# Note: Makefile is built automatically from Makefile.in
#
-# $Id: GNUmakefile.in,v 1.179 2009/02/22 14:48:31 hal9 Exp $
+# $Id: GNUmakefile.in,v 1.181 2009/04/04 20:24:29 fabiankeil Exp $
#
# Written by and Copyright (C) 2001 - 2008 the SourceForge
# Privoxy team. http://www.privoxy.org/
VERSION_POINT = @VERSION_POINT@
CODE_STATUS = @CODE_STATUS@
VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
-RPM_VERSION = $(VERSION)
-RPM_PACKAGEV = ""
-SNAPVERSION = $(RPM_VERSION)-$(shell date "+%Y%m%d")
+SNAPVERSION = $(VERSION)-$(shell date "+%Y%m%d")
#############################################################################
SED = sed
GREP = grep
CAT = cat
-RPM = rpm
-RPMBUILD = rpmbuild
MV = mv
TAR = tar
LN = ln
#TMPDIR := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX)
#############################################################################
-# Setup for make distribution rh and suse for now
+# Setup for make distribution for now.
#############################################################################
-TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz
-RPM_BASE = @RPM_BASE@
+TAR_ARCH = /tmp/privoxy-$(VERSION).tar.gz
#############################################################################
# We include these files in our distributions
#############################################################################
# Phony targets
#############################################################################
-.PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \
-suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
-install conectiva-spec conectiva-dist conectiva-upload CONF_DEST LOG_DEST \
+.PHONY: all inifiles solaris-dist \
+win-dist tarball-dist dok webserver clean clobber tags \
+install CONF_DEST LOG_DEST \
PID_DEST check_doc install-strip uninstall GROUP_T
#############################################################################
# tar.gz with the current date in the name and as a releasenumber in the
# spec-file. But the main usage is to run it as follows (Red Hat example):
# make SNAPVERSION=1.6x create-snapshot
-# This creates a tar.gz and spec-file for a Red Hat 6.x version.
+# This creates a tar.gz.
#############################################################################
create-snapshot:
@tag=`cvs -d $(CVSROOT) status Makefile | awk ' /Sticky Tag/ { print $$3 } '` 2> /dev/null; \
TMPDIR=$(shell mktemp -d /tmp/$(PROGRAM).XXXXXX); \
cd $$TMPDIR ; cvs -Q -d $(CVSROOT) export -r $$tag current || echo "Um... export aborted."; \
cd $$TMPDIR/current; \
- TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
- if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
- -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
- privoxy-rh.spec > $$TMPFILE ; then \
- $(MV) -f $$TMPFILE privoxy-rh.spec; \
- else \
- $(ECHO) "Could not set version info in specfile."; \
- exit 1;\
- fi;\
- if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
- -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
- privoxy-suse.spec > $$TMPFILE ; then \
- $(MV) -f $$TMPFILE privoxy-suse.spec; \
- else \
- $(ECHO) "Could not set version info in specfile."; \
- exit 1;\
- fi; \
- $(RM) $$TMPFILE; \
- cd $$TMPDIR/current; \
$(TAR) --exclude ".cvsignore" --exclude "CVS" \
-czf /tmp/$(PROGRAM)-$(VERSION).tar.gz .; \
$(RM) -rf $$TMPDIR
#############################################################################
# looks at the version of Makefile and exports a corresponding source-tree
# example: if the Makefile has the sticky tag v_2_9_13, you'll get
-# privoxy-*-2.4.13.tar.gz. Two different tar files will be written, one for
-# Red Hat and one for SuSe (different spec-files)
+# privoxy-*-2.4.13.tar.gz.
#############################################################################
create-archive:
make SNAPVERSION=$(SNAPVERSION) create-snapshot
-#############################################################################
-# RPM specifice stuff (SuSE or Redhat, ..)
-#############################################################################
-rpm-stuff: dist-check clean clobber
- for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
- if [ ! -w $(RPM_BASE)/$$dir ]; then \
- $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
- $(ECHO) "Or add a suitable path to .rpmmacros like."; \
- $(ECHO) "%_topdir /home/foo/rpm-build"; \
- exit 1; \
- fi; \
- done; \
-
-check-release:
- @if [ "$(RPM_PACKAGEV)" = "" ]; then \
- echo ; \
- echo " ERROR: NO RPM_PACKAGEV VALUE"; \
- echo " No value given for RPM_PACKAGEV. Please use:"; \
- echo " make dist-upload RPM_PACKAGEV=release"; \
- echo " where \"release\" is the release number you want to and"; \
- echo " where \"dist\" is the name of the distro (redhat or suse)"; \
- echo ; \
- echo " Ex: make redhat-upload RPM_PACKAGEV=1"; \
- echo ""; \
- echo "ATTENTION: If your distribution use a specific tag on the"; \
- echo " release field (like \"cl\" for Conectiva, and"; \
- echo " \"mdk\" for Mandrake), DO NOT put it on the value"; \
- echo " given to RPM_PACKAGEV. It will be added automaticaly."; \
- echo " Do it like you would do for a redhat package,"; \
- echo " (i.e. just the number)."; \
- echo ; \
- exit 1; \
- fi
-
-
-#############################################################################
-# Create Conectiva specfile from RedHat specfile
-#############################################################################
-conectiva-spec:
- $(RM) privoxy-cl.spec
- chmod a+x genclspec.sh
- ./genclspec.sh
-
-#############################################################################
-# Conectiva distribution for x86
-#############################################################################
-conectiva-dist: rpm-stuff conectiva-spec
-
- $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-rh.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
- $(RPMBUILD) --clean -ta $(TAR_ARCH)
- if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
-
-conectiva-upload: check-release
- make redhat-upload RPM_PACKAGEV=$(RPM_PACKAGEV)cl
-
-#############################################################################
-# redhat distribution alpha and x86
-#############################################################################
-redhat-dist: rpm-stuff
- echo $(CONFIG_FILES)
- $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
- $(RPMBUILD) --clean -ta $(TAR_ARCH)
- if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
-
-# For testing build issues only! Use redhat-dist for official releases.
-redhat-test:
- echo $(CONFIG_FILES)
- $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
- $(RPMBUILD) --clean -tb $(TAR_ARCH)
- if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
- @echo "WARNING: This target is only for testing. Use redhat-dist for releases!!!"
-
-# anonymously ncftps the rpms to sourceforge
-redhat-upload: check-release
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
-# better should use `arch` here instead of ix86 to support other platforms too
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
- @$(ECHO) -------------------------------------------------------
- @$(ECHO) Now goto
- @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
- @$(ECHO) ... and release the files.
- @$(ECHO) -------------------------------------------------------
- # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
-
-
-#############################################################################
-# Creates a Red Hat sourcepackage from CVS (not from the current sources
-# on disk)
-#############################################################################
-redhat-srpm:
- make create-archive
- $(RPMBUILD) -ts --nodeps $(PROGRAM)-$(VERSION).tar.gz
-
-
-#############################################################################
-# suse distribution. works fine. no need to be root.
-#############################################################################
-suse-dist: rpm-stuff
-# TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
-# if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
-# -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
-# privoxy-suse.spec > $$TMPFILE ; then \
-# $(MV) -f $$TMPFILE privoxy-suse.spec; \
-# else \
-# $(ECHO) "Could not set version info in specfile."; \
-# exit 1;\
-# fi
-
- $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
- $(RPMBUILD) --clean -ta $(TAR_ARCH)
- if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
-
-# anonymously ncftps the rpms to sourceforge
-suse-upload: check-release
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
-# better should use `arch` here instead of ix86 to support other platforms too
- ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
- @$(ECHO) -------------------------------------------------------
- @$(ECHO) Now goto
- @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
- @$(ECHO) ... and release the files.
- @$(ECHO) -------------------------------------------------------
-
-# handle with care. use with root.
-suse-clean:
- $(RPM) -e junkbuster-suse || true
- $(RM) -r /etc/junkbuster
- $(RM) -r /etc/rc.d/junkbuster*
- $(RM) -r /var/run/junkbuster.pid
- $(RM) -r /var/log/junkbuster
- $(RM) /etc/init.d/junkbuster
- $(RM) /usr/sbin/junkbuster
- $(RM) /usr/sbin/rcjunkbuster
- $(RM) /usr/share/man/man1/junkbuster.1.gz
- $(RPM) -e privoxy-suse || true
- $(RM) -r /etc/privoxy
- $(RM) -r /etc/rc.d/privoxy*
- $(RM) -r /var/run/privoxy.pid
- $(RM) -r /var/log/privoxy
- $(RM) /etc/init.d/privoxy
- $(RM) /usr/sbin/privoxy
- $(RM) /usr/sbin/rcprivoxy
- $(RM) /usr/share/man/man1/privoxy.1.gz
-
#############################################################################
# generic distribution
#############################################################################
dok: dok-release dok-devel dok-user dok-faq dok-readme dok-webserver dok-authors dok-index
@$(ECHO) Documentation created.
-#
-# an alternative to the above dok. disabled man page creation for the moment
-#
-redhat-dok: dok-release dok-devel dok-user dok-faq redhat-readme dok-webserver dok-authors
- @$(ECHO) Documentation created.
-
-## Make README
-redhat-readme:
- cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html && $(WDUMP) \
- tmp.html > ../../README && $(RM) -r tmp.html
-
## Make AUTHORS file
dok-authors:
cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && env -u LANG $(WDUMP) \
$(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
clean:
- $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) default.action `find . -name TAGS -o -name tags` config.base config.tmp
+ $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) default.action \
+ `find . -name TAGS -o -name tags | $(GREP) -v .git` config.base config.tmp
tidy:
$(RM) `find . -name "*~"`
$(INSTALL) $(INSTALL_P) slackware/rc.privoxy $(DESTDIR)/etc/rc.d/ ;\
$(ECHO) "Installing for Slackware." ;\
$(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\
- elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
- $(ECHO) "Installing init script to /etc/rc.d/init.d/privoxy" ;\
- $(SED) 's,^PRIVOXY_BIN=.*,PRIVOXY_BIN="/usr/local/sbin/$(PROGRAM)",' privoxy.init |\
- $(SED) 's,^PRIVOXY_CONF=.*,PRIVOXY_CONF="$(CONF_DEST)/config",' |\
- $(SED) "s,^PRIVOXY_USER=.*,PRIVOXY_USER=$$USER," > init.tmp ;\
- $(INSTALL) $(INSTALL_P) init.tmp $(DESTDIR)/etc/rc.d/init.d/privoxy && $(RM) init.tmp;\
- $(MKDIR) $(DESTDIR)/etc/logrotate.d/ ;\
- $(ECHO) "Installing logrotate script to $(DESTDIR)/etc/logrotate.d/" ;\
- $(INSTALL) -m 0644 privoxy.logrotate $(DESTDIR)/etc/logrotate.d/privoxy ;\
elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
$(ECHO) "Installing generic init script to $(DESTDIR)/etc/init.d/privoxy" ;\
$(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\
@$(ECHO) Starting Privoxy uninstallation
@# KILL privoxy if running
@# XXX: the chkconfig line may need a DESTDIR prefix.
- -@if [ -f $(DESTDIR)/etc/redhat-release ] && [ -x $(DESTDIR)/etc/rc.d/init.d/privoxy ]; then \
- $(DESTDIR)/etc/rc.d/init.d/privoxy stop >/dev/null 2>/dev/null ;\
- chkconfig --del $(PROGRAM) 2>/dev/null;\
- fi
-@test -f $(DESTDIR)$(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
$(KILL) `$(CAT) $(DESTDIR)$(PID_DEST)/privoxy.pid` || :
-@test -f $(DESTDIR)/var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
fi;\
fi
- @# init scripts and logrotate
+ @# init scripts
@if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
$(ECHO) Removing $(PROGRAM) init script ;\
if [ -f $(DESTDIR)/etc/slackware-version ] && \
[ -d $(DESTDIR)/etc/rc.d/ ] && [ -w $(DESTDIR)/etc/rc.d/ ] ; then \
$(RM) $(DESTDIR)/etc/rc.d/rc.privoxy ;\
- elif [ -f $(DESTDIR)/etc/redhat-release ] && [ -d $(DESTDIR)/etc/rc.d/init.d/ ] \
- && [ -w $(DESTDIR)/etc/rc.d/init.d/ ] ; then \
- $(RM) $(DESTDIR)/etc/rc.d/init.d/privoxy $(DESTDIR)/etc/logrotate.d/privoxy;\
elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
$(RM) $(DESTDIR)/etc/init.d/privoxy ;\
else \
## end:
# $Log: GNUmakefile.in,v $
+# Revision 1.181 2009/04/04 20:24:29 fabiankeil
+# Let the clean target play nice with git.
+#
+# Revision 1.180 2009/02/28 08:28:14 fabiankeil
+# pcrs.o doesn't depend on pcre/pcre.h if we are linking
+# dynamically. Patch provided by drauh in #2056286.
+#
# Revision 1.179 2009/02/22 14:48:31 hal9
# Updates to the 'make webserver' target that recreates the home page and uploads
# fresh documents to reflect new SF realities, and more explanation of process.
projects / privoxy.git / blobdiff