-# Sample Configuration File for Privoxy v3.0.4
+# Sample Configuration File for Privoxy v3.0.6
#
-# $Id: config,v 1.51 2006/09/04 18:09:05 hal9 Exp $
+# $Id: config,v 1.56 2006/11/14 01:54:36 hal9 Exp $
#
# Copyright (C) 2001-2006 Privoxy Developers http://privoxy.org
#
# I. INTRODUCTION #
# II. FORMAT OF THE CONFIGURATION FILE #
# #
-# 1. CONFIGURATION AND LOG FILE LOCATIONS #
-# 2. LOCAL SET-UP DOCUMENTATION #
+# 1. LOCAL SET-UP DOCUMENTATION #
+# 2. CONFIGURATION AND LOG FILE LOCATIONS #
# 3. DEBUGGING #
# 4. ACCESS CONTROL AND SECURITY #
# 5. FORWARDING #
#
#
-# 1. CONFIGURATION AND LOG FILE LOCATIONS
+# 1. LOCAL SET-UP DOCUMENTATION
+# =============================
+#
+# If you intend to operate Privoxy for more users than just yourself,
+# it might be a good idea to let them know how to reach you, what
+# you block and why you do that, your policies, etc.
+#
+
+#
+# 1.1. user-manual
+# ================
+#
+# Specifies:
+#
+# Location of the Privoxy User Manual.
+#
+# Type of value:
+#
+# A fully qualified URI
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# http://www.privoxy.org/version/user-manual/ will be used,
+# where version is the Privoxy version.
+#
+# Notes:
+#
+# The User Manual URI is the single best source of information on
+# Privoxy, and is used for help links from some of the internal
+# CGI pages. The manual itself is normally packaged with the
+# binary distributions, so you probably want to set this to
+# a locally installed copy. For multi-user setups, you could
+# provide a copy on a local webserver for all your users and use
+# the corresponding URL here.
+#
+# Examples:
+#
+# The best all purpose solution is simply to put the full local
+# PATH to where the User Manual is located:
+#
+# user-manual /usr/share/doc/privoxy/user-manual
+#
+# The User Manual is then available to anyone with
+# access to the proxy, by following the built-in URL:
+# http://config.privoxy.org/user-manual/ (or the shortcut:
+# http://p.p/user-manual/).
+#
+# If the documentation is not on the local system, it can be
+# accessed from a remote server, as:
+#
+# user-manual http://example.com/privoxy/user-manual/
+#
+# WARNING!!!
+#
+# If set, this option should be the first option in the config
+# file, because it is used while the config file is being read.
+#
+#user-manual http://www.privoxy.org/user-manual/
+
+#
+# 1.2. trust-info-url
+# ===================
+#
+# Specifies:
+#
+# A URL to be displayed in the error page that users will see if
+# access to an untrusted page is denied.
+#
+# Type of value:
+#
+# URL
+#
+# Default value:
+#
+# Two example URL are provided
+#
+# Effect if unset:
+#
+# No links are displayed on the "untrusted" error page.
+#
+# Notes:
+#
+# The value of this option only matters if the experimental trust
+# mechanism has been activated. (See trustfile above.)
+#
+# If you use the trust mechanism, it is a good idea to write
+# up some on-line documentation about your trust policy and to
+# specify the URL(s) here. Use multiple times for multiple URLs.
+#
+# The URL(s) should be added to the trustfile as well, so users
+# don't end up locked out from the information on why they were
+# locked out in the first place!
+#
+trust-info-url http://www.example.com/why_we_block.html
+trust-info-url http://www.example.com/what_we_allow.html
+
+#
+# 1.3. admin-address
+# ==================
+#
+# Specifies:
+#
+# An email address to reach the proxy administrator.
+#
+# Type of value:
+#
+# Email address
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# No email address is displayed on error pages and the CGI user
+# interface.
+#
+# Notes:
+#
+# If both admin-address and proxy-info-url are unset, the whole
+# "Local Privoxy Support" box on all generated pages will not
+# be shown.
+#
+#admin-address privoxy-admin@example.com
+
+#
+# 1.4. proxy-info-url
+# ===================
+#
+# Specifies:
+#
+# A URL to documentation about the local Privoxy setup,
+# configuration or policies.
+#
+# Type of value:
+#
+# URL
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# No link to local documentation is displayed on error pages and
+# the CGI user interface.
+#
+# Notes:
+#
+# If both admin-address and proxy-info-url are unset, the whole
+# "Local Privoxy Support" box on all generated pages will not
+# be shown.
+#
+# This URL shouldn't be blocked ;-)
+#
+#proxy-info-url http://www.example.com/proxy-service.html
+
+#
+# 2. CONFIGURATION AND LOG FILE LOCATIONS
# =======================================
#
# Privoxy can (and normally does) use a number of other files for
#
#
-# 1.1. confdir
+# 2.1. confdir
# ============
#
# Specifies:
confdir .
#
-# 1.2. logdir
+# 2.2. logdir
# ===========
#
# Specifies:
logdir .
#
-# 1.3. actionsfile
+# 2.3. actionsfile
# ================
#
# Specifies:
actionsfile user # User customizations
#
-# 1.4. filterfile
+# 2.4. filterfile
# ===============
#
# Specifies:
#
# Notes:
#
-# Multiple filterfiles lines are permitted.
+# Multiple filterfile lines are permitted.
#
# The filter files contain content modification rules that use
# regular expressions. These rules permit powerful changes on
#filterfile user.filter # User customizations
#
-# 1.5. logfile
+# 2.5. logfile
# ============
#
# Specifies:
logfile logfile
#
-# 1.6. jarfile
+# 2.6. jarfile
# ============
#
# Specifies:
#jarfile jarfile
#
-# 1.7. trustfile
+# 2.7. trustfile
# ==============
#
# Specifies:
#
#trustfile trust
-#
-# 2. LOCAL SET-UP DOCUMENTATION
-# =============================
-#
-# If you intend to operate Privoxy for more users than just yourself,
-# it might be a good idea to let them know how to reach you, what
-# you block and why you do that, your policies, etc.
-#
-
-#
-# 2.1. user-manual
-# ================
-#
-# Specifies:
-#
-# Location of the Privoxy User Manual.
-#
-# Type of value:
-#
-# A fully qualified URI
-#
-# Default value:
-#
-# Unset
-#
-# Effect if unset:
-#
-# http://www.privoxy.org/version/user-manual/ will be used,
-# where version is the Privoxy version.
-#
-# Notes:
-#
-# The User Manual URI is used for help links from some of the
-# internal CGI pages. The manual itself is normally packaged
-# with the binary distributions, so you probably want to set this
-# to a locally installed copy. For multi-user setups, you could
-# provide a copy on a local webserver for all your users and use
-# the corresponding URL here.
-#
-# Examples:
-#
-# Unix, in local filesystem:
-#
-# user-manual file:///usr/share/doc/privoxy-3.0.4/user-manual/
-#
-# Windows, in local filesystem, must use forward slash notation:
-#
-# user-manual file:/c:/some-dir/privoxy-3.0.4/user-manual/
-#
-# Windows, UNC notation (with forward slashes):
-#
-# user-manual
-# file://///some-server/some-path/privoxy-3.0.4/user-manual/
-#
-# Any platform, on local webserver (called "local-webserver"):
-#
-# user-manual http://local-webserver/privoxy-user-manual/
-#
-# WARNING!!!
-#
-# If set, this option should be the first option in the config
-# file, because it is used while the config file is being read.
-#
-#user-manual http://www.privoxy.org/user-manual/
-
-#
-# 2.2. trust-info-url
-# ===================
-#
-# Specifies:
-#
-# A URL to be displayed in the error page that users will see if
-# access to an untrusted page is denied.
-#
-# Type of value:
-#
-# URL
-#
-# Default value:
-#
-# Two example URL are provided
-#
-# Effect if unset:
-#
-# No links are displayed on the "untrusted" error page.
-#
-# Notes:
-#
-# The value of this option only matters if the experimental trust
-# mechanism has been activated. (See trustfile above.)
-#
-# If you use the trust mechanism, it is a good idea to write
-# up some on-line documentation about your trust policy and to
-# specify the URL(s) here. Use multiple times for multiple URLs.
-#
-# The URL(s) should be added to the trustfile as well, so users
-# don't end up locked out from the information on why they were
-# locked out in the first place!
-#
-trust-info-url http://www.example.com/why_we_block.html
-trust-info-url http://www.example.com/what_we_allow.html
-
-#
-# 2.3. admin-address
-# ==================
-#
-# Specifies:
-#
-# An email address to reach the proxy administrator.
-#
-# Type of value:
-#
-# Email address
-#
-# Default value:
-#
-# Unset
-#
-# Effect if unset:
-#
-# No email address is displayed on error pages and the CGI user
-# interface.
-#
-# Notes:
-#
-# If both admin-address and proxy-info-url are unset, the whole
-# "Local Privoxy Support" box on all generated pages will not
-# be shown.
-#
-#admin-address privoxy-admin@example.com
-
-#
-# 2.4. proxy-info-url
-# ===================
-#
-# Specifies:
-#
-# A URL to documentation about the local Privoxy setup,
-# configuration or policies.
-#
-# Type of value:
-#
-# URL
-#
-# Default value:
-#
-# Unset
-#
-# Effect if unset:
-#
-# No link to local documentation is displayed on error pages and
-# the CGI user interface.
-#
-# Notes:
-#
-# If both admin-address and proxy-info-url are unset, the whole
-# "Local Privoxy Support" box on all generated pages will not
-# be shown.
-#
-# This URL shouldn't be blocked ;-)
-#
-#proxy-info-url http://www.example.com/proxy-service.html
-
#
# 3. DEBUGGING
# ============
#
# The available debug levels are:
#
-# debug 1 # show each GET/POST/CONNECT request
-# debug 2 # show each connection status
-# debug 4 # show I/O status
-# debug 8 # show header parsing
-# debug 16 # log all data into the logfile
-# debug 32 # debug force feature
-# debug 64 # debug regular expression filter
-# debug 128 # debug fast redirects
-# debug 256 # debug GIF de-animation
-# debug 512 # Common Log Format
-# debug 1024 # debug kill pop-ups
-# debug 2048 # CGI user interface
-# debug 4096 # Startup banner and warnings.
-# debug 8192 # Non-fatal errors
+# debug 1 # show each GET/POST/CONNECT request
+# debug 2 # show each connection status
+# debug 4 # show I/O status
+# debug 8 # show header parsing
+# debug 16 # log all data into the logfile
+# debug 32 # debug force feature
+# debug 64 # debug regular expression filter
+# debug 128 # debug fast redirects
+# debug 256 # debug GIF de-animation
+# debug 512 # Common Log Format
+# debug 1024 # debug kill pop-ups
+# debug 2048 # CGI user interface
+# debug 4096 # Startup banner and warnings.
+# debug 8192 # Non-fatal errors
#
# To select multiple debug levels, you can either add them or
# use multiple debug lines.
enable-remote-toggle 1
#
-# 4.4. enable-edit-actions
+# 4.4. enable-remote-http-toggle
+# ==============================
+#
+# Specifies:
+#
+# Whether or not Privoxy recognizes special HTTP headers to change
+# its behaviour.
+#
+# Type of value:
+#
+# 0 or 1
+#
+# Default value:
+#
+# 1
+#
+# Effect if unset:
+#
+# Privoxy ignores special HTTP headers.
+#
+# Notes:
+#
+# When toggled on, the client can change Privoxy's behaviour by
+# setting special HTTP headers. Currently the only supported
+# special header is "X-Filter: No", to disable filtering for
+# the ongoing request, even if it is enabled in one of the
+# action files.
+#
+# If you are using Privoxy in a multi-user environment or with
+# untrustworthy clients and want to enforce filtering, you will
+# have to disable this option, otherwise you can ignore it.
+#
+enable-remote-http-toggle 1
+
+#
+# 4.5. enable-edit-actions
# ========================
#
# Specifies:
enable-edit-actions 1
#
-# 4.5. ACLs: permit-access and deny-access
+# 4.6. ACLs: permit-access and deny-access
# ========================================
#
# Specifies:
# Allow any host on the same class C subnet as www.privoxy.org
# access to nothing but www.example.com:
#
-# permit-access www.privoxy.org/24 www.example.com/32
+# permit-access www.privoxy.org/24 www.example.com/32
#
# Allow access from any host on the 26-bit subnet 192.168.45.64
# to anywhere, with the exception that 192.168.45.73 may not
# access www.dirty-stuff.example.com:
#
-# permit-access 192.168.45.64/26
+# permit-access 192.168.45.64/26
# deny-access 192.168.45.73 www.dirty-stuff.example.com
#
#
-# 4.6. buffer-limit
+# 4.7. buffer-limit
# =================
#
# Specifies:
# This feature allows routing of HTTP requests through a chain
# of multiple proxies. It can be used to better protect privacy
# and confidentiality when accessing specific domains by routing
-# requests to those domains through an anonymous public proxy (see
-# e.g. http://www.multiproxy.org/anon_list.htm) Or to use a caching
-# proxy to speed up browsing. Or chaining to a parent proxy may be
-# necessary because the machine that Privoxy runs on has no direct
-# Internet access.
+# requests to those domains through an anonymous public proxy.
+# Or to use a caching proxy to speed up browsing. Or chaining to
+# a parent proxy may be necessary because the machine that Privoxy
+# runs on has no direct Internet access.
#
# Also specified here are SOCKS proxies. Privoxy supports the SOCKS
# 4 and SOCKS 4A protocols.
# Everything goes to an example anonymizing proxy, except SSL on
# port 443 (which it doesn't handle):
#
-# forward / anon-proxy.example.org:8080
+# forward / anon-proxy.example.org:8080
# forward :443 .
#
# Everything goes to our example ISP's caching proxy, except for
# ISP's proxy by way of example.com's corporate SOCKS 4A gateway
# to the Internet.
#
-# forward-socks4a / socks-gw.example.com:1080 www-cache.example-isp.net:8080
-# forward .example.com .
+# forward-socks4a / socks-gw.example.com:1080 www-cache.example-isp.net:8080
+# forward .example.com .
#
# A rule that uses a SOCKS 4 gateway for all destinations but no
# HTTP parent looks like this:
#
-# forward-socks4 / socks-gw.example.com:1080 .
+# forward-socks4 / socks-gw.example.com:1080 .
#
# To chain Privoxy and Tor, both running on the same system,
# you should use the rule:
#
-# forward-socks4 / 127.0.0.1:9050 .
+# forward-socks4a / 127.0.0.1:9050 .
#
# The public Tor network can't be used to reach your local network,
# therefore it's a good idea to make some exceptions:
#
-# forward 192.168.*.*/ .
-# forward 10.*.*.*/ .
-# forward 127.*.*.*/ .
+# forward 192.168.*.*/ .
+# forward 10.*.*.*/ .
+# forward 127.*.*.*/ .
#
# Unencrypted connections to systems in these address ranges will
-# be as (un)secure as the local network is, but the alternative
-# is that you can't reach the network at all.
+# be as (un)secure as the local network is, but the alternative is
+# that you can't reach the network at all.
#
# If you also want to be able to reach servers in your local
-# network by using their names, you will need additional exceptions
-# that look like this:
+# network by using their names, you will need additional
+# exceptions that look like this:
+#
+# forward localhost/ .
+#
+
+#
+# 5.3. forwarded-connect-retries
+# ==============================
+#
+# Specifies:
+#
+# How often Privoxy retries if a forwarded connection request
+# fails.
+#
+# Type of value:
+#
+# Number of retries.
+#
+# Default value:
+#
+# 0
+#
+# Effect if unset:
+#
+# Forwarded connections are treated like direct connections and
+# no retry attempts are made.
+#
+# Notes:
+#
+# forwarded-connect-retries is mainly interesting for socks4a
+# connections, where Privoxy can't detect why the connections
+# failed. The connection might have failed because of a DNS timeout
+# in which case a retry makes sense, but it might also have failed
+# because the server doesn't exist or isn't reachable. In this
+# case the retry will just delay the appearance of Privoxy's
+# error message.
+#
+# Only use this option, if you are getting many forwarding related
+# error messages, that go away when you try again manually. Start
+# with a small value and check Privoxy's logfile from time to time,
+# to see how many retries are usually needed.
+#
+# Examples:
#
-# forward localhost/ .
+# forwarded-connect-retries 1
#
+forwarded-connect-retries 0
#
# 6. WINDOWS GUI OPTIONS
projects / privoxy.git / blobdiff