- Announcing Privoxy 3.0.22 stable
+ Announcing Privoxy 3.0.28 stable
--------------------------------------------------------------------
-Privoxy 3.0.22 stable is mainly a bug-fix release, it also has a
-couple of new features, though. Note that the first two entries in
-the ChangeLog below refer to security issues.
+Privoxy 3.0.27 stable scales better in multi-user environments
+and brings a couple of tuning directives.
+
+Privoxy 3.0.28 stable fixes two regressions introduced in 3.0.27.
--------------------------------------------------------------------
-ChangeLog for Privoxy
+ChangeLog for Privoxy 3.0.28
--------------------------------------------------------------------
-*** Version 3.0.22 stable ***
-
-- Bug fixes:
- - Fixed a memory leak when rejecting client connections due to
- the socket limit being reached (CID 66382). This affected
- Privoxy 3.0.21 when compiled with IPv6 support (on most
- platforms this is the default).
- - Fixed an immediate-use-after-free bug (CID 66394) and two
- additional unconfirmed use-after-free complaints made by
- Coverity scan (CID 66391, CID 66376).
- - Actually show the FORCE_PREFIX value on the show-status page.
- - Properly deal with Keep-Alive headers with timeout= parameters
- If the timeout still can't be parsed, use the configured
- timeout instead of preventing the client from keeping the
- connection alive. Fixes #3615312/#870 reported by Bernard Guillot.
- - Not using any filter files no longer results in warning messages
- unless an action file is referencing header taggers or filters.
- Reported by Stefan Kurtz in #3614835.
- - Fixed a bug that prevented Privoxy from reusing some reusable
- connections. Two bit masks with different purpose unintentionally
- shared the same bit.
- - A couple of additional bugs were discovered by Coverity Scan.
- The fixes that are not expected to affect users are not explicitly
- mentioned here, for details please have a look at the CVS logs.
+- Bug fixes for regressions in 3.0.27:
+ - Fixed misplaced parentheses.
+ Reported by David Binderman.
+ - Changed two regression tests to depend on config directive
+ enable-remote-toggle instead of FEATURE_TOGGLE.
+--------------------------------------------------------------------
+ChangeLog for Privoxy 3.0.27
+--------------------------------------------------------------------
- General improvements:
- - Introduced negative tag patterns NO-REQUEST-TAG and NO-RESPONSE-TAG.
- They apply if no matching tag is found after parsing client or
- server headers.
- - Add support for external filters which allow to process the
- response body with a script or program written in any language
- the platform supports. External filters are enabled with
- +external-filter{} after they have been defined in one of the
- filter files with a header line starting with "EXTERNAL-FILTER:".
- External filter support is experimental, not compiled by default
- and known not to work on all platforms.
- - Add support for the 'PATCH' method as defined in RFC5789.
- - Reject requests with unsupported Expect header values.
- Fixes a couple of Co-Advisor tests.
- - Normalize the HTTP-version in forwarded requests and responses.
- This is an explicit RFC 2616 MUST and RFC 7230 mandates that
- intermediaries send their own HTTP-version in forwarded
- messages.
- - Server 'Keep-Alive' headers are no longer forwarded. From a user's
- point of view it doesn't really matter, but RFC 2616 (obsolete)
- mandates that the header is removed and this fixes a Co-Advisor
- complaint.
- - Change declared template file encoding to UTF-8. The templates
- already used a subset of UTF-8 anyway and changing the declaration
- allows to properly display UTF-8 characters used in the action files.
- This change may require existing action files with ISO-8859-1
- characters that aren't valid UTF-8 to be converted to UTF-8.
- Requested by Sam Chen in #582.
- - Do not pass rejected keep-alive timeouts to the server. It might
- not have caused any problems (we know of), but doing the right
- thing shouldn't hurt either.
- - Let log_error() use its own buffer size #define to make changing
- the log buffer size slightly less inconvenient.
- - Turned single-threaded into a "proper" toggle directive with arguments.
- - CGI templates no longer enforce new windows for some links.
- - Remove an undocumented workaround ('HOST' header removal) for
- an Apple iTunes bug that according to #729900 got fixed in 2003.
+ - Add a receive-buffer-size directive which can be used to
+ set the size of the previously statically allocated buffer
+ in handle_established_connection().
+ Increasing the buffer size increases Privoxy's memory usage but
+ can lower the number of context switches and thereby reduce the
+ CPU usage and potentially increase the throughput.
+ This is mostly relevant for fast network connections and
+ large downloads that don't require filtering.
+ Sponsored by: Robert Klemme
+ - Add a listen-backlog directive which specifies the backlog
+ value passed to listen().
+ Sponsored by: Robert Klemme
+ - Add an enable-accept-filter directive which allows to
+ toggle accept filter support at run time when compiled
+ with FEATURE_ACCEPT_FILTER support.
+ It makes testing more convenient and now that it's
+ optional we can emit an error message if enabling
+ the accept filter fails.
+ Sponsored by: Robert Klemme
+ - Add a delay-response{} action.
+ This is useful to tar pit JavaScript requests that
+ are endlessly retried in case of blocks. It can also
+ be used to simulate a slow Internet connection.
+ Sponsored by: Robert Klemme
+ - Add a 'trusted-cgi-referrer' directive.
+ It allows to configure another page or site that can be used
+ to reach sensitive CGI resources.
+ Sponsored by: Robert Klemme
+ - Add a --fuzz mode which exposes Privoxy internals to input
+ from files or stdout.
+ Mainly tested with American Fuzzy Lop. For details see:
+ https://www.fabiankeil.de/talks/fuzzing-on-freebsd/
+ This work was partially funded with donations and done
+ as part of the Privoxy month in 2015.
+ - Consistently use the U(ngreedy) flag in the 'img-reorder' filter.
+ - listen_loop(): Reuse a single thread attribute object
+ The object doesn't change and creating a new one for
+ every thread is a waste of (CPU) time.
+ Sponsored by: Robert Klemme
+ - Free csp resources in the thread that belongs to the csp instead
+ of the main thread which has enough on its plate already.
+ Sponsored by: Robert Klemme
+ - Improve 'socket timeout reached' message.
+ Log the timeout that was triggered and downgrade the
+ log level to LOG_LEVEL_CONNECT to reduce the log noise
+ with common debug settings.
+ The timeout isn't necessary the result of an error and
+ usually merely indicates that Privoxy's socket timeout
+ is lower than the relevant timeouts used by client and
+ server.
+ Sponsored by: Robert Klemme
+ - Explicitly taint the server socket in case of CONNECT requests.
+ This doesn't fix any known problems, but makes
+ some log messages less confusing.
+ - Let write_pid_file() terminate if the pid file can't be opened.
+ Logging the issue at info level is unlikely to help.
+ - log_error(): Reduce the mutex-protected area by not using a
+ heap-allocated buffer that is shared between all threads.
+ This increases performance and reduces the latency with
+ verbose debug settings and multiple concurrent connections.
+ Sponsored by: Robert Klemme
+ - Let zalloc() use calloc() if it's available.
+ In some situations using calloc() can be faster than
+ malloc() + memset() and it should never be slower.
+ In the real world the impact of this change is not
+ expected to be noticeable.
+ Sponsored by: Robert Klemme
+ - Never use select() when poll() is available.
+ On most platforms select() is limited by FD_SETSIZE while
+ poll() is not. This was a scaling issue for multi-user setups.
+ Using poll() has no downside other than the usual risk
+ that code modifications may introduce new bugs that have
+ yet to be found and fixed.
+ At least in theory this commit could also reduce the latency
+ when there are lots of connections and select() would use
+ "bit fields in arrays of integers" to store file descriptors.
+ Another side effect is that Privoxy no longer has to stop
+ monitoring the client sockets when pipelined requests are
+ waiting but can't be read yet.
+ This code keeps the select()-based code behind ifdefs for
+ now but hopefully it can be removed soonish to make the
+ code more readable.
+ Sponsored by: Robert Klemme
+ - Add a 'reproducible-tarball-dist' target.
+ It's currently separate from the "tarball-dist" target
+ because it requires a tar implementation with mtree spec
+ support.
+ It's far from being perfect and does not enforce a
+ reproducible mode, but it's better than nothing.
+ - Use arc4random() if it's available.
+ While Privoxy doesn't need high quality pseudo-random numbers
+ there's no reason not to use them when we can and this silences
+ a warning emitted by code checkers that can't tell whether or not
+ the quality matters.
+ - Show the FEATURE_EXTERNAL_FILTERS status on the status page.
+ Better late than never. Previously a couple of tests weren't
+ executed as Privoxy-Regression-Test couldn't detect that the
+ FEATURE_EXTERNAL_FILTERS dependency was satisfied.
+ - Ditch FEATURE_IMAGE_DETECT_MSIE.
+ It's an obsolete workaround we inherited from Junkbuster
+ and was already disabled by default.
+ Users that feel the urge to work around issues with
+ image requests coming from an Internet Explorer version
+ from more than 15 years ago can still do this using tags.
+ - Consistently use strdup_or_die() instead of strdup() in
+ cases where allocation failures aren't expected.
+ Using strdup_or_die() allows to remove a couple of explicit
+ error checks which slightly reduces the size of the binary.
+ - Insert a refresh tag into the /client-tags CGI page when
+ serving it while a client-specific tag is temporarily enabled.
+ This makes it less likely that the user ends up
+ looking at tag state that is out of date.
+ - Use absolute URLs in the client-tag forms.
+ It's more consistent with the rest of the CGI page
+ URLs and makes it more convenient to copy the forms
+ to external pages.
+ - cgi_error_disabled(): Use status code 403 and an appropriate response line
+ - Use a dedicated CGI handler to deal with tag-toggle requests
+ As a result the /client-tags page is now safe to reach without
+ trusted Referer header which makes bookmarking or linking to
+ it more convenient.
+ Finally, refreshing the /client-tags page to show the
+ current state can no longer unintentionally repeat the
+ previous toggle request.
+ - Don't add a "Connection" header for CONNECT requests.
+ Explicitly sending "Connection: close" is not necessary and
+ apparently it causes problems with some forwarding proxies
+ that will close the connection prematurely.
+ Reported by Marc Thomas.
+ - Fix compiler warnings.
+
+- Bug fixes:
+ - rfc2553_connect_to(): Properly detect and log when poll()
+ reached the time out. Previously this was logged as:
+ Could not connect to [...]: No error: 0.
+ which isn't very helpful.
+ Sponsored by: Robert Klemme
+ - add_tag_for_client(): Set time_to_live properly.
+ Previously the time_to_live was always set for the first tag.
+ Attempts to temporarily enable a tag would result in enabling
+ it permanently unless no tag was enabled already.
+ - Revert r1.165 which didn't perform as advertised.
+ While the idea was to use "https:// when creating links
+ for the user manual on the website", the actual effect
+ was to use "https://" when Privoxy was supposed to serve
+ the user manual itself.
+ Reported by Yossi Zahn on Privoxy-devel@.
+ - socks5_connect(): Fail in case of unsupported address types.
+ Previously they would not be detected right away and
+ Privoxy would fail later on with an error message that
+ didn't make it obvious that the problem was socks-related.
+ So far, no such problems have actually been reported.
+ - socks5_connect(): Properly deal with socks replies that
+ contain IPv6 addresses.
+ Previously parts of the reply were left unread and
+ later on treated as invalid HTTP response data.
+ Fixes #904 reported by Danny Goossen who also provided
+ the initial version of this patch.
- Action file improvements:
- - The pattern 'promotions.' is no longer being blocked.
- Reported by rakista in #3608540.
- - Disable fast-redirects for .microsofttranslator.com/.
- - Disable filter{banners-by-size} for .dgb-tagungszentren.de/.
- - Add adn.speedtest.net as a site-specific unblocker.
- Support request #3612908.
- - Disable filter{banners-by-size} for creativecommons.org/.
- - Block requests to data.gosquared.com/. Reported by cbug in #3613653.
- - Unblock .conrad./newsletter/. Reported by David Bo in #3614238.
- - Unblock .bundestag.de/.
- - Unblock .rote-hilfe.de/.
- - Disable fast-redirects for .facebook.com/plugins/like.php.
- - Unblock Stackexchange popup URLs that aren't used to serve ads.
- Reported by David Wagner in #3615179.
- - Disable fast-redirects for creativecommons.org/.
- - Unblock .stopwatchingus.info/.
- - Block requests for .adcash.com/script/.
- Reported by Tyrexionibus in #3615289.
- - Disable HTML filters if the response was tagged as JavaScript.
- Filtering JavaScript code with filters intended to deal with HTML
- is usually a waste of time and, more importantly, may break stuff.
- - Use a custom redirect{} for .washingtonpost.com/wp-apps/imrs\.php\?src=
- Previously enabling the 'Advanced' settings (or manually enabling
- +fast-redirects{}) prevented some images from being loaded properly.
- - Unblock "adina*." Fixes #919 reported by Morton A. Goldberg.
- - Block '/.*DigiAd'.
- - Unblock 'adele*.'. Reported by Adele Lime in #1663.
- - Disable banners-by-size for kggp.de/.
-
-- Filter file improvements & bug fixes:
- - Decrease the chances that js-annoyances creates invalid JavaScript.
- Submitted by John McGowan on ijbswa-users@.
- - Let the msn filter hide 'related' ads again.
- - Remove a stray '1' in the 'html-annoyances' filter.
- - Prevent img-reorder from messing up img tags with empty src
- attributes. Fixes #880 reported by Duncan.
+ - Unblock 'msdn.microsoft.com/'.
+ It (presumably) isn't used to serve the kind of ads Privoxy should
+ block by default but happens to serve lots of pages with URLs that
+ are likely to result in false positives.
+ Reported by bugreporter1694 in AF#939.
+ - Disable gif deanimation for requests tagged with CSS-REQUEST.
+ The action will ignore content that isn't considered text
+ anyway and explicitly disabling it makes this more obvious
+ if "action" debugging (debug 65536) is enabled while
+ "gif deanimation" debugging (debug 256) isn't.
+ - Explicitly disable HTML filters for requests with CSS-REQUEST tag.
+ The filters are unlikely to break CSS files but executing
+ them without (intentionally) getting any hits is a waste of
+ cpu time and makes the log more noisy when running with
+ "debug 64".
+ - Unblock 'adventofcode.com/'.
+ Reported by Clint Adams in Debian bug #848211.
+ Fixes Roland's AF#937.
+ - Unblock 'adlibris.com'.
+ Reported by Wyrex in #935
+ - Unblock .golang.org/
+ - Add fast-redirects exception for '.youtube.com/.*origin=http'
+
+- Privoxy-Log-Parser:
+ - Don't gather host and resource statistics if they aren't requested.
+ While the performance impact seems negligible this significantly
+ reduces the memory usage if there are lots of requests.
+ - Bump version as the behaviour (slightly) changed.
+ - Count connection failures as well in statistics mode.
+ Sponsored by: Robert Klemme
+ - Count connection timeouts as well in statistics mode.
+ Sponsored by: Robert Klemme
+ - Fix an 'uninitialized value' warning when generating
+ statistics for a log file without response headers.
+ While privoxy-log-parser was supposed to detect this already,
+ the check was flawed and the message the user didn't see was
+ somewhat confusing anyway.
+ Now the message is less confusing, more helpful and actually printed.
+ Reported by: Robert Klemme
- Documentation improvements:
- - Updated the 'Would you like to donate?' section.
- - Note that invalid forward-override{} parameter syntax isn't
- detected until the parameter is used.
- - Add another +redirect{} example: a shortcut for illumos bugs.
- - Make it more obvious that many operating systems support log
- rotation out of the box.
- - Fixed dead links. Reported by Mark Nelson in #3614557.
- - Rephrased the 'Why is the configuration so complicated?' answer
- to be slightly less condescending. Anonymously suggested in #3615122.
- - Be more explicit about accept-intercepted-requests's lack of MITM support.
- - Make 'demoronizer' FAQ entries more generic.
- - Add an example hostname to the --pre-chroot-nslookup description.
- - Add an example for a host pattern that matches an IP address.
- - Rename the 'domain pattern' to 'host pattern' as it may
- contain IP addresses as well.
- - Recommend forward-socks5t when using Tor. It seems to work fine and
- modifying the Tor configuration to profit from it hasn't been necessary
- for a while now.
- - Add another redirect{} example to stress that redirect loops can
- and should be avoided.
- - The usual spelling and grammar fixes. Parts of them were
- reported by Reuben Thomas in #3615276.
- - Mention the PCRS option letters T and D in the filter section.
- - Clarify that handle-as-empty-doc-returns-ok is still useful
- and will not be removed without replacement.
- - Note that security issues shouldn't be reported using the bug tracker.
- - Clarify what Privoxy does if both +block{} and +redirect{} apply.
- - Removed the obsolete bookmarklets section.
+ - Refer to the git sources instead of CVS.
+ - Use GNU/Linux when referring to the OS instead of the kernel.
+ - Add FAQ entry for what to do if editing the config file is access denied.
+ - Add brief HTTP/2 FAQ.
+ - Add a small fuzzing section to the developer documentation.
+ - Add a client-header-tagger{client-ip-address} example.
+ - Stop suggesting that Privoxy is an anonymizing proxy.
+ The term could lead to Privoxy users overestimating
+ what it can do on its own (without Tor).
+ - Make it more obvious that SPI accepts Paypal, too.
+ Currently most donations are made through the Paypal account
+ managed by Zwiebelfreunde e.V. and a more even distribution
+ would be useful.
+ - Suggest to log applying actions as well when reproducing problems.
+ - Explicitly mention that Privoxy binaries are built by individuals
+ on their own systems. Buyer beware!
+ - Mention the release feed on the homepage.
+ - Remove a mysterious comment with a GNU FDL link as it isn't
+ useful and could confuse license scanners.
+ In May 2002 it was briefly claimed that "this document" was covered
+ by the GNU FDL. The commit message (r1.5) doesn't explain the motivation
+ or whether all copyright holders were actually asked and agreed to the
+ declared license change.
+ It's thus hard to tell whether or not the license change was legit,
+ but luckily two days later the "doc license" was "put" "back to GPL"
+ anyway (r1.6).
+ At the same time the offending comment with a link to the FDL
+ (not the GPL) was added for no obvious reason.
+ Now it's gone again.
+
+- Regression tests:
+ - Bump for-privoxy-version to 3.0.27 as we now rely on untrusted
+ CGI request being rejected with status code 403 (instead of 200).
+ - Update test for /send-stylesheet and add another one
+
+- Templates:
+ - Consistently use https:// when linking to the Privoxy website.
+ - Remove SourceForge references in Copyright header.
+ - Remove a couple of SourceForge references in a comment.
+ While at it, fix the grammar.
+ - Move the site-specific documentation block before the generic one.
+ While most Privoxy installations don't have a site-specific
+ documentation block, in cases were it exists it's likely to
+ be more relevant than the generic one.
+ Showing it first makes it less likely that users stop reading
+ before they reach it, especially on pages that don't fit on
+ the screen.
- Build system improvements:
- - Let --with-group properly deal with secondary groups.
- Patch submitted by Anatoly Arzhnikov in #3615187.
- - Fix web-actions target.
- - Add a web-faq target that only updates the FAQ on the webserver.
- - Remove already-commented-out non-portable DOSFILTER alternatives.
- - Remove the obsolete targets dok-put and dok-get.
- - Add a sf-shell target.
-
-- Known bugs:
- - To compile with --disable-force you need the following change which
- didn't make it into the release:
- http://ijbswa.cvs.sourceforge.net/viewvc/ijbswa/current/project.h?r1=1.208&r2=1.209&view=patch
- Thanks to Kai Raven for the report.
+ - Prefer openjade to jade. On some systems Jade produces
+ HTML with unescaped ampersands in URLs.
+ - Prefer OpenSP to SP to be consistent.
+ - Have Docbook generated HTML files be straight ASCII.
+ Dealing with a mixture of ISO-8859 and UTF-8 files is problematic.
+ - Echo the filename to stderr for 'make dok-tidy'.
+ Make it a bit easier to find errors in docbook generated HTML.
+ - Warn when still using select().
+ - Warn when compiling without calloc().
+ - Make it more obvious that the --with-fdsetsize configure switch
+ is pointless if poll() is available.
+ - Remove support for AmigaOS.
+ - Update windows build system to use supported software.
+ The cygwin gcc -mno-cygwin option is no longer supported, so
+ convert the windows build system to use the cygwin cross-compiler
+ to build "native" code.
+ - Add --enable-static-linking option for configure
+ does the same thing as LDFLAGS=-static; ./configure
+ but nicer than mixing evars and configure options.
-----------------------------------------------------------------
About Privoxy:
Our TODO list is rather long. Helping hands and donations are welcome:
- * http://www.privoxy.org/faq/general.html#PARTICIPATE
+ * https://www.privoxy.org/faq/general.html#PARTICIPATE
- * http://www.privoxy.org/faq/general.html#DONATE
+ * https://www.privoxy.org/faq/general.html#DONATE
At present, Privoxy is known to run on Windows 95 and later versions
(98, ME, 2000, XP, Vista, Windows 7 etc.), GNU/Linux (RedHat, SuSE,
Debian, Fedora, Gentoo, Slackware and others), Mac OS X (10.4 and
-upwards on PPC and Intel processors), OS/2, Haiku, DragonFly,
+upwards on PPC and Intel processors), OS/2, Haiku, DragonFly, ElectroBSD,
FreeBSD, NetBSD, OpenBSD, Solaris, and various other flavors of Unix.
In addition to the core features of ad blocking and cookie management,
tracing of rule and filter effects. Remote toggling.
* Web page filtering (text replacements, removes banners based on size,
- invisible <quote>web-bugs</quote> and HTML annoyances, etc.)
+ invisible "web-bugs" and HTML annoyances, etc.)
* Modularized configuration that allows for standard settings and user
settings to reside in separate files, so that installing updated actions
* Most features are controllable on a per-site or per-location basis.
-Download location:
- http://sourceforge.net/project/showfiles.php?group_id=11118
-
Home Page:
- http://www.privoxy.org/
+ https://www.privoxy.org/
- - Privoxy Developers <ijbswa-developers@lists.sourceforge.net>
+ - Privoxy Developers <privoxy-devel@lists.privoxy.org>
projects / privoxy.git / blobdiff