# Sample Configuration File for Privoxy 3.0.34 # # Copyright (C) 2001-2023 Privoxy Developers https://www.privoxy.org/ # ##################################################################### # # # Table of Contents # # # # I. INTRODUCTION # # II. FORMAT OF THE CONFIGURATION FILE # # # # 1. LOCAL SET-UP DOCUMENTATION # # 2. CONFIGURATION AND LOG FILE LOCATIONS # # 3. DEBUGGING # # 4. ACCESS CONTROL AND SECURITY # # 5. FORWARDING # # 6. MISCELLANEOUS # # 7. HTTPS INSPECTION # # 8. WINDOWS GUI OPTIONS # # # ##################################################################### # # # I. INTRODUCTION # =============== # # This file holds Privoxy's main configuration. Privoxy detects # configuration changes automatically, so you don't have to restart # it unless you want to load a different configuration file. # # The configuration will be reloaded with the first request after # the change was done, this request itself will still use the old # configuration, though. In other words: it takes two requests # before you see the result of your changes. Requests that are # dropped due to ACL don't trigger reloads. # # When starting Privoxy on Unix systems, give the location of this # file as last argument. On Windows systems, Privoxy will look for # this file with the name 'config.txt' in the current working # directory of the Privoxy process. # # # II. FORMAT OF THE CONFIGURATION FILE # ==================================== # # Configuration lines consist of an initial keyword followed by a # list of values, all separated by whitespace (any number of spaces # or tabs). For example, # # actionsfile default.action # # Indicates that the actionsfile is named 'default.action'. # # The '#' indicates a comment. Any part of a line following a '#' is # ignored, except if the '#' is preceded by a '\'. # # Thus, by placing a # at the start of an existing configuration # line, you can make it a comment and it will be treated as if it # weren't there. This is called "commenting out" an option and can # be useful. Removing the # again is called "uncommenting". # # Note that commenting out an option and leaving it at its default # are two completely different things! Most options behave very # differently when unset. See the "Effect if unset" explanation in # each option's description for details. # # Long lines can be continued on the next line by using a `\' as the # last character. # # # 1. LOCAL SET-UP DOCUMENTATION # ============================== # # If you intend to operate Privoxy for more users than just # yourself, it might be a good idea to let them know how to reach # you, what you block and why you do that, your policies, etc. # # # 1.1. user-manual # ================= # # Specifies: # # Location of the Privoxy User Manual. # # Type of value: # # A fully qualified URI # # Default value: # # Unset # # Effect if unset: # # https://www.privoxy.org/version/user-manual/ will be used, # where version is the Privoxy version. # # Notes: # # The User Manual URI is the single best source of information # on Privoxy, and is used for help links from some of the # internal CGI pages. The manual itself is normally packaged # with the binary distributions, so you probably want to set # this to a locally installed copy. # # Examples: # # The best all purpose solution is simply to put the full local # PATH to where the User Manual is located: # # user-manual /usr/share/doc/privoxy/user-manual # # The User Manual is then available to anyone with access to # Privoxy, by following the built-in URL: http:// # config.privoxy.org/user-manual/ (or the shortcut: http://p.p/ # user-manual/). # # If the documentation is not on the local system, it can be # accessed from a remote server, as: # # user-manual http://example.com/privoxy/user-manual/ # # WARNING!!! # # If set, this option should be the first option in the # config file, because it is used while the config file is # being read. # #user-manual https://www.privoxy.org/user-manual/ # # 1.2. trust-info-url # ==================== # # Specifies: # # A URL to be displayed in the error page that users will see if # access to an untrusted page is denied. # # Type of value: # # URL # # Default value: # # Unset # # Effect if unset: # # No links are displayed on the "untrusted" error page. # # Notes: # # The value of this option only matters if the trust mechanism # has been activated. (See trustfile below.) # # If you use the trust mechanism, it is a good idea to write up # some on-line documentation about your trust policy and to # specify the URL(s) here. Use multiple times for multiple URLs. # # The URL(s) should be added to the trustfile as well, so users # don't end up locked out from the information on why they were # locked out in the first place! # #trust-info-url http://www.example.com/why_we_block.html #trust-info-url http://www.example.com/what_we_allow.html # # 1.3. admin-address # =================== # # Specifies: # # An email address to reach the Privoxy administrator. # # Type of value: # # Email address # # Default value: # # Unset # # Effect if unset: # # No email address is displayed on error pages and the CGI user # interface. # # Notes: # # If both admin-address and proxy-info-url are unset, the whole # "Local Privoxy Support" box on all generated pages will not be # shown. # #admin-address privoxy-admin@example.com # # 1.4. proxy-info-url # ==================== # # Specifies: # # A URL to documentation about the local Privoxy setup, # configuration or policies. # # Type of value: # # URL # # Default value: # # Unset # # Effect if unset: # # No link to local documentation is displayed on error pages and # the CGI user interface. # # Notes: # # If both admin-address and proxy-info-url are unset, the whole # "Local Privoxy Support" box on all generated pages will not be # shown. # # This URL shouldn't be blocked ;-) # #proxy-info-url http://www.example.com/proxy-service.html # # 2. CONFIGURATION AND LOG FILE LOCATIONS # ======================================== # # Privoxy can (and normally does) use a number of other files for # additional configuration, help and logging. This section of the # configuration file tells Privoxy where to find those other files. # # The user running Privoxy, must have read permission for all # configuration files, and write permission to any files that would # be modified, such as log files and actions files. # # # 2.1. confdir # ============= # # Specifies: # # The directory where the other configuration files are located. # # Type of value: # # Path name # # Default value: # # /etc/privoxy (Unix) or Privoxy installation dir (Windows) # # Effect if unset: # # Mandatory # # Notes: # # No trailing "/", please. # confdir . # # 2.2. templdir # ============== # # Specifies: # # An alternative directory where the templates are loaded from. # # Type of value: # # Path name # # Default value: # # unset # # Effect if unset: # # The templates are assumed to be located in confdir/template. # # Notes: # # Privoxy's original templates are usually overwritten with each # update. Use this option to relocate customized templates that # should be kept. As template variables might change between # updates, you shouldn't expect templates to work with Privoxy # releases other than the one they were part of, though. # #templdir . # # 2.3. temporary-directory # ========================= # # Specifies: # # A directory where Privoxy can create temporary files. # # Type of value: # # Path name # # Default value: # # unset # # Effect if unset: # # No temporary files are created, external filters don't work. # # Notes: # # To execute external filters, Privoxy has to create temporary # files. This directive specifies the directory the temporary # files should be written to. # # It should be a directory only Privoxy (and trusted users) can # access. # #temporary-directory . # # 2.4. logdir # ============ # # Specifies: # # The directory where all logging takes place (i.e. where the # logfile is located). # # Type of value: # # Path name # # Default value: # # /var/log/privoxy (Unix) or Privoxy installation dir (Windows) # # Effect if unset: # # Mandatory # # Notes: # # No trailing "/", please. # logdir . # # 2.5. actionsfile # ================= # # Specifies: # # The actions file(s) to use # # Type of value: # # Complete file name, relative to confdir # # Default values: # # match-all.action # Actions that are applied to all sites and maybe overruled later on. # # default.action # Main actions file # # user.action # User customizations # # Effect if unset: # # No actions are taken at all. More or less neutral proxying. # # Notes: # # Multiple actionsfile lines are permitted, and are in fact # recommended! # # The default values are default.action, which is the "main" # actions file maintained by the developers, and user.action, # where you can make your personal additions. # # Actions files contain all the per site and per URL # configuration for ad blocking, cookie management, privacy # considerations, etc. # actionsfile match-all.action # Actions that are applied to all sites and maybe overruled later on. actionsfile default.action # Main actions file actionsfile user.action # User customizations #actionsfile regression-tests.action # Tests for privoxy-regression-test # # 2.6. filterfile # ================ # # Specifies: # # The filter file(s) to use # # Type of value: # # File name, relative to confdir # # Default value: # # default.filter (Unix) or default.filter.txt (Windows) # # Effect if unset: # # No textual content filtering takes place, i.e. all +filter{name} # actions in the actions files are turned neutral. # # Notes: # # Multiple filterfile lines are permitted. # # The filter files contain content modification rules that use # regular expressions. These rules permit powerful changes on # the content of Web pages, and optionally the headers as well, # e.g., you could try to disable your favorite JavaScript # annoyances, re-write the actual displayed text, or just have # some fun playing buzzword bingo with web pages. # # The +filter{name} actions rely on the relevant filter (name) # to be defined in a filter file! # # A pre-defined filter file called default.filter that contains # a number of useful filters for common problems is included in # the distribution. See the section on the filter action for a # list. # # It is recommended to place any locally adapted filters into a # separate file, such as user.filter. # filterfile default.filter filterfile user.filter # User customizations # # 2.7. logfile # ============= # # Specifies: # # The log file to use # # Type of value: # # File name, relative to logdir # # Default value: # # Unset (commented out). When activated: logfile (Unix) or # privoxy.log (Windows). # # Effect if unset: # # No logfile is written. # # Notes: # # The logfile is where all logging and error messages are # written. The level of detail and number of messages are set # with the debug option (see below). The logfile can be useful # for tracking down a problem with Privoxy (e.g., it's not # blocking an ad you think it should block) and it can help you # to monitor what your browser is doing. # # Depending on the debug options below, the logfile may be a # privacy risk if third parties can get access to it. As most # users will never look at it, Privoxy only logs fatal errors by # default. # # For most troubleshooting purposes, you will have to change # that, please refer to the debugging section for details. # # Any log files must be writable by whatever user Privoxy is # being run as (on Unix, default user id is "privoxy"). # # To prevent the logfile from growing indefinitely, it is # recommended to periodically rotate or shorten it. Many # operating systems support log rotation out of the box, some # require additional software to do it. For details, please # refer to the documentation for your operating system. # logfile logfile # # 2.8. trustfile # =============== # # Specifies: # # The name of the trust file to use # # Type of value: # # File name, relative to confdir # # Default value: # # Unset (commented out). When activated: trust (Unix) or # trust.txt (Windows) # # Effect if unset: # # The entire trust mechanism is disabled. # # Notes: # # The trust mechanism is an experimental feature for building # white-lists and should be used with care. It is NOT # recommended for the casual user. # # If you specify a trust file, Privoxy will only allow access to # sites that are specified in the trustfile. Sites can be listed # in one of two ways: # # Prepending a ~ character limits access to this site only (and # any sub-paths within this site), e.g. ~www.example.com allows # access to ~www.example.com/features/news.html, etc. # # Or, you can designate sites as trusted referrers, by # prepending the name with a + character. The effect is that # access to untrusted sites will be granted -- but only if a # link from this trusted referrer was used to get there. The # link target will then be added to the "trustfile" so that # future, direct accesses will be granted. Sites added via this # mechanism do not become trusted referrers themselves (i.e. # they are added with a ~ designation). There is a limit of 512 # such entries, after which new entries will not be made. # # If you use the + operator in the trust file, it may grow # considerably over time. # # It is recommended that Privoxy be compiled with the # --disable-force, --disable-toggle and --disable-editor # options, if this feature is to be used. # # Possible applications include limiting Internet access for # children. # #trustfile trust # # 3. DEBUGGING # ============= # # These options are mainly useful when tracing a problem. Note that # you might also want to invoke Privoxy with the --no-daemon command # line option when debugging. # # # 3.1. debug # =========== # # Specifies: # # Key values that determine what information gets logged. # # Type of value: # # Integer values # # Default value: # # 0 (i.e.: only fatal errors (that cause Privoxy to exit) are # logged) # # Effect if unset: # # Default value is used (see above). # # Notes: # # The available debug levels are: # # debug 1 # Log the destination for each request. See also debug 1024. # debug 2 # show each connection status # debug 4 # show tagging-related messages # debug 8 # show header parsing # debug 16 # log all data written to the network # debug 32 # debug force feature # debug 64 # debug regular expression filters # debug 128 # debug redirects # debug 256 # debug GIF de-animation # debug 512 # Common Log Format # debug 1024 # Log the destination for requests Privoxy didn't let through, and the reason why. # debug 2048 # CGI user interface # debug 4096 # Startup banner and warnings. # debug 8192 # Non-fatal errors # debug 32768 # log all data read from the network # debug 65536 # Log the applying actions # # To select multiple debug levels, you can either add them or # use multiple debug lines. # # A debug level of 1 is informative because it will show you # each request as it happens. 1, 1024, 4096 and 8192 are # recommended so that you will notice when things go wrong. The # other levels are probably only of interest if you are hunting # down a specific problem. They can produce a lot of output # (especially 16). # # If you are used to the more verbose settings, simply enable # the debug lines below again. # # If you want to use pure CLF (Common Log Format), you should # set "debug 512" ONLY and not enable anything else. # # Privoxy has a hard-coded limit for the length of log messages. # If it's reached, messages are logged truncated and marked with # "... [too long, truncated]". # # Please don't file any support requests without trying to # reproduce the problem with increased debug level first. Once # you read the log messages, you may even be able to solve the # problem on your own. # #debug 1 # Log the destination for each request. See also debug 1024. #debug 2 # show each connection status #debug 4 # show tagging-related messages #debug 8 # show header parsing #debug 128 # debug redirects #debug 256 # debug GIF de-animation #debug 512 # Common Log Format #debug 1024 # Log the destination for requests Privoxy didn't let through, and the reason why. #debug 4096 # Startup banner and warnings #debug 8192 # Non-fatal errors #debug 65536 # Log applying actions # # 3.2. single-threaded # ===================== # # Specifies: # # Whether to run only one server thread. # # Type of value: # # 1 or 0 # # Default value: # # 0 # # Effect if unset: # # Multi-threaded (or, where unavailable: forked) operation, i.e. # the ability to serve multiple requests simultaneously. # # Notes: # # This option is only there for debugging purposes. It will # drastically reduce performance. # #single-threaded 1 # # 3.3. hostname # ============== # # Specifies: # # The hostname shown on the CGI pages. # # Type of value: # # Text # # Default value: # # Unset # # Effect if unset: # # The hostname provided by the operating system is used. # # Notes: # # On some misconfigured systems resolving the hostname fails or # takes too much time and slows Privoxy down. Setting a fixed # hostname works around the problem. # # In other circumstances it might be desirable to show a # hostname other than the one returned by the operating system. # For example if the system has several different hostnames and # you don't want to use the first one. # # Note that Privoxy does not validate the specified hostname # value. # #hostname hostname.example.org # # 4. ACCESS CONTROL AND SECURITY # =============================== # # This section of the config file controls the security-relevant # aspects of Privoxy's configuration. # # # 4.1. listen-address # ==================== # # Specifies: # # The address and TCP port on which Privoxy will listen for # client requests. # # Type of value: # # [IP-Address]:Port # # [Hostname]:Port # # Default value: # # 127.0.0.1:8118 # # Effect if unset: # # Bind to 127.0.0.1 (IPv4 localhost), port 8118. This is # suitable and recommended for home users who run Privoxy on the # same machine as their browser. # # Notes: # # You will need to configure your browser(s) to this proxy # address and port. # # If you already have another service running on port 8118, or # if you want to serve requests from other machines (e.g. on # your local network) as well, you will need to override the # default. # # You can use this statement multiple times to make Privoxy # listen on more ports or more IP addresses. Suitable if your # operating system does not support sharing IPv6 and IPv4 # protocols on the same socket. # # If a hostname is used instead of an IP address, Privoxy will # try to resolve it to an IP address and if there are multiple, # use the first one returned. # # If the address for the hostname isn't already known on the # system (for example because it's in /etc/hostname), this may # result in DNS traffic. # # If the specified address isn't available on the system, or if # the hostname can't be resolved, Privoxy will fail to start. On # GNU/Linux, and other platforms that can listen on not yet # assigned IP addresses, Privoxy will start and will listen on # the specified address whenever the IP address is assigned to # the system # # IPv6 addresses containing colons have to be quoted by # brackets. They can only be used if Privoxy has been compiled # with IPv6 support. If you aren't sure if your version supports # it, have a look at http://config.privoxy.org/show-status. # # Some operating systems will prefer IPv6 to IPv4 addresses even # if the system has no IPv6 connectivity which is usually not # expected by the user. Some even rely on DNS to resolve # localhost which mean the "localhost" address used may not # actually be local. # # It is therefore recommended to explicitly configure the # intended IP address instead of relying on the operating # system, unless there's a strong reason not to. # # If you leave out the address, Privoxy will bind to all IPv4 # interfaces (addresses) on your machine and may become # reachable from the Internet and/or the local network. Be aware # that some GNU/Linux distributions modify that behaviour # without updating the documentation. Check for non-standard # patches if your Privoxy version behaves differently. # # If you configure Privoxy to be reachable from the network, # consider using access control lists (ACL's, see below), and/or # a firewall. # # If you open Privoxy to untrusted users, you should also make # sure that the following actions are disabled: # enable-edit-actions and enable-remote-toggle # # Example: # # Suppose you are running Privoxy on a machine which has the # address 192.168.0.1 on your local private network # (192.168.0.0) and has another outside connection with a # different address. You want it to serve requests from inside # only: # # listen-address 192.168.0.1:8118 # # Suppose you are running Privoxy on an IPv6-capable machine and # you want it to listen on the IPv6 address of the loopback # device: # # listen-address [::1]:8118 # listen-address 127.0.0.1:8118 # # 4.2. toggle # ============ # # Specifies: # # Initial state of "toggle" status # # Type of value: # # 1 or 0 # # Default value: # # 1 # # Effect if unset: # # Act as if toggled on # # Notes: # # If set to 0, Privoxy will start in "toggled off" mode, i.e. # mostly behave like a normal, content-neutral proxy with both # ad blocking and content filtering disabled. See # enable-remote-toggle below. # toggle 1 # # 4.3. enable-remote-toggle # ========================== # # Specifies: # # Whether or not the web-based toggle feature may be used # # Type of value: # # 0 or 1 # # Default value: # # 0 # # Effect if unset: # # The web-based toggle feature is disabled. # # Notes: # # When toggled off, Privoxy mostly acts like a normal, # content-neutral proxy, i.e. doesn't block ads or filter # content. # # Access to the toggle feature can not be controlled separately # by "ACLs" or HTTP authentication, so that everybody who can # access Privoxy (see "ACLs" and listen-address above) can # toggle it for all users. So this option is not recommended for # multi-user environments with untrusted users. # # Note that malicious client side code (e.g Java) is also # capable of using this option. # # As a lot of Privoxy users don't read documentation, this # feature is disabled by default. # # Note that you must have compiled Privoxy with support for this # feature, otherwise this option has no effect. # enable-remote-toggle 0 # # 4.4. enable-remote-http-toggle # =============================== # # Specifies: # # Whether or not Privoxy recognizes special HTTP headers to # change its behaviour. # # Type of value: # # 0 or 1 # # Default value: # # 0 # # Effect if unset: # # Privoxy ignores special HTTP headers. # # Notes: # # When toggled on, the client can change Privoxy's behaviour by # setting special HTTP headers. Currently the only supported # special header is "X-Filter: No", to disable filtering for the # ongoing request, even if it is enabled in one of the action # files. # # This feature is disabled by default. If you are using Privoxy # in a environment with trusted clients, you may enable this # feature at your discretion. Note that malicious client side # code (e.g Java) is also capable of using this feature. # # This option will be removed in future releases as it has been # obsoleted by the more general header taggers. # enable-remote-http-toggle 0 # # 4.5. enable-edit-actions # ========================= # # Specifies: # # Whether or not the web-based actions file editor may be used # # Type of value: # # 0 or 1 # # Default value: # # 0 # # Effect if unset: # # The web-based actions file editor is disabled. # # Notes: # # Access to the editor can not be controlled separately by # "ACLs" or HTTP authentication, so that everybody who can # access Privoxy (see "ACLs" and listen-address above) can # modify its configuration for all users. # # This option is not recommended for environments with untrusted # users and as a lot of Privoxy users don't read documentation, # this feature is disabled by default. # # Note that malicious client side code (e.g Java) is also # capable of using the actions editor and you shouldn't enable # this options unless you understand the consequences and are # sure your browser is configured correctly. # # Note that you must have compiled Privoxy with support for this # feature, otherwise this option has no effect. # enable-edit-actions 0 # # 4.6. enforce-blocks # ==================== # # Specifies: # # Whether the user is allowed to ignore blocks and can "go there # anyway". # # Type of value: # # 0 or 1 # # Default value: # # 0 # # Effect if unset: # # Blocks are not enforced. # # Notes: # # Privoxy is mainly used to block and filter requests as a # service to the user, for example to block ads and other junk # that clogs the pipes. Privoxy's configuration isn't perfect # and sometimes innocent pages are blocked. In this situation it # makes sense to allow the user to enforce the request and have # Privoxy ignore the block. # # In the default configuration Privoxy's "Blocked" page contains # a "go there anyway" link to adds a special string (the force # prefix) to the request URL. If that link is used, Privoxy will # detect the force prefix, remove it again and let the request # pass. # # Of course Privoxy can also be used to enforce a network # policy. In that case the user obviously should not be able to # bypass any blocks, and that's what the "enforce-blocks" option # is for. If it's enabled, Privoxy hides the "go there anyway" # link. If the user adds the force prefix by hand, it will not # be accepted and the circumvention attempt is logged. # # Example: # # enforce-blocks 1 # enforce-blocks 0 # # 4.7. ACLs: permit-access and deny-access # ========================================= # # Specifies: # # Who can access what. # # Type of value: # # src_addr[:port][/src_masklen] [dst_addr[:port][/dst_masklen]] # # Where src_addr and dst_addr are IPv4 addresses in dotted # decimal notation or valid DNS names, port is a port number, # and src_masklen and dst_masklen are subnet masks in CIDR # notation, i.e. integer values from 2 to 30 representing the # length (in bits) of the network address. The masks and the # whole destination part are optional. # # If your system implements RFC 3493, then src_addr and dst_addr # can be IPv6 addresses delimited by brackets, port can be a # number or a service name, and src_masklen and dst_masklen can # be a number from 0 to 128. # # Default value: # # Unset # # If no port is specified, any port will match. If no # src_masklen or src_masklen is given, the complete IP address # has to match (i.e. 32 bits for IPv4 and 128 bits for IPv6). # # Effect if unset: # # Don't restrict access further than implied by listen-address # # Notes: # # Access controls are included at the request of ISPs and # systems administrators, and are not usually needed by # individual users. For a typical home user, it will normally # suffice to ensure that Privoxy only listens on the localhost # (127.0.0.1) or internal (home) network address by means of the # listen-address option. # # Please see the warnings in the FAQ that Privoxy is not # intended to be a substitute for a firewall or to encourage # anyone to defer addressing basic security weaknesses. # # Multiple ACL lines are OK. If any ACLs are specified, Privoxy # only talks to IP addresses that match at least one # permit-access line and don't match any subsequent deny-access # line. In other words, the last match wins, with the default # being deny-access. # # If Privoxy is using a forwarder (see forward below) for a # particular destination URL, the dst_addr that is examined is # the address of the forwarder and NOT the address of the # ultimate target. This is necessary because it may be # impossible for the local Privoxy to determine the IP address # of the ultimate target (that's often what gateways are used # for). # # You should prefer using IP addresses over DNS names, because # the address lookups take time. All DNS names must resolve! You # can not use domain patterns like "*.org" or partial domain # names. If a DNS name resolves to multiple IP addresses, only # the first one is used. # # Some systems allow IPv4 clients to connect to IPv6 server # sockets. Then the client's IPv4 address will be translated by # the system into IPv6 address space with special prefix # ::ffff:0:0/96 (so called IPv4 mapped IPv6 address). Privoxy # can handle it and maps such ACL addresses automatically. # # Denying access to particular sites by ACL may have undesired # side effects if the site in question is hosted on a machine # which also hosts other sites (most sites are). # # Examples: # # Explicitly define the default behavior if no ACL and # listen-address are set: "localhost" is OK. The absence of a # dst_addr implies that all destination addresses are OK: # # permit-access localhost # # Allow any host on the same class C subnet as www.privoxy.org # access to nothing but www.example.com (or other domains hosted # on the same system): # # permit-access www.privoxy.org/24 www.example.com/32 # # Allow access from any host on the 26-bit subnet 192.168.45.64 # to anywhere, with the exception that 192.168.45.73 may not # access the IP address behind www.dirty-stuff.example.com: # # permit-access 192.168.45.64/26 # deny-access 192.168.45.73 www.dirty-stuff.example.com # # Allow access from the IPv4 network 192.0.2.0/24 even if # listening on an IPv6 wild card address (not supported on all # platforms): # # permit-access 192.0.2.0/24 # # This is equivalent to the following line even if listening on # an IPv4 address (not supported on all platforms): # # permit-access [::ffff:192.0.2.0]/120 # # # 4.8. buffer-limit # ================== # # Specifies: # # Maximum size of the buffer for content filtering. # # Type of value: # # Size in Kbytes # # Default value: # # 4096 # # Effect if unset: # # Use a 4MB (4096 KB) limit. # # Notes: # # For content filtering, i.e. the +filter and +deanimate-gif # actions, it is necessary that Privoxy buffers the entire # document body. This can be potentially dangerous, since a # server could just keep sending data indefinitely and wait for # your RAM to exhaust -- with nasty consequences. Hence this # option. # # When a document buffer size reaches the buffer-limit, it is # flushed to the client unfiltered and no further attempt to # filter the rest of the document is made. Remember that there # may be multiple threads running, which might require up to # buffer-limit Kbytes each, unless you have enabled # "single-threaded" above. # buffer-limit 4096 # # 4.9. enable-proxy-authentication-forwarding # ============================================ # # Specifies: # # Whether or not proxy authentication through Privoxy should # work. # # Type of value: # # 0 or 1 # # Default value: # # 0 # # Effect if unset: # # Proxy authentication headers are removed. # # Notes: # # Privoxy itself does not support proxy authentication, but can # allow clients to authenticate against Privoxy's parent proxy. # # By default Privoxy (3.0.21 and later) don't do that and remove # Proxy-Authorization headers in requests and Proxy-Authenticate # headers in responses to make it harder for malicious sites to # trick inexperienced users into providing login information. # # If this option is enabled the headers are forwarded. # # Enabling this option is not recommended if there is no parent # proxy that requires authentication or if the local network # between Privoxy and the parent proxy isn't trustworthy. If # proxy authentication is only required for some requests, it is # recommended to use a client header filter to remove the # authentication headers for requests where they aren't needed. # enable-proxy-authentication-forwarding 0 # # 4.10. trusted-cgi-referer # ========================== # # Specifies: # # A trusted website or webpage whose links can be followed to # reach sensitive CGI pages # # Type of value: # # URL or URL prefix # # Default value: # # Unset # # Effect if unset: # # No external pages are considered trusted referers. # # Notes: # # Before Privoxy accepts configuration changes through CGI pages # like client-tags or the remote toggle, it checks the Referer # header to see if the request comes from a trusted source. # # By default only the webinterface domains config.privoxy.org # and p.p are considered trustworthy. Requests originating from # other domains are rejected to prevent third-parties from # modifiying Privoxy's state by e.g. embedding images that # result in CGI requests. # # In some environments it may be desirable to embed links to CGI # pages on external pages, for example on an Intranet homepage # the Privoxy admin controls. # # The "trusted-cgi-referer" option can be used to add that page, # or the whole domain, as trusted source so the resulting # requests aren't rejected. Requests are accepted if the # specified trusted-cgi-refer is the prefix of the Referer. # # If the trusted source is supposed to access the CGI pages via # JavaScript the cors-allowed-origin option can be used. # # +-----------------------------------------------------+ # | Warning | # |-----------------------------------------------------| # |Declaring pages the admin doesn't control trustworthy| # |may allow malicious third parties to modify Privoxy's| # |internal state against the user's wishes and without | # |the user's knowledge. | # +-----------------------------------------------------+ # #trusted-cgi-referer http://www.example.org/local-privoxy-control-page # # 4.11. cors-allowed-origin # ========================== # # Specifies: # # A trusted website which can access Privoxy's CGI pages through # JavaScript. # # Type of value: # # URL # # Default value: # # Unset # # Effect if unset: # # No external sites get access via cross-origin resource # sharing. # # Notes: # # Modern browsers by default prevent cross-origin requests made # via JavaScript to Privoxy's CGI interface even if Privoxy # would trust the referer because it's white listed via the # trusted-cgi-referer directive. # # Cross-origin resource sharing (CORS) is a mechanism to allow # cross-origin requests. # # The "cors-allowed-origin" option can be used to specify a # domain that is allowed to make requests to Privoxy CGI # interface via JavaScript. It is used in combination with the # trusted-cgi-referer directive. # # +-----------------------------------------------------+ # | Warning | # |-----------------------------------------------------| # |Declaring domains the admin doesn't control | # |trustworthy may allow malicious third parties to | # |modify Privoxy's internal state against the user's | # |wishes and without the user's knowledge. | # +-----------------------------------------------------+ # #cors-allowed-origin http://www.example.org/ # # 5. FORWARDING # ============== # # This feature allows routing of HTTP requests through a chain of # multiple proxies. # # Forwarding can be used to chain Privoxy with a caching proxy to # speed up browsing. Using a parent proxy may also be necessary if # the machine that Privoxy runs on has no direct Internet access. # # Note that parent proxies can severely decrease your privacy level. # For example a parent proxy could add your IP address to the # request headers and if it's a caching proxy it may add the "Etag" # header to revalidation requests again, even though you configured # Privoxy to remove it. It may also ignore Privoxy's header time # randomization and use the original values which could be used by # the server as cookie replacement to track your steps between # visits. # # Also specified here are SOCKS proxies. Privoxy supports the SOCKS # 4 and SOCKS 4A protocols. # # # 5.1. forward # ============= # # Specifies: # # To which parent HTTP proxy specific requests should be routed. # # Type of value: # # target_pattern http_parent[:port] # # where target_pattern is a URL pattern that specifies to which # requests (i.e. URLs) this forward rule shall apply. Use / to # denote "all URLs". http_parent[:port] is the DNS name or IP # address of the parent HTTP proxy through which the requests # should be forwarded, optionally followed by its listening port # (default: 8000). Use a single dot (.) to denote "no # forwarding". # # Default value: # # Unset # # Effect if unset: # # Don't use parent HTTP proxies. # # Notes: # # If http_parent is ".", then requests are not forwarded to # another HTTP proxy but are made directly to the web servers. # # http_parent can be a numerical IPv6 address (if RFC 3493 is # implemented). To prevent clashes with the port delimiter, the # whole IP address has to be put into brackets. On the other # hand a target_pattern containing an IPv6 address has to be put # into angle brackets (normal brackets are reserved for regular # expressions already). # # Multiple lines are OK, they are checked in sequence, and the # last match wins. # # Examples: # # Everything goes to an example parent proxy, except SSL on port # 443 (which it doesn't handle): # # forward / parent-proxy.example.org:8080 # forward :443 . # # Everything goes to our example ISP's caching proxy, except for # requests to that ISP's sites: # # forward / caching-proxy.isp.example.net:8000 # forward .isp.example.net . # # Parent proxy specified by an IPv6 address: # # forward / [2001:DB8::1]:8000 # # Suppose your parent proxy doesn't support IPv6: # # forward / parent-proxy.example.org:8000 # forward ipv6-server.example.org . # forward <[2-3][0-9a-f][0-9a-f][0-9a-f]:*> . # # # 5.2. forward-socks4, forward-socks4a, forward-socks5 and forward-socks5t # ========================================================================= # # Specifies: # # Through which SOCKS proxy (and optionally to which parent HTTP # proxy) specific requests should be routed. # # Type of value: # # target_pattern [user:pass@]socks_proxy[:port] http_parent[:port] # # where target_pattern is a URL pattern that specifies to which # requests (i.e. URLs) this forward rule shall apply. Use / to # denote "all URLs". http_parent and socks_proxy are IP # addresses in dotted decimal notation or valid DNS names ( # http_parent may be "." to denote "no HTTP forwarding"), and # the optional port parameters are TCP ports, i.e. integer # values from 1 to 65535. user and pass can be used for SOCKS5 # authentication if required. # # Default value: # # Unset # # Effect if unset: # # Don't use SOCKS proxies. # # Notes: # # Multiple lines are OK, they are checked in sequence, and the # last match wins. # # The difference between forward-socks4 and forward-socks4a is # that in the SOCKS 4A protocol, the DNS resolution of the # target hostname happens on the SOCKS server, while in SOCKS 4 # it happens locally. # # With forward-socks5 the DNS resolution will happen on the # remote server as well. # # forward-socks5t works like vanilla forward-socks5 but lets # Privoxy additionally use Tor-specific SOCKS extensions. # Currently the only supported SOCKS extension is optimistic # data which can reduce the latency for the first request made # on a newly created connection. # # socks_proxy and http_parent can be a numerical IPv6 address # (if RFC 3493 is implemented). To prevent clashes with the port # delimiter, the whole IP address has to be put into brackets. # On the other hand a target_pattern containing an IPv6 address # has to be put into angle brackets (normal brackets are # reserved for regular expressions already). # # If http_parent is ".", then requests are not forwarded to # another HTTP proxy but are made (HTTP-wise) directly to the # web servers, albeit through a SOCKS proxy. # # Examples: # # From the company example.com, direct connections are made to # all "internal" domains, but everything outbound goes through # their ISP's proxy by way of example.com's corporate SOCKS 4A # gateway to the Internet. # # forward-socks4a / socks-gw.example.com:1080 www-cache.isp.example.net:8080 # forward .example.com . # # A rule that uses a SOCKS 4 gateway for all destinations but no # HTTP parent looks like this: # # forward-socks4 / socks-gw.example.com:1080 . # # To connect SOCKS5 proxy which requires username/password # authentication: # # forward-socks5 / user:pass@socks-gw.example.com:1080 . # # To chain Privoxy and Tor, both running on the same system, you # would use something like: # # forward-socks5t / 127.0.0.1:9050 . # # Note that if you got Tor through one of the bundles, you may # have to change the port from 9050 to 9150 (or even another # one). For details, please check the documentation on the Tor # website. # # The public Tor network can't be used to reach your local # network, if you need to access local servers you therefore # might want to make some exceptions: # # forward 192.168.*.*/ . # forward 10.*.*.*/ . # forward 127.*.*.*/ . # # Unencrypted connections to systems in these address ranges # will be as (un)secure as the local network is, but the # alternative is that you can't reach the local network through # Privoxy at all. Of course this may actually be desired and # there is no reason to make these exceptions if you aren't sure # you need them. # # If you also want to be able to reach servers in your local # network by using their names, you will need additional # exceptions that look like this: # # forward localhost/ . # # # 5.3. forwarded-connect-retries # =============================== # # Specifies: # # How often Privoxy retries if a forwarded connection request # fails. # # Type of value: # # Number of retries. # # Default value: # # 0 # # Effect if unset: # # Connections forwarded through other proxies are treated like # direct connections and no retry attempts are made. # # Notes: # # forwarded-connect-retries is mainly interesting for socks4a # connections, where Privoxy can't detect why the connections # failed. The connection might have failed because of a DNS # timeout in which case a retry makes sense, but it might also # have failed because the server doesn't exist or isn't # reachable. In this case the retry will just delay the # appearance of Privoxy's error message. # # Note that in the context of this option, "forwarded # connections" includes all connections that Privoxy forwards # through other proxies. This option is not limited to the HTTP # CONNECT method. # # Only use this option, if you are getting lots of # forwarding-related error messages that go away when you try # again manually. Start with a small value and check Privoxy's # logfile from time to time, to see how many retries are usually # needed. # # Example: # # forwarded-connect-retries 1 # forwarded-connect-retries 0 # # 6. MISCELLANEOUS # ================= # # 6.1. accept-intercepted-requests # ================================= # # Specifies: # # Whether intercepted requests should be treated as valid. # # Type of value: # # 0 or 1 # # Default value: # # 0 # # Effect if unset: # # Only proxy requests are accepted, intercepted requests are # treated as invalid. # # Notes: # # If you don't trust your clients and want to force them to use # Privoxy, enable this option and configure your packet filter # to redirect outgoing HTTP connections into Privoxy. # # Note that intercepting encrypted connections (HTTPS) isn't # supported. # # Make sure that Privoxy's own requests aren't redirected as # well. Additionally take care that Privoxy can't intentionally # connect to itself, otherwise you could run into redirection # loops if Privoxy's listening port is reachable by the outside # or an attacker has access to the pages you visit. # # If you are running Privoxy as intercepting proxy without being # able to intercept all client requests you may want to adjust # the CGI templates to make sure they don't reference content # from config.privoxy.org. # # Example: # # accept-intercepted-requests 1 # accept-intercepted-requests 0 # # 6.2. allow-cgi-request-crunching # ================================= # # Specifies: # # Whether requests to Privoxy's CGI pages can be blocked or # redirected. # # Type of value: # # 0 or 1 # # Default value: # # 0 # # Effect if unset: # # Privoxy ignores block and redirect actions for its CGI pages. # # Notes: # # By default Privoxy ignores block or redirect actions for its # CGI pages. Intercepting these requests can be useful in # multi-user setups to implement fine-grained access control, # but it can also render the complete web interface useless and # make debugging problems painful if done without care. # # Don't enable this option unless you're sure that you really # need it. # # Example: # # allow-cgi-request-crunching 1 # allow-cgi-request-crunching 0 # # 6.3. split-large-forms # ======================= # # Specifies: # # Whether the CGI interface should stay compatible with broken # HTTP clients. # # Type of value: # # 0 or 1 # # Default value: # # 0 # # Effect if unset: # # The CGI form generate long GET URLs. # # Notes: # # Privoxy's CGI forms can lead to rather long URLs. This isn't a # problem as far as the HTTP standard is concerned, but it can # confuse clients with arbitrary URL length limitations. # # Enabling split-large-forms causes Privoxy to divide big forms # into smaller ones to keep the URL length down. It makes # editing a lot less convenient and you can no longer submit all # changes at once, but at least it works around this browser # bug. # # If you don't notice any editing problems, there is no reason # to enable this option, but if one of the submit buttons # appears to be broken, you should give it a try. # # Example: # # split-large-forms 1 # split-large-forms 0 # # 6.4. keep-alive-timeout # ======================== # # Specifies: # # Number of seconds after which an open connection will no # longer be reused. # # Type of value: # # Time in seconds. # # Default value: # # None # # Effect if unset: # # Connections are not kept alive. # # Notes: # # This option allows clients to keep the connection to Privoxy # alive. If the server supports it, Privoxy will keep the # connection to the server alive as well. Under certain # circumstances this may result in speed-ups. # # By default, Privoxy will close the connection to the server if # the client connection gets closed, or if the specified timeout # has been reached without a new request coming in. This # behaviour can be changed with the connection-sharing option. # # This option has no effect if Privoxy has been compiled without # keep-alive support. # # Note that a timeout of five seconds as used in the default # configuration file significantly decreases the number of # connections that will be reused. The value is used because # some browsers limit the number of connections they open to a # single host and apply the same limit to proxies. This can # result in a single website "grabbing" all the connections the # browser allows, which means connections to other websites # can't be opened until the connections currently in use time # out. # # Several users have reported this as a Privoxy bug, so the # default value has been reduced. Consider increasing it to 300 # seconds or even more if you think your browser can handle it. # If your browser appears to be hanging, it probably can't. # # Example: # # keep-alive-timeout 300 # keep-alive-timeout 5 # # 6.5. tolerate-pipelining # ========================= # # Specifies: # # Whether or not pipelined requests should be served. # # Type of value: # # 0 or 1. # # Default value: # # None # # Effect if unset: # # If Privoxy receives more than one request at once, it # terminates the client connection after serving the first one. # # Notes: # # Privoxy currently doesn't pipeline outgoing requests, thus # allowing pipelining on the client connection is not guaranteed # to improve the performance. # # By default Privoxy tries to discourage clients from pipelining # by discarding aggressively pipelined requests, which forces # the client to resend them through a new connection. # # This option lets Privoxy tolerate pipelining. Whether or not # that improves performance mainly depends on the client # configuration. # # If you are seeing problems with pages not properly loading, # disabling this option could work around the problem. # # Example: # # tolerate-pipelining 1 # tolerate-pipelining 1 # # 6.6. default-server-timeout # ============================ # # Specifies: # # Assumed server-side keep-alive timeout if not specified by the # server. # # Type of value: # # Time in seconds. # # Default value: # # None # # Effect if unset: # # Connections for which the server didn't specify the keep-alive # timeout are not reused. # # Notes: # # Enabling this option significantly increases the number of # connections that are reused, provided the keep-alive-timeout # option is also enabled. # # While it also increases the number of connections problems # when Privoxy tries to reuse a connection that already has been # closed on the server side, or is closed while Privoxy is # trying to reuse it, this should only be a problem if it # happens for the first request sent by the client. If it # happens for requests on reused client connections, Privoxy # will simply close the connection and the client is supposed to # retry the request without bothering the user. # # Enabling this option is therefore only recommended if the # connection-sharing option is disabled. # # It is an error to specify a value larger than the # keep-alive-timeout value. # # This option has no effect if Privoxy has been compiled without # keep-alive support. # # Example: # # default-server-timeout 60 # #default-server-timeout 5 # # 6.7. connection-sharing # ======================== # # Specifies: # # Whether or not outgoing connections that have been kept alive # should be shared between different incoming connections. # # Type of value: # # 0 or 1 # # Default value: # # None # # Effect if unset: # # Connections are not shared. # # Notes: # # This option has no effect if Privoxy has been compiled without # keep-alive support, or if it's disabled. # # Notes: # # Note that reusing connections doesn't necessary cause # speedups. There are also a few privacy implications you should # be aware of. # # If this option is enabled, outgoing connections are shared # between clients (if there are more than one) and closing the # browser that initiated the outgoing connection does not affect # the connection between Privoxy and the server unless the # client's request hasn't been completed yet. # # If the outgoing connection is idle, it will not be closed # until either Privoxy's or the server's timeout is reached. # While it's open, the server knows that the system running # Privoxy is still there. # # If there are more than one client (maybe even belonging to # multiple users), they will be able to reuse each others # connections. This is potentially dangerous in case of # authentication schemes like NTLM where only the connection is # authenticated, instead of requiring authentication for each # request. # # If there is only a single client, and if said client can keep # connections alive on its own, enabling this option has next to # no effect. If the client doesn't support connection # keep-alive, enabling this option may make sense as it allows # Privoxy to keep outgoing connections alive even if the client # itself doesn't support it. # # You should also be aware that enabling this option increases # the likelihood of getting the "No server or forwarder data" # error message, especially if you are using a slow connection # to the Internet. # # This option should only be used by experienced users who # understand the risks and can weight them against the benefits. # # Example: # # connection-sharing 1 # #connection-sharing 1 # # 6.8. socket-timeout # ==================== # # Specifies: # # Number of seconds after which a socket times out if no data is # received. # # Type of value: # # Time in seconds. # # Default value: # # None # # Effect if unset: # # A default value of 300 seconds is used. # # Notes: # # The default is quite high and you probably want to reduce it. # If you aren't using an occasionally slow proxy like Tor, # reducing it to a few seconds should be fine. # # +-----------------------------------------------------+ # | Warning | # |-----------------------------------------------------| # |When a TLS library is being used to read or write | # |data from a socket with https-inspection enabled the | # |socket-timeout currently isn't applied and the | # |timeout used depends on the library (which may not | # |even use a timeout). | # +-----------------------------------------------------+ # Example: # # socket-timeout 300 # socket-timeout 300 # # 6.9. max-client-connections # ============================ # # Specifies: # # Maximum number of client connections that will be served. # # Type of value: # # Positive number. # # Default value: # # 128 # # Notes: # # Connections are served until a resource limit is reached. # # Privoxy creates one thread (or process) for every incoming # client connection that isn't rejected based on the access # control settings. # # If the system is powerful enough, Privoxy can theoretically # deal with several hundred (or thousand) connections at the # same time, but some operating systems enforce resource limits # by shutting down offending processes and their default limits # may be below the ones Privoxy would require under heavy load. # # Configuring Privoxy to enforce a connection limit below the # thread or process limit used by the operating system makes # sure this doesn't happen. Simply increasing the operating # system's limit would work too, but if Privoxy isn't the only # application running on the system, you may actually want to # limit the resources used by Privoxy. # # If Privoxy is only used by a single trusted user, limiting the # number of client connections is probably unnecessary. If there # are multiple possibly untrusted users you probably still want # to additionally use a packet filter to limit the maximal # number of incoming connections per client. Otherwise a # malicious user could intentionally create a high number of # connections to prevent other users from using Privoxy. # # Obviously using this option only makes sense if you choose a # limit below the one enforced by the operating system. # # One most POSIX-compliant systems Privoxy can't properly deal # with more than FD_SETSIZE file descriptors if Privoxy has been # configured to use select() and has to reject connections if # the limit is reached. When using select() this limit therefore # can't be increased without recompiling Privoxy with a # different FD_SETSIZE limit unless Privoxy is running on # Windows with _WIN32 defined. # # When Privoxy has been configured to use poll() the FD_SETSIZE # limit does not apply. # # Example: # # max-client-connections 256 # #max-client-connections 256 # # 6.10. listen-backlog # ===================== # # Specifies: # # Connection queue length requested from the operating system. # # Type of value: # # Number. # # Default value: # # 128 # # Effect if unset: # # A connection queue length of 128 is requested from the # operating system. # # Notes: # # Under high load incoming connection may queue up before # Privoxy gets around to serve them. The queue length is limited # by the operating system. Once the queue is full, additional # connections are dropped before Privoxy can accept and serve # them. # # Increasing the queue length allows Privoxy to accept more # incoming connections that arrive roughly at the same time. # # Note that Privoxy can only request a certain queue length, # whether or not the requested length is actually used depends # on the operating system which may use a different length # instead. # # On many operating systems a limit of -1 can be specified to # instruct the operating system to use the maximum queue length # allowed. Check the listen man page to see if your platform # allows this. # # On some platforms you can use "netstat -Lan -p tcp" to see the # effective queue length. # # Effectively using a value above 128 usually requires changing # the system configuration as well. On FreeBSD-based system the # limit is controlled by the kern.ipc.soacceptqueue sysctl. # # Example: # # listen-backlog 4096 # #listen-backlog -1 # # 6.11. enable-accept-filter # =========================== # # Specifies: # # Whether or not Privoxy should use an accept filter # # Type of value: # # 0 or 1 # # Default value: # # 0 # # Effect if unset: # # No accept filter is enabled. # # Notes: # # Accept filters reduce the number of context switches by not # passing sockets for new connections to Privoxy until a # complete HTTP request is available. # # As a result, Privoxy can process the whole request right away # without having to wait for additional data first. # # For this option to work, Privoxy has to be compiled with # FEATURE_ACCEPT_FILTER and the operating system has to support # it (which may require loading a kernel module). # # Currently accept filters are only supported on FreeBSD-based # systems. Check the accf_http(9) man page to learn how to # enable the support in the operating system. # # Example: # # enable-accept-filter 1 # #enable-accept-filter 1 # # 6.12. handle-as-empty-doc-returns-ok # ===================================== # # Specifies: # # The status code Privoxy returns for pages blocked with # +handle-as-empty-document. # # Type of value: # # 0 or 1 # # Default value: # # 0 # # Effect if unset: # # Privoxy returns a status 403(forbidden) for all blocked pages. # # Effect if set: # # Privoxy returns a status 200(OK) for pages blocked with # +handle-as-empty-document and a status 403(Forbidden) for all # other blocked pages. # # Notes: # # This directive was added as a work-around for Firefox bug # 492459: "Websites are no longer rendered if SSL requests for # JavaScripts are blocked by a proxy." # (https://bugzilla.mozilla.org/show_bug.cgi?id=492459), the bug # has been fixed for quite some time, but this directive is also # useful to make it harder for websites to detect whether or not # resources are being blocked. # #handle-as-empty-doc-returns-ok 1 # # 6.13. enable-compression # ========================= # # Specifies: # # Whether or not buffered content is compressed before delivery. # # Type of value: # # 0 or 1 # # Default value: # # 0 # # Effect if unset: # # Privoxy does not compress buffered content. # # Effect if set: # # Privoxy compresses buffered content before delivering it to # the client, provided the client supports it. # # Notes: # # This directive is only supported if Privoxy has been compiled # with FEATURE_COMPRESSION, which should not to be confused with # FEATURE_ZLIB. # # Compressing buffered content is mainly useful if Privoxy and # the client are running on different systems. If they are # running on the same system, enabling compression is likely to # slow things down. If you didn't measure otherwise, you should # assume that it does and keep this option disabled. # # Privoxy will not compress buffered content below a certain # length. # #enable-compression 1 # # 6.14. compression-level # ======================== # # Specifies: # # The compression level that is passed to the zlib library when # compressing buffered content. # # Type of value: # # Positive number ranging from 0 to 9. # # Default value: # # 1 # # Notes: # # Compressing the data more takes usually longer than # compressing it less or not compressing it at all. Which level # is best depends on the connection between Privoxy and the # client. If you can't be bothered to benchmark it for yourself, # you should stick with the default and keep compression # disabled. # # If compression is disabled, the compression level is # irrelevant. # # Examples: # # # Best speed (compared to the other levels) # compression-level 1 # # # Best compression # compression-level 9 # # # No compression. Only useful for testing as the added header # # slightly increases the amount of data that has to be sent. # # If your benchmark shows that using this compression level # # is superior to using no compression at all, the benchmark # # is likely to be flawed. # compression-level 0 # #compression-level 1 # # 6.15. client-header-order # ========================== # # Specifies: # # The order in which client headers are sorted before forwarding # them. # # Type of value: # # Client header names delimited by spaces or tabs # # Default value: # # None # # Notes: # # By default Privoxy leaves the client headers in the order they # were sent by the client. Headers are modified in-place, new # headers are added at the end of the already existing headers. # # The header order can be used to fingerprint client requests # independently of other headers like the User-Agent. # # This directive allows to sort the headers differently to # better mimic a different User-Agent. Client headers will be # emitted in the order given, headers whose name isn't # explicitly specified are added at the end. # # Note that sorting headers in an uncommon way will make # fingerprinting actually easier. Encrypted headers are not # affected by this directive unless https-inspection is enabled. # #client-header-order Host \ # User-Agent \ # Accept \ # Accept-Language \ # Accept-Encoding \ # Proxy-Connection \ # Referer \ # Cookie \ # DNT \ # Connection \ # Pragma \ # Upgrade-Insecure-Requests \ # If-Modified-Since \ # Cache-Control \ # Content-Length \ # Origin \ # Content-Type # # 6.16. client-specific-tag # ========================== # # Specifies: # # The name of a tag that will always be set for clients that # requested it through the webinterface. # # Type of value: # # Tag name followed by a description that will be shown in the # webinterface # # Default value: # # None # # Notes: # # Client-specific tags allow Privoxy admins to create different # profiles and let the users chose which one they want without # impacting other users. # # One use case is allowing users to circumvent certain blocks # without having to allow them to circumvent all blocks. This is # not possible with the enable-remote-toggle feature because it # would bluntly disable all blocks for all users and also affect # other actions like filters. It also is set globally which # renders it useless in most multi-user setups. # # After a client-specific tag has been defined with the # client-specific-tag directive, action sections can be # activated based on the tag by using a CLIENT-TAG pattern. The # CLIENT-TAG pattern is evaluated at the same priority as URL # patterns, as a result the last matching pattern wins. Tags # that are created based on client or server headers are # evaluated later on and can overrule CLIENT-TAG and URL # patterns! # # The tag is set for all requests that come from clients that # requested it to be set. Note that "clients" are differentiated # by IP address, if the IP address changes the tag has to be # requested again. # # Clients can request tags to be set by using the CGI interface # http://config.privoxy.org/client-tags. The specific tag # description is only used on the web page and should be phrased # in away that the user understands the effect of the tag. # # Examples: # # # Define a couple of tags, the described effect requires action sections # # that are enabled based on CLIENT-TAG patterns. # client-specific-tag circumvent-blocks Overrule blocks but do not affect other actions # client-specific-tag disable-content-filters Disable content-filters but do not affect other actions # client-specific-tag overrule-redirects Overrule redirect sections # client-specific-tag allow-cookies Do not crunch cookies in either direction # client-specific-tag change-tor-socks-port Change forward-socks5 settings to use a different Tor socks port (and circuits) # client-specific-tag no-https-inspection Disable HTTPS inspection # client-specific-tag no-tls-verification Don't verify certificates when http-inspection is enabled # # # 6.17. client-tag-lifetime # ========================== # # Specifies: # # How long a temporarily enabled tag remains enabled. # # Type of value: # # Time in seconds. # # Default value: # # 60 # # Notes: # # In case of some tags users may not want to enable them # permanently, but only for a short amount of time, for example # to circumvent a block that is the result of an overly-broad # URL pattern. # # The CGI interface http://config.privoxy.org/client-tags # therefore provides a "enable this tag temporarily" option. If # it is used, the tag will be set until the client-tag-lifetime # is over. # # Example: # # # Increase the time to life for temporarily enabled tags to 3 minutes # client-tag-lifetime 180 # # # 6.18. trust-x-forwarded-for # ============================ # # Specifies: # # Whether or not Privoxy should use IP addresses specified with # the X-Forwarded-For header # # Type of value: # # 0 or one # # Default value: # # 0 # # Notes: # # If clients reach Privoxy through another proxy, for example a # load balancer, Privoxy can't tell the client's IP address from # the connection. If multiple clients use the same proxy, they # will share the same client tag settings which is usually not # desired. # # This option lets Privoxy use the X-Forwarded-For header value # as client IP address. If the proxy sets the header, multiple # clients using the same proxy do not share the same client tag # settings. # # This option should only be enabled if Privoxy can only be # reached through a proxy and if the proxy can be trusted to set # the header correctly. It is recommended that ACL are used to # make sure only trusted systems can reach Privoxy. # # If access to Privoxy isn't limited to trusted systems, this # option would allow malicious clients to change the client tags # for other clients or increase Privoxy's memory requirements by # registering lots of client tag settings for clients that don't # exist. # # Example: # # # Allow systems that can reach Privoxy to provide the client # # IP address with a X-Forwarded-For header. # trust-x-forwarded-for 1 # # # 6.19. receive-buffer-size # ========================== # # Specifies: # # The size of the buffer Privoxy uses to receive data from the # server. # # Type of value: # # Size in bytes # # Default value: # # 5000 # # Notes: # # Increasing the receive-buffer-size increases Privoxy's memory # usage but can lower the number of context switches and thereby # reduce the cpu usage and potentially increase the throughput. # # This is mostly relevant for fast network connections and large # downloads that don't require filtering. # # Reducing the buffer size reduces the amount of memory Privoxy # needs to handle the request but increases the number of # systemcalls and may reduce the throughput. # # A dtrace command like: "sudo dtrace -n 'syscall::read:return / # execname == "privoxy"/ { @[execname] = llquantize(arg0, 10, 0, # 5, 20); @m = max(arg0)}'" can be used to properly tune the # receive-buffer-size. On systems without dtrace, strace or # truss may be used as less convenient alternatives. # # If the buffer is too large it will increase Privoxy's memory # footprint without any benefit. As the memory is (currently) # cleared before using it, a buffer that is too large can # actually reduce the throughput. # # Example: # # # Increase the receive buffer size # receive-buffer-size 32768 # # # 7. HTTPS INSPECTION # ==================== # # HTTPS inspection allows to filter encrypted requests and # responses. This is only supported when Privoxy has been built with # FEATURE_HTTPS_INSPECTION. If you aren't sure if your version # supports it, have a look at http://config.privoxy.org/show-status. # # # 7.1. ca-directory # ================== # # Specifies: # # Directory with the CA key, the CA certificate and the trusted # CAs file. # # Type of value: # # Text # # Default value: # # ./CA # # Effect if unset: # # Default value is used. # # Notes: # # This directive specifies the directory where the CA key, the # CA certificate and the trusted CAs file are located. # # The permissions should only let Privoxy and the Privoxy admin # access the directory. # # Example: # # ca-directory /usr/local/etc/privoxy/CA # #ca-directory /usr/local/etc/privoxy/CA # # 7.2. ca-cert-file # ================== # # Specifies: # # The CA certificate file in ".crt" format. # # Type of value: # # Text # # Default value: # # cacert.crt # # Effect if unset: # # Default value is used. # # Notes: # # This directive specifies the name of the CA certificate file # in ".crt" format. # # The file is used by Privoxy to generate website certificates # when https inspection is enabled with the https-inspection # action. # # Privoxy clients should import the certificate so that they can # validate the generated certificates. # # The file can be generated with: openssl req -new -x509 # -extensions v3_ca -keyout cakey.pem -out cacert.crt -days 3650 # # Example: # # ca-cert-file root.crt # #ca-cert-file cacert.crt # # 7.3. ca-key-file # ================= # # Specifies: # # The CA key file in ".pem" format. # # Type of value: # # Text # # Default value: # # cacert.pem # # Effect if unset: # # Default value is used. # # Notes: # # This directive specifies the name of the CA key file in ".pem" # format. The ca-cert-file section contains a command to # generate it. # # The CA key is used by Privoxy to sign generated certificates. # # Access to the key should be limited to Privoxy. # # Example: # # ca-key-file cakey.pem # #ca-key-file cakey.pem # # 7.4. ca-password # ================= # # Specifies: # # The password for the CA keyfile. # # Type of value: # # Text # # Default value: # # Empty string # # Effect if unset: # # Default value is used. # # Notes: # # This directive specifies the password for the CA keyfile that # is used when Privoxy generates certificates for intercepted # requests. # # +-----------------------------------------------------+ # | Warning | # |-----------------------------------------------------| # |Note that the password is shown on the CGI page so | # |don't reuse an important one. | # | | # |If disclosure of the password is a compliance issue | # |consider blocking the relevant CGI requests after | # |enabling the enforce-blocks and | # |allow-cgi-request-crunching. | # +-----------------------------------------------------+ # Example: # # ca-password blafasel # #ca-password swordfish # # 7.5. certificate-directory # =========================== # # Specifies: # # Directory to save generated keys and certificates. # # Type of value: # # Text # # Default value: # # ./certs # # Effect if unset: # # Default value is used. # # Notes: # # This directive specifies the directory where generated TLS/SSL # keys and certificates are saved when https inspection is # enabled with the https-inspection action. # # The keys and certificates currently have to be deleted # manually when changing the ca-cert-file and the ca-cert-key. # # The permissions should only let Privoxy and the Privoxy admin # access the directory. # # +-----------------------------------------------------+ # | Warning | # |-----------------------------------------------------| # |Privoxy currently does not garbage-collect obsolete | # |keys and certificates and does not keep track of how | # |may keys and certificates exist. | # | | # |Privoxy admins should monitor the size of the | # |directory and/or make sure there is sufficient space | # |available. A cron job to limit the number of keys and| # |certificates to a certain number may be worth | # |considering. | # +-----------------------------------------------------+ # Example: # # certificate-directory /usr/local/var/privoxy/certs # #certificate-directory /usr/local/var/privoxy/certs # # 7.6. cipher-list # ================= # # Specifies: # # A list of ciphers to use in TLS handshakes # # Type of value: # # Text # # Default value: # # None # # Effect if unset: # # A default value is inherited from the TLS library. # # Notes: # # This directive allows to specify a non-default list of ciphers # to use in TLS handshakes with clients and servers. # # Ciphers are separated by colons. Which ciphers are supported # depends on the TLS library. When using OpenSSL, unsupported # ciphers are skipped. When using MbedTLS they are rejected. # # +-----------------------------------------------------+ # | Warning | # |-----------------------------------------------------| # |Specifying an unusual cipher list makes | # |fingerprinting easier. Note that the default list | # |provided by the TLS library may be unusual when | # |compared to the one used by modern browsers as well. | # +-----------------------------------------------------+ # Examples: # # # Explicitly set a couple of ciphers with names used by MbedTLS # cipher-list cipher-list TLS-ECDHE-RSA-WITH-CHACHA20-POLY1305-SHA256:\ # TLS-ECDHE-ECDSA-WITH-CHACHA20-POLY1305-SHA256:\ # TLS-DHE-RSA-WITH-CHACHA20-POLY1305-SHA256:\ # TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256:\ # TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384:\ # TLS-ECDHE-ECDSA-WITH-AES-256-CCM:\ # TLS-ECDHE-ECDSA-WITH-AES-256-CCM-8:\ # TLS-ECDHE-ECDSA-WITH-AES-128-CCM:\ # TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8:\ # TLS-ECDHE-ECDSA-WITH-CAMELLIA-128-GCM-SHA256:\ # TLS-ECDHE-ECDSA-WITH-CAMELLIA-256-GCM-SHA384:\ # TLS-ECDHE-RSA-WITH-AES-128-GCM-SHA256:\ # TLS-ECDHE-RSA-WITH-AES-256-GCM-SHA384:\ # TLS-ECDHE-RSA-WITH-CAMELLIA-128-GCM-SHA256:\ # TLS-ECDHE-RSA-WITH-CAMELLIA-256-GCM-SHA384:\ # TLS-DHE-RSA-WITH-AES-256-GCM-SHA384:\ # TLS-DHE-RSA-WITH-AES-128-GCM-SHA256:\ # TLS-DHE-RSA-WITH-AES-256-CCM:\ # TLS-DHE-RSA-WITH-AES-256-CCM-8:\ # TLS-DHE-RSA-WITH-AES-128-CCM:\ # TLS-DHE-RSA-WITH-AES-128-CCM-8:\ # TLS-DHE-RSA-WITH-CAMELLIA-128-GCM-SHA256:\ # TLS-DHE-RSA-WITH-CAMELLIA-256-GCM-SHA384:\ # TLS-ECDH-RSA-WITH-AES-128-GCM-SHA256:\ # TLS-ECDH-RSA-WITH-AES-256-GCM-SHA384:\ # TLS-ECDH-RSA-WITH-CAMELLIA-128-GCM-SHA256:\ # TLS-ECDH-RSA-WITH-CAMELLIA-256-GCM-SHA384:\ # TLS-ECDH-ECDSA-WITH-AES-128-GCM-SHA256:\ # TLS-ECDH-ECDSA-WITH-AES-256-GCM-SHA384:\ # TLS-ECDH-ECDSA-WITH-CAMELLIA-128-GCM-SHA256:\ # TLS-ECDH-ECDSA-WITH-CAMELLIA-256-GCM-SHA384 # # # Explicitly set a couple of ciphers with names used by OpenSSL # cipher-list ECDHE-RSA-AES256-GCM-SHA384:\ # ECDHE-ECDSA-AES256-GCM-SHA384:\ # DH-DSS-AES256-GCM-SHA384:\ # DHE-DSS-AES256-GCM-SHA384:\ # DH-RSA-AES256-GCM-SHA384:\ # DHE-RSA-AES256-GCM-SHA384:\ # ECDH-RSA-AES256-GCM-SHA384:\ # ECDH-ECDSA-AES256-GCM-SHA384:\ # ECDHE-RSA-AES128-GCM-SHA256:\ # ECDHE-ECDSA-AES128-GCM-SHA256:\ # DH-DSS-AES128-GCM-SHA256:\ # DHE-DSS-AES128-GCM-SHA256:\ # DH-RSA-AES128-GCM-SHA256:\ # DHE-RSA-AES128-GCM-SHA256:\ # ECDH-RSA-AES128-GCM-SHA256:\ # ECDH-ECDSA-AES128-GCM-SHA256:\ # ECDHE-RSA-AES256-GCM-SHA384:\ # AES128-SHA # # # Use keywords instead of explicitly naming the ciphers (Does not work with MbedTLS) # cipher-list ALL:!EXPORT:!EXPORT40:!EXPORT56:!aNULL:!LOW:!RC4:@STRENGTH # # # 7.7. trusted-cas-file # ====================== # # Specifies: # # The trusted CAs file in ".pem" format. # # Type of value: # # File name relative to ca-directory # # Default value: # # trustedCAs.pem # # Effect if unset: # # Default value is used. # # Notes: # # This directive specifies the trusted CAs file that is used # when validating certificates for intercepted TLS/SSL requests. # # An example file can be downloaded from https://curl.se/ca/cacert.pem. # If you want to create the file yourself, please # see: https://curl.se/docs/caextract.html. # # Example: # # trusted-cas-file trusted_cas_file.pem # #trusted-cas-file trustedCAs.pem # # 8. WINDOWS GUI OPTIONS # ======================= # # Privoxy has a number of options specific to the Windows GUI # interface: # # # If "activity-animation" is set to 1, the Privoxy icon will animate # when "Privoxy" is active. To turn off, set to 0. # #activity-animation 1 # # If "log-messages" is set to 1, Privoxy copies log messages to the # console window. The log detail depends on the debug directive. # #log-messages 1 # # If "log-buffer-size" is set to 1, the size of the log buffer, i.e. # the amount of memory used for the log messages displayed in the # console window, will be limited to "log-max-lines" (see below). # # Warning: Setting this to 0 will result in the buffer to grow # infinitely and eat up all your memory! # #log-buffer-size 1 # # log-max-lines is the maximum number of lines held in the log # buffer. See above. # #log-max-lines 200 # # If "log-highlight-messages" is set to 1, Privoxy will highlight # portions of the log messages with a bold-faced font: # #log-highlight-messages 1 # # The font used in the console window: # #log-font-name Comic Sans MS # # Font size used in the console window: # #log-font-size 8 # # "show-on-task-bar" controls whether or not Privoxy will appear as # a button on the Task bar when minimized: # #show-on-task-bar 0 # # If "close-button-minimizes" is set to 1, the Windows close button # will minimize Privoxy instead of closing the program (close with # the exit option on the File menu). # #close-button-minimizes 1 # # The "hide-console" option is specific to the MS-Win console # version of Privoxy. If this option is used, Privoxy will # disconnect from and hide the command console. # #hide-console # #