<!entity p-intro SYSTEM "privoxy.sgml">
<!entity history SYSTEM "history.sgml">
<!entity seealso SYSTEM "seealso.sgml">
-<!entity contacting SYSTEM "contacting.sgml">
-<!entity copyright SYSTEM "copyright.sgml">
-<!entity license SYSTEM "license.sgml">
-<!entity p-version "3.0.18">
+<!entity p-version "3.0.29">
<!entity p-status "stable">
<!entity % p-not-stable "IGNORE">
<!entity % p-stable "INCLUDE">
<!entity my-copy "©"> <!-- kludge for docbook2man -->
]>
<!--
- File : $Source: /cvsroot/ijbswa/current/doc/source/developer-manual.sgml,v $
+ File : doc/source/developer-manual.sgml
Purpose : developer manual
- This file belongs into
- ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/
- $Id: developer-manual.sgml,v 2.36 2011/09/04 11:10:12 fabiankeil Exp $
-
- Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
+ Copyright (C) 2001-2020 Privoxy Developers https://www.privoxy.org/
See LICENSE.
========================================================================
<subscript>
<!-- Completely the wrong markup, but very little is allowed -->
<!-- in this part of an article. FIXME -->
- <link linkend="copyright">Copyright</link> &my-copy; 2001-2009 by
- <ulink url="http://www.privoxy.org/">Privoxy Developers</ulink>
+ <ulink url="https://www.privoxy.org/user-manual/copyright.html">Copyright</ulink>
+ &my-copy; 2001-2020 by
+ <ulink url="https://www.privoxy.org/">Privoxy Developers</ulink>
</subscript>
</pubdate>
-
- <pubdate>$Id: developer-manual.sgml,v 2.36 2011/09/04 11:10:12 fabiankeil Exp $</pubdate>
-
<!--
Note: this should generate a separate page, and a live link to it.
Please note that this document is constantly evolving. This copy represents
the state at the release of version &p-version;.
You can find the latest version of the this manual at <ulink
- url="http://www.privoxy.org/developer-manual/">http://www.privoxy.org/developer-manual/</ulink>.
- Please see <link linkend="contact">the Contact section</link>
- on how to contact the developers.
+ url="https://www.privoxy.org/developer-manual/">https://www.privoxy.org/developer-manual/</ulink>.
+ Please have a look at the
+ <ulink url="https://www.privoxy.org/user-manual/contact.html">contact section in the user manual</ulink>
+ if you are interested in contacting the developers.
</para>
-<!-- <para> -->
-<!-- Feel free to send a note to the developers at <email>ijbswa-developers@lists.sourceforge.net</email>. -->
-<!-- </para> -->
</abstract>
</artheader>
<sect2 id="quickstart"><title>Quickstart to Privoxy Development</title>
<para>
The first step is to join the <ulink
- url="mailto:ijbswa-developers@lists.sourceforge.net">developer's mailing list</ulink>.
- You can submit your ideas, or even better patches. Patches are best
- submitted to the Sourceforge tracker set up for this purpose, but
- can be sent to the list for review too.
+ url="https://lists.privoxy.org/mailman/listinfo/privoxy-devel">privoxy-devel mailing list</ulink>.
+ You can submit your ideas or, even better, patches.
+ Patches can also be submitted to the
+ <ulink url="https://sourceforge.net/p/ijbswa/patches/">Sourceforge patch tracker</ulink>.
</para>
<para>
- You will also need to have a cvs package installed, which will
- entail having ssh installed as well (which seems to be a requirement of
- SourceForge), in order to access the cvs repository. Having the GNU build
- tools is also going to be important (particularly, autoconf and gmake).
+ You will also need to have a git package installed,
+ in order to access the git repository.
+ Having the GNU build tools is also going to be important (particularly,
+ autoconf and gmake).
</para>
<para>
For the time being (read, this section is under construction), you can
</sect1>
<!-- ~~~~~ New section ~~~~~ -->
- <sect1 id="cvs"><title>The CVS Repository</title>
+ <sect1 id="git"><title>The Git Repository</title>
<para>
If you become part of the active development team, you will eventually
- need write access to our holy grail, the CVS repository. One of the
+ need write access to our holy grail, the Git repository. One of the
team members will need to set this up for you. Please read
- this chapter completely before accessing via CVS.
+ this chapter completely before accessing via Git.
</para>
- <sect2 id="cvsaccess"><title>Access to CVS</title>
+ <sect2 id="gitaccess"><title>Access to Git</title>
+ <para>
+ The project's Git repository is hosted at the
+ <ulink url="https://privoxy.org/">Privoxy website</ulink>.
+ For Privoxy team members with push privileges the Git repository URL is
+ <literal>ssh://git@git.privoxy.org:23/git/privoxy.git</literal>.
+ </para>
+ <para>
+ Contributors without push privileges can
+ <quote>git clone https://www.privoxy.org/git/privoxy.git</quote>.
+ </para>
<para>
- The project's CVS repository is hosted on
- <ulink url="http://sourceforge.net/">SourceForge.</ulink>
- Please refer to the chapters 6 and 7 in
- <ulink url="http://sourceforge.net/docman/?group_id=1">SF's site
- documentation</ulink> for the technical access details for your
- operating system. For historical reasons, the CVS server is
- called <literal>ijbswa.cvs.sourceforge.net</literal>, the repository is
- called <literal>ijbswa</literal>, and the source tree module is called
- <literal>current</literal>.
+ The central repository is called <literal>privoxy</literal>, and the
+ source branch is called <literal>master</literal>. Subfolders exist
+ within the project for target-dependent build and packaging tools, each
+ including the name of the target operating system in their name (e.g.
+ Windows, OSXPackageBuilder, debian). There is a webview of the Git
+ hierarchy at
+ <ulink url="https://www.privoxy.org/gitweb/?p=privoxy.git;a=tree">
+ https://www.privoxy.org/gitweb/?p=privoxy.git;a=tree</ulink>,
+ which might help with visualizing how these pieces fit together.
</para>
</sect2>
- <sect2 id="cvsbranches">
+ <sect2 id="gitbranches">
<title>Branches</title>
<para>
- Within the CVS repository, there are modules and branches. As
- mentioned, the sources are in the <literal>current</literal>
- <quote>module</quote>. Other modules are present for platform specific
- issues. There is a webview of the CVS hierarchy at <ulink
- url="http://ijbswa.cvs.sourceforge.net/ijbswa/">http://ijbswa.cvs.sourceforge.net/ijbswa/</ulink>,
- which might help with visualizing how these pieces fit together.
+ Whilst the central repository contains only the master branch, developers
+ are of course free to create branches in their local repositories as they
+ develop features, fixes, or update the target-dependent tools. Only once
+ such changes are fully tested ought they be pushed back to the central
+ repository master branch.
</para>
+ <!--
<para>
Branches are used to fork a sub-development path from the main trunk.
Within the <literal>current</literal> module where the sources are, there
just for stable series releases (e.g. 3.0.0 -> 3.0.1 -> 3.0.2, etc).
Once the initial stable release of any stable branch has taken place,
this branch is <emphasis>only used for bugfixes</emphasis>, which have
- had prior testing before being committed to CVS. (See <link
+ had prior testing before being committed to Git. (See <link
linkend="versionnumbers">Version Numbers</link> below for details on
versioning.)
</para>
+ -->
<para>
At one time there were two distinct branches: stable and unstable. The
more drastic changes were to be in the unstable branch. These branches
-->
</sect2>
- <sect2 id="cvscommit"><title>CVS Commit Guidelines</title>
+ <sect2 id="gitcommit"><title>Git Commit Guidelines</title>
<para>
The source tree is the heart of every software project. Every effort must
be made to ensure that it is readable, compilable and consistent at all
- times. There are differing guidelines for the stable branch and the
- main development trunk, and we ask anyone with CVS access to strictly
+ times. <!-- There are differing guidelines for the stable branch and the
+ main development trunk, and --> We expect anyone with Git access to strictly
adhere to the following guidelines:
</para>
<para>
Basic Guidelines, for all branches:
</para>
- <para>
<itemizedlist>
<listitem><para>
Please don't commit even
If necessary, prepare the commit messages in advance.
</para></listitem>
<listitem><para>
- Before changing things on CVS, make sure that your changes are in line
+ Before changing things on Git, make sure that your changes are in line
with the team's general consensus on what should be done.
</para></listitem>
<listitem>
<para>
Note that near a major public release, we get more cautious.
There is always the possibility to submit a patch to the <ulink
- url="http://sourceforge.net/tracker/?atid=311118&group_id=11118&func=browse">patch
+ url="https://sourceforge.net/p/ijbswa/patches/">patch
tracker</ulink> instead.
</para>
</listitem>
</itemizedlist>
- </para>
<!--
<para>
</listitem>
<listitem>
<para>
- Alternately, proposed changes can be submitted as patches to the patch tracker on
- Sourceforge first: <ulink
- url="http://sourceforge.net/tracker/?group_id=11118&atid=311118">http://sourceforge.net/tracker/?group_id=11118&atid=311118</ulink>.
+ Alternately, proposed changes can be submitted as patches output by
+ <literal>git format-patch</literal> to the privoxy-devel mailing list
+ or alternatively to the patch tracker on Sourceforge:
+ <ulink url="https://sourceforge.net/p/ijbswa/patches/">
+ https://sourceforge.net/p/ijbswa/patches/</ulink>.
Then ask for peer review.
</para>
</listitem>
<para>
All formal documents are maintained in Docbook SGML and located in the
<computeroutput>doc/source/*</computeroutput> directory. You will need
- <ulink url="http://www.docbook.org">Docbook</ulink>, the Docbook
+ <ulink url="https://www.docbook.org/">Docbook</ulink>, the Docbook
DTD's and the Docbook modular stylesheets (or comparable alternatives),
and either <application>jade</application> or
<application>openjade</application> (recommended) installed in order to
process requires going from SGML to HTML to text to special formatting
required for the embedded comments. Some of this does not survive so
well. Especially some of the examples that are longer than 80 characters.
- The build process for this file outputs to <filename>config.new</filename>,
- which should be reviewed for errors and mis-formatting. Once satisfied
- that it is correct, then it should be hand copied to
- <filename>config</filename>.
</para>
<para>
Other, less formal documents (e.g. <filename>LICENSE</filename>) are
<para>
Packagers are encouraged to include this documentation. For those without
the ability to build the docs locally, text versions of each are kept in
- CVS. HTML versions are also being kept in CVS under
- <filename>doc/webserver/*</filename>. And PDF version are kept in
- <filename>doc/pdf/*</filename>.
+ Git. HTML versions are also being kept in Git under
+ <filename>doc/webserver/*</filename>.
</para>
<para>
Formal documents are built with the Makefile targets of
- <computeroutput>make dok</computeroutput>, or alternately
- <computeroutput>make redhat-dok</computeroutput>. If you have problems,
- try both. The build process uses the document SGML sources in
+ <computeroutput>make dok</computeroutput>.
+ The build process uses the document SGML sources in
<computeroutput>doc/source/*/*</computeroutput> to update all text files in
<computeroutput>doc/text/</computeroutput> and to update all HTML
documents in <computeroutput>doc/webserver/</computeroutput>.
</para>
<para>
Documentation writers should please make sure documents build
- successfully before committing to CVS, if possible.
+ successfully before committing to Git, if possible.
</para>
<para>
How do you update the webserver (i.e. the pages on privoxy.org)?
+ </para>
<orderedlist numeration="arabic">
<listitem><para>
First, build the docs by running <computeroutput>make
- dok</computeroutput> (or alternately <computeroutput>make
- redhat-dok</computeroutput>). For PDF docs, do <computeroutput>make
- dok-pdf</computeroutput>.
+ dok</computeroutput>.
</para></listitem>
<listitem><para>
Run <computeroutput>make webserver</computeroutput> which copies all
files from <computeroutput>doc/webserver</computeroutput> to the
- sourceforge webserver via scp.
+ sourceforge webserver via ssh.
</para></listitem>
</orderedlist>
- </para>
<para>
- Finished docs should be occasionally submitted to CVS
+ Finished docs should be occasionally submitted to Git
(<filename>doc/webserver/*/*.html</filename>) so that those without
the ability to build them locally, have access to them if needed.
This is especially important just prior to a new release! Please
Some common elements that you likely will use:
</para>
-<para>
<simplelist>
<member>
<emphasis><para></para></emphasis>, paragraph delimiter. Most
<emphasis><quote></quote></emphasis>, for, doh, quoting text.
</member>
</simplelist>
-</para>
<para>
Look at any of the existing docs for examples of all these and more.
</para>
<para>
- You might also find <quote><ulink
- url="http://opensource.bureau-cornavin.com/crash-course/index.html">Writing Documentation
- Using DocBook - A Crash Course</ulink></quote> useful.
+ You might also find
+ <!-- <quote><ulink url="http://opensource.bureau-cornavin.com/crash-course/index.html">
+ domain no longer exists so link to the wayback archive -->
+ <quote><ulink url="https://web.archive.org/web/20160315230758/http://opensource.bureau-cornavin.com/crash-course/index.html">
+ Writing Documentation Using DocBook - A Crash Course</ulink></quote> useful.
</para>
</sect2>
<para>
Here it is:
</para>
- <para>
<itemizedlist>
<listitem>
<para>
<para>
Tags delimiting a <emphasis>block</emphasis> of text (even small
blocks) should be on their own line. Like:
+ </para>
<literallayout>
<para>
Some text goes here.
</para>
- </literallayout>
+</literallayout>
+ <para>
Tags marking individual words, or few words, should be in-line:
+ </para>
<literallayout>
Just to <emphasis>emphasize</emphasis>, some text goes here.
- </literallayout>
- </para>
+</literallayout>
</listitem>
<listitem>
<para>
Tags should be nested and step indented for block text like: (except
in-line tags)
+ </para>
<literallayout>
<para>
<itemizedlist>
</para>
</itemizedlist>
</para>
- </literallayout>
+</literallayout>
+ <para>
This makes it easier to find the text amongst the tags ;-)
</para>
</listitem>
<listitem>
<para>
Our documents are available in differing formats. Right now, they
- are just plain text, HTML, and PDF, but others are always a
+ are just plain text and/or HTML, but others are always a
future possibility. Be careful with URLs (<ulink>), and avoid
this mistake:
</para>
</listitem>
</itemizedlist>
- </para>
</sect2>
custom entities are listed below. See any of the main docs for examples.
</para>
- <para>
<itemizedlist>
<listitem>
<para>
the finished doc at that point.
</para>
</listitem>
+
<listitem>
<para>
Commonly used <quote>internal entities</quote>:
</simplelist>
</listitem>
</itemizedlist>
- </para>
<para>
There are others in various places that are defined for a specific
purpose. Read the source!
understand why or what is being done. A reader may spend a lot
more time figuring out what is going on when a simple comment
or explanation would have prevented the extra research. Please
- help your brother IJB'ers out!</para>
+ help your fellow Privoxy developers out!</para>
<para>The comments will also help justify the intent of the code.
If the comment describes something different than what the code
<para><emphasis>Example:</emphasis></para>
<programlisting>
/* if page size greater than 1k ... */
-if ( page_length() > 1024 )
+if (page_length() > 1024)
{
... "block" the page up ...
}
/* if page size is small, send it in blocks */
-if ( page_length() > 1024 )
+if (page_length() > 1024)
{
... "block" the page up ...
}
/*********************************************************************
* This will stand out clearly in your code!
*********************************************************************/
-if ( this_variable == that_variable )
+if (this_variable == that_variable)
{
do_something_very_important();
}
/* unfortunately, this may not */
-if ( this_variable == that_variable )
+if (this_variable == that_variable)
{
do_something_very_important();
}
-if ( this_variable == that_variable ) /* this may not either */
+if (this_variable == that_variable) /* this may not either */
{
do_something_very_important();
}</programlisting>
* This will stand out clearly in your code,
* But the second example won't.
*********************************************************************/
-if ( this_variable == this_variable )
+if (this_variable == this_variable)
{
do_something_very_important();
}
-if ( this_variable == this_variable ) /*can you see me?*/
+if (this_variable == this_variable) /*can you see me?*/
{
do_something_very_important(); /*not easily*/
}
int urls_read = 0; /* # of urls read + rejected */
int urls_rejected = 0; /* # of urls rejected */
-if ( 1 == X )
+if (1 == X)
{
do_something_very_important();
}
<para><emphasis>Example:</emphasis></para>
<programlisting>
-if ( 1 == X )
+if (1 == X)
{
do_something_very_important();
...some long list of commands...
or:
-if ( 1 == X )
+if (1 == X)
{
do_something_very_important();
...some long list of commands...
-} /* -END- if ( 1 == X ) */
+} /* -END- if (1 == X) */
</programlisting>
</sect3>
<para><emphasis>Instead of:</emphasis></para>
- <para>
<programlisting>
int msiis5hack = 0; int msIis5Hack = 0;
</programlisting>
-</para>
<para><emphasis>Example:</emphasis></para>
<programlisting>
-int load_some_file( struct client_state *csp )</programlisting>
+int load_some_file(struct client_state *csp)</programlisting>
<para><emphasis>Instead of:</emphasis></para>
- <para>
<programlisting>
-int loadsomefile( struct client_state *csp )
-int loadSomeFile( struct client_state *csp )
+int loadsomefile(struct client_state *csp)
+int loadSomeFile(struct client_state *csp)
</programlisting>
-</para>
</sect3>
<para><emphasis>Example:</emphasis></para>
<programlisting>
-(.h) extern int load_aclfile( struct client_state *csp );
-(.c) int load_aclfile( struct client_state *csp )</programlisting>
+(.h) extern int load_aclfile(struct client_state *csp);
+(.c) int load_aclfile(struct client_state *csp)</programlisting>
- <para><emphasis>Instead of:</emphasis>
+ <para><emphasis>Instead of:</emphasis></para>
<programlisting>
-(.h) extern int load_aclfile( struct client_state * ); or
+(.h) extern int load_aclfile(struct client_state *); or
(.h) extern int load_aclfile();
-(.c) int load_aclfile( struct client_state *csp )
+(.c) int load_aclfile(struct client_state *csp)
</programlisting>
-</para>
</sect3>
<para><emphasis>Example:</emphasis></para>
<programlisting>
-(enumeration) : enum Boolean { FALSE, TRUE };
+(enumeration) : enum Boolean {FALSE, TRUE};
(#define) : #define DEFAULT_SIZE 100;</programlisting>
<para><emphasis>Note:</emphasis> We have a standard naming scheme for #defines
<para><emphasis>Instead of:</emphasis></para>
- <para>
<programlisting>
#define USE_IMG_LST 1 or
#define _USE_IMAGE_LIST 1 or
#define use_image_list 1 or
#define UseImageList 1
</programlisting>
-</para>
</sect3>
<para><emphasis>Example:</emphasis></para>
<programlisting>
-if ( this == that )
+if (this == that)
{
...
}</programlisting>
<para><emphasis>Instead of:</emphasis></para>
- <para>if ( this == that ) { ... }</para>
+ <para>if (this == that) { ... }</para>
<para>or</para>
- <para>if ( this == that ) { ... }</para>
+ <para>if (this == that) { ... }</para>
<para><emphasis>Note:</emphasis> In the special case that the if-statement is
inside a loop, and it is trivial, i.e. it tests for a
<para><emphasis>Example exception:</emphasis></para>
<programlisting>
-while ( more lines are read )
+while (more lines are read)
{
/* Please document what is/is not a comment line here */
- if ( it's a comment ) continue;
+ if (it's a comment) continue;
- do_something( line );
+ do_something(line);
}
</programlisting>
</sect3>
<para><emphasis>Example:</emphasis></para>
<programlisting>
-if ( this == that )
+if (this == that)
{
do_something();
do_something_else();
<para><emphasis>Instead of:</emphasis></para>
- <para>if ( this == that ) do_something(); do_something_else();</para>
+ <para>if (this == that) do_something(); do_something_else();</para>
<para>or</para>
- <para>if ( this == that ) do_something();</para>
+ <para>if (this == that) do_something();</para>
<para><emphasis>Note:</emphasis> The first example in "Instead of" will execute
in a manner other than that which the developer desired (per
<para><emphasis>Example:</emphasis></para>
<programlisting>
-structure->flag = ( condition );</programlisting>
+structure->flag = (condition);</programlisting>
<para><emphasis>Instead of:</emphasis></para>
- <para>if ( condition ) { structure->flag = 1; } else {
+ <para>if (condition) { structure->flag = 1; } else {
structure->flag = 0; }</para>
<para><emphasis>Note:</emphasis> The former is readable and concise. The later
int some_value = 0;
int another_value = 0;
int this_variable = 0;
-
-if ( this_variable == this_variable )
-
-first_value = old_value + ( ( some_value - another_value ) - whatever )
</programlisting>
</sect3>
int function1( ... )
{
...code...
- return( ret_code );
+ return(ret_code);
-} /* -END- function1 */
+} /* -END- function1 */
int function2( ... )
{
-} /* -END- function2 */
+} /* -END- function2 */
</programlisting>
<para><emphasis>Instead of:</emphasis></para>
- <para>int function1( ... ) { ...code... return( ret_code ); } int
+ <para>int function1( ... ) { ...code... return(ret_code); } int
function2( ... ) { }</para>
<para><emphasis>Note:</emphasis> Use 1 blank line before the closing brace and 2
int function1( ... )
{
- if ( 1 )
+ if (1)
{
- return( ALWAYS_TRUE );
+ return ALWAYS_TRUE;
}
else
{
- return( HOW_DID_YOU_GET_HERE );
+ return HOW_DID_YOU_GET_HERE;
}
- return( NEVER_GETS_HERE );
+ return NEVER_GETS_HERE;
}
</programlisting>
<para><emphasis>Example:</emphasis></para>
<programlisting>
-for ( size_t cnt = 0; cnt < block_list_length(); cnt++ )
+for (size_t cnt = 0; cnt < block_list_length(); cnt++)
{
....
}</programlisting>
<programlisting>
size_t len = block_list_length();
-for ( size_t cnt = 0; cnt < len; cnt++ )
+for (size_t cnt = 0; cnt < len; cnt++)
{
....
}</programlisting>
<para>This allows a developer to define a const pointer and call
your function. If your function does not have the const
keyword, we may not be able to use your function. Consider
- strcmp, if it were defined as: extern int strcmp( char *s1,
- char *s2 );</para>
+ strcmp, if it were defined as: extern int strcmp(char *s1,
+ char *s2);</para>
- <para>I could then not use it to compare argv's in main: int main(
- int argc, const char *argv[] ) { strcmp( argv[0], "privoxy"
- ); }</para>
+ <para>I could then not use it to compare argv's in main: int
+ main(int argc, const char *argv[]) { strcmp(argv[0], "privoxy");
+ }</para>
<para>Both these pointers are *const*! If the c runtime library
maintainers do it, we should too.</para>
<para>Most structures cannot fit onto a normal stack entry (i.e.
they are not 4 bytes or less). Aka, a function declaration
- like: int load_aclfile( struct client_state csp )</para>
+ like: int load_aclfile(struct client_state csp)</para>
<para>would not work. So, to be consistent, we should declare all
- prototypes with "pass by value": int load_aclfile( struct
- client_state *csp )</para>
+ prototypes with "pass by value": int load_aclfile(struct
+ client_state *csp)</para>
</sect3>
<para><emphasis>Exception:</emphasis></para>
- <para>
<programlisting>
/* This is not a local include, but requires a path element. */
#include <sys/fileName.h>
</programlisting>
-</para>
<para><emphasis>Note:</emphasis> Please! do not add "-I." to the Makefile
without a _very_ good reason. This duplicates the #include
<para><emphasis>Example:</emphasis></para>
<programlisting>
-switch( hash_string( cmd ) )
+switch (hash_string(cmd))
{
- case hash_actions_file :
+ case hash_actions_file:
... code ...
break;
- case hash_confdir :
+ case hash_confdir:
... code ...
break;
- default :
+ default:
log_error( ... );
... anomaly code goes here ...
continue; / break; / exit( 1 ); / etc ...
-} /* end switch( hash_string( cmd ) ) */</programlisting>
+} /* end switch (hash_string(cmd)) */</programlisting>
<para><emphasis>Note:</emphasis> If you already have a default condition, you
are obviously exempt from this point. Of note, most of the
necessary.</para>
- </sect3>
-
-
- <sect3 id="s39"><title>Use 'long' or 'short' Instead of
- 'int'</title>
-
- <para><emphasis>Explanation:</emphasis></para>
-
- <para>On 32-bit platforms, int usually has the range of long. On
- 16-bit platforms, int has the range of short.</para>
-
- <para><emphasis>Status:</emphasis> open-to-debate. In the case of most FSF
- projects (including X/GNU-Emacs), there are typedefs to int4,
- int8, int16, (or equivalence ... I forget the exact typedefs
- now). Should we add these to IJB now that we have a "configure"
- script?</para>
-
-
</sect3>
<para><emphasis>Example:</emphasis></para>
<programlisting>
-int load_re_filterfile( struct client_state *csp ) { ... }
-static void unload_re_filterfile( void *f ) { ... }</programlisting>
+int load_re_filterfile(struct client_state *csp) { ... }
+static void unload_re_filterfile(void *f) { ... }</programlisting>
<para><emphasis>Exceptions:</emphasis></para>
<sect3 id="s45"><title>"Uncertain" new code and/or changes to
- existing code, use FIXME or XXX</title>
+ existing code, use XXX</title>
<para><emphasis>Explanation:</emphasis></para>
your changes, but are not *quite* sure of the repercussions,
add this:</para>
- <para>/* FIXME: this code has a logic error on platform XYZ, *
+ <para>/* XXX: this code has a logic error on platform XYZ, *
attempting to fix */ #ifdef PLATFORM ...changed code here...
#endif</para>
<para>or:</para>
- <para>/* FIXME: I think the original author really meant this...
+ <para>/* XXX: I think the original author really meant this...
*/ ...changed code here...</para>
<para>or:</para>
- <para>/* FIXME: new code that *may* break something else... */
+ <para>/* XXX: new code that *may* break something else... */
...new code here...</para>
<para><emphasis>Note:</emphasis> If you make it clear that this may or may not
<para><emphasis>Example for file comments:</emphasis></para>
<programlisting>
-const char FILENAME_rcs[] = "$I<!-- Break CVS Substitution -->d$";
/*********************************************************************
*
- * File : $S<!-- Break CVS Substitution -->ource$
+ * File : $Source
*
* Purpose : (Fill me in with a good description!)
*
* Copyright : Written by and Copyright (C) 2001-2009
- * the Privoxy team. http://www.privoxy.org/
+ * the Privoxy team. https://www.privoxy.org/
*
* This program is free software; you can redistribute it
* and/or modify it under the terms of the GNU General
</programlisting>
<para><emphasis>Note:</emphasis> This declares the rcs variables that should be
- added to the "show-proxy-args" page. If this is a brand new
+ added to the "show-version" page. If this is a brand new
creation by you, you are free to change the "Copyright" section
to represent the rights you wish to maintain.</para>
<programlisting>
#ifndef _FILENAME_H
#define _FILENAME_H
-#define FILENAME_H_VERSION "$I<!-- Break CVS Substitution -->d$"
/*********************************************************************
*
- * File : $S<!-- Break CVS Substitution -->ource$
+ * File : $Source
*
* Purpose : (Fill me in with a good description!)
*
* Copyright : Written by and Copyright (C) 2001-2009
- * the Privoxy team. http://www.privoxy.org/
+ * the Privoxy team. https://www.privoxy.org/
*
* This program is free software; you can redistribute it
* and/or modify it under the terms of the GNU General
* Returns : 0 => Ok, everything else is an error.
*
*********************************************************************/
-int FUNCTION_NAME( void *param1, const char *x )
+int FUNCTION_NAME(void *param1, const char *x)
{
...
- return( 0 );
+ return 0;
}
</programlisting>
<sect2 id="testing-plan"><title>Testplan for releases</title>
<para>
Explain release numbers. major, minor. developer releases. etc.
-
+ </para>
<orderedlist numeration="arabic">
<listitem><para>
Remove any existing rpm with rpm -e
</para></listitem>
<listitem><para>
Remove any file that was left over. This includes (but is not limited to)
+ </para>
<itemizedlist>
<listitem><para>/var/log/privoxy</para></listitem>
<listitem><para>/etc/privoxy</para></listitem>
<listitem><para>/etc/init.d/privoxy</para></listitem>
<listitem><para>/usr/doc/privoxy*</para></listitem>
</itemizedlist>
-</para></listitem>
+ </listitem>
<listitem><para>
Install the rpm. Any error messages?
</para></listitem>
<listitem><para>Start browsing. Does <application>Privoxy</application> work? Logfile written?</para></listitem>
<listitem><para>Remove the rpm. Any error messages? All files removed?</para></listitem>
</orderedlist>
-</para>
</sect2>
+ <!-- XXX: Document how to write test reports and where to send them -->
<!-- ~~~~~ New section ~~~~~ -->
- <sect2 id="testing-report"><title>Test reports</title>
- <para>
-Please submit test reports only with the <ulink url="http://sourceforge.net/tracker/?func=add&group_id=11118&atid=395005">test form</ulink>
-at sourceforge. Three simple steps:
- <itemizedlist>
-
- <listitem><para>Select category: the distribution you test on.</para></listitem>
- <listitem><para>Select group: the version of <application>Privoxy</application> that we are about to release.</para></listitem>
- <listitem><para>Fill the Summary and Detailed Description with something
- intelligent (keep it short and precise).</para>
- </listitem>
- </itemizedlist>
- Do not mail to the mailing list (we cannot keep track on issues there).
- </para>
+ <sect2 id="fuzzing"><title>Fuzzing Privoxy</title>
+ <para>
+ To make fuzzing more convenient, Privoxy can be configured
+ with --enable-fuzz which will result in the --fuzz option
+ becoming available.
+ </para>
+ <para>
+ Example (tested on ElectroBSD):
+ </para>
+ <programlisting>
+# Compile Privoxy with instrumentation for afl
+$ export CC=afl-clang
+$ export CFLAGS="-fsanitize=address -ggdb"
+$ export CPPFLAGS=-I/usr/local/include/
+$ export LDFLAGS="-fsanitize=address -L/usr/local/lib"
+$ export AFL_USE_ASAN=1
+$ export AFL_HARDEN=1
+$ ./configure --with-debug --enable-extended-host-patterns --enable-accept-filter --enable-no-gifs --enable-compression --enable-strptime-sanity-checks --enable-external-filters --enable-fuzz
+
+$ ./privoxy --fuzz
+Privoxy version 3.0.24 (http://www.privoxy.org/)
+Usage: ./privoxy [--config-test] [--chroot] [--help] [--no-daemon] [--pidfile pidfile] [--pre-chroot-nslookup hostname] [--user user[.group]] [--version] [configfile]
+ ./privoxy --fuzz fuzz-mode ./path/to/fuzzed/input [--stfu]
+
+Supported fuzz modes and the expected input:
+ action: Text to parse as action file.
+ client-request: Client request to parse. Currently incomplete
+ client-header: Client header to parse.
+ chunked-transfer-encoding: Chunk-encoded data to dechunk.
+ deflate: deflate-compressed data to decompress.
+ filter: Text to parse as filter file.
+ gif: gif to deanimate.
+ gzip: gzip-compressed data to decompress.
+ pcrs-substitute: A pcrs-substitute to compile. Not a whole pcrs job! Example: Bla $1 bla C $3 blah.
+ server-header: Server header to parse.
+ server-response: Server response to parse.
+
+The following fuzz modes read data from stdin if the 'file' is '-'
+ client-request
+ client-header
+ chunked-transfer-encoding
+ deflate
+ gif
+ gzip
+ pcrs-substitute
+ server-header
+ server-response
+
+Aborting
+
+$ export ASAN_OPTIONS='abort_on_error=1'
+$ mkdir input output
+$ echo '$1 bla fasel $2' > input/pcrs
+$ afl-fuzz -i input -o output -m none ~/git/privoxy/privoxy --fuzz pcrs-substitute - --stfu
+
+$ cat >input/pcrs.txt
+FILTER: bla fasel
+s@(.{1})[432](\d+)@$1$2$hostname@UgisT
+
+$ afl-fuzz -i input/ -o output/ -f bla.filter -m none privoxy --fuzz filter bla.filter --stfu
+</programlisting>
</sect2>
-
</sect1>
<!-- ~~~~~ New section ~~~~~ -->
</para>
<para>
- The following programs are required to follow this process:
- <filename>ncftpput</filename> (ncftp), <filename>scp, ssh</filename> (ssh),
- <filename>gmake</filename> (GNU's version of make), autoconf, cvs.
+ The following programs are required to follow this process:
+ <filename>ssh</filename>,
+ <filename>gmake</filename> (GNU's version of make), autoconf, git,
+ a web browser.
</para>
<sect2 id="versionnumbers">
First you need to determine which version number the release will have.
<application>Privoxy</application> version numbers consist of three numbers,
separated by dots, like in X.Y.Z (e.g. 3.0.0), where:
+ </para>
<itemizedlist>
<listitem>
<para>
X, the version major, is rarely ever changed. It is increased by one if
turning a development branch into stable substantially changes the functionality,
user interface or configuration syntax. Majors 1 and 2 were
- <application>Junkbuster</application>, and 3 will be the first stable
+ <application>Junkbuster</application>, and 3 is the first stable
<application>Privoxy</application> release.
</para>
</listitem>
<listitem>
<para>
+ <!-- FIXME this is not the way it works anymore -->
Y, the version minor, represents the branch within the major version.
At any point in time, there are two branches being maintained:
The stable branch, with an even minor, say, 2N, in which no functionality is
<listitem>
<para>
Z, the point or sub version, represents a release of the software within a branch.
- It is therefore incremented immediately before each code freeze.
+ It is therefore incremented immediately after each software release.
+ <!-- FIXME this is not the way it works any more
In development branches, only the even point versions correspond to actual releases,
- while the odd ones denote the evolving state of the sources on CVS in between.
- It follows that Z is odd on CVS in development branches most of the time. There, it gets
+ while the odd ones denote the evolving state of the sources on Git in between.
+ It follows that Z is odd on Git in development branches most of the time. There, it gets
increased to an even number immediately before a code freeze, and is increased to an odd
number again immediately thereafter.
- This ensures that builds from CVS snapshots are easily distinguished from released versions.
+ This ensures that builds from Git snapshots are easily distinguished from released versions.
+ didn't Fabian get rid of the even=stable, odd=dev convention for release numbering? -->
The point version is reset to zero when the minor changes.
</para>
<para>
</para>
</listitem>
</itemizedlist>
- </para>
<para>
- In summary, the main CVS trunk is the development branch where new
+ In summary, the main Git trunk is the development branch where new
features are being worked on for the next stable series. This should
almost always be where the most activity takes place. There is always at
least one stable branch from the trunk, e.g now it is
<para>
Developers should remember too that if they commit a bugfix to the stable
branch, this will more than likely require a separate submission to the
- main trunk, since these are separate development trees within CVS. If you
+ main trunk, since these are separate development trees within Git. If you
are working on both, then this would require at least two separate check
outs (i.e main trunk, <emphasis>and</emphasis> the stable release branch,
which is <literal>v_3_0_branch</literal> at the moment).
</sect2>
<sect2 id="beforerelease">
- <title>Before the Release: Freeze</title>
+ <title>Before the Release</title>
<para>
The following <emphasis>must be done by one of the
developers</emphasis> prior to each new release.
</para>
- <para>
- <itemizedlist>
- <listitem>
- <para>
+ <itemizedlist>
+ <listitem>
+ <para>
Make sure that everybody who has worked on the code in the last
couple of days has had a chance to yell <quote>no!</quote> in case
they have pending changes/fixes in their pipelines. Announce the
freeze so that nobody will interfere with last minute changes.
- </para>
+ </para>
</listitem>
<listitem>
<para>
- Increment the version number (point from odd to even in development
- branches!) in <filename>configure.in</filename>. (RPM spec files
- will need to be incremented as well.)
+ Update the code status (CODE_STATUS="xxx") in configure.in to one of
+ "alpha", "beta" or "stable".
</para>
</listitem>
<listitem>
<para>
- If <filename>default.action</filename> has changed since last
- release (i.e. software release or standalone actions file release),
- bump up its version info to A.B in this line:
+ Rebuild configure and GNUMakefile to make sure the updated values are being used.
</para>
+
+ <programlisting>
+$ autoheader && autoconf # rebuild configure
+$ ./configure # rebuild GNUmakefile
+</programlisting>
+ </listitem>
+ <listitem>
<para>
+ <command>make dok-release</command> to update the sgml documentation source files.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ If action file processing has changed and is not backward-compatible,
+ make sure the "for-privoxy-version=x.y.z" minimum version number in
+ default.action.master has been updated:
+ </para>
<programlisting>
- {+add-header{X-Actions-File-Version: A.B} -filter -no-popups}
+{{settings}}
+#############################################################################
+#MASTER# COMMENT: The minimum Privoxy version:
+for-privoxy-version=3.0.11
</programlisting>
+ </listitem>
+ <listitem>
+ <para>
+ Create the change log:
</para>
+ <programlisting>
+ $ git tag
+ # to see the tags
+ $ git log [last release tag]..HEAD > /tmp/log
+ # get the commit log since the last release
+ $ utils/makeChangeLog /tmp/log > /tmp/change.log
+ # reformat the commit log
+</programlisting>
+ <para>
+ Edit <filename>/tmp/change.log</filename> to remove trivial
+ changes and group the changes under general headings like:
+ </para>
+ <programlisting>
+- Bug fixes:
+- Action file improvements:
+- Filter file improvements:
+- General improvements:
+- Documentation improvements:
+- Build system improvements:
+- Code cleanups:
+- Privoxy-Log-Parser:
+- Privoxy-Regression-Test:
+</programlisting>
+ <para>
+ Add the contents of <filename>/tmp/change.log</filename> to the
+ start of <filename>ChangeLog</filename> and re-create
+ <filename>doc/source/changelog.sgml</filename>:
+ </para>
+ <programlisting>
+ $ utils/changelog2doc.pl /tmp/change.log >| doc/source/changelog.sgml
+</programlisting>
+ </listitem>
+ <listitem>
<para>
- Then change the version info in doc/webserver/actions/index.php,
- line: '$required_actions_file_version = "A.B";'
+ All developers should look at the <filename>ChangeLog</filename> and
+ make sure noteworthy changes are referenced.
</para>
</listitem>
<listitem>
<para>
- All documentation should be rebuild after the version bump.
- Finished docs should be then be committed to CVS (for those
+ All documentation should be rebuilt:
+ <programlisting>
+ $ make man
+ $ make dok
+ $ make dok-man
+ $ make dok-tidy
+ $ make config-file
+</programlisting>
+ Finished docs should be then be committed to Git (for those
without the ability to build these). Some docs may require
rather obscure processing tools. <filename>config</filename>,
- the man page (and the html version of the man page), and the PDF docs
- fall in this category. REAMDE, the man page, AUTHORS, and config
- should all also be committed to CVS for other packagers. The
- formal docs should be uploaded to the webserver. See the
- Section "Updating the webserver" in this manual for details.
+ the man page (and the html version of the man page)
+ fall in this category. README, the man page, AUTHORS, and config
+ should all also be committed to Git for other packagers. The
+ formal docs should be uploaded to the webserver. See the section
+ <ulink url="webserver-update.html">"Updating the webserver"</ulink>
+ in this manual for details.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ <emphasis>Commit all files that were changed in the above steps!</emphasis>
</para>
</listitem>
<listitem>
(this is in addition to the main <citetitle>User Manual</citetitle>
link from the main page since we need to keep manuals for various
versions available). The CGI pages will link to something like
- <literal>http://privoxy.org/$(VERSION)/user-manual/</literal>. This
+ <literal>https://www.privoxy.org/$(VERSION)/user-manual/</literal>. This
will need to be updated for each new release. There is no Makefile
target for this at this time!!! It needs to be done manually.
</para>
</listitem>
<listitem>
<para>
- All developers should look at the <filename>ChangeLog</filename> and
- make sure noteworthy changes are referenced.
- </para>
- </listitem>
- <listitem>
- <para>
- <emphasis>Commit all files that were changed in the above steps!</emphasis>
- </para>
- </listitem>
- <listitem>
- <para>
- Tag all files in CVS with the version number with
- <quote><command>cvs tag v_X_Y_Z</command></quote>.
+ Tag all files in Git with the version number with
+ <quote><command>git tag v_X_Y_Z</command></quote>.
Don't use vX_Y_Z, ver_X_Y_Z, v_X.Y.Z (won't work) etc.
</para>
</listitem>
- <listitem>
- <para>
- If the release was in a development branch, increase the point version
- from even to odd (X.Y.(Z+1)) again in <filename>configure.in</filename> and
- commit your change.
- </para>
- </listitem>
<listitem>
<para>
On the webserver, copy the user manual to a new top-level directory
</para>
</listitem>
</itemizedlist>
- </para>
</sect2>
<sect2 id="therelease">
<para>
For <emphasis>all</emphasis> types of packages, including the source tarball,
<emphasis>you must make sure that you build from clean sources by exporting
- the right version from CVS into an empty directory</emphasis> (just press return when
+ the right version from Git into an empty directory</emphasis> (just press return when
asked for a password):
</para>
- <para>
<programlisting>
mkdir dist # delete or choose different name if it already exists
cd dist
- cvs -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa login
- cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current
+ git clone https://www.privoxy.org/git/privoxy.git
+ cd privoxy
+ git checkout v_X_Y_Z
</programlisting>
- </para>
<para>
<emphasis>Do NOT change</emphasis> a single bit, including, but not limited to
- version information after export from CVS. This is to make sure that
+ version information after export from Git. This is to make sure that
all release packages, and with them, all future bug reports, are based
on exactly the same code.
</para>
Please keep these general guidelines in mind when putting together
your package. These apply to <emphasis>all</emphasis> platforms!
</para>
- <para>
<itemizedlist>
<listitem>
<para>
interest (and possibly renamed to <filename>index.html</filename>).
This should be one level up from the manuals. There is a link also
on this page to an HTMLized version of the man page. To avoid 404 for
- this, it is in CVS as
+ this, it is in Git as
<filename>doc/webserver/man-page/privoxy-man-page.html</filename>,
and should be included along with the manuals. There is also a
css stylesheets that can be included for better presentation:
</listitem>
</itemizedlist>
- </para>
</sect3>
<sect3 id="newrelease-tarball"><title>Source Tarball</title>
- First, <emphasis>make sure that you have freshly exported the right
+ <para>
+ First, <emphasis>make sure that you have freshly exported the right
version into an empty directory</emphasis>. (See "Building and releasing
packages" above). Then run:
- </para>
- <para>
- <programlisting>
+ </para>
+ <programlisting>
cd current
autoheader && autoconf && ./configure
</programlisting>
- </para>
- <para>
- Then do:
- </para>
- <para>
- <programlisting>
+ <para>
+ Then do:
+ </para>
+ <programlisting>
make tarball-dist
</programlisting>
- </para>
- <para>
- To upload the package to Sourceforge, simply issue
- </para>
- <para>
- <programlisting>
+ <para>
+ To upload the package to Sourceforge, simply issue
+ </para>
+ <programlisting>
make tarball-upload
</programlisting>
- </para>
- <para>
- Go to the displayed URL and release the file publicly on Sourceforge.
+ <para>
+ Go to the displayed URL and release the file publicly on Sourceforge.
For the change log field, use the relevant section of the
<filename>ChangeLog</filename> file.
</para>
</sect3>
<sect3 id="newrelease-rpm"><title>SuSE, Conectiva or Red Hat RPM</title>
+ <para>
In following text, replace <replaceable class="parameter">dist</replaceable>
with either <quote>rh</quote> for Red Hat or <quote>suse</quote> for SuSE.
- </para>
- First, <emphasis>make sure that you have freshly exported the right
+ </para>
+ <para>
+ First, <emphasis>make sure that you have freshly exported the right
version into an empty directory</emphasis>. (See "Building and releasing
packages" above).
- </para>
- As the only exception to not changing anything after export from CVS,
+ </para>
+ <para>
+ As the only exception to not changing anything after export from Git,
now examine the file <filename>privoxy-</filename><replaceable class="parameter">dist</replaceable><filename>.spec</filename>
and make sure that the version information and the RPM release number are
correct. The RPM release numbers for each version start at one. Hence it must
be reset to one if this is the first RPM for
<replaceable class="parameter">dist</replaceable> which is built from version
X.Y.Z. Check the
- <ulink url="http://sourceforge.net/project/showfiles.php?group_id=11118">file
+ <ulink url="https://sourceforge.net/projects/ijbswa/files/">file
list</ulink> if unsure. Else, it must be set to the highest already available RPM
release number for that version plus one.
- </para>
+ </para>
+ <para>
Then run:
- </para>
- <para>
- <programlisting>
+ </para>
+ <programlisting>
cd current
autoheader && autoconf && ./configure
</programlisting>
- </para>
- <para>
- Then do
- </para>
- <para>
- <programlisting>
+ <para>
+ Then do
+ </para>
+ <programlisting>
make <replaceable class="parameter">dist</replaceable>-dist
</programlisting>
- </para>
- <para>
- To upload the package to Sourceforge, simply issue
- </para>
- <para>
- <programlisting>
+ <para>
+ To upload the package to Sourceforge, simply issue
+ </para>
+ <programlisting>
make <replaceable class="parameter">dist</replaceable>-upload <replaceable class="parameter">rpm_packagerev</replaceable>
</programlisting>
- </para>
- <para>
+ <para>
where <replaceable class="parameter">rpm_packagerev</replaceable> is the
RPM release number as determined above.
- Go to the displayed URL and release the file publicly on Sourceforge.
+ Go to the displayed URL and release the file publicly on Sourceforge.
Use the release notes and change log from the source tarball package.
</para>
</sect3>
- <sect3 id="newrelease-os2"><title>OS/2</title>
- <para>
- First, <emphasis>make sure that you have freshly exported the right
- version into an empty directory</emphasis>. (See "Building and releasing
- packages" above). Then get the OS/2 Setup module:
- </para>
- <para>
- <programlisting>
- cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co os2setup
-</programlisting>
- </para>
- <para>
- You will need a mix of development tools.
- The main compilation takes place with IBM Visual Age C++.
- Some ancillary work takes place with GNU tools, available from
- various sources like hobbes.nmsu.edu.
- Specificially, you will need <filename>autoheader</filename>,
- <filename>autoconf</filename> and <filename>sh</filename> tools.
- The packaging takes place with WarpIN, available from various sources, including
- its home page: <ulink url="http://www.xworkplace.org/">xworkplace</ulink>.
- </para>
- <para>
- Change directory to the <filename>os2setup</filename> directory.
- Edit the os2build.cmd file to set the final executable filename.
- For example,
- </para>
- <para>
- <programlisting>
- installExeName='privoxyos2_setup_X.Y.Z.exe'
-</programlisting>
- </para>
- <para>
- Next, edit the <filename>IJB.wis</filename> file so the release number matches
- in the <filename>PACKAGEID</filename> section:
- </para>
- <para>
- <programlisting>
- PACKAGEID="Privoxy Team\Privoxy\Privoxy Package\X\Y\Z"
-</programlisting>
- </para>
- <para>
- You're now ready to build. Run:
- </para>
- <para>
- <programlisting>
- os2build
-</programlisting>
- </para>
- <para>
- You will find the WarpIN-installable executable in the
- <filename>./files</filename> directory. Upload this anonymously to
- <filename>uploads.sourceforge.net/incoming</filename>, create a release
- for it, and you're done. Use the release notes and Change Log from the
- source tarball package.
- </para>
- </sect3>
-
<sect3 id="newrelease-solaris"><title>Solaris</title>
<para>
- Login to Sourceforge's compilefarm via ssh:
- </para>
- <para>
- <programlisting>
+ Login to Sourceforge's compilefarm via ssh:
+ </para>
+ <programlisting>
ssh cf.sourceforge.net
</programlisting>
- </para>
- <para>
- Choose the right operating system (not the Debian one).
+ <para>
+ Choose the right operating system (not the Debian one).
When logged in, <emphasis>make sure that you have freshly exported the right
version into an empty directory</emphasis>. (See "Building and releasing
packages" above). Then run:
- </para>
- <para>
- <programlisting>
+ </para>
+ <programlisting>
cd current
autoheader && autoconf && ./configure
</programlisting>
- </para>
- <para>
- Then run
- </para>
- <para>
- <programlisting>
+ <para>
+ Then run
+ </para>
+ <programlisting>
gmake solaris-dist
</programlisting>
- </para>
- <para>
- which creates a gzip'ed tar archive. Sadly, you cannot use <command>make
- solaris-upload</command> on the Sourceforge machine (no ncftpput). You now have
- to manually upload the archive to Sourceforge's ftp server and release
- the file publicly. Use the release notes and Change Log from the
+ <para>
+ which creates a gzip'ed tar archive. Sadly, you cannot use <command>make
+ solaris-upload</command> on the Sourceforge machine (no ncftpput). You now have
+ to manually upload the archive to Sourceforge's ftp server and release
+ the file publicly. Use the release notes and Change Log from the
source tarball package.
- </para>
+ </para>
</sect3>
- <sect3 id="newrelease-windows"><title>Windows</title>
+ <sect3 id="NEWRELEASE-WINDOWS"><title>Windows</title>
+ <!-- so annoying: docbook generated ids are UPPERCASE so
+ links to "whatever.html#idtag" DO NOT WORK!!
+ They have to be "whatever.html#IDTAG".
+ So be consistent and use uppercase on the definition.
+ -->
<para>
- You should ensure you have the latest version of Cygwin (from
- <ulink url="http://www.cygwin.com/">http://www.cygwin.com/</ulink>).
- Run the following commands from within a Cygwin bash shell.
+ Note that the docbook generated files might need some hand editing,
+ so the Windows build makefile does not rebuild the docs.
</para>
+
<para>
- First, <emphasis>make sure that you have freshly exported the right
+ First, <emphasis>make sure that you have freshly exported the right
version into an empty directory</emphasis>. (See "Building and releasing
- packages" above). Then get the Windows setup module:
- </para>
- <para>
- <programlisting>
- cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co winsetup
-</programlisting>
+ packages" above).
+ <!-- XXX ??? are we still basing releases off a tarball???
+ -->
</para>
<para>
Then you can build the package. This is fully automated, and is
- controlled by <filename>winsetup/GNUmakefile</filename>.
+ controlled by <filename>windows/GNUmakefile</filename>.
All you need to do is:
</para>
- <para>
<programlisting>
- cd winsetup
+ cd windows
make
</programlisting>
- </para>
<para>
Now you can manually rename <filename>privoxy_setup.exe</filename> to
- <filename>privoxy_setup_X_Y_Z.exe</filename>, and upload it to
- SourceForge. When releasing the package on SourceForge, use the release notes
+ <filename>privoxy_setup_X.Y.Z.exe</filename>, and the <filename>build</filename>
+ directory to <filename>privoxy_X.Y.Z</filename>.
+ Create a .zip file of the newly renamed <filename>privoxy_X.Y.Z</filename> directory,
+ GPG sign the installer and zip file,
+ </para>
+ <programlisting>
+ $ gpg --armor --detach --sign <filename>privoxy_setup_X.Y.Z.exe</filename>
+ $ gpg --armor --detach --sign <filename>privoxy_X.Y.Z.zip</filename>
+</programlisting>
+ <para>
+ and upload the files to SourceForge.
+ </para>
+
+ <para>
+ When releasing the package on SourceForge, use the release notes
and Change Log from the source tarball package.
</para>
</sect3>
entry to <filename>debian/changelog</filename>, if it is not
already there, for example by running:
</para>
- <para>
<programlisting>
debchange -v &p-version;-&p-status;-1 "New upstream version"
</programlisting>
- </para>
<para>
Then, run:
</para>
- <para>
<programlisting>
dpkg-buildpackage -rfakeroot -us -uc -b
</programlisting>
- </para>
<para>
This will create
<filename>../privoxy_&p-version;-&p-status;-1_i386.deb</filename>
which can be uploaded. To upload the package to Sourceforge, simply
- issue
+ issue
</para>
- <para>
<programlisting>
make debian-upload
</programlisting>
- </para>
</sect3>
<sect3 id="newrelease-macosx"><title>Mac OS X</title>
<para>
- First, <emphasis>make sure that you have freshly exported the right
+ First, <emphasis>make sure that you have freshly exported the right
version into an empty directory</emphasis>. (See "Building and releasing
- packages" above). Then get the Mac OS X setup module:
- </para>
- <para>
- <programlisting>
+ packages" above).
+ </para>
+ <para>
+ There are three modules available in the CVS repository backups for use on Mac
+ OS X, though technically only two of them generate a release (the other
+ can be used to install from source).
+ </para>
+ <sect4 id="OS-X-OSXPackageBuilder-module">
+ <title>OSXPackageBuilder module (Documentation out of date)</title>
+ <para>
+ The OSXPackageBuilder module generates OS X installer packages
+ supporting all Macs running OS X 10.4 and above. Obtain it from CVS as
+ follows into a folder parallel to the exported privoxy source:
+ </para>
+ <programlisting>
+ cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co OSXPackageBuilder
+</programlisting>
+ <para>
+ The module contains complete instructions on its usage in the file
+ <filename>OS X Package Builder HOWTO.txt</filename>.
+ </para>
+ <para>
+ Once the package(s) have been generated, you can then upload them
+ directly to the Files section of the Sourceforge project in the
+ Macintosh (OS X) folder. Each new version release of Privoxy should
+ have a new subfolder created in which to store its files. Please
+ ensure that the folder contains a readme file that makes it clear
+ which package is for whichversion of OS X.
+ </para>
+ </sect4>
+ <sect4 id="OS-X-osxsetup-module">
+ <title>osxsetup module (DEPRECATED) (Documentation out of date)</title>
+ <para>
+ <emphasis>This module is deprecated since the installer it generates
+ places all Privoxy files in one folder in a non-standard location, and
+ supports only Intel Macs running OS X 10.6 or higher.</emphasis>
+ </para>
+ <para>
+ Check out the module from CVS as follows into a folder parallel to the
+ exported privoxy source:
+ </para>
+ <programlisting>
cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co osxsetup
</programlisting>
- </para>
- <para>
- Then run:
- </para>
- <para>
- <programlisting>
+ <para>
+ Then run:
+ </para>
+ <programlisting>
cd osxsetup
build
</programlisting>
- </para>
- <para>
- This will run <filename>autoheader</filename>, <filename>autoconf</filename> and
- <filename>configure</filename> as well as <filename>make</filename>.
- Finally, it will copy over the necessary files to the ./osxsetup/files directory
- for further processing by <filename>PackageMaker</filename>.
- </para>
- <para>
- Bring up PackageMaker with the PrivoxyPackage.pmsp definition file, modify the package
- name to match the release, and hit the "Create package" button.
- If you specify ./Privoxy.pkg as the output package name, you can then create
- the distributable zip file with the command:
- </para>
- <para>
- <programlisting>
+ <para>
+ This will run <filename>autoheader</filename>, <filename>autoconf</filename>
+ and <filename>configure</filename> as well as <filename>make</filename>.
+ Finally, it will copy over the necessary files to the ./osxsetup/files
+ directory for further processing by <filename>PackageMaker</filename>.
+ </para>
+ <para>
+ Bring up PackageMaker with the PrivoxyPackage.pmsp definition file,
+ modify the package name to match the release, and hit the "Create
+ package" button. If you specify ./Privoxy.pkg as the output package
+ name, you can then create the distributable zip file with the command:
+ </para>
+ <programlisting>
zip -r privoxyosx_setup_x.y.z.zip Privoxy.pkg
</programlisting>
- </para>
- <para>
- You can then upload <filename>privoxyosx_setup_x.y.z.zip</filename> anonymously to
- <filename>uploads.sourceforge.net/incoming</filename>,
- create a release for it, and you're done. Use the release notes
- and Change Log from the source tarball package.
- </para>
- </sect3>
-
- <sect3 id="newrelease-freebsd"><title>FreeBSD</title>
- <para>
- Login to Sourceforge's compile-farm via ssh:
- </para>
- <para>
- <programlisting>
- ssh cf.sourceforge.net
-</programlisting>
- </para>
- <para>
- Choose the right operating system.
- When logged in, <emphasis>make sure that you have freshly exported the right
- version into an empty directory</emphasis>. (See "Building and releasing
- packages" above). Then run:
- </para>
- <para>
- <programlisting>
- cd current
- autoheader && autoconf && ./configure
-</programlisting>
- </para>
- <para>
- Then run:
- </para>
- <para>
- <programlisting>
- gmake freebsd-dist
-</programlisting>
- </para>
- <para>
- which creates a gzip'ed tar archive. Sadly, you cannot use <command>make
- freebsd-upload</command> on the Sourceforge machine (no ncftpput). You now have
- to manually upload the archive to Sourceforge's ftp server and release
- the file publicly. Use the release notes and Change Log from the
- source tarball package.
- </para>
- </sect3>
-
- <sect3 id="newrelease-hpux"><title>HP-UX 11</title>
- <para>
- First, <emphasis>make sure that you have freshly exported the right
- version into an empty directory</emphasis>. (See "Building and releasing
- packages" above). Then run:
- </para>
- <para>
- <programlisting>
- cd current
- autoheader && autoconf && ./configure
-</programlisting>
- </para>
- <para>
- Then do FIXME.
- </para>
- </sect3>
-
- <sect3 id="newrelease-amiga"><title>Amiga OS</title>
- <para>
- First, <emphasis>make sure that you have freshly exported the right
- version into an empty directory</emphasis>. (See "Building and releasing
- packages" above). Then run:
- </para>
- <para>
- <programlisting>
- cd current
- autoheader && autoconf && ./configure
+ <para>
+ You can then upload this file directly to the Files section of the
+ Sourceforge project in the Macintosh (OS X) folder. Each new version
+ release of Privoxy should have a new subfolder created in which to
+ store its files.
+ Please ensure that the folder contains a readme file that makes it
+ clear which version(s) of OS X the package supports.
+ </para>
+ </sect4>
+ <sect4 id="OS-X-macsetup-module">
+ <title>macsetup module (Documentation out of date)</title>
+ <para>
+ The macsetup module is ideal if you wish to build and install Privoxy
+ from source on a single machine.
+ </para>
+ <para>
+ Check out the module from CVS as follows into a folder parallel to the
+ exported privoxy source:
+ </para>
+ <programlisting>
+ cvs -z3 -d:pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa co macsetup
</programlisting>
- </para>
- <para>
- Then do FIXME.
- </para>
+ <para>
+ The module contains complete instructions on its usage in its
+ <filename>README</filename> file. The end result will be the
+ exported version of Privoxy installed on the build machine.
+ </para>
+ </sect4>
</sect3>
- <sect3 id="newrelease-aix"><title>AIX</title>
+ <sect3 id="newrelease-freebsd"><title>FreeBSD</title>
<para>
- Login to Sourceforge's compilefarm via ssh:
- </para>
- <para>
- <programlisting>
- ssh cf.sourceforge.net
-</programlisting>
- </para>
- <para>
- Choose the right operating system.
- When logged in, <emphasis>make sure that you have freshly exported the right
- version into an empty directory</emphasis>. (See "Building and releasing
- packages" above). Then run:
- </para>
- <para>
- <programlisting>
- cd current
- autoheader && autoconf && ./configure
-</programlisting>
- </para>
- <para>
- Then run:
- </para>
- <para>
- <programlisting>
- make aix-dist
-</programlisting>
- </para>
- <para>
- which creates a gzip'ed tar archive. Sadly, you cannot use <command>make
- aix-upload</command> on the Sourceforge machine (no ncftpput). You now have
- to manually upload the archive to Sourceforge's ftp server and release
- the file publicly. Use the release notes and Change Log from the
- source tarball package.
- </para>
+ Update the www/privoxy port and submit a diff upstream.
+ For details see the <ulink url="https://www.freebsd.org/doc/en_US.ISO8859-1/books/porters-handbook/">FreeBSD Porter's Handbook</ulink>.
+ </para>
</sect3>
</sect2>
to SourceForge, and go through the release steps. The upload
is done via FTP:
</para>
- <para>
- <itemizedlist>
- <listitem>
- <para>
- Upload to: <ulink url="ftp://upload.sourceforge.net/incoming">ftp://upload.sourceforge.net/incoming</ulink>
- </para>
- </listitem>
- <listitem>
- <para>
- user: <literal>anonymous</literal>
- </para>
- </listitem>
- <listitem>
- <para>
- password: <literal>ijbswa-developers@lists.sourceforge.net</literal>
- </para>
- </listitem>
- </itemizedlist>
- </para>
+ <itemizedlist>
+ <listitem>
+ <para>
+ Upload to: <ulink url="ftp://upload.sourceforge.net/incoming">ftp://upload.sourceforge.net/incoming</ulink>
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ user: <literal>anonymous</literal>
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ password: <literal>ijbswa-developers@lists.sourceforge.net</literal>
+ </para>
+ </listitem>
+ </itemizedlist>
<para>
Or use the <command>make</command> targets as described above.
</para>
<para>
- Once this done go to <ulink
- url="https://sourceforge.net/project/admin/editpackages.php?group_id=11118"
- >https://sourceforge.net/project/admin/editpackages.php?group_id=11118</ulink>,
+ Once this done go to
+ <ulink url="https://sourceforge.net/project/admin/editpackages.php?group_id=11118">
+ https://sourceforge.net/project/admin/editpackages.php?group_id=11118</ulink>,
making sure you are logged in. Find your target platform in the
second column, and click <literal>Add Release</literal>. You will
then need to create a new release for your package, using the format
<title>After the Release</title>
<para>
When all (or: most of the) packages have been uploaded and made available,
- send an email to the <ulink url="mailto:ijbswa-announce@lists.sourceforge.net">announce
- mailing list</ulink>, Subject: "Version X.Y.Z available for download". Be sure to
+ send an email to the
+ <ulink url="mailto:privoxy-announce@lists.privoxy.org">announce mailing
+ list</ulink>, Subject: "Version X.Y.Z available for download". Be sure to
include the
- <ulink url="http://sourceforge.net/project/showfiles.php?group_id=11118">download
- location</ulink>, the release notes and the Changelog. Also, post an
+ <ulink url="https://sourceforge.net/projects/ijbswa/files/">
+ download location</ulink>, the release notes and the Changelog. Also, post an
updated News item on the project page Sourceforge, and update the Home
page and docs linked from the Home page (see below). Other news sites
and release oriented sites, such as Freshmeat, should also be notified.
</para>
+ <para>
+ Then update the source code for the next version to be released:
+ </para>
+ <itemizedlist>
+ <listitem>
+ <para>
+ Increment the version number and change the code status to "UNRELEASED"
+ in <filename>configure.in</filename>
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Rebuild configure (<quote><command>autoheader && autoconf</command></quote>)
+ and GNUMakefile (<quote><command>./configure</command></quote>)
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ <quote><command>make dok-release</command></quote> to update the sgml documentation source files.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Commit all your changes.
+ </para>
+ </listitem>
+ </itemizedlist>
+
</sect2>
</sect1>
If you have changed anything in the stable-branch documentation source
SGML files, do:
</para>
- <para>
<programlisting>
- make dok dok-pdf # (or 'make redhat-dok dok-pdf' if 'make dok' doesn't work for you)
+ make dok
</programlisting>
- </para>
<para>
That will generate <filename>doc/webserver/user-manual</filename>,
<filename>doc/webserver/developer-manual</filename>,
<filename>doc/webserver/faq</filename>,
- <filename>doc/pdf/*.pdf</filename> and
<filename>doc/webserver/index.html</filename> automatically.
</para>
<para>
<filename>doc/webserver/man-page/privoxy-man-page.html</filename>
by running <quote><command>make man</command></quote>. (This is
a separate target due to dependencies on some obscure perl scripts
- [now in CVS, but not well tested]. See comments in <filename>GNUmakefile</filename>.)
+ [now in Git, but not well tested]. See comments in <filename>GNUmakefile</filename>.)
</para>
<para>
If you want to add new files to the webserver, create them locally in
create new directories under <filename>doc/webserver</filename>).
</para>
<para>
- Next, commit any changes from the above steps to CVS. All set?
+ Next, commit any changes from the above steps to Git. All set?
If these are docs in the stable branch, then do:
</para>
- <para>
<programlisting>
make webserver
</programlisting>
- </para>
<para>
- This will do the upload to <ulink url="http://www.privoxy.org/">the
- webserver</ulink> (www.privoxy.org) and ensure all files and directories
- there are group writable.
+ This will do the upload to the SourceForge webserver (which is manually
+ syncronized with <ulink url="https://www.privoxy.org/">www.privoxy.org</ulink>)
+ and ensure all files and directories there are group writable.
</para>
<para>
Please do <emphasis>NOT</emphasis> use any other means of transferring
</para>
</sect1>
- <!-- ~~~~~ New section ~~~~~ -->
- <sect1 id="contact"><title>Contacting the developers, Bug Reporting and Feature Requests</title>
-<!-- Include contacting.sgml -->
- &contacting;
-<!-- end contacting -->
- </sect1>
-
-
-<!-- ~~~~~~~~ New section Header ~~~~~~~~~ -->
-<sect1 id="copyright"><title>Privoxy Copyright, License and History</title>
-
-<!-- Include copyright.sgml -->
- ©right;
-<!-- end -->
-
-<!-- ~~~~~ New section ~~~~~ -->
-<sect2><title>License</title>
-<!-- Include copyright.sgml: -->
- &license;
-<!-- end copyright -->
-</sect2>
-<!-- ~ End section ~ -->
-
-<!-- ~~~~~ New section ~~~~~ -->
-<sect2><title>History</title>
-<!-- Include history.sgml -->
- &history;
-<!-- end -->
-</sect2>
-
-</sect1>
-
- <!-- ~~~~~ New section ~~~~~ -->
- <sect1 id="seealso"><title>See also</title>
-<!-- Include seealso.sgml -->
- &seealso;
-<!-- end -->
-
- </sect1>
-
<!--
This program is free software; you can redistribute it
or write to the Free Software Foundation, Inc., 59
Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- $Log: developer-manual.sgml,v $
- Revision 2.36 2011/09/04 11:10:12 fabiankeil
- Ditch trailing whitespace
-
- Revision 2.35 2011/08/17 10:40:07 fabiankeil
- Update the entities.
-
- This commit is chronological out of order.
-
- Revision 2.34 2010/11/06 12:55:48 fabiankeil
- Set p-version to 3.0.17
-
- Revision 2.33 2010/02/13 17:38:27 fabiankeil
- Update entities for 3.0.16 stable.
-
- Revision 2.32 2009/11/15 14:24:12 fabiankeil
- Prepare to generate docs for 3.0.16 UNRELEASED.
-
- Revision 2.31 2009/10/10 05:48:55 fabiankeil
- Prepare for 3.0.15 beta.
-
- Revision 2.30 2009/07/18 16:24:39 fabiankeil
- Bump entities for 3.0.14 beta.
-
- Revision 2.29 2009/06/12 14:30:58 fabiankeil
- Update entities for 3.0.13 beta.
-
- Revision 2.28 2009/05/16 13:27:21 fabiankeil
- Remove CVS revision logs. TODO item #33.
-
- Revision 2.27 2009/02/19 02:20:22 hal9
- Make some links in seealso conditional. Man page is now privoxy only links.
-
- Revision 2.26 2009/02/12 16:08:26 fabiankeil
- Declare the code stable.
-
- Revision 2.25 2009/02/12 15:37:05 fabiankeil
- Update templates.
-
- Revision 2.24 2009/01/13 16:50:35 fabiankeil
- The standard.action file is gone.
-
- Revision 2.23 2008/09/26 17:02:01 fabiankeil
- - Break some more CVS substitutions in examples.
- - Remove Junkbusters reference in example header
- for new files.
-
- Revision 2.22 2008/08/30 15:37:35 fabiankeil
- Update entities.
-
- Revision 2.21 2008/08/16 08:51:28 fabiankeil
- Update version-related entities.
-
- Revision 2.20 2008/06/14 13:21:24 fabiankeil
- Prepare for the upcoming 3.0.9 beta release.
-
- Revision 2.19 2008/05/12 11:13:33 fabiankeil
- Clarify that Privoxy is licensed under GPL version 2.
-
- Revision 2.18 2008/02/04 12:14:06 fabiankeil
- Change "Edit Packages" URL to use https.
-
- Revision 2.17 2008/02/03 21:37:41 hal9
- Apply patch from Mark: s/OSX/OS X/
-
- Revision 2.16 2008/01/19 17:52:38 hal9
- Re-commit to fix various minor issues for new release.
-
- Revision 2.15 2008/01/19 15:03:05 hal9
- Doc sources tagged for 3.0.8 release.
-
- Revision 2.14 2008/01/17 01:49:51 hal9
- Change copyright notice for docs s/2007/2008/. All these will be rebuilt soon
- enough.
-
- Revision 2.13 2007/10/30 17:59:31 fabiankeil
- - Bump p-version, p-status and copyright date.
- - Mention that the manual is out of date.
- - Don't use examples with HardToReadCamelCase after
- explaining that we actually don't like that.
- - Minor cosmetics.
-
- Revision 2.12 2006/11/14 01:57:46 hal9
- Dump all docs prior to 3.0.6 release. Various minor changes to faq and user
- manual.
-
- Revision 2.11 2006/09/26 02:36:29 hal9
- Fix broken link per bug tracker.
-
- Revision 2.10 2006/09/22 01:27:55 hal9
- Final commit of probably various minor changes here and there. Unless
- something changes this should be ready for pending release.
-
- Revision 2.9 2006/09/14 02:30:07 hal9
- Fix ijbswa cvs links. Update notes on release process, and which config files
- should be overwritten and which not.
-
- Revision 2.8 2006/08/22 23:35:01 hal9
- Fix email address, cvs URI, address branching changes and various other
- small updates.
-
- Revision 2.7 2006/07/18 14:48:50 david__schmidt
- Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
- with what was really the latest development (the v_3_0_branch branch)
-
- Revision 1.46.2.11 2002/12/11 13:12:15 hal9
- Rewrite cvs write access give-away section.
-
- Revision 1.46.2.10 2002/09/26 21:53:45 hal9
- Changes to reflect recent change in stable branch commit policy (hopefully
- clearer now).
-
- Revision 1.46.2.9 2002/09/26 01:21:40 hal9
- Porting 3.1.1 changes: more on cvs and branches, more on versions and
- releases.
-
- Revision 1.46.2.8 2002/08/17 00:16:10 hal9
- Add note on updating webserver for User-manual/CGI editor, which is version
- dependent (and different from main UM link).
-
- Revision 1.46.2.7 2002/08/14 17:29:25 hal9
- Add small notes on post-release steps, and uploading docs to webserver.
-
- Revision 1.46.2.6 2002/08/10 11:40:25 oes
- Added disclaimer about probably being out-of-date and two small hints
-
- Revision 1.46.2.5 2002/08/09 01:15:12 hal9
- Added some notes on pre-release steps (test builds first, update ChangeLog).
-
- Revision 1.46.2.4 2002/05/29 00:30:59 mal0rd
- Fixed a little formatting. Clarified debian section.
-
- Revision 1.46.2.3 2002/05/28 04:32:45 hal9
- Change hints on bundling index.html to privoxy-index.html
-
- Revision 1.46.2.2 2002/05/26 17:04:24 hal9
- -Spellcheck, very minor edits, and sync across branches
-
- Revision 1.48 2002/05/26 12:48:31 roro
- Add releasing information about Debian.
-
- Revision 1.47 2002/05/26 04:55:11 mal0rd
- Added debian-dist and debian-upload targets. Also documented usage.
-
- Revision 1.46 2002/05/22 17:15:00 oes
- Updated intro
-
- Revision 1.45 2002/05/19 23:01:54 hal9
- Add small section on general packaging guidelines (e.g. actions files must
- be writable).
-
- Revision 1.44 2002/05/15 03:55:17 hal9
- Fix ulink -> link, and minor modification to release process section for
- clarification.
-
- Revision 1.43 2002/05/10 01:48:19 hal9
- This is mostly proposed copyright/licensing additions and changes. Docs
- are still GPL, but licensing and copyright are more visible. Also, copyright
- changed in doc header comments (eliminate references to JB except FAQ).
-
- Revision 1.42 2002/05/05 20:26:02 hal9
- Sorting out license vs copyright in these docs.
-
- Revision 1.41 2002/05/04 08:44:44 swa
- bumped version
-
- Revision 1.40 2002/05/04 00:43:43 hal9
- -Remove TOC/first page kludge with proper stylesheet fix.
- -Combined the two very brief sections: Intro and Quickstart.
-
- Revision 1.39 2002/05/02 15:08:25 oes
- Added explanation about version numbers and RPM package revisions
-
- Revision 1.38 2002/04/29 02:20:31 hal9
- Add info on steps for uploading and the release process on SF.
-
- Revision 1.37 2002/04/26 17:23:29 swa
- bookmarks cleaned, changed structure of user manual, screen and programlisting cleanups, and numerous other changes that I forgot
-
- Revision 1.36 2002/04/26 05:25:23 hal9
- Mass commit to catch a few scattered fixes.
-
- Revision 1.35 2002/04/17 15:16:15 oes
- Added link to docbook crash course
-
- Revision 1.34 2002/04/15 23:39:32 oes
- - Extended & fixed the release section
- - Added CVS guideline sections
- - Separated webserver section from release section
- - Commented out boilerplate inclusion (If you don't know yet what it is,
- you shouldn't mess with its code ;-)
- - Nits & fixes
-
- Revision 1.33 2002/04/12 03:49:53 hal9
- Spell checked. Clarification on where docs are kept.
-
- Revision 1.32 2002/04/11 21:29:58 jongfoster
- Documenting Win32 release procedure
-
- Revision 1.31 2002/04/11 09:32:52 oes
- more nits
-
- Revision 1.30 2002/04/11 09:24:53 oes
- nits
-
- Revision 1.29 2002/04/10 18:45:14 swa
- generated
-
- Revision 1.28 2002/04/08 22:59:26 hal9
- Version update. Spell chkconfig correctly :)
-
- Revision 1.27 2002/04/08 15:31:18 hal9
- Touch ups to documentation section.
-
- Revision 1.26 2002/04/07 23:50:08 hal9
- Documentation changes to reflect HTML docs now in CVS, and new generated files
- list.
-
- Revision 1.25 2002/04/06 05:07:28 hal9
- -Add privoxy-man-page.sgml, for man page.
- -Add authors.sgml for AUTHORS (and p-authors.sgml)
- -Reworked various aspects of various docs.
- -Added additional comments to sub-docs.
-
- Revision 1.24 2002/04/04 21:33:37 hal9
- More on documenting the documents.
-
- Revision 1.23 2002/04/04 18:46:47 swa
- consistent look. reuse of copyright, history et. al.
-
- Revision 1.22 2002/04/04 17:27:56 swa
- more single file to be included at multiple points. make maintaining easier
-
- Revision 1.21 2002/04/04 06:48:37 hal9
- Structural changes to allow for conditional inclusion/exclusion of content
- based on entity toggles, e.g. 'entity % p-not-stable "INCLUDE"'. And
- definition of internal entities, e.g. 'entity p-version "2.9.13"' that will
- eventually be set by Makefile.
- More boilerplate text for use across multiple docs.
-
- Revision 1.20 2002/04/04 03:28:27 david__schmidt
- Add Mac OS X section
-
- Revision 1.19 2002/04/03 15:09:42 david__schmidt
- Add OS/2 build section
-
- Revision 1.18 2002/04/03 03:51:48 hal9
- Touch ups.
-
- Revision 1.17 2002/04/03 01:21:17 hal9
- Implementing Andreas's suggestions for Release sections.
-
- Revision 1.16 2002/03/31 23:04:40 hal9
- Fleshed out the doc section, and added something for an intro so it was not
- blank.
-
- Revision 1.15 2002/03/30 22:29:47 swa
- wrong make flavour
-
- Revision 1.14 2002/03/30 19:04:08 swa
- people release differently. no good.
- I want to make parts of the docs only.
-
- Revision 1.13 2002/03/27 01:16:41 hal9
- ditto
-
- Revision 1.12 2002/03/27 01:02:51 hal9
- Touch up on name change...
-
- Revision 1.11 2002/03/26 22:29:55 swa
- we have a new homepage!
-
- Revision 1.10 2002/03/24 12:33:01 swa
- more additions.
-
- Revision 1.9 2002/03/24 11:01:05 swa
- name change
-
- Revision 1.8 2002/03/23 15:13:11 swa
- renamed every reference to the old name with foobar.
- fixed "application foobar application" tag, fixed
- "the foobar" with "foobar". left junkbustser in cvs
- comments and remarks to history untouched.
-
- Revision 1.7 2002/03/11 13:13:27 swa
- correct feedback channels
-
- Revision 1.6 2002/02/24 14:25:06 jongfoster
- Formatting changes. Now changing the doctype to DocBook XML 4.1
- will work - no other changes are needed.
-
- Revision 1.5 2001/10/31 18:16:51 swa
- documentation added: howto generate docs in text and html
- format, howto move stuff to the webserver.
-
- Revision 1.4 2001/09/23 10:13:48 swa
- upload process established. run make webserver and
- the documentation is moved to the webserver. documents
- are now linked correctly.
-
- Revision 1.3 2001/09/13 15:27:40 swa
- cosmetics
-
- Revision 1.2 2001/09/13 15:20:17 swa
- merged standards into developer manual
-
- Revision 1.1 2001/09/12 15:36:41 swa
- source files for junkbuster documentation
-
- Revision 1.3 2001/09/10 17:43:59 swa
- first proposal of a structure.
-
- Revision 1.2 2001/06/13 14:28:31 swa
- docs should have an author.
-
- Revision 1.1 2001/06/13 14:20:37 swa
- first import of project's documentation for the webserver.
-
-->
</article>
projects / privoxy.git / blobdiff