# Note: Makefile is built automatically from Makefile.in # # $Id: GNUmakefile.in,v 1.96 2002/04/27 17:44:32 morcego Exp $ # # Written by and Copyright (C) 2001 the SourceForge # Privoxy team. http://www.privoxy.org/ # # Based on the Internet Junkbuster originally written # by and Copyright (C) 1997 Anonymous Coders and # Junkbusters Corporation. http://www.junkbusters.com # # This program is free software; you can redistribute it # and/or modify it under the terms of the GNU General # Public License as published by the Free Software # Foundation; either version 2 of the License, or (at # your option) any later version. # # This program is distributed in the hope that it will # be useful, but WITHOUT ANY WARRANTY; without even the # implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. See the GNU General Public # License for more details. # # The GNU General Public License should be included with # this file. If not, you can view it at # http://www.gnu.org/copyleft/gpl.html # or write to the Free Software Foundation, Inc., 59 # Temple Place - Suite 330, Boston, MA 02111-1307, USA. # ############################################################################# # Set make command correctly ############################################################################# @SET_MAKE@ ############################################################################# # Version number (for RPM) ############################################################################# VERSION_MAJOR = @VERSION_MAJOR@ VERSION_MINOR = @VERSION_MINOR@ VERSION_POINT = @VERSION_POINT@ CODE_STATUS = @CODE_STATUS@ VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT) RPM_VERSION = $(VERSION) ############################################################################# # Directories for "make install" ############################################################################# DEST = @prefix@ CONFDEST = @prefix@@sysconfdir@ SBIN_DEST = @prefix@@sbindir@ MAN_DEST = @prefix@@mandir@ DOK_WEB_USEM=doc/webserver/user-manual ############################################################################# # Build tools ############################################################################# PROGRAM = privoxy@EXEEXT@ CC = @CC@ ECHO = echo GZIP_PROG = gzip #INSTALL = cp -f INSTALL = @INSTALL@ INSTALL_P = -m 0750 -g @GROUP@ -o @USER@ -b INSTALL_T = -m 0640 -g @GROUP@ -o @USER@ -b INSTALL_D = -m 0750 -g @GROUP@ -o @USER@ -d LD = @CC@ RM = rm -f STRIP_PROG = strip SED = sed CAT = cat RPM = rpm MV = mv TAR = tar LN = ln WDUMP = @WDUMP@ -dump JADECAT = @JADECAT@ JADEBIN = @JADEBIN@ DB = $(JADEBIN) $(JADECAT) -ihtml -t sgml -D.. -d ldpOK.dsl\#html DB2HTML = @DB2HTML@ DKPREFIX = @DKPREFIX@ MAN2HTML = @MAN2HTML@ G2H_CMD = groff -mandoc -Thtml TARGET_OS = @host@ PERL = perl #User Group paras USER = @USER@ GROUP = @GROUP@ # Program to do LF->CRLF # # The sed version should be the most portable, but it doesn't for for me, # the other two do. FIXME. # - Jon #DOSFILTER = $(SED) -e $$'s,$$,\r,' #DOSFILTER = gawk -v ORS='\r\n' '{print $0;}' DOSFILTER = $(PERL) -p -e 's/\n/\r\n/' ############################################################################# # Setup for make distribution rh and suse for now ############################################################################# TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz RPM_BASE = @RPM_BASE@ ############################################################################# # We include these files in our distributions ############################################################################# # take care that no CVS .cvsignore or other crappy files # are included here # and escape every '#' in the find. doh. CONFIG_FILES = config trust \ default.action \ basic.action intermediate.action advanced.action \ default.filter \ `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` DOC_FILES = AUTHORS LICENSE README ChangeLog \ `find doc/text/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` \ `find doc/webserver/ -name "*.html"` \ `find doc/webserver/ -name "*.css"` \ privoxy.1 ############################################################################# # Filenames and libraries ############################################################################# C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \ errlog.c filters.c gateway.c jbsockets.c jcc.c killpopup.c \ list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \ urlmatch.c C_OBJS = $(C_SRC:.c=.@OBJEXT@) C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c W32_FILES = @WIN_ONLY@w32.res W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES) W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32 W32_INIS = @WIN_ONLY@config.txt trust.txt PCRS_SRC = @STATIC_PCRS_ONLY@pcrs.c PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@) PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h) PCRE_SRC = @STATIC_PCRE_ONLY@pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:.c=.@OBJEXT@) PCRE_HDRS = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h # No REGEX (maybe because dynamically linked pcreposix): REGEX_SRC = @STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c REGEX_OBJS = $(REGEX_SRC:.c=.@OBJEXT@) REGEX_HDRS = $(REGEX_SRC:.c=.h) # Dependencies introduced by #include "project.h". PROJECT_H_DEPS = project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@pcre/pcre.h # Socket libraries for platforms that need them explicitly defined SOCKET_LIB = @SOCKET_LIB@ # PThreads library, if needed. PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@ SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC) OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS) HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS) LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB) ############################################################################# # Compiler switches ############################################################################# # The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build. # The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a # Win32 GUI build. # The flag "-pthread" is required if using Pthreads under Linux (and # possibly other OSs). SPECIAL_CFLAGS = @SPECIAL_CFLAGS@ # Add your flags here OTHER_CFLAGS = CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \ @STATIC_PCRE_ONLY@ -Ipcre LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS) ############################################################################# # Build section. # # There should NOT be any targets above this line. ############################################################################# all: $(PROGRAM) ############################################################################# # Phony targets ############################################################################# .PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \ suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \ install conectiva-spec conectiva-dist conectiva-upload ############################################################################# # Define this explicitly because Solaris is broken! ############################################################################# %.o: %.c $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@ ############################################################################# # Win32 config files ############################################################################# inifiles: $(W32_INIS) config.txt: config $(SED) -e 's!\trustfile trust!trustfile trust.txt!' \ -e 's!\jarfile jarfile!jarfile jar.log!' \ -e 's!\logfile logfile!logfile privoxy.log!' \ -e 's!#Win32-only: !!' \ < $< | \ $(DOSFILTER) > $@ # LF to CRLF in default.action $(DOSFILTER) default.action.txt && mv default.action.txt default.action # LF to CRLF in default.filter $(DOSFILTER) default.filter.txt && mv default.filter.txt default.filter trust.txt: trust $(DOSFILTER) < $< > $@ re_filterfile.txt: re_filterfile $(DOSFILTER) < $< > $@ ############################################################################# # Pre-dist check: ############################################################################# dist-check: @if [ -d CVS ]; then \ $(ECHO) "***************************************************"; \ $(ECHO) "*** ***"; \ $(ECHO) "*** WARNING ***"; \ $(ECHO) "*** ***"; \ $(ECHO) "*** The presence of a CVS subdirectory suggests ***"; \ $(ECHO) "*** that you are trying to build a distribution ***"; \ $(ECHO) "*** package based on a checked out, not an ***"; \ $(ECHO) "*** exported copy of the source tree. Please ***"; \ $(ECHO) "*** see \"Releasing a new version\" in the ***"; \ $(ECHO) "*** developer manual. ***"; \ $(ECHO) "*** ***"; \ $(ECHO) "***************************************************"; \ $(ECHO) "Type \"yes i am sure\" if you are sure that you"; \ $(ECHO) -n "really want to proceed: "; \ read answer; \ if [ "$$answer" != "yes i am sure" ]; then exit 1; fi \ fi; ############################################################################# # RPM specifice stuff (SuSE or Redhat, ..) ############################################################################# rpm-stuff: dist-check clean clobber for dir in RPMS SRPMS BUILD SOURCES SPECS; do \ if [ ! -w $(RPM_BASE)/$$dir ]; then \ $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \ $(ECHO) "Or add a suitable path to .rpmmacros like."; \ $(ECHO) "%_topdir /home/foo/rpm-build"; \ exit 1; \ fi; \ done; \ check-release: @if [ "$(RPM_PACKAGEV)" = "" ]; then \ echo ; \ echo " ERROR: NO RPM_PACKAGEV VALUE"; \ echo " No value given for RPM_PACKAGEV. Please use:"; \ echo " make dist-upload RPM_PACKAGEV=release"; \ echo " where \"release\" is the release number you want to and"; \ echo " where \"dist\" is the name of the distro (redhat or suse)"; \ echo ; \ echo " Ex: make redhat-upload RPM_PACKAGEV=1"; \ echo ""; \ echo "ATTENTION: If your distribution use a specific tag on the"; \ echo " release field (like \"cl\" for Conectiva, and"; \ echo " \"mdk\" for Mandrake), DO NOT put it on the value"; \ echo " given to RPM_PACKAGEV. It will be added automaticaly."; \ echo " Do it like you would do for a redhat package,"; \ echo " (i.e. just the number)."; \ echo ; \ exit 1; \ fi ############################################################################# # Create Conectiva specfile from RedHat specfile ############################################################################# conectiva-spec: $(RM) privoxy-cl.spec chmod a+x genclspec.sh ./genclspec.sh ############################################################################# # Conectiva distribution for x86 ############################################################################# conectiva-dist: rpm-stuff conectiva-spec $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-rh.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) . $(RPM) --clean -ta $(TAR_ARCH) if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi conectiva-upload: check-release make redhat-upload RPM_PACKAGEV=$(RPM_PACKAGEV)cl ############################################################################# # redhat distribution alpha and x86 ############################################################################# redhat-dist: rpm-stuff $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) . $(RPM) --clean -ta $(TAR_ARCH) if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi # anonymously ncftps the rpms to sourceforge redhat-upload: check-release ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm # better should use `arch` here instead of ix86 to support other platforms too ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm @$(ECHO) ------------------------------------------------------- @$(ECHO) Now goto @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118 @$(ECHO) ... and release the files. @$(ECHO) ------------------------------------------------------- # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118 ############################################################################# # suse distribution. works fine. no need to be root. ############################################################################# suse-dist: rpm-stuff # TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \ # if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \ # -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \ # privoxy-suse.spec > $$TMPFILE ; then \ # $(MV) -f $$TMPFILE privoxy-suse.spec; \ # else \ # $(ECHO) "Could not set version info in specfile."; \ # exit 1;\ # fi $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) . $(RPM) --clean -ta $(TAR_ARCH) if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi # anonymously ncftps the rpms to sourceforge suse-upload: check-release ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm # better should use `arch` here instead of ix86 to support other platforms too ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm @$(ECHO) ------------------------------------------------------- @$(ECHO) Now goto @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118 @$(ECHO) ... and release the files. @$(ECHO) ------------------------------------------------------- # handle with care. use with root. suse-clean: $(RPM) -e junkbuster-suse || true $(RM) -r /etc/junkbuster $(RM) -r /etc/rc.d/junkbuster* $(RM) -r /var/run/junkbuster.pid $(RM) -r /var/log/junkbuster $(RM) /etc/init.d/junkbuster $(RM) /usr/sbin/junkbuster $(RM) /usr/sbin/rcjunkbuster $(RM) /usr/share/man/man1/junkbuster.1.gz $(RPM) -e privoxy-suse || true $(RM) -r /etc/privoxy $(RM) -r /etc/rc.d/privoxy* $(RM) -r /var/run/privoxy.pid $(RM) -r /var/log/privoxy $(RM) /etc/init.d/privoxy $(RM) /usr/sbin/privoxy $(RM) /usr/sbin/rcprivoxy $(RM) /usr/share/man/man1/privoxy.1.gz ############################################################################# # generic distribution ############################################################################# gen-dist: dist-check @$(ECHO) "" @$(ECHO) "You have run autoconf && autoheader && ./configure right?" @$(ECHO) "" $(MAKE) $(PROGRAM) $(STRIP_PROG) $(PROGRAM) $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS) # add program (cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM)) # add config files for foo in $(CONFIG_FILES); do \ (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ done; # add documentation for foo in $(DOC_FILES); do \ (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \ done; # and zip the archive $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS) $(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar @$(ECHO) Distribution with binary created. # anonymously ncftps the package to sourceforge gen-upload: ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz @$(ECHO) ------------------------------------------------------- @$(ECHO) Now goto @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118 @$(ECHO) ... and release the files. @$(ECHO) ------------------------------------------------------- # use with care gen-clean: $(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar* ############################################################################# # solaris distribution. verified on SF machines by swa. ############################################################################# solaris-dist: gen-dist @$(ECHO) Done. # anonymously ncftps the package to sourceforge solaris-upload: gen-upload @$(ECHO) Done. # use with care solaris-clean: gen-clean @$(ECHO) Done. ############################################################################# # hpux distribution ############################################################################# hpux-dist: @$(ECHO) coming soon. hpux-upload: @$(ECHO) coming soon. ############################################################################# # debian distribution ############################################################################# debian-dist: @$(ECHO) coming soon. debian-upload: @$(ECHO) coming soon. ############################################################################# # macosx distribution ############################################################################# macosx-dist: @$(ECHO) coming soon. macosx-upload: @$(ECHO) coming soon. ############################################################################# # amiga distribution ############################################################################# amiga-dist: @$(ECHO) coming soon. amiga-upload: @$(ECHO) coming soon. ############################################################################# # freebsd distribution. verified on SF machines by swa. ############################################################################# freebsd-dist: gen-dist @$(ECHO) Done. # anonymously ncftps the package to sourceforge freebsd-upload: gen-upload @$(ECHO) Done. # use with care freebsd-clean: gen-clean @$(ECHO) Done. ############################################################################# # Windows distribution ############################################################################# win-dist: $(ECHO) Not implemented. ############################################################################# # Tarball distribution: No CVS dirs, dotfiles, debian build dir, # (FIXME:) only parts of the static / generated docs mix in doc/webserver ############################################################################# tarball-dist: dist-check clean clobber $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS) for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \ -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" \)`; do \ files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \ done && \ cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \ # and zip the archive $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS) $(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar @$(ECHO) Tarball distribution created. # anonymously ncftps the tarball to sourceforge tarball-upload: ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz @$(ECHO) ------------------------------------------------------- @$(ECHO) Now goto @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118 @$(ECHO) ... and release the files. @$(ECHO) ------------------------------------------------------- tarball-clean: $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz ############################################################################# # # Documentation # # converts doc/source/*.sgml into html, text and man pages # ############################################################################# # now works for swa # our style file doc/source/ldpOK.dsl: # if [ "$(DKPREFIX)" != "none" ]; then \ # sed -e "s@/usr/share/sgml/docbook/dsssl-stylesheets@$(DKPREFIX)@g" doc/source/ldp.dsl > doc/source/ldpOK.dsl; \ # else \ # cp doc/source/ldp.dsl doc/source/ldpOK.dsl; \ # fi cp doc/source/ldp.dsl doc/source/ldpOK.dsl; # Otherwise we get plain groff conversion. groff2html: $(G2H_CMD) ./privoxy.1 | $(SED) -e 's@@@' > doc/webserver/man-page/privoxy-man-page.html # developer manual dok-devel: doc/source/ldpOK.dsl $(RM) doc/webserver/developer-manual/*.html $(RM) -r doc/source/developer-manual mkdir -p doc/text doc/source/developer-manual cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/ cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/developer-manual.txt && $(RM) -r tmp.html developer-manual # user manual dok-user: doc/source/ldpOK.dsl $(RM) doc/webserver/user-manual/*.html $(RM) -r doc/source/user-manual/ mkdir -p doc/text doc/source/user-manual cd doc/source/user-manual && $(DB) ../user-manual.sgml && cd .. && cp user-manual/*.html ../webserver/user-manual/ cd doc/source && $(DB) -V nochunks user-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/user-manual.txt && $(RM) -r tmp.html user-manual # faq dok-faq: doc/source/ldpOK.dsl $(RM) doc/webserver/faq/*.html $(RM) -r doc/source/faq mkdir -p doc/text doc/source/faq cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/ cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) tmp.html > ../text/faq.txt && $(RM) -r tmp.html faq # man page dok-man: doc/source/ldpOK.dsl $(RM) doc/man/* doc/webserver/man-page/*.html ifneq ($(MAN2HTML),false) $(ECHO) "Privoxy Man page

NAME

" > doc/webserver/man-page/privoxy-man-page.html man ./privoxy.1 | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html $(ECHO) "" >> doc/webserver/man-page/privoxy-man-page.html else $(MAKE) groff2html endif # readme page dok-readme: doc/source/ldpOK.dsl cd doc/source && $(DB) -V nochunks readme.sgml > tmp.html &&\ $(WDUMP) tmp.html > ../../README && $(RM) -r tmp.html # webserver files dok-webserver: doc/source/ldpOK.dsl cd doc/source/webserver && $(DB) -V nochunks index.sgml > ../../webserver/index.html $(PERL) -pi.bak -e 's/..\/p_doc.css/p_web.css/;\ s/<\/HEAD/\n<\/HEAD/;\ s/<\/HEAD/\n<\/HEAD/'\ doc/webserver/index.html && $(RM) doc/source/webserver/*.bak # Main documentation target. dok: dok-release dok-devel dok-user dok-faq dok-readme dok-webserver dok-authors # kludge to force recreation on next run. Rodrigo? -swa # I see no need for it, but no problem either. Let it stay. -morcego @$(RM) doc/source/ldpOK.dsl @$(ECHO) Documentation created. # # an alternative to the above dok. disabled man page creation for the moment # redhat-dok: dok-release dok-devel dok-user dok-faq redhat-readme dok-webserver dok-authors # kludge to force recreation on next run. Rodrigo? -swa # I see no need for it, but no problem either. Let it stay. -morcego @$(RM) doc/source/ldpOK.dsl @$(ECHO) Documentation created. # For those with man2html ala RH7's. man2html: mkdir -p doc/webserver/man-page ifneq ($(MAN2HTML),false) $(MAN2HTML) privoxy.1 |grep -v "^Content-type" > tmp.html $(PERL) -pi.bak -e 's///; s//man2html/' tmp.html $(PERL) -pi.bak -e 's/(<\/HEAD>)/<\/HEAD>/' tmp.html # Get rid of spurious  from conversion. (How to do this with perl?) $(SED) -e 's///g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.* else $(MAKE) groff2html endif ## Make README redhat-readme: doc/source/ldpOK.dsl cd doc/source && $(DB) -V nochunks readme.sgml > tmp.html && $(WDUMP) \ tmp.html > ../../README && $(RM) -r tmp.html # kludge to force recreation on next run. Rodgrigo? @$(RM) doc/source/ldpOK.dsl ## Make AUTHORS file dok-authors: doc/source/ldpOK.dsl cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && $(WDUMP) \ tmp.html > ../../AUTHORS && $(RM) tmp.html # kludge to force recreation on next run. Rodgrigo? @$(RM) doc/source/ldpOK.dsl # make a man page, and then (lousy) HTML version. # Requires docbook2man (short perl script), see comments # in privoxy-man-page.sgml. This target is not invoked from other dok targets. # It is built separately due to dependencies on perl scripts. man: doc/source/ldpOK.dsl mkdir -p doc/source/man cd doc/source/man && docbook2man ../privoxy-man-page.sgml &&\ perl -pi.bak -e 's/ //; s/\[ /\[/g' privoxy.1 cd doc/source/man && $(DB) ../privoxy-man-page.sgml &&\ mv -f index.html privoxy-man-page.html # This html is not used. See make man2html. mv -f doc/source/man/privoxy.1 privoxy.1 $(MAKE) man2html # kludge to force recreation on next run. Rodgrigo? @$(RM) -r doc/source/ldpOK.dsl doc/source/man # Set doc entities for VERSION and CODE_STATUS in sgml docs. Toggle content # exceptions accordingly. This needs to go before any doc building (doh). dok-release: @$(ECHO) Setting doc version and status to $(VERSION), $(CODE_STATUS) @$(PERL) -pi.bak -e 's///;\ s///' \ doc/source/*sgml doc/source/*/*sgml $(RM) -r doc/source/*bak doc/source/*/*bak ifeq ($(CODE_STATUS),stable) @$(ECHO) Setting docs to stable $(VERSION) @$(PERL) -pi.bak -e 's///;\ s///' \ doc/source/*sgml doc/source/*/*sgml $(RM) -r doc/source/*bak doc/source/*/*bak else @$(ECHO) Setting docs to not stable $(VERSION) @$(PERL) -pi.bak -e 's///;\ s///' \ doc/source/*sgml doc/source/*/*sgml $(RM) -r doc/source/*bak doc/source/*/*bak endif dok-pdf: doc/source/ldpOK.dsl dok-release $(RM) doc/pdf/*.pdf cp -f doc/source/*.sgml doc/pdf cp -f doc/source/*.dsl doc/pdf cd doc/pdf && db2pdf --pdf -s ldpOK.dsl user-manual.sgml && mv user-manual.pdf privoxy-user-manual.pdf > /dev/null 2>&1 cd doc/pdf && db2pdf --pdf -s ldpOK.dsl developer-manual.sgml && mv developer-manual.pdf privoxy-developer-manual.pdf > /dev/null 2>&1 cd doc/pdf && db2pdf --pdf -s ldpOK.dsl faq.sgml && mv faq.pdf privoxy-faq.pdf > /dev/null 2>&1 $(RM) doc/pdf/*.sgml doc/pdf/*.dsl doc/pdf/*.out doc/pdf/*.tex doc/pdf/*.log doc/pdf/*.aux # kludge to force recreation on next run. Rodgrigo? @$(RM) doc/source/ldpOK.dsl # the layout and style with db2pdf sucks, here is an alternative dok-pdf2: doc/source/ldpOK.dsl dok-release mkdir -p doc/source/temp # this directory not in cvs cd doc/source && $(DB) -V nochunks user-manual.sgml > temp/privoxy-user-manual.html cd doc/source && $(DB) -V nochunks developer-manual.sgml > temp/privoxy-developer-manual.html cd doc/source && $(DB) -V nochunks faq.sgml > temp/privoxy-faq.html # one could use html2ps and ps2pdf. well, that does not work. htmlps produces incorrect output. # kludge to force recreation on next run. Rodgrigo? @$(RM) doc/source/ldpOK.dsl ############################################################################# # # Webserver # # moves dokumentation to webserver # ############################################################################# webserver: tidy @$(ECHO) ------------------------------------------------------- @$(ECHO) You have run make dok/redhat-dok before, right? @$(ECHO) Note that this command scps all stuff to the webserver, @$(ECHO) it will not remove obsolete documents. @$(ECHO) ------------------------------------------------------- @$(ECHO) Uploading @cd doc/webserver; \ upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \ $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp' @$(ECHO) Fixing permissions @ssh ijbswa.sourceforge.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true' @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true' @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null; true' web-actions: tidy @$(ECHO) Uploading @cd doc/webserver/actions; \ upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \ $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm' @$(ECHO) Fixing permissions @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null' @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null' ############################################################################# # Source file dependencies ############################################################################# actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS) encode.@OBJEXT@: encode.c encode.h config.h errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h @WIN_ONLY@win32.h gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h killpopup.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h cgi.h killpopup.@OBJEXT@: killpopup.c killpopup.h config.h $(PROJECT_H_DEPS) jcc.h loadcfg.h list.@OBJEXT@: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h killpopup.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h loaders.@OBJEXT@: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h miscutil.@OBJEXT@: miscutil.c miscutil.h config.h parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h ssplit.@OBJEXT@: ssplit.c ssplit.h config.h miscutil.h urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h # GNU regex gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h # PCRS pcrs.@OBJEXT@: pcrs.c pcre/pcre.h pcrs.h # PCRE pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c pcre/pcreposix.@OBJEXT@: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h pcre/study.@OBJEXT@: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h # An auxiliary program makes the PCRE default character table source pcre/chartables.c: pcre/dftables@EXEEXT@ pcre/dftables@EXEEXT@ >pcre/chartables.c pcre/dftables@EXEEXT@: pcre/dftables.c pcre/maketables.c pcre/pcre.h pcre/internal.h pcre/config.h $(CC) -o pcre/dftables@EXEEXT@ $(CFLAGS) pcre/dftables.c # Win32 w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/privoxy.ico config.h windres -D__MINGW32__=0.2 -O coff -i $< -o $@ # AmigaOS @AMIGAOS_ONLY@OBJS += amiga.o @AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code @AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel @AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o @AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h $(PROGRAM): $(OBJS) $(W32_FILES) $(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS) clean: $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) `find . -name TAGS -o -name tags` tidy: $(RM) `find . -name "*~"` # $(RM) `find . -name "#*#"` # what is this for?? $(RM) `find . -name ".\#*"` clobber: tidy $(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile privoxy.log core *.tar.gz *.tar privoxy-cl.spec doc/source/ldpOK.dsl # # FIXME: What is all this? # $(RM) cscope.* *.pdb *.lib *.exp distclean: clobber tags: $(SRCS) $(HDRS) etags $(SRCS) $(HDRS) install: all # # FIXME: This is a dirty hack to have an install target # that works at least for some setups. This needs # to be fixed! # $(STRIP_PROG) $(PROGRAM) $(INSTALL) $(INSTALL_D) $(SBIN_DEST) $(INSTALL) $(INSTALL_D) $(DEST)/user-manual $(INSTALL) $(INSTALL_D) $(CONFDEST)/templates $(INSTALL) $(INSTALL_D) $(DEST)/$(DOK_WEB_USEM) $(INSTALL) $(INSTALL_P) $(PROGRAM) $(SBIN_DEST) if [ -d "$(DOK_WEB_USEM)" ]; then $(INSTALL) $(INSTALL_T) $(DOK_WEB_USEM)/[a-z]* $(DEST)/$(DOK_WEB_USEM); fi $(INSTALL) $(INSTALL_T) templates/[a-z]* $(CONFDEST)/templates $(INSTALL) $(INSTALL_T) config default.action default.filter trust $(CONFDEST) # FIXME $(ECHO) privoxy.logrotate privoxy.monthly privoxy.weekly # FIXME: Need new manual! $(GZIP_PROG) -c privoxy.1 > $(MAN_DEST)/privoxy.1.gz $(INSTALL) $(INSTALL_P) privoxy.init /etc/init.d/privoxy ############################################################################# ## Local Variables: ## tab-width: 3 ## end: # $Log: GNUmakefile.in,v $ # Revision 1.96 2002/04/27 17:44:32 morcego # - Correcting typo in my name (Rodrigo, not Rodgrigo) :-) # - Using the RM macro everywhere rm is called (either we use, or don't) # - Same for RPM # # Revision 1.95 2002/04/27 15:37:25 swa # replacing directory in document creation process # no longer necessary. # # Revision 1.94 2002/04/27 08:23:29 swa # pdf process reviewed and cleaned up # # Revision 1.93 2002/04/27 04:55:53 morcego # privoxy-cl.spec now gets removed by clobber target # # Revision 1.92 2002/04/27 04:53:40 morcego # Adding --exclude "PACKAGERS" to every tar command that applies (not for # webserver target) # # Revision 1.91 2002/04/27 04:44:51 morcego # GNUmakefile.in: The tarball created on redhat-dist and suse-dist now ignore # the PACKAGERS file, as well privoxy-cl.spec (in case it was created) # GNUmakefile.in: New targets -> conectiva-spec, conectiva-dist and # conectiva-upload # genclspec.sh : New file to generate, from privoxy-rh.spec, a specfile # for Conectiva Linux # # Revision 1.90 2002/04/26 17:46:53 swa # be consistent # # Revision 1.89 2002/04/26 17:20:54 swa # just produce single html files to proces them later with Destiller or somesuch. looks prettier. # # Revision 1.88 2002/04/25 19:13:57 morcego # Removed RPM release number declaration on configure.in # Changed makefile to use given value for RPM_PACKAGEV when on uploading # targets (will produce an error, explaining who to do it, if no value # if provided). # # Revision 1.87 2002/04/23 14:10:59 swa # now create pdf documents # # Revision 1.86 2002/04/15 04:30:27 hal9 # Missed two -pi.bak's on perl/cygwin problem. # # Revision 1.85 2002/04/14 01:05:34 hal9 # Revert dok-webserver change for SF logo. # # Revision 1.84 2002/04/13 22:43:25 hal9 # -Fix dok-webserver for SF logo (more perl). # -Change all perl -pi to perl -pi.bak for Cygwin problem. # # Revision 1.83 2002/04/12 09:39:25 oes # Excluding yet more files from tarball; making dist warning yet more scary # # Revision 1.82 2002/04/11 21:07:11 oes # Excluding more files from tarball build # # Revision 1.81 2002/04/11 14:40:27 oes # Fixed typo -- Thanks, Moritz! # # Revision 1.80 2002/04/11 12:50:00 oes # Fixed tarball-dist target # # Revision 1.79 2002/04/11 06:49:28 oes # webserver target: silenced timestamp warnings resulting from uploading westwards, made permissions fixing independant of screwed local dir permissions, suppress (false alarm) make error if not owner of feedback log # # Revision 1.78 2002/04/09 13:37:11 sarantis # fix tar options typo # # Revision 1.77 2002/04/09 13:28:53 swa # build suse and gen-dist with html docs # # Revision 1.76 2002/04/08 22:43:41 oes # Fix: Include dotfiles in fixing webserver permissions # # Revision 1.75 2002/04/08 22:14:59 oes # Silencing tar warnings in the web* targets # # Revision 1.74 2002/04/08 15:22:44 hal9 # This has finishing touches for dok building. Should be ready to go. # -The main doc build is now 'make dok', should work on Redhat too. # -Removed man page from main doc build. It is built separately due to # perl scripts that most aren't likely to have. # # Revision 1.73 2002/04/08 14:03:24 oes # oes for al: Fix install target # # Revision 1.72 2002/04/08 13:42:11 oes # Added safety check to *-dist targets; fixed permissions for feedback logfile # # Revision 1.71 2002/04/07 20:32:03 hal9 # -Add meta data kludge for make dok-webserver via $(PERL). # -Add subdirs for 'make dok-release'. # # Revision 1.70 2002/04/07 08:59:40 swa # generated files. do NOT edit. # fixed directory bug in makefile. # # Revision 1.69 2002/04/07 08:10:47 swa # create some of the webserver docs # automatically (in particular if # those docs recycle other documentation # fragments). Now committed webserver's # index file. # # Revision 1.68 2002/04/07 07:58:11 swa # create some of the webserver docs # automatically (in particular if # those docs recycle other documentation # fragments) # # Revision 1.67 2002/04/07 05:31:42 hal9 # Add 'dok-release' target: # -Set doc entities to VERSION and CODE_STATUS during make. # -Set doc conditional content flags (stable vs non-stable). # A separate target for the time being but needs to be incorporated into # dok build at some point. # -Filter out a spurious ^G from new man page > html converion in man2html. # # Revision 1.66 2002/04/06 20:28:21 jongfoster # Prettifying groff2html. # Using GNU Make's conditional makefile feature rather than shell "if"s. # (The shell "if"s were hiding errors) # "perl" -> "$(PERL)" # Spaces->tabs in a couple of places. # # Revision 1.65 2002/04/06 05:16:39 hal9 # -Add 'authors' and 'man' targets for AUTHORS and man-page (WIP). # -Both of these will soon be generated files. # # Revision 1.64 2002/04/04 22:14:51 oes # No longer rely on find honoring -iname # # Revision 1.63 2002/04/04 21:06:22 swa # cosmetics. # # Revision 1.62 2002/04/04 20:49:50 swa # attempt to consolidate the # different dokbook versions. # # Revision 1.61 2002/04/04 19:18:21 swa # readme was leftover directory. use w3m instead # of lynx to be consistent among developers. use # consistent target naming. # # Revision 1.60 2002/04/04 12:25:41 oes # Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions # # Revision 1.59 2002/04/04 08:32:45 swa # wrong name for tarball-dist target. further fixed content of tarball dist # # Revision 1.58 2002/04/04 06:32:58 hal9 # New dok targets for make readme. # # Revision 1.57 2002/04/04 00:36:36 gliptak # always use pcre for matching # # Revision 1.56 2002/04/03 22:28:03 gliptak # Removed references to gnu_regex # # Revision 1.55 2002/04/03 19:54:29 swa # freebsd tested to work. attempt to move tarball dist target forward # # Revision 1.54 2002/04/03 14:54:07 oes # Standard clean and clobber semantics II # # Revision 1.53 2002/04/03 14:19:16 oes # Standard clean and clobber semantics # # Revision 1.52 2002/04/03 02:56:18 hal9 # Revert previous FAQ numbering kludge. # # Revision 1.51 2002/04/02 13:03:56 oes # Added fix for webserver permissions # # Revision 1.50 2002/04/02 03:46:24 hal9 # Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort # to make the Table of Contents not so 'busy' looking. SuSE needs testing :) # # Revision 1.49 2002/03/30 22:20:12 swa # cd didn't work. neither did find. # # Revision 1.48 2002/03/30 19:04:06 swa # people release differently. no good. # I want to make parts of the docs only. # # Revision 1.47 2002/03/30 09:05:21 swa # better packaging. better rpm building. # tar failed on sun (no exclude there). # # Revision 1.46 2002/03/29 20:09:01 swa # al's patch # # Revision 1.45 2002/03/29 19:45:45 swa # for lazy swa # # Revision 1.44 2002/03/29 17:42:44 gliptak # Correcting for Solaris tar limitations # # Revision 1.43 2002/03/29 07:40:03 swa # fixed make webserver. doh # # Revision 1.42 2002/03/29 06:59:04 swa # other users could not modify files on webserver # # Revision 1.41 2002/03/28 20:43:00 swa # set make correctly # # Revision 1.40 2002/03/28 04:22:44 hal9 # More on man2html stuff. # # Revision 1.39 2002/03/28 01:04:14 hal9 # More man2html stuff for docs. # # Revision 1.38 2002/03/27 16:02:30 swa # have a generic target # # Revision 1.37 2002/03/27 15:30:26 swa # have a consistent appearance # # Revision 1.36 2002/03/27 14:58:08 swa # can be used by mutilple targets # # Revision 1.35 2002/03/27 14:53:19 swa # added solaris-dist # # Revision 1.34 2002/03/27 10:30:11 swa # we want a html man file on the webserver # # Revision 1.33 2002/03/27 03:05:35 hal9 # Added man2html target for docs (redhat-dok only for now) # # Revision 1.32 2002/03/26 22:29:54 swa # we have a new homepage! # # Revision 1.31 2002/03/26 14:00:18 swa # fixed make tarball, tarball-dist, tarball-clean # # Revision 1.30 2002/03/25 12:52:25 swa # new targets # # Revision 1.29 2002/03/24 17:03:55 jongfoster # Name change # # Revision 1.28 2002/03/24 16:19:48 swa # configure needs to be generated. # # Revision 1.27 2002/03/24 16:13:57 swa # generated files are a nono in cvs # # Revision 1.26 2002/03/24 15:36:02 swa # did not build. # # Revision 1.25 2002/03/24 14:31:08 swa # remove more crappy files. set RPM # release version correctly. # # Revision 1.24 2002/03/24 14:19:55 swa # set rpm package release in configure.in. nowhere else. # # Revision 1.23 2002/03/24 13:06:49 swa # suse-clean now runs fine # # Revision 1.22 2002/03/24 12:56:21 swa # name change related issues. # # Revision 1.21 2002/03/24 12:43:57 swa # name change # # Revision 1.20 2002/03/24 11:39:17 jongfoster # Renaming config files # # Revision 1.19 2002/03/22 20:53:03 morcego # - Ongoing process to change name to JunkbusterNG # - configure/configure.in: no change needed # - GNUmakefile.in: # - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz # - PROGRAM = jbng@EXEEXT@ # - rh-spec now references as junkbusterng-rh.spec # - redhat-upload: references changed to junkbusterng-* (package names) # - tarball-dist: references changed to JunkbusterNG-distribution-* # - tarball-src: now JunkbusterNG-* # - install: initscript now junkbusterng.init and junkbusterng (when # installed) # - junkbuster-rh.spec: renamed to junkbusterng-rh.spec # - junkbusterng.spec: # - References to the expression ijb where changed where possible # - New package name: junkbusterng (all in lower case, acording to # the LSB recomendation) # - Version changed to: 2.9.13 # - Release: 1 # - Added: junkbuster to obsoletes and conflicts (Not sure this is # right. If it obsoletes, why conflict ? Have to check it later) # - Summary changed: Stefan, please check and aprove it # - Changes description to use the new name # - Sed string was NOT changed. Have to wait to the manpage to # change first # - Keeping the user junkbuster for now. It will require some aditional # changes on the script (scheduled for the next specfile release) # - Added post entry to move the old logfile to the new log directory # - Removing "chkconfig --add" entry (not good to have it automaticaly # added to the startup list). # - Added preun section to stop the service with the old name, as well # as remove it from the startup list # - Removed the chkconfig --del entry from the conditional block on # the preun scriptlet (now handled on the %files section) # - junkbuster.init: renamed to junkbusterng.init # - junkbusterng.init: # - Changed JB_BIN to jbng # - Created JB_OBIN with the old value of JB_BIN (junkbuster), to # be used where necessary (config dir) # # Aditional notes: # - The config directory is /etc/junkbuster yet. Have to change it on the # specfile, after it is changes on the code # - The only files that got renamed on the cvs tree were the rh specfile and # the init file. Some file references got changes on the makefile and on the # rh-spec (as listed above) # # Revision 1.18 2002/03/21 23:00:00 swa # want to autogenerate stuff. # # Revision 1.17 2002/03/19 19:30:04 morcego # - Fixing stylesheet checking on configure. If it is found, no further checks # should be done # # - configure will now check for db2html or docbook2html (should work now # on SuSe without the docbktls package) # # Revision 1.16 2002/03/14 22:32:32 hal9 # Bumped the RPM version. # # Revision 1.15 2002/03/08 20:00:28 swa # some leftovers. # # Revision 1.14 2002/03/07 18:25:56 swa # synced redhat and suse build process # # Revision 1.13 2002/03/07 17:17:56 oes # (Hopefully) fixed for older make versions # # Revision 1.12 2002/03/07 15:28:27 swa # more informative # # Revision 1.11 2002/03/06 14:33:18 sarantis # Use proper temp file, not "abc". # # Revision 1.10 2002/03/06 14:19:35 sarantis # Cleanup PID_FILE_PATH from redhat-dist target # # Revision 1.9 2002/03/05 17:31:11 morcego # Search for docbook.dsl. Should solve portability problems for SuSe. # # Revision 1.8 2002/03/05 14:07:42 morcego # configure now detects rpm topdir, and change GNUmakefile acordingly # (based on sugestion by Sarantis Paskalis) # # Revision 1.7 2002/03/05 13:43:28 morcego # Checking for text browser, so redhat-dok can work. # # Revision 1.6 2002/03/05 13:10:51 morcego # Changes to implement redhat-dok (Hal Burgiss) # Changes to make it work on other distros and out-of-the-shelf configurations # # Revision 1.5 2002/02/27 15:30:39 hal9 # Reset $(RPM_PACKAGEV) to 1 (was 2) # # Revision 1.4 2002/01/17 21:44:04 jongfoster # Adding urlmatch.[ch] # # Revision 1.3 2002/01/04 15:26:08 oes # Added tarball-src target # # Revision 1.2 2001/12/30 14:07:31 steudten # - Add signal handling (unix) # - Add SIGHUP handler (unix) # - Add creation of pidfile (unix) # - Add action 'top' in rc file (RH) # - Add entry 'SIGNALS' to manpage # - Add exit message to logfile (unix) # # Revision 1.1 2001/12/01 11:22:57 jongfoster # Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of # make break in a more obvious way. # Adding .PHONY section. # # Revision 1.40 2001/12/01 00:24:11 jongfoster # Renaming various config files # Fixing CR->CRLF under Win32 (I hope) # # Revision 1.39 2001/11/06 12:07:30 steudten # Add --clean for building rpm in target redhat-dist. # # Revision 1.38 2001/11/05 21:35:23 steudten # Complete rewrite for the 'redhat-dist' target. # Checks for writeable RPM build directories for calling user. # So you must not be root, just set the modes to 1777 to # build a RH package. # Fix the upload-target to be arch independant. # Add target for 'solaris-dist' - coming soon. # # Revision 1.37 2001/11/01 00:52:04 hal9 # Redhat-upload stuff per Stefan. # # Revision 1.36 2001/10/31 19:26:13 swa # automate process of uploading new releases # to sf. # # Revision 1.35 2001/10/15 22:14:59 joergs # Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in # the general CFLAGS already. # # Revision 1.34 2001/10/15 18:28:06 steudten # remove config.cache for target clobber. # Cleanup make dist for RH and S.u.S.E. # # Revision 1.33 2001/10/10 12:43:33 oes # Added ugly hack to make install target work at least for some setups. # # Revision 1.32 2001/10/09 22:38:19 jongfoster # Correcting actionsfile filename for Win32 INI build # # Revision 1.31 2001/09/23 10:13:48 swa # upload process established. run make webserver and # the documentation is moved to the webserver. documents # are now linked correctly. # # Revision 1.30 2001/09/19 17:55:49 oes # Fixed CFLAGS # # Revision 1.29 2001/09/16 17:34:27 jongfoster # Removing showargs.[ch], adding cgi(simple|edit).[ch] # Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source # of build problems. # # Revision 1.28 2001/09/13 15:19:08 swa # we want text files as well. # # Revision 1.27 2001/09/13 13:11:37 steudten # # Replace DEBUG_CFLAGS with OTHER_CFLAGS # # Revision 1.26 2001/09/12 23:44:54 david__schmidt # Mac OSX (Darwin) support added. # # Revision 1.25 2001/09/12 22:55:45 joergs # AmigaOS support added. # # Revision 1.24 2001/09/12 17:28:59 david__schmidt # # OS/2 port: update autoconf'd support for the platform. # # Revision 1.23 2001/09/12 16:28:42 swa # added "make dok" section to generate html pages from # the sgml source documents. note that the we do not want # generated stuff in cvs. # # Revision 1.22 2001/09/10 16:31:23 swa # buildroot definition in the specfile fucks up the build # process under suse. hence I moved it to the "rpm -ta" # command # # Revision 1.21 2001/09/10 11:12:49 oes # Turning on -Wall # # Revision 1.20 2001/08/02 22:04:29 jongfoster # Removing some remaining references to obsolete w32rulesdlg.[ch] # # Revision 1.19 2001/07/30 22:14:03 jongfoster # Removing obsolete w32rulesdlg.c and w32rulesdlg.h # # Revision 1.18 2001/07/29 17:09:17 jongfoster # Major changes to build system in order to fix these bugs: # - pthreads under Linux was broken - changed -lpthread to -pthread # - Compiling in MinGW32 mode under CygWin now correctly detects # which shared libraries are available # - Solaris support (?) (Not tested under Solaris yet) # # Revision 1.17 2001/07/28 16:44:54 oes # Fixed sed LF->CRLF conversion and removed deprecated files # # Revision 1.16 2001/07/15 19:45:33 jongfoster # Added support for linking with POSIX threads library # # Revision 1.15 2001/07/13 13:48:07 oes # - Moved STATIC #define for pcre to (ac)config.h # - Made -Ipcre depandant on static pcre compilation to # avoid version conflicts # - Included compilation and depandancies for new deanimate.c # - Made changes to the pcre/pcreposix/pcrs build process # as required by the new library autodetection in # configure.in # # Revision 1.14 2001/07/01 16:27:44 oes # Fixed misplaced dependancy # # Revision 1.13 2001/06/29 13:18:36 oes # - added depandancy of filters.o on cgi.h # # Revision 1.12 2001/06/12 17:15:56 swa # fixes, because a clean build on rh6.1 was impossible. # GZIP confuses make, %configure confuses rpm, etc. # # Revision 1.11 2001/06/11 11:26:35 sarantis # RPM version should be the same as ijbswa version. The rpm release is # specified in the specfile. # # Revision 1.10 2001/06/07 17:27:45 swa # added suse build section # # Revision 1.9 2001/06/04 18:31:58 swa # files are now prefixed with either `confdir' or `logdir'. # `make redhat-dist' replaces both entries confdir and logdir # with redhat values # # Revision 1.8 2001/06/04 10:44:57 swa # `make redhatr-dist' now works. Except for the paths # in the config file. # # Revision 1.7 2001/06/03 17:09:09 swa # swa for oes: reversed my earlier change # # Revision 1.6 2001/06/03 17:07:27 swa # swa for oes # # Revision 1.5 2001/06/03 13:57:26 swa # compile cgi.c (for andreas' GUI) # # Revision 1.4 2001/05/31 21:18:45 jongfoster # Added files actions.[ch], actionlist.h, list.[ch] to Makefile # # Revision 1.3 2001/05/29 20:02:48 joergs # Changes for AmigaOS added. # # Revision 1.2 2001/05/17 22:23:23 oes # - Added auto-generation of CRLFs for Win32 config files # - Added comment-prefix to all Win32-only options in the config file # and provided auto stripping of this prefix for the Win32 platform by make # # Revision 1.1.1.1 2001/05/15 13:59:00 oes # Initial import of version 2.9.3 source tree # #