1 # Note: Makefile is built automatically from Makefile.in
3 # $Id: GNUmakefile.in,v 1.141 2006/08/12 03:54:37 david__schmidt Exp $
5 # Written by and Copyright (C) 2001 - 2004 the SourceForge
6 # Privoxy team. http://www.privoxy.org/
8 # Based on the Internet Junkbuster originally written
9 # by and Copyright (C) 1997 Anonymous Coders and
10 # Junkbusters Corporation. http://www.junkbusters.com
12 # This program is free software; you can redistribute it
13 # and/or modify it under the terms of the GNU General
14 # Public License as published by the Free Software
15 # Foundation; either version 2 of the License, or (at
16 # your option) any later version.
18 # This program is distributed in the hope that it will
19 # be useful, but WITHOUT ANY WARRANTY; without even the
20 # implied warranty of MERCHANTABILITY or FITNESS FOR A
21 # PARTICULAR PURPOSE. See the GNU General Public
22 # License for more details.
24 # The GNU General Public License should be included with
25 # this file. If not, you can view it at
26 # http://www.gnu.org/copyleft/gpl.html
27 # or write to the Free Software Foundation, Inc., 59
28 # Temple Place - Suite 330, Boston, MA 02111-1307, USA.
31 #############################################################################
32 # Set make command correctly
33 #############################################################################
36 #############################################################################
37 # Version number (for RPM)
38 #############################################################################
40 VERSION_MAJOR = @VERSION_MAJOR@
41 VERSION_MINOR = @VERSION_MINOR@
42 VERSION_POINT = @VERSION_POINT@
43 CODE_STATUS = @CODE_STATUS@
44 VERSION = $(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_POINT)
45 RPM_VERSION = $(VERSION)
47 SNAPVERSION = $(RPM_VERSION)-$(shell date "+%Y%m%d")
50 #############################################################################
51 # "make install" directories and variables
52 #############################################################################
59 exec_prefix = @exec_prefix@
60 CONF_BASE = @sysconfdir@
63 MAN_DEST = $(MAN_DIR)/man1
64 SHARE_DEST = @datadir@
65 DOC_DEST = $(SHARE_DEST)/doc/privoxy
66 VAR_DEST = @localstatedir@
67 LOGS_DEST = $(VAR_DEST)/log/privoxy
68 PIDS_DEST = $(VAR_DEST)/run
70 # if $prefix = /usr/local then the default CONFDEST change from
71 # CONF_DEST = $(CONF_BASE) to CONF_DEST = $(CONF_BASE)/privoxy
72 # by the target rule CONF_DEST
74 # also if the $prefix is /usr/local and there is no
75 # $(SHARE_DEST)/doc, it checks for $prefix/doc and installs there
76 # instead in this situation
78 # finally if $prefix=/usr/local and VAR_DEST=$prefix/var it
79 # changes this to /var for storing the logs and pidfile
81 # used in source dir only, the install goes to $share_dest/doc/privoxy
82 DOK_WEB = doc/webserver/
84 # Install usage should be compatible with install-sh.
88 # Support files, docs, etc.
92 # Files daemon writes to.
94 INSTALL_P = -m $(BIN_MODE)
95 INSTALL_T = -m $(RA_MODE)
96 INSTALL_D = -m $(DIR_MODE) -d
97 INSTALL_R = -m $(RWD_MODE)
99 # install options for superuser install
100 #INSTALL_S = -g @GROUP@ -o @USER@
102 #############################################################################
104 #############################################################################
106 PROGRAM = privoxy@EXEEXT@
111 # id -u is not universal. FIXME: need to set from configure. Breaks on
119 MKDIR = ./mkinstalldirs
135 WDUMP = @WDUMP@ -dump
138 DB = $(JADEBIN) $(JADECAT) -ihtml -t sgml -D.. -d ldp.dsl\#html
140 MAN2HTML = @MAN2HTML@
141 G2H_CMD = groff -mandoc -Thtml
145 DOC_TMP = $(DOC_DIR)/tmp
146 DOC_STATUS = @DOC_STATUS@
148 # Program to do LF->CRLF
150 # The sed version should be the most portable, but it doesn't for for me,
151 # the other two do. FIXME.
153 #DOSFILTER = $(SED) -e $$'s,$$,\r,'
154 #DOSFILTER = gawk -v ORS='\r\n' '{print $0;}'
155 DOSFILTER = $(PERL) -p -e 's/\n/\r\n/'
156 CVSROOT = :pserver:anonymous@cvs.ijbswa.sourceforge.net:/cvsroot/ijbswa
157 #TMPDIR := $(shell mktemp -d /tmp/$(PROGRAM).XXXXXX)
159 #############################################################################
160 # Setup for make distribution rh and suse for now
161 #############################################################################
163 TAR_ARCH = /tmp/privoxy-$(RPM_VERSION).tar.gz
164 RPM_BASE = @RPM_BASE@
166 #############################################################################
167 # We include these files in our distributions
168 #############################################################################
169 CONFIGS = config trust default.action standard.action user.action default.filter user.filter
170 # take care that no CVS .cvsignore or other crappy files
172 # and escape every '#' in the find. doh.
173 CONFIG_FILES = $(CONFIGS) \
174 `find templates/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"`
176 DOC_FILES = AUTHORS LICENSE README ChangeLog INSTALL \
177 `find doc/text/ -type f | grep -v "CVS" | grep -v "\.\#" | grep -v ".*~" | grep -v ".cvsignore" | grep -v "TAGS"` \
178 `find doc/webserver/ -name "*.html" | grep -v "\(webserver\|team\)\/index\.html"` \
179 `find doc/webserver/ -name "*.css"` \
183 #############################################################################
184 # Filenames and libraries
185 #############################################################################
187 C_SRC = actions.c cgi.c cgiedit.c cgisimple.c deanimate.c encode.c \
188 errlog.c filters.c gateway.c jbsockets.c jcc.c killpopup.c \
189 list.c loadcfg.c loaders.c miscutil.c parsers.c ssplit.c \
192 C_OBJS = $(C_SRC:.c=.@OBJEXT@)
193 C_HDRS = $(C_SRC:.c=.h) project.h actionlist.h
195 W32_SRC = @WIN_ONLY@w32log.c w32taskbar.c win32.c w32svrapi.c
196 W32_FILES = @WIN_ONLY@w32.res
197 W32_OBJS = @WIN_ONLY@$(W32_SRC:.c=.@OBJEXT@) $(W32_FILES)
198 W32_HDRS = @WIN_ONLY@w32log.h w32taskbar.h win32.h w32res.h w32svrapi.h
199 W32_LIB = @WIN_ONLY@-lwsock32 -lcomctl32
200 W32_INIS = @WIN_ONLY@config.txt trust.txt
202 PCRS_SRC = @STATIC_PCRS_ONLY@pcrs.c
203 PCRS_OBJS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.@OBJEXT@)
204 PCRS_HDRS = @STATIC_PCRS_ONLY@$(PCRS_SRC:.c=.h)
206 PCRE_SRC = @STATIC_PCRE_ONLY@pcre/get.c pcre/maketables.c pcre/study.c pcre/pcre.c
207 PCRE_OBJS = @STATIC_PCRE_ONLY@$(PCRE_SRC:.c=.@OBJEXT@)
208 PCRE_HDRS = @STATIC_PCRE_ONLY@pcre/config.h pcre/chartables.c pcre/internal.h pcre/pcre.h
210 # No REGEX (maybe because dynamically linked pcreposix):
212 @STATIC_PCRE_ONLY@REGEX_SRC = pcre/pcreposix.c
214 REGEX_OBJS = $(REGEX_SRC:.c=.@OBJEXT@)
215 REGEX_HDRS = $(REGEX_SRC:.c=.h)
217 # Dependencies introduced by #include "project.h".
218 PROJECT_H_DEPS = project.h $(REGEX_HDRS) $(PCRS_HDRS) @STATIC_PCRE_ONLY@pcre/pcre.h
220 # Socket libraries for platforms that need them explicitly defined
221 SOCKET_LIB = @SOCKET_LIB@
223 # PThreads library, if needed.
224 PTHREAD_LIB = @PTHREAD_ONLY@@PTHREAD_LIB@
226 SRCS = $(C_SRC) $(W32_SRC) $(PCRS_SRC) $(PCRE_SRC) $(REGEX_SRC)
227 OBJS = $(C_OBJS) $(W32_OBJS) $(PCRS_OBJS) $(PCRE_OBJS) $(REGEX_OBJS)
228 HDRS = $(C_HDRS) $(W32_HDRS) $(PCRS_HDRS) $(PCRE_OBJS) $(REGEX_HDRS)
229 LIBS = @LIBS@ $(W32_LIB) $(SOCKET_LIB) $(PTHREAD_LIB)
232 #############################################################################
234 #############################################################################
236 # The flag "-mno-win32" can be used by Cygwin to emulate a un?x type build.
237 # The flag "-mwindows -mno-cygwin" will cause Cygwin to use MingW32 for a
239 # The flag "-pthread" is required if using Pthreads under Linux (and
240 # possibly other OSs).
241 SPECIAL_CFLAGS = @SPECIAL_CFLAGS@
243 # Add your flags here
246 CFLAGS = @CFLAGS@ @CPPFLAGS@ $(OTHER_CFLAGS) $(SPECIAL_CFLAGS) -Wall \
247 @STATIC_PCRE_ONLY@ -Ipcre
249 LDFLAGS = $(DEBUG_CFLAGS) $(SPECIAL_CFLAGS)
252 #############################################################################
255 # There should NOT be any targets above this line.
256 #############################################################################
257 all: $(PROGRAM) default.action
260 #############################################################################
262 #############################################################################
263 .PHONY: all inifiles redhat-dist redhat-upload solaris-dist suse-dist \
264 suse-upload win-dist tarball-dist dok redhat-dok webserver clean clobber tags \
265 install conectiva-spec conectiva-dist conectiva-upload CONF_DEST LOG_DEST \
266 PID_DEST check_doc install-strip uninstall GROUP_T
268 #############################################################################
269 # Define this explicitly because Solaris is broken!
270 #############################################################################
272 $(CC) -c $(CFLAGS) $(CPPFLAGS) $< -o $@
275 #############################################################################
276 # Strip master copy comments from default.action:
277 #############################################################################
278 default.action: default.action.master
279 $(GREP) -v '^#MASTER#' $< > $@
281 #############################################################################
283 #############################################################################
285 inifiles: $(W32_INIS)
288 $(SED) -e 's!\trustfile trust!trustfile trust.txt!' \
289 -e 's!\jarfile jarfile!jarfile jar.log!' \
290 -e 's!\logfile logfile!logfile privoxy.log!' \
291 -e 's!#Win32-only: !!' \
294 # LF to CRLF in default.action
295 $(DOSFILTER) <default.action >default.action.txt && mv default.action.txt default.action
296 # LF to CRLF in default.filter
297 $(DOSFILTER) <default.filter >default.filter.txt && mv default.filter.txt default.filter
300 $(DOSFILTER) < $< > $@
302 #############################################################################
304 #############################################################################
306 @if [ -d CVS ]; then \
307 $(ECHO) "***************************************************"; \
309 $(ECHO) "*** WARNING ***"; \
311 $(ECHO) "*** The presence of a CVS subdirectory suggests ***"; \
312 $(ECHO) "*** that you are trying to build a distribution ***"; \
313 $(ECHO) "*** package based on a checked out, not an ***"; \
314 $(ECHO) "*** exported copy of the source tree. Please ***"; \
315 $(ECHO) "*** see \"Releasing a new version\" in the ***"; \
316 $(ECHO) "*** developer manual. ***"; \
318 $(ECHO) "***************************************************"; \
319 $(ECHO) "Type \"yes i am sure\" if you are sure that you"; \
320 $(ECHO) -n "really want to proceed: "; \
322 if [ "$$answer" != "yes i am sure" ]; then exit 1; fi \
326 #############################################################################
327 # create tar.gz from CVS:
328 # This make-target is usually called through 'create-archive'. If you
329 # run 'make create-snapshot' without setting SNAPVERSION, you'll get a
330 # tar.gz with the current date in the name and as a releasenumber in the
331 # spec-file. But the main usage is to run it as follows (Red Hat example):
332 # make SNAPVERSION=1.6x create-snapshot
333 # This creates a tar.gz and spec-file for a Red Hat 6.x version.
334 #############################################################################
336 TMPDIR=$(shell mktemp -d /tmp/$(PROGRAM).XXXXXX)
337 @tag=`cvs -d $(CVSROOT) status Makefile | awk ' /Sticky Tag/ { print $$3 } '` 2> /dev/null; \
338 [ x"$$tag" = x"(none)" ] && tag=HEAD; \
339 echo "*** Creating package from $$tag!"; \
340 cd $(TMPDIR) ; cvs -Q -d $(CVSROOT) export -r $$tag current || echo "Um... export aborted."
341 @cd $(TMPDIR)/current; \
342 TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
343 if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
344 -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
345 privoxy-rh.spec > $$TMPFILE ; then \
346 $(MV) -f $$TMPFILE privoxy-rh.spec; \
348 $(ECHO) "Could not set version info in specfile."; \
351 if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
352 -e 's/^\(Release:\).*/\1 $(SNAPVERSION)/g' \
353 privoxy-suse.spec > $$TMPFILE ; then \
354 $(MV) -f $$TMPFILE privoxy-suse.spec; \
356 $(ECHO) "Could not set version info in specfile."; \
360 cd $(TMPDIR)/current; \
361 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude \
362 "privoxy-suse.spec" -czf $(TMPDIR)/$(PROGRAM)-rh-$(VERSION).tar.gz .; \
363 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude \
364 "privoxy-rh.spec" -czf $(TMPDIR)/$(PROGRAM)-suse-$(VERSION).tar.gz .
365 @$(MV) -f $(TMPDIR)/$(PROGRAM)-rh-$(VERSION).tar.gz .
366 @$(MV) -f $(TMPDIR)/$(PROGRAM)-suse-$(VERSION).tar.gz .
368 @echo "Resulting files are $(PROGRAM)-rh-$(VERSION).tar.gz and"
369 @echo " $(PROGRAM)-suse-$(VERSION).tar.gz"
372 #############################################################################
373 # looks at the version of Makefile and exports a corresponding source-tree
374 # example: if the Makefile has the sticky tag v_2_9_13, you'll get
375 # privoxy-*-2.4.13.tar.gz. Two different tar files will be written, one for
376 # Red Hat and one for SuSe (different spec-files)
377 #############################################################################
379 make SNAPVERSION=$(SNAPVERSION) create-snapshot
381 #############################################################################
382 # RPM specifice stuff (SuSE or Redhat, ..)
383 #############################################################################
384 rpm-stuff: dist-check clean clobber
385 for dir in RPMS SRPMS BUILD SOURCES SPECS; do \
386 if [ ! -w $(RPM_BASE)/$$dir ]; then \
387 $(ECHO) "$(RPM_BASE)/$$dir is not writable for you. Maybe try as root."; \
388 $(ECHO) "Or add a suitable path to .rpmmacros like."; \
389 $(ECHO) "%_topdir /home/foo/rpm-build"; \
395 @if [ "$(RPM_PACKAGEV)" = "" ]; then \
397 echo " ERROR: NO RPM_PACKAGEV VALUE"; \
398 echo " No value given for RPM_PACKAGEV. Please use:"; \
399 echo " make dist-upload RPM_PACKAGEV=release"; \
400 echo " where \"release\" is the release number you want to and"; \
401 echo " where \"dist\" is the name of the distro (redhat or suse)"; \
403 echo " Ex: make redhat-upload RPM_PACKAGEV=1"; \
405 echo "ATTENTION: If your distribution use a specific tag on the"; \
406 echo " release field (like \"cl\" for Conectiva, and"; \
407 echo " \"mdk\" for Mandrake), DO NOT put it on the value"; \
408 echo " given to RPM_PACKAGEV. It will be added automaticaly."; \
409 echo " Do it like you would do for a redhat package,"; \
410 echo " (i.e. just the number)."; \
416 #############################################################################
417 # Create Conectiva specfile from RedHat specfile
418 #############################################################################
420 $(RM) privoxy-cl.spec
421 chmod a+x genclspec.sh
424 #############################################################################
425 # Conectiva distribution for x86
426 #############################################################################
427 conectiva-dist: rpm-stuff conectiva-spec
429 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-rh.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
430 $(RPMBUILD) --clean -ta $(TAR_ARCH)
431 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
433 conectiva-upload: check-release
434 make redhat-upload RPM_PACKAGEV=$(RPM_PACKAGEV)cl
436 #############################################################################
437 # redhat distribution alpha and x86
438 #############################################################################
439 redhat-dist: rpm-stuff
441 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
442 $(RPMBUILD) --clean -ta $(TAR_ARCH)
443 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
445 # For testing build issues only! Use redhat-dist for official releases.
448 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-suse.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
449 $(RPMBUILD) --clean -tb $(TAR_ARCH)
450 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
451 @echo "WARNING: This target is only for testing. Use redhat-dist for releases!!!"
453 # anonymously ncftps the rpms to sourceforge
454 redhat-upload: check-release
455 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
456 # better should use `arch` here instead of ix86 to support other platforms too
457 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
458 @$(ECHO) -------------------------------------------------------
460 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
461 @$(ECHO) ... and release the files.
462 @$(ECHO) -------------------------------------------------------
463 # w3m http://sourceforge.net/project/admin/editpackages.php?group_id=11118
466 #############################################################################
467 # Creates a Red Hat sourcepackage from CVS (not from the current sources
469 #############################################################################
472 $(MV) $(PROGRAM)-rh-$(VERSION).tar.gz $(PROGRAM)-$(VERSION).tar.gz
473 $(RPMBUILD) -ts --nodeps $(PROGRAM)-$(VERSION).tar.gz
476 #############################################################################
477 # suse distribution. works fine. no need to be root.
478 #############################################################################
480 # TMPFILE=$$(mktemp -q /tmp/$(PROGRAM).XXXXXX); \
481 # if $(SED) -e 's/^\(Version:\).*/\1 $(RPM_VERSION)/g' \
482 # -e 's/^\(Release:\).*/\1 $(RPM_PACKAGEV)/g' \
483 # privoxy-suse.spec > $$TMPFILE ; then \
484 # $(MV) -f $$TMPFILE privoxy-suse.spec; \
486 # $(ECHO) "Could not set version info in specfile."; \
490 $(TAR) --exclude ".cvsignore" --exclude "CVS" --exclude "privoxy-rh.spec" --exclude "privoxy-cl.spec" --exclude "PACKAGERS" -czf $(TAR_ARCH) .
491 $(RPM) --clean -ta $(TAR_ARCH)
492 if [ -f $(TAR_ARCH) ]; then $(RM) $(TAR_ARCH); fi
494 # anonymously ncftps the rpms to sourceforge
495 suse-upload: check-release
496 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/SRPMS/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).src.rpm
497 # better should use `arch` here instead of ix86 to support other platforms too
498 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming $(RPM_BASE)/RPMS/*/privoxy-suse-$(RPM_VERSION)-$(RPM_PACKAGEV).*.rpm
499 @$(ECHO) -------------------------------------------------------
501 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
502 @$(ECHO) ... and release the files.
503 @$(ECHO) -------------------------------------------------------
505 # handle with care. use with root.
507 $(RPM) -e junkbuster-suse || true
508 $(RM) -r /etc/junkbuster
509 $(RM) -r /etc/rc.d/junkbuster*
510 $(RM) -r /var/run/junkbuster.pid
511 $(RM) -r /var/log/junkbuster
512 $(RM) /etc/init.d/junkbuster
513 $(RM) /usr/sbin/junkbuster
514 $(RM) /usr/sbin/rcjunkbuster
515 $(RM) /usr/share/man/man1/junkbuster.1.gz
516 $(RPM) -e privoxy-suse || true
517 $(RM) -r /etc/privoxy
518 $(RM) -r /etc/rc.d/privoxy*
519 $(RM) -r /var/run/privoxy.pid
520 $(RM) -r /var/log/privoxy
521 $(RM) /etc/init.d/privoxy
522 $(RM) /usr/sbin/privoxy
523 $(RM) /usr/sbin/rcprivoxy
524 $(RM) /usr/share/man/man1/privoxy.1.gz
526 #############################################################################
527 # generic distribution
528 #############################################################################
531 @$(ECHO) "You have run autoconf && autoheader && ./configure right?"
534 $(STRIP_PROG) $(PROGRAM)
535 $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
537 (cd .. && $(TAR) -cvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$(PROGRAM))
539 for foo in $(CONFIG_FILES); do \
540 (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
543 for foo in $(DOC_FILES); do \
544 (cd .. && $(TAR) -uvhf --exclude "PACKAGERS" privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar privoxy-$(VERSION)-$(CODE_STATUS)/$$foo;) \
546 # and zip the archive
547 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
548 $(GZIP_PROG) ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar
549 @$(ECHO) Distribution with binary created.
551 # anonymously ncftps the package to sourceforge
553 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar.gz
554 @$(ECHO) -------------------------------------------------------
556 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
557 @$(ECHO) ... and release the files.
558 @$(ECHO) -------------------------------------------------------
562 $(RM) privoxy-$(TARGET_OS)-$(VERSION)-$(CODE_STATUS)-src.tar*
564 #############################################################################
565 # solaris distribution. verified on SF machines by swa.
566 #############################################################################
567 solaris-dist: gen-dist
569 # anonymously ncftps the package to sourceforge
570 solaris-upload: gen-upload
573 solaris-clean: gen-clean
576 #############################################################################
578 #############################################################################
580 @$(ECHO) coming soon.
582 @$(ECHO) coming soon.
584 #############################################################################
585 # debian distribution
586 #############################################################################
588 @$(ECHO) coming soon.
590 @$(ECHO) coming soon.
592 #############################################################################
593 # macosx distribution
594 #############################################################################
596 @$(ECHO) coming soon.
598 @$(ECHO) coming soon.
600 #############################################################################
602 #############################################################################
604 @$(ECHO) coming soon.
606 @$(ECHO) coming soon.
608 #############################################################################
609 # freebsd distribution. verified on SF machines by swa.
610 #############################################################################
611 freebsd-dist: gen-dist
613 # anonymously ncftps the package to sourceforge
614 freebsd-upload: gen-upload
617 freebsd-clean: gen-clean
620 #############################################################################
621 # Windows distribution
622 #############################################################################
624 $(ECHO) Not implemented.
627 #############################################################################
628 # Tarball distribution: No CVS dirs, dotfiles, debian build dir,
629 # (FIXME:) only parts of the static / generated docs mix in doc/webserver
630 #############################################################################
632 tarball-dist: dist-check clean clobber
633 $(LN) -s current ../privoxy-$(VERSION)-$(CODE_STATUS)
635 for i in `find . -type f -a -not \( -path "*/CVS*" -o -name ".*" \
636 -o -path "*/debian/*" -o -path "*/actions/*" -o -name "*.php" -o \
637 -name "PACKAGERS" -o -path "*/pdf/*" \)`; do \
638 files="$$files privoxy-$(VERSION)-$(CODE_STATUS)/$$i"; \
640 cd .. && $(TAR) -cvhf privoxy-$(VERSION)-$(CODE_STATUS)-src.tar $$files ; \
642 # and zip the archive
643 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)
644 $(GZIP_PROG) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar
645 @$(ECHO) Tarball distribution created.
647 # anonymously ncftps the tarball to sourceforge
649 ncftpput -u anonymous -p ijbswa-developers@lists.sourceforge.net upload.sourceforge.net /incoming ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
650 @$(ECHO) -------------------------------------------------------
652 @$(ECHO) http://sourceforge.net/project/admin/editpackages.php?group_id=11118
653 @$(ECHO) ... and release the files.
654 @$(ECHO) -------------------------------------------------------
657 $(RM) ../privoxy-$(VERSION)-$(CODE_STATUS)-src.tar.gz
659 #############################################################################
663 # converts doc/source/*.sgml into html, text and man pages
665 #############################################################################
669 $(RM) doc/webserver/developer-manual/*.html
670 $(RM) -r doc/source/developer-manual
671 mkdir -p doc/text doc/source/developer-manual
672 cd doc/source/developer-manual && $(DB) ../developer-manual.sgml && cd .. && cp developer-manual/*.html ../webserver/developer-manual/
673 cd doc/source && $(DB) -V nochunks developer-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/developer-manual.txt && $(RM) -r tmp.html developer-manual
677 $(RM) doc/webserver/user-manual/*.html
678 $(RM) -r doc/source/user-manual/
679 mkdir -p doc/text doc/source/user-manual
680 cd doc/source/user-manual && $(DB) -iuser-man ../user-manual.sgml && cd .. && cp user-manual/*.html ../webserver/user-manual/
681 cd doc/source && $(DB) -iuser-man -V nochunks user-manual.sgml > tmp.html && $(WDUMP) tmp.html > ../text/user-manual.txt && $(RM) -r tmp.html user-manual
685 $(RM) doc/webserver/faq/*.html
686 $(RM) -r doc/source/faq
687 mkdir -p doc/text doc/source/faq
688 cd doc/source/faq && $(DB) ../faq.sgml && cd .. && cp faq/*.html ../webserver/faq/
689 cd doc/source && $(DB) -V nochunks faq.sgml > tmp.html && $(WDUMP) tmp.html > ../text/faq.txt && $(RM) -r tmp.html faq
691 # man page, one variation. Try to use the next target, just 'make man'.
693 $(RM) doc/man/* doc/webserver/man-page/*.html
694 ifneq ($(MAN2HTML),false)
695 $(ECHO) "<html><head><title>Privoxy Man page</title><link rel=\"stylesheet\" type=\"text/css\" href=\"../p_web.css\"></head><body><H2>NAME</H2>" > doc/webserver/man-page/privoxy-man-page.html
696 man ./privoxy.1 | $(MAN2HTML) -bare >> doc/webserver/man-page/privoxy-man-page.html
697 $(ECHO) "</body></html>" >> doc/webserver/man-page/privoxy-man-page.html
702 # Build man page from sgml. This requires the SGMLSpm perl module.
703 # See CPAN, or your favorite perl repository. This is the preferred
704 # target for man page generation!
706 mkdir -p doc/source/temp && cd doc/source/temp && $(RM) * ;\
707 nsgmls ../privoxy-man-page.sgml | sgmlspl ../../../utils/docbook2man/docbook2man-spec.pl &&\
708 perl -pi.bak -e 's/ <URL:.*>//; s/\[ /\[/g' privoxy.1 ;\
709 $(DB) ../privoxy-man-page.sgml && $(MV) -f privoxy.1 ../../../privoxy.1
711 # For those with man2html ala RH7s.
713 mkdir -p doc/webserver/man-page
714 ifneq ($(MAN2HTML),false)
715 $(MAN2HTML) privoxy.1 |grep -v "^Content-type" > tmp.html
716 $(PERL) -pi.bak -e 's/<A .*Contents<\/A>//; s/<A .*man2html<\/A>/man2html/' tmp.html
717 $(PERL) -pi.bak -e 's/(<\/HEAD>)/<LINK REL=\"STYLESHEET\" TYPE=\"text\/css\" HREF=\"..\/p_doc.css\"><\/HEAD>/' tmp.html
718 # Twice because my version of man2html is pulling in commas and periods in URLs.
719 $(PERL) -pi.bak -e 's/(<A.*),(">)/$$1$$2/g' tmp.html
720 $(PERL) -pi.bak -e 's,\.">,">,g' tmp.html
721 # Get rid of spurious
\a from conversion. (How to do this with perl?)
722 $(SED) -e 's/
\a//g' tmp.html > doc/webserver/man-page/privoxy-man-page.html && $(RM) tmp.*
728 # Otherwise we get plain groff conversion.
730 $(G2H_CMD) ./privoxy.1 | $(SED) -e 's@</head>@<link REL="STYLESHEET" TYPE="text/css" HREF="../p_doc.css"></head>@' > doc/webserver/man-page/privoxy-man-page.html
733 # readme page and INSTALL file
734 dok-readme: dok-release
735 cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html &&\
736 $(WDUMP) tmp.html > ../../README ;\
737 $(DB)-notoc -V nochunks install.sgml > tmp.html &&\
738 $(WDUMP) tmp.html > ../../INSTALL ;\
741 # index.sgml is used to create both the Home Page, and a local index
742 # for documentation, etc.
744 # index.html for webserver:
746 cd doc/source/webserver && $(DB)-notoc -ip-homepage -V nochunks index.sgml > ../../webserver/index.html
747 $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
748 s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps consumers reduce unwanted junk email and protect their privacy from direct marketing companies.\"><\/HEAD/;\
749 s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
752 doc/webserver/index.html && $(RM) doc/webserver/*.bak
754 # privoxy-index.html for local documentation:
756 cd doc/source/webserver && $(DB)-notoc -ip-index -V nochunks index.sgml > ../../webserver/privoxy-index.html
757 $(PERL) -pi.bak -e 's/..\/p_doc.css/p_doc.css/;\
758 s/<\/HEAD/\n<meta name=\"description\" content=\"Privoxy helps consumers reduce unwanted junk email and protect their privacy from direct marketing companies.\"><\/HEAD/;\
759 s/<\/HEAD/\n<meta name="MSSmartTagsPreventParsing" content="TRUE"><\/HEAD/;\
762 doc/webserver/privoxy-index.html && $(RM) doc/webserver/*.bak
764 # Main documentation target.
765 dok: dok-release dok-devel dok-user dok-faq dok-readme dok-webserver dok-authors dok-index
766 @$(ECHO) Documentation created.
769 # an alternative to the above dok. disabled man page creation for the moment
771 redhat-dok: dok-release dok-devel dok-user dok-faq redhat-readme dok-webserver dok-authors
772 @$(ECHO) Documentation created.
776 cd doc/source && $(DB)-notoc -V nochunks readme.sgml > tmp.html && $(WDUMP) \
777 tmp.html > ../../README && $(RM) -r tmp.html
781 cd doc/source && $(DB) -V nochunks authors.sgml > tmp.html && $(WDUMP) \
782 tmp.html > ../../AUTHORS && $(RM) tmp.html
784 # Set doc entities for VERSION and CODE_STATUS in sgml docs. Toggle content
785 # exceptions accordingly. This needs to go before any doc building (doh).
787 @$(ECHO) Setting doc version and status to $(VERSION), $(CODE_STATUS)
788 @$(PERL) -pi.bak -e 's/<!entity +p-version.*>/<!entity p-version "$(VERSION)">/;\
789 s/<!entity +p-status.*>/<!entity p-status "$(CODE_STATUS)">/' \
790 doc/source/*sgml doc/source/*/*sgml
791 $(RM) -r doc/source/*bak doc/source/*/*bak
792 ifeq ($(CODE_STATUS),stable)
793 @$(ECHO) Setting docs to stable $(VERSION)
794 @$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "INCLUDE">/;\
795 s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "IGNORE">/' \
796 doc/source/*sgml doc/source/*/*sgml
797 $(RM) -r doc/source/*bak doc/source/*/*bak
799 @$(ECHO) Setting docs to not stable $(VERSION)
800 @$(PERL) -pi.bak -e 's/<!entity +% +p-stable.*>/<!entity % p-stable "IGNORE">/;\
801 s/<!entity +% +p-not-stable.*>/<!entity % p-not-stable "INCLUDE">/' \
802 doc/source/*sgml doc/source/*/*sgml
803 $(RM) -r doc/source/*bak doc/source/*/*bak
806 # Generate single page html. Used only for creating pdf docs (ATM).
807 # Currently using: See http://www.easysw.com/htmldoc/pdf-o-matic.php.
808 # If using this generator, remember U-M has a couple of graphics in
809 # a parallel directory.
811 dok-shtml: dok-release
812 mkdir -p doc/source/temp # this directory not in cvs
813 cd doc/source && $(DB) -iuser-man -V nochunks user-manual.sgml > temp/privoxy-user-manual.html
814 cd doc/source && $(DB) -V nochunks developer-manual.sgml > temp/privoxy-developer-manual.html
815 cd doc/source && $(DB) -V nochunks faq.sgml > temp/privoxy-faq.html
816 # one could use html2ps and ps2pdf. well, that does not work. htmlps produces incorrect output.
818 # Make pdf docs from single page html. Requires htmldoc, see
819 # (http://www.easysw.com/htmldoc/). Note: 1.8.20 has a TOC bug.
820 # PDF docs are uploaded to webserver as zip archive.
822 @$(ECHO) -n "starting htmldoc version: ";
823 if htmldoc --version ; then : ; \
824 else $(ECHO) "WARNING: could not get htmldoc version" ; fi
825 cd utils/ldp_print && $(RM) *html *bak *jpg *tmp *pdf *zip
826 cp -f doc/source/temp/*html doc/webserver/images/*jpg utils/ldp_print
827 cd utils/ldp_print ;\
828 $(PERL) -pi.bak -e 's/\.\.\/images\///; s/(<\/?)SUB/$$1small/i;\
829 s/\.\.\/user-manual\/index\.html/privoxy-user-manual.pdf/;\
830 s/\.\.\/developer-manual\/index\.html/privoxy-developer-manual.pdf/;\
831 s/\.\.\/faq\/index\.html/privoxy-faq.pdf/' *.html ;\
832 for i in developer-manual user-manual faq; do \
833 ./ldp_print privoxy-$$i.html ;\
834 $(ECHO) DONE: privoxy-$$i.pdf ;\
836 $(MV) *.pdf ../../doc/pdf ;\
837 $(RM) -r *html *bak *jpg *pdf *zip ../../doc/source/temp
839 # Create release announcement in text and html, with short and long versions.
840 # This is a standalone target, and must be invoked directly.
841 # announce: dok-release
842 # mkdir -p $(DOC_TMP)
843 # cd $(DOC_TMP) && cp -f ../announce.sgml . && $(DB) -iannounce-big announce.sgml &&\
844 # mv -f index.html announce.html && $(WDUMP) announce.html > announce.txt
845 # cd $(DOC_TMP) && $(DB) announce.sgml &&\
846 # mv -f index.html announce-mini.html && $(WDUMP) announce-mini.html > announce-mini.txt &&\
847 # mv -f *html *txt ../../..
850 # The main Privoxy config file, generated from sgml sources.
851 # NOTE: This will require some hand editing. The new file is outputted
852 # as config.new so that problem sections can be compared to previous
853 # version. This is hardcored to w3m for html/text conversion. Also,
854 # requires the shell util 'fmt'.
855 config-file: dok-release
856 cd doc/source && $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
857 w3m -dump __tmp.html |fmt -w 70 > ../../config.new && $(RM) -r __tmp.*
858 $(PERL) -pi.bak -e 's/^1\. \@\@TITLE\@\@/ /i;\
859 /^\d\.\d\.\s+/ && tr/[a-z]/[A-Z]/;\
860 $$header_len=0 unless $$hit_header;\
863 for ($$i=1; $$i < $$header_len; $$i++) {print "=";}\
867 $$hit_header=1 if m/^(\d\.)(\d\.)(\d\.)?\s/ && s/^(\d\.)//;\
868 $$header_len = length($$_);\
869 s/^/# /; /^# #{12,}/ && s/^# #/####/;\
870 s/^.*$$// if $$hit_option;\
872 s/^\n//; s/^#\s*-{20,}//; s/ *$$//;\
873 $$hit_option=1 if s/^#\s+@@//;' config.new
875 @$(ECHO) "****************************************************"
876 @$(ECHO) "The output file is config.new."
877 @$(ECHO) "Now -- you need to hand edit the results!!!"
878 @$(ECHO) "In particular, check the Debug levels, the"
879 @$(ECHO) "permit-access, forward & socks examples and the"
880 @$(ECHO) "various user-manual examples, which all"
881 @$(ECHO) "probably got hammered."
882 @$(ECHO) "****************************************************"
884 # config file, alternate verison using lynx (perl stuff unfinished). Lynx
885 # does not do so good a job.
887 cd doc/source && $(ECHO) -e ".h2 JUSTIFY\\nJUSTIFY:FALSE" > __tmp.lynx_cfg &&\
888 $(DB)-notoc -iconfig-file -V nochunks config.sgml > __tmp.html &&\
889 lynx -cfg=__tmp.lynx_cfg -width=78 -dump __tmp.html > ../../config.new && $(RM) -r __tmp.*
890 $(PERL) -pi -e 's/^( )//;\
891 s/:$\/:\n/' config.new
893 #############################################################################
897 # moves dokumentation to webserver
899 #############################################################################
901 @$(ECHO) -------------------------------------------------------
902 @$(ECHO) You have run make dok/redhat-dok before, right?
903 @$(ECHO) Note that this command scps all stuff to the webserver,
904 @$(ECHO) it will not remove obsolete documents.
905 @$(ECHO) -------------------------------------------------------
907 @$(ECHO) Uploading html
909 upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
910 $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/; tar xvm 2>&1 | grep -v timestamp'
912 @$(ECHO) Uploading pdf
914 zip privoxy-pdf-docs *.pdf ;\
915 scp -q privoxy-pdf-docs.zip ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/pdf
917 @$(ECHO) Fixing permissions
918 @ssh ijbswa.sourceforge.net 'chmod -R 775 /home/groups/i/ij/ijbswa/htdocs 2>/dev/null; true'
919 @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/ -type f | xargs chmod 664 2>/dev/null; true'
920 @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null; true'
925 @cd doc/webserver/actions; \
926 upload=`find . -type f -a -not \( -path "*/CVS*" -o -path "*/results*" \)`; \
927 $(TAR) c $$upload | ssh ijbswa.sourceforge.net 'cd /home/groups/i/ij/ijbswa/htdocs/actions; tar xvm'
929 @$(ECHO) Fixing permissions
930 @ssh ijbswa.sourceforge.net 'find /home/groups/i/ij/ijbswa/htdocs/actions/ -type f | xargs chmod 664 2>/dev/null'
931 @ssh ijbswa.sourceforge.net 'chmod 666 /home/groups/i/ij/ijbswa/htdocs/actions/results/actions-feedback.txt 2>/dev/null'
935 tar --exclude ".cvsignore" --exclude "CVS" --exclude "source" --exclude ".htaccess" \
936 --exclude "obsolete" --exclude "actions" --exclude "*.zip" --exclude "robots.txt"\
937 doc/* INSTALL LICENSE AUTHORS README \
939 $(ECHO) "Uploading doc package ..." ;\
940 scp $(DOC_FILE) ijbswa.sourceforge.net:/home/groups/i/ij/ijbswa/htdocs/docs/
941 @ssh ijbswa.sourceforge.net 'chmod 775 /home/groups/i/ij/ijbswa/htdocs/docs/*gz 2>/dev/null; true'
946 $(WGET) http://privoxy.org/docs/$(DOC_FILE) ;\
947 $(TAR) -zxvf $(DOC_FILE)
950 #############################################################################
951 # Source file dependencies
952 #############################################################################
954 actions.@OBJEXT@: actions.c actions.h config.h $(PROJECT_H_DEPS) errlog.h jcc.h list.h loaders.h miscutil.h actionlist.h ssplit.h
955 cgi.@OBJEXT@: cgi.c cgi.h config.h $(PROJECT_H_DEPS) cgiedit.h cgisimple.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
956 cgiedit.@OBJEXT@: cgiedit.c cgiedit.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
957 cgisimple.@OBJEXT@: cgisimple.c cgisimple.h config.h $(PROJECT_H_DEPS) cgi.h list.h pcrs.h encode.h ssplit.h jcc.h filters.h actions.h errlog.h miscutil.h
958 deanimate.@OBJEXT@: deanimate.c deanimate.h config.h $(PROJECT_H_DEPS)
959 encode.@OBJEXT@: encode.c encode.h config.h
960 errlog.@OBJEXT@: errlog.c errlog.h config.h $(PROJECT_H_DEPS) @WIN_ONLY@w32log.h
961 filters.@OBJEXT@: filters.c filters.h config.h $(PROJECT_H_DEPS) errlog.h encode.h gateway.h jbsockets.h jcc.h loadcfg.h parsers.h ssplit.h cgi.h deanimate.h @WIN_ONLY@win32.h
962 gateway.@OBJEXT@: gateway.c gateway.h config.h $(PROJECT_H_DEPS) errlog.h jbsockets.h jcc.h loadcfg.h
963 jbsockets.@OBJEXT@: jbsockets.c jbsockets.h config.h $(PROJECT_H_DEPS) filters.h
964 jcc.@OBJEXT@: jcc.c jcc.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h killpopup.h loadcfg.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h w32svrapi.h cgi.h
965 killpopup.@OBJEXT@: killpopup.c killpopup.h config.h $(PROJECT_H_DEPS) jcc.h loadcfg.h
966 list.@OBJEXT@: list.c list.h config.h $(PROJECT_H_DEPS) list.h miscutil.h
967 loadcfg.@OBJEXT@: loadcfg.c loadcfg.h config.h $(PROJECT_H_DEPS) errlog.h filters.h gateway.h jbsockets.h jcc.h killpopup.h loaders.h miscutil.h parsers.h @WIN_ONLY@w32log.h win32.h
968 loaders.@OBJEXT@: loaders.c loaders.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h gateway.h jcc.h loadcfg.h miscutil.h parsers.h ssplit.h
969 miscutil.@OBJEXT@: miscutil.c miscutil.h config.h
970 parsers.@OBJEXT@: parsers.c parsers.h config.h $(PROJECT_H_DEPS) errlog.h encode.h filters.h jbsockets.h jcc.h loadcfg.h loaders.h miscutil.h ssplit.h
971 ssplit.@OBJEXT@: ssplit.c ssplit.h config.h miscutil.h
972 urlmatch.@OBJEXT@: urlmatch.c urlmatch.h config.h $(PROJECT_H_DEPS) errlog.h miscutil.h ssplit.h
975 gnu_regex.@OBJEXT@: gnu_regex.c gnu_regex.h config.h
978 pcrs.@OBJEXT@: pcrs.c pcrs.h config.h pcre/pcre.h
981 pcre/get.@OBJEXT@: pcre/get.c pcre/config.h pcre/internal.h pcre/pcre.h
982 pcre/maketables.@OBJEXT@: pcre/maketables.c pcre/config.h pcre/internal.h pcre/pcre.h
983 pcre/pcre.@OBJEXT@: pcre/pcre.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/chartables.c
984 pcre/pcreposix.@OBJEXT@: pcre/pcreposix.c pcre/config.h pcre/internal.h pcre/pcre.h pcre/pcreposix.h
985 pcre/study.@OBJEXT@: pcre/study.c pcre/config.h pcre/internal.h pcre/pcre.h
987 # An auxiliary program makes the PCRE default character table source
989 pcre/chartables.c: pcre/dftables@EXEEXT@
990 pcre/dftables@EXEEXT@ >pcre/chartables.c
992 pcre/dftables@EXEEXT@: pcre/dftables.c pcre/maketables.c pcre/pcre.h pcre/internal.h pcre/config.h
993 $(CC) -o pcre/dftables@EXEEXT@ $(CFLAGS) pcre/dftables.c
996 w32log.@OBJEXT@: w32log.c errlog.h config.h jcc.h loadcfg.h miscutil.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h w32taskbar.h win32.h
997 w32taskbar.@OBJEXT@: w32taskbar.c config.h w32log.h w32taskbar.h
998 win32.@OBJEXT@: win32.c config.h jcc.h loadcfg.h pcre/pcre.h pcre/pcreposix.h pcrs.h project.h w32log.h win32.h w32svrapi.h
1000 w32.res: w32.rc w32res.h icons/ico00001.ico icons/ico00002.ico icons/ico00003.ico icons/ico00004.ico icons/ico00005.ico icons/ico00006.ico icons/ico00007.ico icons/ico00008.ico icons/idle.ico icons/privoxy.ico config.h
1001 windres -D__MINGW32__=0.2 -O coff -i $< -o $@
1004 @AMIGAOS_ONLY@OBJS += amiga.o
1005 @AMIGAOS_ONLY@CFLAGS += -D__AMIGAVERSION__=\"$(VERSION_MAJOR).$(VERSION_MINOR)$(VERSION_POINT)\" -D__AMIGADATE__=\"`date +%d.%m.%Y`\" -W -m68020 -noixemul -fbaserel -msmall-code
1006 @AMIGAOS_ONLY@LDFLAGS += -m68020 -noixemul -fbaserel
1007 @AMIGAOS_ONLY@LIBS = -lm /gg/lib/libb/libm020/libnix/swapstack.o
1008 @AMIGAOS_ONLY@amiga.o: amiga.c amiga.h config.h
1011 $(PROGRAM): $(OBJS) $(W32_FILES)
1012 $(LD) $(LDFLAGS) -o $(PROGRAM) $(OBJS) $(LIBS)
1015 $(RM) a.out $(OBJS) $(W32_FILES) $(W32_INIS) $(PROGRAM) default.action `find . -name TAGS -o -name tags`
1018 $(RM) `find . -name "*~"`
1019 # $(RM) `find . -name "#*#"` # what is this for??
1020 $(RM) `find . -name ".\#*"`
1023 $(RM) GNUmakefile configure config.h.in config.h config.cache config.status config.log logfile \
1024 privoxy.log core *.tar.gz *.tar privoxy-cl.spec doc/source/ldp.dsl
1025 $(RM) -r autom4te.cache
1028 # FIXME: What is all this?
1030 $(RM) cscope.* *.pdb *.lib *.exp
1034 tags: $(SRCS) $(HDRS)
1035 etags $(SRCS) $(HDRS)
1037 CONF_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(CONF_BASE)" = "$(prefix)/etc" ];then \
1038 $(ECHO) "$(CONF_BASE)/privoxy";\
1040 $(ECHO) "$(CONF_BASE)";\
1043 LOG_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(LOGS_DEST)" = "$(prefix)/var/log/privoxy" ];then \
1044 $(ECHO) "/var/log/privoxy" ;\
1046 $(ECHO) "$(LOGS_DEST)";\
1049 PID_DEST:=$(shell if [ "$(prefix)" = "/usr/local" ] && [ "$(PIDS_DEST)" = "$(prefix)/var/run" ];then \
1050 $(ECHO) "/var/run" ;\
1052 $(ECHO) "$(PIDS_DEST)";\
1055 check_doc:=$(shell if [ ! -d "$(SHARE_DEST)/doc" ] && [ "$(prefix)" = "/usr/local" ] && [ -d "$(prefix)/doc" ];then \
1061 # If USER is specified but no GROUP, assume there is a GROUP of same name.
1062 GROUP_T:=$(shell if [ x$(GROUP) = x ] && [ x$(USER) != x ];then \
1063 $(ECHO) "$(USER)" ;\
1065 $(ECHO) "$(GROUP)";\
1069 $(MAKE) install STRIP=-s
1071 # FIXME: Test USER and GROUP on Slack to make sure this works as
1074 # FIXME: id handling needs help, probably via configure, since 'id -u' is not
1075 # universally reliable (eg Solaris). Group handling could be better.
1076 # Perhaps the whole user/group validation should be done here, and simplified.
1077 PROGRAM_V = Privoxy $(VERSION)
1078 install: CONF_DEST LOG_DEST PID_DEST check_doc GROUP_T
1079 @# Quick test for valid USER.
1080 @if [ -n "$(USER)" ]; then \
1081 $(ID) $(USER) >/dev/null || exit 1;\
1083 @# Test for valid group. FIXME. USER does not have to belong to GROUP
1084 @# for file ownership purposes.
1085 # if [ -n "$(GROUP_T)" ] && [ -n "$(USER)" ] && ! $(GROUPS) $(USER) | $(GREP) "\<$(GROUP_T)\>" >/dev/null; then \
1086 # $(ECHO) Group $(GROUP_T) for User $(USER) is invalid && exit 1 ;\
1089 @$(ECHO) "Creating directories, and preparing $(PROGRAM_V) installation"
1090 $(CHMOD) $(DIR_MODE) $(MKDIR)
1091 @$(MKDIR) $(SBIN_DEST) $(prefix) $(CONF_DEST) $(CONF_DEST)/templates $(SHARE_DEST) \
1092 $(LOG_DEST) $(PID_DEST)
1093 @# Install the executable binary, strip if invoked as install-strip
1094 @test -n "$(STRIP)" &&\
1095 $(ECHO) Installing $(PROGRAM) stripped executable to $(SBIN_DEST) ||\
1096 $(ECHO) Installing $(PROGRAM) executable to $(SBIN_DEST)
1097 $(INSTALL) $(INSTALL_P) $(STRIP) $(PROGRAM) $(SBIN_DEST)
1099 @# Install the DOCS and man page. install-sh only does one file at a time.
1100 -@if [ $(check_doc) = 0 ]; then \
1103 DOC=$(prefix)/doc/privoxy ;\
1105 $(MKDIR) $$DOC $$DOC/user-manual $$DOC/faq $$DOC/developer-manual \
1106 $$DOC/man-page $$DOC/images $(MAN_DEST) ;\
1107 if [ -d "$(DOK_WEB)" ]; then \
1108 $(ECHO) Installing FAQ, Manual, and other docs to $$DOC;\
1109 for i in user-manual developer-manual faq; do \
1110 for ii in $(DOK_WEB)/$$i/*html; do \
1111 $(INSTALL) $(INSTALL_T) $$ii $$DOC/$$i;\
1114 for i in $(DOK_WEB)/images/*jpg; do \
1115 $(INSTALL) $(INSTALL_T) $$i $$DOC/images;\
1117 $(INSTALL) $(INSTALL_T) $(DOK_WEB)/man-page/*html $$DOC/man-page;\
1118 $(INSTALL) $(INSTALL_T) $(DOK_WEB)/privoxy-index.html $$DOC/index.html;\
1119 $(INSTALL) $(INSTALL_T) AUTHORS $$DOC;\
1120 $(INSTALL) $(INSTALL_T) LICENSE $$DOC;\
1121 $(INSTALL) $(INSTALL_T) README $$DOC;\
1122 $(INSTALL) $(INSTALL_T) ChangeLog $$DOC;\
1123 $(INSTALL) $(INSTALL_T) $(DOK_WEB)/p_doc.css $$DOC;\
1125 @# Not all platforms support gzipped man pages.
1126 @$(ECHO) Installing man page to $(MAN_DEST)/privoxy.1
1127 -$(INSTALL) $(INSTALL_T) privoxy.1 $(MAN_DEST)/privoxy.1
1129 @# Change the config file default directories according to the configured ones
1130 @$(ECHO) Rewriting config for this installation
1131 @if [ -f config.base ] ; then \
1132 $(CAT) config >config~ ;\
1133 $(MV) config.base config ;\
1135 $(SED) 's+confdir .+confdir $(CONF_DEST)+' config | \
1136 $(SED) 's+logdir .+logdir $(LOG_DEST)+' >config.updated
1137 $(MV) config config.base
1138 $(MV) config.updated config
1140 @# Install the config support files. Test for root install, and abort
1141 @# if there is no privoxy user, and no other user was enabled during
1142 @# configure. Later, install init script if appropriate.
1143 @$(ECHO) Installing templates to $(CONF_DEST)/templates
1144 @for i in `find templates -type f`; do \
1145 $(INSTALL) $(INSTALL_T) $$i $(CONF_DEST)/templates ;\
1148 @# FIXME: group/user validation is overly convoluted.
1149 @# If superuser install ... we require a minimum of group ownership
1150 @# of those files the daemon writes to, to be non-root owned.
1151 @if [ "`$(ID) |sed 's/(.*//' |sed 's/.*=//'`" = "0" ] ;then\
1152 if [ x$(USER) = x ] || [ $(USER) = root ]; then \
1153 if [ x$(GROUP) = x ] || [ $(GROUP) = root ]; then \
1154 if [ "`$(ID) privoxy`" ] && \
1155 $(GROUPS) privoxy | $(SED) 's/^.*://' |$(GREP) "\<privoxy\>" >/dev/null; then \
1156 $(ECHO) "Warning: Setting group owner to privoxy";\
1159 $(ECHO) "******************************************************************" ;\
1160 $(ECHO) " WARNING! WARNING! installing config files as root!" ;\
1161 $(ECHO) " It is strongly recommended to run $(PROGRAM) as a non-root user," ;\
1162 $(ECHO) " and to install the config files as that user and/or group!" ;\
1163 $(ECHO) " Please read INSTALL, and create a privoxy user and group!" ;\
1164 $(ECHO) "*******************************************************************" ;\
1170 INSTALL_CONF="$(INSTALL_R) -g $$GROUP_T " ;\
1172 $(ECHO) "Superuser install, installing config files as $(USER):$(GROUP_T)" ;\
1173 INSTALL_CONF="$(INSTALL_R) -o $(USER) -g $(GROUP_T)" ;\
1174 GROUP_T=$(GROUP_T) ;\
1177 if [ ! "`id $(USER)`" = "`id`" ] ;then \
1178 $(ECHO) "** WARNING ** current install user different from configured user!!" ;\
1179 $(ECHO) "Edit may fail." ;\
1181 INSTALL_CONF="$(INSTALL_R)" ;\
1183 $(ECHO) Installing configuration files to $(CONF_DEST);\
1184 for i in $(CONFIGS); do \
1185 if [ -s "$(CONF_DEST)/$$i" ] ; then \
1186 $(ECHO) Installing $$i as $$i.new ;\
1187 $(INSTALL) $$INSTALL_CONF $$i $(CONF_DEST)/$$i.new || exit 1;\
1190 $(INSTALL) $$INSTALL_CONF $$i $(CONF_DEST) || exit 1;\
1193 if [ -n "$$NEW" ]; then \
1194 $(CHMOD) $(RWD_MODE) $(CONF_DEST)/*.new || exit 1 ;\
1195 $(ECHO) "Warning: Older config files are preserved. Check new versions for changes!" ;\
1197 [ ! -f $(LOG_DEST)/logfile ] && $(ECHO) Creating logfiles in $(LOG_DEST) || \
1198 $(ECHO) Checking logfiles in $(LOG_DEST) ;\
1199 $(TOUCH) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || exit 1 ;\
1200 if [ x$$USER != x ]; then \
1201 $(CHOWN) $$USER $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || \
1202 $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
1204 if [ x$$GROUP_T != x ]; then \
1205 $(CHGRP) $$GROUP_T $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || \
1206 $(ECHO) "** WARNING ** current install user different from configured user. Logging may fail!!" ;\
1208 $(CHMOD) $(RWD_MODE) $(LOG_DEST)/logfile $(LOG_DEST)/jarfile || exit 1 ;\
1209 if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
1210 if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
1211 $(SED) 's+%PROGRAM%+$(PROGRAM)+' slackware/rc.privoxy.orig | \
1212 $(SED) 's+%SBIN_DEST%+$(SBIN_DEST)+' | \
1213 $(SED) 's+%CONF_DEST%+$(CONF_DEST)+' | \
1214 $(SED) 's+%USER%+$$USER+' | \
1215 $(SED) 's+%GROUP%+$(GROUP_T)+' >slackware/rc.privoxy ;\
1216 $(INSTALL) $(INSTALL_P) slackware/rc.privoxy /etc/rc.d/ ;\
1217 $(ECHO) "Installing for Slackware." ;\
1218 $(ECHO) "Dont forget to add the rc.privoxy to rc.local if you want it started at every boot" ;\
1219 elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
1220 $(ECHO) "Installing init script to /etc/rc.d/init.d/privoxy" ;\
1221 $(SED) 's,^PRIVOXY_BIN=.*,PRIVOXY_BIN="/usr/local/sbin/$(PROGRAM)",' privoxy.init |\
1222 $(SED) 's,^PRIVOXY_CONF=.*,PRIVOXY_CONF="$(CONF_DEST)/config",' |\
1223 $(SED) "s,^PRIVOXY_USER=.*,PRIVOXY_USER=$$USER," > init.tmp ;\
1224 $(INSTALL) $(INSTALL_P) init.tmp /etc/rc.d/init.d/privoxy && $(RM) init.tmp;\
1225 $(MKDIR) /etc/logrotate.d/ ;\
1226 $(ECHO) "Installing logrotate script to /etc/logrotate.d/" ;\
1227 $(INSTALL) -m 0644 privoxy.logrotate /etc/logrotate.d/privoxy ;\
1228 elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
1229 $(ECHO) "Installing generic init script to /etc/init.d/privoxy" ;\
1230 $(ECHO) "Please check that the PATHs are correct, and edit if needed." ;\
1231 $(INSTALL) $(INSTALL_P) privoxy-generic.init /etc/init.d/privoxy ;\
1234 $(ECHO) "No init script installed, install it manually if needed" ;\
1237 @$(ECHO) "$(PROGRAM_V) installation succeeded!"
1238 @$(ECHO) "The Privoxy configuration files have been installed in $(CONF_DEST)"
1240 # rmdir is used as a precaution since it will not remove non-empty
1241 # directories. RH init script creates lock file and pid file.
1242 uninstall: CONF_DEST LOG_DEST PID_DEST check_doc
1243 @$(ECHO) Starting Privoxy uninstallation
1244 @# KILL privoxy if running
1245 -@if [ -f /etc/redhat-release ] && [ -x /etc/rc.d/init.d/privoxy ]; then \
1246 /etc/rc.d/init.d/privoxy stop >/dev/null 2>/dev/null ;\
1247 chkconfig --del $(PROGRAM) 2>/dev/null;\
1249 -@test -f $(PID_DEST)/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
1250 $(KILL) `$(CAT) $(PID_DEST)/privoxy.pid` || :
1251 -@test -f /var/run/privoxy.pid && $(ECHO) Stopping $(PROGRAM) &&\
1252 $(KILL) `$(CAT) /var/run/privoxy.pid ` || :
1255 @$(ECHO) Removing $(PROGRAM) binary
1256 $(RM) $(SBIN_DEST)/$(PROGRAM) $(SBIN_DEST)/$(PROGRAM)~
1258 @# config files and dir, and maybe old install backups
1259 -@if [ -d $(CONF_DEST) ]; then \
1260 $(ECHO) Saving $(PROGRAM) config files to /tmp/$(PROGRAM)-save ;\
1261 $(MKDIR) /tmp/$(PROGRAM)-save ;\
1263 for i in $(CONFIGS); do \
1264 [ -f $$i ] && $(CP) $$i /tmp/$(PROGRAM)-save ;\
1267 @$(ECHO) Removing $(PROGRAM) config files
1268 -@for i in $(CONFIGS); do \
1269 test -f $(CONF_DEST)/$$i && $(ECHO) Removing $$i ;\
1270 $(RM) $(CONF_DEST)/$$i $(CONF_DEST)/$$i~ $(CONF_DEST)/$$i.new ;\
1272 -@test -d $(CONF_DEST)/templates && $(RM) -r $(CONF_DEST)/templates &&\
1273 $(ECHO) "Removing $(CONF_DEST)/templates/*"
1275 @# man page and docs
1276 @$(ECHO) Removing $(PROGRAM) docs
1277 -$(RM) $(MAN_DEST)/privoxy.1*
1278 -$(RM) -r $(DOC_DEST) || $(RM) -r $(prefix)/doc/privoxy
1280 @# Log and jarfile and pidfile
1281 @$(ECHO) Removing $(PROGRAM) logs
1282 -$(RM) $(LOG_DEST)/logfile $(PID_DEST)/privoxy.pid $(LOG_DEST)/jarfile
1284 @# Final clean up of unused directories. Special handling of CONF and LOG
1286 @$(ECHO) Removing $(PROGRAM) directories
1287 @for i in $(LOG_DEST) $(CONF_DEST); do \
1288 if test -d $$i; then \
1289 $(ECHO) Removing $$i ;\
1290 $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
1293 @if [ ! "$(prefix)" = "/usr/local" ] ;then \
1294 for i in $(MAN_DEST) $(MAN_DIR) $(SHARE_DEST)/doc $(SHARE_DEST) $(SBIN_DEST); do \
1295 if test -d $$i; then \
1296 $(ECHO) Removing $$i ;\
1297 $(RMDIR) $$i || $(ECHO) "$$i is not empty, not removed" ;\
1300 if test $(LOG_DEST) != /var/log/privoxy && test -d $(prefix)/var/log; then \
1301 $(ECHO) Removing $(prefix)/var/log ;\
1302 $(RMDIR) $(prefix)/var/log || $(ECHO) "$(prefix)/var/log is not empty, not removed";\
1304 if test $(PID_DEST) != /var/run && test -d $(prefix)/var/run; then \
1305 $(ECHO) Removing $(prefix)/var/run ;\
1306 $(RMDIR) $(prefix)/var/run || $(ECHO) "$(prefix)/var/run is not empty, not removed";\
1308 if test $(prefix)/var != /var && test -d $(prefix)/var; then \
1309 $(ECHO) Removing $(prefix)/var ;\
1310 $(RMDIR) $(prefix)/var || $(ECHO) "$(prefix)/var is not empty, not removed" ;\
1312 if test $(prefix) != / && test $(prefix) != /usr && test -d $(prefix); then \
1313 $(ECHO) Removing $(prefix) ;\
1314 $(ECHO) Removing installation directory $(prefix) ;\
1315 $(RMDIR) $(prefix) || $(ECHO) "$(prefix) is not empty, not removed" ;\
1319 @# init scripts and logrotate
1320 @if [ "$(prefix)" = "/usr/local" ] || [ "$(prefix)" = "/usr" ]; then \
1321 $(ECHO) Removing $(PROGRAM) init script ;\
1322 if [ -f /etc/slackware-version ] && [ -d /etc/rc.d/ ] && [ -w /etc/rc.d/ ] ; then \
1323 $(RM) /etc/rc.d/rc.privoxy ;\
1324 elif [ -f /etc/redhat-release ] && [ -d /etc/rc.d/init.d/ ] && [ -w /etc/rc.d/init.d/ ] ; then \
1325 $(RM) /etc/rc.d/init.d/privoxy /etc/logrotate.d/privoxy;\
1326 elif [ -d /etc/init.d ] && [ -w /etc/init.d ] ; then \
1327 $(RM) /etc/init.d/privoxy ;\
1329 $(ECHO) "Unable to remove privoxy init script, not installed or permission denied" ;\
1332 @$(ECHO) Privoxy uninstalled, bye
1335 @perl -e 'print pack "C*", (31,139,8,8,153,63,226,60,2,3,99,111,102,102,101,101,0,109,143,205,13,192,32,8,133,\
1336 239,78,241,110,234,1,28,160,171,152,208,53,26,117,247,22,165,73,137,125,9,1,62,126,2,128,169,5,243,143,\
1337 13,139,49,164,65,100,149,152,102,73,141,88,73,178,116,205,100,69,253,36,102,81,49,83,236,19,225,171,131,\
1338 214,172,163,73,4,168,123,115,71,126,247,122,94,128,178,227,95,154,12,86,215,122,197,249,146,187,54,220,125,\
1339 193,51,228,11,1,0,0);'|zcat
1341 #############################################################################
1347 # $Log: GNUmakefile.in,v $
1348 # Revision 1.141 2006/08/12 03:54:37 david__schmidt
1349 # Windows service integration
1351 # Revision 1.140 2006/07/18 14:48:45 david__schmidt
1352 # Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
1353 # with what was really the latest development (the v_3_0_branch branch)
1355 # Revision 1.104.2.28 2004/06/10 17:06:05 hal9
1356 # Fix bug #959617, by moving TMPDIR var to create-snapshot target, which is the
1357 # only place it is used.
1359 # Revision 1.104.2.27 2004/02/07 16:11:10 oes
1360 # Make clobber remove the autom4te.cache dir.
1363 # Revision 1.104.2.26 2004/01/31 16:32:25 oes
1364 # Adding a check for an htmldoc variant from the debian diff
1366 # Revision 1.104.2.25 2004/01/31 01:15:33 oes
1367 # Fixed a typo; updated copyright notice
1369 # Revision 1.104.2.24 2003/12/03 10:30:02 oes
1370 # - Added new dependency: actions.c -> ssplit.h
1371 # - Excluded PDF docs from src tarball
1373 # Revision 1.104.2.23 2003/04/20 17:28:52 hal9
1374 # Strip trailing spaces from config-file generation, bug #724596.
1376 # Revision 1.104.2.22 2003/03/28 03:32:01 hal9
1377 # Minor changes for Privoxy home page:
1378 # - Handle © more sanely
1379 # - include link to announce.txt
1380 # Also, disable 'make announce' target.
1382 # Revision 1.104.2.21 2002/11/04 07:04:03 hal9
1383 # Catch up with main trunk install/uninstall. Quiet output, etc.
1385 # Revision 1.104.2.20 2002/10/25 02:44:22 hal9
1386 # Port of make install, etc from main trunk. Needs testing! Add Slackware
1387 # support, and other related changes. Update related docs.
1389 # Revision 1.104.2.19 2002/09/26 22:50:02 hal9
1390 # New user-manual examples in config-file are getting wrapped. Add warning.
1392 # Revision 1.104.2.18 2002/08/23 12:22:40 oes
1393 # Added warning to broken install target
1395 # Revision 1.104.2.17 2002/08/16 03:19:34 hal9
1396 # More (minor) cleanup of html before pdf processing to make some relative
1397 # links work as pdf -> pdf. Upload pdf as zip archive now.
1399 # Revision 1.104.2.16 2002/08/14 16:43:27 hal9
1400 # Added pdf docs to make webserver target.
1402 # Revision 1.104.2.15 2002/08/11 20:02:41 hal9
1403 # New targets for man page (make man) and pdf (make dok-pdf) targets.
1405 # Revision 1.104.2.14 2002/08/10 11:19:37 oes
1406 # - Make -Ipcre (again) conditional on STATIC_PCRE
1407 # - $(RPMBUILD) -> $(RPM) for SuSE
1408 # - Add dependency: pcrs.o deps on config.h
1410 # Revision 1.104.2.13 2002/08/07 15:13:54 hal9
1411 # Remove pdf2 target, and make it dok-shtml (single page html for pdf
1414 # Revision 1.104.2.12 2002/08/06 11:29:36 oes
1415 # Fixed detection/inclusion of pcre.h, which is in a pcre subdir on RH
1417 # Revision 1.104.2.11 2002/07/30 19:38:11 hal9
1418 # Add redhat-test target for testing purposes only. Fix RPM_PACKAGEV to what
1419 # *I think* it was supposed to be (was breaking upload targets since it was
1420 # set to RPM_VERSION).
1422 # Revision 1.104.2.10 2002/07/27 22:56:53 kick_
1423 # cleanups of the redhat-srpm target
1425 # Revision 1.104.2.9 2002/07/26 15:17:02 oes
1426 # - Added generation of default.action from defaul.action.master
1427 # - Deleted obsolete re_filterfile.txt generation
1429 # Revision 1.104.2.8 2002/07/12 10:04:32 kick_
1430 # added helper targets to the makefile. They shouldn't break anything, but
1431 # make my life a lot easier.
1433 # The new rpm has been splitted into two parts, one for package installation/
1434 # removal, one for package building.
1435 # Therefore rpm -ta isn't a valid command anymore and needs to be replaced
1436 # by rpmbuild -ta (this is backwards compatible)
1438 # Revision 1.104.2.7 2002/06/07 00:23:47 hal9
1439 # Fixing a quirk of man2html (on my system) that pulls punctuation into URLs,
1440 # thus breaking them completely.
1442 # Revision 1.104.2.6 2002/06/02 03:26:25 hal9
1443 # Update CONFIG_FILES (ie update basic.action, etc), and also DOC_FILES (exclude
1444 # index.html and team/index.html)
1446 # Revision 1.104.2.5 2002/05/30 15:35:01 hal9
1447 # This is more cleanup on the make config-file target. Most issues for
1448 # automatic generation are taken care of. There are still some problems
1449 # that require hand editing. Namely, some of the examples that are > 80 chars.
1451 # Revision 1.104.2.4 2002/05/29 02:12:17 hal9
1452 # Ooops...forgot about perl -pi cygwin problem. Add -pi.bak. Also, the
1453 # new target is 'make config-file', _not_ make config.
1455 # Revision 1.104.2.3 2002/05/29 02:05:48 hal9
1456 # 'make config' target added (WIP) for future generation of config file from
1457 # text in u-m so the two are in sync. New generated config, which requires
1458 # some hand editing for the time being.
1460 # Revision 1.104.2.2 2002/05/28 02:32:55 hal9
1461 # New target 'make dok-index' for privoxy-index.html. Also, fixed *.bak files
1462 # not being cleaned up in doc/webserver.
1464 # Revision 1.104.2.1 2002/05/26 17:19:34 hal9
1465 # Remove Table of Contents from readme with oes's dsl trick.
1467 # Revision 1.104 2002/05/24 00:03:49 oes
1468 # Use p_doc.css for the Homepage for consistency
1470 # Revision 1.103 2002/05/23 23:19:00 oes
1471 # Use dsl without TOC for the homepage
1473 # Revision 1.102 2002/05/16 01:20:17 hal9
1474 # make announce target added.
1476 # Revision 1.101 2002/05/15 12:28:46 oes
1477 # Trying to keep Hal happy :)
1479 # Revision 1.100 2002/05/08 13:48:18 hal9
1480 # Ooops, that trashed JB v2.0.2 comment. Fixed.
1482 # Revision 1.99 2002/05/08 13:42:07 hal9
1483 # This fixes the numbering problem on index.html in contact info section (.1.). Using
1484 # perl, since its way too convoluted to try to fix proper with docbook.
1486 # Revision 1.98 2002/05/03 14:33:06 oes
1487 # Replaced ldp(OK).dsl handling with generation via autoconf; handle all file exeptions to src tarball via find
1489 # Revision 1.97 2002/04/27 20:27:43 swa
1490 # no longer needed due to new
1491 # PACKAGE_VERSION process
1493 # Revision 1.96 2002/04/27 17:44:32 morcego
1494 # - Correcting typo in my name (Rodrigo, not Rodgrigo) :-)
1495 # - Using the RM macro everywhere rm is called (either we use, or don't)
1498 # Revision 1.95 2002/04/27 15:37:25 swa
1499 # replacing directory in document creation process
1500 # no longer necessary.
1502 # Revision 1.94 2002/04/27 08:23:29 swa
1503 # pdf process reviewed and cleaned up
1505 # Revision 1.93 2002/04/27 04:55:53 morcego
1506 # privoxy-cl.spec now gets removed by clobber target
1508 # Revision 1.92 2002/04/27 04:53:40 morcego
1509 # Adding --exclude "PACKAGERS" to every tar command that applies (not for
1512 # Revision 1.91 2002/04/27 04:44:51 morcego
1513 # GNUmakefile.in: The tarball created on redhat-dist and suse-dist now ignore
1514 # the PACKAGERS file, as well privoxy-cl.spec (in case it was created)
1515 # GNUmakefile.in: New targets -> conectiva-spec, conectiva-dist and
1517 # genclspec.sh : New file to generate, from privoxy-rh.spec, a specfile
1518 # for Conectiva Linux
1520 # Revision 1.90 2002/04/26 17:46:53 swa
1523 # Revision 1.89 2002/04/26 17:20:54 swa
1524 # just produce single html files to proces them later with Destiller or somesuch. looks prettier.
1526 # Revision 1.88 2002/04/25 19:13:57 morcego
1527 # Removed RPM release number declaration on configure.in
1528 # Changed makefile to use given value for RPM_PACKAGEV when on uploading
1529 # targets (will produce an error, explaining who to do it, if no value
1532 # Revision 1.87 2002/04/23 14:10:59 swa
1533 # now create pdf documents
1535 # Revision 1.86 2002/04/15 04:30:27 hal9
1536 # Missed two -pi.bak's on perl/cygwin problem.
1538 # Revision 1.85 2002/04/14 01:05:34 hal9
1539 # Revert dok-webserver change for SF logo.
1541 # Revision 1.84 2002/04/13 22:43:25 hal9
1542 # -Fix dok-webserver for SF logo (more perl).
1543 # -Change all perl -pi to perl -pi.bak for Cygwin problem.
1545 # Revision 1.83 2002/04/12 09:39:25 oes
1546 # Excluding yet more files from tarball; making dist warning yet more scary
1548 # Revision 1.82 2002/04/11 21:07:11 oes
1549 # Excluding more files from tarball build
1551 # Revision 1.81 2002/04/11 14:40:27 oes
1552 # Fixed typo -- Thanks, Moritz!
1554 # Revision 1.80 2002/04/11 12:50:00 oes
1555 # Fixed tarball-dist target
1557 # Revision 1.79 2002/04/11 06:49:28 oes
1558 # webserver target: silenced timestamp warnings resulting from uploading westwards, made permissions fixing independant of screwed local dir permissions, suppress (false alarm) make error if not owner of feedback log
1560 # Revision 1.78 2002/04/09 13:37:11 sarantis
1561 # fix tar options typo
1563 # Revision 1.77 2002/04/09 13:28:53 swa
1564 # build suse and gen-dist with html docs
1566 # Revision 1.76 2002/04/08 22:43:41 oes
1567 # Fix: Include dotfiles in fixing webserver permissions
1569 # Revision 1.75 2002/04/08 22:14:59 oes
1570 # Silencing tar warnings in the web* targets
1572 # Revision 1.74 2002/04/08 15:22:44 hal9
1573 # This has finishing touches for dok building. Should be ready to go.
1574 # -The main doc build is now 'make dok', should work on Redhat too.
1575 # -Removed man page from main doc build. It is built separately due to
1576 # perl scripts that most aren't likely to have.
1578 # Revision 1.73 2002/04/08 14:03:24 oes
1579 # oes for al: Fix install target
1581 # Revision 1.72 2002/04/08 13:42:11 oes
1582 # Added safety check to *-dist targets; fixed permissions for feedback logfile
1584 # Revision 1.71 2002/04/07 20:32:03 hal9
1585 # -Add meta data kludge for make dok-webserver via $(PERL).
1586 # -Add subdirs for 'make dok-release'.
1588 # Revision 1.70 2002/04/07 08:59:40 swa
1589 # generated files. do NOT edit.
1590 # fixed directory bug in makefile.
1592 # Revision 1.69 2002/04/07 08:10:47 swa
1593 # create some of the webserver docs
1594 # automatically (in particular if
1595 # those docs recycle other documentation
1596 # fragments). Now committed webserver's
1599 # Revision 1.68 2002/04/07 07:58:11 swa
1600 # create some of the webserver docs
1601 # automatically (in particular if
1602 # those docs recycle other documentation
1605 # Revision 1.67 2002/04/07 05:31:42 hal9
1606 # Add 'dok-release' target:
1607 # -Set doc entities to VERSION and CODE_STATUS during make.
1608 # -Set doc conditional content flags (stable vs non-stable).
1609 # A separate target for the time being but needs to be incorporated into
1610 # dok build at some point.
1611 # -Filter out a spurious ^G from new man page > html converion in man2html.
1613 # Revision 1.66 2002/04/06 20:28:21 jongfoster
1614 # Prettifying groff2html.
1615 # Using GNU Make's conditional makefile feature rather than shell "if"s.
1616 # (The shell "if"s were hiding errors)
1617 # "perl" -> "$(PERL)"
1618 # Spaces->tabs in a couple of places.
1620 # Revision 1.65 2002/04/06 05:16:39 hal9
1621 # -Add 'authors' and 'man' targets for AUTHORS and man-page (WIP).
1622 # -Both of these will soon be generated files.
1624 # Revision 1.64 2002/04/04 22:14:51 oes
1625 # No longer rely on find honoring -iname
1627 # Revision 1.63 2002/04/04 21:06:22 swa
1630 # Revision 1.62 2002/04/04 20:49:50 swa
1631 # attempt to consolidate the
1632 # different dokbook versions.
1634 # Revision 1.61 2002/04/04 19:18:21 swa
1635 # readme was leftover directory. use w3m instead
1636 # of lynx to be consistent among developers. use
1637 # consistent target naming.
1639 # Revision 1.60 2002/04/04 12:25:41 oes
1640 # Tidy webserver upload w/o *~ files, CVS dirs and logfiles and with proper dir and file permissions
1642 # Revision 1.59 2002/04/04 08:32:45 swa
1643 # wrong name for tarball-dist target. further fixed content of tarball dist
1645 # Revision 1.58 2002/04/04 06:32:58 hal9
1646 # New dok targets for make readme.
1648 # Revision 1.57 2002/04/04 00:36:36 gliptak
1649 # always use pcre for matching
1651 # Revision 1.56 2002/04/03 22:28:03 gliptak
1652 # Removed references to gnu_regex
1654 # Revision 1.55 2002/04/03 19:54:29 swa
1655 # freebsd tested to work. attempt to move tarball dist target forward
1657 # Revision 1.54 2002/04/03 14:54:07 oes
1658 # Standard clean and clobber semantics II
1660 # Revision 1.53 2002/04/03 14:19:16 oes
1661 # Standard clean and clobber semantics
1663 # Revision 1.52 2002/04/03 02:56:18 hal9
1664 # Revert previous FAQ numbering kludge.
1666 # Revision 1.51 2002/04/02 13:03:56 oes
1667 # Added fix for webserver permissions
1669 # Revision 1.50 2002/04/02 03:46:24 hal9
1670 # Rewrite ldpOK.dsl so that sections are NOT numbered on FAQ, in an effort
1671 # to make the Table of Contents not so 'busy' looking. SuSE needs testing :)
1673 # Revision 1.49 2002/03/30 22:20:12 swa
1674 # cd didn't work. neither did find.
1676 # Revision 1.48 2002/03/30 19:04:06 swa
1677 # people release differently. no good.
1678 # I want to make parts of the docs only.
1680 # Revision 1.47 2002/03/30 09:05:21 swa
1681 # better packaging. better rpm building.
1682 # tar failed on sun (no exclude there).
1684 # Revision 1.46 2002/03/29 20:09:01 swa
1687 # Revision 1.45 2002/03/29 19:45:45 swa
1690 # Revision 1.44 2002/03/29 17:42:44 gliptak
1691 # Correcting for Solaris tar limitations
1693 # Revision 1.43 2002/03/29 07:40:03 swa
1694 # fixed make webserver. doh
1696 # Revision 1.42 2002/03/29 06:59:04 swa
1697 # other users could not modify files on webserver
1699 # Revision 1.41 2002/03/28 20:43:00 swa
1700 # set make correctly
1702 # Revision 1.40 2002/03/28 04:22:44 hal9
1703 # More on man2html stuff.
1705 # Revision 1.39 2002/03/28 01:04:14 hal9
1706 # More man2html stuff for docs.
1708 # Revision 1.38 2002/03/27 16:02:30 swa
1709 # have a generic target
1711 # Revision 1.37 2002/03/27 15:30:26 swa
1712 # have a consistent appearance
1714 # Revision 1.36 2002/03/27 14:58:08 swa
1715 # can be used by mutilple targets
1717 # Revision 1.35 2002/03/27 14:53:19 swa
1718 # added solaris-dist
1720 # Revision 1.34 2002/03/27 10:30:11 swa
1721 # we want a html man file on the webserver
1723 # Revision 1.33 2002/03/27 03:05:35 hal9
1724 # Added man2html target for docs (redhat-dok only for now)
1726 # Revision 1.32 2002/03/26 22:29:54 swa
1727 # we have a new homepage!
1729 # Revision 1.31 2002/03/26 14:00:18 swa
1730 # fixed make tarball, tarball-dist, tarball-clean
1732 # Revision 1.30 2002/03/25 12:52:25 swa
1735 # Revision 1.29 2002/03/24 17:03:55 jongfoster
1738 # Revision 1.28 2002/03/24 16:19:48 swa
1739 # configure needs to be generated.
1741 # Revision 1.27 2002/03/24 16:13:57 swa
1742 # generated files are a nono in cvs
1744 # Revision 1.26 2002/03/24 15:36:02 swa
1747 # Revision 1.25 2002/03/24 14:31:08 swa
1748 # remove more crappy files. set RPM
1749 # release version correctly.
1751 # Revision 1.24 2002/03/24 14:19:55 swa
1752 # set rpm package release in configure.in. nowhere else.
1754 # Revision 1.23 2002/03/24 13:06:49 swa
1755 # suse-clean now runs fine
1757 # Revision 1.22 2002/03/24 12:56:21 swa
1758 # name change related issues.
1760 # Revision 1.21 2002/03/24 12:43:57 swa
1763 # Revision 1.20 2002/03/24 11:39:17 jongfoster
1764 # Renaming config files
1766 # Revision 1.19 2002/03/22 20:53:03 morcego
1767 # - Ongoing process to change name to JunkbusterNG
1768 # - configure/configure.in: no change needed
1770 # - TAR_ARCH = /tmp/JunkbusterNG-$(RPM_VERSION).tar.gz
1771 # - PROGRAM = jbng@EXEEXT@
1772 # - rh-spec now references as junkbusterng-rh.spec
1773 # - redhat-upload: references changed to junkbusterng-* (package names)
1774 # - tarball-dist: references changed to JunkbusterNG-distribution-*
1775 # - tarball-src: now JunkbusterNG-*
1776 # - install: initscript now junkbusterng.init and junkbusterng (when
1778 # - junkbuster-rh.spec: renamed to junkbusterng-rh.spec
1779 # - junkbusterng.spec:
1780 # - References to the expression ijb where changed where possible
1781 # - New package name: junkbusterng (all in lower case, acording to
1782 # the LSB recomendation)
1783 # - Version changed to: 2.9.13
1785 # - Added: junkbuster to obsoletes and conflicts (Not sure this is
1786 # right. If it obsoletes, why conflict ? Have to check it later)
1787 # - Summary changed: Stefan, please check and aprove it
1788 # - Changes description to use the new name
1789 # - Sed string was NOT changed. Have to wait to the manpage to
1791 # - Keeping the user junkbuster for now. It will require some aditional
1792 # changes on the script (scheduled for the next specfile release)
1793 # - Added post entry to move the old logfile to the new log directory
1794 # - Removing "chkconfig --add" entry (not good to have it automaticaly
1795 # added to the startup list).
1796 # - Added preun section to stop the service with the old name, as well
1797 # as remove it from the startup list
1798 # - Removed the chkconfig --del entry from the conditional block on
1799 # the preun scriptlet (now handled on the %files section)
1800 # - junkbuster.init: renamed to junkbusterng.init
1801 # - junkbusterng.init:
1802 # - Changed JB_BIN to jbng
1803 # - Created JB_OBIN with the old value of JB_BIN (junkbuster), to
1804 # be used where necessary (config dir)
1807 # - The config directory is /etc/junkbuster yet. Have to change it on the
1808 # specfile, after it is changes on the code
1809 # - The only files that got renamed on the cvs tree were the rh specfile and
1810 # the init file. Some file references got changes on the makefile and on the
1811 # rh-spec (as listed above)
1813 # Revision 1.18 2002/03/21 23:00:00 swa
1814 # want to autogenerate stuff.
1816 # Revision 1.17 2002/03/19 19:30:04 morcego
1817 # - Fixing stylesheet checking on configure. If it is found, no further checks
1820 # - configure will now check for db2html or docbook2html (should work now
1821 # on SuSe without the docbktls package)
1823 # Revision 1.16 2002/03/14 22:32:32 hal9
1824 # Bumped the RPM version.
1826 # Revision 1.15 2002/03/08 20:00:28 swa
1829 # Revision 1.14 2002/03/07 18:25:56 swa
1830 # synced redhat and suse build process
1832 # Revision 1.13 2002/03/07 17:17:56 oes
1833 # (Hopefully) fixed for older make versions
1835 # Revision 1.12 2002/03/07 15:28:27 swa
1838 # Revision 1.11 2002/03/06 14:33:18 sarantis
1839 # Use proper temp file, not "abc".
1841 # Revision 1.10 2002/03/06 14:19:35 sarantis
1842 # Cleanup PID_FILE_PATH from redhat-dist target
1844 # Revision 1.9 2002/03/05 17:31:11 morcego
1845 # Search for docbook.dsl. Should solve portability problems for SuSe.
1847 # Revision 1.8 2002/03/05 14:07:42 morcego
1848 # configure now detects rpm topdir, and change GNUmakefile acordingly
1849 # (based on sugestion by Sarantis Paskalis)
1851 # Revision 1.7 2002/03/05 13:43:28 morcego
1852 # Checking for text browser, so redhat-dok can work.
1854 # Revision 1.6 2002/03/05 13:10:51 morcego
1855 # Changes to implement redhat-dok (Hal Burgiss)
1856 # Changes to make it work on other distros and out-of-the-shelf configurations
1858 # Revision 1.5 2002/02/27 15:30:39 hal9
1859 # Reset $(RPM_PACKAGEV) to 1 (was 2)
1861 # Revision 1.4 2002/01/17 21:44:04 jongfoster
1862 # Adding urlmatch.[ch]
1864 # Revision 1.3 2002/01/04 15:26:08 oes
1865 # Added tarball-src target
1867 # Revision 1.2 2001/12/30 14:07:31 steudten
1868 # - Add signal handling (unix)
1869 # - Add SIGHUP handler (unix)
1870 # - Add creation of pidfile (unix)
1871 # - Add action 'top' in rc file (RH)
1872 # - Add entry 'SIGNALS' to manpage
1873 # - Add exit message to logfile (unix)
1875 # Revision 1.1 2001/12/01 11:22:57 jongfoster
1876 # Renaming Makefile.in to GNUmakefile.in so that non-GNU versions of
1877 # make break in a more obvious way.
1878 # Adding .PHONY section.
1880 # Revision 1.40 2001/12/01 00:24:11 jongfoster
1881 # Renaming various config files
1882 # Fixing CR->CRLF under Win32 (I hope)
1884 # Revision 1.39 2001/11/06 12:07:30 steudten
1885 # Add --clean for building rpm in target redhat-dist.
1887 # Revision 1.38 2001/11/05 21:35:23 steudten
1888 # Complete rewrite for the 'redhat-dist' target.
1889 # Checks for writeable RPM build directories for calling user.
1890 # So you must not be root, just set the modes to 1777 to
1891 # build a RH package.
1892 # Fix the upload-target to be arch independant.
1893 # Add target for 'solaris-dist' - coming soon.
1895 # Revision 1.37 2001/11/01 00:52:04 hal9
1896 # Redhat-upload stuff per Stefan.
1898 # Revision 1.36 2001/10/31 19:26:13 swa
1899 # automate process of uploading new releases
1902 # Revision 1.35 2001/10/15 22:14:59 joergs
1903 # Removed -O2 and -Wall from AmigaOS-only CFLAGS since they are now in
1904 # the general CFLAGS already.
1906 # Revision 1.34 2001/10/15 18:28:06 steudten
1907 # remove config.cache for target clobber.
1908 # Cleanup make dist for RH and S.u.S.E.
1910 # Revision 1.33 2001/10/10 12:43:33 oes
1911 # Added ugly hack to make install target work at least for some setups.
1913 # Revision 1.32 2001/10/09 22:38:19 jongfoster
1914 # Correcting actionsfile filename for Win32 INI build
1916 # Revision 1.31 2001/09/23 10:13:48 swa
1917 # upload process established. run make webserver and
1918 # the documentation is moved to the webserver. documents
1919 # are now linked correctly.
1921 # Revision 1.30 2001/09/19 17:55:49 oes
1924 # Revision 1.29 2001/09/16 17:34:27 jongfoster
1925 # Removing showargs.[ch], adding cgi(simple|edit).[ch]
1926 # Replacing $(OBJEXT) with @OBJEXT@ - this seems to be a common source
1927 # of build problems.
1929 # Revision 1.28 2001/09/13 15:19:08 swa
1930 # we want text files as well.
1932 # Revision 1.27 2001/09/13 13:11:37 steudten
1934 # Replace DEBUG_CFLAGS with OTHER_CFLAGS
1936 # Revision 1.26 2001/09/12 23:44:54 david__schmidt
1937 # Mac OSX (Darwin) support added.
1939 # Revision 1.25 2001/09/12 22:55:45 joergs
1940 # AmigaOS support added.
1942 # Revision 1.24 2001/09/12 17:28:59 david__schmidt
1944 # OS/2 port: update autoconf'd support for the platform.
1946 # Revision 1.23 2001/09/12 16:28:42 swa
1947 # added "make dok" section to generate html pages from
1948 # the sgml source documents. note that the we do not want
1949 # generated stuff in cvs.
1951 # Revision 1.22 2001/09/10 16:31:23 swa
1952 # buildroot definition in the specfile fucks up the build
1953 # process under suse. hence I moved it to the "rpm -ta"
1956 # Revision 1.21 2001/09/10 11:12:49 oes
1959 # Revision 1.20 2001/08/02 22:04:29 jongfoster
1960 # Removing some remaining references to obsolete w32rulesdlg.[ch]
1962 # Revision 1.19 2001/07/30 22:14:03 jongfoster
1963 # Removing obsolete w32rulesdlg.c and w32rulesdlg.h
1965 # Revision 1.18 2001/07/29 17:09:17 jongfoster
1966 # Major changes to build system in order to fix these bugs:
1967 # - pthreads under Linux was broken - changed -lpthread to -pthread
1968 # - Compiling in MinGW32 mode under CygWin now correctly detects
1969 # which shared libraries are available
1970 # - Solaris support (?) (Not tested under Solaris yet)
1972 # Revision 1.17 2001/07/28 16:44:54 oes
1973 # Fixed sed LF->CRLF conversion and removed deprecated files
1975 # Revision 1.16 2001/07/15 19:45:33 jongfoster
1976 # Added support for linking with POSIX threads library
1978 # Revision 1.15 2001/07/13 13:48:07 oes
1979 # - Moved STATIC #define for pcre to (ac)config.h
1980 # - Made -Ipcre depandant on static pcre compilation to
1981 # avoid version conflicts
1982 # - Included compilation and depandancies for new deanimate.c
1983 # - Made changes to the pcre/pcreposix/pcrs build process
1984 # as required by the new library autodetection in
1987 # Revision 1.14 2001/07/01 16:27:44 oes
1988 # Fixed misplaced dependancy
1990 # Revision 1.13 2001/06/29 13:18:36 oes
1991 # - added depandancy of filters.o on cgi.h
1993 # Revision 1.12 2001/06/12 17:15:56 swa
1994 # fixes, because a clean build on rh6.1 was impossible.
1995 # GZIP confuses make, %configure confuses rpm, etc.
1997 # Revision 1.11 2001/06/11 11:26:35 sarantis
1998 # RPM version should be the same as ijbswa version. The rpm release is
1999 # specified in the specfile.
2001 # Revision 1.10 2001/06/07 17:27:45 swa
2002 # added suse build section
2004 # Revision 1.9 2001/06/04 18:31:58 swa
2005 # files are now prefixed with either `confdir' or `logdir'.
2006 # `make redhat-dist' replaces both entries confdir and logdir
2007 # with redhat values
2009 # Revision 1.8 2001/06/04 10:44:57 swa
2010 # `make redhatr-dist' now works. Except for the paths
2011 # in the config file.
2013 # Revision 1.7 2001/06/03 17:09:09 swa
2014 # swa for oes: reversed my earlier change
2016 # Revision 1.6 2001/06/03 17:07:27 swa
2019 # Revision 1.5 2001/06/03 13:57:26 swa
2020 # compile cgi.c (for andreas' GUI)
2022 # Revision 1.4 2001/05/31 21:18:45 jongfoster
2023 # Added files actions.[ch], actionlist.h, list.[ch] to Makefile
2025 # Revision 1.3 2001/05/29 20:02:48 joergs
2026 # Changes for AmigaOS added.
2028 # Revision 1.2 2001/05/17 22:23:23 oes
2029 # - Added auto-generation of CRLFs for Win32 config files
2030 # - Added comment-prefix to all Win32-only options in the config file
2031 # and provided auto stripping of this prefix for the Win32 platform by make
2033 # Revision 1.1.1.1 2001/05/15 13:59:00 oes
2034 # Initial import of version 2.9.3 source tree
projects / privoxy.git / blob