-# $Id: privoxy-rh.spec,v 1.35 2002/05/28 03:56:59 hal9 Exp $
+# $Id: privoxy-rh.spec,v 1.45 2006/07/18 14:48:47 david__schmidt Exp $
#
# Written by and Copyright (C) 2001 the SourceForge
# Privoxy team. http://www.privoxy.org/
# ATTENTION
# Version and release should be updated acordingly on configure.in and
# configure. Otherwise, the package can be build with the wrong value
-Version: 2.9.15
-Release: 2
+Version: 3.0.3
+Release: 1
Summary: Privoxy - privacy enhancing proxy
License: GPL
-Vendor: Privoxy.Org
Source0: http://www.waldherr.org/%{name}/%{name}-%{version}.tar.gz
BuildRoot: %{_tmppath}/%{name}-%{version}-root
-Group: Networking/Utilities
+Group: System Environment/Daemons
URL: http://www.privoxy.org/
Obsoletes: junkbuster-raw junkbuster-blank junkbuster
# Prereq: /usr/sbin/useradd , /sbin/chkconfig , /sbin/service
%build
# We check to see if versions match
-VERSION_MAJOR=2
-VERSION_MINOR=9
-VERSION_POINT=15
+VERSION_MAJOR=3
+VERSION_MINOR=0
+VERSION_POINT=0
CONFIG_VERSION=`cat configure.in | sed -n -e 's/^VERSION_MAJOR=\([0-9]*\)/\1./p' -e 's/^VERSION_MINOR=\([0-9]*\)/\1./p' -e 's/^VERSION_POINT=\([0-9]*\)/\1/p' | awk '{printf $1}'`
if [ "%{version}" != "${CONFIG_VERSION}" ]; then
## Gziping the documentation files is not recomended - morcego
#gzip README AUTHORS ChangeLog %{name}.1 || /bin/true
-# Using sed to "convert" from DOS format to UNIX
-
install -s -m 744 %{name} %{buildroot}%{_sbindir}/%{name}
-cp -f %{name}.1 %{buildroot}%{_mandir}/man1/%{name}.1
+# Using sed to "convert" from DOS format to UNIX
+# This is important behaviour, and should not be removed without some
+# other assurance that these files don't get packed in the the
+# wrong format
for i in `ls *.action`
do
- cat $i | sed -e 's/\r$//' > %{buildroot}%{privoxyconf}/$i
+ cat $i | sed -e 's/[[:cntrl:]]*$//' > %{buildroot}%{privoxyconf}/$i
done
-cat default.filter | sed -e 's/\r$//' > %{buildroot}%{privoxyconf}/default.filter
-cat trust | sed -e 's/\r$//' > %{buildroot}%{privoxyconf}/trust
+cat default.filter | sed -e 's/[[:cntrl:]]*$//' > %{buildroot}%{privoxyconf}/default.filter
+cat trust | sed -e 's/[[:cntrl:]]*$//' > %{buildroot}%{privoxyconf}/trust
(
cd templates
for i in `ls`
do
-cat $i | sed -e 's/\r$//' > buildroot}%{privoxyconf}/templates/$i
+ cat $i | sed -e 's/[[:cntrl:]]*$//' > %{buildroot}%{privoxyconf}/templates/$i
done
)
+
+cp -f %{name}.1 %{buildroot}%{_mandir}/man1/%{name}.1
cp -f %{name}.logrotate %{buildroot}%{_sysconfdir}/logrotate.d/%{name}
install -m 755 %{name}.init %{buildroot}%{_sysconfdir}/rc.d/init.d/%{name}
install -m 711 -d %{buildroot}%{_localstatedir}/log/%{name}
# sed 's/^forward.*/forward \/etc\/%{name}\/forward/g' | \
# sed 's/^aclfile.*/aclfile \/etc\/%{name}\/aclfile/g' > \
sed 's@^logdir.*@logdir %{_localstatedir}/log/%{name}@g' | \
- sed -e 's/\r$//' > \
+ sed -e 's/[[:cntrl:]]*$//' > \
%{buildroot}%{privoxyconf}/config
perl -pe 's/{-no-cookies}/{-no-cookies}\n\.redhat.com/' default.action >\
%{buildroot}%{privoxyconf}/default.action
-# Creating ghost init files
-mkdir -p %{buildroot}/%{_sysconfdir}/rc.d/rc{0,1,2,3,4,5,6}.d
-for i in 0 1 4 6
-do
-ln -sf ../init.d/%{name} %{buildroot}/%{_sysconfdir}/rc.d/rc${i}.d/K09%{name}
-done
-for i in 2 3 5
-do
-ln -sf ../init.d/%{name} %{buildroot}/%{_sysconfdir}/rc.d/rc${i}.d/S84%{name}
-done
-
## Macros are expanded even on commentaries. So, we have to use %%
## -- morcego
#%%makeinstall
# We should do it for the group as well -- morcego
# Doing it by brute force. Much cleaner (no more Mr. Nice Guy) -- morcego
-# Change the group name. Remove anything left behind.
-groupmod -g %{privoxy_gid} -n %{name} %{oldname} > /dev/null 2>&1 ||:
-groupmod -g %{privoxy_gid} -n %{name} %{veryoldname} > /dev/null 2>&1 ||:
-groupdel %{oldname} > /dev/null 2>&1 ||:
-groupdel %{veryoldname} > /dev/null 2>&1 ||:
-
# Same for username
usermod -u %{privoxy_uid} -g %{privoxy_gid} -l %{name} -d %{_sysconfdir}/%{name} -s "" %{oldname} > /dev/null 2>&1 || :
usermod -u %{privoxy_uid} -g %{privoxy_gid} -l %{name} -d %{_sysconfdir}/%{name} -s "" %{veryoldname} > /dev/null 2>&1 || :
userdel %{oldname} > /dev/null 2>&1 ||:
userdel %{veryoldname} > /dev/null 2>&1 ||:
+# Change the group name. Remove anything left behind.
+groupmod -g %{privoxy_gid} -n %{name} %{oldname} > /dev/null 2>&1 ||:
+groupmod -g %{privoxy_gid} -n %{name} %{veryoldname} > /dev/null 2>&1 ||:
+groupdel %{oldname} > /dev/null 2>&1 ||:
+groupdel %{veryoldname} > /dev/null 2>&1 ||:
+
# Doublecheck to see if the group exist, and that it has the correct gid
-/bin/grep -E '^%{name}:' /etc/group > /dev/null 2>&1
+/bin/grep -E '^%{name}:' %{_sysconfdir}/group > /dev/null 2>&1
if [ $? -eq 1 ]; then
# Looks like it does not exist. Create it
groupadd -g %{privoxy_gid} %{name} > /dev/null 2>&1
else
- /bin/grep -E '^%{name}:[^:]*:%{privoxy_gid}:' /etc/group > /dev/null 2>&1
+ /bin/grep -E '^%{name}:[^:]*:%{privoxy_gid}:' %{_sysconfdir}/group > /dev/null 2>&1
if [ $? -eq 1 ]; then
# The group exists, but does not have the correct gid
groupmod -g %{privoxy_gid} %{name} > /dev/null 2>&1
# exist
id %{name} > /dev/null 2>&1
if [ $? -eq 1 ]; then
- /usr/sbin/useradd -u %{privoxy_uid} -g %{privoxy_gid} -d %{_sysconfdir}/%{name} -r -s "" %{name} > /dev/null 2>&1
+ %{_sbindir}/useradd -u %{privoxy_uid} -g %{privoxy_gid} -d %{_sysconfdir}/%{name} -r -s "" %{name} > /dev/null 2>&1
fi
# Double check that the group has the correct uid
P_UID=`id -u %{name} 2>/dev/null`
if [ $P_UID -ne %{privoxy_uid} ]; then
- /usr/sbin/usermod -u %{privoxy_uid} %{name}
+ %{_sbindir}/usermod -u %{privoxy_uid} %{name}
fi
# The same for the gid
P_GID=`id -g %{name} 2>/dev/null`
if [ $P_GID -ne %{privoxy_gid} ]; then
- /usr/sbin/usermod -g %{privoxy_gid} %{name}
+ %{_sbindir}/usermod -g %{privoxy_gid} %{name}
fi
%post
# for upgrade from 2.0.x
-[ -f %{_localstatedir}/log/%{oldname}/logfile ] &&\
- mv -f %{_localstatedir}/log/%{oldname}/logfile %{_localstatedir}/log/%{name}/logfile || /bin/true
-[ -f %{_localstatedir}/log/%{name}/%{name} ] &&\
- mv -f %{_localstatedir}/log/%{name}/%{name} %{_localstatedir}/log/%{name}/logfile || /bin/true
-chown -R %{name}:%{name} %{_localstatedir}/log/%{name} 2>/dev/null
-chown -R %{name}:%{name} /etc/%{name} 2>/dev/null
+[ -f %{_localstatedir}/log/%{oldname}/logfile ] && {
+ mv -f %{_localstatedir}/log/%{oldname}/logfile %{_localstatedir}/log/%{name}/logfile ||: ;
+ chown -R %{name}:%{name} %{_localstatedir}/log/%{name} 2>/dev/null ||: ;
+}
+[ -f %{_localstatedir}/log/%{name}/%{name} ] && {
+ mv -f %{_localstatedir}/log/%{name}/%{name} %{_localstatedir}/log/%{name}/logfile ||: ;
+ chown -R %{name}:%{name} %{_sysconfdir}/%{name} 2>/dev/null ||: ;
+}
+/sbin/chkconfig --add privoxy
if [ "$1" = "1" ]; then
- /sbin/service %{name} condrestart > /dev/null 2>&1
+ /sbin/service %{name} condrestart > /dev/null 2>&1 ||:
fi
%preun
if [ "$1" = "0" ]; then
/sbin/service %{name} stop > /dev/null 2>&1 ||:
- # No need to use chkconfig. The %%ghost files will handle it
+ /sbin/chkconfig --del privoxy
fi
%postun
#fi
# We only remove it we this is not an upgrade
if [ "$1" = "0" ]; then
- /bin/grep -E '^%{name}:' /etc/group > /dev/null && /usr/sbin/groupdel %{name} || /bin/true
- id privoxy > /dev/null 2>&1 && /usr/sbin/userdel privoxy || /bin/true
+ id privoxy > /dev/null 2>&1 && %{_sbindir}/userdel privoxy || /bin/true
+ /bin/grep -E '^%{name}:' %{_sysconfdir}/group > /dev/null && %{_sbindir}/groupdel %{name} || /bin/true
fi
%clean
%doc doc/webserver/images
%doc doc/webserver/man-page
+# ATTENTION FOR defattr change here !
+%defattr(0644,%{name},%{name},0755)
+
%dir %{privoxyconf}
%dir %{privoxyconf}/templates
-%attr(0744,%{name},%{name}) %dir %{_localstatedir}/log/%{name}
+%dir %{_localstatedir}/log/%{name}
%attr(0744,%{name},%{name})%{_sbindir}/%{name}
%config(noreplace) %{privoxyconf}/user.action
%config %{privoxyconf}/default.action
%config %{privoxyconf}/default.filter
-%config %{privoxyconf}/trust
+%config(noreplace) %{privoxyconf}/user.filter
+%config(noreplace) %{privoxyconf}/trust
# Please keep these alphabetized so its easier to find one that
# is not included.
%config %{privoxyconf}/templates/toggle-mini
%config %{privoxyconf}/templates/untrusted
-%config %{_sysconfdir}/logrotate.d/%{name}
-%config %attr(0744,root,root) %{_sysconfdir}/rc.d/init.d/%{name}
-%ghost %attr(-,root,root) %{_sysconfdir}/rc.d/rc0.d/K09%{name}
-%ghost %attr(-,root,root) %{_sysconfdir}/rc.d/rc1.d/K09%{name}
-%ghost %attr(-,root,root) %{_sysconfdir}/rc.d/rc2.d/S84%{name}
-%ghost %attr(-,root,root) %{_sysconfdir}/rc.d/rc3.d/S84%{name}
-%ghost %attr(-,root,root) %{_sysconfdir}/rc.d/rc4.d/K09%{name}
-%ghost %attr(-,root,root) %{_sysconfdir}/rc.d/rc5.d/S84%{name}
-%ghost %attr(-,root,root) %{_sysconfdir}/rc.d/rc6.d/K09%{name}
+# Attention, new defattr change here !
+%defattr(0644,root,root,0755)
+
+%config(noreplace) %{_sysconfdir}/logrotate.d/%{name}
+%config(noreplace) %attr(0755,root,root) %{_sysconfdir}/rc.d/init.d/%{name}
%{_mandir}/man1/%{name}.*
%changelog
-* Thu May 30 2002 Rodrigo Barbosa <rodrigob@tisbrasil.com.br>
-+ privoxy-2.9.15-2
-- Using sed to convert files from DOS to UNIX format (BUG: #562174)
+* Sat Sep 02 2006 Hal Burgiss <hal@foobox.net>
+- Include new file, user.filter. Do not overwrite "trust" file
+ (does anyone use this?).
+
+* Wed Mar 26 2003 Andreas Oesterhelt <andreas@oesterhelt.org>
+- Bump version for 3.0.2.
+
+* Wed Mar 19 2003 Hal Burgiss <hal@foobox.net>
+- Bump version for 3.0.1.
+
+* Tue Aug 25 2002 Hal Burgiss <hal@foobox.net>
+- Bump version for 3.0.0 :)
+
+* Tue Aug 06 2002 Hal Burgiss <hal@foobox.net>
+- Reset version for 2.9.20.
+
+* Tue Jul 30 2002 Hal Burgiss <hal@foobox.net>
+- Reset version for 2.9.18.
+
+* Sat Jul 27 2002 Hal Burgiss <hal@foobox.net>
+- Reset version and release for 2.9.16.
+
+* Fri Jul 12 2002 Karsten Hopp <karsten@redhat.de>
+- don't use ghost files for rcX.d/*, using chkconfig is the
+ correct way to do this job (#68619)
+
+* Fri Jul 05 2002 Rodrigo Barbosa <rodrigob@tisbrasil.com.br>
++ privoxy-2.9.15-8
+- Changing delete order for groups and users (users should be first)
+
+* Wed Jul 03 2002 Rodrigo Barbosa <rodrigob@tisbrasil.com.br>
++ privoxy-2.9.15-7
+- Changing sed expression that removed CR from the end of the lines. This
+ new one removes any control caracter, and should work with older versions
+ of sed
+
+* Tue Jul 02 2002 Rodrigo Barbosa <rodrigob@tisbrasil.com.br>
++ privoxy-2.9.15-6
+- Fixing defattr values. File and directory modes where swapped
+
+* Tue Jul 02 2002 Rodrigo Barbosa <rodrigob@tisbrasil.com.br>
++ privoxy-2.9.15-5
+- Bumping Release number (which should be changed every time the specfile
+ is)
+
+* Tue Jul 02 2002 Hal Burgiss <hal@foobox.net>
++ privoxy-2.9.15-4
+- Fix typo in templates creation.
+
+* Wed Jun 26 2002 Rodrigo Barbosa <rodrigob@tisbrasil.com.br>
++ privoxy-2.9.15-4
+- Fixing issues created by specfile sync between branches
+ - Correcting the release number (WARNING)
+ - Reintroducing text file conversion (dos -> unix)
+ - Reconverting hardcoded directories to macros
+ - Refixing ownership of privoxy files (now using multiple defattr
+ definitions)
+
+* Thu Jun 20 2002 Karsten Hopp <karsten@redhat.de>
+- fix several .spec file issues to shut up rpmlint
+ - non-standard-dir-perm /var/log/privoxy 0744
+ - invalid-vendor Privoxy.Org (This is ok for binaries compiled by privoxy
+ members, but not for packages from Red Hat)
+ - non-standard-group Networking/Utilities
+ - logrotate and init scripts should be noreplace
* Mon May 27 2002 Hal Burgiss <hal@foobox.net>
+ privoxy-2.9.15-1
-- Index.html is now privoxy-index.html.
+- Index.html is now privoxy-index.html for doc usage.
+
+* Sat May 25 2002 Hal Burgiss <hal@foobox.net>
++ privoxy-2.9.15-1
+- Add html man page so index.html does not 404.
* Fri May 24 2002 Hal Burgiss <hal@foobox.net>
+ privoxy-2.9.15-1
additional "-r @" flag.
# $Log: privoxy-rh.spec,v $
-# Revision 1.35 2002/05/28 03:56:59 hal9
-# Index.html re-vamped as privoxy-index.html for docs.
+# Revision 1.45 2006/07/18 14:48:47 david__schmidt
+# Reorganizing the repository: swapping out what was HEAD (the old 3.1 branch)
+# with what was really the latest development (the v_3_0_branch branch)
+#
+# Revision 1.33.2.22 2004/01/30 17:09:29 oes
+# Bumped version for 3.0.3
+#
+# Revision 1.33.2.21 2003/03/26 00:25:00 oes
+# Bump version for 3.0.2
+#
+# Revision 1.33.2.20 2003/03/20 03:27:11 hal9
+# Bump version for 3.0.1 pending release.
+#
+# Revision 1.33.2.19 2002/08/25 23:36:03 hal9
+# Bump version for 3.0.0.
+#
+# Revision 1.33.2.18 2002/08/10 11:28:50 oes
+# Bumped version
+#
+# Revision 1.33.2.17 2002/08/07 01:08:49 hal9
+# Bumped version to 2.9.18.
+#
+# Revision 1.33.2.16 2002/08/05 08:42:13 kick_
+# same permissions, same runlevels as all the other initscripts
+#
+# Revision 1.33.2.15 2002/07/30 21:51:19 hal9
+# Bump version to 2.9.17.
+#
+# Revision 1.33.2.14 2002/07/27 21:58:16 kick_
+# bump version
+#
+# Revision 1.33.2.13 2002/07/27 21:39:41 kick_
+# condrestart raised an error during an fresh install when privoxy wasn't already running
+#
+# Revision 1.33.2.12 2002/07/27 15:47:10 hal9
+# Reset version and release for 2.9.16.
+#
+# Revision 1.33.2.11 2002/07/25 09:47:57 kick_
+# this caused some errors during a fresh installation. It's unnecessary to call an extra program (/bin/true) to set the error code to 0
+#
+# Revision 1.33.2.10 2002/07/12 09:14:26 kick_
+# don't use ghost files for rcX.d/*, chkconfig is available to do this job. Enable translation of error messge
+#
+# Revision 1.33.2.9 2002/07/05 17:16:19 morcego
+# - Changing delete order for groups and users (users should be first)
+#
+# Revision 1.33.2.8 2002/07/03 20:46:24 morcego
+# - Changing sed expression that removed CR from the end of the lines. This
+# new one removes any control caracter, and should work with older versions
+# of sed
+#
+# Revision 1.33.2.7 2002/07/02 18:16:48 morcego
+# - Fixing defattr values. File and directory modes where swapped
+#
+# Revision 1.33.2.6 2002/07/02 17:38:10 morcego
+# Bumping Release number
+#
+# Revision 1.33.2.5 2002/07/02 11:43:20 hal9
+# Fix typo in templates creation.
+#
+# Revision 1.33.2.4 2002/06/26 17:32:45 morcego
+# Integrating fixed from the main branch.
+#
+# Revision 1.33.2.3 2002/06/24 12:13:34 kick_
+# shut up rpmlint. btw: The vendor tag should be set in you .rpmmacros file, not in the spec file!
+#
+# Revision 1.33.2.2 2002/05/28 02:39:38 hal9
+# Replace index.html with privoxy-index.html for docs.
#
-# Revision 1.34 2002/05/25 22:09:58 hal9
-# Add html man page to keep index.html from breaking (untested).
+# Revision 1.33.2.1 2002/05/26 17:20:23 hal9
+# Add images to doc dirs.
#
# Revision 1.33 2002/05/25 02:08:23 hal9
# Add doc/images directory.