-# Sample Configuration file for Privoxy
-#
-# $Id: config,v 1.38 2002/05/03 03:59:25 hal9 Exp $
-#
-###################################################################
-# #
-# Table of Contents #
-# #
-# I. INTRODUCTION #
-# II. FORMAT OF THE CONFIGURATION FILE #
-# #
-# 1. CONFIGURATION AND LOG FILE LOCATIONS #
-# 2. LOCAL SET-UP DOCUMENTATION #
-# 3. DEBUGGING #
-# 4. ACCESS CONTROL AND SECURITY #
-# 5. FORWARDING #
-# 6. WINDOWS GUI OPTIONS #
-# #
-###################################################################
-
-# I. INTRODUCTION
+# Sample Configuration file for Privoxy v2.9.15
+#
+# Copyright (C) 2001, 2002 Privoxy Developers http://privoxy.org
+#
+# $Id: config,v 1.39 2002/05/12 03:21:21 hal9 Exp $
+#
+##################################################################
+# #
+# Table of Contents #
+# #
+# I. INTRODUCTION #
+# II. FORMAT OF THE CONFIGURATION FILE #
+# #
+# 1. CONFIGURATION AND LOG FILE LOCATIONS #
+# 2. LOCAL SET-UP DOCUMENTATION #
+# 3. DEBUGGING #
+# 4. ACCESS CONTROL AND SECURITY #
+# 5. FORWARDING #
+# 6. WINDOWS GUI OPTIONS #
+# #
+##################################################################
+
+#
+# I. INTRODUCTION
# ===============
-#
-# This file holds the Privoxy configuration. If you modify this
-# file, you will need to send a couple of requests to the proxy
-# before any changes take effect.
-#
-# When starting Privoxy on Unix systems, give the name of this
-# file as an argument. On Windows systems, Privoxy will look for
-# this file with the name 'config.txt' in the same directory where
-# Privoxy is installed.
-#
+#
+# This file holds the Privoxy configuration. If you modify this file,
+# you will need to send a couple of requests to the proxy before any
+# changes take effect.
+#
+# When starting Privoxy on Unix systems, give the name of this file as
+# an argument. On Windows systems, Privoxy will look for this file
+# with the name 'config.txt' in the same directory where Privoxy
+# is installed.
+#
# II. FORMAT OF THE CONFIGURATION FILE
# ====================================
-#
-# Configuration lines consist of an initial keyword followed by a list
-# of values, all separated by whitespace (any number of spaces or
-# tabs). For example,
-#
+#
+# Configuration lines consist of an initial keyword followed by a
+# list of values, all separated by whitespace (any number of spaces
+# or tabs). For example,
+#
# actionsfile default.action
-#
+#
# Indicates that the actionsfile is named 'default.action'.
-#
-# The '#' indicates a comment. Any part of a line following a '#' is
-# ignored, except if the '#' is preceded by a '\'.
-#
+#
+# The '#' indicates a comment. Any part of a line following a '#'
+# is ignored, except if the '#' is preceded by a '\'.
+#
# Thus, by placing a # at the start of an existing configuration line,
-# you can make it a comment and it will be treated as if it weren't there.
-# This is called "commenting out" an option and can be useful.
-#
+# you can make it a comment and it will be treated as if it weren't
+# there. This is called "commenting out" an option and can be useful.
+#
# Note that commenting out and option and leaving it at its default
# are two completely different things! Most options behave very
-# differently when unset. See the the "Effect if unset" explanation
+# differently when unset. See the the "Effect if unset" explanation
# in each option's description for details.
-#
-# Long lines can be continued on the next line by using a `\' as
-# the last character.
-#
+#
+# Long lines can be continued on the next line by using a `\' as the
+# last character.
-# 1. CONFIGURATION AND LOG FILE LOCATIONS
-# =======================================
-#
+
+# 1. CONFIGURATION AND LOG FILE LOCATIONS
+# =======================================
+#
# Privoxy can (and normally does) use a number of other files for
-# additional configuration and logging. This section of the
+# additional configuration, help and logging. This section of the
# configuration file tells Privoxy where to find those other files.
-#
-# The user running Privoxy, must have read permission for all
-# configuration files, and write permission to any files that would
+#
+# The user running Privoxy, must have read permission for all
+# configuration files, and write permission to any files that would
# be modified, such as log files.
+#
-# 1.1. user-manual
-# ================
-#
-# Specifies:
-#
-# Location of the Privoxy User Manual.
-#
-# Type of value:
-#
-# A fully qualified URI
-#
-# Default value:
-#
-# http://www.privoxy.org/user-manual/
-#
-# Effect if unset:
-#
-# The default will be used.
-#
-# Notes:
-#
-# The User Manual is used for help hints from some of the internal
-# CGI pages. It is normally packaged with the binary distributions,
-# and would make more sense to have this pointed at a locally
-# installed copy.
-#
-# A more useful example (Unix):
-#
-# user-manual file:///usr/share/doc/privoxy-2.9.14/user-manual/
-#
-# +-----------------------------------------------------------------+
-# | Warning |
-# |-----------------------------------------------------------------|
-# |If this option is defined, it must come first! It is needed |
-# |before the rest of config is read. |
-# +-----------------------------------------------------------------+
-#
-#
-#user-manual http://www.privoxy.org/user-manual/
-
-# 1.2. confdir
+# 1.1. confdir
# ============
-#
+#
# Specifies:
-#
+#
# The directory where the other configuration files are located
-#
+#
# Type of value:
-#
+#
# Path name
-#
+#
# Default value:
-#
+#
# /etc/privoxy (Unix) or Privoxy installation dir (Windows)
-#
+#
# Effect if unset:
-#
+#
# Mandatory
-#
+#
# Notes:
-#
+#
# No trailing "/", please
-#
+#
# When development goes modular and multi-user, the blocker,
# filter, and per-user config will be stored in subdirectories of
# "confdir". For now, the configuration directory structure is
-# flat, except for confdir/templates, where the HTML templates for
-# CGI output reside (e.g. Privoxy's 404 error page).
+# flat, except for confdir/templates, where the HTML templates
+# for CGI output reside (e.g. Privoxy's 404 error page).
#
confdir .
-
-# 1.3. logdir
+# 1.2. logdir
# ===========
#
# Specifies:
-#
+#
# The directory where all logging takes place (i.e. where logfile
# and jarfile are located)
-#
+#
# Type of value:
-#
+#
# Path name
-#
+#
# Default value:
-#
+#
# /var/log/privoxy (Unix) or Privoxy installation dir (Windows)
-#
+#
# Effect if unset:
-#
+#
# Mandatory
-#
+#
# Notes:
-#
+#
# No trailing "/", please
-#
+#
logdir .
-
-# 1.4. actionsfile
-# ================
+# 1.3. actionsfile
+# ================
#
# Specifies:
-#
-# The actions file to use
-#
+#
+# The actions file(s) to use
+#
# Type of value:
-#
-# File name, relative to confdir, without the .action (Unix)
-# or .action.txt (Windows) extension.
-#
+#
+# File name, relative to confdir, without the .action suffix
+#
# Default values:
-# standard # Internal purpose, recommended
-# default # Main actions file
-# user # User customizations
-#
+#
+# standard # Internal purposes, no editing recommended
+# default # Main actions file
+# user # User customizations
+#
# Effect if unset:
-#
-# No action is taken at all. Simple neutral proxying.
-#
+#
+# No actions are taken at all. Simple neutral proxying.
+#
# Notes:
-# Multiple actionsfile lines are OK and are in fact recommended!
-#
-# The default values include standard.action, which is used for
-# internal purposes and should be loaded, default.action, which
-# is the "main" actions file maintained by the developers, and
-# user.action, where you can make your personal additions.
-#
-# There is no point in using Privoxy without an actions file.
-#
+#
+# Multiple actionsfile lines are permitted, and are in fact
+# recommended!
+#
+# The default values include standard.action, which is used
+# for internal purposes and should be loaded, default.action,
+# which is the "main" actions file maintained by the developers,
+# and user.action, where you can make your personal additions.
+#
+# Actions files are where all the per site and per URL
+# configuration is done for ad blocking, cookie management,
+# privacy considerations, etc. There is no point in using Privoxy
+# without at least one actions file.
+#
actionsfile standard # Internal purpose, recommended
actionsfile default # Main actions file
actionsfile user # User customizations
-
-# 1.5. filterfile
+# 1.4. filterfile
# ===============
#
# Specifies:
-#
+#
# The filter file to use
-#
+#
# Type of value:
-#
+#
# File name, relative to confdir
-#
+#
# Default value:
-#
+#
# default.filter (Unix) or default.filter.txt (Windows)
-#
+#
# Effect if unset:
-#
+#
# No textual content filtering takes place, i.e. all +filter{name}
-# actions in the actions file are turned off
-#
+# actions in the actions files are turned neutral.
+#
# Notes:
-#
-# The "default.filter" file contains content modification rules
-# that use "regular expressions". These rules permit powerful
-# changes on the content of Web pages, e.g., you could disable your
-# favorite JavaScript annoyances, re-write the actual displayed
-# text, or just have some fun replacing "Microsoft" with
-# "MicroSuck" wherever it appears on a Web page.
-#
+#
+# The filter file contains content modification rules that use
+# regular expressions. These rules permit powerful changes on the
+# content of Web pages, e.g., you could disable your favorite
+# JavaScript annoyances, re-write the actual displayed text,
+# or just have some fun replacing "Microsoft" with "MicroSuck"
+# wherever it appears on a Web page.
+#
+# The +filter{name} actions rely on the relevant filter (name)
+# to be defined in the filter file!
+#
+# A pre-defined filter file called default.filter that contains
+# a bunch of handy filters for common problems is included in the
+# distribution. See the section on the filter action for a list.
+#
filterfile default.filter
-
-# 1.6. logfile
+# 1.5. logfile
# ============
#
# Specifies:
-#
+#
# The log file to use
-#
+#
# Type of value:
-#
+#
# File name, relative to logdir
-#
+#
# Default value:
-#
+#
# logfile (Unix) or privoxy.log (Windows)
-#
+#
# Effect if unset:
-#
-# No log file is used, all log messages go to the console
-# (stderr).
-#
+#
+# No log file is used, all log messages go to the console (STDERR).
+#
# Notes:
-#
+#
# The windows version will additionally log to the console.
-#
-# The logfile is where all logging and error messages are written.
-# The level of detail and number of messages are set with the debug
-# option (see below). The logfile can be useful for tracking down a
-# problem with Privoxy (e.g., it's not blocking an ad you think it
-# should block) but in most cases you probably will never look at
-# it.
-#
-# Your logfile will grow indefinitely, and you will probably want
-# to periodically remove it. On Unix systems, you can do this with
-# a cron job (see "man cron"). For Red Hat, a logrotate script has
-# been included.
-#
+#
+# The logfile is where all logging and error messages are
+# written. The level of detail and number of messages are set with
+# the debug option (see below). The logfile can be useful for
+# tracking down a problem with Privoxy (e.g., it's not blocking
+# an ad you think it should block) but in most cases you probably
+# will never look at it.
+#
+# Your logfile will grow indefinitely, and you will probably
+# want to periodically remove it. On Unix systems, you can do
+# this with a cron job (see "man cron"). For Red Hat, a logrotate
+# script has been included.
+#
# On SuSE Linux systems, you can place a line like
# "/var/log/privoxy.* +1024k 644 nobody.nogroup" in /etc/logfiles,
-# with the effect that cron.daily will automatically archive, gzip,
-# and empty the log, when it exceeds 1M size.
-#
-# Any log files must be writable by whatever user Privoxy is being
-# run as (default on UNIX, user id is "privoxy").
-#
+# with the effect that cron.daily will automatically archive,
+# gzip, and empty the log, when it exceeds 1M size.
+#
+# Any log files must be writable by whatever user Privoxy is
+# being run as (default on UNIX, user id is "privoxy").
+#
logfile logfile
-
-# 1.7. jarfile
+# 1.6. jarfile
# ============
#
# Specifies:
-#
+#
# The file to store intercepted cookies in
-#
+#
# Type of value:
-#
+#
# File name, relative to logdir
-#
+#
# Default value:
-#
+#
# jarfile (Unix) or privoxy.jar (Windows)
-#
+#
# Effect if unset:
-#
+#
# Intercepted cookies are not stored at all.
-#
+#
# Notes:
-#
+#
# The jarfile may grow to ridiculous sizes over time.
-#
+#
jarfile jarfile
-
-# 1.8. trustfile
+# 1.7. trustfile
# ==============
#
# Specifies:
-#
+#
# The trust file to use
-#
+#
# Type of value:
-#
+#
# File name, relative to confdir
-#
+#
# Default value:
-#
+#
# Unset (commented out). When activated: trust (Unix) or trust.txt
# (Windows)
-#
+#
# Effect if unset:
-#
+#
# The whole trust mechanism is turned off.
-#
+#
# Notes:
-#
+#
# The trust mechanism is an experimental feature for building
# white-lists and should be used with care. It is NOT recommended
# for the casual user.
-#
+#
# If you specify a trust file, Privoxy will only allow access to
-# sites that are named in the trustfile. You can also mark sites as
-# trusted referrers (with +), with the effect that access to
-# untrusted sites will be granted, if a link from a trusted
+# sites that are named in the trustfile. You can also mark sites
+# as trusted referrers (with +), with the effect that access
+# to untrusted sites will be granted, if a link from a trusted
# referrer was used. The link target will then be added to the
# "trustfile". Possible applications include limiting Internet
# access for children.
-#
+#
# If you use + operator in the trust file, it may grow considerably
# over time.
#
-#trustfile trust
+#trusfile trust
# 2. LOCAL SET-UP DOCUMENTATION
# =============================
#
-# If you intend to operate Privoxy for more users that just yourself,
-# it might be a good idea to let them know how to reach you, what you
-# block and why you do that, your policies etc.
+# If you intend to operate Privoxy for more users than just yourself,
+# it might be a good idea to let them know how to reach you, what
+# you block and why you do that, your policies, etc.
+
+# 2.1. user-manual
+# ================
+#
+# Specifies:
+#
+# Location of the Privoxy User Manual.
+#
+# Type of value:
+#
+# A fully qualified URI
+#
+# Default value:
+#
+# Unset
+#
+# Effect if unset:
+#
+# http://www.privoxy.org/version/user-manual/ will be used,
+# where version is the Privoxy version.
+#
+# Notes:
+#
+# The User Manual URI is used for help links from some of the
+# internal CGI pages. The manual itself is normally packaged
+# with the binary distributions, so you probably want to set this
+# to a locally installed copy. For multi-user setups, you could
+# provide a copy on a local webserver for all your users and use
+# the corresponding URL here.
+#
+# Examples:
+#
+# Unix, in local filesystem:
+#
+# user-manual file:///usr/share/doc/privoxy-2.9.15/user-manual/
+#
+# Any platform, on local webserver (called "local-webserver"):
+#
+# user-manual http://local-webserver/privoxy-user-manual/
+#
+# +-----------------------------------------------------------------+
+# | Warning |
+# |-----------------------------------------------------------------|
+# |If this option is defined, it must come first! It is needed |
+# |before the rest of config is read. |
+# +-----------------------------------------------------------------+
#
-#
-# 2.1. trust-info-url
+#user-manual http://www.privoxy.org/user-manual/
+
+# 2.2. trust-info-url
# ===================
#
# Specifies:
-#
+#
# A URL to be displayed in the error page that users will see if
# access to an untrusted page is denied.
-#
+#
# Type of value:
-#
+#
# URL
-#
+#
# Default value:
-#
+#
# Two example URL are provided
-#
+#
# Effect if unset:
-#
+#
# No links are displayed on the "untrusted" error page.
-#
+#
# Notes:
-#
+#
# The value of this option only matters if the experimental trust
# mechanism has been activated. (See trustfile above.)
-#
-# If you use the trust mechanism, it is a good idea to write up
-# some on-line documentation about your trust policy and to specify
-# the URL(s) here. Use multiple times for multiple URLs.
-#
+#
+# If you use the trust mechanism, it is a good idea to write
+# up some on-line documentation about your trust policy and to
+# specify the URL(s) here. Use multiple times for multiple URLs.
+#
# The URL(s) should be added to the trustfile as well, so users
# don't end up locked out from the information on why they were
# locked out in the first place!
-#
-trust-info-url http://www.example.com/why_we_block.html
-trust-info-url http://www.example.com/what_we_allow.html
-
+#
+trust-info-url http://www.example.com/why_we_block.html
+trust-info-url http://www.example.com/what_we_allow.html
-# 2.2. admin-address
+# 2.3. admin-address
# ==================
#
# Specifies:
-#
+#
# An email address to reach the proxy administrator.
-#
+#
# Type of value:
-#
+#
# Email address
-#
+#
# Default value:
-#
+#
# Unset
-#
+#
# Effect if unset:
-#
+#
# No email address is displayed on error pages and the CGI user
# interface.
-#
+#
# Notes:
-#
-# Highly recommended for multi-user installations.
-#
+#
# If both admin-address and proxy-info-url are unset, the whole
-# "Local Privoxy Support" box on all generated pages will not be
-# shown.
-#
+# "Local Privoxy Support" box on all generated pages will not
+# be shown.
+#
#admin-address privoxy-admin@example.com
-
-# 2.3. proxy-info-url
+# 2.4. proxy-info-url
# ===================
#
# Specifies:
-#
+#
# A URL to documentation about the local Privoxy setup,
# configuration or policies.
-#
+#
# Type of value:
-#
+#
# URL
-#
+#
# Default value:
-#
+#
# Unset
-#
+#
# Effect if unset:
-#
+#
# No link to local documentation is displayed on error pages and
# the CGI user interface.
-#
+#
# Notes:
-#
+#
# If both admin-address and proxy-info-url are unset, the whole
-# "Local Privoxy Support" box on all generated pages will not be
-# shown.
-#
+# "Local Privoxy Support" box on all generated pages will not
+# be shown.
+#
# This URL shouldn't be blocked ;-)
#
#proxy-info-url http://www.example.com/proxy-service.html
# 3. DEBUGGING
# ============
#
-# These options are mainly useful when tracing a problem. Note that you
-# might also want to invoke Privoxy with the --no-daemon command line
-# option when debugging.
-#
-#
+# These options are mainly useful when tracing a problem. Note that
+# you might also want to invoke Privoxy with the --no-daemon command
+# line option when debugging.
+
# 3.1. debug
# ==========
#
# Specifies:
-#
-# Key values that determine what information gets logged.
-#
+#
+# Key values that determine what information gets logged to
+# the logfile.
+#
# Type of value:
-#
+#
# Integer values
-#
+#
# Default value:
-#
-# 12289 (i.e.: URLs plus warnings and errors)
-#
+#
+# 12289 (i.e.: URLs plus informational and warning messages)
+#
# Effect if unset:
-#
+#
# Nothing gets logged.
-#
+#
# Notes:
-#
+#
# The available debug levels are:
-#
-# debug 1 # show each GET/POST/CONNECT request
-# debug 2 # show each connection status
-# debug 4 # show I/O status
-# debug 8 # show header parsing
-# debug 16 # log all data into the logfile
-# debug 32 # debug force feature
-# debug 64 # debug regular expression filter
-# debug 128 # debug fast redirects
-# debug 256 # debug GIF de-animation
-# debug 512 # Common Log Format
-# debug 1024 # debug kill pop-ups
-# debug 4096 # Startup banner and warnings
-# debug 8192 # Non-fatal errors
-#
-#
-# To select multiple debug levels, you can either add them or use
-# multiple debug lines.
-#
+#
+# debug 1 # show each GET/POST/CONNECT request
+# debug 2 # show each connection status
+# debug 4 # show I/O status
+# debug 8 # show header parsing
+# debug 16 # log all data into the logfile
+# debug 32 # debug force feature
+# debug 64 # debug regular expression filter
+# debug 128 # debug fast redirects
+# debug 256 # debug GIF de-animation
+# debug 512 # Common Log Format
+# debug 1024 # debug kill pop-ups
+# debug 4096 # Startup banner and warnings.
+# debug 8192 # Non-fatal errors
+#
+# To select multiple debug levels, you can either add them or
+# use multiple debug lines.
+#
# A debug level of 1 is informative because it will show you each
-# request as it happens. 1, 4096 and 8192 are highly recommended so
-# that you will notice when things go wrong. The other levels are
-# probably only of interest if you are hunting down a specific
+# request as it happens. 1, 4096 and 8192 are highly recommended
+# so that you will notice when things go wrong. The other levels
+# are probably only of interest if you are hunting down a specific
# problem. They can produce a hell of an output (especially 16).
-#
-# The reporting of fatal errors (i.e. ones which crash Privoxy) is
-# always on and cannot be disabled.
-#
-# If you want to use CLF (Common Log Format), you should set "debug
-# 512" ONLY and not enable anything else.
+#
+# The reporting of fatal errors (i.e. ones which crash Privoxy)
+# is always on and cannot be disabled.
+#
+# If you want to use CLF (Common Log Format), you should set
+# "debug 512" ONLY and not enable anything else.
#
debug 1 # show each GET/POST/CONNECT request
debug 4096 # Startup banner and warnings
-debug 8192 # Errors - *we highly recommended enabling this*
-
+debug 8192 # Errors - *we highly recommended enabling this
# 3.2. single-threaded
# ====================
#
# Specifies:
-#
+#
# Whether to run only one server thread
-#
+#
# Type of value:
-#
+#
# None
-#
+#
# Default value:
-#
+#
# Unset
-#
+#
# Effect if unset:
-#
-# Multi-threaded (or, where unavailable: forked) operation, i.e.
-# the ability to serve multiple requests simultaneously.
-#
+#
+# Multi-threaded (or, where unavailable: forked) operation,
+# i.e. the ability to serve multiple requests simultaneously.
+#
# Notes:
-#
-# This option is only there for debug purposes and you should never
-# need to use it. It will drastically reduce performance.
-#
+#
+# This option is only there for debug purposes and you should
+# never need to use it. It will drastically reduce performance.
+#
#single-threaded
#
# This section of the config file controls the security-relevant
# aspects of Privoxy's configuration.
-#
-#
+
# 4.1. listen-address
# ===================
#
# Specifies:
-#
+#
# The IP address and TCP port on which Privoxy will listen for
# client requests.
-#
+#
# Type of value:
-#
+#
# [IP-Address]:Port
-#
+#
# Default value:
-#
+#
# 127.0.0.1:8118
-#
+#
# Effect if unset:
-#
+#
# Bind to 127.0.0.1 (localhost), port 8118. This is suitable and
-# recommended for home users who run Privoxy on the same machine as
-# their browser.
-#
+# recommended for home users who run Privoxy on the same machine
+# as their browser.
+#
# Notes:
-#
+#
# You will need to configure your browser(s) to this proxy address
# and port.
-#
-# If you already have another service running on port 8118, or if
-# you want to serve requests from other machines (e.g. on your
+#
+# If you already have another service running on port 8118, or
+# if you want to serve requests from other machines (e.g. on your
# local network) as well, you will need to override the default.
-#
+#
# If you leave out the IP address, Privoxy will bind to all
# interfaces (addresses) on your machine and may become reachable
# from the Internet. In that case, consider using access control
-# lists (acl's) (see "ACLs" below), or a firewall.
-#
+# lists (ACL's, see below), and/or a firewall.
+#
+# If you open Privoxy to untrusted users, you will also want
+# to turn off the enable-edit-actions and enable-remote-toggle
+# options!
+#
# Example:
-#
+#
# Suppose you are running Privoxy on a machine which has the
# address 192.168.0.1 on your local private network (192.168.0.0)
# and has another outside connection with a different address. You
# want it to serve requests from inside only:
-#
-# listen-address 192.168.0.1:8118
-#
-listen-address 127.0.0.1:8118
+#
+# listen-address 192.168.0.1:8118
+#
+listen-address 127.0.0.1:8118
-
# 4.2. toggle
# ===========
#
# Specifies:
-#
+#
# Initial state of "toggle" status
-#
+#
# Type of value:
-#
+#
# 1 or 0
-#
+#
# Default value:
-#
+#
# 1
-#
+#
# Effect if unset:
-#
+#
# Act as if toggled on
-#
+#
# Notes:
-#
-# If set to 0, Privoxy will start in "toggled off" mode, i.e.
-# behave like a normal, content-neutral proxy. See
-# enable-remote-toggle below. This is not really useful anymore,
-# since toggling is much easier via the web interface then via
-# editing the conf file.
-#
+#
+# If set to 0, Privoxy will start in "toggled off" mode,
+# i.e. behave like a normal, content-neutral proxy where all ad
+# blocking, filtering, etc are disabled. See enable-remote-toggle
+# below. This is not really useful anymore, since toggling is
+# much easier via the web interface than via editing the conf file.
+#
# The windows version will only display the toggle icon in the
# system tray if this option is present.
-#
-#
-toggle 1
-
+#
+toggle 1
# 4.3. enable-remote-toggle
# =========================
#
# Specifies:
-#
+#
# Whether or not the web-based toggle feature may be used
-#
+#
# Type of value:
-#
+#
# 0 or 1
-#
+#
# Default value:
-#
+#
# 1
-#
+#
# Effect if unset:
-#
+#
# The web-based toggle feature is disabled.
-#
+#
# Notes:
-#
+#
# When toggled off, Privoxy acts like a normal, content-neutral
-# proxy, i.e. it acts as if none of the actions applied to any
-# URL.
-#
+# proxy, i.e. it acts as if none of the actions applied to
+# any URL.
+#
# For the time being, access to the toggle feature can not be
# controlled separately by "ACLs" or HTTP authentication, so that
# everybody who can access Privoxy (see "ACLs" and listen-address
# above) can toggle it for all users. So this option is not
# recommended for multi-user environments with untrusted users.
-#
+#
# Note that you must have compiled Privoxy with support for this
# feature, otherwise this option has no effect.
-#
-enable-remote-toggle 1
-
+#
+enable-remote-toggle 1
# 4.4. enable-edit-actions
# ========================
#
# Specifies:
-#
+#
# Whether or not the web-based actions file editor may be used
-#
+#
# Type of value:
-#
+#
# 0 or 1
-#
+#
# Default value:
-#
+#
# 1
-#
+#
# Effect if unset:
-#
+#
# The web-based actions file editor is disabled.
-#
+#
# Notes:
-#
+#
# For the time being, access to the editor can not be controlled
# separately by "ACLs" or HTTP authentication, so that everybody
-# who can access Privoxy (see "ACLs" and listen-address above) can
-# modify its configuration for all users. So this option is not
-# recommended for multi-user environments with untrusted users.
-#
+# who can access Privoxy (see "ACLs" and listen-address above)
+# can modify its configuration for all users. So this option is
+# not recommended for multi-user environments with untrusted users.
+#
# Note that you must have compiled Privoxy with support for this
# feature, otherwise this option has no effect.
-#
+#
enable-edit-actions 1
-
# 4.5. ACLs: permit-access and deny-access
# ========================================
#
# Specifies:
-#
+#
# Who can access what.
-#
+#
# Type of value:
-#
+#
# src_addr[/src_masklen] [dst_addr[/dst_masklen]]
-#
+#
# Where src_addr and dst_addr are IP addresses in dotted decimal
# notation or valid DNS names, and src_masklen and dst_masklen are
-# subnet masks in CIDR notation, i.e. integer values from 2 to 32
+# subnet masks in CIDR notation, i.e. integer values from 2 to 30
# representing the length (in bits) of the network address. The
# masks and the whole destination part are optional.
-#
+#
# Default value:
-#
+#
# Unset
-#
+#
# Effect if unset:
-#
+#
# Don't restrict access further than implied by listen-address
-#
+#
# Notes:
-#
+#
# Access controls are included at the request of ISPs and systems
-# administrators, and are not usually needed by individual users.
-# For a typical home user, it will normally suffice to ensure that
-# Privoxy only listens on the localhost or internal (home) network
-# address by means of the listen-address option.
-#
+# administrators, and are not usually needed by individual
+# users. For a typical home user, it will normally suffice to
+# ensure that Privoxy only listens on the localhost (127.0.0.1)
+# or internal (home) network address by means of the listen-address
+# option.
+#
# Please see the warnings in the FAQ that this proxy is not
-# intended to be a substitute for a firewall or to encourage anyone
-# to defer addressing basic security weaknesses.
-#
-# Multiple ACL lines are OK. If any ACLs are specified, then the
-# Privoxy talks only to IP addresses that match at least one
+# intended to be a substitute for a firewall or to encourage
+# anyone to defer addressing basic security weaknesses.
+#
+# Multiple ACL lines are OK. If any ACLs are specified, then
+# the Privoxy talks only to IP addresses that match at least one
# permit-access line and don't match any subsequent deny-access
-# line. In other words, the last match wins, with the default being
-# deny-access.
-#
+# line. In other words, the last match wins, with the default
+# being deny-access.
+#
# If Privoxy is using a forwarder (see forward below) for a
-# particular destination URL, the dst_addr that is examined is the
-# address of the forwarder and NOT the address of the ultimate
+# particular destination URL, the dst_addr that is examined is
+# the address of the forwarder and NOT the address of the ultimate
# target. This is necessary because it may be impossible for the
# local Privoxy to determine the IP address of the ultimate target
# (that's often what gateways are used for).
-#
-# You should prefer using IP addresses over DNS names, because the
-# address lookups take time. All DNS names must resolve! You can
-# not use domain patterns like "*.org" or partial domain names. If
-# a DNS name resolves to multiple IP addresses, only the first one
-# is used.
-#
-# Denying access to particular sites by ACL may have undesired side
-# effects if the site in question is hosted on a machine which also
-# hosts other sites.
-#
+#
+# You should prefer using IP addresses over DNS names, because
+# the address lookups take time. All DNS names must resolve! You
+# can not use domain patterns like "*.org" or partial domain
+# names. If a DNS name resolves to multiple IP addresses, only
+# the first one is used.
+#
+# Denying access to particular sites by ACL may have undesired
+# side effects if the site in question is hosted on a machine
+# which also hosts other sites.
+#
# Examples:
-#
+#
# Explicitly define the default behavior if no ACL and
# listen-address are set: "localhost" is OK. The absence of a
# dst_addr implies that all destination addresses are OK:
-#
-# permit-access localhost
-#
-#
+#
+# permit-access localhost
+#
# Allow any host on the same class C subnet as www.privoxy.org
# access to nothing but www.example.com:
-#
-# permit-access www.privoxy.org/24 www.example.com/32
-#
-#
-# Allow access from any host on the 26-bit subnet 192.168.45.64 to
-# anywhere, with the exception that 192.168.45.73 may not access
-# www.dirty-stuff.example.com:
-#
-# permit-access 192.168.45.64/26
-# deny-access 192.168.45.73 www.dirty-stuff.example.com
-#
-
+#
+# permit-access www.privoxy.org/24 www.example.com/32
+#
+# Allow access from any host on the 26-bit subnet 192.168.45.64
+# to anywhere, with the exception that 192.168.45.73 may not
+# access www.dirty-stuff.example.com:
+#
+# permit-access 192.168.45.64/26
+# deny-access 192.168.45.73 www.dirty-stuff.example.com
+#
# 4.6. buffer-limit
# =================
#
# Specifies:
-#
+#
# Maximum size of the buffer for content filtering.
-#
+#
# Type of value:
-#
+#
# Size in Kbytes
-#
+#
# Default value:
-#
+#
# 4096
-#
+#
# Effect if unset:
-#
+#
# Use a 4MB (4096 KB) limit.
-#
+#
# Notes:
-#
+#
# For content filtering, i.e. the +filter and +deanimate-gif
# actions, it is necessary that Privoxy buffers the entire document
# body. This can be potentially dangerous, since a server could
# just keep sending data indefinitely and wait for your RAM to
-# exhaust -- with nasty consequences. Hence this option.
-#
+# exhaust -- with nasty consequences. Hence this option.
+#
# When a document buffer size reaches the buffer-limit, it is
# flushed to the client unfiltered and no further attempt to filter
# the rest of the document is made. Remember that there may be
# multiple threads running, which might require up to buffer-limit
# Kbytes each, unless you have enabled "single-threaded" above.
-#
+#
buffer-limit 4096
# 5. FORWARDING
# =============
#
-# This feature allows routing of HTTP requests through a chain of
-# multiple proxies. It can be used to better protect privacy and
-# confidentiality when accessing specific domains by routing requests
-# to those domains through an anonymous public proxy (see e.g.
-# http://www.multiproxy.org/anon_list.htm) Or to use a caching proxy to
-# speed up browsing. Or chaining to a parent proxy may be necessary
-# because the machine that Privoxy runs on has no direct Internet
-# access.
-#
-# Also specified here are SOCKS proxies. Privoxy supports the SOCKS 4
-# and SOCKS 4A protocols.
-#
-
+# This feature allows routing of HTTP requests through a chain
+# of multiple proxies. It can be used to better protect privacy
+# and confidentiality when accessing specific domains by routing
+# requests to those domains through an anonymous public proxy (see
+# e.g. http://www.multiproxy.org/anon_list.htm) Or to use a caching
+# proxy to speed up browsing. Or chaining to a parent proxy may be
+# necessary because the machine that Privoxy runs on has no direct
+# Internet access.
+#
+# Also specified here are SOCKS proxies. Privoxy supports the SOCKS
+# 4 and SOCKS 4A protocols.
# 5.1. forward
# ============
-#
+#
# Specifies:
-#
+#
# To which parent HTTP proxy specific requests should be routed.
-#
+#
# Type of value:
-#
-# target_domain[:port] http_parent[:port]
-#
-# Where target_domain is a domain name pattern (see the chapter on
-# domain matching in the actions file), http_parent is the address
-# of the parent HTTP proxy as an IP addresses in dotted decimal
-# notation or as a valid DNS name (or "." to denote "no
-# forwarding", and the optional port parameters are TCP ports, i.e.
-# integer values from 1 to 64535
-#
+#
+# target_domain[:port] http_parent[/port]
+#
+# Where target_domain is a domain name pattern (see the chapter
+# on domain matching in the default.action file), http_parent
+# is the address of the parent HTTP proxy as an IP addresses in
+# dotted decimal notation or as a valid DNS name (or "." to denote
+# "no forwarding", and the optional port parameters are TCP ports,
+# i.e. integer values from 1 to 64535
+#
# Default value:
-#
+#
# Unset
-#
+#
# Effect if unset:
-#
+#
# Don't use parent HTTP proxies.
-#
+#
# Notes:
-#
-# If http_parent is ".", then requests are not forwarded to another
-# HTTP proxy but are made directly to the web servers.
-#
-# Multiple lines are OK, they are checked in sequence, and the last
-# match wins.
-#
+#
+# If http_parent is ".", then requests are not forwarded to
+# another HTTP proxy but are made directly to the web servers.
+#
+# Multiple lines are OK, they are checked in sequence, and the
+# last match wins.
+#
# Examples:
-#
+#
# Everything goes to an example anonymizing proxy, except SSL on
# port 443 (which it doesn't handle):
-#
-# forward .* anon-proxy.example.org:8080
-# forward :443 .
-#
-#
+#
+# forward .* anon-proxy.example.org:8080
+# forward :443 .
+#
# Everything goes to our example ISP's caching proxy, except for
# requests to that ISP's sites:
-#
-# forward .*. caching-proxy.example-isp.net:8000
-# forward .example-isp.net .
-#
-
+#
+# forward .*. caching-proxy.example-isp.net:8000
+# forward .example-isp.net .
+#
# 5.2. forward-socks4 and forward-socks4a
# =======================================
-#
+#
# Specifies:
-#
+#
# Through which SOCKS proxy (and to which parent HTTP proxy)
# specific requests should be routed.
-#
+#
# Type of value:
-#
-# target_domain[:port] socks_proxy[:port] http_parent[:port]
-#
-# Where target_domain is a domain name pattern (see the chapter on
-# domain matching in the actions file), http_parent and socks_proxy
-# are IP addresses in dotted decimal notation or valid DNS names
-# (http_parent may be "." to denote "no HTTP forwarding"), and the
-# optional port parameters are TCP ports, i.e. integer values from
-# 1 to 64535
-#
+#
+# target_domain[:port] socks_proxy[/port] http_parent[/port]
+#
+# Where target_domain is a domain name pattern (see the chapter
+# on domain matching in the default.action file), http_parent
+# and socks_proxy are IP addresses in dotted decimal notation
+# or valid DNS names (http_parent may be "." to denote "no HTTP
+# forwarding"), and the optional port parameters are TCP ports,
+# i.e. integer values from 1 to 64535
+#
# Default value:
-#
+#
# Unset
-#
+#
# Effect if unset:
-#
+#
# Don't use SOCKS proxies.
-#
+#
# Notes:
-#
-# Multiple lines are OK, they are checked in sequence, and the last
-# match wins.
-#
-# The difference between forward-socks4 and forward-socks4a is that
-# in the SOCKS 4A protocol, the DNS resolution of the target
-# hostname happens on the SOCKS server, while in SOCKS 4 it happens
-# locally.
-#
+#
+# Multiple lines are OK, they are checked in sequence, and the
+# last match wins.
+#
+# The difference between forward-socks4 and forward-socks4a
+# is that in the SOCKS 4A protocol, the DNS resolution of the
+# target hostname happens on the SOCKS server, while in SOCKS 4
+# it happens locally.
+#
# If http_parent is ".", then requests are not forwarded to another
# HTTP proxy but are made (HTTP-wise) directly to the web servers,
# albeit through a SOCKS proxy.
-#
+#
# Examples:
-#
+#
# From the company example.com, direct connections are made to all
# "internal" domains, but everything outbound goes through their
-# ISP's proxy by way of example.com's corporate SOCKS 4A gateway to
-# the Internet.
-#
-# forward-socks4a .*. socks-gw.example.com:1080 www-cache.example-isp.net:8080
+# ISP's proxy by way of example.com's corporate SOCKS 4A gateway
+# to the Internet.
+#
+# forward-socks4a .*. socks-gw.example.com:1080 www-cache.example-isp.net:8080
# forward .example.com .
-#
-#
+#
# A rule that uses a SOCKS 4 gateway for all destinations but no
# HTTP parent looks like this:
-#
-# forward-socks4 .*. socks-gw.example.com:1080 .
-#
-# See the user manual for more advanced examples.
-#
+#
+# forward-socks4 .*. socks-gw.example.com:1080 .
# 6. WINDOWS GUI OPTIONS
#
# Privoxy has a number of options specific to the Windows GUI
# interface:
-#
+
# If "activity-animation" is set to 1, the Privoxy icon will animate
# when "Privoxy" is active. To turn off, set to 0.
-#
-#activity-animation 1
+#
+#activity-animation 1
+#
# If "log-messages" is set to 1, Privoxy will log messages to the
# console window:
-#
-#log-messages 1
-
-# If "log-buffer-size" is set to 1, the size of the log buffer, i.e.
-# the amount of memory used for the log messages displayed in the
-# console window, will be limited to "log-max-lines" (see below).
+#
+#log-messages 1
+#
+
+# If "log-buffer-size" is set to 1, the size of the log buffer,
+# i.e. the amount of memory used for the log messages displayed in
+# the console window, will be limited to "log-max-lines" (see below).
#
# Warning: Setting this to 0 will result in the buffer to grow
# infinitely and eat up all your memory!
-#
+#
#log-buffer-size 1
+#
-# log-max-lines is the maximum number of lines held in the log buffer.
-# See above.
-#
+# log-max-lines is the maximum number of lines held in the log
+# buffer. See above.
+#
#log-max-lines 200
+#
# If "log-highlight-messages" is set to 1, Privoxy will highlight
# portions of the log messages with a bold-faced font:
-#
+#
#log-highlight-messages 1
-#
-
+#
+
# The font used in the console window:
-#
+#
#log-font-name Comic Sans MS
-#
-
+#
+
# Font size used in the console window:
-#
+#
#log-font-size 8
-#
-
-# "show-on-task-bar" controls whether or not Privoxy will appear as a
-# button on the Task bar when minimized:
-#
+#
+
+# "show-on-task-bar" controls whether or not Privoxy will appear as
+# a button on the Task bar when minimized:
+#
#show-on-task-bar 0
-#
-
+#
+
# If "close-button-minimizes" is set to 1, the Windows close button
-# will minimize Privoxy instead of closing the program (close with the
-# exit option on the File menu).
-#
+# will minimize Privoxy instead of closing the program (close with
+# the exit option on the File menu).
+#
#close-button-minimizes 1
-#
-
+#
+
# The "hide-console" option is specific to the MS-Win console version
-# of Privoxy. If this option is used, Privoxy will disconnect from and
-# hide the command console.
-#
+# of Privoxy. If this option is used, Privoxy will disconnect from
+# and hide the command console.
+#
#hide-console
-#
+#
projects / privoxy.git / commitdiff