Jon's multiple AF patch: Allow up to MAX_ACTION_FILES actionsfile options

[privoxy.git] / config

#  Sample Configuration file for Privoxy

#
# $Id: config,v 1.33 2002/04/15 19:06:43 jongfoster Exp $
#
###################################################################
#                                                                 #
#                     Table of Contents                           #
#                                                                 #
#       I. INTRODUCTION                                           #
#      II. FORMAT OF THE CONFIGURATION FILE                       #
#                                                                 #
#       1. CONFIGURATION AND LOG FILE LOCATIONS                   #
#       2. LOCAL SET-UP DOCUMENTATION                             #
#       3. DEBUGGING                                              #
#       4. ACCESS CONTROL AND SECURITY                            #
#       5. FORWARDING                                             #
#       6. WINDOWS GUI OPTIONS                                    #
#                                                                 #
###################################################################

#  I. INTRODUCTION
#  ===============
#
#  This file holds the Privoxy configuration.  If you modify this
#  file, you will need to send a couple of requests to the proxy
#  before any changes take effect.
#
#  When starting Privoxy on Unix systems, give the name of this
#  file as an argument.  On Windows systems, Privoxy will look for
#  this file with the name 'config.txt' in the same directory where
#  Privoxy is installed.
#

#  II. FORMAT OF THE CONFIGURATION FILE
#  ====================================
#
#  Configuration lines consist of an initial keyword followed by a list
#  of values, all separated by whitespace (any number of spaces or
#  tabs).  For example,
#
#  actionsfile default.action
#
#  Indicates that the actionsfile is named 'default.action'.
#
#  The '#' indicates a comment.  Any part of a line following a '#' is
#  ignored, except if the '#' is preceded by a '\'.
#
#  Thus, by placing a # at the start of an existing configuration line,
#  you can make it a comment and it will be treated as if it weren't there. 
#  This is called "commenting out" an option and can be useful.
#
#  Note that commenting out and option and leaving it at its default
#  are two completely different things! Most options behave very
#  differently when unset. See the the "Effect if unset" explanation
#  in each option's description for details.
#
#  Long lines can be continued on the next line by using a `\' as
#  the last character.
#

#   1. CONFIGURATION AND LOG FILE LOCATIONS
#   =======================================
#
#  Privoxy can (and normally does) use a number of other files for
#  additional configuration and logging. This section of the
#  configuration file tells Privoxy where to find those other files.
# 
#  1.1. confdir
#  ============
# 
#  Specifies:
#     
#      The directory where the other configuration files are located
#     
#  Type of value:
#     
#      Path name
#     
#  Default value:
#     
#      /etc/privoxy (Unix) or Privoxy installation dir (Windows)
#     
#  Effect if unset:
#     
#      Mandatory
#     
#  Notes:
#     
#      No trailing "/", please
#     
#      When development goes modular and multi-user, the blocker,
#      filter, and per-user config will be stored in subdirectories of
#      "confdir". For now, the configuration directory structure is
#      flat, except for confdir/templates, where the HTML templates for
#      CGI output reside (e.g. Privoxy's 404 error page).
#  
confdir .


#  1.2. logdir
#  ===========
#  
#  Specifies:
#     
#      The directory where all logging takes place (i.e. where logfile
#      and jarfile are located)
#     
#  Type of value:
#     
#      Path name
#     
#  Default value:
#     
#      /var/log/privoxy (Unix) or Privoxy installation dir (Windows)
#     
#  Effect if unset:
#     
#      Mandatory
#     
#  Notes:
#    
#      No trailing "/", please
#
logdir .


#  1.3. actionsfile
#  ================ 
#  
#  Specifies:
#     
#      The actions file to use
#     
#  Type of value:
#     
#      File name, relative to confdir
#     
#  Default value:
#     
#      default.action (Unix) or default.action.txt (Windows)
#     
#  Effect if unset:
#     
#      No action is taken at all. Simple neutral proxying.
#     
#  Notes:
#     
#      There is no point in using Privoxy without an actions file. There
#      are three different actions files included in the distribution,
#      with varying degrees of aggressiveness: default.action,
#      intermediate.action and advanced.action.
#
actionsfile default.action


#  1.4. filterfile
#  ===============
#  
#  Specifies:
#     
#      The filter file to use
#     
#  Type of value:
#     
#      File name, relative to confdir
#     
#  Default value:
#     
#      default.filter (Unix) or default.filter.txt (Windows)
#    
#  Effect if unset:
#     
#      No textual content filtering takes place, i.e. all +filter{name}
#      actions in the actions file are turned off
#     
#  Notes:
#     
#      The "default.filter" file contains content modification rules
#      that use "regular expressions". These rules permit powerful
#      changes on the content of Web pages, e.g., you could disable your
#      favorite JavaScript annoyances, re-write the actual displayed
#      text, or just have some fun replacing "Microsoft" with
#      "MicroSuck" wherever it appears on a Web page.
# 
filterfile default.filter


#  1.5. logfile
#  ============
#  
#  Specifies:
#     
#      The log file to use
#     
#  Type of value:
#     
#      File name, relative to logdir
#     
#  Default value:
#     
#      logfile (Unix) or privoxy.log (Windows)
#     
#  Effect if unset:
#     
#      No log file is used, all log messages go to the console
#      (stderr).
#     
#  Notes:
#     
#      The windows version will additionally log to the console.
#     
#      The logfile is where all logging and error messages are written.
#      The level of detail and number of messages are set with the debug
#      option (see below). The logfile can be useful for tracking down a
#      problem with Privoxy (e.g., it's not blocking an ad you think it
#      should block) but in most cases you probably will never look at
#      it.
#     
#      Your logfile will grow indefinitely, and you will probably want
#      to periodically remove it. On Unix systems, you can do this with
#      a cron job (see "man cron"). For Red Hat, a logrotate script has
#      been included.
#    
#      On SuSE Linux systems, you can place a line like
#      "/var/log/privoxy.* +1024k 644 nobody.nogroup" in /etc/logfiles,
#      with the effect that cron.daily will automatically archive, gzip,
#      and empty the log, when it exceeds 1M size.
#    
# 
logfile logfile


#  1.6. jarfile
#  ============
#  
#  Specifies:
#     
#      The file to store intercepted cookies in
#     
#  Type of value:
#     
#      File name, relative to logdir
#     
#  Default value:
#     
#      jarfile (Unix) or privoxy.jar (Windows)
#     
#  Effect if unset:
#     
#      Intercepted cookies are not stored at all.
#     
#  Notes:
#     
#      The jarfile may grow to ridiculous sizes over time.
# 
jarfile jarfile


#  1.7. trustfile
#  ==============
#  
#  Specifies:
#     
#      The trust file to use
#     
#  Type of value:
#     
#      File name, relative to confdir
#     
#  Default value:
#     
#      Unset (commented out). When activated: trust (Unix) or trust.txt
#      (Windows)
#     
#  Effect if unset:
#    
#      The whole trust mechanism is turned off.
#     
#  Notes:
#     
#      The trust mechanism is an experimental feature for building
#      white-lists and should be used with care. It is NOT recommended
#      for the casual user.
#     
#      If you specify a trust file, Privoxy will only allow access to
#      sites that are named in the trustfile. You can also mark sites as
#      trusted referrers (with +), with the effect that access to
#      untrusted sites will be granted, if a link from a trusted
#      referrer was used. The link target will then be added to the
#      "trustfile". Possible applications include limiting Internet
#      access for children.
#     
#      If you use + operator in the trust file, it may grow considerably
#      over time.
#  
#trustfile trust


#  2. LOCAL SET-UP DOCUMENTATION
#  =============================
#  
#  If you intend to operate Privoxy for more users that just yourself,
#  it might be a good idea to let them know how to reach you, what you
#  block and why you do that, your policies etc.
#  
#
#  2.1. trust-info-url
#  ===================
#  
#  Specifies:
#     
#      A URL to be displayed in the error page that users will see if
#      access to an untrusted page is denied.
#     
#  Type of value:
#     
#      URL
#     
#  Default value:
#     
#      Two example URL are provided
#     
#  Effect if unset:
#     
#      No links are displayed on the "untrusted" error page.
#     
#  Notes:
#    
#      The value of this option only matters if the experimental trust
#      mechanism has been activated. (See trustfile above.)
#     
#      If you use the trust mechanism, it is a good idea to write up
#      some on-line documentation about your trust policy and to specify
#      the URL(s) here. Use multiple times for multiple URLs.
#     
#      The URL(s) should be added to the trustfile as well, so users
#      don't end up locked out from the information on why they were
#      locked out in the first place!
#    
trust-info-url http://www.example.com/why_we_block.html
trust-info-url http://www.example.com/what_we_allow.html


#  2.2. admin-address
#  ==================
#  
#  Specifies:
#     
#      An email address to reach the proxy administrator.
#     
#  Type of value:
#     
#      Email address
#     
#  Default value:
#     
#      Unset
#     
#  Effect if unset:
#     
#      No email address is displayed on error pages and the CGI user
#      interface.
#     
#  Notes:
#     
#      Highly recommended for multi-user installations.
#
#      If both admin-address and proxy-info-url are unset, the whole
#      "Local Privoxy Support" box on all generated pages will not be
#      shown.
#
#admin-address privoxy-admin@example.com


#  2.3. proxy-info-url
#  ===================
#  
#  Specifies:
#     
#      A URL to documentation about the local Privoxy setup,
#      configuration or policies.
#     
#  Type of value:
#     
#      URL
#     
#  Default value:
#     
#      Unset
#     
#  Effect if unset:
#     
#      No link to local documentation is displayed on error pages and
#      the CGI user interface.
#     
#  Notes:
#     
#      If both admin-address and proxy-info-url are unset, the whole
#      "Local Privoxy Support" box on all generated pages will not be
#      shown.
#     
#      This URL shouldn't be blocked ;-)
#  
#proxy-info-url http://www.example.com/proxy-service.html


#  3. DEBUGGING
#  ============
#  
#  These options are mainly useful when tracing a problem. Note that you
#  might also want to invoke Privoxy with the --no-daemon command line
#  option when debugging.
# 
# 
#  3.1. debug
#  ==========
#  
#  Specifies:
#     
#      Key values that determine what information gets logged.
#     
#  Type of value:
#     
#      Integer values
#     
#  Default value:
#     
#      12289 (i.e.: URLs plus warnings and errors)
#     
#  Effect if unset:
#     
#      Nothing gets logged.
#     
#  Notes:
#     
#      The available debug levels are:
#     
#        debug         1 # show each GET/POST/CONNECT request             
#        debug         2 # show each connection status                    
#        debug         4 # show I/O status                                
#        debug         8 # show header parsing                            
#        debug        16 # log all data into the logfile                  
#        debug        32 # debug force feature                            
#        debug        64 # debug regular expression filter                
#        debug       128 # debug fast redirects                           
#        debug       256 # debug GIF de-animation                         
#        debug       512 # Common Log Format                              
#        debug      1024 # debug kill pop-ups                             
#        debug      4096 # Startup banner and warnings               
#        debug      8192 # Non-fatal errors                               
#                                                                         
#     
#      To select multiple debug levels, you can either add them or use
#      multiple debug lines.
#    
#      A debug level of 1 is informative because it will show you each
#      request as it happens. 1, 4096 and 8192 are highly recommended so
#      that you will notice when things go wrong. The other levels are
#      probably only of interest if you are hunting down a specific
#      problem. They can produce a hell of an output (especially 16).
#     
#      The reporting of fatal errors (i.e. ones which crash Privoxy) is
#      always on and cannot be disabled.
#     
#      If you want to use CLF (Common Log Format), you should set "debug
#      512" ONLY and not enable anything else.
#  
debug   1    # show each GET/POST/CONNECT request
debug   4096 # Startup banner and warnings
debug   8192 # Errors - *we highly recommended enabling this*


#  3.2. single-threaded
#  ====================
#  
#  Specifies:
#     
#      Whether to run only one server thread
#     
#  Type of value:
#     
#      None
#     
#  Default value:
#    
#      Unset
#    
#  Effect if unset:
#     
#      Multi-threaded (or, where unavailable: forked) operation, i.e.
#      the ability to serve multiple requests simultaneously.
#     
#  Notes:
#     
#      This option is only there for debug purposes and you should never
#      need to use it. It will drastically reduce performance.
#    
#single-threaded


#  4. ACCESS CONTROL AND SECURITY
#  ==============================
#  
#  This section of the config file controls the security-relevant
#  aspects of Privoxy's configuration.
# 
# 
#  4.1. listen-address
#  ===================
#  
#  Specifies:
#     
#      The IP address and TCP port on which Privoxy will listen for
#      client requests.
#     
#  Type of value:
#     
#      [IP-Address]:Port
#     
#  Default value:
#     
#      localhost:8118
#     
#  Effect if unset:
#     
#      Bind to localhost (127.0.0.1), port 8118. This is suitable and
#      recommended for home users who run Privoxy on the same machine as
#      their browser.
#    
#  Notes:
#     
#      You will need to configure your browser(s) to this proxy address
#      and port.
#     
#      If you already have another service running on port 8118, or if
#      you want to serve requests from other machines (e.g. on your
#      local network) as well, you will need to override the default.
#     
#      If you leave out the IP address, Privoxy will bind to all
#      interfaces (addresses) on your machine and may become reachable
#      from the Internet. In that case, consider using access control
#      lists (acl's) (see "ACLs" below), or a firewall.
#     
#  Example:
#     
#      Suppose you are running Privoxy on a machine which has the
#      address 192.168.0.1 on your local private network (192.168.0.0)
#      and has another outside connection with a different address. You
#      want it to serve requests from inside only:
#     
#        listen-address  192.168.0.1:8118                                 
#                                                                        
listen-address 127.0.0.1:8118

 
#  4.2. toggle
#  ===========
#  
#  Specifies:
#     
#      Initial state of "toggle" status
#     
#  Type of value:
#     
#      1 or 0
#     
#  Default value:
#     
#      1
#     
#  Effect if unset:
#     
#      Act as if toggled on
#     
#  Notes:
#    
#      If set to 0, Privoxy will start in "toggled off" mode, i.e.
#      behave like a normal, content-neutral proxy. See
#      enable-remote-toggle below. This is not really useful anymore,
#      since toggling is much easier via the web interface then via
#      editing the conf file.
#     
#      The windows version will only display the toggle icon in the
#      system tray if this option is present.
#    
# 
toggle 1


#  4.3. enable-remote-toggle
#  =========================
#  
#  Specifies:
#     
#      Whether or not the web-based toggle feature may be used
#     
#  Type of value:
#     
#      0 or 1
#     
#  Default value:
#     
#      1
#     
#  Effect if unset:
#     
#      The web-based toggle feature is disabled.
#     
#  Notes:
#     
#      When toggled off, Privoxy acts like a normal, content-neutral
#      proxy, i.e. it acts as if none of the actions applied to any
#      URL.
#     
#      For the time being, access to the toggle feature can not be
#      controlled separately by "ACLs" or HTTP authentication, so that
#      everybody who can access Privoxy (see "ACLs" and listen-address
#      above) can toggle it for all users. So this option is not
#      recommended for multi-user environments with untrusted users.
#     
#      Note that you must have compiled Privoxy with support for this
#      feature, otherwise this option has no effect.
#    
enable-remote-toggle 1


#  4.4. enable-edit-actions
#  ========================
#  
#  Specifies:
#     
#      Whether or not the web-based actions file editor may be used
#     
#  Type of value:
#     
#      0 or 1
#     
#  Default value:
#     
#      1
#     
#  Effect if unset:
#     
#      The web-based actions file editor is disabled.
#     
#  Notes:
#     
#      For the time being, access to the editor can not be controlled
#      separately by "ACLs" or HTTP authentication, so that everybody
#      who can access Privoxy (see "ACLs" and listen-address above) can
#      modify its configuration for all users. So this option is not
#      recommended for multi-user environments with untrusted users.
#     
#      Note that you must have compiled Privoxy with support for this
#      feature, otherwise this option has no effect.
#    
enable-edit-actions 1


#  4.5. ACLs: permit-access and deny-access
#  ========================================
#  
#  Specifies:
#     
#      Who can access what.
#     
#  Type of value:
#     
#      src_addr[/src_masklen] [dst_addr[/dst_masklen]]
#     
#      Where src_addr and dst_addr are IP addresses in dotted decimal
#      notation or valid DNS names, and src_masklen and dst_masklen are
#      subnet masks in CIDR notation, i.e. integer values from 2 to 32
#      representing the length (in bits) of the network address. The
#      masks and the whole destination part are optional.
#    
#  Default value:
#     
#      Unset
#     
#  Effect if unset:
#     
#      Don't restrict access further than implied by listen-address
#     
#  Notes:
#     
#      Access controls are included at the request of ISPs and systems
#      administrators, and are not usually needed by individual users.
#      For a typical home user, it will normally suffice to ensure that
#      Privoxy only listens on the localhost or internal (home) network
#      address by means of the listen-address option.
#     
#      Please see the warnings in the FAQ that this proxy is not
#      intended to be a substitute for a firewall or to encourage anyone
#      to defer addressing basic security weaknesses.
#     
#      Multiple ACL lines are OK. If any ACLs are specified, then the
#      Privoxy talks only to IP addresses that match at least one
#      permit-access line and don't match any subsequent deny-access
#      line. In other words, the last match wins, with the default being
#      deny-access.
#     
#      If Privoxy is using a forwarder (see forward below) for a
#      particular destination URL, the dst_addr that is examined is the
#      address of the forwarder and NOT the address of the ultimate
#      target. This is necessary because it may be impossible for the
#      local Privoxy to determine the IP address of the ultimate target
#      (that's often what gateways are used for).
#     
#      You should prefer using IP addresses over DNS names, because the
#      address lookups take time. All DNS names must resolve! You can
#      not use domain patterns like "*.org" or partial domain names. If
#      a DNS name resolves to multiple IP addresses, only the first one
#      is used.
#     
#      Denying access to particular sites by ACL may have undesired side
#      effects if the site in question is hosted on a machine which also
#      hosts other sites.
#     
#  Examples:
#     
#      Explicitly define the default behavior if no ACL and
#      listen-address are set: "localhost" is OK. The absence of a
#      dst_addr implies that all destination addresses are OK:
#     
#        permit-access  localhost                                         
#                                                                        
#    
#      Allow any host on the same class C subnet as www.privoxy.org
#      access to nothing but www.example.com:
#     
#        permit-access  www.privoxy.org/24 www.example.com/32             
#                                                                         
#     
#      Allow access from any host on the 26-bit subnet 192.168.45.64 to
#      anywhere, with the exception that 192.168.45.73 may not access
#      www.dirty-stuff.example.com:
#     
#        permit-access  192.168.45.64/26                                  
#        deny-access    192.168.45.73    www.dirty-stuff.example.com      
#                                                                        


#  4.6. buffer-limit
#  =================
#  
#  Specifies:
#     
#      Maximum size of the buffer for content filtering.
#     
#  Type of value:
#     
#      Size in Kbytes
#     
#  Default value:
#     
#      4096
#     
#  Effect if unset:
#     
#      Use a 4MB (4096 KB) limit.
#     
#  Notes:
#     
#      For content filtering, i.e. the +filter and +deanimate-gif
#      actions, it is necessary that Privoxy buffers the entire document
#      body. This can be potentially dangerous, since a server could
#      just keep sending data indefinitely and wait for your RAM to
#      exhaust -- with nasty consequences. Hence this option.
#     
#      When a document buffer size reaches the buffer-limit, it is
#      flushed to the client unfiltered and no further attempt to filter
#      the rest of the document is made. Remember that there may be
#      multiple threads running, which might require up to buffer-limit
#      Kbytes each, unless you have enabled "single-threaded" above.
#    
buffer-limit 4096


#  5. FORWARDING
#  =============
#  
#  This feature allows routing of HTTP requests through a chain of
#  multiple proxies. It can be used to better protect privacy and
#  confidentiality when accessing specific domains by routing requests
#  to those domains through an anonymous public proxy (see e.g.
#  http://www.multiproxy.org/anon_list.htm) Or to use a caching proxy to
#  speed up browsing. Or chaining to a parent proxy may be necessary
#  because the machine that Privoxy runs on has no direct Internet
#  access.
#  
#  Also specified here are SOCKS proxies. Privoxy supports the SOCKS 4
#  and SOCKS 4A protocols.
# 


#  5.1. forward
#  ============
#
#  Specifies:
#     
#      To which parent HTTP proxy specific requests should be routed.
#     
#  Type of value:
#     
#      target_domain[:port] http_parent[:port]
#     
#      Where target_domain is a domain name pattern (see the chapter on
#      domain matching in the actions file), http_parent is the address
#      of the parent HTTP proxy as an IP addresses in dotted decimal
#      notation or as a valid DNS name (or "." to denote "no
#      forwarding", and the optional port parameters are TCP ports, i.e.
#      integer values from 1 to 64535
#     
#  Default value:
#     
#      Unset
#     
#  Effect if unset:
#     
#      Don't use parent HTTP proxies.
#     
#  Notes:
#     
#      If http_parent is ".", then requests are not forwarded to another
#      HTTP proxy but are made directly to the web servers.
#     
#      Multiple lines are OK, they are checked in sequence, and the last
#      match wins.
#     
#  Examples:
#    
#      Everything goes to an example anonymizing proxy, except SSL on
#      port 443 (which it doesn't handle):
#     
#        forward   .*     anon-proxy.example.org:8080                     
#        forward   :443   .                                               
#                                                                         
#     
#      Everything goes to our example ISP's caching proxy, except for
#      requests to that ISP's sites:
#     
#        forward   .*.                caching-proxy.example-isp.net:8000  
#        forward   .example-isp.net   .                                   
#                                                                         


#  5.2. forward-socks4 and forward-socks4a
#  =======================================
#
#  Specifies:
#     
#      Through which SOCKS proxy (and to which parent HTTP proxy)
#      specific requests should be routed.
#     
#  Type of value:
#     
#      target_domain[:port] socks_proxy[:port] http_parent[:port]
#     
#      Where target_domain is a domain name pattern (see the chapter on
#      domain matching in the actions file), http_parent and socks_proxy
#      are IP addresses in dotted decimal notation or valid DNS names
#      (http_parent may be "." to denote "no HTTP forwarding"), and the
#      optional port parameters are TCP ports, i.e. integer values from
#      1 to 64535
#     
#  Default value:
#     
#      Unset
#     
#  Effect if unset:
#     
#      Don't use SOCKS proxies.
#     
#  Notes:
#     
#      Multiple lines are OK, they are checked in sequence, and the last
#      match wins.
#     
#      The difference between forward-socks4 and forward-socks4a is that
#      in the SOCKS 4A protocol, the DNS resolution of the target
#      hostname happens on the SOCKS server, while in SOCKS 4 it happens
#      locally.
#    
#      If http_parent is ".", then requests are not forwarded to another
#      HTTP proxy but are made (HTTP-wise) directly to the web servers,
#      albeit through a SOCKS proxy.
#     
#  Examples:
#     
#      From the company example.com, direct connections are made to all
#      "internal" domains, but everything outbound goes through their
#      ISP's proxy by way of example.com's corporate SOCKS 4A gateway to
#      the Internet.
#     
#        forward-socks4a   .*.           socks-gw.example.com:1080  www-cache.example-isp.net:8080 
#        forward           .example.com   .
#                                                                                                  
#    
#      A rule that uses a SOCKS 4 gateway for all destinations but no
#      HTTP parent looks like this:
#     
#        forward-socks4   .*.            socks-gw.example.com:1080  .     
#                                                                         
#      See the user manual for more advanced examples.
#    


#  6. WINDOWS GUI OPTIONS
#  ======================
#  
#  Privoxy has a number of options specific to the Windows GUI
#  interface:
#  
#  If "activity-animation" is set to 1, the Privoxy icon will animate
#  when "Privoxy" is active. To turn off, set to 0.
# 
#activity-animation 1

#  If "log-messages" is set to 1, Privoxy will log messages to the
#  console window:
# 
#log-messages 1
   
#  If "log-buffer-size" is set to 1, the size of the log buffer, i.e.
#  the amount of memory used for the log messages displayed in the
#  console window, will be limited to "log-max-lines" (see below).
#  
#  Warning: Setting this to 0 will result in the buffer to grow
#  infinitely and eat up all your memory!
# 
#log-buffer-size 1

#  log-max-lines is the maximum number of lines held in the log buffer.
#  See above.
# 
#log-max-lines 200

#  If "log-highlight-messages" is set to 1, Privoxy will highlight
#  portions of the log messages with a bold-faced font:
# 
#log-highlight-messages 1
#    
 
#  The font used in the console window:
# 
#log-font-name Comic Sans MS
#    
 
#  Font size used in the console window:
# 
#log-font-size 8
#    
 
#  "show-on-task-bar" controls whether or not Privoxy will appear as a
#  button on the Task bar when minimized:
# 
#show-on-task-bar 0
#    
 
#  If "close-button-minimizes" is set to 1, the Windows close button
#  will minimize Privoxy instead of closing the program (close with the
#  exit option on the File menu).
# 
#close-button-minimizes 1
#    
 
#  The "hide-console" option is specific to the MS-Win console version
#  of Privoxy. If this option is used, Privoxy will disconnect from and
#  hide the command console.
# 
#hide-console
#