-# Note: Makefile is built automatically from Makefile.in
+# Note: GNUmakefile is built automatically from GNUmakefile.in
#
-# $Id: GNUmakefile.in,v 1.193 2010/11/14 14:59:33 fabiankeil Exp $
-#
-# Written by and Copyright (C) 2001-2010 members of the
-# Privoxy team. http://www.privoxy.org/
+# Written by and Copyright (C) 2001-2018 members of the
+# Privoxy team. https://www.privoxy.org/
#
# Based on the Internet Junkbuster originally written
-# by and Copyright (C) 1997 Anonymous Coders and
+# by and Copyright (C) 1997 Anonymous Coders and
# Junkbusters Corporation. http://www.junkbusters.com
#
-# This program is free software; you can redistribute it
+# This program is free software; you can redistribute it
# and/or modify it under the terms of the GNU General
# Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at
VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
SNAPVERSION = $(VERSION)-$(shell date "+%Y%m%d")
+SOURCE_DATE_EPOCH = @SOURCE_DATE_EPOCH@
+MTREE_SPEC_FILE = privoxy-$(VERSION)-$(CODE_STATUS).spec
#############################################################################
# "make install" directories and variables
SBIN_DEST = @sbindir@
MAN_DIR = @mandir@
MAN_DEST = $(MAN_DIR)/man1
+MAN_PAGE = privoxy.1
SHARE_DEST = @datadir@
DOC_DEST = $(SHARE_DEST)/doc/privoxy
VAR_DEST = @localstatedir@
LOGS_DEST = $(VAR_DEST)/log/privoxy
PIDS_DEST = $(VAR_DEST)/run
-# if $prefix = /usr/local then the default CONFDEST change from
-# CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy
+# if $prefix = /usr/local then the default CONFDEST change from
+# CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy
# by the target rule CONF_DEST
#
# also if the $prefix is /usr/local and there is no
# $(SHARE_DEST)/doc, it checks for $prefix/doc and installs there
# instead in this situation
#
-# finally if $prefix=/usr/local and VAR_DEST=$prefix/var it
+# finally if $prefix=/usr/local and VAR_DEST=$prefix/var it
# changes this to /var for storing the logs and pidfile
# used in source dir only, the install goes to $share_dest/doc/privoxy
# Binaries
BIN_MODE = 0755
# Support files, docs, etc.
-RA_MODE = 0664
+RA_MODE = 0644
# Directory
DIR_MODE = 0755
# Files daemon writes to.
RWD_MODE = 0660
-INSTALL_P = -m $(BIN_MODE)
+INSTALL_P = -m $(BIN_MODE)
INSTALL_T = -m $(RA_MODE)
INSTALL_D = -m $(DIR_MODE) -d
INSTALL_R = -m $(RWD_MODE)
# install options for superuser install
-#INSTALL_S = -g @GROUP@ -o @USER@
+#INSTALL_S = -g @GROUP@ -o @USER@
#############################################################################
# Build tools
CHOWN = chown
CHGRP = chgrp
GROUPS = groups
-WDUMP = @WDUMP@ -dump
+W3M_DUMP = @W3M@ -I ISO-8859 -O ASCII -dump
+W3M_DUMP_UTF8 = @W3M@ -I ISO-8859 -O UTF-8 -dump
+# docbook output is ISO-8859 (which is a superset of ascii)
JADECAT = @JADECAT@
JADEBIN = @JADEBIN@
+NSGMLS = @NSGMLS@
DB = $(JADEBIN) $(JADECAT) -ihtml -t sgml -D.. -d ldp.dsl\#html
+DB_TXT = $(JADEBIN) $(JADECAT) -ihtml -t sgml -D.. -d ldp.dsl\#print
+# -d dsssl_spec
+# This specifies that dsssl_spec is the system identifier of the DSSSL specification to be used.
+# ldp.dsl#html : keep '&char;' strings as is
+# ldp.dsl#print : convert '&char;' strings to ISO-8859 equivalent
+# NOTE: '-d ldp.dsl\#whatever' _MUST_ be last and _MUST NOT_ have
+# a trailing space so that '$(DB)-notoc' or '$(DB_TXT)-notoc'
+# pulls in the correct dsl stylesheet
DB2HTML = @DB2HTML@
MAN2HTML = @MAN2HTML@
G2H_CMD = groff -mandoc -Thtml
DOC_DIR = doc/source
DOC_TMP = $(DOC_DIR)/tmp
DOC_STATUS = @DOC_STATUS@
+TIDY = tidy -latin1 -q -modify -indent -wrap 120 --tidy-mark no --preserve-entities yes \
+ --mute MISSING_ATTRIBUTE --mute TRIM_EMPTY_ELEMENT
+# -latin1
+# use ISO-8859-1 for both input and output
+# docbook output is ISO-8859 and tidy assumes UTF-8
+# -q
+# suppress nonessential output
+# -modify
+# modify the original input file
+# --mute MISSING_ATTRIBUTE
+# don't show <img> lacks "alt" attribute
+# or <table> lacks "summary" attribute
+# --mute TRIM_EMPTY_ELEMENT
+# don't show trimming empty <p>
+#
+RSYNC = rsync -av -c --chmod=D755,F644
# Program to do LF->CRLF
-#
-# The sed version should be the most portable, but it doesn't for for me,
-# the other two do. FIXME.
-# - Jon
-#DOSFILTER = $(SED) -e $$'s,$$,\r,'
-#DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
DOSFILTER = $(PERL) -p -e 's/\n/\r\n/'
CVSROOT = :pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa
#TMPDIR := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX)
# If your SF user name differs from your local one,
# change this to "ssh -l sf-username"
SSH = ssh
+WWW_ROOT = /home/project-web/ijbswa
+# SourceForge login name used by the 'sf-shell' target (optional)
+SOURCE_FORGE_NAME = ''
#############################################################################
# Setup for make distribution for now.
#############################################################################
TAR_ARCH = /tmp/privoxy-$(VERSION).tar.gz
+GEN_DIST_TAR_NAME = privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS).tar
#############################################################################
# We include these files in our distributions
#############################################################################
-CONFIGS = config trust default.action match-all.action user.action default.filter user.filter
+CONFIGS = config trust default.action match-all.action \
+ user.action default.filter user.filter \
+ regression-tests.action
+
# take care that no CVS .cvsignore or other crappy files
# are included here
# and escape every '#' in the find. doh.
CONFIG_FILES = $(CONFIGS) \
- `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
+ `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS" | sort`
DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \
- `find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \
- `find doc/webserver/ -name "*.css"` \
- privoxy.1
+ `find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html" | sort` \
+ `find doc/webserver/ -name "*.css" | sort` \
+ $(MAN_PAGE)
#############################################################################
# Filenames and libraries
C_OBJS = $(C_SRC:.c=.@OBJEXT@)
C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h
+CLIENT_TAG_SRC = @FEATURE_CLIENT_TAGS_ONLY@client-tags.c
+CLIENT_TAG_OBJS = @FEATURE_CLIENT_TAGS_ONLY@client-tags.@OBJEXT@
+
+FUZZ_SRC = @FUZZ_ONLY@fuzz.c
+FUZZ_OBJS = @FUZZ_ONLY@fuzz.@OBJEXT@
+
W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c w32svrapi.c
W32_FILES = @WIN_ONLY@w32.res
W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES)
W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32
W32_INIS = @WIN_ONLY@config.txt trust.txt
+SSL_SRC = @FEATURE_HTTPS_INSPECTION_ONLY@ssl.c
+SSL_OBJS = @FEATURE_HTTPS_INSPECTION_ONLY@$(SSL_SRC:.c=.o)
+SSL_HDRS = @FEATURE_HTTPS_INSPECTION_ONLY@$(SSL_SRC:.c=.h) project.h
+
PCRS_SRC = @STATIC_PCRS_ONLY@pcrs.c
PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@)
PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h)
# PThreads library, if needed.
PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@
-SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC)
-OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS)
-HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS)
+SRCS = $(C_SRC) $(CLIENT_TAG_SRC) $(FUZZ_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC) $(SSL_SRC)
+OBJS = $(C_OBJS) $(CLIENT_TAG_OBJS) $(FUZZ_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS) $(SSL_OBJS)
+HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS) $(SSL_HDRS)
LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB)
# possibly other OSs).
SPECIAL_CFLAGS = @SPECIAL_CFLAGS@
-# Add your flags here
-OTHER_CFLAGS =
+# Add your flags here
+OTHER_CFLAGS =
CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
- @STATIC_PCRE_ONLY@ -Ipcre
+ -Imbedtls/include \
+ @STATIC_PCRE_ONLY@ -Ipcre
LDFLAGS = @LDFLAGS@ $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
#############################################################################
# Phony targets
#############################################################################
-.PHONY: all inifiles solaris-dist \
+.PHONY: all inifiles \
win-dist tarball-dist dok webserver clean clobber tags \
install CONF_DEST LOG_DEST \
PID_DEST check_doc install-strip uninstall GROUP_T
# Strip master copy comments from default.action:
#############################################################################
default.action: default.action.master
- $(GREP) -v '^#MASTER#' $< > $@
-
+ $(GREP) -v '^#MASTER#' default.action.master > $@
#############################################################################
# Win32 config files
#############################################################################
$(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
trust.txt: trust
- $(DOSFILTER) < $< > $@
+ $(DOSFILTER) < $< > $@
#############################################################################
# Pre-dist check:
#############################################################################
# create tar.gz from CVS:
-# This make-target is usually called through 'create-archive'. If you
+# This make-target is usually called through 'create-archive'. If you
# run 'make create-snapshot' without setting SNAPVERSION, you'll get a
-# tar.gz with the current date in the name and as a releasenumber in the
-# spec-file. But the main usage is to run it as follows (Red Hat example):
+# tar.gz with the current date in the name.
+# The main usage is to run it as follows (Red Hat example):
# make SNAPVERSION=1.6x create-snapshot
# This creates a tar.gz.
#############################################################################
#############################################################################
# looks at the version of Makefile and exports a corresponding source-tree
-# example: if the Makefile has the sticky tag v_2_9_13, you'll get
+# example: if the Makefile has the sticky tag v_2_9_13, you'll get
# privoxy-*-2.4.13.tar.gz.
#############################################################################
create-archive:
@$(ECHO) ""
$(MAKE) $(PROGRAM)
$(STRIP_PROG) $(PROGRAM)
- $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
+ $(LN) -s `pwd` ../privoxy-$(VERSION)-$(CODE_STATUS)
# add program
- (cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
+ (cd .. && $(TAR) --exclude "PACKAGERS" -cvhf $(GEN_DIST_TAR_NAME) privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
# add config files
for foo in $(CONFIG_FILES); do \
- (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
- done;
+ (cd .. && $(TAR) --exclude "PACKAGERS" -uvhf $(GEN_DIST_TAR_NAME) privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
+ done;
# add documentation
for foo in $(DOC_FILES); do \
- (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
+ (cd .. && $(TAR) --exclude "PACKAGERS" -uvhf $(GEN_DIST_TAR_NAME) privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
done;
+# add tools
+ (cd .. && $(TAR) -uvhf $(GEN_DIST_TAR_NAME) privoxy-$(VERSION)-$(CODE_STATUS)/tools)
# and zip the archive
$(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
- $(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar
+ $(GZIP_PROG) ../$(GEN_DIST_TAR_NAME)
@$(ECHO) Distribution with binary created.
# anonymously ncftps the package to sourceforge
gen-upload:
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../$(GEN_DIST_TAR_NAME).gz
@$(ECHO) -------------------------------------------------------
@$(ECHO) Now goto
@$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
# use with care
gen-clean:
- $(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar*
+ $(RM) ../$(GEN_DIST_TAR_NAME)*
#############################################################################
# Tarball distribution: No CVS dirs, dotfiles, debian build dir,
#############################################################################
tarball-dist: dist-check clean clobber
- $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
+ $(LN) -s `pwd` ../privoxy-$(VERSION)-$(CODE_STATUS)
for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \
-o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o \
- -name "PACKAGERS" \)`; do \
+ -name "PACKAGERS" -o -path "*.git/*" \) | sort`; do \
files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \
done && \
cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \
# and zip the archive
- $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
+ $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
$(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar
@$(ECHO) Tarball distribution created.
+# Create a mtree spec file that can be used to get a reproducible tar ball
+mtree-spec:
+ $(LN) -s `pwd` ../privoxy-$(VERSION)-$(CODE_STATUS)
+ $(ECHO) "#mtree 2.0" > $(MTREE_SPEC_FILE)
+ for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \
+ -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o \
+ -name "PACKAGERS" -o -path "*.git/*" -o -name "*.spec" \) | env -i sort`; do \
+ $(ECHO) "privoxy-$(VERSION)-$(CODE_STATUS)/$$i time=$(SOURCE_DATE_EPOCH) type=file uname=privoxy gname=privoxy mode=0555"; \
+ done >> $(MTREE_SPEC_FILE)
+ $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
+
+# Create a reproducible tarball.
+# Requires a tar implementation with mtree support.
+reproducible-tarball-dist: dist-check clean clobber mtree-spec
+ $(LN) -s `pwd` ../privoxy-$(VERSION)-$(CODE_STATUS)
+
+ $(TAR) cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar -C .. @privoxy-$(VERSION)-$(CODE_STATUS)/$(MTREE_SPEC_FILE)
+ $(GZIP_PROG) -n privoxy-$(VERSION)-$(CODE_STATUS)-src.tar
+ $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS) $(MTREE_SPEC_FILE)
+ @$(ECHO) Reproducible tarball distribution created.
+
# anonymously ncftps the tarball to sourceforge
tarball-upload:
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
#############################################################################
# developer manual
-dok-devel:
+dok-devel:
$(RM) doc/webserver/developer-manual/*.html
$(RM) -r doc/source/developer-manual
mkdir -p doc/source/developer-manual
cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/
# user manual
-dok-user:
+dok-user:
$(RM) doc/webserver/user-manual/*.html
$(RM) -r doc/source/user-manual/
mkdir -p doc/source/user-manual
# FIXME: temp fix so same stylesheet gets in more than one place so it works
# for all doc set-ups, including the 'user manual' config option in local
# system where it MUST be in same directory as html.
- $(PERL) -pi.bak -e 's/<\/head/\n<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"p_doc.css\">\n<\/head/i' doc/webserver/user-manual/*html
+ $(PERL) -pi.bak -e 's/<\/head/\n<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"p_doc.css\">\n<\/head/i' doc/webserver/user-manual/*html && \
+ rm doc/webserver/user-manual/*html.bak
# faq
-dok-faq:
+dok-faq:
$(RM) doc/webserver/faq/*.html
$(RM) -r doc/source/faq
mkdir -p doc/source/faq
cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/
-# man page, one variation. Try to use the next target, just 'make man'.
-dok-man:
+# man page, one variation. Try to use the next target, just 'make man'.
+dok-man:
$(RM) doc/man/* doc/webserver/man-page/*.html
-ifneq ($(MAN2HTML),false)
- $(ECHO) "<html><head><title>Privoxy Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html
- man ./privoxy.1 | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html
- $(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html
-else
- $(MAKE) groff2html
-endif
+ echo MAN2HTML is $(MAN2HTML)
+ @if [ $(MAN2HTML) != "false" ]; then \
+ $(ECHO) "<html><head><title>Privoxy Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html; \
+ man ./$(MAN_PAGE) | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html; \
+ $(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html; \
+ else \
+ $(MAKE) groff2html; \
+ fi;
# Build man page from sgml. This requires the SGMLSpm perl module.
-# See CPAN, or your favorite perl repository. This is the preferred
+# See CPAN, or your favorite perl repository. This is the preferred
# target for man page generation!
man: dok-release
mkdir -p doc/source/temp && cd doc/source/temp && $(RM) * ;\
- nsgmls ../privoxy-man-page.sgml | sgmlspl ../../../utils/docbook2man/docbook2man-spec.pl &&\
- perl -pi.bak -e 's/ <URL:.*>//; s/\[ /\[/g' privoxy.1 ;\
- perl -pi.bak -e "s/\[ /\[/g;s/á/\\\\['a]/g;s/é/\\\\['e]/g" privoxy.1; \
- perl -pi.bak -e "s/ö/\\\\[:o]/g" privoxy.1; \
- perl -pi.bak -e 's/([ {])-([a-z])/$$1\\-$$2/g' privoxy.1; \
- perl -pi.bak -e 's/ --([a-z])/ \\-\\-$$1/g' privoxy.1; \
- perl -pi.bak -e 's/\\fB--/\\fB\\-\\-/g' privoxy.1; \
- $(DB) ../privoxy-man-page.sgml && $(MV) -f privoxy.1 ../../../privoxy.1
+ $(NSGMLS) ../privoxy-man-page.sgml | sgmlspl ../../../utils/docbook2man/docbook2man-spec.pl &&\
+ perl -pi.bak -e 's/ <URL:.*>//; s/\[ /\[/g' $(MAN_PAGE) ;\
+ perl -pi.bak -e "s/\[ /\[/g;s/á/\\\\['a]/g;s/é/\\\\['e]/g" $(MAN_PAGE); \
+ perl -pi.bak -e "s/ö/\\\\[:o]/g" $(MAN_PAGE); \
+ perl -pi.bak -e 's/([ {])-([a-z])/$$1\\-$$2/g' $(MAN_PAGE); \
+ perl -pi.bak -e 's/ --([a-z])/ \\-\\-$$1/g' $(MAN_PAGE); \
+ perl -pi.bak -e 's/\\fB--/\\fB\\-\\-/g' $(MAN_PAGE); \
+ $(DB) ../privoxy-man-page.sgml && $(MV) -f $(MAN_PAGE) ../../../$(MAN_PAGE)
# For those with man2html ala RH7s.
man2html:
mkdir -p doc/webserver/man-page
-ifneq ($(MAN2HTML),false)
- $(MAN2HTML) privoxy.1 |grep -v "^Content-type" > tmp.html
- $(PERL) -pi.bak -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' tmp.html
- $(PERL) -pi.bak -e 's/(<\/HEAD>)/<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"..\/p_doc.css\"><\/HEAD>/' tmp.html
-# Twice because my version of man2html is pulling in commas and periods in URLs.
- $(PERL) -pi.bak -e 's/(<A.*),(">)/$$1$$2/g' tmp.html
- $(PERL) -pi.bak -e 's,\.">,">,g' tmp.html
- $(PERL) -pi.bak -e "s/\['a\]/\á/g;s/\['e\]/\é/g" tmp.html
-# Get rid of spurious \a from conversion. (How to do this with perl?)
- $(SED) -e 's/\a//g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.*
-else
- $(MAKE) groff2html
-endif
-
+ @if [ $(MAN2HTML) != "false" ]; then \
+ $(MAN2HTML) $(MAN_PAGE) |grep -v "^Content-type" > tmp.html; \
+ $(PERL) -pi.bak -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' tmp.html; \
+ $(PERL) -pi.bak -e 's/(<\/HEAD>)/<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"..\/p_doc.css\"><\/HEAD>/' tmp.html; \
+ $(PERL) -pi.bak -e 's/(<A.*),(">)/$$1$$2/g' tmp.html; \
+ $(PERL) -pi.bak -e 's,\.">,">,g' tmp.html; \
+ $(PERL) -pi.bak -e "s/\['a\]/\á/g;s/\['e\]/\é/g" tmp.html; \
+ $(SED) -e 's/\a//g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.*; \
+ else \
+ $(MAKE) groff2html; \
+ fi;
# Otherwise we get plain groff conversion.
groff2html:
- $(G2H_CMD) ./privoxy.1 | $(SED) -e 's@</head>@<link REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></head>@' > doc/webserver/man-page/privoxy-man-page.html
+ $(G2H_CMD) ./$(MAN_PAGE) | $(SED) -e 's@</head>@<link REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></head>@' > doc/webserver/man-page/privoxy-man-page.html
# readme page and INSTALL file
dok-readme: dok-release
- cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html &&\
- env -u LANG $(WDUMP) tmp.html > ../../README ;\
- $(DB)-notoc -V nochunks install.sgml > tmp.html &&\
- env -u LANG $(WDUMP) tmp.html > ../../INSTALL ;\
+ cd doc/source && $(DB_TXT)-notoc -V nochunks readme.sgml > tmp.html &&\
+ $(W3M_DUMP) tmp.html > ../../README ;\
+ $(DB_TXT)-notoc -V nochunks install.sgml > tmp.html &&\
+ $(W3M_DUMP) tmp.html > ../../INSTALL ;\
$(RM) tmp.*
# index.sgml is used to create both the Home Page, and a local index
# for documentation, etc.
#
# index.html for webserver:
-dok-webserver:
+dok-webserver:
cd doc/source/webserver && $(DB)-notoc -ip-homepage -V nochunks index.sgml > ../../webserver/index.html
$(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
- s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
s/\.\d\. //;\
- s/__copy/©/'\
+ s/__copy/©/;\
+ s@(<SUB)@<p style="text-align: center">\1@; s@(</SUB)@\1></p@' \
doc/webserver/index.html && $(RM) doc/webserver/*.bak
# privoxy-index.html for local documentation:
-dok-index:
+dok-index:
cd doc/source/webserver && $(DB)-notoc -ip-index -V nochunks index.sgml > ../../webserver/privoxy-index.html
$(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
- s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
s/\.\d\. //;\
s/__copy/©/' \
doc/webserver/privoxy-index.html && $(RM) doc/webserver/*.bak
@$(ECHO) Documentation created.
## Make AUTHORS file
-dok-authors:
- cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && env -u LANG $(WDUMP) \
- tmp.html > ../../AUTHORS && $(RM) tmp.html
+dok-authors:
+ cd doc/source && $(DB_TXT) -V nochunks authors.sgml > tmp.html && \
+ $(W3M_DUMP_UTF8) tmp.html > ../../AUTHORS && $(RM) tmp.html
# Set doc entities for VERSION and CODE_STATUS in sgml docs. Toggle content
# exceptions accordingly. This needs to go before any doc building (doh).
s/<!entity +p-status.*>/<!entity p-status "$(CODE_STATUS)">/' \
doc/source/*sgml doc/source/*/*sgml
$(RM) -r doc/source/*bak doc/source/*/*bak
-ifeq ($(CODE_STATUS),stable)
- @$(ECHO) Setting docs to stable $(VERSION)
- @$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "INCLUDE">/;\
- s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "IGNORE">/' \
- doc/source/*sgml doc/source/*/*sgml
- $(RM) -r doc/source/*bak doc/source/*/*bak
-else
- @$(ECHO) Setting docs to not stable $(VERSION)
- @$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "IGNORE">/;\
- s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "INCLUDE">/' \
- doc/source/*sgml doc/source/*/*sgml
- $(RM) -r doc/source/*bak doc/source/*/*bak
-endif
-
-# Create release announcement in text and html, with short and long versions.
-# This is a standalone target, and must be invoked directly.
-# announce: dok-release
-# mkdir -p $(DOC_TMP)
-# cd $(DOC_TMP) && cp -f ../announce.sgml . && $(DB) -iannounce-big announce.sgml &&\
-# mv -f index.html announce.html && $(WDUMP) announce.html > announce.txt
-# cd $(DOC_TMP) && $(DB) announce.sgml &&\
-# mv -f index.html announce-mini.html && $(WDUMP) announce-mini.html > announce-mini.txt &&\
-# mv -f *html *txt ../../..
-# rm -fr $(DOC_TMP)
-
-# The main Privoxy config file, generated from sgml sources.
-# NOTE: This will require some hand editing. The new file is outputted
-# as config.new so that problem sections can be compared to previous
-# version. This is hardcored to w3m for html/text conversion. Also,
-# requires the shell util 'fmt'.
-config-file: dok-release
- cd doc/source && $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
- env -u LANG w3m -dump __tmp.html | fmt -w 70 > ../../config.new && $(RM) -r __tmp.*
- $(PERL) -i.bak utils/prepare-configfile.pl config.new
-
- $(RM) *.bak
+ @if [ $(CODE_STATUS) = "stable" ]; then \
+ $(ECHO) Setting docs to stable $(VERSION); \
+ $(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "INCLUDE">/;\
+ s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "IGNORE">/' \
+ doc/source/*sgml doc/source/*/*sgml; \
+ else \
+ $(ECHO) Setting docs to not stable $(VERSION); \
+ $(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "IGNORE">/; \
+ s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "INCLUDE">/' \
+ doc/source/*sgml doc/source/*/*sgml; \
+ fi;
+ $(RM) -r doc/source/*bak doc/source/*/*bak;
+
+# The main Privoxy config file, generated from sgml sources.
+# NOTE: This will require some hand editing.
+config-file: dok-release generate-config-file
+
+ $(RM) config.bak config.html
@$(ECHO) "****************************************************"
- @$(ECHO) "The output file is config.new."
- @$(ECHO) "Now -- you need to hand edit the results!!!"
+ @$(ECHO) "The config file has been optimistically updated"
+ @$(ECHO) "Now -- you may need to hand edit the results!"
@$(ECHO) "In particular, check the Debug levels, the"
@$(ECHO) "permit-access, forward & socks examples and the"
@$(ECHO) "various user-manual examples, which all"
- @$(ECHO) "probably got hammered."
+ @$(ECHO) "might have gotten hammered."
@$(ECHO) "****************************************************"
-# config file, alternate version using lynx (perl stuff unfinished). Lynx
-# does not do so good a job.
-config-file-alt:
- cd doc/source && $(ECHO) -e ".h2 JUSTIFY\\nJUSTIFY:FALSE" > __tmp.lynx_cfg &&\
- $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
- lynx -cfg=__tmp.lynx_cfg -width=78 -dump __tmp.html > ../../config.new && $(RM) -r __tmp.*
- $(PERL) -pi -e 's/^( )//;\
- s/:$\/:\n/' config.new
+generate-config-file:
+ cd doc/source && $(DB_TXT)-notoc -iconfig-file -V nochunks config.sgml > ../../config.html
+ $(W3M_DUMP) -cols 67 config.html > config
+ $(PERL) -i.bak utils/prepare-configfile.pl config
#############################################################################
#
# Webserver
#
-# moves dokumentation to webserver
+# moves documentation to webserver
#
#############################################################################
-webserver: tidy
+sf-shell:
+ @sf_name=$(SOURCE_FORGE_NAME); \
+ [ -n "$${sf_name}" ] || read -p "Enter SourceForge username: " sf_name || exit 1; \
+ echo "Opening shell for $${sf_name} ..."; \
+ ssh -t $${sf_name},ijbswa@shell.sourceforge.net create
+
+webserver: clean-editor-files
@$(ECHO) -------------------------------------------------------
@$(ECHO) You will need to "create" a SF shell first:
@$(ECHO) ssh -t SF-USER-ID,ijbswa@shell.sourceforge.net create
@$(ECHO) Please make sure your documentation files are up to date.
- @$(ECHO) Note that this command updates the home page and copys
+ @$(ECHO) Note that this command updates the home page and copys
@$(ECHO) all stuff to the webserver, it will not remove obsolete documents.
@$(ECHO) Note that a botched upload can result in the documentation
@$(ECHO) on the website becoming unreachable! Also the CSS files
@$(ECHO) -------------------------------------------------------
@$(ECHO) Replacing the user-manual symlink
- @$(SSH) shell.sourceforge.net "cd /home/groups/i/ij/ijbswa/htdocs && rm user-manual \
+ @$(SSH) shell.sourceforge.net "cd $(WWW_ROOT)/htdocs && rm user-manual \
&& mkdir -p $(VERSION)/user-manual && ln -s $(VERSION)/user-manual user-manual"
@$(ECHO) Uploading html
@cd doc/webserver; \
upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
- $(TAR) cf - $$upload | $(SSH) shell.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
+ $(TAR) cf - $$upload | $(SSH) shell.sourceforge.net 'cd $(WWW_ROOT)/htdocs/; tar xvm 2>&1 | grep -v timestamp'
- @$(ECHO) Fixing permissions
- @$(SSH) shell.sourceforge.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true'
- @$(SSH) shell.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
+web-actions:
+ @$(ECHO) Updating the actions on the webserver ...
+ @$(RSYNC) doc/webserver/actions/*.php shell.sourceforge.net:$(WWW_ROOT)/htdocs/actions
-web-actions: tidy
- @$(ECHO) Uploading
- @cd doc/webserver/actions; \
- upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
- $(TAR) cf - $$upload | $(SSH) ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm'
+web-homepage:
+ @$(ECHO) "Updating the home page (index.html) only (be careful in case of version changes) ..."
+ @$(RSYNC) doc/webserver/index.html shell.sourceforge.net:$(WWW_ROOT)/htdocs/
- @$(ECHO) Fixing permissions
- @$(SSH) ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
- @$(SSH) ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
+web-faq:
+ @$(ECHO) Updating the FAQ on the webserver ...
+ @$(RSYNC) doc/webserver/faq/*.html shell.sourceforge.net:$(WWW_ROOT)/htdocs/faq
-##
-dok-put:
- tar --exclude ".cvsignore" --exclude "CVS" --exclude "source" --exclude ".htaccess" \
- --exclude "obsolete" --exclude "actions" --exclude "*.zip" --exclude "robots.txt"\
- doc/* INSTALL LICENSE AUTHORS README \
- -czf $(DOC_FILE) ;\
- $(ECHO) "Uploading doc package ..." ;\
- scp $(DOC_FILE) ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/docs/
- @$(SSH) ijbswa.sourceforge.net 'chmod 775 /home/groups/i/ij/ijbswa/htdocs/docs/*gz 2>/dev/null; true'
- $(RM) $(DOC_FILE)
+web-sponsors:
+ @$(ECHO) "Updating the sponsor page (index.html) only ..."
+ @$(RSYNC) doc/webserver/sponsors/index.html shell.sourceforge.net:$(WWW_ROOT)/htdocs/sponsors/
-dok-get:
- cd /tmp ;\
- $(WGET) http://www.privoxy.org/docs/$(DOC_FILE) ;\
- $(TAR) -zxvf $(DOC_FILE)
+web-user-manual:
+ @$(ECHO) Updating the user manual on the webserver (do not use in case of version changes) ...
+ @$(RSYNC) doc/webserver/user-manual/*.html shell.sourceforge.net:$(WWW_ROOT)/htdocs/user-manual/
+
+#############################################################################
+#
+# Try to clean up the generated HTML files.
+#
+# The files are such a mess that some of them require two tidy runs in a
+# row as the first one aborts prematurely. The vanilla tidy output renders
+# poorly because it contains a bit too much whitespace, so we additionally
+# run the files through perl to fix this again.
+#
+#############################################################################
+dok-tidy:
+ for html_file in `find doc/webserver -name "*.html"`; do \
+ $(ECHO) "------ begin processing $$html_file" >&2 ; \
+ $(TIDY) $$html_file || $(TIDY) $$html_file; \
+ $(PERL) -i'' -e 's@^\s*<br>\s*$$@@; s@ +$$@@;' -n -p $$html_file; \
+ done
#############################################################################
# Source file dependencies
#############################################################################
-actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h ssplit.h
+actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h filters.h jcc.h list.h loaders.h miscutil.h actionlist.h ssplit.h
cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h jbsockets.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actionlist.h actions.h errlog.h miscutil.h
cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h urlmatch.h
deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
encode.@OBJEXT@: encode.c encode.h config.h
errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h
-filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h urlmatch.h @WIN_ONLY@win32.h
+filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h urlmatch.h @WIN_ONLY@win32.h
gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h w32svrapi.h cgi.h
parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
ssplit.@OBJEXT@: ssplit.c ssplit.h config.h miscutil.h
urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h
+client-tags.@OBJEXT@: client-tags.c client-tags.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h
+fuzz.@OBJEXT@: fuzz.c config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h
# GNU regex
gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h
# PCRS
-pcrs.@OBJEXT@: pcrs.c pcrs.h config.h @STATIC_PCRE_ONLY@pcre/pcre.h
+pcrs.@OBJEXT@: pcrs.c pcrs.h config.h @STATIC_PCRE_ONLY@pcre/pcre.h
# PCRE
pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h
pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h
-pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c
+pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c
pcre/pcreposix.@OBJEXT@: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h
pcre/study.@OBJEXT@: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h
win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h w32svrapi.h
w32.res: w32.rc w32res.h icons/radar-01.ico icons/radar-02.ico icons/radar-03.ico icons/radar-04.ico icons/radar-05.ico icons/radar-06.ico icons/radar-07.ico icons/radar-08.ico icons/idle.ico icons/privoxy.ico config.h
- windres -D__MINGW32__=0.2 -O coff -i $< -o $@
-
-# AmigaOS
-@AMIGAOS_ONLY@OBJS += amiga.o
-@AMIGAOS_ONLY@ifeq ($(shell $(CC) -dumpmachine), m68k-amigaos)
-@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
-@AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
-@AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
-@AMIGAOS_ONLY@else
-@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -Wextra -D__USE_INLINE__ -D__NO_INTUITION_RJ_MACROS
-@AMIGAOS_ONLY@endif
-@AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h
-
+ windres -F pe-i386 -D__MINGW32__=0.2 -O coff -i $< -o $@
$(PROGRAM): $(OBJS) $(W32_FILES)
$(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
clean:
$(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) default.action \
- `find . -name TAGS -o -name tags | $(GREP) -v .git` config.base config.tmp
+ config.base config.tmp \
+ `find . \( -name TAGS -o -name tags \) -a -not -path "./.git/*"` \
+ `find . -name "*.orig" -a -not -name rc.privoxy.orig -a -not -path "./.git/*"`
-tidy:
+clean-editor-files:
$(RM) `find . -name "*~"`
$(RM) `find . -name "#*#"` # Emacs backup files
$(RM) `find . -name ".\#*"`
-clobber: tidy
+clobber: clean-editor-files
$(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \
privoxy.log core *.tar.gz *.tar privoxy-cl.spec doc/source/ldp.dsl config.new
$(RM) -r autom4te.cache
#
-# FIXME: What is all this?
+# FIXME: What is all this?
#
- $(RM) cscope.* *.pdb *.lib *.exp
+ $(RM) cscope.* *.pdb *.lib *.exp
distclean: clobber
install-strip:
$(MAKE) install STRIP=-s
-# FIXME: Test USER and GROUP on Slack to make sure this works as
+# FIXME: Test USER and GROUP on Slack to make sure this works as
# intended.
#
-# FIXME: id handling needs help, probably via configure, since 'id -u' is not
-# universally reliable (eg Solaris). Group handling could be better.
+# FIXME: id handling needs help, probably via configure, since 'id -u' is not
+# universally reliable (eg Solaris). Group handling could be better.
# Perhaps the whole user/group validation should be done here, and simplified.
PROGRAM_V = Privoxy $(VERSION) $(CODE_STATUS)
install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T
@if [ -n "$(USER)" ]; then \
$(ID) $(USER) >/dev/null || exit 1;\
fi
- @# Test for valid group. FIXME. USER does not have to belong to GROUP
+ @# Test for valid group. FIXME. USER does not have to belong to GROUP
@# for file ownership purposes.
# if [ -n "$(GROUP_T)" ] && [ -n "$(USER)" ] && ! $(GROUPS) $(USER) | $(GREP) "\<$(GROUP_T)\>" >/dev/null; then \
# $(ECHO) Group $(GROUP_T) for User $(USER) is invalid && exit 1 ;\
$(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC/user-manual;\
fi
@# Not all platforms support gzipped man pages.
- @$(ECHO) Installing man page to $(DESTDIR)$(MAN_DEST)/privoxy.1
- -$(INSTALL) $(INSTALL_T) privoxy.1 $(DESTDIR)$(MAN_DEST)/privoxy.1
+ @$(ECHO) Installing man page to $(DESTDIR)$(MAN_DEST)/$(MAN_PAGE)
+ -$(INSTALL) $(INSTALL_T) $(MAN_PAGE) $(DESTDIR)$(MAN_DEST)/$(MAN_PAGE)
@# Change the config file default directories according to the configured ones
@$(ECHO) Rewriting config for this installation
$(SED) 's+^#\?user-manual .*+user-manual $(prefix)/doc/privoxy/user-manual/+' config.tmp >config.updated ;\
fi;\
$(MV) config config.base
- $(MV) config.updated config
+ $(MV) config.updated config
- @# Install the config support files. Test for root install, and abort
- @# if there is no privoxy user, and no other user was enabled during
+ @# Install the config support files. Test for root install, and abort
+ @# if there is no privoxy user, and no other user was enabled during
@# configure. Later, install init script if appropriate.
@$(ECHO) Installing templates to $(DESTDIR)$(CONF_DEST)/templates
@for i in `find templates -type f`; do \
@# man page and docs
@$(ECHO) Removing $(PROGRAM) docs
- -$(RM) $(DESTDIR)$(MAN_DEST)/privoxy.1*
+ -$(RM) $(DESTDIR)$(MAN_DEST)/$(MAN_PAGE)*
-$(RM) -r $(DESTDIR)$(DOC_DEST) || $(RM) -r $(DESTDIR)$(prefix)/doc/privoxy
@# Log and pidfile
projects / privoxy.git / blobdiff