# Note: Makefile is built automatically from Makefile.in
#
-# $Id: GNUmakefile.in,v 1.131 2002/10/23 07:00:21 agotneja Exp $
+# $Id: GNUmakefile.in,v 1.134 2002/10/28 06:01:39 hal9 Exp $
#
# Written by and Copyright (C) 2001 the SourceForge
# Privoxy team. http://www.privoxy.org/
DIR_PRIVOXY_OBJ := $(DIR_PRIVOXY_ROOT)/obj
#############################################################################
-# "make install" directories and variables
+# "make install" settings
#############################################################################
+# User and Group settings
+USER = @USER@
+GROUP = @GROUP@
+
+# PATHS set from configure
prefix = @prefix@
exec_prefix = @exec_prefix@
CONF_BASE = @sysconfdir@
# finally if $prefix=/usr/local and VAR_DEST=$prefix/var it
# changes this to /var for storing the logs and pidfile
-# used in source dir only, the install goes to $share_dest/doc/privoxy
-DOK_WEB = doc/webserver/
+# Where to find docs. The install goes to $share_dest/doc/privoxy.
+DOK_WEB = doc/webserver/
-#############################################################################
-# Build tools
-#############################################################################
-
-PROGRAM = privoxy@EXEEXT@
-CC = @CC@
-ECHO = echo
-GZIP_PROG = gzip
# Install usage should be compatible with install-sh.
INSTALL = @INSTALL@
-# Binaries
+
+# Permissions used during installation.
+# Binaries (daemon, init scripts)
BIN_MODE = 0755
-# Support files, docs, etc.
-RA_MODE = 0664
+# Files daemon writes to: *action, trust and logs.
+RWD_MODE = 0660
+# Misc files, docs, etc.
+RA_MODE = 0664
# Directory
DIR_MODE = 0755
-# Files daemon writes to.
-RWD_MODE = 0660
+
INSTALL_P = -m $(BIN_MODE)
INSTALL_T = -m $(RA_MODE)
INSTALL_D = -m $(DIR_MODE) -d
INSTALL_R = -m $(RWD_MODE)
-
# install options for superuser install
-#INSTALL_S = -g @GROUP@ -o @USER@
+#INSTALL_S = -g -o
+
+#############################################################################
+# Build and Install tools
+#############################################################################
+
+PROGRAM = privoxy@EXEEXT@
+CC = @CC@
+ECHO = echo
+GZIP_PROG = gzip
# id -u is not universal. FIXME: need to set from configure. Breaks on
# Solaris.
#ID = id -u
+ID = id
LD = @CC@
RM = rm -f
RMDIR = rmdir
MKDIR = ./mkinstalldirs
STRIP_PROG = strip
+CP = cp -f
SED = sed
GREP = grep
CAT = cat
KILL = kill
CHMOD = chmod
CHOWN = chown
+CHGRP = chgrp
+GROUPS = groups
DOC_STATUS = @DOC_STATUS@
# Note: Please make sure that -d ldp.dsl\#html stays the last option to
# $(JADEBIN), because for some targets "-notoc" will be appended
PERL = perl
DOC_DIR = doc/source
-#User Group paras
-USER = @USER@
-GROUP = @GROUP@
-
# Program to do LF->CRLF
#
# The sed version should be the most portable, but it doesn't work for me,
#DOSFILTER = $(SED) -e $$'s,$$,\r,'
#DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
DOSFILTER = $(PERL) -p -e 's/\n/\r\n/'
+CVSROOT = :pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa
+TMPDIR := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX)
#############################################################################
# Setup for make distribution rh and suse for now
#
# FIXME: id handling needs help, probably via configure, since 'id -u' is not
# universally reliable (eg Solaris). Group handling could be better.
-# Perhaps the whole user/group validation should be done here.
+# Perhaps the whole user/group validation should be done here, and simplified.
PROGRAM_V = Privoxy $(VERSION)
install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T
- # Quick test for valid USER.
- if [ -n "$(USER)" ]; then \
- id $(USER) >/dev/null || exit 1;\
- fi
- # Test for valid group.
- if [ -n "$(GROUP_T)" ] && [ -n "$(USER)" ] && ! groups $(USER) | $(GREP) "\<$(GROUP_T)\>" >/dev/null; then \
- $(ECHO) Group $(GROUP_T) for User $(USER) is invalid && exit 1 ;\
+ @# Quick test for valid USER.
+ @if [ -n "$(USER)" ]; then \
+ $(ID) $(USER) >/dev/null || exit 1;\
fi
+ @# Test for valid group. FIXME. USER does not have to belong to GROUP
+ @# for file ownership purposes.
+# if [ -n "$(GROUP_T)" ] && [ -n "$(USER)" ] && ! $(GROUPS) $(USER) | $(GREP) "\<$(GROUP_T)\>" >/dev/null; then \
+# $(ECHO) Group $(GROUP_T) for User $(USER) is invalid && exit 1 ;\
+# fi
- $(ECHO) "Creating directories, and preparing $(PROGRAM_V) installation"
+ @$(ECHO) "Creating directories, and preparing $(PROGRAM_V) installation"
$(CHMOD) $(DIR_MODE) $(MKDIR)
- $(MKDIR) $(SBIN_DEST) $(prefix) $(CONF_DEST) $(CONF_DEST)/templates $(SHARE_DEST) \
+ @$(MKDIR) $(SBIN_DEST) $(prefix) $(CONF_DEST) $(CONF_DEST)/templates $(SHARE_DEST) \
$(LOG_DEST) $(PID_DEST)
- # Install the executable binary, strip if invoked as install-strip
- test -n "$(STRIP)" &&\
+ @# Install the executable binary, strip if invoked as install-strip
+ @test -n "$(STRIP)" &&\
$(ECHO) Installing $(PROGRAM) stripped executable to $(SBIN_DEST) ||\
$(ECHO) Installing $(PROGRAM) executable to $(SBIN_DEST)
$(INSTALL) $(INSTALL_P) $(STRIP) $(PROGRAM) $(SBIN_DEST)
- # Install the DOCS and man page
- -if [ $(check_doc) = 0 ]; then \
+ @# Install the DOCS and man page. install-sh only does one file at a time.
+ -@if [ $(check_doc) = 0 ]; then \
DOC=$(DOC_DEST) ;\
else \
DOC=$(prefix)/doc/privoxy ;\
$(INSTALL) $(INSTALL_T) ChangeLog $$DOC;\
$(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $$DOC;\
fi
- # Not all platforms support gzipped man pages.
- $(ECHO) Installing man page to $(MAN_DEST)/privoxy.1
+ @# Not all platforms support gzipped man pages.
+ @$(ECHO) Installing man page to $(MAN_DEST)/privoxy.1
-$(INSTALL) $(INSTALL_T) privoxy.1 $(MAN_DEST)/privoxy.1
- # Change the config file default directories according to the configured ones
- $(ECHO) Rewriting config for this installation
- if [ -f config.base ] ; then \
+ @# Change the config file default directories according to the configured ones
+ @$(ECHO) Rewriting config for this installation
+ @if [ -f config.base ] ; then \
$(CAT) config >config~ ;\
$(MV) config.base config ;\
fi
$(MV) config config.base
$(MV) config.updated config
- # Install the config support files. Test for root install, and abort
- # if there is no privoxy user, and no other user was enabled during
- # configure. Later, install init script if appropriate.
- $(ECHO) Installing templates to $(CONF_DEST)/templates
- for i in `find templates -type f`; do \
+ @# Install the config support files. Test for root install, and abort
+ @# if there is no privoxy user, and no other user or group was enabled
+ @# during configure.
+ @$(ECHO) Installing templates to $(CONF_DEST)/templates
+ @for i in `find templates -type f`; do \
$(INSTALL) $(INSTALL_T) $$i $(CONF_DEST)/templates ;\
done
- if [ "`id |sed 's/(.*//' |sed 's/.*=//'`" = "0" ] ;then\
+ @# FIXME: group/user validation is overly convoluted.
+ @# If superuser install ... we require a minimum of group ownership
+ @# of those files the daemon writes to, to be non-root owned.
+ @if [ "`$(ID) |sed 's/(.*//' |sed 's/.*=//'`" = "0" ] ;then\
if [ x$(USER) = x ] || [ $(USER) = root ]; then \
- if [ "`id privoxy`" ]; then \
- $(ECHO) "Warning: Setting user and group to privoxy";\
- INSTALL_CONF="$(INSTALL_T) -g privoxy -o privoxy" ;\
- USER=privoxy ;\
- GROUP_T=privoxy ;\
+ if [ x$(GROUP) = x ] || [ $(GROUP) = root ]; then \
+ if [ "`$(ID) privoxy`" ] && \
+ $(GROUPS) privoxy | $(SED) 's/^.*://' |$(GREP) "\<privoxy\>" >/dev/null; then \
+ $(ECHO) "Warning: Setting group owner to privoxy";\
+ GROUP_T=privoxy ;\
+ else \
+ $(ECHO) "******************************************************************" ;\
+ $(ECHO) " WARNING! WARNING! installing config files as root!" ;\
+ $(ECHO) " It is strongly recommended to run $(PROGRAM) as a non-root user," ;\
+ $(ECHO) " and to install the config files as that user and/or group!" ;\
+ $(ECHO) " Please read INSTALL, and create a privoxy user and group!" ;\
+ $(ECHO) "*******************************************************************" ;\
+ exit 1 ;\
+ fi ;\
else \
- $(ECHO) "******************************************************************" ;\
- $(ECHO) " WARNING! WARNING! installing config files as root!" ;\
- $(ECHO) " It is strongly recommended to run $(PROGRAM) as non-root user," ;\
- $(ECHO) " and to install the config files as that user!" ;\
- $(ECHO) " Please read INSTALL, and create a privoxy user!" ;\
- $(ECHO) "*******************************************************************" ;\
- exit 1 ;\
+ GROUP_T=$(GROUP) ;\
fi ;\
+ INSTALL_CONF="$(INSTALL_R) -g $$GROUP_T " ;\
else \
$(ECHO) "Superuser install, installing config files as $(USER):$(GROUP_T)" ;\
- INSTALL_CONF="$(INSTALL_T) -o $(USER) -g $(GROUP_T)" ;\
+ INSTALL_CONF="$(INSTALL_R) -o $(USER) -g $(GROUP_T)" ;\
+ GROUP_T=$(GROUP_T) ;\
fi ;\
else \
if [ ! "`id $(USER)`" = "`id`" ] ;then \
$(ECHO) "** WARNING ** current install user different from configured user!!" ;\
$(ECHO) "Edit may fail." ;\
fi ;\
- INSTALL_CONF="$(INSTALL_T)" ;\
+ INSTALL_CONF="$(INSTALL_R)" ;\
fi ;\
$(ECHO) Installing configuration files to $(CONF_DEST);\
for i in $(CONFIGS); do \
if [ -s "$(CONF_DEST)/$$i" ] ; then \
$(ECHO) Installing $$i as $$i.new ;\
- $(INSTALL) $(INSTALL_R) $$i $(CONF_DEST)/$$i.new || exit 1;\
+ $(INSTALL) $$INSTALL_CONF $$i $(CONF_DEST)/$$i.new || exit 1;\
NEW=1;\
else \
- if test "$$i" = "config" || test "$$i" = "default.filter"; then \
- $(INSTALL) $(INSTALL_R) $$i $(CONF_DEST) || exit 1;\
- else \
- $(INSTALL) $(INSTALL_R) $$INSTALL_CONF $$i $(CONF_DEST) || exit 1;\
- fi;\
+ $(INSTALL) $$INSTALL_CONF $$i $(CONF_DEST) || exit 1;\
fi ;\
done ;\
if [ -n "$$NEW" ]; then \
fi ;\
[ ! -f $(LOG_DEST)/logfile ] && $(ECHO) Creating logfiles in $(LOG_DEST) || \
$(ECHO) Checking logfiles in $(LOG_DEST) ;\
- $(TOUCH) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || exit 1 ;\
+ $(TOUCH) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || exit 1 ;\
if [ x$$USER != x ]; then \
- $(CHOWN) $$USER:$$GROUP_T $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || \
+ $(CHOWN) $$USER $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || \
+ $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
+ fi ;\
+ if [ x$$GROUP_T != x ]; then \
+ $(CHGRP) $$GROUP_T $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || \
$(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
fi ;\
$(CHMOD) $(RWD_MODE) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || exit 1 ;\
$(INSTALL) $(INSTALL_P) init.tmp /etc/rc.d/init.d/privoxy && $(RM) init.tmp;\
$(MKDIR) /etc/logrotate.d/ ;\
$(ECHO) "Installing logrotate script to /etc/logrotate.d/" ;\
- $(INSTALL) $(INSTALL_P) privoxy.logrotate /etc/logrotate.d/privoxy ;\
+ $(INSTALL) -m 0644 privoxy.logrotate /etc/logrotate.d/privoxy ;\
elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
$(ECHO) "Installing generic init script to /etc/init.d/privoxy" ;\
$(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\
else \
$(ECHO) "No init script installed, install it manually if needed" ;\
fi
- # mmmmm, good.
+ @# mmmmm, good.
@$(ECHO) "$(PROGRAM_V) installation succeeded!"
@$(ECHO) "The Privoxy configuration files have been installed in $(CONF_DEST)"
# rmdir is used as a precaution since it will not remove non-empty
# directories. RH init script creates lock file and pid file.
uninstall: CONF_DEST LOG_DEST PID_DEST check_doc
- $(ECHO) Starting Privoxy uninstallation
- # KILL privoxy if running
- -if [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
+ @$(ECHO) Starting Privoxy uninstallation
+ @# KILL privoxy if running
+ -@if [ -f /etc/redhat-release ] && [ -x /etc/rc.d/init.d/privoxy ]; then \
/etc/rc.d/init.d/privoxy stop >/dev/null 2>/dev/null ;\
chkconfig --del $(PROGRAM) 2>/dev/null;\
fi
- -@ test -f $(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
- $(KILL) `$(CAT) $(PID_DEST)/privoxy.pid`
- -@ test -f /var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
- $(KILL) `$(CAT) /var/run/privoxy.pid `
+ -@test -f $(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
+ $(KILL) `$(CAT) $(PID_DEST)/privoxy.pid` || :
+ -@test -f /var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
+ $(KILL) `$(CAT) /var/run/privoxy.pid ` || :
- # Program binary
- $(ECHO) Removing $(PROGRAM) binary
+ @# Program binary
+ @$(ECHO) Removing $(PROGRAM) binary
$(RM) $(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~
- # config files and dir, and maybe old install backups
- $(ECHO) Removing $(PROGRAM) config files
- for i in $(CONFIGS); do \
+ @# config files and dir, and maybe old install backups
+ -@if [ -d $(CONF_DEST) ]; then \
+ $(ECHO) Saving $(PROGRAM) config files to /tmp/$(PROGRAM)-save ;\
+ $(MKDIR) /tmp/$(PROGRAM)-save ;\
+ cd $(CONF_DEST) ;\
+ for i in $(CONFIGS); do \
+ [ -f $$i ] && $(CP) $$i /tmp/$(PROGRAM)-save ;\
+ done ;\
+ fi
+ @$(ECHO) Removing $(PROGRAM) config files
+ -@for i in $(CONFIGS); do \
+ test -f $(CONF_DEST)/$$i && $(ECHO) Removing $$i ;\
$(RM) $(CONF_DEST)/$$i $(CONF_DEST)/$$i~ $(CONF_DEST)/$$i.new ;\
done
- $(RM) -r $(CONF_DEST)/templates
+ -@test -d $(CONF_DEST)/templates && $(RM) -r $(CONF_DEST)/templates &&\
+ $(ECHO) "Removing $(CONF_DEST)/templates/*"
- # man page and docs
- $(ECHO) Removing $(PROGRAM) docs
+ @# man page and docs
+ @$(ECHO) Removing $(PROGRAM) docs
-$(RM) $(MAN_DEST)/privoxy.1*
-$(RM) -r $(DOC_DEST) || $(RM) -r $(prefix)/doc/privoxy
- # Log and jarfile and pidfile
- $(ECHO) Removing $(PROGRAM) logs
+ @# Log and jarfile and pidfile
+ @$(ECHO) Removing $(PROGRAM) logs
-$(RM) $(LOG_DEST)/logfile $(PID_DEST)/privoxy.pid $(LOG_DEST)/jarfile
- # Final clean up of unused directories. Special handling of CONF and LOG
+ @# Final clean up of unused directories. Special handling of CONF and LOG
# destinations.
- $(ECHO) Removing $(PROGRAM) directories
- for i in $(LOG_DEST) $(CONF_DEST); do \
+ @$(ECHO) Removing $(PROGRAM) directories
+ @for i in $(LOG_DEST) $(CONF_DEST); do \
if test -d $$i; then \
+ $(ECHO) Removing $$i ;\
$(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
fi;\
done
- if [ ! "$(prefix)" = "/usr/local" ] ;then \
+ @if [ ! "$(prefix)" = "/usr/local" ] ;then \
for i in $(MAN_DEST) $(MAN_DIR) $(SHARE_DEST)/doc $(SHARE_DEST) $(SBIN_DEST); do \
if test -d $$i; then \
+ $(ECHO) Removing $$i ;\
$(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
fi;\
done;\
if test $(LOG_DEST) != /var/log/privoxy && test -d $(prefix)/var/log; then \
+ $(ECHO) Removing $(prefix)/var/log ;\
$(RMDIR) $(prefix)/var/log || $(ECHO) "$(prefix)/var/log is not empty, not removed";\
fi ;\
if test $(PID_DEST) != /var/run && test -d $(prefix)/var/run; then \
+ $(ECHO) Removing $(prefix)/var/run ;\
$(RMDIR) $(prefix)/var/run || $(ECHO) "$(prefix)/var/run is not empty, not removed";\
fi ;\
if test $(prefix)/var != /var && test -d $(prefix)/var; then \
+ $(ECHO) Removing $(prefix)/var ;\
$(RMDIR) $(prefix)/var || $(ECHO) "$(prefix)/var is not empty, not removed" ;\
fi ;\
if test $(prefix) != / && test $(prefix) != /usr && test -d $(prefix); then \
+ $(ECHO) Removing $(prefix) ;\
$(ECHO) Removing installation directory $(prefix) ;\
$(RMDIR) $(prefix) || $(ECHO) "$(prefix) is not empty, not removed" ;\
fi;\
fi
- # init scripts and logrotate
- if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
+ @# init scripts and logrotate
+ @if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
$(ECHO) Removing $(PROGRAM) init script ;\
if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
$(RM) /etc/rc.d/rc.privoxy ;\
$(ECHO) "Unable to remove privoxy init script, not installed or permission denied" ;\
fi ;\
fi
- $(ECHO) Privoxy uninstalled, bye
+ @$(ECHO) Privoxy uninstalled, bye
coffee:
@perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,101,0,109,143,205,13,192,32,8,133,\
## end:
# $Log: GNUmakefile.in,v $
+# Revision 1.134 2002/10/28 06:01:39 hal9
+# Make uninstall: cp -v problems on SF Solaris.
+#
+# Revision 1.133 2002/10/28 02:12:22 hal9
+# Make install/uninstall:
+# - More cleanup of variables
+# - Make the minimum requirement for root install, an available non-root GROUP.
+# If a privoxy user exists (and no other USER is specified), then the files
+# that require write access are installed as group owned by privoxy. FIXME:
+# There has to be a cleaner way to do this.
+# - Uninstall now saves configuration files to /tmp.
+#
+# Revision 1.132 2002/10/24 22:24:58 hal9
+# Make install: Minor clean up for variable handling.
+#
# Revision 1.131 2002/10/23 07:00:21 agotneja
# added a chmod on mkinstalldirs just before using it, otherwise it
# will fail when running make for the first time.
projects / privoxy.git / blobdiff