-/*********************************************************************\r
- *\r
- * File : $Source: /cvsroot/ijbswa/current/README,v $\r
- *\r
- * Purpose : README file to give a short intro.\r
- *\r
- * Copyright : Written by and Copyright (C) 2001 the SourceForge\r
- * IJBSWA team. http://ijbswa.sourceforge.net\r
- *\r
- * Based on the Internet Junkbuster originally written\r
- * by and Copyright (C) 1997 Anonymous Coders and \r
- * Junkbusters Corporation. http://www.junkbusters.com\r
- *\r
- * This program is free software; you can redistribute it \r
- * and/or modify it under the terms of the GNU General\r
- * Public License as published by the Free Software\r
- * Foundation; either version 2 of the License, or (at\r
- * your option) any later version.\r
- *\r
- * This program is distributed in the hope that it will\r
- * be useful, but WITHOUT ANY WARRANTY; without even the\r
- * implied warranty of MERCHANTABILITY or FITNESS FOR A\r
- * PARTICULAR PURPOSE. See the GNU General Public\r
- * License for more details.\r
- *\r
- * The GNU General Public License should be included with\r
- * this file. If not, you can view it at\r
- * http://www.gnu.org/copyleft/gpl.html\r
- * or write to the Free Software Foundation, Inc., 59\r
- * Temple Place - Suite 330, Boston, MA 02111-1307, USA.\r
- *\r
- *********************************************************************/\r
-\f\r
-\r
-This README is included with the development version of Junkbuster,\r
-which will eventually become Junkbuster v3.0. See\r
-http://ijbswa.sourceforge.net.\r
-\r
-Internet Junkbuster is a web proxy with advanced filtering\r
-capabilities for protecting privacy and removing ads, banners, pop-ups\r
-and other obnoxious Internet Junk.\r
-\r
- INSTALL\r
---------\r
-\r
-For tarball, first unpack:\r
-\r
- tar zxvf ijb_source_*\r
- cd ijb_source_2.9.8_alpha\r
-\r
- ./configure\r
- make\r
- su\r
- make install\r
-\r
-Redhat and SuSE src and binary RPMs can be built with 'make\r
-redhat-dist' or 'make suse-dist' (run ./configure first).\r
-\r
-Junkbuster is also availabe via anonymous CVS:\r
-\r
- cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login\r
- cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa co current\r
-\r
-This will create a directory named 'current'. Then, 'cd current', and then\r
-build as above.\r
-\r
- RUN\r
-----\r
-\r
- junkbuster /etc/junkbuster/config &\r
-\r
-Or for RPMS: /etc/rc.d/init.d/junkbuster start\r
-\r
-CONFIGURATION\r
--------------\r
-\r
-See: 'config', 'actionsfile', and 're_filterfile'. There are many changes and\r
-advances since v2.0.x. Be sure to set your browsers for HTTP Proxy at\r
-localhost:8000.\r
-\r
-DOCUMENTATION\r
--------------\r
-\r
-The best source of information on the current development version, is\r
-either comments in the source code, or the included configuration\r
-files, which are all well commented. These are 'config',\r
-'actionsfile', and 're_filterfile' in the toplevel source directory.\r
-\r
-There is a growing amount of new documentation in the 'doc'\r
-subdirectory, but it is sparse at this point. In particular, see the\r
-developer-manual and user-manual there.\r
-\r
-Some legacy documentation is also included only to give an idea of\r
-what Junkbuster can do under doc/obsolete/*. Much has changed since\r
-these docs were written, so beware.\r
-\r
-BUGS\r
-----\r
-\r
-Use the form at\r
-http://sourceforge.net/tracker/index.php?group_id=11118&atid=111118 to\r
-report bugs. Please read the exising bug reports before submitting\r
-anything new.\r
-\r
--------------------------------------------------------------------------\r
-ijbswa-developers@lists.sourceforge.net\r
-\r
-$Id: README,v 1.1 2001/09/13 15:24:30 swa Exp $\r
+/*********************************************************************
+ *
+ * File : $Source: /cvsroot/ijbswa/current/doc/source/readme.sgml,v $
+ *
+ * Purpose : README file to give a short intro.
+ *
+ * Copyright : Written by and Copyright (C) 2001,2002 the SourceForge
+ * Privoxy team. http://www.privoxy.org/
+ *
+ * Based on the Internet Junkbuster originally written
+ * by and Copyright (C) 1997 Anonymous Coders and
+ * Junkbusters Corporation. http://www.junkbusters.com
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General
+ * Public License as published by the Free Software
+ * Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will
+ * be useful, but WITHOUT ANY WARRANTY; without even the
+ * implied warranty of MERCHANTABILITY or FITNESS FOR A
+ * PARTICULAR PURPOSE. See the GNU General Public
+ * License for more details.
+ *
+ * The GNU General Public License should be included with
+ * this file. If not, you can view it at
+ * http://www.gnu.org/copyleft/gpl.html
+ * or write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *********************************************************************/
+
+This README is included with the development version of Privoxy 3.1.1, which
+will someday become Privoxy v3.2. See http://www.privoxy.org/ for more
+information. The current code level is technically alpha, but is not yet
+significantly different from the 3.0.0 stable branch at this time..
+
+-------------------------------------------------------------------------------
+
+Privoxy is a web proxy with advanced filtering capabilities for protecting
+privacy, filtering web page content, managing cookies, controlling access, and
+removing ads, banners, pop-ups and other obnoxious Internet junk. Privoxy has a
+very flexible configuration and can be customized to suit individual needs and
+tastes. Privoxy has application for both stand-alone systems and multi-user
+networks.
+
+Privoxy is based on Internet Junkbuster (tm).
+
+-------------------------------------------------------------------------------
+
+1. IMPORTANT CHANGES
+
+REALLY BIG NEWS! August 2002: The long-awaited, oft-delayed stable version of
+Privoxy 3.0 is finally released! This is way behind schedule, but better late
+than never. The developers all hope the wait was worth it.
+
+NEWS! As of 03/24/02, the name of this project has been changed from ijbswa/
+Junkbuster to Privoxy. This is reflected in many of the included files.
+
+WARNING! If upgrading from earlier versions of this project via RPM packages,
+the new package will delete any previously installed 'Junkbuster' packages.
+
+IMPORTANT! READ! Configuration Change as of 17 Mar 2002: The default listening
+port is now 8118 due to conflicts with port 8000 assignment. You will need to
+change your browser if upgrading!!! And maybe firewall, etc.
+
+-------------------------------------------------------------------------------
+
+2. INSTALL
+
+To build Privoxy from source, autoconf, GNU make (gmake), and, of course, a C
+compiler like gcc are required.
+
+When building from a source tarball (either release version or nightly CVS
+tarball), first unpack the source:
+
+ tar xzvf privoxy-3.1.1-beta-src* [.tgz or .tar.gz]
+ cd privoxy-3.1.1-beta
+
+For retrieving the current CVS sources, you'll need CVS installed. Note that
+sources from CVS are development quality, and may not be stable, or well
+tested. To download CVS source:
+
+ cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login
+ cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa co current
+ cd current
+
+This will create a directory named current/, which will contain the source
+tree.
+
+Then, in either case, to build from unpacked tarball or CVS source:
+
+ autoheader
+ autoconf
+ ./configure # (--help to see options)
+ make # (the make from gnu, gmake for *BSD)
+ su
+ make -n install # (to see where all the files will go)
+ make install # (to really install)
+
++-----------------------------------------------------------------------------+
+| Warning |
+|-----------------------------------------------------------------------------|
+|The "make install" target is temporary quite broken! It is recommended to use|
+|a binary package, or do a source build, and manually install the components. |
+|Sorry. |
++-----------------------------------------------------------------------------+
+
+If you have gnu make, you can have the first four steps automatically done for
+you by just typing:
+
+ make
+
+in the freshly downloaded or unpacked source directory.
+
+For more detailed instructions on how to build Redhat and SuSE RPMs, Windows
+self-extracting installers, building on platforms with special requirements
+etc, please consult the developer manual.
+
+For binary RPM installation, and other platforms, see the user-manual as well.
+
+-------------------------------------------------------------------------------
+
+3. RUN
+
+privoxy [--help] [--version] [--no-daemon] [--pidfile PIDFILE] [--user USER
+[.GROUP]] [config_file]
+
+See the man page or User Manual for an explanation of each option, and other
+configuration and usage issues.
+
+If no config_file is specified on the command line, Privoxy will look for a
+file named 'config' in the current directory (except Win32 which will look for
+'config.txt'). If no config_file is found, Privoxy will fail to start.
+
+Or for Red Hat based distributions: /etc/rc.d/init.d/privoxy start
+
+Or for SuSE: /etc/rc.d/privoxy start
+
+Or Debian: /etc/init.d/privoxy start
+
+-------------------------------------------------------------------------------
+
+4. CONFIGURATION
+
+See: 'config', 'default.action', 'user.action', and 'default.filter'.
+'user.action' is for personal and local configuration preferences. These are
+all well commented. Most of the magic is in '*.action' files. 'user.action'
+should be used for any actions customizations. On Unix-like systems, these
+files are installed in /etc/privoxy. On Windows, then wherever the executable
+itself is installed. There are many significant changes and advances since
+Junkbuster v2.0.x. The User Manual has an explanation of all configuration
+options, and examples: http://www.privoxy.org/user-manual/.
+
+Be sure to set your browser(s) for HTTP/HTTPS Proxy at <IP>:<Port>, or whatever
+you specify in the config file under 'listen-address'. DEFAULT is localhost:
+8118. Note that Privoxy ONLY proxies HTTP (and HTTPS) traffic. Do not try it
+with FTP or other protocols for the simple reason it does not work.
+
+The actions list can be configured via the web interface accessed via http://
+p.p/, as well other options.
+
+All configuration files are subject to unannounced changes during the
+development process.
+
+-------------------------------------------------------------------------------
+
+5. DOCUMENTATION
+
+There should be documentation in the 'doc' subdirectory, but it is not
+completed at this point. In particular, see the User Manual there, the FAQ, and
+those interested in Privoxy development, should look at developer-manual.
+
+The most up to date source of information on the current development version,
+may still be either comments in the source code, or the included configuration
+files. The source and configuration files are all well commented. The main
+configuration files are: 'config', 'default.action', and 'default.filter' in
+the toplevel source directory.
+
+Included documentation may vary according to platform and packager. All
+documentation is posted on http://www.privoxy.org, in case you don't have it,
+or can't find it.
+
+-------------------------------------------------------------------------------
+
+6. CONTACTING THE DEVELOPERS, BUG REPORTING AND FEATURE REQUESTS
+
+We value your feedback. In fact, we rely on it to improve Privoxy and its
+configuration. However, please note the following hints, so we can provide you
+with the best support:
+
+-------------------------------------------------------------------------------
+
+6.1. Get Support
+
+For casual users, our support forum at SourceForge is probably best suited:
+http://sourceforge.net/tracker/?group_id=11118&atid=211118
+
+All users are of course welcome to discuss their issues on the users mailing
+list, where the developers also hang around.
+
+-------------------------------------------------------------------------------
+
+6.2. Report Bugs
+
+Please report all bugs only through our bug tracker: http://sourceforge.net/
+tracker/?group_id=11118&atid=111118.
+
+Before doing so, please make sure that the bug has not already been submitted
+and observe the additional hints at the top of the submit form.
+
+Please try to verify that it is a Privoxy bug, and not a browser or site bug
+first. If unsure, try toggling off Privoxy, and see if the problem persists.
+The appendix of the user manual also has helpful information on action
+debugging. If you are using your own custom configuration, please try the stock
+configs to see if the problem is configuration related.
+
+If not using the latest version, chances are that the bug has been found and
+fixed in the meantime. We would appreciate if you could take the time to
+upgrade to the latest version (or even the latest CVS snapshot) and verify your
+bug, but this is not required for reporting.
+
+-------------------------------------------------------------------------------
+
+6.3. Request New Features
+
+You are welcome to submit ideas on new features or other proposals for
+improvement through our feature request tracker at http://sourceforge.net/
+tracker/?atid=361118&group_id=11118.
+
+-------------------------------------------------------------------------------
+
+6.4. Report Ads or Other Actions-Related Problems
+
+Please send feedback on ads that slipped through, innocent images that were
+blocked, and any other problems relating to the default.action file through our
+actions feedback mechanism located at http://www.privoxy.org/actions/. On this
+page, you will also find a bookmark which will take you back there from any
+troubled site and even pre-fill the form!
+
+New, improved default.action files will occasionally be made available based on
+your feedback. These will be announced on the ijbswa-announce list and
+available from our the files section of our project page.
+
+-------------------------------------------------------------------------------
+
+6.5. Other
+
+For any other issues, feel free to use the mailing lists. Technically
+interested users and people who wish to contribute to the project are also
+welcome on the developers list! You can find an overview of all Privoxy-related
+mailing lists, including list archives, at: http://sourceforge.net/mail/?
+group_id=11118.
+
projects / privoxy.git / blobdiff