<!entity license SYSTEM "license.sgml">
<!entity p-authors SYSTEM "p-authors.sgml">
<!entity config SYSTEM "p-config.sgml">
-<!entity p-version "3.0.7">
+<!entity p-version "3.0.10">
<!entity p-status "stable">
<!entity % p-authors-formal "INCLUDE"> <!-- include additional text, etc -->
<!entity % p-not-stable "IGNORE">
This file belongs into
ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/
- $Id: user-manual.sgml,v 2.37 2007/08/27 16:09:55 fabiankeil Exp $
+ $Id: user-manual.sgml,v 2.80 2008/07/18 16:54:30 fabiankeil Exp $
- Copyright (C) 2001-2007 Privoxy Developers http://www.privoxy.org/
+ Copyright (C) 2001-2008 Privoxy Developers http://www.privoxy.org/
See LICENSE.
========================================================================
<subscript>
<!-- Completely the wrong markup, but very little is allowed -->
<!-- in this part of an article. FIXME -->
- <link linkend="copyright">Copyright</link> &my-copy; 2001 - 2007 by
+ <link linkend="copyright">Copyright</link> &my-copy; 2001 - 2008 by
<ulink url="http://www.privoxy.org/">Privoxy Developers</ulink>
</subscript>
</pubdate>
-<pubdate>$Id: user-manual.sgml,v 2.37 2007/08/27 16:09:55 fabiankeil Exp $</pubdate>
+<pubdate>$Id: user-manual.sgml,v 2.80 2008/07/18 16:54:30 fabiankeil Exp $</pubdate>
<!--
</sect3>
<!-- ~~~~~ New section ~~~~~ -->
-<sect3 id="installation-deb"><title>Debian</title>
+<sect3 id="installation-deb"><title>Debian and Ubuntu</title>
<para>
DEBs can be installed with <literal>apt-get install privoxy</literal>,
and will use <filename>/etc/privoxy</filename> for the location of
in the same directory as you installed <application>Privoxy</application> in.
</para>
<para>
- Version 3.0.
4 introduced full <application>Windows</application> service
+ Version 3.0.
5 beta introduced full <application>Windows</application> service
functionality. On Windows only, the <application>Privoxy</application>
program has two new command line arguments to install and uninstall
<application>Privoxy</application> as a <emphasis>service</emphasis>.
</sect3>
<!-- ~~~~~ New section ~~~~~ -->
-<sect3 id="installation-pack-bintgz"><title>Solaris, NetBSD, HP-UX</title>
+<sect3 id="installation-pack-bintgz"><title>Solaris <!--, NetBSD, HP-UX--></title>
<para>
Create a new directory, <literal>cd</literal> to it, then unzip and
</sect3>
<!-- ~~~~~ New section ~~~~~ -->
-<sect3 id="installation-mac"><title>Mac OSX</title>
-<para>
- Unzip the downloaded file (you can either double-click on the file
- from the finder, or from the desktop if you downloaded it there).
- Then, double-click on the package installer icon named
- <literal>Privoxy.pkg</literal>
- and follow the installation process.
- <application>Privoxy</application> will be installed in the folder
- <literal>/Library/Privoxy</literal>.
- It will start automatically whenever you start up. To prevent it from
- starting automatically, remove or rename the folder
- <literal>/Library/StartupItems/Privoxy</literal>.
-</para>
+<sect3 id="installation-mac"><title>Mac OS X</title>
<para>
- To start Privoxy by hand, double-click on
- <literal>StartPrivoxy.command</literal> in the
- <literal>/Library/Privoxy</literal> folder.
- Or, type this command in the Terminal:
+ Unzip the downloaded file (you can either double-click on the zip file
+ icon from the Finder, or from the desktop if you downloaded it there).
+ Then, double-click on the package installer icon and follow the
+ installation process.
</para>
<para>
- <screen>
- /Library/Privoxy/StartPrivoxy.command
- </screen>
+ The privoxy service will automatically start after a successful
+ installation (in addition to every time your computer starts up). To
+ prevent the privoxy service from automatically starting when your
+ computer starts up, remove or rename the folder named
+ <literal>/Library/StartupItems/Privoxy</literal>.
</para>
<para>
- You will be prompted for the administrator password.
+ To manually start or stop the privoxy service, use the Privoxy Utility
+ for Mac OS X. This application controls the privoxy service (e.g.
+ starting and stopping the service as well as uninstalling the software).
</para>
</sect3>
<para>
The port skeleton and the package can also be downloaded from the
<ulink url="https://sourceforge.net/project/showfiles.php?group_id=11118">File Release
- Page</ulink>, but if you're interested in stable releases only you don't
- gain anything by using them.
+ Page</ulink>, but there's no reason to use them unless you're interested in the
+ beta releases which are only available there.
</para>
</sect3>
<sect1 id="whatsnew">
<title>What's New in this Release</title>
<para>
- There are many improvements and new features since <application>Privoxy 3.0.6</application>, the last stable release:
+ There are many improvements and new features since <application>Privoxy 3.0.8</application>, the last stable release:
</para>
<para>
<itemizedlist>
<listitem>
<para>
- Header filtering can be done with dedicated header filters now. As a result
- the actions <quote>filter-client-headers</quote> and <quote>filter-server-headers</quote>
- that were introduced with <application>Privoxy 3.0.5</application> to apply
- the content filters to the headers as, well have been removed again.
+ Added SOCKS5 support (with address resolution done by
+ the SOCKS5 server). Patch provided by Eric M. Hopper.
</para>
</listitem>
-
-<!-- pre-3.0.6 changes:
- <listitem>
- <para>
- There are a number of new <link linkend="actions-file">actions</link>:
- </para>
-
- <para>
- <itemizedlist>
-
- <listitem>
- <para>
- <literal><link linkend="content-type-overwrite">content-type-overwrite</link></literal>
- </para>
- </listitem>
- <listitem>
- <para>
- <literal><link linkend="crunch-client-header">crunch-client-header</link></literal>
- </para>
- </listitem>
- <listitem>
- <para>
- <literal><link linkend="crunch-if-none-match">crunch-if-none-match</link></literal>
- </para>
- </listitem>
- <listitem>
- <para>
- <literal><link linkend="crunch-server-header">crunch-server-header</link></literal>
- </para>
- </listitem>
- <listitem>
- <para>
- <literal><link linkend="filter-client-headers">filter-client-headers</link></literal>
- </para>
- </listitem>
- <listitem>
- <para>
- <literal><link linkend="filter-server-headers">filter-server-headers</link></literal>
- </para>
- </listitem>
- <listitem>
- <para>
- <literal><link linkend="force-text-mode">force-text-mode</link></literal>
- </para>
- </listitem>
- <listitem>
- <para>
- <literal><link linkend="handle-as-empty-document">handle-as-empty-document</link></literal>
- </para>
- </listitem>
- <listitem>
- <para>
- <literal><link linkend="hide-accept-language">hide-accept-language</link></literal>
- </para>
- </listitem>
- <listitem>
- <para>
- <literal><link linkend="hide-content-disposition">hide-content-disposition</link></literal>
- </para>
- </listitem>
- <listitem>
- <para>
- <literal><link linkend="hide-if-modified-since">hide-if-modified-since</link></literal>
- </para>
- </listitem>
- <listitem>
- <para>
- <literal><link linkend="inspect-jpegs">inspect-jpegs</link></literal>
- </para>
- </listitem>
- <listitem>
- <para>
- <literal><link linkend="overwrite-last-modified">overwrite-last-modified</link></literal>
- </para>
- </listitem>
- <listitem>
- <para>
- <literal><link linkend="redirect">redirect</link></literal>
- </para>
- </listitem>
- <listitem>
- <para>
- <literal><link linkend="treat-forbidden-connects-like-blocks">treat-forbidden-connects-like-blocks</link></literal>
- </para>
- </listitem>
-
- </itemizedlist>
- </para>
- <para>
- In addition, <literal><link linkend="fast-redirects">fast-redirects</link></literal>
- has been significantly improved with enhanced syntax.
- </para>
+ <listitem>
<para>
- And <literal><link linkend="hide-referrer">hide-referrer</link></literal>
- has a new option, <literal>conditional block</literal>.
+ The "blocked" CGI pages include a block reason that was
+ provided as argument to the last-applying block action.
</para>
-
- </listitem>
-
+ </listitem>
<listitem>
<para>
- <application>MS-Windows</application> versions can now be
- <link
- linkend="installation-pack-win">installed and
- started as a <emphasis>Windows service</emphasis></link>.
+ If enable-edit-actions is disabled (the default since 3.0.7 beta)
+ the show-status page hides the edit buttons and explains why.
+ Previously the user would get the "this feature has been disabled"
+ message after using the edit button.
</para>
</listitem>
-
<listitem>
<para>
- <filename>config</filename> has two new options:
- <link
- linkend="enable-remote-http-toggle">enable-remote-http-toggle</link>,
- and <link
- linkend="forwarded-connect-retries">forwarded-connect-retries</link>.
+ Forbidden CONNECT requests are treated like blocks by default.
+ The now-pointless treat-forbidden-connects-like-blocks action
+ has been removed.
</para>
+ </listitem>
+ <listitem>
<para>
- And there is improved handling of the <link
- linkend="user-manual">user-manual</link>
- option, for placing documentation and help files on the local system.
+ Not enabling limit-connect now allows CONNECT requests to all ports.
+ In previous versions it would only allow CONNECT requests to port 443.
+ Use +limit-connect{443} if you think you need the old default behaviour.
</para>
</listitem>
-
<listitem>
<para>
- There are six new <link linkend="FILTER">filters</link>.
+ The CGI editor gets turned off after three edit requests with invalid
+ file modification timestamps. This makes life harder for attackers
+ who can leverage browser bugs to send fake Referers and intend to
+ brute-force edit URLs.
</para>
</listitem>
-
<listitem>
<para>
- Actions files problems and suggestions are now being directed to:
- <ulink url="http://sourceforge.net/tracker/?group_id=11118&atid=460288">http://sourceforge.net/tracker/?group_id=11118&atid=460288</ulink>.
- Please use this to report such configuration related problems as missed
- ads, sites that don't function properly due to one action or another,
- innocent images being blocked, etc.
+ Action settings for multiple patterns in the same section are
+ shared in memory. As a result these sections take up less space
+ (and are loaded slightly faster). Problem reported by Franz Schwartau.
</para>
</listitem>
-
<listitem>
<para>
- In addition, there are numerous bug fixes and significant enhancements,
- including error pages should no longer be cached if the problem is fixed,
- much better DNS error handling, various logging improvements, and
- configuration updates for better ad blocking and junk elimination.
+ Linear white space in HTTP headers will be normalized to single
+ spaces before parsing the header's content, headers split across
+ multiple lines get merged first.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Host information is gathered outside the main thread so it's less
+ likely to delay other incoming connections if the host is misconfigured.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ New config option "hostname" to use a hostname other than
+ the one returned by the operating system. Useful to speed-up responses
+ for CGI requests on misconfigured systems. Requested by Max Khon.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ The CGI editor supports the "disable all filters of this type"
+ directives "-client-header-filter", "-server-header-filter",
+ "-client-header-tagger" and "-server-header-tagger".
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Fixed false-positives with the link-by-url filter and URLs that
+ contain the pattern "/jump/".
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ The less-download-windows filter no longer messes
+ "Content-Type: application/x-shockwave-flash" headers up.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ In the show-url-info page's "Final results" section active and
+ inactive actions are listed separately. Patch provided by Lee.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ The GNUmakefile supports the DESTDIR variable. Patch for
+ the install target submitted by Radoslaw Zielinski.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Embedding the content of configuration files in the show-status
+ page is significantly faster now. For a largish action file (1 MB)
+ a speedup of about 2450 times has been measured. This is mostly
+ interesting if you are using large action files or regularly use
+ Privoxy-Regression-Test while running Privoxy through Valgrind,
+ for stock configuration files it doesn't really matter.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ If zlib support is unavailable and there are content
+ filters active but the prevent-compression action is disabled,
+ the show-url-info page includes a warning that compression
+ might prevent filtering.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ The show-url-info page provides an OpenSearch Description that
+ allows to access the page through browser search plugins.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ The obsolete kill-popups action has been removed as the
+ PCRS-based popup filters can do the same and are slightly
+ less unreliable.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ The inspect-jpegs action has been removed.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ The send-wafer and send-vanilla-wafer actions have been removed.
+ They weren't particular useful and their behaviour could be emulated
+ with add-header anyway.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Privoxy-Regression-Test has been significantly improved.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Most sections in the default.action file contain tests for
+ Privoxy-Regression-Test to verify that they are working as intended.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Parts of Privoxy have been refactored to increase maintainability.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Building with zlib (if available) is done by default.
</para>
</listitem>
--->
-
</itemizedlist>
</para>
+<para>
+ For a more detailed list of changes please have a look at the ChangeLog.
+</para>
+
<!-- ~~~~~ New section ~~~~~ -->
<sect2 id="upgradersnote">
<para>
<itemizedlist>
+ <listitem>
+ <para>
+ The recommended way to upgrade &my-app; is to backup your old
+ configuration files, install the new ones, verify that &my-app;
+ is working correctly and finally merge back your changes using
+ <application>diff</application> and maybe <application>patch</application>.
+ </para>
+ <para>
+ There are a number of new features in each &my-app; release and
+ most of them have to be explicitly enabled in the configuration
+ files. Old configuration files obviously don't do that and due
+ to syntax changes using old configuration files with a new
+ &my-app; isn't always possible anyway.
+ </para>
+ </listitem>
<listitem>
<para>
- Some installers may remove earlier versions completely, including
- configuration files. Save any important configuration files!
+ Note that some installers remove earlier versions completely,
+ including configuration files, therefore you should really save
+ any important configuration files!
</para>
</listitem>
<listitem>
<para>
- On the other hand, other installers may not overwrite any existing configuration
- files, thinking you will want to do that. You may want to manually check
- your saved files against the newer versions to see if the improvements have
- merit, or whether there are new options that you may want to consider.
- There are a number of new features, but most won't be available unless
- these features are incorporated into your configuration somehow.
+ On the other hand, other installers don't overwrite existing configuration
+ files, thinking you will want to do that yourself.
</para>
</listitem>
<listitem>
- <para>
- See the full documentation on
- <literal><link linkend="fast-redirects">fast-redirects</link></literal>
- which has changed syntax, and will require adjustments to local configs,
- such as <filename>user.action</filename>. You must reference the new
- syntax:
- </para>
- <para>
- <screen>
- { +fast-redirects{check-decoded-url} }
- .example.com
- mybank.com
- .google.</screen>
-</para>
+ <para>
+ <filename>standard.action</filename> now only includes the enabled actions.
+ Not all actions as before.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ In the default configuration only fatal errors are logged now.
+ You can change that in the <link linkend="DEBUG">debug section</link>
+ of the configuration file. You may also want to enable more verbose
+ logging until you verified that the new &my-app; version is working
+ as expected.
+ </para>
+ </listitem>
- </listitem>
<listitem>
<para>
- The <filename>jarfile</filename>,
- <ulink url="http://en.wikipedia.org/wiki/Browser_cookie">cookie</ulink> logger, is off by default now.
+ Three other config file settings are now off by default:
+ <link linkend="enable-remote-toggle">enable-remote-toggle</link>,
+ <link linkend="enable-remote-http-toggle">enable-remote-http-toggle</link>,
+ and <link linkend="enable-edit-actions">enable-edit-actions</link>.
+ If you use or want these, you will need to explicitly enable them, and
+ be aware of the security issues involved.
</para>
</listitem>
+ <listitem>
+ <para>
+ The <quote>filter-client-headers</quote> and
+ <quote>filter-server-headers</quote> actions that were introduced with
+ <application>Privoxy 3.0.5</application> to apply content filters to
+ the headers have been removed and replaced with new actions.
+ See the <link
+ linkend="whatsnew">What's New section</link> above.
+ </para>
+ </listitem>
+
+
+<!--
<listitem>
<para>
What constitutes a <quote>default</quote> configuration has changed,
settings as yet (see above).
</para>
</listitem>
-
+-->
+<!--
<listitem>
<para>
The default actions setting is now <literal>Cautious</literal>. Previous
<listitem>
<para>
-<!-- I think it is best to keep this somewhat vague, in case -->
-<!-- the situation changes under our feet. -->
Some installers may not automatically start
<application>Privoxy</application> after installation.
</para>
</listitem>
-
+-->
</itemizedlist>
</para>
+
</sect2>
</sect1>
by setting the proxy configuration for address of
<literal>127.0.0.1</literal> and port <literal>8118</literal>.
<emphasis>DO NOT</emphasis> activate proxying for <literal>FTP</literal> or
- any protocols besides HTTP and HTTPS (SSL)! It won't work!
+ any protocols besides HTTP and HTTPS (SSL) unless you intend to prevent your
+ browser from using these protocols.
</para>
</listitem>
A default installation should provide a reasonable starting point for
most. There will undoubtedly be occasions where you will want to adjust the
configuration, but that can be dealt with as the need arises. Little
- to no initial configuration is required in most cases.
+ to no initial configuration is required in most cases, you may want
+ to enable the
+ <ulink url="config.html#ENABLE-EDIT-ACTIONS">web-based action editor</ulink> though.
+ Be sure to read the warnings first.
</para>
<para>
See the <link linkend="configuration">Configuration section</link> for more
</para>
</listitem>
+<!--
+ Did anyone test these lately?
+ fk 2007-11-10
<listitem>
<para>
For easy access to &my-app;'s most important controls, drag the provided
personal toolbar.
</para>
</listitem>
+-->
<listitem>
<para>
Now enjoy surfing with enhanced control, comfort and privacy!
</para>
</listitem>
-
+
</itemizedlist>
</para>
Secondly, a brief explanation of <application>Privoxy's </application>
<quote>actions</quote>. <quote>Actions</quote> in this context, are
the directives we use to tell <application>Privoxy</application> to perform
- some task relating to WWW transactions (i.e. web browsing). We tell
+ some task relating to HTTP transactions (i.e. web browsing). We tell
<application>Privoxy</application> to take some <quote>action</quote>. Each
action has a unique name and function. While there are many potential
<application>actions</application> in <application>Privoxy's</application>
</itemizedlist>
</para>
+<para>
+ Advanced users will eventually want to explore &my-app;
+ <literal><link linkend="filter">filters</link></literal> as well. Filters
+ are very different from <literal><link
+ linkend="block">blocks</link></literal>.
+ A <quote>block</quote> blocks a site, page, or unwanted contented. Filters
+ are a way of filtering or modifying what is actually on the page. An example
+ filter usage: a text replacement of <quote>no-no</quote> for
+ <quote>nasty-word</quote>. That is a very simple example. This process can be
+ used for ad blocking, but it is more in the realm of advanced usage and has
+ some pitfalls to be wary off.
+</para>
+
<para>
The quickest way to adjust any of these settings is with your browser through
the special <application>Privoxy</application> editor at <ulink
url="http://config.privoxy.org/show-status">http://config.privoxy.org/show-status</ulink>
(shortcut: <ulink url="http://p.p/">http://p.p/show-status</ulink>). This
- is an internal page, and does not require Internet access. Select the
- appropriate <quote>actions</quote> file, and click
+ is an internal page, and does not require Internet access.
+</para>
+
+<para>
+ Note that as of <application>Privoxy</application> 3.0.7 beta the
+ action editor is disabled by default. Check the
+ <ulink url="config.html#ENABLE-EDIT-ACTIONS">enable-edit-actions
+ section in the configuration file</ulink> to learn why and in which
+ cases it's safe to enable again.
+</para>
+
+<para>
+ If you decided to enable the action editor, select the appropriate
+ <quote>actions</quote> file, and click
<quote><guibutton>Edit</guibutton></quote>. It is best to put personal or
local preferences in <filename>user.action</filename> since this is not
meant to be overwritten during upgrades, and will over-ride the settings in
</para>
<literallayout>
- <guibutton>Tools</guibutton> -> <guibutton>Options</guibutton> -> <guibutton>General</guibutton> -> <guibutton>Connection Settings</guibutton> -> <guibutton>Manual Proxy Configuration</guibutton>
+ <guibutton>Tools</guibutton> -> <guibutton>Options</guibutton> -> <guibutton>Advanced</guibutton> -> <guibutton>Network</guibutton> -><guibutton>Connection</guibutton> -> <guibutton>Settings</guibutton>
</literallayout>
</literallayout>
<para>
- For <application>Internet Explorer v.5-6</application>:
+ For <application>Internet Explorer v.5-7</application>:
</para>
<literallayout>
</para>
</sect2>
-<!--
- omitting 10/31/06 HB
-
-<sect2 id="start-suse">
-<title>SuSE</title>
-<para>
-We use a script. It will use the file <filename>/etc/privoxy/config</filename>
-as its main configuration file. Note that SuSE starts Privoxy upon booting
-your PC.
-</para>
-<para>
- <screen>
- # rcprivoxy start
-</screen>
-</para>
-</sect2>
--->
<sect2 id="start-windows">
<title>Windows</title>
<para>
</sect2>
<sect2 id="start-macosx">
-<title>Mac OSX</title>
+<title>Mac OS X</title>
<para>
- During installation, <application>Privoxy</application> is configured to
- start automatically when the system restarts. To start &my-app; manually,
- double-click on the <literal>StartPrivoxy.command</literal> icon in the
- <literal>/Library/Privoxy</literal> folder. Or, type this command
- in the Terminal:
+ After downloading the privoxy software, unzip the downloaded file by
+ double-clicking on the zip file icon. Then, double-click on the
+ installer package icon and follow the installation process.
+</para>
+<para>
+ The privoxy service will automatically start after a successful
+ installation. In addition, the privoxy service will automatically
+ start every time your computer starts up.
+</para>
+<para>
+ To prevent the privoxy service from automatically starting when your
+ computer starts up, remove or rename the folder named
+ /Library/StartupItems/Privoxy.
+</para>
+<para>
+ A simple application named Privoxy Utility has been created which
+ enables administrators to easily start and stop the privoxy service.
</para>
<para>
- <screen>
- /Library/Privoxy/StartPrivoxy.command
- </screen>
+ In addition, the Privoxy Utility presents a simple way for
+ administrators to edit the various privoxy config files. A method
+ to uninstall the software is also available.
</para>
<para>
- You will be prompted for the administrator password.
+ An administrator username and password must be supplied in order for
+ the Privoxy Utility to perform any of the tasks.
</para>
</sect2>
<para>
Another feature where you will probably want to define exceptions for trusted
- sites is the popup-killing (through the <ulink
- url="actions-file.html#KILL-POPUPS"><quote>+kill-popups</quote></ulink> and
- <ulink
- url="actions-file.html#FILTER-POPUPS"><quote>+filter{popups}</quote></ulink>
- actions), because your favorite shopping, banking, or leisure site may need
+ sites is the popup-killing (through <ulink
+ url="actions-file.html#FILTER-POPUPS"><quote>+filter{popups}</quote></ulink>),
+ because your favorite shopping, banking, or leisure site may need
popups (explained below).
</para>
▪ <ulink url="http://config.privoxy.org/toggle">Toggle Privoxy on or off</ulink>
</member>
<member>
- ▪ <ulink url="http://www.privoxy.org/
- &p-version;/user-manual/">Documentation</ulink>
+ ▪ <ulink
+ url="http://www.privoxy.org/&p-version;/user-manual/">Documentation</ulink>
</member>
</simplelist>
</msgtext>
your browser.
</para>
+<para>
+ Note that several of the features described above are disabled by default
+ in <application>Privoxy</application> 3.0.7 beta and later.
+ Check the
+ <ulink url="config.html">configuration file</ulink> to learn why
+ and in which cases it's safe to enable them again.
+</para>
+
</sect2>
<!-- ~ End section ~ -->
</para>
<para>
The default profiles, and their associated actions, as pre-defined in
- <filename>standard.action</filename> are<!-- different than this table which is out of date -->:
+ <filename>standard.action</filename> are:
</para>
<para>
<table frame=all><title>Default Configurations</title>
<row>
<entry>Image tag reordering</entry>
<entry>no</entry>
- <entry>no</entry>
+ <entry>yes</entry>
<entry>yes</entry>
</row>
The easiest way to edit the actions files is with a browser by
using our browser-based editor, which can be reached from <ulink
url="http://config.privoxy.org/show-status">http://config.privoxy.org/show-status</ulink>.
- The editor allows both fine-grained control over every single feature on a
- per-URL basis, and easy choosing from wholesale sets of defaults like
- <quote>Cautious</quote>, <quote>Medium</quote> or <quote>Advanced</quote>.
- Warning: the <quote>Advanced</quote> setting is more aggressive, and
- will be more likely to cause problems for some sites. Experienced users only!
-</para>
+ Note: the config file option <link
+ linkend="enable-edit-actions">enable-edit-actions</link> must be enabled for
+ this to work. The editor allows both fine-grained control over every single
+ feature on a per-URL basis, and easy choosing from wholesale sets of defaults
+ like <quote>Cautious</quote>, <quote>Medium</quote> or
+ <quote>Advanced</quote>. Warning: the <quote>Advanced</quote> setting is more
+ aggressive, and will be more likely to cause problems for some sites.
+ Experienced users only!
+ </para>
<para>
If you prefer plain text editing to GUIs, you can of course also directly edit the
<para>
<screen>
- { +<literal>handle-as-image</literal> +<literal>block</literal> }
+ { +<literal>handle-as-image</literal> +<literal>block{Banner ads.}</literal> }
# Block these as if they were images. Send no block page.
banners.example.com
media.example.com/.*banners
<para>
The pattern matching syntax is different for the domain and path parts of
the URL. The domain part uses a simple globbing type matching technique,
- while the path part uses a more flexible
+ while the path part uses more flexible
<ulink url="http://en.wikipedia.org/wiki/Regular_expressions"><quote>Regular
- Expressions (PCRE)</quote></ulink> based syntax.
+ Expressions</quote></ulink> (POSIX 1003.2).
</para>
<variablelist>
<term><literal>.example.com</literal></term>
<listitem>
<para>
- matches any domain that <emphasis>ENDS</emphasis> in
- <literal>.example.com</literal>
+ matches any domain with first-level domain <literal>com</literal>
+ and second-level domain <literal>example</literal>.
+ For example <literal>www.example.com</literal>,
+ <literal>example.com</literal> and <literal>foo.bar.baz.example.com</literal>.
+ Note that it wouldn't match if the second-level domain was <literal>another-example</literal>.
</para>
</listitem>
</varlistentry>
<listitem>
<para>
matches any domain that <emphasis>STARTS</emphasis> with
- <literal>www.</literal>
+ <literal>www.</literal> (It also matches the domain
+ <literal>www</literal> but most of the time that doesn't matter.)
</para>
</listitem>
</varlistentry>
<sect3><title>The Path Pattern</title>
<para>
- <application>Privoxy</application> uses Perl compatible (PCRE)
+ <application>Privoxy</application> uses <quote>modern</quote> POSIX 1003.2
<ulink url="http://en.wikipedia.org/wiki/Regular_expressions"><quote>Regular
- Expression</quote></ulink> based syntax
- (through the <ulink url="http://www.pcre.org/">PCRE</ulink> library) for
- matching the path portion (after the slash), and is thus more flexible.
+ Expressions</quote></ulink> for matching the path portion (after the slash),
+ and is thus more flexible.
</para>
<para>
There is an <link linkend="regex">Appendix</link> with a brief quick-start into regular
- expressions, and full (very technical) documentation on PCRE regex syntax is available on-line
- at <ulink url="http://www.pcre.org/man.txt">http://www.pcre.org/man.txt</ulink>.
- You might also find the Perl man page on regular expressions (<literal>man perlre</literal>)
- useful, which is available on-line at <ulink
- url="http://perldoc.perl.org/perlre.html">http://perldoc.perl.org/perlre.html</ulink>.
+ expressions, you also might want to have a look at your operating system's documentation
+ on regular expressions (try <literal>man re_format</literal>).
</para>
<para>
can tell them apart from URL patterns. Everything after the colon
including white space, is interpreted as a regular expression with
path pattern syntax, except that tag patterns aren't left-anchored
- automatically (Privoxy doesn't silently add a <quote>^</quote>,
+ automatically (&my-app; doesn't silently add a <quote>^</quote>,
you have to do it yourself if you need it).
</para>
</para>
<para>
- For example you could tag client requests which use the POST method,
- use this tag to activate another tagger that adds a tag if cookies
- are send, and then block based on the cookie tag. However if you'd
- reverse the position of the described taggers, and activated the method
- tagger based on the cookie tagger, no method tags would be created.
+ For example you could tag client requests which use the
+ <literal>POST</literal> method,
+ then use this tag to activate another tagger that adds a tag if cookies
+ are sent, and then use a block action based on the cookie tag. This allows
+ the outcome of one action, to be input into a subsequent action. However if
+ you'd reverse the position of the described taggers, and activated the
+ method tagger based on the cookie tagger, no method tags would be created.
The method tagger would look for the request line, but at the time
- the cookie tag is created the request line has already been parsed.
+ the cookie tag is created, the request line has already been parsed.
</para>
<para>
-<replaceable class="function">name</replaceable> # disable action <replaceable class="parameter">name</replaceable></screen>
</para>
<para>
- Example: <literal>+block</literal>
+ Example: <literal>+handle-as-image</literal>
</para>
</listitem>
<term>Type:</term>
<!-- boolean, parameterized, Multi-value -->
<listitem>
- <para>Boolean.</para>
+ <para>Parameterized.</para>
</listitem>
</varlistentry>
<varlistentry>
<term>Parameter:</term>
<listitem>
- <para>N/A</para>
+ <para>A block reason that should be given to the user.</para>
</listitem>
</varlistentry>
<listitem>
<para>
<application>Privoxy</application> sends a special <quote>BLOCKED</quote> page
- for requests to blocked pages. This page contains links to find out why the request
- was blocked, and a click-through to the blocked content (the latter only if compiled with the
- force feature enabled). The <quote>BLOCKED</quote> page adapts to the available
- screen space -- it displays full-blown if space allows, or miniaturized and text-only
- if loaded into a small frame or window. If you are using <application>Privoxy</application>
- right now, you can take a look at the
- <ulink url="http://ads.bannerserver.example.com/nasty-ads/sponsor.html"><quote>BLOCKED</quote>
- page</ulink>.
+ for requests to blocked pages. This page contains the block reason given as
+ parameter, a link to find out why the block action applies, and a click-through
+ to the blocked content (the latter only if the force feature is available and
+ enabled).
</para>
<para>
A very important exception occurs if <emphasis>both</emphasis>
<term>Example usage (section):</term>
<listitem>
<para>
- <screen>{+block}
+ <screen>{+block{No nasty stuff for you.}}
# Block and replace with "blocked" page
.nasty-stuff.example.com
-{+block +handle-as-image}
+{+block{Doubleclick banners.} +handle-as-image}
# Block and replace with image
.ad.doubleclick.net
.ads.r.us/banners/
-{+block +handle-as-empty-document}
+{+block{Layered ads.} +handle-as-empty-document}
# Block and then ignore
- adserver.exampleclick.net/.*\.js$</screen>
+ adserver.example.net/.*\.js$</screen>
</para>
</listitem>
</varlistentry>
Client-header filters are executed after the other header actions have finished
and use their output as input.
</para>
+ <para>
+ If the request URL gets changed, &my-app; will detect that and use the new
+ one. This can be used to rewrite the request destination behind the client's
+ back, for example to specify a Tor exit relay for certain requests.
+ </para>
<para>
Please refer to the <link linkend="filter-file">filter file chapter</link>
to learn which client-header filters are available by default, and how to
<listitem>
<para>
<screen>
+# Hide Tor exit notation in Host and Referer Headers
{+client-header-filter{hide-tor-exit-notation}}
-.exit/
+/
</screen>
</para>
</listitem>
<para>
<screen>
# Tag every request with the User-Agent header
-{+client-header-filter{user-agent}}
+{+client-header-tagger{user-agent}}
/
+
+# Tagging itself doesn't change the action
+# settings, sections with TAG patterns do:
+#
+# If it's a download agent, use a different forwarding proxy,
+# show the real User-Agent and make sure resume works.
+{+forward-override{forward-socks5 10.0.0.2:2222 .} \
+ -hide-if-modified-since \
+ -overwrite-last-modified \
+ -hide-user-agent \
+ -filter \
+ -deanimate-gifs \
+}
+TAG:^User-Agent: NetBSD-ftp/
+TAG:^User-Agent: Novell ZYPP Installer
+TAG:^User-Agent: RPM APT-HTTP/
+TAG:^User-Agent: fetch libfetch/
+TAG:^User-Agent: Ubuntu APT-HTTP/
+TAG:^User-Agent: MPlayer/
</screen>
</para>
</listitem>
<listitem>
<para>
<anchor id="filter-js-annoyances">
- <screen>+filter{js-annoyances} # Get rid of particularly annoying JavaScript abuse</screen>
+ <screen>+filter{js-annoyances} # Get rid of particularly annoying JavaScript abuse.</screen>
</para>
<para>
<anchor id="filter-js-events">
- <screen>+filter{js-events} # Kill all JS event bindings (Radically destructive! Only for extra nasty sites)</screen>
+ <screen>+filter{js-events} # Kill all JS event bindings and timers (Radically destructive! Only for extra nasty sites).</screen>
</para>
<para>
<anchor id="filter-html-annoyances">
- <screen>+filter{html-annoyances} # Get rid of particularly annoying HTML abuse</screen>
+ <screen>+filter{html-annoyances} # Get rid of particularly annoying HTML abuse.</screen>
</para>
<para>
<anchor id="filter-content-cookies">
- <screen>+filter{content-cookies} # Kill cookies that come in the HTML or JS content</screen>
+ <screen>+filter{content-cookies} # Kill cookies that come in the HTML or JS content.</screen>
</para>
<para>
<anchor id="filter-refresh-tags">
- <screen>+filter{refresh-tags} # Kill automatic refresh tags (for dial-on-demand setups)</screen>
+ <screen>+filter{refresh-tags} # Kill automatic refresh tags (for dial-on-demand setups).</screen>
</para>
<para>
<anchor id="filter-unsolicited-popups">
</para>
<para>
<anchor id="filter-img-reorder">
- <screen>+filter{img-reorder} # Reorder attributes in <img> tags to make the banners-by-* filters more effective</screen>
+ <screen>+filter{img-reorder} # Reorder attributes in <img> tags to make the banners-by-* filters more effective.</screen>
</para>
<para>
<anchor id="filter-banners-by-size">
- <screen>+filter{banners-by-size} # Kill banners by size</screen>
+ <screen>+filter{banners-by-size} # Kill banners by size.</screen>
</para>
<para>
<anchor id="filter-banners-by-link">
- <screen>+filter{banners-by-link} # Kill banners by their links to known clicktrackers</screen>
+ <screen>+filter{banners-by-link} # Kill banners by their links to known clicktrackers.</screen>
</para>
<para>
<anchor id="filter-webbugs">
- <screen>+filter{webbugs} # Squish WebBugs (1x1 invisible GIFs used for user tracking)</screen>
+ <screen>+filter{webbugs} # Squish WebBugs (1x1 invisible GIFs used for user tracking).</screen>
</para>
<para>
<anchor id="filter-tiny-textforms">
- <screen>+filter{tiny-textforms} # Extend those tiny textareas up to 40x80 and kill the hard wrap</screen>
+ <screen>+filter{tiny-textforms} # Extend those tiny textareas up to 40x80 and kill the hard wrap.</screen>
</para>
<para>
<anchor id="filter-jumping-windows">
- <screen>+filter{jumping-windows} # Prevent windows from resizing and moving themselves</screen>
+ <screen>+filter{jumping-windows} # Prevent windows from resizing and moving themselves.</screen>
</para>
<para>
<anchor id="filter-frameset-borders">
- <screen>+filter{frameset-borders} # Give frames a border and make them resizeable</screen>
+ <screen>+filter{frameset-borders} # Give frames a border and make them resizable.</screen>
</para>
<para>
<anchor id="filter-demoronizer">
- <screen>+filter{demoronizer} # Fix MS's non-standard use of standard charsets</screen>
+ <screen>+filter{demoronizer} # Fix MS's non-standard use of standard charsets.</screen>
</para>
<para>
<anchor id="filter-shockwave-flash">
- <screen>+filter{shockwave-flash} # Kill embedded Shockwave Flash objects</screen>
+ <screen>+filter{shockwave-flash} # Kill embedded Shockwave Flash objects.</screen>
</para>
<para>
<anchor id="filter-quicktime-kioskmode">
- <screen>+filter{quicktime-kioskmode} # Make Quicktime movies savable</screen>
+ <screen>+filter{quicktime-kioskmode} # Make Quicktime movies saveable.</screen>
</para>
<para>
<anchor id="filter-fun">
</para>
<para>
<anchor id="filter-crude-parental">
- <screen>+filter{crude-parental} # Crude parental filtering (demo only)</screen>
+ <screen>+filter{crude-parental} # Crude parental filtering. Note that this filter doesn't work reliably.</screen>
</para>
<para>
<anchor id="filter-ie-exploits">
- <screen>+filter{ie-exploits} # Disable a known Internet Explorer bug exploits</screen>
+ <screen>+filter{ie-exploits} # Disable some known Internet Explorer bug exploits.</screen>
</para>
<para>
<anchor id="filter-site-specifics">
- <screen>+filter{site-specifics} # Custom filters for specific site related problems</screen>
+ <screen>+filter{site-specifics} # Cure for site-specific problems. Don't apply generally!</screen>
+ </para>
+ <para>
+ <anchor id="filter-no-ping">
+ <screen>+filter{no-ping} # Removes non-standard ping attributes in <a> and <area> tags.</screen>
</para>
<para>
<anchor id="filter-google">
- <screen>+filter{google} # Removes text ads and other Google specific improvements</screen>
+ <screen>+filter{google} # CSS-based block for Google text ads. Also removes a width limitation and the toolbar advertisement.</screen>
</para>
<para>
<anchor id="filter-yahoo">
- <screen>+filter{yahoo} # Removes text ads and other Yahoo specific improvements</screen>
+ <screen>+filter{yahoo} # CSS-based block for Yahoo text ads. Also removes a width limitation.</screen>
</para>
<para>
<anchor id="filter-msn">
- <screen>+filter{msn} # Removes text ads and other MSN specific improvements</screen>
+ <screen>+filter{msn} # CSS-based block for MSN text ads. Also removes tracking URLs and a width limitation.</screen>
</para>
<para>
<anchor id="filter-blogspot">
- <screen>+filter{blogspot} # Cleans up Blogspot blogs</screen>
- </para>
- <para>
- <anchor id="filter-no-ping">
- <screen>+filter{no-ping} # Removes non-standard ping attributes from anchor and area tags</screen>
+ <screen>+filter{blogspot} # Cleans up some Blogspot blogs. Read the fine print before using this.</screen>
</para>
</listitem>
</varlistentry>
<para>
<quote>forward-socks4a 127.0.0.1:9050 .</quote> to use the socks4a proxy listening at
127.0.0.1 port 9050. Replace <quote>forward-socks4a</quote> with <quote>forward-socks4</quote>
- to use a socks4 connection (with local DNS resolution) instead.
+ to use a socks4 connection (with local DNS resolution) instead, use <quote>forward-socks5</quote>
+ for socks5 connections (with remote DNS resolution).
</para>
</listitem>
<listitem>
<quote>forward-socks4a 127.0.0.1:9050 proxy.example.org:8000</quote> to use the socks4a proxy
listening at 127.0.0.1 port 9050 to reach the HTTP proxy listening at proxy.example.org port 8000.
Replace <quote>forward-socks4a</quote> with <quote>forward-socks4</quote> to use a socks4 connection
- (with local DNS resolution) instead.
+ (with local DNS resolution) instead, use <quote>forward-socks5</quote>
+ for socks5 connections (with remote DNS resolution).
</para>
</listitem>
</itemizedlist>
<term>Notes:</term>
<listitem>
<para>
- This action takes parameters similar to the <!-- I hope this link actual works -->
+ This action takes parameters similar to the
<link linkend="forwarding">forward</link> directives in the configuration
file, but without the URL pattern. It can be used as replacement, but normally it's only
used in cases where matching based on the request URL isn't sufficient.
# This way you can continue to use Tor for your normal browsing,
# without overloading the Tor network with your FreeBSD ports updates
# or downloads of bigger files like ISOs.
+# Note that HTTP headers are easy to fake and therefore their
+# values are as (un)trustworthy as your clients and users.
{+forward-override{forward .} \
-hide-if-modified-since \
-overwrite-last-modified \
<para>
<screen># Block all documents on example.org that end with ".js",
# but send an empty document instead of the usual HTML message.
-{+block +handle-as-empty-document}
+{+block{Blocked JavaScript} +handle-as-empty-document}
example.org/.*\.js$
</screen>
</para>
# These don't look like images, but they're banners and should be
# blocked as images:
#
-{+block +handle-as-image}
-some.nasty-banner-server.com/junk.cgi\?output=trash
-
-# Banner source! Who cares if they also have non-image content?
-ad.doubleclick.net
+{+block{Nasty banners.} +handle-as-image}
+nasty-banner-server.example.com/junk.cgi\?output=trash
</screen>
</para>
</listitem>
</para>
<para>
Randomizing the value of the <quote>If-Modified-Since:</quote> makes
- sure it isn't used as a cookie replacement, but you will run into
- caching problems if the random range is too high.
+ it less likely that the server can use the time as a cookie replacement,
+ but you will run into caching problems if the random range is too high.
</para>
<para>
It is a good idea to only use a small negative value and let
</para>
<para>
It is also recommended to use this action together with
- <literal><link linkend="crunch-if-none-match">crunch-if-none-match</link></literal>.
+ <literal><link linkend="crunch-if-none-match">crunch-if-none-match</link></literal>,
+ otherwise it's more or less pointless.
</para>
</listitem>
</varlistentry>
<term>Example usage (section):</term>
<listitem>
<para>
- <screen># Let the browser revalidate without being tracked across sessions
-{ +hide-if-modified-since{-60} \
+ <screen># Let the browser revalidate but make tracking based on the time less likely.
+{+hide-if-modified-since{-60} \
+overwrite-last-modified{randomize} \
+crunch-if-none-match}
/</screen>
<varlistentry>
<term>Typical use:</term>
<listitem>
- <para>Improve privacy by not embedding the source of the request in the HTTP headers.</para>
+ <para>Improve privacy by not forwarding the source of the request in the HTTP headers.</para>
</listitem>
</varlistentry>
<term>Effect:</term>
<listitem>
<para>
- Deletes any existing <quote>X-Forwarded-for:</quote> HTTP header from client requests,
- and prevents adding a new one.
+ Deletes any existing <quote>X-Forwarded-for:</quote> HTTP header from client requests.
</para>
</listitem>
</varlistentry>
<term>Notes:</term>
<listitem>
<para>
- It is safe to leave this on.
+ It is safe and recommended to leave this on.
</para>
</listitem>
</varlistentry>
<listitem>
<para><quote>conditional-block</quote> to delete the header completely if the host has changed.</para>
</listitem>
-<!--
<listitem>
<para><quote>conditional-forge</quote> to forge the header if the host has changed.</para>
</listitem>
--->
<listitem>
<para><quote>block</quote> to delete the header unconditionally.</para>
</listitem>
<para>
Always blocking the referrer, or using a custom one, can lead to
failures on servers that check the referrer before they answer any
- requests, in an attempt to prevent their valuable content from being
+ requests, in an attempt to prevent their content from being
embedded or linked to elsewhere.
</para>
<para>
<varlistentry>
<term>Typical use:</term>
<listitem>
- <para>Conceal your type of browser and client operating system</para>
+ <para>Try to conceal your type of browser and client operating system</para>
</listitem>
</varlistentry>
order to customize their content for different browsers (which, by the
way, is <emphasis>NOT</emphasis> the right thing to do: good web sites
work browser-independently).
- <!--
- <ulink url="http://www.javascriptkit.com/javaindex.shtml">smart way to do
- that</ulink>!).
- -->
</para>
</warning>
<para>
<!-- ~~~~~ New section ~~~~~ -->
-<sect3 renderas="sect4" id="inspect-jpegs">
-<title>inspect-jpegs</title>
-<!--
-new action
--->
+<sect3 renderas="sect4" id="limit-connect">
+<title>limit-connect</title>
+
<variablelist>
<varlistentry>
<term>Typical use:</term>
<listitem>
- <para>To protect against the MS buffer over-run in JPEG processing</para>
+ <para>Prevent abuse of <application>Privoxy</application> as a TCP proxy relay or disable SSL for untrusted sites</para>
</listitem>
</varlistentry>
<term>Effect:</term>
<listitem>
<para>
- Protect against a known exploit
+ Specifies to which ports HTTP CONNECT requests are allowable.
</para>
</listitem>
</varlistentry>
<term>Type:</term>
<!-- Boolean, Parameterized, Multi-value -->
<listitem>
- <para>Boolean.</para>
+ <para>Parameterized.</para>
</listitem>
</varlistentry>
<term>Parameter:</term>
<listitem>
<para>
- N/A
+ A comma-separated list of ports or port ranges (the latter using dashes, with the minimum
+ defaulting to 0 and the maximum to 65K).
</para>
</listitem>
</varlistentry>
<term>Notes:</term>
<listitem>
<para>
- See Microsoft Security Bulletin MS04-028. JPEG images are one of the most
- common image types found across the Internet. The exploit as described can
- allow execution of code on the target system, giving an attacker access
- to the system in question by merely planting an altered JPEG image, which
- would have no obvious indications of what lurks inside. This action
- prevents this exploit.
+ By default, i.e. if no <literal>limit-connect</literal> action applies,
+ <application>Privoxy</application> allows HTTP CONNECT requests to all
+ ports. Use <literal>limit-connect</literal> if fine-grained control
+ is desired for some or all destinations.
</para>
<para>
- Note that the described exploit is only one of many,
- using this action does not mean that you no longer
- have to patch the client.
- </para>
-
+ The CONNECT methods exists in HTTP to allow access to secure websites
+ (<quote>https://</quote> URLs) through proxies. It works very simply:
+ the proxy connects to the server on the specified port, and then
+ short-circuits its connections to the client and to the remote server.
+ This means CONNECT-enabled proxies can be used as TCP relays very easily.
+ </para>
+ <para>
+ <application>Privoxy</application> relays HTTPS traffic without seeing
+ the decoded content. Websites can leverage this limitation to circumvent &my-app;'s
+ filters. By specifying an invalid port range you can disable HTTPS entirely.
+ </para>
</listitem>
</varlistentry>
<varlistentry>
- <term>Example usage:</term>
+ <term>Example usages:</term>
<listitem>
- <para><screen>+inspect-jpegs</screen></para>
+ <!-- I had trouble getting the spacing to look right in my browser -->
+ <!-- I probably have the wrong font setup, bollocks. -->
+ <!-- Apparently the emphasis tag uses a proportional font no matter what -->
+ <para>
+ <screen>+limit-connect{443} # Port 443 is OK.
++limit-connect{80,443} # Ports 80 and 443 are OK.
++limit-connect{-3, 7, 20-100, 500-} # Ports less than 3, 7, 20 to 100 and above 500 are OK.
++limit-connect{-} # All ports are OK
++limit-connect{,} # No HTTPS/SSL traffic is allowed</screen>
+ </para>
</listitem>
</varlistentry>
</variablelist>
</sect3>
-
<!-- ~~~~~ New section ~~~~~ -->
-<sect3 renderas="sect4" id="kill-popups">
-<title>kill-popups<anchor id="kill-popup"></title>
+<sect3 renderas="sect4" id="prevent-compression">
+<title>prevent-compression</title>
<variablelist>
<varlistentry>
<term>Typical use:</term>
<listitem>
- <para>Eliminate those annoying pop-up windows (deprecated)</para>
+ <para>
+ Ensure that servers send the content uncompressed, so it can be
+ passed through <literal><link linkend="filter">filter</link></literal>s.
+ </para>
</listitem>
</varlistentry>
<term>Effect:</term>
<listitem>
<para>
- While loading the document, replace JavaScript code that opens
- pop-up windows with (syntactically neutral) dummy code on the fly.
+ Removes the Accept-Encoding header which can be used to ask for compressed transfer.
</para>
</listitem>
</varlistentry>
<term>Notes:</term>
<listitem>
<para>
- This action is basically a built-in, hardwired special-purpose filter
- action, but there are important differences: For <literal>kill-popups</literal>,
- the document need not be buffered, so it can be incrementally rendered while
- downloading. But <literal>kill-popups</literal> doesn't catch as many pop-ups as
- <literal><link
- linkend="FILTER-ALL-POPUPS">filter{<replaceable>all-popups</replaceable>}</link></literal>
- does and is not as smart as <literal><link
- linkend="FILTER-UNSOLICITED-POPUPS">filter{<replaceable>unsolicited-popups</replaceable>}</link>
- </literal>is.
- </para>
- <para>
- Think of it as a fast and efficient replacement for a filter that you
- can use if you don't want any filtering at all. Note that it doesn't make
- sense to combine it with any <literal><link linkend="filter">filter</link></literal> action,
- since as soon as one <literal><link linkend="filter">filter</link></literal> applies,
- the whole document needs to be buffered anyway, which destroys the advantage of
- the <literal>kill-popups</literal> action over its filter equivalent.
+ More and more websites send their content compressed by default, which
+ is generally a good idea and saves bandwidth. But the <literal><link
+ linkend="filter">filter</link></literal> and
+ <literal><link linkend="deanimate-gifs">deanimate-gifs</link></literal>
+ actions need access to the uncompressed data.
</para>
<para>
- Killing all pop-ups unconditionally is problematic. Many shops and banks rely on
- pop-ups to display forms, shopping carts etc, and the <literal><link
- linkend="FILTER-UNSOLICITED-POPUPS">filter{<replaceable>unsolicited-popups</replaceable>}</link>
- </literal> does a better job of catching only the unwanted ones.
+ When compiled with zlib support (available since &my-app; 3.0.7), content that should be
+ filtered is decompressed on-the-fly and you don't have to worry about this action.
+ If you are using an older &my-app; version, or one that hasn't been compiled with zlib
+ support, this action can be used to convince the server to send the content uncompressed.
</para>
<para>
- If the only kind of pop-ups that you want to kill are exit consoles (those
- <emphasis>really nasty</emphasis> windows that appear when you close an other
- one), you might want to use
- <literal><link
- linkend="filter">filter</link>{<replaceable>js-annoyances</replaceable>}</literal>
- instead.
+ Most text-based instances compress very well, the size is seldom decreased by less than 50%,
+ for markup-heavy instances like news feeds saving more than 90% of the original size isn't
+ unusual.
</para>
<para>
- This action is most appropriate for browsers that don't have any controls
- for unwanted pop-ups. Not recommended for general usage.
- </para>
-
- <!--
- <para>
- An alternate spelling is <literal>+kill-popup</literal>, which is
- interchangeable.
- </para>
- -->
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Example usage:</term>
- <listitem>
- <para><screen>+kill-popups</screen></para>
- </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
-<!-- ~~~~~ New section ~~~~~ -->
-<sect3 renderas="sect4" id="limit-connect">
-<title>limit-connect</title>
-
-<variablelist>
- <varlistentry>
- <term>Typical use:</term>
- <listitem>
- <para>Prevent abuse of <application>Privoxy</application> as a TCP proxy relay or disable SSL for untrusted sites</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Effect:</term>
- <listitem>
- <para>
- Specifies to which ports HTTP CONNECT requests are allowable.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Type:</term>
- <!-- Boolean, Parameterized, Multi-value -->
- <listitem>
- <para>Parameterized.</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Parameter:</term>
- <listitem>
- <para>
- A comma-separated list of ports or port ranges (the latter using dashes, with the minimum
- defaulting to 0 and the maximum to 65K).
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Notes:</term>
- <listitem>
- <para>
- By default, i.e. if no <literal>limit-connect</literal> action applies,
- <application>Privoxy</application> only allows HTTP CONNECT
- requests to port 443 (the standard, secure HTTPS port). Use
- <literal>limit-connect</literal> if more fine-grained control is desired
- for some or all destinations.
- </para>
- <para>
- The CONNECT methods exists in HTTP to allow access to secure websites
- (<quote>https://</quote> URLs) through proxies. It works very simply:
- the proxy connects to the server on the specified port, and then
- short-circuits its connections to the client and to the remote server.
- This can be a big security hole, since CONNECT-enabled proxies can be
- abused as TCP relays very easily.
- </para>
- <para>
- <application>Privoxy</application> relays HTTPS traffic without seeing
- the decoded content. Websites can leverage this limitation to circumvent &my-app;'s
- filters. By specifying an invalid port range you can disable HTTPS entirely.
- If you plan to disable SSL by default, consider enabling
- <literal><link linkend="treat-forbidden-connects-like-blocks ">treat-forbidden-connects-like-blocks</link></literal>
- as well, to be able to quickly create exceptions.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Example usages:</term>
- <listitem>
- <!-- I had trouble getting the spacing to look right in my browser -->
- <!-- I probably have the wrong font setup, bollocks. -->
- <!-- Apparently the emphasis tag uses a proportional font no matter what -->
- <para>
- <screen>+limit-connect{443} # This is the default and need not be specified.
-+limit-connect{80,443} # Ports 80 and 443 are OK.
-+limit-connect{-3, 7, 20-100, 500-} # Ports less than 3, 7, 20 to 100 and above 500 are OK.
-+limit-connect{-} # All ports are OK
-+limit-connect{,} # No HTTPS/SSL traffic is allowed</screen>
- </para>
- </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-<!-- ~~~~~ New section ~~~~~ -->
-<sect3 renderas="sect4" id="prevent-compression">
-<title>prevent-compression</title>
-
-<variablelist>
- <varlistentry>
- <term>Typical use:</term>
- <listitem>
- <para>
- Ensure that servers send the content uncompressed, so it can be
- passed through <literal><link linkend="filter">filter</link></literal>s.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Effect:</term>
- <listitem>
- <para>
- Removes the Accept-Encoding header which can be used to ask for compressed transfer.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Type:</term>
- <!-- Boolean, Parameterized, Multi-value -->
- <listitem>
- <para>Boolean.</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Parameter:</term>
- <listitem>
- <para>
- N/A
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Notes:</term>
- <listitem>
- <para>
- More and more websites send their content compressed by default, which
- is generally a good idea and saves bandwidth. But the <literal><link
- linkend="filter">filter</link></literal>, <literal><link linkend="deanimate-gifs">deanimate-gifs</link></literal>
- and <literal><link linkend="kill-popups">kill-popups</link></literal> actions need
- access to the uncompressed data.
- </para>
- <para>
- When compiled with zlib support (available since &my-app; 3.0.7), content that should be
- filtered is decompressed on-the-fly and you don't have to worry about this action.
- If you are using an older &my-app; version, or one that hasn't been compiled with zlib
- support, this action can be used to convince the server to send the content uncompressed.
- </para>
- <para>
- Most text-based instances compress very well, the size is seldom decreased by less than 50%,
- for markup-heavy instances like news feeds saving more than 90% of the original size isn't
- unusual.
- </para>
- <para>
- Not using compression will therefore slow down the transfer, and you should only
- enable this action if you really need it. As of &my-app; 3.0.7 it's disabled in all
- predefined action settings.
+ Not using compression will therefore slow down the transfer, and you should only
+ enable this action if you really need it. As of &my-app; 3.0.7 it's disabled in all
+ predefined action settings.
</para>
<para>
Note that some (rare) ill-configured sites don't handle requests for uncompressed
and be aware that using your own redirects might make it
possible to fingerprint your requests.
</para>
+ <para>
+ In case of problems with your redirects, or simply to watch
+ them working, enable <link linkend="DEBUG">debug 128</link>.
+ </para>
</listitem>
</varlistentry>
# (Note the $ at the end of the URL pattern to make sure
# the request for the rewritten URL isn't redirected as well)
{+redirect{s@$@&mode=expanded@}}
-undeadly.org/cgi\?action=article&sid=\d*$</screen>
- </para>
- </listitem>
- </varlistentry>
-
-</variablelist>
-</sect3>
+undeadly.org/cgi\?action=article&sid=\d*$
+# Redirect Google search requests to MSN
+{+redirect{s@^http://[^/]*/search\?q=([^&]*).*@http://search.msn.com/results.aspx?q=$1@}}
+.google.com/search
-<!-- ~~~~~ New section ~~~~~ -->
-<sect3 renderas="sect4" id="send-vanilla-wafer">
-<title>send-vanilla-wafer</title>
+# Redirect MSN search requests to Yahoo
+{+redirect{s@^http://[^/]*/results\.aspx\?q=([^&]*).*@http://search.yahoo.com/search?p=$1@}}
+search.msn.com//results\.aspx\?q=
-<variablelist>
- <varlistentry>
- <term>Typical use:</term>
- <listitem>
- <para>
- Feed log analysis scripts with useless data.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Effect:</term>
- <listitem>
- <para>
- Sends a cookie with each request stating that you do not accept any copyright
- on cookies sent to you, and asking the site operator not to track you.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Type:</term>
- <!-- Boolean, Parameterized, Multi-value -->
- <listitem>
- <para>Boolean.</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Parameter:</term>
- <listitem>
- <para>
- N/A
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Notes:</term>
- <listitem>
- <para>
- The vanilla wafer is a (relatively) unique header and could conceivably be used to track you.
- </para>
- <para>
- This action is rarely used and not enabled in the default configuration.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Example usage:</term>
- <listitem>
- <para>
- <screen>+send-vanilla-wafer</screen>
+# Redirect remote requests for this manual
+# to the local version delivered by Privoxy
+{+redirect{s@^http://www@http://config@}}
+www.privoxy.org/user-manual/</screen>
</para>
</listitem>
</varlistentry>
</sect3>
-<!-- ~~~~~ New section ~~~~~ -->
-<sect3 renderas="sect4" id="send-wafer">
-<title>send-wafer</title>
-
-<variablelist>
- <varlistentry>
- <term>Typical use:</term>
- <listitem>
- <para>
- Send custom cookies or feed log analysis scripts with even more useless data.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Effect:</term>
- <listitem>
- <para>
- Sends a custom, user-defined cookie with each request.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Type:</term>
- <!-- Boolean, Parameterized, Multi-value -->
- <listitem>
- <para>Multi-value.</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Parameter:</term>
- <listitem>
- <para>
- A string of the form <quote><replaceable class="option">name</replaceable>=<replaceable
- class="parameter">value</replaceable></quote>.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Notes:</term>
- <listitem>
- <para>
- Being multi-valued, multiple instances of this action can apply to the same request,
- resulting in multiple cookies being sent.
- </para>
- <para>
- This action is rarely used and not enabled in the default configuration.
- </para>
- </listitem>
- </varlistentry>
- <varlistentry>
- <term>Example usage (section):</term>
- <listitem>
- <para>
- <screen>{+send-wafer{UsingPrivoxy=true}}
-my-internal-testing-server.void</screen>
- </para>
- </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
<!-- ~~~~~ New section ~~~~~ -->
<sect3 renderas="sect4" id="server-header-filter">
<title>server-header-filter</title>
<term>Typical use:</term>
<listitem>
<para>
- Disable or disable filters based on the Content-Type header.
+ Enable or disable filters based on the Content-Type header.
</para>
</listitem>
</varlistentry>
<listitem>
<para>
<screen>
-# Tag every request with the declared content type
-{+client-header-filter{content-type}}
+# Tag every request with the content type declared by the server
+{+server-header-tagger{content-type}}
/
</screen>
</para>
</sect3>
-<!-- ~~~~~ New section ~~~~~ -->
-<sect3 renderas="sect4" id="treat-forbidden-connects-like-blocks">
-<title>treat-forbidden-connects-like-blocks</title>
-<!--
-new action
--->
-<variablelist>
- <varlistentry>
- <term>Typical use:</term>
- <listitem>
- <para>Block forbidden connects with an easy to find error message.</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Effect:</term>
- <listitem>
- <para>
- If this action is enabled, <application>Privoxy</application> no longer
- makes a difference between forbidden connects and ordinary blocks.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Type:</term>
- <!-- Boolean, Parameterized, Multi-value -->
- <listitem>
- <para>Boolean</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Parameter:</term>
- <listitem>
- <para>N/A</para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Notes:</term>
- <listitem>
- <para>
- By default <application>Privoxy</application> answers
- <link linkend="limit-connect">forbidden <quote>Connect</quote> requests</link>
- with a short error message inside the headers. If the browser doesn't display
- headers (most don't), you just see an empty page.
- </para>
- <para>
- With this action enabled, <application>Privoxy</application> displays
- the message that is used for ordinary blocks instead. If you decide
- to make an exception for the page in question, you can do so by
- following the <quote>See why</quote> link.
- </para>
- <para>
- For <quote>Connect</quote> requests the clients tell
- <application>Privoxy</application> which host they are interested
- in, but not which document they plan to get later. As a result, the
- <quote>Go there anyway</quote> wouldn't work and is therefore suppressed.
- </para>
- </listitem>
- </varlistentry>
-
- <varlistentry>
- <term>Example usage:</term>
- <listitem>
- <para>
- <screen>+treat-forbidden-connects-like-blocks</screen>
- </para>
- </listitem>
- </varlistentry>
-</variablelist>
-</sect3>
-
-
<!-- ~~~~~ New section ~~~~~ -->
<sect3>
<title>Summary</title>
#
+crunch-all-cookies = +<link linkend="CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies</link> +<link linkend="CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</link>
-crunch-all-cookies = -<link linkend="CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies</link> -<link linkend="CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</link>
- +block-as-image = +block +handle-as-image
+ +block-as-image = +block{Blocked image.} +handle-as-image
allow-all-cookies = -crunch-all-cookies -<link linkend="SESSION-COOKIES-ONLY">session-cookies-only</link> -<link linkend="FILTER-CONTENT-COOKIES">filter{content-cookies}</link>
# These aliases define combinations of actions
# that are useful for certain types of sites:
#
- fragile = -<link linkend="BLOCK">block</link> -<link linkend="FILTER">filter</link> -crunch-all-cookies -<link linkend="FAST-REDIRECTS">fast-redirects</link> -<link linkend="HIDE-REFERER">hide-referrer</link> -<link linkend="KILL-POPUPS">kill-popups</link> -<link linkend="PREVENT-COMPRESSION">prevent-compression</link>
+ fragile = -<link linkend="BLOCK">block</link> -<link linkend="FILTER">filter</link> -crunch-all-cookies -<link linkend="FAST-REDIRECTS">fast-redirects</link> -<link linkend="HIDE-REFERER">hide-referrer</link> -<link linkend="PREVENT-COMPRESSION">prevent-compression</link>
- shop = -crunch-all-cookies -<link linkend="FILTER-ALL-POPUPS">filter{all-popups}</link> -<link linkend="KILL-POPUPS">kill-popups</link>
+ shop = -crunch-all-cookies -<link linkend="FILTER-ALL-POPUPS">filter{all-popups}</link>
# Short names for other aliases, for really lazy people ;-)
#
# These shops require pop-ups:
#
- {-kill-popups -filter{all-popups} -filter{unsolicited-popups}}
+ {-filter{all-popups} -filter{unsolicited-popups}}
.dabs.com
.overclockers.co.uk</screen>
</para>
#
+crunch-all-cookies = +<link linkend="CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies</link> +<link linkend="CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</link>
-crunch-all-cookies = -<link linkend="CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies</link> -<link linkend="CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</link>
- +block-as-image = +block +handle-as-image
+ +block-as-image = +block{Blocked image.} +handle-as-image
mercy-for-cookies = -crunch-all-cookies -<link linkend="SESSION-COOKIES-ONLY">session-cookies-only</link> -<link linkend="FILTER-CONTENT-COOKIES">filter{content-cookies}</link>
# These aliases define combinations of actions
# that are useful for certain types of sites:
#
- fragile = -<link linkend="BLOCK">block</link> -<link linkend="FILTER">filter</link> -crunch-all-cookies -<link linkend="FAST-REDIRECTS">fast-redirects</link> -<link linkend="HIDE-REFERER">hide-referrer</link> -<link linkend="KILL-POPUPS">kill-popups</link>
- shop = -crunch-all-cookies -<link linkend="FILTER-ALL-POPUPS">filter{all-popups}</link> -<link linkend="KILL-POPUPS">kill-popups</link></screen>
+ fragile = -<link linkend="BLOCK">block</link> -<link linkend="FILTER">filter</link> -crunch-all-cookies -<link linkend="FAST-REDIRECTS">fast-redirects</link> -<link linkend="HIDE-REFERER">hide-referrer</link>
+ shop = -crunch-all-cookies -<link linkend="FILTER-ALL-POPUPS">filter{all-popups}</link></screen>
</para>
<para>
<para>
Again, at the start of matching, all actions are disabled, so there is
- no real need to disable any actions here, but we will do that nonetheless,
- to have a complete listing for your reference. (Remember: a <quote>+</quote>
+ no need to disable any actions here. (Remember: a <quote>+</quote>
preceding the action name enables the action, a <quote>-</quote> disables!).
Also note how this long line has been made more readable by splitting it into
multiple lines with line continuation.
# "Defaults" section:
##########################################################################
{ \
- -<link linkend="ADD-HEADER">add-header</link> \
- -<link linkend="CLIENT-HEADER-FILTER">client-header-filter{hide-tor-exit-notation}</link> \
- -<link linkend="BLOCK">block</link> \
- -<link linkend="CONTENT-TYPE-OVERWRITE">content-type-overwrite</link> \
- -<link linkend="CRUNCH-CLIENT-HEADER">crunch-client-header</link> \
- -<link linkend="CRUNCH-IF-NONE-MATCH">crunch-if-none-match</link> \
- -<link linkend="CRUNCH-INCOMING-COOKIES">crunch-incoming-cookies</link> \
- -<link linkend="CRUNCH-SERVER-HEADER">crunch-server-header</link> \
- -<link linkend="CRUNCH-OUTGOING-COOKIES">crunch-outgoing-cookies</link> \
+<link linkend="DEANIMATE-GIFS">deanimate-gifs</link> \
- -<link linkend="DOWNGRADE-HTTP-VERSION">downgrade-http-version</link> \
- -<link linkend="FAST-REDIRECTS">fast-redirects{check-decoded-url}</link> \
- -<link linkend="FILTER-JS-ANNOYANCES">filter{js-annoyances}</link> \
- -<link linkend="FILTER-JS-EVENTS">filter{js-events}</link> \
+<link linkend="FILTER-HTML-ANNOYANCES">filter{html-annoyances}</link> \
- -<link linkend="FILTER-CONTENT-COOKIES">filter{content-cookies}</link> \
+<link linkend="FILTER-REFRESH-TAGS">filter{refresh-tags}</link> \
- -<link linkend="FILTER-UNSOLICITED-POPUPS">filter{unsolicited-popups}</link> \
- -<link linkend="FILTER-ALL-POPUPS">filter{all-popups}</link> \
- -<link linkend="FILTER-IMG-REORDER">filter{img-reorder}</link> \
- -<link linkend="FILTER-BANNERS-BY-SIZE">filter{banners-by-size}</link> \
- -<link linkend="FILTER-BANNERS-BY-LINK">filter{banners-by-link}</link> \
+<link linkend="FILTER-WEBBUGS">filter{webbugs}</link> \
- -<link linkend="FILTER-TINY-TEXTFORMS">filter{tiny-textforms}</link> \
- -<link linkend="FILTER-JUMPING-WINDOWS">filter{jumping-windows}</link> \
- -<link linkend="FILTER-FRAMESET-BORDERS">filter{frameset-borders}</link> \
- -<link linkend="FILTER-DEMORONIZER">filter{demoronizer}</link> \
- -<link linkend="FILTER-SHOCKWAVE-FLASH">filter{shockwave-flash}</link> \
- -<link linkend="FILTER-QUICKTIME-KIOSKMODE">filter{quicktime-kioskmode}</link> \
- -<link linkend="FILTER-FUN">filter{fun}</link> \
- -<link linkend="FILTER-CRUDE-PARENTAL">filter{crude-parental}</link> \
+<link linkend="FILTER-IE-EXPLOITS">filter{ie-exploits}</link> \
- -<link linkend="FILTER-GOOGLE">filter{google}</link> \
- -<link linkend="FILTER-YAHOO">filter{yahoo}</link> \
- -<link linkend="FILTER-MSN">filter{msn}</link> \
- -<link linkend="FILTER-BLOGSPOT">filter{blogspot}</link> \
- -<link linkend="FILTER-NO-PING">filter{no-ping}</link> \
- -<link linkend="FORCE-TEXT-MODE">force-text-mode</link> \
- -<link linkend="HANDLE-AS-EMPTY-DOCUMENT">handle-as-empty-document</link> \
- -<link linkend="HANDLE-AS-IMAGE">handle-as-image</link> \
- -<link linkend="HIDE-ACCEPT-LANGUAGE">hide-accept-language</link> \
- -<link linkend="HIDE-CONTENT-DISPOSITION">hide-content-disposition</link> \
- -<link linkend="HIDE-IF-MODIFIED-SINCE">hide-if-modified-since</link> \
+<link linkend="HIDE-FORWARDED-FOR-HEADERS">hide-forwarded-for-headers</link> \
+<link linkend="HIDE-FROM-HEADER">hide-from-header{block}</link> \
+<link linkend="HIDE-REFERER">hide-referrer{forge}</link> \
- -<link linkend="HIDE-USER-AGENT">hide-user-agent</link> \
- -<link linkend="INSPECT-JPEGS">inspect-jpegs</link> \
- -<link linkend="KILL-POPUPS">kill-popups</link> \
- -<link linkend="LIMIT-CONNECT">limit-connect</link> \
+<link linkend="PREVENT-COMPRESSION">prevent-compression</link> \
- -<link linkend="OVERWRITE-LAST-MODIFIED">overwrite-last-modified</link> \
- -<link linkend="REDIRECT">redirect</link> \
- -<link linkend="SEND-VANILLA-WAFER">send-vanilla-wafer</link> \
- -<link linkend="SEND-WAFER">send-wafer</link> \
- -<link linkend="SERVER-HEADER-FILTER">server-header-filter{xml-to-html}</link> \
- -<link linkend="SERVER-HEADER-FILTER">server-header-filter{html-to-xml}</link> \
+<link linkend="SESSION-COOKIES-ONLY">session-cookies-only</link> \
+<link linkend="SET-IMAGE-BLOCKER">set-image-blocker{pattern}</link> \
- -<link linkend="TREAT-FORBIDDEN-CONNECTS-LIKE-BLOCKS">treat-forbidden-connects-like-blocks</link> \
}
/ # forward slash will match *all* potential URL patterns.</screen>
</para>
<para>
- The default behavior is now set. Note that some actions, like not hiding
+ The default behavior is now set.
+ <!--
+ This needs rewording, but it can wait for now.
+ fk 2007-11-17
+
+ Note that some actions, like not hiding
the user agent, are part of a <quote>general policy</quote> that applies
universally and won't get any exceptions defined later. Other choices,
like not blocking (which is <emphasis>understandably</emphasis> the
default!) need exceptions, i.e. we need to specify explicitly what we
want to block in later sections.
+ -->
</para>
<para>
now. <ulink url="http://www.mozilla.org/">Mozilla</ulink> users, who
can turn on smart handling of unwanted pop-ups in their browsers, can
safely choose
- -<literal><link linkend="FILTER-ALL-POPUPS">filter{popups}</link></literal> (and
- -<literal><link linkend="KILL-POPUPS">kill-popups</link></literal>) above
+ -<literal><link linkend="FILTER-ALL-POPUPS">filter{popups}</link></literal> above
and hence don't need this section. Anyway, disabling an already disabled
action doesn't hurt, so we'll define our exceptions regardless of what was
chosen in the defaults section:
<screen>
# These sites require pop-ups too :(
#
-{ -<link linkend="KILL-POPUPS">kill-popups</link> -<link linkend="FILTER-ALL-POPUPS">filter{popups}</link> }
+{ -<link linkend="FILTER-ALL-POPUPS">filter{popups}</link> }
.dabs.com
.overclockers.co.uk
.deutsche-bank-24.de</screen>
##########################################################################
# Block these fine banners:
##########################################################################
-{ <link linkend="BLOCK">+block</link> }
+{ <link linkend="BLOCK">+block{Banner ads.}</link> }
# Generic patterns:
#
<para>
<screen>
-# My user.action file. <fred@foobar.com></screen>
+# My user.action file. <fred@example.com></screen>
</para>
<para>
+crunch-all-cookies = +crunch-incoming-cookies +crunch-outgoing-cookies
-crunch-all-cookies = -crunch-incoming-cookies -crunch-outgoing-cookies
allow-all-cookies = -crunch-all-cookies -session-cookies-only
- allow-popups = -filter{all-popups} -kill-popups
-+block-as-image = +block +handle-as-image
+ allow-popups = -filter{all-popups}
++block-as-image = +block{Blocked as image.} +handle-as-image
-block-as-image = -block
# These aliases define combinations of actions that are useful for
# certain types of sites:
#
-fragile = -block -crunch-all-cookies -filter -fast-redirects -hide-referrer -kill-popups
+fragile = -block -crunch-all-cookies -filter -fast-redirects -hide-referrer
shop = -crunch-all-cookies allow-popups
# Allow ads for selected useful free sites:
seen an ad on your favourite page on example.com that you want to get rid of.
You have right-clicked the image, selected <quote>copy image location</quote>
and pasted the URL below while removing the leading http://, into a
- <literal>{ +block }</literal> section. Note that <literal>{ +handle-as-image
+ <literal>{ +block{} }</literal> section. Note that <literal>{ +handle-as-image
}</literal> need not be specified, since all URLs ending in
<literal>.gif</literal> will be tagged as images by the general rules as set
in default.action anyway:
<para>
<screen>
-{ +<link linkend="BLOCK">block</link> }
+{ +<link linkend="BLOCK">block</link>{Nasty ads.} }
www.example.com/nasty-ads/sponsor\.gif
- another.popular.site.net/more/junk/here/</screen>
+ another.example.net/more/junk/here/</screen>
</para>
<para>
<para>
You like the <quote>fun</quote> text replacements in <filename>default.filter</filename>,
- but it is disabled in the distributed actions file. (My colleagues on the team just
- don't have a sense of humour, that's why! ;-). So you'd like to turn it on in your private,
+ but it is disabled in the distributed actions file.
+ So you'd like to turn it on in your private,
update-safe config, once and for all:
</para>
<literal><link linkend="client-header-filter">client-header-filter</link></literal>
to rewrite headers that are send by the client, and
<literal><link linkend="server-header-filter">server-header-filter</link></literal>
- to rewrite headers that are send by the server, and
+ to rewrite headers that are send by the server.
</para>
<para>
<literal><link linkend="client-header-tagger">client-header-tagger</link></literal>
and
<literal><link linkend="server-header-tagger">server-header-tagger</link></literal>.
- Taggers and filters use the same syntax in the filter files, the differnce
+ Taggers and filters use the same syntax in the filter files, the difference
is that taggers don't modify the text they are filtering, but use a rewritten
version of the filtered text as tag. The tags can then be used to change the
applying actions through sections with <link linkend="tag-pattern">tag-patterns</link>.
<para>
Multiple filter files can be defined through the <literal> <link
linkend="filterfile">filterfile</link></literal> config directive. The filters
- as supplied by the developers will be found in
+ as supplied by the developers are located in
<filename>default.filter</filename>. It is recommended that any locally
defined or modified filters go in a separately defined file such as
<filename>user.filter</filename>.
-
-</para>
+ </para>
<para>
- Command tasks for content filters are to eliminate common annoyances in
+ Common tasks for content filters are to eliminate common annoyances in
HTML and JavaScript, such as pop-up windows,
exit consoles, crippled windows without navigation tools, the
infamous <BLINK> tag etc, to suppress images with certain
</para>
<para>
- Content filtering works on any text-based document type, including
- HTML, JavaScript, CSS etc. (all <literal>text/*</literal>
- MIME types, <emphasis>except</emphasis> <literal>text/plain</literal>).
+ Enabled content filters are applied to any content whose
+ <quote>Content Type</quote> header is recognised as a sign
+ of text-based content, with the exception of <literal>text/plain</literal>.
+ Use the <link linkend="FORCE-TEXT-MODE">force-text-mode</link> action
+ to also filter other content.
+</para>
+
+<para>
Substitutions are made at the source level, so if you want to <quote>roll
your own</quote> filters, you should first be familiar with HTML syntax,
and, of course, regular expressions.
<para>
The templates are basically normal HTML files, but with place-holders (called symbols
- or exports), which <application>Privoxy</application> fills at run time. You can
- edit the templates with a normal text editor, should you want to customize them.
- (<emphasis>Not recommended for the casual user</emphasis>). Note that
- just like in configuration files, lines starting with <literal>#</literal> are
- ignored when the templates are filled in.
+ or exports), which <application>Privoxy</application> fills at run time. It
+ is possible to edit the templates with a normal text editor, should you want
+ to customize them. (<emphasis>Not recommended for the casual
+ user</emphasis>). Should you create your own custom templates, you should use
+ the <filename>config</filename> setting <link linkend="templdir">templdir</link>
+ to specify an alternate location, so your templates do not get overwritten
+ during upgrades.
+ </para>
+ <para>
+ Note that just like in configuration files, lines starting
+ with <literal>#</literal> are ignored when the templates are filled in.
</para>
<para>
<listitem>
<para>
- Toggle Privoxy on or off. In this case, <quote>Privoxy</quote> continues
- to run, but only as a pass-through proxy, with no actions taking place:
+ Toggle Privoxy on or off. This feature can be turned off/on in the main
+ <filename>config</filename> file. When toggled <quote>off</quote>, <quote>Privoxy</quote>
+ continues to run, but only as a pass-through proxy, with no actions taking
+ place:
</para>
<blockquote>
<para>
actions.
</para>
</listitem>
- <listitem>
- <para>
- If the <link linkend="KILL-POPUPS"><quote>+kill-popups</quote></link>
- action applies, and it is an HTML or JavaScript document, the popup-code in the
- response is filtered on-the-fly as it is received.
- </para>
- </listitem>
<listitem>
<para>
If any <link linkend="FILTER"><quote>+filter</quote></link> action
or not, is to disable it temporarily. This should be the first troubleshooting
step. See <link linkend="bookmarklets">the Bookmarklets</link> section on a quick
and easy way to do this (be sure to flush caches afterward!). Looking at the
- logs is a good idea too.
+ logs is a good idea too. (Note that both the toggle feature and logging are
+ enabled via <filename>config</filename> file settings, and may need to be
+ turned <quote>on</quote>.)
</para>
<para>
Another easy troubleshooting step to try is if you have done any
-hide-if-modified-since
+hide-referrer {forge}
-hide-user-agent
- -inspect-jpegs
- -kill-popups
-limit-connect
-overwrite-last-modified
-prevent-compression
-redirect
- -send-vanilla-wafer
- -send-wafer
-server-header-filter{xml-to-html}
-server-header-filter{html-to-xml}
-session-cookies-only
- +set-image-blocker {pattern}
- -treat-forbidden-connects-like-blocks </screen>
+ +set-image-blocker {pattern} </screen>
</para>
<para>
<para>
<screen>
- { +block }
+ { +block{Domains starts with "ad"} }
ad*.
- { +block }
+ { +block{Domain contains "ad"} }
.ad.
- { +block +handle-as-image }
+ { +block{Doubleclick banner server} +handle-as-image }
.[a-vx-z]*.doubleclick.net
</screen>
</para>
<para>
We'll just show the interesting part here - the explicit matches. It is
- matched three different times. Two <quote>+block</quote> sections,
- and a <quote>+block +handle-as-image</quote>,
+ matched three different times. Two <quote>+block{}</quote> sections,
+ and a <quote>+block{} +handle-as-image</quote>,
which is the expanded form of one of our aliases that had been defined as:
<quote>+block-as-image</quote>. (<link
linkend="ALIASES"><quote>Aliases</quote></link> are defined in
though ;-) Note that if you want an ad or obnoxious
URL to be invisible, it should be defined as <quote>ad.doubleclick.net</quote>
is done here -- as both a <link
- linkend="BLOCK"><quote>+block</quote></link>
+ linkend="BLOCK"><quote>+block{}</quote></link>
<emphasis>and</emphasis> an
<link linkend="HANDLE-AS-IMAGE"><quote>+handle-as-image</quote></link>.
The custom alias <quote><literal>+block-as-image</literal></quote> just
+hide-from-header{block}
+hide-referer{forge}
-hide-user-agent
- -inspect-jpegs
- -kill-popups
-overwrite-last-modified
+prevent-compression
-redirect
- -send-vanilla-wafer
- -send-wafer
-server-header-filter{xml-to-html}
-server-header-filter{html-to-xml}
+session-cookies-only
- +set-image-blocker{blank}
- -treat-forbidden-connects-like-blocks }
+ +set-image-blocker{blank} }
/
- { +block +handle-as-image }
+ { +block{Path contains "ads".} +handle-as-image }
/ads
</screen>
</para>
<para>
<screen>
- { +block +handle-as-image }
+ { +block{Path starts with "ads".} +handle-as-image }
/ads
</screen>
</para>
<para>
<emphasis>Remember to flush caches!</emphasis> Note that the
<literal>mail.google</literal> reference lacks the TLD portion (e.g.
- <quote>.com</quote>. This will effectively match any TLD with
- <literal>google</literal> in it, such as <literal>mail.google.de</literal>,
+ <quote>.com</quote>). This will effectively match any TLD with
+ <literal>google</literal> in it, such as <literal>mail.google.de.</literal>,
just as an example.
</para>
<para>
USA
$Log: user-manual.sgml,v $
+ Revision 2.80 2008/07/18 16:54:30 fabiankeil
+ Remove erroneous whitespace in documentation link.
+ Reported by John Chronister in #2021611.
+
+ Revision 2.79 2008/06/27 18:00:53 markm68k
+ remove outdated startup information for mac os x
+
+ Revision 2.78 2008/06/21 17:03:03 fabiankeil
+ Fix typo.
+
+ Revision 2.77 2008/06/14 13:45:22 fabiankeil
+ Re-add a colon I unintentionally removed a few revisions ago.
+
+ Revision 2.76 2008/06/14 13:21:28 fabiankeil
+ Prepare for the upcoming 3.0.9 beta release.
+
+ Revision 2.75 2008/06/13 16:06:48 fabiankeil
+ Update the "What's New in this Release" section with
+ the ChangeLog entries changelog2doc.pl could handle.
+
+ Revision 2.74 2008/05/26 15:55:46 fabiankeil
+ - Update "default profiles" table.
+ - Add some more pcrs redirect examples and note that
+ enabling debug 128 helps to get redirects working.
+
+ Revision 2.73 2008/05/23 14:43:18 fabiankeil
+ Remove previously out-commented block that caused syntax problems.
+
+ Revision 2.72 2008/05/12 10:26:14 fabiankeil
+ Synchronize content filter descriptions with the ones in default.filter.
+
+ Revision 2.71 2008/04/10 17:37:16 fabiankeil
+ Actually we use "modern" POSIX 1003.2 regular
+ expressions in path patterns, not PCRE.
+
+ Revision 2.70 2008/04/10 15:59:12 fabiankeil
+ Add another section to the client-header-tagger example that shows
+ how to actually change the action settings once the tag is created.
+
+ Revision 2.69 2008/03/29 12:14:25 fabiankeil
+ Remove send-wafer and send-vanilla-wafer actions.
+
+ Revision 2.68 2008/03/28 15:13:43 fabiankeil
+ Remove inspect-jpegs action.
+
+ Revision 2.67 2008/03/27 18:31:21 fabiankeil
+ Remove kill-popups action.
+
+ Revision 2.66 2008/03/06 16:33:47 fabiankeil
+ If limit-connect isn't used, don't limit CONNECT requests to port 443.
+
+ Revision 2.65 2008/03/04 18:30:40 fabiankeil
+ Remove the treat-forbidden-connects-like-blocks action. We now
+ use the "blocked" page for forbidden CONNECT requests by default.
+
+ Revision 2.64 2008/03/01 14:10:28 fabiankeil
+ Use new block syntax. Still needs some polishing.
+
+ Revision 2.63 2008/02/22 05:50:37 markm68k
+ fix merge problem
+
+ Revision 2.62 2008/02/11 11:52:23 hal9
+ Fix entity ... s/&/&
+
+ Revision 2.61 2008/02/11 03:41:47 markm68k
+ more updates for mac os x
+
+ Revision 2.60 2008/02/11 03:40:25 markm68k
+ more updates for mac os x
+
+ Revision 2.59 2008/02/11 00:52:34 markm68k
+ reflect new changes for mac os x
+
+ Revision 2.58 2008/02/03 21:37:40 hal9
+ Apply patch from Mark: s/OSX/OS X/
+
+ Revision 2.57 2008/02/03 19:10:14 fabiankeil
+ Mention forward-socks5.
+
+ Revision 2.56 2008/01/31 19:11:35 fabiankeil
+ Let the +client-header-filter{hide-tor-exit-notation} example apply
+ to all requests as "tainted" Referers aren't limited to exit TLDs.
+
+ Revision 2.55 2008/01/19 21:26:37 hal9
+ Add IE7 to configuration section per Gerry.
+
+ Revision 2.54 2008/01/19 17:52:39 hal9
+ Re-commit to fix various minor issues for new release.
+
+ Revision 2.53 2008/01/19 15:03:05 hal9
+ Doc sources tagged for 3.0.8 release.
+
+ Revision 2.52 2008/01/17 01:49:51 hal9
+ Change copyright notice for docs s/2007/2008/. All these will be rebuilt soon
+ enough.
+
+ Revision 2.51 2007/12/23 16:48:24 fabiankeil
+ Use more precise example descriptions for the mysterious domain patterns.
+
+ Revision 2.50 2007/12/08 12:44:36 fabiankeil
+ - Remove already commented out pre-3.0.7 changes.
+ - Update the "new log defaults" paragraph.
+
+ Revision 2.49 2007/12/06 18:21:55 fabiankeil
+ Update hide-forwarded-for-headers description.
+
+ Revision 2.48 2007/11/24 19:07:17 fabiankeil
+ - Mention request rewriting.
+ - Enable the conditional-forge paragraph.
+ - Minor rewordings.
+
+ Revision 2.47 2007/11/18 14:59:47 fabiankeil
+ A few "Note to Upgraders" updates.
+
+ Revision 2.46 2007/11/17 17:24:44 fabiankeil
+ - Use new action defaults.
+ - Minor fixes and rewordings.
+
+ Revision 2.45 2007/11/16 11:48:46 hal9
+ Fix one typo, and add a couple of small refinements.
+
+ Revision 2.44 2007/11/15 03:30:20 hal9
+ Results of spell check.
+
+ Revision 2.43 2007/11/14 18:45:39 fabiankeil
+ - Mention some more contributors in the "New in this Release" list.
+ - Minor rewordings.
+
+ Revision 2.42 2007/11/12 03:32:40 hal9
+ Updates for "What's New" and "Notes to Upgraders". Various other changes in
+ preparation for new release. User Manual is almost ready.
+
+ Revision 2.41 2007/11/11 16:32:11 hal9
+ This is primarily syncing What's New and Note to Upgraders sections with the many
+ new features and changes (gleaned from memory but mostly from ChangeLog).
+
+ Revision 2.40 2007/11/10 17:10:59 fabiankeil
+ In the first third of the file, mention several times that
+ the action editor is disabled by default in 3.0.7 beta and later.
+
+ Revision 2.39 2007/11/05 02:34:49 hal9
+ Various changes in preparation for the upcoming release. Much yet to be done.
+
+ Revision 2.38 2007/09/22 16:01:42 fabiankeil
+ Update embedded show-url-info output.
+
Revision 2.37 2007/08/27 16:09:55 fabiankeil
- Fix --pre-chroot-nslookup description which I failed to
+ Fix pre-chroot-nslookup description which I failed to
copy and paste properly. Reported by Stephen Gildea.
Revision 2.36 2007/08/26 16:47:14 fabiankeil
- Add Stephen Gildea's --pre-chroot-nslookup patch [#1276666],
+ Add Stephen Gildea's pre-chroot-nslookup patch [#1276666],
extensive comments moved to user manual.
Revision 2.35 2007/08/26 14:59:49 fabiankeil
Spell checked (only one typo this time!).
Revision 1.123.2.16 2002/08/09 19:20:54 david__schmidt
- Update to Mac OSX startup script name
+ Update to Mac OS X startup script name
Revision 1.123.2.15 2002/08/07 17:32:11 oes
Converted some internal links from ulink to link for PDF creation; no content changed
Revision 1.123.2.9 2002/07/11 03:40:28 david__schmidt
- Updated Mac OSX sections due to installation location change
+ Updated Mac OS X sections due to installation location change
Revision 1.123.2.8 2002/06/09 16:36:32 hal9
Clarifications on filtering and MIME. Hardcode 'latest release' in index.html.
Ooops missed something from David.
Revision 1.123.2.3 2002/05/27 03:23:17 hal9
- Fix FIXMEs for OS2 and OSX startup. Fix Redhat typos (should be Red Hat).
+ Fix FIXMEs for OS2 and Mac OS X startup. Fix Redhat typos (should be Red Hat).
That's a wrap, I think.
Revision 1.123.2.2 2002/05/26 19:02:09 hal9
Add AmigaOS install stuff.
Revision 1.87 2002/04/23 02:53:15 david__schmidt
- Updated OSX installation section
+ Updated Mac OS X installation section
Added a few English tweaks here an there
Revision 1.86 2002/04/21 01:46:32 hal9
projects / privoxy.git / blobdiff