<!entity license SYSTEM "license.sgml">
<!entity p-authors SYSTEM "p-authors.sgml">
<!entity config SYSTEM "p-config.sgml">
-<!entity p-version "3.0.4">
-<!entity p-status "beta">
+<!entity p-version "3.0.7">
+<!entity p-status "stable">
<!entity % p-authors-formal "INCLUDE"> <!-- include additional text, etc -->
-<!entity % p-not-stable "INCLUDE">
-<!entity % p-stable "IGNORE">
+<!entity % p-not-stable "IGNORE">
+<!entity % p-stable "INCLUDE">
<!entity % p-text "IGNORE"> <!-- define we are not a text only doc -->
<!entity % p-doc "INCLUDE"> <!-- and we are a formal doc -->
<!entity % p-readme "IGNORE">
This file belongs into
ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/
- $Id: user-manual.sgml,v 2.20 2006/09/10 14:53:54 hal9 Exp $
+ $Id: user-manual.sgml,v 2.31 2007/06/02 14:01:37 fabiankeil Exp $
- Copyright (C) 2001- 2006 Privoxy Developers <developers@privoxy.org>
+ Copyright (C) 2001-2007 Privoxy Developers http://www.privoxy.org/
See LICENSE.
========================================================================
<subscript>
<!-- Completely the wrong markup, but very little is allowed -->
<!-- in this part of an article. FIXME -->
- <link linkend="copyright">Copyright</link> &my-copy; 2001 - 2006 by
+ <link linkend="copyright">Copyright</link> &my-copy; 2001 - 2007 by
<ulink url="http://www.privoxy.org/">Privoxy Developers</ulink>
</subscript>
</pubdate>
-<pubdate>$Id: user-manual.sgml,v 2.20 2006/09/10 14:53:54 hal9 Exp $</pubdate>
+<pubdate>$Id: user-manual.sgml,v 2.31 2007/06/02 14:01:37 fabiankeil Exp $</pubdate>
<!--
]]>
<para>
- The <citetitle>User Manual</citetitle> gives users information on how to
+ The <citetitle>Privoxy User Manual</citetitle> gives users information on how to
install, configure and use <ulink
url="http://www.privoxy.org/">Privoxy</ulink>.
</para>
<!-- end privoxy.sgml -->
<para>
- You can find the latest version of the <citetitle>User Manual</citetitle> at <ulink
+ You can find the latest version of the <citetitle>
Privoxy User Manual</citetitle> at <ulink
url="http://www.privoxy.org/user-manual/">http://www.privoxy.org/user-manual/</ulink>.
Please see the <link linkend="contact">Contact section</link> on how to
contact the developers.
<sect2 id="features"><title>Features</title>
<para>
In addition to the core
- features of ad blocking and cookie management,
+ features of ad blocking and
+ <ulink url="http://en.wikipedia.org/wiki/Browser_cookie">cookie</ulink> management,
<application>Privoxy</application> provides many supplemental
features<![%p-not-stable;[, some of them currently under development]]>,
that give the end-user more control, more privacy and more freedom:
How to install the binary packages depends on your operating system:
</para>
+<!-- XXX: The installation sections should be sorted -->
+
<!-- ~~~~~ New section ~~~~~ -->
-<sect3 id="installation-pack-rpm"><title>Red Hat, SuSE and Conectiva RPMs</title>
+<sect3 id="installation-pack-rpm"><title>Red Hat and Fedora RPMs</title>
<para>
RPMs can be installed with <literal>rpm -Uvh privoxy-&p-version;-1.rpm</literal>,
in the same directory as you installed <application>Privoxy</application> in.
</para>
<para>
- Version 3.0.4 introduce
s full <application>Windows</application> service
+ Version 3.0.4 introduce
d full <application>Windows</application> service
functionality. On Windows only, the <application>Privoxy</application>
program has two new command line arguments to install and uninstall
<application>Privoxy</application> as a <emphasis>service</emphasis>.
</sect3>
<!-- ~~~~~ New section ~~~~~ -->
-<sect3 id="installation-pack-bintgz"><title>Solaris, NetBSD, FreeBSD, HP-UX</title>
+<sect3 id="installation-pack-bintgz"><title>Solaris, NetBSD, HP-UX</title>
<para>
Create a new directory, <literal>cd</literal> to it, then unzip and
</para>
</sect3>
+<!-- ~~~~~ New section ~~~~~ -->
+<sect3 id="installation-tbz"><title>FreeBSD</title>
+
+<para>
+ Privoxy is part of FreeBSD's Ports Collection, you can build and install
+ it with <literal>cd /usr/ports/www/privoxy; make install clean</literal>.
+</para>
+<para>
+ If you don't use the ports, you can fetch and install
+ the package with <literal>pkg_add -r privoxy</literal>.
+</para>
+<para>
+ The port skeleton and the package can also be downloaded from the
+ <ulink url="https://sourceforge.net/project/showfiles.php?group_id=11118">File Release
+ Page</ulink>, but if you're interested in stable releases only you don't
+ gain anything by using them.
+</para>
+</sect3>
+
<!-- ~~~~~ New section ~~~~~ -->
<sect3 id="installattion-gentoo"><title>Gentoo</title>
<para>
<para>
The most convenient way to obtain the <application>Privoxy</application> sources
- is to download the source tarball from our <ulink url="http://sf.net/projects/ijbswa/">project
+ is to download the source tarball from our
+ <ulink url="http://sourceforge.net/project/showfiles.php?group_id=11118&package_id=10571">project download
page</ulink>.
</para>
<sect1 id="whatsnew">
<title>What's New in this Release</title>
<para>
- There are many improvements and new features in <application>Privoxy</application> &p-version;
- :
+ There are many improvements and new features since <application>Privoxy 3.0.6</application>, the last stable release:
</para>
<para>
<itemizedlist>
<listitem>
<para>
- Multiple <link linkend="filter-file">filter files</link> can now be specified in <filename>config</filename>. This allows for
- locally defined filters that can be maintained separately from the filters as
- supplied by the developers.
+ Header filtering can be done with dedicated header filters now. As a result
+ the actions <quote>filter-client-headers</quote> and <quote>filter-server-headers</quote>
+ that were introduced with <application>Privoxy 3.0.5</application> to apply
+ the content filters to the headers as, well have been removed again.
</para>
</listitem>
-
+
+<!-- pre-3.0.6 changes:
<listitem>
<para>
There are a number of new <link linkend="actions-file">actions</link>:
option, for placing documentation and help files on the local system.
</para>
</listitem>
+
+ <listitem>
+ <para>
+ There are six new <link linkend="FILTER">filters</link>.
+ </para>
+ </listitem>
<listitem>
<para>
- Actions files problems and suggestions are now being directed to: <ulink url="http://sourceforge.net/tracker/?group_id=11118&atid=460288">http://sourceforge.net/tracker/?group_id=11118&atid=460288</ulink>.
+ Actions files problems and suggestions are now being directed to:
+ <ulink url="http://sourceforge.net/tracker/?group_id=11118&atid=460288">http://sourceforge.net/tracker/?group_id=11118&atid=460288</ulink>.
Please use this to report such configuration related problems as missed
ads, sites that don't function properly due to one action or another,
innocent images being blocked, etc.
<listitem>
<para>
- In addition, there are various bug fixes and significant enhancements, including
- error pages should no longer be cached if the problem is fixed, much better DNS
- error handling, and various logging improvements.
+ In addition, there are numerous bug fixes and significant enhancements,
+ including error pages should no longer be cached if the problem is fixed,
+ much better DNS error handling, various logging improvements, and
+ configuration updates for better ad blocking and junk elimination.
</para>
</listitem>
-
+-->
</itemizedlist>
</para>
</listitem>
<listitem>
<para>
- On the other hand, some installers may not overwrite any existing configuration
+ On the other hand, other installers may not overwrite any existing configuration
files, thinking you will want to do that. You may want to manually check
your saved files against the newer versions to see if the improvements have
merit, or whether there are new options that you may want to consider.
<para>
See the full documentation on
<literal><link linkend="fast-redirects">fast-redirects</link></literal>
- which has changed syntax, and may require adjustments to local configs.
+ which has changed syntax, and will require adjustments to local configs,
+ such as <filename>user.action</filename>. You must reference the new
+ syntax:
</para>
+ <para>
+ <screen>
+ { +fast-redirects{check-decoded-url} }
+ .example.com
+ mybank.com
+ .google.</screen>
+</para>
+
</listitem>
<listitem>
<para>
- The <filename>jarfile</filename>, cookie logger, is off by default now.
+ The <filename>jarfile</filename>,
+ <ulink url="http://en.wikipedia.org/wiki/Browser_cookie">cookie</ulink> logger, is off by default now.
</para>
</listitem>
and you may want to review which actions are <quote>on</quote> by
default. This is primarily a matter of emphasis, but some features
you may have been used to, may now be <quote>off</quote> by default.
+ There are also a number of new actions and filters you may want to
+ consider, most of which are not fully incorporated into the default
+ settings as yet (see above).
</para>
</listitem>
-
+
+ <listitem>
+ <para>
+ The default actions setting is now <literal>Cautious</literal>. Previous
+ releases had a default setting of <literal>Medium</literal>. Experienced
+ users may want to adjust this, as it is fairly conservative by &my-app;
+ standards and past practices. See <ulink
+ url="http://config.privoxy.org/edit-actions-list?f=default">
+ http://config.privoxy.org/edit-actions-list?f=default</ulink>. New users
+ should try the default settings for a while before turning up the volume.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ The default setting has filtering turned <emphasis>off</emphasis>, which
+ subsequently means that compression is <emphasis>on</emphasis>. Remember
+ that filtering does not work on compressed pages, so if you use, or want to
+ use, filtering, you will need to force compression off. Example:
+ </para>
+ <para>
+ <screen>
+ { +<link linkend="filter">filter</link>{google} +<link linkend="prevent-compression">prevent-compression</link> }
+ .google.</screen>
+ </para>
+ <para>
+ Or if you use a number of filters, or filter many sites, you may just want
+ to turn off compression for all sites in
+ <filename>default.action</filename> (or
+ <filename>user.action</filename>).
+ </para>
+
+ </listitem>
+
+ <listitem>
+ <para>
+ Also, <link linkend="SESSION-COOKIES-ONLY">session-cookies-only</link> is
+ off by default now. If you've liked this feature in the past, you may want
+ to turn it back on in <filename>user.action</filename> now.
+ </para>
+ </listitem>
+
+
<listitem>
<para>
<!-- I think it is best to keep this somewhat vague, in case -->
</para>
</listitem>
+
</itemizedlist>
</para>
</sect2>
<listitem>
<para>
Set your browser to use <application>Privoxy</application> as HTTP and
- HTTPS (SSL) proxy by setting the proxy configuration for address of
+ HTTPS (SSL) <ulink url="http://en.wikipedia.org/wiki/Proxy_server">proxy</ulink>
+ by setting the proxy configuration for address of
<literal>127.0.0.1</literal> and port <literal>8118</literal>.
<emphasis>DO NOT</emphasis> activate proxying for <literal>FTP</literal> or
any protocols besides HTTP and HTTPS (SSL)! It won't work!
<listitem>
<para>
Flush your browser's disk and memory caches, to remove any cached ad images.
- If using <application>Privoxy</application> to manage cookies, you should
- remove any currently stored cookies too.
+ If using <application>Privoxy</application> to manage
+ <ulink url="http://en.wikipedia.org/wiki/Browser_cookie">cookies</ulink>,
+ you should remove any currently stored cookies too.
</para>
</listitem>
<para>
See the <link linkend="configuration">Configuration section</link> for more
configuration options, and how to customize your installation.
- <![%draft;[ You might also want to look at the <link
+ You might also want to look at the <link
linkend="quickstart-ad-blocking">next section</link> for a quick
introduction to how <application>Privoxy</application> blocks ads and
- banners.]]>
+ banners.
</para>
</listitem>
<listitem>
<para>
- If you experience ads that slipped through, innocent images that are
+ If you experience ads that slip through, innocent images that are
blocked, or otherwise feel the need to fine-tune
- <application>Privoxy's</application> behaviour, take a look at the <link
+ <application>Privoxy's</application> behavior, take a look at the <link
linkend="actions-file">actions files</link>. As a quick start, you might
find the <link linkend="act-examples">richly commented examples</link>
helpful. You can also view and edit the actions files through the <ulink
url="http://config.privoxy.org">web-based user interface</ulink>. The
- Appendix <quote><link linkend="actionsanat">Anatomy of an
- Action</link></quote> has hints how to debug actions that
+ Appendix <quote><link linkend="actionsanat">Troubleshooting: Anatomy of an
+ Action</link></quote> has hints on how to understand and debug actions that
<quote>misbehave</quote>.
</para>
</listitem>
<para>
First a bit of a warning ... blocking ads is much like blocking SPAM: the
more aggressive you are about it, the more likely you are to block
- things that were not intended. So there is a trade off here. If you want
+ things that were not intended. And the more likely that some things
+ may not work as intended. So there is a trade off here. If you want
extreme ad free browsing, be prepared to deal with more
<quote>problem</quote> sites, and to spend more time adjusting the
configuration to solve these unintended consequences. In short, there is
Secondly, a brief explanation of <application>Privoxy's </application>
<quote>actions</quote>. <quote>Actions</quote> in this context, are
the directives we use to tell <application>Privoxy</application> to perform
- some task relating to HTTP transactions (i.e. web browsing). We tell
+ some task relating to WWW transactions (i.e. web browsing). We tell
<application>Privoxy</application> to take some <quote>action</quote>. Each
action has a unique name and function. While there are many potential
<application>actions</application> in <application>Privoxy's</application>
original page's HTML content. An ad image for instance, is just an URL
embedded in the page somewhere. The image itself may be on the same server,
or a server somewhere else on the Internet. Complex web pages will have many
- such embedded URLs.
+ such embedded URLs. &my-app; can deal with each URL individually, so, for
+ instance, the main page text is not touched, but images from such-and-such
+ server are blocked.
</para>
<para>
- The actions we need to know about for ad blocking are: <literal><link
+ The most important actions for basic ad blocking are: <literal><link
linkend="block">block</link></literal>, <literal><link
- linkend="handle-as-image">handle-as-image</link></literal>, and
+ linkend="handle-as-image">handle-as-image</link></literal>,
+ <literal><link
+ linkend="handle-as-empty-document">handle-as-empty-document</link></literal>,and
<literal><link linkend="set-image-blocker">set-image-blocker</link></literal>:
</para>
<listitem>
<para>
- <literal><link linkend="block">block</link></literal> - this action stops
- any contact between your browser and any URL patterns that match this
- action's configuration. It can be used for blocking ads, but also anything
- that is determined to be unwanted. By itself, it simply stops any
- communication with the remote server and sends <application>Privoxy</application>'s
- own built-in BLOCKED page instead to let you now what has happened.
+ <literal><link linkend="block">block</link></literal> - this is perhaps
+ the single most used action, and is particularly important for ad blocking.
+ This action stops any contact between your browser and any URL patterns
+ that match this action's configuration. It can be used for blocking ads,
+ but also anything that is determined to be unwanted. By itself, it simply
+ stops any communication with the remote server and sends
+ <application>Privoxy</application>'s own built-in BLOCKED page instead to
+ let you now what has happened (with some exceptions, see below).
</para>
</listitem>
</para>
</listitem>
+ <listitem>
+ <para>
+ <literal><link linkend="handle-as-empty-document">handle-as-empty-document</link></literal> -
+ sends an empty document instead of <application>Privoxy's</application>
+ normal BLOCKED HTML page. This is useful for file types that are neither
+ HTML nor images, such as blocking JavaScript files.
+ </para>
+ </listitem>
+
<listitem>
<para>
<literal><link
to now go to the <link linkend="act-examples">Actions Files Tutorial</link>.
The ideas explained therein also apply to the web-based editor.
</para>
+<para>
+ There are also various
+ <link linkend="filter">filters</link> that can be used for ad blocking
+ (filters are a special subset of actions). These
+ fall into the <quote>advanced</quote> usage category, and are explained in
+ depth in later sections.
+</para>
</sect2>
<para>
Before launching <application>Privoxy</application> for the first time, you
will want to configure your browser(s) to use
- <application>Privoxy</application> as a HTTP and HTTPS (SSL) proxy. The default is
+ <application>Privoxy</application> as a HTTP and HTTPS (SSL)
+ <ulink url="http://en.wikipedia.org/wiki/Proxy_server">proxy</ulink>. The default is
127.0.0.1 (or localhost) for the proxy address, and port 8118 (earlier versions
used port 8000). This is the one configuration step <emphasis>that must be done
</emphasis>!
<para>
- With <application>Firefox</application>, this can be set under:
+ With <application>Firefox</application>, this is typically set under:
</para>
<literallayout>
</literallayout>
+<para>
+ Or optionally on some platforms:
+</para>
+
+<literallayout>
+ <guibutton>Edit</guibutton> -> <guibutton>Preferences</guibutton> -> <guibutton>General</guibutton> -> <guibutton>Connection Settings</guibutton> -> <guibutton>Manual Proxy Configuration</guibutton>
+
+</literallayout>
+
<para>
With <application>Netscape</application> (and
<para>
Then, check <quote>Use Proxy</quote> and fill in the appropriate info
(Address: 127.0.0.1, Port: 8118). Include HTTPS (SSL), if you want HTTPS
- proxy support too (sometimes labeled <quote>Secure</quote>. Make sure any
+ proxy support too (sometimes labeled <quote>Secure</quote>). Make sure any
checkboxes like <quote>Use the same proxy server for all protocols</quote> is
<emphasis>UNCHECKED</emphasis>. You want only HTTP and HTTPS (SSL)!
</para>
<para>
After doing this, flush your browser's disk and memory caches to force a
re-reading of all pages and to get rid of any ads that may be cached. Remove
- any cookies, if you want <application>Privoxy</application> to manage that. You
- are now ready to start enjoying the benefits of using
+ any <ulink url="http://en.wikipedia.org/wiki/Browser_cookie">cookies</ulink>,
+ if you want <application>Privoxy</application> to manage that. You are now
+ ready to start enjoying the benefits of using
<application>Privoxy</application>!
</para>
</para>
<sect2 id="start-redhat">
-<title>Red Hat, Fedora and Conectiva</title>
+<title>Red Hat and Fedora</title>
<para>
A default Red Hat installation may not start &my-app; upon boot. It will use
the file <filename>/etc/privoxy/config</filename> as its main configuration
</para>
</sect2>
+<!--
+ omitting 10/31/06 HB
+
<sect2 id="start-suse">
<title>SuSE</title>
<para>
</screen>
</para>
</sect2>
-
+-->
<sect2 id="start-windows">
<title>Windows</title>
<para>
</para>
<para>
- On <application>MS Windows</application> only there are two addition
- options to allow <application>Privoxy</application> to install and
+ On <application>MS Windows</application> only there are two additional
+
command-line options to allow <application>Privoxy</application> to install and
run as a <emphasis>service</emphasis>. See the
<link linkend="installation-pack-win">Window Installation section</link>
for details.
<filename>default.action</filename> (which you will most probably want
to define sooner or later) are probably best applied in
<filename>user.action</filename>, where you can preserve them across
- upgrades. <filename>standard.action</filename> is for
+ upgrades. <filename>standard.action</filename> is only for
<application>Privoxy's</application> internal use.
</para>
<para>
<para>
The syntax of all configuration files has remained the same throughout the
3.x series. There have been enhancements, but no changes that would preclude
- the use of any configuration file from one version to the next.
+ the use of any configuration file from one version to the next. (There is
+ one exception: <link linkend="FAST-REDIRECTS">+fast-redirects</link> which
+ has enhanced syntax and will require updating any local configs from earlier
+ versions.)
</para>
<para>
in a line. If the <literal>#</literal> is preceded by a backslash, it looses
its special function. Placing a <literal>#</literal> in front of an otherwise
valid configuration line to prevent it from being interpreted is called "commenting
- out" that line.
+ out" that line. Blank lines are ignored.
</para>
<para>
There are a number of such actions, with a wide range of functionality.
Each action does something a little different.
These actions give us a veritable arsenal of tools with which to exert
- our control, preferences and independence.
+ our control, preferences and independence. Actions can be combined so that
+ their effects are aggregated when applied against a given set of URLs.
</para>
<para>
There
that sets the initial values for all actions. It is intended to
provide a base level of functionality for
<application>Privoxy's</application> array of features. So it is
- a set of broad rules that should work reasonably well for users everywhere.
+ a set of broad rules that should work reasonably well as-is for most users.
This is the file that the developers are keeping updated, and <link
linkend="installation-keepupdated">making available to users</link>.
- It is also the file that keeps track of the user's preferences
- as set in <filename>standard.action</filename>, e.g. either
- <literal>cautious</literal>, <literal>medium</literal>, or
- <literal>adventuresome</literal>.
+ The user's preferences as set in <filename>standard.action</filename>,
+ e.g. either <literal>Cautious</literal> (the default),
+ <literal>Medium</literal>, or <literal>Advanced</literal> (see
+ below).
</para>
</listitem>
<listitem>
</listitem>
<listitem>
<para>
- <filename>standard.action</filename> - is used by the web based editor
+ <filename>standard.action</filename> - is used only by the web based editor
at <ulink url="http://config.privoxy.org/edit-actions-list?f=default">
http://config.privoxy.org/edit-actions-list?f=default</ulink>,
to set various pre-defined sets of rules for the default actions section
in <filename>default.action</filename>.
</para>
<para>
- <guibutton>Edit</guibutton> <guibutton>Set to Cautious</guibutton> <guibutton>Set to Medium</guibutton> <guibutton>Set to Adventuresome</guibutton>
+ <guibutton>Edit</guibutton> <guibutton>Set to Cautious</guibutton> <guibutton>Set to Medium</guibutton> <guibutton>Set to Advanced</guibutton>
</para>
<para>
These have increasing levels of aggressiveness <emphasis>and have no
influence on your browsing unless you select them explicitly in the
- editor</emphasis>.
+ editor</emphasis>. A default installation should be pre-set to
+ <literal>Cautious</literal> (versions prior to 3.0.5 were set to
+ <literal>Medium</literal>). New users should try this for a while before
+ adjusting the settings to more aggressive levels. The more aggressive
+ the settings, then the more likelihood there is of problems such as sites
+ not working as they should.
</para>
<para>
The <guibutton>Edit</guibutton> button allows you to turn each
action on/off individually for fine-tuning. The <guibutton>Cautious</guibutton>
button changes the actions list to low/safe settings which will activate
- a minimal set of &my-app;'s features, and subsequently there will be
- less of a chance for accidental problems. The <guibutton>Medium</guibutton>
- button sets the list to a medium level of ad blocking and a low level set of
- privacy features. The <guibutton>Adventuresome</guibutton> button
- sets the list to a high level of ad blocking and medium level of
- privacy. See the chart below. The latter three buttons over-ride
- any changes via with the <guibutton>Edit</guibutton> button. More
- fine-tuning can be done in the lower sections of this internal page.
+ ad blocking and a minimal set of &my-app;'s features, and subsequently
+ there will be less of a chance for accidental problems. The
+ <guibutton>Medium</guibutton> button sets the list to a medium level of
+ other features and a low level set of privacy features. The
+ <guibutton>Advanced</guibutton> button sets the list to a high level of
+ ad blocking and medium level of privacy. See the chart below. The latter
+ three buttons over-ride any changes via with the
+ <guibutton>Edit</guibutton> button. More fine-tuning can be done in the
+ lower sections of this internal page.
</para>
<para>
It is not recommend to edit the <filename>standard.action</filename> file
<entry>Feature</entry>
<entry>Cautious</entry>
<entry>Medium</entry>
- <entry>Adventuresome</entry>
+ <entry>Advanced</entry>
</row>
</thead>
<!-- <tfoot> -->
<row>
<entry>Ad-blocking Aggressiveness</entry>
- <entry>low</entry>
<entry>medium</entry>
<entry>high</entry>
+ <entry>high</entry>
</row>
<row>
</row>
<row>
<entry>Pop-up killing</entry>
- <entry>no</entry>
- <entry>unsolicited</entry>
- <entry>all</entry>
+ <entry>blocks only</entry>
+ <entry>blocks only</entry>
+ <entry>blocks only</entry>
</row>
<row>
<entry>Privacy Features</entry>
- <entry>none</entry>
<entry>low</entry>
<entry>medium</entry>
+ <entry>medium/high</entry>
</row>
<row>
<row>
<entry>HTML taming</entry>
<entry>no</entry>
- <entry>yes</entry>
+ <entry>no</entry>
<entry>yes</entry>
</row>
<row>
<entry>JavaScript taming</entry>
<entry>no</entry>
- <entry>yes</entry>
+ <entry>no</entry>
<entry>yes</entry>
</row>
<para>
The list of actions files to be used are defined in the main configuration
file, and are processed in the order they are defined (e.g.
- <filename>default.action</filename> is typically process before
+ <filename>default.action</filename> is typically processed before
<filename>user.action</filename>). The content of these can all be viewed and
edited from <ulink
url="http://config.privoxy.org/show-status">http://config.privoxy.org/show-status</ulink>.
-</para>
+ The over-riding principle when applying actions, is that the last action that
+ matches a given URL, wins. The broadest, most general rules go first
+ (defined in <filename>default.action</filename>),
+ followed by any exceptions (typically also in
+ <filename>default.action</filename>), which are then followed lastly by any
+ local preferences (typically in <emphasis>user</emphasis><filename>.action</filename>).
+ Generally, <filename>user.action</filename> has the last word.
+ </para>
<para>
An actions file typically has multiple sections. If you want to use
Note that some <link linkend="actions">actions</link>, like cookie suppression
or script disabling, may render some sites unusable that rely on these
techniques to work properly. Finding the right mix of actions is not always easy and
- certainly a matter of personal taste. In general, it can be said that the more
+ certainly a matter of personal taste. And, things can always change, requiring
+ refinements in the configuration. In general, it can be said that the more
<quote>aggressive</quote> your default settings (in the top section of the
actions file) are, the more exceptions for <quote>trusted</quote> sites you
will have to make later. If, for example, you want to crunch all cookies per
url="http://config.privoxy.org/show-status">http://config.privoxy.org/show-status</ulink>.
The editor allows both fine-grained control over every single feature on a
per-URL basis, and easy choosing from wholesale sets of defaults like
- <quote>Cautious</quote>, <quote>Medium</quote> or <quote>Adventuresome</quote>.
- Warning: the <quote>Adventuresome</quote> setting is not only more aggressive,
- but includes settings that are fun and subversive, and which some may find of
- dubious merit!
+ <quote>Cautious</quote>, <quote>Medium</quote> or <quote>Advanced</quote>.
+ Warning: the <quote>Advanced</quote> setting is more aggressive, and
+ will be more likely to cause problems for some sites. Experienced users only!
</para>
<para>
If you prefer plain text editing to GUIs, you can of course also directly edit the
- the actions files. Look at <filename>default.action</filename> which is richly
- commented.
+ the actions files with your favorite text editor. Look at
+ <filename>default.action</filename> which is richly commented with many
+ good examples.
</para>
</sect2>
<sect2 id="actions-apply">
-<title>How Actions are Applied to URLs</title>
+<title>How Actions are Applied to Requests</title>
<para>
Actions files are divided into sections. There are special sections,
like the <quote><link linkend="aliases">alias</link></quote> sections which will
be discussed later. For now let's concentrate on regular sections: They have a
heading line (often split up to multiple lines for readability) which consist
of a list of actions, separated by whitespace and enclosed in curly braces.
- Below that, there is a list of URL patterns, each on a separate line.
+ Below that, there is a list of URL and tag patterns, each on a separate line.
</para>
<para>
To determine which actions apply to a request, the URL of the request is
- compared to all patterns in each <quote>action file</quote> file. Every time it matches, the list of
- applicable actions for the URL is incrementally updated, using the heading
- of the section in which the pattern is located. If multiple matches for
- the same URL set the same action differently, the last match wins. If not,
- the effects are aggregated. E.g. a URL might match a regular section with
- a heading line of <literal>{
+ compared to all URL patterns in each <quote>action file</quote>.
+ Every time it matches, the list of applicable actions for the request is
+ incrementally updated, using the heading of the section in which the
+ pattern is located. The same is done again for tags and tag patterns later on.
+</para>
+
+<para>
+ If multiple applying sections set the same action differently,
+ the last match wins. If not, the effects are aggregated.
+ E.g. a URL might match a regular section with a heading line of <literal>{
+<link linkend="handle-as-image">handle-as-image</link> }</literal>,
then later another one with just <literal>{
+<link linkend="block">block</link> }</literal>, resulting
- in <emphasis>both</emphasis> actions to apply.
+ in <emphasis>both</emphasis> actions to apply. And there may well be
+ cases where you will want to combine actions together. Such a section then
+ might look like:
</para>
+ <para>
+ <screen>
+ { +<literal>handle-as-image</literal> +<literal>block</literal> }
+ # Block these as if they were images. Send no block page.
+ banners.example.com
+ media.example.com/.*banners
+ .example.com/images/ads/</screen>
+ </para>
+
<para>
- You can trace this process for any given URL by visiting <ulink
+ You can trace this process for
URL patterns and any given URL by visiting <ulink
url="http://config.privoxy.org/show-url-info">http://config.privoxy.org/show-url-info</ulink>.
</para>
<para>
- More detail on this is provided in the Appendix, <link linkend="ACTIONSANAT">
- Anatomy of an Action</link>.
+ Examples and more detail on this is provided in the Appendix, <link linkend="ACTIONSANAT">
+ Troubleshooting: Anatomy of an Action</link> section.
</para>
</sect2>
<title>Patterns</title>
<para>
As mentioned, <application>Privoxy</application> uses <quote>patterns</quote>
- to determine what actions might apply to which sites and pages your browser
- attempts to access. These <quote>patterns</quote> use wild card type
- <emphasis>pattern</emphasis> matching to achieve a high degree of
+ to determine what <emphasis>actions</emphasis> might apply to which sites and
+ pages your browser attempts to access. These <quote>patterns</quote> use wild
+ card type <emphasis>pattern</emphasis> matching to achieve a high degree of
flexibility. This allows one expression to be expanded and potentially match
against many similar patterns.
</para>
<para>
- Generally, a <application>Privoxy</application> pattern has the form
+ Generally, a URL pattern has the form
<literal><domain>/<path></literal>, where both the
<literal><domain></literal> and <literal><path></literal> are
optional. (This is why the special <literal>/</literal> pattern matches all
<literal>http://</literal>) should <emphasis>not</emphasis> be included in
the pattern. This is assumed already!
</para>
+<para>
+ The pattern matching syntax is different for the domain and path parts of
+ the URL. The domain part uses a simple globbing type matching technique,
+ while the path part uses a more flexible
+ <ulink url="http://en.wikipedia.org/wiki/Regular_expressions"><quote>Regular
+ Expressions (PCRE)</quote></ulink> based syntax.
+</para>
<variablelist>
<varlistentry>
<listitem>
<para>
is a domain-only pattern and will match any request to <literal>www.example.com</literal>,
- regardless of which document on that server is requested.
+ regardless of which document on that server is requested. So ALL pages in
+ this domain would be covered by the scope of this action. Note that a
+ simple <literal>example.com</literal> is different and would NOT match.
</para>
</listitem>
</varlistentry>
<listitem>
<para>
matches the document <literal>/index.html</literal>, regardless of the domain,
- i.e. on <emphasis>any</emphasis> web server.
+ i.e. on <emphasis>any</emphasis> web server anywhere.
</para>
</listitem>
</varlistentry>
<listitem>
<para>
matches nothing, since it would be interpreted as a domain name and
- there is no top-level domain called <literal>.html</literal>.
+ there is no top-level domain called <literal>.html</literal>. So its
+ a mistake.
</para>
</listitem>
</varlistentry>
<term><literal>.example.</literal></term>
<listitem>
<para>
- matches any domain that <emphasis>CONTAINS</emphasis> <literal>.example.</literal>
- (Correctly speaking: It matches any FQDN that contains <literal>example</literal> as a domain.)
+ matches any domain that <emphasis>CONTAINS</emphasis> <literal>.example.</literal>.
+ And, by the way, also included would be any files or documents that exist
+ within that domain since no path limitations are specified. (Correctly
+ speaking: It matches any FQDN that contains <literal>example</literal> as
+ a domain.) This might be <literal>www.example.com</literal>,
+ <literal>news.example.de</literal>, or
+ <literal>www.example.net/cgi/testing.pl</literal> for instance. All these
+ cases are matched.
</para>
</listitem>
</varlistentry>
<para>
Additionally, there are wild-cards that you can use in the domain names
- themselves. They work pretty similar to shell wild-cards: <quote>*</quote>
- stands for zero or more arbitrary characters, <quote>?</quote> stands for
- any single character, you can define character classes in square
- brackets and all of that can be freely mixed:
+ themselves. These work similarly to shell globbing type wild-cards:
+ <quote>*</quote> represents zero or more arbitrary characters (this is
+ equivalent to the
+ <ulink url="http://en.wikipedia.org/wiki/Regular_expressions"><quote>Regular
+ Expression</quote></ulink> based syntax of <quote>.*</quote>),
+ <quote>?</quote> represents any single character (this is equivalent to the
+ regular expression syntax of a simple <quote>.</quote>), and you can define
+ <quote>character classes</quote> in square brackets which is similar to
+ the same regular expression technique. All of this can be freely mixed:
</para>
<variablelist>
</varlistentry>
</variablelist>
+<para>
+ While flexible, this is not the sophistication of full regular expression based syntax.
+</para>
+
</sect3>
<!-- ~ End section ~ -->
<sect3><title>The Path Pattern</title>
<para>
- <application>Privoxy</application> uses Perl compatible regular expressions
+ <application>Privoxy</application> uses Perl compatible (PCRE)
+ <ulink url="http://en.wikipedia.org/wiki/Regular_expressions"><quote>Regular
+ Expression</quote></ulink> based syntax
(through the <ulink url="http://www.pcre.org/">PCRE</ulink> library) for
- matching the path.
+ matching the path portion (after the slash), and is thus more flexible.
</para>
<para>
only documents whose path starts with <literal>PaTtErN</literal> in
<emphasis>exactly</emphasis> this capitalization.
</para>
+
+<variablelist>
+ <varlistentry>
+ <term><literal>.example.com/.*</literal></term>
+ <listitem>
+ <para>
+ Is equivalent to just <quote>.example.com</quote>, since any documents
+ within that domain are matched with or without the <quote>.*</quote>
+ regular expression. This is redundant
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><literal>.example.com/.*/index.html</literal></term>
+ <listitem>
+ <para>
+ Will match any page in the domain of <quote>example.com</quote> that is
+ named <quote>index.html</quote>, and that is part of some path. For
+ example, it matches <quote>www.example.com/testing/index.html</quote> but
+ NOT <quote>www.example.com/index.html</quote> because the regular
+ expression called for at least two <quote>/'s</quote>, thus the path
+ requirement. It also would match
+ <quote>www.example.com/testing/index_html</quote>, because of the
+ special meta-character <quote>.</quote>.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><literal>.example.com/(.*/)?index\.html</literal></term>
+ <listitem>
+ <para>
+ This regular expression is conditional so it will match any page
+ named <quote>index.html</quote> regardless of path which in this case can
+ have one or more <quote>/'s</quote>. And this one must contain exactly
+ <quote>.html</quote> (but does not have to end with that!).
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><literal>.example.com/(.*/)(ads|banners?|junk)</literal></term>
+ <listitem>
+ <para>
+ This regular expression will match any path of <quote>example.com</quote>
+ that contains any of the words <quote>ads</quote>, <quote>banner</quote>,
+ <quote>banners</quote> (because of the <quote>?</quote>) or <quote>junk</quote>.
+ The path does not have to end in these words, just contain them.
+ </para>
+ </listitem>
+ </varlistentry>
+ <varlistentry>
+ <term><literal>.example.com/(.*/)(ads|banners?|junk)/.*\.(jpe?g|gif|png)$</literal></term>
+ <listitem>
+ <para>
+ This is very much the same as above, except now it must end in either
+ <quote>.jpg</quote>, <quote>.jpeg</quote>, <quote>.gif</quote> or <quote>.png</quote>. So this
+ one is limited to common image formats.
+ </para>
+ </listitem>
+ </varlistentry>
+
+</variablelist>
+<para>
+ There are many, many good examples to be found in <filename>default.action</filename>,
+ and more tutorials below in <link linkend="regex">Appendix on regular expressions</link>.
+</para>
+
+</sect3>
+
+<!-- ~ End section ~ -->
+
+
+<!-- ~~~~~ New section ~~~~~ -->
+<sect3 id="tag-pattern"><title>The Tag Pattern</title>
+
+<para>
+ Tag patterns are used to change the applying actions based on the
+ request's tags. Tags can be created with either the
+ <link linkend="CLIENT-HEADER-FILTER">client-header-tagger</link>
+ or the <link linkend="SERVER-HEADER-FILTER">server-header-tagger</link> action.
+</para>
+
+<para>
+ Tag patterns have to start with <quote>TAG:</quote>, so &my-app;
+ can tell them apart from URL patterns. Everything after the colon
+ including white space, is interpreted as a regular expression with
+ path patterns syntax, except that tag patterns aren't left-anchored
+ automatically (Privoxy doesn't silently add a <quote>^</quote>,
+ you have to do it yourself if you need it).
+</para>
+
+<para>
+ To match all requests that are tagged with <quote>foo</quote>
+ your pattern line should be <quote>TAG:^foo$</quote>,
+ <quote>TAG:foo</quote> would work as well, but it would also
+ match requests whose tags contain <quote>foo</quote> somewhere.
+</para>
+
+<para>
+ Sections can contain URL and tag patterns at the same time,
+ but tag patterns are checked after the URL patterns and thus
+ always overrule them, even if they are located before the URL patterns.
+</para>
+
+<para>
+ Once a new tag is added, Privoxy checks right away if it's matched by one
+ of the tag patterns and updates the action settings accordingly. As a result
+ tags can be used to activate other tagger actions, as long as these other
+ taggers look for headers that haven't already be parsed.
+</para>
+
+<para>
+ For example you could tag client requests which use the POST method,
+ use this tag to activate another tagger that adds a tag if cookies
+ are send, and then block based on the cookie tag. However if you'd
+ reverse the position of the described taggers, and activated the method
+ tagger based on the cookie tagger, no method tags would be created.
+ The method tagger would look for the request line, but at the time
+ the cookie tag is created the request line has already been parsed.
+</para>
+
+<para>
+ While this is a limitation you should be aware of, this kind of
+ indirection is seldom needed anyway and even the example doesn't
+ make too much sense.
+</para>
+
</sect3>
</sect2>
</para>
<para>
- There are three classes of actions:
+ Actions fall into three categories:
</para>
<para>
<para>
Later defined actions always over-ride earlier ones. So exceptions
to any rules you make, should come in the latter part of the file (or
- in a file that is processed later when using multiple actions files). For
- multi-valued actions, the actions are applied in the order they are specified.
- Actions files are processed in the order they are defined in
- <filename>config</filename> (the default installation has three actions
- files). It also quite possible for any given URL pattern to match more than
- one pattern and thus more than one set of actions!
+ in a file that is processed later when using multiple actions files such
+ as <filename>user.action</filename>). For multi-valued actions, the actions
+ are applied in the order they are specified. Actions files are processed in
+ the order they are defined in <filename>config</filename> (the default
+ installation has three actions files). It also quite possible for any given
+ URL to match more than one <quote>pattern</quote> (because of wildcards and
+ regular expressions), and thus to trigger more than one set of actions! Last
+ match wins.
</para>
<!-- start actions listing -->
<term>Effect:</term>
<listitem>
<para>
- Requests for URLs to which this action applies are blocked, i.e. the requests are not
- forwarded to the remote server, but answered locally with a substitute page or image,
- as determined by the <literal><link linkend="handle-as-image">handle-as-image</link></literal>
- and <literal><link linkend="set-image-blocker">set-image-blocker</link></literal> actions.
+ Requests for URLs to which this action applies are blocked, i.e. the
+ requests are trapped by &my-app; and the requested URL is never retrieved,
+ but is answered locally with a substitute page or image, as determined by
+ the <literal><link
+ linkend="handle-as-image">handle-as-image</link></literal>,
+ <literal><link
+ linkend="set-image-blocker">set-image-blocker</link></literal>, and
+ <literal><link
+ linkend="handle-as-empty-document">handle-as-empty-document</link></literal> actions.
+
</para>
</listitem>
</varlistentry>
<para>
It is important to understand this process, in order
to understand how <application>Privoxy</application> deals with
- ads and other unwanted content.
+ ads and other unwanted content. Blocking is a core feature, and one
+ upon which various other features depend.
</para>
<para>
The <literal><link linkend="filter">filter</link></literal>
<term>Example usage (section):</term>
<listitem>
<para>
- <screen>{+block} # Block and replace with "blocked" page
-.nasty-stuff.example.com
-
-{+block +handle-as-image} # Block and replace with image
-.ad.doubleclick.net
-.ads.r.us</screen>
+ <screen>{+block}
+# Block and replace with "blocked" page
+ .nasty-stuff.example.com
+
+{+block +handle-as-image}
+# Block and replace with image
+ .ad.doubleclick.net
+ .ads.r.us/banners/
+
+{+block +handle-as-empty-document}
+# Block and then ignore
+ adserver.exampleclick.net/.*\.js$</screen>
</para>
</listitem>
</varlistentry>
<!-- ~~~~~ New section ~~~~~ -->
-<sect3 renderas="sect4" id="content-type-overwrite">
-<!--
-new action
--->
-<title>content-type-overwrite</title>
+<sect3 renderas="sect4" id="client-header-filter">
+<title>client-header-filter</title>
<variablelist>
<varlistentry>
<term>Typical use:</term>
<listitem>
- <para>Stop useless download menus from popping up, or change the browser's rendering mode</para>
+ <para>
+ Rewrite or remove single client headers.
+ </para>
</listitem>
</varlistentry>
<term>Effect:</term>
<listitem>
<para>
- Replaces the <quote>Content-Type:</quote> HTTP server header.
+ All client headers to which this action applies are filtered on-the-fly through
+ the specified regular expression based substitutions.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>Type:</term>
- <!-- Boolean, Parameterized, Multi-value -->
+ <!-- boolean, parameterized, Multi-value -->
<listitem>
<para>Parameterized.</para>
</listitem>
<term>Parameter:</term>
<listitem>
<para>
- Any string.
- </para>
+ The name of a client-header filter, as defined in one of the
+ <link linkend="filter-file">filter files</link>.
+ </para>
</listitem>
</varlistentry>
<term>Notes:</term>
<listitem>
<para>
- The <quote>Content-Type:</quote> HTTP server header is used by the
- browser to decide what to do with the document. The value of this
- header can cause the browser to open a download menu instead of
- displaying the document by itself, even if the document's format is
- supported by the browser.
- </para>
- <para>
- The declared content type can also affect which rendering mode
- the browser chooses. If XHTML is delivered as <quote>text/html</quote>,
- many browsers treat it as yet another broken HTML document.
- If it is send as <quote>application/xml</quote>, browsers with
- XHTML support will only display it, if the syntax is correct.
- </para>
- <para>
- If you see a web site that proudly uses XHTML buttons, but sets
- <quote>Content-Type: text/html</quote>, you can use &my-app;
- to overwrite it with <quote>application/xml</quote> and validate
- the web master's claim inside your XHTML-supporting browser.
- If the syntax is incorrect, the browser will complain loudly.
- </para>
- <para>
- You can also go the opposite direction: if your browser prints
- error messages instead of rendering a document falsely declared
- as XHTML, you can overwrite the content type with
- <quote>text/html</quote> and have it rendered as broken HTML document.
- </para>
- <para>
- By default <literal>content-type-overwrite</literal> only replaces
- <quote>Content-Type:</quote> headers that look like some kind of text.
- If you want to overwrite it unconditionally, you have to combine it with
- <literal><link linkend="force-text-mode">force-text-mode</link></literal>.
- This limitation exists for a reason, think twice before circumventing it.
+ Client-header filters are applied to each header on its own, not to
+ all at once. This makes it easier to diagnose problems, but on the downside
+ you can't write filters that only change header x if header y's value is z.
+ You can do that by using tags though.
</para>
<para>
- Most of the time it's easier to enable
- <literal><link linkend="filter-server-headers">filter-server-headers</link></literal>
- and replace this action with a custom regular expression. It allows you
- to activate it for every document of a certain site and it will still
- only replace the content types you aimed at.
+ Client-header filters are executed after the other header actions have finished
+ and use their output as input.
</para>
<para>
- Of course you can apply <literal>content-type-overwrite</literal>
- to a whole site and then make URL based exceptions, but it's a lot
- more work to get the same precision.
+ Please refer to the <link linkend="filter-file">filter file chapter</link>
+ to learn which client-header filters are available by default, and how to
+ create your own.
</para>
- </listitem>
+
</varlistentry>
<varlistentry>
- <term>Example usage (sections):</term>
+ <term>Example usage (section):</term>
<listitem>
<para>
- <screen># Check if www.example.net/ really uses valid XHTML
-{+content-type-overwrite {application/xml}}
-www.example.net/
-# but leave the content type unmodified if the URL looks like a style sheet
-{-content-type-overwrite}
-www.example.net/*.\.css$
-www.example.net/*.style
-</screen>
- </para>
+ <screen>
+{+client-header-filter{hide-tor-exit-notation}}
+.exit/
+ </screen>
+ </para>
</listitem>
</varlistentry>
+
</variablelist>
</sect3>
<!-- ~~~~~ New section ~~~~~ -->
-<sect3 renderas="sect4" id="crunch-client-header">
-<!--
-new action
--->
-<title>crunch-client-header</title>
+<sect3 renderas="sect4" id="client-header-tagger">
+<title>client-header-tagger</title>
<variablelist>
<varlistentry>
<term>Typical use:</term>
<listitem>
- <para>Remove a client header <application>Privoxy</application> has no dedicated action for.</para>
+ <para>
+ Block requests based on their headers.
+ </para>
</listitem>
</varlistentry>
<term>Effect:</term>
<listitem>
<para>
- Deletes every header sent by the client that contains the string the user supplied as parameter.
+ Client headers to which this action applies are filtered on-the-fly through
+ the specified regular expression based substitutions, the result is used as
+ tag.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>Type:</term>
- <!-- Boolean, Parameterized, Multi-value -->
+ <!-- boolean, parameterized, Multi-value -->
<listitem>
<para>Parameterized.</para>
</listitem>
<term>Parameter:</term>
<listitem>
<para>
- Any string.
- </para>
+ The name of a client-header tagger, as defined in one of the
+ <link linkend="filter-file">filter files</link>.
+ </para>
</listitem>
</varlistentry>
<term>Notes:</term>
<listitem>
<para>
- This action allows you to block client headers for which no dedicated
- <application>Privoxy</application> action exists.
- <application>Privoxy</application> will remove every client header that
- contains the string you supplied as parameter.
- </para>
- <para>
- Regular expressions are <emphasis>not supported</emphasis> and you can't
- use this action to block different headers in the same request, unless
- they contain the same string.
+ Client-header taggers are applied to each header on its own,
+ and as the header isn't modified, each tagger <quote>sees</quote>
+ the original.
</para>
<para>
- <literal>crunch-client-header</literal> is only meant for quick tests.
- If you have to block several different headers, or only want to modify
- parts of them, you should enable
- <literal><link linkend="filter-client-headers">filter-client-headers</link></literal>
- and create your own filter.
+ Client-header taggers are the first actions that are executed
+ and their tags can be used to control every other action.
</para>
- <warning>
- <para>
- Don't block any header without understanding the consequences.
- </para>
- </warning>
- </listitem>
+
+ </varlistentry>
+
+ <varlistentry>
+ <term>Example usage (section):</term>
+ <listitem>
+ <para>
+ <screen>
+# Tag every request with the User-Agent header
+{+client-header-filter{user-agent}}
+/
+ </screen>
+ </para>
+ </listitem>
+ </varlistentry>
+
+</variablelist>
+</sect3>
+
+
+<!-- ~~~~~ New section ~~~~~ -->
+<sect3 renderas="sect4" id="content-type-overwrite">
+<!--
+new action
+-->
+<title>content-type-overwrite</title>
+
+<variablelist>
+ <varlistentry>
+ <term>Typical use:</term>
+ <listitem>
+ <para>Stop useless download menus from popping up, or change the browser's rendering mode</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Effect:</term>
+ <listitem>
+ <para>
+ Replaces the <quote>Content-Type:</quote> HTTP server header.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Type:</term>
+ <!-- Boolean, Parameterized, Multi-value -->
+ <listitem>
+ <para>Parameterized.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Parameter:</term>
+ <listitem>
+ <para>
+ Any string.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Notes:</term>
+ <listitem>
+ <para>
+ The <quote>Content-Type:</quote> HTTP server header is used by the
+ browser to decide what to do with the document. The value of this
+ header can cause the browser to open a download menu instead of
+ displaying the document by itself, even if the document's format is
+ supported by the browser.
+ </para>
+ <para>
+ The declared content type can also affect which rendering mode
+ the browser chooses. If XHTML is delivered as <quote>text/html</quote>,
+ many browsers treat it as yet another broken HTML document.
+ If it is send as <quote>application/xml</quote>, browsers with
+ XHTML support will only display it, if the syntax is correct.
+ </para>
+ <para>
+ If you see a web site that proudly uses XHTML buttons, but sets
+ <quote>Content-Type: text/html</quote>, you can use &my-app;
+ to overwrite it with <quote>application/xml</quote> and validate
+ the web master's claim inside your XHTML-supporting browser.
+ If the syntax is incorrect, the browser will complain loudly.
+ </para>
+ <para>
+ You can also go the opposite direction: if your browser prints
+ error messages instead of rendering a document falsely declared
+ as XHTML, you can overwrite the content type with
+ <quote>text/html</quote> and have it rendered as broken HTML document.
+ </para>
+ <para>
+ By default <literal>content-type-overwrite</literal> only replaces
+ <quote>Content-Type:</quote> headers that look like some kind of text.
+ If you want to overwrite it unconditionally, you have to combine it with
+ <literal><link linkend="force-text-mode">force-text-mode</link></literal>.
+ This limitation exists for a reason, think twice before circumventing it.
+ </para>
+ <para>
+ Most of the time it's easier to replace this action with a custom
+ <literal><link linkend="server-header-filter">server-header filter</link></literal>.
+ It allows you to activate it for every document of a certain site and it will still
+ only replace the content types you aimed at.
+ </para>
+ <para>
+ Of course you can apply <literal>content-type-overwrite</literal>
+ to a whole site and then make URL based exceptions, but it's a lot
+ more work to get the same precision.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Example usage (sections):</term>
+ <listitem>
+ <para>
+ <screen># Check if www.example.net/ really uses valid XHTML
+{ +content-type-overwrite{application/xml} }
+www.example.net/
+
+# but leave the content type unmodified if the URL looks like a style sheet
+{-content-type-overwrite}
+www.example.net/.*\.css$
+www.example.net/.*style
+</screen>
+ </para>
+ </listitem>
+ </varlistentry>
+</variablelist>
+</sect3>
+
+
+<!-- ~~~~~ New section ~~~~~ -->
+<sect3 renderas="sect4" id="crunch-client-header">
+<!--
+new action
+-->
+<title>crunch-client-header</title>
+
+<variablelist>
+ <varlistentry>
+ <term>Typical use:</term>
+ <listitem>
+ <para>Remove a client header <application>Privoxy</application> has no dedicated action for.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Effect:</term>
+ <listitem>
+ <para>
+ Deletes every header sent by the client that contains the string the user supplied as parameter.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Type:</term>
+ <!-- Boolean, Parameterized, Multi-value -->
+ <listitem>
+ <para>Parameterized.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Parameter:</term>
+ <listitem>
+ <para>
+ Any string.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Notes:</term>
+ <listitem>
+ <para>
+ This action allows you to block client headers for which no dedicated
+ <application>Privoxy</application> action exists.
+ <application>Privoxy</application> will remove every client header that
+ contains the string you supplied as parameter.
+ </para>
+ <para>
+ Regular expressions are <emphasis>not supported</emphasis> and you can't
+ use this action to block different headers in the same request, unless
+ they contain the same string.
+ </para>
+ <para>
+ <literal>crunch-client-header</literal> is only meant for quick tests.
+ If you have to block several different headers, or only want to modify
+ parts of them, you should use a
+ <literal><link linkend="client-header-filter">client-header filter</link></literal>.
+ </para>
+ <warning>
+ <para>
+ Don't block any header without understanding the consequences.
+ </para>
+ </warning>
+ </listitem>
</varlistentry>
<varlistentry>
<listitem>
<para>
<screen># Block the non-existent "Privacy-Violation:" client header
-{+crunch-client-header {Privacy-Violation:}}
+{ +crunch-client-header{Privacy-Violation:} }
/
</screen>
</para>
<listitem>
<para>
<screen># Let the browser revalidate cached documents without being tracked across sessions
-{+hide-if-modified-since {-60} \
-+overwrite-last-modified {randomize} \
-+crunch-if-none-match}
+{ +hide-if-modified-since{-60} \
+ +overwrite-last-modified{randomize} \
+ +crunch-if-none-match}
/ </screen>
</para>
</listitem>
<para>
<literal>crunch-server-header</literal> is only meant for quick tests.
If you have to block several different headers, or only want to modify
- parts of them, you should enable
- <literal><link linkend="filter-server-headers">filter-server-headers</link></literal>
- and create your own filter.
+ parts of them, you should use a custom
+ <literal><link linkend="server-header-filter">server-header filter</link></literal>.
</para>
<warning>
<para>
<listitem>
<para>
<screen># Crunch server headers that try to prevent caching
-{+crunch-server-header {no-cache}}
+{ +crunch-server-header{no-cache} }
/ </screen>
</para>
</listitem>
followed by another parameter. <literal>fast-redirects</literal> doesn't know that
and will cause a redirect to <quote>http://www.example.net/&foo=bar</quote>.
Depending on the target server configuration, the parameter will be silently ignored
- or lead to a <quote>page not found</quote> error. It is possible to fix these redirected
- requests with <literal><link linkend="filter-client-headers">filter-client-headers</link></literal>
- but it requires a little effort.
+ or lead to a <quote>page not found</quote> error. You can prevent this problem by
+ first using the <literal><link linkend="redirect">redirect</link></literal> action
+ to remove the last part of the URL, but it requires a little effort.
</para>
<para>
To detect a redirection URL, <literal>fast-redirects</literal> only
<term>Example usage:</term>
<listitem>
<para>
- <screen>+fast-redirects{simple-check}</screen>
- </para>
- <para>
- <screen>+fast-redirects{check-decoded-url}</screen>
+ <screen>
+ { +fast-redirects{simple-check} }
+ .example.com
+
+ { +fast-redirects{check-decoded-url} }
+ another.example.com/testing</screen>
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>Typical use:</term>
<listitem>
- <para>Get rid of HTML and JavaScript annoyances, banner advertisements (by size), do fun text replacements, etc.</para>
+ <para>Get rid of HTML and JavaScript annoyances, banner advertisements (by size),
+ do fun text replacements, add personalized effects, etc.</para>
</listitem>
</varlistentry>
<term>Effect:</term>
<listitem>
<para>
- All files of text-based type, most notably HTML and JavaScript, to which this
- action applies, are filtered on-the-fly through the specified regular expression
- based substitutions. (Note: as of version 3.0.3 plain text documents
+ All instances of text-based type, most notably HTML and JavaScript, to which
+ this action applies, can be filtered on-the-fly through the specified regular
+ expression based substitutions. (Note: as of version 3.0.3 plain text documents
are exempted from filtering, because web servers often use the
- <literal>text/plain</literal> MIME type for all files whose type they
- don't know.) By default, filtering works only on the document content
- itself, not the headers.
+ <literal>text/plain</literal> MIME type for all files whose type they don't know.)
</para>
</listitem>
</varlistentry>
<term>Parameter:</term>
<listitem>
<para>
- The name of a filter, as defined in the <link linkend="filter-file">filter file</link>.
+ The name of a content filter, as defined in the <link linkend="filter-file">filter file</link>.
Filters can be defined in one or more files as defined by the
<literal><link linkend="filterfile">filterfile</link></literal>
option in the <link linkend="config">config file</link>.
</para>
<para>
When used in its negative form,
- and without parameters, filtering is completely disabled.
+ and without parameters, <emphasis>all</emphasis> filtering is completely disabled.
</para>
</listitem>
</varlistentry>
noticeable on slower connections.
</para>
<para>
- This is very powerful feature, and <quote>rolling your own</quote>
- filters requires a knowledge of regular expressions and HTML.
+ <quote>Rolling your own</quote>
+ filters requires a knowledge of
+ <ulink url="http://en.wikipedia.org/wiki/Regular_expressions"><quote>Regular
+ Expressions</quote></ulink> and
+ <ulink url="http://en.wikipedia.org/wiki/Html"><quote>HTML</quote></ulink>.
+ This is very powerful feature, and potentially very intrusive.
+ Filters should be used with caution, and where an equivalent
+ <quote>action</quote> is not available.
</para>
<para>
The amount of data that can be filtered is limited to the
data, and all pending data, is passed through unfiltered.
</para>
<para>
- Inadequate MIME types, such as zipped files, are not filtered at all.
+ Inappropriate MIME types, such as zipped files, are not filtered at all.
(Again, only text-based types except plain text). Encrypted SSL data
(from HTTPS servers) cannot be filtered either, since this would violate
the integrity of the secure transaction. In some situations it might
be necessary to protect certain text, like source code, from filtering
- by defining appropriate <literal>-filter</literal> sections.
+ by defining appropriate <literal>-filter</literal> exceptions.
+ </para>
+ <para>
+ Compressed content can't be filtered either, unless &my-app;
+ is compiled with zlib support (requires at least &my-app; 3.0.7),
+ in which case &my-app; will decompress the content before filtering
+ it.
</para>
<para>
- At this time, <application>Privoxy</application> cannot (yet!) uncompress compressed
- documents. If you want filtering to work on all documents, even those that
- would normally be sent compressed, use the
- <literal><link linkend="prevent-compression">prevent-compression</link></literal>
+ If you use a &my-app; version without zlib support, but want filtering to work on
+ as much documents as possible, even those that would normally be sent compressed,
+ you must use the <literal><link linkend="prevent-compression">prevent-compression</link></literal>
action in conjunction with <literal>filter</literal>.
</para>
<para>
- Filtering can achieve some of the same effects as the
+ Content filtering can achieve some of the same effects as the
<literal><link linkend="block">block</link></literal>
action, i.e. it can be used to block ads and banners. But the mechanism
works quite differently. One effective use, is to block ad banners
</para>
<para>
<anchor id="filter-unsolicited-popups">
- <screen>+filter{unsolicited-popups} # Disable only unsolicited pop-up windows</screen>
+ <screen>+filter{unsolicited-popups} # Disable only unsolicited pop-up windows. Useful if your browser lacks this ability.</screen>
</para>
<para>
<anchor id="filter-all-popups">
- <screen>+filter{all-popups} # Kill all popups in JavaScript and HTML</screen>
+ <screen>+filter{all-popups} # Kill all popups in JavaScript and HTML. Useful if your browser lacks this ability.</screen>
</para>
<para>
<anchor id="filter-img-reorder">
<anchor id="filter-ie-exploits">
<screen>+filter{ie-exploits} # Disable some known Internet Explorer bug exploits</screen>
</para>
- </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!-- ~~~~~ New section ~~~~~ -->
-<sect3 renderas="sect4" id="filter-client-headers">
-<title>filter-client-headers</title>
-
-<variablelist>
- <varlistentry>
- <term>Typical use:</term>
- <listitem>
<para>
- To apply filtering to the client's (browser's) headers
+ <anchor id="filter-site-specifics">
+ <screen>+filter{site-specifics} # Custom filters for specific site related problems</screen>
</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Effect:</term>
- <listitem>
<para>
- By default, <application>Privoxy's</application> filters only apply
- to the document content itself. This will extend those filters to
- include the client's headers as well.
+ <anchor id="filter-google">
+ <screen>+filter{google} # Removes text ads and other Google specific improvements</screen>
</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Type:</term>
- <!-- boolean, parameterized, Multi-value -->
- <listitem>
- <para>Boolean.</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Parameter:</term>
- <listitem>
<para>
- N/A
+ <anchor id="filter-yahoo">
+ <screen>+filter{yahoo} # Removes text ads and other Yahoo specific improvements</screen>
</para>
- </listitem>
- </varlistentry>
-
-<varlistentry>
- <term>Notes:</term>
- <listitem>
<para>
- Regular expressions can be used to filter headers as well. Check your
- filters closely before activating this action, as it can easily lead to broken
- requests.
- </para>
- <para>
- These filters are applied to each header on its own, not to them
- all at once. This makes it easier to diagnose problems, but on the downside
- you can't write filters that only change header x if header y's value is
- z.
+ <anchor id="filter-msn">
+ <screen>+filter{msn} # Removes text ads and other MSN specific improvements</screen>
</para>
<para>
- The filters are used after the other header actions have finished and can
- use their output as input.
+ <anchor id="filter-blogspot">
+ <screen>+filter{blogspot} # Cleans up Blogspot blogs</screen>
</para>
-
<para>
- Whenever possible one should specify <literal>^</literal>,
- <literal>$</literal>, the whole header name and the colon, to make sure
- the filter doesn't cause havoc to other headers or the
- page itself. For example if you want to transform
- <application>Galeon</application> User-Agents to
- <application>Firefox</application> User-Agents you
- shouldn't use:
-</para>
-<para>
-<screen>
-s@Galeon/\d\.\d\.\d @@
-</screen>
-</para><para>
- but:
-</para><para>
-<screen>
-s@^(User-Agent:.*) Galeon/\d\.\d\.\d (Firefox/\d\.\d\.\d\.\d)$@$1 $2@
-</screen>
-</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Example usage (section):</term>
- <listitem>
- <para>
- <screen>
-{+filter-client-headers +filter{test_filter}}
-problem-host.example.com
- </screen>
- </para>
+ <anchor id="filter-no-ping">
+ <screen>+filter{no-ping} # Removes non-standard ping attributes from anchor and area tags</screen>
+ </para>
</listitem>
</varlistentry>
-
</variablelist>
</sect3>
<!-- ~~~~~ New section ~~~~~ -->
-<sect3 renderas="sect4" id="filter-server-headers">
-<title>filter-server-headers</title>
-
+<sect3 renderas="sect4" id="force-text-mode">
+<title>force-text-mode</title>
+<!--
+new action
+-->
<variablelist>
<varlistentry>
<term>Typical use:</term>
<listitem>
- <para>
- To apply filtering to the server's headers
- </para>
+ <para>Force <application>Privoxy</application> to treat a document as if it was in some kind of <emphasis>text</emphasis> format. </para>
</listitem>
</varlistentry>
<term>Effect:</term>
<listitem>
<para>
- By default, <application>Privoxy's</application> filters only apply
- to the document content itself. This will extend those filters to
- include the server's headers as well.
- </para>
+ Declares a document as text, even if the <quote>Content-Type:</quote> isn't detected as such.
+ </para>
</listitem>
</varlistentry>
<varlistentry>
<term>Type:</term>
- <!-- boolean, parameterized, Multi-value -->
+ <!-- Boolean, Parameterized, Multi-value -->
<listitem>
<para>Boolean.</para>
</listitem>
</para>
</listitem>
</varlistentry>
-
-<varlistentry>
+
+ <varlistentry>
<term>Notes:</term>
<listitem>
<para>
- Similar to <literal>filter-client-headers</literal>, but works on
- the server instead. To filter both server and client, use both.
- </para>
- <para>
- As with <literal>filter-client-headers</literal>, check your
- filters before activating this action, as it can easily lead to broken
- requests.
- </para>
- <para>
- These filters are applied to each header on its own, not to them
- all at once. This makes it easier to diagnose problems, but on the downside
- you can't write filters that only change header x if header y's value is
- z.
- </para>
- <para>
- The filters are used after the other header actions have finished and can
- use their output as input.
- </para>
- <para>
- Remember too, whenever possible one should specify <literal>^</literal>,
- <literal>$</literal>, the whole header name and the colon, to make sure
- the filter doesn't cause havoc to other headers or the
- page itself. See above for example.
+ As explained <literal><link linkend="filter">above</link></literal>,
+ <application>Privoxy</application> tries to only filter files that are
+ in some kind of text format. The same restrictions apply to
+ <literal><link linkend="content-type-overwrite">content-type-overwrite</link></literal>.
+ <literal>force-text-mode</literal> declares a document as text,
+ without looking at the <quote>Content-Type:</quote> first.
</para>
-
+ <warning>
+ <para>
+ Think twice before activating this action. Filtering binary data
+ with regular expressions can cause file damage.
+ </para>
+ </warning>
</listitem>
</varlistentry>
-
+
<varlistentry>
- <term>Example usage (section):</term>
+ <term>Example usage:</term>
<listitem>
+ <para>
<screen>
-{+filter-server-headers +filter{test_filter}}
-problem-host.example.com
- </screen>
- </para>
++force-text-mode
+ </screen>
+ </para>
</listitem>
</varlistentry>
-
</variablelist>
</sect3>
<!-- ~~~~~ New section ~~~~~ -->
-<sect3 renderas="sect4" id="force-text-mode">
-<title>force-text-mode</title>
+<sect3 renderas="sect4" id="forward-override">
+<title>forward-override</title>
<!--
new action
-->
<varlistentry>
<term>Typical use:</term>
<listitem>
- <para>Force <application>Privoxy</application> to treat a document as if it was in some kind of <emphasis>text</emphasis> format. </para>
+ <para>Change the forwarding settings based on User-Agent or request origin</para>
</listitem>
</varlistentry>
<term>Effect:</term>
<listitem>
<para>
- Declares a document as text, even if the <quote>Content-Type:</quote> isn't detected as such.
+ Overrules the forward directives in the configuration files.
</para>
</listitem>
</varlistentry>
<term>Type:</term>
<!-- Boolean, Parameterized, Multi-value -->
<listitem>
- <para>Boolean.</para>
+ <para>Multi-value.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>Parameter:</term>
<listitem>
- <para>
- N/A
- </para>
+ <itemizedlist>
+ <listitem>
+ <para><quote>forward .</quote> to use a direct connection without any additional proxies.</para>
+ </listitem>
+ <listitem>
+ <para>
+ <quote>forward 127.0.0.1:8123</quote> to use the HTTP proxy listening at 127.0.0.1 port 8123.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ <quote>forward-socks4a 127.0.0.1:9050 .</quote> to use the socks4a proxy listening at 127.0.0.1 port 9050.
+ Replace <quote>forward-socks4a</quote> with <quote>forward-socks4</quote> to use a socks4 connection (with local DNS
+ resolution) instead.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ <quote>forward-socks4a 127.0.0.1:9050 proxy.example.org:8000</quote> to use the socks4a proxy
+ listening at 127.0.0.1 port 9050 to reach the HTTP proxy listening at proxy.example.org port 8000.
+ Replace <quote>forward-socks4a</quote> with <quote>forward-socks4</quote> to use a socks4 connection (with local DNS
+ resolution) instead.
+ </para>
+ </listitem>
+ </itemizedlist>
</listitem>
</varlistentry>
<term>Notes:</term>
<listitem>
<para>
- As explained <literal><link linkend="filter">above</link></literal>,
- <application>Privoxy</application> tries to only filter files that are
- in some kind of text format. The same restrictions apply to
- <literal><link linkend="content-type-overwrite">content-type-overwrite</link></literal>.
- <literal>force-text-mode</literal> declares a document as text,
- without looking at the <quote>Content-Type:</quote> first.
+ This action takes parameters similar to the <!-- I hope this link actual works -->
+ <link linkend="forwarding">forward</link> directives in the configuration
+ file, but without the URL pattern. It can be used as replacement, but normally it's only
+ used in cases where matching based on the request URL isn't sufficient.
</para>
<warning>
<para>
- Think twice before activating this action. Filtering binary data
- with regular expressions can cause file damage.
+ Please read the description for the <link linkend="forwarding">forward</link> directives before
+ using this action. Forwarding to the wrong people will reduce your privacy and increase the
+ chances of man-in-the-middle attacks.
+ </para>
+ <para>
+ If the ports are missing or invalid, default values will be used. This might change
+ in the future and you shouldn't rely on it. Otherwise incorrect syntax causes Privoxy
+ to exit.
+ </para>
+ <para>
+ Use the <ulink url="http://config.privoxy.org/show-url-info">show-url-info CGI page</ulink>
+ to verify that your forward settings do what you thought the do.
</para>
</warning>
</listitem>
<listitem>
<para>
<screen>
-+force-text-mode
+# Always use direct connections for requests previously tagged as
+# <quote>User-Agent: fetch libfetch/2.0</quote> and make sure
+# resuming downloads continues to work.
+# This way you can continue to use Tor for your normal browsing,
+# without overloading the Tor network with your FreeBSD ports updates
+# or downloads of bigger files like ISOs.
+{+forward-override{forward .} \
+ -hide-if-modified-since \
+ -overwrite-last-modified \
+}
+TAG:^User-Agent: fetch libfetch/2.0$
</screen>
</para>
</listitem>
<para>
This action alone doesn't do anything noticeable. It just marks URLs.
If the <literal><link linkend="block">block</link></literal> action <emphasis>also applies</emphasis>,
- the presence or absence of this mark decides whether an HTML <quote>blocked</quote>
+ the presence or absence of this mark decides whether an HTML <quote>BLOCKED</quote>
page, or an empty document will be sent to the client as a substitute for the blocked content.
The <emphasis>empty</emphasis> document isn't literally empty, but actually contains a single space.
</para>
Some browsers complain about syntax errors if JavaScript documents
are blocked with <application>Privoxy's</application>
default HTML page; this option can be used to silence them.
+ And of course this action can also be used to eliminate the &my-app;
+ BLOCKED message in frames.
</para>
<para>
The content type for the empty document can be specified with
<listitem>
<para>
<screen># Disarm the download link in Sourceforge's patch tracker
-{-filter\
-+content-type-overwrite {text/plain}\
-+hide-content-disposition {block} }
-.sourceforge.net/tracker/download.php</screen>
+{ -filter \
+ +content-type-overwrite{text/plain}\
+ +hide-content-disposition{block} }
+ .sourceforge.net/tracker/download\.php</screen>
</para>
</listitem>
</varlistentry>
<listitem>
<para>
<screen># Let the browser revalidate without being tracked across sessions
-{+hide-if-modified-since {-60}\
-+overwrite-last-modified {randomize}\
-+crunch-if-none-match}
+{ +hide-if-modified-since{-60} \
+ +overwrite-last-modified{randomize} \
+ +crunch-if-none-match}
/</screen>
</para>
</listitem>
Killing all pop-ups unconditionally is problematic. Many shops and banks rely on
pop-ups to display forms, shopping carts etc, and the <literal><link
linkend="FILTER-UNSOLICITED-POPUPS">filter{<replaceable>unsolicited-popups</replaceable>}</link>
- </literal> does a fairly good job of catching only the unwanted ones.
+ </literal> does a better job of catching only the unwanted ones.
</para>
<para>
If the only kind of pop-ups that you want to kill are exit consoles (those
linkend="filter">filter</link>{<replaceable>js-annoyances</replaceable>}</literal>
instead.
</para>
+ <para>
+ This action is most appropriate for browsers that don't have any controls
+ for unwanted pop-ups. Not recommended for general usage.
+ </para>
<!--
<para>
<listitem>
<para>
More and more websites send their content compressed by default, which
- is generally a good idea and saves bandwidth. But for the <literal><link
+ is generally a good idea and saves bandwidth. But the <literal><link
linkend="filter">filter</link></literal>, <literal><link linkend="deanimate-gifs">deanimate-gifs</link></literal>
- and <literal><link linkend="kill-popups">kill-popups</link></literal> actions to work,
- <application>Privoxy</application> needs access to the uncompressed data.
- Unfortunately, <application>Privoxy</application> can't yet(!) uncompress, filter, and
- re-compress the content on the fly. So if you want to ensure that all websites, including
- those that normally compress, can be filtered, you need to use this action.
+ and <literal><link linkend="kill-popups">kill-popups</link></literal> actions need
+ access to the uncompressed data.
+ </para>
+ <para>
+ When compiled with zlib support (available since &my-app; 3.0.7), content that should be
+ filtered is decompressed on-the-fly and you don't have to worry about this action.
+ If you are using an older &my-app; version, or one that hasn't been compiled with zlib
+ support, this action can be used to convince the server to send the content uncompressed.
+ </para>
+ <para>
+ Most text-based instances compress very well, the size is seldom decreased by less than 50%,
+ for markup-heavy instances like news feeds saving more than 90% of the original size isn't
+ unusual.
</para>
<para>
- This will slow down transfers from those websites, though. If you use any of the above-mentioned
- actions, you will typically want to use <literal>prevent-compression</literal> in conjunction
- with them.
+ Not using compression will therefore slow down the transfer, and you should only
+ enable this action if you really need it. As of &my-app; 3.0.7 it's disabled in all
+ predefined action settings.
</para>
<para>
Note that some (rare) ill-configured sites don't handle requests for uncompressed
- documents correctly (they send an empty document body). If you use <literal>prevent-compression</literal>
- per default, you'll have to add exceptions for those sites. See the example for how to do that.
+ documents correctly. Broken PHP applications tend to send an empty document body,
+ some IIS versions only send the beginning of the content. If you enable
+ <literal>prevent-compression</literal> per default, you might want to add
+ exceptions for those sites. See the example for how to do that.
</para>
</listitem>
</varlistentry>
<term>Example usage (sections):</term>
<listitem>
<para>
- <screen># Set default:
+ <screen>
+# Selectively turn off compression, and enable a filter
#
-{+prevent-compression}
-/ # Match all sites
+{ +filter{tiny-textforms} +prevent-compression }
+# Match only these sites
+ .google.
+ sourceforge.net
+ sf.net
-# Make exceptions for ill sites:
+# Or instead, we could set a universal default:
#
-{-prevent-compression}
-www.debianhelp.org
-www.pclinuxonline.com</screen>
+{ +prevent-compression }
+ / # Match all sites
+
+# Then maybe make exceptions for broken sites:
+#
+{ -prevent-compression }
+.compusa.com/</screen>
</para>
</listitem>
</varlistentry>
makes it impossible and the browser can still revalidate cached documents.
</para>
<para>
- <quote>reset-to-request-time</quote> overwrites the value of the
- <quote>Last-Modified:</quote> header with the current time. You could use
- this option together with
- <literal><link linkend="hide-if-modified-since">hided-if-modified-since</link></literal>
- to further customize your random range.
+ <quote>reset-to-request-time</quote> overwrites the value of the
+ <quote>Last-Modified:</quote> header with the current time. You could use
+ this option together with
+ <literal><link linkend="hide-if-modified-since">hided-if-modified-since</link></literal>
+ to further customize your random range.
+ </para>
+ <para>
+ The preferred parameter here is <quote>randomize</quote>. It is safe
+ to use, as long as the time settings are more or less correct.
+ If the server sets the <quote>Last-Modified:</quote> header to the time
+ of the request, the random range becomes zero and the value stays the same.
+ Therefore you should later randomize it a second time with
+ <literal><link linkend="hide-if-modified-since">hided-if-modified-since</link></literal>,
+ just to be sure.
+ </para>
+ <para>
+ It is also recommended to use this action together with
+ <literal><link linkend="crunch-if-none-match">crunch-if-none-match</link></literal>.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Example usage:</term>
+ <listitem>
+ <para>
+ <screen># Let the browser revalidate without being tracked across sessions
+{ +hide-if-modified-since{-60} \
+ +overwrite-last-modified{randomize} \
+ +crunch-if-none-match}
+/</screen>
+ </para>
+ </listitem>
+ </varlistentry>
+</variablelist>
+</sect3>
+
+
+<!-- ~~~~~ New section ~~~~~ -->
+<sect3 renderas="sect4" id="redirect">
+<title>redirect</title>
+<!--
+new action
+-->
+<variablelist>
+ <varlistentry>
+ <term>Typical use:</term>
+ <listitem>
+ <para>
+ Redirect requests to other sites.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Effect:</term>
+ <listitem>
+ <para>
+ Convinces the browser that the requested document has been moved
+ to another location and the browser should get it from there.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Type:</term>
+ <!-- Boolean, Parameterized, Multi-value -->
+ <listitem>
+ <para>Parameterized</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Parameter:</term>
+ <listitem>
+ <para>
+ An absolute URL or a single pcrs command.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Notes:</term>
+ <listitem>
+ <para>
+ Requests to which this action applies are answered with a
+ HTTP redirect to URLs of your choosing. The new URL is
+ either provided as parameter, or derived by applying a
+ single pcrs command to the original URL.
+ </para>
+ <para>
+ This action will be ignored if you use it together with
+ <literal><link linkend="block">block</link></literal>.
+ It can be combined with
+ <literal><link linkend="fast-redirects">fast-redirects{check-decoded-url}</link></literal>
+ to redirect to a decoded version of a rewritten URL.
+ </para>
+ <para>
+ Use this action carefully, make sure not to create redirection loops
+ and be aware that using your own redirects might make it
+ possible to fingerprint your requests.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Example usages:</term>
+ <listitem>
+ <para>
+ <screen># Replace example.com's style sheet with another one
+{ +redirect{http://localhost/css-replacements/example.com.css} }
+ example.com/stylesheet\.css
+
+# Create a short, easy to remember nickname for a favorite site
+# (relies on the browser accept and forward invalid URLs to &my-app;)
+{ +redirect{http://www.privoxy.org/user-manual/actions-file.html} }
+ a
+
+# Always use the expanded view for Undeadly.org articles
+# (Note the $ at the end of the URL pattern to make sure
+# the request for the rewritten URL isn't redirected as well)
+{+redirect{s@$@&mode=expanded@}}
+undeadly.org/cgi\?action=article&sid=\d*$</screen>
+ </para>
+ </listitem>
+ </varlistentry>
+
+</variablelist>
+</sect3>
+
+
+<!-- ~~~~~ New section ~~~~~ -->
+<sect3 renderas="sect4" id="send-vanilla-wafer">
+<title>send-vanilla-wafer</title>
+
+<variablelist>
+ <varlistentry>
+ <term>Typical use:</term>
+ <listitem>
+ <para>
+ Feed log analysis scripts with useless data.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Effect:</term>
+ <listitem>
+ <para>
+ Sends a cookie with each request stating that you do not accept any copyright
+ on cookies sent to you, and asking the site operator not to track you.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Type:</term>
+ <!-- Boolean, Parameterized, Multi-value -->
+ <listitem>
+ <para>Boolean.</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Parameter:</term>
+ <listitem>
+ <para>
+ N/A
</para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>Notes:</term>
+ <listitem>
<para>
- The preferred parameter here is <quote>randomize</quote>. It is safe
- to use, as long as the time settings are more or less correct.
- If the server sets the <quote>Last-Modified:</quote> header to the time
- of the request, the random range becomes zero and the value stays the same.
- Therefore you should later randomize it a second time with
- <literal><link linkend="hide-if-modified-since">hided-if-modified-since</link></literal>,
- just to be sure.
+ The vanilla wafer is a (relatively) unique header and could conceivably be used to track you.
</para>
<para>
- It is also recommended to use this action together with
- <literal><link linkend="crunch-if-none-match">crunch-if-none-match</link></literal>.
+ This action is rarely used and not enabled in the default configuration.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>Example usage:</term>
<listitem>
- <para>
- <screen># Let the browser revalidate without being tracked across sessions
-{+hide-if-modified-since {-60}\
-+overwrite-last-modified {randomize}\
-+crunch-if-none-match}
-/</screen>
+ <para>
+ <screen>+send-vanilla-wafer</screen>
</para>
</listitem>
</varlistentry>
+
</variablelist>
</sect3>
<!-- ~~~~~ New section ~~~~~ -->
-<sect3 renderas="sect4" id="redirect">
-<title>redirect</title>
-<!--
-new action
--->
+<sect3 renderas="sect4" id="send-wafer">
+<title>send-wafer</title>
+
<variablelist>
<varlistentry>
<term>Typical use:</term>
<listitem>
<para>
- Redirect requests to other sites.
+ Send custom cookies or feed log analysis scripts with even more useless data.
</para>
</listitem>
</varlistentry>
<term>Effect:</term>
<listitem>
<para>
- Convinces the browser that the requested document has been moved
- to another location and the browser should get it from there.
+ Sends a custom, user-defined cookie with each request.
</para>
</listitem>
</varlistentry>
<term>Type:</term>
<!-- Boolean, Parameterized, Multi-value -->
<listitem>
- <para>Parameterized</para>
+ <para>Multi-value.</para>
</listitem>
</varlistentry>
<term>Parameter:</term>
<listitem>
<para>
- Any URL.
+ A string of the form <quote><replaceable class="option">name</replaceable>=<replaceable
+ class="parameter">value</replaceable></quote>.
</para>
</listitem>
</varlistentry>
<term>Notes:</term>
<listitem>
<para>
- This action is useful to replace whole documents with your own
- ones. For that to work, they have to be available on another server,
- and both should resolve.
- </para>
- <para>
- You can do the same by combining the actions
- <literal><link linkend="block">block</link></literal>,
- <literal><link linkend="handle-as-image">handle-as-image</link></literal> and
- <literal><link linkend="set-image-blocker">set-image-blocker{URL}</link></literal>.
- It doesn't sound right for non-image documents, and that's why this action
- was created.
+ Being multi-valued, multiple instances of this action can apply to the same request,
+ resulting in multiple cookies being sent.
</para>
<para>
- This action will be ignored if you use it together with
- <literal><link linkend="block">block</link></literal>.
+ This action is rarely used and not enabled in the default configuration.
</para>
</listitem>
</varlistentry>
-
<varlistentry>
- <term>Example usage:</term>
+ <term>Example usage (section):</term>
<listitem>
<para>
- <screen># Replace example.com's style sheet with another one
-{+redirect{http://localhost/css-replacements/example.com.css}}
-example.com/stylesheet.css</screen>
+ <screen>{+send-wafer{UsingPrivoxy=true}}
+my-internal-testing-server.void</screen>
</para>
</listitem>
</varlistentry>
-
</variablelist>
</sect3>
<!-- ~~~~~ New section ~~~~~ -->
-<sect3 renderas="sect4" id="send-vanilla-wafer">
-<title>send-vanilla-wafer</title>
+<sect3 renderas="sect4" id="server-header-filter">
+<title>server-header-filter</title>
<variablelist>
<varlistentry>
<term>Typical use:</term>
<listitem>
<para>
- Feed log analysis scripts with useless data.
+ Rewrite or remove single server headers.
</para>
</listitem>
</varlistentry>
<term>Effect:</term>
<listitem>
<para>
- Sends a cookie with each request stating that you do not accept any copyright
- on cookies sent to you, and asking the site operator not to track you.
+ All server headers to which this action applies are filtered on-the-fly
+ through the specified regular expression based substitutions.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>Type:</term>
- <!-- Boolean, Parameterized, Multi-value -->
+ <!-- boolean, parameterized, Multi-value -->
<listitem>
- <para>Boolean.</para>
+ <para>Parameterized.</para>
</listitem>
</varlistentry>
<term>Parameter:</term>
<listitem>
<para>
- N/A
+ The name of a server-header filter, as defined in one of the
+ <link linkend="filter-file">filter files</link>.
</para>
</listitem>
</varlistentry>
<term>Notes:</term>
<listitem>
<para>
- The vanilla wafer is a (relatively) unique header and could conceivably be used to track you.
+ Server-header filters are applied to each header on its own, not to
+ all at once. This makes it easier to diagnose problems, but on the downside
+ you can't write filters that only change header x if header y's value is z.
+ You can do that by using tags though.
</para>
<para>
- This action is rarely used and not enabled in the default configuration.
+ Server-header filters are executed after the other header actions have finished
+ and use their output as input.
+ </para>
+ <para>
+ Please refer to the <link linkend="filter-file">filter file chapter</link>
+ to learn which server-header filters are available by default, and how to
+ create your own.
</para>
- </listitem>
</varlistentry>
<varlistentry>
- <term>Example usage:</term>
+ <term>Example usage (section):</term>
<listitem>
- <para>
- <screen>+send-vanilla-wafer</screen>
- </para>
+ <para>
+ <screen>
+{+server-header-filter{html-to-xml}}
+example.org/xml-instance-that-is-delivered-as-html
+
+{+server-header-filter{xml-to-html}}
+example.org/instance-that-is-delivered-as-xml-but-is-not
+ </screen>
+ </para>
</listitem>
</varlistentry>
<!-- ~~~~~ New section ~~~~~ -->
-<sect3 renderas="sect4" id="send-wafer">
-<title>send-wafer</title>
+<sect3 renderas="sect4" id="server-header-tagger">
+<title>server-header-tagger</title>
<variablelist>
<varlistentry>
<term>Typical use:</term>
<listitem>
<para>
- Send custom cookies or feed log analysis scripts with even more useless data.
+ Disable or disable filters based on the Content-Type header.
</para>
</listitem>
</varlistentry>
<term>Effect:</term>
<listitem>
<para>
- Sends a custom, user-defined cookie with each request.
+ Server headers to which this action applies are filtered on-the-fly through
+ the specified regular expression based substitutions, the result is used as
+ tag.
</para>
</listitem>
</varlistentry>
<varlistentry>
<term>Type:</term>
- <!-- Boolean, Parameterized, Multi-value -->
+ <!-- boolean, parameterized, Multi-value -->
<listitem>
- <para>Multi-value.</para>
+ <para>Parameterized.</para>
</listitem>
</varlistentry>
<term>Parameter:</term>
<listitem>
<para>
- A string of the form <quote><replaceable class="option">name</replaceable>=<replaceable
- class="parameter">value</replaceable></quote>.
+ The name of a server-header tagger, as defined in one of the
+ <link linkend="filter-file">filter files</link>.
</para>
</listitem>
</varlistentry>
<term>Notes:</term>
<listitem>
<para>
- Being multi-valued, multiple instances of this action can apply to the same request,
- resulting in multiple cookies being sent.
+ Server-header taggers are applied to each header on its own,
+ and as the header isn't modified, each tagger <quote>sees</quote>
+ the original.
</para>
<para>
- This action is rarely used and not enabled in the default configuration.
+ Server-header taggers are executed before all other header actions
+ that modify server headers. Their tags can be used to control
+ all of the other server-header actions, the content filters
+ and the crunch actions (<link linkend="redirect">redirect</link>
+ and <link linkend="block">block</link>).
</para>
- </listitem>
+ <para>
+ Obviously crunching based on tags created by server-header taggers
+ doesn't prevent the request from showing up in the server's log file.
+ </para>
+
</varlistentry>
+
<varlistentry>
<term>Example usage (section):</term>
<listitem>
- <para>
- <screen>{+send-wafer{UsingPrivoxy=true}}
-my-internal-testing-server.void</screen>
- </para>
+ <para>
+ <screen>
+# Tag every request with the declared content type
+{+client-header-filter{content-type}}
+/
+ </screen>
+ </para>
</listitem>
</varlistentry>
+
</variablelist>
</sect3>
<screen>+set-image-blocker{pattern}</screen>
</para>
<para>
- Redirect to the BSD devil:
+ Redirect to the BSD daemon:
</para>
<para>
<screen>+set-image-blocker{http://www.freebsd.org/gifs/dae_up3.gif}</screen>
For <quote>Connect</quote> requests the clients tell
<application>Privoxy</application> which host they are interested
in, but not which document they plan to get later. As a result, the
- <quote>Go there anyway</quote> link becomes rather useless:
- it lets the client request the home page of the forbidden host
- through unencrypted HTTP, still using the port of the last request.
- </para>
- <para>
- If you previously configured <application>Privoxy</application> to do the
- request through a SSL tunnel, everything will work. Most likely you haven't
- and the server will respond with an error message because it is expecting
- HTTPS (SSL).
+ <quote>Go there anyway</quote> wouldn't work and is therefore suppressed.
</para>
</listitem>
</varlistentry>
them before writing. So the effects of your aliases are of course preserved,
but the aliases themselves are lost when you edit sections that use aliases
with it.
- This is likely to change in future versions of <application>Privoxy</application>.
</para>
<para>
#
+crunch-all-cookies = +<link linkend="CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies</link> +<link linkend="CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</link>
-crunch-all-cookies = -<link linkend="CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies</link> -<link linkend="CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</link>
- block-as-image = +block +handle-as-image
- mercy-for-cookies = -crunch-all-cookies -<link linkend="SESSION-COOKIES-ONLY">session-cookies-only</link> -<link linkend="FILTER-CONTENT-COOKIES">filter{content-cookies}</link>
+ +block-as-image = +block +handle-as-image
+ allow-all-cookies = -crunch-all-cookies -<link linkend="SESSION-COOKIES-ONLY">session-cookies-only</link> -<link linkend="FILTER-CONTENT-COOKIES">filter{content-cookies}</link>
# These aliases define combinations of actions
# that are useful for certain types of sites:
#
- fragile = -<link linkend="BLOCK">block</link> -<link linkend="FILTER">filter</link> -crunch-all-cookies -<link linkend="FAST-REDIRECTS">fast-redirects</link> -<link linkend="HIDE-REFERER">hide-referrer</link> -<link linkend="KILL-POPUPS">kill-popups</link>
+ fragile = -<link linkend="BLOCK">block</link> -<link linkend="FILTER">filter</link> -crunch-all-cookies -<link linkend="FAST-REDIRECTS">fast-redirects</link> -<link linkend="HIDE-REFERER">hide-referrer</link> -<link linkend="KILL-POPUPS">kill-popups</link> -<link linkend="PREVENT-COMPRESSION">prevent-compression</link>
+
shop = -crunch-all-cookies -<link linkend="FILTER-ALL-POPUPS">filter{all-popups}</link> -<link linkend="KILL-POPUPS">kill-popups</link>
# Short names for other aliases, for really lazy people ;-)
{fragile}
.office.microsoft.com
.windowsupdate.microsoft.com
- .nytimes.com
+ # Gmail is really mail.google.com, not gmail.com
+ mail.google.com
# Shopping sites:
# Allow cookies (for setting and retrieving your customer data)
{shop}
.quietpc.com
.worldpay.com # for quietpc.com
- .scan.co.uk
+ mybank.example.com
# These shops require pop-ups:
#
- {shop -kill-popups -filter{all-popups}}
+ {-kill-popups -filter{all-popups} -filter{unsolicited-popups}}
.dabs.com
.overclockers.co.uk</screen>
</para>
<para>
- Aliases like <quote>shop</quote> and <quote>fragile</quote> are often used for
- <quote>problem</quote> sites that require some actions to be disabled
+ Aliases like <quote>shop</quote> and <quote>fragile</quote> are typically used for
+ <quote>problem</quote> sites that require more than one action to be disabled
in order to function properly.
</para>
</sect2>
#
+crunch-all-cookies = +<link linkend="CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies</link> +<link linkend="CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</link>
-crunch-all-cookies = -<link linkend="CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies</link> -<link linkend="CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</link>
- block-as-image = +block +handle-as-image
+ +block-as-image = +block +handle-as-image
mercy-for-cookies = -crunch-all-cookies -<link linkend="SESSION-COOKIES-ONLY">session-cookies-only</link> -<link linkend="FILTER-CONTENT-COOKIES">filter{content-cookies}</link>
# These aliases define combinations of actions
##########################################################################
{ \
-<link linkend="ADD-HEADER">add-header</link> \
+ -<link linkend="CLIENT-HEADER-FILTER">client-header-filter{hide-tor-exit-notation}</link> \
-<link linkend="BLOCK">block</link> \
-<link linkend="CONTENT-TYPE-OVERWRITE">content-type-overwrite</link> \
-<link linkend="CRUNCH-CLIENT-HEADER">crunch-client-header</link> \
-<link linkend="CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</link> \
+<link linkend="DEANIMATE-GIFS">deanimate-gifs</link> \
-<link linkend="DOWNGRADE-HTTP-VERSION">downgrade-http-version</link> \
- +<link linkend="FAST-REDIRECTS">fast-redirects{check-decoded-url}</link> \
- +<link linkend="FILTER-JS-ANNOYANCES">filter{js-annoyances}</link> \
+ -<link linkend="FAST-REDIRECTS">fast-redirects{check-decoded-url}</link> \
+ -<link linkend="FILTER-JS-ANNOYANCES">filter{js-annoyances}</link> \
-<link linkend="FILTER-JS-EVENTS">filter{js-events}</link> \
+<link linkend="FILTER-HTML-ANNOYANCES">filter{html-annoyances}</link> \
-<link linkend="FILTER-CONTENT-COOKIES">filter{content-cookies}</link> \
+<link linkend="FILTER-REFRESH-TAGS">filter{refresh-tags}</link> \
- +<link linkend="FILTER-UNSOLICITED-POPUPS">filter{unsolicited-popups}</link> \
+ -<link linkend="FILTER-UNSOLICITED-POPUPS">filter{unsolicited-popups}</link> \
-<link linkend="FILTER-ALL-POPUPS">filter{all-popups}</link> \
- +<link linkend="FILTER-IMG-REORDER">filter{img-reorder}</link> \
- +<link linkend="FILTER-BANNERS-BY-SIZE">filter{banners-by-size}</link> \
+ -<link linkend="FILTER-IMG-REORDER">filter{img-reorder}</link> \
+ -<link linkend="FILTER-BANNERS-BY-SIZE">filter{banners-by-size}</link> \
-<link linkend="FILTER-BANNERS-BY-LINK">filter{banners-by-link}</link> \
+<link linkend="FILTER-WEBBUGS">filter{webbugs}</link> \
-<link linkend="FILTER-TINY-TEXTFORMS">filter{tiny-textforms}</link> \
- +<link linkend="FILTER-JUMPING-WINDOWS">filter{jumping-windows}</link> \
+ -<link linkend="FILTER-JUMPING-WINDOWS">filter{jumping-windows}</link> \
-<link linkend="FILTER-FRAMESET-BORDERS">filter{frameset-borders}</link> \
-<link linkend="FILTER-DEMORONIZER">filter{demoronizer}</link> \
-<link linkend="FILTER-SHOCKWAVE-FLASH">filter{shockwave-flash}</link> \
-<link linkend="FILTER-FUN">filter{fun}</link> \
-<link linkend="FILTER-CRUDE-PARENTAL">filter{crude-parental}</link> \
+<link linkend="FILTER-IE-EXPLOITS">filter{ie-exploits}</link> \
- -<link linkend="FILTER-CLIENT-HEADERS">filter-client-headers</link> \
- -<link linkend="FILTER-SERVER-HEADERS">filter-server-headers</link> \
+ -<link linkend="FILTER-GOOGLE">filter{google}</link> \
+ -<link linkend="FILTER-YAHOO">filter{yahoo}</link> \
+ -<link linkend="FILTER-MSN">filter{msn}</link> \
+ -<link linkend="FILTER-BLOGSPOT">filter{blogspot}</link> \
+ -<link linkend="FILTER-NO-PING">filter{no-ping}</link> \
-<link linkend="FORCE-TEXT-MODE">force-text-mode</link> \
-<link linkend="HANDLE-AS-EMPTY-DOCUMENT">handle-as-empty-document</link> \
-<link linkend="HANDLE-AS-IMAGE">handle-as-image</link> \
-<link linkend="REDIRECT">redirect</link> \
-<link linkend="SEND-VANILLA-WAFER">send-vanilla-wafer</link> \
-<link linkend="SEND-WAFER">send-wafer</link> \
+ -<link linkend="SERVER-HEADER-FILTER">server-header-filter{xml-to-html}</link> \
+ -<link linkend="SERVER-HEADER-FILTER">server-header-filter{html-to-xml}</link> \
+<link linkend="SESSION-COOKIES-ONLY">session-cookies-only</link> \
+<link linkend="SET-IMAGE-BLOCKER">set-image-blocker{pattern}</link> \
-<link linkend="TREAT-FORBIDDEN-CONNECTS-LIKE-BLOCKS">treat-forbidden-connects-like-blocks</link> \
#
{ fragile }
.office.microsoft.com # surprise, surprise!
-.windowsupdate.microsoft.com</screen>
+.windowsupdate.microsoft.com
+mail.google.com</screen>
</para>
<para>
generate the banners, so it won't be visible from the URL that the
request is for an image. Hence we block them <emphasis>and</emphasis>
mark them as images in one go, with the help of our
- <literal>block-as-image</literal> alias defined above. (We could of
+ <literal>+block-as-image</literal> alias defined above. (We could of
course just as well use <literal>+<link linkend="block">block</link>
+<link linkend="handle-as-image">handle-as-image</link></literal> here.)
Remember that the type of the replacement image is chosen by the
<screen>
# Known ad generators:
#
-{ block-as-image }
+{ +block-as-image }
ar.atwola.com
.ad.doubleclick.net
.ad.*.doubleclick.net
.a.yimg.com/(?:(?!/i/).)*$
.a[0-9].yimg.com/(?:(?!/i/).)*$
bs*.gsanet.com
-bs*.einets.com
.qkimg.net</screen>
</para>
<para>
One of the most important jobs of <application>Privoxy</application>
- is to block banners. A huge bunch of them can be <quote>blocked</quote>
+ is to block banners. Many of these can be <quote>blocked</quote>
by the <literal><link linkend="filter">filter</link>{banners-by-size}</literal>
action, which we enabled above, and which deletes the references to banner
images from the pages while they are loaded, so the browser doesn't request
<literal><link linkend="block">block</link></literal> action to them.
</para>
<para>
- First comes a bunch of generic patterns, which do most of the work, by
+ First comes many generic patterns, which do most of the work, by
matching typical domain and path name components of banners. Then comes
a list of individual patterns for specific sites, which is omitted here
to keep the example short:
</para>
<para>
- You wouldn't believe how many advertisers actually call their banner
+ It's quite remarkable how many advertisers actually call their banner
servers ads.<replaceable>company</replaceable>.com, or call the directory
in which the banners are stored simply <quote>banners</quote>. So the above
generic patterns are surprisingly effective.
{ -<link linkend="BLOCK">block</link> }
adv[io]*. # (for advogato.org and advice.*)
adsl. # (has nothing to do with ads)
+adobe. # (has nothing to do with ads either)
ad[ud]*. # (adult.* and add.*)
.edu # (universities don't host banners (yet!))
.*loads. # (downloads, uploads etc)
# Don't filter code!
#
{ -<link linkend="FILTER">filter</link> }
-/.*cvs
+/(.*/)?cvs
+bugzilla.
+developer.
+wiki.
.sourceforge.net</screen>
</para>
<para>
<screen>
{ allow-all-cookies }
-sourceforge.net
-sunsolve.sun.com
-.slashdot.org
-.yahoo.com
-.msdn.microsoft.com
-.redhat.com</screen>
+ sourceforge.net
+ .yahoo.com
+ .msdn.microsoft.com
+ .redhat.com</screen>
</para>
<para>
<para>
<screen>
{ -<link linkend="FILTER">filter</link> }
-.your-home-banking-site.com</screen>
+ .your-home-banking-site.com</screen>
</para>
<para>
<para>
<screen>
{ +<link linkend="BLOCK">block</link> }
-www.example.com/nasty-ads/sponsor.gif
-another.popular.site.net/more/junk/here/</screen>
+ www.example.com/nasty-ads/sponsor\.gif
+ another.popular.site.net/more/junk/here/</screen>
</para>
<para>
<para>
<screen>
{ +block-as-image }
-.doubleclick.net
-/Realmedia/ads/
-ar.atwola.com/</screen>
+ .doubleclick.net
+ .fastclick.net
+ /Realmedia/ads/
+ ar.atwola.com/</screen>
</para>
<para>
-- <emphasis>whoa!</emphasis> -- it worked. The <literal>fragile</literal>
aliases disables those actions that are most likely to break a site. Also,
good for testing purposes to see if it is <application>Privoxy</application>
- that is causing the problem or not.
+ that is causing the problem or not. We later find other regular sites
+ that misbehave, and add those to our personalized list of troublemakers:
</para>
<para>
<screen>
{ fragile }
-.forbes.com</screen>
+ .forbes.com
+ webmail.example.com
+ .mybank.com</screen>
</para>
<para>
<para>
<screen>
{ +<link linkend="filter-fun">filter{fun}</link> }
-/ # For ALL sites!</screen>
+ / # For ALL sites!</screen>
</para>
<para>
<para>
<screen>
{ allow-ads }
-.sourceforge.net
-.slashdot.org
-.osdn.net</screen>
+ .sourceforge.net
+ .slashdot.org
+ .osdn.net</screen>
</para>
<para>
<para>
<screen>
{ handle-as-text }
-/.*\.sh$</screen>
+ /.*\.sh$</screen>
</para>
<para>
<title>Filter Files</title>
<para>
- On-the-fly text substitutions that can be invoked through the
- <literal><link linkend="filter">filter</link></literal> action need
+ On-the-fly text substitutions need
to be defined in a <quote>filter file</quote>. Once defined, they
- can then be invoked as an <quote>action</quote>. Multiple filter files can be
- defined through the <literal> <link
+ can then be invoked as an <quote>action</quote>.
+</para>
+
+<para>
+ &my-app; supports three different filter actions:
+ <literal><link linkend="filter">filter</link></literal> to
+ rewrite the content that is send to the client,
+ <literal><link linkend="client-header-filter">client-header-filter</link></literal>
+ to rewrite headers that are send by the client, and
+ <literal><link linkend="server-header-filter">server-header-filter</link></literal>
+ to rewrite headers that are send by the server, and
+</para>
+
+<para>
+ &my-app; also supports two tagger actions:
+ <literal><link linkend="client-header-tagger">client-header-tagger</link></literal>
+ and
+ <literal><link linkend="server-header-tagger">server-header-tagger</link></literal>.
+ Taggers and filters use the same syntax in the filter files, the differnce
+ is that taggers don't modify the text they are filtering, but use a rewritten
+ version of the filtered text as tag. The tags can then be used to change the
+ applying actions through sections with <link linkend="tag-pattern">tag-patterns</link>.
+</para>
+
+
+<para>
+ Multiple filter files can be defined through the <literal> <link
linkend="filterfile">filterfile</link></literal> config directive. The filters
as supplied by the developers will be found in
<filename>default.filter</filename>. It is recommended that any locally
</para>
<para>
- Typical reasons for doing these kinds of substitutions are to eliminate
- common annoyances in HTML and JavaScript, such as pop-up windows,
+ Command tasks for content filters are to eliminate common annoyances in
+ HTML and JavaScript, such as pop-up windows,
exit consoles, crippled windows without navigation tools, the
infamous <BLINK> tag etc, to suppress images with certain
width and height attributes (standard banner sizes or web-bugs),
- or just to have fun. The possibilities are endless.
+ or just to have fun.
</para>
<para>
- Filtering works on any text-based document type, including
+ Content filtering works on any text-based document type, including
HTML, JavaScript, CSS etc. (all <literal>text/*</literal>
MIME types, <emphasis>except</emphasis> <literal>text/plain</literal>).
Substitutions are made at the source level, so if you want to <quote>roll
your own</quote> filters, you should first be familiar with HTML syntax,
- and, of course, regular expressions. By default, filters are only applied
- to the document content, but can be extended to the headers with
- the supplemental actions:
- <link linkend="filter-client-headers">filter-client-headers</link> and
- <link linkend="filter-server-headers">filter-server-headers</link>.
+ and, of course, regular expressions.
</para>
<para>
Just like the <link linkend="actions-file">actions files</link>, the
filter file is organized in sections, which are called <emphasis>filters</emphasis>
- here. Each filter consists of a heading line, that starts with the
- <emphasis>keyword</emphasis> <literal>FILTER:</literal>, followed by
- the filter's <emphasis>name</emphasis>, and a short (one line)
+ here. Each filter consists of a heading line, that starts with one of the
+ <emphasis>keywords</emphasis> <literal>FILTER:</literal>,
+ <literal>CLIENT-HEADER-FILTER:</literal> or <literal>SERVER-HEADER-FILTER:</literal>
+ followed by the filter's <emphasis>name</emphasis>, and a short (one line)
<emphasis>description</emphasis> of what it does. Below that line
come the <emphasis>jobs</emphasis>, i.e. lines that define the actual
text substitutions. By convention, the name of a filter
</para>
<para>
- A filter header line for a filter called <quote>foo</quote> could look
+ Filter definitions start with a header line that contains the filter
+ type, the filter name and the filter description.
+ A content filter header line for a filter called <quote>foo</quote> could look
like this:
</para>
</para>
<para>
- If you are new to regular expressions, you might want to take a look at
+ If you are new to
+ <ulink url="http://en.wikipedia.org/wiki/Regular_expressions"><quote>Regular
+ Expressions</quote></ulink>, you might want to take a look at
the <link linkend="regex">Appendix on regular expressions</link>, and
see the <ulink url="http://perldoc.perl.org/perlre.html">Perl
manual</ulink> for
<sect2><title>Filter File Tutorial</title>
<para>
- Now, let's complete our <quote>foo</quote> filter. We have already defined
+ Now, let's complete our <quote>foo</quote> content filter. We have already defined
the heading, but the jobs are still missing. Since all it does is to replace
<quote>foo</quote> with <quote>bar</quote>, there is only one (trivial) job
needed:
</listitem>
</itemizedlist>
</para>
+ <para>
+ Use with caution. This is an aggressive filter, and can break sites that
+ rely heavily on JavaScript.
+ </para>
</listitem>
</varlistentry>
<para>
This is a very radical measure. It removes virtually all JavaScript event bindings, which
means that scripts can not react to user actions such as mouse movements or clicks, window
- resizing etc, anymore.
+ resizing etc, anymore. Use with caution!
</para>
<para>
We <emphasis>strongly discourage</emphasis> using this filter as a default since it breaks
to sneak cookies to the browser on the content level.
</para>
<para>
- This filter disables HTML and JavaScript code that reads or sets cookies. Use
- it wherever you would also use the cookie crunch actions.
+ This filter disables most HTML and JavaScript code that reads or sets
+ cookies. It cannot detect all clever uses of these types of code, so it
+ should not be relied on as an absolute fix. Use it wherever you would also
+ use the cookie crunch actions.
</para>
</listitem>
</varlistentry>
</para>
<para>
Technical note: The filter works by redefining the window.open JavaScript
- function to a dummy function during the loading and rendering phase of each
- HTML page access, and restoring the function afterward.
+ function to a dummy function, <literal>PrivoxyWindowOpen()</literal>,
+ during the loading and rendering phase of each HTML page access, and
+ restoring the function afterward.
+ </para>
+ <para>
+ This is recommended only for browsers that cannot perform this function
+ reliably themselves. And be aware that some sites require such windows
+ in order to function normally. Use with caution.
</para>
</listitem>
</varlistentry>
<listitem>
<para>
Attempt to prevent <emphasis>all</emphasis> pop-up windows from opening.
- Note this should be used with more discretion than the above, since it is
- more likely to break some sites that require pop-ups for normal usage. Use
- with caution.
+ Note this should be used with even more discretion than the above, since
+ it is more likely to break some sites that require pop-ups for normal
+ usage. Use with caution.
</para>
</listitem>
</varlistentry>
Occasionally this filter will cause false positives on images that are not ads,
but just happen to be of one of the standard banner sizes.
</para>
+ <para>
+ Recommended only for those who require extreme ad blocking. The default
+ block rules should catch 95+% of all ads <emphasis>without</emphasis> this filter enabled.
+ </para>
</listitem>
</varlistentry>
As an HTML page is loaded by the browser, an embedded image tag causes the
browser to contact a third-party site, disclosing the tracking information
through the requested URL and/or cookies for that third-party domain, without
- the use ever becoming aware of the interaction with the third-party site.
+ the user ever becoming aware of the interaction with the third-party site.
HTML-ized spam also uses a similar technique to verify email addresses.
</para>
<para>
<para>
Many consider windows that move, or resize themselves to be abusive. This filter
neutralizes the related JavaScript code. Note that some sites might not display
- or behave as intended when using this filter.
+ or behave as intended when using this filter. Use with caution.
</para>
</listitem>
</varlistentry>
<term><emphasis>ie-exploits</emphasis></term>
<listitem>
<para>
- A collection of text replacements to disable malicious HTML and JavaScript
+ An experimental collection of text replacements to disable malicious HTML and JavaScript
code that exploits known security holes in Internet Explorer.
</para>
<para>
</listitem>
</varlistentry>
+ <varlistentry>
+ <term><emphasis>google</emphasis></term>
+ <listitem>
+ <para>
+ A CSS based block for Google text ads. Also removes a width limitation
+ and the toolbar advertisement.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><emphasis>yahoo</emphasis></term>
+ <listitem>
+ <para>
+ Another CSS based block, this time for Yahoo text ads. And removes
+ a width limitation as well.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><emphasis>msn</emphasis></term>
+ <listitem>
+ <para>
+ Another CSS based block, this time for MSN text ads. And removes
+ tracking URLs, as well as a width limitation.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><emphasis>blogspot</emphasis></term>
+ <listitem>
+ <para>
+ Cleans up some Blogspot blogs. Read the fine print before using this one!
+ </para>
+ <para>
+ This filter also intentionally removes some navigation stuff and sets the
+ page width to 100%. As a result, some rounded <quote>corners</quote> would
+ appear to early or not at all and as fixing this would require a browser
+ that understands background-size (CSS3), they are removed instead.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><emphasis>xml-to-html</emphasis></term>
+ <listitem>
+ <para>
+ Server-header filter to change the Content-Type from xml to html.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><emphasis>html-to-xml</emphasis></term>
+ <listitem>
+ <para>
+ Server-header filter to change the Content-Type from html to xml.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><emphasis>no-ping</emphasis></term>
+ <listitem>
+ <para>
+ Removes the non-standard <literal>ping</literal> attribute from
+ anchor and area HTML tags.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><emphasis>hide-tor-exit-notation</emphasis></term>
+ <listitem>
+ <para>
+ Client-header filter to remove the <command>Tor</command> exit node notation
+ found in Host and Referer headers.
+ </para>
+ <para>
+ If &my-app; and <command>Tor</command> are chained and &my-app;
+ is configured to use socks4a, one can use <quote>http://www.example.org.foobar.exit/</quote>
+ to access the host <quote>www.example.org</quote> through the
+ <command>Tor</command> exit node <quote>foobar</quote>.
+ </para>
+ <para>
+ As the HTTP client isn't aware of this notation, it treats the
+ whole string <quote>www.example.org.foobar.exit</quote> as host and uses it
+ for the <quote>Host</quote> and <quote>Referer</quote> headers. From the
+ server's point of view the resulting headers are invalid and can cause problems.
+ </para>
+ <para>
+ An invalid <quote>Referer</quote> header can trigger <quote>hot-linking</quote>
+ protections, an invalid <quote>Host</quote> header will make it impossible for
+ the server to find the right vhost (several domains hosted on the same IP address).
+ </para>
+ <para>
+ This client-header filter removes the <quote>foo.exit</quote> part in those headers
+ to prevent the mentioned problems. Note that it only modifies
+ the HTTP headers, it doesn't make it impossible for the server
+ to detect your <command>Tor</command> exit node based on the IP address
+ the request is coming from.
+ </para>
+ </listitem>
+ </varlistentry>
+
<!--
<varlistentry>
<term><emphasis> </emphasis></term>
<!-- ~~~~~ New section ~~~~~ -->
<sect1 id="templates">
-<title>Templates</title>
+<title>Privoxy's Template Files</title>
<para>
All <application>Privoxy</application> built-in pages, i.e. error pages such as the
<ulink url="http://show-the-404-error.page"><quote>404 - No Such Domain</quote>
<sect2 id="chain">
<title>Chain of Events</title>
<para>
- Let's take a quick look at the basic sequence of events when a web page is
- requested by your browser and <application>Privoxy</application> is on duty:
+ Let's take a quick look at how some of <application>Privoxy's</application>
+ core features are triggered, and the ensuing sequence of events when a web
+ page is requested by your browser:
</para>
<para>
linkend="BLOCK"><quote>+block</quote></link> patterns. If
so, the URL is then blocked, and the remote web server will not be contacted.
<link linkend="HANDLE-AS-IMAGE"><quote>+handle-as-image</quote></link>
- is then checked and if it does not match, an
- HTML <quote>BLOCKED</quote> page is sent back. Otherwise, if it does match,
- an image is returned. The type of image depends on the setting of <link
- linkend="SET-IMAGE-BLOCKER"><quote>+set-image-blocker</quote></link>
+ and
+ <link linkend="HANDLE-AS-EMPTY-DOCUMENT"><quote>+handle-as-empty-document</quote></link>
+ are then checked, and if there is no match, an
+ HTML <quote>BLOCKED</quote> page is sent back to the browser. Otherwise, if
+ it does match, an image is returned for the former, and an empty text
+ document for the latter. The type of image would depend on the setting of
+ <link linkend="SET-IMAGE-BLOCKER"><quote>+set-image-blocker</quote></link>
(blank, checkerboard pattern, or an HTTP redirect to an image elsewhere).
</para>
</listitem>
</listitem>
<listitem>
<para>
- Now the web server starts sending its response back (i.e. typically a web page and related
- data).
+ Now the web server starts sending its response back (i.e. typically a web
+ page).
</para>
</listitem>
<listitem>
</listitem>
<listitem>
<para>
- If a <link linkend="FILTER"><quote>+filter</quote></link>
+ If any <link linkend="FILTER"><quote>+filter</quote></link> action
or <link
linkend="DEANIMATE-GIFS"><quote>+deanimate-gifs</quote></link>
action applies (and the document type fits the action), the rest of the page is
<application>Privoxy</application> back to your browser.
</para>
<para>
- If neither <link linkend="FILTER"><quote>+filter</quote></link>
+ If neither a <link linkend="FILTER"><quote>+filter</quote></link> action
or <link
linkend="DEANIMATE-GIFS"><quote>+deanimate-gifs</quote></link>
matches, then <application>Privoxy</application> passes the raw data through
As the browser receives the now (possibly filtered) page content, it
reads and then requests any URLs that may be embedded within the page
source, e.g. ad images, stylesheets, JavaScript, other HTML documents (e.g.
- frames), sounds, etc. For each of these objects, the browser issues a new
- request. And each such request is in turn processed as above. Note that a
- complex web page may have many such embedded URLs.
+ frames), sounds, etc. For each of these objects, the browser issues a
+ separate request (this is easily viewable in <application>Privoxy's</application>
+ logs). And each such request is in turn processed just as above. Note that a
+ complex web page will have many, many such embedded URLs. If these
+ secondary requests are to a different server, then quite possibly a very
+ differing set of actions is triggered.
</para>
</listitem>
</itemizedlist>
</para>
+<para>
+ NOTE: This is somewhat of a simplistic overview of what happens with each URL
+ request. For the sake of brevity and simplicity, we have focused on
+ <application>Privoxy's</application> core features only.
+</para>
</sect2>
<!-- ~~~~~ New section ~~~~~ -->
<sect2 id="actionsanat">
-<title>Anatomy of an Action</title>
+<title>Troubleshooting: Anatomy of an Action</title>
<para>
The way <application>Privoxy</application> applies
and easy way to do this (be sure to flush caches afterward!). Looking at the
logs is a good idea too.
</para>
+<para>
+ Another easy troubleshooting step to try is if you have done any
+ customization of your installation, revert back to the installed
+ defaults and see if that helps. There are times the developers get complaints
+ about one thing or another, and the problem is more related to a customized
+ configuration issue.
+</para>
<para>
<application>Privoxy</application> also provides the
{-add-header
-block
+ -client-header-filter{hide-tor-exit-notation}
-content-type-overwrite
-crunch-client-header
-crunch-if-none-match
-filter {fun}
-filter {crude-parental}
-filter {site-specifics}
- +filter {js-annoyances}
- +filter {html-annoyances}
+ -filter {js-annoyances}
+ -filter {html-annoyances}
+filter {refresh-tags}
- +filter {unsolicited-popups}
+ -filter {unsolicited-popups}
+filter {img-reorder}
+filter {banners-by-size}
+filter {webbugs}
+filter {jumping-windows}
+filter {ie-exploits}
- -filter-client-headers
- -filter-server-headers
+ -filter {google}
+ -filter {yahoo}
+ -filter {msn}
+ -filter {blogspot}
+ -filter {no-ping}
-force-text-mode
-handle-as-empty-document
-handle-as-image
-redirect
-send-vanilla-wafer
-send-wafer
+ -server-header-filter{xml-to-html}
+ -server-header-filter{html-to-xml}
+session-cookies-only
+set-image-blocker {pattern}
-treat-forbidden-connects-like-blocks }
</para>
<para>
The first listing
- is any matches for the <filename>standard.action</filename> file. No hits at
- all here on <quote>standard</quote>. Then next is <quote>default</quote>, or
- our <filename>default.action</filename> file. The large, multi-line listing,
- is how the actions are set to match for all URLs, i.e. our default settings.
- If you look at your <quote>actions</quote> file, this would be the section
- just below the <quote>aliases</quote> section near the top. This will apply to
- all URLs as signified by the single forward slash at the end of the listing
- -- <quote>/</quote>.
-</para>
-
-<para>
- But we can define additional actions that would be exceptions to these general
- rules, and then list specific URLs (or patterns) that these exceptions would
- apply to. Last match wins. Just below this then are two explicit matches for
- <quote>.google.com</quote>. The first is negating our previous cookie setting,
- which was for <link
+ is for our <filename>default.action</filename> file. The large, multi-line
+ listing, is how the actions are set to match for all URLs, i.e. our default
+ settings. If you look at your <quote>actions</quote> file, this would be the
+ section just below the <quote>aliases</quote> section near the top. This
+ will apply to all URLs as signified by the single forward slash at the end
+ of the listing -- <quote> / </quote>.
+</para>
+
+<para>
+ But we have defined additional actions that would be exceptions to these general
+ rules, and then we list specific URLs (or patterns) that these exceptions
+ would apply to. Last match wins. Just below this then are two explicit
+ matches for <quote>.google.com</quote>. The first is negating our previous
+ cookie setting, which was for <link
linkend="SESSION-COOKIES-ONLY"><quote>+session-cookies-only</quote></link>
(i.e. not persistent). So we will allow persistent cookies for google, at
least that is how it is in this example. The second turns
- <emphasis>off</emphasis> any
- <link
+ <emphasis>off</emphasis> any <link
linkend="FAST-REDIRECTS"><quote>+fast-redirects</quote></link>
action, allowing this to take place unmolested. Note that there is a leading
dot here -- <quote>.google.com</quote>. This will match any hosts and
sub-domains, in the google.com domain also, such as
- <quote>www.google.com</quote>. So, apparently, we have these two actions
- defined somewhere in the lower part of our <filename>default.action</filename>
- file, and <quote>google.com</quote> is referenced somewhere in these latter
- sections.
+ <quote>www.google.com</quote> or <quote>mail.google.com</quote>. But it would not
+ match <quote>www.google.de</quote>! So, apparently, we have these two actions
+ defined as exceptions to the general rules at the top somewhere in the lower
+ part of our <filename>default.action</filename> file, and
+ <quote>google.com</quote> is referenced somewhere in these latter sections.
</para>
<para>
Then, for our <filename>user.action</filename> file, we again have no hits.
So there is nothing google-specific that we might have added to our own, local
- configuration.
+ configuration. If there was, those actions would over-rule any actions from
+ previously processed files, such as <filename>default.action</filename>.
+ <filename>user.action</filename> typically has the last word. This is the
+ best place to put hard and fast exceptions,
</para>
<para>
-add-header
-block
+ -client-header-filter{hide-tor-exit-notation}
-content-type-overwrite
-crunch-client-header
-crunch-if-none-match
-crunch-server-header
+deanimate-gifs {last}
-downgrade-http-version
- -fast-redirects
- +filter {js-annoyances}
- +filter {html-annoyances}
+ +fast-redirects {check-decoded-url}
+ -filter {js-events}
+ -filter {content-cookies}
+ -filter {all-popups}
+ -filter {banners-by-link}
+ -filter {tiny-textforms}
+ -filter {frameset-borders}
+ -filter {demoronizer}
+ -filter {shockwave-flash}
+ -filter {quicktime-kioskmode}
+ -filter {fun}
+ -filter {crude-parental}
+ -filter {site-specifics}
+ -filter {js-annoyances}
+ -filter {html-annoyances}
+filter {refresh-tags}
- +filter {unsolicited-popups}
+ -filter {unsolicited-popups}
+filter {img-reorder}
+filter {banners-by-size}
+filter {webbugs}
+filter {jumping-windows}
+filter {ie-exploits}
- -filter-client-headers
- -filter-server-headers
+ -filter {google}
+ -filter {yahoo}
+ -filter {msn}
+ -filter {blogspot}
+ -filter {no-ping}
-force-text-mode
-handle-as-empty-document
-handle-as-image
-redirect
-send-vanilla-wafer
-send-wafer
+ -server-header-filter{xml-to-html}
+ -server-header-filter{html-to-xml}
-session-cookies-only
+set-image-blocker {pattern}
-treat-forbidden-connects-like-blocks </screen>
<para>
<screen>
- { +block +handle-as-image }
- .ad.doubleclick.net
-
- { +block +handle-as-image }
+ { +block }
ad*.
+ { +block }
+ .ad.
+
{ +block +handle-as-image }
- .doubleclick.net
+ .[a-vx-z]*.doubleclick.net
</screen>
</para>
<para>
- We'll just show the interesting part here, the explicit matches. It is
- matched three different times. Each as an <quote>+block +handle-as-image</quote>,
+ We'll just show the interesting part here - the explicit matches. It is
+ matched three different times. Two <quote>+block</quote> sections,
+ and a <quote>+block +handle-as-image</quote>,
which is the expanded form of one of our aliases that had been defined as:
- <quote>+imageblock</quote>. (<link
+ <quote>+block-as-image</quote>. (<link
linkend="ALIASES"><quote>Aliases</quote></link> are defined in
the first section of the actions file and typically used to combine more
than one action.)
is done here -- as both a <link
linkend="BLOCK"><quote>+block</quote></link>
<emphasis>and</emphasis> an
- <link
- linkend="HANDLE-AS-IMAGE"><quote>+handle-as-image</quote></link>.
- The custom alias <quote>+imageblock</quote> just simplifies the process and make
- it more readable.
+ <link linkend="HANDLE-AS-IMAGE"><quote>+handle-as-image</quote></link>.
+ The custom alias <quote><literal>+block-as-image</literal></quote> just
+ simplifies the process and make it more readable.
</para>
<para>
{-add-header
-block
+ -client-header-filter{hide-tor-exit-notation}
-content-type-overwrite
-crunch-client-header
-crunch-if-none-match
-crunch-server-header
+deanimate-gifs
-downgrade-http-version
- +fast-redirects{check-decoded-url}
- +filter{html-annoyances}
- +filter{js-annoyances}
- +filter{kill-popups}
- +filter{webbugs}
- +filter{nimda}
- +filter{banners-by-size}
- +filter{hal}
- +filter{fun}
- -filter-client-headers
- -filter-server-headers
+ +fast-redirects {check-decoded-url}
+ -filter {js-events}
+ -filter {content-cookies}
+ -filter {all-popups}
+ -filter {banners-by-link}
+ -filter {tiny-textforms}
+ -filter {frameset-borders}
+ -filter {demoronizer}
+ -filter {shockwave-flash}
+ -filter {quicktime-kioskmode}
+ -filter {fun}
+ -filter {crude-parental}
+ -filter {site-specifics}
+ -filter {js-annoyances}
+ -filter {html-annoyances}
+ +filter {refresh-tags}
+ -filter {unsolicited-popups}
+ +filter {img-reorder}
+ +filter {banners-by-size}
+ +filter {webbugs}
+ +filter {jumping-windows}
+ +filter {ie-exploits}
+ -filter {google}
+ -filter {yahoo}
+ -filter {msn}
+ -filter {blogspot}
+ -filter {no-ping}
-force-text-mode
-handle-as-empty-document
-handle-as-image
+hide-referer{forge}
-hide-user-agent
-inspect-jpegs
- +kill-popups
+ -kill-popups
-overwrite-last-modified
+prevent-compression
-redirect
-send-vanilla-wafer
- -send-wafer
+ -send-wafer
+ -server-header-filter{xml-to-html}
+ -server-header-filter{html-to-xml}
+session-cookies-only
+set-image-blocker{blank}
-treat-forbidden-connects-like-blocks }
<para>
Ooops, the <quote>/adsl/</quote> is matching <quote>/ads</quote> in our
configuration! But we did not want this at all! Now we see why we get the
- blank page. We could now add a new action below this that explicitly
- <emphasis>un</emphasis> blocks (<quote>{-block}</quote>) paths with
- <quote>adsl</quote> in them (remember, last match in the configuration wins).
- There are various ways to handle such exceptions. Example:
+ blank page. It is actually triggering two different actions here, and
+ the effects are aggregated so that the URL is blocked, and &my-app; is told
+ to treat the block as if it were an image. But this is, of course, all wrong.
+ We could now add a new action below this (or better in our own
+ <filename>user.action</filename> file) that explicitly
+ <emphasis>un</emphasis> blocks (
+ <link linkend="BLOCK"><quote>{-block}</quote></link>) paths with
+ <quote>adsl</quote> in them (remember, last match in the configuration
+ wins). There are various ways to handle such exceptions. Example:
</para>
<para>
</para>
<para>
- Now the page displays ;-) Be sure to flush your browser's caches when
- making such changes. Or, try using <literal>Shift+Reload</literal>.
+ Now the page displays ;-)
+ Remember to flush your browser's caches when making these kinds of changes to
+ your configuration to insure that you get a freshly delivered page! Or, try
+ using <literal>Shift+Reload</literal>.
</para>
<para>
</para>
<para>
- That actually was very telling and pointed us quickly to where the problem
+ That actually was very helpful and pointed us quickly to where the problem
was. If you don't get this kind of match, then it means one of the default
- rules in the first section is causing the problem. This would require some
- guesswork, and maybe a little trial and error to isolate the offending rule.
- One likely cause would be one of the <quote>{+filter}</quote> actions. These
- tend to be harder to troubleshoot. Try adding the URL for the site to one of
- aliases that turn off <quote>+filter</quote>:
+ rules in the first section of <filename>default.action</filename> is causing
+ the problem. This would require some guesswork, and maybe a little trial and
+ error to isolate the offending rule. One likely cause would be one of the
+ <link linkend="FILTER"><quote>+filter</quote></link> actions.
+ These tend to be harder to troubleshoot.
+ Try adding the URL for the site to one of aliases that turn off
+ <link linkend="FILTER"><quote>+filter</quote></link>:
</para>
<para>
<screen>
- {shop}
+ { shop }
.quietpc.com
.worldpay.com # for quietpc.com
.jungle.com
</para>
<para>
- <quote>{shop}</quote> is an <quote>alias</quote> that expands to
- <quote>{ -filter -session-cookies-only }</quote>.
+ <quote><literal>{ shop }</literal></quote> is an <quote>alias</quote> that expands to
+ <quote><literal>{ -filter -session-cookies-only }</literal></quote>.
Or you could do your own exception to negate filtering:
</para>
<para>
<screen>
- {-filter}
+ { -filter }
+ # Disable ALL filter actions for sites in this section
.forbes.com
+ developer.ibm.com
+ localhost
</screen>
</para>
<para>
- This would turn off all filtering for that site. This would probably be most
- appropriately put in <filename>user.action</filename>, for local site
- exceptions.
+ This would turn off all filtering for these sites. This is best
+ put in <filename>user.action</filename>, for local site
+ exceptions. Note that when a simple domain pattern is used by itself (without
+ the subsequent path portion), all sub-pages within that domain are included
+ automatically in the scope of the action.
</para>
<para>
Images that are inexplicably being blocked, may well be hitting the
- <quote>+filter{banners-by-size}</quote> rule, which assumes
- that images of certain sizes are ad banners (works well most of the time
- since these tend to be standardized).
+<link linkend="FILTER-BANNERS-BY-SIZE"><quote>+filter{banners-by-size}</quote></link>
+ rule, which assumes
+ that images of certain sizes are ad banners (works well
+ <emphasis>most of the time</emphasis> since these tend to be standardized).
+</para>
+
+<para>
+ <quote><literal>{ fragile }</literal></quote> is an alias that disables most
+ actions that are the most likely to cause trouble. This can be used as a
+ last resort for problem sites.
+</para>
+<para>
+ <screen>
+
+ { fragile }
+ # Handle with care: easy to break
+ mail.google.
+ mybank.example.com</screen>
</para>
+
<para>
- <quote>{fragile}</quote> is an alias that disables most actions. This can be
- used as a last resort for problem sites. Remember to flush caches! If this
- still does not work, you will have to go through the remaining actions one by
- one to find which one(s) is causing the problem.
+ <emphasis>Remember to flush caches!</emphasis> Note that the
+ <literal>mail.google</literal> reference lacks the TLD portion (e.g.
+ <quote>.com</quote>. This will effectively match any TLD with
+ <literal>google</literal> in it, such as <literal>mail.google.de</literal>,
+ just as an example.
+</para>
+<para>
+ If this still does not work, you will have to go through the remaining
+ actions one by one to find which one(s) is causing the problem.
</para>
</sect2>
USA
$Log: user-manual.sgml,v $
+ Revision 2.31 2007/06/02 14:01:37 fabiankeil
+ Start to document forward-override{}.
+
+ Revision 2.30 2007/04/25 15:10:36 fabiankeil
+ - Describe installation for FreeBSD.
+ - Start to document taggers and tag patterns.
+ - Don't confuse devils and daemons.
+
+ Revision 2.29 2007/04/05 11:47:51 fabiankeil
+ Some updates regarding header filtering,
+ handling of compressed content and redirect's
+ support for pcrs commands.
+
+ Revision 2.28 2006/12/10 23:42:48 hal9
+ Fix various typos reported by Adam P. Thanks.
+
+ Revision 2.27 2006/11/14 01:57:47 hal9
+ Dump all docs prior to 3.0.6 release. Various minor changes to faq and user
+ manual.
+
+ Revision 2.26 2006/10/24 11:16:44 hal9
+ Add new filters.
+
+ Revision 2.25 2006/10/18 10:50:33 hal9
+ Add note that since filters are off in Cautious, compression is ON. Turn off
+ compression to make filters work on all sites.
+
+ Revision 2.24 2006/10/03 11:13:54 hal9
+ More references to the new filters. Include html this time around.
+
+ Revision 2.23 2006/10/02 22:43:53 hal9
+ Contains new filter definitions from Fabian, and few other miscellaneous
+ touch-ups.
+
+ Revision 2.22 2006/09/22 01:27:55 hal9
+ Final commit of probably various minor changes here and there. Unless
+ something changes this should be ready for pending release.
+
+ Revision 2.21 2006/09/20 03:21:36 david__schmidt
+ Just the tiniest tweak. Wafer thin!
+
Revision 2.20 2006/09/10 14:53:54 hal9
Results of spell check. User manual has some updates to standard.actions file
info.
projects / privoxy.git / blobdiff