# Note: Makefile is built automatically from Makefile.in
#
-# $Id: GNUmakefile.in,v 1.197 2011/08/17 10:30:11 fabiankeil Exp $
+# $Id: GNUmakefile.in,v 1.213 2013/01/09 15:06:30 fabiankeil Exp $
#
-# Written by and Copyright (C) 2001-2010 members of the
+# Written by and Copyright (C) 2001-2013 members of the
# Privoxy team. http://www.privoxy.org/
#
# Based on the Internet Junkbuster originally written
-# by and Copyright (C) 1997 Anonymous Coders and
+# by and Copyright (C) 1997 Anonymous Coders and
# Junkbusters Corporation. http://www.junkbusters.com
#
-# This program is free software; you can redistribute it
+# This program is free software; you can redistribute it
# and/or modify it under the terms of the GNU General
# Public License as published by the Free Software
# Foundation; either version 2 of the License, or (at
LOGS_DEST = $(VAR_DEST)/log/privoxy
PIDS_DEST = $(VAR_DEST)/run
-# if $prefix = /usr/local then the default CONFDEST change from
-# CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy
+# if $prefix = /usr/local then the default CONFDEST change from
+# CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy
# by the target rule CONF_DEST
#
# also if the $prefix is /usr/local and there is no
# $(SHARE_DEST)/doc, it checks for $prefix/doc and installs there
# instead in this situation
#
-# finally if $prefix=/usr/local and VAR_DEST=$prefix/var it
+# finally if $prefix=/usr/local and VAR_DEST=$prefix/var it
# changes this to /var for storing the logs and pidfile
# used in source dir only, the install goes to $share_dest/doc/privoxy
# Binaries
BIN_MODE = 0755
# Support files, docs, etc.
-RA_MODE = 0664
+RA_MODE = 0644
# Directory
DIR_MODE = 0755
# Files daemon writes to.
RWD_MODE = 0660
-INSTALL_P = -m $(BIN_MODE)
+INSTALL_P = -m $(BIN_MODE)
INSTALL_T = -m $(RA_MODE)
INSTALL_D = -m $(DIR_MODE) -d
INSTALL_R = -m $(RWD_MODE)
# install options for superuser install
-#INSTALL_S = -g @GROUP@ -o @USER@
+#INSTALL_S = -g @GROUP@ -o @USER@
#############################################################################
# Build tools
DOC_DIR = doc/source
DOC_TMP = $(DOC_DIR)/tmp
DOC_STATUS = @DOC_STATUS@
+TIDY = tidy -modify -indent -wrap 78 --tidy-mark no
# Program to do LF->CRLF
#
# If your SF user name differs from your local one,
# change this to "ssh -l sf-username"
SSH = ssh
+WWW_ROOT = /home/project-web/ijbswa
#############################################################################
# Setup for make distribution for now.
# possibly other OSs).
SPECIAL_CFLAGS = @SPECIAL_CFLAGS@
-# Add your flags here
-OTHER_CFLAGS =
+# Add your flags here
+OTHER_CFLAGS =
CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
- @STATIC_PCRE_ONLY@ -Ipcre
+ @STATIC_PCRE_ONLY@ -Ipcre
LDFLAGS = @LDFLAGS@ $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
$(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
trust.txt: trust
- $(DOSFILTER) < $< > $@
+ $(DOSFILTER) < $< > $@
#############################################################################
# Pre-dist check:
#############################################################################
# create tar.gz from CVS:
-# This make-target is usually called through 'create-archive'. If you
+# This make-target is usually called through 'create-archive'. If you
# run 'make create-snapshot' without setting SNAPVERSION, you'll get a
-# tar.gz with the current date in the name and as a releasenumber in the
+# tar.gz with the current date in the name and as a releasenumber in the
# spec-file. But the main usage is to run it as follows (Red Hat example):
# make SNAPVERSION=1.6x create-snapshot
# This creates a tar.gz.
#############################################################################
# looks at the version of Makefile and exports a corresponding source-tree
-# example: if the Makefile has the sticky tag v_2_9_13, you'll get
+# example: if the Makefile has the sticky tag v_2_9_13, you'll get
# privoxy-*-2.4.13.tar.gz.
#############################################################################
create-archive:
# add config files
for foo in $(CONFIG_FILES); do \
(cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
- done;
+ done;
# add documentation
for foo in $(DOC_FILES); do \
(cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \
# and zip the archive
- $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
+ $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
$(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar
@$(ECHO) Tarball distribution created.
#############################################################################
# developer manual
-dok-devel:
+dok-devel:
$(RM) doc/webserver/developer-manual/*.html
$(RM) -r doc/source/developer-manual
mkdir -p doc/source/developer-manual
cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/
# user manual
-dok-user:
+dok-user:
$(RM) doc/webserver/user-manual/*.html
$(RM) -r doc/source/user-manual/
mkdir -p doc/source/user-manual
$(PERL) -pi.bak -e 's/<\/head/\n<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"p_doc.css\">\n<\/head/i' doc/webserver/user-manual/*html
# faq
-dok-faq:
+dok-faq:
$(RM) doc/webserver/faq/*.html
$(RM) -r doc/source/faq
mkdir -p doc/source/faq
cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/
-# man page, one variation. Try to use the next target, just 'make man'.
-dok-man:
+# man page, one variation. Try to use the next target, just 'make man'.
+dok-man:
$(RM) doc/man/* doc/webserver/man-page/*.html
echo MAN2HTML is $(MAN2HTML)
@if [ $(MAN2HTML) != "false" ]; then \
fi;
# Build man page from sgml. This requires the SGMLSpm perl module.
-# See CPAN, or your favorite perl repository. This is the preferred
+# See CPAN, or your favorite perl repository. This is the preferred
# target for man page generation!
man: dok-release
mkdir -p doc/source/temp && cd doc/source/temp && $(RM) * ;\
# for documentation, etc.
#
# index.html for webserver:
-dok-webserver:
+dok-webserver:
cd doc/source/webserver && $(DB)-notoc -ip-homepage -V nochunks index.sgml > ../../webserver/index.html
$(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
- s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
s/\.\d\. //;\
s/__copy/©/'\
doc/webserver/index.html && $(RM) doc/webserver/*.bak
# privoxy-index.html for local documentation:
-dok-index:
+dok-index:
cd doc/source/webserver && $(DB)-notoc -ip-index -V nochunks index.sgml > ../../webserver/privoxy-index.html
$(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
- s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
s/\.\d\. //;\
s/__copy/©/' \
doc/webserver/privoxy-index.html && $(RM) doc/webserver/*.bak
@$(ECHO) Documentation created.
## Make AUTHORS file
-dok-authors:
+dok-authors:
cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && env -u LANG $(WDUMP) \
tmp.html > ../../AUTHORS && $(RM) tmp.html
$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "INCLUDE">/;\
s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "IGNORE">/' \
doc/source/*sgml doc/source/*/*sgml; \
- $(RM) -r doc/source/*bak doc/source/*/*bak; \
else \
$(ECHO) Setting docs to not stable $(VERSION); \
$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "IGNORE">/; \
s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "INCLUDE">/' \
doc/source/*sgml doc/source/*/*sgml; \
- $(RM) -r doc/source/*bak doc/source/*/*bak; \
fi;
+ $(RM) -r doc/source/*bak doc/source/*/*bak;
# Create release announcement in text and html, with short and long versions.
# This is a standalone target, and must be invoked directly.
# mv -f index.html announce.html && $(WDUMP) announce.html > announce.txt
# cd $(DOC_TMP) && $(DB) announce.sgml &&\
# mv -f index.html announce-mini.html && $(WDUMP) announce-mini.html > announce-mini.txt &&\
-# mv -f *html *txt ../../..
+# mv -f *html *txt ../../..
# rm -fr $(DOC_TMP)
-# The main Privoxy config file, generated from sgml sources.
-# NOTE: This will require some hand editing. The new file is outputted
-# as config.new so that problem sections can be compared to previous
-# version. This is hardcored to w3m for html/text conversion. Also,
-# requires the shell util 'fmt'.
+# The main Privoxy config file, generated from sgml sources.
+# NOTE: This will require some hand editing.
config-file: dok-release
cd doc/source && $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
- env -u LANG w3m -dump __tmp.html | fmt -w 70 > ../../config.new && $(RM) -r __tmp.*
- $(PERL) -i.bak utils/prepare-configfile.pl config.new
+ env -u LANG LC_ALL=C w3m -dump -cols 67 __tmp.html > ../../config && $(RM) __tmp.*
+ $(PERL) -i.bak utils/prepare-configfile.pl config
$(RM) *.bak
@$(ECHO) "****************************************************"
- @$(ECHO) "The output file is config.new."
- @$(ECHO) "Now -- you need to hand edit the results!!!"
+ @$(ECHO) "The config file has been optimistically updated"
+ @$(ECHO) "Now -- you may need to hand edit the results!"
@$(ECHO) "In particular, check the Debug levels, the"
@$(ECHO) "permit-access, forward & socks examples and the"
@$(ECHO) "various user-manual examples, which all"
- @$(ECHO) "probably got hammered."
+ @$(ECHO) "might have gotten hammered."
@$(ECHO) "****************************************************"
# config file, alternate version using lynx (perl stuff unfinished). Lynx
# does not do so good a job.
-config-file-alt:
+config-file-alt:
cd doc/source && $(ECHO) -e ".h2 JUSTIFY\\nJUSTIFY:FALSE" > __tmp.lynx_cfg &&\
$(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
lynx -cfg=__tmp.lynx_cfg -width=78 -dump __tmp.html > ../../config.new && $(RM) -r __tmp.*
# moves dokumentation to webserver
#
#############################################################################
-webserver: tidy
+webserver: clean-editor-files
@$(ECHO) -------------------------------------------------------
@$(ECHO) You will need to "create" a SF shell first:
@$(ECHO) ssh -t SF-USER-ID,ijbswa@shell.sourceforge.net create
@$(ECHO) Please make sure your documentation files are up to date.
- @$(ECHO) Note that this command updates the home page and copys
+ @$(ECHO) Note that this command updates the home page and copys
@$(ECHO) all stuff to the webserver, it will not remove obsolete documents.
@$(ECHO) Note that a botched upload can result in the documentation
@$(ECHO) on the website becoming unreachable! Also the CSS files
@$(ECHO) -------------------------------------------------------
@$(ECHO) Replacing the user-manual symlink
- @$(SSH) shell.sourceforge.net "cd /home/groups/i/ij/ijbswa/htdocs && rm user-manual \
+ @$(SSH) shell.sourceforge.net "cd $(WWW_ROOT)/htdocs && rm user-manual \
&& mkdir -p $(VERSION)/user-manual && ln -s $(VERSION)/user-manual user-manual"
@$(ECHO) Uploading html
@cd doc/webserver; \
upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
- $(TAR) cf - $$upload | $(SSH) shell.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
+ $(TAR) cf - $$upload | $(SSH) shell.sourceforge.net 'cd $(WWW_ROOT)/htdocs/; tar xvm 2>&1 | grep -v timestamp'
@$(ECHO) Fixing permissions
- @$(SSH) shell.sourceforge.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true'
- @$(SSH) shell.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
+ @$(SSH) shell.sourceforge.net 'chmod -R 775 $(WWW_ROOT)/htdocs 2>/dev/null; true'
+ @$(SSH) shell.sourceforge.net 'find $(WWW_ROOT)/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
-web-actions: tidy
- @$(ECHO) Uploading
+web-actions: clean-editor-files
+ @$(ECHO) Uploading
@cd doc/webserver/actions; \
upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
- $(TAR) cf - $$upload | $(SSH) ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm'
+ $(TAR) cf - $$upload | $(SSH) ijbswa.sourceforge.net 'cd $(WWW_ROOT)/htdocs/actions; tar xvm'
@$(ECHO) Fixing permissions
- @$(SSH) ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
- @$(SSH) ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
+ @$(SSH) ijbswa.sourceforge.net 'find $(WWW_ROOT)/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
+ @$(SSH) ijbswa.sourceforge.net 'chmod 666 $(WWW_ROOT)/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
-##
+##
dok-put:
tar --exclude ".cvsignore" --exclude "CVS" --exclude "source" --exclude ".htaccess" \
--exclude "obsolete" --exclude "actions" --exclude "*.zip" --exclude "robots.txt"\
doc/* INSTALL LICENSE AUTHORS README \
-czf $(DOC_FILE) ;\
$(ECHO) "Uploading doc package ..." ;\
- scp $(DOC_FILE) ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/docs/
- @$(SSH) ijbswa.sourceforge.net 'chmod 775 /home/groups/i/ij/ijbswa/htdocs/docs/*gz 2>/dev/null; true'
+ scp $(DOC_FILE) ijbswa.sourceforge.net:$(WWW_ROOT)/htdocs/docs/
+ @$(SSH) ijbswa.sourceforge.net 'chmod 775 $(WWW_ROOT)/htdocs/docs/*gz 2>/dev/null; true'
$(RM) $(DOC_FILE)
dok-get:
$(WGET) http://www.privoxy.org/docs/$(DOC_FILE) ;\
$(TAR) -zxvf $(DOC_FILE)
+#############################################################################
+#
+# Try to clean up the generated HTML files.
+#
+# The files are a such a mess that some of them require two tidy runs
+# in row as the first abort prematurely. The vanilla tidy output renders
+# poorly as it contains a bit too much white-space, so we additionally run
+# the files through perl to fix this again.
+#
+#############################################################################
+dok-tidy:
+ for html_file in `find doc/webserver -name "*.html"`; do \
+ $(TIDY) $$html_file || $(TIDY) $$html_file; \
+ $(PERL) -i'' -e 's@^\s*<br>\s*$$@@; s@ +$$@@;' -n -p $$html_file; \
+ done
+
#############################################################################
# Source file dependencies
deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
encode.@OBJEXT@: encode.c encode.h config.h
errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h
-filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h urlmatch.h @WIN_ONLY@win32.h
+filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h urlmatch.h @WIN_ONLY@win32.h
gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h w32svrapi.h cgi.h
gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h
# PCRS
-pcrs.@OBJEXT@: pcrs.c pcrs.h config.h @STATIC_PCRE_ONLY@pcre/pcre.h
+pcrs.@OBJEXT@: pcrs.c pcrs.h config.h @STATIC_PCRE_ONLY@pcre/pcre.h
# PCRE
pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h
pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h
-pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c
+pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c
pcre/pcreposix.@OBJEXT@: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h
pcre/study.@OBJEXT@: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h
$(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) default.action \
`find . -name TAGS -o -name tags | $(GREP) -v .git` config.base config.tmp
-tidy:
+clean-editor-files:
$(RM) `find . -name "*~"`
$(RM) `find . -name "#*#"` # Emacs backup files
$(RM) `find . -name ".\#*"`
-clobber: tidy
+clobber: clean-editor-files
$(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \
privoxy.log core *.tar.gz *.tar privoxy-cl.spec doc/source/ldp.dsl config.new
$(RM) -r autom4te.cache
#
-# FIXME: What is all this?
+# FIXME: What is all this?
#
- $(RM) cscope.* *.pdb *.lib *.exp
+ $(RM) cscope.* *.pdb *.lib *.exp
distclean: clobber
install-strip:
$(MAKE) install STRIP=-s
-# FIXME: Test USER and GROUP on Slack to make sure this works as
+# FIXME: Test USER and GROUP on Slack to make sure this works as
# intended.
#
-# FIXME: id handling needs help, probably via configure, since 'id -u' is not
-# universally reliable (eg Solaris). Group handling could be better.
+# FIXME: id handling needs help, probably via configure, since 'id -u' is not
+# universally reliable (eg Solaris). Group handling could be better.
# Perhaps the whole user/group validation should be done here, and simplified.
PROGRAM_V = Privoxy $(VERSION) $(CODE_STATUS)
install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T
@if [ -n "$(USER)" ]; then \
$(ID) $(USER) >/dev/null || exit 1;\
fi
- @# Test for valid group. FIXME. USER does not have to belong to GROUP
+ @# Test for valid group. FIXME. USER does not have to belong to GROUP
@# for file ownership purposes.
# if [ -n "$(GROUP_T)" ] && [ -n "$(USER)" ] && ! $(GROUPS) $(USER) | $(GREP) "\<$(GROUP_T)\>" >/dev/null; then \
# $(ECHO) Group $(GROUP_T) for User $(USER) is invalid && exit 1 ;\
$(SED) 's+^#\?user-manual .*+user-manual $(prefix)/doc/privoxy/user-manual/+' config.tmp >config.updated ;\
fi;\
$(MV) config config.base
- $(MV) config.updated config
+ $(MV) config.updated config
- @# Install the config support files. Test for root install, and abort
- @# if there is no privoxy user, and no other user was enabled during
+ @# Install the config support files. Test for root install, and abort
+ @# if there is no privoxy user, and no other user was enabled during
@# configure. Later, install init script if appropriate.
@$(ECHO) Installing templates to $(DESTDIR)$(CONF_DEST)/templates
@for i in `find templates -type f`; do \
projects / privoxy.git / blobdiff