- Announcing Privoxy v.3.0.17 stable
------------------------------------------------------------------
-
-This is mainly a bug-fix release for the previously released Privoxy 3.0.16.
-
-It contains fixes for two bugs that could cause connections to hang under
-certain circumstances when keep-alive support was enabled, until they timed
-out or where closed by the server.
+ Announcing Privoxy 3.0.29 stable
+--------------------------------------------------------------------
-See http://www.privoxy.org/3.0.17/user-manual/whatsnew.html for details.
+Privoxy 3.0.29 stable fixes a couple of memory leaks and introduces
+https inspection which allows to filter encrypted requests and
+responses.
--------------------------------------------------------------------
-ChangeLog for Privoxy
+ChangeLog for Privoxy 3.0.29
--------------------------------------------------------------------
-*** Version 3.0.17 Stable ***
-
-- Fixed last-chunk-detection for responses where the content was small
- enough to be read with the body, causing Privoxy to wait for the
- end of the content until the server closed the connection or the
- request timed out. Reported by "Karsten" in #3028326.
-- Responses with status code 204 weren't properly detected as body-less
- like RFC2616 mandates. Like the previous bug, this caused Privoxy to
- wait for the end of the content until the server closed the connection
- or the request timed out. Fixes #3022042 and #3025553, reported by a
- user with no visible name. Most likely also fixes a bunch of other
- AJAX-related problem reports that got closed in the past due to
- insufficient information and lack of feedback.
-- Fixed an ACL bug that made it impossible to build a blacklist.
- Usually the ACL directives are used in a whitelist, which worked
- as expected, but blacklisting is still useful for public proxies
- where one only needs to deny known abusers access.
-- Added LOG_LEVEL_RECEIVED to log the not-yet-parsed data read from the
- network. This should make debugging various parsing issues a lot easier.
-- The IPv6 code is enabled by default on Windows versions that support it.
- Patch submitted by oCameLo in #2942729.
-- In mingw32 versions, the user.filter file is reachable through the
- GUI, just like default.filter is. Feature request 3040263.
-- Added the configure option --enable-large-file-support to set a few
- defines that are required by platforms like GNU/Linux to support files
- larger then 2GB. Mainly interesting for users without proper logfile
- management.
-- Logging with "debug 16" no longer stops at the first nul byte which is
- pretty useless. Non-printable characters are replaced with their hex value
- so the result can't span multiple lines making parsing them harder then
- necessary.
-- Privoxy logs when reading an action, filter or trust file.
-- Fixed incorrect regression test markup which caused a test in
- 3.0.16 to fail while Privoxy itself was working correctly.
- While Privoxy accepts hide-referer, too, the action name is actually
- hide-referrer which is also the name used one the final results page,
- where the test expected the alias.
-
-- CGI interface improvements:
- - In finish_http_response(), continue to add the 'Connection: close'
- header if the client connection will not be kept alive.
- Anonymously pointed out in #2987454.
- - Apostrophes in block messages no longer cause parse errors
- when the blocked page is viewed with JavaScript enabled.
- Reported by dg1727 in #3062296.
- - Fix a bunch of anchors that used underscores instead of dashes.
- - Allow to keep the client connection alive after crunching the previous request.
- Already opened server connections can be kept alive, too.
- - In cgi_show_url_info(), don't forget to prefix URLs that only contain
- http:// or https:// in the path. Fixes #2975765 reported by Adam Piggott.
- - Show the 404 CGI page if cgi_send_user_manual() is called while
- local user manual delivery is disabled.
+
+- Security/Reliability:
+ - Fixed memory leaks when a response is buffered and the buffer
+ limit is reached or Privoxy is running out of memory.
+ Commits bbd53f1010b and 4490d451f9b. OVE-20201118-0001.
+ Sponsored by: Robert Klemme
+ - Fixed a memory leak in the show-status CGI handler when
+ no action files are configured. Commit c62254a686.
+ OVE-20201118-0002.
+ Sponsored by: Robert Klemme
+ - Fixed a memory leak in the show-status CGI handler when
+ no filter files are configured. Commit 1b1370f7a8a.
+ OVE-20201118-0003.
+ Sponsored by: Robert Klemme
+ - Fixes a memory leak when client tags are active.
+ Commit 245e1cf32. OVE-20201118-0004.
+ Sponsored by: Robert Klemme
+ - Fixed a memory leak if multiple filters are executed
+ and the last one is skipped due to a pcre error.
+ Commit 5cfb7bc8fe. OVE-20201118-0005.
+ - Prevent an unlikely dereference of a NULL-pointer that
+ could result in a crash if accept-intercepted-requests
+ was enabled, Privoxy failed to get the request destination
+ from the Host header and a memory allocation failed.
+ Commit 7530132349. CID 267165. OVE-20201118-0006.
+ - Fixed memory leaks in the client-tags CGI handler when
+ client tags are configured and memory allocations fail.
+ Commit cf5640eb2a. CID 267168. OVE-20201118-0007.
+ - Fixed memory leaks in the show-status CGI handler when memory
+ allocations fail. Commit 064eac5fd0 and commit fdee85c0bf3.
+ CID 305233. OVE-20201118-0008.
+
+- General improvements:
+ - Added experimental https inspection support which allows to filter
+ https traffic. To enable it, install MbedTLS and configure with
+ --with-mbedtls, or install OpenSSL or LibreSSL and configure
+ with --with-openssl.
+ Afterwards configure the directives in section 7 of the
+ config file and enable the +https-inspection action.
+ Initial MbedTLS-based code contributed by Vaclav Svec,
+ initial OpenSSL support contributed by Maxim Antonov.
+ With help from Nedzad Hrnjica and Ho+ Ho+ Ho+.
+ Integration and improvements sponsored by Robert Klemme.
+ - pcrs: Request JIT compilation if it's supported and
+ the filter isn't dynamic. This can speed up filtering.
+ - Added support for Brotli decompression.
+ Sponsored by: Robert Klemme
+ - Added FEATURE_EXTENDED_STATISTICS to gather statistics for
+ block reasons and filter executions. To enable it, configure
+ with --enable-extended-statistics and visit
+ http://config.privoxy.org/show-status.
+ Sponsored by: Robert Klemme
+ - Use the IP_FREEBIND socket option, if defined. This allows
+ Privoxy to bind to not-yet assigned IP addresses which is
+ useful in failover environments.
+ Patch by Sam Varshavchik.
+ - Allow to use extended host patterns and vanilla host patterns
+ at the same time by prefixing extended host patterns with
+ "PCRE-HOST-PATTERN:". To enable this, configure with
+ --enable-pcre-host-patterns.
+ Sponsored by: Robert Klemme
+ - Added "Cross-origin resource sharing" (CORS) support.
+ This allows to access Privoxy's CGI interface via JavaScript from
+ another domain (white-listed with the new cors-allowed-origin directive).
+ Based on a patch by Nedzad Hrnjica.
+ Sponsored by: Robert Klemme.
+ - Add SOCKS5 username/password support.
+ Based on a patch by Sam, improved by Ivan Romanov.
+ Closes Patch#141 and solves TODO#105.
+ - Bump the maximum number of action and filter files
+ to 100 each.
+ Sponsored by: Robert Klemme
+ - Fixed handling of filters with "split-large-forms 1"
+ when using the CGI editor.
+ Reported by withoutname in #921.
+ - Better detect a mismatch of connection details when
+ figuring out whether or not a connection can be reused.
+ - Don't send a "Connection failure" message instead of the
+ "DNS failure" message.
+ Sponsored by: Robert Klemme
+ - Let LOG_LEVEL_REQUEST log all requests. Previously unencrypted
+ requests were only logged with LOG_LEVEL_REQUEST when they weren't
+ crunched (in which case they were logged with LOG_LEVEL_CRUNCH).
+ This was documented behaviour, but logging all requests seems more useful.
+ - Fixed locking around localtime() and gmtime().
+ - Removed OS/2 support. We haven't provided OS/2 packages in years,
+ it complicated the code and it depended on a fallback snprintf()
+ implementation which is GPLv2 only.
+ - Remove the fallback snprintf() implementation
+ Now that OS/2 support is gone we no longer need it.
+ - Fixed a bunch of format specifiers log messages.
+ - Added a missing apostrophe in the 'More Privoxy' menu.
+ - Explicitly prevent use of FEATURE_CONNECTION_SHARING
+ without FEATURE_CONNECTION_KEEP_ALIVE. It makes no sense
+ and does not compile anyway.
+ Sponsored by: Robert Klemme
+ - Fix build without FEATURE_CONNECTION_KEEP_ALIVE.
+ Sponsored by: Robert Klemme
+ - Downgrade the 'Graceful termination requested' message
+ to LOG_LEVEL_INFO as it isn't an error.
+ Sponsored by: Robert Klemme
+ - decompress_iob(): Downgrade the no-content message to LOG_LEVEL_RE_FILTER
+ While at it, fix a typo in a comment.
+ Sponsored by: Robert Klemme
+ - Fixed a couple of cppcheck warnings.
+ - Rename LOG_LEVEL_GPC to LOG_LEVEL_REQUEST.
+ Only the shadow knows what "GPC" is supposed to stand for.
+ - Remove SourceForge references in copyright headers.
+ - Upgrade a bunch of links to the homepage to https://.
+ - Add 'no-brotli-accepted' filter which prevents the
+ use of Brotli compression.
+ - Changed license for pcrs to GPLv2+ after getting the
+ permission from Andreas. This allows to redistribute
+ Privoxy under the GPLv3 which is required when linking
+ to future mbedTLS versions which are expected to be
+ licensed under the Apache 2.0 license only.
+ - Updated a bunch of tests that have to expect status code 403
+ now after r1.168/070e904afa5.
+ - Lowercase the host name in the request line.
+ - Only set SOURCE_DATE_EPOCH if it's not already set so
+ distributions can overwrite it through the environment.
+
+- Documentation changes:
+ - Explain that Privoxy has to be distributed under the
+ GPLv3 (or later) when linked with an MbedTLS version
+ that is licensed under the Apache 2.0 license.
+ - Import the GNU GPLv3 and include it the user manual.
+ - Clarify FEATURE_FORCE_LOAD's description. It allows to bypass
+ blocking not filtering and only does it if blocks aren't enforced.
+ Reported by: Robert Klemme
+ - FAQ: Remove Zwiebelfreunde e.V. from the list of fiduciary sponsors
+ As of 2021 they no longer handle donations for foreign organisations
+ due to lack of resources.
+ - FAQ: Remove an obsolete comment with a link to the long-gone PDF manual.
+ - FAQ: Add a link to the TODO list.
+ - FAQ: Change the sponsor amounts to USD slightly rounding the
+ converted amounts up to get simple numbers.
+ Receiving USD is apparently easier for SPI and SPI is
+ preferred by sponsors as they can send invoices.
+ - Advertise the client-tags CGI page in the user manual.
+ - Stop advertising the show-version CGI page which no longer exists.
+ - Add yet another reason why +prevent-compression may cause problems.
+ - Don't claim that contributors need ssh. It's only needed for committers.
+ - Replace obsolete CVS instructions with Git instructions.
+ - Remove an obsolete comment
+
+- Config file changes:
+ - Change the suggested default-server-timeout to 5 to match the
+ suggested keep-alive-timeout. Otherwise using the defaults would
+ result in Privoxy reducing the default-server-timeout and logging
+ an error message.
+ Sponsored by: Robert Klemme
+ - Update the 'debug 1' description.
+ - Add a missing 'client-specific-tag' directive.
+ - Comment out trusted-cgi-referer pointing to example.org.
- Action file improvements:
- - Enable user.filter by default. Suggested by David White in #3001830.
- - Block .sitestat.com/. Reported by johnd16 in #3002725.
- - Block .atemda.com/. Reported by johnd16 in #3002723.
- - Block js.adlink.net/. Reported by johnd16 in #3002720.
- - Block .analytics.yahoo.com/. Reported by johnd16 in #3002713.
- - Block sb.scorecardresearch.com, too. Reported by dg1727 in #2992652.
- - Fix problems noticed on Yahoo mail and news pages.
- - Remove the too broad yahoo section, only keeping the
- fast-redirects exception as discussed on ijbswa-devel@.
- - Don't block adesklets.sourceforge.net. Reported in #2974204.
- - Block chartbeat ping tracking. Reported in #2975895.
- - Tag CSS and image requests with cautious and medium settings, too.
- - Don't handle view.atdmt.com as image. It's used for click-throughs
- so users should be able to "go there anyway".
- Reported by Adam Piggott in #2975927.
- - Also let the refresh-tags filter remove invalid refresh tags where
- the 'url=' part is missing. Anonymously reported in #2986382.
- While at it, update the description to mention the fact that only
- refresh tags with refresh times above 9 seconds are covered.
- - javascript needs to be blocked with +handle-as-empty-document to
- work around Firefox bug 492459. So move .js blockers from
- +block{Might be a web-bug.} -handle-as-empty-document to
- +block{Might be a web-bug.} +handle-as-empty-document.
- - ijbswa-Feature Requests-3006719 - Block 160x578 Banners.
- - Block another omniture tracking domain.
- - Added a range-requests tagger.
- - Added two sections to get Flickr's Ajax interface working with
- default pre-settings. If you change the configuration to block
- cookies by default, you'll need additional exceptions.
- Reported by Mathias Homann in #3101419 and by Patrick on ijbswa-users@.
-
-- Documentation improvements:
- - Explicitly mention how to match all URLs.
- - Consistently recommend socks5 in the Tor FAQ entry and mention
- its advantage compared to socks4a. Reported by David in #2960129.
- - Slightly improve the explanation of why filtering may appear
- slower than it is.
- - Grammar fixes for the ACL section.
- - Fixed a link to the 'intercepting' entry and add another one.
- - Rename the 'Other' section to 'Mailing Lists' and reword it
- to make it clear that nobody is forced to use the trackers
- - Note that 'anonymously' posting on the trackers may not always
- be possible.
- - Suggest to enable debug 32768 when suspecting parsing problems.
-
-- Privoxy-Log-Parser improvements:
- - Gather statistics for ressources, methods, and HTTP versions
- used by the client.
- - Also gather statistics for blocked and redirected requests.
- - Provide the percentage of keep-alive offers the client accepted.
- - Add a --url-statistics-threshold option.
- - Add a --host-statistics-threshold option to also gather
- statistics about how many request where made per host.
- - Fix a bug in handle_loglevel_header() where a 'scan: ' got lost.
- - Add a --shorten-thread-ids option to replace the thread id with
- a decimal number.
- - Accept and ignore: Looks like we got the last chunk together
- with the server headers. We better stop reading.
- - Accept and ignore: Continue hack in da house.
- - Accept and higlight: Rejecting connection from 10.0.0.2.
- Maximum number of connections reached.
- - Accept and highlight: Loading actions file: /usr/local/etc/privoxy/default.action
- - Accept and highlight: Loading filter file: /usr/local/etc/privoxy/default.filter
- - Accept and highlight: Killed all-caps Host header line: HOST: bestproxydb.com
- - Accept and highlight: Reducing expected bytes to 0. Marking
- the server socket tainted after throwing 4 bytes away.
- - Accept: Merged multiple header lines to: 'X-FORWARDED-PROTO: http X-HOST: 127.0.0.1'
-
-- Code cleanups:
- - Remove the next member from the client_state struct. Only the main
- thread needs access to all client states so give it its own struct.
- - Garbage-collect request_contains_null_bytes().
- - Ditch redundant code in unload_configfile().
- - Ditch LogGetURLUnderCursor() which doesn't seem to be used anywhere.
- - In write_socket(), remove the write-only variable write_len in
- an ifdef __OS2__ block. Spotted by cppcheck.
- - In connect_to(), don't declare the variable 'flags' on OS/2 where
- it isn't used. Spotted by cppcheck.
- - Limit the scope of various variables. Spotted by cppcheck.
- - In add_to_iob(), turn an interestingly looking for loop into a
- boring while loop.
- - Code cleanup in preparation for external filters.
- - In listen_loop(), mention the socket on which we accepted the
- connection, not just the source IP address.
- - In write_socket(), also log the socket we're writing to.
- - In log_error(), assert that escaped characters get logged
- completely or not at all.
- - In log_error(), assert that ival and sval have reasonable values.
- There's no reason not to abort() if they don't.
- - Remove an incorrect cgi_error_unknown() call in a
- cannnot-happen-situation in send_crunch_response().
- - Clean up white-space in http_response definition and
- move the crunch_reason to the beginning.
- - Turn http_response.reason into an enum and rename it
- to http_response.crunch_reason.
- - Silence a 'gcc (Debian 4.3.2-1.1) 4.3.2' warning on i686 GNU/Linux.
- - Fix white-space in a log message in remove_chunked_transfer_coding().
- While at it, add a note that the message doesn't seem to
- be entirely correct and should be improved later on.
-
-- GNUmakefile improvements:
- - Use $(SSH) instead of ssh, so one only needs to specify a username once.
- - Removed references to the action feedback thingy that hasn't been
- working for years.
- - Consistently use shell.sourceforge.net instead of shell.sf.net so
- one doesn't need to check server fingerprints twice.
- - Removed GNUisms in the webserver and webactions targets so they
- work with standard tar.
+ - Block requests to /(.*/)?piwik\.php
+ - Block requests to .connectaserver.de/
+ - Block requests to pixel.inforsea.com/
+ - Block requests to t.vi-serve.com/
+ - Block requests to .ioam.de/
+ - Block requests to t.9gag.com/img.gif
+ - Block requests to .pixel.parsely.com/ as image
+ - Block requests to pixel.wp.com/
+ - Disable fast-redirects for .librarything.com/
+ - Disable fast-redirects for issue.freebsdfoundation.org/
+ - Disable fast-redirects for .twitter.com/.*origin=http
+ - Unblock belco24.de/
+ - Add fast-redirects exception for .wikipedia.org/
+ - Add fast-redirects exception for oss-fuzz.com/
+ - Disable fast-redirects for .consensu.org/delivery/pixel\.php
+ and block the requests as image instead
+ - Unblock .adbinstaller.com/
+ Reported by lvm in #942.
+ - Unblock .adbshell.com
+ Reported by lvm in #942.
+ - Unblock .tagesschau.de/
+ - Disable fast-redirects for collector.githubapp.com/
+ and block requests to it as image instead
+ - Unblock 'ada*.'
+ - Add fast-redirects{} exception for sourcepoint.vice.com/
+ - Unblock adaway.org/
+ Reported by DRS David Soft in AF#945.
+ - Change two block reasons that previously were the same.
+ Sponsored by: Robert Klemme
+ - Added a +delay-response{} test.
+ - Updated the location of the development version
+ of default.action.master.
+
+- Privoxy-Log-Parser:
+ - Added a --keep-date option to keep the date in highlighted messages.
+ - Highlight new log messages.
+ - Make gather_loglevel_clf_stats() more tolerant. While at it,
+ count all CLF messages as requests, even if the request is invalid.
+ - Only show HTTP version distribution if at least one version has been detected.
+ - Only show crunch statistics if crunches were detected.
+ - Warn if the request counts differ.
+ - Generate statistics if the log only contains LOG_LEVEL_CLF messages
+ so it can be used with vanilla webserver logs.
+ Previously Privoxy-specific "Request:" messages were required.
+ - Align the client-HTTP-version distribution like other distributions
+ - Bump version to 0.9.1
+ - Include status code distribution in the stats.
+ - Let the statistics include the size of the content Privoxy
+ transferred excluding HTTP headers.
+ - Get with the program and expect all requests to be logged with LOG_LEVEL_REQUEST.
+ It's no longer necessary to count both LOG_LEVEL_REQUEST and
+ LOG_LEVEL_CRUNCH messages to get the total number of requests.
+ - Leverage the LOG_LEVEL_CLF message to gather statistics that where
+ previously taken from LOG_LEVEL_HEADER lines. This results in less
+ confusing results if https inspection is enabled in which case there
+ are two LOG_LEVEL_HEADER lines with request lines.
+ Sponsored by: Robert Klemme
+ - Properly highlight the filter results message. Previously a brace got lost.
+ - Prefer the number of CLF lines to get the total number of requests
+ as it works with older Privoxy versions as well.
+
+- Privoxy-Regression-Test:
+ - Turn curl's globbing mode off so we can allow more characters in URLs.
+ - Allow '[' and ']' in URLs.
+ - Include the action file when complaining about missing Sticky Actions.
+ - Fix a sentence in the documentation.
+ - Bump version to 0.7.1
+
+- url-pattern-translator:
+ - Detect a couple of pattern prefixes case-insensitively.
+ Sponsored by: Robert Klemme
+ - Skip CLIENT-TAG patterns.
+ Sponsored by: Robert Klemme
+ - Skip patterns that have already been converted.
+ It should now be safe to "convert" a file multiple times.
+ Sponsored by: Robert Klemme
+ - Add the new 'PCRE-HOST-PATTERN:' prefix.
+ Sponsored by: Robert Klemme
+
-----------------------------------------------------------------
About Privoxy:
Privoxy is Free Software and licensed under the GNU GPLv2.
-Privoxy is an associated project of Software in the Public Interest (SPI).
-
-Helping hands and donations are welcome:
+Our TODO list is rather long. Helping hands and donations are welcome:
- * http://www.privoxy.org/faq/general.html#PARTICIPATE
+ * https://www.privoxy.org/faq/general.html#PARTICIPATE
- * http://www.privoxy.org/faq/general.html#DONATE
+ * https://www.privoxy.org/faq/general.html#DONATE
-At present, Privoxy is known to run on Windows(95, 98, ME, 2000,
-XP, Vista), Linux (Ubuntu, RedHat, SuSE, Debian, Fedora, Gentoo and
-others), Mac OSX, OS/2, AmigaOS, FreeBSD, NetBSD, OpenBSD, Solaris, and
-various other flavors of Unix.
+At present, Privoxy is known to run on Windows 95 and later versions
+(98, ME, 2000, XP, Vista, Windows 7 etc.), GNU/Linux (RedHat, SuSE,
+Debian, Fedora, Gentoo, Slackware and others), Mac OS X (10.4 and
+upwards on PPC and Intel processors), Haiku, DragonFly, ElectroBSD,
+FreeBSD, NetBSD, OpenBSD, Solaris, and various other flavors of Unix.
In addition to the core features of ad blocking and cookie management,
Privoxy provides many supplemental features, that give the end-user
more control, more privacy and more freedom:
+ * Supports "Connection: keep-alive". Outgoing connections can be kept
+ alive independently from the client. Currently not available on all
+ platforms.
- * Supports "Connection: keep-alive". Outgoing connections can be kept
- alive independently from the client. Currently not available on all
- platforms.
+ * Supports IPv6, provided the operating system does so too,
+ and the configure script detects it.
- * Supports IPv6, provided the operating system does so too,
- and the configure script detects it.
+ * Supports tagging which allows to change the behaviour based on client
+ and server headers.
- * Supports tagging which allows to change the behaviour based on client
- and server headers.
+ * Supports https inspection which allows to filter https requests.
- * Can be run as an "intercepting" proxy, which obviates the need to
- configure browsers individually.
+ * Can be run as an "intercepting" proxy, which obviates the need to
+ configure browsers individually.
- * Sophisticated actions and filters for manipulating both server and
- client headers.
+ * Sophisticated actions and filters for manipulating both server and
+ client headers.
- * Can be chained with other proxies.
+ * Can be chained with other proxies.
- * Integrated browser based configuration and control utility at
- http://config.privoxy.org/ (shortcut: http://p.p/). Browser-based
- tracing of rule and filter effects. Remote toggling.
+ * Integrated browser based configuration and control utility at
+ http://config.privoxy.org/ (shortcut: http://p.p/). Browser-based
+ tracing of rule and filter effects. Remote toggling.
- * Web page filtering (text replacements, removes banners based on size,
- invisible <quote>web-bugs</quote> and HTML annoyances, etc.)
+ * Web page filtering (text replacements, removes banners based on size,
+ invisible "web-bugs" and HTML annoyances, etc.)
- * Modularized configuration that allows for standard settings and user
- settings to reside in separate files, so that installing updated actions
- files won't overwrite individual user settings.
+ * Modularized configuration that allows for standard settings and user
+ settings to reside in separate files, so that installing updated actions
+ files won't overwrite individual user settings.
- * Support for Perl Compatible Regular Expressions in the configuration
- files, and a more sophisticated and flexible configuration syntax.
+ * Support for Perl Compatible Regular Expressions in the configuration
+ files, and a more sophisticated and flexible configuration syntax.
- * GIF de-animation.
+ * GIF de-animation.
- * Bypass many click-tracking scripts (avoids script redirection).
+ * Bypass many click-tracking scripts (avoids script redirection).
- * User-customizable HTML templates for most proxy-generated pages (e.g.
- "blocked" page).
+ * User-customizable HTML templates for most proxy-generated pages (e.g.
+ "blocked" page).
- * Auto-detection and re-reading of config file changes.
-
- * Most features are controllable on a per-site or per-location basis.
+ * Auto-detection and re-reading of config file changes.
+ * Most features are controllable on a per-site or per-location basis.
-Download location:
- http://sourceforge.net/project/showfiles.php?group_id=11118
-
-Home Page:
- http://www.privoxy.org/
+Home Page:
+ https://www.privoxy.org/
- - Privoxy Developers <ijbswa-developers@lists.sourceforge.net>
+ - Privoxy Developers <privoxy-devel@lists.privoxy.org>
projects / privoxy.git / blobdiff