Re-commit to fix various minor issues for new release.

[privoxy.git] / doc / text / faq.txt

Privoxy Frequently Asked Questions

[ Copyright   2001-2008 by Privoxy Developers ]

$Id: faq.sgml,v 2.37 2008/01/19 15:03:05 hal9 Exp $

This FAQ gives quick answers to frequently asked questions about Privoxy. It is
not a substitute for the Privoxy User Manual.

What is Privoxy?

Privoxy is a non-caching web proxy with advanced filtering capabilities for
enhancing privacy, modifying web page data, managing HTTP cookies, controlling
access, and removing ads, banners, pop-ups and other obnoxious Internet junk.
Privoxy has a flexible configuration and can be customized to suit individual
needs and tastes. Privoxy has application for both stand-alone systems and
multi-user networks.

Privoxy is based on Internet Junkbuster (tm).

Please note that this document is a work in progress. This copy represents the
state at the release of version 3.0.8. You can find the latest version of the
document at http://www.privoxy.org/faq/. Please see the Contact section if you
want to contact the developers.

-------------------------------------------------------------------------------

Table of Contents
1. General Information

    1.1. Who should give Privoxy a try?
    1.2. Is Privoxy the best choice for me?
    1.3. What is a "proxy"? How does Privoxy work?
    1.4. Does Privoxy do anything more than ad blocking?
    1.5. What is this new version of "Junkbuster"?
    1.6. Why "Privoxy"? Why change the name from Junkbuster at all?
    1.7. How does Privoxy differ from the old Junkbuster?
    1.8. How does Privoxy know what is an ad, and what is not?
    1.9. Can Privoxy make mistakes? This does not sound very scientific.
    1.10. Will I have to configure Privoxy before I can use it?
    1.11. Can Privoxy run as a server on a network?
    1.12. My browser does the same things as Privoxy. Why should I use Privoxy
        at all?
    1.13. Why should I trust Privoxy?
    1.14. Is there is a license or fee? What about a warranty? Registration?
    1.15. Can Privoxy remove spyware? Adware? Viruses?
    1.16. Can I use Privoxy with other ad-blocking software?
    1.17. I would like to help you, what can I do?

        1.17.1. Would you like to participate?
        1.17.2. Contribute!
        1.17.3. Software

2. Installation

    2.1. Which browsers are supported by Privoxy?
    2.2. Which operating systems are supported?
    2.3. Can I use Privoxy with my email client?
    2.4. I just installed Privoxy. Is there anything special I have to do now?
    2.5. What is the proxy address of Privoxy?
    2.6. I just installed Privoxy, and nothing is happening. All the ads are
        there. What's wrong?
    2.7. I get a "Privoxy is not being used" dummy page although Privoxy is
        running and being used.

3. Configuration

    3.1. What exactly is an "actions" file?
    3.2. The "actions" concept confuses me. Please list some of these
        "actions".
    3.3. How are actions files configured? What is the easiest way to do this?
    3.4. There are several different "actions" files. What are the differences?
    3.5. Where can I get updated Actions Files?
    3.6. Can I use my old config files?
    3.7. Why is the configuration so complicated?
    3.8. How can I make my Yahoo/Hotmail/Gmail account work?
    3.9. What's the difference between the "Cautious", "Medium" and "Advanced"
        defaults?
    3.10. Why can I change the configuration with a browser? Does that not
        raise security issues?
    3.11. What is the default.filter file? What is a "filter"?
    3.12. How can I set up Privoxy to act as a proxy for my LAN?
    3.13. Instead of ads, now I get a checkerboard pattern. I don't want to see
        anything.
    3.14. Why would anybody want to see a checkerboard pattern?
    3.15. I see some images being replaced with text instead of the
        checkerboard image. Why and how do I get rid of this?
    3.16. Can Privoxy run as a service on Win2K/NT/XP?
    3.17. How can I make Privoxy work with other proxies like Squid or Tor?
    3.18. Can I just set Privoxy to use port 80 and thus avoid individual
        browser configuration?
    3.19. Can Privoxy run as a "transparent" proxy?
    3.20. Can Privoxy run as a "intercepting" proxy?
    3.21. How can I configure Privoxy for use with Outlook Express?
    3.22. How can I have separate rules just for HTML mail?
    3.23. I sometimes notice cookies sneaking through. How?
    3.24. Are all cookies bad? Why?
    3.25. How can I allow permanent cookies for my trusted sites?
    3.26. Can I have separate configurations for different users?
    3.27. Can I set-up Privoxy as a whitelist of "good" sites?
    3.28. How can I turn off ad-blocking?
    3.29. How can I have custom template pages, like the BLOCKED page?
    3.30. How can I remove the "Go There Anyway" link from the BLOCKED page?

4. Miscellaneous

    4.1. How much does Privoxy slow my browsing down? This has to add extra
        time to browsing.
    4.2. I notice considerable delays in page requests. What's wrong?
    4.3. What are "http://config.privoxy.org/" and "http://p.p/"?
    4.4. How can I submit new ads, or report problems?
    4.5. If I do submit missed ads, will they be included in future updates?
    4.6. Why doesn't anyone answer my support request?
    4.7. How can I hide my IP address?
    4.8. Can Privoxy guarantee I am anonymous?
    4.9. A test site says I am not using a Proxy.
    4.10. How do I use Privoxy together with Tor?
    4.11. Might some things break because header information or content is
        being altered?
    4.12. Can Privoxy act as a "caching" proxy to speed up web browsing?
    4.13. What about as a firewall? Can Privoxy protect me?
    4.14. I have large empty spaces / a checkerboard pattern now where ads used
        to be. Why?
    4.15. How can Privoxy filter Secure (HTTPS) URLs?
    4.16. Privoxy runs as a "server". How secure is it? Do I need to take any
        special precautions?
    4.17. Can I temporarily disable Privoxy?
    4.18. When "disabled" is Privoxy totally out of the picture?
    4.19. How can I tell Privoxy to totally ignore certain sites?
    4.20. My logs show Privoxy "crunches" ads, but also its own internal CGI
        pages. What is a "crunch"?
    4.21. Can Privoxy effect files that I download from a webserver? FTP
        server?
    4.22. I just downloaded a Perl script, and Privoxy altered it! Yikes, what
        is wrong!
    4.23. Should I continue to use a "HOSTS" file for ad-blocking?
    4.24. Where can I find more information about Privoxy and related issues?
    4.25. I've noticed that Privoxy changes "Microsoft" to "MicroSuck"! Why are
        you manipulating my browsing?
    4.26. Does Privoxy produce "valid" HTML (or XHTML)?

5. Troubleshooting

    5.1. I cannot connect to any websites. Or, I am getting "connection
        refused" message with every web page. Why?
    5.2. Why am I getting a 503 Error (WSAECONNREFUSED) on every page?
    5.3. I just added a new rule, but the steenkin ad is still getting through.
        How?
    5.4. One of my favorite sites does not work with Privoxy. What can I do?
    5.5. After installing Privoxy, I have to log in every time I start IE. What
        gives?
    5.6. I cannot connect to any FTP sites. Privoxy is blocking me.
    5.7. In Mac OSX, I can't configure Microsoft Internet Explorer to use
        Privoxy as the HTTP proxy.
    5.8. In Mac OSX, I dragged the Privoxy folder to the trash in order to
        uninstall it. Now the finder tells me I don't have sufficient
        privileges to empty the trash.
    5.9. In Mac OSX Panther (10.3), images often fail to load and/or I
        experience random delays in page loading. I'm using localhost as my
        browser's proxy setting.
    5.10. I get a completely blank page at one site. "View Source" shows only:
        <html><body></body></html>. Without Privoxy the page loads fine.
    5.11. My logs show many "Unable to get my own hostname" lines. Why?
    5.12. When I try to launch Privoxy, I get an error message "port 8118 is
        already in use" (or similar wording). Why?
    5.13. Pages with UTF-8 fonts are garbled.
    5.14. Why are binary files (such as images) corrupted when Privoxy is used?
    5.15. What is the "demoronizer" and why is it there?
    5.16. Why do I keep seeing "PrivoxyWindowOpen()" in raw source code?
    5.17. I am getting too many DNS errors like "404 No Such Domain". Why can't
        Privoxy do this better?
    5.18. At one site Privoxy just hangs, and starts taking all CPU. Why is
        this?
    5.19. I just installed Privoxy, and all my browsing has slowed to a crawl.
        What gives?
    5.20. Why do my filters work on some sites but not on others?

6. Contacting the developers, Bug Reporting and Feature Requests

    6.1. Get Support
    6.2. Reporting Problems

        6.2.1. Reporting Ads or Other Configuration Problems
        6.2.2. Reporting Bugs

    6.3. Request New Features
    6.4. Other

7. Privoxy Copyright, License and History

    7.1. License
    7.2. History

1. General Information

1.1. Who should give Privoxy a try?

Anyone who is interested in security, privacy, or in finer-grained control over
their web and Internet experience.

-------------------------------------------------------------------------------

1.2. Is Privoxy the best choice for me?

Privoxy is certainly a good choice, especially for those who want more control
and security. Those with the willingness to read the documentation and the
ability to fine-tune their installation will benefit the most.

One of Privoxy's strengths is that it is highly configurable giving you the
ability to completely personalize your installation. Being familiar with, or at
least having an interest in learning about HTTP and other networking protocols,
HTML, and "Regular Expressions" will be a big plus and will help you get the
most out of Privoxy. A new installation just includes a very basic
configuration. The user should take this as a starting point only, and enhance
it as he or she sees fit. In fact, the user is encouraged, and expected to,
fine-tune the configuration.

Much of Privoxy's configuration can be done with a Web browser. But there are
areas where configuration is done using a text editor to edit configuration
files. Also note that the web-based action editor doesn't use authentication
and should only be enabled in environments where all clients with access to
Privoxy listening port can be trusted.

-------------------------------------------------------------------------------

1.3. What is a "proxy"? How does Privoxy work?

A web proxy is a service, based on a software such as Privoxy, that clients
(i.e. browsers) can use instead of connecting directly to web servers on the
Internet. The clients then ask the proxy to fetch the objects they need (web
pages, images, movies etc) on their behalf, and when the proxy has done so, it
hands the results back to the client. It is a "go-between". See the Wikipedia
proxy definition for more.

There are many reasons to use web proxies, such as security (firewalling),
efficiency (caching) and others, and there are any number of proxies to
accommodate those needs.

Privoxy is a proxy that is primarily focused on privacy protection, ad and junk
elimination and freeing the user from restrictions placed on his activities.
Sitting between your browser(s) and the Internet, it is in a perfect position
to filter outbound personal information that your browser is leaking, as well
as inbound junk. It uses a variety of techniques to do this, all of which are
under your complete control via the various configuration files and options.
Being a proxy also makes it easier to share configurations among multiple
browsers and/or users.

-------------------------------------------------------------------------------

1.4. Does Privoxy do anything more than ad blocking?

Yes, ad blocking is but one possible use. There are many, many ways Privoxy can
be used to sanitize and customize web browsing.

-------------------------------------------------------------------------------

1.5. What is this new version of "Junkbuster"?

A long time ago, there was the Internet Junkbuster, by Anonymous Coders and
Junkbusters Corporation. This saved many users a lot of pain in the early days
of web advertising and user tracking.

But the web, its protocols and standards, and with it, the techniques for
forcing ads on users, give up autonomy over their browsing, and for tracking
them, keeps evolving. Unfortunately, the Internet Junkbuster did not. Version
2.0.2, published in 1998, was (and is) the last official release available from
Junkbusters Corporation. Fortunately, it had been released under the GNU GPL,
which allowed further development by others.

So Stefan Waldherr started maintaining an improved version of the software, to
which eventually a number of people contributed patches. It could already
replace banners with a transparent image, and had a first version of pop-up
killing, but it was still very closely based on the original, with all its
limitations, such as the lack of HTTP/1.1 support, flexible per-site
configuration, or content modification. The last release from this effort was
version 2.0.2-10, published in 2000.

Then, some developers picked up the thread, and started turning the software
inside out, upside down, and then reassembled it, adding many new features
along the way.

The result of this is Privoxy, whose first stable version, 3.0, was released
August, 2002.

-------------------------------------------------------------------------------

1.6. Why "Privoxy"? Why change the name from Junkbuster at all?

Though outdated, Junkbusters Corporation continues to offer their original
version of the Internet Junkbuster, so publishing our Junkbuster-derived
software under the same name led to confusion.

There are also potential legal complications from our use of the Junkbuster
name, which is a registered trademark of Junkbusters Corporation. There are,
however, no objections from Junkbusters Corporation to the Privoxy project
itself, and they, in fact, still share our ideals and goals.

The developers also believed that there are so many improvements over the
original code, that it was time to make a clean break from the past and make a
name in their own right.

Privoxy is the "Privacy Enhancing Proxy". Also, its content modification and
junk suppression gives you, the user, more control, more freedom, and allows
you to browse your personal and "private edition" of the web.

-------------------------------------------------------------------------------

1.7. How does Privoxy differ from the old Junkbuster?

Privoxy picks up where Junkbuster left off. All the old features remain. The
new Privoxy still blocks ads and banners, still manages cookies, and still
helps protect your privacy. But, most of these features have been enhanced, and
many new ones have been added, all in the same vein.

Privoxy's new features include:

  * Can be run as an "intercepting" proxy, which obviates the need to configure
    browsers individually.

  * Sophisticated actions and filters for manipulating both server and client
    headers.

  * Can be chained with other proxies.

  * Integrated browser based configuration and control utility at http://
    config.privoxy.org/ (shortcut: http://p.p/). Browser-based tracing of rule
    and filter effects. Remote toggling.

  * Web page filtering (text replacements, removes banners based on size,
    invisible "web-bugs", JavaScript and HTML annoyances, pop-up windows, etc.)

  * Modularized configuration that allows for standard settings and user
    settings to reside in separate files, so that installing updated actions
    files won't overwrite individual user settings.

  * Support for Perl Compatible Regular Expressions in the configuration files,
    and a more sophisticated and flexible configuration syntax.

  * Improved cookie management features (e.g. session based cookies).

  * GIF de-animation.

  * Bypass many click-tracking scripts (avoids script redirection).

  * Multi-threaded (POSIX and native threads).

  * User-customizable HTML templates for all proxy-generated pages (e.g.
    "blocked" page).

  * Auto-detection and re-reading of config file changes.

  * Improved signal handling, and a true daemon mode (Unix).

  * Every feature now controllable on a per-site or per-location basis,
    configuration more powerful and versatile over-all.

  * Many smaller new features added, limitations and bugs removed, and security
    holes fixed.

-------------------------------------------------------------------------------

1.8. How does Privoxy know what is an ad, and what is not?

Privoxy's approach to blocking ads is twofold:

First, there are certain patterns in the locations (URLs) of banner images.
This applies to both the path (you wouldn't guess how many web sites serve
their banners from a directory called "banners"!) and the host (blocking the
big banner hosting services like doublecklick.net already helps a lot). Privoxy
takes advantage of this fact by using URL patterns to sort out and block the
requests for things that sound like they would be ads or banners.

Second, banners tend to come in certain sizes. But you can't tell the size of
an image by its URL without downloading it, and if you do, it's too late to
save bandwidth. Therefore, Privoxy also inspects the HTML sources of web pages
while they are loaded, and replaces references to images with standard banner
sizes by dummy references, so that your browser doesn't request them anymore in
the first place.

Both of this involves a certain amount of guesswork and is, of course, freely
and readily configurable.

-------------------------------------------------------------------------------

1.9. Can Privoxy make mistakes? This does not sound very scientific.

Actually, it's a black art ;-) And yes, it is always possible to have a broad
rule accidentally block or change something by mistake. You will almost surely
run into such situations at some point. It is tricky writing rules to cover
every conceivable possibility, and not occasionally get false positives.

But this should not be a big concern since the Privoxy configuration is very
flexible, and includes tools to help identify these types of situations so they
can be addressed as needed, allowing you to customize your installation. (See
the Troubleshooting section below.)

-------------------------------------------------------------------------------

1.10. Will I have to configure Privoxy before I can use it?

That depends on your expectations. The default installation should give you a
good starting point, and block most ads and unwanted content, but many of the
more advanced features are off by default, and require you to activate them.

You do have to set up your browser to use Privoxy (see the Installation section
below).

And you will certainly run into situations where there are false positives, or
ads not being blocked that you may not want to see. In these cases, you would
certainly benefit by customizing Privoxy's configuration to more closely match
your individual situation. And we encourage you to do this. This is where the
real power of Privoxy lies!

-------------------------------------------------------------------------------

1.11. Can Privoxy run as a server on a network?

Yes, Privoxy runs as a server already, and can easily be configured to "serve"
more than one client. See How can I set up Privoxy to act as a proxy for my LAN
below.

-------------------------------------------------------------------------------

1.12. My browser does the same things as Privoxy. Why should I use Privoxy at
all?

Modern browsers do indeed have some of the same functionality as Privoxy. Maybe
this is adequate for you. But Privoxy is very versatile and powerful, and can
probably do a number of things your browser just can't.

In addition, a proxy is good choice if you use multiple browsers, or have a LAN
with multiple computers since Privoxy can run as a server application. This way
all the configuration is in one place, and you don't have to maintain a similar
configuration for possibly many browsers or users.

Note, however, that it's recommended to leverage both your browser's and
Privoxy's privacy enhancing features at the same time. While your browser
probably lacks some features Privoxy offers, it should also be able to do some
things more reliable, for example restricting and suppressing JavaScript.

-------------------------------------------------------------------------------

1.13. Why should I trust Privoxy?

The most important reason is because you have access to everything, and you can
control everything. You can check every line of every configuration file
yourself. You can check every last bit of source code should you desire. And
even if you can't read code, there should be some comfort in knowing that other
people can, and do read it. You can build the software from scratch, if you
want, so that you know the executable is clean, and that it is yours. In fact,
we encourage this level of scrutiny. It is one reason we use Privoxy ourselves.

-------------------------------------------------------------------------------

1.14. Is there is a license or fee? What about a warranty? Registration?

Privoxy is free software and licensed under the GNU General Public License
(GPL) version 2. It is free to use, copy, modify or distribute as you wish
under the terms of this license. Please see the Copyright section for more
information on the license and copyright. Or the LICENSE file that should be
included.

There is no warranty of any kind, expressed, implied or otherwise. That is
something that would cost real money ;-) There is no registration either.

-------------------------------------------------------------------------------

1.15. Can Privoxy remove spyware? Adware? Viruses?

No, at least not reliably enough to trust it. Privoxy is not designed to be a
malware removal tool and the default configuration doesn't even try to filter
out any malware.

Privoxy could help prevent contact from (known) sites that use such tactics
with appropriate configuration rules, and thus could conceivably prevent
contamination from such sites. However, keeping such a configuration up to date
would require a lot of time and effort that would be better spend on keeping
your software itself up to date so it doesn't have known vulnerabilities.

-------------------------------------------------------------------------------

1.16. Can I use Privoxy with other ad-blocking software?

Privoxy should work fine with other proxies and other software in general.

But it is probably not necessary to use Privoxy in conjunction with other
ad-blocking products, and this could conceivably cause undesirable results. It
might be better to choose one software or the other and work a little to tweak
its configuration to your liking.

Note that this is an advice specific to ad blocking.

-------------------------------------------------------------------------------

1.17. I would like to help you, what can I do?

1.17.1. Would you like to participate?

Well, we always need help. There is something for everybody who wants to help
us. We welcome new developers, packagers, testers, documentation writers or
really anyone with a desire to help in any way. You DO NOT need to be a
"programmer". There are many other tasks available. In fact, the programmers
often can't spend as much time programming because of some of the other, more
mundane things that need to be done, like checking the Tracker feedback
sections.

So first thing, get an account on SourceForge.net and mail your id to the
developers mailing list. Then, please read the Developer's Manual, at least the
pertinent sections.

You can also start helping out without SourceForge.net account, simply by
showing up on the mailing list, helping out other users, providing general
feedback or reporting problems you noticed.

-------------------------------------------------------------------------------

1.17.2. Contribute!

We, of course, welcome donations and could use money for domain registering,
buying software to test Privoxy with, and, of course, for regular world-wide
get-togethers (hahaha). If you enjoy the software and feel like helping us with
a donation, just drop us a note and get your name on the list of contributors.

-------------------------------------------------------------------------------

1.17.3. Software

If you are a vendor of a web-related software like a browser, web server or
proxy, and would like us to ensure that Privoxy runs smoothly with your
product, you might consider supplying us with a copy or license. We can't,
however, guarantee that we will fix all potential compatibility issues as a
result.

-------------------------------------------------------------------------------

2. Installation

2.1. Which browsers are supported by Privoxy?

Any browser that can be configured to use a proxy, which should be virtually
all browsers, including Firefox, Internet Explorer, Opera, and Safari among
others. Direct browser support is not an absolute requirement since Privoxy
runs as a separate application and talks to the browser in the standardized
HTTP protocol, just like a web server does.

-------------------------------------------------------------------------------

2.2. Which operating systems are supported?

At present, Privoxy is known to run on Windows(95, 98, ME, 2000, XP, Vista),
GNU/Linux (RedHat, SuSE, Debian, Fedora, Gentoo, Slackware and others), Mac
OSX, OS/2, AmigaOS, FreeBSD, NetBSD, OpenBSD, Solaris, and various other
flavors of Unix.

But any operating system that runs TCP/IP, can conceivably take advantage of
Privoxy in a networked situation where Privoxy would run as a server on a LAN
gateway. Then only the "gateway" needs to be running one of the above operating
systems.

Source code is freely available, so porting to other operating systems is
always a possibility.

-------------------------------------------------------------------------------

2.3. Can I use Privoxy with my email client?

As long as there is some way to set a HTTP proxy for the client, then yes, any
application can be used, whether it is strictly speaking a "browser" or not.
Though this may not be the best approach for dealing with some of the common
abuses of HTML in email. See How can I configure Privoxy with Outlook Express?
below for more on this.

Be aware that HTML email presents a number of unique security and privacy
related issues, that can require advanced skills to overcome. The developers
recommend using email clients that can be configured to convert HTML to plain
text for these reasons.

-------------------------------------------------------------------------------

2.4. I just installed Privoxy. Is there anything special I have to do now?

All browsers should be told to use Privoxy as a proxy by specifying the correct
proxy address and port number in the appropriate configuration area for the
browser. It's possible to combine Privoxy with a packet filter to intercept
HTTP requests even if the client isn't explicitly configured to use Privoxy,
but where possible, configuring the client is recommended. See the User Manual
for more details. You should also flush your browser's memory and disk cache to
get rid of any cached junk items, and remove any stored cookies. 

-------------------------------------------------------------------------------

2.5. What is the proxy address of Privoxy?

If you set up the Privoxy to run on the computer you browse from (rather than
your ISP's server or some networked computer on a LAN), the proxy will be on
127.0.0.1 (sometimes referred to as "localhost", which is the special name used
by every computer on the Internet to refer to itself) and the port will be 8118
(unless you used the listen-address config option to tell Privoxy to run on a
different port).

When configuring your browser's proxy settings you typically enter the word
"localhost" or the IP address "127.0.0.1" in the boxes next to "HTTP" and
"Secure" (HTTPS) and then the number "8118" for "port". This tells your browser
to send all web requests to Privoxy instead of directly to the Internet.

Privoxy can also be used to proxy for a Local Area Network. In this case, your
would enter either the IP address of the LAN host where Privoxy is running, or
the equivalent hostname, e.g. 192.168.1.1. Port assignment would be same as
above. Note that Privoxy doesn't listen on any LAN interfaces by default.

Privoxy does not currently handle any other protocols such as FTP, SMTP, IM,
IRC, ICQ, etc.

-------------------------------------------------------------------------------

2.6. I just installed Privoxy, and nothing is happening. All the ads are there.
What's wrong?

Did you configure your browser to use Privoxy as a proxy? It does not sound
like it. See above. You might also try flushing the browser's caches to force a
full re-reading of pages. You can verify that Privoxy is running, and your
browser is correctly configured by entering the special URL: http://p.p/. This
should take you to a page titled "This is Privoxy.." with access to Privoxy's
internal configuration. If you see this, then you are good to go. If you
receive a page saying "Privoxy is not running", then the browser is not set up
to use your Privoxy installation. If you receive anything else (probably
nothing at all), it could either be that the browser is not set up correctly,
or that Privoxy is not running at all. Check the log file. For instructions on
starting Privoxy and browser configuration, see the chapter on starting Privoxy
in the User Manual.

-------------------------------------------------------------------------------

2.7. I get a "Privoxy is not being used" dummy page although Privoxy is running
and being used.

First, make sure that Privoxy is really running and being used by visiting
http://p.p/. You should see the Privoxy main page. If not, see the chapter on
starting Privoxy in the User Manual.

Now if http://p.p/ works for you, but other parts of Privoxy's web interface
show the dummy page, your browser has cached a redirection it encountered
before Privoxy was being used. You need to clear your browser's cache. Note
that shift-reloading the dummy page won't help, since that'll only refresh the
dummy page, not the redirection that lead you there.

The procedure for clearing the cache varies from browser to browser. For
example, Mozilla/Netscape users would click Edit --> Preferences --> Advanced
--> Cache and then click both "Clear Memory Cache" and "Clear Disk Cache". In
some Firefox versions it's Tools --> Options --> Privacy --> Cache and then
click "Clear Cache Now".

-------------------------------------------------------------------------------

3. Configuration

3.1. What exactly is an "actions" file?

Privoxy utilizes the concept of " actions" that are used to manipulate and
control web page data. Actions files are where these actions that Privoxy could
take while processing a certain request, are configured. Typically, you would
define a set of default actions that apply globally to all URLs, then add
exceptions to these defaults where needed. There is a wide array of actions
available that give the user a high degree of control and flexibility on how to
process each and every web page.

Actions can be defined on a URL pattern basis, i.e. for single URLs, whole web
sites, groups or parts thereof etc. Actions can also be grouped together and
then applied to requests matching one or more patterns. There are many possible
actions that might apply to any given site. As an example, if you are blocking
cookies as one of your default actions, but need to accept cookies from a given
site, you would need to define an exception for this site in one of your
actions files, preferably in user.action.

-------------------------------------------------------------------------------

3.2. The "actions" concept confuses me. Please list some of these "actions".

For a comprehensive discussion of the actions concept, please refer to the
actions file chapter in the User Manual. It includes a list of all actions and
an actions file tutorial to get you started.

-------------------------------------------------------------------------------

3.3. How are actions files configured? What is the easiest way to do this?

Actions files are just text files in a special syntax and can be edited with a
text editor. But probably the easiest way is to access Privoxy's user interface
with your web browser at http://config.privoxy.org/ (Shortcut: http://p.p/) and
then select "View & change the current configuration" from the menu. Note that
this feature must be explicitly enabled in the main config file (see
enable-edit-actions).

-------------------------------------------------------------------------------

3.4. There are several different "actions" files. What are the differences?

Three actions files are being included by the developers, to be used for
different purposes: These are default.action, the "main" actions file which is
actively maintained by the Privoxy developers and typically sets the default
policies, user.action, where users are encouraged to make their private
customizations, and standard.action, which is for internal Privoxy use only.
Please see the actions chapter in the User Manual for a more detailed
explanation.

Earlier versions included three different versions of the default.action file.
The new scheme allows for greater flexibility of local configuration, and for
browser based selection of pre-defined "aggressiveness" levels.

-------------------------------------------------------------------------------

3.5. Where can I get updated Actions Files?

Based on your feedback and the continuing development, updates of
default.action will be made available from time to time on the files section of
our project page.

If you wish to receive an email notification whenever we release updates of
Privoxy or the actions file, subscribe to our announce mailing list,
ijbswa-announce@lists.sourceforge.net.

-------------------------------------------------------------------------------

3.6. Can I use my old config files?

The syntax and purpose of configuration files has remained roughly the same
throughout the 3.x series, but backwards compatibility is not guaranteed. Also
each release contains updated, "improved" versions and it is therefore strongly
recommended to install the newer configuration files and merge back your
modifications.

-------------------------------------------------------------------------------

3.7. Why is the configuration so complicated?

"Complicated" is in the eye of the beholder. Those that are familiar with some
of the underlying concepts, such as regular expression syntax, take to it like
a fish takes to water. Also, software that tries hard to be "user friendly",
often lacks sophistication and flexibility. There is always that trade-off
there between power vs. easy-of-use. Furthermore, anyone is welcome to
contribute ideas and implementations to enhance Privoxy.

-------------------------------------------------------------------------------

3.8. How can I make my Yahoo/Hotmail/Gmail account work?

The default configuration shouldn't impact the usability of any of these
services. It may, however, make all cookies temporary, so that your browser
will forget your login credentials in between browser sessions. If you would
like not to have to log in manually each time you access those websites, simply
turn off all cookie handling for them in the user.action file. An example for
yahoo might look like:

# Allow all cookies for Yahoo login:
#
{ -crunch-incoming-cookies -crunch-outgoing-cookies -session-cookies-only }
.login.yahoo.com


These kinds of sites are often quite complex and heavy with Javascript and thus
"fragile". So if still a problem, we have an alias just for such sticky
situations:

# Gmail is a _fragile_ site:
#
{ fragile }
 # Gmail is ...
 mail.google.com


Be sure to flush your browser's caches whenever making these kinds of changes,
just to make sure the changes "take".

Make sure the domain, host and path are appropriate as well. Your browser can
tell you where you are specifically and you should use that information for
your configuration settings. Note that above it is not referenced as gmail.com,
which is a valid domain name.

-------------------------------------------------------------------------------

3.9. What's the difference between the "Cautious", "Medium" and "Advanced"
defaults?

Configuring Privoxy is not entirely trivial. To help you get started, we
provide you with three different default action "profiles" in the web based
actions file editor at http://config.privoxy.org/show-status. See the User
Manual for a list of actions, and how the default profiles are set.

Where the defaults are likely to break some sites, exceptions for known popular
"problem" sites are included, but in general, the more aggressive your default
settings are, the more exceptions you will have to make later. New users are
best to start off in "Cautious" setting. This is safest and will have the
fewest problems. See the User Manual for a more detailed discussion.

It should be noted that the "Advanced" profile (formerly known as the
"Adventuresome" profile) is more aggressive, and will make use of some of
Privoxy's advanced features. Use at your own risk!

-------------------------------------------------------------------------------

3.10. Why can I change the configuration with a browser? Does that not raise
security issues?

It may seem strange that regular users can edit the config files with their
browsers, although the whole /etc/privoxy hierarchy belongs to the user
"privoxy", with only 644 permissions.

When you use the browser-based editor, Privoxy itself is writing to the config
files. Because Privoxy is running as the user "privoxy", it can update its own
config files.

If you run Privoxy for multiple untrusted users (e.g. in a LAN) or aren't
entirely in control of your own browser, you will probably want to make sure
that the the web-based editor and remote toggle features are "off" by setting "
enable-edit-actions 0" and "enable-remote-toggle 0" in the main configuration
file.

As of Privoxy 3.0.7 these options are disabled by default.

-------------------------------------------------------------------------------

3.11. What is the default.filter file? What is a "filter"?

The default.filter file is where filters as supplied by the developers are
defined. Filters are a special subset of actions that can be used to modify or
remove web page content or headers on the fly. Content filters can be applied
to anything in the page source, header filters can be applied to either server
or client headers. Regular expressions are used to accomplish this.

There are a number of pre-defined filters to deal with common annoyances. The
filters are only defined here, to invoke them, you need to use the filter
action in one of the actions files. Content filtering is automatically disabled
for inappropriate MIME types, but if you now better than Privoxy what should or
should not be filtered you can filter any content you like.

Filters should not be confused with blocks, which is a completely different
action, and is more typically used to block ads and unwanted sites.

If you are familiar with regular expressions, and HTML, you can look at the
provided default.filter with a text editor and define your own filters. This is
potentially a very powerful feature, but requires some expertise in both
regular expressions and HTML/HTTP. You should place any modifications to the
default filters, or any new ones you create in a separate file, such as
user.filter, so they won't be overwritten during upgrades. The ability to
define multiple filter files in config is a new feature as of v. 3.0.5.

There is no GUI editor option for this part of the configuration, but you can
disable/enable the various pre-defined filters of the included default.filter
file with the web-based actions file editor. Note that the custom actions
editor must be explicitly enabled in the main config file (see
enable-edit-actions).

If you intend to develop your own filters, you might want to have a look at
Privoxy-Filter-Test.

-------------------------------------------------------------------------------

3.12. How can I set up Privoxy to act as a proxy for my LAN?

By default, Privoxy only responds to requests from 127.0.0.1 (localhost). To
have it act as a server for a network, this needs to be changed in the main
configuration file. Look for the listen-address option, which may be commented
out with a "#" symbol. Make sure it is uncommented, and assign it the address
of the LAN gateway interface, and port number to use. Assuming your LAN address
is 192.168.1.1 and you wish to run Privoxy on port 8118, this line should look
like:

  listen-address  192.168.1.1:8118


Save the file, and restart Privoxy. Configure all browsers on the network then
to use this address and port number.

Alternately, you can have Privoxy listen on all available interfaces:

  listen-address    :8118


And then use Privoxy's permit-access feature to limit connections. A firewall
in this situation is recommended as well.

The above steps should be the same for any TCP network, regardless of operating
system.

If you run Privoxy on a LAN with untrusted users, we recommend that you
double-check the access control and security options!

-------------------------------------------------------------------------------

3.13. Instead of ads, now I get a checkerboard pattern. I don't want to see
anything.

The replacement for blocked images can be controlled with the set-image-blocker
action. You have the choice of a checkerboard pattern, a transparent 1x1 GIF
image (aka "blank"), or a redirect to a custom image of your choice. Note that
this choice only has effect for images which are blocked as images, i.e. whose
URLs match both a handle-as-image and block action.

If you want to see nothing, then change the set-image-blocker action to
"blank". This can be done by editing the user.action file, or through the
web-based actions file editor.

-------------------------------------------------------------------------------

3.14. Why would anybody want to see a checkerboard pattern?

Remember that telling which image is an ad and which isn't, is an educated
guess. While we hope that the standard configuration is rather smart, it will
make occasional mistakes. The checkerboard image is visually decent, and it
shows you where images have been blocked, which can be very helpful in case
some navigation aid or otherwise innocent image was erroneously blocked. It is
recommended for new users so they can "see" what is happening. Some people
might also enjoy seeing how many banners they don't have to see.

-------------------------------------------------------------------------------

3.15. I see some images being replaced with text instead of the checkerboard
image. Why and how do I get rid of this?

This happens when the banners are not embedded in the HTML code of the page
itself, but in separate HTML (sub)documents that are loaded into (i)frames or
(i)layers, and these external HTML documents are blocked. Being non-images they
get replaced by a substitute HTML page rather than a substitute image, which
wouldn't work out technically, since the browser expects and accepts only HTML
when it has requested an HTML document.

The substitute page adapts to the available space and shows itself as a
miniature two-liner if loaded into small frames, or full-blown with a large red
"BLOCKED" banner if space allows.

If you prefer the banners to be blocked by images, you must see to it that the
HTML documents in which they are embedded are not blocked. Clicking the "See
why" link offered in the substitute page will show you which rule blocked the
page. After changing the rule and un-blocking the HTML documents, the browser
will try to load the actual banner images and the usual image blocking will
(hopefully!) kick in.

-------------------------------------------------------------------------------

3.16. Can Privoxy run as a service on Win2K/NT/XP?

Yes. Version 3.0.5 introduces full Windows service functionality. See the User
Manual for details on how to install and configure Privoxy as a service.

Earlier 3.x versions could run as a system service using srvany.exe. See the
discussion at http://sourceforge.net/tracker/?func=detail&atid=361118&aid=
485617&group_id=11118, for details, and a sample configuration.

-------------------------------------------------------------------------------

3.17. How can I make Privoxy work with other proxies like Squid or Tor?

This can be done and is often useful to combine the benefits of Privoxy with
those of a another proxy. See the forwarding chapter in the User Manual which
describes how to do this, and the How do I use Privoxy together with Tor
section below.

-------------------------------------------------------------------------------

3.18. Can I just set Privoxy to use port 80 and thus avoid individual browser
configuration?

No, its more complicated than that. This only works with special kinds of
proxies known as "intercepting" proxies (see below).

-------------------------------------------------------------------------------

3.19. Can Privoxy run as a "transparent" proxy?

The whole idea of Privoxy is to modify client requests and server responses in
all sorts of ways and therefore it's not a transparent proxy as described in
RFC 2616.

However, some people say "transparent proxy" when they mean "intercepting
proxy". If you are one of them, please read the next entry.

-------------------------------------------------------------------------------

3.20. Can Privoxy run as a "intercepting" proxy?

Privoxy can't intercept traffic itself, but it can handle requests that where
intercepted and redirected with a packet filter (like PF or iptables), as long
as the Host header is present.

As the Host header is required by HTTP/1.1 and as most web sites rely on it
anyway, this limitation shouldn't be a problem.

Please refer to your packet filter's documentation to learn how to intercept
and redirect traffic into Privoxy. Afterward you just have to configure Privoxy
to accept intercepted requests.

-------------------------------------------------------------------------------

3.21. How can I configure Privoxy for use with Outlook Express?

Outlook Express uses Internet Explorer components to both render HTML, and
fetch any HTTP requests that may be embedded in an HTML email. So however you
have Privoxy configured to work with IE, this configuration should
automatically be shared.

-------------------------------------------------------------------------------

3.22. How can I have separate rules just for HTML mail?

The short answer is, you can't. Privoxy has no way of knowing which particular
application makes a request, so there is no way to distinguish between web
pages and HTML mail. Privoxy just blindly proxies all requests. In the case of
Outlook Express (see above), OE uses IE anyway, and there is no way for Privoxy
to ever be able to distinguish between them (nor could any other proxy type
application for that matter).

For a good discussion of some of the issues involved (including privacy and
security issues), see http://sourceforge.net/tracker/?func=detail&atid=211118&
aid=629518&group_id=11118.

-------------------------------------------------------------------------------

3.23. I sometimes notice cookies sneaking through. How?

Cookies can be set in several ways. The classic method is via the Set-Cookie
HTTP header. This is straightforward, and an easy one to manipulate, such as
the Privoxy concept of session-cookies-only. There is also the possibility of
using Javascript to set cookies (Privoxy calls these content-cookies). This is
trickier because the syntax can vary widely, and thus requires a certain amount
of guesswork. It is not realistic to catch all of these short of disabling
Javascript, which would break many sites. And lastly, if the cookies are
embedded in a HTTPS/SSL secure session via Javascript, they are beyond
Privoxy's reach.

All in all, Privoxy can help manage cookies in general, can help minimize the
loss of privacy posed by cookies, but can't realistically stop all cookies.

-------------------------------------------------------------------------------

3.24. Are all cookies bad? Why?

No, in fact there are many beneficial uses of cookies. Cookies are just a
method that browsers can use to store data between pages, or between browser
sessions. Sometimes there is a good reason for this, and the user's life is a
bit easier as a result. But there is a long history of some websites taking
advantage of this layer of trust, and using the data they glean from you and
your browsing habits for their own purposes, and maybe to your potential
detriment. Such sites are using you and storing their data on your system. That
is why the privacy conscious watch from whom those cookies come, and why they
really need to be there.

See the Wikipedia cookie definition for more.

-------------------------------------------------------------------------------

3.25. How can I allow permanent cookies for my trusted sites?

There are several actions that relate to cookies. The default behavior is to
allow only "session cookies", which means the cookies only last for the current
browser session. This eliminates most kinds of abuse related to cookies. But
there may be cases where you want cookies to last.

To disable all cookie actions, so that cookies are allowed unrestricted, both
in and out, for example.com:

 { -crunch-incoming-cookies -crunch-outgoing-cookies -session-cookies-only -filter{content-cookies} }
  .example.com


Place the above in user.action. Note that some of these may be off by default
anyway, so this might be redundant, but there is no harm being explicit in what
you want to happen. user.action includes an alias for this situation, called
allow-all-cookies.

-------------------------------------------------------------------------------

3.26. Can I have separate configurations for different users?

Each instance of Privoxy has its own configuration, including such attributes
as the TCP port that it listens on. What you can do is run multiple instances
of Privoxy, each with a unique listen-address configuration setting, and
configuration path, and then each of these can have their own configurations.
Think of it as per-port configuration.

Simple enough for a few users, but for large installations, consider having
groups of users that might share like configurations.

-------------------------------------------------------------------------------

3.27. Can I set-up Privoxy as a whitelist of "good" sites?

Sure. There are a couple of things you can do for simple white-listing. Here's
one real easy one:

 ############################################################
 # Blacklist
 ############################################################
 { +block }
 / # Block *all* URLs

 ############################################################
 # Whitelist
 ############################################################
 { -block }
  kids.example.com
  toys.example.com
  games.example.com


This allows access to only those three sites by first blocking all URLs, and
then subsequently allowing three specific exceptions.

Another approach is Privoxy's trustfile concept, which incorporates the notion
of "trusted referrers". See the Trust documentation for details.

These are fairly simple approaches and are not completely foolproof. There are
various other configuration options that should be disabled (described
elsewhere here and in the User Manual) so that users can't modify their own
configuration and easily circumvent the whitelist.

-------------------------------------------------------------------------------

3.28. How can I turn off ad-blocking?

Ad blocking is achieved through a complex application of various Privoxy
actions. These actions are deployed against simple images, banners, flash
animations, text pages, JavaScript, pop-ups and pop-unders, etc., so its not as
simple as just turning one or two actions off. The various actions that make up
Privoxy ad blocking are hard-coded into the default configuration files. It has
been assumed that everyone using Privoxy is interested in this particular
feature.

If you want to do without this, there are several approaches you can take: You
can manually undo the many block rules in default.action. Or even easier, just
create your own default.action file from scratch without the many ad blocking
rules, and corresponding exceptions. Or lastly, if you are not concerned about
the additional blocks that are done for privacy reasons, you can very easily
over-ride all blocking with the following very simple rule in your user.action:

 # Unblock everybody, everywhere
 { -block }
 / # UN-Block *all* URLs


Or even a more comprehensive reversing of various ad related actions:

 # Unblock everybody, everywhere, and turn off appropriate filtering, etc
 { -block \
  -filter{banners-by-size} \
  -filter{banners-by-link} \
  allow-popups \
 }
 / # UN-Block *all* URLs and allow ads


This last "action" in this compound statement, allow-popups, is an alias that
disables various pop-up blocking features.

-------------------------------------------------------------------------------

3.29. How can I have custom template pages, like the BLOCKED page?

Privoxy "templates" are specialized text files utilized by Privoxy for various
purposes and can easily be modified using any text editor. All the template
pages are installed in a sub-directory appropriately named: templates. Knowing
something about HTML syntax will of course be helpful.

Be forewarned that the default templates are subject to being overwritten
during upgrades. You can, however, create completely new templates, place them
in another directory and specify the alternate path in the main config. For
details, have a look at the templdir option.

-------------------------------------------------------------------------------

3.30. How can I remove the "Go There Anyway" link from the BLOCKED page?

There is more than one way to do it (although Perl is not involved).

Editing the BLOCKED template page (see above) may dissuade some users, but this
method is easily circumvented. Where you need this level of control, you might
want to build Privoxy from source, and disable various features that are
available as compile-time options. You should configure the sources as follows:

 ./configure  --disable-toggle  --disable-editor  --disable-force


This will create an executable with hard-coded security features so that
Privoxy does not allow easy bypassing of blocked sites, or changing the current
configuration via any connected user's web browser.

Finally, all of these features can also be toggled on/off via options in
Privoxy's main config file which means you don't have to recompile anything.

-------------------------------------------------------------------------------

4. Miscellaneous

4.1. How much does Privoxy slow my browsing down? This has to add extra time to
browsing.

How much of an impact depends on many things, including the CPU of the host
system, how aggressive the configuration is, which specific actions are being
triggered, the size of the page, the bandwidth of the connection, etc.

Overall, it should not slow you down any in real terms, and may actually help
speed things up since ads, banners and other junk are not typically being
retrieved and displayed. The actual processing time required by Privoxy itself
for each page, is relatively small in the overall scheme of things, and happens
very quickly. This is typically more than offset by time saved not downloading
and rendering ad images and other junk content (if ad blocking is being used).

"Filtering" content via the filter or deanimate-gifs actions may cause a
perceived slowdown, since the entire document needs to be buffered before
displaying. And on very large documents, filtering may have some measurable
impact. How much depends on the page size, the actual definition of the filter
(s), etc. See below. Most other actions have little to no impact on speed.

Also, when filtering is enabled but zlib support isn't available, compression
is often disabled (see prevent-compression). This can have an impact on speed
as well, although it's probably smaller than you might think. Again, the page
size, etc. will determine how much of an impact.

-------------------------------------------------------------------------------

4.2. I notice considerable delays in page requests. What's wrong?

If you use any filter action, such as filtering banners by size, web-bugs etc,
or the deanimate-gifs action, the entire document must be loaded into memory in
order for the filtering mechanism to work, and nothing is sent to the browser
during this time.

The loading time typically does not really change much in real numbers, but the
feeling is different, because most browsers are able to start rendering
incomplete content, giving the user a feeling of "it works". This effect is
more noticeable on slower dialup connections. Extremely large documents may
have some impact on the time to load the page where there is filtering being
done. But overall, the difference should be very minimal. If there is a big
impact, then probably some other situation is contributing (like anti-virus
software).

Filtering is automatically disabled for inappropriate MIME types. But note that
if the web server mis-reports the MIME type, then content that should not be
filtered, could be. Privoxy only knows how to differentiate filterable content
because of the MIME type as reported by the server, or because of some
configuration setting that enables/disables filtering.

-------------------------------------------------------------------------------

4.3. What are "http://config.privoxy.org/" and "http://p.p/"?

http://config.privoxy.org/ is the address of Privoxy's built-in user interface,
and http://p.p/ is a shortcut for it.

Since Privoxy sits between your web browser and the Internet, it can simply
intercept requests for these addresses and answer them with its built-in "web
server".

This also makes for a good test for your browser configuration: If entering the
URL http://config.privoxy.org/ takes you to a page saying "This is Privoxy
...", everything is OK. If you get a page saying "Privoxy is not working"
instead, then your browser didn't use Privoxy for the request, hence it could
not be intercepted, and you have accessed the real web site at
config.privoxy.org.

-------------------------------------------------------------------------------

4.4. How can I submit new ads, or report problems?

Please see the Contact section for various ways to interact with the
developers.

-------------------------------------------------------------------------------

4.5. If I do submit missed ads, will they be included in future updates?

Whether such submissions are eventually included in the default.action
configuration file depends on how significant the issue is. We of course want
to address any potential problem with major, high-profile sites such as Google,
Yahoo, etc. Any site with global or regional reach, has a good chance of being
a candidate. But at the other end of the spectrum are any number of smaller,
low-profile sites such as for local clubs or schools. Since their reach and
impact are much less, they are best handled by inclusion in the user's
user.action, and thus would be unlikely to be included.

-------------------------------------------------------------------------------

4.6. Why doesn't anyone answer my support request?

Rest assured that it has been read and considered. Why it is not answered,
could be for various reasons, including no one has a good answer for it, no one
has had time to yet investigate it thoroughly, it has been reported numerous
times already, or because not enough information was provided to help us help
you. Your efforts are not wasted, and we do appreciate them.

-------------------------------------------------------------------------------

4.7. How can I hide my IP address?

If you run both the browser and Privoxy locally, you cannot hide your IP
address with Privoxy or ultimately any other software alone. The server needs
to know your IP address so that it knows where to send the responses back.

There are many publicly usable "anonymous" proxies out there, which provide a
further level of indirection between you and the web server.

However, these proxies are called "anonymous" because you don't need to
authenticate, not because they would offer any real anonymity. Most of them
will log your IP address and make it available to the authorities in case you
violate the law of the country they run in. In fact you can't even rule out
that some of them only exist to *collect* information on (those suspicious)
people with a more than average preference for privacy.

If you want to hide your IP address from most adversaries, you should consider
chaining Privoxy with Tor. The configuration details can be found in How do I
use Privoxy together with Tor section just below.

-------------------------------------------------------------------------------

4.8. Can Privoxy guarantee I am anonymous?

No. Your chances of remaining anonymous are improved, but unless you chain
Privoxy with Tor or a similar proxy and know what you're doing when it comes to
configuring the rest of your system, you should assume that everything you do
on the Web can be traced back to you.

Privoxy can remove various information about you, and allows you more freedom
to decide which sites you can trust, and what details you want to reveal. But
it neither hides your IP address, nor can it guarantee that the rest of the
system behaves correctly. There are several possibilities how a web sites can
find out who you are, even if you are using a strict Privoxy configuration and
chained it with Tor.

Most of Privoxy's privacy-enhancing features can be easily subverted by an
insecure browser configuration, therefore you should use a browser that can be
configured to only execute code from trusted sites, and be careful which sites
you trust. For example there is no point in having Privoxy modify the
User-Agent header, if websites can get all the information they want through
JavaScript, ActiveX, Flash, Java etc.

A few browsers disclose the user's email address in certain situations, such as
when transferring a file by FTP. Privoxy does not filter FTP. If you need this
feature, or are concerned about the mail handler of your browser disclosing
your email address, you might consider products such as NSClean.

Browsers available only as binaries could use non-standard headers to give out
any information they can have access to: see the manufacturer's license
agreement. It's impossible to anticipate and prevent every breach of privacy
that might occur. The professionally paranoid prefer browsers available as
source code, because anticipating their behavior is easier. Trust the source,
Luke!

-------------------------------------------------------------------------------

4.9. A test site says I am not using a Proxy.

Good! Actually, they are probably testing for some other kinds of proxies.
Hiding yourself completely would require additional steps.

-------------------------------------------------------------------------------

4.10. How do I use Privoxy together with Tor?

Before you configure Privoxy to use Tor, please follow the User Manual chapters
2. Installation and 5. Startup to make sure Privoxy itself is setup correctly.

If it is, refer to Tor's extensive documentation to learn how to install Tor,
and make sure Tor's logfile says that "Tor has successfully opened a circuit"
and it "looks like client functionality is working".

If either Tor or Privoxy isn't working, their combination most likely will
neither. Testing them on their own will also help you to direct problem reports
to the right audience. If Privoxy isn't working, don't bother the Tor
developers. If Tor isn't working, don't send bug reports to the Privoxy Team.

If you verified that Privoxy and Tor are working, it is time to connect them.
As far as Privoxy is concerned, Tor is just another proxy that can be reached
by socks4 or socks4a. Most likely you are interested in Tor to increase your
anonymity level, therefore you should use socks4a, to make sure DNS requests
are done through Tor and thus invisible to your local network.

Since Privoxy 3.0.5, its main configuration file is already prepared for Tor,
if you are using a default Tor configuration and run it on the same system as
Privoxy, you just have to edit the forwarding section and uncomment the line:

#        forward-socks4a             /     127.0.0.1:9050 .



This is enough to reach the Internet, but additionally you might want to
uncomment the following forward rules, to make sure your local network is still
reachable through Privoxy:

#        forward         192.168.*.*/     .
#        forward            10.*.*.*/     .
#        forward           127.*.*.*/     .



Unencrypted connections to systems in these address ranges will be as (un)
secure as the local network is, but the alternative is that your browser can't
reach the network at all. Then again, that may actually be desired and if you
don't know for sure that your browser has to be able to reach the local
network, there's no reason to allow it.

If you want your browser to be able to reach servers in your local network by
using their names, you will need additional exceptions that look like this:

#        forward           localhost/     .



Save the modified configuration file and open http://config.privoxy.org/
show-status/ in your browser, confirm that Privoxy has reloaded its
configuration and that there are no other forward lines, unless you know that
you need them. If everything looks good, refer to Tor Faq 4.2 to learn how to
verify that you are really using Tor.

Afterward, please take the time to at least skim through the rest of Tor's
documentation. Make sure you understand what Tor does, why it is no replacement
for application level security, and why you probably don't want to use it for
unencrypted logins.

-------------------------------------------------------------------------------

4.11. Might some things break because header information or content is being
altered?

Definitely. It is common for sites to use browser type, browser version, HTTP
header content, and various other techniques in order to dynamically decide
what to display and how to display it. What you see, and what I see, might be
very different. There are many, many ways that this can be handled, so having
hard and fast rules, is tricky.

The "User-Agent" is sometimes used in this way to identify the browser, and
adjust content accordingly.

Also, different browsers use different encodings of non-English characters,
certain web servers convert pages on-the-fly according to the User Agent
header. Giving a "User Agent" with the wrong operating system or browser
manufacturer causes some sites in these languages to be garbled; Surfers to
Eastern European sites should change it to something closer. And then some page
access counters work by looking at the "Referer" header; they may fail or break
if unavailable. The weather maps of Intellicast have been blocked by their
server when no "Referer" or cookie is provided, is another example. (But you
can forge both headers without giving information away). There are many other
ways things can go wrong when trying to fool a web server. The results of which
could inadvertently cause pages to load incorrectly, partially, or even not at
all. And there may be no obvious clues as to just what went wrong, or why.
Nowhere will there be a message that says "Turn off fast-redirects or else! "

Similar thoughts apply to modifying JavaScript, and, to a lesser degree, HTML
elements.

If you have problems with a site, you will have to adjust your configuration
accordingly. Cookies are probably the most likely adjustment that may be
required, but by no means the only one.

-------------------------------------------------------------------------------

4.12. Can Privoxy act as a "caching" proxy to speed up web browsing?

No, it does not have this ability at all. You want something like Squid or
Polipo for this. And, yes, before you ask, Privoxy can co-exist with other
kinds of proxies like Squid. See the forwarding chapter in the user manual for
details.

-------------------------------------------------------------------------------

4.13. What about as a firewall? Can Privoxy protect me?

Not in the way you mean, or in the way some firewall vendors claim they can.
Privoxy can help protect your privacy, but can't protect your system from
intrusion attempts. It is, of course, perfectly possible to use both.

-------------------------------------------------------------------------------

4.14. I have large empty spaces / a checkerboard pattern now where ads used to
be. Why?

It is technically possible to eliminate banners and ads in a way that frees
their allocated page space. This could easily be done by blocking with
Privoxy's filters, and eliminating the entire image references from the HTML
page source.

But, this would consume considerably more CPU resources (IOW, slow things
down), would likely destroy the layout of some web pages which rely on the
banners utilizing a certain amount of page space, and might fail in other
cases, where the screen space is reserved (e.g. by HTML tables for instance).
Also, making ads and banners disappear without any trace complicates
troubleshooting, and would sooner or later be problematic.

The better alternative is to instead let them stay, and block the resulting
requests for the banners themselves as is now the case. This leaves either
empty space, or the familiar checkerboard pattern.

So the developers won't support this in the default configuration, but you can
of course define appropriate filters yourself to achieve this.

-------------------------------------------------------------------------------

4.15. How can Privoxy filter Secure (HTTPS) URLs?

Since secure HTTP connections are encrypted SSL sessions between your browser
and the secure site, and are meant to be reliably secure, there is little that
Privoxy can do but hand the raw gibberish data though from one end to the other
unprocessed.

The only exception to this is blocking by host patterns, as the client needs to
tell Privoxy the name of the remote server, so that Privoxy can establish the
connection. If that name matches a host-only pattern, the connection will be
blocked.

As far as ad blocking is concerned, this is less of a restriction than it may
seem, since ad sources are often identifiable by the host name, and often the
banners to be placed in an encrypted page come unencrypted nonetheless for
efficiency reasons, which exposes them to the full power of Privoxy's ad
blocking.

"Content cookies" (those that are embedded in the actual HTML or JS page
content, see filter{content-cookies}), in an SSL transaction will be impossible
to block under these conditions. Fortunately, this does not seem to be a very
common scenario since most cookies come by traditional means.

-------------------------------------------------------------------------------

4.16. Privoxy runs as a "server". How secure is it? Do I need to take any
special precautions?

On Unix-like systems, Privoxy can run as a non-privileged user, which is how we
recommend it be run. Also, by default Privoxy listens to requests from
"localhost" only.

The server aspect of Privoxy is not itself directly exposed to the Internet in
this configuration. If you want to have Privoxy serve as a LAN proxy, this will
have to be opened up to allow for LAN requests. In this case, we'd recommend
you specify only the LAN gateway address, e.g. 192.168.1.1, in the main Privoxy
configuration file and check all access control and security options. All LAN
hosts can then use this as their proxy address in the browser proxy
configuration, but Privoxy will not listen on any external interfaces. ACLs can
be defined in addition, and using a firewall is always good too. Better safe
than sorry.

-------------------------------------------------------------------------------

4.17. Can I temporarily disable Privoxy?

Privoxy doesn't have a transparent proxy mode, but you can toggle off blocking
and content filtering.

The easiest way to do that is to point your browser to the remote toggle URL:
http://config.privoxy.org/toggle.

See the Bookmarklets section of the User Manual for an easy way to access this
feature. Note that this is a feature that may need to be enabled in the main
config file.

-------------------------------------------------------------------------------

4.18. When "disabled" is Privoxy totally out of the picture?

No, this just means all optional filtering and actions are disabled. Privoxy is
still acting as a proxy, but just doing less of the things that Privoxy would
normally be expected to do. It is still a "middle-man" in the interaction
between your browser and web sites. See below to bypass the proxy.

-------------------------------------------------------------------------------

4.19. How can I tell Privoxy to totally ignore certain sites?

Bypassing a proxy, or proxying based on arbitrary criteria, is purely a browser
configuration issue, not a Privoxy issue. Modern browsers typically do have
settings for not proxying certain sites. Check your browser's help files.

-------------------------------------------------------------------------------

4.20. My logs show Privoxy "crunches" ads, but also its own internal CGI pages.
What is a "crunch"?

A "crunch" simply means Privoxy intercepted something, nothing more. Often this
is indeed ads or banners, but Privoxy uses the same mechanism for trapping
requests for its own internal pages. For instance, a request for Privoxy's
configuration page at: http://config.privoxy.org, is intercepted (i.e. it does
not go out to the 'net), and the familiar CGI configuration is returned to the
browser, and the log consequently will show a "crunch".

Since version 3.0.7, Privoxy will also log the crunch reason. If you are using
an older version you might want to upgrade.

-------------------------------------------------------------------------------

4.21. Can Privoxy effect files that I download from a webserver? FTP server?

From the webserver's perspective, there is no difference between viewing a
document (i.e. a page), and downloading a file. The same is true of Privoxy. If
there is a match for a block pattern, it will still be blocked, and of course
this is obvious.

Filtering is potentially more of a concern since the results are not always so
obvious, and the effects of filtering are there whether the file is simply
viewed, or downloaded. And potentially whether the content is some obnoxious
advertisement, or Mr. Jimmy's latest/greatest source code jewel. Of course, one
of these presumably is "bad" content that we don't want, and the other is
"good" content that we do want. Privoxy is blind to the differences, and can
only distinguish "good from bad" by the configuration parameters we give it.

Privoxy knows the differences in files according to the "Content Type" as
reported by the webserver. If this is reported accurately (e.g. "application/
zip" for a zip archive), then Privoxy knows to ignore these where appropriate.
Privoxy potentially can filter HTML as well as plain text documents, subject to
configuration parameters of course. Also, documents that are of an unknown type
(generally assumed to be "text/plain") can be filtered, as will those that
might be incorrectly reported by the webserver. If such a file is a downloaded
file that is intended to be saved to disk, then any content that might have
been altered by filtering, will be saved too, for these (probably rare) cases.

Note that versions later than 3.0.2 do NOT filter document types reported as
"text/plain". Prior to this, Privoxy did filter this document type.

In short, filtering is "ON" if a) the content type as reported by the webserver
is appropriate and b) the configuration allows it (or at least does not
disallow it). That's it. There is no magic cookie anywhere to say this is
"good" and this is "bad". It's the configuration that lets it all happen or
not.

If you download text files, you probably do not want these to be filtered,
particularly if the content is source code, or other critical content. Source
code sometimes might be mistaken for Javascript (i.e. the kind that might open
a pop-up window). It is recommended to turn off filtering for download sites
(particularly if the content may be plain text files and you are using version
3.0.2 or earlier) in your user.action file. And also, for any site or page
where making any changes at all to the content is to be avoided.

Privoxy does not do FTP at all, only HTTP and HTTPS (SSL) protocols, so please
don't try.

-------------------------------------------------------------------------------

4.22. I just downloaded a Perl script, and Privoxy altered it! Yikes, what is
wrong!

Please read above.

-------------------------------------------------------------------------------

4.23. Should I continue to use a "HOSTS" file for ad-blocking?

One time-tested technique to defeat common ads is to trick the local DNS system
by giving a phony IP address for the ad generator in the local HOSTS file,
typically using 127.0.0.1, aka localhost. This effectively blocks the ad.

There is no reason to use this technique in conjunction with Privoxy. Privoxy
does essentially the same thing, much more elegantly and with much more
flexibility. A large HOSTS file, in fact, not only duplicates effort, but may
get in the way and seriously slow down your system. It is recommended to remove
such entries from your HOSTS file. If you think your hosts list is neglected by
Privoxy's configuration, consider adding your list to your user.action file:

  { +block }
   www.ad.example1.com
   ad.example2.com
   ads.galore.example.com
   etc.example.com


-------------------------------------------------------------------------------

4.24. Where can I find more information about Privoxy and related issues?

Other references and sites of interest to Privoxy users:

http://www.privoxy.org/, the Privoxy Home page.

http://www.privoxy.org/faq/, the Privoxy FAQ.

http://sourceforge.net/projects/ijbswa/, the Project Page for Privoxy on
SourceForge.

http://config.privoxy.org/, the web-based user interface. Privoxy must be
running for this to work. Shortcut: http://p.p/

http://sourceforge.net/tracker/?group_id=11118&atid=460288, to submit "misses"
and other configuration related suggestions to the developers.

http://www.junkbusters.com/ht/en/cookies.html, an explanation how cookies are
used to track web users.

http://www.junkbusters.com/ijb.html, the original Internet Junkbuster.

http://privacy.net/, a useful site to check what information about you is
leaked while you browse the web.

http://www.squid-cache.org/, a popular caching proxy, which is often used
together with Privoxy.

http://www.pps.jussieu.fr/~jch/software/polipo/, Polipo is a caching proxy with
advanced features like pipelining, multiplexing and caching of partial
instances. In many setups it can be used as Squid replacement.

http://tor.eff.org/, Tor can help anonymize web browsing, web publishing,
instant messaging, IRC, SSH, and other applications.

http://www.privoxy.org/developer-manual/, the Privoxy developer manual.

-------------------------------------------------------------------------------

4.25. I've noticed that Privoxy changes "Microsoft" to "MicroSuck"! Why are you
manipulating my browsing?

We're not. The text substitutions that you are seeing are disabled in the
default configuration as shipped. You have either manually activated the "fun"
filter which is clearly labeled "Text replacements for subversive browsing fun!
" or you are using an older Privoxy version and have implicitly activated it by
choosing the "Adventuresome" profile in the web-based editor. Please upgrade.

-------------------------------------------------------------------------------

4.26. Does Privoxy produce "valid" HTML (or XHTML)?

Privoxy generates HTML in both its own "templates", and possibly whenever there
are text substitutions via a Privoxy filter. While this should always conform
to the HTML 4.01 specifications, it has not been validated against this or any
other standard.

-------------------------------------------------------------------------------

5. Troubleshooting

5.1. I cannot connect to any websites. Or, I am getting "connection refused"
message with every web page. Why?

There are several possibilities:

  * Privoxy is not running. Solution: verify that Privoxy is installed
    correctly, has not crashed, and is indeed running. Turn on Privoxy's
    logging, and look at the logs to see what they say.

  * Or your browser is configured for a different port than what Privoxy is
    using. Solution: verify that Privoxy and your browser are set to the same
    port (listen-address).

  * Or if using a forwarding rule, you have a configuration problem or a
    problem with a host in the forwarding chain. Solution: temporarily alter
    your configuration and take the forwarders out of the equation.

  * Or you have a firewall that is interfering and blocking you. Solution: try
    disabling or removing the firewall as a simple test.

-------------------------------------------------------------------------------

5.2. Why am I getting a 503 Error (WSAECONNREFUSED) on every page?

More than likely this is a problem with your TCP/IP networking. ZoneAlarm has
been reported to cause this symptom -- even if not running! The solution is to
either fight the ZA configuration, or uninstall ZoneAlarm, and then find
something better behaved in its place. Other personal firewall type products
may cause similar type problems if not configured correctly.

-------------------------------------------------------------------------------

5.3. I just added a new rule, but the steenkin ad is still getting through.
How?

If the ad had been displayed before you added its URL, it will probably be held
in the browser's cache for some time, so it will be displayed without the need
for any request to the server, and Privoxy will not be involved. Flush the
browser's caches, and then try again.

If this doesn't help, you probably have an error in the rule you applied. Try
pasting the full URL of the offending ad into http://config.privoxy.org/
show-url-info and see if it really matches your new rule. Blocking ads is like
blocking spam: a lot of tinkering is required to stay ahead of the game. And
remember you need to block the URL of the ad in question, which may be entirely
different from the site URL itself. Most ads are hosted on different servers
than the main site itself. If you right-click on the ad, you should be able to
get all the relevant information you need. Alternately, you can find the
correct URL by looking at Privoxy's logs (you may need to enable logging in the
main config file if its disabled).

Below is a slightly modified real-life log snippet that originates with one
requested URL: www.example.com (name of site was changed for this example, the
number of requests is real). You can see in this the complexity of what goes
into making up this one "page". There are eight different domains involved
here, with thirty two separate URLs requested in all, making up all manner of
images, Shockwave Flash, JavaScript, CSS stylesheets, scripts, and other
related content. Some of this content is obviously "good" or "bad", but not
all. Many of the more questionable looking requests, are going to outside
domains that seem to be identifying themselves with suspicious looking names,
making our job a little easier. Privoxy has "crunched" (meaning caught and
BLOCKED) quite a few items in this example, but perhaps missed a few as well.

Request: www.example.com/
Request: www.example.com/favicon.ico
Request: img.example.com/main.css
Request: img.example.com/sr.js
Request: example.betamarker.com/example.html
Request: www.lik-sang.com/Banners/bestsellers/skyscraper.php?likref=BSellers
Request: img.example.com/pb.png
Request: www.google-analytics.com/urchin.js crunch! (Blocked)
Request: www.advertising-department.com/ats/switch.ps.php?26856 crunch! (Blocked)
Request: img.example.com/p.gif
Request: www.popuptraffic.com/assign.php?l=example&mode=behind crunch! (Blocked)
Request: www.popuptraffic.com/scripts/popup.php?hid=5c3cf&tmpl=PBa.tmpl crunch! (Blocked)
Request: www.popuptraffic.com/assign.php?l=example crunch! (Blocked)
Request: www.lik-sang.com/Banners/best_sellers/best_sellers.css
Request: www.adtrak.net/adx.js crunch! (Blocked)
Request: img.example.com/hbg.gif
Request: img.example.com/example.jpg
Request: img.example.com/mt.png
Request: img.example.com/mm.png
Request: img.example.com/mb.png
Request: www.popuptraffic.com/scripts/popup.php?hid=a71b91fa5&tmpl=Ua.tmp crunch! (Blocked)
Request: www.example.com/tracker.js
Request: www.lik-sang.com/Banners/best_sellers/lsi_head.gif
Request: www.adtrak.net/adjs.php?n=020548130&what=zone:61 crunch! (Blocked)
Request: www.adtrak.net/adjs.php?n=463594413&what=zone:58&source=Ua crunch! (Blocked)
Request: www.lik-sang.com/Banners/best_sellers/bottomani.swf
Request: mmm.elitemediagroup.net/install.php?allowpop=no&popupmincook=0&allowsp2=1 crunch! (Blocked)
Request: www.example.com/tracker.js?screen=1400x1050&win=962x693
Request: www.adtrak.net/adlog.php?bannerid=1309&clientid=439&zoneid=61 crunch! (Blocked)
Request: 66.70.21.80/scripts/click.php?hid=5c3cf599a9efd0320d26&si
Request: 66.70.21.80/img/pixel.gif
Request: www.adtrak.net/adlog.php?bannerid=1309&clientid=439&zoneid=58&source=Ua&block=86400 crunch! (Blocked)
Request: 66.70.21.80/scripts/click.php?hid=a71b9f6504b0c5681fa5&si=Ua


Despite 12 out of 32 requests being blocked, the page looked, and seemed to
behave perfectly "normal" (minus some ads, of course).

-------------------------------------------------------------------------------

5.4. One of my favorite sites does not work with Privoxy. What can I do?

First verify that it is indeed a Privoxy problem, by toggling off Privoxy
through http://config.privoxy.org/toggle (the toggle feature may need to be
enabled in the main config), and then shift-reloading the problem page (i.e.
holding down the shift key while clicking reload. Alternatively, flush your
browser's disk and memory caches).

If the problem went away, we know we have a configuration related problem. Now
go to http://config.privoxy.org/show-url-info and paste the full URL of the
page in question into the prompt. See which actions are being applied to the
URL, and which matches in which actions files are responsible for that. It
might be helpful also to look at your logs for this site too, to see what else
might be happening (note: logging may need to be enabled in the main config
file). Many sites are complex and require a number of related pages to help
present their content. Look at what else might be used by the page in question,
and what of that might be required. Now, armed with this information, go to
http://config.privoxy.org/show-status and select the appropriate actions files
for editing.

You can now either look for a section which disables the actions that you
suspect to cause the problem and add a pattern for your site there, or make up
a completely new section for your site. In any case, the recommended way is to
disable only the prime suspect, reload the problem page, and only if the
problem persists, disable more and more actions until you have identified the
culprit. You may or may not want to turn the other actions on again. Remember
to flush your browser's caches in between any such changes!

Alternately, if you are comfortable with a text editor, you can accomplish the
same thing by editing the appropriate actions file. Probably the easiest way to
deal with such problems when editing by hand is to add your site to a { fragile
} section in user.action, which is an alias that turns off most "dangerous"
actions, but is also likely to turn off more actions then needed, and thus
lower your privacy and protection more than necessary,

Troubleshooting actions is discussed in more detail in the User Manual
appendix, Troubleshooting: the Anatomy of an Action. There is also an actions
tutorial with general configuration information and examples.

As a last resort, you can always see if your browser has a setting that will
bypass the proxy setting for selective sites. Modern browsers can do this.

-------------------------------------------------------------------------------

5.5. After installing Privoxy, I have to log in every time I start IE. What
gives?

This is a quirk that effects the installation of Privoxy, in conjunction with
Internet Explorer and Internet Connection Sharing on Windows 2000 and Windows
XP. The symptoms may appear to be corrupted or invalid DUN settings, or
passwords.

When setting up an NT based Windows system with Privoxy you may find that
things do not seem to be doing what you expect. When you set your system up you
will probably have set up Internet Connection Sharing (ICS) with Dial up
Networking (DUN) when logged in with administrator privileges. You will
probably have made this DUN connection available to other accounts that you may
have set-up on your system. E.g. Mum or Dad sets up the system and makes
accounts suitably configured for the kids.

When setting up Privoxy in this environment you will have to alter the proxy
set-up of Internet Explorer (IE) for the specific DUN connection on which you
wish to use Privoxy. When you do this the ICS DUN set-up becomes user specific.
In this instance you will see no difference if you change the DUN connection
under the account used to set-up the connection. However when you do this from
another user you will notice that the DUN connection changes to make available
to "Me only". You will also find that you have to store the password under each
different user!

The reason for this is that each user's set-up for IE is user specific. Each
set-up DUN connection and each LAN connection in IE store the settings for each
user individually. As such this enforces individual configurations rather than
common ones. Hence the first time you use a DUN connection after re-booting
your system it may not perform as you expect, and prompt you for the password.
Just set and save the password again and all should be OK.

[Thanks to Ray Griffith for this submission.]

-------------------------------------------------------------------------------

5.6. I cannot connect to any FTP sites. Privoxy is blocking me.

Privoxy cannot act as a proxy for FTP traffic, so do not configure your browser
to use Privoxy as an FTP proxy. The same is true for any protocol other than
HTTP or HTTPS (SSL).

Most browsers understand FTP as well as HTTP. If you connect to a site, with a
URL like ftp://ftp.example.com, your browser is making an FTP connection, and
not a HTTP connection. So while your browser may speak FTP, Privoxy does not,
and cannot proxy such traffic.

To complicate matters, some systems may have a generic "proxy" setting, which
will enable various protocols, including both HTTP and FTP proxying! So it is
possible to accidentally enable FTP proxying in these cases. And of course, if
this happens, Privoxy will indeed cause problems since it does not know FTP.
Newer version will give a sane error message if a FTP connection is attempted.
Just disable the FTP setting and all will be well again.

Will Privoxy ever proxy FTP traffic? Unlikely. There just is not much reason,
and the work to make this happen is more than it may seem.

-------------------------------------------------------------------------------

5.7. In Mac OSX, I can't configure Microsoft Internet Explorer to use Privoxy
as the HTTP proxy.

Microsoft Internet Explorer (in versions like 5.1) respects system-wide network
settings. In order to change the HTTP proxy, open System Preferences, and click
on the Network icon. In the settings pane that comes up, click on the Proxies
tab. Ensure the "Web Proxy (HTTP)" checkbox is checked and enter 127.0.0.1 in
the entry field. Enter 8118 in the Port field. The next time you start IE, it
should reflect these values.

-------------------------------------------------------------------------------

5.8. In Mac OSX, I dragged the Privoxy folder to the trash in order to
uninstall it. Now the finder tells me I don't have sufficient privileges to
empty the trash.

Just dragging the Privoxy folder to the trash is not enough to delete it.
Privoxy supplies an uninstall.command file that takes care of these details.
Open the trash, drag the uninstall.command file out of the trash and
double-click on it. You will be prompted for confirmation and the
administration password.

The trash may still appear full after this command; emptying the trash from the
desktop should make it appear empty again.

-------------------------------------------------------------------------------

5.9. In Mac OSX Panther (10.3), images often fail to load and/or I experience
random delays in page loading. I'm using localhost as my browser's proxy
setting.

We believe this is due to an IPv6-related bug in OSX, but don't fully
understand the issue yet. In any case, changing the proxy setting to 127.0.0.1
instead of localhost works around the problem.

-------------------------------------------------------------------------------

5.10. I get a completely blank page at one site. "View Source" shows only:
<html><body></body></html>. Without Privoxy the page loads fine.

Chances are that the site suffers from a bug in PHP, which results in empty
pages being sent if the client explicitly requests an uncompressed page, like
Privoxy does. This bug has been fixed in PHP 4.2.3.

To find out if this is in fact the source of the problem, try adding the site
to a -prevent-compression section in user.action:

   # Make exceptions for ill-behaved sites:
   #
   {-prevent-compression}
    .example.com


If that works, you may also want to report the problem to the site's
webmasters, telling them to use zlib.output_compression instead of ob_gzhandler
in their PHP applications (workaround) or upgrade to PHP 4.2.3 or later (fix).

-------------------------------------------------------------------------------

5.11. My logs show many "Unable to get my own hostname" lines. Why?

Privoxy tries to get the hostname of the system its running on from the IP
address of the system interface it is bound to (from the config file
listen-address setting). If the system cannot supply this information, Privoxy
logs this condition.

Typically, this would be considered a minor system configuration error. It is
not a fatal error to Privoxy however, but may result in a much slower response
from Privoxy on some platforms due to DNS timeouts.

This can be caused by a problem with the local HOSTS file. If this file has
been changed from the original, try reverting it to see if that helps. Make
sure whatever name(s) are used for the local system, that they resolve both
ways.

-------------------------------------------------------------------------------

5.12. When I try to launch Privoxy, I get an error message "port 8118 is
already in use" (or similar wording). Why?

Port 8118 is Privoxy's default TCP "listening" port. Typically this message
would mean that there is already one instance of Privoxy running, and your
system is actually trying to start a second Privoxy on the same port, which
will not work. (You can have multiple instances but they must be assigned
different ports.) How and why this might happen varies from platform to
platform, but you need to check your installation and start-up procedures.

-------------------------------------------------------------------------------

5.13. Pages with UTF-8 fonts are garbled.

This is caused by the "demoronizer" filter. You should either upgrade Privoxy,
or at least upgrade to the most recent default.action file available from
SourceForge. Or you can simply disable the demoronizer filter.

-------------------------------------------------------------------------------

5.14. Why are binary files (such as images) corrupted when Privoxy is used?

This may also be caused by the "demoronizer" filter, in conjunction with a web
server that is misreporting the content type. Binary files are exempted from
Privoxy's filtering (unless the web server by mistake says the file is
something else). Either upgrade Privoxy, or go to the most recent
default.action file available from SourceForge.

-------------------------------------------------------------------------------

5.15. What is the "demoronizer" and why is it there?

The original demoronizer was a Perl script that cleaned up HTML pages which
were created with certain Microsoft products. MS has used proprietary
extensions to standardized font encodings (ISO 8859-1), which has caused
problems for pages that are viewed with non-Microsoft products (and are
expecting to see a standard set of fonts). The demoronizer corrected these
errors so the pages displayed correctly. Privoxy borrowed from this script,
introducing a filter based on the original demoronizer, which in turn could
correct these errors on the fly.

But this is only needed in some situations, and will cause serious problems in
some other situations.

If you are using Microsoft products, you do not need it. If you need to view
pages with UTF-8 characters (such as Cyrillic or Chinese), then it will cause
corruption of the fonts, and thus should not be on.

On the other hand, if you use non-Microsoft products, and you occasionally
notice weird characters on pages, you might want to try it.

-------------------------------------------------------------------------------

5.16. Why do I keep seeing "PrivoxyWindowOpen()" in raw source code?

Privoxy is attempting to disable malicious Javascript in this case, with the
unsolicited-popups filter. Privoxy cannot tell very well "good" code snippets
from "bad" code snippets.

If you see this in HTML source, and the page displays without problems, then
this is good, and likely some pop-up window was disabled. If you see this where
it is causing a problem, such as a downloaded program source code file, then
you should set an exception for this site or page such that the integrity of
the page stays in tact by disabling all filtering.

-------------------------------------------------------------------------------

5.17. I am getting too many DNS errors like "404 No Such Domain". Why can't
Privoxy do this better?

There are potentially several factors here. First of all, the DNS resolution is
done by the underlying operating system -- not Privoxy itself. Privoxy merely
initiates the process and hands it off, and then later reports whatever the
outcome was. And tries to give a coherent message if there seems to be a
problem. In some cases, this might otherwise be mitigated by the browser itself
which might try some work-arounds and alternate approaches (e.g adding "www."
to the URL).

In other cases, if Privoxy is being chained with another proxy, this could
complicate the issue, and cause undue delays and timeouts. In the case of a
"socks4a" proxy, the socks server handles all the DNS. Privoxy would just be
the "messenger" which is reporting whatever problem occurred downstream, and
not the root cause of the error.

In any case, versions newer than 3.0.3 include various improvements to help
Privoxy better handle these cases.

-------------------------------------------------------------------------------

5.18. At one site Privoxy just hangs, and starts taking all CPU. Why is this?

This is probably a manifestation of the "100% cpu" problem that occurs on pages
containing many (thousands upon thousands) of blank lines. The blank lines are
in the raw HTML source of the page, and the browser just ignores them. But the
pattern matching in Privoxy's page filtering mechanism is trying to match
against absurdly long strings and this becomes very CPU-intensive, taking a
long, long time to complete. Until a better solution comes along, disable
filtering on these pages, particularly the js-annoyances and unsolicited-popups
filters.

-------------------------------------------------------------------------------

5.19. I just installed Privoxy, and all my browsing has slowed to a crawl. What
gives?

This should not happen, and for the overwhelming number of users world-wide, it
does not happen. I would suspect some inadvertent interaction of software
components such as anti-virus software, spyware protectors, personal firewalls
or similar components. Try disabling (or uninstalling) these one at a time and
see if that helps.

-------------------------------------------------------------------------------

5.20. Why do my filters work on some sites but not on others?

It's probably due to compression. It is a common practice for web servers to
send their content "compressed" in order to speed things up, and then let the
browser "uncompress" them. When compiled with zlib support Privoxy can
decompress content before filtering, otherwise you may want to enable
prevent-compression.

-------------------------------------------------------------------------------

6. Contacting the developers, Bug Reporting and Feature Requests

We value your feedback. In fact, we rely on it to improve Privoxy and its
configuration. However, please note the following hints, so we can provide you
with the best support:

-------------------------------------------------------------------------------

6.1. Get Support

For casual users, our support forum at SourceForge is probably best suited:
http://sourceforge.net/tracker/?group_id=11118&atid=211118

All users are of course welcome to discuss their issues on the users mailing
list, where the developers also hang around.

Note that the Privoxy mailing lists are moderated. Posts from unsubscribed
addresses have to be accepted manually by a moderator. This may cause a delay
of several days and if you use a subject that doesn't clearly mention Privoxy
or one of its features, your message may be accidentally discarded as spam.

If you aren't subscribed, you should therefore spend a few seconds to come up
with a proper subject. Additionally you should make it clear that you want to
get CC'd. Otherwise some responses will be directed to the mailing list only,
and you won't see them.

-------------------------------------------------------------------------------

6.2. Reporting Problems

"Problems" for our purposes, come in two forms:

  * Configuration issues, such as ads that slip through, or sites that don't
    function properly due to one Privoxy "action" or another being turned "on".

  * "Bugs" in the programming code that makes up Privoxy, such as that might
    cause a crash.

-------------------------------------------------------------------------------

6.2.1. Reporting Ads or Other Configuration Problems

Please send feedback on ads that slipped through, innocent images that were
blocked, sites that don't work properly, and other configuration related
problem of default.action file, to http://sourceforge.net/tracker/?group_id=
11118&atid=460288, the Actions File Tracker.

New, improved default.action files may occasionally be made available based on
your feedback. These will be announced on the ijbswa-announce list and
available from our the files section of our project page.

-------------------------------------------------------------------------------

6.2.2. Reporting Bugs

Please report all bugs through our bug tracker: http://sourceforge.net/tracker
/?group_id=11118&atid=111118.

Before doing so, please make sure that the bug has not already been submitted
and observe the additional hints at the top of the submit form. If already
submitted, please feel free to add any info to the original report that might
help to solve the issue.

Please try to verify that it is a Privoxy bug, and not a browser or site bug or
documented behaviour that just happens to be different than what you expected.
If unsure, try toggling off Privoxy, and see if the problem persists.

If you are using your own custom configuration, please try the stock configs to
see if the problem is configuration related. If you're having problems with a
feature that is disabled by default, please ask around on the mailing list if
others can reproduce the problem.

If you aren't using the latest Privoxy version, the bug may have been found and
fixed in the meantime. We would appreciate if you could take the time to
upgrade to the latest version (or even the latest CVS snapshot) and verify that
your bug still exists.

Please be sure to provide the following information:

  * The exact Privoxy version you are using (if you got the source from CVS,
    please also provide the source code revisions as shown in http://
    config.privoxy.org/show-version).

  * The operating system and versions you run Privoxy on, (e.g. Windows XP
    SP2), if you are using a Unix flavor, sending the output of "uname -a"
    should do, in case of GNU/Linux, please also name the distribution.

  * The name, platform, and version of the browser you were using (e.g.
    Internet Explorer v5.5 for Mac).

  * The URL where the problem occurred, or some way for us to duplicate the
    problem (e.g. http://somesite.example.com/?somethingelse=123).

  * Whether your version of Privoxy is one supplied by the Privoxy developers
    via SourceForge, or if you got your copy somewhere else.

  * Whether you are using Privoxy in tandem with another proxy such as Tor. If
    so, please temporary disable the other proxy to see if the symptoms change.

  * Whether you are using a personal firewall product. If so, does Privoxy work
    without it?

  * Any other pertinent information to help identify the problem such as config
    or log file excerpts (yes, you should have log file entries for each action
    taken).

You don't have to tell us your actual name when filing a problem report, but
please use a nickname so we can differentiate between your messages and the
ones entered by other "anonymous" users that may respond to your request if
they have the same problem or already found a solution.

Please also check the status of your request a few days after submitting it, as
we may request additional information. If you use a SF id, you should
automatically get a mail when someone responds to your request.

The appendix of the Privoxy User Manual also has helpful information on
understanding actions, and action debugging.

-------------------------------------------------------------------------------

6.3. Request New Features

You are welcome to submit ideas on new features or other proposals for
improvement through our feature request tracker at http://sourceforge.net/
tracker/?atid=361118&group_id=11118.

-------------------------------------------------------------------------------

6.4. Other

For any other issues, feel free to use the mailing lists. Technically
interested users and people who wish to contribute to the project are also
welcome on the developers list! You can find an overview of all Privoxy-related
mailing lists, including list archives, at: http://sourceforge.net/mail/?
group_id=11118.

-------------------------------------------------------------------------------

7. Privoxy Copyright, License and History

Copyright   2001-2008 by Privoxy Developers <
ijbswa-developers@lists.sourceforge.net>

Some source code is based on code Copyright   1997 by Anonymous Coders and
Junkbusters, Inc. and licensed under the GNU General Public License.

Portions of this document are "borrowed" from the original Junkbuster (tm) FAQ,
and modified as appropriate for Privoxy.

-------------------------------------------------------------------------------

7.1. License

Privoxy is free software; you can redistribute it and/or modify it under the
terms of the GNU General Public License, version 2, as published by the Free
Software Foundation.

This program is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE. See the GNU General Public License for more details, which
is available from the Free Software Foundation, Inc, 51 Franklin Street, Fifth
Floor, Boston, MA 02110-1301, USA

You should have received a copy of the GNU General Public License along with
this program; if not, write to the

 Free Software
 Foundation, Inc. 51 Franklin Street, Fifth Floor
 Boston, MA 02110-1301
 USA 

-------------------------------------------------------------------------------

7.2. History

A long time ago, there was the Internet Junkbuster, by Anonymous Coders and
Junkbusters Corporation. This saved many users a lot of pain in the early days
of web advertising and user tracking.

But the web, its protocols and standards, and with it, the techniques for
forcing ads on users, give up autonomy over their browsing, and for tracking
them, keeps evolving. Unfortunately, the Internet Junkbuster did not. Version
2.0.2, published in 1998, was (and is) the last official release available from
Junkbusters Corporation. Fortunately, it had been released under the GNU GPL,
which allowed further development by others.

So Stefan Waldherr started maintaining an improved version of the software, to
which eventually a number of people contributed patches. It could already
replace banners with a transparent image, and had a first version of pop-up
killing, but it was still very closely based on the original, with all its
limitations, such as the lack of HTTP/1.1 support, flexible per-site
configuration, or content modification. The last release from this effort was
version 2.0.2-10, published in 2000.

Then, some developers picked up the thread, and started turning the software
inside out, upside down, and then reassembled it, adding many new features
along the way.

The result of this is Privoxy, whose first stable version, 3.0, was released
August, 2002.