# Note: Makefile is built automatically from Makefile.in
#
-# $Id: GNUmakefile.in,v 1.113 2002/07/30 21:50:25 hal9 Exp $
+# $Id: GNUmakefile.in,v 1.136 2002/12/28 04:10:21 david__schmidt Exp $
#
# Written by and Copyright (C) 2001 the SourceForge
# Privoxy team. http://www.privoxy.org/
DIR_PRIVOXY_ROOT := .
DIR_PRIVOXY_SRC := $(DIR_PRIVOXY_ROOT)/src
DIR_PRIVOXY_SRC_PCRE := $(DIR_PRIVOXY_ROOT)/pcre
+DIR_PRIVOXY_SRC_JAVA := $(DIR_PRIVOXY_ROOT)/src/java
DIR_PRIVOXY_OBJ := $(DIR_PRIVOXY_ROOT)/obj
#############################################################################
-# Directories for "make install"
+# "make install" settings
#############################################################################
-DEST = @prefix@
-CONFDEST = @prefix@@sysconfdir@
-SBIN_DEST = @prefix@@sbindir@
-MAN_DEST = @prefix@@mandir@
-DOK_WEB_USEM = doc/webserver/user-manual
+# User and Group settings
+USER = @USER@
+GROUP = @GROUP@
+
+# PATHS set from configure
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+CONF_BASE = @sysconfdir@
+SBIN_DEST = @sbindir@
+MAN_DIR = @mandir@
+MAN_DEST = $(MAN_DIR)/man1
+SHARE_DEST = @datadir@
+DOC_DEST = $(SHARE_DEST)/doc/privoxy
+VAR_DEST = @localstatedir@
+LOGS_DEST = $(VAR_DEST)/log/privoxy
+PIDS_DEST = $(VAR_DEST)/run
+
+# if $prefix = /usr/local then the default CONFDEST change from
+# CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy
+# by the target rule CONF_DEST
+#
+# also if the $prefix is /usr/local and there is no
+# $(SHARE_DEST)/doc, it checks for $prefix/doc and installs there
+# instead in this situation
+#
+# finally if $prefix=/usr/local and VAR_DEST=$prefix/var it
+# changes this to /var for storing the logs and pidfile
+
+# Where to find docs. The install goes to $share_dest/doc/privoxy.
+DOK_WEB = doc/webserver/
+
+# Install usage should be compatible with install-sh.
+INSTALL = @INSTALL@
+
+# Permissions used during installation.
+# Binaries (daemon, init scripts)
+BIN_MODE = 0755
+# Files daemon writes to: *action, trust and logs.
+RWD_MODE = 0660
+# Misc files, docs, etc.
+RA_MODE = 0664
+# Directory
+DIR_MODE = 0755
+
+INSTALL_P = -m $(BIN_MODE)
+INSTALL_T = -m $(RA_MODE)
+INSTALL_D = -m $(DIR_MODE) -d
+INSTALL_R = -m $(RWD_MODE)
+# install options for superuser install
+#INSTALL_S = -g -o
#############################################################################
-# Build tools
+# Build and Install tools
#############################################################################
PROGRAM = privoxy@EXEEXT@
CC = @CC@
ECHO = echo
GZIP_PROG = gzip
-INSTALL = @INSTALL@
-INSTALL_P = -m 0750 -g @GROUP@ -o @USER@ -b
-INSTALL_T = -m 0640 -g @GROUP@ -o @USER@ -b
-INSTALL_D = -m 0750 -g @GROUP@ -o @USER@ -d
+# id -u is not universal. FIXME: need to set from configure. Breaks on
+# Solaris.
+#ID = id -u
+ID = id
LD = @CC@
RM = rm -f
+RMDIR = rmdir
+MKDIR = ./mkinstalldirs
STRIP_PROG = strip
-SED = sed
+CP = cp -f
+SED = sed
GREP = grep
CAT = cat
RPM = rpm
-MV = mv
+MV = mv
TAR = tar
LN = ln
-WDUMP = @WDUMP@ -dump
-JADECAT = @JADECAT@
-JADEBIN = @JADEBIN@
+TOUCH = touch
+KILL = kill
+CHMOD = chmod
+CHOWN = chown
+CHGRP = chgrp
+GROUPS = groups
DOC_STATUS = @DOC_STATUS@
# Note: Please make sure that -d ldp.dsl\#html stays the last option to
# $(JADEBIN), because for some targets "-notoc" will be appended
# to it (--> "ldp.dsl\#html-notoc").
-DB = $(JADEBIN) $(JADECAT) -i$(DOC_STATUS) -ihtml -t sgml -D.. -d ldp.dsl\#html
-MAN2HTML = @MAN2HTML@
-G2H_CMD = groff -mandoc -Thtml
TARGET_OS = @host@
PERL = perl
DOC_DIR = doc/source
-DOC_TMP = $(DOC_DIR)/tmp
-DKPREFIX = @DKPREFIX@
-
-#User Group paras
-USER = @USER@
-GROUP = @GROUP@
# Program to do LF->CRLF
#
#DOSFILTER = $(SED) -e $$'s,$$,\r,'
#DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
DOSFILTER = $(PERL) -p -e 's/\n/\r\n/'
+CVSROOT = :pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa
+TMPDIR := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX)
#############################################################################
# Setup for make distribution rh and suse for now
#############################################################################
# We include these files in our distributions
#############################################################################
+CONFIGS = config trust default.action standard.action user.action default.filter
# take care that no CVS .cvsignore or other crappy files
# are included here
# and escape every '#' in the find. doh.
-CONFIG_FILES = config trust \
- default.action \
- standard.action user.action \
- default.filter \
+CONFIG_FILES = $(CONFIGS) \
`find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
-DOC_FILES = AUTHORS LICENSE README ChangeLog \
+DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \
`find doc/text/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` \
`find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \
`find doc/webserver/ -name "*.css"` \
$(DIR_PRIVOXY_SRC)/urlmatch.c
C_OBJS = $(C_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
-C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h
+C_HDRS = $(C_SRC:.c=.h) $(DIR_PRIVOXY_SRC)/project.h $(DIR_PRIVOXY_SRC)/actionlist.h
W32_SRC = @WIN_ONLY@$(DIR_PRIVOXY_SRC)/w32log.c $(DIR_PRIVOXY_SRC)/w32taskbar.c $(DIR_PRIVOXY_SRC)/win32.c
W32_FILES = @WIN_ONLY@$(DIR_PRIVOXY_OBJ)/w32res.res
PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:$(DIR_PRIVOXY_SRC_PCRE)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
PCRE_HDRS = @STATIC_PCRE_ONLY@$(DIR_PRIVOXY_SRC_PCRE)/config.h $(DIR_PRIVOXY_SRC_PCRE)/chartables.c $(DIR_PRIVOXY_SRC_PCRE)/internal.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h
+ACTIVITY_SRC = @ACTIVITY_ONLY@$(DIR_PRIVOXY_SRC)/stats.c
+ACTIVITY_OBJS = @ACTIVITY_ONLY@$(ACTIVITY_SRC:$(DIR_PRIVOXY_SRC)/%.c=$(DIR_PRIVOXY_OBJ)/%.@OBJEXT@)
+ACTIVITY_HDRS = @ACTIVITY_ONLY@$(ACTIVITY_SRC:.c=.h) $(DIR_PRIVOXY_SRC)/ipc.h
+
# No REGEX (maybe because dynamically linked pcreposix):
REGEX_SRC =
@STATIC_PCRE_ONLY@REGEX_SRC = $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.c
# PThreads library, if needed.
PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@
-SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC)
-OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS)
-HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS)
+SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC) $(ACTIVITY_SRC)
+OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS) $(ACTIVITY_OBJS)
+HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS) $(ACTIVITY_HDRS)
LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB)
.PHONY: all inifiles redhat-dist redhat-upload redhat-test solaris-dist suse-dist \
suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
install conectiva-spec conectiva-dist conectiva-upload debian-dist \
-debian-upload ensure-wdump ensure-jadebin ensure-dkprefix
+debian-upload ensure-wdump ensure-jadebin ensure-dkprefix CONF_DEST LOG_DEST \
+PID_DEST check_doc install-strip uninstall GROUP_T java-activity-console
#############################################################################
$(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
$(DIR_PRIVOXY_OBJ):
- mkdir obj
+ $(CHMOD) $(DIR_MODE) $(MKDIR)
+ $(MKDIR) obj
#############################################################################
# Strip master copy comments from default.action:
if [ "$$answer" != "yes i am sure" ]; then exit 1; fi \
fi;
-
#############################################################################
-# RPM specifice stuff (SuSE or Redhat, ..)
+# create tar.gz from CVS:
+# This make-target is usually called through 'create-archive'. If you
+# run 'make create-snapshot' without setting SNAPVERSION, you'll get a
+# tar.gz with the current date in the name and as a releasenumber in the
+# spec-file. But the main usage is to run it as follows (Red Hat example):
+# make SNAPVERSION=1.6x create-snapshot
+# This creates a tar.gz and spec-file for a Red Hat 6.x version.
+#############################################################################
+create-snapshot:
+ @tag=`cvs -d $(CVSROOT) status Makefile | awk ' /Sticky Tag/ { print $$3 } '` 2> /dev/null; \
+ [ x"$$tag" = x"(none)" ] && tag=HEAD; \
+ echo "*** Creating package from $$tag!"; \
+ cd $(TMPDIR) ; cvs -Q -d $(CVSROOT) export -r $$tag current || echo "Um... export aborted."
+ @cd $(TMPDIR)/current; \
+ TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
+ if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
+ -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
+ privoxy-rh.spec > $$TMPFILE ; then \
+ $(MV) -f $$TMPFILE privoxy-rh.spec; \
+ else \
+ $(ECHO) "Could not set version info in specfile."; \
+ exit 1;\
+ fi;\
+ if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
+ -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
+ privoxy-suse.spec > $$TMPFILE ; then \
+ $(MV) -f $$TMPFILE privoxy-suse.spec; \
+ else \
+ $(ECHO) "Could not set version info in specfile."; \
+ exit 1;\
+ fi; \
+ $(RM) $(TMPFILE); \
+ cd $(TMPDIR)/current; \
+ $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude \
+ "privoxy-suse.spec" -czf $(TMPDIR)/$(PROGRAM)-rh-$(VERSION).tar.gz .; \
+ $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude \
+ "privoxy-rh.spec" -czf $(TMPDIR)/$(PROGRAM)-suse-$(VERSION).tar.gz .
+ @$(MV) -f $(TMPDIR)/$(PROGRAM)-rh-$(VERSION).tar.gz .
+ @$(MV) -f $(TMPDIR)/$(PROGRAM)-suse-$(VERSION).tar.gz .
+ @$(RM) -rf $(TMPDIR)
+ @echo "Resulting files are $(PROGRAM)-rh-$(VERSION).tar.gz and"
+ @echo " $(PROGRAM)-suse-$(VERSION).tar.gz"
+
+
+#############################################################################
+# looks at the version of Makefile and exports a corresponding source-tree
+# example: if the Makefile has the sticky tag v_2_9_13, you'll get
+# privoxy-*-2.4.13.tar.gz. Two different tar files will be written, one for
+# Red Hat and one for SuSe (different spec-files)
+#############################################################################
+create-archive:
+ make SNAPVERSION=$(SNAPVERSION) create-snapshot
+
+
+#############################################################################
+# RPM specific stuff (SuSE or Redhat, ..)
#############################################################################
rpm-stuff: dist-check clean clobber
for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
tarball-clean:
$(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
+#############################################################################
+# java Activity Console
+#############################################################################
+java-activity-console:
+ javac -classpath $(DIR_PRIVOXY_SRC_JAVA):$(CLASSPATH) $(DIR_PRIVOXY_SRC)/java/org/privoxy/activityconsole/*.java
+ jar -cvfm ActivityConsole.jar $(DIR_PRIVOXY_SRC_JAVA)/org/privoxy/activityconsole/acon.manifest -C $(DIR_PRIVOXY_SRC_JAVA) org/privoxy/activityconsole
+
#############################################################################
#
# Documentation
@$(ECHO) it will not remove obsolete documents.
@$(ECHO) -------------------------------------------------------
- @$(ECHO) Uploading
+ @$(ECHO) Uploading html
@cd doc/webserver; \
upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
$(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
+ @$(ECHO) Uploading pdf
+ @cd doc/pdf;\
+ zip privoxy-pdf-docs *.pdf ;\
+ scp -q privoxy-pdf-docs.zip ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/pdf
+
@$(ECHO) Fixing permissions
@ssh ijbswa.sourceforge.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true'
@ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
$(CC) -o $(DIR_PRIVOXY_SRC_PCRE)/dftables@EXEEXT@ $(CFLAGS) $(DIR_PRIVOXY_SRC_PCRE)/dftables.c
# Win32
-$(DIR_PRIVOXY_OBJ)/w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
-$(DIR_PRIVOXY_OBJ)/w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
-$(DIR_PRIVOXY_OBJ)/win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h pcrs.h project.h w32log.h win32.h
+$(DIR_PRIVOXY_OBJ)/w32log.@OBJEXT@: $(DIR_PRIVOXY_SRC)/config.h $(DIR_PRIVOXY_SRC)/errlog.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/miscutil.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/project.h $(DIR_PRIVOXY_SRC)/w32log.c $(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/w32taskbar.h $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h
+$(DIR_PRIVOXY_OBJ)/win32.@OBJEXT@: $(DIR_PRIVOXY_SRC)/config.h $(DIR_PRIVOXY_SRC)/jcc.h $(DIR_PRIVOXY_SRC)/loadcfg.h $(DIR_PRIVOXY_SRC)/pcrs.h $(DIR_PRIVOXY_SRC)/project.h $(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/win32.c $(DIR_PRIVOXY_SRC)/win32.h $(DIR_PRIVOXY_SRC_PCRE)/pcre.h $(DIR_PRIVOXY_SRC_PCRE)/pcreposix.h
+$(DIR_PRIVOXY_OBJ)/w32taskbar.@OBJEXT@: $(DIR_PRIVOXY_SRC)/config.h $(DIR_PRIVOXY_SRC)/w32log.h $(DIR_PRIVOXY_SRC)/w32taskbar.c $(DIR_PRIVOXY_SRC)/w32taskbar.h
$(DIR_PRIVOXY_OBJ)/w32res.res: $(DIR_PRIVOXY_SRC)/w32res.rc \
$(DIR_PRIVOXY_SRC)/w32res.h \
$(RM) `find . -name ".\#*"`
clobber: tidy
- $(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \
+ $(RM) GNUmakefile configure src/config.h.in src/config.h config.cache config.status config.log logfile \
privoxy.log core *.tar.gz *.tar privoxy-cl.spec $(DOC_DIR)/ldp.dsl \
$(DOC_DIR)/GNUmakefile
tags: $(SRCS) $(HDRS)
etags $(SRCS) $(HDRS)
-install: all
- #
- # FIXME: This is a dirty hack to have an install target
- # that works at least for some setups. This needs
- # to be fixed!
- #
- $(STRIP_PROG) $(PROGRAM)
- $(INSTALL) $(INSTALL_D) $(SBIN_DEST)
- $(INSTALL) $(INSTALL_D) $(DEST)/user-manual
- $(INSTALL) $(INSTALL_D) $(CONFDEST)/templates
- $(INSTALL) $(INSTALL_D) $(DEST)/$(DOK_WEB_USEM)
- $(INSTALL) $(INSTALL_P) $(PROGRAM) $(SBIN_DEST)
- if [ -d "$(DOK_WEB_USEM)" ]; then $(INSTALL) $(INSTALL_T) $(DOK_WEB_USEM)/[a-z]* $(DEST)/$(DOK_WEB_USEM); fi
- $(INSTALL) $(INSTALL_T) templates/[a-z]* $(CONFDEST)/templates
- $(INSTALL) $(INSTALL_T) config default.action default.filter trust $(CONFDEST)
- # FIXME $(ECHO) privoxy.logrotate privoxy.monthly privoxy.weekly
- # FIXME: Need new manual! $(GZIP_PROG) -c privoxy.1 > $(MAN_DEST)/privoxy.1.gz
- $(INSTALL) $(INSTALL_P) privoxy.init /etc/init.d/privoxy
+CONF_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(CONF_BASE)" = "$(prefix)/etc" ];then \
+ $(ECHO) "$(CONF_BASE)/privoxy";\
+ else\
+ $(ECHO) "$(CONF_BASE)";\
+ fi)
+
+LOG_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(LOGS_DEST)" = "$(prefix)/var/log/privoxy" ];then \
+ $(ECHO) "/var/log/privoxy" ;\
+ else\
+ $(ECHO) "$(LOGS_DEST)";\
+ fi)
+
+PID_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(PIDS_DEST)" = "$(prefix)/var/run" ];then \
+ $(ECHO) "/var/run" ;\
+ else\
+ $(ECHO) "$(PIDS_DEST)";\
+ fi)
+
+check_doc:=$(shell if [ ! -d "$(SHARE_DEST)/doc" ] && [ "$(prefix)" = "/usr/local" ] && [ -d "$(prefix)/doc" ];then \
+ $(ECHO) "1";\
+ else\
+ $(ECHO) "0";\
+ fi)
+
+# If USER is specified but no GROUP, assume there is a GROUP of same name.
+GROUP_T:=$(shell if [ x$(GROUP) = x ] && [ x$(USER) != x ];then \
+ $(ECHO) "$(USER)" ;\
+ else\
+ $(ECHO) "$(GROUP)";\
+ fi)
+
+install-strip:
+ $(MAKE) install STRIP=-s
+
+# FIXME: Test USER and GROUP on Slack to make sure this works as
+# intended.
+#
+# FIXME: id handling needs help, probably via configure, since 'id -u' is not
+# universally reliable (eg Solaris). Group handling could be better.
+# Perhaps the whole user/group validation should be done here, and simplified.
+PROGRAM_V = Privoxy $(VERSION)
+install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T
+ @# Quick test for valid USER.
+ @if [ -n "$(USER)" ]; then \
+ $(ID) $(USER) >/dev/null || exit 1;\
+ fi
+ @# Test for valid group. FIXME. USER does not have to belong to GROUP
+ @# for file ownership purposes.
+# if [ -n "$(GROUP_T)" ] && [ -n "$(USER)" ] && ! $(GROUPS) $(USER) | $(GREP) "\<$(GROUP_T)\>" >/dev/null; then \
+# $(ECHO) Group $(GROUP_T) for User $(USER) is invalid && exit 1 ;\
+# fi
+
+ @$(ECHO) "Creating directories, and preparing $(PROGRAM_V) installation"
+ $(CHMOD) $(DIR_MODE) $(MKDIR)
+ @$(MKDIR) $(SBIN_DEST) $(prefix) $(CONF_DEST) $(CONF_DEST)/templates $(SHARE_DEST) \
+ $(LOG_DEST) $(PID_DEST)
+ @# Install the executable binary, strip if invoked as install-strip
+ @test -n "$(STRIP)" &&\
+ $(ECHO) Installing $(PROGRAM) stripped executable to $(SBIN_DEST) ||\
+ $(ECHO) Installing $(PROGRAM) executable to $(SBIN_DEST)
+ $(INSTALL) $(INSTALL_P) $(STRIP) $(PROGRAM) $(SBIN_DEST)
+
+ @# Install the DOCS and man page. install-sh only does one file at a time.
+ -@if [ $(check_doc) = 0 ]; then \
+ DOC=$(DOC_DEST) ;\
+ else \
+ DOC=$(prefix)/doc/privoxy ;\
+ fi;\
+ $(MKDIR) $$DOC $$DOC/user-manual $$DOC/faq $$DOC/developer-manual \
+ $$DOC/man-page $$DOC/images $(MAN_DEST) ;\
+ if [ -d "$(DOK_WEB)" ]; then \
+ $(ECHO) Installing FAQ, Manual, and other docs to $$DOC;\
+ for i in user-manual developer-manual faq; do \
+ for ii in $(DOK_WEB)/$$i/*html; do \
+ $(INSTALL) $(INSTALL_T) $$ii $$DOC/$$i;\
+ done ;\
+ done ;\
+ for i in $(DOK_WEB)/images/*jpg; do \
+ $(INSTALL) $(INSTALL_T) $$i $$DOC/images;\
+ done ;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/man-page/*html $$DOC/man-page;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/privoxy-index.html $$DOC/index.html;\
+ $(INSTALL) $(INSTALL_T) AUTHORS $$DOC;\
+ $(INSTALL) $(INSTALL_T) LICENSE $$DOC;\
+ $(INSTALL) $(INSTALL_T) README $$DOC;\
+ $(INSTALL) $(INSTALL_T) ChangeLog $$DOC;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $$DOC;\
+ fi
+ @# Not all platforms support gzipped man pages.
+ @$(ECHO) Installing man page to $(MAN_DEST)/privoxy.1
+ -$(INSTALL) $(INSTALL_T) privoxy.1 $(MAN_DEST)/privoxy.1
+
+ @# Change the config file default directories according to the configured ones
+ @$(ECHO) Rewriting config for this installation
+ @if [ -f config.base ] ; then \
+ $(CAT) config >config~ ;\
+ $(MV) config.base config ;\
+ fi
+ $(SED) 's+confdir .+confdir $(CONF_DEST)+' config | \
+ $(SED) 's+logdir .+logdir $(LOG_DEST)+' >config.updated
+ $(MV) config config.base
+ $(MV) config.updated config
+
+ @# Install the config support files. Test for root install, and abort
+ @# if there is no privoxy user, and no other user or group was enabled
+ @# during configure.
+ @$(ECHO) Installing templates to $(CONF_DEST)/templates
+ @for i in `find templates -type f`; do \
+ $(INSTALL) $(INSTALL_T) $$i $(CONF_DEST)/templates ;\
+ done
+
+ @# FIXME: group/user validation is overly convoluted.
+ @# If superuser install ... we require a minimum of group ownership
+ @# of those files the daemon writes to, to be non-root owned.
+ @if [ "`$(ID) |sed 's/(.*//' |sed 's/.*=//'`" = "0" ] ;then\
+ if [ x$(USER) = x ] || [ $(USER) = root ]; then \
+ if [ x$(GROUP) = x ] || [ $(GROUP) = root ]; then \
+ if [ "`$(ID) privoxy`" ] && \
+ $(GROUPS) privoxy | $(SED) 's/^.*://' |$(GREP) "\<privoxy\>" >/dev/null; then \
+ $(ECHO) "Warning: Setting group owner to privoxy";\
+ GROUP_T=privoxy ;\
+ else \
+ $(ECHO) "******************************************************************" ;\
+ $(ECHO) " WARNING! WARNING! installing config files as root!" ;\
+ $(ECHO) " It is strongly recommended to run $(PROGRAM) as a non-root user," ;\
+ $(ECHO) " and to install the config files as that user and/or group!" ;\
+ $(ECHO) " Please read INSTALL, and create a privoxy user and group!" ;\
+ $(ECHO) "*******************************************************************" ;\
+ exit 1 ;\
+ fi ;\
+ else \
+ GROUP_T=$(GROUP) ;\
+ fi ;\
+ INSTALL_CONF="$(INSTALL_R) -g $$GROUP_T " ;\
+ else \
+ $(ECHO) "Superuser install, installing config files as $(USER):$(GROUP_T)" ;\
+ INSTALL_CONF="$(INSTALL_R) -o $(USER) -g $(GROUP_T)" ;\
+ GROUP_T=$(GROUP_T) ;\
+ fi ;\
+ else \
+ if [ ! "`id $(USER)`" = "`id`" ] ;then \
+ $(ECHO) "** WARNING ** current install user different from configured user!!" ;\
+ $(ECHO) "Edit may fail." ;\
+ fi ;\
+ INSTALL_CONF="$(INSTALL_R)" ;\
+ fi ;\
+ $(ECHO) Installing configuration files to $(CONF_DEST);\
+ for i in $(CONFIGS); do \
+ if [ -s "$(CONF_DEST)/$$i" ] ; then \
+ $(ECHO) Installing $$i as $$i.new ;\
+ $(INSTALL) $$INSTALL_CONF $$i $(CONF_DEST)/$$i.new || exit 1;\
+ NEW=1;\
+ else \
+ $(INSTALL) $$INSTALL_CONF $$i $(CONF_DEST) || exit 1;\
+ fi ;\
+ done ;\
+ if [ -n "$$NEW" ]; then \
+ $(CHMOD) $(RWD_MODE) $(CONF_DEST)/*.new || exit 1 ;\
+ $(ECHO) "Warning: Older config files are preserved. Check new versions for changes!" ;\
+ fi ;\
+ [ ! -f $(LOG_DEST)/logfile ] && $(ECHO) Creating logfiles in $(LOG_DEST) || \
+ $(ECHO) Checking logfiles in $(LOG_DEST) ;\
+ $(TOUCH) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || exit 1 ;\
+ if [ x$$USER != x ]; then \
+ $(CHOWN) $$USER $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || \
+ $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
+ fi ;\
+ if [ x$$GROUP_T != x ]; then \
+ $(CHGRP) $$GROUP_T $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || \
+ $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
+ fi ;\
+ $(CHMOD) $(RWD_MODE) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || exit 1 ;\
+ if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
+ if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
+ $(SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \
+ $(SED) 's+%SBIN_DEST%+$(SBIN_DEST)+' | \
+ $(SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \
+ $(SED) 's+%USER%+$$USER+' | \
+ $(SED) 's+%GROUP%+$(GROUP_T)+' >slackware/rc.privoxy ;\
+ $(INSTALL) $(INSTALL_P) slackware/rc.privoxy /etc/rc.d/ ;\
+ $(ECHO) "Installing for Slackware." ;\
+ $(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\
+ elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
+ $(ECHO) "Installing init script to /etc/rc.d/init.d/privoxy" ;\
+ $(SED) 's,^PRIVOXY_BIN=.*,PRIVOXY_BIN="/usr/local/sbin/$(PROGRAM)",' privoxy.init |\
+ $(SED) 's,^PRIVOXY_CONF=.*,PRIVOXY_CONF="$(CONF_DEST)/config",' |\
+ $(SED) "s,^PRIVOXY_USER=.*,PRIVOXY_USER=$$USER," > init.tmp ;\
+ $(INSTALL) $(INSTALL_P) init.tmp /etc/rc.d/init.d/privoxy && $(RM) init.tmp;\
+ $(MKDIR) /etc/logrotate.d/ ;\
+ $(ECHO) "Installing logrotate script to /etc/logrotate.d/" ;\
+ $(INSTALL) -m 0644 privoxy.logrotate /etc/logrotate.d/privoxy ;\
+ elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
+ $(ECHO) "Installing generic init script to /etc/init.d/privoxy" ;\
+ $(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\
+ $(INSTALL) $(INSTALL_P) privoxy-generic.init /etc/init.d/privoxy ;\
+ fi ;\
+ else \
+ $(ECHO) "No init script installed, install it manually if needed" ;\
+ fi
+ @# mmmmm, good.
+ @$(ECHO) "$(PROGRAM_V) installation succeeded!"
+ @$(ECHO) "The Privoxy configuration files have been installed in $(CONF_DEST)"
+
+# rmdir is used as a precaution since it will not remove non-empty
+# directories. RH init script creates lock file and pid file.
+uninstall: CONF_DEST LOG_DEST PID_DEST check_doc
+ @$(ECHO) Starting Privoxy uninstallation
+ @# KILL privoxy if running
+ -@if [ -f /etc/redhat-release ] && [ -x /etc/rc.d/init.d/privoxy ]; then \
+ /etc/rc.d/init.d/privoxy stop >/dev/null 2>/dev/null ;\
+ chkconfig --del $(PROGRAM) 2>/dev/null;\
+ fi
+ -@test -f $(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
+ $(KILL) `$(CAT) $(PID_DEST)/privoxy.pid` || :
+ -@test -f /var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
+ $(KILL) `$(CAT) /var/run/privoxy.pid ` || :
+
+ @# Program binary
+ @$(ECHO) Removing $(PROGRAM) binary
+ $(RM) $(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~
+
+ @# config files and dir, and maybe old install backups
+ -@if [ -d $(CONF_DEST) ]; then \
+ $(ECHO) Saving $(PROGRAM) config files to /tmp/$(PROGRAM)-save ;\
+ $(MKDIR) /tmp/$(PROGRAM)-save ;\
+ cd $(CONF_DEST) ;\
+ for i in $(CONFIGS); do \
+ [ -f $$i ] && $(CP) $$i /tmp/$(PROGRAM)-save ;\
+ done ;\
+ fi
+ @$(ECHO) Removing $(PROGRAM) config files
+ -@for i in $(CONFIGS); do \
+ test -f $(CONF_DEST)/$$i && $(ECHO) Removing $$i ;\
+ $(RM) $(CONF_DEST)/$$i $(CONF_DEST)/$$i~ $(CONF_DEST)/$$i.new ;\
+ done
+ -@test -d $(CONF_DEST)/templates && $(RM) -r $(CONF_DEST)/templates &&\
+ $(ECHO) "Removing $(CONF_DEST)/templates/*"
+
+ @# man page and docs
+ @$(ECHO) Removing $(PROGRAM) docs
+ -$(RM) $(MAN_DEST)/privoxy.1*
+ -$(RM) -r $(DOC_DEST) || $(RM) -r $(prefix)/doc/privoxy
+
+ @# Log and jarfile and pidfile
+ @$(ECHO) Removing $(PROGRAM) logs
+ -$(RM) $(LOG_DEST)/logfile $(PID_DEST)/privoxy.pid $(LOG_DEST)/jarfile
+
+ @# Final clean up of unused directories. Special handling of CONF and LOG
+ # destinations.
+ @$(ECHO) Removing $(PROGRAM) directories
+ @for i in $(LOG_DEST) $(CONF_DEST); do \
+ if test -d $$i; then \
+ $(ECHO) Removing $$i ;\
+ $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
+ fi;\
+ done
+ @if [ ! "$(prefix)" = "/usr/local" ] ;then \
+ for i in $(MAN_DEST) $(MAN_DIR) $(SHARE_DEST)/doc $(SHARE_DEST) $(SBIN_DEST); do \
+ if test -d $$i; then \
+ $(ECHO) Removing $$i ;\
+ $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
+ fi;\
+ done;\
+ if test $(LOG_DEST) != /var/log/privoxy && test -d $(prefix)/var/log; then \
+ $(ECHO) Removing $(prefix)/var/log ;\
+ $(RMDIR) $(prefix)/var/log || $(ECHO) "$(prefix)/var/log is not empty, not removed";\
+ fi ;\
+ if test $(PID_DEST) != /var/run && test -d $(prefix)/var/run; then \
+ $(ECHO) Removing $(prefix)/var/run ;\
+ $(RMDIR) $(prefix)/var/run || $(ECHO) "$(prefix)/var/run is not empty, not removed";\
+ fi ;\
+ if test $(prefix)/var != /var && test -d $(prefix)/var; then \
+ $(ECHO) Removing $(prefix)/var ;\
+ $(RMDIR) $(prefix)/var || $(ECHO) "$(prefix)/var is not empty, not removed" ;\
+ fi ;\
+ if test $(prefix) != / && test $(prefix) != /usr && test -d $(prefix); then \
+ $(ECHO) Removing $(prefix) ;\
+ $(ECHO) Removing installation directory $(prefix) ;\
+ $(RMDIR) $(prefix) || $(ECHO) "$(prefix) is not empty, not removed" ;\
+ fi;\
+ fi
+
+ @# init scripts and logrotate
+ @if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
+ $(ECHO) Removing $(PROGRAM) init script ;\
+ if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
+ $(RM) /etc/rc.d/rc.privoxy ;\
+ elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
+ $(RM) /etc/rc.d/init.d/privoxy /etc/logrotate.d/privoxy;\
+ elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
+ $(RM) /etc/init.d/privoxy ;\
+ else \
+ $(ECHO) "Unable to remove privoxy init script, not installed or permission denied" ;\
+ fi ;\
+ fi
+ @$(ECHO) Privoxy uninstalled, bye
coffee:
@perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,101,0,109,143,205,13,192,32,8,133,\
## end:
# $Log: GNUmakefile.in,v $
+# Revision 1.136 2002/12/28 04:10:21 david__schmidt
+# Initial drop of dashboard instrumentation - enabled with
+# --enable-activity-console
+#
+# Revision 1.135 2002/11/04 05:11:05 hal9
+# Just a clean up of overly verbose output from install/uninstall.
+#
+# Revision 1.134 2002/10/28 06:01:39 hal9
+# Make uninstall: cp -v problems on SF Solaris.
+#
+# Revision 1.133 2002/10/28 02:12:22 hal9
+# Make install/uninstall:
+# - More cleanup of variables
+# - Make the minimum requirement for root install, an available non-root GROUP.
+# If a privoxy user exists (and no other USER is specified), then the files
+# that require write access are installed as group owned by privoxy. FIXME:
+# There has to be a cleaner way to do this.
+# - Uninstall now saves configuration files to /tmp.
+#
+# Revision 1.132 2002/10/24 22:24:58 hal9
+# Make install: Minor clean up for variable handling.
+#
+# Revision 1.131 2002/10/23 07:00:21 agotneja
+# added a chmod on mkinstalldirs just before using it, otherwise it
+# will fail when running make for the first time.
+#
+# Revision 1.130 2002/10/22 05:49:14 hal9
+# Make install:
+# - /bin/sh on Solaris does not handle: ! test.
+# - Remove some unused doc variables.
+# - Make configs group writable.
+#
+# Revision 1.129 2002/10/20 07:15:12 hal9
+# Getting near the end (I hope) of install target updates:
+# - Rewrite RH init script to reflect configured values.
+# - Test for USER=root as well as UID=0
+# - Test for invalid group (probably needs more work).
+# - Add /usr to /usr/local test for when to install init scripts, etc.
+# - More testing on previous changes.
+#
+# Revision 1.128 2002/10/18 05:36:32 hal9
+# More install target fixes:
+# - Quick fix of log ownership on root install (lightly tested). If this goes
+# true to form, then the fix will break something else :(
+# - Fix what looks like was invalid user on Slack if root install and
+# we use an existing privoxy user. No way to test this.
+# See FIXMEs.
+#
+# Revision 1.127 2002/10/18 00:58:07 hal9
+# More install/uninstall/install-strip updates:
+# - Don't install gzipped man page (Solaris again).
+# - Don't overwrite existing config files, and install new versions as *.new.
+# Fix permissions/ownership here too.
+# - Better testing before removing directories.
+# - Some better messages during install, ie 'Preserving configs', etc.
+# - Better handling of install-strip to fix previous problem of trying to strip
+# init scripts.
+# - Crude test for valid USER in case is set on command line.
+# - Force immediate exit on some errors (eg invalid group).
+#
+# Revision 1.126 2002/10/16 05:38:00 hal9
+# More make install/uninstall updates:
+# -Make compatible with install-sh with does not support -b flag, and can only
+# handle one file at a time (sigh).
+# -Manually save existing config files, if they exist.
+# -Fix install-strip so does not try to strip init scripts.
+#
+# Revision 1.125 2002/10/15 05:53:34 hal9
+# A few more cleanups:
+# -use mkinstalldirs consistently.
+# -Install init script and logrotate only is prefix=/usr/local (installed to
+# system dir /etc instead of /usr/local...)
+# -Test for directory existence before removing to avoid misleading error
+# messages.
+#
+# Revision 1.124 2002/10/13 19:58:09 hal9
+# Hopefully, this is final updates for install and uninstall targets.
+# - Fix typo in chown syntax
+# - chmod on mkinstalldirs to make it executable (is there a better way?).
+# - Cleanup comments, and revert most of previous output cleanup changes.
+# - Include all HTML docs, since there are cross links between these.
+# - Improved group handling (still some potential problems, see FIXME).
+# - Update PHONY targets.
+# - Uninstall was not removing CONF and LOG destinations in some situations.
+# - Various other minor cleanups.
+#
+# Revision 1.123 2002/10/12 06:05:41 hal9
+# WIP: This is mostly to fix various problems encountered on SF CF Solaris
+# servers for the install target only. This did not handle /[^C]*, test -e, not
+# quoting within tests (ie [ `id $(USER)` = `id` ] needs quoting) in some
+# situations, and does not support id -u (with the id in $PATH, but there is
+# another...). Also, cleaned up output. Needs testing. I am unable to test the
+# root install stuff either. It installs now at least (not tested further).
+# A few other nits.
+#
+# Revision 1.122 2002/10/11 06:03:08 hal9
+# Really install FAQ this time, and not u-m in two locations. Include images
+# for u-m.
+#
+# Revision 1.120 2002/10/10 20:39:27 dessent
+#
+#
+# Fixes for Win32 GUI build (added "$(DIR_PRIVOXY_SRC)/" to dependencies list)
+#
+# Revision 1.119 2002/09/23 03:42:41 hal9
+# This is higuita's make install/uninstall patch. Needs testing please!!!
+#
+# Revision 1.118 2002/09/11 08:22:37 oes
+# Fixed path (C_HDRS are in src/ now)
+#
+# Revision 1.117 2002/09/06 23:33:35 hal9
+# Fix clobber for config.h and config.h.in are in src now.
+#
+# Revision 1.116 2002/09/06 05:22:57 hal9
+# Adapt make webserver target to 3.0 for pdf uploading.
+#
+# Revision 1.115 2002/09/05 19:13:04 hal9
+# Migrate Karstens make snapshot stuff (not tested).
+#
+# Revision 1.114 2002/09/05 11:58:30 oes
+# Synced in some changes fromm the stable branch:
+# From Revision 1.104.2.14 2002/08/10 11:19:37 oes:
+# - Add dependency: pcrs.o deps on config.h
+# Revision 1.104.2.9 2002/07/26 15:17:02 oes
+# - Added generation of default.action from defaul.action.master
+# - Deleted obsolete re_filterfile.txt generation
+#
# Revision 1.113 2002/07/30 21:50:25 hal9
# Add redhat-test target, and migrate the RPM_PACKAGEV stuff from 3.0 branch.
#
projects / privoxy.git / blobdiff