]>
Privoxy Developer Manual Copyright &my-copy; 2001, 2002 by Privoxy Developers $Id: developer-manual.sgml,v 1.46.2.8 2002/08/17 00:16:10 hal9 Exp $ This is here to keep vim syntax file from breaking :/ If I knew enough to fix it, I would. PLEASE DO NOT REMOVE! HB: hal@foobox.net ]]> The developer manual provides guidance on coding, testing, packaging, documentation and other issues of importance to those involved with Privoxy development. It is mandatory (and helpful!) reading for anyone who wants to join the team. Please note that this document is constantly evolving. This copy represents the state at the release of version &p-version;. You can find the latest version of the this manual at http://www.privoxy.org/developer-manual/. Please see the Contact section on how to contact the developers. Introduction Privoxy, as an heir to Junkbuster, is an Open Source project and licensed under the GPL. As such, Privoxy development is potentially open to anyone who has the time, knowledge, and desire to contribute in any capacity. Our goals are simply to continue the mission, to improve Privoxy, and to make it available to as wide an audience as possible. One does not have to be a programmer to contribute. Packaging, testing, and porting, are all important jobs as well. Quickstart to Privoxy Development You'll need an account on Sourceforge to support our development. Mail your ID to the list and wait until a project manager has added you. You will also need to have a cvs package installed, which will entail having ssh installed as well (which seems to be a requirement of SourceForge), in order to access the cvs repository. Having the GNU build tools is also going to be important (particularly, autoconf and gmake). For the time being (read, this section is under construction), please refer to the extensive comments in the source code. The CVS Repository If you intend to help us with programming, documentation or packaging you will need write access to our holy grail, the CVS repository. Please read this chapter completely before accessing via CVS. Access to CVS The project's CVS repository is hosted on SourceForge. Please refer to the chapters 6 and 7 in SF's site documentation for the technical access details for your operating system. For historical reasons, the CVS server is called cvs.ijbswa.sourceforge.net, the repository is called ijbswa, and the source tree module is called current. Branches Within the CVS repository, there are modules and branches. As mentioned, the sources are in the current module. Other modules are present for platform specific issues. There is a webview of the CVS hierarchy at http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/ijbswa/, which might help with visualizing how these pieces fit together. Branches are used to fork a sub-development path from the main trunk. Within the current module where the sources are, there is always at least one branch from the main trunk devoted to a stable release series. The main trunk is where active development takes place for the next stable series (e.g. 3.2.x). So just prior to each stable series (e.g. 3.0.x), a branch is created just for stable series releases (e.g. 3.0.0 -> 3.0.1 -> 3.0.2, etc). Once the initial stable release of any stable branch has taken place, this branch is only used for bugfixes, which have had prior testing before being committed to CVS. (See Version Numbers below for details on versioning.) CVS Commit Guidelines The source tree is the heart of every software project. Every effort must be made to ensure that it is readable, compilable and consistent at all times. There are differing guidelines for the stable branch and the main development trunk, and we ask anyone with CVS access to strictly adhere to the following guidelines: Basic Guidelines, for all branches: Never (read: never, ever) be tempted to commit that small change without testing it thoroughly first. When we're close to a public release, ask a fellow developer to review your changes. Your commit message should give a concise overview of what you changed (no big details) and why you changed it Just check previous messages for good examples. Don't use the same message on multiple files, unless it equally applies to all those files. If your changes span multiple files, and the code won't recompile unless all changes are committed (e.g. when changing the signature of a function), then commit all files one after another, without long delays in between. If necessary, prepare the commit messages in advance. Before changing things on CVS, make sure that your changes are in line with the team's general consensus on what should be done. Note that near a major public release, we get more cautious. There is always the possibility to submit a patch to the patch tracker instead. Stable branches are handled with more care, especially after the initial *.*.0 release, and we are just in bugfix mode. In addition to the above, the below applies only to the stable branch (currently the v_3_0_branchpoint branch): Do not commit anything into the stable branch, unless immediately before a new release! There needs to be testing done before it hits CVS, and to ensure that all changes are appropriate just to fix whatever the problem is. Submit any proposed changes as patches first to the patch tracker on Sourceforge: http://sourceforge.net/tracker/?group_id=11118&atid=311118. Then ask for peer review. Do not commit anything unless your patches been well tested first, by other members of the project, and has prior approval of the project leaders or consensus of the devel list. Do not even think about anything except bugfixes. No new features! Documentation Guidelines All formal documents are maintained in Docbook SGML and located in the doc/source/* directory. You will need Docbook, the Docbook DTD's and the Docbook modular stylesheets (or comparable alternatives), and either jade or openjade (recommended) installed in order to build docs from source. Currently there is user-manual, FAQ, and, of course this, the developer-manual in this format. The README, AUTHORS privoxy.1 (man page), and config files are also now maintained as Docbook SGML. These files, when built, in the top-level source directory are generated files! Also, the Privoxy index.html (and a variation on this file, privoxy-index.html, meant for inclusion with doc packages), are maintained as SGML as well. DO NOT edit these directly. Edit the SGML source, or contact someone involved in the documentation (at present Hal). config requires some special handling. The reason it is maintained this way is so that the extensive comments in the file mirror those in user-manual. But the conversion process requires going from SGML to HTML to text to special formatting required for the embedded comments. Some of this does not survive so well. Especially some of the examples that are longer than 80 characters. The build process for this file outputs to config.new, which should be reviewed for errors and mis-formatting. Once satisfied that it is correct, then it should be hand copied to config. Other, less formal documents (e.g. LICENSE, INSTALL) are maintained as plain text files in the top-level source directory. At least for the time being. Packagers are encouraged to include this documentation. For those without the ability to build the docs locally, text versions of each are kept in CVS. HTML versions are also now being kept in CVS under doc/webserver/*. Formal documents are built with the Makefile targets of make dok, or alternately make redhat-dok. If you have problems, try both. The build process uses the document SGML sources in doc/source/*/* to update all text files in doc/text/ and to update all HTML documents in doc/webserver/. Documentation writers should please make sure documents build successfully before committing to CVS, if possible. How do you update the webserver (i.e. the pages on privoxy.org)? First, build the docs by running make dok (or alternately make redhat-dok). For PDF docs, do make dok-pdf. Run make webserver which copies all files from doc/webserver to the sourceforge webserver via scp. Finished docs should be occasionally submitted to CVS (doc/webserver/*/*.html) so that those without the ability to build them locally, have access to them if needed. This is especially important just prior to a new release! Please do this after the $VERSION and other release specific data in configure.in has been updated (this is done just prior to a new release). Quickstart to Docbook and SGML If you are not familiar with SGML, it is a markup language similar to HTML. Actually, not a mark up language per se, but a language used to define markup languages. In fact, HTML is an SGML application. Both will use tags to format text and other content. SGML tags can be much more varied, and flexible, but do much of the same kinds of things. The tags, or elements, are definable in SGML. There is no set standards. Since we are using Docbook, our tags are those that are defined by Docbook. Much of how the finish document is rendered is determined by the stylesheets. The stylesheets determine how each tag gets translated to HTML, or other formats. Tags in Docbook SGML need to be always closed. If not, you will likely generate errors. Example: <title>My Title</title>. They are also case-insensitive, but we strongly suggest using all lower case. This keeps compatibility with [Docbook] XML. Our documents use sections for the most part. Sections will be processed into HTML headers (e.g. h1 for sect1). The Docbook stylesheets will use these to also generate the Table of Contents for each doc. Our TOC's are set to a depth of three. Meaning sect1, sect2, and sect3 will have TOC entries, but sect4 will not. Each section requires a <title> element, and at least one <para>. There is a limit of five section levels in Docbook, but generally three should be sufficient for our purposes. Some common elements that you likely will use: <para></para>, paragraph delimiter. Most text needs to be within paragraph elements (there are some exceptions). <emphasis></emphasis>, the stylesheets make this italics. <filename></filename>, files and directories. <command></command>, command examples. <literallayout></literallayout>, like <pre>, more or less. <itemizedlist></itemizedlist>, list with bullets. <listitem></listitem>, member of the above. <screen></screen>, screen output, implies <literallayout>. <ulink url="example.com"></ulink>, like HTML <a> tag. <quote></quote>, for, doh, quoting text. Look at any of the existing docs for examples of all these and more. You might also find Writing Documentation Using DocBook - A Crash Course useful. <application>Privoxy</application> Documentation Style It will be easier if everyone follows a similar writing style. This just makes it easier to read what someone else has written if it is all done in a similar fashion. Here it is: All tags should be lower case. Tags delimiting a block of text (even small blocks) should be on their own line. Like: <para> Some text goes here. </para> Tags marking individual words, or few words, should be in-line: Just to <emphasis>emphasize</emphasis>, some text goes here. Tags should be nested and step indented for block text like: (except in-line tags) <para> <itemizedlist> <para> <listitem> Some text goes here in our list example. </listitem> </para> </itemizedlist> </para> This makes it easier to find the text amongst the tags ;-) Use white space to separate logical divisions within a document, like between sections. Running everything together consistently makes it harder to read and work on. Do not hesitate to make comments. Comments can either use the <comment> element, or the <!-- --> style comment familiar from HTML. (Note in Docbook v4.x <comment> is replaced by <remark>.) We have an international audience. Refrain from slang, or English idiosyncrasies (too many to list :). Humor also does not translate well sometimes. Try to keep overall line lengths in source files to 80 characters or less for obvious reasons. This is not always possible, with lengthy URLs for instance. Our documents are available in differing formats. Right now, they are just plain text, TML, and PDF, but others are always a future possibility. Be careful with URLs (<ulink>), and avoid this mistake: My favorite site is <ulink url="http://example.com">here</ulink>. This will render as My favorite site is here, which is not real helpful in a text doc. Better like this: My favorite site is <ulink url="http://example.com">example.com</ulink>. All documents should be spell checked occasionally. aspell can check SGML with the -H option. (ispell I think too.) Privoxy Custom Entities Privoxy documentation is using a number of customized entities to facilitate documentation maintenance. We are using a set of boilerplate files with generic text, that is used by multiple docs. This way we can write something once, and use it repeatedly without having to re-write the same content over and over again. If editing such a file, keep in mind that it should be generic. That is the purpose; so it can be used in varying contexts without additional modifications. We are also using what Docbook calls internal entities. These are like variables in programming. Well, sort of. For instance, we have the p-version entity that contains the current Privoxy version string. You are strongly encouraged to use these where possible. Some of these obviously require re-setting with each release (done by the Makefile). A sampling of custom entities are listed below. See any of the main docs for examples. Re- boilerplate text entities are defined like: <!entity supported SYSTEM "supported.sgml"> In this example, the contents of the file, supported.sgml is available for inclusion anywhere in the doc. To make this happen, just reference the now defined entity: &supported; (starts with an ampersand and ends with a semi-colon), and the contents will be dumped into the finished doc at that point. Commonly used internal entities: p-version: the Privoxy version string, e.g. &p-version;. p-status: the project status, either alpha, beta, or stable. p-not-stable: use to conditionally include text in not stable releases (e.g. beta). p-stable: just the opposite. p-text: this doc is only generated as text. There are others in various places that are defined for a specific purpose. Read the source! Coding Guidelines Introduction This set of standards is designed to make our lives easier. It is developed with the simple goal of helping us keep the "new and improved Privoxy" consistent and reliable. Thus making maintenance easier and increasing chances of success of the project. And that of course comes back to us as individuals. If we can increase our development and product efficiencies then we can solve more of the request for changes/improvements and in general feel good about ourselves. ;-> Using Comments Comment, Comment, Comment Explanation: Comment as much as possible without commenting the obvious. For example do not comment "aVariable is equal to bVariable". Instead explain why aVariable should be equal to the bVariable. Just because a person can read code does not mean they will understand why or what is being done. A reader may spend a lot more time figuring out what is going on when a simple comment or explanation would have prevented the extra research. Please help your brother IJB'ers out! The comments will also help justify the intent of the code. If the comment describes something different than what the code is doing then maybe a programming error is occurring. Example: /* if page size greater than 1k ... */ if ( PageLength() > 1024 ) { ... "block" the page up ... } /* if page size is small, send it in blocks */ if ( PageLength() > 1024 ) { ... "block" the page up ... } This demonstrates 2 cases of "what not to do". The first is a "syntax comment". The second is a comment that does not fit what is actually being done. Use blocks for comments Explanation: Comments can help or they can clutter. They help when they are differentiated from the code they describe. One line comments do not offer effective separation between the comment and the code. Block identifiers do, by surrounding the code with a clear, definable pattern. Example: /********************************************************************* * This will stand out clearly in your code! *********************************************************************/ if ( thisVariable == thatVariable ) { DoSomethingVeryImportant(); } /* unfortunately, this may not */ if ( thisVariable == thatVariable ) { DoSomethingVeryImportant(); } if ( thisVariable == thatVariable ) /* this may not either */ { DoSomethingVeryImportant(); } Exception: If you are trying to add a small logic comment and do not wish to "disrupt" the flow of the code, feel free to use a 1 line comment which is NOT on the same line as the code. Keep Comments on their own line Explanation: It goes back to the question of readability. If the comment is on the same line as the code it will be harder to read than the comment that is on its own line. There are three exceptions to this rule, which should be violated freely and often: during the definition of variables, at the end of closing braces, when used to comment parameters. Example: /********************************************************************* * This will stand out clearly in your code, * But the second example won't. *********************************************************************/ if ( thisVariable == thatVariable ) { DoSomethingVeryImportant(); } if ( thisVariable == thatVariable ) /*can you see me?*/ { DoSomethingVeryImportant(); /*not easily*/ } /********************************************************************* * But, the encouraged exceptions: *********************************************************************/ int urls_read = 0; /* # of urls read + rejected */ int urls_rejected = 0; /* # of urls rejected */ if ( 1 == X ) { DoSomethingVeryImportant(); } short DoSomethingVeryImportant( short firstparam, /* represents something */ short nextparam /* represents something else */ ) { ...code here... } /* -END- DoSomethingVeryImportant */ Comment each logical step Explanation: Logical steps should be commented to help others follow the intent of the written code and comments will make the code more readable. If you have 25 lines of code without a comment, you should probably go back into it to see where you forgot to put one. Most "for", "while", "do", etc... loops _probably_ need a comment. After all, these are usually major logic containers. Comment All Functions Thoroughly Explanation: A reader of the code should be able to look at the comments just prior to the beginning of a function and discern the reason for its existence and the consequences of using it. The reader should not have to read through the code to determine if a given function is safe for a desired use. The proper information thoroughly presented at the introduction of a function not only saves time for subsequent maintenance or debugging, it more importantly aids in code reuse by allowing a user to determine the safety and applicability of any function for the problem at hand. As a result of such benefits, all functions should contain the information presented in the addendum section of this document. Comment at the end of braces if the content is more than one screen length Explanation: Each closing brace should be followed on the same line by a comment that describes the origination of the brace if the original brace is off of the screen, or otherwise far away from the closing brace. This will simplify the debugging, maintenance, and readability of the code. As a suggestion , use the following flags to make the comment and its brace more readable: use following a closing brace: } /* -END- if() or while () or etc... */ Example: if ( 1 == X ) { DoSomethingVeryImportant(); ...some long list of commands... } /* -END- if x is 1 */ or: if ( 1 == X ) { DoSomethingVeryImportant(); ...some long list of commands... } /* -END- if ( 1 == X ) */ Naming Conventions Variable Names Explanation: Use all lowercase, and separate words via an underscore ('_'). Do not start an identifier with an underscore. (ANSI C reserves these for use by the compiler and system headers.) Do not use identifiers which are reserved in ANSI C++. (E.g. template, class, true, false, ...). This is in case we ever decide to port Privoxy to C++. Example: int ms_iis5_hack = 0; Instead of: int msiis5hack = 0; int msIis5Hack = 0; Function Names Explanation: Use all lowercase, and separate words via an underscore ('_'). Do not start an identifier with an underscore. (ANSI C reserves these for use by the compiler and system headers.) Do not use identifiers which are reserved in ANSI C++. (E.g. template, class, true, false, ...). This is in case we ever decide to port Privoxy to C++. Example: int load_some_file( struct client_state *csp ) Instead of: int loadsomefile( struct client_state *csp ) int loadSomeFile( struct client_state *csp ) Header file prototypes Explanation: Use a descriptive parameter name in the function prototype in header files. Use the same parameter name in the header file that you use in the c file. Example: (.h) extern int load_aclfile( struct client_state *csp ); (.c) int load_aclfile( struct client_state *csp ) Instead of: (.h) extern int load_aclfile( struct client_state * ); or (.h) extern int load_aclfile(); (.c) int load_aclfile( struct client_state *csp ) Enumerations, and #defines Explanation: Use all capital letters, with underscores between words. Do not start an identifier with an underscore. (ANSI C reserves these for use by the compiler and system headers.) Example: (enumeration) : enum Boolean { FALSE, TRUE }; (#define) : #define DEFAULT_SIZE 100; Note: We have a standard naming scheme for #defines that toggle a feature in the preprocessor: FEATURE_>, where > is a short (preferably 1 or 2 word) description. Example: #define FEATURE_FORCE 1 #ifdef FEATURE_FORCE #define FORCE_PREFIX blah #endif /* def FEATURE_FORCE */ Constants Explanation: Spell common words out entirely (do not remove vowels). Use only widely-known domain acronyms and abbreviations. Capitalize all letters of an acronym. Use underscore (_) to separate adjacent acronyms and abbreviations. Never terminate a name with an underscore. Example: #define USE_IMAGE_LIST 1 Instead of: #define USE_IMG_LST 1 or #define _USE_IMAGE_LIST 1 or #define USE_IMAGE_LIST_ 1 or #define use_image_list 1 or #define UseImageList 1 Using Space Put braces on a line by themselves. Explanation: The brace needs to be on a line all by itself, not at the end of the statement. Curly braces should line up with the construct that they're associated with. This practice makes it easier to identify the opening and closing braces for a block. Example: if ( this == that ) { ... } Instead of: if ( this == that ) { ... } or if ( this == that ) { ... } Note: In the special case that the if-statement is inside a loop, and it is trivial, i.e. it tests for a condition that is obvious from the purpose of the block, one-liners as above may optically preserve the loop structure and make it easier to read. Status: developer-discretion. Example exception: while ( more lines are read ) { /* Please document what is/is not a comment line here */ if ( it's a comment ) continue; do_something( line ); } ALL control statements should have a block Explanation: Using braces to make a block will make your code more readable and less prone to error. All control statements should have a block defined. Example: if ( this == that ) { DoSomething(); DoSomethingElse(); } Instead of: if ( this == that ) DoSomething(); DoSomethingElse(); or if ( this == that ) DoSomething(); Note: The first example in "Instead of" will execute in a manner other than that which the developer desired (per indentation). Using code braces would have prevented this "feature". The "explanation" and "exception" from the point above also applies. Do not belabor/blow-up boolean expressions Example: structure->flag = ( condition ); Instead of: if ( condition ) { structure->flag = 1; } else { structure->flag = 0; } Note: The former is readable and concise. The later is wordy and inefficient. Please assume that any developer new to the project has at least a "good" knowledge of C/C++. (Hope I do not offend by that last comment ... 8-) Use white space freely because it is free Explanation: Make it readable. The notable exception to using white space freely is listed in the next guideline. Example: int firstValue = 0; int someValue = 0; int anotherValue = 0; int thisVariable = 0; if ( thisVariable == thatVariable ) firstValue = oldValue + ( ( someValue - anotherValue ) - whatever ) Don't use white space around structure operators Explanation: - structure pointer operator ( "->" ) - member operator ( "." ) - functions and parentheses It is a general coding practice to put pointers, references, and function parentheses next to names. With spaces, the connection between the object and variable/function name is not as clear. Example: aStruct->aMember; aStruct.aMember; FunctionName(); Instead of: aStruct -> aMember; aStruct . aMember; FunctionName (); Make the last brace of a function stand out Example: int function1( ... ) { ...code... return( retCode ); } /* -END- function1 */ int function2( ... ) { } /* -END- function2 */ Instead of: int function1( ... ) { ...code... return( retCode ); } int function2( ... ) { } Note: Use 1 blank line before the closing brace and 2 lines afterward. This makes the end of function standout to the most casual viewer. Although function comments help separate functions, this is still a good coding practice. In fact, I follow these rules when using blocks in "for", "while", "do" loops, and long if {} statements too. After all whitespace is free! Status: developer-discretion on the number of blank lines. Enforced is the end of function comments. Use 3 character indentions Explanation: If some use 8 character TABs and some use 3 character TABs, the code can look *very* ragged. So use 3 character indentions only. If you like to use TABs, pass your code through a filter such as "expand -t3" before checking in your code. Example: static const char * const url_code_map[256] = { NULL, ... }; int function1( ... ) { if ( 1 ) { return( ALWAYS_TRUE ); } else { return( HOW_DID_YOU_GET_HERE ); } return( NEVER_GETS_HERE ); } Initializing Initialize all variables Explanation: Do not assume that the variables declared will not be used until after they have been assigned a value somewhere else in the code. Remove the chance of accidentally using an unassigned variable. Example: short anShort = 0; float aFloat = 0; struct *ptr = NULL; Note: It is much easier to debug a SIGSEGV if the message says you are trying to access memory address 00000000 and not 129FA012; or arrayPtr[20] causes a SIGSEV vs. arrayPtr[0]. Status: developer-discretion if and only if the variable is assigned a value "shortly after" declaration. Functions Name functions that return a boolean as a question. Explanation: Value should be phrased as a question that would logically be answered as a true or false statement Example: ShouldWeBlockThis(); ContainsAnImage(); IsWebPageBlank(); Always specify a return type for a function. Explanation: The default return for a function is an int. To avoid ambiguity, create a return for a function when the return has a purpose, and create a void return type if the function does not need to return anything. Minimize function calls when iterating by using variables Explanation: It is easy to write the following code, and a clear argument can be made that the code is easy to understand: Example: for ( size_t cnt = 0; cnt < blockListLength(); cnt ++ ) { .... } Note: Unfortunately, this makes a function call for each and every iteration. This increases the overhead in the program, because the compiler has to look up the function each time, call it, and return a value. Depending on what occurs in the blockListLength() call, it might even be creating and destroying structures with each iteration, even though in each case it is comparing "cnt" to the same value, over and over. Remember too - even a call to blockListLength() is a function call, with the same overhead. Instead of using a function call during the iterations, assign the value to a variable, and evaluate using the variable. Example: size_t len = blockListLength(); for ( size_t cnt = 0; cnt < len; cnt ++ ) { .... } Exceptions: if the value of blockListLength() *may* change or could *potentially* change, then you must code the function call in the for/while loop. Pass and Return by Const Reference Explanation: This allows a developer to define a const pointer and call your function. If your function does not have the const keyword, we may not be able to use your function. Consider strcmp, if it were defined as: extern int strcmp( char *s1, char *s2 ); I could then not use it to compare argv's in main: int main( int argc, const char *argv[] ) { strcmp( argv[0], "privoxy" ); } Both these pointers are *const*! If the c runtime library maintainers do it, we should too. Pass and Return by Value Explanation: Most structures cannot fit onto a normal stack entry (i.e. they are not 4 bytes or less). Aka, a function declaration like: int load_aclfile( struct client_state csp ) would not work. So, to be consistent, we should declare all prototypes with "pass by value": int load_aclfile( struct client_state *csp ) Names of include files Explanation: Your include statements should contain the file name without a path. The path should be listed in the Makefile, using -I as processor directive to search the indicated paths. An exception to this would be for some proprietary software that utilizes a partial path to distinguish their header files from system or other header files. Example: #include <iostream.h> /* This is not a local include */ #include "config.h" /* This IS a local include */ Exception: /* This is not a local include, but requires a path element. */ #include <sys/fileName.h> Note: Please! do not add "-I." to the Makefile without a _very_ good reason. This duplicates the #include "file.h" behavior. Provide multiple inclusion protection Explanation: Prevents compiler and linker errors resulting from redefinition of items. Wrap each header file with the following syntax to prevent multiple inclusions of the file. Of course, replace PROJECT_H with your file name, with "." Changed to "_", and make it uppercase. Example: #ifndef PROJECT_H_INCLUDED #define PROJECT_H_INCLUDED ... #endif /* ndef PROJECT_H_INCLUDED */ Use `extern "C"` when appropriate Explanation: If our headers are included from C++, they must declare our functions as `extern "C"`. This has no cost in C, but increases the potential re-usability of our code. Example: #ifdef __cplusplus extern "C" { #endif /* def __cplusplus */ ... function definitions here ... #ifdef __cplusplus } #endif /* def __cplusplus */ Where Possible, Use Forward Struct Declaration Instead of Includes Explanation: Useful in headers that include pointers to other struct's. Modifications to excess header files may cause needless compiles. Example: /********************************************************************* * We're avoiding an include statement here! *********************************************************************/ struct file_list; extern file_list *xyz; Note: If you declare "file_list xyz;" (without the pointer), then including the proper header file is necessary. If you only want to prototype a pointer, however, the header file is unnecessary. Status: Use with discretion. General Coding Practices Turn on warnings Explanation Compiler warnings are meant to help you find bugs. You should turn on as many as possible. With GCC, the switch is "-Wall". Try and fix as many warnings as possible. Provide a default case for all switch statements Explanation: What you think is guaranteed is never really guaranteed. The value that you don't think you need to check is the one that someday will be passed. So, to protect yourself from the unknown, always have a default step in a switch statement. Example: switch( hash_string( cmd ) ) { case hash_actions_file : ... code ... break; case hash_confdir : ... code ... break; default : log_error( ... ); ... anomaly code goes here ... continue; / break; / exit( 1 ); / etc ... } /* end switch( hash_string( cmd ) ) */ Note: If you already have a default condition, you are obviously exempt from this point. Of note, most of the WIN32 code calls `DefWindowProc' after the switch statement. This API call *should* be included in a default statement. Another Note: This is not so much a readability issue as a robust programming issue. The "anomaly code goes here" may be no more than a print to the STDERR stream (as in load_config). Or it may really be an ABEND condition. Status: Programmer discretion is advised. Try to avoid falling through cases in a switch statement. Explanation: In general, you will want to have a 'break' statement within each 'case' of a switch statement. This allows for the code to be more readable and understandable, and furthermore can prevent unwanted surprises if someone else later gets creative and moves the code around. The language allows you to plan the fall through from one case statement to another simply by omitting the break statement within the case statement. This feature does have benefits, but should only be used in rare cases. In general, use a break statement for each case statement. If you choose to allow fall through, you should comment both the fact of the fall through and reason why you felt it was necessary. Use 'long' or 'short' Instead of 'int' Explanation: On 32-bit platforms, int usually has the range of long. On 16-bit platforms, int has the range of short. Status: open-to-debate. In the case of most FSF projects (including X/GNU-Emacs), there are typedefs to int4, int8, int16, (or equivalence ... I forget the exact typedefs now). Should we add these to IJB now that we have a "configure" script? Don't mix size_t and other types Explanation: The type of size_t varies across platforms. Do not make assumptions about whether it is signed or unsigned, or about how long it is. Do not compare a size_t against another variable of a different type (or even against a constant) without casting one of the values. Try to avoid using size_t if you can. Declare each variable and struct on its own line. Explanation: It can be tempting to declare a series of variables all on one line. Don't. Example: long a = 0; long b = 0; long c = 0; Instead of: long a, b, c; Explanation: - there is more room for comments on the individual variables - easier to add new variables without messing up the original ones - when searching on a variable to find its type, there is less clutter to "visually" eliminate Exceptions: when you want to declare a bunch of loop variables or other trivial variables; feel free to declare them on 1 line. You should, although, provide a good comment on their functions. Status: developer-discretion. Use malloc/zalloc sparingly Explanation: Create a local struct (on the stack) if the variable will live and die within the context of one function call. Only "malloc" a struct (on the heap) if the variable's life will extend beyond the context of one function call. Example: If a function creates a struct and stores a pointer to it in a list, then it should definitely be allocated via `malloc'. The Programmer Who Uses 'malloc' is Responsible for Ensuring 'free' Explanation: If you have to "malloc" an instance, you are responsible for insuring that the instance is `free'd, even if the deallocation event falls within some other programmer's code. You are also responsible for ensuring that deletion is timely (i.e. not too soon, not too late). This is known as "low-coupling" and is a "good thing (tm)". You may need to offer a free/unload/destructor type function to accommodate this. Example: int load_re_filterfile( struct client_state *csp ) { ... } static void unload_re_filterfile( void *f ) { ... } Exceptions: The developer cannot be expected to provide `free'ing functions for C run-time library functions ... such as `strdup'. Status: developer-discretion. The "main" use of this standard is for allocating and freeing data structures (complex or nested). Add loaders to the `file_list' structure and in order Explanation: I have ordered all of the "blocker" file code to be in alpha order. It is easier to add/read new blockers when you expect a certain order. Note: It may appear that the alpha order is broken in places by POPUP tests coming before PCRS tests. But since POPUPs can also be referred to as KILLPOPUPs, it is clear that it should come first. "Uncertain" new code and/or changes to existing code, use FIXME Explanation: If you have enough confidence in new code or confidence in your changes, but are not *quite* sure of the repercussions, add this: /* FIXME: this code has a logic error on platform XYZ, * attempting to fix */ #ifdef PLATFORM ...changed code here... #endif or: /* FIXME: I think the original author really meant this... */ ...changed code here... or: /* FIXME: new code that *may* break something else... */ ...new code here... Note: If you make it clear that this may or may not be a "good thing (tm)", it will be easier to identify and include in the project (or conversely exclude from the project). Addendum: Template for files and function comment blocks: Example for file comments: const char FILENAME_rcs[] = "$Id: developer-manual.sgml,v 1.46.2.8 2002/08/17 00:16:10 hal9 Exp $"; /********************************************************************* * * File : $Source$ * * Purpose : (Fill me in with a good description!) * * Copyright : Written by and Copyright (C) 2001 the SourceForge * Privoxy team. http://www.privoxy.org/ * * Based on the Internet Junkbuster originally written * by and Copyright (C) 1997 Anonymous Coders and * Junkbusters Corporation. http://www.junkbusters.com * * This program is free software; you can redistribute it * and/or modify it under the terms of the GNU General * Public License as published by the Free Software * Foundation; either version 2 of the License, or (at * your option) any later version. * * This program is distributed in the hope that it will * be useful, but WITHOUT ANY WARRANTY; without even the * implied warranty of MERCHANTABILITY or FITNESS FOR A * PARTICULAR PURPOSE. See the GNU General Public * License for more details. * * The GNU General Public License should be included with * this file. If not, you can view it at * http://www.gnu.org/copyleft/gpl.html * or write to the Free Software Foundation, Inc., 59 * Temple Place - Suite 330, Boston, MA 02111-1307, USA. * * Revisions : * $Log$ * *********************************************************************/ #include "config.h" ...necessary include files for us to do our work... const char FILENAME_h_rcs[] = FILENAME_H_VERSION; Note: This declares the rcs variables that should be added to the "show-proxy-args" page. If this is a brand new creation by you, you are free to change the "Copyright" section to represent the rights you wish to maintain. Note: The formfeed character that is present right after the comment flower box is handy for (X|GNU)Emacs users to skip the verbiage and get to the heart of the code (via `forward-page' and `backward-page'). Please include it if you can. Example for file header comments: #ifndef _FILENAME_H #define _FILENAME_H #define FILENAME_H_VERSION "$Id: developer-manual.sgml,v 1.46.2.8 2002/08/17 00:16:10 hal9 Exp $" /********************************************************************* * * File : $Source$ * * Purpose : (Fill me in with a good description!) * * Copyright : Written by and Copyright (C) 2001 the SourceForge * Privoxy team. http://www.privoxy.org/ * * Based on the Internet Junkbuster originally written * by and Copyright (C) 1997 Anonymous Coders and * Junkbusters Corporation. http://www.junkbusters.com * * This program is free software; you can redistribute it * and/or modify it under the terms of the GNU General * Public License as published by the Free Software * Foundation; either version 2 of the License, or (at * your option) any later version. * * This program is distributed in the hope that it will * be useful, but WITHOUT ANY WARRANTY; without even the * implied warranty of MERCHANTABILITY or FITNESS FOR A * PARTICULAR PURPOSE. See the GNU General Public * License for more details. * * The GNU General Public License should be included with * this file. If not, you can view it at * http://www.gnu.org/copyleft/gpl.html * or write to the Free Software Foundation, Inc., 59 * Temple Place - Suite 330, Boston, MA 02111-1307, USA. * * Revisions : * $Log$ * *********************************************************************/ #include "project.h" #ifdef __cplusplus extern "C" { #endif ... function headers here ... /* Revision control strings from this header and associated .c file */ extern const char FILENAME_rcs[]; extern const char FILENAME_h_rcs[]; #ifdef __cplusplus } /* extern "C" */ #endif #endif /* ndef _FILENAME_H */ /* Local Variables: tab-width: 3 end: */ Example for function comments: /********************************************************************* * * Function : FUNCTION_NAME * * Description : (Fill me in with a good description!) * * parameters : * 1 : param1 = pointer to an important thing * 2 : x = pointer to something else * * Returns : 0 => Ok, everything else is an error. * *********************************************************************/ int FUNCTION_NAME( void *param1, const char *x ) { ... return( 0 ); } Note: If we all follow this practice, we should be able to parse our code to create a "self-documenting" web page. Testing Guidelines To be filled. Testplan for releases Explain release numbers. major, minor. developer releases. etc. Remove any existing rpm with rpm -e Remove any file that was left over. This includes (but is not limited to) /var/log/privoxy /etc/privoxy /usr/sbin/privoxy /etc/init.d/privoxy /usr/doc/privoxy* Install the rpm. Any error messages? start,stop,status Privoxy with the specific script (e.g. /etc/rc.d/init/privoxy stop). Reboot your machine. Does autostart work? Start browsing. Does Privoxy work? Logfile written? Remove the rpm. Any error messages? All files removed? Test reports Please submit test reports only with the test form at sourceforge. Three simple steps: Select category: the distribution you test on. Select group: the version of Privoxy that we are about to release. Fill the Summary and Detailed Description with something intelligent (keep it short and precise). Do not mail to the mailing list (we cannot keep track on issues there). Releasing a New Version When we release versions of Privoxy, our work leaves our cozy secret lab and has to work in the cold RealWorld[tm]. Once it is released, there is no way to call it back, so it is very important that great care is taken to ensure that everything runs fine, and not to introduce problems in the very last minute. So when releasing a new version, please adhere exactly to the procedure outlined in this chapter. The following programs are required to follow this process: ncftpput (ncftp), scp, ssh (ssh), gmake (GNU's version of make), autoconf, cvs. Version numbers First you need to determine which version number the release will have. Privoxy version numbers consist of three numbers, separated by dots, like in X.Y.Z (e.g. 3.0.0), where: X, the version major, is rarely ever changed. It is increased by one if turning a development branch into stable substantially changes the functionality, user interface or configuration syntax. Majors 1 and 2 were Junkbuster, and 3 will be the first stable Privoxy release. Y, the version minor, represents the branch within the major version. At any point in time, there are two branches being maintained: The stable branch, with an even minor, say, 2N, in which no functionality is being added and only bug-fixes are made, and 2N+1, the development branch, in which the further development of Privoxy takes place. This enables us to turn the code upside down and inside out, while at the same time providing and maintaining a stable version. The minor is reset to zero (and one) when the major is incremented. When a development branch has matured to the point where it can be turned into stable, the old stable branch 2N is given up (i.e. no longer maintained), the former development branch 2N+1 becomes the new stable branch 2N+2, and a new development branch 2N+3 is opened. Z, the point or sub version, represents a release of the software within a branch. It is therefore incremented immediately before each code freeze. In development branches, only the even point versions correspond to actual releases, while the odd ones denote the evolving state of the sources on CVS in between. It follows that Z is odd on CVS in development branches most of the time. There, it gets increased to an even number immediately before a code freeze, and is increased to an odd number again immediately thereafter. This ensures that builds from CVS snapshots are easily distinguished from released versions. The point version is reset to zero when the minor changes. In summary, the main CVS trunk is the development branch where new features are being worked on for the next stable series. This should almost always be where the most activity takes place. There is always at least one stable branch from the trunk, e.g now it is 3.0, which is only used to release stable versions. Once the initial .0 release of the stable branch has been done, then as a rule, only bugfixes that have had prior testing should be committed to the stable branch. At that point, it is mostly hands off. Once there are enough bugfixes to justify a new release, the version of this branch is again incremented Example: 3.0.0 -> 3.0.1 -> 3.0.2, etc are all stable releases from within the stable branch. 3.1.x is currently the main trunk, and where work on 3.2.x is taking place. If any questions, please post to the devel list before committing to a stable branch! Before the Release: Freeze The following must be done by one of the developers prior to each new release. Make sure that everybody who has worked on the code in the last couple of days has had a chance to yell no! in case they have pending changes/fixes in their pipelines. Announce the freeze so that nobody will interfere with last minute changes. Increment the version number (point from odd to even in development branches!) in configure.in. (RPM spec files will need to be incremented as well.) If default.action has changed since last release (i.e. software release or standalone actions file release), bump up its version info to A.B in this line: {+add-header{X-Actions-File-Version: A.B} -filter -no-popups} Then change the version info in doc/webserver/actions/index.php, line: '$required_actions_file_version = "A.B";' All documentation should be rebuild after the version bump. Finished docs should be then be committed to CVS (for those without the ability to build these). Some docs may require rather obscure processing tools. config, the man page (and the html version of the man page), and the PDF docs fall in this category. REAMDE, the man page, AUTHORS, and config should all also be committed to CVS for other packagers. The formal docs should be uploaded to the webserver. See the Section "Updating the webserver" in this manual for details. The User Manual is also used for context sensitive help for the CGI editor. This is version sensitive, so that the user will get appropriate help for his/her release. So with each release a fresh version should be uploaded to the webserver (this is in addition to the main User Manual link from the main page since we need to keep manuals for various versions available). The CGI pages will link to something like http://privoxy.org/$(VERSION)/user-manual/. This will need to be updated for each new release. There is no Makefile target for this at this time!!! It needs to be done manually. All developers should look at the ChangeLog and make sure noteworthy changes are referenced. Commit all files that were changed in the above steps! Tag all files in CVS with the version number with cvs tag v_X_Y_Z. Don't use vX_Y_Z, ver_X_Y_Z, v_X.Y.Z (won't work) etc. If the release was in a development branch, increase the point version from even to odd (X.Y.(Z+1)) again in configure.in and commit your change. On the webserver, copy the user manual to a new top-level directory called X.Y.Z. This ensures that help links from the CGI pages, which have the version as a prefix, will go into the right version of the manual. If this is a development branch release, also symlink X.Y.(Z-1) to X.Y.Z and X.Y.(Z+1) to . (i.e. dot). Building and Releasing the Packages Now the individual packages can be built and released. Note that for GPL reasons the first package to be released is always the source tarball. For all types of packages, including the source tarball, you must make sure that you build from clean sources by exporting the right version from CVS into an empty directory (just press return when asked for a password): mkdir dist # delete or choose different name if it already exists cd dist cvs -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa login cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa export -r v_X_Y_Z current Do NOT change a single bit, including, but not limited to version information after export from CVS. This is to make sure that all release packages, and with them, all future bug reports, are based on exactly the same code. Please find additional instructions for the source tarball and the individual platform dependent binary packages below. And details on the Sourceforge release process below that. Note on Privoxy Packaging Please keep these general guidelines in mind when putting together your package. These apply to all platforms! Privoxy requires write access to: all *.action files, all logfiles, and the trust file. You will need to determine the best way to do this for your platform. Please include up to date documentation. At a bare minimum: LICENSE (top-level directory) README (top-level directory) AUTHORS (top-level directory) man page (top-level directory, Unix-like platforms only) The User Manual (doc/webserver/user-manual/) FAQ (doc/webserver/faq/) Also suggested: Developer Manual (doc/webserver/developer-manual) and ChangeLog (top-level directory). FAQ and the manuals are HTML docs. There are also text versions in doc/text/ which could conceivably also be included. The documentation has been designed such that the manuals are linked to each other from parallel directories, and should be packaged that way. privoxy-index.html can also be included and can serve as a focal point for docs and other links of interest (and possibly renamed to index.html). This should be one level up from the manuals. There is a link also on this page to an HTMLized version of the man page. To avoid 404 for this, it is in CVS as doc/webserver/man-page/privoxy-man-page.html, and should be included along with the manuals. There is also a css stylesheets that can be included for better presentation: p_doc.css. This should be in the same directory with privoxy-index.html, (i.e. one level up from the manual directories). user.action is designed for local preferences. Make sure this does not get overwritten! Other configuration files should be installed as the new defaults, but all previously installed configuration files should be preserved as backups. This is just good manners :-) Please check platform specific notes in this doc, if you haven't done Privoxy packaging before for other platform specific issues. Conversely, please add any notes that you know are important for your platform (or contact one of the doc maintainers to do this if you can't). Packagers should do a clean install of their package after building it. So any previous installs should be removed first to ensure the integrity of the newly built package. Then run the package for a while to make sure there are no obvious problems, before uploading. Source Tarball First, make sure that you have freshly exported the right version into an empty directory. (See "Building and releasing packages" above). Then run: cd current autoheader && autoconf && ./configure Then do: make tarball-dist To upload the package to Sourceforge, simply issue make tarball-upload Go to the displayed URL and release the file publicly on Sourceforge. For the change log field, use the relevant section of the ChangeLog file. SuSE, Conectiva or Red Hat RPM In following text, replace dist with either rh for Red Hat or suse for SuSE. First, make sure that you have freshly exported the right version into an empty directory. (See "Building and releasing packages" above). As the only exception to not changing anything after export from CVS, now examine the file privoxy-dist.spec and make sure that the version information and the RPM release number are correct. The RPM release numbers for each version start at one. Hence it must be reset to one if this is the first RPM for dist which is built from version X.Y.Z. Check the file list if unsure. Else, it must be set to the highest already available RPM release number for that version plus one. Then run: cd current autoheader && autoconf && ./configure Then do make dist-dist To upload the package to Sourceforge, simply issue make dist-upload rpm_packagerev where rpm_packagerev is the RPM release number as determined above. Go to the displayed URL and release the file publicly on Sourceforge. Use the release notes and change log from the source tarball package. OS/2 First, make sure that you have freshly exported the right version into an empty directory. (See "Building and releasing packages" above). Then get the OS/2 Setup module: cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa co os2setup You will need a mix of development tools. The main compilation takes place with IBM Visual Age C++. Some ancillary work takes place with GNU tools, available from various sources like hobbes.nmsu.edu. Specificially, you will need autoheader, autoconf and sh tools. The packaging takes place with WarpIN, available from various sources, including its home page: xworkplace. Change directory to the os2setup directory. Edit the os2build.cmd file to set the final executable filename. For example, installExeName='privoxyos2_setup_X.Y.Z.exe' Next, edit the IJB.wis file so the release number matches in the PACKAGEID section: PACKAGEID="Privoxy Team\Privoxy\Privoxy Package\X\Y\Z" You're now ready to build. Run: os2build You will find the WarpIN-installable executable in the ./files directory. Upload this anonymously to uploads.sourceforge.net/incoming, create a release for it, and you're done. Use the release notes and Change Log from the source tarball package. Solaris Login to Sourceforge's compilefarm via ssh: ssh cf.sourceforge.net Choose the right operating system (not the Debian one). When logged in, make sure that you have freshly exported the right version into an empty directory. (See "Building and releasing packages" above). Then run: cd current autoheader && autoconf && ./configure Then run gmake solaris-dist which creates a gzip'ed tar archive. Sadly, you cannot use make solaris-upload on the Sourceforge machine (no ncftpput). You now have to manually upload the archive to Sourceforge's ftp server and release the file publicly. Use the release notes and Change Log from the source tarball package. Windows You should ensure you have the latest version of Cygwin (from http://www.cygwin.com/). Run the following commands from within a Cygwin bash shell. First, make sure that you have freshly exported the right version into an empty directory. (See "Building and releasing packages" above). Then get the Windows setup module: cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa co winsetup Then you can build the package. This is fully automated, and is controlled by winsetup/GNUmakefile. All you need to do is: cd winsetup make Now you can manually rename privoxy_setup.exe to privoxy_setup_X_Y_Z.exe, and upload it to SourceForge. When releasing the package on SourceForge, use the release notes and Change Log from the source tarball package. Debian First, make sure that you have freshly exported the right version into an empty directory. (See "Building and releasing packages" above). Then add a log entry to debian/changelog, if it is not already there, for example by running: debchange -v &p-version;-&p-status;-1 "New upstream version" Then, run: dpkg-buildpackage -rfakeroot -us -uc -b This will create ../privoxy_&p-version;-&p-status;-1_i386.deb which can be uploaded. To upload the package to Sourceforge, simply issue make debian-upload Mac OSX First, make sure that you have freshly exported the right version into an empty directory. (See "Building and releasing packages" above). Then get the Mac OSX setup module: cvs -z3 -d:pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa co osxsetup Then run: cd osxsetup build This will run autoheader, autoconf and configure as well as make. Finally, it will copy over the necessary files to the ./osxsetup/files directory for further processing by PackageMaker. Bring up PackageMaker with the PrivoxyPackage.pmsp definition file, modify the package name to match the release, and hit the "Create package" button. If you specify ./Privoxy.pkg as the output package name, you can then create the distributable zip file with the command: zip -r privoxyosx_setup_x.y.z.zip Privoxy.pkg You can then upload privoxyosx_setup_x.y.z.zip anonymously to uploads.sourceforge.net/incoming, create a release for it, and you're done. Use the release notes and Change Log from the source tarball package. FreeBSD Login to Sourceforge's compile-farm via ssh: ssh cf.sourceforge.net Choose the right operating system. When logged in, make sure that you have freshly exported the right version into an empty directory. (See "Building and releasing packages" above). Then run: cd current autoheader && autoconf && ./configure Then run: gmake freebsd-dist which creates a gzip'ed tar archive. Sadly, you cannot use make freebsd-upload on the Sourceforge machine (no ncftpput). You now have to manually upload the archive to Sourceforge's ftp server and release the file publicly. Use the release notes and Change Log from the source tarball package. HP-UX 11 First, make sure that you have freshly exported the right version into an empty directory. (See "Building and releasing packages" above). Then run: cd current autoheader && autoconf && ./configure Then do FIXME. Amiga OS First, make sure that you have freshly exported the right version into an empty directory. (See "Building and releasing packages" above). Then run: cd current autoheader && autoconf && ./configure Then do FIXME. AIX Login to Sourceforge's compilefarm via ssh: ssh cf.sourceforge.net Choose the right operating system. When logged in, make sure that you have freshly exported the right version into an empty directory. (See "Building and releasing packages" above). Then run: cd current autoheader && autoconf && ./configure Then run: make aix-dist which creates a gzip'ed tar archive. Sadly, you cannot use make aix-upload on the Sourceforge machine (no ncftpput). You now have to manually upload the archive to Sourceforge's ftp server and release the file publicly. Use the release notes and Change Log from the source tarball package. Uploading and Releasing Your Package After the package is ready, it is time to upload it to SourceForge, and go through the release steps. The upload is done via FTP: Upload to: ftp://upload.sourceforge.net/incoming user: anonymous password: ijbswa-developers@lists.sourceforge.net Or use the make targets as described above. Once this done go to http://sourceforge.net/project/admin/editpackages.php?group_id=11118, making sure you are logged in. Find your target platform in the second column, and click Add Release. You will then need to create a new release for your package, using the format of $VERSION ($CODE_STATUS), e.g. &p-version; (beta). Now just follow the prompts. Be sure to add any appropriate Release notes. You should see your freshly uploaded packages in Step 2. Add Files To This Release. Check the appropriate box(es). Remember at each step to hit the Refresh/Submit buttons! You should now see your file(s) listed in Step 3. Fill out the forms with the appropriate information for your platform, being sure to hit Update for each file. If anyone is monitoring your platform, check the email box at the very bottom to notify them of the new package. This should do it! If you have made errors, or need to make changes, you can go through essentially the same steps, but select Edit Release, instead of Add Release. After the Release When all (or: most of the) packages have been uploaded and made available, send an email to the announce mailing list, Subject: "Version X.Y.Z available for download". Be sure to include the download location, the release notes and the Changelog. Also, post an updated News item on the project page Sourceforge, and update the Home page and docs linked from the Home page (see below). Update the Webserver The webserver should be updated at least with each stable release. When updating, please follow these steps to make sure that no broken links, inconsistent contents or permission problems will occur (as it has many times in the past!): If you have changed anything in the stable-branch documentation source SGML files, do: make dok dok-pdf # (or 'make redhat-dok dok-pdf' if 'make dok' doesn't work for you) That will generate doc/webserver/user-manual, doc/webserver/developer-manual, doc/webserver/faq, doc/pdf/*.pdf and doc/webserver/index.html automatically. If you changed the manual page sources, generate doc/webserver/man-page/privoxy-man-page.html by running make man. (This is a separate target due to dependencies on some obscure perl scripts [now in CVS, but not well tested]. See comments in GNUmakefile.) If you want to add new files to the webserver, create them locally in the doc/webserver/* directory (or create new directories under doc/webserver). Next, commit any changes from the above steps to CVS. All set? If these are docs in the stable branch, then do: make webserver This will do the upload to the webserver (www.privoxy.org) and ensure all files and directories there are group writable. Please do NOT use any other means of transferring files to the webserver to avoid permission problems. Also, please do not upload docs from development branches or versions. The publicly posted docs should be in sync with the last official release. Contacting the developers, Bug Reporting and Feature Requests &contacting; Privoxy Copyright, License and History ©right; License &license; History &history; See also &seealso;