- Announcing Privoxy v.3.0.17 stable
------------------------------------------------------------------
+ Announcing Privoxy 3.0.28 stable
+--------------------------------------------------------------------
-This is mainly a bug-fix release for the previously released Privoxy 3.0.16.
+Privoxy 3.0.27 stable scales better in multi-user environments
+and brings a couple of tuning directives.
-It contains fixes for two bugs that could cause connections to hang under
-certain circumstances when keep-alive support was enabled, until they timed
-out or where closed by the server.
+Privoxy 3.0.28 stable fixes two regressions introduced in 3.0.27.
-See http://www.privoxy.org/3.0.17/user-manual/whatsnew.html for details.
+--------------------------------------------------------------------
+ChangeLog for Privoxy 3.0.28
+--------------------------------------------------------------------
+- Bug fixes for regressions in 3.0.27:
+ - Fixed misplaced parentheses.
+ Reported by David Binderman.
+ - Changed two regression tests to depend on config directive
+ enable-remote-toggle instead of FEATURE_TOGGLE.
--------------------------------------------------------------------
-ChangeLog for Privoxy
+ChangeLog for Privoxy 3.0.27
--------------------------------------------------------------------
-*** Version 3.0.17 Stable ***
-
-- Fixed last-chunk-detection for responses where the content was small
- enough to be read with the body, causing Privoxy to wait for the
- end of the content until the server closed the connection or the
- request timed out. Reported by "Karsten" in #3028326.
-- Responses with status code 204 weren't properly detected as body-less
- like RFC2616 mandates. Like the previous bug, this caused Privoxy to
- wait for the end of the content until the server closed the connection
- or the request timed out. Fixes #3022042 and #3025553, reported by a
- user with no visible name. Most likely also fixes a bunch of other
- AJAX-related problem reports that got closed in the past due to
- insufficient information and lack of feedback.
-- Fixed an ACL bug that made it impossible to build a blacklist.
- Usually the ACL directives are used in a whitelist, which worked
- as expected, but blacklisting is still useful for public proxies
- where one only needs to deny known abusers access.
-- Added LOG_LEVEL_RECEIVED to log the not-yet-parsed data read from the
- network. This should make debugging various parsing issues a lot easier.
-- The IPv6 code is enabled by default on Windows versions that support it.
- Patch submitted by oCameLo in #2942729.
-- In mingw32 versions, the user.filter file is reachable through the
- GUI, just like default.filter is. Feature request 3040263.
-- Added the configure option --enable-large-file-support to set a few
- defines that are required by platforms like GNU/Linux to support files
- larger then 2GB. Mainly interesting for users without proper logfile
- management.
-- Logging with "debug 16" no longer stops at the first nul byte which is
- pretty useless. Non-printable characters are replaced with their hex value
- so the result can't span multiple lines making parsing them harder then
- necessary.
-- Privoxy logs when reading an action, filter or trust file.
-- Fixed incorrect regression test markup which caused a test in
- 3.0.16 to fail while Privoxy itself was working correctly.
- While Privoxy accepts hide-referer, too, the action name is actually
- hide-referrer which is also the name used one the final results page,
- where the test expected the alias.
-
-- CGI interface improvements:
- - In finish_http_response(), continue to add the 'Connection: close'
- header if the client connection will not be kept alive.
- Anonymously pointed out in #2987454.
- - Apostrophes in block messages no longer cause parse errors
- when the blocked page is viewed with JavaScript enabled.
- Reported by dg1727 in #3062296.
- - Fix a bunch of anchors that used underscores instead of dashes.
- - Allow to keep the client connection alive after crunching the previous request.
- Already opened server connections can be kept alive, too.
- - In cgi_show_url_info(), don't forget to prefix URLs that only contain
- http:// or https:// in the path. Fixes #2975765 reported by Adam Piggott.
- - Show the 404 CGI page if cgi_send_user_manual() is called while
- local user manual delivery is disabled.
+- General improvements:
+ - Add a receive-buffer-size directive which can be used to
+ set the size of the previously statically allocated buffer
+ in handle_established_connection().
+ Increasing the buffer size increases Privoxy's memory usage but
+ can lower the number of context switches and thereby reduce the
+ CPU usage and potentially increase the throughput.
+ This is mostly relevant for fast network connections and
+ large downloads that don't require filtering.
+ Sponsored by: Robert Klemme
+ - Add a listen-backlog directive which specifies the backlog
+ value passed to listen().
+ Sponsored by: Robert Klemme
+ - Add an enable-accept-filter directive which allows to
+ toggle accept filter support at run time when compiled
+ with FEATURE_ACCEPT_FILTER support.
+ It makes testing more convenient and now that it's
+ optional we can emit an error message if enabling
+ the accept filter fails.
+ Sponsored by: Robert Klemme
+ - Add a delay-response{} action.
+ This is useful to tar pit JavaScript requests that
+ are endlessly retried in case of blocks. It can also
+ be used to simulate a slow Internet connection.
+ Sponsored by: Robert Klemme
+ - Add a 'trusted-cgi-referrer' directive.
+ It allows to configure another page or site that can be used
+ to reach sensitive CGI resources.
+ Sponsored by: Robert Klemme
+ - Add a --fuzz mode which exposes Privoxy internals to input
+ from files or stdout.
+ Mainly tested with American Fuzzy Lop. For details see:
+ https://www.fabiankeil.de/talks/fuzzing-on-freebsd/
+ This work was partially funded with donations and done
+ as part of the Privoxy month in 2015.
+ - Consistently use the U(ngreedy) flag in the 'img-reorder' filter.
+ - listen_loop(): Reuse a single thread attribute object
+ The object doesn't change and creating a new one for
+ every thread is a waste of (CPU) time.
+ Sponsored by: Robert Klemme
+ - Free csp resources in the thread that belongs to the csp instead
+ of the main thread which has enough on its plate already.
+ Sponsored by: Robert Klemme
+ - Improve 'socket timeout reached' message.
+ Log the timeout that was triggered and downgrade the
+ log level to LOG_LEVEL_CONNECT to reduce the log noise
+ with common debug settings.
+ The timeout isn't necessary the result of an error and
+ usually merely indicates that Privoxy's socket timeout
+ is lower than the relevant timeouts used by client and
+ server.
+ Sponsored by: Robert Klemme
+ - Explicitly taint the server socket in case of CONNECT requests.
+ This doesn't fix any known problems, but makes
+ some log messages less confusing.
+ - Let write_pid_file() terminate if the pid file can't be opened.
+ Logging the issue at info level is unlikely to help.
+ - log_error(): Reduce the mutex-protected area by not using a
+ heap-allocated buffer that is shared between all threads.
+ This increases performance and reduces the latency with
+ verbose debug settings and multiple concurrent connections.
+ Sponsored by: Robert Klemme
+ - Let zalloc() use calloc() if it's available.
+ In some situations using calloc() can be faster than
+ malloc() + memset() and it should never be slower.
+ In the real world the impact of this change is not
+ expected to be noticeable.
+ Sponsored by: Robert Klemme
+ - Never use select() when poll() is available.
+ On most platforms select() is limited by FD_SETSIZE while
+ poll() is not. This was a scaling issue for multi-user setups.
+ Using poll() has no downside other than the usual risk
+ that code modifications may introduce new bugs that have
+ yet to be found and fixed.
+ At least in theory this commit could also reduce the latency
+ when there are lots of connections and select() would use
+ "bit fields in arrays of integers" to store file descriptors.
+ Another side effect is that Privoxy no longer has to stop
+ monitoring the client sockets when pipelined requests are
+ waiting but can't be read yet.
+ This code keeps the select()-based code behind ifdefs for
+ now but hopefully it can be removed soonish to make the
+ code more readable.
+ Sponsored by: Robert Klemme
+ - Add a 'reproducible-tarball-dist' target.
+ It's currently separate from the "tarball-dist" target
+ because it requires a tar implementation with mtree spec
+ support.
+ It's far from being perfect and does not enforce a
+ reproducible mode, but it's better than nothing.
+ - Use arc4random() if it's available.
+ While Privoxy doesn't need high quality pseudo-random numbers
+ there's no reason not to use them when we can and this silences
+ a warning emitted by code checkers that can't tell whether or not
+ the quality matters.
+ - Show the FEATURE_EXTERNAL_FILTERS status on the status page.
+ Better late than never. Previously a couple of tests weren't
+ executed as Privoxy-Regression-Test couldn't detect that the
+ FEATURE_EXTERNAL_FILTERS dependency was satisfied.
+ - Ditch FEATURE_IMAGE_DETECT_MSIE.
+ It's an obsolete workaround we inherited from Junkbuster
+ and was already disabled by default.
+ Users that feel the urge to work around issues with
+ image requests coming from an Internet Explorer version
+ from more than 15 years ago can still do this using tags.
+ - Consistently use strdup_or_die() instead of strdup() in
+ cases where allocation failures aren't expected.
+ Using strdup_or_die() allows to remove a couple of explicit
+ error checks which slightly reduces the size of the binary.
+ - Insert a refresh tag into the /client-tags CGI page when
+ serving it while a client-specific tag is temporarily enabled.
+ This makes it less likely that the user ends up
+ looking at tag state that is out of date.
+ - Use absolute URLs in the client-tag forms.
+ It's more consistent with the rest of the CGI page
+ URLs and makes it more convenient to copy the forms
+ to external pages.
+ - cgi_error_disabled(): Use status code 403 and an appropriate response line
+ - Use a dedicated CGI handler to deal with tag-toggle requests
+ As a result the /client-tags page is now safe to reach without
+ trusted Referer header which makes bookmarking or linking to
+ it more convenient.
+ Finally, refreshing the /client-tags page to show the
+ current state can no longer unintentionally repeat the
+ previous toggle request.
+ - Don't add a "Connection" header for CONNECT requests.
+ Explicitly sending "Connection: close" is not necessary and
+ apparently it causes problems with some forwarding proxies
+ that will close the connection prematurely.
+ Reported by Marc Thomas.
+ - Fix compiler warnings.
+
+- Bug fixes:
+ - rfc2553_connect_to(): Properly detect and log when poll()
+ reached the time out. Previously this was logged as:
+ Could not connect to [...]: No error: 0.
+ which isn't very helpful.
+ Sponsored by: Robert Klemme
+ - add_tag_for_client(): Set time_to_live properly.
+ Previously the time_to_live was always set for the first tag.
+ Attempts to temporarily enable a tag would result in enabling
+ it permanently unless no tag was enabled already.
+ - Revert r1.165 which didn't perform as advertised.
+ While the idea was to use "https:// when creating links
+ for the user manual on the website", the actual effect
+ was to use "https://" when Privoxy was supposed to serve
+ the user manual itself.
+ Reported by Yossi Zahn on Privoxy-devel@.
+ - socks5_connect(): Fail in case of unsupported address types.
+ Previously they would not be detected right away and
+ Privoxy would fail later on with an error message that
+ didn't make it obvious that the problem was socks-related.
+ So far, no such problems have actually been reported.
+ - socks5_connect(): Properly deal with socks replies that
+ contain IPv6 addresses.
+ Previously parts of the reply were left unread and
+ later on treated as invalid HTTP response data.
+ Fixes #904 reported by Danny Goossen who also provided
+ the initial version of this patch.
- Action file improvements:
- - Enable user.filter by default. Suggested by David White in #3001830.
- - Block .sitestat.com/. Reported by johnd16 in #3002725.
- - Block .atemda.com/. Reported by johnd16 in #3002723.
- - Block js.adlink.net/. Reported by johnd16 in #3002720.
- - Block .analytics.yahoo.com/. Reported by johnd16 in #3002713.
- - Block sb.scorecardresearch.com, too. Reported by dg1727 in #2992652.
- - Fix problems noticed on Yahoo mail and news pages.
- - Remove the too broad yahoo section, only keeping the
- fast-redirects exception as discussed on ijbswa-devel@.
- - Don't block adesklets.sourceforge.net. Reported in #2974204.
- - Block chartbeat ping tracking. Reported in #2975895.
- - Tag CSS and image requests with cautious and medium settings, too.
- - Don't handle view.atdmt.com as image. It's used for click-throughs
- so users should be able to "go there anyway".
- Reported by Adam Piggott in #2975927.
- - Also let the refresh-tags filter remove invalid refresh tags where
- the 'url=' part is missing. Anonymously reported in #2986382.
- While at it, update the description to mention the fact that only
- refresh tags with refresh times above 9 seconds are covered.
- - javascript needs to be blocked with +handle-as-empty-document to
- work around Firefox bug 492459. So move .js blockers from
- +block{Might be a web-bug.} -handle-as-empty-document to
- +block{Might be a web-bug.} +handle-as-empty-document.
- - ijbswa-Feature Requests-3006719 - Block 160x578 Banners.
- - Block another omniture tracking domain.
- - Added a range-requests tagger.
- - Added two sections to get Flickr's Ajax interface working with
- default pre-settings. If you change the configuration to block
- cookies by default, you'll need additional exceptions.
- Reported by Mathias Homann in #3101419 and by Patrick on ijbswa-users@.
+ - Unblock 'msdn.microsoft.com/'.
+ It (presumably) isn't used to serve the kind of ads Privoxy should
+ block by default but happens to serve lots of pages with URLs that
+ are likely to result in false positives.
+ Reported by bugreporter1694 in AF#939.
+ - Disable gif deanimation for requests tagged with CSS-REQUEST.
+ The action will ignore content that isn't considered text
+ anyway and explicitly disabling it makes this more obvious
+ if "action" debugging (debug 65536) is enabled while
+ "gif deanimation" debugging (debug 256) isn't.
+ - Explicitly disable HTML filters for requests with CSS-REQUEST tag.
+ The filters are unlikely to break CSS files but executing
+ them without (intentionally) getting any hits is a waste of
+ cpu time and makes the log more noisy when running with
+ "debug 64".
+ - Unblock 'adventofcode.com/'.
+ Reported by Clint Adams in Debian bug #848211.
+ Fixes Roland's AF#937.
+ - Unblock 'adlibris.com'.
+ Reported by Wyrex in #935
+ - Unblock .golang.org/
+ - Add fast-redirects exception for '.youtube.com/.*origin=http'
+
+- Privoxy-Log-Parser:
+ - Don't gather host and resource statistics if they aren't requested.
+ While the performance impact seems negligible this significantly
+ reduces the memory usage if there are lots of requests.
+ - Bump version as the behaviour (slightly) changed.
+ - Count connection failures as well in statistics mode.
+ Sponsored by: Robert Klemme
+ - Count connection timeouts as well in statistics mode.
+ Sponsored by: Robert Klemme
+ - Fix an 'uninitialized value' warning when generating
+ statistics for a log file without response headers.
+ While privoxy-log-parser was supposed to detect this already,
+ the check was flawed and the message the user didn't see was
+ somewhat confusing anyway.
+ Now the message is less confusing, more helpful and actually printed.
+ Reported by: Robert Klemme
- Documentation improvements:
- - Explicitly mention how to match all URLs.
- - Consistently recommend socks5 in the Tor FAQ entry and mention
- its advantage compared to socks4a. Reported by David in #2960129.
- - Slightly improve the explanation of why filtering may appear
- slower than it is.
- - Grammar fixes for the ACL section.
- - Fixed a link to the 'intercepting' entry and add another one.
- - Rename the 'Other' section to 'Mailing Lists' and reword it
- to make it clear that nobody is forced to use the trackers
- - Note that 'anonymously' posting on the trackers may not always
- be possible.
- - Suggest to enable debug 32768 when suspecting parsing problems.
-
-- Privoxy-Log-Parser improvements:
- - Gather statistics for resources, methods, and HTTP versions
- used by the client.
- - Also gather statistics for blocked and redirected requests.
- - Provide the percentage of keep-alive offers the client accepted.
- - Add a --url-statistics-threshold option.
- - Add a --host-statistics-threshold option to also gather
- statistics about how many request where made per host.
- - Fix a bug in handle_loglevel_header() where a 'scan: ' got lost.
- - Add a --shorten-thread-ids option to replace the thread id with
- a decimal number.
- - Accept and ignore: Looks like we got the last chunk together
- with the server headers. We better stop reading.
- - Accept and ignore: Continue hack in da house.
- - Accept and highlight: Rejecting connection from 10.0.0.2.
- Maximum number of connections reached.
- - Accept and highlight: Loading actions file: /usr/local/etc/privoxy/default.action
- - Accept and highlight: Loading filter file: /usr/local/etc/privoxy/default.filter
- - Accept and highlight: Killed all-caps Host header line: HOST: bestproxydb.com
- - Accept and highlight: Reducing expected bytes to 0. Marking
- the server socket tainted after throwing 4 bytes away.
- - Accept: Merged multiple header lines to: 'X-FORWARDED-PROTO: http X-HOST: 127.0.0.1'
-
-- Code cleanups:
- - Remove the next member from the client_state struct. Only the main
- thread needs access to all client states so give it its own struct.
- - Garbage-collect request_contains_null_bytes().
- - Ditch redundant code in unload_configfile().
- - Ditch LogGetURLUnderCursor() which doesn't seem to be used anywhere.
- - In write_socket(), remove the write-only variable write_len in
- an ifdef __OS2__ block. Spotted by cppcheck.
- - In connect_to(), don't declare the variable 'flags' on OS/2 where
- it isn't used. Spotted by cppcheck.
- - Limit the scope of various variables. Spotted by cppcheck.
- - In add_to_iob(), turn an interestingly looking for loop into a
- boring while loop.
- - Code cleanup in preparation for external filters.
- - In listen_loop(), mention the socket on which we accepted the
- connection, not just the source IP address.
- - In write_socket(), also log the socket we're writing to.
- - In log_error(), assert that escaped characters get logged
- completely or not at all.
- - In log_error(), assert that ival and sval have reasonable values.
- There's no reason not to abort() if they don't.
- - Remove an incorrect cgi_error_unknown() call in a
- cannnot-happen-situation in send_crunch_response().
- - Clean up white-space in http_response definition and
- move the crunch_reason to the beginning.
- - Turn http_response.reason into an enum and rename it
- to http_response.crunch_reason.
- - Silence a 'gcc (Debian 4.3.2-1.1) 4.3.2' warning on i686 GNU/Linux.
- - Fix white-space in a log message in remove_chunked_transfer_coding().
- While at it, add a note that the message doesn't seem to
- be entirely correct and should be improved later on.
-
-- GNUmakefile improvements:
- - Use $(SSH) instead of ssh, so one only needs to specify a username once.
- - Removed references to the action feedback thingy that hasn't been
- working for years.
- - Consistently use shell.sourceforge.net instead of shell.sf.net so
- one doesn't need to check server fingerprints twice.
- - Removed GNUisms in the webserver and webactions targets so they
- work with standard tar.
+ - Refer to the git sources instead of CVS.
+ - Use GNU/Linux when referring to the OS instead of the kernel.
+ - Add FAQ entry for what to do if editing the config file is access denied.
+ - Add brief HTTP/2 FAQ.
+ - Add a small fuzzing section to the developer documentation.
+ - Add a client-header-tagger{client-ip-address} example.
+ - Stop suggesting that Privoxy is an anonymizing proxy.
+ The term could lead to Privoxy users overestimating
+ what it can do on its own (without Tor).
+ - Make it more obvious that SPI accepts Paypal, too.
+ Currently most donations are made through the Paypal account
+ managed by Zwiebelfreunde e.V. and a more even distribution
+ would be useful.
+ - Suggest to log applying actions as well when reproducing problems.
+ - Explicitly mention that Privoxy binaries are built by individuals
+ on their own systems. Buyer beware!
+ - Mention the release feed on the homepage.
+ - Remove a mysterious comment with a GNU FDL link as it isn't
+ useful and could confuse license scanners.
+ In May 2002 it was briefly claimed that "this document" was covered
+ by the GNU FDL. The commit message (r1.5) doesn't explain the motivation
+ or whether all copyright holders were actually asked and agreed to the
+ declared license change.
+ It's thus hard to tell whether or not the license change was legit,
+ but luckily two days later the "doc license" was "put" "back to GPL"
+ anyway (r1.6).
+ At the same time the offending comment with a link to the FDL
+ (not the GPL) was added for no obvious reason.
+ Now it's gone again.
+
+- Regression tests:
+ - Bump for-privoxy-version to 3.0.27 as we now rely on untrusted
+ CGI request being rejected with status code 403 (instead of 200).
+ - Update test for /send-stylesheet and add another one
+
+- Templates:
+ - Consistently use https:// when linking to the Privoxy website.
+ - Remove SourceForge references in Copyright header.
+ - Remove a couple of SourceForge references in a comment.
+ While at it, fix the grammar.
+ - Move the site-specific documentation block before the generic one.
+ While most Privoxy installations don't have a site-specific
+ documentation block, in cases were it exists it's likely to
+ be more relevant than the generic one.
+ Showing it first makes it less likely that users stop reading
+ before they reach it, especially on pages that don't fit on
+ the screen.
+
+- Build system improvements:
+ - Prefer openjade to jade. On some systems Jade produces
+ HTML with unescaped ampersands in URLs.
+ - Prefer OpenSP to SP to be consistent.
+ - Have Docbook generated HTML files be straight ASCII.
+ Dealing with a mixture of ISO-8859 and UTF-8 files is problematic.
+ - Echo the filename to stderr for 'make dok-tidy'.
+ Make it a bit easier to find errors in docbook generated HTML.
+ - Warn when still using select().
+ - Warn when compiling without calloc().
+ - Make it more obvious that the --with-fdsetsize configure switch
+ is pointless if poll() is available.
+ - Remove support for AmigaOS.
+ - Update windows build system to use supported software.
+ The cygwin gcc -mno-cygwin option is no longer supported, so
+ convert the windows build system to use the cygwin cross-compiler
+ to build "native" code.
+ - Add --enable-static-linking option for configure
+ does the same thing as LDFLAGS=-static; ./configure
+ but nicer than mixing evars and configure options.
-----------------------------------------------------------------
About Privoxy:
Privoxy is Free Software and licensed under the GNU GPLv2.
-Privoxy is an associated project of Software in the Public Interest (SPI).
-
-Helping hands and donations are welcome:
+Our TODO list is rather long. Helping hands and donations are welcome:
- * http://www.privoxy.org/faq/general.html#PARTICIPATE
+ * https://www.privoxy.org/faq/general.html#PARTICIPATE
- * http://www.privoxy.org/faq/general.html#DONATE
+ * https://www.privoxy.org/faq/general.html#DONATE
-At present, Privoxy is known to run on Windows(95, 98, ME, 2000,
-XP, Vista), GNU/Linux (Ubuntu, RedHat, SuSE, Debian, Fedora, Gentoo and
-others), Mac OSX, OS/2, AmigaOS, FreeBSD, NetBSD, OpenBSD, Solaris, and
-various other flavors of Unix.
+At present, Privoxy is known to run on Windows 95 and later versions
+(98, ME, 2000, XP, Vista, Windows 7 etc.), GNU/Linux (RedHat, SuSE,
+Debian, Fedora, Gentoo, Slackware and others), Mac OS X (10.4 and
+upwards on PPC and Intel processors), OS/2, Haiku, DragonFly, ElectroBSD,
+FreeBSD, NetBSD, OpenBSD, Solaris, and various other flavors of Unix.
In addition to the core features of ad blocking and cookie management,
Privoxy provides many supplemental features, that give the end-user
more control, more privacy and more freedom:
+ * Supports "Connection: keep-alive". Outgoing connections can be kept
+ alive independently from the client. Currently not available on all
+ platforms.
- * Supports "Connection: keep-alive". Outgoing connections can be kept
- alive independently from the client. Currently not available on all
- platforms.
+ * Supports IPv6, provided the operating system does so too,
+ and the configure script detects it.
- * Supports IPv6, provided the operating system does so too,
- and the configure script detects it.
+ * Supports tagging which allows to change the behaviour based on client
+ and server headers.
- * Supports tagging which allows to change the behaviour based on client
- and server headers.
+ * Can be run as an "intercepting" proxy, which obviates the need to
+ configure browsers individually.
- * Can be run as an "intercepting" proxy, which obviates the need to
- configure browsers individually.
+ * Sophisticated actions and filters for manipulating both server and
+ client headers.
- * Sophisticated actions and filters for manipulating both server and
- client headers.
+ * Can be chained with other proxies.
- * Can be chained with other proxies.
+ * Integrated browser based configuration and control utility at
+ http://config.privoxy.org/ (shortcut: http://p.p/). Browser-based
+ tracing of rule and filter effects. Remote toggling.
- * Integrated browser based configuration and control utility at
- http://config.privoxy.org/ (shortcut: http://p.p/). Browser-based
- tracing of rule and filter effects. Remote toggling.
+ * Web page filtering (text replacements, removes banners based on size,
+ invisible "web-bugs" and HTML annoyances, etc.)
- * Web page filtering (text replacements, removes banners based on size,
- invisible <quote>web-bugs</quote> and HTML annoyances, etc.)
+ * Modularized configuration that allows for standard settings and user
+ settings to reside in separate files, so that installing updated actions
+ files won't overwrite individual user settings.
- * Modularized configuration that allows for standard settings and user
- settings to reside in separate files, so that installing updated actions
- files won't overwrite individual user settings.
+ * Support for Perl Compatible Regular Expressions in the configuration
+ files, and a more sophisticated and flexible configuration syntax.
- * Support for Perl Compatible Regular Expressions in the configuration
- files, and a more sophisticated and flexible configuration syntax.
+ * GIF de-animation.
- * GIF de-animation.
+ * Bypass many click-tracking scripts (avoids script redirection).
- * Bypass many click-tracking scripts (avoids script redirection).
+ * User-customizable HTML templates for most proxy-generated pages (e.g.
+ "blocked" page).
- * User-customizable HTML templates for most proxy-generated pages (e.g.
- "blocked" page).
-
- * Auto-detection and re-reading of config file changes.
-
- * Most features are controllable on a per-site or per-location basis.
+ * Auto-detection and re-reading of config file changes.
+ * Most features are controllable on a per-site or per-location basis.
-Download location:
- http://sourceforge.net/project/showfiles.php?group_id=11118
-
-Home Page:
- http://www.privoxy.org/
+Home Page:
+ https://www.privoxy.org/
- - Privoxy Developers <ijbswa-developers@lists.sourceforge.net>
+ - Privoxy Developers <privoxy-devel@lists.privoxy.org>
projects / privoxy.git / blobdiff