The Main Configuration File By default, the main configuration file is named config, with the exception of Windows, where it is named config.txt. Configuration lines consist of an initial keyword followed by a list of values, all separated by whitespace (any number of spaces or tabs). For example: confdir /etc/privoxy Assigns the value /etc/privoxy to the option confdir and thus indicates that the configuration directory is named /etc/privoxy/. All options in the config file except for confdir and logdir are optional. Watch out in the below description for what happens if you leave them unset. The main config file controls all aspects of Privoxy's operation that are not location dependent (i.e. they apply universally, no matter where you may be surfing). Like the filter and action files, the config file is a plain text file and can be modified with a text editor like emacs, vim or notepad.exe. ]]> @@TITLE<!-- between the @@ is stripped by Makefile -->@@ Sample Configuration File for Privoxy &p-version; Copyright (C) 2001-2019 Privoxy Developers https://www.privoxy.org/ ################################################################## # Table of Contents # # I. INTRODUCTION # II. FORMAT OF THE CONFIGURATION FILE # # 1. LOCAL SET-UP DOCUMENTATION # 2. CONFIGURATION AND LOG FILE LOCATIONS # 3. DEBUGGING # 4. ACCESS CONTROL AND SECURITY # 5. FORWARDING # 6. MISCELLANEOUS # 7. TLS # 8. WINDOWS GUI OPTIONS # # ################################################################## I. INTRODUCTION =============== This file holds Privoxy's main configuration. Privoxy detects configuration changes automatically, so you don't have to restart it unless you want to load a different configuration file. The configuration will be reloaded with the first request after the change was done, this request itself will still use the old configuration, though. In other words: it takes two requests before you see the result of your changes. Requests that are dropped due to ACL don't trigger reloads. When starting Privoxy on Unix systems, give the location of this file as last argument. On Windows systems, Privoxy will look for this file with the name 'config.txt' in the current working directory of the Privoxy process. II. FORMAT OF THE CONFIGURATION FILE ==================================== Configuration lines consist of an initial keyword followed by a list of values, all separated by whitespace (any number of spaces or tabs). For example, actionsfile default.action Indicates that the actionsfile is named 'default.action'. The '#' indicates a comment. Any part of a line following a '#' is ignored, except if the '#' is preceded by a '\'. Thus, by placing a # at the start of an existing configuration line, you can make it a comment and it will be treated as if it weren't there. This is called "commenting out" an option and can be useful. Removing the # again is called "uncommenting". Note that commenting out an option and leaving it at its default are two completely different things! Most options behave very differently when unset. See the "Effect if unset" explanation in each option's description for details. Long lines can be continued on the next line by using a `\' as the last character. ]]> Local Set-up Documentation If you intend to operate Privoxy for more users than just yourself, it might be a good idea to let them know how to reach you, what you block and why you do that, your policies, etc. user-manual Specifies: Location of the Privoxy User Manual. Type of value: A fully qualified URI Default value: Unset Effect if unset: https://www.privoxy.org/version/user-manual/ will be used, where version is the Privoxy version. Notes: The User Manual URI is the single best source of information on Privoxy, and is used for help links from some of the internal CGI pages. The manual itself is normally packaged with the binary distributions, so you probably want to set this to a locally installed copy. Examples: The best all purpose solution is simply to put the full local PATH to where the User Manual is located: user-manual /usr/share/doc/privoxy/user-manual The User Manual is then available to anyone with access to Privoxy, by following the built-in URL: http://config.privoxy.org/user-manual/ (or the shortcut: http://p.p/user-manual/). If the documentation is not on the local system, it can be accessed from a remote server, as: user-manual http://example.com/privoxy/user-manual/ If set, this option should be the first option in the config file, because it is used while the config file is being read on start-up. ]]> WARNING!!!
If set, this option should be the first option in the config file, because it is used while the config file is being read.
]]>
@@#user-manual https://www.privoxy.org/user-manual/]]>
trust-info-url Specifies: A URL to be displayed in the error page that users will see if access to an untrusted page is denied. Type of value: URL Default value: Unset Effect if unset: No links are displayed on the "untrusted" error page. Notes: The value of this option only matters if the experimental trust mechanism has been activated. (See trustfile below.) If you use the trust mechanism, it is a good idea to write up some on-line documentation about your trust policy and to specify the URL(s) here. Use multiple times for multiple URLs. The URL(s) should be added to the trustfile as well, so users don't end up locked out from the information on why they were locked out in the first place! @@#trust-info-url http://www.example.com/why_we_block.html]]> @@#trust-info-url http://www.example.com/what_we_allow.html]]> admin-address Specifies: An email address to reach the Privoxy administrator. Type of value: Email address Default value: Unset Effect if unset: No email address is displayed on error pages and the CGI user interface. Notes: If both admin-address and proxy-info-url are unset, the whole "Local Privoxy Support" box on all generated pages will not be shown. @@#admin-address privoxy-admin@example.com]]> proxy-info-url Specifies: A URL to documentation about the local Privoxy setup, configuration or policies. Type of value: URL Default value: Unset Effect if unset: No link to local documentation is displayed on error pages and the CGI user interface. Notes: If both admin-address and proxy-info-url are unset, the whole "Local Privoxy Support" box on all generated pages will not be shown. This URL shouldn't be blocked ;-) @@#proxy-info-url http://www.example.com/proxy-service.html]]>
Configuration and Log File Locations Privoxy can (and normally does) use a number of other files for additional configuration, help and logging. This section of the configuration file tells Privoxy where to find those other files. The user running Privoxy, must have read permission for all configuration files, and write permission to any files that would be modified, such as log files and actions files. confdir Specifies: The directory where the other configuration files are located. Type of value: Path name Default value: /etc/privoxy (Unix) or Privoxy installation dir (Windows) Effect if unset: Mandatory Notes: No trailing /, please. @@confdir .]]> templdir Specifies: An alternative directory where the templates are loaded from. Type of value: Path name Default value: unset Effect if unset: The templates are assumed to be located in confdir/template. Notes: Privoxy's original templates are usually overwritten with each update. Use this option to relocate customized templates that should be kept. As template variables might change between updates, you shouldn't expect templates to work with Privoxy releases other than the one they were part of, though. @@#templdir .]]> temporary-directory Specifies: A directory where Privoxy can create temporary files. Type of value: Path name Default value: unset Effect if unset: No temporary files are created, external filters don't work. Notes: To execute external filters, Privoxy has to create temporary files. This directive specifies the directory the temporary files should be written to. It should be a directory only Privoxy (and trusted users) can access. @@#temporary-directory .]]> logdir Specifies: The directory where all logging takes place (i.e. where the logfile is located). Type of value: Path name Default value: /var/log/privoxy (Unix) or Privoxy installation dir (Windows) Effect if unset: Mandatory Notes: No trailing /, please. @@logdir .]]> actionsfile Specifies: The actions file(s) to use Type of value: Complete file name, relative to confdir Default values: match-all.action # Actions that are applied to all sites and maybe overruled later on. default.action # Main actions file user.action # User customizations Effect if unset: No actions are taken at all. More or less neutral proxying. Notes: Multiple actionsfile lines are permitted, and are in fact recommended! The default values are default.action, which is the main actions file maintained by the developers, and user.action, where you can make your personal additions. Actions files contain all the per site and per URL configuration for ad blocking, cookie management, privacy considerations, etc. @@actionsfile match-all.action # Actions that are applied to all sites and maybe overruled later on.]]> @@actionsfile default.action # Main actions file]]> @@actionsfile user.action # User customizations]]> filterfile Specifies: The filter file(s) to use Type of value: File name, relative to confdir Default value: default.filter (Unix) or default.filter.txt (Windows) Effect if unset: No textual content filtering takes place, i.e. all +filter{name} actions in the actions files are turned neutral. Notes: Multiple filterfile lines are permitted. The filter files contain content modification rules that use regular expressions. These rules permit powerful changes on the content of Web pages, and optionally the headers as well, e.g., you could try to disable your favorite JavaScript annoyances, re-write the actual displayed text, or just have some fun playing buzzword bingo with web pages. The +filter{name} actions rely on the relevant filter (name) to be defined in a filter file! A pre-defined filter file called default.filter that contains a number of useful filters for common problems is included in the distribution. See the section on the filter action for a list. It is recommended to place any locally adapted filters into a separate file, such as user.filter. @@filterfile default.filter]]> @@filterfile user.filter # User customizations]]> logfile Specifies: The log file to use Type of value: File name, relative to logdir Default value: Unset (commented out). When activated: logfile (Unix) or privoxy.log (Windows). Effect if unset: No logfile is written. Notes: The logfile is where all logging and error messages are written. The level of detail and number of messages are set with the debug option (see below). The logfile can be useful for tracking down a problem with Privoxy (e.g., it's not blocking an ad you think it should block) and it can help you to monitor what your browser is doing. Depending on the debug options below, the logfile may be a privacy risk if third parties can get access to it. As most users will never look at it, Privoxy only logs fatal errors by default. For most troubleshooting purposes, you will have to change that, please refer to the debugging section for details. Any log files must be writable by whatever user Privoxy is being run as (on Unix, default user id is privoxy). To prevent the logfile from growing indefinitely, it is recommended to periodically rotate or shorten it. Many operating systems support log rotation out of the box, some require additional software to do it. For details, please refer to the documentation for your operating system. @@logfile logfile]]> trustfile Specifies: The name of the trust file to use Type of value: File name, relative to confdir Default value: Unset (commented out). When activated: trust (Unix) or trust.txt (Windows) Effect if unset: The entire trust mechanism is disabled. Notes: The trust mechanism is an experimental feature for building white-lists and should be used with care. It is NOT recommended for the casual user. If you specify a trust file, Privoxy will only allow access to sites that are specified in the trustfile. Sites can be listed in one of two ways: Prepending a ~ character limits access to this site only (and any sub-paths within this site), e.g. ~www.example.com allows access to ~www.example.com/features/news.html, etc. Or, you can designate sites as trusted referrers, by prepending the name with a + character. The effect is that access to untrusted sites will be granted -- but only if a link from this trusted referrer was used to get there. The link target will then be added to the trustfile so that future, direct accesses will be granted. Sites added via this mechanism do not become trusted referrers themselves (i.e. they are added with a ~ designation). There is a limit of 512 such entries, after which new entries will not be made. If you use the + operator in the trust file, it may grow considerably over time. It is recommended that Privoxy be compiled with the --disable-force, --disable-toggle and --disable-editor options, if this feature is to be used. Possible applications include limiting Internet access for children. @@#trustfile trust]]> Debugging These options are mainly useful when tracing a problem. Note that you might also want to invoke Privoxy with the --no-daemon command line option when debugging. debug Specifies: Key values that determine what information gets logged. Type of value: Integer values Default value: 0 (i.e.: only fatal errors (that cause Privoxy to exit) are logged) Effect if unset: Default value is used (see above). Notes: The available debug levels are: debug 1 # Log the destination for each request &my-app; let through. See also debug 1024. debug 2 # show each connection status debug 4 # show I/O status debug 8 # show header parsing debug 16 # log all data written to the network debug 32 # debug force feature debug 64 # debug regular expression filters debug 128 # debug redirects debug 256 # debug GIF de-animation debug 512 # Common Log Format debug 1024 # Log the destination for requests &my-app; didn't let through, and the reason why. debug 2048 # CGI user interface debug 4096 # Startup banner and warnings. debug 8192 # Non-fatal errors debug 32768 # log all data read from the network debug 65536 # Log the applying actions To select multiple debug levels, you can either add them or use multiple debug lines. A debug level of 1 is informative because it will show you each request as it happens. 1, 1024, 4096 and 8192 are recommended so that you will notice when things go wrong. The other levels are probably only of interest if you are hunting down a specific problem. They can produce a hell of an output (especially 16). If you are used to the more verbose settings, simply enable the debug lines below again. If you want to use pure CLF (Common Log Format), you should set debug 512 ONLY and not enable anything else. Privoxy has a hard-coded limit for the length of log messages. If it's reached, messages are logged truncated and marked with ... [too long, truncated]. Please don't file any support requests without trying to reproduce the problem with increased debug level first. Once you read the log messages, you may even be able to solve the problem on your own. @@#debug 1 # Log the destination for each request &my-app; let through.]]> @@#debug 1024 # Log the destination for requests &my-app; didn't let through, and the reason why.]]> @@#debug 4096 # Startup banner and warnings]]> @@#debug 8192 # Non-fatal errors]]> single-threaded Specifies: Whether to run only one server thread. Type of value: 1 or 0 Default value: 0 Effect if unset: Multi-threaded (or, where unavailable: forked) operation, i.e. the ability to serve multiple requests simultaneously. Notes: This option is only there for debugging purposes. It will drastically reduce performance. @@#single-threaded 1]]> hostname Specifies: The hostname shown on the CGI pages. Type of value: Text Default value: Unset Effect if unset: The hostname provided by the operating system is used. Notes: On some misconfigured systems resolving the hostname fails or takes too much time and slows Privoxy down. Setting a fixed hostname works around the problem. In other circumstances it might be desirable to show a hostname other than the one returned by the operating system. For example if the system has several different hostnames and you don't want to use the first one. Note that Privoxy does not validate the specified hostname value. @@#hostname hostname.example.org]]> Access Control and Security This section of the config file controls the security-relevant aspects of Privoxy's configuration. listen-address Specifies: The address and TCP port on which Privoxy will listen for client requests. Type of value: [IP-Address]:Port [Hostname]:Port Default value: 127.0.0.1:8118 Effect if unset: Bind to 127.0.0.1 (IPv4 localhost), port 8118. This is suitable and recommended for home users who run Privoxy on the same machine as their browser. Notes: You will need to configure your browser(s) to this proxy address and port. If you already have another service running on port 8118, or if you want to serve requests from other machines (e.g. on your local network) as well, you will need to override the default. You can use this statement multiple times to make Privoxy listen on more ports or more IP addresses. Suitable if your operating system does not support sharing IPv6 and IPv4 protocols on the same socket. If a hostname is used instead of an IP address, Privoxy will try to resolve it to an IP address and if there are multiple, use the first one returned. If the address for the hostname isn't already known on the system (for example because it's in /etc/hostname), this may result in DNS traffic. If the specified address isn't available on the system, or if the hostname can't be resolved, Privoxy will fail to start. IPv6 addresses containing colons have to be quoted by brackets. They can only be used if Privoxy has been compiled with IPv6 support. If you aren't sure if your version supports it, have a look at http://config.privoxy.org/show-status. Some operating systems will prefer IPv6 to IPv4 addresses even if the system has no IPv6 connectivity which is usually not expected by the user. Some even rely on DNS to resolve localhost which mean the "localhost" address used may not actually be local. It is therefore recommended to explicitly configure the intended IP address instead of relying on the operating system, unless there's a strong reason not to. If you leave out the address, Privoxy will bind to all IPv4 interfaces (addresses) on your machine and may become reachable from the Internet and/or the local network. Be aware that some GNU/Linux distributions modify that behaviour without updating the documentation. Check for non-standard patches if your Privoxy version behaves differently. If you configure Privoxy to be reachable from the network, consider using access control lists (ACL's, see below), and/or a firewall. If you open Privoxy to untrusted users, you will also want to make sure that the following actions are disabled: enable-edit-actions and enable-remote-toggle Example: Suppose you are running Privoxy on a machine which has the address 192.168.0.1 on your local private network (192.168.0.0) and has another outside connection with a different address. You want it to serve requests from inside only: listen-address 192.168.0.1:8118 Suppose you are running Privoxy on an IPv6-capable machine and you want it to listen on the IPv6 address of the loopback device: listen-address [::1]:8118 @@listen-address 127.0.0.1:8118]]> toggle Specifies: Initial state of "toggle" status Type of value: 1 or 0 Default value: 1 Effect if unset: Act as if toggled on Notes: If set to 0, Privoxy will start in toggled off mode, i.e. mostly behave like a normal, content-neutral proxy with both ad blocking and content filtering disabled. See enable-remote-toggle below. @@toggle 1]]> enable-remote-toggle Specifies: Whether or not the web-based toggle feature may be used Type of value: 0 or 1 Default value: 0 Effect if unset: The web-based toggle feature is disabled. Notes: When toggled off, Privoxy mostly acts like a normal, content-neutral proxy, i.e. doesn't block ads or filter content. Access to the toggle feature can not be controlled separately by ACLs or HTTP authentication, so that everybody who can access Privoxy (see ACLs and listen-address above) can toggle it for all users. So this option is not recommended for multi-user environments with untrusted users. Note that malicious client side code (e.g Java) is also capable of using this option. As a lot of Privoxy users don't read documentation, this feature is disabled by default. Note that you must have compiled Privoxy with support for this feature, otherwise this option has no effect. @@enable-remote-toggle 0]]> enable-remote-http-toggle Specifies: Whether or not Privoxy recognizes special HTTP headers to change its behaviour. Type of value: 0 or 1 Default value: 0 Effect if unset: Privoxy ignores special HTTP headers. Notes: When toggled on, the client can change Privoxy's behaviour by setting special HTTP headers. Currently the only supported special header is X-Filter: No, to disable filtering for the ongoing request, even if it is enabled in one of the action files. This feature is disabled by default. If you are using Privoxy in a environment with trusted clients, you may enable this feature at your discretion. Note that malicious client side code (e.g Java) is also capable of using this feature. This option will be removed in future releases as it has been obsoleted by the more general header taggers. @@enable-remote-http-toggle 0]]> enable-edit-actions Specifies: Whether or not the web-based actions file editor may be used Type of value: 0 or 1 Default value: 0 Effect if unset: The web-based actions file editor is disabled. Notes: Access to the editor can not be controlled separately by ACLs or HTTP authentication, so that everybody who can access Privoxy (see ACLs and listen-address above) can modify its configuration for all users. This option is not recommended for environments with untrusted users and as a lot of Privoxy users don't read documentation, this feature is disabled by default. Note that malicious client side code (e.g Java) is also capable of using the actions editor and you shouldn't enable this options unless you understand the consequences and are sure your browser is configured correctly. Note that you must have compiled Privoxy with support for this feature, otherwise this option has no effect. @@enable-edit-actions 0]]> enforce-blocks Specifies: Whether the user is allowed to ignore blocks and can go there anyway. Type of value: 0 or 1 Default value: 0 Effect if unset: Blocks are not enforced. Notes: Privoxy is mainly used to block and filter requests as a service to the user, for example to block ads and other junk that clogs the pipes. Privoxy's configuration isn't perfect and sometimes innocent pages are blocked. In this situation it makes sense to allow the user to enforce the request and have Privoxy ignore the block. In the default configuration Privoxy's Blocked page contains a go there anyway link to adds a special string (the force prefix) to the request URL. If that link is used, Privoxy will detect the force prefix, remove it again and let the request pass. Of course Privoxy can also be used to enforce a network policy. In that case the user obviously should not be able to bypass any blocks, and that's what the enforce-blocks option is for. If it's enabled, Privoxy hides the go there anyway link. If the user adds the force prefix by hand, it will not be accepted and the circumvention attempt is logged. Examples: enforce-blocks 1 @@enforce-blocks 0]]> ACLs: permit-access and deny-access Specifies: Who can access what. Type of value: src_addr[:port][/src_masklen] [dst_addr[:port][/dst_masklen]] Where src_addr and dst_addr are IPv4 addresses in dotted decimal notation or valid DNS names, port is a port number, and src_masklen and dst_masklen are subnet masks in CIDR notation, i.e. integer values from 2 to 30 representing the length (in bits) of the network address. The masks and the whole destination part are optional. If your system implements RFC 3493, then src_addr and dst_addr can be IPv6 addresses delimeted by brackets, port can be a number or a service name, and src_masklen and dst_masklen can be a number from 0 to 128. Default value: Unset If no port is specified, any port will match. If no src_masklen or src_masklen is given, the complete IP address has to match (i.e. 32 bits for IPv4 and 128 bits for IPv6). Effect if unset: Don't restrict access further than implied by listen-address Notes: Access controls are included at the request of ISPs and systems administrators, and are not usually needed by individual users. For a typical home user, it will normally suffice to ensure that Privoxy only listens on the localhost (127.0.0.1) or internal (home) network address by means of the listen-address option. Please see the warnings in the FAQ that Privoxy is not intended to be a substitute for a firewall or to encourage anyone to defer addressing basic security weaknesses. Multiple ACL lines are OK. If any ACLs are specified, Privoxy only talks to IP addresses that match at least one permit-access line and don't match any subsequent deny-access line. In other words, the last match wins, with the default being deny-access. If Privoxy is using a forwarder (see forward below) for a particular destination URL, the dst_addr that is examined is the address of the forwarder and NOT the address of the ultimate target. This is necessary because it may be impossible for the local Privoxy to determine the IP address of the ultimate target (that's often what gateways are used for). You should prefer using IP addresses over DNS names, because the address lookups take time. All DNS names must resolve! You can not use domain patterns like *.org or partial domain names. If a DNS name resolves to multiple IP addresses, only the first one is used. Some systems allow IPv4 clients to connect to IPv6 server sockets. Then the client's IPv4 address will be translated by the system into IPv6 address space with special prefix ::ffff:0:0/96 (so called IPv4 mapped IPv6 address). Privoxy can handle it and maps such ACL addresses automatically. Denying access to particular sites by ACL may have undesired side effects if the site in question is hosted on a machine which also hosts other sites (most sites are). Examples: Explicitly define the default behavior if no ACL and listen-address are set: localhost is OK. The absence of a dst_addr implies that all destination addresses are OK: permit-access localhost Allow any host on the same class C subnet as www.privoxy.org access to nothing but www.example.com (or other domains hosted on the same system): permit-access www.privoxy.org/24 www.example.com/32 Allow access from any host on the 26-bit subnet 192.168.45.64 to anywhere, with the exception that 192.168.45.73 may not access the IP address behind www.dirty-stuff.example.com: permit-access 192.168.45.64/26 deny-access 192.168.45.73 www.dirty-stuff.example.com Allow access from the IPv4 network 192.0.2.0/24 even if listening on an IPv6 wild card address (not supported on all platforms): permit-access 192.0.2.0/24 This is equivalent to the following line even if listening on an IPv4 address (not supported on all platforms): permit-access [::ffff:192.0.2.0]/120 buffer-limit Specifies: Maximum size of the buffer for content filtering. Type of value: Size in Kbytes Default value: 4096 Effect if unset: Use a 4MB (4096 KB) limit. Notes: For content filtering, i.e. the +filter and +deanimate-gif actions, it is necessary that Privoxy buffers the entire document body. This can be potentially dangerous, since a server could just keep sending data indefinitely and wait for your RAM to exhaust -- with nasty consequences. Hence this option. When a document buffer size reaches the buffer-limit, it is flushed to the client unfiltered and no further attempt to filter the rest of the document is made. Remember that there may be multiple threads running, which might require up to buffer-limit Kbytes each, unless you have enabled single-threaded above. @@buffer-limit 4096]]> enable-proxy-authentication-forwarding Specifies: Whether or not proxy authentication through &my-app; should work. Type of value: 0 or 1 Default value: 0 Effect if unset: Proxy authentication headers are removed. Notes: Privoxy itself does not support proxy authentication, but can allow clients to authenticate against Privoxy's parent proxy. By default Privoxy (3.0.21 and later) don't do that and remove Proxy-Authorization headers in requests and Proxy-Authenticate headers in responses to make it harder for malicious sites to trick inexperienced users into providing login information. If this option is enabled the headers are forwarded. Enabling this option is not recommended if there is no parent proxy that requires authentication or if the local network between Privoxy and the parent proxy isn't trustworthy. If proxy authentication is only required for some requests, it is recommended to use a client header filter to remove the authentication headers for requests where they aren't needed. @@enable-proxy-authentication-forwarding 0]]> trusted-cgi-referer Specifies: A trusted website or webpage whose links can be followed to reach sensitive CGI pages Type of value: URL or URL prefix Default value: Unset Effect if unset: No external pages are considered trusted referers. Notes: Before &my-app; accepts configuration changes through CGI pages like client-tags or the remote toggle, it checks the Referer header to see if the request comes from a trusted source. By default only the webinterface domains config.privoxy.org and p.p are considered trustworthy. Requests originating from other domains are rejected to prevent third-parties from modifiying Privoxy's state by e.g. embedding images that result in CGI requests. In some environments it may be desirable to embed links to CGI pages on external pages, for example on an Intranet homepage the Privoxy admin controls. The trusted-cgi-referer option can be used to add that page, or the whole domain, as trusted source so the resulting requests aren't rejected. Requests are accepted if the specified trusted-cgi-refer is the prefix of the Referer. If the trusted source is supposed to access the CGI pages via JavaScript the cors-allowed-origin option can be used. Declaring pages the admin doesn't control trustworthy may allow malicious third parties to modify Privoxy's internal state against the user's wishes and without the user's knowledge. @@#trusted-cgi-referer http://www.example.org/local-privoxy-control-page]]> cors-allowed-origin Specifies: A trusted website which can access &my-app;'s CGI pages through JavaScript. Type of value: URL Default value: Unset Effect if unset: No external sites get access via cross-origin resource sharing. Notes: Modern browsers by default prevent cross-origin requests made via JavaScript to &my-app;'s CGI interface even if &my-app; would trust the referer because it's white listed via the trusted-cgi-referer directive. Cross-origin resource sharing (CORS) is a mechanism to allow cross-origin requests. The cors-allowed-origin option can be used to specify a domain that is allowed to make requests to Privoxy CGI interface via JavaScript. It is used in combination with the trusted-cgi-referer directive. Declaring domains the admin doesn't control trustworthy may allow malicious third parties to modify Privoxy's internal state against the user's wishes and without the user's knowledge. @@#cors-allowed-origin http://www.example.org/]]> Forwarding This feature allows routing of HTTP requests through a chain of multiple proxies. Forwarding can be used to chain Privoxy with a caching proxy to speed up browsing. Using a parent proxy may also be necessary if the machine that Privoxy runs on has no direct Internet access. Note that parent proxies can severely decrease your privacy level. For example a parent proxy could add your IP address to the request headers and if it's a caching proxy it may add the Etag header to revalidation requests again, even though you configured Privoxy to remove it. It may also ignore Privoxy's header time randomization and use the original values which could be used by the server as cookie replacement to track your steps between visits. Also specified here are SOCKS proxies. Privoxy supports the SOCKS 4 and SOCKS 4A protocols. forward Specifies: To which parent HTTP proxy specific requests should be routed. Type of value: target_pattern http_parent[:port] where target_pattern is a URL pattern that specifies to which requests (i.e. URLs) this forward rule shall apply. Use / to denote all URLs. http_parent[:port] is the DNS name or IP address of the parent HTTP proxy through which the requests should be forwarded, optionally followed by its listening port (default: 8000). Use a single dot (.) to denote no forwarding. Default value: Unset Effect if unset: Don't use parent HTTP proxies. Notes: If http_parent is ., then requests are not forwarded to another HTTP proxy but are made directly to the web servers. http_parent can be a numerical IPv6 address (if RFC 3493 is implemented). To prevent clashes with the port delimiter, the whole IP address has to be put into brackets. On the other hand a target_pattern containing an IPv6 address has to be put into angle brackets (normal brackets are reserved for regular expressions already). Multiple lines are OK, they are checked in sequence, and the last match wins. Examples: Everything goes to an example parent proxy, except SSL on port 443 (which it doesn't handle): forward / parent-proxy.example.org:8080 forward :443 . Everything goes to our example ISP's caching proxy, except for requests to that ISP's sites: forward / caching-proxy.isp.example.net:8000 forward .isp.example.net . Parent proxy specified by an IPv6 address: forward / [2001:DB8::1]:8000 Suppose your parent proxy doesn't support IPv6: forward / parent-proxy.example.org:8000 forward ipv6-server.example.org . forward <[2-3][0-9a-f][0-9a-f][0-9a-f]:*> . forward-socks4, forward-socks4a, forward-socks5 and forward-socks5t Specifies: Through which SOCKS proxy (and optionally to which parent HTTP proxy) specific requests should be routed. Type of value: target_pattern [user:pass@]socks_proxy[:port] http_parent[:port] where target_pattern is a URL pattern that specifies to which requests (i.e. URLs) this forward rule shall apply. Use / to denote all URLs. http_parent and socks_proxy are IP addresses in dotted decimal notation or valid DNS names (http_parent may be . to denote no HTTP forwarding), and the optional port parameters are TCP ports, i.e. integer values from 1 to 65535. user and pass can be used for SOCKS5 authentication if required. Default value: Unset Effect if unset: Don't use SOCKS proxies. Notes: Multiple lines are OK, they are checked in sequence, and the last match wins. The difference between forward-socks4 and forward-socks4a is that in the SOCKS 4A protocol, the DNS resolution of the target hostname happens on the SOCKS server, while in SOCKS 4 it happens locally. With forward-socks5 the DNS resolution will happen on the remote server as well. forward-socks5t works like vanilla forward-socks5 but lets &my-app; additionally use Tor-specific SOCKS extensions. Currently the only supported SOCKS extension is optimistic data which can reduce the latency for the first request made on a newly created connection. socks_proxy and http_parent can be a numerical IPv6 address (if RFC 3493 is implemented). To prevent clashes with the port delimiter, the whole IP address has to be put into brackets. On the other hand a target_pattern containing an IPv6 address has to be put into angle brackets (normal brackets are reserved for regular expressions already). If http_parent is ., then requests are not forwarded to another HTTP proxy but are made (HTTP-wise) directly to the web servers, albeit through a SOCKS proxy. Examples: From the company example.com, direct connections are made to all internal domains, but everything outbound goes through their ISP's proxy by way of example.com's corporate SOCKS 4A gateway to the Internet. forward-socks4a / socks-gw.example.com:1080 www-cache.isp.example.net:8080 forward .example.com . A rule that uses a SOCKS 4 gateway for all destinations but no HTTP parent looks like this: forward-socks4 / socks-gw.example.com:1080 . To connect SOCKS5 proxy which requires username/password authentication: forward-socks5 / user:pass@socks-gw.example.com:1080 . To chain Privoxy and Tor, both running on the same system, you would use something like: forward-socks5t / 127.0.0.1:9050 . Note that if you got Tor through one of the bundles, you may have to change the port from 9050 to 9150 (or even another one). For details, please check the documentation on the Tor website. The public Tor network can't be used to reach your local network, if you need to access local servers you therefore might want to make some exceptions: forward 192.168.*.*/ . forward 10.*.*.*/ . forward 127.*.*.*/ . Unencrypted connections to systems in these address ranges will be as (un)secure as the local network is, but the alternative is that you can't reach the local network through Privoxy at all. Of course this may actually be desired and there is no reason to make these exceptions if you aren't sure you need them. If you also want to be able to reach servers in your local network by using their names, you will need additional exceptions that look like this: forward localhost/ . Advanced Forwarding Examples If you have links to multiple ISPs that provide various special content only to their subscribers, you can configure multiple Privoxies which have connections to the respective ISPs to act as forwarders to each other, so that your users can see the internal content of all ISPs. Assume that host-a has a PPP connection to isp-a.example.net. And host-b has a PPP connection to isp-b.example.org. Both run Privoxy. Their forwarding configuration can look like this: host-a: forward / . forward .isp-b.example.net host-b:8118 host-b: forward / . forward .isp-a.example.org host-a:8118 Now, your users can set their browser's proxy to use either host-a or host-b and be able to browse the internal content of both isp-a and isp-b. If you intend to chain Privoxy and squid locally, then chaining as browser -> squid -> privoxy is the recommended way. Assuming that Privoxy and squid run on the same box, your squid configuration could then look like this: # Define Privoxy as parent proxy (without ICP) cache_peer 127.0.0.1 parent 8118 7 no-query # Define ACL for protocol FTP acl ftp proto FTP # Do not forward FTP requests to Privoxy always_direct allow ftp # Forward all the rest to Privoxy never_direct allow all You would then need to change your browser's proxy settings to squid's address and port. Squid normally uses port 3128. If unsure consult http_port in squid.conf. You could just as well decide to only forward requests you suspect of leading to Windows executables through a virus-scanning parent proxy, say, on antivir.example.com, port 8010: forward / . forward /.*\.(exe|com|dll|zip)$ antivir.example.com:8010 ]]> forwarded-connect-retries Specifies: How often Privoxy retries if a forwarded connection request fails. Type of value: Number of retries. Default value: 0 Effect if unset: Connections forwarded through other proxies are treated like direct connections and no retry attempts are made. Notes: forwarded-connect-retries is mainly interesting for socks4a connections, where Privoxy can't detect why the connections failed. The connection might have failed because of a DNS timeout in which case a retry makes sense, but it might also have failed because the server doesn't exist or isn't reachable. In this case the retry will just delay the appearance of Privoxy's error message. Note that in the context of this option, forwarded connections includes all connections that Privoxy forwards through other proxies. This option is not limited to the HTTP CONNECT method. Only use this option, if you are getting lots of forwarding-related error messages that go away when you try again manually. Start with a small value and check Privoxy's logfile from time to time, to see how many retries are usually needed. Examples: forwarded-connect-retries 1 @@forwarded-connect-retries 0]]> Miscellaneous accept-intercepted-requests Specifies: Whether intercepted requests should be treated as valid. Type of value: 0 or 1 Default value: 0 Effect if unset: Only proxy requests are accepted, intercepted requests are treated as invalid. Notes: If you don't trust your clients and want to force them to use Privoxy, enable this option and configure your packet filter to redirect outgoing HTTP connections into Privoxy. Note that intercepting encrypted connections (HTTPS) isn't supported. Make sure that Privoxy's own requests aren't redirected as well. Additionally take care that Privoxy can't intentionally connect to itself, otherwise you could run into redirection loops if Privoxy's listening port is reachable by the outside or an attacker has access to the pages you visit. If you are running Privoxy as intercepting proxy without being able to intercept all client requests you may want to adjust the CGI templates to make sure they don't reference content from config.privoxy.org. Examples: accept-intercepted-requests 1 @@accept-intercepted-requests 0]]> allow-cgi-request-crunching Specifies: Whether requests to Privoxy's CGI pages can be blocked or redirected. Type of value: 0 or 1 Default value: 0 Effect if unset: Privoxy ignores block and redirect actions for its CGI pages. Notes: By default Privoxy ignores block or redirect actions for its CGI pages. Intercepting these requests can be useful in multi-user setups to implement fine-grained access control, but it can also render the complete web interface useless and make debugging problems painful if done without care. Don't enable this option unless you're sure that you really need it. Examples: allow-cgi-request-crunching 1 @@allow-cgi-request-crunching 0]]> split-large-forms Specifies: Whether the CGI interface should stay compatible with broken HTTP clients. Type of value: 0 or 1 Default value: 0 Effect if unset: The CGI form generate long GET URLs. Notes: Privoxy's CGI forms can lead to rather long URLs. This isn't a problem as far as the HTTP standard is concerned, but it can confuse clients with arbitrary URL length limitations. Enabling split-large-forms causes Privoxy to divide big forms into smaller ones to keep the URL length down. It makes editing a lot less convenient and you can no longer submit all changes at once, but at least it works around this browser bug. If you don't notice any editing problems, there is no reason to enable this option, but if one of the submit buttons appears to be broken, you should give it a try. Examples: split-large-forms 1 @@split-large-forms 0]]> keep-alive-timeout Specifies: Number of seconds after which an open connection will no longer be reused. Type of value: Time in seconds. Default value: None Effect if unset: Connections are not kept alive. Notes: This option allows clients to keep the connection to &my-app; alive. If the server supports it, &my-app; will keep the connection to the server alive as well. Under certain circumstances this may result in speed-ups. By default, &my-app; will close the connection to the server if the client connection gets closed, or if the specified timeout has been reached without a new request coming in. This behaviour can be changed with the connection-sharing option. This option has no effect if Privoxy has been compiled without keep-alive support. Note that a timeout of five seconds as used in the default configuration file significantly decreases the number of connections that will be reused. The value is used because some browsers limit the number of connections they open to a single host and apply the same limit to proxies. This can result in a single website grabbing all the connections the browser allows, which means connections to other websites can't be opened until the connections currently in use time out. Several users have reported this as a Privoxy bug, so the default value has been reduced. Consider increasing it to 300 seconds or even more if you think your browser can handle it. If your browser appears to be hanging, it probably can't. Examples: keep-alive-timeout 300 @@keep-alive-timeout 5]]> tolerate-pipelining Specifies: Whether or not pipelined requests should be served. Type of value: 0 or 1. Default value: None Effect if unset: If Privoxy receives more than one request at once, it terminates the client connection after serving the first one. Notes: &my-app; currently doesn't pipeline outgoing requests, thus allowing pipelining on the client connection is not guaranteed to improve the performance. By default &my-app; tries to discourage clients from pipelining by discarding aggressively pipelined requests, which forces the client to resend them through a new connection. This option lets &my-app; tolerate pipelining. Whether or not that improves performance mainly depends on the client configuration. If you are seeing problems with pages not properly loading, disabling this option could work around the problem. Examples: tolerate-pipelining 1 @@tolerate-pipelining 1]]> default-server-timeout Specifies: Assumed server-side keep-alive timeout if not specified by the server. Type of value: Time in seconds. Default value: None Effect if unset: Connections for which the server didn't specify the keep-alive timeout are not reused. Notes: Enabling this option significantly increases the number of connections that are reused, provided the keep-alive-timeout option is also enabled. While it also increases the number of connections problems when &my-app; tries to reuse a connection that already has been closed on the server side, or is closed while &my-app; is trying to reuse it, this should only be a problem if it happens for the first request sent by the client. If it happens for requests on reused client connections, &my-app; will simply close the connection and the client is supposed to retry the request without bothering the user. Enabling this option is therefore only recommended if the connection-sharing option is disabled. It is an error to specify a value larger than the keep-alive-timeout value. This option has no effect if Privoxy has been compiled without keep-alive support. Examples: default-server-timeout 60 @@#default-server-timeout 60]]> connection-sharing Specifies: Whether or not outgoing connections that have been kept alive should be shared between different incoming connections. Type of value: 0 or 1 Default value: None Effect if unset: Connections are not shared. Notes: This option has no effect if Privoxy has been compiled without keep-alive support, or if it's disabled. Notes: Note that reusing connections doesn't necessary cause speedups. There are also a few privacy implications you should be aware of. If this option is effective, outgoing connections are shared between clients (if there are more than one) and closing the browser that initiated the outgoing connection does no longer affect the connection between &my-app; and the server unless the client's request hasn't been completed yet. If the outgoing connection is idle, it will not be closed until either Privoxy's or the server's timeout is reached. While it's open, the server knows that the system running &my-app; is still there. If there are more than one client (maybe even belonging to multiple users), they will be able to reuse each others connections. This is potentially dangerous in case of authentication schemes like NTLM where only the connection is authenticated, instead of requiring authentication for each request. If there is only a single client, and if said client can keep connections alive on its own, enabling this option has next to no effect. If the client doesn't support connection keep-alive, enabling this option may make sense as it allows &my-app; to keep outgoing connections alive even if the client itself doesn't support it. You should also be aware that enabling this option increases the likelihood of getting the "No server or forwarder data" error message, especially if you are using a slow connection to the Internet. This option should only be used by experienced users who understand the risks and can weight them against the benefits. Examples: connection-sharing 1 @@#connection-sharing 1]]> socket-timeout Specifies: Number of seconds after which a socket times out if no data is received. Type of value: Time in seconds. Default value: None Effect if unset: A default value of 300 seconds is used. Notes: The default is quite high and you probably want to reduce it. If you aren't using an occasionally slow proxy like Tor, reducing it to a few seconds should be fine. Examples: socket-timeout 300 @@socket-timeout 300]]> max-client-connections Specifies: Maximum number of client connections that will be served. Type of value: Positive number. Default value: 128 Effect if unset: Connections are served until a resource limit is reached. Notes: &my-app; creates one thread (or process) for every incoming client connection that isn't rejected based on the access control settings. If the system is powerful enough, &my-app; can theoretically deal with several hundred (or thousand) connections at the same time, but some operating systems enforce resource limits by shutting down offending processes and their default limits may be below the ones &my-app; would require under heavy load. Configuring &my-app; to enforce a connection limit below the thread or process limit used by the operating system makes sure this doesn't happen. Simply increasing the operating system's limit would work too, but if &my-app; isn't the only application running on the system, you may actually want to limit the resources used by &my-app;. If &my-app; is only used by a single trusted user, limiting the number of client connections is probably unnecessary. If there are multiple possibly untrusted users you probably still want to additionally use a packet filter to limit the maximal number of incoming connections per client. Otherwise a malicious user could intentionally create a high number of connections to prevent other users from using &my-app;. Obviously using this option only makes sense if you choose a limit below the one enforced by the operating system. One most POSIX-compliant systems &my-app; can't properly deal with more than FD_SETSIZE file descriptors at the same time and has to reject connections if the limit is reached. This will likely change in a future version, but currently this limit can't be increased without recompiling &my-app; with a different FD_SETSIZE limit. Examples: max-client-connections 256 @@#max-client-connections 256]]> listen-backlog Specifies: Connection queue length requested from the operating system. Type of value: Number. Default value: 128 Effect if unset: A connection queue length of 128 is requested from the operating system. Notes: Under high load incoming connection may queue up before Privoxy gets around to serve them. The queue length is limitted by the operating system. Once the queue is full, additional connections are dropped before Privoxy can accept and serve them. Increasing the queue length allows Privoxy to accept more incomming connections that arrive roughly at the same time. Note that Privoxy can only request a certain queue length, whether or not the requested length is actually used depends on the operating system which may use a different length instead. On many operating systems a limit of -1 can be specified to instruct the operating system to use the maximum queue length allowed. Check the listen man page to see if your platform allows this. On some platforms you can use "netstat -Lan -p tcp" to see the effective queue length. Effectively using a value above 128 usually requires changing the system configuration as well. On FreeBSD-based system the limit is controlled by the kern.ipc.soacceptqueue sysctl. Examples: listen-backlog 4096 @@#listen-backlog -1]]> enable-accept-filter Specifies: Whether or not Privoxy should use an accept filter Type of value: 0 or 1 Default value: 0 Effect if unset: No accept filter is enabled. Notes: Accept filters reduce the number of context switches by not passing sockets for new connections to Privoxy until a complete HTTP request is available. As a result, Privoxy can process the whole request right away without having to wait for additional data first. For this option to work, Privoxy has to be compiled with FEATURE_ACCEPT_FILTER and the operating system has to support it (which may require loading a kernel module). Currently accept filters are only supported on FreeBSD-based systems. Check the accf_http(9) man page to learn how to enable the support in the operating system. Examples: enable-accept-filter 1 @@#enable-accept-filter 1]]> handle-as-empty-doc-returns-ok Specifies: The status code Privoxy returns for pages blocked with +handle-as-empty-document. Type of value: 0 or 1 Default value: 0 Effect if unset: Privoxy returns a status 403(forbidden) for all blocked pages. Effect if set: Privoxy returns a status 200(OK) for pages blocked with +handle-as-empty-document and a status 403(Forbidden) for all other blocked pages. Notes: This directive was added as a work-around for Firefox bug 492459: Websites are no longer rendered if SSL requests for JavaScripts are blocked by a proxy. ( https://bugzilla.mozilla.org/show_bug.cgi?id=492459), the bug has been fixed for quite some time, but this directive is also useful to make it harder for websites to detect whether or not resources are being blocked. @@#handle-as-empty-doc-returns-ok 1]]> enable-compression Specifies: Whether or not buffered content is compressed before delivery. Type of value: 0 or 1 Default value: 0 Effect if unset: Privoxy does not compress buffered content. Effect if set: Privoxy compresses buffered content before delivering it to the client, provided the client supports it. Notes: This directive is only supported if Privoxy has been compiled with FEATURE_COMPRESSION, which should not to be confused with FEATURE_ZLIB. Compressing buffered content is mainly useful if Privoxy and the client are running on different systems. If they are running on the same system, enabling compression is likely to slow things down. If you didn't measure otherwise, you should assume that it does and keep this option disabled. Privoxy will not compress buffered content below a certain length. @@#enable-compression 1]]> compression-level Specifies: The compression level that is passed to the zlib library when compressing buffered content. Type of value: Positive number ranging from 0 to 9. Default value: 1 Notes: Compressing the data more takes usually longer than compressing it less or not compressing it at all. Which level is best depends on the connection between Privoxy and the client. If you can't be bothered to benchmark it for yourself, you should stick with the default and keep compression disabled. If compression is disabled, the compression level is irrelevant. Examples: # Best speed (compared to the other levels) compression-level 1 # Best compression compression-level 9 # No compression. Only useful for testing as the added header # slightly increases the amount of data that has to be sent. # If your benchmark shows that using this compression level # is superior to using no compression at all, the benchmark # is likely to be flawed. compression-level 0 @@#compression-level 1]]> client-header-order Specifies: The order in which client headers are sorted before forwarding them. Type of value: Client header names delimited by spaces or tabs Default value: None Notes: By default &my-app; leaves the client headers in the order they were sent by the client. Headers are modified in-place, new headers are added at the end of the already existing headers. The header order can be used to fingerprint client requests independently of other headers like the User-Agent. This directive allows to sort the headers differently to better mimic a different User-Agent. Client headers will be emitted in the order given, headers whose name isn't explicitly specified are added at the end. Note that sorting headers in an uncommon way will make fingerprinting actually easier. Encrypted headers are not affected by this directive. @@#client-header-order Host \ User-Agent \ Accept \ Accept-Language \ Accept-Encoding \ Proxy-Connection \ Referer \ Cookie \ DNT \ If-Modified-Since \ Cache-Control \ Content-Length \ Content-Type ]]> client-specific-tag Specifies: The name of a tag that will always be set for clients that requested it through the webinterface. Type of value: Tag name followed by a description that will be shown in the webinterface Default value: None Notes: This is an experimental feature. The syntax is likely to change in future versions. Client-specific tags allow Privoxy admins to create different profiles and let the users chose which one they want without impacting other users. One use case is allowing users to circumvent certain blocks without having to allow them to circumvent all blocks. This is not possible with the enable-remote-toggle feature because it would bluntly disable all blocks for all users and also affect other actions like filters. It also is set globally which renders it useless in most multi-user setups. After a client-specific tag has been defined with the client-specific-tag directive, action sections can be activated based on the tag by using a CLIENT-TAG pattern. The CLIENT-TAG pattern is evaluated at the same priority as URL patterns, as a result the last matching pattern wins. Tags that are created based on client or server headers are evaluated later on and can overrule CLIENT-TAG and URL patterns! The tag is set for all requests that come from clients that requested it to be set. Note that "clients" are differentiated by IP address, if the IP address changes the tag has to be requested again. Clients can request tags to be set by using the CGI interface http://config.privoxy.org/client-tags. The specific tag description is only used on the web page and should be phrased in away that the user understand the effect of the tag. Examples: # Define a couple of tags, the described effect requires action sections # that are enabled based on CLIENT-TAG patterns. client-specific-tag circumvent-blocks Overrule blocks but do not affect other actions disable-content-filters Disable content-filters but do not affect other actions client-tag-lifetime Specifies: How long a temporarily enabled tag remains enabled. Type of value: Time in seconds. Default value: 60 Notes: This is an experimental feature. The syntax is likely to change in future versions. In case of some tags users may not want to enable them permanently, but only for a short amount of time, for example to circumvent a block that is the result of an overly-broad URL pattern. The CGI interface http://config.privoxy.org/client-tags therefore provides a "enable this tag temporarily" option. If it is used, the tag will be set until the client-tag-lifetime is over. Examples: # Increase the time to life for temporarily enabled tags to 3 minutes client-tag-lifetime 180 trust-x-forwarded-for Specifies: Whether or not Privoxy should use IP addresses specified with the X-Forwarded-For header Type of value: 0 or one Default value: 0 Notes: This is an experimental feature. The syntax is likely to change in future versions. If clients reach Privoxy through another proxy, for example a load balancer, Privoxy can't tell the client's IP address from the connection. If multiple clients use the same proxy, they will share the same client tag settings which is usually not desired. This option lets Privoxy use the X-Forwarded-For header value as client IP address. If the proxy sets the header, multiple clients using the same proxy do not share the same client tag settings. This option should only be enabled if Privoxy can only be reached through a proxy and if the proxy can be trusted to set the header correctly. It is recommended that ACL are used to make sure only trusted systems can reach Privoxy. If access to Privoxy isn't limited to trusted systems, this option would allow malicious clients to change the client tags for other clients or increase Privoxy's memory requirements by registering lots of client tag settings for clients that don't exist. Examples: # Allow systems that can reach Privoxy to provide the client # IP address with a X-Forwarded-For header. trust-x-forwarded-for 1 receive-buffer-size Specifies: The size of the buffer Privoxy uses to receive data from the server. Type of value: Size in bytes Default value: 5000 Notes: Increasing the receive-buffer-size increases Privoxy's memory usage but can lower the number of context switches and thereby reduce the cpu usage and potentially increase the throughput. This is mostly relevant for fast network connections and large downloads that don't require filtering. Reducing the buffer size reduces the amount of memory Privoxy needs to handle the request but increases the number of systemcalls and may reduce the throughput. A dtrace command like: sudo dtrace -n 'syscall::read:return /execname == "privoxy"/ { @[execname] = llquantize(arg0, 10, 0, 5, 20); @m = max(arg0)}' can be used to properly tune the receive-buffer-size. On systems without dtrace, strace or truss may be used as less convenient alternatives. If the buffer is too large it will increase Privoxy's memory footprint without any benefit. As the memory is (currently) cleared before using it, a buffer that is too large can actually reduce the throughput. Examples: # Increase the receive buffer size receive-buffer-size 32768 TLS/SSL ca-directory Specifies: Directory with the CA key, the CA certificate and the trusted CAs file. Type of value: Text Default value: Empty string Effect if unset: Default value is used. Notes: This directive specifies the directory where the CA key, the CA certificate and the trusted CAs file are located. Examples: ca-directory /usr/local/etc/privoxy/CA @@#ca-directory /usr/local/etc/privoxy/CA]]> ca-cert-file Specifies: The CA certificate file in ".crt" format. Type of value: Text Default value: cacert.crt Effect if unset: Default value is used. Notes: This directive specifies the name of the CA certificate file in ".crt" format. It can be generated with: openssl req -new -x509 -extensions v3_ca -keyout cakey.pem -out cacert.crt -days 3650 Examples: ca-cert-file root.crt @@#ca-cert-file cacert.crt]]> ca-key-file Specifies: The CA key file in ".pem" format. Type of value: Text Default value: cacert.pem Effect if unset: Default value is used. Notes: This directive specifies the name of the CA key file in ".pem" format. See the ca-cert-file for a command to generate it. Examples: ca-key-file cakey.pem @@#ca-key-file root.pem]]> ca-password Specifies: The password for the CA keyfile. Type of value: Text Default value: Empty string Effect if unset: Default value is used. Notes: This directive specifies the password for the CA keyfile that is used when Privoxy generates certificates for intercepted requests. Note that the password is shown on the CGI page so don't reuse an important one. Examples: ca-password blafasel @@#ca-password swordfish]]> certificate-directory Specifies: Directory to safe generated keys and certificates. Type of value: Text Default value: ./certs Effect if unset: Default value is used. Notes: This directive specifies the directory where generated TLS/SSL keys and certificates are saved. Examples: certificate-directory /usr/local/var/privoxy/certs @@#certificate-directory /usr/local/var/privoxy/certs]]> trusted-cas-file Specifies: The trusted CAs file in ".pem" format. Type of value: File name relative to ca-directory Default value: trustedCAs.pem Effect if unset: Default value is used. Notes: This directive specifies the trusted CAs file that is used when validating certificates for intercepted TLS/SSL request. An example file can be downloaded from https://curl.haxx.se/ca/cacert.pem. Examples: trusted-cas-file trusted_cas_file.pem @@#trusted-cas-file trustedCAs.pem]]> Windows GUI Options Privoxy has a number of options specific to the Windows GUI interface: @@]]> If activity-animation is set to 1, the Privoxy icon will animate when Privoxy is active. To turn off, set to 0. @@#activity-animation 1]]> activity-animation 1 ]]> @@]]> If log-messages is set to 1, Privoxy copies log messages to the console window. The log detail depends on the debug directive. @@#log-messages 1]]> log-messages 1 ]]> @@]]> If log-buffer-size is set to 1, the size of the log buffer, i.e. the amount of memory used for the log messages displayed in the console window, will be limited to log-max-lines (see below). Warning: Setting this to 0 will result in the buffer to grow infinitely and eat up all your memory! @@#log-buffer-size 1]]> log-buffer-size 1 ]]> @@]]> log-max-lines is the maximum number of lines held in the log buffer. See above. @@#log-max-lines 200]]> log-max-lines 200 ]]> @@]]> If log-highlight-messages is set to 1, Privoxy will highlight portions of the log messages with a bold-faced font: @@#log-highlight-messages 1]]> log-highlight-messages 1 ]]> @@]]> The font used in the console window: @@#log-font-name Comic Sans MS]]> log-font-name Comic Sans MS ]]> @@]]> Font size used in the console window: @@#log-font-size 8]]> log-font-size 8 ]]> @@]]> show-on-task-bar controls whether or not Privoxy will appear as a button on the Task bar when minimized: @@#show-on-task-bar 0]]> show-on-task-bar 0 ]]> @@]]> If close-button-minimizes is set to 1, the Windows close button will minimize Privoxy instead of closing the program (close with the exit option on the File menu). @@#close-button-minimizes 1]]> close-button-minimizes 1 ]]> @@]]> The hide-console option is specific to the MS-Win console version of Privoxy. If this option is used, Privoxy will disconnect from and hide the command console. @@#hide-console]]> #hide-console ]]>
]]>