- Announcing Privoxy v.3.0.19 stable
+ Announcing Privoxy 3.0.30 stable
--------------------------------------------------------------------
-This is a bug-fix release for the previously released
-Privoxy 3.0.18. One of the fixes addresses a security issue.
+Privoxy 3.0.30 stable fixes a couple of bugs and introduces
+a few new features.
--------------------------------------------------------------------
-ChangeLog for Privoxy
+ChangeLog for Privoxy 3.0.30
--------------------------------------------------------------------
-*** Version 3.0.19 Stable ***
- Bug fixes:
- - Prevent a segmentation fault when de-chunking buffered content.
- It could be triggered by malicious web servers if Privoxy was
- configured to filter the content and running on a platform
- where SIZE_T_MAX isn't larger than UINT_MAX, which probably
- includes most 32-bit systems. On those platforms, all Privoxy
- versions before 3.0.19 appear to be affected.
- To be on the safe side, this bug should be presumed to allow
- code execution as proving that it doesn't seems unrealistic.
- - Do not expect a response from the SOCKS4/4A server until it
- got something to respond to. This regression was introduced
- in 3.0.18 and prevented the SOCKS4/4A negotiation from working.
- Reported by qqqqqw in #3459781.
+ - Check the actual URL for redirects when https inspecting requests.
+ Previously Privoxy would only check the path which resulted in
+ rewrite results being rejected as invalid URLs.
+ Reported by withoutname in #1736.
+ - Let the hide-referrer code tolerate Referer headers with https:// URLs.
+ Previously they would always be treated like a changed host.
+ - Use the https headers if the show-request handler is reached through
+ https://. Previously Privoxy would use the http headers which
+ may be empty on a reused connection.
+ - Make CGI_PREFIX protocol-relative when building with FEATURE_HTTPS_INSPECTION.
+ This unbreaks (at least) https://config.privoxy.org/client-tags whose
+ buttons would previously use a http:// URL resulting in browser warnings.
+ - Support using https-inspection and client-header-order at the same time.
+ Previously Privoxy would crash.
+ Reported by: Kai Raven
+ - Properly reject rewrites from http to https as they currently
+ aren't supported. Previously Privoxy would wait for the client
+ to establish an encrypted connection which obviously would not happen.
+ - When https inspection is enabled and Privoxy has been compiled with
+ FEATURE_GRACEFUL_TERMINATION (not recommended for production builds),
+ the TLS backend resources are free'd later on and only if no active
+ connections are left. Prevents crashes when exiting "gracefully" at the
+ wrong time.
+ - Let the uninstall target remove the config file even if DESTDIR
+ is set and properly announce the deletion of the configuration files.
- General improvements:
- - Fix an off-by-one in an error message about connect failures.
- - Use a GNUMakefile variable for the webserver root directory and
- update the path. Sourceforge changed it which broke various
- web-related targets.
- - Update the CODE_STATUS description.
-
-*** Version 3.0.18 stable ***
-
-- Bug fixes:
- - If a generated redirect URL contains characters RFC 3986 doesn't
- permit, they are (re)encoded. Not doing this makes Privoxy versions
- from 3.0.5 to 3.0.17 susceptible to HTTP response splitting (CWE-113)
- attacks if the +fast-redirects{check-decoded-url} action is used.
- - Fix a logic bug that could cause Privoxy to reuse a server
- socket after it got tainted by a server-header-tagger-induced
- block that was triggered before the whole server response had
- been read. If keep-alive was enabled and the request following
- the blocked one was to the same host and using the same forwarding
- settings, Privoxy would send it on the tainted server socket.
- While the server would simply treat it as a pipelined request,
- Privoxy would later on fail to properly parse the server's
- response as it would try to parse the unread data from the
- first response as server headers for the second one.
- Regression introduced in 3.0.17.
- - When implying keep-alive in client_connection(), remember that
- the client didn't. Fixes a regression introduced in 3.0.13 that
- would cause Privoxy to wait for additional client requests after
- receiving a HTTP/1.1 request with "Connection: close" set
- and connection sharing enabled.
- With clients which terminates the client connection after detecting
- that the whole body has been received it doesn't really matter,
- but with clients that don't the connection would be kept open until
- it timed out.
- - Fix a subtle race condition between prepare_csp_for_next_request()
- and sweep(). A thread preparing itself for the next client request
- could briefly appear to be inactive.
- If all other threads were already using more recent files,
- the thread could get its files swept away under its feet.
- So far this has only been reproduced while stress testing in
- valgrind while touching action files in a loop. It's unlikely
- to have caused any actual problems in the real world.
- - Disable filters if SDCH compression is used unless filtering is forced.
- If SDCH was combined with a supported compression algorithm, Privoxy
- previously could try to decompress it and ditch the Content-Encoding
- header even though the SDCH compression wasn't dealt with.
- Reported by zebul666 in #3225863.
- - Make a copy of the --user value and only mess with that when splitting
- user and group. On some operating systems modifying the value directly
- is reflected in the output of ps and friends and can be misleading.
- Reported by zepard in #3292710.
- - If forwarded-connect-retries is set, only retry if Privoxy is actually
- forwarding the request. Previously direct connections would be retried
- as well.
- - Fixed a small memory leak when retrying connections with IPv6
- support enabled.
- - Remove an incorrect assertion in compile_dynamic_pcrs_job_list()
- It could be triggered by a pcrs job with an invalid pcre
- pattern (for example one that contains a lone quantifier).
- - If the --user argument user[.group] contains a dot, always bail out
- if no group has been specified. Previously the intended, but undocumented
- (and apparently untested), behaviour was to try interpreting the whole
- argument as user name, but the detection was flawed and checked for '0'
- instead of '\0', thus merely preventing group names beginning with a zero.
- - In html_code_map[], use a numeric character reference instead of '
- which wasn't standardized before XHTML 1.0.
- - Fix an invalid free when compiled with FEATURE_GRACEFUL_TERMINATION
- and shut down through http://config.privoxy.org/die
- - In get_actions(), fix the "temporary" backwards compatibility hack
- to accept block actions without reason.
- It also covered other actions that should be rejected as invalid.
- Reported by Billy Crook.
-
-- General improvements:
- - Privoxy can (re)compress buffered content before delivering
- it to the client. Disabled by default as most users wouldn't
- benefit from it.
- - The +fast-redirects{check-decoded-url} action checks URL
- segments separately. If there are other parameters behind
- the redirect URL, this makes it unnecessary to cut them off
- by additionally using a +redirect{} pcrs command.
- Initial patch submitted by Jamie Zawinski in #3429848.
- - When loading action sections, verify that the referenced filters
- exist. Currently missing filters only result in an error message,
- but eventually the severity will be upgraded to fatal.
- - Allow to bind to multiple separate addresses.
- Patch set submitted by Petr Pisar in #3354485.
- - Set socket_error to errno if connecting fails in rfc2553_connect_to().
- Previously rejected direct connections could be incorrectly reported
- as DNS issues if Privoxy was compiled with IPv6 support.
- - Adjust url_code_map[] so spaces are replaced with %20 instead of '+'
- While '+' can be used by client's submitting form data, this is not
- actually what Privoxy is using the lookups for. This is more of a
- cosmetic issue and doesn't fix any known problems.
- - When compiled without FEATURE_FAST_REDIRECTS, do not silently
- ignore +fast-redirect{} directives
- - Added a workaround for GNU libc's strptime() reporting negative
- year values when the parsed year is only specified with two digits.
- On affected systems cookies with such a date would not be turned
- into session cookies by the +session-cookies-only action.
- Reported by Vaeinoe in #3403560
- - Fixed bind failures with certain GNU libc versions if no non-loopback
- IP address has been configured on the system. This is mainly an issue
- if the system is using DHCP and Privoxy is started before the network
- is completely configured.
- Reported by Raphael Marichez in #3349356.
- Additional insight from Petr Pisar.
- - Privoxy log messages now use the ISO 8601 date format %Y-%m-%d.
- It's only slightly longer than the old format, but contains
- the full date including the year and allows sorting by date
- (when grepping in multiple log files) without hassle.
- - In get_last_url(), do not bother trying to decode URLs that do
- not contain at least one '%' sign. It reduces the log noise and
- a number of unnecessary memory allocations.
- - In case of SOCKS5 failures, dump the socks response in the log message.
- - Simplify the signal setup in main().
- - Streamline socks5_connect() slightly.
- - In socks5_connect(), require a complete socks response from the server.
- Previously Privoxy didn't care how much data the server response
- contained as long as the first two bytes contained the expected
- values. While at it, shrink the buffer size so Privoxy can't read
- more than a whole socks response.
- - In chat(), do not bother to generate a client request in case of
- direct CONNECT requests. It will not be used anyway.
- - Reduce server_last_modified()'s stack size.
- - Shorten get_http_time() by using strftime().
- - Constify the known_http_methods pointers in unknown_method().
- - Constify the time_formats pointers in parse_header_time().
- - Constify the formerly_valid_actions pointers in action_used_to_be_valid().
- - Introduce a GNUMakefile MAN_PAGE variable that defaults to privoxy.1.
- The Debian package uses section 8 for the man page and this
- should simplify the patch.
- - Deduplicate the INADDR_NONE definition for Solaris by moving it to jbsockets.h
- - In block_url(), ditch the obsolete workaround for ancient Netscape versions
- that supposedly couldn't properly deal with status code 403.
- - Remove a useless NULL pointer check in load_trustfile().
- - Remove two useless NULL pointer checks in load_one_re_filterfile().
- - Change url_code_map[] from an array of pointers to an array of arrays
- It removes an unnecessary layer of indirection and on 64bit system reduces
- the size of the binary a bit.
- - Fix various typos. Fixes taken from Debian's 29_typos.dpatch by Roland Rosenfeld.
- - Add a dok-tidy GNUMakefile target to clean up the messy HTML
- generated by the other dok targets.
- - GNUisms in the GNUMakefile have been removed.
- - Change the HTTP version in static responses to 1.1
- - Synced config.sub and config.guess with upstream
- 2011-11-11/386c7218162c145f5f9e1ff7f558a3fbb66c37c5.
- - Add a dedicated function to parse the values of toggles. Reduces duplicated
- code in load_config() and provides better error handling. Invalid or missing
- toggle values are now a fatal error instead of being silently ignored.
- - Terminate HTML lines in static error messages with \n instead of \r\n.
- - Simplify cgi_error_unknown() a bit.
- - In LogPutString(), don't bother looking at pszText when not
- actually logging anything.
- - Change ssplit()'s fourth parameter from int to size_t.
- Fixes a clang complaint.
- - Add a warning that the statistics currently can't be trusted.
- Mention Privoxy-Log-Parser's --statistics option as
- an alternative for the time being.
- - In rfc2553_connect_to(), start setting cgi->error_message on error.
- - Change the expected status code returned for http://p.p/die depending
- on whether or not FEATURE_GRACEFUL_TERMINATION is available.
- - In cgi_die(), mark the client connection for closing.
- If the client will fetch the style sheet through another connection
- it gets the main thread out of the accept() state and should thus
- trigger the actual shutdown.
- - Add a proper CGI message for cgi_die().
- - Don't enforce a logical line length limit in read_config_line().
- - Slightly refactor server_last_modified() to remove useless gmtime*() calls.
- - In get_content_type(), also recognize '.jpeg' as JPEG extension.
- - Add '.png' to the list of recognized file extensions in get_content_type().
- - In block_url(), consistently use the block reason "Request blocked by Privoxy"
- In two places the reason was "Request for blocked URL" which hides the
- fact that the request got blocked by Privoxy and isn't necessarily
- correct as the block may be due to tags.
- - In listen_loop(), reload the configuration files after accepting
- a new connection instead of before.
- Previously the first connection that arrived after a configuration
- change would still be handled with the old configuration.
- - In chat()'s receive-data loop, skip a client socket check if
- the socket will be written to right away anyway. This can
- increase the transfer speed for unfiltered content on fast
- network connections.
- - The socket timeout is used for SOCKS negotiations as well which
- previously couldn't timeout.
- - Don't keep the client connection alive if any configuration file
- changed since the time the connection came in. This is closer to
- Privoxy's behaviour before keep-alive support for client connection
- has been added and also less confusing in general.
- - Treat all Content-Type header values containing the pattern
- 'script' as a sign of text. Reported by pribog in #3134970.
+ - Allow to rewrite the request destination for https-inspected
+ requests behind the client's back. The documentation already sort
+ of claimed that it was supported by not especially mentioning that
+ it didn't work for https-inspected requests.
+ Fixes SF bug #923 reported by withoutname.
+ - Add support for filtering client request bodies by using
+ CLIENT-BODY-FILTER filters which can be enabled with the
+ client-body-filter action.
+ Patch submitted by Maxim Antonov.
+ Sponsored by: Robert Klemme
+ - Add the new action suppress-tag{} which can be used to prevent
+ a tagger from adding a tag. Patch submitted by Maxim Antonov.
+ Sponsored by: Robert Klemme
+ - Gracefully handle existing website keys without matching certificates.
+ This can happen if Privoxy was previously running with an invalid
+ TLS configuration that didn't allow it to create a certificate.
+ - Recycle debug bit 4 for Tagging-related messages.
+ - Improve the message shown when the client-tags CGI page
+ is requested with no tags configured.
+ - Shorten the 'donate' and 'participate' links used by templates
+ using redirects. Currently the redirects lead to the FAQ entries
+ but in the future we may want to relocate the content and using
+ redirects makes this more convenient.
+ - Log an error when a PCRE-HOST-PATTERN is used with
+ FEATURE_PCRE_HOST_PATTERNS disabled. Don't treat this a
+ fatal error so the regression tests can be used with and
+ without FEATURE_PCRE_HOST_PATTERNS.
+ - The code compiles with older C compilers again.
+ - The chdir() return code is checked to fix a compiler warning.
+ - The packages feed has been removed from the source tarball.
+ It's usually out of date when the source tarball is generated
+ for the release.
+ - Fixed harmless compiler warnings from GCC9 with -D_FORTIFY_SOURCE=2.
+ - windows: Remove obsolete '$(DEST)/doc/images' target.
+ - windows: Install the images referenced in the user manual.
+ - Remove obsolete 'gnu_regex.@OBJEXT@' target.
+ - When installing from the GNUMAkefile, don't create an 'images'
+ directory which is no longer used. The images were relocated to
+ the user-manual directory years ago.
+ - Add new FEATURES to the show-status page and resort list.
+ - Remove unused variable in the OpenSSL-specific code.
+ - Update bug tracker URL in cgi_error_unknown().
+ - Saved a couple of memory allocations when sorting client headers.
+ - Improved a couple of error messages.
+ - Saved memory allocations when using OpenSSL and checking if a
+ key already exists.
+ - The configure script will bail out if OpenSSL and mbedTLS are
+ enabled at the same time.
+ - Log a message right before exiting gracefully.
+ - A couple of structures have been rearranged to require slightly
+ less memory.
+ - When https inspection is enabled and the certificate is invalid
+ the error message is now sent with status code 403 instead of 200.
+ - The Slackware rc script template has been renamed to
+ slackware/rc.privoxy.in to silence complaints when building
+ Debian packages.
+ - When building with MbedTLS support, mbedtls_md5_ret() is used
+ instead of mbedtls_md5() which is deprecated and causes a warning
+ on Debian GNU/Linux.
- Action file improvements:
- - Moved the site-specific block pattern section below the one for the
- generic patterns so for requests that are matched in both, the block
- reason for the domain is shown which is usually more useful than showing
- the one for the generic pattern.
- - Remove -prevent-compression from the fragile alias. It's no longer
- used anywhere by default and isn't known to break stuff anyway.
- - Add a (disabled) section to block various Facebook tracking URLs.
- Reported by Dan Stahlke in #3421764.
- - Add a (disabled) section to rewrite and redirect click-tracking
- URLs used on news.google.com.
- Reported by Dan Stahlke in #3421755.
- - Unblock linuxcounter.net/.
- Reported by Dan Stahlke in #3422612.
- - Block 'www91.intel.com/' which is used by Omniture.
- Reported by Adam Piggott in #3167370.
- - Disable the handle-as-empty-doc-returns-ok option and mark it as deprecated.
- Reminded by tceverling in #2790091.
- - Add ".ivwbox.de/" to the "Cross-site user tracking" section.
- Reported by Nettozahler in #3172525.
- - Unblock and fast-redirect ".awin1.com/.*=http://".
- Reported by Adam Piggott in #3170921.
- - Block "b.collective-media.net/".
- - Widen the Debian popcon exception to "qa.debian.org/popcon".
- Seen in Debian's 05_default_action.dpatch by Roland Rosenfeld.
- - Block ".gemius.pl/" which only seems to be used for user tracking.
- Reported by johnd16 in #3002731. Additional input from Lee and movax.
- - Disable banners-by-size filters for '.thinkgeek.com/'.
- The filter only seems to catch pictures of the inventory.
- - Block requests for 'go.idmnet.bbelements.com/please/showit/'.
- Reported by kacperdominik in #3372959.
- - Unblock adainitiative.org/.
- - Add a fast-redirects exception for '.googleusercontent.com/.*=cache'.
- - Add a fast-redirects exception for webcache.googleusercontent.com/.
- - Unblock http://adassier.wordpress.com/ and http://adassier.files.wordpress.com/.
+ - Block requests to eu-tlp03.kameleoon.com/.
+ - Unblock metrics.sr.ht/.
+ - Disable fast-redirects for .fsf.org/.
+ - Disable fast-redirects for .gravater.com/.
+ - Disable fast-redirects for .ksta.de/.
+ - Block requests to tag.crsspxl.com/.
+ - Block requests to analytics.slashdotmedia.com/.
+ - Block requests to ml314.com/.
+ - Block requests to .adroll.com/.
+ - Block requests to fastlane.rubiconproject.com/.
+ - Block requests to api.theadex.com/.
+ - Block requests to ih.adscale.de/.
+ - Block requests to .s400.meetrics.net/.
+ - Block requests for pp.lp4.io/.
+ - Block requests for trc-events.taboola.com/.
- Filter file improvements:
- - Let the yahoo filter hide '.ads'.
- - Let the msn filter hide overlay ads for Facebook 'likes' in search
- results and elements with the id 's_notf_div'. They only seem to be
- used to advertise site 'enhancements'.
- - Let the js-events filter additionally disarm setInterval().
- Suggested by dg1727 in #3423775.
-
-- Documentation improvements:
- - Clarify the effect of compiling Privoxy with zlib support.
- Suggested by dg1727 in #3423782.
- - Point out that the SourceForge messaging system works like a black
- hole and should thus not be used to contact individual developers.
- - Mention some of the problems one can experience when not explicitly
- configuring an IP addresses as listen address.
- - Explicitly mention that hostnames can be used instead of IP addresses
- for the listen-address, that only the first address returned will be
- used and what happens if the address is invalid.
- Requested by Calestyo in #3302213.
-
-- Log message improvements:
- - If only the server connection is kept alive, do not pretend to
- wait for a new client request.
- - Remove a superfluous log message in forget_connection().
- - In chat(), properly report missing server responses as such
- instead of calling them empty.
- - In forwarded_connect(), fix a log message nobody should ever see.
- - Fix a log message in socks5_connect(), a failed write operation
- was logged as failed read operation.
- - Let load_one_actions_file() properly complain about a missing
- '{' at the beginning of the file.
- Simply stating that a line is invalid isn't particularly helpful.
- - Do not claim to listen on a socket until Privoxy actually does.
- Patch submitted by Petr Pisar #3354485
- - Prevent a duplicated LOG_LEVEL_CLF message when sending out
- the "no-server-data" response.
- - Also log the client socket when dropping a connection.
- - Include the destination host in the 'Request ... marked for
- blocking. limit-connect{...} doesn't allow CONNECT ...' message
- Patch submitted by Saperski in #3296250.
- - Prevent a duplicated log message if none of the resolved IP
- addresses were reachable.
- - In connect_to(), do not pretend to retry if forwarded-connect-retries
- is zero or unset.
- - When a specified user or group can't be found, put the name in
- single-quotes when logging it.
- - In rfc2553_connect_to(), explain getnameinfo() errors better.
- - Remove a useless log message in chat().
- - When retrying to connect, also log the maximum number of connection
- attempts.
- - Rephrase a log message in compile_dynamic_pcrs_job_list().
- Divide the error code and its meaning with a colon. Call the pcrs
- job dynamic and not the filter. Filters may contain dynamic and
- non-dynamic pcrs jobs at the same time. Only mention the name of
- the filter or tagger, but don't claim it's a filter when it could
- be a tagger.
- - In a fatal error message in load_one_actions_file(), cover both
- URL and TAG patterns.
- - In pcrs_strerror(), properly report unknown positive error code
- values as such. Previously they were handled like 0 (no error).
- - In compile_dynamic_pcrs_job_list(), also log the actual error code as
- pcrs_strerror() doesn't handle all errors reported by pcre.
- - Don't bother trying to continue chatting if the client didn't ask for it.
- Reduces log noise a bit.
- - Make two fatal error message in load_one_actions_file() more descriptive.
- - In cgi_send_user_manual(), log when rejecting a file name due to '/' or '..'.
- - In load_file(), log a message if opening a file failed.
- The CGI error message alone isn't too helpful.
- - In connection_destination_matches(), improve two log messages
- to help understand why the destinations don't match.
- - Rephrase a log message in serve(). Client request arrival
- should be differentiated from closed client connections now.
- - In serve(), log if a client connection isn't reused due to a
- configuration file change.
- - Let mark_server_socket_tainted() always mark the server socket tainted,
- just don't talk about it in cases where it has no effect. It doesn't change
- Privoxy's behaviour, but makes understanding the log file easier.
-
-- configure:
- - Added a --disable-ipv6-support switch for platforms where support
- is detected but doesn't actually work.
- - Do not check for the existence of strerror() and memmove() twice
- - Remove a useless test for setpgrp(2). Privoxy doesn't need it and
- it can cause problems when cross-compiling.
- - Rename the --disable-acl-files switch to --disable-acl-support.
- Since about 2001, ACL directives are specified in the standard
- config file.
- - Update the URL of the 'Removing outdated PCRE version after the
- next stable release' posting. The old URL stopped working after
- one of SF's recent site "optimizations". Reported by Han Liu.
-
-- Privoxy-Regression-Test:
- - Added --shuffle-tests option to increase the chances of detection race conditions.
- - Added a --local-test-file option that allows to use Privoxy-Regression-Test without Privoxy.
- - Added tests for missing socks4 and socks4a forwarders.
- - The --privoxy-address option now works with IPv6 addresses containing brackets, too.
- - Perform limited sanity checks for parameters that are supposed to have numerical values.
- - Added a --sleep-time option to specify a number of seconds to
- sleep between tests, defaults to 0.
- - Disable the range-requests tagger for tests that break if it's enabled.
- - Log messages use the ISO 8601 date format %Y-%m-%d.
- - Fix spelling in two error messages.
- - In the --help output, include a list of supported tests and their default levels.
- - Adjust the tests to properly deal with FEATURE_TOGGLE being disabled.
+ - A allow-autocompletion filter has been added which changes
+ autocomplete="off" to "on" on input fields to allow autocompletion.
+ Requested by Jamie Zawinski in #370.
+ Filter based on a submission by Aaron Linville.
+ - Added an imdb filter.
+ - Added a sourceforge filter that reduces the amount of ads
+ for proprietary software.
+ - Added a github filter that removes the annoying "Sign-Up"
+ banner and the Cookie disclaimer.
+ - Removed a duplicated pcrs command from the js-annoyances filter.
+ - The crude-parental filter now provides a short reason when blocking,
+ inserts a link to Privoxy's webinterface and adds a new line at
+ the end of the generated page.
- Privoxy-Log-Parser:
- - Perform limited sanity checks for command line parameters that
- are supposed to have numerical values.
- - Implement a --unbreak-lines-only option to try to revert MUA breakage.
- - Accept and highlight: Added header: Content-Encoding: deflate
- - Accept and highlight: Compressed content from 29258 to 8630 bytes.
- - Accept and highlight: Client request arrived in time on socket 21.
- - Highlight: Didn't receive data in time: a.fsdn.com:443
- - Accept log messages with ISO 8601 time stamps, too.
+ - Highlight a few more messages.
+ - Add a handler for tagging messages.
+ - Properly deal with 'Certificate error' crunches
+ Previously the error description was highlighted as 'host'.
+ - Log truncated LOG_LEVEL_CLF messages more gracefully
+ and note that the statistics will be imprecise.
+ - Fixed perldoc typo.
+ - Bump version to 0.9.2.
+
+- Privoxy-Regression-Test:
+ - Use http://127.0.0.1:8118/ as default Privoxy address
+ unless http_proxy is set through the environment.
+ - Add a --privoxy-cgi-prefix option that specifies the prefix
+ to use when building URLs that are supposed to reach Privoxy's
+ CGI interface. If it's not set, http://p.p/ is used, which is
+ supposed to work with the default Privoxy configuration.
+ If Privoxy has been built with FEATURE_HTTPS_INSPECTION enabled,
+ and if https inspection is activated with the +https-inspection
+ action, this option can be used with "https://p.p/" provided the
+ system running Privoxy-Regression-Test has been configured to
+ trust the certificate used by Privoxy.
+ Note that there are currently two tests in the official
+ regression-tests.action file that are expected to fail
+ when using "https://p.p/" as privoxy-cgi-prefix.
+ - Skip the connection-established response in get_status_code()
+ when looking for the status code with a CGI prefix
+ that starts with https://. We care about the status code
+ sent by the impersonated web server.
+ - Use --proxy-header when using a CGI prefix with https://
+ and a "Host:" header.
+ - Allow '|' in tokens and values to allow tag patterns like
+ "TAG:^(application|text)/(x-)?javascript$".
+ - When get_cgi_page_or_else() fails, include the URL of the
+ requested page in the log message.
+ - Added a --check-bad-ssl option that can be used to verify that
+ Privoxy detects certificate problems when accessing the test
+ sites from badssl.com.
+ - Bumped version to 0.7.2
- uagen:
- - Bump generated Firefox version to 8.0.
- - Only randomize the release date if the new --randomize-release-date
- option is enabled. Firefox versions after 4 use a fixed date string
- without meaning.
+ - Update example output.
+ - Recommend the use of the https-inspection action in the documentation.
+ - Upgrade a couple of URLs to https://.
+ - Add ElectroBSD to the list of operating systems.
+ - Bumped generated Firefox version to 78 (ESR).
+ - Bumped version to 1.2.2.
+
+ - User documentation:
+ - Remove reference to 'How to Report Bugs Effectively'.
+ It was only rendered as text without URL in the README anyway
+ and there's no indication that users read it ...
+ - Let the dok-readme target fix the location embedded into the
+ README file. This used to be done by CVS but since the git migration
+ it has to be done through other means.
+ - Remove 'experimental' warning for client-specific-tag-related directives.
+ They seem to work reliably and there is no obvious reason
+ why we would change the syntax in the near future.
+ - Describe how to check if Privoxy has been built with
+ FEATURE_HTTPS_INSPECTION.
+ - Add a link to the trusted-cas-file documentation
+ that explains how the user can create the file herself.
+ - Don't explicitly mention the license for the code coming from
+ 'Anonymous Coders' and Junkbusters. It's obviously licensed under
+ the GNU GPL like the rest of Privoxy or we wouldn't be allowed to
+ distribute it.
+ - Update the +hide-user-agent example with uagen output.
+ - Slightly improve the wording of the ca-key-file documentation.
+ - Explicitly mention Windows 10 as supported so search engines and
+ users looking for it can find it.
+ - Import a bunch of contributors from the ChangeLog.
+ - Remove obsolete doc/gpl.html.
+ - Upgrade a couple of links to https://.
+ - Don't prefer the SourceForge patch tracker over the
+ privoxy-devel mailing list. While at it, link to the
+ SourceForge patch tracker.
+ - Mention http-inspection in the 'my browser warns me about
+ unauthenticated content' FAQ entry.
+ - Simplify the 'Is there is a license or fee?' FAQ entry.
+ - Add another +redirect{} example.
+ - Explicitly mention that interested sponsors should include
+ the link target in their first mail.
+ - Clarify that only Privoxy team members can object to new sponsors
+ and link to the list of current team members.
+ - Note that sponsor URLs may not contain keyword spam.
+ - Garbage collect doc/webserver/images which isn't referenced anymore.
+ - Update the method to reach the proxy settings in Firefox.
+ - Update proxy_setup.jpg description to refer to Firefox.
+ - Regenerate proxy_setup.jpg with a more recent Firefox (78.0).
+ - Regenerate files-in-use.jpg without obsolete standard.action
+ with modern colors and a slightly better quality.
+ - Update URL to the actionsfile tracker.
+ - Update a support request URL.
+ - Rephrase the 'Can Privoxy run as service' FAQ entry and
+ remove an obsolete paragraph.
+ - Let the 'Where can I get updated Actions Files?' entry link to
+ the gitweb version of default.action.master.
+ - Update a link to the default.action file.
+ - Update URLs for trackers and mailing lists.
+ - Replace CVS reference with git.
+ - Mention regression-tests.action in the config file.
+ - Explicitly mention in the config file that access to the
+ CA key should be limited to Privoxy.
+ - List more client-specific-tag examples for inspiration.
+ - Add additional headers to the client-header-order example.
+ - Note that actions aren't updated after rewrites.
+ - Explicitly mention that upgrading from http to https with
+ a client-header filter is not supported
+ - Note that protocol and host have to be added when rewriting
+ the destination host for https-inspected requests.
+ - Explicitly mention that the CA key is used to sign certificates.
+ - Put openssl command in 'command' tags.
+ - The man page has been moved from section 1 to man section 8.
+
+- Developer manual:
+ - Flesh out the build instructions for Debian.
+ - Remove the packaging instructions for RPM-based systems.
+ They don't work and we don't release RPM packages anymore anyway.
+ - Remove the packaging instructions for Solaris.
+ They don't work and we don't release Solaris packages anymore anyway.
+ - Update the suggested subject for the announce mails.
+ - Update upload instructions.
+ ftp://upload.sourceforge.net is no longer functional.
+ - Remove a couple of package-dependent upload instructions
+ that don't actually work.
+ - Remove 'cd current' that no longer works.
+ - Add regression-tests.action to the list of files that should be installed.
+ - Stop claiming that there are text versions of the manuals.
+ We stopped building them in 2008 (9ed36a3c5e6f12).
+ - Note that the 'webserver' target creates the link needed for the user-manual.
+ - Suggest to use the master branch as reference when creating
+ the ChangeLog so the steps work when the current branch differs
+ from master which is likely as the developer manual
+ suggests to use a local branch for development.
+ - Add the -s flag to the suggested 'git tag' command. We prefer signed tags.
+ - Mention that merges into 'master' should be avoided.
+ - Add git commands that should result in a merge-free history.
+ - Mention Privoxy-Regression-Test.
+ - Add a section id to reduce link churn.
+ - Recommend the dok-tidy target when building docs for the webserver.
+ - Add another plug for the privoxy-devel mailing list.
+ - Let the intro link the copyright section in the user manual instead
+ of giving an incomplete summary of the license status.
+ - Clarify that the webserver target uploads to the SourceForge webserver.
+ - Mark the documentation for the Mac OS X installers as out of date and
+ change the SCM name back to CVS.
+ - Fix the location of the installer modules for Mac OS X.
+ They are not actually available through git (yet).
+ - Don't speak of Privoxy version 3 in the past tense.
+ - Update the list of programs required for the release process.
+ - Update description of the webserver target which uses ssh, not scp.
+ - Remove obsolete reference to config.new.
+
+- Tests:
+ - Add another hide-referrer{conditional-block} test.
+ - Add another hide-referrer{conditional-forge} test.
+ - Fix a hide-referrer{conditional-forge} test
+ that expected an acceptable header to be forged.
+ - Fix a hide-referrer{conditional-block} test
+ that expected an acceptable Referer to be removed.
+ - Explain why the "Set Header = Host: whatever.example.org" test is
+ expected to fail when using a CGI prefix that starts with "https://".
+ - Explain why a connection-sharing test is known to fail
+ when using "https://p.p/" as CGI prefix.
+ - Add a link to Privoxy-Regression-Test to regression-tests.action
+ in case it isn't packaged.
+ - Add regression tests for pcre host patterns.
+ - Fixed a regression test that is executed when
+ FEATURE_GRACEFUL_TERMINATION is enabled.
+
+- Privoxy infrastructure:
+ - Import a Privoxy logo for the website.
+ - Update Tor onion service to HiddenServiceVersion 3.
+ - Display the "model" photos in a single row and remove placeholder images.
+ - Regenerate homepage with updated sponsor list.
+ - Use the '/sponsor' redirect for the link to the sponsor page.
+ - Git commit messages are sent to the Privoxy-commits mailing list.
-----------------------------------------------------------------
About Privoxy:
Privoxy is Free Software and licensed under the GNU GPLv2.
-Privoxy is an associated project of Software in the Public Interest (SPI).
-
-Helping hands and donations are welcome:
+Our TODO list is rather long. Helping hands and donations are welcome:
- * http://www.privoxy.org/faq/general.html#PARTICIPATE
+ * https://www.privoxy.org/participate
- * http://www.privoxy.org/faq/general.html#DONATE
+ * https://www.privoxy.org/donate
-At present, Privoxy is known to run on Windows(95, 98, ME, 2000,
-XP, Vista), GNU/Linux (Ubuntu, RedHat, SuSE, Debian, Fedora, Gentoo and
-others), Mac OSX, OS/2, AmigaOS, FreeBSD, NetBSD, OpenBSD, Solaris, and
-various other flavors of Unix.
+At present, Privoxy is known to run on Windows 95 and later versions
+(98, ME, 2000, XP, Vista, Windows 7, Windows 10 etc.), GNU/Linux
+(RedHat, SuSE, Debian, Fedora, Gentoo, Slackware and others),
+Mac OS X (10.4 and upwards on PPC and Intel processors), Haiku,
+DragonFly, ElectroBSD, FreeBSD, NetBSD, OpenBSD, Solaris,
+and various other flavors of Unix.
In addition to the core features of ad blocking and cookie management,
Privoxy provides many supplemental features, that give the end-user
more control, more privacy and more freedom:
+ * Supports "Connection: keep-alive". Outgoing connections can be kept
+ alive independently from the client. Currently not available on all
+ platforms.
- * Supports "Connection: keep-alive". Outgoing connections can be kept
- alive independently from the client. Currently not available on all
- platforms.
+ * Supports IPv6, provided the operating system does so too,
+ and the configure script detects it.
- * Supports IPv6, provided the operating system does so too,
- and the configure script detects it.
+ * Supports tagging which allows to change the behaviour based on client
+ and server headers.
- * Supports tagging which allows to change the behaviour based on client
- and server headers.
+ * Supports https inspection which allows to filter https requests.
- * Can be run as an "intercepting" proxy, which obviates the need to
- configure browsers individually.
+ * Can be run as an "intercepting" proxy, which obviates the need to
+ configure browsers individually.
- * Sophisticated actions and filters for manipulating both server and
- client headers.
+ * Sophisticated actions and filters for manipulating both server and
+ client headers.
- * Can be chained with other proxies.
+ * Can be chained with other proxies.
- * Integrated browser based configuration and control utility at
- http://config.privoxy.org/ (shortcut: http://p.p/). Browser-based
- tracing of rule and filter effects. Remote toggling.
+ * Integrated browser based configuration and control utility at
+ http://config.privoxy.org/ (shortcut: http://p.p/). Browser-based
+ tracing of rule and filter effects. Remote toggling.
- * Web page filtering (text replacements, removes banners based on size,
- invisible <quote>web-bugs</quote> and HTML annoyances, etc.)
+ * Web page filtering (text replacements, removes banners based on size,
+ invisible "web-bugs" and HTML annoyances, etc.)
- * Modularized configuration that allows for standard settings and user
- settings to reside in separate files, so that installing updated actions
- files won't overwrite individual user settings.
+ * Modularized configuration that allows for standard settings and user
+ settings to reside in separate files, so that installing updated actions
+ files won't overwrite individual user settings.
- * Support for Perl Compatible Regular Expressions in the configuration
- files, and a more sophisticated and flexible configuration syntax.
+ * Support for Perl Compatible Regular Expressions in the configuration
+ files, and a more sophisticated and flexible configuration syntax.
- * GIF de-animation.
+ * GIF de-animation.
- * Bypass many click-tracking scripts (avoids script redirection).
+ * Bypass many click-tracking scripts (avoids script redirection).
- * User-customizable HTML templates for most proxy-generated pages (e.g.
- "blocked" page).
+ * User-customizable HTML templates for most proxy-generated pages (e.g.
+ "blocked" page).
- * Auto-detection and re-reading of config file changes.
-
- * Most features are controllable on a per-site or per-location basis.
+ * Auto-detection and re-reading of config file changes.
+ * Most features are controllable on a per-site or per-location basis.
-Download location:
- http://sourceforge.net/project/showfiles.php?group_id=11118
-
-Home Page:
- http://www.privoxy.org/
+Home Page:
+ https://www.privoxy.org/
- - Privoxy Developers <ijbswa-developers@lists.sourceforge.net>
+ - Privoxy Developers <privoxy-devel@lists.privoxy.org>
projects / privoxy.git / blobdiff