--------------------------------------------------------------------
ChangeLog for Privoxy
--------------------------------------------------------------------
+*** Version 3.0.29 stable ***
+
+- Security/Reliability:
+ - Fixed memory leaks when a response is buffered and the buffer
+ limit is reached or Privoxy is running out of memory.
+ Commits bbd53f1010b and 4490d451f9b. OVE-20201118-0001.
+ Sponsored by: Robert Klemme
+ - Fixed a memory leak in the show-status CGI handler when
+ no action files are configured. Commit c62254a686.
+ OVE-20201118-0002.
+ Sponsored by: Robert Klemme
+ - Fixed a memory leak in the show-status CGI handler when
+ no filter files are configured. Commit 1b1370f7a8a.
+ OVE-20201118-0003.
+ Sponsored by: Robert Klemme
+ - Fixes a memory leak when client tags are active.
+ Commit 245e1cf32. OVE-20201118-0004.
+ Sponsored by: Robert Klemme
+ - Fixed a memory leak if multiple filters are executed
+ and the last one is skipped due to a pcre error.
+ Commit 5cfb7bc8fe. OVE-20201118-0005.
+ - Prevent an unlikely dereference of a NULL-pointer that
+ could result in a crash if accept-intercepted-requests
+ was enabled, Privoxy failed to get the request destination
+ from the Host header and a memory allocation failed.
+ Commit 7530132349. CID 267165. OVE-20201118-0006.
+ - Fixed memory leaks in the client-tags CGI handler when
+ client tags are configured and memory allocations fail.
+ Commit cf5640eb2a. CID 267168. OVE-20201118-0007.
+ - Fixed memory leaks in the show-status CGI handler when memory
+ allocations fail. Commit 064eac5fd0 and commit fdee85c0bf3.
+ CID 305233. OVE-20201118-0008.
+
+- General improvements:
+ - Added experimental https inspection support which allows to filter
+ https traffic. To enable it, install MbedTLS and configure with
+ --with-mbedtls, or install OpenSSL or LibreSSL and configure
+ with --with-openssl.
+ Afterwards configure the directives in section 7 of the
+ config file and enable the +https-inspection action.
+ Initial MbedTLS-based code contributed by Vaclav Svec,
+ initial OpenSSL support contributed by Maxim Antonov.
+ With help from Nedzad Hrnjica and Ho+ Ho+ Ho+.
+ Integration and improvements sponsored by Robert Klemme.
+ - pcrs: Request JIT compilation if it's supported and
+ the filter isn't dynamic. This can speed up filtering.
+ - Added support for Brotli decompression.
+ Sponsored by: Robert Klemme
+ - Added FEATURE_EXTENDED_STATISTICS to gather statistics for
+ block reasons and filter executions. To enable it, configure
+ with --enable-extended-statistics and visit
+ http://config.privoxy.org/show-status.
+ Sponsored by: Robert Klemme
+ - Use the IP_FREEBIND socket option, if defined. This allows
+ Privoxy to bind to not-yet assigned IP addresses which is
+ useful in failover environments.
+ Patch by Sam Varshavchik.
+ - Allow to use extended host patterns and vanilla host patterns
+ at the same time by prefixing extended host patterns with
+ "PCRE-HOST-PATTERN:". To enable this, configure with
+ --enable-pcre-host-patterns.
+ Sponsored by: Robert Klemme
+ - Added "Cross-origin resource sharing" (CORS) support.
+ This allows to access Privoxy's CGI interface via JavaScript from
+ another domain (white-listed with the new cors-allowed-origin directive).
+ Based on a patch by Nedzad Hrnjica.
+ Sponsored by: Robert Klemme.
+ - Add SOCKS5 username/password support.
+ Based on a patch by Sam, improved by Ivan Romanov.
+ Closes Patch#141 and solves TODO#105.
+ - Bump the maximum number of action and filter files
+ to 100 each.
+ Sponsored by: Robert Klemme
+ - Fixed handling of filters with "split-large-forms 1"
+ when using the CGI editor.
+ Reported by withoutname in #921.
+ - Better detect a mismatch of connection details when
+ figuring out whether or not a connection can be reused.
+ - Don't send a "Connection failure" message instead of the
+ "DNS failure" message.
+ Sponsored by: Robert Klemme
+ - Let LOG_LEVEL_REQUEST log all requests. Previously unencrypted
+ requests were only logged with LOG_LEVEL_REQUEST when they weren't
+ crunched (in which case they were logged with LOG_LEVEL_CRUNCH).
+ This was documented behaviour, but logging all requests seems more useful.
+ - Fixed locking around localtime() and gmtime().
+ - Removed OS/2 support. We haven't provided OS/2 packages in years,
+ it complicated the code and it depended on a fallback snprintf()
+ implementation which is GPLv2 only.
+ - Remove the fallback snprintf() implementation
+ Now that OS/2 support is gone we no longer need it.
+ - Fixed a bunch of format specifiers log messages.
+ - Added a missing apostrophe in the 'More Privoxy' menu.
+ - Explicitly prevent use of FEATURE_CONNECTION_SHARING
+ without FEATURE_CONNECTION_KEEP_ALIVE. It makes no sense
+ and does not compile anyway.
+ Sponsored by: Robert Klemme
+ - Fix build without FEATURE_CONNECTION_KEEP_ALIVE.
+ Sponsored by: Robert Klemme
+ - Downgrade the 'Graceful termination requested' message
+ to LOG_LEVEL_INFO as it isn't an error.
+ Sponsored by: Robert Klemme
+ - decompress_iob(): Downgrade the no-content message to LOG_LEVEL_RE_FILTER
+ While at it, fix a typo in a comment.
+ Sponsored by: Robert Klemme
+ - Fixed a couple of cppcheck warnings.
+ - Rename LOG_LEVEL_GPC to LOG_LEVEL_REQUEST.
+ Only the shadow knows what "GPC" is supposed to stand for.
+ - Remove SourceForge references in copyright headers.
+ - Upgrade a bunch of links to the homepage to https://.
+ - Add 'no-brotli-accepted' filter which prevents the
+ use of Brotli compression.
+ - Changed license for pcrs to GPLv2+ after getting the
+ permission from Andreas. This allows to redistribute
+ Privoxy under the GPLv3 which is required when linking
+ to future mbedTLS versions which are expected to be
+ licensed under the Apache 2.0 license only.
+ - Updated a bunch of tests that have to expect status code 403
+ now after r1.168/070e904afa5.
+ - Lowercase the host name in the request line.
+ - Only set SOURCE_DATE_EPOCH if it's not already set so
+ distributions can overwrite it through the environment.
+
+- Documentation changes:
+ - Explain that Privoxy has to be distributed under the
+ GPLv3 (or later) when linked with an MbedTLS version
+ that is licensed under the Apache 2.0 license.
+ - Import the GNU GPLv3 and include it the user manual.
+ - Clarify FEATURE_FORCE_LOAD's description. It allows to bypass
+ blocking not filtering and only does it if blocks aren't enforced.
+ Reported by: Robert Klemme
+ - FAQ: Remove Zwiebelfreunde e.V. from the list of fiduciary sponsors
+ As of 2021 they no longer handle donations for foreign organisations
+ due to lack of resources.
+ - FAQ: Remove an obsolete comment with a link to the long-gone PDF manual.
+ - FAQ: Add a link to the TODO list.
+ - FAQ: Change the sponsor amounts to USD slightly rounding the
+ converted amounts up to get simple numbers.
+ Receiving USD is apparently easier for SPI and SPI is
+ preferred by sponsors as they can send invoices.
+ - Advertise the client-tags CGI page in the user manual.
+ - Stop advertising the show-version CGI page which no longer exists.
+ - Add yet another reason why +prevent-compression may cause problems.
+ - Don't claim that contributors need ssh. It's only needed for committers.
+ - Replace obsolete CVS instructions with Git instructions.
+ - Remove an obsolete comment
+
+- Config file changes:
+ - Change the suggested default-server-timeout to 5 to match the
+ suggested keep-alive-timeout. Otherwise using the defaults would
+ result in Privoxy reducing the default-server-timeout and logging
+ an error message.
+ Sponsored by: Robert Klemme
+ - Update the 'debug 1' description.
+ - Add a missing 'client-specific-tag' directive.
+ - Comment out trusted-cgi-referer pointing to example.org.
+
+- Action file improvements:
+ - Block requests to /(.*/)?piwik\.php
+ - Block requests to .connectaserver.de/
+ - Block requests to pixel.inforsea.com/
+ - Block requests to t.vi-serve.com/
+ - Block requests to .ioam.de/
+ - Block requests to t.9gag.com/img.gif
+ - Block requests to .pixel.parsely.com/ as image
+ - Block requests to pixel.wp.com/
+ - Disable fast-redirects for .librarything.com/
+ - Disable fast-redirects for issue.freebsdfoundation.org/
+ - Disable fast-redirects for .twitter.com/.*origin=http
+ - Unblock belco24.de/
+ - Add fast-redirects exception for .wikipedia.org/
+ - Add fast-redirects exception for oss-fuzz.com/
+ - Disable fast-redirects for .consensu.org/delivery/pixel\.php
+ and block the requests as image instead
+ - Unblock .adbinstaller.com/
+ Reported by lvm in #942.
+ - Unblock .adbshell.com
+ Reported by lvm in #942.
+ - Unblock .tagesschau.de/
+ - Disable fast-redirects for collector.githubapp.com/
+ and block requests to it as image instead
+ - Unblock 'ada*.'
+ - Add fast-redirects{} exception for sourcepoint.vice.com/
+ - Unblock adaway.org/
+ Reported by DRS David Soft in AF#945.
+ - Change two block reasons that previously were the same.
+ Sponsored by: Robert Klemme
+ - Added a +delay-response{} test.
+ - Updated the location of the development version
+ of default.action.master.
+
+- Privoxy-Log-Parser:
+ - Added a --keep-date option to keep the date in highlighted messages.
+ - Highlight new log messages.
+ - Make gather_loglevel_clf_stats() more tolerant. While at it,
+ count all CLF messages as requests, even if the request is invalid.
+ - Only show HTTP version distribution if at least one version has been detected.
+ - Only show crunch statistics if crunches were detected.
+ - Warn if the request counts differ.
+ - Generate statistics if the log only contains LOG_LEVEL_CLF messages
+ so it can be used with vanilla webserver logs.
+ Previously Privoxy-specific "Request:" messages were required.
+ - Align the client-HTTP-version distribution like other distributions
+ - Bump version to 0.9.1
+ - Include status code distribution in the stats.
+ - Let the statistics include the size of the content Privoxy
+ transferred excluding HTTP headers.
+ - Get with the program and expect all requests to be logged with LOG_LEVEL_REQUEST.
+ It's no longer necessary to count both LOG_LEVEL_REQUEST and
+ LOG_LEVEL_CRUNCH messages to get the total number of requests.
+ - Leverage the LOG_LEVEL_CLF message to gather statistics that where
+ previously taken from LOG_LEVEL_HEADER lines. This results in less
+ confusing results if https inspection is enabled in which case there
+ are two LOG_LEVEL_HEADER lines with request lines.
+ Sponsored by: Robert Klemme
+ - Properly highlight the filter results message. Previously a brace got lost.
+ - Prefer the number of CLF lines to get the total number of requests
+ as it works with older Privoxy versions as well.
+
+- Privoxy-Regression-Test:
+ - Turn curl's globbing mode off so we can allow more characters in URLs.
+ - Allow '[' and ']' in URLs.
+ - Include the action file when complaining about missing Sticky Actions.
+ - Fix a sentence in the documentation.
+ - Bump version to 0.7.1
+
+- url-pattern-translator:
+ - Detect a couple of pattern prefixes case-insensitively.
+ Sponsored by: Robert Klemme
+ - Skip CLIENT-TAG patterns.
+ Sponsored by: Robert Klemme
+ - Skip patterns that have already been converted.
+ It should now be safe to "convert" a file multiple times.
+ Sponsored by: Robert Klemme
+ - Add the new 'PCRE-HOST-PATTERN:' prefix.
+ Sponsored by: Robert Klemme
+
+*** Version 3.0.28 stable ***
+
+- Bug fixes for regressions in 3.0.27:
+ - Fixed misplaced parentheses.
+ Reported by David Binderman.
+ - Changed two regression tests to depend on config directive
+ enable-remote-toggle instead of FEATURE_TOGGLE.
+
+*** Version 3.0.27 stable ***
+
+- General improvements:
+ - Add a receive-buffer-size directive which can be used to
+ set the size of the previously statically allocated buffer
+ in handle_established_connection().
+ Increasing the buffer size increases Privoxy's memory usage but
+ can lower the number of context switches and thereby reduce the
+ CPU usage and potentially increase the throughput.
+ This is mostly relevant for fast network connections and
+ large downloads that don't require filtering.
+ Sponsored by: Robert Klemme
+ - Add a listen-backlog directive which specifies the backlog
+ value passed to listen().
+ Sponsored by: Robert Klemme
+ - Add an enable-accept-filter directive which allows to
+ toggle accept filter support at run time when compiled
+ with FEATURE_ACCEPT_FILTER support.
+ It makes testing more convenient and now that it's
+ optional we can emit an error message if enabling
+ the accept filter fails.
+ Sponsored by: Robert Klemme
+ - Add a delay-response{} action.
+ This is useful to tar pit JavaScript requests that
+ are endlessly retried in case of blocks. It can also
+ be used to simulate a slow Internet connection.
+ Sponsored by: Robert Klemme
+ - Add a 'trusted-cgi-referrer' directive.
+ It allows to configure another page or site that can be used
+ to reach sensitive CGI resources.
+ Sponsored by: Robert Klemme
+ - Add a --fuzz mode which exposes Privoxy internals to input
+ from files or stdout.
+ Mainly tested with American Fuzzy Lop. For details see:
+ https://www.fabiankeil.de/talks/fuzzing-on-freebsd/
+ This work was partially funded with donations and done
+ as part of the Privoxy month in 2015.
+ - Consistently use the U(ngreedy) flag in the 'img-reorder' filter.
+ - listen_loop(): Reuse a single thread attribute object
+ The object doesn't change and creating a new one for
+ every thread is a waste of (CPU) time.
+ Sponsored by: Robert Klemme
+ - Free csp resources in the thread that belongs to the csp instead
+ of the main thread which has enough on its plate already.
+ Sponsored by: Robert Klemme
+ - Improve 'socket timeout reached' message.
+ Log the timeout that was triggered and downgrade the
+ log level to LOG_LEVEL_CONNECT to reduce the log noise
+ with common debug settings.
+ The timeout isn't necessary the result of an error and
+ usually merely indicates that Privoxy's socket timeout
+ is lower than the relevant timeouts used by client and
+ server.
+ Sponsored by: Robert Klemme
+ - Explicitly taint the server socket in case of CONNECT requests.
+ This doesn't fix any known problems, but makes
+ some log messages less confusing.
+ - Let write_pid_file() terminate if the pid file can't be opened.
+ Logging the issue at info level is unlikely to help.
+ - log_error(): Reduce the mutex-protected area by not using a
+ heap-allocated buffer that is shared between all threads.
+ This increases performance and reduces the latency with
+ verbose debug settings and multiple concurrent connections.
+ Sponsored by: Robert Klemme
+ - Let zalloc() use calloc() if it's available.
+ In some situations using calloc() can be faster than
+ malloc() + memset() and it should never be slower.
+ In the real world the impact of this change is not
+ expected to be noticeable.
+ Sponsored by: Robert Klemme
+ - Never use select() when poll() is available.
+ On most platforms select() is limited by FD_SETSIZE while
+ poll() is not. This was a scaling issue for multi-user setups.
+ Using poll() has no downside other than the usual risk
+ that code modifications may introduce new bugs that have
+ yet to be found and fixed.
+ At least in theory this commit could also reduce the latency
+ when there are lots of connections and select() would use
+ "bit fields in arrays of integers" to store file descriptors.
+ Another side effect is that Privoxy no longer has to stop
+ monitoring the client sockets when pipelined requests are
+ waiting but can't be read yet.
+ This code keeps the select()-based code behind ifdefs for
+ now but hopefully it can be removed soonish to make the
+ code more readable.
+ Sponsored by: Robert Klemme
+ - Add a 'reproducible-tarball-dist' target.
+ It's currently separate from the "tarball-dist" target
+ because it requires a tar implementation with mtree spec
+ support.
+ It's far from being perfect and does not enforce a
+ reproducible mode, but it's better than nothing.
+ - Use arc4random() if it's available.
+ While Privoxy doesn't need high quality pseudo-random numbers
+ there's no reason not to use them when we can and this silences
+ a warning emitted by code checkers that can't tell whether or not
+ the quality matters.
+ - Show the FEATURE_EXTERNAL_FILTERS status on the status page.
+ Better late than never. Previously a couple of tests weren't
+ executed as Privoxy-Regression-Test couldn't detect that the
+ FEATURE_EXTERNAL_FILTERS dependency was satisfied.
+ - Ditch FEATURE_IMAGE_DETECT_MSIE.
+ It's an obsolete workaround we inherited from Junkbuster
+ and was already disabled by default.
+ Users that feel the urge to work around issues with
+ image requests coming from an Internet Explorer version
+ from more than 15 years ago can still do this using tags.
+ - Consistently use strdup_or_die() instead of strdup() in
+ cases where allocation failures aren't expected.
+ Using strdup_or_die() allows to remove a couple of explicit
+ error checks which slightly reduces the size of the binary.
+ - Insert a refresh tag into the /client-tags CGI page when
+ serving it while a client-specific tag is temporarily enabled.
+ This makes it less likely that the user ends up
+ looking at tag state that is out of date.
+ - Use absolute URLs in the client-tag forms.
+ It's more consistent with the rest of the CGI page
+ URLs and makes it more convenient to copy the forms
+ to external pages.
+ - cgi_error_disabled(): Use status code 403 and an appropriate response line
+ - Use a dedicated CGI handler to deal with tag-toggle requests
+ As a result the /client-tags page is now safe to reach without
+ trusted Referer header which makes bookmarking or linking to
+ it more convenient.
+ Finally, refreshing the /client-tags page to show the
+ current state can no longer unintentionally repeat the
+ previous toggle request.
+ - Don't add a "Connection" header for CONNECT requests.
+ Explicitly sending "Connection: close" is not necessary and
+ apparently it causes problems with some forwarding proxies
+ that will close the connection prematurely.
+ Reported by Marc Thomas.
+ - Fix compiler warnings.
+
+- Bug fixes:
+ - rfc2553_connect_to(): Properly detect and log when poll()
+ reached the time out. Previously this was logged as:
+ Could not connect to [...]: No error: 0.
+ which isn't very helpful.
+ Sponsored by: Robert Klemme
+ - add_tag_for_client(): Set time_to_live properly.
+ Previously the time_to_live was always set for the first tag.
+ Attempts to temporarily enable a tag would result in enabling
+ it permanently unless no tag was enabled already.
+ - Revert r1.165 which didn't perform as advertised.
+ While the idea was to use "https:// when creating links
+ for the user manual on the website", the actual effect
+ was to use "https://" when Privoxy was supposed to serve
+ the user manual itself.
+ Reported by Yossi Zahn on Privoxy-devel@.
+ - socks5_connect(): Fail in case of unsupported address types.
+ Previously they would not be detected right away and
+ Privoxy would fail later on with an error message that
+ didn't make it obvious that the problem was socks-related.
+ So far, no such problems have actually been reported.
+ - socks5_connect(): Properly deal with socks replies that
+ contain IPv6 addresses.
+ Previously parts of the reply were left unread and
+ later on treated as invalid HTTP response data.
+ Fixes #904 reported by Danny Goossen who also provided
+ the initial version of this patch.
+
+- Action file improvements:
+ - Unblock 'msdn.microsoft.com/'.
+ It (presumably) isn't used to serve the kind of ads Privoxy should
+ block by default but happens to serve lots of pages with URLs that
+ are likely to result in false positives.
+ Reported by bugreporter1694 in AF#939.
+ - Disable gif deanimation for requests tagged with CSS-REQUEST.
+ The action will ignore content that isn't considered text
+ anyway and explicitly disabling it makes this more obvious
+ if "action" debugging (debug 65536) is enabled while
+ "gif deanimation" debugging (debug 256) isn't.
+ - Explicitly disable HTML filters for requests with CSS-REQUEST tag.
+ The filters are unlikely to break CSS files but executing
+ them without (intentionally) getting any hits is a waste of
+ cpu time and makes the log more noisy when running with
+ "debug 64".
+ - Unblock 'adventofcode.com/'.
+ Reported by Clint Adams in Debian bug #848211.
+ Fixes Roland's AF#937.
+ - Unblock 'adlibris.com'.
+ Reported by Wyrex in #935
+ - Unblock .golang.org/
+ - Add fast-redirects exception for '.youtube.com/.*origin=http'
+
+- Privoxy-Log-Parser:
+ - Don't gather host and resource statistics if they aren't requested.
+ While the performance impact seems negligible this significantly
+ reduces the memory usage if there are lots of requests.
+ - Bump version as the behaviour (slightly) changed.
+ - Count connection failures as well in statistics mode.
+ Sponsored by: Robert Klemme
+ - Count connection timeouts as well in statistics mode.
+ Sponsored by: Robert Klemme
+ - Fix an 'uninitialized value' warning when generating
+ statistics for a log file without response headers.
+ While privoxy-log-parser was supposed to detect this already,
+ the check was flawed and the message the user didn't see was
+ somewhat confusing anyway.
+ Now the message is less confusing, more helpful and actually printed.
+ Reported by: Robert Klemme
+
+- Documentation improvements:
+ - Refer to the git sources instead of CVS.
+ - Use GNU/Linux when referring to the OS instead of the kernel.
+ - Add FAQ entry for what to do if editing the config file is access denied.
+ - Add brief HTTP/2 FAQ.
+ - Add a small fuzzing section to the developer documentation.
+ - Add a client-header-tagger{client-ip-address} example.
+ - Stop suggesting that Privoxy is an anonymizing proxy.
+ The term could lead to Privoxy users overestimating
+ what it can do on its own (without Tor).
+ - Make it more obvious that SPI accepts Paypal, too.
+ Currently most donations are made through the Paypal account
+ managed by Zwiebelfreunde e.V. and a more even distribution
+ would be useful.
+ - Suggest to log applying actions as well when reproducing problems.
+ - Explicitly mention that Privoxy binaries are built by individuals
+ on their own systems. Buyer beware!
+ - Mention the release feed on the homepage.
+ - Remove a mysterious comment with a GNU FDL link as it isn't
+ useful and could confuse license scanners.
+ In May 2002 it was briefly claimed that "this document" was covered
+ by the GNU FDL. The commit message (r1.5) doesn't explain the motivation
+ or whether all copyright holders were actually asked and agreed to the
+ declared license change.
+ It's thus hard to tell whether or not the license change was legit,
+ but luckily two days later the "doc license" was "put" "back to GPL"
+ anyway (r1.6).
+ At the same time the offending comment with a link to the FDL
+ (not the GPL) was added for no obvious reason.
+ Now it's gone again.
+
+- Regression tests:
+ - Bump for-privoxy-version to 3.0.27 as we now rely on untrusted
+ CGI request being rejected with status code 403 (instead of 200).
+ - Update test for /send-stylesheet and add another one
+
+- Templates:
+ - Consistently use https:// when linking to the Privoxy website.
+ - Remove SourceForge references in Copyright header.
+ - Remove a couple of SourceForge references in a comment.
+ While at it, fix the grammar.
+ - Move the site-specific documentation block before the generic one.
+ While most Privoxy installations don't have a site-specific
+ documentation block, in cases were it exists it's likely to
+ be more relevant than the generic one.
+ Showing it first makes it less likely that users stop reading
+ before they reach it, especially on pages that don't fit on
+ the screen.
+
+- Build system improvements:
+ - Prefer openjade to jade. On some systems Jade produces
+ HTML with unescaped ampersands in URLs.
+ - Prefer OpenSP to SP to be consistent.
+ - Have Docbook generated HTML files be straight ASCII.
+ Dealing with a mixture of ISO-8859 and UTF-8 files is problematic.
+ - Echo the filename to stderr for 'make dok-tidy'.
+ Make it a bit easier to find errors in docbook generated HTML.
+ - Warn when still using select().
+ - Warn when compiling without calloc().
+ - Make it more obvious that the --with-fdsetsize configure switch
+ is pointless if poll() is available.
+ - Remove support for AmigaOS.
+ - Update windows build system to use supported software.
+ The cygwin gcc -mno-cygwin option is no longer supported, so
+ convert the windows build system to use the cygwin cross-compiler
+ to build "native" code.
+ - Add --enable-static-linking option for configure
+ does the same thing as LDFLAGS=-static; ./configure
+ but nicer than mixing evars and configure options.
+
+*** Version 3.0.26 stable ***
+
+- Bug fixes:
+ - Fixed crashes with "listen-addr :8118" (SF Bug #902).
+ The regression was introduced in 3.0.25 beta and reported
+ by Marvin Renich in Debian bug #834941.
+
+- General improvements:
+ - Log when privoxy is toggled on or off via cgi interface.
+ - Highlight the "Info: Now toggled " on/off log message
+ in the Windows log viewer.
+ - Highlight the loading actions/filter file log message
+ in the Windows log viewer.
+ - Mention client-specific tags on the toggle page as a
+ potentionally more appropriate alternative.
+
+- Documentation improvements:
+ - Update download section on the homepage.
+ The downloads are available from the website now.
+ - Add sponsor FAQ.
+ - Remove obsolete reference to mailing lists hosted at SourceForge.
+ - Update the "Before the Release" section of the developer manual.
+
+- Infrastructure improvements:
+ - Add perl script to generate an RSS feed for the packages
+ Submitted by "Unknown".
+
+- Build system improvements:
+ - strptime.h: fix a compiler warning about ambiguous else.
+ - configure.in: Check for Docbook goo on the BSDs as well.
+ - GNUMakefile.in: Let the dok-user target remove temporary files.
+
+*** Version 3.0.25 beta ***
+
+- Bug fixes:
+ - Always use the current toggle state for new requests.
+ Previously new requests on reused connections inherited
+ the toggle state from the previous request even though
+ the toggle state could have changed.
+ Reported by Robert Klemme.
+ - Fixed two buffer-overflows in the (deprecated) static
+ pcre code. These bugs are not considered security issues
+ as the input is trusted.
+ Found with afl-fuzz and ASAN.
+
+- General improvements:
+ - Added support for client-specific tags which allow Privoxy
+ admins to pre-define tags that are set for all requests from
+ clients that previously opted in through the CGI interface.
+ They are useful in multi-user setups where admins may
+ want to allow users to disable certain actions and filters
+ for themselves without affecting others.
+ In single-user setups they are useful to allow more fine-grained
+ toggling. For example to disable request blocking while still
+ crunching cookies, or to disable experimental filters only.
+ This is an experimental feature, the syntax and behaviour may
+ change in future versions.
+ Sponsored by Robert Klemme.
+ - Dynamic filters and taggers now support a $listen-address variable
+ which contains the address the request came in on.
+ For external filters the variable is called $PRIVOXY_LISTEN_ADDRESS.
+ Original patch contributed by pursievro.
+ - Add client-header-tagger 'listen-address'.
+ - Include the listen-address in the log message when logging new requests.
+ Patch contributed by pursievro.
+ - Turn invalid max-client-connections values into fatal errors.
+ - The show-status page now shows whether or not dates before 1970
+ and after 2038 are expected to be handled properly.
+ This is mainly useful for Privoxy-Regression-Test but could
+ also come handy when dealing with time-related support requests.
+ - On Mac OS X the thread id in log messages are more likely to
+ be unique now.
+ - When complaining about missing filters, the filter type is logged
+ as well.
+ - A couple of harmless coverity warnings were silenced
+ (CID #161202, CID #161203, CID #161211).
+
+- Action file improvements:
+ - Filtering is disabled for Range requests to let download resumption
+ and Windows updates work with the default configuration.
+ - Unblock ".ardmediathek.de/".
+ Reported by ThTomate in #932.
+
+- Documentation improvements:
+ - Add FAQ entry for crashes caused by memory limits.
+ - Remove obsolete FAQ entry about a bug in PHP 4.2.3.
+ - Mention the new mailing lists were appropriate.
+ As the archives have not been migrated, continue to
+ mention the archives at SF in the contacting section
+ for now.
+ - Note that the templates should be adjusted if Privoxy is
+ running as intercepting proxy without getting all requests.
+ - A bunch of links were converted to https://.
+ - Rephrase onion service paragraph to make it more obvious
+ that Tor is involved and that the whole website (and not
+ just the homepage) is available as onion service.
+ - Streamline the "More information" section on the homepage further
+ by additionally ditching the link to the 'See also' section
+ of the user manual. The section contains mostly links that are
+ directly reachable from the homepage already and the rest is
+ not significant enough to get a link from the homepage.
+ - Change the add-header{} example to set the DNT header
+ and use a complete section to make copy and pasting
+ more convenient.
+ Add a comment to make it obvious that adding the
+ header is not recommended for obvious reasons.
+ Using the DNT header as example was suggested by
+ Leo Wzukw.
+ - Streamline the support-and-service template
+ Instead of linking to the various support trackers
+ (whose URLs hopefully change soon), link to the
+ contact section of the user manual to increase the
+ chances that users actually read it.
+ - Add a FAQ entry for tainted sockets.
+ - More sections in the documentation have stable URLs now.
+ - FAQ: Explain why 'ping config.privoxy.org' is not expected
+ to reach a local Privoxy installation.
+ - Note that donations done through Zwiebelfreunde e.V. currently
+ can't be checked automatically.
+ - Updated section regarding starting Privoxy under OS X.
+ - Use dedicated start instructions for FreeBSD and ElectroBSD.
+ - Removed release instructions for AIX. They haven't been working
+ for years and unsurprisingly nobody seems to care.
+ - Removed obsolete reference to the solaris-dist target.
+ - Updated the release instructions for FreeBSD.
+ - Removed unfinished release instructions for Amiga OS and HP-UX 11.
+ - Added a pointer to the Cygwin Time Machine for getting the last release of
+ Cygwin version 1.5 to use for building Privoxy on Windows.
+ - Various typos have been fixed.
+
+- Infrastructure improvements:
+ - The website is no longer hosted at SourceForge and
+ can be reached through https now.
+ - The mailing lists at SourceForge have been deprecated,
+ you can subscribe to the new ones at: https://lists.privoxy.org/
+ - Migrating the remaining services from SourceForge is
+ work in progress (TODO list item #53).
+
+- Build system improvements:
+ - Add configure argument to optimistically redefine FD_SETSIZE
+ with the intent to change the maximum number of client
+ connections Privoxy can handle. Only works with some libcs.
+ Sponsored by Robert Klemme.
+ - Let the tarball-dist target skip files in ".git".
+ - Let the tarball-dist target work in cwds other than current.
+ - Make the 'clean' target faster when run from a git repository.
+ - Include tools in the generic distribution.
+ - Let the gen-dist target work in cwds other than current.
+ - Sort find output that is used for distribution tarballs
+ to get reproducible results.
+ - Don't add '-src' to the name of the tar ball generated by the
+ gen-dist target. The package isn't a source distribution but a
+ binary package.
+ While at it, use a variable for the name to reduce the chances
+ that the various references get out of sync and fix the gen-upload
+ target which was looking in the wrong directory.
+ - Add regression-tests.action to the files that are distributed.
+ - The gen-dist target which was broken since 2002 (r1.92) has been fixed.
+ - Remove genclspec.sh which has been obsolete since 2009.
+ - Remove obsolete reference to Redhat spec file.
+ - Remove the obsolete announce target which has been commented out years ago.
+ - Let rsync skip files if the checksums match.
+
+- Privoxy-Regression-Test:
+ - Add a "Default level offset" directive which can be used to
+ change the default level by a given value.
+ This directive affects all tests located after it until the end
+ of the file or a another "Default level offset" directive is reached.
+ The purpose of this directive is to make it more convenient to skip
+ similar tests in a given file without having to remove or disable
+ the tests completely.
+ - Let test level 17 depend on FEATURE_64_BIT_TIME_T
+ instead of FEATURE_PTHREAD which has no direct connection
+ to the time_t size.
+ - Fix indentation in perldoc examples.
+ - Don't overlook directives in the first line of the action file.
+ - Bump version to 0.7.
+ - Fix detection of the Privoxy version now that https://
+ is used for the website.
+
*** Version 3.0.24 stable ***
- Security fixes (denial of service):
- Prevent invalid reads in case of corrupt chunk-encoded content.
- Bug discovered with afl-fuzz and AddressSanitizer.
+ CVE-2016-1982. Bug discovered with afl-fuzz and AddressSanitizer.
- Remove empty Host headers in client requests.
- Previously they would result in invalid reads.
+ Previously they would result in invalid reads. CVE-2016-1983.
Bug discovered with afl-fuzz and AddressSanitizer.
- Bug fixes:
- Fixed buffer scaling in execute_external_filter() that could lead
to crashes. Submitted by Yang Xia in #892.
- Fixed crashes when executing external filters on platforms like
- Mac OS X. Reported by Jonathan McKenzie on ijbswa-users@
+ Mac OS X. Reported by Jonathan McKenzie on ijbswa-users@.
- Properly parse ACL directives with ports when compiled with HAVE_RFC2553.
Previously the port wasn't removed from the host and in case of
'permit-access 127.0.0.1 example.org:80' Privoxy would try (and fail)
Reported by u302320 in #924.
- Add two fast-redirect exceptions for "yandex.ru".
- Disable filter{banners-by-size} for ".plasmaservice.de/".
- - Unblock klikki.fi/adv/.
+ - Unblock "klikki.fi/adv/".
- Block requests for "resources.infolinks.com/".
Reported by "Black Rider" on ijbswa-users@.
- Block a bunch of criteo domains.
if connection-sharing is enabled.
- A TODO list has been added to the source tarball to give potential
volunteers a better idea of what the current goals are. Donations
- are still welcome too: http://www.privoxy.org/faq/general.html#DONATE
+ are still welcome too: https://www.privoxy.org/faq/general.html#DONATE
*** Version 3.0.12 ***
----------------------------------------------------------------------
-Copyright : Written by and Copyright (C) 2001-2016 the
- Privoxy team. http://www.privoxy.org/
+Copyright : Written by and Copyright (C) 2001-2020 the
+ Privoxy team. https://www.privoxy.org/
Based on the Internet Junkbuster originally written
by and Copyright (C) 1997 Anonymous Coders and
projects / privoxy.git / blobdiff