# Note: Makefile is built automatically from Makefile.in
#
-# $Id: GNUmakefile.in,v 1.19 2002/03/22 20:53:03 morcego Exp $
+# $Id: GNUmakefile.in,v 1.63 2002/04/04 21:06:22 swa Exp $
#
# Written by and Copyright (C) 2001 the SourceForge
-# IJBSWA team. http://ijbswa.sourceforge.net
+# Privoxy team. http://www.privoxy.org/
#
# Based on the Internet Junkbuster originally written
# by and Copyright (C) 1997 Anonymous Coders and
# or write to the Free Software Foundation, Inc., 59
# Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
+
+#############################################################################
+# Set make command correctly
+#############################################################################
+@SET_MAKE@
+
+#############################################################################
+# Version number (for RPM)
+#############################################################################
+
+VERSION_MAJOR = @VERSION_MAJOR@
+VERSION_MINOR = @VERSION_MINOR@
+VERSION_POINT = @VERSION_POINT@
+CODE_STATUS = @CODE_STATUS@
+VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
+# will automatically be postfixed with -$(RPM_PACKAGEV) in the SPECfile
+RPM_VERSION = $(VERSION)
+RPM_PACKAGEV = @VERSION_RPM_PACKAGE@
+
+
+#############################################################################
+# Directories for "make install"
+#############################################################################
+
+DEST = @prefix@
+CONFDEST = @prefix@@sysconfdir@
+SBIN_DEST = @prefix@@sbindir@
+MAN_DEST = @prefix@@mandir@
+
+
+#############################################################################
+# Build tools
+#############################################################################
+
+PROGRAM = privoxy@EXEEXT@
+CC = @CC@
+ECHO = echo
+GZIP_PROG = gzip
+#INSTALL = cp -f
+INSTALL = @INSTALL@
+INSTALL_P = -m 0750 -g @GROUP@ -o @USER@ -b
+INSTALL_T = -m 0640 -g @GROUP@ -o @USER@ -b
+INSTALL_D = -m 0750 -g @GROUP@ -o @USER@ -d
+LD = @CC@
+RM = rm -f
+STRIP_PROG = strip
+SED = sed
+CAT = cat
+RPM = rpm
+MV = mv
+TAR = tar
+LN = ln
+WDUMP = @WDUMP@ -dump
+JADECAT = @JADECAT@
+JADEBIN = @JADEBIN@
+DB = $(JADEBIN) $(JADECAT) -t sgml -ihtml -D.. -d ldpOK.dsl\#html
+DB2HTML = @DB2HTML@
+DKPREFIX = @DKPREFIX@
+MAN2HTML = @MAN2HTML@
+G2H_CMD = groff -mandoc -Thtml
+TARGET_OS = @host@
+
+#User Group paras
+USER = @USER@
+GROUP = @GROUP@
+
+# Program to do LF->CRLF
+#
+# The sed version should be the most portable, but it doesn't for for me,
+# the other two do. FIXME.
+# - Jon
+#DOSFILTER = $(SED) -e $$'s,$$,\r,'
+#DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
+DOSFILTER = perl -p -e 's/\n/\r\n/'
+
+#############################################################################
+# Setup for make distribution rh and suse for now
+#############################################################################
+
+TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz
+RPM_BASE = @RPM_BASE@
+
+#############################################################################
+# We include these files in our distributions
+#############################################################################
+# take care that no CVS .cvsignore or other crappy files
+# are included here
+# and escape every '#' in the find. doh.
+CONFIG_FILES = config trust \
+ default.action \
+ basic.action intermediate.action advanced.action \
+ default.filter \
+ `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
+
+DOC_FILES = AUTHORS LICENSE README ChangeLog \
+ `find doc/text/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` privoxy.1
+
+#############################################################################
+# Filenames and libraries
+#############################################################################
+
+C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \
+ errlog.c filters.c gateway.c jbsockets.c jcc.c killpopup.c \
+ list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \
+ urlmatch.c
+
+C_OBJS = $(C_SRC:.c=.@OBJEXT@)
+C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h
+
+W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c
+W32_FILES = @WIN_ONLY@w32.res
+W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES)
+W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h
+W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32
+W32_INIS = @WIN_ONLY@config.txt trust.txt
+
+PCRS_SRC = @STATIC_PCRS_ONLY@pcrs.c
+PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@)
+PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h)
+
+PCRE_SRC = @STATIC_PCRE_ONLY@pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c
+PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:.c=.@OBJEXT@)
+PCRE_HDRS = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h
+
+# No REGEX (maybe because dynamically linked pcreposix):
+REGEX_SRC =
+@STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c
+
+REGEX_OBJS = $(REGEX_SRC:.c=.@OBJEXT@)
+REGEX_HDRS = $(REGEX_SRC:.c=.h)
+
+# Dependencies introduced by #include "project.h".
+PROJECT_H_DEPS = project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@pcre/pcre.h
+
+# Socket libraries for platforms that need them explicitly defined
+SOCKET_LIB = @SOCKET_LIB@
+
+# PThreads library, if needed.
+PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@
+
+SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC)
+OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS)
+HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS)
+LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB)
+
+
+#############################################################################
+# Compiler switches
+#############################################################################
+
+# The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build.
+# The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a
+# Win32 GUI build.
+# The flag "-pthread" is required if using Pthreads under Linux (and
+# possibly other OSs).
+SPECIAL_CFLAGS = @SPECIAL_CFLAGS@
+
+# Add your flags here
+OTHER_CFLAGS =
+
+CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
+ @STATIC_PCRE_ONLY@ -Ipcre
+
+LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
+
+
+#############################################################################
+# Build section.
+#
+# There should NOT be any targets above this line.
+#############################################################################
+all: $(PROGRAM)
+
+
+#############################################################################
+# Phony targets
+#############################################################################
+.PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \
+suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
+install
+
+
+#############################################################################
+# Define this explicitly because Solaris is broken!
+#############################################################################
+%.o: %.c
+ $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
+
+
+#############################################################################
+# Win32 config files
+#############################################################################
+
+inifiles: $(W32_INIS)
+
+config.txt: config
+ $(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
+ -e 's!\jarfile jarfile!jarfile jar.log!' \
+ -e 's!\logfile logfile!logfile privoxy.log!' \
+ -e 's!#Win32-only: !!' \
+ < $< | \
+ $(DOSFILTER) > $@
+ # LF to CRLF in default.action
+ $(DOSFILTER) <default.action >default.action.txt && mv default.action.txt default.action
+ # LF to CRLF in default.filter
+ $(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
+
+trust.txt: trust
+ $(DOSFILTER) < $< > $@
+
+re_filterfile.txt: re_filterfile
+ $(DOSFILTER) < $< > $@
+
+#############################################################################
+# RPM specifice stuff (SuSE or Redhat, ..)
+#############################################################################
+rpm-stuff: clean clobber
+ for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
+ if [ ! -w $(RPM_BASE)/$$dir ]; then \
+ $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
+ $(ECHO) "Or add a suitable path to .rpmmacros like."; \
+ $(ECHO) "%_topdir /home/foo/rpm-build"; \
+ exit 1; \
+ fi; \
+ done; \
+
+#############################################################################
+# redhat distribution alpha and x86
+#############################################################################
+redhat-dist: rpm-stuff
+ TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
+ if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
+ -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
+ privoxy-rh.spec > $$TMPFILE ; then \
+ $(MV) -f $$TMPFILE privoxy-rh.spec; \
+ else \
+ $(ECHO) "Could not set version info in specfile."; \
+ exit 1;\
+ fi
+
+ $(TAR) --exclude "CVS" --exclude "privoxy-suse.spec" -czf $(TAR_ARCH) .
+ $(RPM) --clean -ta $(TAR_ARCH)
+ if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
+
+# anonymously ncftps the rpms to sourceforge
+redhat-upload:
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
+# better should use `arch` here instead of ix86 to support other platforms too
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
+ @$(ECHO) -------------------------------------------------------
+ @$(ECHO) Now goto
+ @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) ... and release the files.
+ @$(ECHO) -------------------------------------------------------
+ # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+
+#############################################################################
+# suse distribution. works fine. no need to be root.
+#############################################################################
+suse-dist: rpm-stuff
+ TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
+ if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
+ -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
+ privoxy-suse.spec > $$TMPFILE ; then \
+ $(MV) -f $$TMPFILE privoxy-suse.spec; \
+ else \
+ $(ECHO) "Could not set version info in specfile."; \
+ exit 1;\
+ fi
+
+ $(TAR) --exclude "CVS" --exclude "privoxy-rh.spec" -czf $(TAR_ARCH) .
+ $(RPM) --clean -ta $(TAR_ARCH)
+ if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
+
+# anonymously ncftps the rpms to sourceforge
+suse-upload:
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
+# better should use `arch` here instead of ix86 to support other platforms too
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
+ @$(ECHO) -------------------------------------------------------
+ @$(ECHO) Now goto
+ @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) ... and release the files.
+ @$(ECHO) -------------------------------------------------------
+
+# handle with care. use with root.
+suse-clean:
+ rpm -e junkbuster-suse || true
+ rm -rf /etc/junkbuster
+ rm -rf /etc/rc.d/junkbuster*
+ rm -rf /var/run/junkbuster.pid
+ rm -rf /var/log/junkbuster
+ rm -f /etc/init.d/junkbuster
+ rm -f /usr/sbin/junkbuster
+ rm -f /usr/sbin/rcjunkbuster
+ rm -f /usr/share/man/man1/junkbuster.1.gz
+ rpm -e privoxy-suse || true
+ rm -rf /etc/privoxy
+ rm -rf /etc/rc.d/privoxy*
+ rm -rf /var/run/privoxy.pid
+ rm -rf /var/log/privoxy
+ rm -f /etc/init.d/privoxy
+ rm -f /usr/sbin/privoxy
+ rm -f /usr/sbin/rcprivoxy
+ rm -f /usr/share/man/man1/privoxy.1.gz
+
+#############################################################################
+# generic distribution
+#############################################################################
+gen-dist:
+ @$(ECHO) ""
+ @$(ECHO) "You have run autoconf && autoheader && ./configure right?"
+ @$(ECHO) ""
+ $(MAKE) $(PROGRAM)
+ $(STRIP_PROG) $(PROGRAM)
+ $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
+# add program
+ (cd .. && $(TAR) -cvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
+# add config files
+ for foo in $(CONFIG_FILES); do \
+ (cd .. && $(TAR) -uvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
+ done;
+# add documentation
+ for foo in $(DOC_FILES); do \
+ (cd .. && $(TAR) -uvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
+ done;
+# and zip the archive
+ $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
+ $(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar
+ @$(ECHO) Distribution with binary created.
+
+# anonymously ncftps the package to sourceforge
+gen-upload:
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz
+ @$(ECHO) -------------------------------------------------------
+ @$(ECHO) Now goto
+ @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) ... and release the files.
+ @$(ECHO) -------------------------------------------------------
+
+# use with care
+gen-clean:
+ $(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar*
+
+#############################################################################
+# solaris distribution. verified on SF machines by swa.
+#############################################################################
+solaris-dist: gen-dist
+ @$(ECHO) Done.
+# anonymously ncftps the package to sourceforge
+solaris-upload: gen-upload
+ @$(ECHO) Done.
+# use with care
+solaris-clean: gen-clean
+ @$(ECHO) Done.
+
+#############################################################################
+# hpux distribution
+#############################################################################
+hpux-dist:
+ @$(ECHO) coming soon.
+hpux-upload:
+ @$(ECHO) coming soon.
+
+#############################################################################
+# debian distribution
+#############################################################################
+debian-dist:
+ @$(ECHO) coming soon.
+debian-upload:
+ @$(ECHO) coming soon.
+
+#############################################################################
+# macosx distribution
+#############################################################################
+macosx-dist:
+ @$(ECHO) coming soon.
+macosx-upload:
+ @$(ECHO) coming soon.
+
+#############################################################################
+# amiga distribution
+#############################################################################
+amiga-dist:
+ @$(ECHO) coming soon.
+amiga-upload:
+ @$(ECHO) coming soon.
+
+#############################################################################
+# freebsd distribution. verified on SF machines by swa.
+#############################################################################
+freebsd-dist: gen-dist
+ @$(ECHO) Done.
+# anonymously ncftps the package to sourceforge
+freebsd-upload: gen-upload
+ @$(ECHO) Done.
+# use with care
+freebsd-clean: gen-clean
+ @$(ECHO) Done.
+
+#############################################################################
+# Windows distribution
+#############################################################################
+win-dist:
+ $(ECHO) Not implemented.
+
+
+#############################################################################
+# Tarball distribution. Only source files. No binaries.
+#############################################################################
+
+MISC_FILES = install-sh config.sub configure.in GNUmakefile.in config.h.in config.guess privoxy*
+
+tarball-dist:
+ $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
+# add source files
+ for foo in `find . -name "*.c"`; do \
+ (cd .. && $(TAR) -uvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
+ done;
+# add header files
+ for foo in `find . -name "*.h"`; do \
+ (cd .. && $(TAR) -uvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
+ done;
+# add config files
+ for foo in $(CONFIG_FILES); do \
+ (cd .. && $(TAR) -uvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
+ done;
+# add misc files
+ for foo in $(MISC_FILES); do \
+ (cd .. && $(TAR) -uvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
+ done;
+# add documentation
+ for foo in $(DOC_FILES); do \
+ (cd .. && $(TAR) -uvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
+ done;
+# and zip the archive
+ $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
+ $(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar
+ @$(ECHO) Tarball distribution created.
+
+# anonymously ncftps the tarball to sourceforge
+tarball-upload:
+ ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
+ @$(ECHO) -------------------------------------------------------
+ @$(ECHO) Now goto
+ @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) ... and release the files.
+ @$(ECHO) -------------------------------------------------------
+
+# handle with care
+tarball-clean:
+ $(RM) privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
+
+#############################################################################
+#
+# Documentation
+#
+# converts doc/source/*.sgml into html, text and man pages
+#
+#############################################################################
+
+# our style file
+doc/source/ldpOK.dsl:
+ if [ "$(DKPREFIX)" != "none" ]; then \
+ sed -e "s@/usr/share/sgml/docbook/dsssl-stylesheets@$(DKPREFIX)@g" doc/source/ldp.dsl > doc/source/ldpOK.dsl; \
+ else \
+ cp doc/source/ldp.dsl doc/source/ldpOK.dsl; \
+ fi
+
+# Otherwise we get plain groff conversion.
+groff2html:
+ $(G2H_CMD) ./privoxy.1 > doc/webserver/man-page/privoxy-man-page.html
+
+# developer manual
+dok-devel: doc/source/ldpOK.dsl
+ rm -rf doc/webserver/developer-manual doc/source/developer-manual
+ mkdir -p doc/text doc/source/developer-manual
+ cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && mv developer-manual ../webserver
+ cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/developer-manual.txt && rm -rf tmp.html developer-manual
+
+# user manual
+dok-user: doc/source/ldpOK.dsl
+ rm -rf doc/webserver/user-manual doc/source/user-manual
+ mkdir -p doc/text doc/source/user-manual
+ cd doc/source/user-manual && $(DB) ../user-manual.sgml && cd .. && mv user-manual ../webserver
+ cd doc/source && $(DB) -V nochunks user-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/user-manual.txt && rm -rf tmp.html user-manual
+
+# faq
+dok-faq: doc/source/ldpOK.dsl
+ rm -rf doc/webserver/faq doc/source/faq
+ mkdir -p doc/text doc/source/faq
+ cd doc/source/faq && $(DB) ../faq.sgml && cd .. && mv faq ../webserver
+ cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) tmp.html > ../text/faq.txt && rm -rf tmp.html faq
+
+# man page
+dok-man: doc/source/ldpOK.dsl
+ rm -rf doc/man doc/webserver/man-page
+ mkdir -p doc/man -p doc/webserver/man-page
+ if [ "$(MAN2HTML)" != "false" ]; then \
+ $(ECHO) "<html><head><title>Privoxy Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html; \
+ man ./privoxy.1 | $(MAN2HTML) -bare \
+ >> doc/webserver/man-page/privoxy-man-page.html; \
+ $(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html; \
+ else \
+ $(MAKE) groff2html; \
+ fi
+
+# readme page
+dok-readme: doc/source/ldpOK.dsl
+ cd doc/source && $(DB) -V nochunks readme.sgml > tmp.html &&\
+ $(WDUMP) tmp.html > ../../README && rm -rf tmp.html
+
+dok: dok-devel dok-user dok-faq dok-man dok-readme
+# kludge to force recreation on next run. Rodgrigo?
+ @rm -f doc/source/ldpOK.dsl
+ @$(ECHO) Documentation created.
+
+#
+# an alternative to the above dok
+#
+redhat-dok: doc/source/ldpOK.dsl man2html
+ mkdir -p doc/text doc/man doc/source/user-manual \
+ doc/source/developer-manual doc/source/faq
+## user manual
+ rm -rf doc/webserver/user-manual
+ cd doc/source/user-manual && $(DB) ../user-manual.sgml && cd .. &&\
+ mv user-manual ../webserver
+ cd doc/source && $(DB) -V nochunks user-manual.sgml > tmp.html && \
+ $(WDUMP) tmp.html > ../text/user-manual.txt && rm -rf tmp.html \
+ user-manual
+## developer manual
+ rm -rf doc/webserver/developer-manual
+ cd doc/source/developer-manual && $(DB) ../developer-manual.sgml &&\
+ cd .. && mv developer-manual ../webserver
+ cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && \
+ $(WDUMP) tmp.html > ../text/developer-manual.txt && rm -rf tmp.html \
+ developer-manual
+## faq
+ rm -rf doc/webserver/faq
+ cd doc/source/faq && $(DB) ../faq.sgml && cd .. && mv faq ../webserver
+ cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) \
+ tmp.html > ../text/faq.txt && rm -rf tmp.html faq
+## readme
+ $(MAKE) redhat-readme
+# kludge to force recreation on next run. Rodgrigo?
+ @rm -f doc/source/ldpOK.dsl
+
+# For those with man2html ala RH7's.
+man2html:
+ mkdir -p doc/webserver/man-page
+ if [ "$(MAN2HTML)" != "false" ]; then \
+ $(MAN2HTML) privoxy.1 |grep -v "^Content-type" > doc/webserver/man-page/privoxy-man-page.html; \
+ perl -pi -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' doc/webserver/man-page/privoxy-man-page.html; \
+ else \
+ $(MAKE) groff2html; \
+ fi
+
+## Make README
+redhat-readme: doc/source/ldpOK.dsl
+ cd doc/source && $(DB) -V nochunks readme.sgml > tmp.html && $(WDUMP) \
+ tmp.html > ../../README && rm -rf tmp.html
+ # kludge to force recreation on next run. Rodgrigo?
+ @rm -f doc/source/ldpOK.dsl
+
+#############################################################################
+#
+# Webserver
+#
+# moves dokumentation to webserver
+#
+#############################################################################
+webserver: tidy
+ @$(ECHO) -------------------------------------------------------
+ @$(ECHO) You have run make dok/redhat-dok before, right?
+ @$(ECHO) Note that this command scps all stuff to the webserver,
+ @$(ECHO) it will not remove obsolete documents.
+ @$(ECHO) -------------------------------------------------------
+
+ @$(ECHO) Uploading
+ @cd doc/webserver; \
+ upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
+ $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xv'
+
+ @$(ECHO) Fixing permissions
+ @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/* -type d | xargs chmod 775 2>/dev/null'
+ @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/* -type f | xargs chmod 664 2>/dev/null'
+
+web-actions: tidy
+ @$(ECHO) Uploading
+ @cd doc/webserver/actions; \
+ upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
+ $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xv'
+
+ @$(ECHO) Fixing permissions
+ @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/* -type f | xargs chmod 664 2>/dev/null'
+
+#############################################################################
+# Source file dependencies
+#############################################################################
+
+actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h
+cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
+cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
+cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
+deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
+encode.@OBJEXT@: encode.c encode.h config.h
+errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h
+filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h @WIN_ONLY@win32.h
+gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
+jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
+jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h killpopup.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h cgi.h
+killpopup.@OBJEXT@: killpopup.c killpopup.h config.h $(PROJECT_H_DEPS) jcc.h loadcfg.h
+list.@OBJEXT@: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h
+loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h killpopup.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
+loaders.@OBJEXT@: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h
+miscutil.@OBJEXT@: miscutil.c miscutil.h config.h
+parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
+ssplit.@OBJEXT@: ssplit.c ssplit.h config.h miscutil.h
+urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h
+
+# GNU regex
+gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h
+
+# PCRS
+pcrs.@OBJEXT@: pcrs.c pcre/pcre.h pcrs.h
+
+# PCRE
+pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h
+pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h
+pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c
+pcre/pcreposix.@OBJEXT@: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h
+pcre/study.@OBJEXT@: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h
+
+# An auxiliary program makes the PCRE default character table source
+
+pcre/chartables.c: pcre/dftables@EXEEXT@
+ pcre/dftables@EXEEXT@ >pcre/chartables.c
+
+pcre/dftables@EXEEXT@: pcre/dftables.c pcre/maketables.c pcre/pcre.h pcre/internal.h pcre/config.h
+ $(CC) -o pcre/dftables@EXEEXT@ $(CFLAGS) pcre/dftables.c
+
+# Win32
+w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
+w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
+win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h
+
+w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/privoxy.ico config.h
+ windres -D__MINGW32__=0.2 -O coff -i $< -o $@
+
+# AmigaOS
+@AMIGAOS_ONLY@OBJS += amiga.o
+@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
+@AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
+@AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
+@AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h
+
+
+$(PROGRAM): $(OBJS) $(W32_FILES)
+ $(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
+
+clean:
+ $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) `find . -name TAGS -o -name tags`
+
+tidy:
+ $(RM) `find . -name "*~" -o -name "#*#"`
+
+clobber: tidy
+ $(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile privoxy.log core *.tar.gz *.tar
+#
+# FIXME: What is all this?
+#
+ $(RM) cscope.* *.pdb *.lib *.exp
+
+distclean: clobber
+
+tags: $(SRCS) $(HDRS)
+ etags $(SRCS) $(HDRS)
+
+install: all
+ #
+ # FIXME: This is a dirty hack to have an install target
+ # that works at least for some setups. This needs
+ # to be fixed!
+ #
+ $(STRIP_PROG) $(PROGRAM)
+ $(INSTALL) $(INSTALL_D) $(SBIN_DEST)
+ $(INSTALL) $(INSTALL_D) $(DEST)/user-manual
+ $(INSTALL) $(INSTALL_D) $(DEST)/templates
+ $(INSTALL) $(INSTALL_D) $(CONFDEST)
+ $(INSTALL) $(INSTALL_P) $(PROGRAM) $(SBIN_DEST)
+ if [ -d "doc/webserver/user-manual" ]; then $(INSTALL) $(INSTALL_T) doc/webserver/user-manual $(DEST); fi
+ $(INSTALL) $(INSTALL_T) templates/[a-z]* $(DEST)/templates
+ $(INSTALL) $(INSTALL_T) config default.action default.filter trust $(CONFDEST)
+ # FIXME $(ECHO) privoxy.logrotate privoxy.monthly privoxy.weekly
+ # FIXME: Need new manual! $(GZIP_PROG) -c privoxy.1 > $(MAN_DEST)/privoxy.1.gz
+ $(INSTALL) $(INSTALL_P) privoxy.init /etc/init.d/privoxy
+
+
+#############################################################################
+
+## Local Variables:
+## tab-width: 3
+## end:
+
# $Log: GNUmakefile.in,v $
+# Revision 1.63 2002/04/04 21:06:22 swa
+# cosmetics.
+#
+# Revision 1.62 2002/04/04 20:49:50 swa
+# attempt to consolidate the
+# different dokbook versions.
+#
+# Revision 1.61 2002/04/04 19:18:21 swa
+# readme was leftover directory. use w3m instead
+# of lynx to be consistent among developers. use
+# consistent target naming.
+#
+# Revision 1.60 2002/04/04 12:25:41 oes
+# Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions
+#
+# Revision 1.59 2002/04/04 08:32:45 swa
+# wrong name for tarball-dist target. further fixed content of tarball dist
+#
+# Revision 1.58 2002/04/04 06:32:58 hal9
+# New dok targets for make readme.
+#
+# Revision 1.57 2002/04/04 00:36:36 gliptak
+# always use pcre for matching
+#
+# Revision 1.56 2002/04/03 22:28:03 gliptak
+# Removed references to gnu_regex
+#
+# Revision 1.55 2002/04/03 19:54:29 swa
+# freebsd tested to work. attempt to move tarball dist target forward
+#
+# Revision 1.54 2002/04/03 14:54:07 oes
+# Standard clean and clobber semantics II
+#
+# Revision 1.53 2002/04/03 14:19:16 oes
+# Standard clean and clobber semantics
+#
+# Revision 1.52 2002/04/03 02:56:18 hal9
+# Revert previous FAQ numbering kludge.
+#
+# Revision 1.51 2002/04/02 13:03:56 oes
+# Added fix for webserver permissions
+#
+# Revision 1.50 2002/04/02 03:46:24 hal9
+# Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort
+# to make the Table of Contents not so 'busy' looking. SuSE needs testing :)
+#
+# Revision 1.49 2002/03/30 22:20:12 swa
+# cd didn't work. neither did find.
+#
+# Revision 1.48 2002/03/30 19:04:06 swa
+# people release differently. no good.
+# I want to make parts of the docs only.
+#
+# Revision 1.47 2002/03/30 09:05:21 swa
+# better packaging. better rpm building.
+# tar failed on sun (no exclude there).
+#
+# Revision 1.46 2002/03/29 20:09:01 swa
+# al's patch
+#
+# Revision 1.45 2002/03/29 19:45:45 swa
+# for lazy swa
+#
+# Revision 1.44 2002/03/29 17:42:44 gliptak
+# Correcting for Solaris tar limitations
+#
+# Revision 1.43 2002/03/29 07:40:03 swa
+# fixed make webserver. doh
+#
+# Revision 1.42 2002/03/29 06:59:04 swa
+# other users could not modify files on webserver
+#
+# Revision 1.41 2002/03/28 20:43:00 swa
+# set make correctly
+#
+# Revision 1.40 2002/03/28 04:22:44 hal9
+# More on man2html stuff.
+#
+# Revision 1.39 2002/03/28 01:04:14 hal9
+# More man2html stuff for docs.
+#
+# Revision 1.38 2002/03/27 16:02:30 swa
+# have a generic target
+#
+# Revision 1.37 2002/03/27 15:30:26 swa
+# have a consistent appearance
+#
+# Revision 1.36 2002/03/27 14:58:08 swa
+# can be used by mutilple targets
+#
+# Revision 1.35 2002/03/27 14:53:19 swa
+# added solaris-dist
+#
+# Revision 1.34 2002/03/27 10:30:11 swa
+# we want a html man file on the webserver
+#
+# Revision 1.33 2002/03/27 03:05:35 hal9
+# Added man2html target for docs (redhat-dok only for now)
+#
+# Revision 1.32 2002/03/26 22:29:54 swa
+# we have a new homepage!
+#
+# Revision 1.31 2002/03/26 14:00:18 swa
+# fixed make tarball, tarball-dist, tarball-clean
+#
+# Revision 1.30 2002/03/25 12:52:25 swa
+# new targets
+#
+# Revision 1.29 2002/03/24 17:03:55 jongfoster
+# Name change
+#
+# Revision 1.28 2002/03/24 16:19:48 swa
+# configure needs to be generated.
+#
+# Revision 1.27 2002/03/24 16:13:57 swa
+# generated files are a nono in cvs
+#
+# Revision 1.26 2002/03/24 15:36:02 swa
+# did not build.
+#
+# Revision 1.25 2002/03/24 14:31:08 swa
+# remove more crappy files. set RPM
+# release version correctly.
+#
+# Revision 1.24 2002/03/24 14:19:55 swa
+# set rpm package release in configure.in. nowhere else.
+#
+# Revision 1.23 2002/03/24 13:06:49 swa
+# suse-clean now runs fine
+#
+# Revision 1.22 2002/03/24 12:56:21 swa
+# name change related issues.
+#
+# Revision 1.21 2002/03/24 12:43:57 swa
+# name change
+#
+# Revision 1.20 2002/03/24 11:39:17 jongfoster
+# Renaming config files
+#
# Revision 1.19 2002/03/22 20:53:03 morcego
# - Ongoing process to change name to JunkbusterNG
# - configure/configure.in: no change needed
# Revision 1.32 2001/10/09 22:38:19 jongfoster
# Correcting actionsfile filename for Win32 INI build
#
-# Revision 1.31 2001/09/23 10:13:48 swa
-# upload process established. run make webserver and
-# the documentation is moved to the webserver. documents
-# are now linked correctly.
-#
-# Revision 1.30 2001/09/19 17:55:49 oes
-# Fixed CFLAGS
-#
-# Revision 1.29 2001/09/16 17:34:27 jongfoster
-# Removing showargs.[ch], adding cgi(simple|edit).[ch]
-# Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source
-# of build problems.
-#
-# Revision 1.28 2001/09/13 15:19:08 swa
-# we want text files as well.
-#
-# Revision 1.27 2001/09/13 13:11:37 steudten
-#
-# Replace DEBUG_CFLAGS with OTHER_CFLAGS
-#
-# Revision 1.26 2001/09/12 23:44:54 david__schmidt
-# Mac OSX (Darwin) support added.
-#
-# Revision 1.25 2001/09/12 22:55:45 joergs
-# AmigaOS support added.
-#
-# Revision 1.24 2001/09/12 17:28:59 david__schmidt
-#
-# OS/2 port: update autoconf'd support for the platform.
-#
-# Revision 1.23 2001/09/12 16:28:42 swa
-# added "make dok" section to generate html pages from
-# the sgml source documents. note that the we do not want
-# generated stuff in cvs.
-#
-# Revision 1.22 2001/09/10 16:31:23 swa
-# buildroot definition in the specfile fucks up the build
-# process under suse. hence I moved it to the "rpm -ta"
-# command
-#
-# Revision 1.21 2001/09/10 11:12:49 oes
-# Turning on -Wall
-#
-# Revision 1.20 2001/08/02 22:04:29 jongfoster
-# Removing some remaining references to obsolete w32rulesdlg.[ch]
-#
-# Revision 1.19 2001/07/30 22:14:03 jongfoster
-# Removing obsolete w32rulesdlg.c and w32rulesdlg.h
-#
-# Revision 1.18 2001/07/29 17:09:17 jongfoster
-# Major changes to build system in order to fix these bugs:
-# - pthreads under Linux was broken - changed -lpthread to -pthread
-# - Compiling in MinGW32 mode under CygWin now correctly detects
-# which shared libraries are available
-# - Solaris support (?) (Not tested under Solaris yet)
-#
-# Revision 1.17 2001/07/28 16:44:54 oes
-# Fixed sed LF->CRLF conversion and removed deprecated files
-#
-# Revision 1.16 2001/07/15 19:45:33 jongfoster
-# Added support for linking with POSIX threads library
-#
-# Revision 1.15 2001/07/13 13:48:07 oes
-# - Moved STATIC #define for pcre to (ac)config.h
-# - Made -Ipcre depandant on static pcre compilation to
-# avoid version conflicts
-# - Included compilation and depandancies for new deanimate.c
-# - Made changes to the pcre/pcreposix/pcrs build process
-# as required by the new library autodetection in
-# configure.in
-#
-# Revision 1.14 2001/07/01 16:27:44 oes
-# Fixed misplaced dependancy
-#
-# Revision 1.13 2001/06/29 13:18:36 oes
-# - added depandancy of filters.o on cgi.h
-#
-# Revision 1.12 2001/06/12 17:15:56 swa
-# fixes, because a clean build on rh6.1 was impossible.
-# GZIP confuses make, %configure confuses rpm, etc.
+# Revision 1.31 2001/09/23 10:13:48 swa
+# upload process established. run make webserver and
+# the documentation is moved to the webserver. documents
+# are now linked correctly.
#
-# Revision 1.11 2001/06/11 11:26:35 sarantis
-# RPM version should be the same as ijbswa version. The rpm release is
-# specified in the specfile.
+# Revision 1.30 2001/09/19 17:55:49 oes
+# Fixed CFLAGS
#
-# Revision 1.10 2001/06/07 17:27:45 swa
-# added suse build section
+# Revision 1.29 2001/09/16 17:34:27 jongfoster
+# Removing showargs.[ch], adding cgi(simple|edit).[ch]
+# Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source
+# of build problems.
#
-# Revision 1.9 2001/06/04 18:31:58 swa
-# files are now prefixed with either `confdir' or `logdir'.
-# `make redhat-dist' replaces both entries confdir and logdir
-# with redhat values
+# Revision 1.28 2001/09/13 15:19:08 swa
+# we want text files as well.
#
-# Revision 1.8 2001/06/04 10:44:57 swa
-# `make redhatr-dist' now works. Except for the paths
-# in the config file.
+# Revision 1.27 2001/09/13 13:11:37 steudten
#
-# Revision 1.7 2001/06/03 17:09:09 swa
-# swa for oes: reversed my earlier change
+# Replace DEBUG_CFLAGS with OTHER_CFLAGS
#
-# Revision 1.6 2001/06/03 17:07:27 swa
-# swa for oes
+# Revision 1.26 2001/09/12 23:44:54 david__schmidt
+# Mac OSX (Darwin) support added.
#
-# Revision 1.5 2001/06/03 13:57:26 swa
-# compile cgi.c (for andreas' GUI)
+# Revision 1.25 2001/09/12 22:55:45 joergs
+# AmigaOS support added.
#
-# Revision 1.4 2001/05/31 21:18:45 jongfoster
-# Added files actions.[ch], actionlist.h, list.[ch] to Makefile
+# Revision 1.24 2001/09/12 17:28:59 david__schmidt
#
-# Revision 1.3 2001/05/29 20:02:48 joergs
-# Changes for AmigaOS added.
+# OS/2 port: update autoconf'd support for the platform.
#
-# Revision 1.2 2001/05/17 22:23:23 oes
-# - Added auto-generation of CRLFs for Win32 config files
-# - Added comment-prefix to all Win32-only options in the config file
-# and provided auto stripping of this prefix for the Win32 platform by make
+# Revision 1.23 2001/09/12 16:28:42 swa
+# added "make dok" section to generate html pages from
+# the sgml source documents. note that the we do not want
+# generated stuff in cvs.
#
-# Revision 1.1.1.1 2001/05/15 13:59:00 oes
-# Initial import of version 2.9.3 source tree
+# Revision 1.22 2001/09/10 16:31:23 swa
+# buildroot definition in the specfile fucks up the build
+# process under suse. hence I moved it to the "rpm -ta"
+# command
#
+# Revision 1.21 2001/09/10 11:12:49 oes
+# Turning on -Wall
#
-
-#############################################################################
-# Version number (for RPM)
-#############################################################################
-
-VERSION_MAJOR = @VERSION_MAJOR@
-VERSION_MINOR = @VERSION_MINOR@
-VERSION_POINT = @VERSION_POINT@
-CODE_STATUS = @CODE_STATUS@
-VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
-# will automatically be postfixed with -$(RPM_PACKAGEV) in the SPECfile
-RPM_VERSION = $(VERSION)
-RPM_PACKAGEV = 3
-
-
-#############################################################################
-# Directories for "make install"
-#############################################################################
-
-DEST = @sysconfdir@/junkbuster
-SBIN_DEST = @sbindir@
-MAN_DEST = @mandir@
-
-
-#############################################################################
-# Build tools
-#############################################################################
-
-PROGRAM = jbng@EXEEXT@
-CC = @CC@
-ECHO = echo
-GZIP_PROG = gzip
-INSTALL = cp -f
-LD = @CC@
-RM = rm -f
-STRIP_PROG = strip
-SED = sed
-CAT = cat
-RPM = rpm
-MV = mv
-TAR = tar
-MAKE = make
-LN = ln
-WDUMP = @WDUMP@ -dump
-JADEBIN = @JADEBIN@
-DB = $(JADEBIN) -t sgml -ihtml -D.. -d ldpOK.dsl\#html
-DB2HTML = @DB2HTML@
-DKPREFIX = @DKPREFIX@
-
-# Program to do LF->CRLF
+# Revision 1.20 2001/08/02 22:04:29 jongfoster
+# Removing some remaining references to obsolete w32rulesdlg.[ch]
#
-# The sed version should be the most portable, but it doesn't for for me,
-# the other two do. FIXME.
-# - Jon
-#DOSFILTER = $(SED) -e $$'s,$$,\r,'
-#DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
-DOSFILTER = perl -p -e 's/\n/\r\n/'
-
-#############################################################################
-# Setup for make distribution rh and suse for now
-#############################################################################
-
-TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
-RPM_BASE = @RPM_BASE@
-
-#############################################################################
-# Filenames and libraries
-#############################################################################
-
-C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \
- errlog.c filters.c gateway.c jbsockets.c jcc.c killpopup.c \
- list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \
- urlmatch.c
-
-C_OBJS = $(C_SRC:.c=.@OBJEXT@)
-C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h
-
-W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c
-W32_FILES = @WIN_ONLY@w32.res
-W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES)
-W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h
-W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32
-W32_INIS = @WIN_ONLY@config.txt trust.txt
-
-PCRS_SRC = @STATIC_PCRS_ONLY@pcrs.c
-PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@)
-PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h)
-
-PCRE_SRC = @STATIC_PCRE_ONLY@pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c
-PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:.c=.@OBJEXT@)
-PCRE_HDRS = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h
-
-# No REGEX (Either because dynamically linked pcreposix, or no regex at all):
-REGEX_SRC =
-# GNU REGEX:
-@GNU_REGEX_ONLY@REGEX_SRC = gnu_regex.c
-# PCRE REGEX:
-@PCRE_REGEX_ONLY@@STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c
-
-REGEX_OBJS = $(REGEX_SRC:.c=.@OBJEXT@)
-REGEX_HDRS = $(REGEX_SRC:.c=.h)
-
-# Dependencies introduced by #include "project.h".
-PROJECT_H_DEPS = project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@pcre/pcre.h
-
-# Socket libraries for platforms that need them explicitly defined
-SOCKET_LIB = @SOCKET_LIB@
-
-# PThreads library, if needed.
-PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@
-
-SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC)
-OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS)
-HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS)
-LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB)
-
-
-#############################################################################
-# Compiler switches
-#############################################################################
-
-# The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build.
-# The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a
-# Win32 GUI build.
-# The flag "-pthread" is required if using Pthreads under Linux (and
-# possibly other OSs).
-SPECIAL_CFLAGS = @SPECIAL_CFLAGS@
-
-# Add your flags here
-OTHER_CFLAGS =
-
-CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
- @STATIC_PCRE_ONLY@ -Ipcre
-
-LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
-
-
-#############################################################################
-# Build section.
+# Revision 1.19 2001/07/30 22:14:03 jongfoster
+# Removing obsolete w32rulesdlg.c and w32rulesdlg.h
#
-# There should NOT be any targets above this line.
-#############################################################################
-all: $(PROGRAM)
-
-
-#############################################################################
-# Phony targets
-#############################################################################
-.PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \
-suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
-install
-
-
-#############################################################################
-# Define this explicitly because Solaris is broken!
-#############################################################################
-%.o: %.c
- $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
-
-
-#############################################################################
-# Win32 config files
-#############################################################################
-
-inifiles: $(W32_INIS)
-
-config.txt: config
- $(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
- -e 's!\jarfile jarfile!jarfile jar.log!' \
- -e 's!\logfile logfile!logfile junkbuster.log!' \
- -e 's!#Win32-only: !!' \
- < $< | \
- $(DOSFILTER) > $@
- # LF to CRLF in default.action
- $(DOSFILTER) <default.action >default.action.txt && mv default.action.txt default.action
- # LF to CRLF in default.filter
- $(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
-
-trust.txt: trust
- $(DOSFILTER) < $< > $@
-
-re_filterfile.txt: re_filterfile
- $(DOSFILTER) < $< > $@
-
-
-#############################################################################
-# redhat distribution alpha and x86
-#############################################################################
-
-redhat-dist:
- for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
- if [ ! -w $(RPM_BASE)/$$dir ]; then \
- $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
- $(ECHO) "Or add a suitable path to .rpmmacros like."; \
- $(ECHO) "%_topdir /home/foo/rpm-build"; \
- exit 1; \
- fi; \
- done; \
-
- $(MAKE) clobber
- if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
-
- TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
- if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
- -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
- junkbusterng-rh.spec > $$TMPFILE ; then \
- $(MV) -f $$TMPFILE junkbusterng-rh.spec; \
- else \
- $(ECHO) "Could not set version info in specfile."; \
- exit 1;\
- fi
-
- $(TAR) --exclude "CVS" --exclude "junkbuster-suse.spec" -czf $(TAR_ARCH) .
- $(RPM) --clean -ta $(TAR_ARCH)
- if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
-
+# Revision 1.18 2001/07/29 17:09:17 jongfoster
+# Major changes to build system in order to fix these bugs:
+# - pthreads under Linux was broken - changed -lpthread to -pthread
+# - Compiling in MinGW32 mode under CygWin now correctly detects
+# which shared libraries are available
+# - Solaris support (?) (Not tested under Solaris yet)
#
-# anonymously ncftps the rpms to sourceforge
+# Revision 1.17 2001/07/28 16:44:54 oes
+# Fixed sed LF->CRLF conversion and removed deprecated files
#
-redhat-upload:
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/junkbusterng-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
-# better should use `arch` here instead of ix86 to support other platforms too
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/junkbusterng-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
- @$(ECHO) -------------------------------------------------------
- @$(ECHO) Now goto
- @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
- @$(ECHO) ... and release the files.
- @$(ECHO) -------------------------------------------------------
- # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
-
-#############################################################################
-# sun solaris distribution
-#############################################################################
-solaris-dist:
- @$(ECHO) coming soon.
-
-#############################################################################
-# suse distribution (need to be root to build)
-#############################################################################
-
-suse-dist:
- for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
- if [ ! -w $(RPM_BASE)/$$dir ]; then \
- $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
- $(ECHO) "Or add a suitable path to .rpmmacros like."; \
- $(ECHO) "%_topdir /home/foo/rpm-build"; \
- exit 1; \
- fi; \
- done; \
-
- $(MAKE) clobber
- if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
-
- TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
- if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
- -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
- junkbuster-suse.spec > $$TMPFILE ; then \
- $(MV) -f $$TMPFILE junkbuster-suse.spec; \
- else \
- $(ECHO) "Could not set version info in specfile."; \
- exit 1;\
- fi
-
- $(TAR) --exclude "CVS" --exclude "junkbuster-rh.spec" -czf $(TAR_ARCH) .
- $(RPM) --clean -ta $(TAR_ARCH)
- if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
-
+# Revision 1.16 2001/07/15 19:45:33 jongfoster
+# Added support for linking with POSIX threads library
#
-# anonymously ncftps the rpms to sourceforge
+# Revision 1.15 2001/07/13 13:48:07 oes
+# - Moved STATIC #define for pcre to (ac)config.h
+# - Made -Ipcre depandant on static pcre compilation to
+# avoid version conflicts
+# - Included compilation and depandancies for new deanimate.c
+# - Made changes to the pcre/pcreposix/pcrs build process
+# as required by the new library autodetection in
+# configure.in
#
-suse-upload:
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/junkbuster-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
-# better should use `arch` here instead of ix86 to support other platforms too
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/junkbuster-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
- @$(ECHO) -------------------------------------------------------
- @$(ECHO) Now goto
- @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
- @$(ECHO) ... and release the files.
- @$(ECHO) -------------------------------------------------------
-
-# handle with care. use with root.
-suse-clean:
- rpm -e junkbuster-suse
- rm -rf /etc/junkbuster
- rm -rf /etc/rc.d/junkbuster*
- rm -rf /var/run/junkbuster.pid
- rm -rf /var/log/junkbuster
- rm -f /etc/init.d/junkbuster
- rm -f /usr/sbin/junkbuster
- rm -f /usr/sbin/rcjunkbuster
- rm -f /usr/share/man/man1/junkbuster.1.gz
-
-#############################################################################
-# Windows distribution
-#############################################################################
-win-dist:
- $(ECHO) Not implemented.
-
-
-#############################################################################
-# Tarball distribution
-#############################################################################
-tarball-dist:
- @make clean
- make $(PROGRAM)
-# remove all objects and create the tarball with the binary
- cd .. && $(RM) ijb/a.out ijb/core ijb/*.@OBJEXT@ && tar --exclude "ijb/CVS" -cvzf ../JunkbusterNG-distribution-$(VERSION).tar.gz ijb/
- chmod a+r ../../JunkbusterNG-distribution-$(VERSION).tar.gz
- @$(ECHO) Tarball with binary created.
-
-#############################################################################
+# Revision 1.14 2001/07/01 16:27:44 oes
+# Fixed misplaced dependancy
#
-# Documentation
+# Revision 1.13 2001/06/29 13:18:36 oes
+# - added depandancy of filters.o on cgi.h
#
-# converts doc/source/*.sgml into html, text and man pages
+# Revision 1.12 2001/06/12 17:15:56 swa
+# fixes, because a clean build on rh6.1 was impossible.
+# GZIP confuses make, %configure confuses rpm, etc.
#
-#############################################################################
-dok: doc/source/ldpOK.dsl
- mkdir -p doc/text doc/man
-# user manual
- rm -rf doc/webserver/user-manual
- cd doc/source && $(DB2HTML) -s ldpOK.dsl user-manual.sgml && mv user-manual ../webserver
- cd doc/source && $(DB2HTML) -s ldpOK.dsl --nochunks user-manual.sgml > tmp.html && lynx -dump tmp.html > ../text/user-manual.txt && rm -rf tmp.html user-manual
-## developer manual
- rm -rf doc/webserver/developer-manual
- cd doc/source && $(DB2HTML) -s ldpOK.dsl developer-manual.sgml && mv developer-manual ../webserver
- cd doc/source && $(DB2HTML) -s ldpOK.dsl --nochunks developer-manual.sgml > tmp.html && lynx -dump tmp.html > ../text/developer-manual.txt && rm -rf tmp.html developer-manual
-## faq
- rm -rf doc/webserver/faq
- cd doc/source && $(DB2HTML) -s ldpOK.dsl faq.sgml && mv faq ../webserver
- cd doc/source && $(DB2HTML) -s ldpOK.dsl --nochunks faq.sgml > tmp.html && lynx -dump tmp.html > ../text/faq.txt && rm -rf tmp.html faq
-
-redhat-dok: doc/source/ldpOK.dsl
- mkdir -p doc/text doc/man doc/source/user-manual \
- doc/source/developer-manual doc/source/faq
-## user manual
- rm -rf doc/webserver/user-manual
- cd doc/source/user-manual && $(DB) ../user-manual.sgml && cd .. &&\
- mv user-manual ../webserver
- cd doc/source && $(DB) -V nochunks user-manual.sgml > tmp.html && \
- $(WDUMP) tmp.html > ../text/user-manual.txt && rm -rf tmp.html \
- user-manual
-## developer manual
- rm -rf doc/webserver/developer-manual
- cd doc/source/developer-manual && $(DB) ../developer-manual.sgml &&\
- cd .. && mv developer-manual ../webserver
- cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && \
- $(WDUMP) tmp.html > ../text/developer-manual.txt && rm -rf tmp.html \
- developer-manual
-## faq
- rm -rf doc/webserver/faq
- cd doc/source/faq && $(DB) ../faq.sgml && cd .. && mv faq ../webserver
- cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) \
- tmp.html > ../text/faq.txt && rm -rf tmp.html faq
-
-doc/source/ldpOK.dsl:
- if [ "$(DKPREFIX)" != "none" ]; then \
- sed -e "s@/usr/share/sgml/docbook/dsssl-stylesheets@$(DKPREFIX)@g" doc/source/ldp.dsl > doc/source/ldpOK.dsl; \
- else \
- cp doc/source/ldp.dsl doc/source/ldpOK.dsl; \
- fi
-
-#############################################################################
+# Revision 1.11 2001/06/11 11:26:35 sarantis
+# RPM version should be the same as ijbswa version. The rpm release is
+# specified in the specfile.
#
-# Webserver
+# Revision 1.10 2001/06/07 17:27:45 swa
+# added suse build section
+#
+# Revision 1.9 2001/06/04 18:31:58 swa
+# files are now prefixed with either `confdir' or `logdir'.
+# `make redhat-dist' replaces both entries confdir and logdir
+# with redhat values
+#
+# Revision 1.8 2001/06/04 10:44:57 swa
+# `make redhatr-dist' now works. Except for the paths
+# in the config file.
+#
+# Revision 1.7 2001/06/03 17:09:09 swa
+# swa for oes: reversed my earlier change
+#
+# Revision 1.6 2001/06/03 17:07:27 swa
+# swa for oes
+#
+# Revision 1.5 2001/06/03 13:57:26 swa
+# compile cgi.c (for andreas' GUI)
+#
+# Revision 1.4 2001/05/31 21:18:45 jongfoster
+# Added files actions.[ch], actionlist.h, list.[ch] to Makefile
+#
+# Revision 1.3 2001/05/29 20:02:48 joergs
+# Changes for AmigaOS added.
+#
+# Revision 1.2 2001/05/17 22:23:23 oes
+# - Added auto-generation of CRLFs for Win32 config files
+# - Added comment-prefix to all Win32-only options in the config file
+# and provided auto stripping of this prefix for the Win32 platform by make
+#
+# Revision 1.1.1.1 2001/05/15 13:59:00 oes
+# Initial import of version 2.9.3 source tree
#
-# moves dokumentation to webserver
#
-#############################################################################
-webserver:
- @$(ECHO) -------------------------------------------------------
- @$(ECHO) You have run make dok/redhat-dok before, right?
- @$(ECHO) Note that this command scps all stuff to the webserver,
- @$(ECHO) it will not remove obsolete documents.
- @$(ECHO) -------------------------------------------------------
- chmod -R a+r doc/webserver
- find doc/webserver -type d -exec chmod a+rx {} \;
- cd doc/webserver && scp -Cr . ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/
-
-#############################################################################
-# Source file dependencies
-#############################################################################
-
-actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h
-cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
-cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
-cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
-deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
-encode.@OBJEXT@: encode.c encode.h config.h
-errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h
-filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h @WIN_ONLY@win32.h
-gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
-jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
-jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h killpopup.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h cgi.h
-killpopup.@OBJEXT@: killpopup.c killpopup.h config.h $(PROJECT_H_DEPS) jcc.h loadcfg.h
-list.@OBJEXT@: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h
-loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h killpopup.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
-loaders.@OBJEXT@: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h
-miscutil.@OBJEXT@: miscutil.c miscutil.h config.h
-parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
-ssplit.@OBJEXT@: ssplit.c ssplit.h config.h miscutil.h
-urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h
-
-# GNU regex
-gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h
-
-# PCRS
-pcrs.@OBJEXT@: pcrs.c pcre/pcre.h pcrs.h
-
-# PCRE
-pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h
-pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h
-pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c
-pcre/pcreposix.@OBJEXT@: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h
-pcre/study.@OBJEXT@: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h
-
-# An auxiliary program makes the PCRE default character table source
-
-pcre/chartables.c: pcre/dftables@EXEEXT@
- pcre/dftables@EXEEXT@ >pcre/chartables.c
-
-pcre/dftables@EXEEXT@: pcre/dftables.c pcre/maketables.c pcre/pcre.h pcre/internal.h pcre/config.h
- $(CC) -o pcre/dftables@EXEEXT@ $(CFLAGS) pcre/dftables.c
-
-# Win32
-w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
-w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
-win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h
-
-w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/junkbust.ico config.h
- windres -D__MINGW32__=0.2 -O coff -i $< -o $@
-
-# AmigaOS
-@AMIGAOS_ONLY@OBJS += amiga.o
-@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
-@AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
-@AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
-@AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h
-
-
-$(PROGRAM): $(OBJS) $(W32_FILES)
- $(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
-
-clean:
- $(RM) a.out core $(OBJS) $(W32_FILES) $(W32_INIS)
-
-clobber: clean
- $(RM) $(PROGRAM) cscope.* logfile *.pdb *.lib *.exp `find . -name tags` TAGS junkbuster.log config.cache *~ *.tar.gz
-
-tags: $(SRCS) $(HDRS)
- etags $(SRCS) $(HDRS)
-
-tarball-src: clobber
- $(LN) -s current ../JunkbusterNG-$(VERSION)-$(CODE_STATUS)
- $(TAR) -C.. -cvhzf JunkbusterNG-$(VERSION)-$(CODE_STATUS)-src.tar.gz JunkbusterNG-$(VERSION)-$(CODE_STATUS)
- $(RM) ../JunkbusterNG-$(VERSION)-$(CODE_STATUS)
-
-install: all
- #
- # FIXME: This is a dirty hack to have an install target
- # that works at least for some setups. This needs
- # to be fixed!
- #
- $(STRIP_PROG) $(PROGRAM)
- $(INSTALL) $(PROGRAM) $(SBIN_DEST)
- mkdir -p $(DEST)/user-manual
- mkdir -p $(DEST)/templates
- cp -r doc/webserver/user-manual $(DEST)
- cp -r templates $(DEST)
- $(INSTALL) config default.action default.filter trust $(DEST)
- # FIXME $(ECHO) junkbuster.logrotate junkbuster.monthly junkbuster.weekly
- # FIXME: Need new manual! $(GZIP_PROG) -c junkbuster.1 > $(MAN_DEST)/junkbuster.1.gz
- $(INSTALL) junkbusterng.init /etc/init.d/junkbusterng
-
-
-#############################################################################
-
-## Local Variables:
-## tab-width: 3
-## end: