-# Sample Configuration File for Privoxy 3.0.32
+# Sample Configuration File for Privoxy 3.0.33
#
# Copyright (C) 2001-2021 Privoxy Developers https://www.privoxy.org/
#
# each request as it happens. 1, 1024, 4096 and 8192 are
# recommended so that you will notice when things go wrong. The
# other levels are probably only of interest if you are hunting
-# down a specific problem. They can produce a hell of an output
+# down a specific problem. They can produce a lot of output
# (especially 16).
#
# If you are used to the more verbose settings, simply enable
# consider using access control lists (ACL's, see below), and/or
# a firewall.
#
-# If you open Privoxy to untrusted users, you will also want to
-# make sure that the following actions are disabled:
+# If you open Privoxy to untrusted users, you should also make
+# sure that the following actions are disabled:
# enable-edit-actions and enable-remote-toggle
#
# Example:
# might want to make some exceptions:
#
# forward 192.168.*.*/ .
-# forward 10.*.*.*/ .
-# forward 127.*.*.*/ .
+# forward 10.*.*.*/ .
+# forward 127.*.*.*/ .
#
# Unencrypted connections to systems in these address ranges
# will be as (un)secure as the local network is, but the
# network by using their names, you will need additional
# exceptions that look like this:
#
-# forward localhost/ .
+# forward localhost/ .
#
#
# 5.3. forwarded-connect-retries
# speedups. There are also a few privacy implications you should
# be aware of.
#
-# If this option is effective, outgoing connections are shared
+# If this option is enabled, outgoing connections are shared
# between clients (if there are more than one) and closing the
-# browser that initiated the outgoing connection does no longer
-# affect the connection between Privoxy and the server unless
-# the client's request hasn't been completed yet.
+# browser that initiated the outgoing connection does not affect
+# the connection between Privoxy and the server unless the
+# client's request hasn't been completed yet.
#
# If the outgoing connection is idle, it will not be closed
# until either Privoxy's or the server's timeout is reached.
#
# 128
#
-# Effect if unset:
+# Notes:
#
# Connections are served until a resource limit is reached.
#
-# Notes:
-#
# Privoxy creates one thread (or process) for every incoming
# client connection that isn't rejected based on the access
# control settings.
#
# Examples:
#
-# # Best speed (compared to the other levels)
-# compression-level 1
+# # Best speed (compared to the other levels)
+# compression-level 1
#
-# # Best compression
-# compression-level 9
-#
-# # No compression. Only useful for testing as the added header
-# # slightly increases the amount of data that has to be sent.
-# # If your benchmark shows that using this compression level
-# # is superior to using no compression at all, the benchmark
-# # is likely to be flawed.
-# compression-level 0
+# # Best compression
+# compression-level 9
#
+# # No compression. Only useful for testing as the added header
+# # slightly increases the amount of data that has to be sent.
+# # If your benchmark shows that using this compression level
+# # is superior to using no compression at all, the benchmark
+# # is likely to be flawed.
+# compression-level 0
#
#compression-level 1
#
# client-tag-lifetime 180
#
#
-#
# 6.18. trust-x-forwarded-for
# ============================
#
# trust-x-forwarded-for 1
#
#
-#
# 6.19. receive-buffer-size
# ==========================
#
# Examples:
#
# # Explicitly set a couple of ciphers with names used by MbedTLS
-# cipher-list cipher-list TLS-ECDHE-RSA-WITH-CHACHA20-POLY1305-SHA256:\
-# TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256:\
-# TLS-DHE-RSA-WITH-CHACHA20-POLY1305-SHA256:\
-# TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256:\
-# TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384:\
-# TLS-ECDHE-ECDSA-WITH-AES-256-CCM:\
-# TLS-ECDHE-ECDSA-WITH-AES-256-CCM-8:\
-# TLS-ECDHE-ECDSA-WITH-AES-128-CCM:\
-# TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8:\
-# TLS-ECDHE-ECDSA-WITH-CAMELLIA-128-GCM-SHA256:\
-# TLS-ECDHE-ECDSA-WITH-CAMELLIA-256-GCM-SHA384:\
-# TLS-ECDHE-RSA-WITH-AES-128-GCM-SHA256:\
-# TLS-ECDHE-RSA-WITH-AES-256-GCM-SHA384:\
-# TLS-ECDHE-RSA-WITH-CAMELLIA-128-GCM-SHA256:\
-# TLS-ECDHE-RSA-WITH-CAMELLIA-256-GCM-SHA384:\
-# TLS-DHE-RSA-WITH-AES-256-GCM-SHA384:\
-# TLS-DHE-RSA-WITH-AES-128-GCM-SHA256:\
-# TLS-DHE-RSA-WITH-AES-256-CCM:\
-# TLS-DHE-RSA-WITH-AES-256-CCM-8:\
-# TLS-DHE-RSA-WITH-AES-128-CCM:\
-# TLS-DHE-RSA-WITH-AES-128-CCM-8:\
-# TLS-DHE-RSA-WITH-CAMELLIA-128-GCM-SHA256:\
-# TLS-DHE-RSA-WITH-CAMELLIA-256-GCM-SHA384:\
-# TLS-ECDH-RSA-WITH-AES-128-GCM-SHA256:\
-# TLS-ECDH-RSA-WITH-AES-256-GCM-SHA384:\
-# TLS-ECDH-RSA-WITH-CAMELLIA-128-GCM-SHA256:\
-# TLS-ECDH-RSA-WITH-CAMELLIA-256-GCM-SHA384:\
-# TLS-ECDH-ECDSA-WITH-AES-128-GCM-SHA256:\
-# TLS-ECDH-ECDSA-WITH-AES-256-GCM-SHA384:\
-# TLS-ECDH-ECDSA-WITH-CAMELLIA-128-GCM-SHA256:\
-# TLS-ECDH-ECDSA-WITH-CAMELLIA-256-GCM-SHA384
-#
+# cipher-list cipher-list TLS-ECDHE-RSA-WITH-CHACHA20-POLY1305-SHA256:\
+# TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256:\
+# TLS-DHE-RSA-WITH-CHACHA20-POLY1305-SHA256:\
+# TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256:\
+# TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384:\
+# TLS-ECDHE-ECDSA-WITH-AES-256-CCM:\
+# TLS-ECDHE-ECDSA-WITH-AES-256-CCM-8:\
+# TLS-ECDHE-ECDSA-WITH-AES-128-CCM:\
+# TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8:\
+# TLS-ECDHE-ECDSA-WITH-CAMELLIA-128-GCM-SHA256:\
+# TLS-ECDHE-ECDSA-WITH-CAMELLIA-256-GCM-SHA384:\
+# TLS-ECDHE-RSA-WITH-AES-128-GCM-SHA256:\
+# TLS-ECDHE-RSA-WITH-AES-256-GCM-SHA384:\
+# TLS-ECDHE-RSA-WITH-CAMELLIA-128-GCM-SHA256:\
+# TLS-ECDHE-RSA-WITH-CAMELLIA-256-GCM-SHA384:\
+# TLS-DHE-RSA-WITH-AES-256-GCM-SHA384:\
+# TLS-DHE-RSA-WITH-AES-128-GCM-SHA256:\
+# TLS-DHE-RSA-WITH-AES-256-CCM:\
+# TLS-DHE-RSA-WITH-AES-256-CCM-8:\
+# TLS-DHE-RSA-WITH-AES-128-CCM:\
+# TLS-DHE-RSA-WITH-AES-128-CCM-8:\
+# TLS-DHE-RSA-WITH-CAMELLIA-128-GCM-SHA256:\
+# TLS-DHE-RSA-WITH-CAMELLIA-256-GCM-SHA384:\
+# TLS-ECDH-RSA-WITH-AES-128-GCM-SHA256:\
+# TLS-ECDH-RSA-WITH-AES-256-GCM-SHA384:\
+# TLS-ECDH-RSA-WITH-CAMELLIA-128-GCM-SHA256:\
+# TLS-ECDH-RSA-WITH-CAMELLIA-256-GCM-SHA384:\
+# TLS-ECDH-ECDSA-WITH-AES-128-GCM-SHA256:\
+# TLS-ECDH-ECDSA-WITH-AES-256-GCM-SHA384:\
+# TLS-ECDH-ECDSA-WITH-CAMELLIA-128-GCM-SHA256:\
+# TLS-ECDH-ECDSA-WITH-CAMELLIA-256-GCM-SHA384
#
# # Explicitly set a couple of ciphers with names used by OpenSSL
-# cipher-list ECDHE-RSA-AES256-GCM-SHA384:\
-# ECDHE-ECDSA-AES256-GCM-SHA384:\
-# DH-DSS-AES256-GCM-SHA384:\
-# DHE-DSS-AES256-GCM-SHA384:\
-# DH-RSA-AES256-GCM-SHA384:\
-# DHE-RSA-AES256-GCM-SHA384:\
-# ECDH-RSA-AES256-GCM-SHA384:\
-# ECDH-ECDSA-AES256-GCM-SHA384:\
-# ECDHE-RSA-AES128-GCM-SHA256:\
-# ECDHE-ECDSA-AES128-GCM-SHA256:\
-# DH-DSS-AES128-GCM-SHA256:\
-# DHE-DSS-AES128-GCM-SHA256:\
-# DH-RSA-AES128-GCM-SHA256:\
-# DHE-RSA-AES128-GCM-SHA256:\
-# ECDH-RSA-AES128-GCM-SHA256:\
-# ECDH-ECDSA-AES128-GCM-SHA256:\
-# ECDHE-RSA-AES256-GCM-SHA384:\
-# AES128-SHA
-#
+# cipher-list ECDHE-RSA-AES256-GCM-SHA384:\
+# ECDHE-ECDSA-AES256-GCM-SHA384:\
+# DH-DSS-AES256-GCM-SHA384:\
+# DHE-DSS-AES256-GCM-SHA384:\
+# DH-RSA-AES256-GCM-SHA384:\
+# DHE-RSA-AES256-GCM-SHA384:\
+# ECDH-RSA-AES256-GCM-SHA384:\
+# ECDH-ECDSA-AES256-GCM-SHA384:\
+# ECDHE-RSA-AES128-GCM-SHA256:\
+# ECDHE-ECDSA-AES128-GCM-SHA256:\
+# DH-DSS-AES128-GCM-SHA256:\
+# DHE-DSS-AES128-GCM-SHA256:\
+# DH-RSA-AES128-GCM-SHA256:\
+# DHE-RSA-AES128-GCM-SHA256:\
+# ECDH-RSA-AES128-GCM-SHA256:\
+# ECDH-ECDSA-AES128-GCM-SHA256:\
+# ECDHE-RSA-AES256-GCM-SHA384:\
+# AES128-SHA
#
# # Use keywords instead of explicitly naming the ciphers (Does not work with MbedTLS)
-# cipher-list ALL:!EXPORT:!EXPORT40:!EXPORT56:!aNULL:!LOW:!RC4:@STRENGTH
-#
+# cipher-list ALL:!EXPORT:!EXPORT40:!EXPORT56:!aNULL:!LOW:!RC4:@STRENGTH
#
#
# 7.7. trusted-cas-file
#
#log-buffer-size 1
#
-#
-#
# log-max-lines is the maximum number of lines held in the log
# buffer. See above.
#
#log-max-lines 200
#
-#
-#
# If "log-highlight-messages" is set to 1, Privoxy will highlight
# portions of the log messages with a bold-faced font:
#
#log-highlight-messages 1
#
-#
-#
# The font used in the console window:
#
#log-font-name Comic Sans MS
#
-#
-#
# Font size used in the console window:
#
#log-font-size 8
#
-#
-#
# "show-on-task-bar" controls whether or not Privoxy will appear as
# a button on the Task bar when minimized:
#
#show-on-task-bar 0
#
-#
-#
# If "close-button-minimizes" is set to 1, the Windows close button
# will minimize Privoxy instead of closing the program (close with
# the exit option on the File menu).
#
#close-button-minimizes 1
#
-#
-#
# The "hide-console" option is specific to the MS-Win console
# version of Privoxy. If this option is used, Privoxy will
# disconnect from and hide the command console.
#hide-console
#
#
-#
projects / privoxy.git / blobdiff