-# Sample Configuration File for Privoxy 3.0.27
+# Sample Configuration File for Privoxy 3.0.29
#
-# Copyright (C) 2001-2018 Privoxy Developers https://www.privoxy.org/
+# Copyright (C) 2001-2020 Privoxy Developers https://www.privoxy.org/
#
#####################################################################
# #
# 4. ACCESS CONTROL AND SECURITY #
# 5. FORWARDING #
# 6. MISCELLANEOUS #
-# 7. WINDOWS GUI OPTIONS #
+# 7. TLS #
+# 8. WINDOWS GUI OPTIONS #
# #
#####################################################################
#
#
# The available debug levels are:
#
-# debug 1 # Log the destination for each request Privoxy let through. See also debug 1024.
+# debug 1 # Log the destination for each request. See also debug 1024.
# debug 2 # show each connection status
# debug 4 # show I/O status
# debug 8 # show header parsing
# you read the log messages, you may even be able to solve the
# problem on your own.
#
-#debug 1 # Log the destination for each request Privoxy let through. See also debug 1024.
+#debug 1 # Log the destination for each request.
#debug 1024 # Log the destination for requests Privoxy didn't let through, and the reason why.
#debug 4096 # Startup banner and warnings
#debug 8192 # Non-fatal errors
# result in DNS traffic.
#
# If the specified address isn't available on the system, or if
-# the hostname can't be resolved, Privoxy will fail to start.
+# the hostname can't be resolved, Privoxy will fail to start. On
+# GNU/Linux, and other platforms that can listen on not yet
+# assigned IP addresses, Privoxy will start and will listen on
+# the specified address whenever the IP address is assigned to
+# the system
#
# IPv6 addresses containing colons have to be quoted by
# brackets. They can only be used if Privoxy has been compiled
# whole destination part are optional.
#
# If your system implements RFC 3493, then src_addr and dst_addr
-# can be IPv6 addresses delimeted by brackets, port can be a
+# can be IPv6 addresses delimited by brackets, port can be a
# number or a service name, and src_masklen and dst_masklen can
# be a number from 0 to 128.
#
# requests aren't rejected. Requests are accepted if the
# specified trusted-cgi-refer is the prefix of the Referer.
#
+# If the trusted source is supposed to access the CGI pages via
+# JavaScript the cors-allowed-origin option can be used.
+#
# +-----------------------------------------------------+
# | Warning |
# |-----------------------------------------------------|
# |the user's knowledge. |
# +-----------------------------------------------------+
#
-trusted-cgi-referer http://www.example.org/
+#trusted-cgi-referer http://www.example.org/local-privoxy-control-page
+#
+# 4.11. cors-allowed-origin
+# ==========================
+#
+# Specifies:
+#
+# A trusted website which can access Privoxy's CGI pages through
+# JavaScript.
#
+# Type of value:
+#
+# URL
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# No external sites get access via cross-origin resource
+# sharing.
+#
+# Notes:
+#
+# Modern browsers by default prevent cross-origin requests made
+# via JavaScript to Privoxy's CGI interface even if Privoxy
+# would trust the referer because it's white listed via the
+# trusted-cgi-referer directive.
+#
+# Cross-origin resource sharing (CORS) is a mechanism to allow
+# cross-origin requests.
+#
+# The "cors-allowed-origin" option can be used to specify a
+# domain that is allowed to make requests to Privoxy CGI
+# interface via JavaScript. It is used in combination with the
+# trusted-cgi-referer directive.
+#
+# +-----------------------------------------------------+
+# | Warning |
+# |-----------------------------------------------------|
+# |Declaring domains the admin doesn't control |
+# |trustworthy may allow malicious third parties to |
+# |modify Privoxy's internal state against the user's |
+# |wishes and without the user's knowledge. |
+# +-----------------------------------------------------+
+#
+#cors-allowed-origin http://www.example.org/
#
# 5. FORWARDING
# ==============
#
# Type of value:
#
-# target_pattern socks_proxy[:port] http_parent[:port]
+# target_pattern [user:pass@]socks_proxy[:port] http_parent[:port]
#
# where target_pattern is a URL pattern that specifies to which
# requests (i.e. URLs) this forward rule shall apply. Use / to
# addresses in dotted decimal notation or valid DNS names (
# http_parent may be "." to denote "no HTTP forwarding"), and
# the optional port parameters are TCP ports, i.e. integer
-# values from 1 to 65535
+# values from 1 to 65535. user and pass can be used for SOCKS5
+# authentication if required.
#
# Default value:
#
#
# forward-socks4 / socks-gw.example.com:1080 .
#
+# To connect SOCKS5 proxy which requires username/password
+# authentication:
+#
+# forward-socks5 / user:pass@socks-gw.example.com:1080 .
+#
# To chain Privoxy and Tor, both running on the same system, you
# would use something like:
#
#
# default-server-timeout 60
#
-#default-server-timeout 60
+#default-server-timeout 5
#
# 6.7. connection-sharing
# ========================
# Notes:
#
# Under high load incoming connection may queue up before
-# Privoxy gets around to serve them. The queue length is
-# limitted by the operating system. Once the queue is full,
-# additional connections are dropped before Privoxy can accept
-# and serve them.
+# Privoxy gets around to serve them. The queue length is limited
+# by the operating system. Once the queue is full, additional
+# connections are dropped before Privoxy can accept and serve
+# them.
#
# Increasing the queue length allows Privoxy to accept more
-# incomming connections that arrive roughly at the same time.
+# incoming connections that arrive roughly at the same time.
#
# Note that Privoxy can only request a certain queue length,
# whether or not the requested length is actually used depends
# affected by this directive.
#
#client-header-order Host \
+# User-Agent \
# Accept \
# Accept-Language \
# Accept-Encoding \
# # Define a couple of tags, the described effect requires action sections
# # that are enabled based on CLIENT-TAG patterns.
# client-specific-tag circumvent-blocks Overrule blocks but do not affect other actions
-# disable-content-filters Disable content-filters but do not affect other actions
-#
+# client-specific-tag disable-content-filters Disable content-filters but do not affect other actions
#
#
# 6.17. client-tag-lifetime
# receive-buffer-size 32768
#
#
+# 7. TLS/SSL INSPECTION (EXPERIMENTAL)
+# =====================================
+#
+# 7.1. ca-directory
+# ==================
+#
+# Specifies:
+#
+# Directory with the CA key, the CA certificate and the trusted
+# CAs file.
+#
+# Type of value:
+#
+# Text
+#
+# Default value:
+#
+# Empty string
+#
+# Effect if unset:
+#
+# Default value is used.
+#
+# Notes:
+#
+# This directive specifies the directory where the CA key, the
+# CA certificate and the trusted CAs file are located.
+#
+# The permissions should only let Privoxy and the Privoxy admin
+# access the directory.
+#
+# Examples:
+#
+# ca-directory /usr/local/etc/privoxy/CA
+#
+#ca-directory /usr/local/etc/privoxy/CA
+#
+# 7.2. ca-cert-file
+# ==================
#
-# 7. WINDOWS GUI OPTIONS
+# Specifies:
+#
+# The CA certificate file in ".crt" format.
+#
+# Type of value:
+#
+# Text
+#
+# Default value:
+#
+# cacert.crt
+#
+# Effect if unset:
+#
+# Default value is used.
+#
+# Notes:
+#
+# This directive specifies the name of the CA certificate file
+# in ".crt" format.
+#
+# The file is used by Privoxy to generate website certificates
+# when https inspection is enabled with the https-inspection
+# action.
+#
+# Privoxy clients should import the certificate so that they can
+# validate the generated certificates.
+#
+# The file can be generated with: openssl req -new -x509
+# -extensions v3_ca -keyout cakey.pem -out cacert.crt -days 3650
+#
+# Examples:
+#
+# ca-cert-file root.crt
+#
+#ca-cert-file cacert.crt
+#
+# 7.3. ca-key-file
+# =================
+#
+# Specifies:
+#
+# The CA key file in ".pem" format.
+#
+# Type of value:
+#
+# Text
+#
+# Default value:
+#
+# cacert.pem
+#
+# Effect if unset:
+#
+# Default value is used.
+#
+# Notes:
+#
+# This directive specifies the name of the CA key file in ".pem"
+# format. See the ca-cert-file for a command to generate it.
+#
+# Examples:
+#
+# ca-key-file cakey.pem
+#
+#ca-key-file cakey.pem
+#
+# 7.4. ca-password
+# =================
+#
+# Specifies:
+#
+# The password for the CA keyfile.
+#
+# Type of value:
+#
+# Text
+#
+# Default value:
+#
+# Empty string
+#
+# Effect if unset:
+#
+# Default value is used.
+#
+# Notes:
+#
+# This directive specifies the password for the CA keyfile that
+# is used when Privoxy generates certificates for intercepted
+# requests.
+#
+# Note that the password is shown on the CGI page so don't reuse
+# an important one.
+#
+# Examples:
+#
+# ca-password blafasel
+#
+#ca-password swordfish
+#
+# 7.5. certificate-directory
+# ===========================
+#
+# Specifies:
+#
+# Directory to save generated keys and certificates.
+#
+# Type of value:
+#
+# Text
+#
+# Default value:
+#
+# ./certs
+#
+# Effect if unset:
+#
+# Default value is used.
+#
+# Notes:
+#
+# This directive specifies the directory where generated TLS/SSL
+# keys and certificates are saved when https inspection is
+# enabled with the https-inspection action.
+#
+# The keys and certificates currently have to be deleted
+# manually when changing the ca-cert-file and the ca-cert-key.
+#
+# The permissions should only let Privoxy and the Privoxy admin
+# access the directory.
+#
+# +-----------------------------------------------------+
+# | Warning |
+# |-----------------------------------------------------|
+# |Privoxy currently does not garbage-collect obsolete |
+# |keys and certificates and does not keep track of how |
+# |may keys and certificates exist. |
+# | |
+# |Privoxy admins should monitor the size of the |
+# |directory and/or make sure there is sufficient space |
+# |available. A cron job to limit the number of keys and|
+# |certificates to a certain number may be worth |
+# |considering. |
+# +-----------------------------------------------------+
+# Examples:
+#
+# certificate-directory /usr/local/var/privoxy/certs
+#
+#certificate-directory /usr/local/var/privoxy/certs
+#
+# 7.6. trusted-cas-file
+# ======================
+#
+# Specifies:
+#
+# The trusted CAs file in ".pem" format.
+#
+# Type of value:
+#
+# File name relative to ca-directory
+#
+# Default value:
+#
+# trustedCAs.pem
+#
+# Effect if unset:
+#
+# Default value is used.
+#
+# Notes:
+#
+# This directive specifies the trusted CAs file that is used
+# when validating certificates for intercepted TLS/SSL requests.
+#
+# An example file can be downloaded from https://curl.haxx.se/ca
+# /cacert.pem.
+#
+# Examples:
+#
+# trusted-cas-file trusted_cas_file.pem
+#
+#trusted-cas-file trustedCAs.pem
+#
+# 8. WINDOWS GUI OPTIONS
# =======================
#
# Privoxy has a number of options specific to the Windows GUI
# interface:
#
#
-#
# If "activity-animation" is set to 1, the Privoxy icon will animate
# when "Privoxy" is active. To turn off, set to 0.
#
#activity-animation 1
#
-#
-#
# If "log-messages" is set to 1, Privoxy copies log messages to the
# console window. The log detail depends on the debug directive.
#
#log-messages 1
#
-#
-#
# If "log-buffer-size" is set to 1, the size of the log buffer, i.e.
# the amount of memory used for the log messages displayed in the
# console window, will be limited to "log-max-lines" (see below).
projects / privoxy.git / blobdiff