+*** Version 3.0.27 stable ***
+
+- General improvements:
+ - Add a receive-buffer-size directive which can be used to
+ set the size of the previously statically allocated buffer
+ in handle_established_connection().
+ Increasing the buffer size increases Privoxy's memory usage but
+ can lower the number of context switches and thereby reduce the
+ CPU usage and potentially increase the throughput.
+ This is mostly relevant for fast network connections and
+ large downloads that don't require filtering.
+ Sponsored by: Robert Klemme
+ - Add a listen-backlog directive which specifies the backlog
+ value passed to listen().
+ Sponsored by: Robert Klemme
+ - Add an enable-accept-filter directive which allows to
+ toggle accept filter support at run time when compiled
+ with FEATURE_ACCEPT_FILTER support.
+ It makes testing more convenient and now that it's
+ optional we can emit an error message if enabling
+ the accept filter fails.
+ Sponsored by: Robert Klemme
+ - Add a delay-response{} action.
+ This is useful to tar pit JavaScript requests that
+ are endlessly retried in case of blocks. It can also
+ be used to simulate a slow Internet connection.
+ Sponsored by: Robert Klemme
+ - Add a 'trusted-cgi-referrer' directive.
+ It allows to configure another page or site that can be used
+ to reach sensitive CGI resources.
+ Sponsored by: Robert Klemme
+ - Add a --fuzz mode which exposes Privoxy internals to input
+ from files or stdout.
+ Mainly tested with American Fuzzy Lop. For details see:
+ https://www.fabiankeil.de/talks/fuzzing-on-freebsd/
+ This work was partially funded with donations and done
+ as part of the Privoxy month in 2015.
+ - Consistently use the U(ngreedy) flag in the 'img-reorder' filter
+ - listen_loop(): Reuse a single thread attribute object
+ The object doesn't change and creating a new one for
+ every thread is a waste of (CPU) time.
+ Sponsored by: Robert Klemme
+ - Free csp resources in the thread that belongs to the csp instead
+ of the main thread which has enough on its plate already.
+ Sponsored by: Robert Klemme
+ - Improve 'socket timeout reached' message.
+ Log the timeout that was triggered and downgrade the
+ log level to LOG_LEVEL_CONNECT to reduce the log noise
+ with common debug settings.
+ The timeout isn't necessary the result of an error and
+ usually merely indicates that Privoxy's socket timeout
+ is lower than the relevant timeouts used by client and
+ server.
+ Sponsored by: Robert Klemme
+ - Explicitly taint the server socket in case of CONNECT requests.
+ This doesn't fix any known problems, but makes
+ some log messages less confusing.
+ - Remove a mysterious comment with a GNU FDL link as it isn't
+ useful and could confuse license scanners.
+ In May 2002 it was briefly claimed that "this document" was covered
+ by the GNU FDL. The commit message (r1.5) doesn't explain the motivation
+ or whether all copyright holders were actually asked and agreed to the
+ declared license change.
+ It's thus hard to tell whether or not the license change was legit,
+ but luckily two days later the "doc license" was "put" "back to GPL"
+ anyway (r1.6).
+ At the same time the offending comment with a link to the FDL
+ (not the GPL) was added for no obvious reason.
+ Now it's gone again.
+ - Let write_pid_file() terminate if the pid file can't be opened
+ Logging the issue at info level is unlikely to help.
+ - log_error(): Reduce the mutex-protected area by not using a
+ heap-allocated buffer that is shared between all threads.
+ This increases performance and reduces the latency with
+ verbose debug settings and multiple concurrent connections.
+ Sponsored by: Robert Klemme
+ - Let zalloc() use calloc() if it's available.
+ In some situations using calloc() can be faster than
+ malloc() + memset() and it should never be slower.
+ In the real world the impact of this change is not
+ expected to be noticeable.
+ Sponsored by: Robert Klemme
+ - Never use select() when poll() is available.
+ On most platforms select() is limited by FD_SETSIZE while
+ poll() is not. This was a scaling issue for multi-user setups.
+ Using poll() has no downside other than the usual risk
+ that code modifications may introduce new bugs that have
+ yet to be found and fixed.
+ At least in theory this commit could also reduce the latency
+ when there are lots of connections and select() would use
+ "bit fields in arrays of integers" to store file descriptors.
+ Another side effect is that Privoxy no longer has to stop
+ monitoring the client sockets when pipelined requests are
+ waiting but can't be read yet.
+ This code keeps the select()-based code behind ifdefs for
+ now but hopefully it can be removed soonish to make the
+ code more readable.
+ Sponsored by: Robert Klemme
+ - Add a 'reproducible-tarball-dist' target.
+ It's currently separate from the "tarball-dist" target
+ because it requires a tar implementation with mtree spec
+ support.
+ It's far from being perfect and does not enforce a
+ reproducible mode, but it's better than nothing.
+ - Use arc4random() if it's available.
+ While Privoxy doesn't need high quality pseudo-random numbers
+ there's no reason not to use them when we can and this silences
+ a warning emitted by code checkers that can't tell whether or not
+ the quality matters.
+ - Show the FEATURE_EXTERNAL_FILTERS status on the status page.
+ Better late than never. Previously a couple of tests weren't
+ executed as Privoxy-Regression-Test couldn't detect that the
+ FEATURE_EXTERNAL_FILTERS dependency was satisfied.
+ - Ditch FEATURE_IMAGE_DETECT_MSIE.
+ It's an obsolete workaround we inherited from Junkbuster
+ and was already disabled by default.
+ Users that feel the urge to work around issues with
+ image requests coming from an Internet Explorer version
+ from more than 15 years ago can still do this using tags.
+ - Consistently use strdup_or_die() instead of strdup() in
+ cases where allocation failures aren't expected.
+ Using strdup_or_die() allows to remove a couple of explicit
+ error checks which slightly reduces the size of the binary.
+ - Insert a refresh tag into the /client-tags CGI page when
+ serving it while a client-specific tag is temporarily enabled.
+ This makes it less likely that the user ends up
+ looking at tag state that is out of date.
+ - Use absolute URLs in the client-tag forms.
+ It's more consistent with the rest of the CGI page
+ URLs and makes it more convenient to copy the forms
+ to external pages.
+ - cgi_error_disabled(): Use status code 403 and an appropriate response line
+ - Use a dedicated CGI handler to deal with tag-toggle requests
+ As a result the /client-tags page is now safe to reach without
+ trusted Referer header which makes bookmarking or linking to
+ it more convenient.
+ Finally, refreshing the /client-tags page to show the
+ current state can no longer unintentionally repeat the
+ previous toggle request.
+ - Don't add a "Connection" header for CONNECT requests
+ Explicitly sending "Connection: close" is not necessary and
+ apparently it causes problems with some forwarding proxies
+ that will close the connection prematurely.
+ Reported by Marc Thomas.
+ - Fix compiler warnings.
+
+- Bug fixes:
+ - rfc2553_connect_to(): Properly detect and log when poll()
+ reached the time out. Previously this was logged as:
+ Could not connect to [...]: No error: 0.
+ which isn't very helpful.
+ Sponsored by: Robert Klemme
+ - add_tag_for_client(): Set time_to_live properly.
+ Previously the time_to_live was always set for the first tag.
+ Attempts to temporarily enable a tag would result in enabling
+ it permanently unless no tag was enabled already.
+ - Revert r1.165 which didn't perform as advertised.
+ While the idea was to use "https:// when creating links
+ for the user manual on the website", the actual effect
+ was to use "https://" when Privoxy was supposed to serve
+ the user manual itself.
+ Reported by Yossi Zahn on Privoxy-devel@.
+ - socks5_connect(): Fail in case of unsupported address types.
+ Previously they would not be detected right away and
+ Privoxy would fail later on with an error message that
+ didn't make it obvious that the problem was socks-related.
+ So far, no such problems have actually been reported.
+ - socks5_connect(): Properly deal with socks replies that
+ contain IPv6 addresses.
+ Previously parts of the reply were left unread and
+ later on treated as invalid HTTP response data.
+ Fixes #904 reported by Danny Goossen who also provided
+ the initial version of this patch.
+
+- Action file improvements:
+ - Unblock 'msdn.microsoft.com/'.
+ It (presumably) isn't used to serve the kind of ads Privoxy should
+ block by default but happens to serve lots of pages with URLs that
+ are likely to result in false positives.
+ Reported by bugreporter1694 in AF#939.
+ - Disable gif deanimation for requests tagged with CSS-REQUEST.
+ The action will ignore content that isn't considered text
+ anyway and explicitly disabling it makes this more obvious
+ if "action" debugging (debug 65536) is enabled while
+ "gif deanimation" debugging (debug 256) isn't.
+ - Explicitly disable HTML filters for requests with CSS-REQUEST tag.
+ The filters are unlikely to break CSS files but executing
+ them without (intentionally) getting any hits is a waste of
+ cpu time and makes the log more noisy when running with
+ "debug 64".
+ - Unblock 'adventofcode.com/'.
+ Reported by Clint Adams in Debian bug #848211.
+ Fixes Roland's AF#937.
+ - Unblock 'adlibris.com'.
+ Reported by Wyrex in #935
+ - Unblock .golang.org/
+ - Add fast-redirects exception for '.youtube.com/.*origin=http'
+
+- Privoxy-Log-Parser:
+ - Don't gather host and resource statistics if they aren't requested.
+ While the performance impact seems negligible this significantly
+ reduces the memory usage if there are lots of requests.
+ - Bump version as the behaviour (slightly) changed.
+ - Count connection failures as well in statistics mode.
+ Sponsored by: Robert Klemme
+ - Count connection timeouts as well in statistics mode.
+ Sponsored by: Robert Klemme
+ - Fix an 'uninitialized value' warning when generating
+ statistics for a log file without response headers.
+ While privoxy-log-parser was supposed to detect this already,
+ the check was flawed and the message the user didn't see was
+ somewhat confusing anyway.
+ Now the message is less confusing, more helpful and actually printed.
+ Reported by: Robert Klemme
+
+- Documentation improvements:
+ - Refer to the git sources instead of CVS.
+ - Use GNU/Linux when referring to the OS instead of the kernel.
+ - Add FAQ entry for what to do if editing the config file is access denied.
+ - Add brief HTTP/2 FAQ.
+ - Add a small fuzzing section to the developer documentation.
+ - Add a client-header-tagger{client-ip-address} example.
+ - Stop suggesting that Privoxy is an anonymizing proxy.
+ The term could lead to Privoxy users overestimating
+ what it can do on its own (without Tor).
+ - Make it more obvious that SPI accepts Paypal, too.
+ Currently most donations are made through the Paypal account
+ managed by Zwiebelfreunde e.V. and a more even distribution
+ would be useful.
+ - Suggest to log applying actions as well when reproducing problems.
+ - Explicitly mention that Privoxy binaries are built by individuals
+ on their own systems. Buyer beware!
+ - Mention the release feed on the homepage.
+
+- Regression tests:
+ - Bump for-privoxy-version to 3.0.27 as we now rely on untrusted
+ CGI request being rejected with status code 403 (instead of 200).
+ - Update test for /send-stylesheet and add another one
+
+- Templates
+ - Consistently use https:// when linking to the Privoxy website.
+ - Remove SourceForge references in Copyright header.
+ - Remove a couple of SourceForge references in a comment.
+ While at it, fix the grammar.
+ - Move the site-specific documentation block before the generic one.
+ While most Privoxy installations don't have a site-specific
+ documentation block, in cases were it exists it's likely to
+ be more relevant than the generic one.
+ Showing it first makes it less likely that users stop reading
+ before they reach it, especially on pages that don't fit on
+ the screen.
+
+- Build system improvements:
+ - Prefer openjade to jade. On some systems Jade produces
+ HTML with unescaped ampersands in URLs.
+ - Prefer OpenSP to SP to be consistent.
+ - Have Docbook generated HTML files be straight ASCII.
+ Dealing with a mixture of ISO-8859 and UTF-8 files is problematic.
+ - Echo the filename to stderr for 'make dok-tidy'.
+ Make it a bit easier to find errors in docbook generated HTML.
+ - Warn when still using select().
+ - Warn when compiling without calloc().
+ - Make it more obvious that the --with-fdsetsize configure switch
+ is pointless if poll() is available.
+ - Remove support for AmigaOS.
+ - Update windows build system to use supported software.
+ The cygwin gcc -mno-cygwin option is no longer supported, so
+ convert the windows build system to use the cygwin cross-compiler
+ to build "native" code.
+ - Add --enable-static-linking option for configure
+ does the same thing as LDFLAGS=-static; ./configure
+ but nicer than mixing evars and configure options.
+
+*** Version 3.0.26 stable ***
+
+- Bug fixes:
+ - Fixed crashes with "listen-addr :8118" (SF Bug #902).
+ The regression was introduced in 3.0.25 beta and reported
+ by Marvin Renich in Debian bug #834941.
+
+- General improvements:
+ - Log when privoxy is toggled on or off via cgi interface.
+ - Highlight the "Info: Now toggled " on/off log message
+ in the Windows log viewer.
+ - Highlight the loading actions/filter file log message
+ in the Windows log viewer.
+ - Mention client-specific tags on the toggle page as a
+ potentionally more appropriate alternative.
+
+- Documentation improvements:
+ - Update download section on the homepage.
+ The downloads are available from the website now.
+ - Add sponsor FAQ.
+ - Remove obsolete reference to mailing lists hosted at SourceForge.
+ - Update the "Before the Release" section of the developer manual.
+
+- Infrastructure improvements:
+ - Add perl script to generate an RSS feed for the packages
+ Submitted by "Unknown".
+
+- Build system improvements:
+ - strptime.h: fix a compiler warning about ambiguous else.
+ - configure.in: Check for Docbook goo on the BSDs as well.
+ - GNUMakefile.in: Let the dok-user target remove temporary files.
+
+*** Version 3.0.25 beta ***
+
+- Bug fixes:
+ - Always use the current toggle state for new requests.
+ Previously new requests on reused connections inherited
+ the toggle state from the previous request even though
+ the toggle state could have changed.
+ Reported by Robert Klemme.
+ - Fixed two buffer-overflows in the (deprecated) static
+ pcre code. These bugs are not considered security issues
+ as the input is trusted.
+ Found with afl-fuzz and ASAN.
+
+- General improvements:
+ - Added support for client-specific tags which allow Privoxy
+ admins to pre-define tags that are set for all requests from
+ clients that previously opted in through the CGI interface.
+ They are useful in multi-user setups where admins may
+ want to allow users to disable certain actions and filters
+ for themselves without affecting others.
+ In single-user setups they are useful to allow more fine-grained
+ toggling. For example to disable request blocking while still
+ crunching cookies, or to disable experimental filters only.
+ This is an experimental feature, the syntax and behaviour may
+ change in future versions.
+ Sponsored by Robert Klemme.
+ - Dynamic filters and taggers now support a $listen-address variable
+ which contains the address the request came in on.
+ For external filters the variable is called $PRIVOXY_LISTEN_ADDRESS.
+ Original patch contributed by pursievro.
+ - Add client-header-tagger 'listen-address'.
+ - Include the listen-address in the log message when logging new requests.
+ Patch contributed by pursievro.
+ - Turn invalid max-client-connections values into fatal errors.
+ - The show-status page now shows whether or not dates before 1970
+ and after 2038 are expected to be handled properly.
+ This is mainly useful for Privoxy-Regression-Test but could
+ also come handy when dealing with time-related support requests.
+ - On Mac OS X the thread id in log messages are more likely to
+ be unique now.
+ - When complaining about missing filters, the filter type is logged
+ as well.
+ - A couple of harmless coverity warnings were silenced
+ (CID #161202, CID #161203, CID #161211).
+
+- Action file improvements:
+ - Filtering is disabled for Range requests to let download resumption
+ and Windows updates work with the default configuration.
+ - Unblock ".ardmediathek.de/".
+ Reported by ThTomate in #932.
+
+- Documentation improvements:
+ - Add FAQ entry for crashes caused by memory limits.
+ - Remove obsolete FAQ entry about a bug in PHP 4.2.3.
+ - Mention the new mailing lists were appropriate.
+ As the archives have not been migrated, continue to
+ mention the archives at SF in the contacting section
+ for now.
+ - Note that the templates should be adjusted if Privoxy is
+ running as intercepting proxy without getting all requests.
+ - A bunch of links were converted to https://.
+ - Rephrase onion service paragraph to make it more obvious
+ that Tor is involved and that the whole website (and not
+ just the homepage) is available as onion service.
+ - Streamline the "More information" section on the homepage further
+ by additionally ditching the link to the 'See also' section
+ of the user manual. The section contains mostly links that are
+ directly reachable from the homepage already and the rest is
+ not significant enough to get a link from the homepage.
+ - Change the add-header{} example to set the DNT header
+ and use a complete section to make copy and pasting
+ more convenient.
+ Add a comment to make it obvious that adding the
+ header is not recommended for obvious reasons.
+ Using the DNT header as example was suggested by
+ Leo Wzukw.
+ - Streamline the support-and-service template
+ Instead of linking to the various support trackers
+ (whose URLs hopefully change soon), link to the
+ contact section of the user manual to increase the
+ chances that users actually read it.
+ - Add a FAQ entry for tainted sockets.
+ - More sections in the documentation have stable URLs now.
+ - FAQ: Explain why 'ping config.privoxy.org' is not expected
+ to reach a local Privoxy installation.
+ - Note that donations done through Zwiebelfreunde e.V. currently
+ can't be checked automatically.
+ - Updated section regarding starting Privoxy under OS X.
+ - Use dedicated start instructions for FreeBSD and ElectroBSD.
+ - Removed release instructions for AIX. They haven't been working
+ for years and unsurprisingly nobody seems to care.
+ - Removed obsolete reference to the solaris-dist target.
+ - Updated the release instructions for FreeBSD.
+ - Removed unfinished release instructions for Amiga OS and HP-UX 11.
+ - Added a pointer to the Cygwin Time Machine for getting the last release of
+ Cygwin version 1.5 to use for building Privoxy on Windows.
+ - Various typos have been fixed.
+
+- Infrastructure improvements:
+ - The website is no longer hosted at SourceForge and
+ can be reached through https now.
+ - The mailing lists at SourceForge have been deprecated,
+ you can subscribe to the new ones at: https://lists.privoxy.org/
+ - Migrating the remaining services from SourceForge is
+ work in progress (TODO list item #53).
+
+- Build system improvements:
+ - Add configure argument to optimistically redefine FD_SETSIZE
+ with the intent to change the maximum number of client
+ connections Privoxy can handle. Only works with some libcs.
+ Sponsored by Robert Klemme.
+ - Let the tarball-dist target skip files in ".git".
+ - Let the tarball-dist target work in cwds other than current.
+ - Make the 'clean' target faster when run from a git repository.
+ - Include tools in the generic distribution.
+ - Let the gen-dist target work in cwds other than current.
+ - Sort find output that is used for distribution tarballs
+ to get reproducible results.
+ - Don't add '-src' to the name of the tar ball generated by the
+ gen-dist target. The package isn't a source distribution but a
+ binary package.
+ While at it, use a variable for the name to reduce the chances
+ that the various references get out of sync and fix the gen-upload
+ target which was looking in the wrong directory.
+ - Add regression-tests.action to the files that are distributed.
+ - The gen-dist target which was broken since 2002 (r1.92) has been fixed.
+ - Remove genclspec.sh which has been obsolete since 2009.
+ - Remove obsolete reference to Redhat spec file.
+ - Remove the obsolete announce target which has been commented out years ago.
+ - Let rsync skip files if the checksums match.
+
+- Privoxy-Regression-Test:
+ - Add a "Default level offset" directive which can be used to
+ change the default level by a given value.
+ This directive affects all tests located after it until the end
+ of the file or a another "Default level offset" directive is reached.
+ The purpose of this directive is to make it more convenient to skip
+ similar tests in a given file without having to remove or disable
+ the tests completely.
+ - Let test level 17 depend on FEATURE_64_BIT_TIME_T
+ instead of FEATURE_PTHREAD which has no direct connection
+ to the time_t size.
+ - Fix indentation in perldoc examples.
+ - Don't overlook directives in the first line of the action file.
+ - Bump version to 0.7.
+ - Fix detection of the Privoxy version now that https://
+ is used for the website.
+
+*** Version 3.0.24 stable ***
+
+- Security fixes (denial of service):
+ - Prevent invalid reads in case of corrupt chunk-encoded content.
+ CVE-2016-1982. Bug discovered with afl-fuzz and AddressSanitizer.
+ - Remove empty Host headers in client requests.
+ Previously they would result in invalid reads. CVE-2016-1983.
+ Bug discovered with afl-fuzz and AddressSanitizer.
+
+- Bug fixes:
+ - When using socks5t, send the request body optimistically as well.
+ Previously the request body wasn't guaranteed to be sent at all
+ and the error message incorrectly blamed the server.
+ Fixes #1686 reported by Peter Müller and G4JC.
+ - Fixed buffer scaling in execute_external_filter() that could lead
+ to crashes. Submitted by Yang Xia in #892.
+ - Fixed crashes when executing external filters on platforms like
+ Mac OS X. Reported by Jonathan McKenzie on ijbswa-users@.
+ - Properly parse ACL directives with ports when compiled with HAVE_RFC2553.
+ Previously the port wasn't removed from the host and in case of
+ 'permit-access 127.0.0.1 example.org:80' Privoxy would try (and fail)
+ to resolve "example.org:80" instead of example.org.
+ Reported by Pak Chan on ijbswa-users@.
+ - Check requests more carefully before serving them forcefully
+ when blocks aren't enforced. Privoxy always adds the force token
+ at the beginning of the path, but would previously accept it anywhere
+ in the request line. This could result in requests being served that
+ should be blocked. For example in case of pages that were loaded with
+ force and contained JavaScript to create additionally requests that
+ embed the origin URL (thus inheriting the force prefix).
+ The bug is not considered a security issue and the fix does not make
+ it harder for remote sites to intentionally circumvent blocks if
+ Privoxy isn't configured to enforce them.
+ Fixes #1695 reported by Korda.
+ - Normalize the request line in intercepted requests to make rewriting
+ the destination more convenient. Previously rewrites for intercepted
+ requests were expected to fail unless $hostport was being used, but
+ they failed "the wrong way" and would result in an out-of-memory
+ message (vanilla host patterns) or a crash (extended host patterns).
+ Reported by "Guybrush Threepwood" in #1694.
+ - Enable socket lingering for the correct socket.
+ Previously it was repeatedly enabled for the listen socket
+ instead of for the accepted socket. The bug was found by
+ code inspection and did not cause any (reported) issues.
+ - Detect and reject parameters for parameter-less actions.
+ Previously they were silently ignored.
+ - Fixed invalid reads in internal and outdated pcre code.
+ Found with afl-fuzz and AddressSanitizer.
+ - Prevent invalid read when loading invalid action files.
+ Found with afl-fuzz and AddressSanitizer.
+ - Windows build: Use the correct function to close the event handle.
+ It's unclear if this bug had a negative impact on Privoxy's behaviour.
+ Reported by Jarry Xu in #891.
+ - In case of invalid forward-socks5(t) directives, use the
+ correct directive name in the error messages. Previously they
+ referred to forward-socks4t failures.
+ Reported by Joel Verhagen in #889.
+
+- General improvements:
+ - Set NO_DELAY flag for the accepting socket. This significantly reduces
+ the latency if the operating system is not configured to set the flag
+ by default. Reported by Johan Sintorn in #894.
+ - Allow to build with mingw x86_64. Submitted by Rustam Abdullaev in #135.
+ - Introduce the new forwarding type 'forward-webserver'.
+ Currently it is only supported by the forward-override{} action and
+ there's no config directive with the same name. The forwarding type
+ is similar to 'forward', but the request line only contains the path
+ instead of the complete URL.
+ - The CGI editor no longer treats 'standard.action' special.
+ Nowadays the official "standards" are part of default.action
+ and there's no obvious reason to disallow editing them through
+ the cgi editor anyway (if the user decided that the lack of
+ authentication isn't an issue in her environment).
+ - Improved error messages when rejecting intercepted requests
+ with unknown destination.
+ - A couple of log messages now include the number of active threads.
+ - Removed non-standard Proxy-Agent headers in HTTP snipplets
+ to make testing more convenient.
+ - Include the error code for pcre errors Privoxy does not recognize.
+ - Config directives with numerical arguments are checked more carefully.
+ - Privoxy's malloc() wrapper has been changed to prevent zero-size
+ allocations which should only occur as the result of bugs.
+ - Various cosmetic changes.
+
+- Action file improvements:
+ - Unblock ".deutschlandradiokultur.de/".
+ Reported by u302320 in #924.
+ - Add two fast-redirect exceptions for "yandex.ru".
+ - Disable filter{banners-by-size} for ".plasmaservice.de/".
+ - Unblock "klikki.fi/adv/".
+ - Block requests for "resources.infolinks.com/".
+ Reported by "Black Rider" on ijbswa-users@.
+ - Block a bunch of criteo domains.
+ Reported by Black Rider.
+ - Block "abs.proxistore.com/abe/".
+ Reported by Black Rider.
+ - Disable filter{banners-by-size} for ".black-mosquito.org/".
+ - Disable fast-redirects for "disqus.com/".
+
+- Documentation improvements:
+ - FAQ: Explicitly point fingers at ASUS as an example of a
+ company that has been reported to force malware based on
+ Privoxy upon its customers.
+ - Correctly document the action type for a bunch of "multi-value"
+ actions that were incorrectly documented to be "parameterized".
+ Reported by Gregory Seidman on ijbswa-users@.
+ - Fixed the documented type of the forward-override{} action
+ which is obviously 'parameterized'.
+
+- Website improvements:
+ - Users who don't trust binaries served by SourceForge
+ can get them from a mirror. Migrating away from SourceForge
+ is planned for 2016 (TODO list item #53).
+ - The website is now available as onion service
+ (http://jvauzb4sb3bwlsnc.onion/).
+
+*** Version 3.0.23 stable ***
+
+- Bug fixes:
+ - Fixed a DoS issue in case of client requests with incorrect
+ chunk-encoded body. When compiled with assertions enabled
+ (the default) they could previously cause Privoxy to abort().
+ Reported by Matthew Daley. CVE-2015-1380.
+ - Fixed multiple segmentation faults and memory leaks in the
+ pcrs code. This fix also increases the chances that an invalid
+ pcrs command is rejected as such. Previously some invalid commands
+ would be loaded without error. Note that Privoxy's pcrs sources
+ (action and filter files) are considered trustworthy input and
+ should not be writable by untrusted third-parties. CVE-2015-1381.
+ - Fixed an 'invalid read' bug which could at least theoretically
+ cause Privoxy to crash. So far, no crashes have been observed.
+ CVE-2015-1382.
+ - Compiles with --disable-force again. Reported by Kai Raven.
+ - Client requests with body that can't be delivered no longer
+ cause pipelined requests behind them to be rejected as invalid.
+ Reported by Basil Hussain.
+
+- General improvements:
+ - If a pcrs command is rejected as invalid, Privoxy now logs
+ the cause of the problem as text. Previously the pcrs error
+ code was logged.
+ - The tests are less likely to cause false positives.
+
+- Action file improvements:
+ - '.sify.com/' is no longer blocked. Apparently it is not actually
+ a pure tracking site (anymore?). Reported by Andrew on ijbswa-users@.
+ - Unblock banners on .amnesty.de/ which aren't ads.
+
+- Documentation improvements:
+ - The 'Would you like to donate?' section now also contains
+ a "Paypal" address.
+ - The list of supported operating systems has been updated.
+ - The existence of the SF support and feature trackers has been
+ deemphasized because they have been broken for months.
+ Most of the time the mailing lists still work.
+ - The claim that default.action updates are sometimes released
+ on their own has been removed. It hasn't happened in years.
+ - Explicitly mention that Tor's port may deviate from the default
+ when using a bundle. Requested by Andrew on ijbswa-users@.
+
projects / privoxy.git / blobdiff