-# Note: Makefile is built automatically from Makefile.in
+# Note: GNUmakefile is built automatically from GNUmakefile.in
#
-# $Id: GNUmakefile.in,v 1.171 2008/06/13 15:24:57 fabiankeil Exp $
+# $Id: GNUmakefile.in,v 1.238 2016/04/04 10:50:54 fabiankeil Exp $
#
-# Written by and Copyright (C) 2001 - 2008 the SourceForge
+# Written by and Copyright (C) 2001-2014 members of the
# Privoxy team. http://www.privoxy.org/
#
# Based on the Internet Junkbuster originally written
-# by and Copyright (C) 1997 Anonymous Coders and
+# by and Copyright (C) 1997 Anonymous Coders and
# Junkbusters Corporation. http://www.junkbusters.com
#
-# This program is free software; you can redistribute it
+# This program is free software; you can redistribute it
# and/or modify it under the terms of the GNU General
# Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at
VERSION_POINT = @VERSION_POINT@
CODE_STATUS = @CODE_STATUS@
VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
-RPM_VERSION = $(VERSION)
-RPM_PACKAGEV = ""
-SNAPVERSION = $(RPM_VERSION)-$(shell date "+%Y%m%d")
+SNAPVERSION = $(VERSION)-$(shell date "+%Y%m%d")
#############################################################################
SBIN_DEST = @sbindir@
MAN_DIR = @mandir@
MAN_DEST = $(MAN_DIR)/man1
+MAN_PAGE = privoxy.1
SHARE_DEST = @datadir@
DOC_DEST = $(SHARE_DEST)/doc/privoxy
VAR_DEST = @localstatedir@
LOGS_DEST = $(VAR_DEST)/log/privoxy
PIDS_DEST = $(VAR_DEST)/run
-# if $prefix = /usr/local then the default CONFDEST change from
-# CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy
+# if $prefix = /usr/local then the default CONFDEST change from
+# CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy
# by the target rule CONF_DEST
#
# also if the $prefix is /usr/local and there is no
# $(SHARE_DEST)/doc, it checks for $prefix/doc and installs there
# instead in this situation
#
-# finally if $prefix=/usr/local and VAR_DEST=$prefix/var it
+# finally if $prefix=/usr/local and VAR_DEST=$prefix/var it
# changes this to /var for storing the logs and pidfile
# used in source dir only, the install goes to $share_dest/doc/privoxy
# Binaries
BIN_MODE = 0755
# Support files, docs, etc.
-RA_MODE = 0664
+RA_MODE = 0644
# Directory
DIR_MODE = 0755
# Files daemon writes to.
RWD_MODE = 0660
-INSTALL_P = -m $(BIN_MODE)
+INSTALL_P = -m $(BIN_MODE)
INSTALL_T = -m $(RA_MODE)
INSTALL_D = -m $(DIR_MODE) -d
INSTALL_R = -m $(RWD_MODE)
# install options for superuser install
-#INSTALL_S = -g @GROUP@ -o @USER@
+#INSTALL_S = -g @GROUP@ -o @USER@
#############################################################################
# Build tools
RMDIR = rmdir
MKDIR = ./mkinstalldirs
STRIP_PROG = strip
-SED = sed
+SED = sed
GREP = grep
CAT = cat
-RPM = rpm
-RPMBUILD = rpmbuild
-MV = mv
+MV = mv
TAR = tar
LN = ln
TOUCH = touch
CHOWN = chown
CHGRP = chgrp
GROUPS = groups
-WDUMP = @WDUMP@ -dump
+W3M_DUMP = env -u LANG LC_ALL=C @W3M@ -dump
+W3M_DUMP_UTF8 = @W3M@ -dump
JADECAT = @JADECAT@
JADEBIN = @JADEBIN@
DB = $(JADEBIN) $(JADECAT) -ihtml -t sgml -D.. -d ldp.dsl\#html
G2H_CMD = groff -mandoc -Thtml
TARGET_OS = @host@
PERL = perl
-DOC_DIR = doc/source
+DOC_DIR = doc/source
DOC_TMP = $(DOC_DIR)/tmp
DOC_STATUS = @DOC_STATUS@
+TIDY = tidy -modify -indent -wrap 78 --tidy-mark no
+RSYNC = rsync -av -c
# Program to do LF->CRLF
-#
-# The sed version should be the most portable, but it doesn't for for me,
-# the other two do. FIXME.
-# - Jon
-#DOSFILTER = $(SED) -e $$'s,$$,\r,'
-#DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
DOSFILTER = $(PERL) -p -e 's/\n/\r\n/'
CVSROOT = :pserver:anonymous@ijbswa.cvs.sourceforge.net:/cvsroot/ijbswa
#TMPDIR := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX)
+# If your SF user name differs from your local one,
+# change this to "ssh -l sf-username"
+SSH = ssh
+WWW_ROOT = /home/project-web/ijbswa
+# SourceForge login name used by the 'sf-shell' target (optional)
+SOURCE_FORGE_NAME = ''
#############################################################################
-# Setup for make distribution rh and suse for now
+# Setup for make distribution for now.
#############################################################################
-TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz
-RPM_BASE = @RPM_BASE@
+TAR_ARCH = /tmp/privoxy-$(VERSION).tar.gz
#############################################################################
# We include these files in our distributions
#############################################################################
-CONFIGS = config trust default.action standard.action user.action default.filter user.filter
+CONFIGS = config trust default.action match-all.action user.action default.filter user.filter
# take care that no CVS .cvsignore or other crappy files
# are included here
# and escape every '#' in the find. doh.
DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \
`find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \
`find doc/webserver/ -name "*.css"` \
- privoxy.1 \
- doc/pdf/*.pdf
+ $(MAN_PAGE)
#############################################################################
# Filenames and libraries
C_OBJS = $(C_SRC:.c=.@OBJEXT@)
C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h
+CLIENT_TAG_SRC = @FEATURE_CLIENT_TAGS_ONLY@client-tags.c
+CLIENT_TAG_OBJS = @FEATURE_CLIENT_TAGS_ONLY@client-tags.@OBJEXT@
+
W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c w32svrapi.c
W32_FILES = @WIN_ONLY@w32.res
W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES)
# PThreads library, if needed.
PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@
-SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC)
-OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS)
+SRCS = $(C_SRC) $(CLIENT_TAG_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC)
+OBJS = $(C_OBJS) $(CLIENT_TAG_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS)
HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS)
LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB)
# possibly other OSs).
SPECIAL_CFLAGS = @SPECIAL_CFLAGS@
-# Add your flags here
-OTHER_CFLAGS =
+# Add your flags here
+OTHER_CFLAGS =
CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
- @STATIC_PCRE_ONLY@ -Ipcre
+ @STATIC_PCRE_ONLY@ -Ipcre
LDFLAGS = @LDFLAGS@ $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
#############################################################################
# Phony targets
#############################################################################
-.PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \
-suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
-install conectiva-spec conectiva-dist conectiva-upload CONF_DEST LOG_DEST \
+.PHONY: all inifiles \
+win-dist tarball-dist dok webserver clean clobber tags \
+install CONF_DEST LOG_DEST \
PID_DEST check_doc install-strip uninstall GROUP_T
#############################################################################
# Strip master copy comments from default.action:
#############################################################################
default.action: default.action.master
- $(GREP) -v '^#MASTER#' $< > $@
-
+ $(GREP) -v '^#MASTER#' default.action.master > $@
#############################################################################
# Win32 config files
#############################################################################
config.txt: config
$(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
- -e 's!\jarfile jarfile!jarfile jar.log!' \
-e 's!\logfile logfile!logfile privoxy.log!' \
-e 's!#Win32-only: !!' \
< $< | \
$(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
trust.txt: trust
- $(DOSFILTER) < $< > $@
+ $(DOSFILTER) < $< > $@
#############################################################################
# Pre-dist check:
#############################################################################
# create tar.gz from CVS:
-# This make-target is usually called through 'create-archive'. If you
+# This make-target is usually called through 'create-archive'. If you
# run 'make create-snapshot' without setting SNAPVERSION, you'll get a
-# tar.gz with the current date in the name and as a releasenumber in the
-# spec-file. But the main usage is to run it as follows (Red Hat example):
+# tar.gz with the current date in the name.
+# The main usage is to run it as follows (Red Hat example):
# make SNAPVERSION=1.6x create-snapshot
-# This creates a tar.gz and spec-file for a Red Hat 6.x version.
+# This creates a tar.gz.
#############################################################################
create-snapshot:
@tag=`cvs -d $(CVSROOT) status Makefile | awk ' /Sticky Tag/ { print $$3 } '` 2> /dev/null; \
TMPDIR=$(shell mktemp -d /tmp/$(PROGRAM).XXXXXX); \
cd $$TMPDIR ; cvs -Q -d $(CVSROOT) export -r $$tag current || echo "Um... export aborted."; \
cd $$TMPDIR/current; \
- TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
- if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
- -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
- privoxy-rh.spec > $$TMPFILE ; then \
- $(MV) -f $$TMPFILE privoxy-rh.spec; \
- else \
- $(ECHO) "Could not set version info in specfile."; \
- exit 1;\
- fi;\
- if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
- -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
- privoxy-suse.spec > $$TMPFILE ; then \
- $(MV) -f $$TMPFILE privoxy-suse.spec; \
- else \
- $(ECHO) "Could not set version info in specfile."; \
- exit 1;\
- fi; \
- $(RM) $$TMPFILE; \
- cd $$TMPDIR/current; \
$(TAR) --exclude ".cvsignore" --exclude "CVS" \
-czf /tmp/$(PROGRAM)-$(VERSION).tar.gz .; \
$(RM) -rf $$TMPDIR
#############################################################################
# looks at the version of Makefile and exports a corresponding source-tree
-# example: if the Makefile has the sticky tag v_2_9_13, you'll get
-# privoxy-*-2.4.13.tar.gz. Two different tar files will be written, one for
-# Red Hat and one for SuSe (different spec-files)
+# example: if the Makefile has the sticky tag v_2_9_13, you'll get
+# privoxy-*-2.4.13.tar.gz.
#############################################################################
create-archive:
make SNAPVERSION=$(SNAPVERSION) create-snapshot
-#############################################################################
-# RPM specifice stuff (SuSE or Redhat, ..)
-#############################################################################
-rpm-stuff: dist-check clean clobber
- for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
- if [ ! -w $(RPM_BASE)/$$dir ]; then \
- $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
- $(ECHO) "Or add a suitable path to .rpmmacros like."; \
- $(ECHO) "%_topdir /home/foo/rpm-build"; \
- exit 1; \
- fi; \
- done; \
-
-check-release:
- @if [ "$(RPM_PACKAGEV)" = "" ]; then \
- echo ; \
- echo " ERROR: NO RPM_PACKAGEV VALUE"; \
- echo " No value given for RPM_PACKAGEV. Please use:"; \
- echo " make dist-upload RPM_PACKAGEV=release"; \
- echo " where \"release\" is the release number you want to and"; \
- echo " where \"dist\" is the name of the distro (redhat or suse)"; \
- echo ; \
- echo " Ex: make redhat-upload RPM_PACKAGEV=1"; \
- echo ""; \
- echo "ATTENTION: If your distribution use a specific tag on the"; \
- echo " release field (like \"cl\" for Conectiva, and"; \
- echo " \"mdk\" for Mandrake), DO NOT put it on the value"; \
- echo " given to RPM_PACKAGEV. It will be added automaticaly."; \
- echo " Do it like you would do for a redhat package,"; \
- echo " (i.e. just the number)."; \
- echo ; \
- exit 1; \
- fi
-
-
-#############################################################################
-# Create Conectiva specfile from RedHat specfile
-#############################################################################
-conectiva-spec:
- $(RM) privoxy-cl.spec
- chmod a+x genclspec.sh
- ./genclspec.sh
-
-#############################################################################
-# Conectiva distribution for x86
-#############################################################################
-conectiva-dist: rpm-stuff conectiva-spec
-
- $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-rh.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
- $(RPMBUILD) --clean -ta $(TAR_ARCH)
- if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
-
-conectiva-upload: check-release
- make redhat-upload RPM_PACKAGEV=$(RPM_PACKAGEV)cl
-
-#############################################################################
-# redhat distribution alpha and x86
-#############################################################################
-redhat-dist: rpm-stuff
- echo $(CONFIG_FILES)
- $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
- $(RPMBUILD) --clean -ta $(TAR_ARCH)
- if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
-
-# For testing build issues only! Use redhat-dist for official releases.
-redhat-test:
- echo $(CONFIG_FILES)
- $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
- $(RPMBUILD) --clean -tb $(TAR_ARCH)
- if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
- @echo "WARNING: This target is only for testing. Use redhat-dist for releases!!!"
-
-# anonymously ncftps the rpms to sourceforge
-redhat-upload: check-release
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
-# better should use `arch` here instead of ix86 to support other platforms too
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
- @$(ECHO) -------------------------------------------------------
- @$(ECHO) Now goto
- @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
- @$(ECHO) ... and release the files.
- @$(ECHO) -------------------------------------------------------
- # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
-
-
-#############################################################################
-# Creates a Red Hat sourcepackage from CVS (not from the current sources
-# on disk)
-#############################################################################
-redhat-srpm:
- make create-archive
- $(RPMBUILD) -ts --nodeps $(PROGRAM)-$(VERSION).tar.gz
-
-
-#############################################################################
-# suse distribution. works fine. no need to be root.
-#############################################################################
-suse-dist: rpm-stuff
-# TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
-# if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
-# -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
-# privoxy-suse.spec > $$TMPFILE ; then \
-# $(MV) -f $$TMPFILE privoxy-suse.spec; \
-# else \
-# $(ECHO) "Could not set version info in specfile."; \
-# exit 1;\
-# fi
-
- $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
- $(RPMBUILD) --clean -ta $(TAR_ARCH)
- if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
-
-# anonymously ncftps the rpms to sourceforge
-suse-upload: check-release
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
-# better should use `arch` here instead of ix86 to support other platforms too
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
- @$(ECHO) -------------------------------------------------------
- @$(ECHO) Now goto
- @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
- @$(ECHO) ... and release the files.
- @$(ECHO) -------------------------------------------------------
-
-# handle with care. use with root.
-suse-clean:
- $(RPM) -e junkbuster-suse || true
- $(RM) -r /etc/junkbuster
- $(RM) -r /etc/rc.d/junkbuster*
- $(RM) -r /var/run/junkbuster.pid
- $(RM) -r /var/log/junkbuster
- $(RM) /etc/init.d/junkbuster
- $(RM) /usr/sbin/junkbuster
- $(RM) /usr/sbin/rcjunkbuster
- $(RM) /usr/share/man/man1/junkbuster.1.gz
- $(RPM) -e privoxy-suse || true
- $(RM) -r /etc/privoxy
- $(RM) -r /etc/rc.d/privoxy*
- $(RM) -r /var/run/privoxy.pid
- $(RM) -r /var/log/privoxy
- $(RM) /etc/init.d/privoxy
- $(RM) /usr/sbin/privoxy
- $(RM) /usr/sbin/rcprivoxy
- $(RM) /usr/share/man/man1/privoxy.1.gz
-
#############################################################################
# generic distribution
#############################################################################
# add config files
for foo in $(CONFIG_FILES); do \
(cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
- done;
+ done;
# add documentation
for foo in $(DOC_FILES); do \
(cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
gen-clean:
$(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar*
-#############################################################################
-# solaris distribution. verified on SF machines by swa.
-#############################################################################
-solaris-dist: gen-dist
- @$(ECHO) Done.
-# anonymously ncftps the package to sourceforge
-solaris-upload: gen-upload
- @$(ECHO) Done.
-# use with care
-solaris-clean: gen-clean
- @$(ECHO) Done.
-
-#############################################################################
-# hpux distribution
-#############################################################################
-hpux-dist:
- @$(ECHO) coming soon.
-hpux-upload:
- @$(ECHO) coming soon.
-
-#############################################################################
-# debian distribution
-#############################################################################
-debian-dist:
- @$(ECHO) coming soon.
-debian-upload:
- @$(ECHO) coming soon.
-
-#############################################################################
-# macosx distribution
-#############################################################################
-macosx-dist:
- @$(ECHO) coming soon.
-macosx-upload:
- @$(ECHO) coming soon.
-
-#############################################################################
-# amiga distribution
-#############################################################################
-amiga-dist:
- @$(ECHO) coming soon.
-amiga-upload:
- @$(ECHO) coming soon.
-
-#############################################################################
-# freebsd distribution. verified on SF machines by swa.
-#############################################################################
-freebsd-dist: gen-dist
- @$(ECHO) Done.
-# anonymously ncftps the package to sourceforge
-freebsd-upload: gen-upload
- @$(ECHO) Done.
-# use with care
-freebsd-clean: gen-clean
- @$(ECHO) Done.
-
-#############################################################################
-# Windows distribution
-#############################################################################
-win-dist:
- $(ECHO) Not implemented.
-
-
#############################################################################
# Tarball distribution: No CVS dirs, dotfiles, debian build dir,
# (FIXME:) only parts of the static / generated docs mix in doc/webserver
for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \
-o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o \
- -name "PACKAGERS" -o -path "*/pdf/*" \)`; do \
+ -name "PACKAGERS" \)`; do \
files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \
done && \
cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \
# and zip the archive
- $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
+ $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
$(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar
@$(ECHO) Tarball distribution created.
#
# Documentation
#
-# converts doc/source/*.sgml into html, pdf and man pages
+# converts doc/source/*.sgml into html and man pages
#
#############################################################################
# developer manual
-dok-devel:
+dok-devel:
$(RM) doc/webserver/developer-manual/*.html
$(RM) -r doc/source/developer-manual
mkdir -p doc/source/developer-manual
cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/
# user manual
-dok-user:
+dok-user:
$(RM) doc/webserver/user-manual/*.html
$(RM) -r doc/source/user-manual/
mkdir -p doc/source/user-manual
$(PERL) -pi.bak -e 's/<\/head/\n<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"p_doc.css\">\n<\/head/i' doc/webserver/user-manual/*html
# faq
-dok-faq:
+dok-faq:
$(RM) doc/webserver/faq/*.html
$(RM) -r doc/source/faq
mkdir -p doc/source/faq
cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/
-# man page, one variation. Try to use the next target, just 'make man'.
-dok-man:
+# man page, one variation. Try to use the next target, just 'make man'.
+dok-man:
$(RM) doc/man/* doc/webserver/man-page/*.html
-ifneq ($(MAN2HTML),false)
- $(ECHO) "<html><head><title>Privoxy Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html
- man ./privoxy.1 | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html
- $(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html
-else
- $(MAKE) groff2html
-endif
+ echo MAN2HTML is $(MAN2HTML)
+ @if [ $(MAN2HTML) != "false" ]; then \
+ $(ECHO) "<html><head><title>Privoxy Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html; \
+ man ./$(MAN_PAGE) | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html; \
+ $(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html; \
+ else \
+ $(MAKE) groff2html; \
+ fi;
# Build man page from sgml. This requires the SGMLSpm perl module.
-# See CPAN, or your favorite perl repository. This is the preferred
+# See CPAN, or your favorite perl repository. This is the preferred
# target for man page generation!
man: dok-release
mkdir -p doc/source/temp && cd doc/source/temp && $(RM) * ;\
nsgmls ../privoxy-man-page.sgml | sgmlspl ../../../utils/docbook2man/docbook2man-spec.pl &&\
- perl -pi.bak -e 's/ <URL:.*>//; s/\[ /\[/g' privoxy.1 ;\
- $(DB) ../privoxy-man-page.sgml && $(MV) -f privoxy.1 ../../../privoxy.1
+ perl -pi.bak -e 's/ <URL:.*>//; s/\[ /\[/g' $(MAN_PAGE) ;\
+ perl -pi.bak -e "s/\[ /\[/g;s/á/\\\\['a]/g;s/é/\\\\['e]/g" $(MAN_PAGE); \
+ perl -pi.bak -e "s/ö/\\\\[:o]/g" $(MAN_PAGE); \
+ perl -pi.bak -e 's/([ {])-([a-z])/$$1\\-$$2/g' $(MAN_PAGE); \
+ perl -pi.bak -e 's/ --([a-z])/ \\-\\-$$1/g' $(MAN_PAGE); \
+ perl -pi.bak -e 's/\\fB--/\\fB\\-\\-/g' $(MAN_PAGE); \
+ $(DB) ../privoxy-man-page.sgml && $(MV) -f $(MAN_PAGE) ../../../$(MAN_PAGE)
# For those with man2html ala RH7s.
man2html:
mkdir -p doc/webserver/man-page
-ifneq ($(MAN2HTML),false)
- $(MAN2HTML) privoxy.1 |grep -v "^Content-type" > tmp.html
- $(PERL) -pi.bak -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' tmp.html
- $(PERL) -pi.bak -e 's/(<\/HEAD>)/<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"..\/p_doc.css\"><\/HEAD>/' tmp.html
-# Twice because my version of man2html is pulling in commas and periods in URLs.
- $(PERL) -pi.bak -e 's/(<A.*),(">)/$$1$$2/g' tmp.html
- $(PERL) -pi.bak -e 's,\.">,">,g' tmp.html
-# Get rid of spurious \a from conversion. (How to do this with perl?)
- $(SED) -e 's/\a//g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.*
-else
- $(MAKE) groff2html
-endif
-
+ @if [ $(MAN2HTML) != "false" ]; then \
+ $(MAN2HTML) $(MAN_PAGE) |grep -v "^Content-type" > tmp.html; \
+ $(PERL) -pi.bak -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' tmp.html; \
+ $(PERL) -pi.bak -e 's/(<\/HEAD>)/<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"..\/p_doc.css\"><\/HEAD>/' tmp.html; \
+ $(PERL) -pi.bak -e 's/(<A.*),(">)/$$1$$2/g' tmp.html; \
+ $(PERL) -pi.bak -e 's,\.">,">,g' tmp.html; \
+ $(PERL) -pi.bak -e "s/\['a\]/\á/g;s/\['e\]/\é/g" tmp.html; \
+ $(SED) -e 's/\a//g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.*; \
+ else \
+ $(MAKE) groff2html; \
+ fi;
# Otherwise we get plain groff conversion.
groff2html:
- $(G2H_CMD) ./privoxy.1 | $(SED) -e 's@</head>@<link REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></head>@' > doc/webserver/man-page/privoxy-man-page.html
+ $(G2H_CMD) ./$(MAN_PAGE) | $(SED) -e 's@</head>@<link REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></head>@' > doc/webserver/man-page/privoxy-man-page.html
# readme page and INSTALL file
dok-readme: dok-release
cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html &&\
- env -u LANG $(WDUMP) tmp.html > ../../README ;\
+ $(W3M_DUMP) tmp.html > ../../README ;\
$(DB)-notoc -V nochunks install.sgml > tmp.html &&\
- env -u LANG $(WDUMP) tmp.html > ../../INSTALL ;\
+ $(W3M_DUMP) tmp.html > ../../INSTALL ;\
$(RM) tmp.*
# index.sgml is used to create both the Home Page, and a local index
# for documentation, etc.
#
# index.html for webserver:
-dok-webserver:
+dok-webserver:
cd doc/source/webserver && $(DB)-notoc -ip-homepage -V nochunks index.sgml > ../../webserver/index.html
$(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
- s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
s/\.\d\. //;\
- s/__copy/©/'\
+ s/__copy/©/;\
+ s@ChameleonJohn@<br><a href="http://www.chameleonjohn.com/"><img align="center"\
+ src="images/sponsors/chameleonjohn.png" alt="ChameleonJohn Coupons"></a>@' \
doc/webserver/index.html && $(RM) doc/webserver/*.bak
# privoxy-index.html for local documentation:
-dok-index:
+dok-index:
cd doc/source/webserver && $(DB)-notoc -ip-index -V nochunks index.sgml > ../../webserver/privoxy-index.html
$(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
- s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
s/\.\d\. //;\
s/__copy/©/' \
doc/webserver/privoxy-index.html && $(RM) doc/webserver/*.bak
dok: dok-release dok-devel dok-user dok-faq dok-readme dok-webserver dok-authors dok-index
@$(ECHO) Documentation created.
-#
-# an alternative to the above dok. disabled man page creation for the moment
-#
-redhat-dok: dok-release dok-devel dok-user dok-faq redhat-readme dok-webserver dok-authors
- @$(ECHO) Documentation created.
-
-## Make README
-redhat-readme:
- cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html && $(WDUMP) \
- tmp.html > ../../README && $(RM) -r tmp.html
-
## Make AUTHORS file
-dok-authors:
- cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && env -u LANG $(WDUMP) \
+dok-authors:
+ cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && $(W3M_DUMP_UTF8) \
tmp.html > ../../AUTHORS && $(RM) tmp.html
# Set doc entities for VERSION and CODE_STATUS in sgml docs. Toggle content
s/<!entity +p-status.*>/<!entity p-status "$(CODE_STATUS)">/' \
doc/source/*sgml doc/source/*/*sgml
$(RM) -r doc/source/*bak doc/source/*/*bak
-ifeq ($(CODE_STATUS),stable)
- @$(ECHO) Setting docs to stable $(VERSION)
- @$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "INCLUDE">/;\
- s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "IGNORE">/' \
- doc/source/*sgml doc/source/*/*sgml
- $(RM) -r doc/source/*bak doc/source/*/*bak
-else
- @$(ECHO) Setting docs to not stable $(VERSION)
- @$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "IGNORE">/;\
- s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "INCLUDE">/' \
- doc/source/*sgml doc/source/*/*sgml
- $(RM) -r doc/source/*bak doc/source/*/*bak
-endif
-
-# Generate single page html. Used only for creating pdf docs (ATM).
-# Currently using: See http://www.easysw.com/htmldoc/pdf-o-matic.php.
-# If using this generator, remember U-M has a couple of graphics in
-# a parallel directory.
-#
-dok-shtml: dok-release
- mkdir -p doc/source/temp # this directory not in cvs
- cd doc/source && $(DB) -iuser-man -V nochunks user-manual.sgml > temp/privoxy-user-manual.html
- cd doc/source && $(DB) -V nochunks developer-manual.sgml > temp/privoxy-developer-manual.html
- cd doc/source && $(DB) -V nochunks faq.sgml > temp/privoxy-faq.html
-# one could use html2ps and ps2pdf. well, that does not work. htmlps produces incorrect output.
-
-# Make pdf docs from single page html. Requires htmldoc, see
-# (http://www.easysw.com/htmldoc/). Note: 1.8.20 has a TOC bug.
-# PDF docs are uploaded to webserver as zip archive.
-dok-pdf: dok-shtml
- @$(ECHO) -n "starting htmldoc version: ";
- if htmldoc --version ; then : ; \
- else $(ECHO) "WARNING: could not get htmldoc version" ; fi
- cd utils/ldp_print && $(RM) *html *bak *jpg *tmp *pdf *zip
- cp -f doc/source/temp/*html doc/webserver/user-manual/*jpg utils/ldp_print
- cd utils/ldp_print ;\
- $(PERL) -pi.bak -e 's/\.\.\/images\///; s/(<\/?)SUB/$$1small/i;\
- s/\.\.\/user-manual\/index\.html/privoxy-user-manual.pdf/;\
- s/\.\.\/developer-manual\/index\.html/privoxy-developer-manual.pdf/;\
- s/\.\.\/faq\/index\.html/privoxy-faq.pdf/' *.html ;\
- for i in developer-manual user-manual faq; do \
- ./ldp_print privoxy-$$i.html ;\
- $(ECHO) DONE: privoxy-$$i.pdf ;\
- done ;\
- $(MV) *.pdf ../../doc/pdf ;\
- $(RM) -r *html *bak *jpg *pdf *zip ../../doc/source/temp
-
-# Create release announcement in text and html, with short and long versions.
-# This is a standalone target, and must be invoked directly.
-# announce: dok-release
-# mkdir -p $(DOC_TMP)
-# cd $(DOC_TMP) && cp -f ../announce.sgml . && $(DB) -iannounce-big announce.sgml &&\
-# mv -f index.html announce.html && $(WDUMP) announce.html > announce.txt
-# cd $(DOC_TMP) && $(DB) announce.sgml &&\
-# mv -f index.html announce-mini.html && $(WDUMP) announce-mini.html > announce-mini.txt &&\
-# mv -f *html *txt ../../..
-# rm -fr $(DOC_TMP)
-
-# The main Privoxy config file, generated from sgml sources.
-# NOTE: This will require some hand editing. The new file is outputted
-# as config.new so that problem sections can be compared to previous
-# version. This is hardcored to w3m for html/text conversion. Also,
-# requires the shell util 'fmt'.
-config-file: dok-release
- cd doc/source && $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
- env -u LANG w3m -dump __tmp.html | fmt -w 70 > ../../config.new && $(RM) -r __tmp.*
- $(PERL) -i.bak utils/prepare-configfile.pl config.new
-
- $(RM) *.bak
+ @if [ $(CODE_STATUS) = "stable" ]; then \
+ $(ECHO) Setting docs to stable $(VERSION); \
+ $(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "INCLUDE">/;\
+ s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "IGNORE">/' \
+ doc/source/*sgml doc/source/*/*sgml; \
+ else \
+ $(ECHO) Setting docs to not stable $(VERSION); \
+ $(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "IGNORE">/; \
+ s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "INCLUDE">/' \
+ doc/source/*sgml doc/source/*/*sgml; \
+ fi;
+ $(RM) -r doc/source/*bak doc/source/*/*bak;
+
+# The main Privoxy config file, generated from sgml sources.
+# NOTE: This will require some hand editing.
+config-file: dok-release generate-config-file
+
+ $(RM) config.bak config.html
@$(ECHO) "****************************************************"
- @$(ECHO) "The output file is config.new."
- @$(ECHO) "Now -- you need to hand edit the results!!!"
+ @$(ECHO) "The config file has been optimistically updated"
+ @$(ECHO) "Now -- you may need to hand edit the results!"
@$(ECHO) "In particular, check the Debug levels, the"
@$(ECHO) "permit-access, forward & socks examples and the"
@$(ECHO) "various user-manual examples, which all"
- @$(ECHO) "probably got hammered."
+ @$(ECHO) "might have gotten hammered."
@$(ECHO) "****************************************************"
-# config file, alternate version using lynx (perl stuff unfinished). Lynx
-# does not do so good a job.
-config-file-alt:
- cd doc/source && $(ECHO) -e ".h2 JUSTIFY\\nJUSTIFY:FALSE" > __tmp.lynx_cfg &&\
- $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
- lynx -cfg=__tmp.lynx_cfg -width=78 -dump __tmp.html > ../../config.new && $(RM) -r __tmp.*
- $(PERL) -pi -e 's/^( )//;\
- s/:$\/:\n/' config.new
+generate-config-file:
+ cd doc/source && $(DB)-notoc -iconfig-file -V nochunks config.sgml > ../../config.html
+ $(W3M_DUMP) -cols 67 config.html > config
+ $(PERL) -i.bak utils/prepare-configfile.pl config
#############################################################################
#
# Webserver
#
-# moves dokumentation to webserver
+# moves documentation to webserver
#
#############################################################################
-webserver: tidy
+sf-shell:
+ @sf_name=$(SOURCE_FORGE_NAME); \
+ [ -n "$${sf_name}" ] || read -p "Enter SourceForge username: " sf_name || exit 1; \
+ echo "Opening shell for $${sf_name} ..."; \
+ ssh -t $${sf_name},ijbswa@shell.sourceforge.net create
+
+webserver: clean-editor-files
@$(ECHO) -------------------------------------------------------
- @$(ECHO) You have run make dok/redhat-dok before, right?
- @$(ECHO) Note that this command scps all stuff to the webserver,
- @$(ECHO) it will not remove obsolete documents.
+ @$(ECHO) You will need to "create" a SF shell first:
+ @$(ECHO) ssh -t SF-USER-ID,ijbswa@shell.sourceforge.net create
+ @$(ECHO) Please make sure your documentation files are up to date.
+ @$(ECHO) Note that this command updates the home page and copys
+ @$(ECHO) all stuff to the webserver, it will not remove obsolete documents.
+ @$(ECHO) Note that a botched upload can result in the documentation
+ @$(ECHO) on the website becoming unreachable! Also the CSS files
+ @$(ECHO) currently seem to end up at the wrong place.
@$(ECHO) -------------------------------------------------------
+ @$(ECHO) Replacing the user-manual symlink
+ @$(SSH) shell.sourceforge.net "cd $(WWW_ROOT)/htdocs && rm user-manual \
+ && mkdir -p $(VERSION)/user-manual && ln -s $(VERSION)/user-manual user-manual"
+
@$(ECHO) Uploading html
@cd doc/webserver; \
upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
- $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
-
- @$(ECHO) Uploading pdf
- @cd doc/pdf;\
- zip privoxy-pdf-docs *.pdf ;\
- scp -q privoxy-pdf-docs.zip ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/pdf
+ $(TAR) cf - $$upload | $(SSH) shell.sourceforge.net 'cd $(WWW_ROOT)/htdocs/; tar xvm 2>&1 | grep -v timestamp'
@$(ECHO) Fixing permissions
- @ssh ijbswa.sourceforge.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true'
- @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
- @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null; true'
+ @$(SSH) shell.sourceforge.net 'chmod -R 775 $(WWW_ROOT)/htdocs 2>/dev/null; true'
+ @$(SSH) shell.sourceforge.net 'find $(WWW_ROOT)/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
+web-actions:
+ @$(ECHO) Updating the actions on the webserver ...
+ @$(RSYNC) doc/webserver/actions/*.php shell.sourceforge.net:$(WWW_ROOT)/htdocs/actions
+ @$(ECHO) Enforcing reasonable permissions ...
+ @$(SSH) shell.sourceforge.net 'find $(WWW_ROOT)/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
-web-actions: tidy
- @$(ECHO) Uploading
- @cd doc/webserver/actions; \
- upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
- $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm'
+web-faq:
+ @$(ECHO) Updating the FAQ on the webserver ...
+ @$(RSYNC) doc/webserver/faq/*.html shell.sourceforge.net:$(WWW_ROOT)/htdocs/faq
+ @$(ECHO) Enforcing reasonable permissions ...
+ @$(SSH) shell.sourceforge.net 'find $(WWW_ROOT)/htdocs/faq/ -type f | xargs chmod 664 2>/dev/null'
- @$(ECHO) Fixing permissions
- @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
- @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
-
-##
-dok-put:
- tar --exclude ".cvsignore" --exclude "CVS" --exclude "source" --exclude ".htaccess" \
- --exclude "obsolete" --exclude "actions" --exclude "*.zip" --exclude "robots.txt"\
- doc/* INSTALL LICENSE AUTHORS README \
- -czf $(DOC_FILE) ;\
- $(ECHO) "Uploading doc package ..." ;\
- scp $(DOC_FILE) ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/docs/
- @ssh ijbswa.sourceforge.net 'chmod 775 /home/groups/i/ij/ijbswa/htdocs/docs/*gz 2>/dev/null; true'
- $(RM) $(DOC_FILE)
-
-dok-get:
- cd /tmp ;\
- $(WGET) http://www.privoxy.org/docs/$(DOC_FILE) ;\
- $(TAR) -zxvf $(DOC_FILE)
+web-user-manual:
+ @$(ECHO) Updating the user manual on the webserver (do not use in case of version changes) ...
+ @$(RSYNC) doc/webserver/user-manual/*.html shell.sourceforge.net:$(WWW_ROOT)/htdocs/user-manual/
+ @$(ECHO) Enforcing reasonable permissions ...
+ @$(SSH) shell.sourceforge.net 'find $(WWW_ROOT)/htdocs/user-manual/ -type f | xargs chmod 664 2>/dev/null'
+
+#############################################################################
+#
+# Try to clean up the generated HTML files.
+#
+# The files are such a mess that some of them require two tidy runs in a
+# row as the first one aborts prematurely. The vanilla tidy output renders
+# poorly because it contains a bit too much whitespace, so we additionally
+# run the files through perl to fix this again.
+#
+#############################################################################
+dok-tidy:
+ for html_file in `find doc/webserver -name "*.html"`; do \
+ $(TIDY) $$html_file || $(TIDY) $$html_file; \
+ $(PERL) -i'' -e 's@^\s*<br>\s*$$@@; s@ +$$@@;' -n -p $$html_file; \
+ done
#############################################################################
# Source file dependencies
#############################################################################
-actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h ssplit.h
+actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h filters.h jcc.h list.h loaders.h miscutil.h actionlist.h ssplit.h
cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h jbsockets.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actionlist.h actions.h errlog.h miscutil.h
cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h urlmatch.h
deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
encode.@OBJEXT@: encode.c encode.h config.h
errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h
-filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h urlmatch.h @WIN_ONLY@win32.h
+filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h urlmatch.h @WIN_ONLY@win32.h
gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h w32svrapi.h cgi.h
gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h
# PCRS
-pcrs.@OBJEXT@: pcrs.c pcrs.h config.h pcre/pcre.h
+pcrs.@OBJEXT@: pcrs.c pcrs.h config.h @STATIC_PCRE_ONLY@pcre/pcre.h
# PCRE
pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h
pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h
-pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c
+pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c
pcre/pcreposix.@OBJEXT@: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h
pcre/study.@OBJEXT@: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h
w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h w32svrapi.h
-w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/privoxy.ico config.h
+w32.res: w32.rc w32res.h icons/radar-01.ico icons/radar-02.ico icons/radar-03.ico icons/radar-04.ico icons/radar-05.ico icons/radar-06.ico icons/radar-07.ico icons/radar-08.ico icons/idle.ico icons/privoxy.ico config.h
windres -D__MINGW32__=0.2 -O coff -i $< -o $@
# AmigaOS
$(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
clean:
- $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) default.action `find . -name TAGS -o -name tags` config.base config.tmp
+ $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) default.action \
+ config.base config.tmp \
+ `find . \( -name TAGS -o -name tags \) -and -not -path "./.git/refs/tags"` \
+ `find . -name "*.orig" -a -not -name rc.privoxy.orig`
-tidy:
+clean-editor-files:
$(RM) `find . -name "*~"`
$(RM) `find . -name "#*#"` # Emacs backup files
$(RM) `find . -name ".\#*"`
-clobber: tidy
+clobber: clean-editor-files
$(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \
privoxy.log core *.tar.gz *.tar privoxy-cl.spec doc/source/ldp.dsl config.new
$(RM) -r autom4te.cache
#
-# FIXME: What is all this?
+# FIXME: What is all this?
#
- $(RM) cscope.* *.pdb *.lib *.exp
+ $(RM) cscope.* *.pdb *.lib *.exp
distclean: clobber
install-strip:
$(MAKE) install STRIP=-s
-# FIXME: Test USER and GROUP on Slack to make sure this works as
+# FIXME: Test USER and GROUP on Slack to make sure this works as
# intended.
#
-# FIXME: id handling needs help, probably via configure, since 'id -u' is not
-# universally reliable (eg Solaris). Group handling could be better.
+# FIXME: id handling needs help, probably via configure, since 'id -u' is not
+# universally reliable (eg Solaris). Group handling could be better.
# Perhaps the whole user/group validation should be done here, and simplified.
PROGRAM_V = Privoxy $(VERSION) $(CODE_STATUS)
install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T
@if [ -n "$(USER)" ]; then \
$(ID) $(USER) >/dev/null || exit 1;\
fi
- @# Test for valid group. FIXME. USER does not have to belong to GROUP
+ @# Test for valid group. FIXME. USER does not have to belong to GROUP
@# for file ownership purposes.
# if [ -n "$(GROUP_T)" ] && [ -n "$(USER)" ] && ! $(GROUPS) $(USER) | $(GREP) "\<$(GROUP_T)\>" >/dev/null; then \
# $(ECHO) Group $(GROUP_T) for User $(USER) is invalid && exit 1 ;\
$(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC/user-manual;\
fi
@# Not all platforms support gzipped man pages.
- @$(ECHO) Installing man page to $(DESTDIR)$(MAN_DEST)/privoxy.1
- -$(INSTALL) $(INSTALL_T) privoxy.1 $(DESTDIR)$(MAN_DEST)/privoxy.1
+ @$(ECHO) Installing man page to $(DESTDIR)$(MAN_DEST)/$(MAN_PAGE)
+ -$(INSTALL) $(INSTALL_T) $(MAN_PAGE) $(DESTDIR)$(MAN_DEST)/$(MAN_PAGE)
@# Change the config file default directories according to the configured ones
@$(ECHO) Rewriting config for this installation
$(SED) 's+^#\?user-manual .*+user-manual $(prefix)/doc/privoxy/user-manual/+' config.tmp >config.updated ;\
fi;\
$(MV) config config.base
- $(MV) config.updated config
+ $(MV) config.updated config
- @# Install the config support files. Test for root install, and abort
- @# if there is no privoxy user, and no other user was enabled during
+ @# Install the config support files. Test for root install, and abort
+ @# if there is no privoxy user, and no other user was enabled during
@# configure. Later, install init script if appropriate.
@$(ECHO) Installing templates to $(DESTDIR)$(CONF_DEST)/templates
@for i in `find templates -type f`; do \
fi ;\
$(ECHO) Installing configuration files to $(DESTDIR)$(CONF_DEST);\
for i in $(CONFIGS); do \
- if [ "$$i" = "default.action" ] || [ "$$i" = "default.filter" ] || [ "$$i" = "standard.action" ]; then \
+ if [ "$$i" = "default.action" ] || [ "$$i" = "default.filter" ] ; then \
$(RM) $(DESTDIR)$(CONF_DEST)/$$i ;\
$(ECHO) Installing fresh $$i;\
$(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\
fi ;\
[ ! -f $(DESTDIR)$(LOG_DEST)/logfile ] && $(ECHO) Creating logfiles in $(DESTDIR)$(LOG_DEST) || \
$(ECHO) Checking logfiles in $(DESTDIR)$(LOG_DEST) ;\
- $(TOUCH) $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(LOG_DEST)/jarfile || exit 1 ;\
+ $(TOUCH) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\
if [ x$$USER != x ]; then \
- $(CHOWN) $$USER $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(LOG_DEST)/jarfile || \
+ $(CHOWN) $$USER $(DESTDIR)$(LOG_DEST)/logfile || \
$(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
fi ;\
if [ x$$GROUP_T != x ]; then \
- $(CHGRP) $$GROUP_T $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(LOG_DEST)/jarfile || \
+ $(CHGRP) $$GROUP_T $(DESTDIR)$(LOG_DEST)/logfile || \
$(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
fi ;\
- $(CHMOD) $(RWD_MODE) $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(LOG_DEST)/jarfile || exit 1 ;\
+ $(CHMOD) $(RWD_MODE) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\
if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
$(SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \
$(INSTALL) $(INSTALL_P) slackware/rc.privoxy $(DESTDIR)/etc/rc.d/ ;\
$(ECHO) "Installing for Slackware." ;\
$(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\
- elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
- $(ECHO) "Installing init script to /etc/rc.d/init.d/privoxy" ;\
- $(SED) 's,^PRIVOXY_BIN=.*,PRIVOXY_BIN="/usr/local/sbin/$(PROGRAM)",' privoxy.init |\
- $(SED) 's,^PRIVOXY_CONF=.*,PRIVOXY_CONF="$(CONF_DEST)/config",' |\
- $(SED) "s,^PRIVOXY_USER=.*,PRIVOXY_USER=$$USER," > init.tmp ;\
- $(INSTALL) $(INSTALL_P) init.tmp $(DESTDIR)/etc/rc.d/init.d/privoxy && $(RM) init.tmp;\
- $(MKDIR) $(DESTDIR)/etc/logrotate.d/ ;\
- $(ECHO) "Installing logrotate script to $(DESTDIR)/etc/logrotate.d/" ;\
- $(INSTALL) -m 0644 privoxy.logrotate $(DESTDIR)/etc/logrotate.d/privoxy ;\
elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
$(ECHO) "Installing generic init script to $(DESTDIR)/etc/init.d/privoxy" ;\
$(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\
@$(ECHO) Starting Privoxy uninstallation
@# KILL privoxy if running
@# XXX: the chkconfig line may need a DESTDIR prefix.
- -@if [ -f $(DESTDIR)/etc/redhat-release ] && [ -x $(DESTDIR)/etc/rc.d/init.d/privoxy ]; then \
- $(DESTDIR)/etc/rc.d/init.d/privoxy stop >/dev/null 2>/dev/null ;\
- chkconfig --del $(PROGRAM) 2>/dev/null;\
- fi
-@test -f $(DESTDIR)$(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
$(KILL) `$(CAT) $(DESTDIR)$(PID_DEST)/privoxy.pid` || :
-@test -f $(DESTDIR)/var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
@# man page and docs
@$(ECHO) Removing $(PROGRAM) docs
- -$(RM) $(DESTDIR)$(MAN_DEST)/privoxy.1*
+ -$(RM) $(DESTDIR)$(MAN_DEST)/$(MAN_PAGE)*
-$(RM) -r $(DESTDIR)$(DOC_DEST) || $(RM) -r $(DESTDIR)$(prefix)/doc/privoxy
- @# Log and jarfile and pidfile
+ @# Log and pidfile
@$(ECHO) Removing $(PROGRAM) logs
- -$(RM) $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(PID_DEST)/privoxy.pid $(DESTDIR)$(LOG_DEST)/jarfile
+ -$(RM) $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(PID_DEST)/privoxy.pid
@# Final clean up of unused directories. Special handling of CONF and LOG
# destinations.
fi;\
fi
- @# init scripts and logrotate
+ @# init scripts
@if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
$(ECHO) Removing $(PROGRAM) init script ;\
if [ -f $(DESTDIR)/etc/slackware-version ] && \
[ -d $(DESTDIR)/etc/rc.d/ ] && [ -w $(DESTDIR)/etc/rc.d/ ] ; then \
$(RM) $(DESTDIR)/etc/rc.d/rc.privoxy ;\
- elif [ -f $(DESTDIR)/etc/redhat-release ] && [ -d $(DESTDIR)/etc/rc.d/init.d/ ] \
- && [ -w $(DESTDIR)/etc/rc.d/init.d/ ] ; then \
- $(RM) $(DESTDIR)/etc/rc.d/init.d/privoxy $(DESTDIR)/etc/logrotate.d/privoxy;\
elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
$(RM) $(DESTDIR)/etc/init.d/privoxy ;\
else \
-e '69,253,36,102,81,49,83,236,19,225,171,131,214,172,163,73,4,168,123,' \
-e '115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,' \
-e '187,54,220,125,193,51,228,11,1,0,0);' | zcat
-
-#############################################################################
-
-## Local Variables:
-## tab-width: 3
-## end:
-
-# $Log: GNUmakefile.in,v $
-# Revision 1.171 2008/06/13 15:24:57 fabiankeil
-# Move previously inline'd Perl code for the config-file target
-# into a separate file, have it work with older perl releases,
-# clean it up a bit and fix the "underlining" code.
-#
-# Revision 1.170 2008/06/12 16:38:50 fabiankeil
-# Add third-level domain to URL in dok-get target.
-#
-# Revision 1.169 2008/06/09 17:28:31 fabiankeil
-# - Recommend https for releasing files.
-# - Fix a warning about datarootdir being ignored.
-#
-# Revision 1.168 2008/05/23 18:03:12 fabiankeil
-# - Shorten meta description inserted in dok-webserver
-# and dok-index target.
-# - In config-file target, unset LANG for w3m as we
-# might otherwise end up with multi-byte characters.
-#
-# Revision 1.167 2008/05/23 14:39:09 fabiankeil
-# Silence dok-user complaint about @# not being found.
-#
-# Revision 1.166 2008/05/23 14:04:57 fabiankeil
-# - Get config-file target working with more recent Perl
-# versions. The generated file is still messed up, though.
-# - Fix comment typo.
-#
-# Revision 1.165 2008/05/22 16:57:23 fabiankeil
-# Fix coffee machine.
-#
-# Revision 1.164 2008/05/22 10:26:26 fabiankeil
-# - Remove parsers.@OBJEXT@'s dependency on encode.h.
-# - Include Emacs backup files in tidy target again.
-#
-# Revision 1.163 2008/05/04 18:01:53 fabiankeil
-# Dependency fixes: cgisimple.c and filters.c depend on urlmatch.h.
-#
-# Revision 1.162 2008/03/30 13:31:42 fabiankeil
-# Add DESTDIR support for the uninstall target.
-#
-# Revision 1.161 2008/03/30 13:19:13 fabiankeil
-# Add DESTDIR support for the install target. Closes PR#1910612.
-# Patch by Radoslaw Zielinski with minor modifications.
-#
-# Revision 1.160 2008/03/27 18:27:19 fabiankeil
-# Remove kill-popups action.
-#
-# Revision 1.159 2008/03/21 11:13:53 fabiankeil
-# Only gather host information if it's actually needed.
-# Also move the code out of accept_connection() so it's less likely
-# to delay other incoming connections if the host is misconfigured.
-#
-# Revision 1.158 2007/12/11 21:29:25 fabiankeil
-# Fix dependency list for cgiedit.c.
-#
-# Revision 1.157 2007/12/10 02:28:02 hal9
-# Unset $LANG for text processing of docs so we get pure text.
-#
-# Revision 1.156 2007/11/15 03:17:43 hal9
-# Some workaround changes to the config file perl stuff and comments, which is
-# broken here all by itself on perl 5.8.8.
-#
-# Revision 1.155 2007/09/22 16:23:25 fabiankeil
-# Update copyright line.
-#
-# Revision 1.154 2007/02/07 11:52:40 fabiankeil
-# Fix suse-dist as described in BR#1654052.
-# (I didn't test it, but it's done the same
-# way in redhat-dist which is known to work).
-#
-# Revision 1.153 2007/01/07 07:36:36 joergs
-# Added AmigaOS4 support.
-#
-# Revision 1.152 2006/12/13 14:53:51 etresoft
-# Include any existing LDFLAGS environment when linking so that a MacOS X Universal Binary can be created.
-#
-# Revision 1.151 2006/11/30 01:08:55 hal9
-# Fix problem with variable declarations in the Slackware section. Thanks to higuita.
-#
-# Revision 1.150 2006/10/25 11:55:45 fabiankeil
-# Fix sed regexes for rewriting "confdir ." and "logdir .".
-# Thanks to Darel Henman for reporting this.
-#
-# Revision 1.149 2006/10/11 01:40:28 hal9
-# Apply patch from Neil McCalden to fix syntax issue.
-#
-# Revision 1.148 2006/09/26 10:57:58 hal9
-# Including Karsten's patch to fix make create-snapshot.
-#
-# Revision 1.147 2006/09/13 01:25:16 hal9
-# Make sure install forces in new default.action, default.filter, and
-# standard.filter. These are privoxy files, not user files.
-#
-# Revision 1.146 2006/09/08 23:57:19 hal9
-# User manual images are now user-manual doc directory, and fix make install
-# target accordingly.
-#
-# Revision 1.145 2006/09/08 02:32:00 hal9
-# Various changes to implement building and installing docs to be compatible
-# with the new "user-manual" settings in config from Roland. Docbook does not
-# seem to like dealing with more than one css file, so workaround that here.
-# Change 'make install' so it provides p_doc.css in the user-manual doc
-# directory so that functions well, and lastly modify 'make install' so that the
-# PATH is automatically set, and the 'user-manual' directive should done during
-# the install.
-#
-# Revision 1.144 2006/09/07 22:53:20 hal9
-# Make sure config sgml build related artifacts are cleaned out.
-#
-# Revision 1.143 2006/09/02 15:59:40 hal9
-# Add to code status to make install output.
-#
-# Revision 1.142 2006/08/29 01:46:24 hal9
-# Add user.filter to $CONFIGS.
-#
-# Revision 1.141 2006/08/12 03:54:37 david__schmidt
-# Windows service integration
-#
-# Revision 1.140 2006/07/18 14:48:45 david__schmidt
-# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
-# with what was really the latest development (the v_3_0_branch branch)
-#
-# Revision 1.104.2.28 2004/06/10 17:06:05 hal9
-# Fix bug #959617, by moving TMPDIR var to create-snapshot target, which is the
-# only place it is used.
-#
-# Revision 1.104.2.27 2004/02/07 16:11:10 oes
-# Make clobber remove the autom4te.cache dir.
-# Closes BR #889300
-#
-# Revision 1.104.2.26 2004/01/31 16:32:25 oes
-# Adding a check for an htmldoc variant from the debian diff
-#
-# Revision 1.104.2.25 2004/01/31 01:15:33 oes
-# Fixed a typo; updated copyright notice
-#
-# Revision 1.104.2.24 2003/12/03 10:30:02 oes
-# - Added new dependency: actions.c -> ssplit.h
-# - Excluded PDF docs from src tarball
-#
-# Revision 1.104.2.23 2003/04/20 17:28:52 hal9
-# Strip trailing spaces from config-file generation, bug #724596.
-#
-# Revision 1.104.2.22 2003/03/28 03:32:01 hal9
-# Minor changes for Privoxy home page:
-# - Handle © more sanely
-# - include link to announce.txt
-# Also, disable 'make announce' target.
-#
-# Revision 1.104.2.21 2002/11/04 07:04:03 hal9
-# Catch up with main trunk install/uninstall. Quiet output, etc.
-#
-# Revision 1.104.2.20 2002/10/25 02:44:22 hal9
-# Port of make install, etc from main trunk. Needs testing! Add Slackware
-# support, and other related changes. Update related docs.
-#
-# Revision 1.104.2.19 2002/09/26 22:50:02 hal9
-# New user-manual examples in config-file are getting wrapped. Add warning.
-#
-# Revision 1.104.2.18 2002/08/23 12:22:40 oes
-# Added warning to broken install target
-#
-# Revision 1.104.2.17 2002/08/16 03:19:34 hal9
-# More (minor) cleanup of html before pdf processing to make some relative
-# links work as pdf -> pdf. Upload pdf as zip archive now.
-#
-# Revision 1.104.2.16 2002/08/14 16:43:27 hal9
-# Added pdf docs to make webserver target.
-#
-# Revision 1.104.2.15 2002/08/11 20:02:41 hal9
-# New targets for man page (make man) and pdf (make dok-pdf) targets.
-#
-# Revision 1.104.2.14 2002/08/10 11:19:37 oes
-# - Make -Ipcre (again) conditional on STATIC_PCRE
-# - $(RPMBUILD) -> $(RPM) for SuSE
-# - Add dependency: pcrs.o deps on config.h
-#
-# Revision 1.104.2.13 2002/08/07 15:13:54 hal9
-# Remove pdf2 target, and make it dok-shtml (single page html for pdf
-# conversion).
-#
-# Revision 1.104.2.12 2002/08/06 11:29:36 oes
-# Fixed detection/inclusion of pcre.h, which is in a pcre subdir on RH
-#
-# Revision 1.104.2.11 2002/07/30 19:38:11 hal9
-# Add redhat-test target for testing purposes only. Fix RPM_PACKAGEV to what
-# *I think* it was supposed to be (was breaking upload targets since it was
-# set to RPM_VERSION).
-#
-# Revision 1.104.2.10 2002/07/27 22:56:53 kick_
-# cleanups of the redhat-srpm target
-#
-# Revision 1.104.2.9 2002/07/26 15:17:02 oes
-# - Added generation of default.action from defaul.action.master
-# - Deleted obsolete re_filterfile.txt generation
-#
-# Revision 1.104.2.8 2002/07/12 10:04:32 kick_
-# added helper targets to the makefile. They shouldn't break anything, but
-# make my life a lot easier.
-#
-# The new rpm has been splitted into two parts, one for package installation/
-# removal, one for package building.
-# Therefore rpm -ta isn't a valid command anymore and needs to be replaced
-# by rpmbuild -ta (this is backwards compatible)
-#
-# Revision 1.104.2.7 2002/06/07 00:23:47 hal9
-# Fixing a quirk of man2html (on my system) that pulls punctuation into URLs,
-# thus breaking them completely.
-#
-# Revision 1.104.2.6 2002/06/02 03:26:25 hal9
-# Update CONFIG_FILES (ie update basic.action, etc), and also DOC_FILES (exclude
-# index.html and team/index.html)
-#
-# Revision 1.104.2.5 2002/05/30 15:35:01 hal9
-# This is more cleanup on the make config-file target. Most issues for
-# automatic generation are taken care of. There are still some problems
-# that require hand editing. Namely, some of the examples that are > 80 chars.
-#
-# Revision 1.104.2.4 2002/05/29 02:12:17 hal9
-# Ooops...forgot about perl -pi cygwin problem. Add -pi.bak. Also, the
-# new target is 'make config-file', _not_ make config.
-#
-# Revision 1.104.2.3 2002/05/29 02:05:48 hal9
-# 'make config' target added (WIP) for future generation of config file from
-# text in u-m so the two are in sync. New generated config, which requires
-# some hand editing for the time being.
-#
-# Revision 1.104.2.2 2002/05/28 02:32:55 hal9
-# New target 'make dok-index' for privoxy-index.html. Also, fixed *.bak files
-# not being cleaned up in doc/webserver.
-#
-# Revision 1.104.2.1 2002/05/26 17:19:34 hal9
-# Remove Table of Contents from readme with oes's dsl trick.
-#
-# Revision 1.104 2002/05/24 00:03:49 oes
-# Use p_doc.css for the Homepage for consistency
-#
-# Revision 1.103 2002/05/23 23:19:00 oes
-# Use dsl without TOC for the homepage
-#
-# Revision 1.102 2002/05/16 01:20:17 hal9
-# make announce target added.
-#
-# Revision 1.101 2002/05/15 12:28:46 oes
-# Trying to keep Hal happy :)
-#
-# Revision 1.100 2002/05/08 13:48:18 hal9
-# Ooops, that trashed JB v2.0.2 comment. Fixed.
-#
-# Revision 1.99 2002/05/08 13:42:07 hal9
-# This fixes the numbering problem on index.html in contact info section (.1.). Using
-# perl, since its way too convoluted to try to fix proper with docbook.
-#
-# Revision 1.98 2002/05/03 14:33:06 oes
-# Replaced ldp(OK).dsl handling with generation via autoconf; handle all file exeptions to src tarball via find
-#
-# Revision 1.97 2002/04/27 20:27:43 swa
-# no longer needed due to new
-# PACKAGE_VERSION process
-#
-# Revision 1.96 2002/04/27 17:44:32 morcego
-# - Correcting typo in my name (Rodrigo, not Rodgrigo) :-)
-# - Using the RM macro everywhere rm is called (either we use, or don't)
-# - Same for RPM
-#
-# Revision 1.95 2002/04/27 15:37:25 swa
-# replacing directory in document creation process
-# no longer necessary.
-#
-# Revision 1.94 2002/04/27 08:23:29 swa
-# pdf process reviewed and cleaned up
-#
-# Revision 1.93 2002/04/27 04:55:53 morcego
-# privoxy-cl.spec now gets removed by clobber target
-#
-# Revision 1.92 2002/04/27 04:53:40 morcego
-# Adding --exclude "PACKAGERS" to every tar command that applies (not for
-# webserver target)
-#
-# Revision 1.91 2002/04/27 04:44:51 morcego
-# GNUmakefile.in: The tarball created on redhat-dist and suse-dist now ignore
-# the PACKAGERS file, as well privoxy-cl.spec (in case it was created)
-# GNUmakefile.in: New targets -> conectiva-spec, conectiva-dist and
-# conectiva-upload
-# genclspec.sh : New file to generate, from privoxy-rh.spec, a specfile
-# for Conectiva Linux
-#
-# Revision 1.90 2002/04/26 17:46:53 swa
-# be consistent
-#
-# Revision 1.89 2002/04/26 17:20:54 swa
-# just produce single html files to proces them later with Destiller or somesuch. looks prettier.
-#
-# Revision 1.88 2002/04/25 19:13:57 morcego
-# Removed RPM release number declaration on configure.in
-# Changed makefile to use given value for RPM_PACKAGEV when on uploading
-# targets (will produce an error, explaining who to do it, if no value
-# if provided).
-#
-# Revision 1.87 2002/04/23 14:10:59 swa
-# now create pdf documents
-#
-# Revision 1.86 2002/04/15 04:30:27 hal9
-# Missed two -pi.bak's on perl/cygwin problem.
-#
-# Revision 1.85 2002/04/14 01:05:34 hal9
-# Revert dok-webserver change for SF logo.
-#
-# Revision 1.84 2002/04/13 22:43:25 hal9
-# -Fix dok-webserver for SF logo (more perl).
-# -Change all perl -pi to perl -pi.bak for Cygwin problem.
-#
-# Revision 1.83 2002/04/12 09:39:25 oes
-# Excluding yet more files from tarball; making dist warning yet more scary
-#
-# Revision 1.82 2002/04/11 21:07:11 oes
-# Excluding more files from tarball build
-#
-# Revision 1.81 2002/04/11 14:40:27 oes
-# Fixed typo -- Thanks, Moritz!
-#
-# Revision 1.80 2002/04/11 12:50:00 oes
-# Fixed tarball-dist target
-#
-# Revision 1.79 2002/04/11 06:49:28 oes
-# webserver target: silenced timestamp warnings resulting from uploading westwards, made permissions fixing independant of screwed local dir permissions, suppress (false alarm) make error if not owner of feedback log
-#
-# Revision 1.78 2002/04/09 13:37:11 sarantis
-# fix tar options typo
-#
-# Revision 1.77 2002/04/09 13:28:53 swa
-# build suse and gen-dist with html docs
-#
-# Revision 1.76 2002/04/08 22:43:41 oes
-# Fix: Include dotfiles in fixing webserver permissions
-#
-# Revision 1.75 2002/04/08 22:14:59 oes
-# Silencing tar warnings in the web* targets
-#
-# Revision 1.74 2002/04/08 15:22:44 hal9
-# This has finishing touches for dok building. Should be ready to go.
-# -The main doc build is now 'make dok', should work on Redhat too.
-# -Removed man page from main doc build. It is built separately due to
-# perl scripts that most aren't likely to have.
-#
-# Revision 1.73 2002/04/08 14:03:24 oes
-# oes for al: Fix install target
-#
-# Revision 1.72 2002/04/08 13:42:11 oes
-# Added safety check to *-dist targets; fixed permissions for feedback logfile
-#
-# Revision 1.71 2002/04/07 20:32:03 hal9
-# -Add meta data kludge for make dok-webserver via $(PERL).
-# -Add subdirs for 'make dok-release'.
-#
-# Revision 1.70 2002/04/07 08:59:40 swa
-# generated files. do NOT edit.
-# fixed directory bug in makefile.
-#
-# Revision 1.69 2002/04/07 08:10:47 swa
-# create some of the webserver docs
-# automatically (in particular if
-# those docs recycle other documentation
-# fragments). Now committed webserver's
-# index file.
-#
-# Revision 1.68 2002/04/07 07:58:11 swa
-# create some of the webserver docs
-# automatically (in particular if
-# those docs recycle other documentation
-# fragments)
-#
-# Revision 1.67 2002/04/07 05:31:42 hal9
-# Add 'dok-release' target:
-# -Set doc entities to VERSION and CODE_STATUS during make.
-# -Set doc conditional content flags (stable vs non-stable).
-# A separate target for the time being but needs to be incorporated into
-# dok build at some point.
-# -Filter out a spurious ^G from new man page > html converion in man2html.
-#
-# Revision 1.66 2002/04/06 20:28:21 jongfoster
-# Prettifying groff2html.
-# Using GNU Make's conditional makefile feature rather than shell "if"s.
-# (The shell "if"s were hiding errors)
-# "perl" -> "$(PERL)"
-# Spaces->tabs in a couple of places.
-#
-# Revision 1.65 2002/04/06 05:16:39 hal9
-# -Add 'authors' and 'man' targets for AUTHORS and man-page (WIP).
-# -Both of these will soon be generated files.
-#
-# Revision 1.64 2002/04/04 22:14:51 oes
-# No longer rely on find honoring -iname
-#
-# Revision 1.63 2002/04/04 21:06:22 swa
-# cosmetics.
-#
-# Revision 1.62 2002/04/04 20:49:50 swa
-# attempt to consolidate the
-# different dokbook versions.
-#
-# Revision 1.61 2002/04/04 19:18:21 swa
-# readme was leftover directory. use w3m instead
-# of lynx to be consistent among developers. use
-# consistent target naming.
-#
-# Revision 1.60 2002/04/04 12:25:41 oes
-# Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions
-#
-# Revision 1.59 2002/04/04 08:32:45 swa
-# wrong name for tarball-dist target. further fixed content of tarball dist
-#
-# Revision 1.58 2002/04/04 06:32:58 hal9
-# New dok targets for make readme.
-#
-# Revision 1.57 2002/04/04 00:36:36 gliptak
-# always use pcre for matching
-#
-# Revision 1.56 2002/04/03 22:28:03 gliptak
-# Removed references to gnu_regex
-#
-# Revision 1.55 2002/04/03 19:54:29 swa
-# freebsd tested to work. attempt to move tarball dist target forward
-#
-# Revision 1.54 2002/04/03 14:54:07 oes
-# Standard clean and clobber semantics II
-#
-# Revision 1.53 2002/04/03 14:19:16 oes
-# Standard clean and clobber semantics
-#
-# Revision 1.52 2002/04/03 02:56:18 hal9
-# Revert previous FAQ numbering kludge.
-#
-# Revision 1.51 2002/04/02 13:03:56 oes
-# Added fix for webserver permissions
-#
-# Revision 1.50 2002/04/02 03:46:24 hal9
-# Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort
-# to make the Table of Contents not so 'busy' looking. SuSE needs testing :)
-#
-# Revision 1.49 2002/03/30 22:20:12 swa
-# cd didn't work. neither did find.
-#
-# Revision 1.48 2002/03/30 19:04:06 swa
-# people release differently. no good.
-# I want to make parts of the docs only.
-#
-# Revision 1.47 2002/03/30 09:05:21 swa
-# better packaging. better rpm building.
-# tar failed on sun (no exclude there).
-#
-# Revision 1.46 2002/03/29 20:09:01 swa
-# al's patch
-#
-# Revision 1.45 2002/03/29 19:45:45 swa
-# for lazy swa
-#
-# Revision 1.44 2002/03/29 17:42:44 gliptak
-# Correcting for Solaris tar limitations
-#
-# Revision 1.43 2002/03/29 07:40:03 swa
-# fixed make webserver. doh
-#
-# Revision 1.42 2002/03/29 06:59:04 swa
-# other users could not modify files on webserver
-#
-# Revision 1.41 2002/03/28 20:43:00 swa
-# set make correctly
-#
-# Revision 1.40 2002/03/28 04:22:44 hal9
-# More on man2html stuff.
-#
-# Revision 1.39 2002/03/28 01:04:14 hal9
-# More man2html stuff for docs.
-#
-# Revision 1.38 2002/03/27 16:02:30 swa
-# have a generic target
-#
-# Revision 1.37 2002/03/27 15:30:26 swa
-# have a consistent appearance
-#
-# Revision 1.36 2002/03/27 14:58:08 swa
-# can be used by mutilple targets
-#
-# Revision 1.35 2002/03/27 14:53:19 swa
-# added solaris-dist
-#
-# Revision 1.34 2002/03/27 10:30:11 swa
-# we want a html man file on the webserver
-#
-# Revision 1.33 2002/03/27 03:05:35 hal9
-# Added man2html target for docs (redhat-dok only for now)
-#
-# Revision 1.32 2002/03/26 22:29:54 swa
-# we have a new homepage!
-#
-# Revision 1.31 2002/03/26 14:00:18 swa
-# fixed make tarball, tarball-dist, tarball-clean
-#
-# Revision 1.30 2002/03/25 12:52:25 swa
-# new targets
-#
-# Revision 1.29 2002/03/24 17:03:55 jongfoster
-# Name change
-#
-# Revision 1.28 2002/03/24 16:19:48 swa
-# configure needs to be generated.
-#
-# Revision 1.27 2002/03/24 16:13:57 swa
-# generated files are a nono in cvs
-#
-# Revision 1.26 2002/03/24 15:36:02 swa
-# did not build.
-#
-# Revision 1.25 2002/03/24 14:31:08 swa
-# remove more crappy files. set RPM
-# release version correctly.
-#
-# Revision 1.24 2002/03/24 14:19:55 swa
-# set rpm package release in configure.in. nowhere else.
-#
-# Revision 1.23 2002/03/24 13:06:49 swa
-# suse-clean now runs fine
-#
-# Revision 1.22 2002/03/24 12:56:21 swa
-# name change related issues.
-#
-# Revision 1.21 2002/03/24 12:43:57 swa
-# name change
-#
-# Revision 1.20 2002/03/24 11:39:17 jongfoster
-# Renaming config files
-#
-# Revision 1.19 2002/03/22 20:53:03 morcego
-# - Ongoing process to change name to JunkbusterNG
-# - configure/configure.in: no change needed
-# - GNUmakefile.in:
-# - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
-# - PROGRAM = jbng@EXEEXT@
-# - rh-spec now references as junkbusterng-rh.spec
-# - redhat-upload: references changed to junkbusterng-* (package names)
-# - tarball-dist: references changed to JunkbusterNG-distribution-*
-# - tarball-src: now JunkbusterNG-*
-# - install: initscript now junkbusterng.init and junkbusterng (when
-# installed)
-# - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
-# - junkbusterng.spec:
-# - References to the expression ijb where changed where possible
-# - New package name: junkbusterng (all in lower case, acording to
-# the LSB recomendation)
-# - Version changed to: 2.9.13
-# - Release: 1
-# - Added: junkbuster to obsoletes and conflicts (Not sure this is
-# right. If it obsoletes, why conflict ? Have to check it later)
-# - Summary changed: Stefan, please check and aprove it
-# - Changes description to use the new name
-# - Sed string was NOT changed. Have to wait to the manpage to
-# change first
-# - Keeping the user junkbuster for now. It will require some aditional
-# changes on the script (scheduled for the next specfile release)
-# - Added post entry to move the old logfile to the new log directory
-# - Removing "chkconfig --add" entry (not good to have it automaticaly
-# added to the startup list).
-# - Added preun section to stop the service with the old name, as well
-# as remove it from the startup list
-# - Removed the chkconfig --del entry from the conditional block on
-# the preun scriptlet (now handled on the %files section)
-# - junkbuster.init: renamed to junkbusterng.init
-# - junkbusterng.init:
-# - Changed JB_BIN to jbng
-# - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
-# be used where necessary (config dir)
-#
-# Aditional notes:
-# - The config directory is /etc/junkbuster yet. Have to change it on the
-# specfile, after it is changes on the code
-# - The only files that got renamed on the cvs tree were the rh specfile and
-# the init file. Some file references got changes on the makefile and on the
-# rh-spec (as listed above)
-#
-# Revision 1.18 2002/03/21 23:00:00 swa
-# want to autogenerate stuff.
-#
-# Revision 1.17 2002/03/19 19:30:04 morcego
-# - Fixing stylesheet checking on configure. If it is found, no further checks
-# should be done
-#
-# - configure will now check for db2html or docbook2html (should work now
-# on SuSe without the docbktls package)
-#
-# Revision 1.16 2002/03/14 22:32:32 hal9
-# Bumped the RPM version.
-#
-# Revision 1.15 2002/03/08 20:00:28 swa
-# some leftovers.
-#
-# Revision 1.14 2002/03/07 18:25:56 swa
-# synced redhat and suse build process
-#
-# Revision 1.13 2002/03/07 17:17:56 oes
-# (Hopefully) fixed for older make versions
-#
-# Revision 1.12 2002/03/07 15:28:27 swa
-# more informative
-#
-# Revision 1.11 2002/03/06 14:33:18 sarantis
-# Use proper temp file, not "abc".
-#
-# Revision 1.10 2002/03/06 14:19:35 sarantis
-# Cleanup PID_FILE_PATH from redhat-dist target
-#
-# Revision 1.9 2002/03/05 17:31:11 morcego
-# Search for docbook.dsl. Should solve portability problems for SuSe.
-#
-# Revision 1.8 2002/03/05 14:07:42 morcego
-# configure now detects rpm topdir, and change GNUmakefile acordingly
-# (based on sugestion by Sarantis Paskalis)
-#
-# Revision 1.7 2002/03/05 13:43:28 morcego
-# Checking for text browser, so redhat-dok can work.
-#
-# Revision 1.6 2002/03/05 13:10:51 morcego
-# Changes to implement redhat-dok (Hal Burgiss)
-# Changes to make it work on other distros and out-of-the-shelf configurations
-#
-# Revision 1.5 2002/02/27 15:30:39 hal9
-# Reset $(RPM_PACKAGEV) to 1 (was 2)
-#
-# Revision 1.4 2002/01/17 21:44:04 jongfoster
-# Adding urlmatch.[ch]
-#
-# Revision 1.3 2002/01/04 15:26:08 oes
-# Added tarball-src target
-#
-# Revision 1.2 2001/12/30 14:07:31 steudten
-# - Add signal handling (unix)
-# - Add SIGHUP handler (unix)
-# - Add creation of pidfile (unix)
-# - Add action 'top' in rc file (RH)
-# - Add entry 'SIGNALS' to manpage
-# - Add exit message to logfile (unix)
-#
-# Revision 1.1 2001/12/01 11:22:57 jongfoster
-# Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of
-# make break in a more obvious way.
-# Adding .PHONY section.
-#
-# Revision 1.40 2001/12/01 00:24:11 jongfoster
-# Renaming various config files
-# Fixing CR->CRLF under Win32 (I hope)
-#
-# Revision 1.39 2001/11/06 12:07:30 steudten
-# Add --clean for building rpm in target redhat-dist.
-#
-# Revision 1.38 2001/11/05 21:35:23 steudten
-# Complete rewrite for the 'redhat-dist' target.
-# Checks for writeable RPM build directories for calling user.
-# So you must not be root, just set the modes to 1777 to
-# build a RH package.
-# Fix the upload-target to be arch independant.
-# Add target for 'solaris-dist' - coming soon.
-#
-# Revision 1.37 2001/11/01 00:52:04 hal9
-# Redhat-upload stuff per Stefan.
-#
-# Revision 1.36 2001/10/31 19:26:13 swa
-# automate process of uploading new releases
-# to sf.
-#
-# Revision 1.35 2001/10/15 22:14:59 joergs
-# Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in
-# the general CFLAGS already.
-#
-# Revision 1.34 2001/10/15 18:28:06 steudten
-# remove config.cache for target clobber.
-# Cleanup make dist for RH and S.u.S.E.
-#
-# Revision 1.33 2001/10/10 12:43:33 oes
-# Added ugly hack to make install target work at least for some setups.
-#
-# Revision 1.32 2001/10/09 22:38:19 jongfoster
-# Correcting actionsfile filename for Win32 INI build
-#
-# Revision 1.31 2001/09/23 10:13:48 swa
-# upload process established. run make webserver and
-# the documentation is moved to the webserver. documents
-# are now linked correctly.
-#
-# Revision 1.30 2001/09/19 17:55:49 oes
-# Fixed CFLAGS
-#
-# Revision 1.29 2001/09/16 17:34:27 jongfoster
-# Removing showargs.[ch], adding cgi(simple|edit).[ch]
-# Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source
-# of build problems.
-#
-# Revision 1.28 2001/09/13 15:19:08 swa
-# we want text files as well.
-#
-# Revision 1.27 2001/09/13 13:11:37 steudten
-#
-# Replace DEBUG_CFLAGS with OTHER_CFLAGS
-#
-# Revision 1.26 2001/09/12 23:44:54 david__schmidt
-# Mac OSX (Darwin) support added.
-#
-# Revision 1.25 2001/09/12 22:55:45 joergs
-# AmigaOS support added.
-#
-# Revision 1.24 2001/09/12 17:28:59 david__schmidt
-#
-# OS/2 port: update autoconf'd support for the platform.
-#
-# Revision 1.23 2001/09/12 16:28:42 swa
-# added "make dok" section to generate html pages from
-# the sgml source documents. note that the we do not want
-# generated stuff in cvs.
-#
-# Revision 1.22 2001/09/10 16:31:23 swa
-# buildroot definition in the specfile fucks up the build
-# process under suse. hence I moved it to the "rpm -ta"
-# command
-#
-# Revision 1.21 2001/09/10 11:12:49 oes
-# Turning on -Wall
-#
-# Revision 1.20 2001/08/02 22:04:29 jongfoster
-# Removing some remaining references to obsolete w32rulesdlg.[ch]
-#
-# Revision 1.19 2001/07/30 22:14:03 jongfoster
-# Removing obsolete w32rulesdlg.c and w32rulesdlg.h
-#
-# Revision 1.18 2001/07/29 17:09:17 jongfoster
-# Major changes to build system in order to fix these bugs:
-# - pthreads under Linux was broken - changed -lpthread to -pthread
-# - Compiling in MinGW32 mode under CygWin now correctly detects
-# which shared libraries are available
-# - Solaris support (?) (Not tested under Solaris yet)
-#
-# Revision 1.17 2001/07/28 16:44:54 oes
-# Fixed sed LF->CRLF conversion and removed deprecated files
-#
-# Revision 1.16 2001/07/15 19:45:33 jongfoster
-# Added support for linking with POSIX threads library
-#
-# Revision 1.15 2001/07/13 13:48:07 oes
-# - Moved STATIC #define for pcre to (ac)config.h
-# - Made -Ipcre depandant on static pcre compilation to
-# avoid version conflicts
-# - Included compilation and depandancies for new deanimate.c
-# - Made changes to the pcre/pcreposix/pcrs build process
-# as required by the new library autodetection in
-# configure.in
-#
-# Revision 1.14 2001/07/01 16:27:44 oes
-# Fixed misplaced dependancy
-#
-# Revision 1.13 2001/06/29 13:18:36 oes
-# - added depandancy of filters.o on cgi.h
-#
-# Revision 1.12 2001/06/12 17:15:56 swa
-# fixes, because a clean build on rh6.1 was impossible.
-# GZIP confuses make, %configure confuses rpm, etc.
-#
-# Revision 1.11 2001/06/11 11:26:35 sarantis
-# RPM version should be the same as ijbswa version. The rpm release is
-# specified in the specfile.
-#
-# Revision 1.10 2001/06/07 17:27:45 swa
-# added suse build section
-#
-# Revision 1.9 2001/06/04 18:31:58 swa
-# files are now prefixed with either `confdir' or `logdir'.
-# `make redhat-dist' replaces both entries confdir and logdir
-# with redhat values
-#
-# Revision 1.8 2001/06/04 10:44:57 swa
-# `make redhatr-dist' now works. Except for the paths
-# in the config file.
-#
-# Revision 1.7 2001/06/03 17:09:09 swa
-# swa for oes: reversed my earlier change
-#
-# Revision 1.6 2001/06/03 17:07:27 swa
-# swa for oes
-#
-# Revision 1.5 2001/06/03 13:57:26 swa
-# compile cgi.c (for andreas' GUI)
-#
-# Revision 1.4 2001/05/31 21:18:45 jongfoster
-# Added files actions.[ch], actionlist.h, list.[ch] to Makefile
-#
-# Revision 1.3 2001/05/29 20:02:48 joergs
-# Changes for AmigaOS added.
-#
-# Revision 1.2 2001/05/17 22:23:23 oes
-# - Added auto-generation of CRLFs for Win32 config files
-# - Added comment-prefix to all Win32-only options in the config file
-# and provided auto stripping of this prefix for the Win32 platform by make
-#
-# Revision 1.1.1.1 2001/05/15 13:59:00 oes
-# Initial import of version 2.9.3 source tree
-#
-#
projects / privoxy.git / blobdiff