-# Sample Configuration file for the Internet Junkbuster 2.0
-
-#
-# $Id: config,v 1.2 2001/04/30 03:05:11 rodney Exp $
-#
-
-#
-#
-# Copyright 1997-8 Junkbusters Corp. For distribution, modification and use
-# under the GNU General Public License. These files come with NO WARRANTY.
-# See http://www.junkbusters.com/ht/en/gpl.html or README file for details.
-#
-# When starting the proxy, give the name of this file as an argument.
-# Any changes made to this file are *not* automatically loaded; you have
-# to stop and restart the proxy.
-
-# For information see http://www.junkbusters.com/ht/en/ijbman.html
-# or the documentation that came with the release
-
-# Lines beginning with a # character are comments; they are ignored.
-# Many example lines are provided here commented out
-
-# the blockfile contains patterns to be blocked by the proxy
-blockfile ./blocklist # comments are OK here, too
-
-# the imagefile contains patterns to detect blocked images
-imagefile ./imagelist
-
-# the popfile contains patterns of servers where javascript popups are disabled
-#
-# if the next line is not commented out, all javascript popups from the sites
-# that match the patterns in popup will be blocked
-# popupfile ./popup
-
-# File containing content modification rules
-#re_filterfile ./re_filterfile
-
-# Uncomment to filter *all* traffic. Default is to
-# filter only if we wouldn't send a cookie either.
-#
-#re_filter_all
-
-
-# the cookiefile contains patterns to specify the cookie management policy
-#
-cookiefile ./cookiefile
-
-# the logfile is where all logging and error messages are written
-#
-logfile ./junkbuster.log
-
-# the jarfile is where cookies can be stored
-#
-#jarfile ./jarfile
-
-# the forwardfile defines domain-specific routing
-#
-#forwardfile ./forward
-
-# file which lists and into which trusted domains are written
-#
-#trustfile ./trust
-# files specify locations of "for information about trusted referers, see.."
-# multiple trust_info_url lines are OK
-#
-# trust_info_url http://internet.junkbuster.com/
-# trust_info_url http://www.yoursite.com/our_trust_policy.html
-#
-
-# The access control list file can be used to restrict IP addresses
-# that are permitted to use the proxy (see warnings in the FAQ).
-#
-#aclfile ./aclfile
-
-# add an "X-Forwarded-For:" specification to each request header
-#
-#add-forwarded-header
-
-# if logging cookies into a jarfile, and no other wafers were
-# explicity set, then by default a vanilla wafer is sent with
-# each request.
-#
-# setting 'suppress-vanilla-wafer' stops this vanilla wafer from
-# being sent.
-#
-suppress-vanilla-wafer
-
-# add these wafers to each request header
-# multiple wafer lines are OK
-#
-#wafer NOTE=Like most people, I want my browsing to be anonymous.
-#wafer WARNING=Please do not attempt to track me.
-
-# Anything can be added to the request headers. Please don't litter.
-# multiple add-header lines are OK
-#
-#add-header Forwarded: by http://stay-out-of-my-backyard.net
-#add-header Forwarded: by http://pro-privacy-isp.net
-#add-header Proxy-Connection: Keep-Alive
-
-# listen-address specifies where the Junkbuster will listen for connections
-# Specifying a port is optional; if unspecified the defaults is 8000.
-# Before Version 2.0.2 the default was to bind to all IP addresses (INADDR_ANY)
-# This has been restricted to localhost to avoid unintended security breaches.
-# To open the proxy to all, uncomment the following line:
-#listen-address :8000
-# other example usage:
-#listen-address 124.207.250.245:8080
-# to explicitly state what is now the default:
-#listen-address localhost
-# or equivalently:
-listen-address 127.0.0.1:8000
-
-# user-agent specifies treatment of the "User-Agent:" (and "UA-*:") header(s)
-# default: Forge the "User-Agent:"
-# 'text' : Always send <text> as the "User-Agent:"
-# . : Pass the "User-Agent:" unchanged
-# @ : Pass the "User-Agent:" if the server is in the cookie file,
-# forge the "User-Agent:" otherwise
-#user-agent @
-
-# note: Russian browsers may be confused if user agent misidentifies
-# the operating system (Mac vs Windows); see FAQ
-user-agent .
-
-# referer specifies treatment of the "Referer:" header
-# New option by "Andreas S. Oesterhelt" <oes@paradis.rhein.de>
-#
-# default: Kill the referrer-header from the client
-# 'text' : Always send <text> as the referrer
-# . : Pass the referrer unchanged
-# @ : Pass the referrer if the server is in the cookie file,
-# kill the referrer otherwise
-# § : Pass the referrer if the server is in the cookie file,
-# send a forged referrer that points to the root-diretory URL
-# of the current request otherwise
-referer §
-
-# from specifies value to be subsituted if browser provides a "From:" header
-#
-#from spam-me-senseless@sittingduck.net
-
-# tinygif allows you to change the appearance of blocked images
-#
-# tinygif 0 # Show a "broken icon"
-# tinygif 1 # Show a GIF of one transparent pixel
-# tinygif 2 # Show a GIF with the word "JUNKBUSTER"
-tinygif 2
-# tinygif 3 http://localhost/1x1.gif # Temporary redirect to this URL
-
-# Andrew <anw@tirana.freewire.co.uk> added
-# The following can be used to suppress display of the block lists when the
-# page http://x.x/show-proxy-args is displayed. With a long block list this
-# accelerates loading of the configuration page and also hides the contents of
-# the block lists (for whatever reason). Maintainers of junkbuster proxies for
-# multiple use can specify a message for any use who wants to know what is in
-# these files.
-#
-#suppress-blocklists Contact sysadmin@example.com for details.
-# suppress-blocklists
-
-# debug sets the level of debugging information to log in the logfile
-#
-# debug 1 # GPC = show each GET/POST/CONNECT request
-# debug 2 # CONN = show each connection status
-# debug 4 # IO = show I/O status
-# debug 8 # HDR = show header parsing
-# debug 16 # LOG = log all data into the logfile
-# debug 32 # FRC = debug force feature
-# debug 64 # REF = debug regular expression filter
-#
-# multiple "debug" directives, are OK - they're logical-OR'd together
-#
-#debug 15 # same as setting the first 4 listed above
-debug 1
-#debug 255
-
-# single-threaded operation (i.e. disallows multiple threads or processes)
-# This is most often used for debugging because it keeps the
-# debugging output "in order" for easy reading.
+# Sample Configuration File for Privoxy v3.0.12
+#
+# $Id: config,v 1.74 2009/02/19 17:26:26 fabiankeil Exp $
+#
+# Copyright (C) 2001-2009 Privoxy Developers http://www.privoxy.org/
+#
+####################################################################
+# #
+# Table of Contents #
+# #
+# I. INTRODUCTION #
+# II. FORMAT OF THE CONFIGURATION FILE #
+# #
+# 1. LOCAL SET-UP DOCUMENTATION #
+# 2. CONFIGURATION AND LOG FILE LOCATIONS #
+# 3. DEBUGGING #
+# 4. ACCESS CONTROL AND SECURITY #
+# 5. FORWARDING #
+# 6. WINDOWS GUI OPTIONS #
+# #
+####################################################################
+#
+#
+# I. INTRODUCTION
+# ===============
+#
+# This file holds Privoxy's main configuration. Privoxy detects
+# configuration changes automatically, so you don't have to restart
+# it unless you want to load a different configuration file.
+#
+# The configuration will be reloaded with the first request after
+# the change was done, this request itself will still use the old
+# configuration, though. In other words: it takes two requests before
+# you see the result of your changes. Requests that are dropped due
+# to ACL don't trigger reloads.
+#
+# When starting Privoxy on Unix systems, give the location of this
+# file as last argument. On Windows systems, Privoxy will look for
+# this file with the name 'config.txt' in the current working directory
+# of the Privoxy process.
+#
+#
+# II. FORMAT OF THE CONFIGURATION FILE
+# ====================================
+#
+# Configuration lines consist of an initial keyword followed by a
+# list of values, all separated by whitespace (any number of spaces
+# or tabs). For example,
+#
+# actionsfile default.action
+#
+# Indicates that the actionsfile is named 'default.action'.
+#
+# The '#' indicates a comment. Any part of a line following a '#'
+# is ignored, except if the '#' is preceded by a '\'.
+#
+# Thus, by placing a # at the start of an existing configuration
+# line, you can make it a comment and it will be treated as if it
+# weren't there. This is called "commenting out" an option and can
+# be useful. Removing the # again is called "uncommenting".
+#
+# Note that commenting out an option and leaving it at its default
+# are two completely different things! Most options behave very
+# differently when unset. See the "Effect if unset" explanation in
+# each option's description for details.
+#
+# Long lines can be continued on the next line by using a `\' as the
+# last character.
+#
+#
+#
+# 1. LOCAL SET-UP DOCUMENTATION
+# ==============================
+#
+# If you intend to operate Privoxy for more users than just yourself,
+# it might be a good idea to let them know how to reach you, what
+# you block and why you do that, your policies, etc.
+#
+#
+#
+# 1.1. user-manual
+# =================
+#
+# Specifies:
+#
+# Location of the Privoxy User Manual.
+#
+# Type of value:
+#
+# A fully qualified URI
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# http://www.privoxy.org/version/user-manual/ will be used,
+# where version is the Privoxy version.
+#
+# Notes:
+#
+# The User Manual URI is the single best source of information on
+# Privoxy, and is used for help links from some of the internal
+# CGI pages. The manual itself is normally packaged with the
+# binary distributions, so you probably want to set this to a
+# locally installed copy.
+#
+# Examples:
+#
+# The best all purpose solution is simply to put the full local
+# PATH to where the User Manual is located:
+#
+# user-manual /usr/share/doc/privoxy/user-manual
+#
+#
+# The User Manual is then available to anyone with
+# access to Privoxy, by following the built-in URL:
+# http://config.privoxy.org/user-manual/ (or the shortcut:
+# http://p.p/user-manual/).
+#
+# If the documentation is not on the local system, it can be
+# accessed from a remote server, as:
+#
+# user-manual http://example.com/privoxy/user-manual/
+#
+#
+# WARNING!!!
+#
+# If set, this option should be the first option in the config
+# file, because it is used while the config file is being read.
+#
+user-manual /home/halb/privoxy/share/doc/privoxy/user-manual/
+#
+#
+# 1.2. trust-info-url
+# ====================
+#
+# Specifies:
+#
+# A URL to be displayed in the error page that users will see if
+# access to an untrusted page is denied.
+#
+# Type of value:
+#
+# URL
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# No links are displayed on the "untrusted" error page.
+#
+# Notes:
+#
+# The value of this option only matters if the experimental trust
+# mechanism has been activated. (See trustfile below.)
+#
+# If you use the trust mechanism, it is a good idea to write
+# up some on-line documentation about your trust policy and to
+# specify the URL(s) here. Use multiple times for multiple URLs.
+#
+# The URL(s) should be added to the trustfile as well, so users
+# don't end up locked out from the information on why they were
+# locked out in the first place!
+#
+#trust-info-url http://www.example.com/why_we_block.html
+#trust-info-url http://www.example.com/what_we_allow.html
+#
+#
+# 1.3. admin-address
+# ===================
+#
+# Specifies:
+#
+# An email address to reach the Privoxy administrator.
+#
+# Type of value:
+#
+# Email address
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# No email address is displayed on error pages and the CGI user
+# interface.
+#
+# Notes:
+#
+# If both admin-address and proxy-info-url are unset, the whole
+# "Local Privoxy Support" box on all generated pages will not
+# be shown.
+#
+#admin-address privoxy-admin@example.com
+#
+#
+# 1.4. proxy-info-url
+# ====================
+#
+# Specifies:
+#
+# A URL to documentation about the local Privoxy setup,
+# configuration or policies.
+#
+# Type of value:
+#
+# URL
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# No link to local documentation is displayed on error pages and
+# the CGI user interface.
+#
+# Notes:
+#
+# If both admin-address and proxy-info-url are unset, the whole
+# "Local Privoxy Support" box on all generated pages will not
+# be shown.
+#
+# This URL shouldn't be blocked ;-)
+#
+#proxy-info-url http://www.example.com/proxy-service.html
+#
+#
+# 2. CONFIGURATION AND LOG FILE LOCATIONS
+# ========================================
+#
+# Privoxy can (and normally does) use a number of other files for
+# additional configuration, help and logging. This section of the
+# configuration file tells Privoxy where to find those other files.
+#
+# The user running Privoxy, must have read permission for all
+# configuration files, and write permission to any files that would
+# be modified, such as log files and actions files.
+#
+#
+#
+# 2.1. confdir
+# =============
+#
+# Specifies:
+#
+# The directory where the other configuration files are located.
+#
+# Type of value:
+#
+# Path name
+#
+# Default value:
+#
+# /etc/privoxy (Unix) or Privoxy installation dir (Windows)
+#
+# Effect if unset:
+#
+# Mandatory
+#
+# Notes:
+#
+# No trailing "/", please.
+#
+confdir /home/halb/privoxy/etc
+#
+#
+# 2.2. templdir
+# ==============
+#
+# Specifies:
+#
+# An alternative directory where the templates are loaded from.
+#
+# Type of value:
+#
+# Path name
+#
+# Default value:
+#
+# unset
+#
+# Effect if unset:
+#
+# The templates are assumed to be located in confdir/template.
+#
+# Notes:
+#
+# Privoxy's original templates are usually overwritten with each
+# update. Use this option to relocate customized templates that
+# should be kept. As template variables might change between
+# updates, you shouldn't expect templates to work with Privoxy
+# releases other than the one they were part of, though.
+#
+#templdir .
+#
+#
+# 2.3. logdir
+# ============
+#
+# Specifies:
+#
+# The directory where all logging takes place (i.e. where the
+# logfile is located).
+#
+# Type of value:
+#
+# Path name
+#
+# Default value:
+#
+# /var/log/privoxy (Unix) or Privoxy installation dir (Windows)
+#
+# Effect if unset:
+#
+# Mandatory
+#
+# Notes:
+#
+# No trailing "/", please.
+#
+logdir /home/halb/privoxy/var/log/privoxy
+#
+#
+# 2.4. actionsfile
+# =================
+#
+# Specifies:
+#
+# The actions file(s) to use
+#
+# Type of value:
+#
+# Complete file name, relative to confdir
+#
+# Default values:
+#
+# match-all.action # Actions that are applied to all sites and maybe overruled later on.
+#
+# default.action # Main actions file
+#
+# user.action # User customizations
+#
+# Effect if unset:
+#
+# No actions are taken at all. More or less neutral proxying.
+#
+# Notes:
+#
+# Multiple actionsfile lines are permitted, and are in fact
+# recommended!
+#
+# The default values are default.action, which is the "main"
+# actions file maintained by the developers, and user.action,
+# where you can make your personal additions.
+#
+# Actions files contain all the per site and per URL configuration
+# for ad blocking, cookie management, privacy considerations,
+# etc. There is no point in using Privoxy without at least one
+# actions file.
+#
+# Note that since Privoxy 3.0.7, the complete filename, including
+# the ".action" extension has to be specified. The syntax change
+# was necessary to be consistent with the other file options and
+# to allow previously forbidden characters.
+#
+actionsfile match-all.action # Actions that are applied to all sites and maybe overruled later on.
+actionsfile default.action # Main actions file
+actionsfile user.action # User customizations
+#
+#
+# 2.5. filterfile
+# ================
+#
+# Specifies:
+#
+# The filter file(s) to use
+#
+# Type of value:
+#
+# File name, relative to confdir
+#
+# Default value:
+#
+# default.filter (Unix) or default.filter.txt (Windows)
+#
+# Effect if unset:
+#
+# No textual content filtering takes place, i.e. all +filter{name}
+# actions in the actions files are turned neutral.
+#
+# Notes:
+#
+# Multiple filterfile lines are permitted.
+#
+# The filter files contain content modification rules that use
+# regular expressions. These rules permit powerful changes on the
+# content of Web pages, and optionally the headers as well, e.g.,
+# you could try to disable your favorite JavaScript annoyances,
+# re-write the actual displayed text, or just have some fun
+# playing buzzword bingo with web pages.
+#
+# The +filter{name} actions rely on the relevant filter (name)
+# to be defined in a filter file!
+#
+# A pre-defined filter file called default.filter that contains a
+# number of useful filters for common problems is included in the
+# distribution. See the section on the filter action for a list.
+#
+# It is recommended to place any locally adapted filters into a
+# separate file, such as user.filter.
+#
+filterfile default.filter
+#filterfile user.filter # User customizations
+#
+#
+# 2.6. logfile
+# =============
+#
+# Specifies:
+#
+# The log file to use
+#
+# Type of value:
+#
+# File name, relative to logdir
+#
+# Default value:
+#
+# Unset (commented out). When activated: logfile (Unix) or
+# privoxy.log (Windows).
+#
+# Effect if unset:
+#
+# No logfile is written.
+#
+# Notes:
+#
+# The logfile is where all logging and error messages are
+# written. The level of detail and number of messages are set with
+# the debug option (see below). The logfile can be useful for
+# tracking down a problem with Privoxy (e.g., it's not blocking
+# an ad you think it should block) and it can help you to monitor
+# what your browser is doing.
+#
+# Depending on the debug options below, the logfile may be a
+# privacy risk if third parties can get access to it. As most
+# users will never look at it, Privoxy 3.0.7 and later only log
+# fatal errors by default.
+#
+# For most troubleshooting purposes, you will have to change that,
+# please refer to the debugging section for details.
+#
+# Your logfile will grow indefinitely, and you will probably
+# want to periodically remove it. On Unix systems, you can do
+# this with a cron job (see "man cron"). For Red Hat based Linux
+# distributions, a logrotate script has been included.
+#
+# Any log files must be writable by whatever user Privoxy is
+# being run as (on Unix, default user id is "privoxy").
+#
+logfile logfile
+#
+#
+# 2.7. trustfile
+# ===============
+#
+# Specifies:
+#
+# The name of the trust file to use
+#
+# Type of value:
+#
+# File name, relative to confdir
+#
+# Default value:
+#
+# Unset (commented out). When activated: trust (Unix) or trust.txt
+# (Windows)
+#
+# Effect if unset:
+#
+# The entire trust mechanism is disabled.
+#
+# Notes:
+#
+# The trust mechanism is an experimental feature for building
+# white-lists and should be used with care. It is NOT recommended
+# for the casual user.
+#
+# If you specify a trust file, Privoxy will only allow access to
+# sites that are specified in the trustfile. Sites can be listed
+# in one of two ways:
+#
+# Prepending a ~ character limits access to this site only (and
+# any sub-paths within this site), e.g. ~www.example.com allows
+# access to ~www.example.com/ features/news.html, etc.
+#
+# Or, you can designate sites as trusted referrers, by prepending
+# the name with a + character. The effect is that access to
+# untrusted sites will be granted -- but only if a link from
+# this trusted referrer was used to get there. The link target
+# will then be added to the "trustfile" so that future, direct
+# accesses will be granted. Sites added via this mechanism do
+# not become trusted referrers themselves (i.e. they are added
+# with a ~ designation). There is a limit of 512 such entries,
+# after which new entries will not be made.
+#
+# If you use the + operator in the trust file, it may grow
+# considerably over time.
+#
+# It is recommended that Privoxy be compiled with the
+# --disable-force, --disable-toggle and --disable-editor options,
+# if this feature is to be used.
+#
+# Possible applications include limiting Internet access for
+# children.
+#
+#trustfile trust
+#
+#
+# 3. DEBUGGING
+# =============
+#
+# These options are mainly useful when tracing a problem. Note that
+# you might also want to invoke Privoxy with the --no-daemon command
+# line option when debugging.
+#
+#
+#
+# 3.1. debug
+# ===========
+#
+# Specifies:
+#
+# Key values that determine what information gets logged.
+#
+# Type of value:
+#
+# Integer values
+#
+# Default value:
+#
+# 0 (i.e.: only fatal errors (that cause Privoxy to exit) are logged)
+#
+# Effect if unset:
+#
+# Default value is used (see above).
+#
+# Notes:
+#
+# The available debug levels are:
+#
+# debug 1 # Log the destination for each request Privoxy let through. See also debug 1024.
+# debug 2 # show each connection status
+# debug 4 # show I/O status
+# debug 8 # show header parsing
+# debug 16 # log all data written to the network into the logfile
+# debug 32 # debug force feature
+# debug 64 # debug regular expression filters
+# debug 128 # debug redirects
+# debug 256 # debug GIF de-animation
+# debug 512 # Common Log Format
+# debug 1024 # Log the destination for requests Privoxy didn't let through, and the reason why.
+# debug 2048 # CGI user interface
+# debug 4096 # Startup banner and warnings.
+# debug 8192 # Non-fatal errors
+#
+#
+# To select multiple debug levels, you can either add them or
+# use multiple debug lines.
+#
+# A debug level of 1 is informative because it will show you each
+# request as it happens. 1, 4096 and 8192 are recommended so that
+# you will notice when things go wrong. The other levels are
+# probably only of interest if you are hunting down a specific
+# problem. They can produce a hell of an output (especially 16).
+#
+# Privoxy used to ship with the debug levels recommended above
+# enabled by default, but due to privacy concerns 3.0.7 and later
+# are configured to only log fatal errors.
+#
+# If you are used to the more verbose settings, simply enable
+# the debug lines below again.
+#
+# If you want to use pure CLF (Common Log Format), you should set
+# "debug 512" ONLY and not enable anything else.
+#
+# Privoxy has a hard-coded limit for the length of log messages. If
+# it's reached, messages are logged truncated and marked with
+# "... [too long, truncated]".
+#
+# Please don't file any support requests without trying to
+# reproduce the problem with increased debug level first. Once
+# you read the log messages, you may even be able to solve the
+# problem on your own.
+#
+#debug 1 # Log the destination for each request Privoxy let through.
+#debug 1024 # Log the destination for requests Privoxy didn't let through, and the reason why.
+#debug 4096 # Startup banner and warnings
+#debug 8192 # Non-fatal errors
+#
+#
+# 3.2. single-threaded
+# =====================
+#
+# Specifies:
+#
+# Whether to run only one server thread.
+#
+# Type of value:
+#
+# None
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# Multi-threaded (or, where unavailable: forked) operation,
+# i.e. the ability to serve multiple requests simultaneously.
+#
+# Notes:
+#
+# This option is only there for debugging purposes. It will
+# drastically reduce performance.
#
#single-threaded
-
-# Toggle flag. 0 => disabled, anything else (ie. 1) => enabled
-toggle 1
-
-
-# Win32 GUI specific options. Moved here from ijbw32.ini
-# in hopes of keep all of our config settings together.
-
-activity-animation 1
-log-messages 1
-log-highlight-messages 1
-log-buffer-size 1
-log-max-lines 200
-log-font-name Comic Sans MS
-log-font-size 8
-show-on-task-bar 0
-close-button-minimizes 1
-
-# hide-console is used only on Win32 console mode. It instructs
-# the Internet Junkbuster to disconnect from and hide the
-# command console.
+#
+#
+# 3.3. hostname
+# ==============
+#
+# Specifies:
+#
+# The hostname shown on the CGI pages.
+#
+# Type of value:
+#
+# Text
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# The hostname provided by the operating system is used.
+#
+# Notes:
+#
+# On some misconfigured systems resolving the hostname fails or
+# takes too much time and slows Privoxy down. Setting a fixed
+# hostname works around the problem.
+#
+# In other circumstances it might be desirable to show a hostname
+# other than the one returned by the operating system. For example
+# if the system has several different hostnames and you don't
+# want to use the first one.
+#
+# Note that Privoxy does not validate the specified hostname value.
+#
+#hostname hostname.example.org
+#
+#
+# 4. ACCESS CONTROL AND SECURITY
+# ===============================
+#
+# This section of the config file controls the security-relevant
+# aspects of Privoxy's configuration.
+#
+#
+#
+# 4.1. listen-address
+# ====================
+#
+# Specifies:
+#
+# The IP address and TCP port on which Privoxy will listen for
+# client requests.
+#
+# Type of value:
+#
+# [IP-Address]:Port
+#
+# Default value:
+#
+# 127.0.0.1:8118
+#
+# Effect if unset:
+#
+# Bind to 127.0.0.1 (localhost), port 8118. This is suitable and
+# recommended for home users who run Privoxy on the same machine
+# as their browser.
+#
+# Notes:
+#
+# You will need to configure your browser(s) to this proxy address
+# and port.
+#
+# If you already have another service running on port 8118, or
+# if you want to serve requests from other machines (e.g. on your
+# local network) as well, you will need to override the default.
+#
+# If you leave out the IP address, Privoxy will bind to all
+# interfaces (addresses) on your machine and may become reachable
+# from the Internet. In that case, consider using access control
+# lists (ACL's, see below), and/or a firewall.
+#
+# If you open Privoxy to untrusted users, you will also
+# want to make sure that the following actions are disabled:
+# enable-edit-actions and enable-remote-toggle
+#
+# Example:
+#
+# Suppose you are running Privoxy on a machine which has the
+# address 192.168.0.1 on your local private network (192.168.0.0)
+# and has another outside connection with a different address. You
+# want it to serve requests from inside only:
+#
+# listen-address 192.168.0.1:8118
+#
+#
+listen-address 127.0.0.1:8118
+#
+#
+# 4.2. toggle
+# ============
+#
+# Specifies:
+#
+# Initial state of "toggle" status
+#
+# Type of value:
+#
+# 1 or 0
+#
+# Default value:
+#
+# 1
+#
+# Effect if unset:
+#
+# Act as if toggled on
+#
+# Notes:
+#
+# If set to 0, Privoxy will start in "toggled off" mode,
+# i.e. mostly behave like a normal, content-neutral proxy
+# with both ad blocking and content filtering disabled. See
+# enable-remote-toggle below.
+#
+# The windows version will only display the toggle icon in the
+# system tray if this option is present.
+#
+toggle 1
+#
+#
+# 4.3. enable-remote-toggle
+# ==========================
+#
+# Specifies:
+#
+# Whether or not the web-based toggle feature may be used
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# The web-based toggle feature is disabled.
+#
+# Notes:
+#
+# When toggled off, Privoxy mostly acts like a normal,
+# content-neutral proxy, i.e. doesn't block ads or filter content.
+#
+# Access to the toggle feature can not be controlled separately by
+# "ACLs" or HTTP authentication, so that everybody who can access
+# Privoxy (see "ACLs" and listen-address above) can toggle it
+# for all users. So this option is not recommended for multi-user
+# environments with untrusted users.
+#
+# Note that malicious client side code (e.g Java) is also capable
+# of using this option.
+#
+# As a lot of Privoxy users don't read documentation, this feature
+# is disabled by default.
+#
+# Note that you must have compiled Privoxy with support for this
+# feature, otherwise this option has no effect.
+#
+enable-remote-toggle 0
+#
+#
+# 4.4. enable-remote-http-toggle
+# ===============================
+#
+# Specifies:
+#
+# Whether or not Privoxy recognizes special HTTP headers to change
+# its behaviour.
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# Privoxy ignores special HTTP headers.
+#
+# Notes:
+#
+# When toggled on, the client can change Privoxy's behaviour by
+# setting special HTTP headers. Currently the only supported
+# special header is "X-Filter: No", to disable filtering for
+# the ongoing request, even if it is enabled in one of the
+# action files.
+#
+# This feature is disabled by default. If you are using Privoxy in
+# a environment with trusted clients, you may enable this feature
+# at your discretion. Note that malicious client side code (e.g
+# Java) is also capable of using this feature.
+#
+# This option will be removed in future releases as it has been
+# obsoleted by the more general header taggers.
+#
+enable-remote-http-toggle 0
+#
+#
+# 4.5. enable-edit-actions
+# =========================
+#
+# Specifies:
+#
+# Whether or not the web-based actions file editor may be used
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# The web-based actions file editor is disabled.
+#
+# Notes:
+#
+# Access to the editor can not be controlled separately by
+# "ACLs" or HTTP authentication, so that everybody who can access
+# Privoxy (see "ACLs" and listen-address above) can modify its
+# configuration for all users.
+#
+# This option is not recommended for environments with untrusted
+# users and as a lot of Privoxy users don't read documentation,
+# this feature is disabled by default.
+#
+# Note that malicious client side code (e.g Java) is also capable
+# of using the actions editor and you shouldn't enable this
+# options unless you understand the consequences and are sure
+# your browser is configured correctly.
+#
+# Note that you must have compiled Privoxy with support for this
+# feature, otherwise this option has no effect.
+#
+enable-edit-actions 0
+#
+#
+# 4.6. enforce-blocks
+# ====================
+#
+# Specifies:
+#
+# Whether the user is allowed to ignore blocks and can "go there
+# anyway".
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# Blocks are not enforced.
+#
+# Notes:
+#
+# Privoxy is mainly used to block and filter requests as a service
+# to the user, for example to block ads and other junk that clogs
+# the pipes. Privoxy's configuration isn't perfect and sometimes
+# innocent pages are blocked. In this situation it makes sense to
+# allow the user to enforce the request and have Privoxy ignore
+# the block.
+#
+# In the default configuration Privoxy's "Blocked" page contains
+# a "go there anyway" link to adds a special string (the force
+# prefix) to the request URL. If that link is used, Privoxy
+# will detect the force prefix, remove it again and let the
+# request pass.
+#
+# Of course Privoxy can also be used to enforce a network
+# policy. In that case the user obviously should not be able to
+# bypass any blocks, and that's what the "enforce-blocks" option
+# is for. If it's enabled, Privoxy hides the "go there anyway"
+# link. If the user adds the force prefix by hand, it will not
+# be accepted and the circumvention attempt is logged.
+#
+# Examples:
+#
+# enforce-blocks 1
+#
+enforce-blocks 0
+#
+#
+# 4.7. ACLs: permit-access and deny-access
+# =========================================
+#
+# Specifies:
+#
+# Who can access what.
+#
+# Type of value:
+#
+# src_addr[/src_masklen] [dst_addr[/dst_masklen]]
+#
+# Where src_addr and dst_addr are IP addresses in dotted decimal
+# notation or valid DNS names, and src_masklen and dst_masklen are
+# subnet masks in CIDR notation, i.e. integer values from 2 to 30
+# representing the length (in bits) of the network address. The
+# masks and the whole destination part are optional.
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# Don't restrict access further than implied by listen-address
+#
+# Notes:
+#
+# Access controls are included at the request of ISPs and systems
+# administrators, and are not usually needed by individual
+# users. For a typical home user, it will normally suffice to
+# ensure that Privoxy only listens on the localhost (127.0.0.1)
+# or internal (home) network address by means of the listen-address
+# option.
+#
+# Please see the warnings in the FAQ that Privoxy is not intended
+# to be a substitute for a firewall or to encourage anyone to
+# defer addressing basic security weaknesses.
+#
+# Multiple ACL lines are OK. If any ACLs are specified, Privoxy
+# only talks to IP addresses that match at least one permit-access
+# line and don't match any subsequent deny-access line. In other
+# words, the last match wins, with the default being deny-access.
+#
+# If Privoxy is using a forwarder (see forward below) for a
+# particular destination URL, the dst_addr that is examined is
+# the address of the forwarder and NOT the address of the ultimate
+# target. This is necessary because it may be impossible for the
+# local Privoxy to determine the IP address of the ultimate target
+# (that's often what gateways are used for).
+#
+# You should prefer using IP addresses over DNS names, because
+# the address lookups take time. All DNS names must resolve! You
+# can not use domain patterns like "*.org" or partial domain
+# names. If a DNS name resolves to multiple IP addresses, only
+# the first one is used.
+#
+# Denying access to particular sites by ACL may have undesired
+# side effects if the site in question is hosted on a machine
+# which also hosts other sites (most sites are).
+#
+# Examples:
+#
+# Explicitly define the default behavior if no ACL and
+# listen-address are set: "localhost" is OK. The absence of a
+# dst_addr implies that all destination addresses are OK:
+#
+# permit-access localhost
+#
+#
+# Allow any host on the same class C subnet as www.privoxy.org
+# access to nothing but www.example.com (or other domains hosted
+# on the same system):
+#
+# permit-access www.privoxy.org/24 www.example.com/32
+#
+#
+# Allow access from any host on the 26-bit subnet 192.168.45.64 to
+# anywhere, with the exception that 192.168.45.73 may not access
+# the IP address behind www.dirty-stuff.example.com:
+#
+# permit-access 192.168.45.64/26
+# deny-access 192.168.45.73 www.dirty-stuff.example.com
+#
+#
+#
+# 4.8. buffer-limit
+# ==================
+#
+# Specifies:
+#
+# Maximum size of the buffer for content filtering.
+#
+# Type of value:
+#
+# Size in Kbytes
+#
+# Default value:
+#
+# 4096
+#
+# Effect if unset:
+#
+# Use a 4MB (4096 KB) limit.
+#
+# Notes:
+#
+# For content filtering, i.e. the +filter and +deanimate-gif
+# actions, it is necessary that Privoxy buffers the entire document
+# body. This can be potentially dangerous, since a server could
+# just keep sending data indefinitely and wait for your RAM to
+# exhaust -- with nasty consequences. Hence this option.
+#
+# When a document buffer size reaches the buffer-limit, it is
+# flushed to the client unfiltered and no further attempt to filter
+# the rest of the document is made. Remember that there may be
+# multiple threads running, which might require up to buffer-limit
+# Kbytes each, unless you have enabled "single-threaded" above.
+#
+buffer-limit 4096
+#
+#
+# 5. FORWARDING
+# ==============
+#
+# This feature allows routing of HTTP requests through a chain of
+# multiple proxies.
+#
+# Forwarding can be used to chain Privoxy with a caching proxy to
+# speed up browsing. Using a parent proxy may also be necessary if
+# the machine that Privoxy runs on has no direct Internet access.
+#
+# Note that parent proxies can severely decrease your privacy
+# level. For example a parent proxy could add your IP address to the
+# request headers and if it's a caching proxy it may add the "Etag"
+# header to revalidation requests again, even though you configured
+# Privoxy to remove it. It may also ignore Privoxy's header time
+# randomization and use the original values which could be used by
+# the server as cookie replacement to track your steps between visits.
+#
+# Also specified here are SOCKS proxies. Privoxy supports the SOCKS
+# 4 and SOCKS 4A protocols.
+#
+#
+#
+# 5.1. forward
+# =============
+#
+# Specifies:
+#
+# To which parent HTTP proxy specific requests should be routed.
+#
+# Type of value:
+#
+# target_pattern http_parent[:port]
+#
+# where target_pattern is a URL pattern that specifies to which
+# requests (i.e. URLs) this forward rule shall apply. Use /
+# to denote "all URLs". http_parent[:port] is the DNS name or
+# IP address of the parent HTTP proxy through which the requests
+# should be forwarded, optionally followed by its listening port
+# (default: 8080). Use a single dot (.) to denote "no forwarding".
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# Don't use parent HTTP proxies.
+#
+# Notes:
+#
+# If http_parent is ".", then requests are not forwarded to
+# another HTTP proxy but are made directly to the web servers.
+#
+# Multiple lines are OK, they are checked in sequence, and the
+# last match wins.
+#
+# Examples:
+#
+# Everything goes to an example parent proxy, except SSL on port
+# 443 (which it doesn't handle):
+#
+# forward / parent-proxy.example.org:8080
+# forward :443 .
+#
+#
+# Everything goes to our example ISP's caching proxy, except for
+# requests to that ISP's sites:
+#
+# forward / caching-proxy.isp.example.net:8000
+# forward .isp.example.net .
+#
+#
+#
+#
+# 5.2. forward-socks4, forward-socks4a and forward-socks5
+# ========================================================
+#
+# Specifies:
+#
+# Through which SOCKS proxy (and optionally to which parent HTTP
+# proxy) specific requests should be routed.
+#
+# Type of value:
+#
+# target_pattern socks_proxy[:port] http_parent[:port]
+#
+# where target_pattern is a URL pattern that specifies to which
+# requests (i.e. URLs) this forward rule shall apply. Use / to
+# denote "all URLs". http_parent and socks_proxy are IP addresses
+# in dotted decimal notation or valid DNS names (http_parent may
+# be "." to denote "no HTTP forwarding"), and the optional port
+# parameters are TCP ports, i.e. integer values from 1 to 65535
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# Don't use SOCKS proxies.
+#
+# Notes:
+#
+# Multiple lines are OK, they are checked in sequence, and the
+# last match wins.
+#
+# The difference between forward-socks4 and forward-socks4a
+# is that in the SOCKS 4A protocol, the DNS resolution of the
+# target hostname happens on the SOCKS server, while in SOCKS 4
+# it happens locally.
+#
+# With forward-socks5 the DNS resolution will happen on the remote
+# server as well.
+#
+# If http_parent is ".", then requests are not forwarded to another
+# HTTP proxy but are made (HTTP-wise) directly to the web servers,
+# albeit through a SOCKS proxy.
+#
+# Examples:
+#
+# From the company example.com, direct connections are made to all
+# "internal" domains, but everything outbound goes through their
+# ISP's proxy by way of example.com's corporate SOCKS 4A gateway
+# to the Internet.
+#
+# forward-socks4a / socks-gw.example.com:1080 www-cache.isp.example.net:8080
+# forward .example.com .
+#
+#
+# A rule that uses a SOCKS 4 gateway for all destinations but no
+# HTTP parent looks like this:
+#
+# forward-socks4 / socks-gw.example.com:1080 .
+#
+#
+# To chain Privoxy and Tor, both running on the same system,
+# you would use something like:
+#
+# forward-socks4a / 127.0.0.1:9050 .
+#
+#
+# The public Tor network can't be used to reach your local network,
+# if you need to access local servers you therefore might want
+# to make some exceptions:
+#
+# forward 192.168.*.*/ .
+# forward 10.*.*.*/ .
+# forward 127.*.*.*/ .
+#
+#
+# Unencrypted connections to systems in these address ranges will
+# be as (un) secure as the local network is, but the alternative
+# is that you can't reach the local network through Privoxy at
+# all. Of course this may actually be desired and there is no
+# reason to make these exceptions if you aren't sure you need them.
+#
+# If you also want to be able to reach servers in your local
+# network by using their names, you will need additional exceptions
+# that look like this:
+#
+# forward localhost/ .
+#
+#
+#
+#
+# 5.3. forwarded-connect-retries
+# ===============================
+#
+# Specifies:
+#
+# How often Privoxy retries if a forwarded connection request
+# fails.
+#
+# Type of value:
+#
+# Number of retries.
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# Connections forwarded through other proxies are treated like
+# direct connections and no retry attempts are made.
+#
+# Notes:
+#
+# forwarded-connect-retries is mainly interesting for socks4a
+# connections, where Privoxy can't detect why the connections
+# failed. The connection might have failed because of a DNS timeout
+# in which case a retry makes sense, but it might also have failed
+# because the server doesn't exist or isn't reachable. In this
+# case the retry will just delay the appearance of Privoxy's
+# error message.
+#
+# Note that in the context of this option, "forwarded connections"
+# includes all connections that Privoxy forwards through other
+# proxies. This option is not limited to the HTTP CONNECT method.
+#
+# Only use this option, if you are getting lots of
+# forwarding-related error messages that go away when you try again
+# manually. Start with a small value and check Privoxy's logfile
+# from time to time, to see how many retries are usually needed.
+#
+# Examples:
+#
+# forwarded-connect-retries 1
+#
+forwarded-connect-retries 0
+#
+#
+# 5.4. accept-intercepted-requests
+# =================================
+#
+# Specifies:
+#
+# Whether intercepted requests should be treated as valid.
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# Only proxy requests are accepted, intercepted requests are
+# treated as invalid.
+#
+# Notes:
+#
+# If you don't trust your clients and want to force them to use
+# Privoxy, enable this option and configure your packet filter
+# to redirect outgoing HTTP connections into Privoxy.
+#
+# Make sure that Privoxy's own requests aren't redirected as well.
+# Additionally take care that Privoxy can't intentionally connect
+# to itself, otherwise you could run into redirection loops if
+# Privoxy's listening port is reachable by the outside or an
+# attacker has access to the pages you visit.
+#
+# Examples:
+#
+# accept-intercepted-requests 1
+#
+accept-intercepted-requests 0
+#
+#
+# 5.5. allow-cgi-request-crunching
+# =================================
+#
+# Specifies:
+#
+# Whether requests to Privoxy's CGI pages can be blocked or
+# redirected.
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# Privoxy ignores block and redirect actions for its CGI pages.
+#
+# Notes:
+#
+# By default Privoxy ignores block or redirect actions for
+# its CGI pages. Intercepting these requests can be useful in
+# multi-user setups to implement fine-grained access control,
+# but it can also render the complete web interface useless and
+# make debugging problems painful if done without care.
+#
+# Don't enable this option unless you're sure that you really
+# need it.
+#
+# Examples:
+#
+# allow-cgi-request-crunching 1
+#
+allow-cgi-request-crunching 0
+#
+#
+# 5.6. split-large-forms
+# =======================
+#
+# Specifies:
+#
+# Whether the CGI interface should stay compatible with broken
+# HTTP clients.
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# The CGI form generate long GET URLs.
+#
+# Notes:
+#
+# Privoxy's CGI forms can lead to rather long URLs. This isn't
+# a problem as far as the HTTP standard is concerned, but it can
+# confuse clients with arbitrary URL length limitations.
+#
+# Enabling split-large-forms causes Privoxy to divide big forms
+# into smaller ones to keep the URL length down. It makes editing
+# a lot less convenient and you can no longer submit all changes
+# at once, but at least it works around this browser bug.
+#
+# If you don't notice any editing problems, there is no reason
+# to enable this option, but if one of the submit buttons appears
+# to be broken, you should give it a try.
+#
+# Examples:
+#
+# split-large-forms 1
+#
+split-large-forms 0
+#
+#
+# 5.7. keep-alive-timeout
+# ========================
+#
+# Specifies:
+#
+# Number of seconds after which an open connection will no longer
+# be reused.
+#
+# Type of value:
+#
+# Time in seconds.
+#
+# Default value:
+#
+# None
+#
+# Effect if unset:
+#
+# Connections are not reused.
+#
+# Notes:
+#
+# This option has no effect if Privoxy has been compiled without
+# keep-alive support.
+#
+# Notes:
+#
+# Note that reusing connections doesn't necessary cause
+# speedups. There are also a few privacy implications you should
+# be aware of.
+#
+# Outgoing connections are shared between clients (if there are
+# more than one) and closing the client that initiated the outgoing
+# connection does not affect the connection between Privoxy and
+# the server unless the client's request hasn't been completed
+# yet. If the outgoing connection is idle, it will not be closed
+# until either Privoxy's or the server's timeout is reached. While
+# it's open, the server knows that the system running Privoxy is
+# still there.
+#
+# Examples:
+#
+# keep-alive-timeout 300
+#
+keep-alive-timeout 300
+#
+#
+# 5.8. socket-timeout
+# ====================
+#
+# Specifies:
+#
+# Number of seconds after which a socket times out if no data
+# is received.
+#
+# Type of value:
+#
+# Time in seconds.
+#
+# Default value:
+#
+# None
+#
+# Effect if unset:
+#
+# A default value of 300 seconds is used.
+#
+# Notes:
+#
+# For SOCKS requests the timeout currently doesn't start until
+# the SOCKS server accepted the request. This will be fixed in
+# the next release.
+#
+# Examples:
+#
+# socket-timeout 300
+#
+socket-timeout 300
+#
+#
+# 6. WINDOWS GUI OPTIONS
+# =======================
+#
+# Privoxy has a number of options specific to the Windows GUI
+# interface:
+#
+#
+# If "activity-animation" is set to 1, the Privoxy icon will animate
+# when "Privoxy" is active. To turn off, set to 0.
+#
+#activity-animation 1
+#
+# If "log-messages" is set to 1, Privoxy will log messages to the
+# console window:
+#
+#log-messages 1
+#
+# If "log-buffer-size" is set to 1, the size of the log buffer,
+# i.e. the amount of memory used for the log messages displayed in
+# the console window, will be limited to "log-max-lines" (see below).
+#
+# Warning: Setting this to 0 will result in the buffer to grow
+# infinitely and eat up all your memory!
+#
+#log-buffer-size 1
+#
+# log-max-lines is the maximum number of lines held in the log
+# buffer. See above.
+#
+#log-max-lines 200
+#
+# If "log-highlight-messages" is set to 1, Privoxy will highlight
+# portions of the log messages with a bold-faced font:
+#
+#log-highlight-messages 1
+#
+# The font used in the console window:
+#
+#log-font-name Comic Sans MS
+#
+# Font size used in the console window:
+#
+#log-font-size 8
+#
+# "show-on-task-bar" controls whether or not Privoxy will appear as
+# a button on the Task bar when minimized:
+#
+#show-on-task-bar 0
+#
+# If "close-button-minimizes" is set to 1, the Windows close button
+# will minimize Privoxy instead of closing the program (close with
+# the exit option on the File menu).
+#
+#close-button-minimizes 1
+#
+# The "hide-console" option is specific to the MS-Win console version
+# of Privoxy. If this option is used, Privoxy will disconnect from
+# and hide the command console.
#
#hide-console
-
-
+#
+#
projects / privoxy.git / blobdiff