-<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V3.1//EN">
+<!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook V3.1//EN" [
+<!entity % dummy "INCLUDE">
+<!entity supported SYSTEM "supported.sgml">
+<!entity newfeatures SYSTEM "newfeatures.sgml">
+<!entity p-intro SYSTEM "privoxy.sgml">
+<!entity seealso SYSTEM "seealso.sgml">
+<!entity buildsource SYSTEM "buildsource.sgml">
+<!entity contacting SYSTEM "contacting.sgml">
+<!entity history SYSTEM "history.sgml">
+<!entity copyright SYSTEM "copyright.sgml">
+<!entity p-version "2.9.13">
+<!entity p-status "BETA">
+<!entity % p-not-stable "INCLUDE"> <!-- set to IGNORE for stable release -->
+<!entity % p-stable "IGNORE"> <!-- set INCLUDE for stable release -->
+<!entity % p-text "IGNORE"> <!-- define we are not a text only doc -->
+<!entity % p-doc "INCLUDE"> <!-- and we are a formal doc -->
+<!entity % p-readme "IGNORE">
+<!entity % p-supp-userman "IGNORE"> <!-- Omit some from supported.sgml -->
+]>
<!--
File : $Source: /cvsroot/ijbswa/current/doc/source/user-manual.sgml,v $
This file belongs into
ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/
- $Id: user-manual.sgml,v 1.58 2002/03/26 22:29:55 swa Exp $
+ $Id: user-manual.sgml,v 1.68 2002/04/04 18:46:47 swa Exp $
Written by and Copyright (C) 2001 the SourceForge
Privoxy team. http://www.privoxy.org/
Based on the Internet Junkbuster originally written
by and Copyright (C) 1997 Anonymous Coders and
Junkbusters Corporation. http://www.junkbusters.com
--->
-<!--
-Sat 03/02/02 04:53:47 PM
-This should be ready for BETA release.
+ ========================================================================
+ NOTE: Please read developer-manual/documentation.html before touching
+ anything in this, or other Privoxy documentation. You have been warned!
+ Failure to abide by this rule will result in the revocation of your license
+ to live a peaceful existence!
+ ========================================================================
-Hal Burgiss <hal@foobox.net>
-->
<article id="index">
<artheader>
<title>Privoxy User Manual</title>
-<pubdate>$Id: user-manual.sgml,v 1.58 2002/03/26 22:29:55 swa Exp $</pubdate>
+<pubdate>$Id: user-manual.sgml,v 1.68 2002/04/04 18:46:47 swa Exp $</pubdate>
<authorgroup>
<author>
</authorgroup>
<abstract>
+<![%dummy;[
<para>
- The user manual gives users information on how to install, configure and use
- <application>Privoxy</application>. <application>Privoxy</application> is a
- web proxy with advanced filtering capabilities for protecting privacy,
- filtering web page content, managing cookies, controlling access, and
- removing ads, banners, pop-ups and other obnoxious Internet
- Junk. <application>Privoxy</application> has a very flexible configuration
- and can be customized to suit individual needs and
- tastes. <application>Privoxy</application> has application for both
- stand-alone systems and multi-user networks.
+ <comment>
+ This is here to keep vim syntax file from breaking :/
+ If I knew enough to fix it, I would.
+ PLEASE DO NOT REMOVE! HB: hal@foobox.net
+ </comment>
</para>
+]]>
+
<para>
-You can find the latest version of the user manual at <ulink url="http://www.privoxy.org/user-manual/">http://www.privoxy.org/user-manual/</ulink>.
- </para>
+ The user manual gives users information on how to install, configure and use
+ <application>Privoxy</application>.
+ </para>
+
+<!--
+ Include privoxy.sgml boilerplate:
+-->
+ &p-intro;
+
+ <para>
+ You can find the latest version of the user manual at <ulink
+ url="http://www.privoxy.org/user-manual/">http://www.privoxy.org/user-manual/</ulink>. Please see the Contact section on how to contact the developers.
+ </para>
<!-- <para> -->
<!-- Feel free to send a note to the developers at <email>ijbswa-developers@lists.sourceforge.net</email>. -->
</artheader>
-
<!-- ~~~~~ New section ~~~~~ -->
+<sect1 id="intro" label=""><title></title>
+<!-- dummy section to force TOC on page by itself -->
+<!-- DO NOT REMOVE! please ;) -->
+<para> </para>
+</sect1>
-<sect1 id="introduction"><title>Introduction</title>
-<para>
- <application>Privoxy</application> is a web proxy with advanced filtering
- capabilities for protecting privacy, filtering web page content, managing
- cookies, controlling access, and removing ads, banners, pop-ups and other
- obnoxious Internet junk. <application>Privoxy</application> has a very
- flexible configuration and can be customized to suit individual needs and
- tastes. <application>Privoxy</application> has application for both
- stand-alone systems and multi-user networks.
-</para>
-
-<para>
- <application>Privoxy</application> is based on the code of the
- <application>Internet Junkbuster</application>.
- <application>Junkbuster</application> was originally written by JunkBusters
- Corporation, and was released as free open-source software under the GNU GPL.
- Stefan Waldherr made many improvements, and started the SourceForge project
- to continue development.
-</para>
+<!-- ~~~~~ New section ~~~~~ -->
-<para>
- <application>Privoxy</application> continues the
- <application>Junkbuster</application> tradition, but adds many
- refinements and enhancements.
-</para>
+<sect1 label="1" id="introduction"><title>Introduction</title>
<para>
- This documentation is included with the current BETA version of
- <application>Privoxy</application> and is mostly complete at this
- point. The most up to date reference for the time being is still the comments
- in the source files and in the individual configuration files. Development
- of version 3.0 is currently nearing completion, and includes many significant
- changes and enhancements over earlier versions. The target release date for
- stable v3.0 is <quote>soon</quote> ;-)
+ This documentation is included with the current &p-status; version of
+ <application>Privoxy</application>, v.&p-version;<![%p-not-stable;[,
+ and is mostly complete at this point. The most up to date reference for the
+ time being is still the comments in the source files and in the individual
+ configuration files. Development of version 3.0 is currently nearing
+ completion, and includes many significant changes and enhancements over
+ earlier versions. The target release date for
+ stable v3.0 is <quote>soon</quote> ;-)]]>.
</para>
+<![%p-not-stable;[
+<!-- include only in non-stable versions -->
<para>
- Since this is a BETA version, not all new features are well tested. This
+ Since this is a &p-status; version, not all new features are well tested. This
documentation may be slightly out of sync as a result (especially with
CVS sources). And there <emphasis>may be</emphasis> bugs, though hopefully
not many!
</para>
-
+]]>
<!-- ~~~~~ New section ~~~~~ -->
<sect2>
<para>
In addition to <application>Internet Junkbuster's</application> traditional
feature of ad and banner blocking and cookie management,
- <application>Privoxy</application> provides new features, some of them
- currently under development:
+ <application>Privoxy</application> provides new features<![%p-not-stable;[,
+ some of them currently under development]]>:
</para>
-<!--
- The section is in both user-manual and faq. Please keep in sync.
--->
-<para>
- <itemizedlist>
-
- <listitem>
- <para>
- Integrated browser based configuration and control utility (<ulink
- url="http://p.p">http://p.p</ulink>). Browser-based tracing of rule
- and filter effects.
- </para>
- </listitem>
-<!--
- <listitem>
- <para>
- Modularized configuration that will allow for system wide settings, and
- individual user settings. (not implemented yet, probably a 3.1 feature)
- </para>
- </listitem>
--->
- <listitem>
- <para>
- Blocking of annoying pop-up browser windows.
- </para>
- </listitem>
-
- <listitem>
- <para>
- HTTP/1.1 compliant (most, but not all 1.1 features are supported).
- </para>
- </listitem>
-
- <listitem>
- <para>
- Support for Perl Compatible Regular Expressions in the configuration files, and
- generally a more sophisticated and flexible configuration syntax over
- previous versions.
- </para>
- </listitem>
-
- <listitem>
- <para>
- GIF de-animation.
- </para>
- </listitem>
-
- <listitem>
- <para>
- Web page content filtering (removes banners based on size,
- invisible <quote>web-bugs</quote>, JavaScript, pop-ups, status bar abuse,
- etc.)
- </para>
- </listitem>
-
- <listitem>
- <para>
- Bypass many click-tracking scripts (avoids script redirection).
-
- </para>
- </listitem>
-
- <listitem>
- <para>
- Multi-threaded (POSIX and native threads).
- </para>
- </listitem>
-
- <listitem>
- <para>
- Auto-detection and re-reading of config file changes.
- </para>
- </listitem>
-
- <listitem>
- <para>
- User-customizable HTML templates (e.g. 404 error page).
- </para>
- </listitem>
-
- <listitem>
- <para>
- Improved cookie management features (e.g. session based cookies).
- </para>
-</listitem>
-
- <listitem>
- <para>
- Builds from source on most UNIX-like systems. Packages available for: Linux
- (RedHat, SuSE, or Debian), Windows, Sun Solaris, Mac OSX, OS/2, HP-UX 11 and AmigaOS.
-
- </para>
- </listitem>
-
- <listitem>
- <para>
- In addition, the configuration is much more powerful and versatile over-all.
- </para>
-</listitem>
-
- </itemizedlist>
-</para>
+<!-- Include newfeatures.sgml boilerplate here: -->
+ &newfeatures;
+<!-- end boilerplate -->
</sect2>
<!-- ~~~~~ New section ~~~~~ -->
<sect1 id="installation"><title>Installation</title>
<para>
- <application>Privoxy</application> is available as raw source code, or
-
pre-compiled binaries. See the <ulink
- url="http://sourceforge.net/projects/ijbswa/">Privoxy Home Page</ulink>
- for binaries and current release info. <application>Privoxy</application>
- is also available via <ulink
+ <application>Privoxy</application> is available as raw source code (tarball
+
or via CVS), or pre-compiled binaries for various platforms. See the <ulink
+ url="http://sourceforge.net/projects/ijbswa/">Privoxy Project Page</ulink> for
+ the most up to date release information.
+
<application>Privoxy</application> is also available via <ulink
url="http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/ijbswa/current/">CVS</ulink>.
- This is the recommended approach at this time. But please be aware that CVS
- is constantly changing, and it may break in mysterious ways.
+ <![%p-not-stable;[This is the recommended approach at this time.]]> But
+ please be aware that CVS is constantly changing, and it may break in
+ mysterious ways.
</para>
+<!-- Include supported.sgml boilerplate -->
+ &supported;
+<!-- end boilerplate -->
+
<!-- ~~~~~ New section ~~~~~ -->
<sect2 id="installation-source"><title>Source</title>
-<para>
- For gzipped tar archives, unpack the source:
-</para>
-<para>
- <screen>
- tar xzvf privoxy-2.9.13-beta-src* [.tgz or .tar.gz]
- cd privoxy-2.9.13-beta
- </screen>
-</para>
-<para>
- For retrieving the current CVS sources, you'll need the CVS
- package installed first. To download CVS source:
-</para>
-
-<para>
- <screen>
- cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login
- cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa co current
- cd current
- </screen>
-</para>
-
-<para>
- This will create a directory named <filename>current/</filename>, which will
- contain the source tree.
-</para>
-
-<para>
- Then, in either case, to build from tarball/CVS source:
-</para>
-
-<para>
- <screen>
- ./configure (--help to see options)
- make (the make from gnu, gmake for *BSD)
- su
- make -n install (to see where all the files will go)
- make install (to really install)
- </screen>
-</para>
+<!-- include buildsource.sgml boilerplate: -->
+ &buildsource;
+<!-- end boilerplate -->
<para>
For Redhat and SuSE Linux RPM packages, see below.
</para>
-</sect2>
-
<!-- ~~~~~ New section ~~~~~ -->
-<sect2 id="installation-rh"><title>Red Hat</title>
+<sect3 id="installation-rh"><title>Red Hat</title>
<para>
- To build Redhat RPM packages, install source as above. Then:
+ To build Redhat RPM packages from source, install source as above. Then:
</para>
<para>
</para>
<para>
- /usr/src/redhat/RPMS/i686/privoxy-2.9.11-1.i686.rpm
+ /usr/src/redhat/RPMS/i686/privoxy-&p-version;-1.i686.rpm
</para>
<para>
- /usr/src/redhat/SRPMS/privoxy-2.9.11-1.src.rpm
+ /usr/src/redhat/SRPMS/privoxy-&p-version;-1.src.rpm
</para>
<para>
<para>
<screen>
- rpm -Uvv /usr/src/redhat/RPMS/i686/privoxy-2.9.11-1.i686.rpm
+ rpm -Uvv /usr/src/redhat/RPMS/i686/privoxy-&p-version;-1.i686.rpm
</screen>
</para>
<para>
This will place the <application>Privoxy</application> configuration
files in <filename>/etc/privoxy/</filename>, and log files in
- <filename>/var/log/privoxy/</filename>.
+ <filename>/var/log/privoxy/</filename>. Run
+ <command>ckconfig privoxy on</command> to have
+ <application>Privoxy</application> start automatically during init.
+
</para>
-</sect2>
+</sect3>
<!-- ~~~~~ New section ~~~~~ -->
-<sect2 id="installation-suse"><title>SuSE</title>
+<sect3 id="installation-suse"><title>SuSE</title>
<para>
To build SuSE RPM packages, install source as above. Then:
</para>
</para>
<para>
- /usr/src/packages/RPMS/i686/privoxy-2.9.11-1.i686.rpm
+ /usr/src/packages/RPMS/i686/privoxy-&p-version;-1.i686.rpm
</para>
<para>
- /usr/src/packages/SRPMS/privoxy-2.9.11-1.src.rpm
+ /usr/src/packages/SRPMS/privoxy-&p-version;-1.src.rpm
</para>
<para>
<para>
<screen>
- rpm -Uvv /usr/src/packages/RPMS/i686/privoxy-2.9.11-1.i686.rpm
+ rpm -Uvv /usr/src/packages/RPMS/i686/privoxy-&p-version;-1.i686.rpm
</screen>
</para>
<para>
This will place the <application>Privoxy</application> configuration
files in <filename>/etc/privoxy/</filename>, and log files in
- <filename>/var/log/privoxy/</filename>.
+ <filename>/var/log/privoxy/</filename>.
</para>
-</sect2>
+</sect3>
<!-- ~~~~~ New section ~~~~~ -->
-<sect2 id="installation-os2"><title>OS/2</title>
+<sect3 id="installation-os2"><title>OS/2</title>
<!--
Thanx David Schmidt!
<application>Privoxy</application> is packaged in a WarpIN self-
installing archive. The self-installing program will be named depending
on the release version, something like:
- <filename>ijbos2_setup_1.2.3.exe</filename>. In order to install it, simply
+ <filename>privoxyos2_setup_&p-version;.exe</filename>. In order to install it, simply
run this executable or double-click on its icon and follow the WarpIN
installation panels. A shadow of the <application>Privoxy</application>
executable will be placed in your startup folder so it will start
source distribution because it differs based on platform. You will also
need a compiler.
The distribution has been created using IBM VisualAge compilers, but you
- can use any compiler you like. GCC/EMX has the disadvantage of needing
+ can use any compiler you like. GCC/EMX has the disadvantage of needing
to be single-threaded due to a limitation of EMX's implementation of the
- select() socket call.
+ <function>select()</function> socket call.
</para>
<para>
You will see this sequence laid out in <filename>os2build.cmd</filename>.
</para>
-</sect2>
+</sect3>
<!-- ~~~~~ New section ~~~~~ -->
-<sect2 id="installation-win"><title>Windows</title>
+<sect3 id="installation-win"><title>Windows</title>
<para>Click-click. (I need help on this. Not a clue here. Also for
configuration section below. HB.)
</para>
-</sect2>
+</sect3>
<!-- ~~~~~ New section ~~~~~ -->
-<sect2 id="installation-other"><title>Other</title>
+<sect3 id="installation-other"><title>Other</title>
<para>
Some quick notes on other Operating Systems.
</para>
The rest should be the same as above for Linux/Unix.
</para>
+</sect3>
+</sect2>
+
+</sect1>
+
+<!-- ~ End section ~ -->
+
+
+<!-- ~~~~~ New section ~~~~~ -->
+
+<sect1 id="quickstart"><title>Quickstart to Using <application>Privoxy</application></title>
+<para>
+ Before launching <application>Privoxy</application> for the first time, you
+ will want to configure your browser(s) to use <application>Privoxy</application>
+ as a HTTP and HTTPS proxy. The default is localhost for the proxy address,
+ and port 8118 (earlier versions used port 800). This is the one required
+ configuration that must be done!
+</para>
+
+<para>
+ With <application>Netscape</application> (and
+ <application>Mozilla</application>), this can be set under <literal>Edit
+ -> Preferences -> Advanced -> Proxies -> HTTP Proxy</literal>.
+ For <application>Internet Explorer</application>: <literal>Tools ->
+ Internet Properties -> Connections -> LAN Setting</literal>. Then,
+ check <quote>Use Proxy</quote> and fill in the appropriate info (Address:
+ localhost, Port: 8118). Include if HTTPS proxy support too.
+</para>
+
+<para>
+ After doing this, flush your browser's disk and memory caches to force a
+ re-reading of all pages and get rid of any ads that may be cached. You
+ are now ready to start enjoying the benefits of using
+ <application>Privoxy</application>.
+</para>
+
+
+<para>
+ <application>Privoxy</application> is typically started by specifying the
+ main configuration file to be used on the command line. Example Unix startup
+ command:
+</para>
+
+<para>
+ <screen>
+
+ # /usr/sbin/privoxy /etc/privoxy/config
+
+ </screen>
+</para>
+
+<para>
+ An init script is provided for SuSE and Redhat.
+</para>
+
+<para>
+ For for SuSE: <command>/etc/rc.d/privoxy start</command>
+</para>
+
+<para>
+ For RedHat: <command>/etc/rc.d/init.d/privoxy start</command>
+</para>
+
+
+<para>
+ If no configuration file is specified on the command line,
+ <application>Privoxy</application> will look for a file named
+ <filename>config</filename> in the current directory. Except on Win32 where
+ it will try <filename>config.txt</filename>. If no file is specified on the
+ command line and no default configuration file can be found,
+ <application>Privoxy</application> will fail to start.
+</para>
+
+
+<para>
+ The included default configuration files should give a reasonable starting
+ point, though may be somewhat aggressive in blocking junk. Most of the
+ per site configuration is done in the <quote>actions</quote> files. These
+ are where various cookie actions are defined, ad and banner blocking,
+ and other aspects of <application>Privoxy</application> configuration. There
+ are several such files included, with varying levels of aggressiveness.
+</para>
+
+<para>
+ You will probably want to keep an eye out for sites that require persistent
+ cookies, and add these to <filename>default.action</filename> as needed. By
+ default, most of these will be accepted only during the current browser
+ session, until you add them to the configuration. If you want the browser to
+ handle this instead, you will need to edit
+ <filename>default.action</filename> and disable this feature. If you use more
+ than one browser, it would make more sense to let
+ <application>Privoxy</application> handle this. In which case, the browser(s)
+ should be set to accept all cookies.
+</para>
+
+<para>
+ <application>Privoxy</application> is HTTP/1.1 compliant, but not all 1.1
+ features are as yet implemented. If browsers that support HTTP/1.1 (like
+ <application>Mozilla</application> or recent versions of I.E.) experience
+ problems, you might try to force HTTP/1.0 compatibility. For Mozilla, look
+ under <literal>Edit -> Preferences -> Debug -> Networking</literal>.
+ Or set the <quote>+downgrade</quote> config option in
+ <filename>default.action</filename>.
+</para>
+
+<para>
+ After running <application>Privoxy</application> for a while, you can
+ start to fine tune the configuration to suit your personal, or site,
+ preferences and requirements. There are many, many aspects that can
+ be customized. <quote>Actions</quote> (as specified in <filename>default.action</filename>)
+ can be adjusted by pointing your browser to
+ <ulink url="http://p.p/">http://p.p/</ulink>,
+ and then follow the link to <quote>edit the actions list</quote>.
+ (This is an internal page and does not require Internet access.)
+</para>
+
+<para>
+ In fact, various aspects of <application>Privoxy</application>
+ configuration can be viewed from this page, including
+ current configuration parameters, source code version numbers,
+ the browser's request headers, and <quote>actions</quote> that apply
+ to a given URL. In addition to the <filename>default.action</filename> file
+ editor mentioned above, <application>Privoxy</application> can also
+ be turned <quote>on</quote> and <quote>off</quote> from this page.
+</para>
+
+<para>
+ If you encounter problems, please verify it is a
+ <application>Privoxy</application> bug, by disabling
+ <application>Privoxy</application>, and then trying the same page.
+ Also, try another browser if possible to eliminate browser or site
+ problems. Before reporting it as a bug, see if there is not a configuration
+ option that is enabled that is causing the page not to load. You can then add
+ an exception for that page or site. For instance, try adding it to the
+ <literal>{fragile}</literal> section of <filename>default.action</filename>.
+ This will turn off most actions for this site. For more on troubleshooting
+ problem sites, see the <ulink
+ url="appendix.html#ACTIONSANAT">Appendix</ulink>. If a bug, please report it
+ to the developers (see below).
+</para>
+
+
+<!-- ~~~~~ New section ~~~~~ -->
+
+<sect2>
+<title>Command Line Options</title>
+<para>
+ <application>Privoxy</application> may be invoked with the following
+ command-line options:
+</para>
+
+<para>
+ <itemizedlist>
+
+ <listitem>
+ <para>
+ <emphasis>--version</emphasis>
+ </para>
+ <para>
+ Print version info and exit, Unix only.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ <emphasis>--help</emphasis>
+ </para>
+ <para>
+ Print a short usage info and exit, Unix only.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ <emphasis>--no-daemon</emphasis>
+ </para>
+ <para>
+ Don't become a daemon, i.e. don't fork and become process group
+ leader, don't detach from controlling tty. Unix only.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ <emphasis>--pidfile FILE</emphasis>
+
+ </para>
+ <para>
+ On startup, write the process ID to <emphasis>FILE</emphasis>. Delete the
+ <emphasis>FILE</emphasis> on exit. Failiure to create or delete the
+ <emphasis>FILE</emphasis> is non-fatal. If no <emphasis>FILE</emphasis>
+ option is given, no PID file will be used. Unix only.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ <emphasis>--user USER[.GROUP]</emphasis>
+
+ </para>
+ <para>
+ After (optionally) writing the PID file, assume the user ID of
+ <emphasis>USER</emphasis>, and if included the GID of GROUP. Exit if the
+ privileges are not sufficient to do so. Unix only.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ <emphasis>configfile</emphasis>
+ </para>
+ <para>
+ If no <emphasis>configfile</emphasis> is included on the command line,
+ <application>Privoxy</application> will look for a file named
+ <quote>config</quote> in the current directory (except on Win32
+ where it will look for <quote>config.txt</quote> instead). Specify
+ full path to avoid confusion.
+ </para>
+ </listitem>
+
+ </itemizedlist>
+</para>
+
</sect2>
</sect1>
<!-- ~~~~~ New section ~~~~~ -->
<sect1 id="configuration"><title><application>Privoxy</application> Configuration</title>
<para>
- All <application>Privoxy</application> configuration is kept
+ All <application>Privoxy</application> configuration is stored
in text files. These files can be edited with a text editor.
Many important aspects of <application>Privoxy</application> can
also be controlled easily with a web browser.
<para>
<application>Privoxy</application> can be reached by the special
URL <ulink url="http://p.p/">http://p.p/</ulink> (or alternately
- <ulink url="http://www.privoxy.org/config/">http://www.privoxy.org/config/</ulink>),
+ <ulink url="http://config.privoxy.org/">http://config.privoxy.org/</ulink>),
which is an internal page. You will see the following section:
</para>
For Unix, *BSD and Linux, all configuration files are located in
<filename>/etc/privoxy/</filename> by default. For MS Windows, OS/2, and
AmigaOS these are all in the same directory as the
- <application>Privoxy</application> executable. The name and number of
- configuration files has changed from previous versions, and is subject to
- change as development progresses.
+ <application>Privoxy</application> executable. <![%p-not-stable;[ The name
+ and number of configuration files has changed from previous versions, and is
+ subject to change as development progresses.]]>
</para>
<para>
The installed defaults provide a reasonable starting point, though possibly
aggressive by some standards. For the time being, there are only three
- default configuration files (this will change in time):
+ default configuration files (this may change in time):
</para>
<para>
file that can be accessed via <ulink
url="http://p.p">http://p.p</ulink>. (Other actions
files are included as well with differing levels of filtering
- and blocking, e.g. <filename>ijb-basic.action</filename>.)
+ and blocking, e.g. <filename>basic.action</filename>.)
</para>
</listitem>
automatically.
</para>
+<![%p-not-stable;[
<para>
While under development, the configuration content is subject to change.
The below documentation may not be accurate by the time you read this.
Also, what constitutes a <quote>default</quote> setting, may change, so
please check all your configuration files on important issues.
</para>
+]]>
</sect2>
<para>
<application>Privoxy</application> can use a number of other files to tell it
- what ads to block, what cookies to accept, etc. This section of the
- configuration file tells <application>Privoxy</application> where to find
- all those other files.
+ what ads to block, what cookies to accept, and perform other functions. This
+ section of the configuration file tells <application>Privoxy</application>
+ where to find all those other files.
</para>
<para>
<literal>
<msgtext>
<literallayout>
- <emphasis>trust-info-url http://www.your-site.com/why_we_block.html</emphasis>
- <emphasis>trust-info-url http://www.your-site.com/what_we_allow.html</emphasis>
+ <emphasis>trust-info-url http://www.example.com/why_we_block.html</emphasis>
+ <emphasis>trust-info-url http://www.example.com/what_we_allow.html</emphasis>
</literallayout>
</msgtext>
</literal>
<literal>
<msgtext>
<literallayout>
- <emphasis>proxy-info-url http://www.your-site.com/proxy.html</emphasis>
+ <emphasis>proxy-info-url http://www.example.com/proxy.html</emphasis>
</literallayout>
</msgtext>
</literal>
</literal>
</para>
+<![%p-not-stable;[
<para>
It is <emphasis>highly recommended</emphasis> that you enable ERROR
reporting (debug 8192), at least until v3.0 is released.
</para>
+]]>
<para>
The reporting of FATAL errors (i.e. ones which crash
</para>
<para>
- Your squid configuration could then look like this:
+Your squid configuration could then look like this (assuming that the IP
+address of the box is <literal>192.168.0.1</literal> ):
</para>
<para>
<!-- per feedback from user...
cache_peer 127.0.0.1 8118 parent 0 no-query
-->
- cache_peer 127.0.0.1 parent 8118 0 no-query
+ cache_peer 192.168.0.1 parent 8118 0 no-query
+
+ # don't listen to the whole world
+ http_port 192.168.0.1:3128
+
+ # define the local lan
+ acl mylocallan src 192.168.0.1-192.168.0.5/255.255.255.255
+
+ # grant access for http to local lan
+ http_access allow mylocallan
# Define ACL for protocol FTP
acl FTP proto FTP
<para>
The <quote>default.action</quote> file (formerly
- <filename>actionsfile</filename> or <filename>ijb.action</filename>) is used to define what actions
- <application>Privoxy</application> takes, and thus determines how images,
- cookies and various other aspects of HTTP content and transactions are
- handled. Images can be anything you want, including ads, banners, or just
- some obnoxious URL that you would rather not see. Cookies can be accepted
- or rejected, or accepted only during the current browser session (i.e.
- not written to disk). Changes to <filename>default.action</filename> should
- be immediately visible to <application>Privoxy</application> without
- the need to restart.
+ <filename>actionsfile</filename> or <filename>ijb.action</filename>) is used
+ to define what actions <application>Privoxy</application> takes, and thus
+ determines how ad images, cookies and various other aspects of HTTP content
+ and transactions are handled. These can be accepted or rejected for all
+ sites, or just those sites you choose. See below for a complete list of
+ actions.
+</para>
+<para>
+ Anything you want can blocked, including ads, banners, or just some obnoxious
+ URL that you would rather not see. Cookies can be accepted or rejected, or
+ accepted only during the current browser session (i.e. not written to disk).
+ Changes to <filename>default.action</filename> should be immediately visible
+ to <application>Privoxy</application> without the need to restart.
+</para>
+
+<para>
+ Note that some sites may misbehave, or possibly not work at all with some
+ actions. This may require some tinkering with the rules to get the most
+ mileage of <application>Privoxy's</application> features, and still be
+ able to see and enjoy just what you want to. There is no general rule of
+ thumb on these things. There just are too many variables, and sites are
+ always changing.
+
</para>
<para>
- The easiest way to edit <quote>actions</quote> file is with a browser by
+ The easiest way to edit the <quote>actions</quote> file is with a browser by
loading <ulink url="http://p.p/">http://p.p/</ulink>, and then select
<quote>Edit Actions List</quote>. A text editor can also be used.
</para>
</para>
<para>
- <emphasis>/index.html</emphasis> - matches the document <quote>/index.html</quote>, regardless of
- the domain.
+ <emphasis>/index.html</emphasis> - matches the document <quote>/index.html</quote>,
+ regardless of the domain. So would match any page named <quote>index.html</quote>
+ on any site.
</para>
<para>
</para>
<para>
- <emphasis>.example.com</emphasis> - matches any domain that <emphasis>ENDS</emphasis> in
- <quote>.example.com</quote>.
+ <emphasis>.example.com</emphasis> - matches any domain or sub-domain that
+ <emphasis>ENDS</emphasis> in <quote>.example.com</quote>.
</para>
<para>
<para>
If <application>Privoxy</application> was compiled with
- <quote>pcre</quote> support (default), Perl compatible regular expressions
- can be used. See the <filename>pcre/docs/</filename> directory or <quote>man
+ <quote>pcre</quote> support (the default), Perl compatible regular expressions
+ can be used. These are more flexible and powerful than other types
+ of <quote>regular expressions</quote>. See the <filename>pcre/docs/</filename> directory or <quote>man
perlre</quote> (also available on <ulink
url="http://www.perldoc.com/perl5.6/pod/perlre.html">http://www.perldoc.com/perl5.6/pod/perlre.html</ulink>)
for details. A brief discussion of regular expressions is in the
</para>
<para>
- Later defined actions always over-ride earlier ones. For multi-valued
- actions, the actions are applied in the order they are specified.
+ Later defined actions always over-ride earlier ones. So exceptions
+ to any rules you make, should come in the latter part of the file. For
+ multi-valued actions, the actions are applied in the order they are
+ specified.
</para>
<para>
<para>
Block this URL totally. In a default installation, a <quote>blocked</quote>
URL will result in bright red banner that says <quote>BLOCKED</quote>,
- with a reason why it is being blocked.
+ with a reason why it is being blocked, and an option to see it anyway.
+ The page displayed for this is the <quote>blocked</quote> template
+ file.
</para>
<para>
<literal>
will link to some script on their own server, giving the destination as a
parameter, which will then redirect you to the final target. URLs resulting
from this scheme typically look like:
- http://some.place/some_script?http://some.where-else.
+ <emphasis>http://some.place/some_script?http://some.where-else</emphasis>.
</para>
<para>
Sometimes, there are even multiple consecutive redirects encoded in the
</para>
<para>
The <quote>+fast-redirects</quote> option enables interception of these
- requests by <application>Privoxy</application>, who will cut off all but
- the last valid URL in the request and send a local redirect back to your
- browser without contacting the remote site.
+ types of requests by <application>Privoxy</application>, who will cut off
+ all but the last valid URL in the request and send a local redirect back to
+ your browser without contacting the intermediate site(s).
</para>
<para>
<literal>
Apply the filters in the <literal>section_header</literal>
section of the <filename>default.filter</filename> file to the site(s).
<filename>default.filter</filename> sections are grouped according to like
- functionality.
+ functionality. <application>Filters</application> can be used to
+ re-write any of the raw page content. This is a potentially a
+ very powerful feature!
</para>
<para>
Don't send the <quote>Referer:</quote> (sic) header to the web site. You
can block it, forge a URL to the same server as the request (which is
preferred because some sites will not send images otherwise) or set it to a
- constant string of your choice.
+ constant, user defined string of your choice.
</para>
<para>
<literal>
See <quote>+image-blocker{}</quote> below for the control over what is actually sent.
If you want <emphasis>invisible</emphasis> ads, they should be defined as
<emphasis>images</emphasis> and <emphasis>blocked</emphasis>. And also,
- <quote>image-blocker</quote> should be set to <quote>blank</quote>.
+ <quote>image-blocker</quote> should be set to <quote>blank</quote>. Note you
+ cannot treat HTML pages as images in most cases. For instance, frames
+ require an HTML page to display. So a frame that is an ad, cannot be
+ treated as an image. Forcing an <quote>image</quote> in this
+ situation just will not work.
</para>
<para>
<literal>
<application>Privoxy</application>, since <quote>+filter</quote>,
<quote>+no-popup</quote> and <quote>+gif-deanimate</quote> will not work on
compressed data. This will slow down connections to those websites,
- though. Default is <quote>nocompression</quote> is turned on.
+ though. Default is <quote>no-compression</quote> is turned on.
</para>
<para>
</para>
<para>
- Now some URLs that we want <quote>blocked</quote>, ie we won't see them.
- Many of these use regular expressions that will expand to match multiple
- URLs:
+ Now some URLs that we want <quote>blocked</quote> (normally generates
+ the <quote>blocked</quote> banner). Many of these use regular expressions
+ that will expand to match multiple URLs:
</para>
<para>
content he may depend on. There is no way to have hard and fast rules
for all sites. See the <link linkend="ACTIONSANAT">Appendix</link>
for a brief example on troubleshooting actions.
-
</para>
</sect3>
<quote>z</quote>, <quote>0</quote>-<quote>9</quote>, <quote>+</quote>, and
<quote>-</quote>. Alias names are not case sensitive, and
<emphasis>must be defined before anything</emphasis> else in the
- <filename>default.action</filename>file ! And there can only be one set of
+ <filename>default.action</filename>file! And there can only be one set of
<quote>aliases</quote> defined.
</para>
<literal>
<msgtext>
<literallayout>
- # Useful customer aliases we can use later. These must come first!
+ # Useful custom aliases we can use later. These must come first!
{{alias}}
+no-cookies = +no-cookies-set +no-cookies-read
-no-cookies = -no-cookies-set -no-cookies-read
</literal>
</para>
+<para>
+ The <quote>shop</quote> and <quote>fragile</quote> aliases are often used for
+ <quote>problem</quote> sites that require most actions to be disabled
+ in order to function properly.
+
+</para>
+
</sect3>
</sect2>
<filename>default.filter</filename>, located in the config directory.
</para>
+<para>
+ This is potentially a very powerful feature, and requires knowledge of both
+ <quote>regular expression</quote> and HTML in order create custom
+ filters. But, there are a number of useful filters included with
+ <application>Privoxy</application> for many common situations.
+</para>
+
<para>
The included example file is divided into sections. Each section begins
with the <literal>FILTER</literal> keyword, followed by the identifier
for that section, e.g. <quote>FILTER: webbugs</quote>. Each section performs
a similar type of filtering, such as <quote>html-annoyances</quote>.
-
</para>
<para>
s/microsoft(?!.com)/MicroSuck/ig
- # Buzzword Bingo:
- #
- s/industry-leading|cutting-edge|award-winning/<font color=red><b>BINGO!</b></font>/ig
- </literallayout>
- </msgtext>
- </literal>
-</para>
-
-<para>
- Kill those pesky little web-bugs:
-</para>
-
-<para>
- <literal>
- <msgtext>
- <literallayout>
- # webbugs: Squish WebBugs (1x1 invisible GIFs used for user tracking)
- FILTER: webbugs
-
- s/<img\s+[^>]*?(width|height)\s*=\s*['"]?1\D[^>]*?(width|height)\s*=\s*['"]?1(\D[^>]*?)?>/<!-- Squished WebBug -->/sig
- </literallayout>
- </msgtext>
- </literal>
-</para>
-
-</sect2>
-
-<!-- ~ End section ~ -->
-
-
-
-<!-- ~~~~~ New section ~~~~~ -->
-
-<sect2>
-<title>Templates</title>
-<para>
- When <application>Privoxy</application> displays one of its internal
- pages, such as a 404 Not Found error page, it uses the appropriate template.
- On Linux, BSD, and Unix, these are located in
- <filename>/etc/privoxy/templates</filename> by default. These may be
- customized, if desired.
-
-</para>
-</sect2>
-
-</sect1>
-
-<!-- ~ End section ~ -->
-
-
-
-<!-- ~~~~~ New section ~~~~~ -->
-<sect1 id="quickstart"><title>Quickstart to Using <application>Privoxy</application></title>
-<para>
- Install package, then run and enjoy! <application>Privoxy</application>
- is typically started by specifying the main configuration file to be
- used on the command line. Example Unix startup command:
-</para>
-
-<para>
- <screen>
-
- # /usr/sbin/privoxy /etc/privoxy/config
-
- </screen>
-</para>
-
-<para>
- An init script is provided for SuSE and Redhat.
-</para>
-
-<para>
-For for SuSE: /etc/rc.d/privoxy start
-</para>
-
-<para>
-For RedHat: /etc/rc.d/init.d/privoxy start
-</para>
-
-
-<para>
- If no configuration file is specified on the command line,
- <application>Privoxy</application> will look for a file named
- <filename>config</filename> in the current directory. Except on Win32 where
- it will try <filename>config.txt</filename>. If no file is specified on the
- command line and no default configuration file can be found,
- <application>Privoxy</application> will fail to start.
-</para>
-
-<para>
- Be sure your browser is set to use the proxy which is by default at
- localhost, port 8118. With <application>Netscape</application> (and
- <application>Mozilla</application>), this can be set under <literal>Edit
- -> Preferences -> Advanced -> Proxies -> HTTP Proxy</literal>.
- For <application>Internet Explorer</application>: <literal>Tools >
- Internet Properties -> Connections -> LAN Setting</literal>. Then,
- check <quote>Use Proxy</quote> and fill in the appropriate info (Address:
- localhost, Port: 8118). Include if HTTPS proxy support too.
-</para>
-
-<para>
- The included default configuration files should give a reasonable starting
- point, though may be somewhat aggressive in blocking junk. You will probably
- want to keep an eye out for sites that require persistent cookies, and add these to
- <filename>default.action</filename> as needed. By default, most of these will
- be accepted only during the current browser session, until you add them to
- the configuration. If you want the browser to handle this instead, you will
- need to edit <filename>default.action</filename> and disable this feature. If you
- use more than one browser, it would make more sense to let
- <application>Privoxy</application> handle this. In which case, the
- browser(s) should be set to accept all cookies.
-</para>
-
-<para>
- If a particular site shows problems loading properly, try adding it
- to the <literal>{fragile}</literal> section of
- <filename>default.action</filename>. This will turn off most actions for
- this site.
-</para>
-
-<para>
- <application>Privoxy</application> is HTTP/1.1 compliant, but not all 1.1
- features are as yet implemented. If browsers that support HTTP/1.1 (like
- <application>Mozilla</application> or recent versions of I.E.) experience
- problems, you might try to force HTTP/1.0 compatibility. For Mozilla, look
- under <literal>Edit -> Preferences -> Debug -> Networking</literal>.
- Or set the <quote>+downgrade</quote> config option in
- <filename>default.action</filename>.
-</para>
-
-<para>
- After running <application>Privoxy</application> for a while, you can
- start to fine tune the configuration to suit your personal, or site,
- preferences and requirements. There are many, many aspects that can
- be customized. <quote>Actions</quote> (as specified in <filename>default.action</filename>)
- can be adjusted by pointing your browser to
- <ulink url="http://p.p/">http://p.p/</ulink>,
- and then follow the link to <quote>edit the actions list</quote>.
- (This is an internal page and does not require Internet access.)
+ # Buzzword Bingo:
+ #
+ s/industry-leading|cutting-edge|award-winning/<font color=red><b>BINGO!</b></font>/ig
+ </literallayout>
+ </msgtext>
+ </literal>
</para>
<para>
- In fact, various aspects of <application>Privoxy</application>
- configuration can be viewed from this page, including
- current configuration parameters, source code version numbers,
- the browser's request headers, and <quote>actions</quote> that apply
- to a given URL. In addition to the <filename>default.action</filename> file
- editor mentioned above, <application>Privoxy</application> can also
- be turned <quote>on</quote> and <quote>off</quote> from this page.
+ Kill those pesky little web-bugs:
</para>
<para>
- If you encounter problems, please verify it is a
- <application>Privoxy</application> bug, by disabling
- <application>Privoxy</application>, and then trying the same page.
- Also, try another browser if possible to eliminate browser or site
- problems. Before reporting it as a bug, see if there is not a configuration
- option that is enabled that is causing the page not to load. You can
- then add an exception for that page or site. If a bug, please report it to
- the developers (see below).
+ <literal>
+ <msgtext>
+ <literallayout>
+ # webbugs: Squish WebBugs (1x1 invisible GIFs used for user tracking)
+ FILTER: webbugs
+
+ s/<img\s+[^>]*?(width|height)\s*=\s*['"]?1\D[^>]*?(width|height)\s*=\s*['"]?1(\D[^>]*?)?>/<!-- Squished WebBug -->/sig
+ </literallayout>
+ </msgtext>
+ </literal>
</para>
+</sect2>
+
+<!-- ~ End section ~ -->
+
<!-- ~~~~~ New section ~~~~~ -->
<sect2>
-<title>Command Line Options</title>
+<title>Templates</title>
<para>
- <application>Privoxy</application> may be invoked with the following
- command-line options:
+ When <application>Privoxy</application> displays one of its internal
+ pages, such as a 404 Not Found error page, it uses the appropriate template.
+ On Linux, BSD, and Unix, these are located in
+ <filename>/etc/privoxy/templates</filename> by default. These may be
+ customized, if desired.
</para>
-
<para>
- <itemizedlist>
-
- <listitem>
- <para>
- <emphasis>--version</emphasis>
- </para>
- <para>
- Print version info and exit, Unix only.
- </para>
- </listitem>
- <listitem>
- <para>
- <emphasis>--help</emphasis>
- </para>
- <para>
- Print a short usage info and exit, Unix only.
- </para>
- </listitem>
- <listitem>
- <para>
- <emphasis>--no-daemon</emphasis>
- </para>
- <para>
- Don't become a daemon, i.e. don't fork and become process group
- leader, don't detach from controlling tty. Unix only.
- </para>
- </listitem>
- <listitem>
- <para>
- <emphasis>--pidfile FILE</emphasis>
-
- </para>
- <para>
- On startup, write the process ID to <emphasis>FILE</emphasis>. Delete the
- <emphasis>FILE</emphasis> on exit. Failiure to create or delete the
- <emphasis>FILE</emphasis> is non-fatal. If no <emphasis>FILE</emphasis>
- option is given, no PID file will be used. Unix only.
- </para>
- </listitem>
- <listitem>
- <para>
- <emphasis>--user USER[.GROUP]</emphasis>
-
- </para>
- <para>
- After (optionally) writing the PID file, assume the user ID of
- <emphasis>USER</emphasis>, and if included the GID of GROUP. Exit if the
- privileges are not sufficient to do so. Unix only.
- </para>
- </listitem>
- <listitem>
- <para>
- <emphasis>configfile</emphasis>
- </para>
- <para>
- If no <emphasis>configfile</emphasis> is included on the command line,
- <application>Privoxy</application> will look for a file named
- <quote>config</quote> in the current directory (except on Win32
- where it will look for <quote>config.txt</quote> instead). Specify
- full path to avoid confusion.
- </para>
- </listitem>
+ The default <quote>Blocked</quote> banner page with the bright red top
+ banner, is called just <quote><filename>blocked</filename></quote>. This
+ may be customized or replaced with something else if desired.
- </itemizedlist>
</para>
-
</sect2>
</sect1>
<sect1 id="contact"><title>Contacting the Developers, Bug Reporting and Feature
Requests</title>
-<para>
-We value your feedback. However, to provide you with the best support,
-please note:
-
- <itemizedlist>
-
- <listitem><para>Use the <ulink url="http://sourceforge.net/tracker/?group_id=11118&atid=211118">Sourceforge support forum</ulink> to get
- help.</para></listitem>
-
- <listitem><para>Submit bugs only thru our <ulink url="http://sourceforge.net/tracker/?group_id=11118&atid=111118">Sourceforge bug
- forum</ulink>.
-Make sure that the bug has not already been submitted. Please try to
-verify that it is a <application>Privoxy</application> bug, and not
-a browser or site bug first. If you are using your own custom configuration,
-please try the stock configs to see if the problem is a configuration
-related bug. And if not using the latest development snapshot, please
-try the latest one. Or even better, CVS sources.</para>
-</listitem>
-
-
- <listitem><para>Submit feature requests only thru our <ulink
- url="http://sourceforge.net/tracker/?atid=361118&group_id=11118&func=browse">Sourceforge feature request forum</ulink>.</para></listitem>
-
-
- </itemizedlist>
-</para>
+<!-- Include contacting.sgml boilerplate: -->
-<para>
-For any other issues, feel free to use the <ulink url="http://sourceforge.net/mail/?group_id=11118">mailing lists</ulink>.
-</para>
+ &contacting;
-<para>
- Anyone interested in actively participating in development and related
- discussions can join the appropriate mailing list
- <ulink url="http://sourceforge.net/mail/?group_id=11118">here</ulink>.
- Archives are available here too.
-</para>
+<!-- end boilerplate -->
</sect1>
<!-- ~~~~~ New section ~~~~~ -->
<sect1 id="copyright"><title>Copyright and History</title>
-<sect2>
-<title>License</title>
-<para>
- <application>Privoxy</application> is free software; you can
- redistribute it and/or modify it under the terms of the GNU General Public
- License as published by the Free Software Foundation; either version 2 of the
- License, or (at your option) any later version.
-</para>
-
-<para>
- This program is distributed in the hope that it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
- FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
- details, which is available from <ulink
- url="http://www.gnu.org/copyleft/gpl.html">the Free Software Foundation,
- Inc</ulink>, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-</para>
-
+<sect2><title>Copyright</title>
+<!-- Include copyright.sgml: -->
+ ©right;
+<!-- end copyright -->
</sect2>
<!-- ~ End section ~ -->
<!-- ~~~~~ New section ~~~~~ -->
-<sect2>
-<title>History</title>
-<para>
- <application>Privoxy</application> is derived from
- <application>the Internet Junkbuster</application>, with many
- improvments and enhancements over the original.
-</para>
-
-<para>
- <application>Junkbuster</application> was originally written by Anonymous
- Coders and <ulink
- url="http://www.junkbusters.com">Junkbuster's
- Corporation</ulink>, and was released as free open-source software under the
- GNU GPL. <ulink url="http://www.waldherr.org/junkbuster/">Stefan
- Waldherr</ulink> made many improvements, and started the <ulink
- url="http://sourceforge.net/projects/ijbswa/">SourceForge project
- Privoxy</ulink> to rekindle development. There are now several active
- developers contributing. The last stable release of
- <application>Junkbuster</application> was v2.0.2, which has now
- grown whiskers ;-).
-</para>
-
+<sect2 id="history"><title>History</title>
+<!-- Include history.sgml: -->
+ &history;
+<!-- end history -->
</sect2>
-
</sect1>
<!-- ~~~~~ New section ~~~~~ -->
-<sect1 id="seealso"><title>See also</title>
-<para>
-
- <simplelist>
- <member>
- <ulink url="http://sourceforge.net/projects/ijbswa">http://sourceforge.net/projects/ijbswa</ulink>
- </member>
- </simplelist>
- <simplelist>
- <member>
- <ulink url="http://www.privoxy.org/">http://www.privoxy.org/</ulink>
- </member>
- </simplelist>
- <simplelist>
- <member>
- <ulink url="http://p.p/">http://p.p/</ulink>
- </member>
- </simplelist>
- <simplelist>
- <member>
- <ulink url="http://www.junkbusters.com/ht/en/cookies.html">http://www.junkbusters.com/ht/en/cookies.html</ulink>
- </member>
- </simplelist>
- <simplelist>
- <member>
- <ulink url="http://www.waldherr.org/junkbuster/">http://www.waldherr.org/junkbuster/</ulink>
- </member>
- </simplelist>
- <simplelist>
- <member>
- <ulink url="http://privacy.net/analyze/">http://privacy.net/analyze/</ulink>
- </member>
- </simplelist>
- <simplelist>
- <member>
- <ulink url="http://www.squid-cache.org/">http://www.squid-cache.org/</ulink>
- </member>
- </simplelist>
-
-</para>
+<sect1 id="seealso"><title>See Also</title>
+<!-- Include seealso.sgml: -->
+ &seealso;
+<!-- end seealso -->
</sect1>
<para>
Since <application>Privoxy</application> proxies each requested
web page, it is easy for <application>Privoxy</application> to
- trap certain URLs. In this way, we can talk directly to
+ trap certain special URLs. In this way, we can talk directly to
<application>Privoxy</application>, and see how it is
configured, see how our rules are being applied, change these
rules and other configuration options, and even turn
</para>
<blockquote>
<para>
- <ulink url="http://www.privoxy.org/config/">http://www.privoxy.org/config/</ulink>
+ <ulink url="http://config.privoxy.org/">http://config.privoxy.org/</ulink>
</para>
</blockquote>
<para>
</para>
<blockquote>
<para>
- <ulink url="http://www.privoxy.org/config/show-status">http://www.privoxy.org/config/show-status</ulink>
+ <ulink url="http://config.privoxy.org/show-status">http://config.privoxy.org/show-status</ulink>
</para>
</blockquote>
</listitem>
</para>
<blockquote>
<para>
- <ulink url="http://www.privoxy.org/config/show-version">http://www.privoxy.org/config/show-version</ulink>
+ <ulink url="http://config.privoxy.org/show-version">http://config.privoxy.org/show-version</ulink>
</para>
</blockquote>
</listitem>
</para>
<blockquote>
<para>
- <ulink url="http://www.privoxy.org/config/show-request">http://www.privoxy.org/config/show-request</ulink>
+ <ulink url="http://config.privoxy.org/show-request">http://config.privoxy.org/show-request</ulink>
</para>
</blockquote>
</listitem>
</para>
<blockquote>
<para>
- <ulink url="http://www.privoxy.org/config/show-url-info">http://www.privoxy.org/config/show-url-info</ulink>
+ <ulink url="http://config.privoxy.org/show-url-info">http://config.privoxy.org/show-url-info</ulink>
</para>
</blockquote>
</listitem>
<listitem>
<para>
- Toggle Privoxy on or off:
+ Toggle Privoxy on or off. In this case, <quote>Privoxy</quote> continues
+ to run, but only as a pass-through proxy, with no actions taking place:
</para>
<blockquote>
<para>
- <ulink url="http://www.privoxy.org/config/toggle">http://www.privoxy.org/config/toggle</ulink>
+ <ulink url="http://config.privoxy.org/toggle">http://config.privoxy.org/toggle</ulink>
</para>
</blockquote>
<para>
</para>
<blockquote>
<para>
- <ulink url="http://www.privoxy.org/config/toggle?set=disable">http://www.privoxy.org/config/toggle?set=disable</ulink>
+ <ulink url="http://config.privoxy.org/toggle?set=disable">http://config.privoxy.org/toggle?set=disable</ulink>
</para>
</blockquote>
<blockquote>
<para>
- <ulink url="http://www.privoxy.org/config/toggle?set=enable">http://www.privoxy.org/config/toggle?set=enable</ulink>
+ <ulink url="http://config.privoxy.org/toggle?set=enable">http://config.privoxy.org/toggle?set=enable</ulink>
</para>
</blockquote>
</listitem>
</para>
<blockquote>
<para>
- <ulink url="http://www.privoxy.org/config/edit-actions">http://www.privoxy.org/config/edit-actions</ulink>
+ <ulink url="http://config.privoxy.org/edit-actions">http://config.privoxy.org/edit-actions</ulink>
</para>
</blockquote>
</listitem>
</para>
+<sect3 id="bookmarklets">
+<title>Bookmarklets</title>
+<para>
+ Here are some bookmarklets to allow you to easily access a
+ <quote>mini</quote> version of this page. They are designed for MS Internet
+ Explorer, but should work equally well in Netscape, Mozilla, and other
+ browsers which support JavaScript. They are designed to run directly from
+ your bookmarks - not by clicking the links below (although that will work for
+ testing).
+</para>
+<para>
+ To save them, right-click the link and choose <quote>Add to Favorites</quote>
+ (IE) or <quote>Add Bookmark</quote> (Netscape). You will get a warning that
+ the bookmark <quote>may not be safe</quote> - just click OK. Then you can run the
+ Bookmarklet directly from your favourites/bookmarks. For even faster access,
+ you can put them on the <quote>Links</quote> bar (IE) or the <quote>Personal
+ Toolbar</quote> (Netscape), and run them with a single click.
+</para>
+
+<para>
+ <itemizedlist>
+
+ <listitem>
+ <para>
+ <ulink url="javascript:void(window.open('http://config.privoxy.org/toggle?mini=y&set=enabled','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());">Enable Privoxy</ulink>
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ <ulink url="javascript:void(window.open('http://config.privoxy.org/toggle?mini=y&set=disabled','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());">Disable Privoxy</ulink>
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ <ulink url="javascript:void(window.open('http://config.privoxy.org/toggle?mini=y&set=toggle','ijbstatus','width=250,height=100,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());">Toggle Privoxy</ulink> (Toggles between enabled and disabled)
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ <ulink url="javascript:void(window.open('http://config.privoxy.org/toggle?mini=y','ijbstatus','width=250,height=2,resizable=yes,scrollbars=no,toolbar=no,location=no,directories=no,status=no,menubar=no,copyhistory=no').focus());">View Privoxy Status</ulink>
+ </para>
+ </listitem>
+
+ </itemizedlist>
+</para>
+
+<para>
+ Credit: The site which gave me the general idea for these bookmarklets is
+ <ulink url="http://www.bookmarklets.com">www.bookmarklets.com</ulink>. They
+ have more information about bookmarklets.
+</para>
+
+
+</sect3>
+
</sect2>
<para>
The way <application>Privoxy</application> applies <quote>actions</quote>
- to any given URL can be complex, and not always so easy to understand what
- is happening. And sometimes we need to be able to <emphasis>see</emphasis>
- just what <application>Privoxy</application> is doing. Especially,
- if something <application>Privoxy</application> is doing is causing
- us a problem inadvertantly. It can be a little daunting to look at
- the actions files themselves, since they tend to be filled with
+ and <quote>filters</quote> to any given URL can be complex, and not always so
+ easy to understand what is happening. And sometimes we need to be able to
+ <emphasis>see</emphasis> just what <application>Privoxy</application> is
+ doing. Especially, if something <application>Privoxy</application> is doing
+ is causing us a problem inadvertantly. It can be a little daunting to look at
+ the actions and filters files themselves, since they tend to be filled with
<quote>regular expressions</quote> whose consequences are not always
so obvious. <application>Privoxy</application> provides the
- <ulink url="http://www.privoxy.org/config/show-url-info">http://www.privoxy.org/config/show-url-info</ulink>
+ <ulink url="http://config.privoxy.org/show-url-info">http://config.privoxy.org/show-url-info</ulink>
page that can show us very specifically how <application>actions</application>
are being applied to any given URL. This is a big help for troubleshooting.
</para>
actual URL that is pasted into the prompt area -- not any sub-URLs. If you
want to know about embedded URLs like ads, you will have to dig those out of
the HTML source. Use your browser's <quote>View Page Source</quote> option
- for this.
+ for this. Or right click on the ad, and grab the URL.
</para>
<para>
</para>
<para>
- Now the page displays ;-)
+ Now the page displays ;-) Be sure to flush your browser's caches when
+ making such changes. Or, try using <literal>Shift+Reload</literal>.
+</para>
+
+<para>
+ But now what about a situation where we get no explicit matches like
+ we did with:
+</para>
+
+<para>
+ <screen>
+
+ { -block }
+ /adsl
+
+ </screen>
+</para>
+
+<para>
+ That actually was very telling and pointed us quickly to where the problem
+ was. If you don't get this kind of match, then it means one of the default
+ rules in the first section is causing the problem. This would require some
+ guesswork, and maybe a little trial and error to isolate the offending rule.
+ One likely cause would be one of the <quote>{+filter}</quote> actions. Try
+ adding the URL for the site to one of aliases that turn off <quote>+filter</quote>:
+</para>
+
+<para>
+ <screen>
+
+ {shop}
+ .quietpc.com
+ .worldpay.com # for quietpc.com
+ .jungle.com
+ .scan.co.uk
+ .forbes.com
+
+ </screen>
+</para>
+
+<para>
+ <quote>{shop}</quote> is an <quote>alias</quote> that expands to
+ <quote>{ -filter -no-cookies -no-cookies-keep }</quote>. Or you could do
+ your own exception to negate filtering:
+
+</para>
+
+<para>
+ <screen>
+ {-filter}
+ .forbes.com
+
+ </screen>
+</para>
+
+<para>
+ <quote>{fragile}</quote> is an alias that disables most actions. This can be
+ used as a last resort for problem sites. Remember to flush caches! If this
+ still does not work, you will have to go through the remaining actions one by
+ one to find which one(s) is causing the problem.
</para>
</sect2>
Temple Place - Suite 330, Boston, MA 02111-1307, USA.
$Log: user-manual.sgml,v $
+ Revision 1.68 2002/04/04 18:46:47 swa
+ consistent look. reuse of copyright, history et. al.
+
+ Revision 1.67 2002/04/04 17:27:57 swa
+ more single file to be included at multiple points. make maintaining easier
+
+ Revision 1.66 2002/04/04 06:48:37 hal9
+ Structural changes to allow for conditional inclusion/exclusion of content
+ based on entity toggles, e.g. 'entity % p-not-stable "INCLUDE"'. And
+ definition of internal entities, e.g. 'entity p-version "2.9.13"' that will
+ eventually be set by Makefile.
+ More boilerplate text for use across multiple docs.
+
+ Revision 1.65 2002/04/03 19:52:07 swa
+ enhance squid section due to user suggestion
+
+ Revision 1.64 2002/04/03 03:53:43 hal9
+ A few minor bug fixes, and touch ups. Ready for review.
+
+ Revision 1.63 2002/04/01 16:24:49 hal9
+ Define entities to include boilerplate text. See doc/source/*.
+
+ Revision 1.62 2002/03/30 04:15:53 hal9
+ - Fix privoxy.org/config links.
+ - Paste in Bookmarklets from Toggle page.
+ - Move Quickstart nearer top, and minor rework.
+
+ Revision 1.61 2002/03/29 01:31:08 hal9
+ Minor update.
+
+ Revision 1.60 2002/03/27 01:57:34 hal9
+ Added more to Anatomy section.
+
+ Revision 1.59 2002/03/27 00:54:33 hal9
+ Touch up intro for new name.
+
Revision 1.58 2002/03/26 22:29:55 swa
we have a new homepage!
projects / privoxy.git / blobdiff