# Note: Makefile is built automatically from Makefile.in
#
-# $Id: GNUmakefile.in,v 1.148 2006/09/26 10:57:58 hal9 Exp $
+# $Id: GNUmakefile.in,v 1.177 2009/01/13 16:44:32 fabiankeil Exp $
#
-# Written by and Copyright (C) 2001 - 2004 the SourceForge
+# Written by and Copyright (C) 2001 - 2008 the SourceForge
# Privoxy team. http://www.privoxy.org/
#
# Based on the Internet Junkbuster originally written
USER = @USER@
GROUP = @GROUP@
+datarootdir = @datarootdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
CONF_BASE = @sysconfdir@
RMDIR = rmdir
MKDIR = ./mkinstalldirs
STRIP_PROG = strip
-SED = sed
+SED = sed
GREP = grep
CAT = cat
RPM = rpm
RPMBUILD = rpmbuild
-MV = mv
+MV = mv
TAR = tar
LN = ln
TOUCH = touch
G2H_CMD = groff -mandoc -Thtml
TARGET_OS = @host@
PERL = perl
-DOC_DIR = doc/source
+DOC_DIR = doc/source
DOC_TMP = $(DOC_DIR)/tmp
DOC_STATUS = @DOC_STATUS@
#############################################################################
# We include these files in our distributions
#############################################################################
-CONFIGS = config trust default.action standard.action user.action default.filter user.filter
+CONFIGS = config trust default.action match-all.action user.action default.filter user.filter
# take care that no CVS .cvsignore or other crappy files
# are included here
# and escape every '#' in the find. doh.
`find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \
- `find doc/text/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` \
`find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \
`find doc/webserver/ -name "*.css"` \
- privoxy.1 \
- doc/pdf/*.pdf
+ privoxy.1
#############################################################################
# Filenames and libraries
#############################################################################
C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \
- errlog.c filters.c gateway.c jbsockets.c jcc.c killpopup.c \
+ errlog.c filters.c gateway.c jbsockets.c jcc.c \
list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \
urlmatch.c
CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
@STATIC_PCRE_ONLY@ -Ipcre
-LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
+LDFLAGS = @LDFLAGS@ $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
#############################################################################
config.txt: config
$(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
- -e 's!\jarfile jarfile!jarfile jar.log!' \
-e 's!\logfile logfile!logfile privoxy.log!' \
-e 's!#Win32-only: !!' \
< $< | \
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
@$(ECHO) -------------------------------------------------------
@$(ECHO) Now goto
- @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
@$(ECHO) ... and release the files.
@$(ECHO) -------------------------------------------------------
# w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
# fi
$(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
- $(RPM) --clean -ta $(TAR_ARCH)
+ $(RPMBUILD) --clean -ta $(TAR_ARCH)
if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
# anonymously ncftps the rpms to sourceforge
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
@$(ECHO) -------------------------------------------------------
@$(ECHO) Now goto
- @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
@$(ECHO) ... and release the files.
@$(ECHO) -------------------------------------------------------
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz
@$(ECHO) -------------------------------------------------------
@$(ECHO) Now goto
- @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
@$(ECHO) ... and release the files.
@$(ECHO) -------------------------------------------------------
for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \
-o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o \
- -name "PACKAGERS" -o -path "*/pdf/*" \)`; do \
+ -name "PACKAGERS" \)`; do \
files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \
done && \
cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \
ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
@$(ECHO) -------------------------------------------------------
@$(ECHO) Now goto
- @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
+ @$(ECHO) https://sourceforge.net/project/admin/editpackages.php?group_id=11118
@$(ECHO) ... and release the files.
@$(ECHO) -------------------------------------------------------
#
# Documentation
#
-# converts doc/source/*.sgml into html, text and man pages
+# converts doc/source/*.sgml into html and man pages
#
#############################################################################
dok-devel:
$(RM) doc/webserver/developer-manual/*.html
$(RM) -r doc/source/developer-manual
- mkdir -p doc/text doc/source/developer-manual
+ mkdir -p doc/source/developer-manual
cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/
- cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/developer-manual.txt && $(RM) -r tmp.html developer-manual
# user manual
dok-user:
$(RM) doc/webserver/user-manual/*.html
$(RM) -r doc/source/user-manual/
- mkdir -p doc/text doc/source/user-manual
+ mkdir -p doc/source/user-manual
cd doc/source/user-manual && $(DB) -iuser-man ../user-manual.sgml && cd .. && cp user-manual/*.html ../webserver/user-manual/
- @#FIXME: temp fix so same stylesheet gets in more than one place so it works \
- @# for all doc set-ups, including the 'user manual' config option in local \
- @#system where it MUST be in same directory as html.
+ # FIXME: temp fix so same stylesheet gets in more than one place so it works
+ # for all doc set-ups, including the 'user manual' config option in local
+ # system where it MUST be in same directory as html.
$(PERL) -pi.bak -e 's/<\/head/\n<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"p_doc.css\">\n<\/head/i' doc/webserver/user-manual/*html
- cd doc/source && $(DB) -iuser-man -V nochunks user-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/user-manual.txt && $(RM) -r tmp.html user-manual
# faq
dok-faq:
$(RM) doc/webserver/faq/*.html
$(RM) -r doc/source/faq
- mkdir -p doc/text doc/source/faq
+ mkdir -p doc/source/faq
cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/
- cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) tmp.html > ../text/faq.txt && $(RM) -r tmp.html faq
# man page, one variation. Try to use the next target, just 'make man'.
dok-man:
mkdir -p doc/source/temp && cd doc/source/temp && $(RM) * ;\
nsgmls ../privoxy-man-page.sgml | sgmlspl ../../../utils/docbook2man/docbook2man-spec.pl &&\
perl -pi.bak -e 's/ <URL:.*>//; s/\[ /\[/g' privoxy.1 ;\
+ perl -pi.bak -e "s/\[ /\[/g;s/á/\\\\['a]/g;s/é/\\\\['e]/g" privoxy.1; \
+ perl -pi.bak -e "s/ö/\\\\[:o]/g" privoxy.1; \
+ perl -pi.bak -e 's/([ {])-([a-z])/$$1\\-$$2/g' privoxy.1; \
+ perl -pi.bak -e 's/ --([a-z])/ \\-\\-$$1/g' privoxy.1; \
+ perl -pi.bak -e 's/\\fB--/\\fB\\-\\-/g' privoxy.1; \
$(DB) ../privoxy-man-page.sgml && $(MV) -f privoxy.1 ../../../privoxy.1
# For those with man2html ala RH7s.
# Twice because my version of man2html is pulling in commas and periods in URLs.
$(PERL) -pi.bak -e 's/(<A.*),(">)/$$1$$2/g' tmp.html
$(PERL) -pi.bak -e 's,\.">,">,g' tmp.html
+ $(PERL) -pi.bak -e "s/\['a\]/\á/g;s/\['e\]/\é/g" tmp.html
# Get rid of spurious \a from conversion. (How to do this with perl?)
$(SED) -e 's/\a//g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.*
else
# readme page and INSTALL file
dok-readme: dok-release
cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html &&\
- $(WDUMP) tmp.html > ../../README ;\
+ env -u LANG $(WDUMP) tmp.html > ../../README ;\
$(DB)-notoc -V nochunks install.sgml > tmp.html &&\
- $(WDUMP) tmp.html > ../../INSTALL ;\
+ env -u LANG $(WDUMP) tmp.html > ../../INSTALL ;\
$(RM) tmp.*
# index.sgml is used to create both the Home Page, and a local index
dok-webserver:
cd doc/source/webserver && $(DB)-notoc -ip-homepage -V nochunks index.sgml > ../../webserver/index.html
$(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
- s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps consumers reduce unwanted junk email and protect their privacy from direct marketing companies.\"><\/HEAD/;\
+ s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
s/\.\d\. //;\
s/__copy/©/'\
dok-index:
cd doc/source/webserver && $(DB)-notoc -ip-index -V nochunks index.sgml > ../../webserver/privoxy-index.html
$(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
- s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps consumers reduce unwanted junk email and protect their privacy from direct marketing companies.\"><\/HEAD/;\
+ s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps users to protect their privacy.\"><\/HEAD/;\
s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
s/\.\d\. //;\
s/__copy/©/' \
## Make AUTHORS file
dok-authors:
- cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && $(WDUMP) \
+ cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && env -u LANG $(WDUMP) \
tmp.html > ../../AUTHORS && $(RM) tmp.html
# Set doc entities for VERSION and CODE_STATUS in sgml docs. Toggle content
$(RM) -r doc/source/*bak doc/source/*/*bak
endif
-# Generate single page html. Used only for creating pdf docs (ATM).
-# Currently using: See http://www.easysw.com/htmldoc/pdf-o-matic.php.
-# If using this generator, remember U-M has a couple of graphics in
-# a parallel directory.
-#
-dok-shtml: dok-release
- mkdir -p doc/source/temp # this directory not in cvs
- cd doc/source && $(DB) -iuser-man -V nochunks user-manual.sgml > temp/privoxy-user-manual.html
- cd doc/source && $(DB) -V nochunks developer-manual.sgml > temp/privoxy-developer-manual.html
- cd doc/source && $(DB) -V nochunks faq.sgml > temp/privoxy-faq.html
-# one could use html2ps and ps2pdf. well, that does not work. htmlps produces incorrect output.
-
-# Make pdf docs from single page html. Requires htmldoc, see
-# (http://www.easysw.com/htmldoc/). Note: 1.8.20 has a TOC bug.
-# PDF docs are uploaded to webserver as zip archive.
-dok-pdf: dok-shtml
- @$(ECHO) -n "starting htmldoc version: ";
- if htmldoc --version ; then : ; \
- else $(ECHO) "WARNING: could not get htmldoc version" ; fi
- cd utils/ldp_print && $(RM) *html *bak *jpg *tmp *pdf *zip
- cp -f doc/source/temp/*html doc/webserver/user-manual/*jpg utils/ldp_print
- cd utils/ldp_print ;\
- $(PERL) -pi.bak -e 's/\.\.\/images\///; s/(<\/?)SUB/$$1small/i;\
- s/\.\.\/user-manual\/index\.html/privoxy-user-manual.pdf/;\
- s/\.\.\/developer-manual\/index\.html/privoxy-developer-manual.pdf/;\
- s/\.\.\/faq\/index\.html/privoxy-faq.pdf/' *.html ;\
- for i in developer-manual user-manual faq; do \
- ./ldp_print privoxy-$$i.html ;\
- $(ECHO) DONE: privoxy-$$i.pdf ;\
- done ;\
- $(MV) *.pdf ../../doc/pdf ;\
- $(RM) -r *html *bak *jpg *pdf *zip ../../doc/source/temp
-
# Create release announcement in text and html, with short and long versions.
# This is a standalone target, and must be invoked directly.
# announce: dok-release
# requires the shell util 'fmt'.
config-file: dok-release
cd doc/source && $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
- w3m -dump __tmp.html |fmt -w 70 > ../../config.new && $(RM) -r __tmp.*
- $(PERL) -pi.bak -e 's/^1\. \@\@TITLE\@\@/ /i;\
- /^\d\.\d\.\s+/ && tr/[a-z]/[A-Z]/;\
- $$header_len=0 unless $$hit_header;\
- if ($$hit_header) {\
- print "# ";\
- for ($$i=1; $$i < $$header_len; $$i++) {print "=";}\
- print "\n";\
- };\
- $$hit_header=0;\
- $$hit_header=1 if m/^(\d\.)(\d\.)(\d\.)?\s/ && s/^(\d\.)//;\
- $$header_len = length($$_);\
- s/^/# /; /^# #{12,}/ && s/^# #/####/;\
- s/^.*$$// if $$hit_option;\
- $$hit_option=0;\
- s/^\n//; s/^#\s*-{20,}//; s/ *$$//;\
- $$hit_option=1 if s/^#\s+@@//;' config.new
+ env -u LANG w3m -dump __tmp.html | fmt -w 70 > ../../config.new && $(RM) -r __tmp.*
+ $(PERL) -i.bak utils/prepare-configfile.pl config.new
+
$(RM) *.bak
@$(ECHO) "****************************************************"
@$(ECHO) "The output file is config.new."
@$(ECHO) "probably got hammered."
@$(ECHO) "****************************************************"
-# config file, alternate verison using lynx (perl stuff unfinished). Lynx
+# config file, alternate version using lynx (perl stuff unfinished). Lynx
# does not do so good a job.
config-file-alt:
cd doc/source && $(ECHO) -e ".h2 JUSTIFY\\nJUSTIFY:FALSE" > __tmp.lynx_cfg &&\
upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
$(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
- @$(ECHO) Uploading pdf
- @cd doc/pdf;\
- zip privoxy-pdf-docs *.pdf ;\
- scp -q privoxy-pdf-docs.zip ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/pdf
-
@$(ECHO) Fixing permissions
@ssh ijbswa.sourceforge.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true'
@ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
dok-get:
cd /tmp ;\
- $(WGET) http://privoxy.org/docs/$(DOC_FILE) ;\
+ $(WGET) http://www.privoxy.org/docs/$(DOC_FILE) ;\
$(TAR) -zxvf $(DOC_FILE)
#############################################################################
actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h ssplit.h
-cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
-cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
-cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
+cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h jbsockets.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
+cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actionlist.h actions.h errlog.h miscutil.h
+cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h urlmatch.h
deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
encode.@OBJEXT@: encode.c encode.h config.h
errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h
-filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h @WIN_ONLY@win32.h
+filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h urlmatch.h @WIN_ONLY@win32.h
gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
-jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h killpopup.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h w32svrapi.h cgi.h
-killpopup.@OBJEXT@: killpopup.c killpopup.h config.h $(PROJECT_H_DEPS) jcc.h loadcfg.h
+jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h w32svrapi.h cgi.h
list.@OBJEXT@: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h
-loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h killpopup.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
+loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
loaders.@OBJEXT@: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h
miscutil.@OBJEXT@: miscutil.c miscutil.h config.h
-parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
+parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
ssplit.@OBJEXT@: ssplit.c ssplit.h config.h miscutil.h
urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h
# AmigaOS
@AMIGAOS_ONLY@OBJS += amiga.o
+@AMIGAOS_ONLY@ifeq ($(shell $(CC) -dumpmachine), m68k-amigaos)
@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
@AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
@AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
+@AMIGAOS_ONLY@else
+@AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -Wextra -D__USE_INLINE__ -D__NO_INTUITION_RJ_MACROS
+@AMIGAOS_ONLY@endif
@AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h
tidy:
$(RM) `find . -name "*~"`
-# $(RM) `find . -name "#*#"` # what is this for??
+ $(RM) `find . -name "#*#"` # Emacs backup files
$(RM) `find . -name ".\#*"`
clobber: tidy
@$(ECHO) "Creating directories, and preparing $(PROGRAM_V) installation"
$(CHMOD) $(DIR_MODE) $(MKDIR)
- @$(MKDIR) $(SBIN_DEST) $(prefix) $(CONF_DEST) $(CONF_DEST)/templates $(SHARE_DEST) \
- $(LOG_DEST) $(PID_DEST)
+ @$(MKDIR) $(DESTDIR)$(SBIN_DEST) $(DESTDIR)$(prefix) $(DESTDIR)$(CONF_DEST) \
+ $(DESTDIR)$(CONF_DEST)/templates $(DESTDIR)$(SHARE_DEST) \
+ $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(PID_DEST)
@# Install the executable binary, strip if invoked as install-strip
@test -n "$(STRIP)" &&\
$(ECHO) Installing $(PROGRAM) stripped executable to $(SBIN_DEST) ||\
- $(ECHO) Installing $(PROGRAM) executable to $(SBIN_DEST)
- $(INSTALL) $(INSTALL_P) $(STRIP) $(PROGRAM) $(SBIN_DEST)
-
+ $(ECHO) Installing $(PROGRAM) executable to $(DESTDIR)$(SBIN_DEST)
+ $(INSTALL) $(INSTALL_P) $(STRIP) $(PROGRAM) $(DESTDIR)$(SBIN_DEST)
+
@# Install the DOCS and man page. install-sh only does one file at a time.
@# FIXME: only handles jpegs.
-@if [ $(check_doc) = 0 ]; then \
else \
DOC=$(prefix)/doc/privoxy ;\
fi;\
- $(MKDIR) $$DOC $$DOC/user-manual $$DOC/faq $$DOC/developer-manual \
- $$DOC/man-page $$DOC/images $(MAN_DEST) ;\
+ $(MKDIR) $(DESTDIR)$$DOC $(DESTDIR)$$DOC/user-manual $(DESTDIR)$$DOC/faq $(DESTDIR)$$DOC/developer-manual \
+ $(DESTDIR)$$DOC/man-page $(DESTDIR)$$DOC/images $(DESTDIR)$(MAN_DEST) ;\
if [ -d "$(DOK_WEB)" ]; then \
- $(ECHO) Installing FAQ, Manual, and other docs to $$DOC;\
+ $(ECHO) Installing FAQ, Manual, and other docs to $(DESTDIR)$$DOC;\
for i in user-manual developer-manual faq; do \
for ii in $(DOK_WEB)/$$i/*html; do \
- $(INSTALL) $(INSTALL_T) $$ii $$DOC/$$i;\
+ $(INSTALL) $(INSTALL_T) $$ii $(DESTDIR)$$DOC/$$i;\
done ;\
done ;\
for i in $(DOK_WEB)/user-manual/*jpg; do \
- $(INSTALL) $(INSTALL_T) $$i $$DOC/user-manual;\
+ $(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$$DOC/user-manual;\
done ;\
- $(INSTALL) $(INSTALL_T) $(DOK_WEB)/man-page/*html $$DOC/man-page;\
- $(INSTALL) $(INSTALL_T) $(DOK_WEB)/privoxy-index.html $$DOC/index.html;\
- $(INSTALL) $(INSTALL_T) AUTHORS $$DOC;\
- $(INSTALL) $(INSTALL_T) LICENSE $$DOC;\
- $(INSTALL) $(INSTALL_T) README $$DOC;\
- $(INSTALL) $(INSTALL_T) ChangeLog $$DOC;\
- $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $$DOC;\
- $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $$DOC/user-manual;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/man-page/*html $(DESTDIR)$$DOC/man-page;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/privoxy-index.html $(DESTDIR)$$DOC/index.html;\
+ $(INSTALL) $(INSTALL_T) AUTHORS $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) LICENSE $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) README $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) ChangeLog $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC;\
+ $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $(DESTDIR)$$DOC/user-manual;\
fi
@# Not all platforms support gzipped man pages.
- @$(ECHO) Installing man page to $(MAN_DEST)/privoxy.1
- -$(INSTALL) $(INSTALL_T) privoxy.1 $(MAN_DEST)/privoxy.1
+ @$(ECHO) Installing man page to $(DESTDIR)$(MAN_DEST)/privoxy.1
+ -$(INSTALL) $(INSTALL_T) privoxy.1 $(DESTDIR)$(MAN_DEST)/privoxy.1
@# Change the config file default directories according to the configured ones
@$(ECHO) Rewriting config for this installation
$(CAT) config >config~ ;\
$(MV) config.base config ;\
fi
- $(SED) 's+confdir .+confdir $(CONF_DEST)+' config | \
- $(SED) 's+logdir .+logdir $(LOG_DEST)+' >config.tmp
+ $(SED) 's+^confdir \.+confdir $(CONF_DEST)+' config | \
+ $(SED) 's+^logdir \.+logdir $(LOG_DEST)+' >config.tmp
-@if [ $(check_doc) = 0 ]; then \
$(SED) 's+^#\?user-manual .*+user-manual $(DOC_DEST)/user-manual/+' config.tmp >config.updated ;\
else \
@# Install the config support files. Test for root install, and abort
@# if there is no privoxy user, and no other user was enabled during
@# configure. Later, install init script if appropriate.
- @$(ECHO) Installing templates to $(CONF_DEST)/templates
+ @$(ECHO) Installing templates to $(DESTDIR)$(CONF_DEST)/templates
@for i in `find templates -type f`; do \
- $(INSTALL) $(INSTALL_T) $$i $(CONF_DEST)/templates ;\
+ $(INSTALL) $(INSTALL_T) $$i $(DESTDIR)$(CONF_DEST)/templates ;\
done
@# FIXME: group/user validation is overly convoluted.
fi ;\
INSTALL_CONF="$(INSTALL_R)" ;\
fi ;\
- $(ECHO) Installing configuration files to $(CONF_DEST);\
+ $(ECHO) Installing configuration files to $(DESTDIR)$(CONF_DEST);\
for i in $(CONFIGS); do \
- if [ "$$i" = "default.action" ] || [ "$$i" = "default.filter" ] || [ "$$i" = "standard.action" ]; then \
- $(RM) $(CONF_DEST)/$$i ;\
+ if [ "$$i" = "default.action" ] || [ "$$i" = "default.filter" ] ; then \
+ $(RM) $(DESTDIR)$(CONF_DEST)/$$i ;\
$(ECHO) Installing fresh $$i;\
- $(INSTALL) $$INSTALL_CONF $$i $(CONF_DEST) || exit 1;\
+ $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\
elif [ -s "$(CONF_DEST)/$$i" ]; then \
$(ECHO) Installing $$i as $$i.new ;\
- $(INSTALL) $$INSTALL_CONF $$i $(CONF_DEST)/$$i.new || exit 1;\
+ $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST)/$$i.new || exit 1;\
NEW=1;\
else \
- $(INSTALL) $$INSTALL_CONF $$i $(CONF_DEST) || exit 1;\
+ $(INSTALL) $$INSTALL_CONF $$i $(DESTDIR)$(CONF_DEST) || exit 1;\
fi ;\
done ;\
if [ -n "$$NEW" ]; then \
- $(CHMOD) $(RWD_MODE) $(CONF_DEST)/*.new || exit 1 ;\
+ $(CHMOD) $(RWD_MODE) $(DESTDIR)$(CONF_DEST)/*.new || exit 1 ;\
$(ECHO) "Warning: Older config files are preserved. Check new versions for changes!" ;\
fi ;\
- [ ! -f $(LOG_DEST)/logfile ] && $(ECHO) Creating logfiles in $(LOG_DEST) || \
- $(ECHO) Checking logfiles in $(LOG_DEST) ;\
- $(TOUCH) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || exit 1 ;\
+ [ ! -f $(DESTDIR)$(LOG_DEST)/logfile ] && $(ECHO) Creating logfiles in $(DESTDIR)$(LOG_DEST) || \
+ $(ECHO) Checking logfiles in $(DESTDIR)$(LOG_DEST) ;\
+ $(TOUCH) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\
if [ x$$USER != x ]; then \
- $(CHOWN) $$USER $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || \
+ $(CHOWN) $$USER $(DESTDIR)$(LOG_DEST)/logfile || \
$(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
fi ;\
if [ x$$GROUP_T != x ]; then \
- $(CHGRP) $$GROUP_T $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || \
+ $(CHGRP) $$GROUP_T $(DESTDIR)$(LOG_DEST)/logfile || \
$(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
fi ;\
- $(CHMOD) $(RWD_MODE) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || exit 1 ;\
+ $(CHMOD) $(RWD_MODE) $(DESTDIR)$(LOG_DEST)/logfile || exit 1 ;\
if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
$(SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \
$(SED) 's+%SBIN_DEST%+$(SBIN_DEST)+' | \
$(SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \
- $(SED) 's+%USER%+$$USER+' | \
+ $(SED) 's+%USER%+$(USER)+' | \
$(SED) 's+%GROUP%+$(GROUP_T)+' >slackware/rc.privoxy ;\
- $(INSTALL) $(INSTALL_P) slackware/rc.privoxy /etc/rc.d/ ;\
+ $(INSTALL) $(INSTALL_P) slackware/rc.privoxy $(DESTDIR)/etc/rc.d/ ;\
$(ECHO) "Installing for Slackware." ;\
$(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\
elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
$(SED) 's,^PRIVOXY_BIN=.*,PRIVOXY_BIN="/usr/local/sbin/$(PROGRAM)",' privoxy.init |\
$(SED) 's,^PRIVOXY_CONF=.*,PRIVOXY_CONF="$(CONF_DEST)/config",' |\
$(SED) "s,^PRIVOXY_USER=.*,PRIVOXY_USER=$$USER," > init.tmp ;\
- $(INSTALL) $(INSTALL_P) init.tmp /etc/rc.d/init.d/privoxy && $(RM) init.tmp;\
- $(MKDIR) /etc/logrotate.d/ ;\
- $(ECHO) "Installing logrotate script to /etc/logrotate.d/" ;\
- $(INSTALL) -m 0644 privoxy.logrotate /etc/logrotate.d/privoxy ;\
- elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
- $(ECHO) "Installing generic init script to /etc/init.d/privoxy" ;\
+ $(INSTALL) $(INSTALL_P) init.tmp $(DESTDIR)/etc/rc.d/init.d/privoxy && $(RM) init.tmp;\
+ $(MKDIR) $(DESTDIR)/etc/logrotate.d/ ;\
+ $(ECHO) "Installing logrotate script to $(DESTDIR)/etc/logrotate.d/" ;\
+ $(INSTALL) -m 0644 privoxy.logrotate $(DESTDIR)/etc/logrotate.d/privoxy ;\
+ elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
+ $(ECHO) "Installing generic init script to $(DESTDIR)/etc/init.d/privoxy" ;\
$(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\
- $(INSTALL) $(INSTALL_P) privoxy-generic.init /etc/init.d/privoxy ;\
+ $(INSTALL) $(INSTALL_P) privoxy-generic.init $(DESTDIR)/etc/init.d/privoxy ;\
fi ;\
else \
$(ECHO) "No init script installed, install it manually if needed" ;\
$(RM) config.base config.tmp
@# mmmmm, good.
@$(ECHO) "$(PROGRAM_V) installation succeeded!"
- @$(ECHO) "The Privoxy configuration files have been installed in $(CONF_DEST)"
+ @$(ECHO) "The Privoxy configuration files have been installed in $(DESTDIR)$(CONF_DEST)"
# rmdir is used as a precaution since it will not remove non-empty
# directories. RH init script creates lock file and pid file.
uninstall: CONF_DEST LOG_DEST PID_DEST check_doc
@$(ECHO) Starting Privoxy uninstallation
@# KILL privoxy if running
- -@if [ -f /etc/redhat-release ] && [ -x /etc/rc.d/init.d/privoxy ]; then \
- /etc/rc.d/init.d/privoxy stop >/dev/null 2>/dev/null ;\
+ @# XXX: the chkconfig line may need a DESTDIR prefix.
+ -@if [ -f $(DESTDIR)/etc/redhat-release ] && [ -x $(DESTDIR)/etc/rc.d/init.d/privoxy ]; then \
+ $(DESTDIR)/etc/rc.d/init.d/privoxy stop >/dev/null 2>/dev/null ;\
chkconfig --del $(PROGRAM) 2>/dev/null;\
fi
- -@test -f $(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
- $(KILL) `$(CAT) $(PID_DEST)/privoxy.pid` || :
- -@test -f /var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
- $(KILL) `$(CAT) /var/run/privoxy.pid ` || :
+ -@test -f $(DESTDIR)$(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
+ $(KILL) `$(CAT) $(DESTDIR)$(PID_DEST)/privoxy.pid` || :
+ -@test -f $(DESTDIR)/var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
+ $(KILL) `$(CAT) $(DESTDIR)/var/run/privoxy.pid ` || :
@# Program binary
@$(ECHO) Removing $(PROGRAM) binary
- $(RM) $(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~
+ $(RM) $(DESTDIR)$(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~
@# config files and dir, and maybe old install backups
- -@if [ -d $(CONF_DEST) ]; then \
- $(ECHO) Saving $(PROGRAM) config files to /tmp/$(PROGRAM)-save ;\
- $(MKDIR) /tmp/$(PROGRAM)-save ;\
- cd $(CONF_DEST) ;\
- for i in $(CONFIGS); do \
- [ -f $$i ] && $(CP) $$i /tmp/$(PROGRAM)-save ;\
+ -@if [ -d $(DESTDIR)$(CONF_DEST) ]; then \
+ $(ECHO) Saving $(PROGRAM) config files to $(DESTDIR)/tmp/$(PROGRAM)-save ;\
+ $(MKDIR) $(DESTDIR)/tmp/$(PROGRAM)-save ;\
+ cd $(DESTDIR)$(CONF_DEST) ;\
+ for i in $(DESTDIR)$(CONFIGS); do \
+ [ -f $$i ] && $(CP) $$i $(DESTDIR)/tmp/$(PROGRAM)-save ;\
done ;\
fi
@$(ECHO) Removing $(PROGRAM) config files
- -@for i in $(CONFIGS); do \
+ -@for i in $(DESTDIR)$(CONFIGS); do \
test -f $(CONF_DEST)/$$i && $(ECHO) Removing $$i ;\
- $(RM) $(CONF_DEST)/$$i $(CONF_DEST)/$$i~ $(CONF_DEST)/$$i.new ;\
+ $(RM) $(DESTDIR)$(CONF_DEST)/$$i $(DESTDIR)$(CONF_DEST)/$$i~ $(DESTDIR)$(CONF_DEST)/$$i.new ;\
done
- -@test -d $(CONF_DEST)/templates && $(RM) -r $(CONF_DEST)/templates &&\
- $(ECHO) "Removing $(CONF_DEST)/templates/*"
+ -@test -d $(DESTDIR)$(CONF_DEST)/templates && $(RM) -r $(DESTDIR)$(CONF_DEST)/templates &&\
+ $(ECHO) "Removing $(DESTDIR)$(CONF_DEST)/templates/*"
@# man page and docs
@$(ECHO) Removing $(PROGRAM) docs
- -$(RM) $(MAN_DEST)/privoxy.1*
- -$(RM) -r $(DOC_DEST) || $(RM) -r $(prefix)/doc/privoxy
+ -$(RM) $(DESTDIR)$(MAN_DEST)/privoxy.1*
+ -$(RM) -r $(DESTDIR)$(DOC_DEST) || $(RM) -r $(DESTDIR)$(prefix)/doc/privoxy
- @# Log and jarfile and pidfile
+ @# Log and pidfile
@$(ECHO) Removing $(PROGRAM) logs
- -$(RM) $(LOG_DEST)/logfile $(PID_DEST)/privoxy.pid $(LOG_DEST)/jarfile
+ -$(RM) $(DESTDIR)$(LOG_DEST)/logfile $(DESTDIR)$(PID_DEST)/privoxy.pid
@# Final clean up of unused directories. Special handling of CONF and LOG
# destinations.
@$(ECHO) Removing $(PROGRAM) directories
- @for i in $(LOG_DEST) $(CONF_DEST); do \
+ @for i in $(DESTDIR)$(LOG_DEST) $(DESTDIR)$(CONF_DEST); do \
if test -d $$i; then \
$(ECHO) Removing $$i ;\
$(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
fi;\
done
@if [ ! "$(prefix)" = "/usr/local" ] ;then \
- for i in $(MAN_DEST) $(MAN_DIR) $(SHARE_DEST)/doc $(SHARE_DEST) $(SBIN_DEST); do \
+ for i in $(DESTDIR)$(MAN_DEST) $(DESTDIR)$(MAN_DIR) $(DESTDIR)$(SHARE_DEST)/doc \
+ $(DESTDIR)$(SHARE_DEST) $(DESTDIR)$(SBIN_DEST); do \
if test -d $$i; then \
$(ECHO) Removing $$i ;\
$(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
fi;\
done;\
- if test $(LOG_DEST) != /var/log/privoxy && test -d $(prefix)/var/log; then \
- $(ECHO) Removing $(prefix)/var/log ;\
- $(RMDIR) $(prefix)/var/log || $(ECHO) "$(prefix)/var/log is not empty, not removed";\
+ if test $(LOG_DEST) != /var/log/privoxy && test -d $(DESTDIR)$(prefix)/var/log; then \
+ $(ECHO) Removing $(DESTDIR)$(prefix)/var/log ;\
+ $(RMDIR) $(DESTDIR)$(prefix)/var/log || $(ECHO) "$(DESTDIR)$(prefix)/var/log is not empty, not removed";\
fi ;\
- if test $(PID_DEST) != /var/run && test -d $(prefix)/var/run; then \
- $(ECHO) Removing $(prefix)/var/run ;\
- $(RMDIR) $(prefix)/var/run || $(ECHO) "$(prefix)/var/run is not empty, not removed";\
+ if test $(PID_DEST) != /var/run && test -d $(DESTDIR)$(prefix)/var/run; then \
+ $(ECHO) Removing $(DESTDIR)$(prefix)/var/run ;\
+ $(RMDIR) $(DESTDIR)$(prefix)/var/run || $(ECHO) "$(DESTDIR)$(prefix)/var/run is not empty, not removed";\
fi ;\
- if test $(prefix)/var != /var && test -d $(prefix)/var; then \
- $(ECHO) Removing $(prefix)/var ;\
- $(RMDIR) $(prefix)/var || $(ECHO) "$(prefix)/var is not empty, not removed" ;\
+ if test $(prefix)/var != /var && test -d $(DESTDIR)$(prefix)/var; then \
+ $(ECHO) Removing $(DESTDIR)$(prefix)/var ;\
+ $(RMDIR) $(DESTDIR)$(prefix)/var || $(ECHO) "$(DESTDIR)$(prefix)/var is not empty, not removed" ;\
fi ;\
- if test $(prefix) != / && test $(prefix) != /usr && test -d $(prefix); then \
- $(ECHO) Removing $(prefix) ;\
- $(ECHO) Removing installation directory $(prefix) ;\
- $(RMDIR) $(prefix) || $(ECHO) "$(prefix) is not empty, not removed" ;\
+ if test $(prefix) != / && test $(prefix) != /usr && test -d $(DESTDIR)$(prefix); then \
+ $(ECHO) Removing $(DESTDIR)$(prefix) ;\
+ $(ECHO) Removing installation directory $(DESTDIR)$(prefix) ;\
+ $(RMDIR) $(DESTDIR)$(prefix) || $(ECHO) "$(DESTDIR)$(prefix) is not empty, not removed" ;\
fi;\
fi
@# init scripts and logrotate
@if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
$(ECHO) Removing $(PROGRAM) init script ;\
- if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
- $(RM) /etc/rc.d/rc.privoxy ;\
- elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
- $(RM) /etc/rc.d/init.d/privoxy /etc/logrotate.d/privoxy;\
- elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
- $(RM) /etc/init.d/privoxy ;\
+ if [ -f $(DESTDIR)/etc/slackware-version ] && \
+ [ -d $(DESTDIR)/etc/rc.d/ ] && [ -w $(DESTDIR)/etc/rc.d/ ] ; then \
+ $(RM) $(DESTDIR)/etc/rc.d/rc.privoxy ;\
+ elif [ -f $(DESTDIR)/etc/redhat-release ] && [ -d $(DESTDIR)/etc/rc.d/init.d/ ] \
+ && [ -w $(DESTDIR)/etc/rc.d/init.d/ ] ; then \
+ $(RM) $(DESTDIR)/etc/rc.d/init.d/privoxy $(DESTDIR)/etc/logrotate.d/privoxy;\
+ elif [ -d $(DESTDIR)/etc/init.d ] && [ -w $(DESTDIR)/etc/init.d ] ; then \
+ $(RM) $(DESTDIR)/etc/init.d/privoxy ;\
else \
$(ECHO) "Unable to remove privoxy init script, not installed or permission denied" ;\
fi ;\
@$(ECHO) Privoxy uninstalled, bye
coffee:
- @perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,101,0,109,143,205,13,192,32,8,133,\
- 239,78,241,110,234,1,28,160,171,152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,143,\
- 13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,69,253,36,102,81,49,83,236,19,225,171,131,\
- 214,172,163,73,4,168,123,115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,187,54,220,125,\
- 193,51,228,11,1,0,0);'|zcat
+ @perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,' \
+ -e '101,0,109,143,205,13,192,32,8,133,239,78,241,110,234,1,28,160,171,' \
+ -e '152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,' \
+ -e '143,13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,' \
+ -e '69,253,36,102,81,49,83,236,19,225,171,131,214,172,163,73,4,168,123,' \
+ -e '115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,' \
+ -e '187,54,220,125,193,51,228,11,1,0,0);' | zcat
#############################################################################
## end:
# $Log: GNUmakefile.in,v $
+# Revision 1.177 2009/01/13 16:44:32 fabiankeil
+# Delete the standard.action file after moving
+# the pre-settings over to the default actions.
+#
+# Revision 1.176 2008/09/21 13:24:37 fabiankeil
+# Add Roland's man page fixes from 19_manpage_fixup.dpatch.
+#
+# Revision 1.175 2008/08/30 12:03:07 fabiankeil
+# Remove FEATURE_COOKIE_JAR.
+#
+# Revision 1.174 2008/07/18 17:50:47 fabiankeil
+# Fix whitespace.
+#
+# Revision 1.173 2008/06/18 18:28:42 fabiankeil
+# Remove PDF-related stuff.
+#
+# Revision 1.172 2008/06/17 16:16:08 fabiankeil
+# - Stop building text files nobody cares about.
+# - Update copyright year.
+#
+# Revision 1.171 2008/06/13 15:24:57 fabiankeil
+# Move previously inline'd Perl code for the config-file target
+# into a separate file, have it work with older perl releases,
+# clean it up a bit and fix the "underlining" code.
+#
+# Revision 1.170 2008/06/12 16:38:50 fabiankeil
+# Add third-level domain to URL in dok-get target.
+#
+# Revision 1.169 2008/06/09 17:28:31 fabiankeil
+# - Recommend https for releasing files.
+# - Fix a warning about datarootdir being ignored.
+#
+# Revision 1.168 2008/05/23 18:03:12 fabiankeil
+# - Shorten meta description inserted in dok-webserver
+# and dok-index target.
+# - In config-file target, unset LANG for w3m as we
+# might otherwise end up with multi-byte characters.
+#
+# Revision 1.167 2008/05/23 14:39:09 fabiankeil
+# Silence dok-user complaint about @# not being found.
+#
+# Revision 1.166 2008/05/23 14:04:57 fabiankeil
+# - Get config-file target working with more recent Perl
+# versions. The generated file is still messed up, though.
+# - Fix comment typo.
+#
+# Revision 1.165 2008/05/22 16:57:23 fabiankeil
+# Fix coffee machine.
+#
+# Revision 1.164 2008/05/22 10:26:26 fabiankeil
+# - Remove parsers.@OBJEXT@'s dependency on encode.h.
+# - Include Emacs backup files in tidy target again.
+#
+# Revision 1.163 2008/05/04 18:01:53 fabiankeil
+# Dependency fixes: cgisimple.c and filters.c depend on urlmatch.h.
+#
+# Revision 1.162 2008/03/30 13:31:42 fabiankeil
+# Add DESTDIR support for the uninstall target.
+#
+# Revision 1.161 2008/03/30 13:19:13 fabiankeil
+# Add DESTDIR support for the install target. Closes PR#1910612.
+# Patch by Radoslaw Zielinski with minor modifications.
+#
+# Revision 1.160 2008/03/27 18:27:19 fabiankeil
+# Remove kill-popups action.
+#
+# Revision 1.159 2008/03/21 11:13:53 fabiankeil
+# Only gather host information if it's actually needed.
+# Also move the code out of accept_connection() so it's less likely
+# to delay other incoming connections if the host is misconfigured.
+#
+# Revision 1.158 2007/12/11 21:29:25 fabiankeil
+# Fix dependency list for cgiedit.c.
+#
+# Revision 1.157 2007/12/10 02:28:02 hal9
+# Unset $LANG for text processing of docs so we get pure text.
+#
+# Revision 1.156 2007/11/15 03:17:43 hal9
+# Some workaround changes to the config file perl stuff and comments, which is
+# broken here all by itself on perl 5.8.8.
+#
+# Revision 1.155 2007/09/22 16:23:25 fabiankeil
+# Update copyright line.
+#
+# Revision 1.154 2007/02/07 11:52:40 fabiankeil
+# Fix suse-dist as described in BR#1654052.
+# (I didn't test it, but it's done the same
+# way in redhat-dist which is known to work).
+#
+# Revision 1.153 2007/01/07 07:36:36 joergs
+# Added AmigaOS4 support.
+#
+# Revision 1.152 2006/12/13 14:53:51 etresoft
+# Include any existing LDFLAGS environment when linking so that a MacOS X Universal Binary can be created.
+#
+# Revision 1.151 2006/11/30 01:08:55 hal9
+# Fix problem with variable declarations in the Slackware section. Thanks to higuita.
+#
+# Revision 1.150 2006/10/25 11:55:45 fabiankeil
+# Fix sed regexes for rewriting "confdir ." and "logdir .".
+# Thanks to Darel Henman for reporting this.
+#
+# Revision 1.149 2006/10/11 01:40:28 hal9
+# Apply patch from Neil McCalden to fix syntax issue.
+#
# Revision 1.148 2006/09/26 10:57:58 hal9
# Including Karsten's patch to fix make create-snapshot.
#
projects / privoxy.git / blobdiff