Privoxy 3.0.29 fixes a couple of memory leaks and introduces https inspection
- which allows to filter encrypted requests and responses.
-
Changes in Privoxy 3.0.29 stable:
+
Privoxy 3.0.31 fixes two security issues that were discovered while preparing
+ the 3.0.30 release. The issues also affect earlier Privoxy releases.
+
Changes in Privoxy 3.0.31 stable:
Security/Reliability:
-
Fixed memory leaks when a response is buffered and the buffer limit is reached or Privoxy is running out
- of memory. Commits bbd53f1010b and 4490d451f9b. OVE-20201118-0001. Sponsored by: Robert Klemme
+
Prevent an assertion from getting triggered by a crafted CGI request. Commit 5bba5b89193fa.
+ OVE-20210130-0001. Reported by: Joshua Rogers (Opera)
-
Fixed a memory leak in the show-status CGI handler when no action files are configured. Commit
- c62254a686. OVE-20201118-0002. Sponsored by: Robert Klemme
+
Fixed a memory leak when decompression fails "unexpectedly". Commit f431d61740cc0.
+ OVE-20210128-0001.
+
+
+
+
Bug fixes:
+
-
Fixed a memory leak in the show-status CGI handler when no filter files are configured. Commit
- 1b1370f7a8a. OVE-20201118-0003. Sponsored by: Robert Klemme
+
Fixed detection of insufficient data for decompression. Previously Privoxy could try to decompress a
+ partly uninitialized buffer.
+
+
+
+
Changes in Privoxy 3.0.30 stable:
+
+
+
Bug fixes:
+
-
Fixes a memory leak when client tags are active. Commit 245e1cf32. OVE-20201118-0004. Sponsored by:
- Robert Klemme
+
Check the actual URL for redirects when https inspecting requests. Previously Privoxy would only check
+ the path which resulted in rewrite results being rejected as invalid URLs. Reported by withoutname in
+ #1736.
-
Fixed a memory leak if multiple filters are executed and the last one is skipped due to a pcre error.
- Commit 5cfb7bc8fe. OVE-20201118-0005.
+
Let the hide-referrer code tolerate Referer headers with https:// URLs. Previously they would always be
+ treated like a changed host.
-
Prevent an unlikely dereference of a NULL-pointer that could result in a crash if
- accept-intercepted-requests was enabled, Privoxy failed to get the request destination from the Host header
- and a memory allocation failed. Commit 7530132349. CID 267165. OVE-20201118-0006.
+
Use the https headers if the show-request handler is reached through https://. Previously Privoxy would
+ use the http headers which may be empty on a reused connection.
-
Fixed memory leaks in the client-tags CGI handler when client tags are configured and memory allocations
- fail. Commit cf5640eb2a. CID 267168. OVE-20201118-0007.
+
Make CGI_PREFIX protocol-relative when building with FEATURE_HTTPS_INSPECTION. This unbreaks (at least)
+ https://config.privoxy.org/client-tags whose buttons would previously use a http:// URL resulting in
+ browser warnings.
-
Fixed memory leaks in the show-status CGI handler when memory allocations fail. Commit 064eac5fd0 and
- commit fdee85c0bf3. CID 305233. OVE-20201118-0008.
+
Support using https-inspection and client-header-order at the same time. Previously Privoxy would crash.
+ Reported by: Kai Raven
+
+
+
Properly reject rewrites from http to https as they currently aren't supported. Previously Privoxy would
+ wait for the client to establish an encrypted connection which obviously would not happen.
+
+
+
When https inspection is enabled and Privoxy has been compiled with FEATURE_GRACEFUL_TERMINATION (not
+ recommended for production builds), the TLS backend resources are free'd later on and only if no active
+ connections are left. Prevents crashes when exiting "gracefully" at the wrong time.
+
+
+
Let the uninstall target remove the config file even if DESTDIR is set and properly announce the
+ deletion of the configuration files.
@@ -73,366 +100,550 @@
General improvements:
-
Added experimental https inspection support which allows to filter https traffic. To enable it, install
- MbedTLS and configure with --with-mbedtls, or install OpenSSL or LibreSSL and configure with
- --with-openssl. Afterwards configure the directives in section 7 of the config file and enable the
- +https-inspection action. Initial MbedTLS-based code contributed by Vaclav Svec, initial OpenSSL support
- contributed by Maxim Antonov. With help from Nedzad Hrnjica and Ho+ Ho+ Ho+. Integration and improvements
- sponsored by Robert Klemme.
+
Allow to rewrite the request destination for https-inspected requests behind the client's back. The
+ documentation already sort of claimed that it was supported by not especially mentioning that it didn't
+ work for https-inspected requests. Fixes SF bug #923 reported by withoutname.
-
pcrs: Request JIT compilation if it's supported and the filter isn't dynamic. This can speed up
- filtering.
+
Add support for filtering client request bodies by using CLIENT-BODY-FILTER filters which can be enabled
+ with the client-body-filter action. Patch submitted by Maxim Antonov. Sponsored by: Robert Klemme
-
Added support for Brotli decompression. Sponsored by: Robert Klemme
+
Add the new action suppress-tag{} which can be used to prevent a tagger from adding a tag. Patch
+ submitted by Maxim Antonov. Sponsored by: Robert Klemme
-
Added FEATURE_EXTENDED_STATISTICS to gather statistics for block reasons and filter executions. To
- enable it, configure with --enable-extended-statistics and visit http://config.privoxy.org/show-status.
- Sponsored by: Robert Klemme
+
Gracefully handle existing website keys without matching certificates. This can happen if Privoxy was
+ previously running with an invalid TLS configuration that didn't allow it to create a certificate.
-
Use the IP_FREEBIND socket option, if defined. This allows Privoxy to bind to not-yet assigned IP
- addresses which is useful in failover environments. Patch by Sam Varshavchik.
+
Recycle debug bit 4 for Tagging-related messages.
-
Allow to use extended host patterns and vanilla host patterns at the same time by prefixing extended
- host patterns with "PCRE-HOST-PATTERN:". To enable this, configure with --enable-pcre-host-patterns.
- Sponsored by: Robert Klemme
+
Improve the message shown when the client-tags CGI page is requested with no tags configured.
-
Added "Cross-origin resource sharing" (CORS) support. This allows to access Privoxy's CGI interface via
- JavaScript from another domain (white-listed with the new cors-allowed-origin directive). Based on a patch
- by Nedzad Hrnjica. Sponsored by: Robert Klemme.
+
Shorten the 'donate' and 'participate' links used by templates using redirects. Currently the redirects
+ lead to the FAQ entries but in the future we may want to relocate the content and using redirects makes
+ this more convenient.
-
Add SOCKS5 username/password support. Based on a patch by Sam, improved by Ivan Romanov. Closes
- Patch#141 and solves TODO#105.
+
Log an error when a PCRE-HOST-PATTERN is used with FEATURE_PCRE_HOST_PATTERNS disabled. Don't treat this
+ a fatal error so the regression tests can be used with and without FEATURE_PCRE_HOST_PATTERNS.
-
Bump the maximum number of action and filter files to 100 each. Sponsored by: Robert Klemme
+
The code compiles with older C compilers again.
-
Fixed handling of filters with "split-large-forms 1" when using the CGI editor. Reported by withoutname
- in #921.
+
The chdir() return code is checked to fix a compiler warning.
-
Better detect a mismatch of connection details when figuring out whether or not a connection can be
- reused.
+
The packages feed has been removed from the source tarball. It's usually out of date when the source
+ tarball is generated for the release.
-
Don't send a "Connection failure" message instead of the "DNS failure" message. Sponsored by: Robert
- Klemme
+
Fixed harmless compiler warnings from GCC9 with -D_FORTIFY_SOURCE=2.
-
Let LOG_LEVEL_REQUEST log all requests. Previously unencrypted requests were only logged with
- LOG_LEVEL_REQUEST when they weren't crunched (in which case they were logged with LOG_LEVEL_CRUNCH). This
- was documented behaviour, but logging all requests seems more useful.
windows: Install the images referenced in the user manual.
-
Removed OS/2 support. We haven't provided OS/2 packages in years, it complicated the code and it
- depended on a fallback snprintf() implementation which is GPLv2 only.
+
Remove obsolete 'gnu_regex.@OBJEXT@' target.
-
Remove the fallback snprintf() implementation Now that OS/2 support is gone we no longer need it.
+
When installing from the GNUMAkefile, don't create an 'images' directory which is no longer used. The
+ images were relocated to the user-manual directory years ago.
-
Fixed a bunch of format specifiers log messages.
+
Add new FEATURES to the show-status page and resort list.
-
Added a missing apostrophe in the 'More Privoxy' menu.
+
Remove unused variable in the OpenSSL-specific code.
-
Explicitly prevent use of FEATURE_CONNECTION_SHARING without FEATURE_CONNECTION_KEEP_ALIVE. It makes no
- sense and does not compile anyway. Sponsored by: Robert Klemme
+
Update bug tracker URL in cgi_error_unknown().
-
Fix build without FEATURE_CONNECTION_KEEP_ALIVE. Sponsored by: Robert Klemme
+
Saved a couple of memory allocations when sorting client headers.
-
Downgrade the 'Graceful termination requested' message to LOG_LEVEL_INFO as it isn't an error. Sponsored
- by: Robert Klemme
+
Improved a couple of error messages.
-
decompress_iob(): Downgrade the no-content message to LOG_LEVEL_RE_FILTER While at it, fix a typo in a
- comment. Sponsored by: Robert Klemme
+
Saved memory allocations when using OpenSSL and checking if a key already exists.
-
Fixed a couple of cppcheck warnings.
+
The configure script will bail out if OpenSSL and mbedTLS are enabled at the same time.
-
Rename LOG_LEVEL_GPC to LOG_LEVEL_REQUEST. Only the shadow knows what "GPC" is supposed to stand
- for.
+
Log a message right before exiting gracefully.
-
Remove SourceForge references in copyright headers.
+
A couple of structures have been rearranged to require slightly less memory.
-
Upgrade a bunch of links to the homepage to https://.
+
When https inspection is enabled and the certificate is invalid the error message is now sent with
+ status code 403 instead of 200.
-
Add 'no-brotli-accepted' filter which prevents the use of Brotli compression.
+
The Slackware rc script template has been renamed to slackware/rc.privoxy.in to silence complaints when
+ building Debian packages.
-
Changed license for pcrs to GPLv2+ after getting the permission from Andreas. This allows to
- redistribute Privoxy under the GPLv3 which is required when linking to future mbedTLS versions which are
- expected to be licensed under the Apache 2.0 license only.
+
When building with MbedTLS support, mbedtls_md5_ret() is used instead of mbedtls_md5() which is
+ deprecated and causes a warning on Debian GNU/Linux.
+
+
+
+
Action file improvements:
+
-
Updated a bunch of tests that have to expect status code 403 now after r1.168/070e904afa5.
+
Block requests to eu-tlp03.kameleoon.com/.
-
Lowercase the host name in the request line.
+
Unblock metrics.sr.ht/.
-
Only set SOURCE_DATE_EPOCH if it's not already set so distributions can overwrite it through the
- environment.
+
Disable fast-redirects for .fsf.org/.
+
+
+
Disable fast-redirects for .gravater.com/.
+
+
+
Disable fast-redirects for .ksta.de/.
+
+
+
Block requests to tag.crsspxl.com/.
+
+
+
Block requests to analytics.slashdotmedia.com/.
+
+
+
Block requests to ml314.com/.
+
+
+
Block requests to .adroll.com/.
+
+
+
Block requests to fastlane.rubiconproject.com/.
+
+
+
Block requests to api.theadex.com/.
+
+
+
Block requests to ih.adscale.de/.
+
+
+
Block requests to .s400.meetrics.net/.
+
+
+
Block requests for pp.lp4.io/.
+
+
+
Block requests for trc-events.taboola.com/.
+
+
+
+
+
Filter file improvements:
+
+
+
A allow-autocompletion filter has been added which changes autocomplete="off" to "on" on input fields to
+ allow autocompletion. Requested by Jamie Zawinski in #370. Filter based on a submission by Aaron
+ Linville.
+
+
+
Added an imdb filter.
+
+
+
Added a sourceforge filter that reduces the amount of ads for proprietary software.
+
+
+
Added a github filter that removes the annoying "Sign-Up" banner and the Cookie disclaimer.
+
+
+
Removed a duplicated pcrs command from the js-annoyances filter.
+
+
+
The crude-parental filter now provides a short reason when blocking, inserts a link to Privoxy's
+ webinterface and adds a new line at the end of the generated page.
-
Documentation changes:
+
Privoxy-Log-Parser:
-
Explain that Privoxy has to be distributed under the GPLv3 (or later) when linked with an MbedTLS
- version that is licensed under the Apache 2.0 license.
+
Highlight a few more messages.
+
+
+
Add a handler for tagging messages.
-
Import the GNU GPLv3 and include it the user manual.
+
Properly deal with 'Certificate error' crunches Previously the error description was highlighted as
+ 'host'.
-
Clarify FEATURE_FORCE_LOAD's description. It allows to bypass blocking not filtering and only does it if
- blocks aren't enforced. Reported by: Robert Klemme
+
Log truncated LOG_LEVEL_CLF messages more gracefully and note that the statistics will be imprecise.
-
FAQ: Remove Zwiebelfreunde e.V. from the list of fiduciary sponsors As of 2021 they no longer handle
- donations for foreign organisations due to lack of resources.
+
Fixed perldoc typo.
-
FAQ: Remove an obsolete comment with a link to the long-gone PDF manual.
+
Bump version to 0.9.2.
+
+
+
+
Privoxy-Regression-Test:
+
-
FAQ: Add a link to the TODO list.
+
Use http://127.0.0.1:8118/ as default Privoxy address unless http_proxy is set through the
+ environment.
-
FAQ: Change the sponsor amounts to USD slightly rounding the converted amounts up to get simple numbers.
- Receiving USD is apparently easier for SPI and SPI is preferred by sponsors as they can send invoices.
+
Add a --privoxy-cgi-prefix option that specifies the prefix to use when building URLs that are supposed
+ to reach Privoxy's CGI interface. If it's not set, http://p.p/ is used, which is supposed to work with the
+ default Privoxy configuration. If Privoxy has been built with FEATURE_HTTPS_INSPECTION enabled, and if
+ https inspection is activated with the +https-inspection action, this option can be used with
+ "https://p.p/" provided the system running Privoxy-Regression-Test has been configured to trust the
+ certificate used by Privoxy. Note that there are currently two tests in the official
+ regression-tests.action file that are expected to fail when using "https://p.p/" as privoxy-cgi-prefix.
-
Advertise the client-tags CGI page in the user manual.
+
Skip the connection-established response in get_status_code() when looking for the status code with a
+ CGI prefix that starts with https://. We care about the status code sent by the impersonated web
+ server.
-
Stop advertising the show-version CGI page which no longer exists.
+
Use --proxy-header when using a CGI prefix with https:// and a "Host:" header.
-
Add yet another reason why +prevent-compression may cause problems.
+
Allow '|' in tokens and values to allow tag patterns like
+ "TAG:^(application|text)/(x-)?javascript$".
-
Don't claim that contributors need ssh. It's only needed for committers.
+
When get_cgi_page_or_else() fails, include the URL of the requested page in the log message.
-
Replace obsolete CVS instructions with Git instructions.
+
Added a --check-bad-ssl option that can be used to verify that Privoxy detects certificate problems when
+ accessing the test sites from badssl.com.
-
Remove an obsolete comment
+
Bumped version to 0.7.2
-
Config file changes:
+
uagen:
-
Change the suggested default-server-timeout to 5 to match the suggested keep-alive-timeout. Otherwise
- using the defaults would result in Privoxy reducing the default-server-timeout and logging an error
- message. Sponsored by: Robert Klemme
+
Update example output.
+
+
+
Recommend the use of the https-inspection action in the documentation.
-
Update the 'debug 1' description.
+
Upgrade a couple of URLs to https://.
-
Add a missing 'client-specific-tag' directive.
+
Add ElectroBSD to the list of operating systems.
-
Comment out trusted-cgi-referer pointing to example.org.
+
Bumped generated Firefox version to 78 (ESR).
+
+
+
Bumped version to 1.2.2.
-
Action file improvements:
+
User documentation:
-
Block requests to /(.*/)?piwik\.php
+
Remove reference to 'How to Report Bugs Effectively'. It was only rendered as text without URL in the
+ README anyway and there's no indication that users read it ...
+
+
+
Let the dok-readme target fix the location embedded into the README file. This used to be done by CVS
+ but since the git migration it has to be done through other means.
+
+
+
Remove 'experimental' warning for client-specific-tag-related directives. They seem to work reliably and
+ there is no obvious reason why we would change the syntax in the near future.
+
+
+
Describe how to check if Privoxy has been built with FEATURE_HTTPS_INSPECTION.
+
+
+
Add a link to the trusted-cas-file documentation that explains how the user can create the file
+ herself.
+
+
+
Don't explicitly mention the license for the code coming from 'Anonymous Coders' and Junkbusters. It's
+ obviously licensed under the GNU GPL like the rest of Privoxy or we wouldn't be allowed to distribute
+ it.
+
+
+
Update the +hide-user-agent example with uagen output.
+
+
+
Slightly improve the wording of the ca-key-file documentation.
+
+
+
Explicitly mention Windows 10 as supported so search engines and users looking for it can find it.
-
Block requests to .connectaserver.de/
+
Import a bunch of contributors from the ChangeLog.
-
Block requests to pixel.inforsea.com/
+
Remove obsolete doc/gpl.html.
-
Block requests to t.vi-serve.com/
+
Upgrade a couple of links to https://.
-
Block requests to .ioam.de/
+
Don't prefer the SourceForge patch tracker over the privoxy-devel mailing list. While at it, link to the
+ SourceForge patch tracker.
-
Block requests to t.9gag.com/img.gif
+
Mention http-inspection in the 'my browser warns me about unauthenticated content' FAQ entry.
-
Block requests to .pixel.parsely.com/ as image
+
Simplify the 'Is there is a license or fee?' FAQ entry.
-
Block requests to pixel.wp.com/
+
Add another +redirect{} example.
-
Disable fast-redirects for .librarything.com/
+
Explicitly mention that interested sponsors should include the link target in their first mail.
-
Disable fast-redirects for issue.freebsdfoundation.org/
+
Clarify that only Privoxy team members can object to new sponsors and link to the list of current team
+ members.
-
Disable fast-redirects for .twitter.com/.*origin=http
+
Note that sponsor URLs may not contain keyword spam.
-
Unblock belco24.de/
+
Garbage collect doc/webserver/images which isn't referenced anymore.
-
Add fast-redirects exception for .wikipedia.org/
+
Update the method to reach the proxy settings in Firefox.
-
Add fast-redirects exception for oss-fuzz.com/
+
Update proxy_setup.jpg description to refer to Firefox.
-
Disable fast-redirects for .consensu.org/delivery/pixel\.php and block the requests as image instead
+
Regenerate proxy_setup.jpg with a more recent Firefox (78.0).
-
Unblock .adbinstaller.com/ Reported by lvm in #942.
+
Regenerate files-in-use.jpg without obsolete standard.action with modern colors and a slightly better
+ quality.
-
Unblock .adbshell.com Reported by lvm in #942.
+
Update URL to the actionsfile tracker.
-
Unblock .tagesschau.de/
+
Update a support request URL.
-
Disable fast-redirects for collector.githubapp.com/ and block requests to it as image instead
+
Rephrase the 'Can Privoxy run as service' FAQ entry and remove an obsolete paragraph.
-
Unblock 'ada*.'
+
Let the 'Where can I get updated Actions Files?' entry link to the gitweb version of
+ default.action.master.
-
Add fast-redirects{} exception for sourcepoint.vice.com/
+
Update a link to the default.action file.
-
Unblock adaway.org/ Reported by DRS David Soft in AF#945.
+
Update URLs for trackers and mailing lists.
-
Change two block reasons that previously were the same. Sponsored by: Robert Klemme
+
Replace CVS reference with git.
-
Added a +delay-response{} test.
+
Mention regression-tests.action in the config file.
-
Updated the location of the development version of default.action.master.
+
Explicitly mention in the config file that access to the CA key should be limited to Privoxy.
+
+
+
List more client-specific-tag examples for inspiration.
+
+
+
Add additional headers to the client-header-order example.
+
+
+
Note that actions aren't updated after rewrites.
+
+
+
Explicitly mention that upgrading from http to https with a client-header filter is not supported
+
+
+
Note that protocol and host have to be added when rewriting the destination host for https-inspected
+ requests.
+
+
+
Explicitly mention that the CA key is used to sign certificates.
+
+
+
Put openssl command in 'command' tags.
+
+
+
The man page has been moved from section 1 to man section 8.
-
Privoxy-Log-Parser:
+
Developer manual:
-
Added a --keep-date option to keep the date in highlighted messages.
+
Flesh out the build instructions for Debian.
-
Highlight new log messages.
+
Remove the packaging instructions for RPM-based systems. They don't work and we don't release RPM
+ packages anymore anyway.
-
Make gather_loglevel_clf_stats() more tolerant. While at it, count all CLF messages as requests, even if
- the request is invalid.
+
Remove the packaging instructions for Solaris. They don't work and we don't release Solaris packages
+ anymore anyway.
-
Only show HTTP version distribution if at least one version has been detected.
+
Update the suggested subject for the announce mails.
-
Only show crunch statistics if crunches were detected.
+
Update upload instructions. ftp://upload.sourceforge.net is no longer functional.
-
Warn if the request counts differ.
+
Remove a couple of package-dependent upload instructions that don't actually work.
-
Generate statistics if the log only contains LOG_LEVEL_CLF messages so it can be used with vanilla
- webserver logs. Previously Privoxy-specific "Request:" messages were required.
+
Remove 'cd current' that no longer works.
-
Align the client-HTTP-version distribution like other distributions
+
Add regression-tests.action to the list of files that should be installed.
-
Bump version to 0.9.1
+
Stop claiming that there are text versions of the manuals. We stopped building them in 2008
+ (9ed36a3c5e6f12).
-
Include status code distribution in the stats.
+
Note that the 'webserver' target creates the link needed for the user-manual.
-
Let the statistics include the size of the content Privoxy transferred excluding HTTP headers.
+
Suggest to use the master branch as reference when creating the ChangeLog so the steps work when the
+ current branch differs from master which is likely as the developer manual suggests to use a local branch
+ for development.
-
Get with the program and expect all requests to be logged with LOG_LEVEL_REQUEST. It's no longer
- necessary to count both LOG_LEVEL_REQUEST and LOG_LEVEL_CRUNCH messages to get the total number of
- requests.
+
Add the -s flag to the suggested 'git tag' command. We prefer signed tags.
+
+
+
Mention that merges into 'master' should be avoided.
+
+
+
Add git commands that should result in a merge-free history.
+
+
+
Mention Privoxy-Regression-Test.
+
+
+
Add a section id to reduce link churn.
+
+
+
Recommend the dok-tidy target when building docs for the webserver.
+
+
+
Add another plug for the privoxy-devel mailing list.
+
+
+
Let the intro link the copyright section in the user manual instead of giving an incomplete summary of
+ the license status.
+
+
+
Clarify that the webserver target uploads to the SourceForge webserver.
+
+
+
Mark the documentation for the Mac OS X installers as out of date and change the SCM name back to
+ CVS.
+
+
+
Fix the location of the installer modules for Mac OS X. They are not actually available through git
+ (yet).
+
+
+
Don't speak of Privoxy version 3 in the past tense.
-
Leverage the LOG_LEVEL_CLF message to gather statistics that where previously taken from
- LOG_LEVEL_HEADER lines. This results in less confusing results if https inspection is enabled in which case
- there are two LOG_LEVEL_HEADER lines with request lines. Sponsored by: Robert Klemme
+
Update the list of programs required for the release process.
-
Properly highlight the filter results message. Previously a brace got lost.
+
Update description of the webserver target which uses ssh, not scp.
-
Prefer the number of CLF lines to get the total number of requests as it works with older Privoxy
- versions as well.
+
Remove obsolete reference to config.new.
-
Privoxy-Regression-Test:
+
Tests:
-
Turn curl's globbing mode off so we can allow more characters in URLs.
+
Add another hide-referrer{conditional-block} test.
+
+
+
Add another hide-referrer{conditional-forge} test.
+
+
+
Fix a hide-referrer{conditional-forge} test that expected an acceptable header to be forged.
+
+
+
Fix a hide-referrer{conditional-block} test that expected an acceptable Referer to be removed.
+
+
+
Explain why the "Set Header = Host: whatever.example.org" test is expected to fail when using a CGI
+ prefix that starts with "https://".
-
Allow '[' and ']' in URLs.
+
Explain why a connection-sharing test is known to fail when using "https://p.p/" as CGI prefix.
-
Include the action file when complaining about missing Sticky Actions.
+
Add a link to Privoxy-Regression-Test to regression-tests.action in case it isn't packaged.
-
Fix a sentence in the documentation.
+
Add regression tests for pcre host patterns.
-
Bump version to 0.7.1
+
Fixed a regression test that is executed when FEATURE_GRACEFUL_TERMINATION is enabled.
-
url-pattern-translator:
+
Privoxy infrastructure:
-
Detect a couple of pattern prefixes case-insensitively. Sponsored by: Robert Klemme
+
Import a Privoxy logo for the website.
+
+
+
Update Tor onion service to HiddenServiceVersion 3.
+
+
+
Display the "model" photos in a single row and remove placeholder images.
-
Skip CLIENT-TAG patterns. Sponsored by: Robert Klemme
+
Regenerate homepage with updated sponsor list.
-
Skip patterns that have already been converted. It should now be safe to "convert" a file multiple
- times. Sponsored by: Robert Klemme
+
Use the '/sponsor' redirect for the link to the sponsor page.
-
Add the new 'PCRE-HOST-PATTERN:' prefix. Sponsored by: Robert Klemme
+
Git commit messages are sent to the Privoxy-commits mailing list.