# Note: Makefile is built automatically from Makefile.in # # $Id: GNUmakefile.in,v 1.64 2002/04/04 22:14:51 oes Exp $ # # Written by and Copyright (C) 2001 the SourceForge # Privoxy team. http://www.privoxy.org/ # # Based on the Internet Junkbuster originally written # by and Copyright (C) 1997 Anonymous Coders and # Junkbusters Corporation. http://www.junkbusters.com # # This program is free software; you can redistribute it # and/or modify it under the terms of the GNU General # Public License as published by the Free Software # Foundation; either version 2 of the License, or (at # your option) any later version. # # This program is distributed in the hope that it will # be useful, but WITHOUT ANY WARRANTY; without even the # implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. See the GNU General Public # License for more details. # # The GNU General Public License should be included with # this file. If not, you can view it at # http://www.gnu.org/copyleft/gpl.html # or write to the Free Software Foundation, Inc., 59 # Temple Place - Suite 330, Boston, MA 02111-1307, USA. # ############################################################################# # Set make command correctly ############################################################################# @SET_MAKE@ ############################################################################# # Version number (for RPM) ############################################################################# VERSION_MAJOR = @VERSION_MAJOR@ VERSION_MINOR = @VERSION_MINOR@ VERSION_POINT = @VERSION_POINT@ CODE_STATUS = @CODE_STATUS@ VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT) # will automatically be postfixed with -$(RPM_PACKAGEV) in the SPECfile RPM_VERSION = $(VERSION) RPM_PACKAGEV = @VERSION_RPM_PACKAGE@ ############################################################################# # Directories for "make install" ############################################################################# DEST = @prefix@ CONFDEST = @prefix@@sysconfdir@ SBIN_DEST = @prefix@@sbindir@ MAN_DEST = @prefix@@mandir@ ############################################################################# # Build tools ############################################################################# PROGRAM = privoxy@EXEEXT@ CC = @CC@ ECHO = echo GZIP_PROG = gzip #INSTALL = cp -f INSTALL = @INSTALL@ INSTALL_P = -m 0750 -g @GROUP@ -o @USER@ -b INSTALL_T = -m 0640 -g @GROUP@ -o @USER@ -b INSTALL_D = -m 0750 -g @GROUP@ -o @USER@ -d LD = @CC@ RM = rm -f STRIP_PROG = strip SED = sed CAT = cat RPM = rpm MV = mv TAR = tar LN = ln WDUMP = @WDUMP@ -dump JADECAT = @JADECAT@ JADEBIN = @JADEBIN@ DB = $(JADEBIN) $(JADECAT) -t sgml -ihtml -D.. -d ldpOK.dsl\#html DB2HTML = @DB2HTML@ DKPREFIX = @DKPREFIX@ MAN2HTML = @MAN2HTML@ G2H_CMD = groff -mandoc -Thtml TARGET_OS = @host@ #User Group paras USER = @USER@ GROUP = @GROUP@ # Program to do LF->CRLF # # The sed version should be the most portable, but it doesn't for for me, # the other two do. FIXME. # - Jon #DOSFILTER = $(SED) -e $$'s,$$,\r,' #DOSFILTER = gawk -v ORS='\r\n' '{print $0;}' DOSFILTER = perl -p -e 's/\n/\r\n/' ############################################################################# # Setup for make distribution rh and suse for now ############################################################################# TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz RPM_BASE = @RPM_BASE@ ############################################################################# # We include these files in our distributions ############################################################################# # take care that no CVS .cvsignore or other crappy files # are included here # and escape every '#' in the find. doh. CONFIG_FILES = config trust \ default.action \ basic.action intermediate.action advanced.action \ default.filter \ `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` DOC_FILES = AUTHORS LICENSE README ChangeLog \ `find doc/text/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` privoxy.1 ############################################################################# # Filenames and libraries ############################################################################# C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \ errlog.c filters.c gateway.c jbsockets.c jcc.c killpopup.c \ list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \ urlmatch.c C_OBJS = $(C_SRC:.c=.@OBJEXT@) C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c W32_FILES = @WIN_ONLY@w32.res W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES) W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32 W32_INIS = @WIN_ONLY@config.txt trust.txt PCRS_SRC = @STATIC_PCRS_ONLY@pcrs.c PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@) PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h) PCRE_SRC = @STATIC_PCRE_ONLY@pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:.c=.@OBJEXT@) PCRE_HDRS = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h # No REGEX (maybe because dynamically linked pcreposix): REGEX_SRC = @STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c REGEX_OBJS = $(REGEX_SRC:.c=.@OBJEXT@) REGEX_HDRS = $(REGEX_SRC:.c=.h) # Dependencies introduced by #include "project.h". PROJECT_H_DEPS = project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@pcre/pcre.h # Socket libraries for platforms that need them explicitly defined SOCKET_LIB = @SOCKET_LIB@ # PThreads library, if needed. PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@ SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC) OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS) HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS) LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB) ############################################################################# # Compiler switches ############################################################################# # The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build. # The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a # Win32 GUI build. # The flag "-pthread" is required if using Pthreads under Linux (and # possibly other OSs). SPECIAL_CFLAGS = @SPECIAL_CFLAGS@ # Add your flags here OTHER_CFLAGS = CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \ @STATIC_PCRE_ONLY@ -Ipcre LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS) ############################################################################# # Build section. # # There should NOT be any targets above this line. ############################################################################# all: $(PROGRAM) ############################################################################# # Phony targets ############################################################################# .PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \ suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \ install ############################################################################# # Define this explicitly because Solaris is broken! ############################################################################# %.o: %.c $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@ ############################################################################# # Win32 config files ############################################################################# inifiles: $(W32_INIS) config.txt: config $(SED) -e 's!\trustfile trust!trustfile trust.txt!' \ -e 's!\jarfile jarfile!jarfile jar.log!' \ -e 's!\logfile logfile!logfile privoxy.log!' \ -e 's!#Win32-only: !!' \ < $< | \ $(DOSFILTER) > $@ # LF to CRLF in default.action $(DOSFILTER) default.action.txt && mv default.action.txt default.action # LF to CRLF in default.filter $(DOSFILTER) default.filter.txt && mv default.filter.txt default.filter trust.txt: trust $(DOSFILTER) < $< > $@ re_filterfile.txt: re_filterfile $(DOSFILTER) < $< > $@ ############################################################################# # RPM specifice stuff (SuSE or Redhat, ..) ############################################################################# rpm-stuff: clean clobber for dir in RPMS SRPMS BUILD SOURCES SPECS; do \ if [ ! -w $(RPM_BASE)/$$dir ]; then \ $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \ $(ECHO) "Or add a suitable path to .rpmmacros like."; \ $(ECHO) "%_topdir /home/foo/rpm-build"; \ exit 1; \ fi; \ done; \ ############################################################################# # redhat distribution alpha and x86 ############################################################################# redhat-dist: rpm-stuff TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \ if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \ -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \ privoxy-rh.spec > $$TMPFILE ; then \ $(MV) -f $$TMPFILE privoxy-rh.spec; \ else \ $(ECHO) "Could not set version info in specfile."; \ exit 1;\ fi $(TAR) --exclude "CVS" --exclude "privoxy-suse.spec" -czf $(TAR_ARCH) . $(RPM) --clean -ta $(TAR_ARCH) if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi # anonymously ncftps the rpms to sourceforge redhat-upload: ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm # better should use `arch` here instead of ix86 to support other platforms too ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm @$(ECHO) ------------------------------------------------------- @$(ECHO) Now goto @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118 @$(ECHO) ... and release the files. @$(ECHO) ------------------------------------------------------- # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118 ############################################################################# # suse distribution. works fine. no need to be root. ############################################################################# suse-dist: rpm-stuff TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \ if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \ -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \ privoxy-suse.spec > $$TMPFILE ; then \ $(MV) -f $$TMPFILE privoxy-suse.spec; \ else \ $(ECHO) "Could not set version info in specfile."; \ exit 1;\ fi $(TAR) --exclude "CVS" --exclude "privoxy-rh.spec" -czf $(TAR_ARCH) . $(RPM) --clean -ta $(TAR_ARCH) if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi # anonymously ncftps the rpms to sourceforge suse-upload: ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm # better should use `arch` here instead of ix86 to support other platforms too ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm @$(ECHO) ------------------------------------------------------- @$(ECHO) Now goto @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118 @$(ECHO) ... and release the files. @$(ECHO) ------------------------------------------------------- # handle with care. use with root. suse-clean: rpm -e junkbuster-suse || true rm -rf /etc/junkbuster rm -rf /etc/rc.d/junkbuster* rm -rf /var/run/junkbuster.pid rm -rf /var/log/junkbuster rm -f /etc/init.d/junkbuster rm -f /usr/sbin/junkbuster rm -f /usr/sbin/rcjunkbuster rm -f /usr/share/man/man1/junkbuster.1.gz rpm -e privoxy-suse || true rm -rf /etc/privoxy rm -rf /etc/rc.d/privoxy* rm -rf /var/run/privoxy.pid rm -rf /var/log/privoxy rm -f /etc/init.d/privoxy rm -f /usr/sbin/privoxy rm -f /usr/sbin/rcprivoxy rm -f /usr/share/man/man1/privoxy.1.gz ############################################################################# # generic distribution ############################################################################# gen-dist: @$(ECHO) "" @$(ECHO) "You have run autoconf && autoheader && ./configure right?" @$(ECHO) "" $(MAKE) $(PROGRAM) $(STRIP_PROG) $(PROGRAM) $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS) # add program (cd .. && $(TAR) -cvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM)) # add config files for foo in $(CONFIG_FILES); do \ (cd .. && $(TAR) -uvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ done; # add documentation for foo in $(DOC_FILES); do \ (cd .. && $(TAR) -uvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ done; # and zip the archive $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS) $(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar @$(ECHO) Distribution with binary created. # anonymously ncftps the package to sourceforge gen-upload: ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz @$(ECHO) ------------------------------------------------------- @$(ECHO) Now goto @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118 @$(ECHO) ... and release the files. @$(ECHO) ------------------------------------------------------- # use with care gen-clean: $(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar* ############################################################################# # solaris distribution. verified on SF machines by swa. ############################################################################# solaris-dist: gen-dist @$(ECHO) Done. # anonymously ncftps the package to sourceforge solaris-upload: gen-upload @$(ECHO) Done. # use with care solaris-clean: gen-clean @$(ECHO) Done. ############################################################################# # hpux distribution ############################################################################# hpux-dist: @$(ECHO) coming soon. hpux-upload: @$(ECHO) coming soon. ############################################################################# # debian distribution ############################################################################# debian-dist: @$(ECHO) coming soon. debian-upload: @$(ECHO) coming soon. ############################################################################# # macosx distribution ############################################################################# macosx-dist: @$(ECHO) coming soon. macosx-upload: @$(ECHO) coming soon. ############################################################################# # amiga distribution ############################################################################# amiga-dist: @$(ECHO) coming soon. amiga-upload: @$(ECHO) coming soon. ############################################################################# # freebsd distribution. verified on SF machines by swa. ############################################################################# freebsd-dist: gen-dist @$(ECHO) Done. # anonymously ncftps the package to sourceforge freebsd-upload: gen-upload @$(ECHO) Done. # use with care freebsd-clean: gen-clean @$(ECHO) Done. ############################################################################# # Windows distribution ############################################################################# win-dist: $(ECHO) Not implemented. ############################################################################# # Tarball distribution. Only source files. No binaries. ############################################################################# MISC_FILES = install-sh config.sub configure.in GNUmakefile.in config.h.in config.guess privoxy* tarball-dist: $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS) # add source files for foo in `find . -name "*.c"`; do \ (cd .. && $(TAR) -uvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ done; # add header files for foo in `find . -name "*.h"`; do \ (cd .. && $(TAR) -uvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ done; # add config files for foo in $(CONFIG_FILES); do \ (cd .. && $(TAR) -uvhf privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ done; # add misc files for foo in $(MISC_FILES); do \ (cd .. && $(TAR) -uvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ done; # add documentation for foo in $(DOC_FILES); do \ (cd .. && $(TAR) -uvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ done; # and zip the archive $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS) $(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar @$(ECHO) Tarball distribution created. # anonymously ncftps the tarball to sourceforge tarball-upload: ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz @$(ECHO) ------------------------------------------------------- @$(ECHO) Now goto @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118 @$(ECHO) ... and release the files. @$(ECHO) ------------------------------------------------------- # handle with care tarball-clean: $(RM) privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz ############################################################################# # # Documentation # # converts doc/source/*.sgml into html, text and man pages # ############################################################################# # our style file doc/source/ldpOK.dsl: if [ "$(DKPREFIX)" != "none" ]; then \ sed -e "s@/usr/share/sgml/docbook/dsssl-stylesheets@$(DKPREFIX)@g" doc/source/ldp.dsl > doc/source/ldpOK.dsl; \ else \ cp doc/source/ldp.dsl doc/source/ldpOK.dsl; \ fi # Otherwise we get plain groff conversion. groff2html: $(G2H_CMD) ./privoxy.1 > doc/webserver/man-page/privoxy-man-page.html # developer manual dok-devel: doc/source/ldpOK.dsl rm -rf doc/webserver/developer-manual doc/source/developer-manual mkdir -p doc/text doc/source/developer-manual cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && mv developer-manual ../webserver cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/developer-manual.txt && rm -rf tmp.html developer-manual # user manual dok-user: doc/source/ldpOK.dsl rm -rf doc/webserver/user-manual doc/source/user-manual mkdir -p doc/text doc/source/user-manual cd doc/source/user-manual && $(DB) ../user-manual.sgml && cd .. && mv user-manual ../webserver cd doc/source && $(DB) -V nochunks user-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/user-manual.txt && rm -rf tmp.html user-manual # faq dok-faq: doc/source/ldpOK.dsl rm -rf doc/webserver/faq doc/source/faq mkdir -p doc/text doc/source/faq cd doc/source/faq && $(DB) ../faq.sgml && cd .. && mv faq ../webserver cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) tmp.html > ../text/faq.txt && rm -rf tmp.html faq # man page dok-man: doc/source/ldpOK.dsl rm -rf doc/man doc/webserver/man-page mkdir -p doc/man -p doc/webserver/man-page if [ "$(MAN2HTML)" != "false" ]; then \ $(ECHO) "Privoxy Man page

NAME

" > doc/webserver/man-page/privoxy-man-page.html; \ man ./privoxy.1 | $(MAN2HTML) -bare \ >> doc/webserver/man-page/privoxy-man-page.html; \ $(ECHO) "" >> doc/webserver/man-page/privoxy-man-page.html; \ else \ $(MAKE) groff2html; \ fi # readme page dok-readme: doc/source/ldpOK.dsl cd doc/source && $(DB) -V nochunks readme.sgml > tmp.html &&\ $(WDUMP) tmp.html > ../../README && rm -rf tmp.html dok: dok-devel dok-user dok-faq dok-man dok-readme # kludge to force recreation on next run. Rodgrigo? @rm -f doc/source/ldpOK.dsl @$(ECHO) Documentation created. # # an alternative to the above dok # redhat-dok: doc/source/ldpOK.dsl man2html mkdir -p doc/text doc/man doc/source/user-manual \ doc/source/developer-manual doc/source/faq ## user manual rm -rf doc/webserver/user-manual cd doc/source/user-manual && $(DB) ../user-manual.sgml && cd .. &&\ mv user-manual ../webserver cd doc/source && $(DB) -V nochunks user-manual.sgml > tmp.html && \ $(WDUMP) tmp.html > ../text/user-manual.txt && rm -rf tmp.html \ user-manual ## developer manual rm -rf doc/webserver/developer-manual cd doc/source/developer-manual && $(DB) ../developer-manual.sgml &&\ cd .. && mv developer-manual ../webserver cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && \ $(WDUMP) tmp.html > ../text/developer-manual.txt && rm -rf tmp.html \ developer-manual ## faq rm -rf doc/webserver/faq cd doc/source/faq && $(DB) ../faq.sgml && cd .. && mv faq ../webserver cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) \ tmp.html > ../text/faq.txt && rm -rf tmp.html faq ## readme $(MAKE) redhat-readme # kludge to force recreation on next run. Rodgrigo? @rm -f doc/source/ldpOK.dsl # For those with man2html ala RH7's. man2html: mkdir -p doc/webserver/man-page if [ "$(MAN2HTML)" != "false" ]; then \ $(MAN2HTML) privoxy.1 |grep -v "^Content-type" > doc/webserver/man-page/privoxy-man-page.html; \ perl -pi -e 's///; s//man2html/' doc/webserver/man-page/privoxy-man-page.html; \ else \ $(MAKE) groff2html; \ fi ## Make README redhat-readme: doc/source/ldpOK.dsl cd doc/source && $(DB) -V nochunks readme.sgml > tmp.html && $(WDUMP) \ tmp.html > ../../README && rm -rf tmp.html # kludge to force recreation on next run. Rodgrigo? @rm -f doc/source/ldpOK.dsl #### WIP targets HB ################## ## Make AUTHORS file authors: doc/source/ldpOK.dsl cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && $(WDUMP) \ tmp.html > ../../AUTHORS && rm -f tmp.html # kludge to force recreation on next run. Rodgrigo? @rm -f doc/source/ldpOK.dsl # make a man page, and then (lousy) HTML version. man: doc/source/ldpOK.dsl mkdir -p doc/source/man cd doc/source/man && docbook2man ../privoxy-man-page.sgml &&\ perl -pi -e 's/ //; s/\[ /\[/g' privoxy.1 cd doc/source/man && $(DB) ../privoxy-man-page.sgml &&\ mv -f index.html privoxy-man-page.html # kludge to force recreation on next run. Rodgrigo? @rm -f doc/source/ldpOK.dsl ############################################################################# # # Webserver # # moves dokumentation to webserver # ############################################################################# webserver: tidy @$(ECHO) ------------------------------------------------------- @$(ECHO) You have run make dok/redhat-dok before, right? @$(ECHO) Note that this command scps all stuff to the webserver, @$(ECHO) it will not remove obsolete documents. @$(ECHO) ------------------------------------------------------- @$(ECHO) Uploading @cd doc/webserver; \ upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \ $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xv' @$(ECHO) Fixing permissions @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/* -type d | xargs chmod 775 2>/dev/null' @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/* -type f | xargs chmod 664 2>/dev/null' web-actions: tidy @$(ECHO) Uploading @cd doc/webserver/actions; \ upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \ $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xv' @$(ECHO) Fixing permissions @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/* -type f | xargs chmod 664 2>/dev/null' ############################################################################# # Source file dependencies ############################################################################# actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS) encode.@OBJEXT@: encode.c encode.h config.h errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h @WIN_ONLY@win32.h gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h killpopup.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h cgi.h killpopup.@OBJEXT@: killpopup.c killpopup.h config.h $(PROJECT_H_DEPS) jcc.h loadcfg.h list.@OBJEXT@: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h killpopup.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h loaders.@OBJEXT@: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h miscutil.@OBJEXT@: miscutil.c miscutil.h config.h parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h ssplit.@OBJEXT@: ssplit.c ssplit.h config.h miscutil.h urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h # GNU regex gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h # PCRS pcrs.@OBJEXT@: pcrs.c pcre/pcre.h pcrs.h # PCRE pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c pcre/pcreposix.@OBJEXT@: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h pcre/study.@OBJEXT@: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h # An auxiliary program makes the PCRE default character table source pcre/chartables.c: pcre/dftables@EXEEXT@ pcre/dftables@EXEEXT@ >pcre/chartables.c pcre/dftables@EXEEXT@: pcre/dftables.c pcre/maketables.c pcre/pcre.h pcre/internal.h pcre/config.h $(CC) -o pcre/dftables@EXEEXT@ $(CFLAGS) pcre/dftables.c # Win32 w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/privoxy.ico config.h windres -D__MINGW32__=0.2 -O coff -i $< -o $@ # AmigaOS @AMIGAOS_ONLY@OBJS += amiga.o @AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code @AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel @AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o @AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h $(PROGRAM): $(OBJS) $(W32_FILES) $(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS) clean: $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) `find . -name TAGS -o -name tags` tidy: $(RM) `find . -name "*~" -o -name "#*#"` clobber: tidy $(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile privoxy.log core *.tar.gz *.tar # # FIXME: What is all this? # $(RM) cscope.* *.pdb *.lib *.exp distclean: clobber tags: $(SRCS) $(HDRS) etags $(SRCS) $(HDRS) install: all # # FIXME: This is a dirty hack to have an install target # that works at least for some setups. This needs # to be fixed! # $(STRIP_PROG) $(PROGRAM) $(INSTALL) $(INSTALL_D) $(SBIN_DEST) $(INSTALL) $(INSTALL_D) $(DEST)/user-manual $(INSTALL) $(INSTALL_D) $(DEST)/templates $(INSTALL) $(INSTALL_D) $(CONFDEST) $(INSTALL) $(INSTALL_P) $(PROGRAM) $(SBIN_DEST) if [ -d "doc/webserver/user-manual" ]; then $(INSTALL) $(INSTALL_T) doc/webserver/user-manual $(DEST); fi $(INSTALL) $(INSTALL_T) templates/[a-z]* $(DEST)/templates $(INSTALL) $(INSTALL_T) config default.action default.filter trust $(CONFDEST) # FIXME $(ECHO) privoxy.logrotate privoxy.monthly privoxy.weekly # FIXME: Need new manual! $(GZIP_PROG) -c privoxy.1 > $(MAN_DEST)/privoxy.1.gz $(INSTALL) $(INSTALL_P) privoxy.init /etc/init.d/privoxy ############################################################################# ## Local Variables: ## tab-width: 3 ## end: # $Log: GNUmakefile.in,v $ # Revision 1.64 2002/04/04 22:14:51 oes # No longer rely on find honoring -iname # # Revision 1.63 2002/04/04 21:06:22 swa # cosmetics. # # Revision 1.62 2002/04/04 20:49:50 swa # attempt to consolidate the # different dokbook versions. # # Revision 1.61 2002/04/04 19:18:21 swa # readme was leftover directory. use w3m instead # of lynx to be consistent among developers. use # consistent target naming. # # Revision 1.60 2002/04/04 12:25:41 oes # Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions # # Revision 1.59 2002/04/04 08:32:45 swa # wrong name for tarball-dist target. further fixed content of tarball dist # # Revision 1.58 2002/04/04 06:32:58 hal9 # New dok targets for make readme. # # Revision 1.57 2002/04/04 00:36:36 gliptak # always use pcre for matching # # Revision 1.56 2002/04/03 22:28:03 gliptak # Removed references to gnu_regex # # Revision 1.55 2002/04/03 19:54:29 swa # freebsd tested to work. attempt to move tarball dist target forward # # Revision 1.54 2002/04/03 14:54:07 oes # Standard clean and clobber semantics II # # Revision 1.53 2002/04/03 14:19:16 oes # Standard clean and clobber semantics # # Revision 1.52 2002/04/03 02:56:18 hal9 # Revert previous FAQ numbering kludge. # # Revision 1.51 2002/04/02 13:03:56 oes # Added fix for webserver permissions # # Revision 1.50 2002/04/02 03:46:24 hal9 # Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort # to make the Table of Contents not so 'busy' looking. SuSE needs testing :) # # Revision 1.49 2002/03/30 22:20:12 swa # cd didn't work. neither did find. # # Revision 1.48 2002/03/30 19:04:06 swa # people release differently. no good. # I want to make parts of the docs only. # # Revision 1.47 2002/03/30 09:05:21 swa # better packaging. better rpm building. # tar failed on sun (no exclude there). # # Revision 1.46 2002/03/29 20:09:01 swa # al's patch # # Revision 1.45 2002/03/29 19:45:45 swa # for lazy swa # # Revision 1.44 2002/03/29 17:42:44 gliptak # Correcting for Solaris tar limitations # # Revision 1.43 2002/03/29 07:40:03 swa # fixed make webserver. doh # # Revision 1.42 2002/03/29 06:59:04 swa # other users could not modify files on webserver # # Revision 1.41 2002/03/28 20:43:00 swa # set make correctly # # Revision 1.40 2002/03/28 04:22:44 hal9 # More on man2html stuff. # # Revision 1.39 2002/03/28 01:04:14 hal9 # More man2html stuff for docs. # # Revision 1.38 2002/03/27 16:02:30 swa # have a generic target # # Revision 1.37 2002/03/27 15:30:26 swa # have a consistent appearance # # Revision 1.36 2002/03/27 14:58:08 swa # can be used by mutilple targets # # Revision 1.35 2002/03/27 14:53:19 swa # added solaris-dist # # Revision 1.34 2002/03/27 10:30:11 swa # we want a html man file on the webserver # # Revision 1.33 2002/03/27 03:05:35 hal9 # Added man2html target for docs (redhat-dok only for now) # # Revision 1.32 2002/03/26 22:29:54 swa # we have a new homepage! # # Revision 1.31 2002/03/26 14:00:18 swa # fixed make tarball, tarball-dist, tarball-clean # # Revision 1.30 2002/03/25 12:52:25 swa # new targets # # Revision 1.29 2002/03/24 17:03:55 jongfoster # Name change # # Revision 1.28 2002/03/24 16:19:48 swa # configure needs to be generated. # # Revision 1.27 2002/03/24 16:13:57 swa # generated files are a nono in cvs # # Revision 1.26 2002/03/24 15:36:02 swa # did not build. # # Revision 1.25 2002/03/24 14:31:08 swa # remove more crappy files. set RPM # release version correctly. # # Revision 1.24 2002/03/24 14:19:55 swa # set rpm package release in configure.in. nowhere else. # # Revision 1.23 2002/03/24 13:06:49 swa # suse-clean now runs fine # # Revision 1.22 2002/03/24 12:56:21 swa # name change related issues. # # Revision 1.21 2002/03/24 12:43:57 swa # name change # # Revision 1.20 2002/03/24 11:39:17 jongfoster # Renaming config files # # Revision 1.19 2002/03/22 20:53:03 morcego # - Ongoing process to change name to JunkbusterNG # - configure/configure.in: no change needed # - GNUmakefile.in: # - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz # - PROGRAM = jbng@EXEEXT@ # - rh-spec now references as junkbusterng-rh.spec # - redhat-upload: references changed to junkbusterng-* (package names) # - tarball-dist: references changed to JunkbusterNG-distribution-* # - tarball-src: now JunkbusterNG-* # - install: initscript now junkbusterng.init and junkbusterng (when # installed) # - junkbuster-rh.spec: renamed to junkbusterng-rh.spec # - junkbusterng.spec: # - References to the expression ijb where changed where possible # - New package name: junkbusterng (all in lower case, acording to # the LSB recomendation) # - Version changed to: 2.9.13 # - Release: 1 # - Added: junkbuster to obsoletes and conflicts (Not sure this is # right. If it obsoletes, why conflict ? Have to check it later) # - Summary changed: Stefan, please check and aprove it # - Changes description to use the new name # - Sed string was NOT changed. Have to wait to the manpage to # change first # - Keeping the user junkbuster for now. It will require some aditional # changes on the script (scheduled for the next specfile release) # - Added post entry to move the old logfile to the new log directory # - Removing "chkconfig --add" entry (not good to have it automaticaly # added to the startup list). # - Added preun section to stop the service with the old name, as well # as remove it from the startup list # - Removed the chkconfig --del entry from the conditional block on # the preun scriptlet (now handled on the %files section) # - junkbuster.init: renamed to junkbusterng.init # - junkbusterng.init: # - Changed JB_BIN to jbng # - Created JB_OBIN with the old value of JB_BIN (junkbuster), to # be used where necessary (config dir) # # Aditional notes: # - The config directory is /etc/junkbuster yet. Have to change it on the # specfile, after it is changes on the code # - The only files that got renamed on the cvs tree were the rh specfile and # the init file. Some file references got changes on the makefile and on the # rh-spec (as listed above) # # Revision 1.18 2002/03/21 23:00:00 swa # want to autogenerate stuff. # # Revision 1.17 2002/03/19 19:30:04 morcego # - Fixing stylesheet checking on configure. If it is found, no further checks # should be done # # - configure will now check for db2html or docbook2html (should work now # on SuSe without the docbktls package) # # Revision 1.16 2002/03/14 22:32:32 hal9 # Bumped the RPM version. # # Revision 1.15 2002/03/08 20:00:28 swa # some leftovers. # # Revision 1.14 2002/03/07 18:25:56 swa # synced redhat and suse build process # # Revision 1.13 2002/03/07 17:17:56 oes # (Hopefully) fixed for older make versions # # Revision 1.12 2002/03/07 15:28:27 swa # more informative # # Revision 1.11 2002/03/06 14:33:18 sarantis # Use proper temp file, not "abc". # # Revision 1.10 2002/03/06 14:19:35 sarantis # Cleanup PID_FILE_PATH from redhat-dist target # # Revision 1.9 2002/03/05 17:31:11 morcego # Search for docbook.dsl. Should solve portability problems for SuSe. # # Revision 1.8 2002/03/05 14:07:42 morcego # configure now detects rpm topdir, and change GNUmakefile acordingly # (based on sugestion by Sarantis Paskalis) # # Revision 1.7 2002/03/05 13:43:28 morcego # Checking for text browser, so redhat-dok can work. # # Revision 1.6 2002/03/05 13:10:51 morcego # Changes to implement redhat-dok (Hal Burgiss) # Changes to make it work on other distros and out-of-the-shelf configurations # # Revision 1.5 2002/02/27 15:30:39 hal9 # Reset $(RPM_PACKAGEV) to 1 (was 2) # # Revision 1.4 2002/01/17 21:44:04 jongfoster # Adding urlmatch.[ch] # # Revision 1.3 2002/01/04 15:26:08 oes # Added tarball-src target # # Revision 1.2 2001/12/30 14:07:31 steudten # - Add signal handling (unix) # - Add SIGHUP handler (unix) # - Add creation of pidfile (unix) # - Add action 'top' in rc file (RH) # - Add entry 'SIGNALS' to manpage # - Add exit message to logfile (unix) # # Revision 1.1 2001/12/01 11:22:57 jongfoster # Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of # make break in a more obvious way. # Adding .PHONY section. # # Revision 1.40 2001/12/01 00:24:11 jongfoster # Renaming various config files # Fixing CR->CRLF under Win32 (I hope) # # Revision 1.39 2001/11/06 12:07:30 steudten # Add --clean for building rpm in target redhat-dist. # # Revision 1.38 2001/11/05 21:35:23 steudten # Complete rewrite for the 'redhat-dist' target. # Checks for writeable RPM build directories for calling user. # So you must not be root, just set the modes to 1777 to # build a RH package. # Fix the upload-target to be arch independant. # Add target for 'solaris-dist' - coming soon. # # Revision 1.37 2001/11/01 00:52:04 hal9 # Redhat-upload stuff per Stefan. # # Revision 1.36 2001/10/31 19:26:13 swa # automate process of uploading new releases # to sf. # # Revision 1.35 2001/10/15 22:14:59 joergs # Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in # the general CFLAGS already. # # Revision 1.34 2001/10/15 18:28:06 steudten # remove config.cache for target clobber. # Cleanup make dist for RH and S.u.S.E. # # Revision 1.33 2001/10/10 12:43:33 oes # Added ugly hack to make install target work at least for some setups. # # Revision 1.32 2001/10/09 22:38:19 jongfoster # Correcting actionsfile filename for Win32 INI build # # Revision 1.31 2001/09/23 10:13:48 swa # upload process established. run make webserver and # the documentation is moved to the webserver. documents # are now linked correctly. # # Revision 1.30 2001/09/19 17:55:49 oes # Fixed CFLAGS # # Revision 1.29 2001/09/16 17:34:27 jongfoster # Removing showargs.[ch], adding cgi(simple|edit).[ch] # Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source # of build problems. # # Revision 1.28 2001/09/13 15:19:08 swa # we want text files as well. # # Revision 1.27 2001/09/13 13:11:37 steudten # # Replace DEBUG_CFLAGS with OTHER_CFLAGS # # Revision 1.26 2001/09/12 23:44:54 david__schmidt # Mac OSX (Darwin) support added. # # Revision 1.25 2001/09/12 22:55:45 joergs # AmigaOS support added. # # Revision 1.24 2001/09/12 17:28:59 david__schmidt # # OS/2 port: update autoconf'd support for the platform. # # Revision 1.23 2001/09/12 16:28:42 swa # added "make dok" section to generate html pages from # the sgml source documents. note that the we do not want # generated stuff in cvs. # # Revision 1.22 2001/09/10 16:31:23 swa # buildroot definition in the specfile fucks up the build # process under suse. hence I moved it to the "rpm -ta" # command # # Revision 1.21 2001/09/10 11:12:49 oes # Turning on -Wall # # Revision 1.20 2001/08/02 22:04:29 jongfoster # Removing some remaining references to obsolete w32rulesdlg.[ch] # # Revision 1.19 2001/07/30 22:14:03 jongfoster # Removing obsolete w32rulesdlg.c and w32rulesdlg.h # # Revision 1.18 2001/07/29 17:09:17 jongfoster # Major changes to build system in order to fix these bugs: # - pthreads under Linux was broken - changed -lpthread to -pthread # - Compiling in MinGW32 mode under CygWin now correctly detects # which shared libraries are available # - Solaris support (?) (Not tested under Solaris yet) # # Revision 1.17 2001/07/28 16:44:54 oes # Fixed sed LF->CRLF conversion and removed deprecated files # # Revision 1.16 2001/07/15 19:45:33 jongfoster # Added support for linking with POSIX threads library # # Revision 1.15 2001/07/13 13:48:07 oes # - Moved STATIC #define for pcre to (ac)config.h # - Made -Ipcre depandant on static pcre compilation to # avoid version conflicts # - Included compilation and depandancies for new deanimate.c # - Made changes to the pcre/pcreposix/pcrs build process # as required by the new library autodetection in # configure.in # # Revision 1.14 2001/07/01 16:27:44 oes # Fixed misplaced dependancy # # Revision 1.13 2001/06/29 13:18:36 oes # - added depandancy of filters.o on cgi.h # # Revision 1.12 2001/06/12 17:15:56 swa # fixes, because a clean build on rh6.1 was impossible. # GZIP confuses make, %configure confuses rpm, etc. # # Revision 1.11 2001/06/11 11:26:35 sarantis # RPM version should be the same as ijbswa version. The rpm release is # specified in the specfile. # # Revision 1.10 2001/06/07 17:27:45 swa # added suse build section # # Revision 1.9 2001/06/04 18:31:58 swa # files are now prefixed with either `confdir' or `logdir'. # `make redhat-dist' replaces both entries confdir and logdir # with redhat values # # Revision 1.8 2001/06/04 10:44:57 swa # `make redhatr-dist' now works. Except for the paths # in the config file. # # Revision 1.7 2001/06/03 17:09:09 swa # swa for oes: reversed my earlier change # # Revision 1.6 2001/06/03 17:07:27 swa # swa for oes # # Revision 1.5 2001/06/03 13:57:26 swa # compile cgi.c (for andreas' GUI) # # Revision 1.4 2001/05/31 21:18:45 jongfoster # Added files actions.[ch], actionlist.h, list.[ch] to Makefile # # Revision 1.3 2001/05/29 20:02:48 joergs # Changes for AmigaOS added. # # Revision 1.2 2001/05/17 22:23:23 oes # - Added auto-generation of CRLFs for Win32 config files # - Added comment-prefix to all Win32-only options in the config file # and provided auto stripping of this prefix for the Win32 platform by make # # Revision 1.1.1.1 2001/05/15 13:59:00 oes # Initial import of version 2.9.3 source tree # #