# Note: Makefile is built automatically from Makefile.in
#
-# $Id: GNUmakefile.in,v 1.118 2002/09/11 08:22:37 oes Exp $
+# $Id: GNUmakefile.in,v 1.127 2002/10/18 00:58:07 hal9 Exp $
#
# Written by and Copyright (C) 2001 the SourceForge
# Privoxy team. http://www.privoxy.org/
# changes this to /var for storing the logs and pidfile
# used in source dir only, the install goes to $share_dest/doc/privoxy
-DOK_WEB_USEM = doc/webserver/user-manual
+DOK_WEB = doc/webserver/
#############################################################################
# Build tools
INSTALL_T = -m 0644
INSTALL_D = -m 0755 -d
# install options for superuser install
-INSTALL_S = -g @GROUP@ -o @USER@
-ID = id -u
+#INSTALL_S = -g @GROUP@ -o @USER@
+# id -u is not universal. FIXME: need to set from configure. Breaks on
+# Solaris.
+#ID = id -u
LD = @CC@
RM = rm -f
RMDIR = rmdir
MKDIR = ./mkinstalldirs
STRIP_PROG = strip
-SED = sed
+SED = sed
GREP = grep
CAT = cat
RPM = rpm
-MV = mv
+MV = mv
TAR = tar
LN = ln
TOUCH = touch
#User Group paras
USER = @USER@
-GROUP = @GROUP@
+GROUP = @GROUP@
# Program to do LF->CRLF
#
#############################################################################
# We include these files in our distributions
#############################################################################
+CONFIGS = config trust default.action standard.action user.action default.filter
# take care that no CVS .cvsignore or other crappy files
# are included here
# and escape every '#' in the find. doh.
-CONFIG_FILES = config trust \
- default.action \
- standard.action user.action \
- default.filter \
+CONFIG_FILES = $(CONFIGS) \
`find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
-DOC_FILES = AUTHORS LICENSE README ChangeLog \
+DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \
`find doc/text/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` \
`find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \
`find doc/webserver/ -name "*.css"` \
suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
install conectiva-spec conectiva-dist conectiva-upload debian-dist \
debian-upload ensure-wdump ensure-jadebin ensure-dkprefix CONF_DEST LOG_DEST \
-PID_DEST check_doc install-strip
+PID_DEST check_doc install-strip uninstall GROUP_T
#############################################################################
$(CC) -o $(DIR_PRIVOXY_SRC_PCRE)/dftables@EXEEXT@ $(CFLAGS) $(DIR_PRIVOXY_SRC_PCRE)/dftables.c
# Win32
-$(DIR_PRIVOXY_OBJ)/w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
-$(DIR_PRIVOXY_OBJ)/w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
-$(DIR_PRIVOXY_OBJ)/win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h pcrs.h project.h w32log.h win32.h
+$(DIR_PRIVOXY_OBJ)/w32log.@OBJEXT@: $(DIR_PRIVOXY_SRC)/config.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/project.h $(DIR_PRIVOXY_SRC)/w32log.c $(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/w32taskbar.h $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h
+$(DIR_PRIVOXY_OBJ)/win32.@OBJEXT@: $(DIR_PRIVOXY_SRC)/config.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/project.h $(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/win32.c $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h
+$(DIR_PRIVOXY_OBJ)/w32taskbar.@OBJEXT@: $(DIR_PRIVOXY_SRC)/config.h $(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/w32taskbar.c $(DIR_PRIVOXY_SRC)/w32taskbar.h
$(DIR_PRIVOXY_OBJ)/w32res.res: $(DIR_PRIVOXY_SRC)/w32res.rc \
$(DIR_PRIVOXY_SRC)/w32res.h \
tags: $(SRCS) $(HDRS)
etags $(SRCS) $(HDRS)
-CONF_DEST:=$(shell if [ "$(prefix)" == "/usr/local" ] && [ "$(CONF_BASE)" == "$(prefix)/etc" ];then \
+CONF_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(CONF_BASE)" = "$(prefix)/etc" ];then \
$(ECHO) "$(CONF_BASE)/privoxy";\
else\
$(ECHO) "$(CONF_BASE)";\
fi)
-LOG_DEST:=$(shell if [ "$(prefix)" == "/usr/local" ] && [ "$(LOGS_DEST)" == "$(prefix)/var/log/privoxy" ];then \
+LOG_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(LOGS_DEST)" = "$(prefix)/var/log/privoxy" ];then \
$(ECHO) "/var/log/privoxy" ;\
else\
$(ECHO) "$(LOGS_DEST)";\
fi)
-PID_DEST:=$(shell if [ "$(prefix)" == "/usr/local" ] && [ "$(PIDS_DEST)" == "$(prefix)/var/run" ];then \
+PID_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(PIDS_DEST)" = "$(prefix)/var/run" ];then \
$(ECHO) "/var/run" ;\
else\
$(ECHO) "$(PIDS_DEST)";\
fi)
-check_doc:=$(shell if [ ! -d "$(SHARE_DEST)/doc" ] && [ "$(prefix)" == "/usr/local" ] && [ -d "$(prefix)/doc" ];then \
+check_doc:=$(shell if [ ! -d "$(SHARE_DEST)/doc" ] && [ "$(prefix)" = "/usr/local" ] && [ -d "$(prefix)/doc" ];then \
$(ECHO) "1";\
else\
$(ECHO) "0";\
fi)
-install-strip:
- $(MAKE) INSTALL_P='$(INSTALL_P) -s' install
-
-install: CONF_DEST LOG_DEST PID_DEST check_doc all
- #
- # FIXME: test this in all systems and with several options and report any bugs
- #
-
- $(MKDIR) $(SBIN_DEST) $(prefix) $(CONF_DEST) $(SHARE_DEST) $(MAN_DEST) $(LOG_DEST) $(PID_DEST)
-
- # Install the executable binary
- $(INSTALL) $(INSTALL_P) $(PROGRAM) $(SBIN_DEST)
+# If USER is specified but no GROUP, assume there is a GROUP of same name.
+GROUP_T:=$(shell if [ x$(GROUP) = x ] && [ x$(USER) != x ];then \
+ $(ECHO) "$(USER)" ;\
+ else\
+ $(ECHO) "$(GROUP)";\
+ fi)
- $(INSTALL) $(INSTALL_D) $(CONF_DEST)
- $(INSTALL) $(INSTALL_D) $(CONF_DEST)/templates
+install-strip:
+ $(MAKE) install STRIP=-s
+# FIXME: redhat init script has wrong paths for /usr/local/ install.
+#
+# FIXME: Check USER and GROUP on Slack to make user this works as
+# intended.
+#
+# FIXME: id handling needs help, probably via configure, since 'id -u' is not
+# universally reliable (eg Solaris). Group handling is weak. If group is null,
+# we blindly assume there is a group that matches $(USER). configure only
+# tests for the first group outputted from groups command. Perhaps the whole
+# user/group validation should be done here. In fact, it should probably be
+# tested for and set first thing, ie for a root install.
+install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T
+ # Quick test for valid USER.
+ if [ -n "$(USER)" ]; then \
+ id $(USER) >/dev/null || exit 1;\
+ fi
+ $(ECHO) "Creating directories, and preparing Privoxy installation"
+ $(CHMOD) 0755 $(MKDIR)
+ $(MKDIR) $(SBIN_DEST) $(prefix) $(CONF_DEST) $(CONF_DEST)/templates $(SHARE_DEST) \
+ $(LOG_DEST) $(PID_DEST)
+ # Install the executable binary, strip if invoked as install-strip
+ test -n "$(STRIP)" &&\
+ $(ECHO) Installing $(PROGRAM) stripped executable to $(SBIN_DEST) ||\
+ $(ECHO) Installing $(PROGRAM) executable to $(SBIN_DEST)
+ $(INSTALL) $(INSTALL_P) $(STRIP) $(PROGRAM) $(SBIN_DEST)
+
# Install the DOCS and man page
- if [ $(check_doc) == 0 ]; then \
+ -if [ $(check_doc) = 0 ]; then \
DOC=$(DOC_DEST) ;\
else \
DOC=$(prefix)/doc/privoxy ;\
fi;\
- $(INSTALL) $(INSTALL_D) $$DOC ;\
- $(INSTALL) $(INSTALL_D) $$DOC/user-manual ;\
- if [ -d "$(DOK_WEB_USEM)" ]; then \
- $(INSTALL) $(INSTALL_T) $(DOK_WEB_USEM)/[^C]* $$DOC/user-manual;\
- $(INSTALL) $(INSTALL_T) $(DOK_WEB_USEM)/../p_doc.css $$DOC;\
+ $(MKDIR) $$DOC $$DOC/user-manual $$DOC/faq $$DOC/developer-manual \
+ $$DOC/man-page $$DOC/images $(MAN_DEST) ;\
+ if [ -d "$(DOK_WEB)" ]; then \
+ $(ECHO) Installing FAQ, Manual, and other docs to $$DOC;\
+ for i in user-manual developer-manual faq; do \
+ for ii in $(DOK_WEB)/$$i/*html; do \
+ $(INSTALL) $(INSTALL_T) $$ii $$DOC/$$i;\
+ done ;\
+ done ;\
+ for i in $(DOK_WEB)/images/*jpg; do \
+ $(INSTALL) $(INSTALL_T) $$i $$DOC/images;\
+ done ;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/man-page/*html $$DOC/man-page;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/privoxy-index.html $$DOC/index.html;\
+ $(INSTALL) $(INSTALL_T) AUTHORS $$DOC;\
+ $(INSTALL) $(INSTALL_T) LICENSE $$DOC;\
+ $(INSTALL) $(INSTALL_T) README $$DOC;\
+ $(INSTALL) $(INSTALL_T) ChangeLog $$DOC;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $$DOC;\
fi
- -$(GZIP_PROG) -c privoxy.1 > $(MAN_DEST)/privoxy.1.gz
+ $(ECHO) Installing man page to $(MAN_DEST)/privoxy.1
+ -$(INSTALL) $(INSTALL_T) privoxy.1 $(MAN_DEST)/privoxy.1
- # Change the Config file default directories acording to the configured ones
- if [ -e config.base ] ; then \
+ # Change the config file default directories according to the configured ones
+ $(ECHO) Rewriting config for this installation
+ if [ -f config.base ] ; then \
$(CAT) config >config~ ;\
$(MV) config.base config ;\
fi
$(MV) config config.base
$(MV) config.updated config
- # Install the config support files
- $(INSTALL) $(INSTALL_T) templates/[^C]* $(CONF_DEST)/templates
- if [ `$(ID)` == 0 ] ;then\
- $(ECHO) -e "\n Superuser install, installing config files as $(USER),$(GROUP)" ;\
- INSTALL_CONF="$(INSTALL_T) -b $(INSTALL_S)" ;\
+ # Install the config support files. Test for root install, and abort
+ # if there is no privoxy user, and no other user was enabled during
+ # configure. Later, install init script if appropriate.
+ $(ECHO) Installing templates to $(CONF_DEST)/templates
+ for i in `find templates -type f`; do \
+ $(INSTALL) $(INSTALL_T) $$i $(CONF_DEST)/templates ;\
+ done
+ if [ "`id |sed 's/(.*//' |sed 's/.*=//'`" = "0" ] ;then\
+ if [ x$(USER) = x ]; then \
+ if [ "`id privoxy`" ]; then \
+ $(ECHO) "Setting user and group to privoxy";\
+ INSTALL_CONF="$(INSTALL_T) -g privoxy -o privoxy" ;\
+ USER=privoxy ;\
+ GROUP_T=privoxy ;\
+ else \
+ $(ECHO) "******************************************************************" ;\
+ $(ECHO) " WARNING! WARNING! installing config files as root!" ;\
+ $(ECHO) " It is strongly recommended to run $(PROGRAM) as non-root user," ;\
+ $(ECHO) " and to install the config files as that user!" ;\
+ $(ECHO) " Please read INSTALL, and create a privoxy user!" ;\
+ $(ECHO) "*******************************************************************" ;\
+ exit 1 ;\
+ fi ;\
+ else \
+ $(ECHO) "Superuser install, installing config files as $(USER):$(GROUP_T)" ;\
+ INSTALL_CONF="$(INSTALL_T) -o $(USER) -g $(GROUP_T)" ;\
+ fi ;\
else \
- if [ ! `$(ID) $(USER)` == `$(ID)` ] ;then \
- $(ECHO) -e "\n ** WARNING ** current install user different from configured user!! edit may fail.\n" ;\
+ if [ ! "`id $(USER)`" = "`id`" ] ;then \
+ $(ECHO) "** WARNING ** current install user different from configured user!!" ;\
+ $(ECHO) "Edit may fail." ;\
fi ;\
- INSTALL_CONF="$(INSTALL_T) -b " ;\
+ INSTALL_CONF="$(INSTALL_T)" ;\
fi ;\
- $(INSTALL) $$INSTALL_CONF config default.action default.filter trust standard.action $(CONF_DEST) ;\
- if [ ! -s "$(CONF_DEST)\user.action" ] ; then \
- $(INSTALL) $$INSTALL_CONF user.action $(CONF_DEST) ;\
+ $(ECHO) Installing configuration files to $(CONF_DEST);\
+ for i in $(CONFIGS); do \
+ if [ -s "$(CONF_DEST)/$$i" ] ; then \
+ $(ECHO) Installing $$i as $$i.new ;\
+ $(INSTALL) $$i $(CONF_DEST)/$$i.new || exit 1;\
+ NEW=1;\
+ else \
+ if test "$$i" = "config" || test "$$i" = "default.filter"; then \
+ $(INSTALL) $$i $(CONF_DEST) || exit 1;\
+ $(CHMOD) 0640 $(CONF_DEST)/$$i ;\
+ else \
+ $(INSTALL) $$INSTALL_CONF $$i $(CONF_DEST) || exit 1;\
+ fi;\
+ fi ;\
+ done ;\
+ if [ -n "$$NEW" ]; then \
+ $(CHMOD) 0640 $(CONF_DEST)/*.new || exit 1 ;\
+ $(ECHO) "Warning: Older config files are preserved. Check new versions for changes!" ;\
fi ;\
-
- # setup the logfiles
- # mode 0640 in the logs for privacy reasons
- $(TOUCH) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile
- -$(CHOWN) $(USER),$(GROUP) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || \
- $(ECHO) -e "\n ** WARNING ** current install user different from configured user!! Loging may fail\n"
- -$(CHMOD) 0640 $(LOG_DEST)/logfile $(LOG_DEST)/jarfile
-
- # Install the init scripts
- if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
- $(SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \
- $(SED) 's+%SBIN_DEST%+$(SBIN_DEST)+' | \
- $(SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \
- $(SED) 's+%USER%+$(USER)+' | \
- $(SED) 's+%GROUP%+$(GROUP)+' >slackware/rc.privoxy ;\
- $(INSTALL) $(INSTALL_P) slackware/rc.privoxy /etc/rc.d/ ;\
- $(ECHO) -e "\n Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\
- elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
- $(INSTALL) $(INSTALL_P) privoxy-generic.init /etc/init.d/privoxy ;\
+ ! test -f $(LOG_DEST)/logfile && $(ECHO) Creating logfiles in $(LOG_DEST) || \
+ $(ECHO) Checking logfiles in $(LOG_DEST) ;\
+ $(TOUCH) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || exit 1 ;\
+ if [ x$$USER != x ]; then \
+ $(CHOWN) $$USER:$$GROUP_T $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || \
+ $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
+ fi ;\
+ $(CHMOD) 0640 $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || exit 1 ;\
+ if [ "$(prefix)" = "/usr/local" ]; then \
+ if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
+ $(SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \
+ $(SED) 's+%SBIN_DEST%+$(SBIN_DEST)+' | \
+ $(SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \
+ $(SED) 's+%USER%+$(USER)+' | \
+ $(SED) 's+%GROUP%+$(GROUP_T)+' >slackware/rc.privoxy ;\
+ $(INSTALL) $(INSTALL_P) slackware/rc.privoxy /etc/rc.d/ ;\
+ $(ECHO) "Installing for Slackware." ;\
+ $(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\
+ elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
+ $(ECHO) "Installing init script to /etc/rc.d/init.d/privoxy" ;\
+ $(INSTALL) $(INSTALL_P) privoxy.init /etc/rc.d/init.d/privoxy ;\
+ $(MKDIR) /etc/logrotate.d/ ;\
+ $(ECHO) "Installing logrotate script to /etc/logrotate.d/" ;\
+ $(INSTALL) $(INSTALL_P) privoxy.logrotate /etc/logrotate.d/privoxy ;\
+ elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
+ $(ECHO) "Installing generic init script to /etc/init.d/privoxy" ;\
+ $(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\
+ $(INSTALL) $(INSTALL_P) privoxy-generic.init /etc/init.d/privoxy ;\
+ fi ;\
else \
- $(ECHO) -e "\n No init script installed, install it manually" ;\
+ $(ECHO) "No init script installed, install it manually if needed" ;\
fi
- # FIXME $(ECHO) privoxy.logrotate privoxy.monthly privoxy.weekly
+ # mmmmm, good.
+ @$(ECHO) "Privoxy installation succeeded!"
+ @$(ECHO) "The Privoxy configuration files have been installed in $(CONF_DEST)"
+# rmdir is used as a precaution since it will not remove non-empty
+# directories.
uninstall: CONF_DEST LOG_DEST PID_DEST check_doc
- #
- # FIXME: test this in all systems and with several options and report any bugs
- #
-
+ $(ECHO) Starting Privoxy uninstallation
# KILL privoxy if running
- -@ $(KILL) `$(CAT) $(PID_DEST)/privoxy.pid ` >/dev/nul 2>/dev/null
- -@ $(KILL) `$(CAT) /var/run/privoxy.pid ` >/dev/nul 2>/dev/null
+ -@ test -f $(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
+ $(KILL) `$(CAT) $(PID_DEST)/privoxy.pid`
+ -@ test -f /var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
+ $(KILL) `$(CAT) /var/run/privoxy.pid `
# Program binary
+ $(ECHO) Removing $(PROGRAM) binary
$(RM) $(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~
- # config files and dir and maybe old install backups
- $(RM) $(CONF_DEST)/config $(CONF_DEST)/default.action $(CONF_DEST)/default.filter \
- $(CONF_DEST)/trust $(CONF_DEST)/standard.action $(CONF_DEST)/user.action \
- $(CONF_DEST)/config~ $(CONF_DEST)/default.action~ $(CONF_DEST)/default.filter~ \
- $(CONF_DEST)/trust~ $(CONF_DEST)/standard.action~ $(CONF_DEST)/user.action~
+ # config files and dir, and maybe old install backups
+ $(ECHO) Removing $(PROGRAM) config files
+ for i in $(CONFIGS); do \
+ $(RM) $(CONF_DEST)/$$i $(CONF_DEST)/$$i~ $(CONF_DEST)/$$i.new ;\
+ done
$(RM) -r $(CONF_DEST)/templates
- -$(RMDIR) $(CONF_DEST) || $(ECHO) -e " $(CONF_DEST) is not empty, couldnt remove it\n" ;\
# man page and docs
- -$(RM) $(MAN_DEST)/privoxy.1.gz
+ $(ECHO) Removing $(PROGRAM) docs
+ -$(RM) $(MAN_DEST)/privoxy.1*
-$(RM) -r $(DOC_DEST) || $(RM) -r $(prefix)/doc/privoxy
# Log and jarfile and pidfile
- -$(RM) $(LOG_DEST)/logfile || $(RM) /var/log/privoxy/logfile
- -$(RM) $(LOG_DEST)/jarfile || $(RM) /var/log/privoxy/jarfile
- -$(RM) $(PID_DEST)/privoxy.pid || $(RM) /var/run/privoxy.pid
-
- # final clean up of unused directories
- if [ ! "$(prefix)" == "/usr/local" ] ;then \
- $(RMDIR) $(MAN_DEST) || $(ECHO) -e " $(MAN_DEST) is not empty, couldnt remove it\n" ;\
- $(RMDIR) $(MAN_DIR) || $(ECHO) -e " $(MAN_DIR) is not empty, couldnt remove it\n" ;\
- $(RMDIR) $(SHARE_DEST)/doc || $(ECHO) -e " $(SHARE_DEST)/doc is not empty, couldnt remove it\n" ;\
- $(RMDIR) $(SHARE_DEST) || $(ECHO) -e " $(SHARE_DEST) is not empty, couldnt remove it\n" ;\
- $(RMDIR) $(CONF_BASE) || $(ECHO) -e " $(CONF_BASE) is not empty, couldnt remove it\n" ;\
- $(RMDIR) $(SBIN_DEST) || $(ECHO) -e " $(SBIN_DEST) is not empty, couldnt remove it\n" ;\
- $(RMDIR) $(LOG_DEST) || $(ECHO) -e " $(LOG_DEST) is not empty, couldnt remove it\n" ;\
- $(RMDIR) $(prefix) || $(ECHO) -e " $(prefix) is not empty, couldnt remove it\n" ;\
+ $(ECHO) Removing $(PROGRAM) logs
+ -$(RM) $(LOG_DEST)/logfile $(PID_DEST)/privoxy.pid $(LOG_DEST)/jarfile
+
+ # Final clean up of unused directories. Special handling of CONF and LOG
+ # destinations.
+ $(ECHO) Removing $(PROGRAM) directories
+ for i in $(LOG_DEST) $(CONF_DEST); do \
+ if test -d $$i; then \
+ $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
+ fi;\
+ done
+ if [ ! "$(prefix)" = "/usr/local" ] ;then \
+ for i in $(MAN_DEST) $(MAN_DIR) $(SHARE_DEST)/doc $(SHARE_DEST) $(SBIN_DEST); do \
+ if test -d $$i; then \
+ $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
+ fi;\
+ done;\
+ if test $(LOG_DEST) != /var/log/privoxy && test -d $(prefix)/var/log; then \
+ $(RMDIR) $(prefix)/var/log || $(ECHO) "$(prefix)/var/log is not empty, not removed";\
+ fi ;\
+ if test $(PID_DEST) != /var/run && test -d $(prefix)/var/run; then \
+ $(RMDIR) $(prefix)/var/run || $(ECHO) "$(prefix)/var/run is not empty, not removed";\
+ fi ;\
+ if test $(prefix)/var != /var && test -d $(prefix)/var; then \
+ $(RMDIR) $(prefix)/var || $(ECHO) "$(prefix)/var is not empty, not removed" ;\
+ fi ;\
+ if test $(prefix) != / && test $(prefix) != /usr && test -d $(prefix); then \
+ $(ECHO) Removing installation directory $(prefix) ;\
+ $(RMDIR) $(prefix) || $(ECHO) "$(prefix) is not empty, not removed" ;\
+ fi;\
fi
- # init scripts
- if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
- $(RM) /etc/rc.d/rc.privoxy ;\
- elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
- $(RM) /etc/init.d/privoxy ;\
- else \
- $(ECHO) -e "\n Unable to remove privoxy init script... not installed or permition denied" ;\
+
+ # init scripts and logrotate
+ if [ "$(prefix)" = "/usr/local" ]; then \
+ $(ECHO) Removing $(PROGRAM) init script ;\
+ if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
+ $(RM) /etc/rc.d/rc.privoxy ;\
+ elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
+ $(RM) /etc/rc.d/init.d/privoxy /etc/logrotate.d/privoxy;\
+ elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
+ $(RM) /etc/init.d/privoxy ;\
+ else \
+ $(ECHO) "Unable to remove privoxy init script, not installed or permission denied" ;\
+ fi ;\
fi
+ $(ECHO) Privoxy uninstalled, bye
coffee:
@perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,101,0,109,143,205,13,192,32,8,133,\
## end:
# $Log: GNUmakefile.in,v $
+# Revision 1.127 2002/10/18 00:58:07 hal9
+# More install/uninstall/install-strip updates:
+# - Don't install gzipped man page (Solaris again).
+# - Don't overwrite existing config files, and install new versions as *.new.
+# Fix permissions/ownership here too.
+# - Better testing before removing directories.
+# - Some better messages during install, ie 'Preserving configs', etc.
+# - Better handling of install-strip to fix previous problem of trying to strip
+# init scripts.
+# - Crude test for valid USER in case is set on command line.
+# - Force immediate exit on some errors (eg invalid group).
+#
+# Revision 1.126 2002/10/16 05:38:00 hal9
+# More make install/uninstall updates:
+# -Make compatible with install-sh with does not support -b flag, and can only
+# handle one file at a time (sigh).
+# -Manually save existing config files, if they exist.
+# -Fix install-strip so does not try to strip init scripts.
+#
+# Revision 1.125 2002/10/15 05:53:34 hal9
+# A few more cleanups:
+# -use mkinstalldirs consistently.
+# -Install init script and logrotate only is prefix=/usr/local (installed to
+# system dir /etc instead of /usr/local...)
+# -Test for directory existence before removing to avoid misleading error
+# messages.
+#
+# Revision 1.124 2002/10/13 19:58:09 hal9
+# Hopefully, this is final updates for install and uninstall targets.
+# - Fix typo in chown syntax
+# - chmod on mkinstalldirs to make it executable (is there a better way?).
+# - Cleanup comments, and revert most of previous output cleanup changes.
+# - Include all HTML docs, since there are cross links between these.
+# - Improved group handling (still some potential problems, see FIXME).
+# - Update PHONY targets.
+# - Uninstall was not removing CONF and LOG destinations in some situations.
+# - Various other minor cleanups.
+#
+# Revision 1.123 2002/10/12 06:05:41 hal9
+# WIP: This is mostly to fix various problems encountered on SF CF Solaris
+# servers for the install target only. This did not handle /[^C]*, test -e, not
+# quoting within tests (ie [ `id $(USER)` = `id` ] needs quoting) in some
+# situations, and does not support id -u (with the id in $PATH, but there is
+# another...). Also, cleaned up output. Needs testing. I am unable to test the
+# root install stuff either. It installs now at least (not tested further).
+# A few other nits.
+#
+# Revision 1.122 2002/10/11 06:03:08 hal9
+# Really install FAQ this time, and not u-m in two locations. Include images
+# for u-m.
+#
+# Revision 1.120 2002/10/10 20:39:27 dessent
+#
+#
+# Fixes for Win32 GUI build (added "$(DIR_PRIVOXY_SRC)/" to dependencies list)
+#
+# Revision 1.119 2002/09/23 03:42:41 hal9
+# This is higuita's make install/uninstall patch. Needs testing please!!!
+#
# Revision 1.118 2002/09/11 08:22:37 oes
# Fixed path (C_HDRS are in src/ now)
#
projects / privoxy.git / blobdiff