. Reported by icmp30.
- *
- * Revision 1.148 2007/08/26 16:47:13 fabiankeil
- * Add Stephen Gildea's --pre-chroot-nslookup patch [#1276666],
- * extensive comments moved to user manual.
- *
- * Revision 1.147 2007/08/25 14:42:40 fabiankeil
- * Don't crash if a broken header filter wiped out the request line.
- *
- * Revision 1.146 2007/08/20 17:09:32 fabiankeil
- * Fix byte_count calculation in case of flushes
- * and don't parse the server headers a second time.
- *
- * Revision 1.145 2007/08/19 13:13:31 fabiankeil
- * - If there's a connection problem after we already forwarded
- * parts of the original content, just hang up. Fixes BR#1776724.
- * - Fix warnings about unused code on mingw32.
- * - In case of flushes, calculate the byte count
- * less incorrectly (I think).
- *
- * Revision 1.144 2007/08/11 14:43:22 fabiankeil
- * Add some more prototypes for static functions.
- *
- * Revision 1.143 2007/08/05 13:58:19 fabiankeil
- * Comment out request_contains_null_bytes() until it's used again.
- *
- * Revision 1.142 2007/08/05 13:50:26 fabiankeil
- * #1763173 from Stefan Huehner: s@const static@static const@
- * and declare some more functions static.
- *
- * Revision 1.141 2007/08/04 09:56:23 fabiankeil
- * - Log rejected CONNECT requests with LOG_LEVEL_INFO
- * and explain why they were rejected in the first place.
- * - Fix the LOG_LEVEL_CLF message for crunches of unallowed
- * CONNECT requests. The request line was missing.
- * - Add two more XXX reminders as we don't have enough already.
- *
- * Revision 1.140 2007/07/21 11:51:36 fabiankeil
- * As Hal noticed, checking dispatch_cgi() as the last cruncher
- * looks like a bug if CGI requests are blocked unintentionally,
- * so don't do it unless the user enabled the new config option
- * "allow-cgi-request-crunching".
- *
- * Revision 1.139 2007/07/14 07:46:41 fabiankeil
- * - Allow to rewrite the request destination behind the client's back.
- * - Turn the weird-looking unconditional for loop that
- * reads the client request into a conditional while loop.
- * Move the stuff that only runs once out of the loop.
- * - Move parts of chat(), server_content_type() and the
- * necessary stuff to fix BR#1750917 into get_filter_function().
- *
- * Revision 1.138 2007/06/03 18:45:18 fabiankeil
- * Temporary workaround for BR#1730105.
- *
- * Revision 1.137 2007/06/01 18:16:36 fabiankeil
- * Use the same mutex for gethostbyname() and gethostbyaddr() to prevent
- * deadlocks and crashes on OpenBSD and possibly other OS with neither
- * gethostbyname_r() nor gethostaddr_r(). Closes BR#1729174.
- * Thanks to Ralf Horstmann for report and solution.
- *
- * Revision 1.136 2007/06/01 16:41:11 fabiankeil
- * Add forward-override{} to change the forwarding settings through
- * action sections. This is mainly interesting to forward different
- * clients differently (for example based on User-Agent or request
- * origin).
- *
- * Revision 1.135 2007/05/24 17:03:50 fabiankeil
- * - Let usage() mention the --chroot parameter.
- * - Use read_socket() consistently and always leave
- * the last buffer byte alone, even in cases where
- * null termination (currently) doesn't matter.
- *
- * Revision 1.134 2007/05/16 14:59:46 fabiankeil
- * - Fix config file loading on Unix if no config file is specified.
- * Since r1.97 Privoxy would always interpret the last argument as
- * config file, even if it's a valid command line option.
- * - Abort in case of unrecognized command line options. Closes #1719696.
- * - Remove a bunch of unnecessary strcpy() calls (yay for c&p without thinking).
- * - Replace the remaining strcpy() and strcat() calls with strlcpy() and strcat().
- *
- * Revision 1.133 2007/05/04 11:23:19 fabiankeil
- * - Don't rerun crunchers that only depend on the request URL.
- * - Don't count redirects and CGI requests as "blocked requests".
- *
- * Revision 1.132 2007/04/25 15:15:17 fabiankeil
- * Support crunching based on tags created by server-header taggers.
- *
- * Revision 1.131 2007/04/22 13:24:50 fabiankeil
- * Make HTTP snippets static (again). Add a Content-Type for those
- * with content so the browser doesn't guess it based on the URL.
- *
- * Revision 1.130 2007/04/19 13:47:34 fabiankeil
- * Move crunching and request line rebuilding out of chat().
- *
- * Revision 1.129 2007/04/15 16:39:20 fabiankeil
- * Introduce tags as alternative way to specify which
- * actions apply to a request. At the moment tags can be
- * created based on client and server headers.
- *
- * Revision 1.128 2007/03/25 16:55:54 fabiankeil
- * Don't CLF-log CONNECT requests twice.
- *
- * Revision 1.127 2007/03/20 13:53:17 fabiankeil
- * Log the source address for ACL-related connection drops.
- *
- * Revision 1.126 2007/03/17 15:20:05 fabiankeil
- * New config option: enforce-blocks.
- *
- * Revision 1.125 2007/03/09 14:12:00 fabiankeil
- * - Move null byte check into separate function.
- * - Don't confuse the client with error pages
- * if a CONNECT request was already confirmed.
- *
- * Revision 1.124 2007/02/23 14:59:54 fabiankeil
- * Speed up NULL byte escaping and only log the complete
- * NULL byte requests with header debugging enabled.
- *
- * Revision 1.123 2007/02/21 18:42:10 fabiankeil
- * Answer requests that contain NULL bytes with
- * a custom response instead of waiting for more
- * data until the client eventually hangs up.
- *
- * Revision 1.122 2007/02/07 11:12:02 fabiankeil
- * - Move delivery and logging of crunched responses
- * from chat() into send_crunch_response().
- * - Display the reason for generating http_responses.
- * - Log the content length for LOG_LEVEL_CLF correctly
- * (still incorrect for some fixed responses).
- * - Reword an incorrect comment about
- * treat-forbidden-connects-like-blocks violating
- * the specs.
- * - Add some log messages.
- *
- * Revision 1.121 2007/01/27 10:52:56 fabiankeil
- * Move mutex initialization into separate
- * function and exit in case of errors.
- *
- * Revision 1.120 2007/01/26 14:18:42 fabiankeil
- * - Start to reduce chat()'s line count and move
- * parts of it into separate functions.
- * - Add "HTTP/1.1 100 Continue" hack for BR 756734.
- *
- * Revision 1.119 2007/01/25 14:02:30 fabiankeil
- * - Add Proxy-Agent header to HTTP snippets that are
- * supposed to reach HTTP clients only.
- * - Made a few CONNECT log messages more descriptive.
- * - Catch completely empty server responses (as seen
- * with Tor's fake ".noconnect" top level domain).
- * - Use shiny new "forwarding-failed" template for socks errors.
- *
- * Revision 1.118 2007/01/07 07:43:43 joergs
- * AmigaOS4 support added.
- *
- * Revision 1.117 2006/12/31 17:56:37 fabiankeil
- * Added config option accept-intercepted-requests
- * and disabled it by default.
- *
- * Revision 1.116 2006/12/29 19:08:22 fabiankeil
- * Reverted parts of my last commit
- * to keep error handling working.
- *
- * Revision 1.115 2006/12/29 17:38:57 fabiankeil
- * Fixed gcc43 conversion warnings.
- *
- * Revision 1.114 2006/12/27 18:52:02 fabiankeil
- * Fix -pedantic ISO C warning about converting
- * from function pointer to object pointer.
- *
- * Revision 1.113 2006/12/26 17:38:50 fabiankeil
- * Silence compiler warning I introduced with my last commit.
- *
- * Revision 1.112 2006/12/26 17:31:41 fabiankeil
- * Mutex protect rand() if POSIX threading
- * is used, warn the user if that's not possible
- * and stop using it on _WIN32 where it could
- * cause crashes.
- *
- * Revision 1.111 2006/12/23 16:15:06 fabiankeil
- * Don't prevent core dumps by catching SIGABRT.
- * It's rude and makes debugging unreasonable painful.
- *
- * Revision 1.110 2006/12/13 14:52:53 etresoft
- * Fix build failure on MacOS X. Global symbols can be either static or extern, but not both.
- *
- * Revision 1.109 2006/12/06 19:41:40 fabiankeil
- * Privoxy is now able to run as intercepting
- * proxy in combination with any packet filter
- * that does the port redirection. The destination
- * is extracted from the "Host:" header which
- * should be available for nearly all requests.
- *
- * Moved HTTP snipplets into jcc.c.
- * Added error message for gopher proxy requests.
- *
- * Revision 1.108 2006/11/28 15:38:51 fabiankeil
- * Only unlink the pidfile if it's actually used.
- *
- * Change order of interception checks to make
- * it possible to block or redirect requests for
- * the cgi pages.
- *
- * Revision 1.107 2006/11/13 19:05:51 fabiankeil
- * Make pthread mutex locking more generic. Instead of
- * checking for OSX and OpenBSD, check for FEATURE_PTHREAD
- * and use mutex locking unless there is an _r function
- * available. Better safe than sorry.
- *
- * Fixes "./configure --disable-pthread" and should result
- * in less threading-related problems on pthread-using platforms,
- * but it still doesn't fix BR#1122404.
- *
- * Revision 1.106 2006/11/06 19:58:23 fabiankeil
- * Move pthread.h inclusion from jcc.c to jcc.h.
- * Fixes build on x86-freebsd1 (FreeBSD 5.4-RELEASE).
- *
- * Revision 1.105 2006/11/06 14:26:02 fabiankeil
- * Don't exit after receiving the second SIGHUP on Solaris.
- *
- * Fixes BR 1052235, but the same problem may exist on other
- * systems. Once 3.0.6 is out we should use sigset()
- * where available and see if it breaks anything.
- *
- * Revision 1.104 2006/09/23 13:26:38 roro
- * Replace TABs by spaces in source code.
- *
- * Revision 1.103 2006/09/21 12:54:43 fabiankeil
- * Fix +redirect{}. Didn't work with -fast-redirects.
- *
- * Revision 1.102 2006/09/06 13:03:04 fabiankeil
- * Respond with 400 and a short text message
- * if the client tries to use Privoxy as FTP proxy.
- *
- * Revision 1.101 2006/09/06 09:23:37 fabiankeil
- * Make number of retries in case of forwarded-connect problems
- * a config file option (forwarded-connect-retries) and use 0 as
- * default.
- *
- * Revision 1.100 2006/09/03 19:42:59 fabiankeil
- * Set random(3) seed.
- *
- * Revision 1.99 2006/09/02 15:36:42 fabiankeil
- * Follow the OpenBSD port's lead and protect the resolve
- * functions on OpenBSD as well.
- *
- * Revision 1.98 2006/08/24 11:01:34 fabiankeil
- * --user fix. Only use the user as group if no group is specified.
- * Solves BR 1492612. Thanks to Spinor S. and David Laight.
- *
- * Revision 1.97 2006/08/18 15:23:17 david__schmidt
- * Windows service (re-)integration
- *
- * The new args are:
- *
- * --install[:service_name]
- * --uninstall[:service_name]
- * --service
- *
- * They work as follows:
- * --install will create a service for you and then terminate.
- * By default the service name will be "privoxy" (without the quotes).
- * However you can run multiple services if you wish, just by adding
- * a colon and then a name (no spaces).
- *
- * --uninstall follows the exact same rules a --install.
- *
- * --service is used when the program is executed by the service
- * control manager, and in normal circumstances would never be
- * used as a command line argument.
- *
- * Revision 1.96 2006/08/15 20:12:36 david__schmidt
- * Windows service integration
- *
- * Revision 1.95 2006/08/03 02:46:41 david__schmidt
- * Incorporate Fabian Keil's patch work:
-http://www.fabiankeil.de/sourcecode/privoxy/
- *
- * Revision 1.94 2006/07/18 14:48:46 david__schmidt
- * Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- * with what was really the latest development (the v_3_0_branch branch)
- *
- * Revision 1.92.2.16 2005/04/03 20:10:50 david__schmidt
- * Thanks to Jindrich Makovicka for a race condition fix for the log
- * file. The race condition remains for non-pthread implementations.
- * Reference patch #1175720.
- *
- * Revision 1.92.2.15 2004/10/03 12:53:32 david__schmidt
- * Add the ability to check jpeg images for invalid
- * lengths of comment blocks. Defensive strategy
- * against the exploit:
- * Microsoft Security Bulletin MS04-028
- * Buffer Overrun in JPEG Processing (GDI+) Could
- * Allow Code Execution (833987)
- * Enabled with +inspect-jpegs in actions files.
- *
- * Revision 1.92.2.14 2003/12/12 12:52:53 oes
- * - Fixed usage info for non-unix platforms
- * - Fixed small cmdline parsing bug
- *
- * Revision 1.92.2.13 2003/11/27 19:20:27 oes
- * Diagnostics: Now preserve the returncode of pthread_create
- * in errno. Closes BR #775721. Thanks to Geoffrey Hausheer.
- *
- * Revision 1.92.2.12 2003/07/11 11:34:19 oes
- * No longer ignore SIGCHLD. Fixes bug #769381
- *
- * Revision 1.92.2.11 2003/05/14 12:32:02 oes
- * Close jarfile on graceful exit, remove stray line
- *
- * Revision 1.92.2.10 2003/05/08 15:13:46 oes
- * Cosmetics: Killed a warning, a typo and an allocation left at exit
- *
- * Revision 1.92.2.9 2003/04/03 15:08:42 oes
- * No longer rely on non-POSIX.1 extensions of getcwd().
- * Fixes bug #711001
- *
- * Revision 1.92.2.8 2003/03/31 13:12:32 oes
- * Replaced setenv() by posix-compliant putenv()
- * Thanks to Neil McCalden (nmcc AT users.sf.net).
- *
- * Revision 1.92.2.7 2003/03/17 16:48:59 oes
- * Added chroot ability, thanks to patch by Sviatoslav Sviridov
- *
- * Revision 1.92.2.6 2003/03/11 11:55:00 oes
- * Clean-up and extension of improvements for forked mode:
- * - Child's return code now consists of flags RC_FLAG_*
- * - Reporting toggle to parent now properly #ifdef'ed
- * - Children now report blocking to parent. This enables
- * statistics in forked mode
- *
- * Revision 1.92.2.5 2003/03/10 23:45:32 oes
- * Fixed bug #700381: Non-Threaded version now capable of being toggled.
- * Children now report having been toggled through _exit(17), parents
- * watch for that code and toggle themselves if found.
- *
- * Revision 1.92.2.4 2003/03/07 03:41:04 david__schmidt
- * Wrapping all *_r functions (the non-_r versions of them) with
- * mutex semaphores for OSX. Hopefully this will take care of all
- * of those pesky crash reports.
- *
- * Revision 1.92.2.3 2003/02/28 12:53:06 oes
- * Fixed two mostly harmless mem leaks
- *
- * Revision 1.92.2.2 2002/11/20 14:37:47 oes
- * Fix: Head of global clients list now initialized to NULL
- *
- * Revision 1.92.2.1 2002/09/25 14:52:24 oes
- * Added basic support for OPTIONS and TRACE HTTP methods:
- * - New interceptor direct_response() added in chat().
- * - sed() moved to earlier in the process, so that the
- * Host: header is evaluated before actions and forwarding
- * are decided on.
- *
- * Revision 1.92 2002/05/08 16:00:46 oes
- * Chat's buffer handling:
- * - Fixed bug with unchecked out-of-mem conditions
- * while reading client request & server headers
- * - No longer predict if the buffer limit will be exceeded
- * in the next read -- check add_to_iob's new
- * return code. If buffer couldn't be extended
- * (policy or out-of-mem) while
- * - reading from client: abort
- * - reading server headers: send error page
- * - buffering server body for filter: flush,
- * and if that fails: send error page
- *
- * Revision 1.91 2002/04/08 20:35:58 swa
- * fixed JB spelling
- *
- * Revision 1.90 2002/04/02 14:57:28 oes
- * Made sending wafers independent of FEATURE_COOKIE_JAR
- *
- * Revision 1.89 2002/03/31 17:18:59 jongfoster
- * Win32 only: Enabling STRICT to fix a VC++ compile warning.
- *
- * Revision 1.88 2002/03/27 14:32:43 david__schmidt
- * More compiler warning message maintenance
- *
- * Revision 1.87 2002/03/26 22:29:54 swa
- * we have a new homepage!
- *
- * Revision 1.86 2002/03/25 17:04:55 david__schmidt
- * Workaround for closing the jarfile before load_config() comes around again
- *
- * Revision 1.85 2002/03/24 15:23:33 jongfoster
- * Name changes
- *
- * Revision 1.84 2002/03/24 13:25:43 swa
- * name change related issues
- *
- * Revision 1.83 2002/03/16 23:54:06 jongfoster
- * Adding graceful termination feature, to help look for memory leaks.
- * If you enable this (which, by design, has to be done by hand
- * editing config.h) and then go to http://i.j.b/die, then the program
- * will exit cleanly after the *next* request. It should free all the
- * memory that was used.
- *
- * Revision 1.82 2002/03/13 00:27:05 jongfoster
- * Killing warnings
- *
- * Revision 1.81 2002/03/12 01:42:50 oes
- * Introduced modular filters
- *
- * Revision 1.80 2002/03/11 22:07:05 david__schmidt
- * OS/2 port maintenance:
- * - Fixed EMX build - it had decayed a little
- * - Fixed inexplicable crash during FD_ZERO - must be due to a bad macro.
- * substituted a memset for now.
- *
- * Revision 1.79 2002/03/09 20:03:52 jongfoster
- * - Making various functions return int rather than size_t.
- * (Undoing a recent change). Since size_t is unsigned on
- * Windows, functions like read_socket that return -1 on
- * error cannot return a size_t.
- *
- * THIS WAS A MAJOR BUG - it caused frequent, unpredictable
- * crashes, and also frequently caused JB to jump to 100%
- * CPU and stay there. (Because it thought it had just
- * read ((unsigned)-1) == 4Gb of data...)
- *
- * - The signature of write_socket has changed, it now simply
- * returns success=0/failure=nonzero.
- *
- * - Trying to get rid of a few warnings --with-debug on
- * Windows, I've introduced a new type "jb_socket". This is
- * used for the socket file descriptors. On Windows, this
- * is SOCKET (a typedef for unsigned). Everywhere else, it's
- * an int. The error value can't be -1 any more, so it's
- * now JB_INVALID_SOCKET (which is -1 on UNIX, and in
- * Windows it maps to the #define INVALID_SOCKET.)
- *
- * - The signature of bind_port has changed.
- *
- * Revision 1.78 2002/03/08 21:35:04 oes
- * Added optional group supplement to --user option. Will now use default group of user if no group given
- *
- * Revision 1.77 2002/03/07 03:52:06 oes
- * - Fixed compiler warnings etc
- * - Improved handling of failed DNS lookups
- *
- * Revision 1.76 2002/03/06 22:54:35 jongfoster
- * Automated function-comment nitpicking.
- *
- * Revision 1.75 2002/03/06 10:02:19 oes
- * Fixed stupid bug when --user was not given
- *
- * Revision 1.74 2002/03/06 00:49:31 jongfoster
- * Fixing warning on Windows
- * Making #ifdefs that refer to the same variable consistently
- * use #ifdef unix rather than mixing #ifdef unix & #ifndef OS2
- *
- * Revision 1.73 2002/03/05 23:57:30 hal9
- * Stray character 's' on line 1618 was breaking build.
- *
- * Revision 1.72 2002/03/05 21:33:45 david__schmidt
- * - Re-enable OS/2 building after new parms were added
- * - Fix false out of memory report when resolving CGI templates when no IP
- * address is available of failed attempt (a la no such domain)
- *
- * Revision 1.71 2002/03/05 18:13:56 oes
- * Added --user option
- *
- * Revision 1.70 2002/03/05 04:52:42 oes
- * Deleted non-errlog debugging code
- *
- * Revision 1.69 2002/03/04 23:50:00 jongfoster
- * Splitting off bind_port() call into bind_port_helper(), with
- * improved logging.
- *
- * Revision 1.68 2002/03/04 20:17:32 oes
- * Fixed usage info
- *
- * Revision 1.67 2002/03/04 18:18:57 oes
- * - Removed _DEBUG mode
- * - Cleand up cmdline parsing
- * - Introduced --no-daemon, --pidfile options
- * - Cleaned up signal handling:
- * - Terminate cleanly on INT, TERM and ABRT
- * - Schedule logfile for re-opening on HUP
- * - Ignore CHLD and PIPE
- * - Leave the rest with their default handlers
- * - Uniform handler registration
- * - Added usage() function
- * - Played styleguide police
- *
- * Revision 1.66 2002/03/03 15:06:55 oes
- * Re-enabled automatic config reloading
- *
- * Revision 1.65 2002/03/03 14:49:11 oes
- * Fixed CLF logging: Now uses client's original HTTP request
- *
- * Revision 1.64 2002/03/03 09:18:03 joergs
- * Made jumbjuster work on AmigaOS again.
- *
- * Revision 1.63 2002/03/02 04:14:50 david__schmidt
- * Clean up a little CRLF unpleasantness that suddenly appeared
- *
- * Revision 1.62 2002/02/20 23:17:23 jongfoster
- * Detecting some out-of memory conditions and exiting with a log message.
- *
- * Revision 1.61 2002/01/17 21:01:52 jongfoster
- * Moving all our URL and URL pattern parsing code to urlmatch.c.
- *
- * Revision 1.60 2001/12/30 14:07:32 steudten
- * - Add signal handling (unix)
- * - Add SIGHUP handler (unix)
- * - Add creation of pidfile (unix)
- * - Add action 'top' in rc file (RH)
- * - Add entry 'SIGNALS' to manpage
- * - Add exit message to logfile (unix)
- *
- * Revision 1.59 2001/12/13 14:07:18 oes
- * Fixed Bug: 503 error page now sent OK
- *
- * Revision 1.58 2001/11/30 23:37:24 jongfoster
- * Renaming the Win32 config file to config.txt - this is almost the
- * same as the corresponding UNIX name "config"
- *
- * Revision 1.57 2001/11/16 00:47:43 jongfoster
- * Changing the tty-disconnection code to use setsid().
- *
- * Revision 1.56 2001/11/13 20:20:54 jongfoster
- * Tabs->spaces, fixing a bug with missing {} around an if()
- *
- * Revision 1.55 2001/11/13 20:14:53 jongfoster
- * Patch for FreeBSD setpgrp() as suggested by Alexander Lazic
- *
- * Revision 1.54 2001/11/07 00:03:14 steudten
- * Give reliable return value if an error
- * occurs not just 0 with new daemon mode.
- *
- * Revision 1.53 2001/11/05 21:41:43 steudten
- * Add changes to be a real daemon just for unix os.
- * (change cwd to /, detach from controlling tty, set
- * process group and session leader to the own process.
- * Add DBG() Macro.
- * Add some fatal-error log message for failed malloc().
- * Add '-d' if compiled with 'configure --with-debug' to
- * enable debug output.
- *
- * Revision 1.52 2001/10/26 20:11:20 jongfoster
- * Fixing type mismatch
- *
- * Revision 1.51 2001/10/26 17:38:28 oes
- * Cosmetics
- *
- * Revision 1.50 2001/10/25 03:40:48 david__schmidt
- * Change in porting tactics: OS/2's EMX porting layer doesn't allow multiple
- * threads to call select() simultaneously. So, it's time to do a real, live,
- * native OS/2 port. See defines for __EMX__ (the porting layer) vs. __OS2__
- * (native). Both versions will work, but using __OS2__ offers multi-threading.
- *
- * Revision 1.49 2001/10/23 21:41:35 jongfoster
- * Added call to initialize the (statically-allocated of course)
- * "out of memory" CGI response.
- *
- * Revision 1.48 2001/10/10 19:56:46 jongfoster
- * Moving some code that wasn't cookie-related out of an #ifdef
- * FEATURE_COOKIE_JAR
- *
- * Revision 1.47 2001/10/10 16:44:36 oes
- * Added CONNECT destination port limitation check
- *
- * Revision 1.46 2001/10/08 15:17:41 oes
- * Re-enabled SSL forwarding
- *
- * Revision 1.45 2001/10/07 15:42:11 oes
- * Replaced 6 boolean members of csp with one bitmap (csp->flags)
- *
- * Moved downgrading of the HTTP version from parse_http_request to
- * chat(), since we can't decide if it is necessary before we have
- * determined the actions for the URL. The HTTP command is now
- * *always* re-built so the repairs need no longer be special-cased.
- *
- * filter_popups now gets a csp pointer so it can raise the new
- * CSP_FLAG_MODIFIED flag.
- *
- * Bugfix
- *
- * Added configurable size limit for the IOB. If the IOB grows so
- * large that the next read would exceed the limit, the header
- * is generated, and the header & unfiltered buffer are flushed
- * to the client. Chat then continues in non-buffering,
- * non-filtering body mode.
- *
- * Revision 1.44 2001/10/02 18:13:57 oes
- * Ooops
- *
- * Revision 1.43 2001/10/02 15:32:13 oes
- * Moved generation of hdr
- *
- * Revision 1.42 2001/09/21 23:02:02 david__schmidt
- * Cleaning up 2 compiler warnings on OS/2.
- *
- * Revision 1.41 2001/09/16 17:05:14 jongfoster
- * Removing unused #include showarg.h
- *
- * Revision 1.40 2001/09/16 15:41:45 jongfoster
- * Fixing signed/unsigned comparison warning.
- *
- * Revision 1.39 2001/09/16 13:21:27 jongfoster
- * Changes to use new list functions.
- *
- * Revision 1.38 2001/09/16 13:01:46 jongfoster
- * Removing redundant function call that zeroed zalloc()'d memory.
- *
- * Revision 1.37 2001/09/10 11:12:24 oes
- * Deleted unused variable
- *
- * Revision 1.36 2001/09/10 10:56:15 oes
- * Silenced compiler warnings
- *
- * Revision 1.35 2001/07/31 14:44:22 oes
- * Deleted unused size parameter from filter_popups()
- *
- * Revision 1.34 2001/07/30 22:08:36 jongfoster
- * Tidying up #defines:
- * - All feature #defines are now of the form FEATURE_xxx
- * - Permanently turned off WIN_GUI_EDIT
- * - Permanently turned on WEBDAV and SPLIT_PROXY_ARGS
- *
- * Revision 1.33 2001/07/29 19:32:00 jongfoster
- * Renaming _main() [mingw32 only] to real_main(), for ANSI compliance.
- *
- * Revision 1.32 2001/07/29 18:47:05 jongfoster
- * Adding missing #include "loadcfg.h"
- *
- * Revision 1.31 2001/07/29 12:17:48 oes
- * Applied pthread fix by Paul Lieverse
- *
- * Revision 1.30 2001/07/25 22:57:13 jongfoster
- * __BEOS__ no longer overrides FEATURE_PTHREAD.
- * This is because FEATURE_PTHREAD will soon be widely used, so I
- * want to keep it simple.
- *
- * Revision 1.29 2001/07/24 12:47:06 oes
- * Applied BeOS support update by Eugenia
- *
- * Revision 1.28 2001/07/23 13:26:12 oes
- * Fixed bug in popup-killing for the first read that caused binary garbage to be sent between headers and body
- *
- * Revision 1.27 2001/07/19 19:09:47 haroon
- * - Added code to take care of the situation where while processing the first
- * server response (which includes the server header), after finding the end
- * of the headers we were not looking past the end of the headers for
- * content modification. I enabled it for filter_popups.
- * Someone else should look to see if other similar operations should be
- * done to the discarded portion of the buffer.
- *
- * Note 2001/07/20: No, the other content modification mechanisms will process
- * the whole iob later anyway. --oes
- *
- * Revision 1.26 2001/07/18 12:31:36 oes
- * cosmetics
- *
- * Revision 1.25 2001/07/15 19:43:49 jongfoster
- * Supports POSIX threads.
- * Also removed some unused #includes.
- *
- * Revision 1.24 2001/07/13 14:00:40 oes
- * - Generic content modification scheme:
- * Each feature has its own applicability flag that is set
- * from csp->action->flags.
- * Replaced the "filtering" int flag , by a function pointer
- * "content_filter" to the function that will do the content
- * modification. If it is != NULL, the document will be buffered
- * and processed through *content_filter, which must set
- * csp->content_length and return a modified copy of the body
- * or return NULL (on failiure).
- * - Changed csp->is_text to the more generic bitmap csp->content_type
- * which can currently take the valued CT_TEXT or CT_GIF
- * - Reformatting etc
- * - Removed all #ifdef PCRS
- *
- * Revision 1.23 2001/07/02 02:28:25 iwanttokeepanon
- * Added "#ifdef ACL_FILES" conditional compilation to line 1291 to exclude
- * the `block_acl' call. This prevents a compilation error when the user
- * does not wish to use the "ACL" feature.
- *
- * Revision 1.22 2001/06/29 21:45:41 oes
- * Indentation, CRLF->LF, Tab-> Space
- *
- * Revision 1.21 2001/06/29 13:29:36 oes
- * - Cleaned up, improved comments
- * - Unified all possible interceptors (CGI,
- * block, trust, fast_redirect) in one
- * place, with one (CGI) answer generation
- * mechansim. Much clearer now.
- * - Removed the GIF image generation, which
- * is now done in filters.c:block_url()
- * - Made error conditions like domain lookup
- * failiure or (various) problems while talking
- * to the server use cgi.c:error_response()
- * instead of generating HTML/HTTP in chat() (yuck!)
- * - Removed logentry from cancelled commit
- *
- * Revision 1.20 2001/06/09 10:55:28 jongfoster
- * Changing BUFSIZ ==> BUFFER_SIZE
- *
- * Revision 1.19 2001/06/07 23:12:52 jongfoster
- * Replacing function pointer in struct gateway with a directly
- * called function forwarded_connect().
- * Replacing struct gateway with struct forward_spec
- *
- * Revision 1.18 2001/06/03 19:12:16 oes
- * introduced new cgi handling
- *
- * Revision 1.17 2001/06/01 20:07:23 jongfoster
- * Now uses action +image-blocker{} rather than config->tinygif
- *
- * Revision 1.16 2001/06/01 18:49:17 jongfoster
- * Replaced "list_share" with "list" - the tiny memory gain was not
- * worth the extra complexity.
- *
- * Revision 1.15 2001/05/31 21:24:47 jongfoster
- * Changed "permission" to "action" throughout.
- * Removed DEFAULT_USER_AGENT - it must now be specified manually.
- * Moved vanilla wafer check into chat(), since we must now
- * decide whether or not to add it based on the URL.
- *
- * Revision 1.14 2001/05/29 20:14:01 joergs
- * AmigaOS bugfix: PCRS needs a lot of stack, stacksize for child threads
- * increased.
- *
- * Revision 1.13 2001/05/29 09:50:24 jongfoster
- * Unified blocklist/imagelist/permissionslist.
- * File format is still under discussion, but the internal changes
- * are (mostly) done.
- *
- * Also modified interceptor behaviour:
- * - We now intercept all URLs beginning with one of the following
- * prefixes (and *only* these prefixes):
- * * http://i.j.b/
- * * http://ijbswa.sf.net/config/
- * * http://ijbswa.sourceforge.net/config/
- * - New interceptors "home page" - go to http://i.j.b/ to see it.
- * - Internal changes so that intercepted and fast redirect pages
- * are not replaced with an image.
- * - Interceptors now have the option to send a binary page direct
- * to the client. (i.e. ijb-send-banner uses this)
- * - Implemented show-url-info interceptor. (Which is why I needed
- * the above interceptors changes - a typical URL is
- * "http://i.j.b/show-url-info?url=www.somesite.com/banner.gif".
- * The previous mechanism would not have intercepted that, and
- * if it had been intercepted then it then it would have replaced
- * it with an image.)
- *
- * Revision 1.12 2001/05/27 22:17:04 oes
- *
- * - re_process_buffer no longer writes the modified buffer
- * to the client, which was very ugly. It now returns the
- * buffer, which it is then written by chat.
- *
- * - content_length now adjusts the Content-Length: header
- * for modified documents rather than crunch()ing it.
- * (Length info in csp->content_length, which is 0 for
- * unmodified documents)
- *
- * - For this to work, sed() is called twice when filtering.
- *
- * Revision 1.11 2001/05/26 17:27:53 jongfoster
- * Added support for CLF and fixed LOG_LEVEL_LOG.
- * Also did CRLF->LF fix of my previous patch.
- *
- * Revision 1.10 2001/05/26 15:26:15 jongfoster
- * ACL feature now provides more security by immediately dropping
- * connections from untrusted hosts.
- *
- * Revision 1.9 2001/05/26 00:28:36 jongfoster
- * Automatic reloading of config file.
- * Removed obsolete SIGHUP support (Unix) and Reload menu option (Win32).
- * Most of the global variables have been moved to a new
- * struct configuration_spec, accessed through csp->config->globalname
- * Most of the globals remaining are used by the Win32 GUI.
- *
- * Revision 1.8 2001/05/25 22:43:18 jongfoster
- * Fixing minor memory leak and buffer overflow.
- *
- * Revision 1.7 2001/05/25 22:34:30 jongfoster
- * Hard tabs->Spaces
- *
- * Revision 1.6 2001/05/23 00:13:58 joergs
- * AmigaOS support fixed.
- *
- * Revision 1.5 2001/05/22 18:46:04 oes
- *
- * - Enabled filtering banners by size rather than URL
- * by adding patterns that replace all standard banner
- * sizes with the "Junkbuster" gif to the re_filterfile
- *
- * - Enabled filtering WebBugs by providing a pattern
- * which kills all 1x1 images
- *
- * - Added support for PCRE_UNGREEDY behaviour to pcrs,
- * which is selected by the (nonstandard and therefore
- * capital) letter 'U' in the option string.
- * It causes the quantifiers to be ungreedy by default.
- * Appending a ? turns back to greedy (!).
- *
- * - Added a new interceptor ijb-send-banner, which
- * sends back the "Junkbuster" gif. Without imagelist or
- * MSIE detection support, or if tinygif = 1, or the
- * URL isn't recognized as an imageurl, a lame HTML
- * explanation is sent instead.
- *
- * - Added new feature, which permits blocking remote
- * script redirects and firing back a local redirect
- * to the browser.
- * The feature is conditionally compiled, i.e. it
- * can be disabled with --disable-fast-redirects,
- * plus it must be activated by a "fast-redirects"
- * line in the config file, has its own log level
- * and of course wants to be displayed by show-proxy-args
- * Note: Boy, all the #ifdefs in 1001 locations and
- * all the fumbling with configure.in and acconfig.h
- * were *way* more work than the feature itself :-(
- *
- * - Because a generic redirect template was needed for
- * this, tinygif = 3 now uses the same.
- *
- * - Moved GIFs, and other static HTTP response templates
- * to project.h
- *
- * - Some minor fixes
- *
- * - Removed some >400 CRs again (Jon, you really worked
- * a lot! ;-)
- *
- * Revision 1.4 2001/05/21 19:34:01 jongfoster
- * Made failure to bind() a fatal error.
- *
- * Revision 1.3 2001/05/20 01:21:20 jongfoster
- * Version 2.9.4 checkin.
- * - Merged popupfile and cookiefile, and added control over PCRS
- * filtering, in new "permissionsfile".
- * - Implemented LOG_LEVEL_FATAL, so that if there is a configuration
- * file error you now get a message box (in the Win32 GUI) rather
- * than the program exiting with no explanation.
- * - Made killpopup use the PCRS MIME-type checking and HTTP-header
- * skipping.
- * - Removed tabs from "config"
- * - Moved duplicated url parsing code in "loaders.c" to a new funcition.
- * - Bumped up version number.
- *
- * Revision 1.2 2001/05/17 22:34:44 oes
- * - Added hint on GIF char array generation to jcc.c
- * - Cleaned CRLF's from the sources and related files
- * - Repaired logging for REF and FRC
- *
- * Revision 1.1.1.1 2001/05/15 13:58:56 oes
- * Initial import of version 2.9.3 source tree
- *
- *
*********************************************************************/
-\f
+
#include "config.h"
const char jcc_h_rcs[] = JCC_H_VERSION;
const char project_h_rcs[] = PROJECT_H_VERSION;
-int no_daemon = 0;
-struct client_state clients[1];
+int daemon_mode = 1;
+struct client_states clients[1];
struct file_list files[1];
#ifdef FEATURE_STATISTICS
static void usage(const char *myname);
#endif
static void initialize_mutexes(void);
-static jb_socket bind_port_helper(struct configuration_spec *config);
+static jb_socket bind_port_helper(const char *haddr, int hport);
+static void bind_ports_helper(struct configuration_spec *config, jb_socket sockets[]);
+static void close_ports_helper(jb_socket sockets[]);
static void listen_loop(void);
#ifdef AMIGA
/* HTTP snipplets. */
static const char CSUCCEED[] =
- "HTTP/1.0 200 Connection established\r\n"
+ "HTTP/1.1 200 Connection established\r\n"
"Proxy-Agent: Privoxy/" VERSION "\r\n\r\n";
static const char CHEADER[] =
- "HTTP/1.0 400 Invalid header received from client\r\n"
+ "HTTP/1.1 400 Invalid header received from client\r\n"
"Proxy-Agent: Privoxy " VERSION "\r\n"
"Content-Type: text/plain\r\n"
"Connection: close\r\n\r\n"
"Invalid header received from client.\r\n";
static const char FTP_RESPONSE[] =
- "HTTP/1.0 400 Invalid request received from client\r\n"
+ "HTTP/1.1 400 Invalid request received from client\r\n"
"Content-Type: text/plain\r\n"
"Connection: close\r\n\r\n"
"Invalid request. Privoxy doesn't support FTP.\r\n";
static const char GOPHER_RESPONSE[] =
- "HTTP/1.0 400 Invalid request received from client\r\n"
+ "HTTP/1.1 400 Invalid request received from client\r\n"
"Content-Type: text/plain\r\n"
"Connection: close\r\n\r\n"
"Invalid request. Privoxy doesn't support gopher.\r\n";
/* XXX: should be a template */
static const char MISSING_DESTINATION_RESPONSE[] =
- "HTTP/1.0 400 Bad request received from client\r\n"
+ "HTTP/1.1 400 Bad request received from client\r\n"
"Proxy-Agent: Privoxy " VERSION "\r\n"
"Content-Type: text/plain\r\n"
"Connection: close\r\n\r\n"
"Bad request. Privoxy was unable to extract the destination.\r\n";
/* XXX: should be a template */
-static const char NO_SERVER_DATA_RESPONSE[] =
- "HTTP/1.0 502 Server or forwarder response empty\r\n"
+static const char INVALID_SERVER_HEADERS_RESPONSE[] =
+ "HTTP/1.1 502 Server or forwarder response invalid\r\n"
"Proxy-Agent: Privoxy " VERSION "\r\n"
"Content-Type: text/plain\r\n"
"Connection: close\r\n\r\n"
- "Empty server or forwarder response.\r\n"
- "The connection has been closed but Privoxy didn't receive any data.\r\n";
+ "Bad response. The server or forwarder response doesn't look like HTTP.\r\n";
/* XXX: should be a template */
-static const char INVALID_SERVER_HEADERS_RESPONSE[] =
- "HTTP/1.0 502 Server or forwarder response invalid\r\n"
+static const char MESSED_UP_REQUEST_RESPONSE[] =
+ "HTTP/1.1 400 Malformed request after rewriting\r\n"
"Proxy-Agent: Privoxy " VERSION "\r\n"
"Content-Type: text/plain\r\n"
"Connection: close\r\n\r\n"
- "Bad response. The server or forwarder response doesn't look like HTTP.\r\n";
+ "Bad request. Messed up with header filters.\r\n";
-#if 0
-/* XXX: should be a template */
-static const char NULL_BYTE_RESPONSE[] =
- "HTTP/1.0 400 Bad request received from client\r\n"
+static const char TOO_MANY_CONNECTIONS_RESPONSE[] =
+ "HTTP/1.1 503 Too many open connections\r\n"
"Proxy-Agent: Privoxy " VERSION "\r\n"
"Content-Type: text/plain\r\n"
"Connection: close\r\n\r\n"
- "Bad request. Null byte(s) before end of request.\r\n";
-#endif
+ "Maximum number of open connections reached.\r\n";
-/* XXX: should be a template */
-static const char MESSED_UP_REQUEST_RESPONSE[] =
- "HTTP/1.0 400 Malformed request after rewriting\r\n"
+static const char CLIENT_CONNECTION_TIMEOUT_RESPONSE[] =
+ "HTTP/1.1 504 Connection timeout\r\n"
"Proxy-Agent: Privoxy " VERSION "\r\n"
"Content-Type: text/plain\r\n"
"Connection: close\r\n\r\n"
- "Bad request. Messed up with header filters.\r\n";
+ "The connection timed out because the client request didn't arrive in time.\r\n";
/* A function to crunch a response */
typedef struct http_response *(*crunch_func_ptr)(struct client_state *);
#if !defined(_WIN32) && !defined(__OS2__) && !defined(AMIGA)
/*********************************************************************
*
- * Function : sig_handler
+ * Function : sig_handler
*
* Description : Signal handler for different signals.
* Exit gracefully on TERM and INT
* Parameters :
* 1 : the_signal = the signal cause this function to call
*
- * Returns : -
+ * Returns : -
*
*********************************************************************/
static void sig_handler(int the_signal)
case SIGINT:
log_error(LOG_LEVEL_INFO, "exiting by signal %d .. bye", the_signal);
#if defined(unix)
- if(pidfile)
+ if (pidfile)
{
unlink(pidfile);
}
#if defined(unix)
received_hup_signal = 1;
#endif
- break;
+ break;
default:
- /*
+ /*
* We shouldn't be here, unless we catch signals
* in main() that we can't handle here!
*/
}
else if (JB_ERR_OK == get_destination_from_headers(headers, csp->http))
{
+#ifndef FEATURE_EXTENDED_HOST_PATTERNS
/* Split the domain we just got for pattern matching */
init_domain_components(csp->http);
+#endif
return JB_ERR_OK;
}
log_error(LOG_LEVEL_HEADER, "Continue hack in da house.");
continue_hack_in_da_house = 1;
}
- else if (*header == '\0')
+ else if (*header == '\0')
{
/*
* If the header is empty, but the Continue hack
return "Internal error while searching for crunch reason";
}
- switch (rsp->reason)
+ switch (rsp->crunch_reason)
{
- case RSP_REASON_UNSUPPORTED:
+ case UNSUPPORTED:
reason = "Unsupported HTTP feature";
break;
- case RSP_REASON_BLOCKED:
+ case BLOCKED:
reason = "Blocked";
break;
- case RSP_REASON_UNTRUSTED:
+ case UNTRUSTED:
reason = "Untrusted";
break;
- case RSP_REASON_REDIRECTED:
+ case REDIRECTED:
reason = "Redirected";
break;
- case RSP_REASON_CGI_CALL:
+ case CGI_CALL:
reason = "CGI Call";
break;
- case RSP_REASON_NO_SUCH_DOMAIN:
+ case NO_SUCH_DOMAIN:
reason = "DNS failure";
break;
- case RSP_REASON_FORWARDING_FAILED:
+ case FORWARDING_FAILED:
reason = "Forwarding failed";
break;
- case RSP_REASON_CONNECT_FAILED:
+ case CONNECT_FAILED:
reason = "Connection failure";
break;
- case RSP_REASON_OUT_OF_MEMORY:
+ case OUT_OF_MEMORY:
reason = "Out of memory (may mask other reasons)";
break;
+ case CONNECTION_TIMEOUT:
+ reason = "Connection timeout";
+ break;
+ case NO_SERVER_DATA:
+ reason = "No server data received";
+ break;
default:
reason = "No reason recorded";
break;
}
+/*********************************************************************
+ *
+ * Function : log_applied_actions
+ *
+ * Description : Logs the applied actions if LOG_LEVEL_ACTIONS is
+ * enabled.
+ *
+ * Parameters :
+ * 1 : actions = Current action spec to log
+ *
+ * Returns : Nothing.
+ *
+ *********************************************************************/
+static void log_applied_actions(const struct current_action_spec *actions)
+{
+ /*
+ * The conversion to text requires lots of memory allocations so
+ * we only do the conversion if the user is actually interested.
+ */
+ if (debug_level_is_enabled(LOG_LEVEL_ACTIONS))
+ {
+ char *actions_as_text = actions_to_line_of_text(actions);
+ log_error(LOG_LEVEL_ACTIONS, "%s", actions_as_text);
+ freez(actions_as_text);
+ }
+}
+
+
/*********************************************************************
*
* Function : send_crunch_response
if (rsp == NULL)
{
- /*
- * Not supposed to happen. If it does
- * anyway, treat it as an unknown error.
- */
- cgi_error_unknown(csp, rsp, RSP_REASON_INTERNAL_ERROR);
- /* return code doesn't matter */
- }
-
- if (rsp == NULL)
- {
- /* If rsp is still NULL, we have serious internal problems. */
- log_error(LOG_LEVEL_FATAL,
- "NULL response in send_crunch_response and cgi_error_unknown failed as well.");
+ log_error(LOG_LEVEL_FATAL, "NULL response in send_crunch_response.");
}
/*
* Extract the status code from the actual head
- * that was send to the client. It is the only
+ * that will be send to the client. It is the only
* way to get it right for all requests, including
* the fixed ones for out-of-memory problems.
*
status_code[2] = rsp->head[11];
status_code[3] = '\0';
+ /* Log that the request was crunched and why. */
+ log_applied_actions(csp->action);
+ log_error(LOG_LEVEL_CRUNCH, "%s: %s", crunch_reason(rsp), http->url);
+ log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" %s %u",
+ csp->ip_addr_str, http->ocmd, status_code, rsp->content_length);
+
/* Write the answer to the client */
if (write_socket(csp->cfd, rsp->head, rsp->head_length)
|| write_socket(csp->cfd, rsp->body, rsp->content_length))
{
/* There is nothing we can do about it. */
- log_error(LOG_LEVEL_ERROR, "write to: %s failed: %E", csp->http->host);
+ log_error(LOG_LEVEL_ERROR,
+ "Couldn't deliver the error message through client socket %d: %E",
+ csp->cfd);
}
- /* Log that the request was crunched and why. */
- log_error(LOG_LEVEL_GPC, "%s%s crunch! (%s)",
- http->hostport, http->path, crunch_reason(rsp));
- log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" %s %d",
- csp->ip_addr_str, http->ocmd, status_code, rsp->content_length);
-
/* Clean up and return */
if (cgi_error_memory() != rsp)
{
free_http_response(rsp);
- }
+ }
return;
}
-#if 0
-/*********************************************************************
- *
- * Function : request_contains_null_bytes
- *
- * Description : Checks for NULL bytes in the request and sends
- * an error message to the client if any were found.
- *
- * XXX: currently not used, see comment in chat().
- *
- * Parameters :
- * 1 : csp = Current client state (buffers, headers, etc...)
- * 2 : buf = Data from the client's request to check.
- * 3 : len = The data length.
- *
- * Returns : TRUE if the request contained one or more NULL bytes, or
- * FALSE otherwise.
- *
- *********************************************************************/
-static int request_contains_null_bytes(const struct client_state *csp, char *buf, int len)
-{
- size_t c_len; /* Request lenght when treated as C string */
-
- c_len = strlen(buf);
-
- if (c_len < len)
- {
- /*
- * Null byte(s) found. Log the request,
- * return an error response and hang up.
- */
- size_t tmp_len = c_len;
-
- do
- {
- /*
- * Replace NULL byte(s) with '°' characters
- * so the request can be logged as string.
- * XXX: Is there a better replacement character?
- */
- buf[tmp_len]='°';
- tmp_len += strlen(buf+tmp_len);
- } while (tmp_len < len);
-
- log_error(LOG_LEVEL_ERROR, "%s\'s request contains at least one NULL byte "
- "(length=%d, strlen=%d).", csp->ip_addr_str, len, c_len);
- log_error(LOG_LEVEL_HEADER,
- "Offending request data with NULL bytes turned into \'°\' characters: %s", buf);
-
- write_socket(csp->cfd, NULL_BYTE_RESPONSE, strlen(NULL_BYTE_RESPONSE));
-
- /* XXX: Log correct size */
- log_error(LOG_LEVEL_CLF, "%s - - [%T] \"Invalid request\" 400 0", csp->ip_addr_str);
-
- return TRUE;
- }
-
- return FALSE;
-}
-#endif
-
-
/*********************************************************************
*
* Function : crunch_response_triggered
/*
* If CGI request crunching is disabled,
* check the CGI dispatcher out of order to
- * prevent unintentional blocks or redirects.
+ * prevent unintentional blocks or redirects.
*/
if (!(csp->config->feature_flags & RUNTIME_FEATURE_CGI_CRUNCHING)
&& (NULL != (rsp = dispatch_cgi(csp))))
{
/* Deliver, log and free the interception response. */
send_crunch_response(csp, rsp);
+ csp->flags |= CSP_FLAG_CRUNCHED;
return TRUE;
}
{
/* Deliver, log and free the interception response. */
send_crunch_response(csp, rsp);
+ csp->flags |= CSP_FLAG_CRUNCHED;
#ifdef FEATURE_STATISTICS
if (c->flags & CF_COUNT_AS_REJECT)
{
* Downgrade http version from 1.1 to 1.0
* if +downgrade action applies.
*/
- if ( (csp->action->flags & ACTION_DOWNGRADE)
+ if ((csp->action->flags & ACTION_DOWNGRADE)
&& (!strcmpic(http->ver, "HTTP/1.1")))
{
freez(http->ver);
- http->ver = strdup("HTTP/1.0");
-
- if (http->ver == NULL)
- {
- log_error(LOG_LEVEL_FATAL, "Out of memory downgrading HTTP version");
- }
+ http->ver = strdup_or_die("HTTP/1.0");
}
/*
log_error(LOG_LEVEL_INFO, "Rewrite detected: %s", csp->headers->first->str);
free_http_request(http);
- err = parse_http_request(csp->headers->first->str, http, csp);
+ err = parse_http_request(csp->headers->first->str, http);
if (JB_ERR_OK != err)
{
log_error(LOG_LEVEL_ERROR, "Couldn't parse rewritten request: %s.",
else
{
/* XXX: ocmd is a misleading name */
- http->ocmd = strdup(http->cmd);
- if (http->ocmd == NULL)
- {
- log_error(LOG_LEVEL_FATAL,
- "Out of memory copying rewritten HTTP request line");
- }
+ http->ocmd = strdup_or_die(http->cmd);
}
return err;
* FALSE otherwise.
*
*********************************************************************/
-static int server_response_is_complete(struct client_state *csp, size_t content_length)
+static int server_response_is_complete(struct client_state *csp,
+ unsigned long long content_length)
{
- int content_length_known = (csp->flags & CSP_FLAG_CONTENT_LENGTH_SET);
+ int content_length_known = !!(csp->flags & CSP_FLAG_CONTENT_LENGTH_SET);
if (!strcmpic(csp->http->gpc, "HEAD"))
{
content_length_known = TRUE;
}
- if (csp->http->status == 304)
+ if (csp->http->status == 204 || csp->http->status == 304)
{
/*
* Expect no body. XXX: incomplete "list" of status codes?
return (content_length_known && ((0 == csp->expected_content_length)
|| (csp->expected_content_length <= content_length)));
}
+
+
+#ifdef FEATURE_CONNECTION_SHARING
+/*********************************************************************
+ *
+ * Function : wait_for_alive_connections
+ *
+ * Description : Waits for alive connections to timeout.
+ *
+ * Parameters : N/A
+ *
+ * Returns : N/A
+ *
+ *********************************************************************/
+static void wait_for_alive_connections(void)
+{
+ int connections_alive = close_unusable_connections();
+
+ while (0 < connections_alive)
+ {
+ log_error(LOG_LEVEL_CONNECT,
+ "Waiting for %d connections to timeout.",
+ connections_alive);
+ sleep(60);
+ connections_alive = close_unusable_connections();
+ }
+
+ log_error(LOG_LEVEL_CONNECT, "No connections to wait for left.");
+
+}
+#endif /* def FEATURE_CONNECTION_SHARING */
+
+
+/*********************************************************************
+ *
+ * Function : save_connection_destination
+ *
+ * Description : Remembers a connection for reuse later on.
+ *
+ * Parameters :
+ * 1 : sfd = Open socket to remember.
+ * 2 : http = The destination for the connection.
+ * 3 : fwd = The forwarder settings used.
+ * 3 : server_connection = storage.
+ *
+ * Returns : void
+ *
+ *********************************************************************/
+void save_connection_destination(jb_socket sfd,
+ const struct http_request *http,
+ const struct forward_spec *fwd,
+ struct reusable_connection *server_connection)
+{
+ assert(sfd != JB_INVALID_SOCKET);
+ assert(NULL != http->host);
+
+ server_connection->sfd = sfd;
+ server_connection->host = strdup_or_die(http->host);
+ server_connection->port = http->port;
+
+ assert(NULL != fwd);
+ assert(server_connection->gateway_host == NULL);
+ assert(server_connection->gateway_port == 0);
+ assert(server_connection->forwarder_type == 0);
+ assert(server_connection->forward_host == NULL);
+ assert(server_connection->forward_port == 0);
+
+ server_connection->forwarder_type = fwd->type;
+ if (NULL != fwd->gateway_host)
+ {
+ server_connection->gateway_host = strdup_or_die(fwd->gateway_host);
+ }
+ else
+ {
+ server_connection->gateway_host = NULL;
+ }
+ server_connection->gateway_port = fwd->gateway_port;
+
+ if (NULL != fwd->forward_host)
+ {
+ server_connection->forward_host = strdup_or_die(fwd->forward_host);
+ }
+ else
+ {
+ server_connection->forward_host = NULL;
+ }
+ server_connection->forward_port = fwd->forward_port;
+}
+
+
+/*********************************************************************
+ *
+ * Function : verify_request_length
+ *
+ * Description : Checks if we already got the whole client requests
+ * and sets CSP_FLAG_CLIENT_REQUEST_COMPLETELY_READ if
+ * we do.
+ *
+ * Data that doesn't belong to the current request is
+ * thrown away to let the client retry on a clean socket.
+ *
+ * XXX: This is a hack until we can deal with multiple
+ * pipelined requests at the same time.
+ *
+ *
+ * Parameters :
+ * 1 : csp = Current client state (buffers, headers, etc...)
+ *
+ * Returns : void
+ *
+ *********************************************************************/
+static void verify_request_length(struct client_state *csp)
+{
+ unsigned long long buffered_request_bytes =
+ (unsigned long long)(csp->iob->eod - csp->iob->cur);
+
+ if ((csp->expected_client_content_length != 0)
+ && (buffered_request_bytes != 0))
+ {
+ if (csp->expected_client_content_length >= buffered_request_bytes)
+ {
+ csp->expected_client_content_length -= buffered_request_bytes;
+ log_error(LOG_LEVEL_CONNECT, "Reduced expected bytes to %llu "
+ "to account for the %llu ones we already got.",
+ csp->expected_client_content_length, buffered_request_bytes);
+ }
+ else
+ {
+ assert(csp->iob->eod > csp->iob->cur + csp->expected_client_content_length);
+ csp->iob->eod = csp->iob->cur + csp->expected_client_content_length;
+ log_error(LOG_LEVEL_CONNECT, "Reducing expected bytes to 0. "
+ "Marking the server socket tainted after throwing %llu bytes away.",
+ buffered_request_bytes - csp->expected_client_content_length);
+ csp->expected_client_content_length = 0;
+ csp->flags |= CSP_FLAG_SERVER_SOCKET_TAINTED;
+ }
+
+ if (csp->expected_client_content_length == 0)
+ {
+ csp->flags |= CSP_FLAG_CLIENT_REQUEST_COMPLETELY_READ;
+ }
+ }
+
+ if (!(csp->flags & CSP_FLAG_CLIENT_REQUEST_COMPLETELY_READ)
+ && ((csp->iob->cur[0] != '\0') || (csp->expected_client_content_length != 0)))
+ {
+ csp->flags |= CSP_FLAG_SERVER_SOCKET_TAINTED;
+ if (strcmpic(csp->http->gpc, "GET")
+ && strcmpic(csp->http->gpc, "HEAD")
+ && strcmpic(csp->http->gpc, "TRACE")
+ && strcmpic(csp->http->gpc, "OPTIONS")
+ && strcmpic(csp->http->gpc, "DELETE"))
+ {
+ /* XXX: this is an incomplete hack */
+ csp->flags &= ~CSP_FLAG_CLIENT_REQUEST_COMPLETELY_READ;
+ log_error(LOG_LEVEL_CONNECT,
+ "There might be a request body. The connection will not be kept alive.");
+ }
+ else
+ {
+ /* XXX: and so is this */
+ csp->flags |= CSP_FLAG_CLIENT_REQUEST_COMPLETELY_READ;
+ log_error(LOG_LEVEL_CONNECT,
+ "Possible pipeline attempt detected. The connection will not "
+ "be kept alive and we will only serve the first request.");
+ /* Nuke the pipelined requests from orbit, just to be sure. */
+ csp->iob->buf[0] = '\0';
+ csp->iob->eod = csp->iob->cur = csp->iob->buf;
+ }
+ }
+ else
+ {
+ csp->flags |= CSP_FLAG_CLIENT_REQUEST_COMPLETELY_READ;
+ log_error(LOG_LEVEL_CONNECT, "Complete client request received.");
+ }
+}
#endif /* FEATURE_CONNECTION_KEEP_ALIVE */
+
/*********************************************************************
*
* Function : mark_server_socket_tainted
*********************************************************************/
static void mark_server_socket_tainted(struct client_state *csp)
{
- if ((csp->flags & CSP_FLAG_SERVER_CONNECTION_KEEP_ALIVE))
+ /*
+ * For consistency we always mark the server socket
+ * tainted, however, to reduce the log noise we only
+ * emit a log message if the server socket could have
+ * actually been reused.
+ */
+ if ((csp->flags & CSP_FLAG_SERVER_CONNECTION_KEEP_ALIVE)
+ && !(csp->flags |= CSP_FLAG_SERVER_SOCKET_TAINTED))
{
- log_error(LOG_LEVEL_CONNECT, "Unsetting keep-alive flag.");
- csp->flags &= ~CSP_FLAG_SERVER_CONNECTION_KEEP_ALIVE;
+ log_error(LOG_LEVEL_CONNECT,
+ "Marking the server socket %d tainted.",
+ csp->server_connection.sfd);
}
+ csp->flags |= CSP_FLAG_SERVER_SOCKET_TAINTED;
}
/*********************************************************************
do
{
+ if (!data_is_available(csp->cfd, csp->config->socket_timeout))
+ {
+ if (socket_is_still_alive(csp->cfd))
+ {
+ log_error(LOG_LEVEL_CONNECT,
+ "No request line on socket %d received in time. Timeout: %d.",
+ csp->cfd, csp->config->socket_timeout);
+ write_socket(csp->cfd, CLIENT_CONNECTION_TIMEOUT_RESPONSE,
+ strlen(CLIENT_CONNECTION_TIMEOUT_RESPONSE));
+ }
+ else
+ {
+ log_error(LOG_LEVEL_CONNECT,
+ "The client side of the connection on socket %d got "
+ "closed without sending a complete request line.", csp->cfd);
+ }
+ return NULL;
+ }
+
len = read_socket(csp->cfd, buf, sizeof(buf) - 1);
if (len <= 0) return NULL;
* Description : Read the client's request (more precisely the
* client headers) and answer it if necessary.
*
- * Note that since we're not using select() we could get
- * blocked here if a client connected, then didn't say
- * anything!
- *
* Parameters :
* 1 : csp = Current client state (buffers, headers, etc...)
*
memset(buf, 0, sizeof(buf));
req = get_request_line(csp);
+ if (req == NULL)
+ {
+ mark_server_socket_tainted(csp);
+ return JB_ERR_PARSE;
+ }
+ assert(*req != '\0');
- if ((NULL != req) && ('\0' != *req))
+ if (client_protocol_is_unsupported(csp, req))
{
- /* Request received. Validate and parse it. */
-
- /* Does the request line look invalid? */
- if (client_protocol_is_unsupported(csp, req))
- {
- /*
- * Yes. The request has already been
- * answered with a error response, the buffers
- * were freed and we're done with chatting.
- */
- return JB_ERR_PARSE;
- }
+ return JB_ERR_PARSE;
+ }
#ifdef FEATURE_FORCE_LOAD
- /*
- * If this request contains the FORCE_PREFIX and blocks
- * aren't enforced, get rid of it and set the force flag.
- */
- if (strstr(req, FORCE_PREFIX))
+ /*
+ * If this request contains the FORCE_PREFIX and blocks
+ * aren't enforced, get rid of it and set the force flag.
+ */
+ if (strstr(req, FORCE_PREFIX))
+ {
+ if (csp->config->feature_flags & RUNTIME_FEATURE_ENFORCE_BLOCKS)
{
- if (csp->config->feature_flags & RUNTIME_FEATURE_ENFORCE_BLOCKS)
- {
- log_error(LOG_LEVEL_FORCE,
- "Ignored force prefix in request: \"%s\".", req);
- }
- else
- {
- strclean(req, FORCE_PREFIX);
- log_error(LOG_LEVEL_FORCE, "Enforcing request: \"%s\".", req);
- csp->flags |= CSP_FLAG_FORCED;
- }
+ log_error(LOG_LEVEL_FORCE,
+ "Ignored force prefix in request: \"%s\".", req);
}
-#endif /* def FEATURE_FORCE_LOAD */
-
- err = parse_http_request(req, http, csp);
- if (JB_ERR_OK != err)
+ else
{
- log_error(LOG_LEVEL_ERROR, "Couldn't parse request: %s.", jb_err_to_string(err));
+ strclean(req, FORCE_PREFIX);
+ log_error(LOG_LEVEL_FORCE, "Enforcing request: \"%s\".", req);
+ csp->flags |= CSP_FLAG_FORCED;
}
-
- freez(req);
}
+#endif /* def FEATURE_FORCE_LOAD */
- if (http->cmd == NULL)
+ err = parse_http_request(req, http);
+ freez(req);
+ if (JB_ERR_OK != err)
{
write_socket(csp->cfd, CHEADER, strlen(CHEADER));
/* XXX: Use correct size */
log_error(LOG_LEVEL_CLF, "%s - - [%T] \"Invalid request\" 400 0", csp->ip_addr_str);
- log_error(LOG_LEVEL_ERROR, "Invalid header received from %s.", csp->ip_addr_str);
+ log_error(LOG_LEVEL_ERROR,
+ "Couldn't parse request line received from %s: %s",
+ csp->ip_addr_str, jb_err_to_string(err));
free_http_request(http);
return JB_ERR_PARSE;
* We didn't receive a complete header
* line yet, get the rest of it.
*/
+ if (!data_is_available(csp->cfd, csp->config->socket_timeout))
+ {
+ log_error(LOG_LEVEL_ERROR,
+ "Stopped grabbing the client headers.");
+ destroy_list(headers);
+ return JB_ERR_PARSE;
+ }
+
len = read_socket(csp->cfd, buf, sizeof(buf) - 1);
if (len <= 0)
{
destroy_list(headers);
return JB_ERR_PARSE;
}
-
+
if (add_to_iob(csp, buf, len))
{
/*
{
/*
* We were able to read a complete
- * header and can finaly enlist it.
+ * header and can finally enlist it.
*/
enlist(headers, p);
freez(p);
get_url_actions(csp, http);
}
- /*
+ /*
* Save a copy of the original request for logging
*/
- http->ocmd = strdup(http->cmd);
- if (http->ocmd == NULL)
- {
- log_error(LOG_LEVEL_FATAL,
- "Out of memory copying HTTP request line");
- }
+ http->ocmd = strdup_or_die(http->cmd);
enlist(csp->headers, http->cmd);
/* Append the previously read headers */
struct http_request *http = csp->http;
jb_err err;
+#ifdef FEATURE_CONNECTION_KEEP_ALIVE
+ if ((csp->config->feature_flags & RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE)
+ && (!strcmpic(csp->http->ver, "HTTP/1.1"))
+ && (csp->http->ssl == 0))
+ {
+ /* Assume persistence until further notice */
+ csp->flags |= CSP_FLAG_CLIENT_CONNECTION_KEEP_ALIVE;
+ }
+#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
+
err = sed(csp, FILTER_CLIENT_HEADERS);
if (JB_ERR_OK != err)
{
return JB_ERR_PARSE;
}
+#ifdef FEATURE_CONNECTION_KEEP_ALIVE
+ if (csp->http->ssl == 0)
+ {
+ verify_request_length(csp);
+ }
+#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
+
return JB_ERR_OK;
}
*
* Function : chat
*
- * Description : Once a connection to the client has been accepted,
+ * Description : Once a connection from the client has been accepted,
* this function is called (via serve()) to handle the
- * main business of the communication. When this
- * function returns, the caller must close the client
- * socket handle.
+ * main business of the communication. This function
+ * returns after dealing with a single request. It can
+ * be called multiple times with the same client socket
+ * if the client is keeping the connection alive.
+ *
+ * The decision whether or not a client connection will
+ * be kept alive is up to the caller which also must
+ * close the client socket when done.
*
* FIXME: chat is nearly thousand lines long.
* Ridiculous.
jb_socket maxfd;
int server_body;
int ms_iis5_hack = 0;
- size_t byte_count = 0;
- int forwarded_connect_retries = 0;
- int max_forwarded_connect_retries = csp->config->forwarded_connect_retries;
+ unsigned long long byte_count = 0;
const struct forward_spec *fwd;
struct http_request *http;
- int len; /* for buffer sizes (and negative error codes) */
-
- /* Function that does the content filtering for the current request */
- filter_function_ptr content_filter = NULL;
+ long len = 0; /* for buffer sizes (and negative error codes) */
+ int buffer_and_filter_content = 0;
/* Skeleton for HTTP response, if we should intercept the request */
struct http_response *rsp;
+ struct timeval timeout;
+#ifdef FEATURE_CONNECTION_KEEP_ALIVE
+ int watch_client_socket = 1;
+#endif
memset(buf, 0, sizeof(buf));
{
log_error(LOG_LEVEL_FATAL, "gateway spec is NULL!?!? This can't happen!");
/* Never get here - LOG_LEVEL_FATAL causes program exit */
+ return;
}
/*
csp->action->string[ACTION_STRING_LIMIT_CONNECT];
assert(NULL != acceptable_connect_ports);
log_error(LOG_LEVEL_INFO, "Request from %s marked for blocking. "
- "limit-connect{%s} doesn't allow CONNECT requests to port %d.",
- csp->ip_addr_str, acceptable_connect_ports, csp->http->port);
+ "limit-connect{%s} doesn't allow CONNECT requests to %s",
+ csp->ip_addr_str, acceptable_connect_ports, csp->http->hostport);
csp->action->flags |= ACTION_BLOCK;
http->ssl = 0;
}
build_request_line(csp, fwd, &csp->headers->first->str);
}
- hdr = list_to_text(csp->headers);
- if (hdr == NULL)
- {
- /* FIXME Should handle error properly */
- log_error(LOG_LEVEL_FATAL, "Out of memory parsing client header");
- }
-
/*
* We have a request. Check if one of the crunchers wants it.
*/
if (crunch_response_triggered(csp, crunchers_all))
{
/*
- * Yes. The client got the crunch response
- * and we are done here after cleaning up.
+ * Yes. The client got the crunch response and we're done here.
*/
- freez(hdr);
- list_remove_all(csp->headers);
-
return;
}
- /*
- * The headers can't be removed earlier because
- * they were still needed for the referrer check
- * in case of CGI crunches.
- *
- * XXX: Would it be worth to move the referrer check
- * into client_referrer() and set a flag if it's trusted?
- */
- list_remove_all(csp->headers);
-
+ log_applied_actions(csp->action);
log_error(LOG_LEVEL_GPC, "%s%s", http->hostport, http->path);
if (fwd->forward_host)
{
- log_error(LOG_LEVEL_CONNECT, "via %s:%d to: %s",
- fwd->forward_host, fwd->forward_port, http->hostport);
+ log_error(LOG_LEVEL_CONNECT, "via [%s]:%d to: %s",
+ fwd->forward_host, fwd->forward_port, http->hostport);
}
else
{
/* here we connect to the server, gateway, or the forwarder */
- while ( (csp->sfd = forwarded_connect(fwd, http, csp))
- && (errno == EINVAL) && (forwarded_connect_retries++ < max_forwarded_connect_retries))
+#ifdef FEATURE_CONNECTION_KEEP_ALIVE
+ if ((csp->server_connection.sfd != JB_INVALID_SOCKET)
+ && socket_is_still_alive(csp->server_connection.sfd)
+ && connection_destination_matches(&csp->server_connection, http, fwd))
{
- log_error(LOG_LEVEL_ERROR, "failed request #%u to connect to %s. Trying again.",
- forwarded_connect_retries, http->hostport);
+ log_error(LOG_LEVEL_CONNECT,
+ "Reusing server socket %u. Opened for %s.",
+ csp->server_connection.sfd, csp->server_connection.host);
}
-
- if (csp->sfd == JB_INVALID_SOCKET)
+ else
{
- if (fwd->type != SOCKS_NONE)
+ if (csp->server_connection.sfd != JB_INVALID_SOCKET)
{
- /* Socks error. */
- rsp = error_response(csp, "forwarding-failed", errno);
- }
- else if (errno == EINVAL)
- {
- rsp = error_response(csp, "no-such-domain", errno);
- }
- else
- {
- rsp = error_response(csp, "connect-failed", errno);
- log_error(LOG_LEVEL_CONNECT, "connect to: %s failed: %E",
- http->hostport);
+ log_error(LOG_LEVEL_CONNECT,
+ "Closing server socket %u. Opened for %s.",
+ csp->server_connection.sfd, csp->server_connection.host);
+ close_socket(csp->server_connection.sfd);
+ mark_connection_closed(&csp->server_connection);
}
+#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
- /* Write the answer to the client */
- if (rsp != NULL)
+ csp->server_connection.sfd = forwarded_connect(fwd, http, csp);
+
+ if (csp->server_connection.sfd == JB_INVALID_SOCKET)
{
- send_crunch_response(csp, rsp);
- }
+ if (fwd->type != SOCKS_NONE)
+ {
+ /* Socks error. */
+ rsp = error_response(csp, "forwarding-failed");
+ }
+ else if (errno == EINVAL)
+ {
+ rsp = error_response(csp, "no-such-domain");
+ }
+ else
+ {
+ rsp = error_response(csp, "connect-failed");
+ }
- freez(hdr);
- return;
+ /* Write the answer to the client */
+ if (rsp != NULL)
+ {
+ send_crunch_response(csp, rsp);
+ }
+
+ return;
+ }
+#ifdef FEATURE_CONNECTION_KEEP_ALIVE
+ save_connection_destination(csp->server_connection.sfd,
+ http, fwd, &csp->server_connection);
+ csp->server_connection.keep_alive_timeout =
+ (unsigned)csp->config->keep_alive_timeout;
}
+#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
if (fwd->forward_host || (http->ssl == 0))
{
+ hdr = list_to_text(csp->headers);
+ if (hdr == NULL)
+ {
+ /* FIXME Should handle error properly */
+ log_error(LOG_LEVEL_FATAL, "Out of memory parsing client header");
+ }
+ list_remove_all(csp->headers);
+
/*
* Write the client's (modified) header to the server
* (along with anything else that may be in the buffer)
*/
- if (write_socket(csp->sfd, hdr, strlen(hdr))
- || (flush_socket(csp->sfd, csp->iob) < 0))
+ if (write_socket(csp->server_connection.sfd, hdr, strlen(hdr))
+ || (flush_socket(csp->server_connection.sfd, csp->iob) < 0))
{
log_error(LOG_LEVEL_CONNECT,
"write header to: %s failed: %E", http->hostport);
- rsp = error_response(csp, "connect-failed", errno);
+ rsp = error_response(csp, "connect-failed");
if (rsp)
{
send_crunch_response(csp, rsp);
freez(hdr);
return;
}
+ freez(hdr);
}
else
{
/*
* We're running an SSL tunnel and we're not forwarding,
- * so just send the "connect succeeded" message to the
- * client, flush the rest, and get out of the way.
+ * so just ditch the client headers, send the "connect succeeded"
+ * message to the client, flush the rest, and get out of the way.
*/
+ list_remove_all(csp->headers);
if (write_socket(csp->cfd, CSUCCEED, strlen(CSUCCEED)))
{
- freez(hdr);
return;
}
IOB_RESET(csp);
log_error(LOG_LEVEL_CONNECT, "to %s successful", http->hostport);
- /* we're finished with the client's header */
- freez(hdr);
+ csp->server_connection.request_sent = time(NULL);
- maxfd = (csp->cfd > csp->sfd) ? csp->cfd : csp->sfd;
+ maxfd = (csp->cfd > csp->server_connection.sfd) ?
+ csp->cfd : csp->server_connection.sfd;
/* pass data between the client and server
* until one or the other shuts down the connection.
#else
FD_ZERO(&rfds);
#endif
- FD_SET(csp->cfd, &rfds);
- FD_SET(csp->sfd, &rfds);
+#ifdef FEATURE_CONNECTION_KEEP_ALIVE
+ if (!watch_client_socket)
+ {
+ maxfd = csp->server_connection.sfd;
+ }
+ else
+#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
+ {
+ FD_SET(csp->cfd, &rfds);
+ }
+
+ FD_SET(csp->server_connection.sfd, &rfds);
#ifdef FEATURE_CONNECTION_KEEP_ALIVE
- if (server_body && server_response_is_complete(csp, byte_count))
+ if ((csp->flags & CSP_FLAG_CHUNKED)
+ && !(csp->flags & CSP_FLAG_CONTENT_LENGTH_SET)
+ && ((csp->iob->eod - csp->iob->cur) >= 5)
+ && !memcmp(csp->iob->eod-5, "0\r\n\r\n", 5))
{
+ /*
+ * XXX: This check should be obsolete now,
+ * but let's wait a while to be sure.
+ */
log_error(LOG_LEVEL_CONNECT,
- "Done reading from server. Expected content length: %d. "
- "Actual content length: %d. Most recently received: %d.",
- csp->expected_content_length, byte_count, len);
+ "Looks like we got the last chunk together with "
+ "the server headers but didn't detect it earlier. "
+ "We better stop reading.");
+ byte_count = (unsigned long long)(csp->iob->eod - csp->iob->cur);
+ csp->expected_content_length = byte_count;
+ csp->flags |= CSP_FLAG_CONTENT_LENGTH_SET;
+ }
+ if (server_body && server_response_is_complete(csp, byte_count))
+ {
+ if (csp->expected_content_length == byte_count)
+ {
+ log_error(LOG_LEVEL_CONNECT,
+ "Done reading from server. Content length: %llu as expected. "
+ "Bytes most recently read: %d.",
+ byte_count, len);
+ }
+ else
+ {
+ log_error(LOG_LEVEL_CONNECT,
+ "Done reading from server. Expected content length: %llu. "
+ "Actual content length: %llu. Bytes most recently read: %d.",
+ csp->expected_content_length, byte_count, len);
+ }
len = 0;
/*
* XXX: should not jump around,
}
#endif /* FEATURE_CONNECTION_KEEP_ALIVE */
- n = select((int)maxfd+1, &rfds, NULL, NULL, NULL);
+ timeout.tv_sec = csp->config->socket_timeout;
+ timeout.tv_usec = 0;
+ n = select((int)maxfd+1, &rfds, NULL, NULL, &timeout);
- if (n < 0)
+ if (n == 0)
+ {
+ log_error(LOG_LEVEL_ERROR,
+ "Didn't receive data in time: %s", http->url);
+ if ((byte_count == 0) && (http->ssl == 0))
+ {
+ send_crunch_response(csp, error_response(csp, "connection-timeout"));
+ }
+ mark_server_socket_tainted(csp);
+ return;
+ }
+ else if (n < 0)
{
log_error(LOG_LEVEL_ERROR, "select() failed!: %E");
mark_server_socket_tainted(csp);
/*
* This is the body of the browser's request,
* just read and write it.
+ *
+ * XXX: Make sure the client doesn't use pipelining
+ * behind Privoxy's back.
*/
if (FD_ISSET(csp->cfd, &rfds))
{
- len = read_socket(csp->cfd, buf, sizeof(buf) - 1);
+ int max_bytes_to_read = sizeof(buf) - 1;
+
+#ifdef FEATURE_CONNECTION_KEEP_ALIVE
+ if ((csp->flags & CSP_FLAG_CLIENT_REQUEST_COMPLETELY_READ))
+ {
+ if (data_is_available(csp->cfd, 0))
+ {
+ /*
+ * If the next request is already waiting, we have
+ * to stop select()ing the client socket. Otherwise
+ * we would always return right away and get nothing
+ * else done.
+ */
+ watch_client_socket = 0;
+ log_error(LOG_LEVEL_CONNECT,
+ "Stopping to watch the client socket %d. "
+ "There's already another request waiting.",
+ csp->cfd);
+ continue;
+ }
+ /*
+ * If the client socket is set, but there's no data
+ * available on the socket, the client went fishing
+ * and continuing talking to the server makes no sense.
+ */
+ log_error(LOG_LEVEL_CONNECT,
+ "The client closed socket %d while "
+ "the server socket %d is still open.",
+ csp->cfd, csp->server_connection.sfd);
+ mark_server_socket_tainted(csp);
+ break;
+ }
+ if (csp->expected_client_content_length != 0)
+ {
+ if (csp->expected_client_content_length < (sizeof(buf) - 1))
+ {
+ max_bytes_to_read = (int)csp->expected_client_content_length;
+ }
+ log_error(LOG_LEVEL_CONNECT,
+ "Waiting for up to %d bytes from the client.",
+ max_bytes_to_read);
+ }
+ assert(max_bytes_to_read < sizeof(buf));
+#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
+
+ len = read_socket(csp->cfd, buf, max_bytes_to_read);
if (len <= 0)
{
break; /* "game over, man" */
}
- if (write_socket(csp->sfd, buf, (size_t)len))
+#ifdef FEATURE_CONNECTION_KEEP_ALIVE
+ if (csp->expected_client_content_length != 0)
+ {
+ assert(len <= max_bytes_to_read);
+ csp->expected_client_content_length -= (unsigned)len;
+ log_error(LOG_LEVEL_CONNECT,
+ "Expected client content length set to %llu "
+ "after reading %d bytes.",
+ csp->expected_client_content_length, len);
+ if (csp->expected_client_content_length == 0)
+ {
+ log_error(LOG_LEVEL_CONNECT,
+ "Done reading from the client.");
+ csp->flags |= CSP_FLAG_CLIENT_REQUEST_COMPLETELY_READ;
+ }
+ }
+#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
+
+ if (write_socket(csp->server_connection.sfd, buf, (size_t)len))
{
log_error(LOG_LEVEL_ERROR, "write to: %s failed: %E", http->host);
mark_server_socket_tainted(csp);
* If `hdr' is null, then it's the header otherwise it's the body.
* FIXME: Does `hdr' really mean `host'? No.
*/
- if (FD_ISSET(csp->sfd, &rfds))
+ if (FD_ISSET(csp->server_connection.sfd, &rfds))
{
- fflush(0);
- len = read_socket(csp->sfd, buf, sizeof(buf) - 1);
+#ifdef FEATURE_CONNECTION_KEEP_ALIVE
+ /*
+ * If we are buffering content, we don't want to eat up to
+ * buffer-limit bytes if the client no longer cares about them.
+ * If we aren't buffering, however, a dead client socket will be
+ * noticed pretty much right away anyway, so we can reduce the
+ * overhead by skipping the check.
+ */
+ if (buffer_and_filter_content && !socket_is_still_alive(csp->cfd))
+ {
+#ifdef _WIN32
+ log_error(LOG_LEVEL_CONNECT,
+ "The server still wants to talk, but the client may already have hung up on us.");
+#else
+ log_error(LOG_LEVEL_CONNECT,
+ "The server still wants to talk, but the client hung up on us.");
+ mark_server_socket_tainted(csp);
+ return;
+#endif /* def _WIN32 */
+ }
+#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
+
+ fflush(NULL);
+ len = read_socket(csp->server_connection.sfd, buf, sizeof(buf) - 1);
if (len < 0)
{
mark_server_socket_tainted(csp);
return;
}
-
- rsp = error_response(csp, "connect-failed", errno);
- if (rsp)
- {
- send_crunch_response(csp, rsp);
- }
-
- return;
+ /*
+ * XXX: Consider handling the cases above the same.
+ */
+ mark_server_socket_tainted(csp);
+ len = 0;
}
#ifdef FEATURE_CONNECTION_KEEP_ALIVE
if (csp->flags & CSP_FLAG_CHUNKED)
{
- if ((len > 5) && !memcmp(buf+len-5, "0\r\n\r\n", 5))
+ if ((len >= 5) && !memcmp(buf+len-5, "0\r\n\r\n", 5))
{
/* XXX: this is a temporary hack */
log_error(LOG_LEVEL_CONNECT,
"Looks like we reached the end of the last chunk. "
"We better stop reading.");
- csp->expected_content_length = byte_count + (size_t)len;
+ csp->expected_content_length = byte_count + (unsigned long long)len;
csp->flags |= CSP_FLAG_CONTENT_LENGTH_SET;
}
}
* now is the time to apply content modification
* and send the result to the client.
*/
- if (content_filter)
+ if (buffer_and_filter_content)
{
- p = execute_content_filter(csp, content_filter);
+ p = execute_content_filters(csp);
/*
- * If the content filter fails, use the original
+ * If content filtering fails, use the original
* buffer and length.
* (see p != NULL ? p : csp->iob->cur below)
*/
{
csp->content_length = (size_t)(csp->iob->eod - csp->iob->cur);
}
+#ifdef FEATURE_COMPRESSION
+ else if ((csp->flags & CSP_FLAG_CLIENT_SUPPORTS_DEFLATE)
+ && (csp->content_length > LOWER_LENGTH_LIMIT_FOR_COMPRESSION))
+ {
+ char *compressed_content = compress_buffer(p,
+ (size_t *)&csp->content_length, csp->config->compression_level);
+ if (compressed_content != NULL)
+ {
+ freez(p);
+ p = compressed_content;
+ csp->flags |= CSP_FLAG_BUFFERED_CONTENT_DEFLATED;
+ }
+ }
+#endif
if (JB_ERR_OK != update_server_headers(csp))
{
}
if (write_socket(csp->cfd, hdr, strlen(hdr))
- || write_socket(csp->cfd, p != NULL ? p : csp->iob->cur, csp->content_length))
+ || write_socket(csp->cfd,
+ ((p != NULL) ? p : csp->iob->cur), (size_t)csp->content_length))
{
log_error(LOG_LEVEL_ERROR, "write modified content to client failed: %E");
freez(hdr);
*/
if (server_body || http->ssl)
{
- if (content_filter)
+ if (buffer_and_filter_content)
{
/*
* If there is no memory left for buffering the content, or the buffer limit
if (add_to_iob(csp, buf, len))
{
size_t hdrlen;
- int flushed;
+ long flushed;
log_error(LOG_LEVEL_INFO,
"Flushing header and buffers. Stepping back from filtering.");
hdr = list_to_text(csp->headers);
if (hdr == NULL)
{
- /*
+ /*
* Memory is too tight to even generate the header.
* Send our static "Out-of-memory" page.
*/
* we just flushed. len will be added a few lines below,
* hdrlen doesn't matter for LOG_LEVEL_CLF.
*/
- byte_count = (size_t)flushed;
+ byte_count = (unsigned long long)flushed;
freez(hdr);
- content_filter = NULL;
+ buffer_and_filter_content = 0;
server_body = 1;
}
}
return;
}
}
- byte_count += (size_t)len;
+ byte_count += (unsigned long long)len;
continue;
}
else
{
- const char *header_start;
/*
* We're still looking for the end of the server's header.
* Buffer up the data we just read. If that fails, there's
{
log_error(LOG_LEVEL_ERROR, "Out of memory while looking for end of server headers.");
rsp = cgi_error_memory();
- send_crunch_response(csp, rsp);
+ send_crunch_response(csp, rsp);
mark_server_socket_tainted(csp);
return;
}
- header_start = csp->iob->cur;
-
/* Convert iob into something sed() can digest */
if (JB_ERR_PARSE == get_server_headers(csp))
{
* The header is incomplete and there isn't anything
* we can do about it.
*/
- log_error(LOG_LEVEL_INFO,
- "MS IIS5 hack didn't produce valid headers.");
- break;
+ log_error(LOG_LEVEL_ERROR, "Invalid server headers. "
+ "Applying the MS IIS5 hack didn't help.");
+ log_error(LOG_LEVEL_CLF,
+ "%s - - [%T] \"%s\" 502 0", csp->ip_addr_str, http->cmd);
+ write_socket(csp->cfd, INVALID_SERVER_HEADERS_RESPONSE,
+ strlen(INVALID_SERVER_HEADERS_RESPONSE));
+ mark_server_socket_tainted(csp);
+ return;
}
else
{
* Since we have to wait for more from the server before
* we can parse the headers we just continue here.
*/
+ log_error(LOG_LEVEL_CONNECT,
+ "Continuing buffering headers. Bytes most recently read: %d.",
+ len);
continue;
}
}
+ else
+ {
+ /*
+ * Account for the content bytes we
+ * might have gotten with the headers.
+ */
+ assert(csp->iob->eod >= csp->iob->cur);
+ byte_count = (unsigned long long)(csp->iob->eod - csp->iob->cur);
+ }
/* Did we actually get anything? */
if (NULL == csp->headers->first)
{
- log_error(LOG_LEVEL_ERROR, "Empty server or forwarder response.");
- log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" 502 0", csp->ip_addr_str, http->cmd);
- write_socket(csp->cfd, NO_SERVER_DATA_RESPONSE, strlen(NO_SERVER_DATA_RESPONSE));
+ if ((csp->flags & CSP_FLAG_REUSED_CLIENT_CONNECTION))
+ {
+ log_error(LOG_LEVEL_ERROR,
+ "No server or forwarder response received on socket %d. "
+ "Closing client socket %d without sending data.",
+ csp->server_connection.sfd, csp->cfd);
+ log_error(LOG_LEVEL_CLF,
+ "%s - - [%T] \"%s\" 502 0", csp->ip_addr_str, http->cmd);
+ }
+ else
+ {
+ log_error(LOG_LEVEL_ERROR,
+ "No server or forwarder response received on socket %d.",
+ csp->server_connection.sfd);
+ send_crunch_response(csp, error_response(csp, "no-server-data"));
+ }
free_http_request(http);
mark_server_socket_tainted(csp);
return;
log_error(LOG_LEVEL_FATAL, "Out of memory parsing server header");
}
+ if ((csp->flags & CSP_FLAG_CHUNKED)
+ && !(csp->flags & CSP_FLAG_CONTENT_LENGTH_SET)
+ && ((csp->iob->eod - csp->iob->cur) >= 5)
+ && !memcmp(csp->iob->eod-5, "0\r\n\r\n", 5))
+ {
+ log_error(LOG_LEVEL_CONNECT,
+ "Looks like we got the last chunk together with "
+ "the server headers. We better stop reading.");
+ byte_count = (unsigned long long)(csp->iob->eod - csp->iob->cur);
+ csp->expected_content_length = byte_count;
+ csp->flags |= CSP_FLAG_CONTENT_LENGTH_SET;
+ }
+
+ csp->server_connection.response_received = time(NULL);
+
if (crunch_response_triggered(csp, crunchers_light))
{
/*
if (!http->ssl) /* We talk plaintext */
{
- content_filter = get_filter_function(csp);
+ buffer_and_filter_content = content_requires_filtering(csp);
}
/*
* Only write if we're not buffering for content modification
*/
- if (!content_filter)
+ if (!buffer_and_filter_content)
{
/*
* Write the server's (modified) header to
mark_server_socket_tainted(csp);
return;
}
-
- byte_count += (size_t)len;
- }
- else
- {
- /*
- * XXX: the header lenght should probably
- * be calculated by get_server_headers().
- */
- int header_length = csp->iob->cur - header_start;
- assert(csp->iob->cur > header_start);
- byte_count += (size_t)(len - header_length);
}
/* we're finished with the server's header */
*/
if (ms_iis5_hack)
{
- log_error(LOG_LEVEL_INFO,
- "Closed server connection detected with MS IIS5 hack enabled.");
- break;
+ log_error(LOG_LEVEL_ERROR,
+ "Closed server connection detected. "
+ "Applying the MS IIS5 hack didn't help.");
+ log_error(LOG_LEVEL_CLF,
+ "%s - - [%T] \"%s\" 502 0", csp->ip_addr_str, http->cmd);
+ write_socket(csp->cfd, INVALID_SERVER_HEADERS_RESPONSE,
+ strlen(INVALID_SERVER_HEADERS_RESPONSE));
+ mark_server_socket_tainted(csp);
+ return;
}
}
continue;
if (csp->content_length == 0)
{
/*
- * If Privoxy didn't recalculate the Content-Lenght,
+ * If Privoxy didn't recalculate the Content-Length,
* byte_count is still correct.
*/
csp->content_length = byte_count;
}
+#ifdef FEATURE_CONNECTION_KEEP_ALIVE
if ((csp->flags & CSP_FLAG_CONTENT_LENGTH_SET)
&& (csp->expected_content_length != byte_count))
{
- log_error(LOG_LEVEL_ERROR,
- "Received %d bytes while expecting %d.",
+ log_error(LOG_LEVEL_CONNECT,
+ "Received %llu bytes while expecting %llu.",
byte_count, csp->expected_content_length);
mark_server_socket_tainted(csp);
}
+#endif
- log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" 200 %d",
+ log_error(LOG_LEVEL_CLF, "%s - - [%T] \"%s\" 200 %llu",
csp->ip_addr_str, http->ocmd, csp->content_length);
+
+ csp->server_connection.timestamp = time(NULL);
+}
+
+
+#ifdef FEATURE_CONNECTION_KEEP_ALIVE
+/*********************************************************************
+ *
+ * Function : prepare_csp_for_next_request
+ *
+ * Description : Put the csp in a mostly vergin state.
+ *
+ * Parameters :
+ * 1 : csp = Current client state (buffers, headers, etc...)
+ *
+ * Returns : N/A
+ *
+ *********************************************************************/
+static void prepare_csp_for_next_request(struct client_state *csp)
+{
+ unsigned int toggled_on_flag_set = (0 != (csp->flags & CSP_FLAG_TOGGLED_ON));
+
+ csp->content_type = 0;
+ csp->content_length = 0;
+ csp->expected_content_length = 0;
+ csp->expected_client_content_length = 0;
+ list_remove_all(csp->headers);
+ freez(csp->iob->buf);
+ memset(csp->iob, 0, sizeof(csp->iob));
+ freez(csp->error_message);
+ free_http_request(csp->http);
+ destroy_list(csp->headers);
+ destroy_list(csp->tags);
+ free_current_action(csp->action);
+ if (NULL != csp->fwd)
+ {
+ unload_forward_spec(csp->fwd);
+ csp->fwd = NULL;
+ }
+ /* XXX: Store per-connection flags someplace else. */
+ csp->flags = (CSP_FLAG_ACTIVE | CSP_FLAG_REUSED_CLIENT_CONNECTION);
+ if (toggled_on_flag_set)
+ {
+ csp->flags |= CSP_FLAG_TOGGLED_ON;
+ }
}
+#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
/*********************************************************************
* Function : serve
*
* Description : This is little more than chat. We only "serve" to
- * to close any socket that chat may have opened.
+ * to close (or remember) any socket that chat may have
+ * opened.
*
* Parameters :
* 1 : csp = Current client state (buffers, headers, etc...)
static void serve(struct client_state *csp)
#endif /* def AMIGA */
{
- chat(csp);
- close_socket(csp->cfd);
+#ifdef FEATURE_CONNECTION_KEEP_ALIVE
+#ifdef FEATURE_CONNECTION_SHARING
+ static int monitor_thread_running = 0;
+#endif /* def FEATURE_CONNECTION_SHARING */
+ int continue_chatting = 0;
- if (csp->sfd != JB_INVALID_SOCKET)
+ do
{
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
- if ((csp->flags & CSP_FLAG_SERVER_CONNECTION_KEEP_ALIVE))
+ unsigned int latency;
+ int config_file_change_detected = 0; /* Only used for debugging */
+
+ chat(csp);
+
+ /*
+ * If the request has been crunched,
+ * the calculated latency is zero.
+ */
+ latency = (unsigned)(csp->server_connection.response_received -
+ csp->server_connection.request_sent) / 2;
+
+ continue_chatting = (csp->config->feature_flags
+ & RUNTIME_FEATURE_CONNECTION_KEEP_ALIVE)
+ && !(csp->flags & CSP_FLAG_SERVER_SOCKET_TAINTED)
+ && ((csp->flags & CSP_FLAG_SERVER_CONNECTION_KEEP_ALIVE)
+ || (csp->flags & CSP_FLAG_CRUNCHED))
+ && (csp->cfd != JB_INVALID_SOCKET)
+ && ((csp->flags & CSP_FLAG_CLIENT_CONNECTION_KEEP_ALIVE)
+ || (csp->config->feature_flags &
+ RUNTIME_FEATURE_CONNECTION_SHARING));
+
+ if (continue_chatting && !(csp->flags & CSP_FLAG_CRUNCHED))
+ {
+ continue_chatting = (csp->server_connection.sfd != JB_INVALID_SOCKET)
+ && socket_is_still_alive(csp->server_connection.sfd);
+ if (continue_chatting)
+ {
+ if (!(csp->flags & CSP_FLAG_SERVER_KEEP_ALIVE_TIMEOUT_SET))
+ {
+ csp->server_connection.keep_alive_timeout = csp->config->default_server_timeout;
+ log_error(LOG_LEVEL_CONNECT,
+ "The server didn't specify how long the connection will stay open. "
+ "Assumed timeout is: %u.", csp->server_connection.keep_alive_timeout);
+ }
+ continue_chatting = (latency < csp->server_connection.keep_alive_timeout);
+ }
+ }
+
+ if (continue_chatting && any_loaded_file_changed(csp->config->config_file_list))
{
- remember_connection(csp->sfd, csp->http, forward_url(csp, csp->http));
+ continue_chatting = 0;
+ config_file_change_detected = 1;
}
- else
+
+ if (continue_chatting)
{
- forget_connection(csp->sfd);
- close_socket(csp->sfd);
+ unsigned int client_timeout = 1; /* XXX: Use something else here? */
+
+ if (0 != (csp->flags & CSP_FLAG_CLIENT_CONNECTION_KEEP_ALIVE))
+ {
+ if (csp->server_connection.sfd != JB_INVALID_SOCKET)
+ {
+ client_timeout = (unsigned)csp->server_connection.keep_alive_timeout - latency;
+ log_error(LOG_LEVEL_CONNECT,
+ "Waiting for the next client request on socket %d. "
+ "Keeping the server socket %d to %s open.",
+ csp->cfd, csp->server_connection.sfd, csp->server_connection.host);
+ }
+ else
+ {
+ log_error(LOG_LEVEL_CONNECT,
+ "Waiting for the next client request on socket %d. "
+ "No server socket to keep open.", csp->cfd);
+ }
+ }
+ if ((csp->flags & CSP_FLAG_CLIENT_CONNECTION_KEEP_ALIVE)
+ && data_is_available(csp->cfd, (int)client_timeout)
+ && socket_is_still_alive(csp->cfd))
+ {
+ log_error(LOG_LEVEL_CONNECT,
+ "Client request arrived in time on socket %d.", csp->cfd);
+ prepare_csp_for_next_request(csp);
+ }
+ else
+ {
+ if (0 != (csp->flags & CSP_FLAG_CLIENT_CONNECTION_KEEP_ALIVE))
+ {
+ log_error(LOG_LEVEL_CONNECT,
+ "No additional client request received in time on socket %d.",
+ csp->cfd);
+ }
+#ifdef FEATURE_CONNECTION_SHARING
+ if ((csp->config->feature_flags & RUNTIME_FEATURE_CONNECTION_SHARING)
+ && (socket_is_still_alive(csp->server_connection.sfd)))
+ {
+ time_t time_open = time(NULL) - csp->server_connection.timestamp;
+
+ if (csp->server_connection.keep_alive_timeout < time_open - (time_t)latency)
+ {
+ break;
+ }
+
+ remember_connection(&csp->server_connection);
+ csp->server_connection.sfd = JB_INVALID_SOCKET;
+ close_socket(csp->cfd);
+ csp->cfd = JB_INVALID_SOCKET;
+ privoxy_mutex_lock(&connection_reuse_mutex);
+ if (!monitor_thread_running)
+ {
+ monitor_thread_running = 1;
+ privoxy_mutex_unlock(&connection_reuse_mutex);
+ wait_for_alive_connections();
+ privoxy_mutex_lock(&connection_reuse_mutex);
+ monitor_thread_running = 0;
+ }
+ privoxy_mutex_unlock(&connection_reuse_mutex);
+ }
+#endif /* def FEATURE_CONNECTION_SHARING */
+ break;
+ }
}
+ else if (csp->server_connection.sfd != JB_INVALID_SOCKET)
+ {
+ log_error(LOG_LEVEL_CONNECT,
+ "The connection on server socket %d to %s isn't reusable. Closing. "
+ "Server connection: keep-alive %u, tainted: %u, socket alive %u. "
+ "Client connection: socket alive: %u. Server timeout: %u. "
+ "Configuration file change detected: %u",
+ csp->server_connection.sfd, csp->server_connection.host,
+ 0 != (csp->flags & CSP_FLAG_SERVER_CONNECTION_KEEP_ALIVE),
+ 0 != (csp->flags & CSP_FLAG_SERVER_SOCKET_TAINTED),
+ socket_is_still_alive(csp->server_connection.sfd),
+ socket_is_still_alive(csp->cfd),
+ csp->server_connection.keep_alive_timeout,
+ config_file_change_detected);
+ }
+ } while (continue_chatting);
+
#else
- close_socket(csp->sfd);
+ chat(csp);
#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
+
+ if (csp->server_connection.sfd != JB_INVALID_SOCKET)
+ {
+#ifdef FEATURE_CONNECTION_SHARING
+ if (csp->config->feature_flags & RUNTIME_FEATURE_CONNECTION_SHARING)
+ {
+ forget_connection(csp->server_connection.sfd);
+ }
+#endif /* def FEATURE_CONNECTION_SHARING */
+ close_socket(csp->server_connection.sfd);
+ }
+
+#ifdef FEATURE_CONNECTION_KEEP_ALIVE
+ mark_connection_closed(&csp->server_connection);
+#endif
+
+ if (csp->cfd != JB_INVALID_SOCKET)
+ {
+ log_error(LOG_LEVEL_CONNECT, "Closing client socket %d. "
+ "Keep-alive: %u, Socket alive: %u. Data available: %u.",
+ csp->cfd, 0 != (csp->flags & CSP_FLAG_CLIENT_CONNECTION_KEEP_ALIVE),
+ socket_is_still_alive(csp->cfd), data_is_available(csp->cfd, 0));
+ close_socket(csp->cfd);
}
csp->flags &= ~CSP_FLAG_ACTIVE;
#ifndef HAVE_RANDOM
privoxy_mutex_init(&rand_mutex);
#endif /* ndef HAVE_RANDOM */
+
#endif /* def MUTEX_LOCKS_AVAILABLE */
}
*
*********************************************************************/
#ifdef __MINGW32__
-int real_main(int argc, const char *argv[])
+int real_main(int argc, char **argv)
#else
-int main(int argc, const char *argv[])
+int main(int argc, char **argv)
#endif
{
int argc_pos = 0;
#ifdef unix
struct passwd *pw = NULL;
struct group *grp = NULL;
- char *p;
int do_chroot = 0;
char *pre_chroot_nslookup_to_load_resolver = NULL;
#endif
#endif
;
+ /* Prepare mutexes if supported and necessary. */
+ initialize_mutexes();
+
+ /* Enable logging until further notice. */
+ init_log_module();
+
/*
* Parse the command line arguments
*
const char *pName = argv[argc_pos] + 9;
if (*pName == ':')
pName++;
- exit( (install_service(pName)) ? 0 : 1 );
+ exit((install_service(pName)) ? 0 : 1);
}
- else if (strncmp(argv[argc_pos], "--uninstall", + 11) == 0)
+ else if (strncmp(argv[argc_pos], "--uninstall", 11) == 0)
{
const char *pName = argv[argc_pos] + 11;
if (*pName == ':')
pName++;
exit((uninstall_service(pName)) ? 0 : 1);
}
- else if (strcmp(argv[argc_pos], "--service" ) == 0)
+ else if (strcmp(argv[argc_pos], "--service") == 0)
{
bRunAsService = TRUE;
w32_set_service_cwd();
usage(argv[0]);
}
- else if(strcmp(argv[argc_pos], "--version") == 0)
+ else if (strcmp(argv[argc_pos], "--version") == 0)
{
printf("Privoxy version " VERSION " (" HOME_PAGE_URL ")\n");
exit(0);
#if defined(unix)
- else if (strcmp(argv[argc_pos], "--no-daemon" ) == 0)
+ else if (strcmp(argv[argc_pos], "--no-daemon") == 0)
{
- no_daemon = 1;
+ set_debug_level(LOG_LEVEL_FATAL | LOG_LEVEL_ERROR | LOG_LEVEL_INFO);
+ daemon_mode = 0;
}
- else if (strcmp(argv[argc_pos], "--pidfile" ) == 0)
+ else if (strcmp(argv[argc_pos], "--pidfile") == 0)
{
if (++argc_pos == argc) usage(argv[0]);
- pidfile = strdup(argv[argc_pos]);
+ pidfile = strdup_or_die(argv[argc_pos]);
}
- else if (strcmp(argv[argc_pos], "--user" ) == 0)
+ else if (strcmp(argv[argc_pos], "--user") == 0)
{
+ char *user_arg;
+ char *group_name;
+
if (++argc_pos == argc) usage(argv[argc_pos]);
- if ((NULL != (p = strchr(argv[argc_pos], '.'))) && *(p + 1) != '0')
+ user_arg = strdup_or_die(argv[argc_pos]);
+ group_name = strchr(user_arg, '.');
+ if (NULL != group_name)
{
- *p++ = '\0';
- if (NULL == (grp = getgrnam(p)))
+ /* Nul-terminate the user name */
+ *group_name = '\0';
+
+ /* Skip the former delimiter to actually reach the group name */
+ group_name++;
+
+ grp = getgrnam(group_name);
+ if (NULL == grp)
{
- log_error(LOG_LEVEL_FATAL, "Group %s not found.", p);
+ log_error(LOG_LEVEL_FATAL, "Group '%s' not found.", group_name);
}
}
-
- if (NULL == (pw = getpwnam(argv[argc_pos])))
+ pw = getpwnam(user_arg);
+ if (NULL == pw)
{
- log_error(LOG_LEVEL_FATAL, "User %s not found.", argv[argc_pos]);
+ log_error(LOG_LEVEL_FATAL, "User '%s' not found.", user_arg);
}
- if (p != NULL) *--p = '\0';
+ freez(user_arg);
}
- else if (strcmp(argv[argc_pos], "--pre-chroot-nslookup" ) == 0)
+ else if (strcmp(argv[argc_pos], "--pre-chroot-nslookup") == 0)
{
if (++argc_pos == argc) usage(argv[0]);
- pre_chroot_nslookup_to_load_resolver = strdup(argv[argc_pos]);
+ pre_chroot_nslookup_to_load_resolver = strdup_or_die(argv[argc_pos]);
}
- else if (strcmp(argv[argc_pos], "--chroot" ) == 0)
+ else if (strcmp(argv[argc_pos], "--chroot") == 0)
{
do_chroot = 1;
}
} /* -END- while (more arguments) */
+ show_version(Argv[0]);
+
#if defined(unix)
- if ( *configfile != '/' )
+ if (*configfile != '/')
{
char cwd[BUFFER_SIZE];
char *abs_file;
- size_t abs_file_size;
+ size_t abs_file_size;
/* make config-filename absolute here */
if (NULL == getcwd(cwd, sizeof(cwd)))
{
perror("failed to get current working directory");
- exit( 1 );
+ exit(1);
}
+ basedir = strdup_or_die(cwd);
/* XXX: why + 5? */
abs_file_size = strlen(cwd) + strlen(configfile) + 5;
- basedir = strdup(cwd);
-
- if (NULL == basedir ||
- NULL == (abs_file = malloc(abs_file_size)))
- {
- perror("malloc failed");
- exit( 1 );
- }
+ abs_file = malloc_or_die(abs_file_size);
strlcpy(abs_file, basedir, abs_file_size);
- strlcat(abs_file, "/", abs_file_size );
+ strlcat(abs_file, "/", abs_file_size);
strlcat(abs_file, configfile, abs_file_size);
configfile = abs_file;
}
InitWin32();
#endif
- /* Prepare mutexes if supported and necessary. */
- initialize_mutexes();
-
- /* Enable logging until further notice. */
- init_log_module(Argv[0]);
-
random_seed = (unsigned int)time(NULL);
#ifdef HAVE_RANDOM
srandom(random_seed);
#if !defined(_WIN32) && !defined(__OS2__) && !defined(AMIGA)
{
int idx;
- const int catched_signals[] = { SIGTERM, SIGINT, SIGHUP, 0 };
- const int ignored_signals[] = { SIGPIPE, 0 };
+ const int catched_signals[] = { SIGTERM, SIGINT, SIGHUP };
- for (idx = 0; catched_signals[idx] != 0; idx++)
+ for (idx = 0; idx < SZ(catched_signals); idx++)
{
-#ifdef sun /* FIXME: Is it safe to check for HAVE_SIGSET instead? */
+#ifdef sun /* FIXME: Is it safe to check for HAVE_SIGSET instead? */
if (sigset(catched_signals[idx], sig_handler) == SIG_ERR)
#else
if (signal(catched_signals[idx], sig_handler) == SIG_ERR)
}
}
- for (idx = 0; ignored_signals[idx] != 0; idx++)
+ if (signal(SIGPIPE, SIG_IGN) == SIG_ERR)
{
- if (signal(ignored_signals[idx], SIG_IGN) == SIG_ERR)
- {
- log_error(LOG_LEVEL_FATAL, "Can't set ignore-handler for signal %d: %E", ignored_signals[idx]);
- }
+ log_error(LOG_LEVEL_FATAL, "Can't set ignore-handler for SIGPIPE: %E");
}
}
*/
#if defined(unix)
{
- pid_t pid = 0;
-#if 0
- int fd;
-#endif
-
- if (!no_daemon)
+ if (daemon_mode)
{
- pid = fork();
+ int fd;
+ pid_t pid = fork();
- if ( pid < 0 ) /* error */
+ if (pid < 0) /* error */
{
perror("fork");
- exit( 3 );
+ exit(3);
}
- else if ( pid != 0 ) /* parent */
+ else if (pid != 0) /* parent */
{
int status;
pid_t wpid;
* must check for errors
* child died due to missing files aso
*/
- sleep( 1 );
- wpid = waitpid( pid, &status, WNOHANG );
- if ( wpid != 0 )
+ sleep(1);
+ wpid = waitpid(pid, &status, WNOHANG);
+ if (wpid != 0)
{
- exit( 1 );
+ exit(1);
}
- exit( 0 );
+ exit(0);
}
/* child */
-#if 1
- /* Should be more portable, but not as well tested */
+
setsid();
-#else /* !1 */
-#ifdef __FreeBSD__
- setpgrp(0,0);
-#else /* ndef __FreeBSD__ */
- setpgrp();
-#endif /* ndef __FreeBSD__ */
- fd = open("/dev/tty", O_RDONLY);
- if ( fd )
- {
- /* no error check here */
- ioctl( fd, TIOCNOTTY,0 );
- close ( fd );
- }
-#endif /* 1 */
+
/*
- * stderr (fd 2) will be closed later on, when the
- * log file has been parsed.
+ * stderr (fd 2) will be closed later on,
+ * when the config file has been parsed.
*/
+ close(0);
+ close(1);
+
+ /*
+ * Reserve fd 0 and 1 to prevent abort() and friends
+ * from sending stuff to the clients or servers.
+ */
+ fd = open("/dev/null", O_RDONLY);
+ if (fd == -1)
+ {
+ log_error(LOG_LEVEL_FATAL, "Failed to open /dev/null: %E");
+ }
+ else if (fd != 0)
+ {
+ if (dup2(fd, 0) == -1)
+ {
+ log_error(LOG_LEVEL_FATAL, "Failed to reserve fd 0: %E");
+ }
+ close(fd);
+ }
+ fd = open("/dev/null", O_WRONLY);
+ if (fd == -1)
+ {
+ log_error(LOG_LEVEL_FATAL, "Failed to open /dev/null: %E");
+ }
+ else if (fd != 1)
+ {
+ if (dup2(fd, 1) == -1)
+ {
+ log_error(LOG_LEVEL_FATAL, "Failed to reserve fd 1: %E");
+ }
+ close(fd);
+ }
- close( 0 );
- close( 1 );
chdir("/");
- } /* -END- if (!no_daemon) */
+ } /* -END- if (daemon_mode) */
/*
* As soon as we have written the PID file, we can switch
{
log_error(LOG_LEVEL_FATAL, "Cannot setgid(): Insufficient permissions.");
}
+ if (NULL != grp)
+ {
+ if (setgroups(1, &grp->gr_gid))
+ {
+ log_error(LOG_LEVEL_FATAL, "setgroups() failed: %E");
+ }
+ }
+ else if (initgroups(pw->pw_name, pw->pw_gid))
+ {
+ log_error(LOG_LEVEL_FATAL, "initgroups() failed: %E");
+ }
if (do_chroot)
{
if (!pw->pw_dir)
if (putenv(putenv_dummy) != 0)
{
log_error(LOG_LEVEL_FATAL, "Cannot putenv(): HOME");
- }
+ }
snprintf(putenv_dummy, sizeof(putenv_dummy), "USER=%s", pw->pw_name);
if (putenv(putenv_dummy) != 0)
*/
if (bRunAsService)
{
- /* Yup, so now we must attempt to establish a connection
+ /* Yup, so now we must attempt to establish a connection
* with the service dispatcher. This will only work if this
* process was launched by the service control manager to
* actually run as a service. If this isn't the case, i've
* on failure.
*
* Parameters :
- * 1 : config = Privoxy configuration. Specifies port
- * to bind to.
+ * 1 : haddr = Host addres to bind to. Use NULL to bind to
+ * INADDR_ANY.
+ * 2 : hport = Specifies port to bind to.
*
* Returns : Port that was opened.
*
*********************************************************************/
-static jb_socket bind_port_helper(struct configuration_spec * config)
+static jb_socket bind_port_helper(const char *haddr, int hport)
{
int result;
jb_socket bfd;
- if (config->haddr == NULL)
+ result = bind_port(haddr, hport, &bfd);
+
+ if (result < 0)
+ {
+ const char *bind_address = (NULL != haddr) ? haddr : "INADDR_ANY";
+ switch(result)
+ {
+ case -3:
+ log_error(LOG_LEVEL_FATAL,
+ "can't bind to %s:%d: There may be another Privoxy "
+ "or some other proxy running on port %d",
+ bind_address, hport, hport);
+
+ case -2:
+ log_error(LOG_LEVEL_FATAL,
+ "can't bind to %s:%d: The hostname is not resolvable",
+ bind_address, hport);
+
+ default:
+ log_error(LOG_LEVEL_FATAL, "can't bind to %s:%d: %E",
+ bind_address, hport);
+ }
+
+ /* shouldn't get here */
+ return JB_INVALID_SOCKET;
+ }
+
+ if (haddr == NULL)
{
log_error(LOG_LEVEL_INFO, "Listening on port %d on all IP addresses",
- config->hport);
+ hport);
}
else
{
log_error(LOG_LEVEL_INFO, "Listening on port %d on IP address %s",
- config->hport, config->haddr);
+ hport, haddr);
}
- result = bind_port(config->haddr, config->hport, &bfd);
+ return bfd;
+}
- if (result < 0)
+
+/*********************************************************************
+ *
+ * Function : bind_ports_helper
+ *
+ * Description : Bind the listen ports. Handles logging, and aborts
+ * on failure.
+ *
+ * Parameters :
+ * 1 : config = Privoxy configuration. Specifies ports
+ * to bind to.
+ * 2 : sockets = Preallocated array of opened sockets
+ * corresponding to specification in config.
+ * All non-opened sockets will be set to
+ * JB_INVALID_SOCKET.
+ *
+ * Returns : Nothing. Inspect sockets argument.
+ *
+ *********************************************************************/
+static void bind_ports_helper(struct configuration_spec * config,
+ jb_socket sockets[])
+{
+ int i;
+
+ for (i = 0; i < MAX_LISTENING_SOCKETS; i++)
{
- switch(result)
+ if (config->hport[i])
{
- case -3 :
- log_error(LOG_LEVEL_FATAL, "can't bind to %s:%d: "
- "There may be another Privoxy or some other "
- "proxy running on port %d",
- (NULL != config->haddr) ? config->haddr : "INADDR_ANY",
- config->hport, config->hport);
-
- case -2 :
- log_error(LOG_LEVEL_FATAL, "can't bind to %s:%d: "
- "The hostname is not resolvable",
- (NULL != config->haddr) ? config->haddr : "INADDR_ANY", config->hport);
-
- default :
- log_error(LOG_LEVEL_FATAL, "can't bind to %s:%d: because %E",
- (NULL != config->haddr) ? config->haddr : "INADDR_ANY", config->hport);
+ sockets[i] = bind_port_helper(config->haddr[i], config->hport[i]);
+ }
+ else
+ {
+ sockets[i] = JB_INVALID_SOCKET;
}
-
- /* shouldn't get here */
- return JB_INVALID_SOCKET;
}
-
config->need_bind = 0;
+}
- return bfd;
+
+/*********************************************************************
+ *
+ * Function : close_ports_helper
+ *
+ * Description : Close listenings ports.
+ *
+ * Parameters :
+ * 1 : sockets = Array of opened and non-opened sockets to
+ * close. All sockets will be set to
+ * JB_INVALID_SOCKET.
+ *
+ * Returns : Nothing.
+ *
+ *********************************************************************/
+static void close_ports_helper(jb_socket sockets[])
+{
+ int i;
+
+ for (i = 0; i < MAX_LISTENING_SOCKETS; i++)
+ {
+ if (JB_INVALID_SOCKET != sockets[i])
+ {
+ close_socket(sockets[i]);
+ }
+ sockets[i] = JB_INVALID_SOCKET;
+ }
}
*********************************************************************/
static void listen_loop(void)
{
+ struct client_states *csp_list = NULL;
struct client_state *csp = NULL;
- jb_socket bfd;
- struct configuration_spec * config;
+ jb_socket bfds[MAX_LISTENING_SOCKETS];
+ struct configuration_spec *config;
+ unsigned int active_threads = 0;
config = load_config();
-#ifdef FEATURE_CONNECTION_KEEP_ALIVE
+#ifdef FEATURE_CONNECTION_SHARING
/*
* XXX: Should be relocated once it no
* longer needs to emit log messages.
*/
initialize_reusable_connections();
-#endif /* def FEATURE_CONNECTION_KEEP_ALIVE */
+#endif /* def FEATURE_CONNECTION_SHARING */
- bfd = bind_port_helper(config);
+ bind_ports_helper(config, bfds);
#ifdef FEATURE_GRACEFUL_TERMINATION
while (!g_terminate)
/*
* Free data that was used by died threads
*/
- sweep();
+ active_threads = sweep();
#if defined(unix)
/*
}
#endif
- if ( NULL == (csp = (struct client_state *) zalloc(sizeof(*csp))) )
+ csp_list = (struct client_states *)zalloc(sizeof(*csp_list));
+ if (NULL == csp_list)
{
- log_error(LOG_LEVEL_FATAL, "malloc(%d) for csp failed: %E", sizeof(*csp));
+ log_error(LOG_LEVEL_FATAL,
+ "malloc(%d) for csp_list failed: %E", sizeof(*csp_list));
continue;
}
+ csp = &csp_list->csp;
+
+ log_error(LOG_LEVEL_CONNECT, "Listening for new connections ... ");
+
+ if (!accept_connection(csp, bfds))
+ {
+ log_error(LOG_LEVEL_CONNECT, "accept failed: %E");
+
+#ifdef AMIGA
+ if (!childs)
+ {
+ exit(1);
+ }
+#endif
+ freez(csp_list);
+ continue;
+ }
+ else
+ {
+ log_error(LOG_LEVEL_CONNECT,
+ "accepted connection from %s on socket %d",
+ csp->ip_addr_str, csp->cfd);
+ }
csp->flags |= CSP_FLAG_ACTIVE;
- csp->sfd = JB_INVALID_SOCKET;
+ csp->server_connection.sfd = JB_INVALID_SOCKET;
csp->config = config = load_config();
- if ( config->need_bind )
+ if (config->need_bind)
{
/*
* Since we were listening to the "old port", we will not see
- * a "listen" param change until the next IJB request. So, at
+ * a "listen" param change until the next request. So, at
* least 1 more request must be made for us to find the new
* setting. I am simply closing the old socket and binding the
* new one.
* that this will hurt people's feelings.
*/
- close_socket(bfd);
+ close_ports_helper(bfds);
- bfd = bind_port_helper(config);
- }
-
- log_error(LOG_LEVEL_CONNECT, "Listening for new connections ... ");
-
- if (!accept_connection(csp, bfd))
- {
- log_error(LOG_LEVEL_CONNECT, "accept failed: %E");
-
-#ifdef AMIGA
- if(!childs)
- {
- exit(1);
- }
-#endif
- freez(csp);
- continue;
- }
- else
- {
- log_error(LOG_LEVEL_CONNECT, "accepted connection from %s", csp->ip_addr_str);
+ bind_ports_helper(config, bfds);
}
#ifdef FEATURE_TOGGLE
#ifdef FEATURE_ACL
if (block_acl(NULL,csp))
{
- log_error(LOG_LEVEL_CONNECT, "Connection from %s dropped due to ACL", csp->ip_addr_str);
+ log_error(LOG_LEVEL_CONNECT,
+ "Connection from %s on socket %d dropped due to ACL", csp->ip_addr_str, csp->cfd);
close_socket(csp->cfd);
- freez(csp);
+ freez(csp->ip_addr_str);
+ freez(csp_list);
continue;
}
#endif /* def FEATURE_ACL */
+ if ((0 != config->max_client_connections)
+ && (active_threads >= config->max_client_connections))
+ {
+ log_error(LOG_LEVEL_CONNECT,
+ "Rejecting connection from %s. Maximum number of connections reached.",
+ csp->ip_addr_str);
+ write_socket(csp->cfd, TOO_MANY_CONNECTIONS_RESPONSE,
+ strlen(TOO_MANY_CONNECTIONS_RESPONSE));
+ close_socket(csp->cfd);
+ freez(csp->ip_addr_str);
+ freez(csp_list);
+ continue;
+ }
+
/* add it to the list of clients */
- csp->next = clients->next;
- clients->next = csp;
+ csp_list->next = clients->next;
+ clients->next = csp_list;
if (config->multi_threaded)
{
int child_id;
-/* this is a switch () statment in the C preprocessor - ugh */
+/* this is a switch () statement in the C preprocessor - ugh */
#undef SELECTED_ONE_OPTION
/* Use Pthreads in preference to native code */
#if defined(AMIGA) && !defined(SELECTED_ONE_OPTION)
#define SELECTED_ONE_OPTION
csp->cfd = ReleaseSocket(csp->cfd, -1);
-
+
#ifdef __amigaos4__
child_id = (int)CreateNewProcTags(NP_Entry, (ULONG)server_thread,
NP_Output, Output(),
NP_StackSize, 200*1024,
TAG_DONE);
#endif
- if(0 != child_id)
+ if (0 != child_id)
{
childs++;
((struct Task *)child_id)->tc_UserData = csp;
serve(csp);
- /*
+ /*
* If we've been toggled or we've blocked the request, tell Mom
*/
}
#endif /* def FEATURE_TOGGLE */
-#ifdef FEATURE_STATISTICS
+#ifdef FEATURE_STATISTICS
if (csp->flags & CSP_FLAG_REJECTED)
{
rc |= RC_FLAG_BLOCKED;
int child_status;
#if !defined(_WIN32) && !defined(__CYGWIN__)
- wait( &child_status );
+ wait(&child_status);
- /*
+ /*
* Evaluate child's return code: If the child has
* - been toggled, toggle ourselves
* - blocked its request, bump up the stats counter
{
urls_rejected++;
}
-#endif /* def FEATURE_STATISTICS */
+#endif /* def FEATURE_STATISTICS */
#endif /* !defined(_WIN32) && defined(__CYGWIN__) */
close_socket(csp->cfd);
#undef SELECTED_ONE_OPTION
/* end of cpp switch () */
- if (child_id < 0) /* failed */
+ if (child_id < 0)
{
- char buf[BUFFER_SIZE];
-
- log_error(LOG_LEVEL_ERROR, "can't fork: %E");
-
- snprintf(buf , sizeof(buf), "Privoxy: can't fork: errno = %d", errno);
-
- write_socket(csp->cfd, buf, strlen(buf));
+ /*
+ * Spawning the child failed, assume it's because
+ * there are too many children running already.
+ * XXX: If you assume ...
+ */
+ log_error(LOG_LEVEL_ERROR,
+ "Unable to take any additional connections: %E");
+ write_socket(csp->cfd, TOO_MANY_CONNECTIONS_RESPONSE,
+ strlen(TOO_MANY_CONNECTIONS_RESPONSE));
close_socket(csp->cfd);
csp->flags &= ~CSP_FLAG_ACTIVE;
- sleep(5);
- continue;
}
}
else
#if defined(unix)
freez(basedir);
#endif
- freez(configfile);
#if defined(_WIN32) && !defined(_WIN_CONSOLE)
/* Cleanup - remove taskbar icon etc. */
projects / privoxy.git / blobdiff